HT-H4500
5.1CH Blu-ray™
Home Entertainment System
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
This Nanum Gothic Eco font is provided by NAVER.
Download from Www.Somanuals.com. All Manuals Search And Download.
●
●
●
●
Do not allow children to hang on the product.
Connect this equipment to an outlet on a circuit that
the receiver is not connected to.
Store the accessories (battery, etc.) in a location safely
out of the reach of children.
Consult the dealer or an experienced radio/TV
technician for help.
●
●
●
Do not install the product in an unstable location such
as a shaky self, a slanted floor, or a location exposed
to vibration.
This class B digital product meets all requirements
of the Canadian Interference - Causing Equipment
Regulations.
Do not drop or strike the product. If the product is
damaged, disconnect the power cord and contact a
service center.
CLASS 1 LASER pROdUCT
This product is classified as a CLASS 1 LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
To clean this apparatus, unplug the power cord from
the wall outlet and wipe the product using a soft,
dry cloth. Do not use any chemicals such as wax,
benzene, alcohol, thinners, insecticide, air fresheners,
lubricants, or detergent. These chemicals can damage
the appearance of the product or erase the printing
on the product.
Complies with 21CFR 1040.10 except for deviations
pursuant to Laser Notice No. 50, dated June 24, 2007.
dANGER :
●
●
Do not expose this apparatus to dripping or splashing.
Do not put objects filled with liquids, such as vases on
the apparatus.
VISIBLE AND INVISIBLE LASER RADIATION WHEN
OPEN. AVOID DIRECT EXPOSURE TO BEAM.
(FDA 21 CFR)
●
●
Do not dispose of batteries in a fire.
Do not plug multiple electric devices into the same
wall socket. Overloading a socket can cause it to
overheat, resulting in a fire.
CAUTION :
●
CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID EXPOSURE TO THE BEAM (IEC
60825-1)
●
There is danger of an explosion if you replace the
batteries used in the remote with the wrong type of
battery. Replace only with the same or equivalent
type.
●
THIS PRODUCT UTILIZES A LASER. USE OF
CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN THE COVER. DO NOT
REPAIR THE PRODUCT YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
WARNING :
●
TO PREVENT THE SPREAD OF FIRE,
KEEP CANDLES AND OTHER ITEMS
WITH OPEN FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
This product contains chemicals known to the State of
California to cause cancer and reproductive toxicity.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1
LASER PRODUCT
LASER PRODUKT
LASER LAITE
●
LASER APPARAT
FCC NOTES (for U.S.A)
PRODUCTO LÁSER CLASE 1
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on.
Important Safety Instructions
Read these operating instructions carefully before using
the unit. Follow all the safety instructions listed below.
Keep these operating instructions handy for future
reference.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
If interference is present, the user is encouraged to try to
correct the interference by one or more of the following
measures:
4. Follow all instructions.
●
Reorient or relocate the receiving antenna.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
●
Increase the separation between the equipment and
receiver.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
3 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
●
●
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including AV receivers) that produce heat.
Do not use the 3D Active Glasses for other purposes
(such as general eyeglasses, sunglasses, protective
goggles, etc.)
Do not use the 3D function or 3D Active Glasses while
walking or moving around. Using the 3D function or
3D Active Glasses while moving around may cause
you to bump into objects, trip, and/or fall, and cause
serious injury.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
●
If you want to enjoy 3D content, connect a 3D device
(3D compliant AV receiver or TV) to the product’s
HDMI OUT port using a high-speed HDMI cable. Put
on 3D glasses before playing the 3D content.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where it exits the
apparatus.
●
●
The product outputs 3D signals only through an HDMI
cable connected to the HDMI OUT port.
The video resolution in 3D play mode is fixed to
the resolution of the original 3D video. You can not
change the resolution.
11. Only use attachments/accessories specified by the
manufacturer.
●
Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not
operate properly in 3D play mode.
12. Use only with the cart, stand,
tripod, bracket, or table
specified by the manufacturer,
or sold with the apparatus.
When a cart is used, use
caution when moving the
cart/apparatus combination to avoid injury from
tip-over.
●
●
You must use a high-speed HDMI cable for proper
output of the 3D signal.
Stay at least three times the width of the screen from
the TV when watching 3D images. For example, if
you have a 46 inch screen, stay 138 inches (11.5 feet)
from the screen.
13. Unplug this apparatus during lightning storms or
●
●
Place the 3D video screen at eye level for the best 3D
picture.
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as when the power-
supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has been
dropped.
When the product is connected to some 3D devices,
the 3D effect may not function properly.
●
●
This product does not convert 2D content into 3D.
“Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of
the Blu-ray Disc Association.
3D Precautions
IMPORTANT HEALTH AND SAFETY INFORMATION FOR
3D PICTURES.
Read and understand the following safety information
before using the 3D function.
●
Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea, and
headaches.
If you experience any such symptom, stop viewing 3D
TV, remove the 3D Active Glasses, and rest.
●
Watching 3D images for an extended period of time
may cause eye strain. If you feel eye strain, stop
viewing 3D TV, remove your 3D Active Glasses, and
rest.
●
A responsible adult should frequently check on
children who are using the 3D function.
If there are any reports of tired eyes, headaches,
dizziness, or nausea, have the child stop viewing 3D
TV and rest.
Download from Www.Somanu4als-.cEonmg.liAshll Manuals Search And Download.
Contents
GETTING STARTEd
NETWORk SERvICES
29 Using BD-LIVE™
6
6
7
7
8
Accessories
Speaker Components
Front Panel
29 Using DLNA
29 Apps
Rear Panel
30 Using Opera TV Store
Remote Control
AppENdIx
CONNECTIONS
Connecting the Speakers
31 Additional Information
32 Disk and Format Compatibility
37 Troubleshooting
40 Specifications
9
10 Connecting to a Network Router
11 Connecting to a TV and External Devices
41 Licenses
SETTINGS
12 The Initial Settings Procedure
13 The Home Screen at a Glance
13 Accessing the Settings Screen
14 Settings Menu Functions
16 Network Setup
■
Figures and illustrations in this User Manual
are provided for reference only and may differ
from actual product appearance.
18 Upgrading Software
19 Setting Up DLNA
pLAyING CONTENT
20 Switching the Source Device
20 Playing Commercial Discs
20 Playing a Disc with User Recorded Content
21 Playing Files on a USB Device
22 Controlling Video Playback
23 Playing a Pre-Recorded Commercial Audio Disc
24 Controlling Music Playback
25 Playing Photo Contents
26 Listening to the Radio
26 Using Bluetooth
28 Using the Special Effects Remote Control
Buttons
5 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Check the box for the accessories and speaker components listed or shown below.
Accessories
●
●
●
Remote Control (AH59-02533A)
User Manual (AH68-02672A)
Batteries (AAA size) (4301-000116)
power Cable (3903-000598)
FM Antenna (AH42-00021A)
Speaker Components
Center
Speaker Cable
Front x 2
Surround x 2
x 6
Subwoofer
Download from Www.Somanu6als-.cEonmg.liAshll Manuals Search And Download.
Front Panel
dISpLAy ICONS
FUNCTION
STOp
pLAy/pAUSE
vOLUME
CONTROL
OpEN/CLOSE
pOWER
dISpLAy
5V 0.5A
dISC TRAy
REMOTE CONTROL SENSOR
USB
When the product is on, do not let children touch the product's surface. It will be hot.
To upgrade the product's software through the USB jack, you must use a USB flash drive.
✎
✎
✎
When the product displays a Blu-ray Disc menu, you cannot start the movie by pressing the
/
6
button on the product or the remote. To play the movie, you must select Play Movie or Start in the
disc menu, and then press the button.
v
If you are using the Internet or are playing content from a USB device on your TV through the home
theater, you cannot select the Bd/dvd mode with the FUNCTION button. To select the Bd/dvd
mode, exit the Internet or stop the content you are playing on the TV, and then select the Bd/dvd
mode.
✎
Rear Panel
AUx IN
* FM ANTENNA
HdMI OUT
COOLING FAN
SURROUND
SURROUND
SpEAkER OUTpUT
CONNECTORS
pOWER CORd
ExTERNAL dIGITAL
AUdIO IN (OpTICAL)
LAN TERMINAL
* Connecting the FM Antenna
1. Connect the supplied FM antenna to the FM ANT Jack.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to
a wall or other rigid surface.
Maintain a minimum of 4 inches of clear space on all sides of the home theater to ensure adequate
ventilation.
✎
Do not obstruct the cooling fan or ventilation holes.
This product does not receive AM broadcasts.
✎
7 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Remote Control
Tour of the Remote Control
Turn the product on and off.
Press to select Home Theater's
mode. (BD/DVD, D. IN, AUX,
etc.).
FUNCTION
MUTE
To open and close the disc tray.
VOLUME
Adjust the volume.
-
+
2
5
8
0
Cut off the sound temporarily.
1
4
3
6
Press numeric buttons to
operate options.
7
9
DISC MENU
TITLE MENU
Use to enter the Popup
menu/Title menu.
Press to search backwards or
forwards.
Press to view the disc menu.
POPUP
Press to skip backwards or forwards.
Press to play a disc or files.
Press to pause playing.
Press to stop a disc or files.
SUBTITLE
HOME
REPEAT
Allows you to repeat a title,
chapter, track or disc.
Selects the disc subtitle language.
Press to move to the Home screen.
TOOLS
INFO
Use to display the playback
information when playing
a Blu-ray/DVD disc or files.
Press to use the Tools menu.
Select on-screen menu items
and change menu values.
RETURN
A
EXIT
Press to exit the menu.
Return to the previous menu.
Use to set a preset radio frequency.
TUNER
MEMORY MO/ST
These buttons are used both for
menus on the product and also
several Blu-ray Disc functions.
B
C
D
TV SOUND DSP/EQ
TUNING
Select MONO or STEREO for radio
broadcasts.
UP
DOWN
Press to direct audio signal to home
theater speaker or TV speaker.
Search for active FM stations and
to change channels.
Select the desired DSP/EQ audio
mode.
Installing batteries in the Remote Control
Make sure to match the “+” and “–” ends of the batteries
with the diagram inside the compartment.
Assuming typical usage, the batteries last for about one
year.
✎
✎
✎
Battery size: AAA
The remote control can be used up to approximately 23
feet
(7 meters) from the product in a straight line.
Download from Www.Somanu8als-.cEonmg.liAshll Manuals Search And Download.
Connections
This section describes various methods of connecting the product to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
position of the product
Place it on a stand or cabinet shelf, or
under the TV stand.
Front (R)
Center
Selecting the Listening position
Subwoofer
The listening position should be
located about 2.5 to 3 times the TV's
screen size away from the TV. For
example, if you have a 46 inch screen,
locate the listening position 115 to
138 inches (9.6 to 11.5 feet) from the
screen.
Surround (R)
product
Front (L)
Surround (L)
Place these speakers in front of your listening position, facing inwards (about
45°) toward you. Place the front speakers so that their tweeters will be at the
same height as your ear. Align the front face of the front speakers with the
front face of the center speaker or place them slightly in front of the center
speakers.
Front Speakers
It is best to install the Center Speaker at the same height as the front speakers.
You can also install it directly over or under the TV.
Center Speaker
Place these speakers to the side of your listening position. If there isn't enough
room, place these speakers so they face each other. Position them about 2 to 3
feet (60 to 90cm) above your ear, facing slightly downward.
Surround Speakers
* Unlike the front and center speakers, the surround speakers are used mainly
for sound effects. Sound will not come from them all the time.
Subwoofer
The position of the subwoofer is not so critical. Place it anywhere you like.
* The appearance of your speakers may differ from the illustrations in this manual.
* Each speaker has a colored label on its back or underside. Each cable has a single colored band near its end.
Match the band on each cable to the speaker label by color, and then connect the cable to the speaker. See
9 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Speaker Cable Connections
1. Match each speaker cable bundle to the correct speaker by matching the color coded plug on each
bundle to the colored sticker on the bottom or back of each speaker.
2. Connect the speaker wire plugs from each speaker to the back of the product by matching the colors of
the speaker plugs to the colors of the speaker jacks.
Front Speaker (L)
Center Speaker
Surround Speaker (L)
Surround Speaker (R)
SURROUND
SURROUND
Subwoofer
Front Speaker (R)
If you place a speaker near your TV set, the screen color may be distorted because of the magnetic
field.
✎
| CAUTION |
▶
If you want to install the speakers on the wall, fasten screws or nails (not provided) firmly to the wall
wherever you want to hang a speaker, and then, using the hole in the rear of each speaker, carefully
hang each speaker on a screw or nail.
▶
▶
▶
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.
Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands
or alien substances into the duct (hole) of the subwoofer speaker.
▶
Do not hang the subwoofer on the wall through the duct (hole).
Connecting to a Network Router
SURROND
L
SURROUND
R
Broadband
modem
Broadband
service
Broadband
service
Or
Broadband modem (with integrated router)
Router
Your router or your Internet Service Provider's policies may prevent the product from accessing
Samsung's software update server. If this occurs, contact your Internet Service Provider (ISP) for more
information.
✎
DSL users, please use a router to make a network connection.
✎
✎
To use the DLNA function, you must connect a PC to the network as shown in the figure.
10 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a TV and External Devices
SURROUND
SURROUND
L
R
Red
R
White
W
Method 1
Method 2
External devices
AUDIO OUT
OPTICAL OUT
HDMI IN
Connecting to a Tv
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your TV. If the TV supports ARC, you can hear the audio from your TV through the home theater with
only this cable connected. See page 15 in this manual and the section on ARC in your TV's user's manual
for details.
Connecting to External devices
Two methods of connecting external devices to your home theater are explained below.
Method 1 AUx IN : Connecting an External Analog Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on
the external analog component.
Select the AUx mode.
●
Be sure to match the colors on the cable plugs to the colors on the input and output jacks.
Method 2 OpTICAL : Connecting an External digital Audio Component
Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite
Receivers (Set-Top-Boxes) to the home theater. Using a digital optical cable (not supplied), connect the Optical
Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device using a digital
optical cable.
Select the d. IN mode.
To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
✎
✎
✎
This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not
supported.
Selecting an External device to Use
To select an external device after you have connected it, press the FUNCTION button. Each time you press the
button, the mode changes in this order : Bd/dvd d. IN AUx FM BT
;
;
;
;
11 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
4:3 pan-Scan - For older, standard screen,
analog TVs. Displays 4:3 pictures in full screen
and 16:9 pictures in Pan-Scan format that fills
the screen, but cuts off the left and right sides
of the picture and enlarges the middle vertically.
The Initial Settings Procedure
●
The Home menu will not appear if you do not
configure the initial settings.
●
The OSD (On Screen Display) may change in
this product after you upgrade the software
version.
5. The Network - Wired screen appears.
- If you have a network with dynamic IP
addresses - and most people do - select Auto,
●
The access steps may differ depending on the
menu you selected.
press the
button, and then go to Step 6.
v
- If you have a network with static IP addresses,
we suggest you select Skip by pressing the
BLUE (d) button. (See page 16)
1. Turn on your TV after connecting the product,
and then turn on the product. When you turn
on the product for the first time, the product
automatically displays the Initial Settings
Language screen.
- If you have no network, select Skip by
pressing the BLUE (d) button. The Initial
Settings Complete screen appears, and then
the Home screen appears.
2. Press the ▲▼ buttons to select the desired
If you skip network setup here or the setup
does not work correctly, you can set up the
product's network connection later. (See page
✎
language, and then press the
button.
v
3. Press the
button to start function setup.
v
Initial Settings
Initial Settings | Network - Wired
TV Aspect and Network will be set.
Choose the method to configure Internet Protocol (IP). Please make sure that the Ethernet
cable is connected.
Each setting may be changed later under "Settings"
Auto : Configure IP automatically.
Start
Auto
Manual
Previous
Select
a
"
a Previous
d Skip
< Move
" Select
4. The Tv Aspect screen appears. Press the ▲▼
6. The product verifies the network connection
buttons to select a TV aspect ratio, and then
and then connects to the network. When it is
press the
button.
v
done, press the
button. The "Initial settings
v
You have four choices:
completed." screen appears, and then the
Home screen appears.
16:9 Original - For widescreen TVs. Displays
widescreen pictures in their original 16:9 format
and 4:3 pictures (the old, standard format) in
4:3 pillar box format with black bars on the left
and right.
16:9 Full - For widescreen TVs. Displays
widescreen pictures in their original 16:9 format
and expands 4:3 pictures to fill the 16:9 screen.
4:3 Letter Box - For older, standard screen,
analog TVs. Displays 4:3 pictures in full screen
and 16:9 pictures in letter box format that
retains the 16:9 aspect ratio but puts black bars
above and below the picture.
Initial Settings | Network - Wired
MAC Address (d0:66:7b:dc:28:fc)
IP Address, Subnet Mask, Gateway, DNS Server
Gateway Ping
✓
✓
✓
✓
Internet Service Test
Your network is operating properly. If you still have a network problem, contact your
network service provider.
OK
" Select
12 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
If you want to display the Initial Settings screen
again and make changes, select the Reset
✎
✎
More
5
A list of useful and popular apps we recommend.
Change device
If you use an HDMI cable to connect the
product to an Anynet+ (HDMI-CEC)-compliant
Samsung TV and 1.) You have set the Anynet+
(HdMI-CEC) feature to On in both the TV
and the product and 2.) You have set the
TV to a language supported by the product,
the product will select that language as the
preferred language automatically.
6
Displays a list of external devices connected to the
main unit. Switch to the desired device.
Function
7
Use for switching to an external device, and
for radio and mode switching for a Bluetooth
connection. You can use the remote control’s
The Home Screen at a Glance
FUNCTION button and the main unit’s
button
for mode switching.
1
2
Settings
8
Play Disc
Photos
Videos
Music
Set various functions to suit your personal
preferences.
To play or view video, photo, music files
✎
located on your PC, you must connect your
home theater and PC to a home network and
you must download, install, and configure the
DLNA software on your PC. (See page 19)
Blu-ray
Accessing the Settings Screen
App 1 App 2 App 3 App 4
Opera TV More
Store
Change Device Function
Settings
1. Select Settings on the Home screen, and then
press
. The Settings screen appears.
3
45 6 7 8
v
Settings
Display
play disc
1
3D Settings
TV Aspect Ratio
BD Wise
: 16:9 Original
Audio
The disc currently in the tray is displayed.
Press to start playing the disc.
: Off
Network
System
v
Resolution
: Auto
: Off
photos/videos/Music
2
Movie Frame (24Fs)
HDMI Color Format
HDMI Deep Color
Progressive Mode
Language
Security
General
Support
: Auto
: Off
Play photos, videos, or music content from
Disc, USB, PC, or mobile devices.
: Auto
Apps
3
Access various for pay or free-of-charge
applications.
2. To access the menus, sub-menus, and options
on the Settings screen, please refer to the
remote control illustration. (See page 14)
Opera Tv Store
4
Makes the Web-based App for TV available for
use.
If you leave the product in the stop mode for
✎
more than 5 minutes without using it, a screen
saver will appears on your TV. If the product is
left in the screen saver mode for more than 20
minutes, the power automatically turns off.
13 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Buttons on the Remote Control Used for
the Settings Menu
Settings Menu Functions
SUBTITLE
HOME
REPEAT
display
3d Settings
1
2
TOOLS
INFO
Set up the 3D related functions.
3d Blu-ray playback Mode: Select whether to play
a Blu-ray Disc with 3D contents in 3D Mode. If
you move to the Home menu while in 3D mode,
the product will switch to 2D automatically.
ꢀ
3
4
RETURN
EXIT
Screen Size: Enter the size of the TV attached
to the product. The product will automatically
adjust the 3D output to the screen size of the TV.
ꢀ
HOME Button : Press to move to the Home
screen.
1
Carefully read the health and safety information
✎
RETURN Button : Press to return to the
previous menu.
2
3
4
Tv Aspect Ratio
(ENTER) / dIRECTION Button :
v
●
Press
$%_+
an item.
to move the cursor or select
Lets you adjust the output of the product to the
●
Press the
button to activate the
v
Bd Wise
currently selected item or confirm a
setting.
Bd Wise is Samsung’s latest inter-connectivity
feature. When you connect a Samsung product
and a Samsung TV with Bd Wise to each other
via HDMI, and Bd Wise is on in both the product
and TV, the product outputs video at the video
resolution and frame rate of the Blu-ray/DVD Disc.
ExIT Button : Press to exit the current
menu.
detailed Function Information
Each Settings function, menu item, and individual
option is explained in detail on-screen. To view an
explanation, use the ▲▼◀▶ buttons to select the
function, menu item, or option. The explanation will
usually appear on the bottom of the screen.
Resolution
Lets you set the output resolution of the HDMI
video signal to Bd Wise, Auto, 1080p, 1080i,
720p, 480p. The number indicates the number
of lines of video per frame. The i and p indicate
interlaced and progressive scan, respectively. The
more lines, the higher quality.
A short description of each Settings function starts
on this page. Additional information on some of the
functions is also in the Appendix of this manual.
Movie Frame (24Fs)
Setting the Movie Frame (24Fs) feature to Auto lets
the product adjust its HDMI output to 24 frames
per second automatically for improved picture
quality if attached to a 24Fs compatible TV.
●
You can enjoy the Movie Frame (24Fs) feature
only on a TV supporting this frame rate.
●
Movie Frame is only available when the product
is in the HDMI 1080p output resolution modes.
HdMI Color Format
Lets you set the color space format for the HDMI
output to match the capabilities of the connected
device (TV, monitor, etc).
14 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
HdMI deep Color
dynamic Range Control
Lets you set the product to output video from
the HDMI OUT jack with Deep Color. Deep Color
provides more accurate color reproduction with
greater color depth.
Lets you apply dynamic range control to Dolby
Digital, Dolby Digital Plus, and Dolby TrueHD audio.
Auto: Automatically controls the dynamic range
of Dolby TrueHD audio, based on information
in the Dolby TrueHD soundtrack. Also turns
dynamic range control off for Dolby Digital and
Dolby Digital Plus.
ꢀ
progressive Mode
Lets you improve picture quality when viewing DVDs.
Off: Leaves the dynamic range uncompressed,
letting you hear the original sound.
ꢀ
ꢀ
Audio
On: Turns dynamic range control on for all three
Dolby formats. Quieter sounds are made louder
and the volume of loud sounds is reduced.
Speaker Settings
Lets you adjust the following speaker settings and
turn the test tone on and off so you can test the
speakers.
downmixing Mode
Lets you select the multi-channel downmix method
that is compatible with your stereo system. You can
choose to have the product downmix to Normal
Stereo or to Surround Compatible.
Level: Lets you adjust the relative loudness of each
speaker from 6dB to -6dB. For example, if you like
deep bass, you can increase the loudness of the
subwoofer by 6db.
ꢀ
ꢀ
ꢀ
distance: Lets you adjust the relative distance of
each speaker from the listening position up to
30 feet. The farther the distance, the louder the
speaker will be.
Audio Sync
When the product is attached to a digital TV, lets
you adjust the audio delay so that the audio syncs
with the video. You can set the delay between 0
and 300 milliseconds.
Test Tone: Lets you run the Test Tone function so you
can test your adjustments. Setting Test Tone to On
turns the Test Tone on. Setting it to Off turns it off.
Network
Speaker Selection
Wired Network Settings
Lets you select which speakers you want active,
either the TV's speakers or the home theater's
speakers.
For more information about this function see
Network Test
Audio Return Channel
Lets you test the Internet Protocol setup to see if
it is working correctly.
Lets you direct the sound from the TV to the
Home Theater speakers. Requires an HDMI
connection and an Audio Return Channel (ARC)
compatible TV.
Network Status
●
If Audio Return Channel is set to on and you are
using an HDMI cable to connect the product to
the TV, digital optical input will not work.
Lets you check the current network and Internet
status.
device Name
●
If Audio Return Channel is set to Auto and
you are using an HDMI cable to connect the
product to the TV, ARC or digital optical input is
selected automatically.
Lets you assign an identifying name to the
product. You use this name to identify the
product when you are connecting external
devices (smart phones, tablets, etc.) to it.
digital Output
Bd-Live Internet Connection
Lets you set the digital Output to match the
capabilities of the AV receiver you’ve connected to
the product. For more details, please refer to the
Lets you allow or prohibit an Internet connection
for the BD-Live service.
15 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Change pIN
System
Changes the 4-digit PIN used to access security
functions.
Initial Settings
Lets you re-run the Initial Settings procedure. (See
General
Quick Start
Time Zone
You can turn on the power quickly by decreasing
the boot time.
Lets you specify the time zone that is applicable to
your area.
If this function is set to On, Standby power
✎
consumption will be increased. (About 12W
~ 20W)
Support
Software Upgrade
Anynet+ (HdMI-CEC)
For more information about this function see
Anynet+ is a convenient function that offers
linked operations with other Samsung products
that have the Anynet+ feature and lets you control
those products with one Samsung TV remote.
To operate this function, you must connect this
product to an Anynet+ Samsung TV using a HDMI
cable.
Contact Samsung
Provides contact information for assistance with
your product.
Terms of Service Agreement
Bd data Management
View the general disclaimer regarding third party
contents and services.
Lets you manage the contents you downloaded
through a Blu-ray disc that supports the BD-Live
service. You can view the information about the
USB device you are using for BD Live data storage
including the storage space. You can also delete
BD Live data and change the device.
Reset
Reverts all settings to their defaults except for the
network. Requires that you enter your security
PIN. The default security PIN is 0000.
Language
Network Setup
Lets you select the language you prefer for the
On-Screen Menu, disc menu, etc.
When you connect this product to a network, you
can use network based applications and functions
such as BD-LIVE and upgrade the product's software
through the network connection.
●
The selected language will only appear if it is
supported on the disc.
Security
Configuring your Network Connection
If you skipped network setup during the Initial Setup,
follow the instructions below to configure the home
theater's network connection.
The default PIN is 0000. Enter the default PIN to
access the security function if you haven't created
your own PIN.
Before you begin, contact your ISP to find out if your
IP address is static or dynamic. If it is dynamic, we
recommend you use the automatic procedure below.
If it is static, you must use the manual procedure
that follows.
Bd parental Rating
Prevents playback of Blu-ray Discs with a rating
equal to or above a specific age rating unless you
enter the PIN.
dvd parental Rating
Prevents playback of DVDs with a rating above a
specific numerical rating unless you enter the PIN.
16 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
●
Settings
Dis
Before you begin, confirm that the product is
connected to your router with a network cable.
Wired Network Settings
: Manual
Au
Internet Protocol Setup
Ğ
Automatic
Ne
0
0
0
0
0
0
IP Address
:
:
:
To start the configuration process, follow these steps:
Subnet Mask
Sys
255 255 255
1. In the Home menu, select Settings, and then
Gateway
0
0
0
La
press the
button.
v
Se
DNS
: Manual
:
2. Select Network, and then press the
button.
v
DNS Server
Ge
0
0
0
0
3. Select Wired Network Settings, and then press
the button.
Su
> Move
" Select
' Return
v
The Wired Network Settings screen appears.
4. Press the button on the Internet protocol
+
1. Follow the first four steps in the Automatic
procedure, but select Manual instead of Auto in
Step 4.
Setup menu.
Use
the
button to select Auto, and then press
button.
$%
v
2. Press the ▼ button to go to the first entry field
(IP Address).
Settings
3. Use the number buttons on your remote to
Wired Network Settings
Dis
enter numbers.
Au
Internet Protocol Setup
: Auto
4. When done with each field, use the ▶ button
to move successively to the next field.
You can also use the other arrow buttons to
move up, down, and back.
Ne
0
0
0
0
0
0
0
0
0
0
IP Address
:
Subnet Mask
Sys
:
:
0
0
Gateway
La
Se
DNS
: Auto
5. Enter the Ip Address, Subnet Mask, and
DNS Server
Ge
:
0
0
0
0
Gateway values.
Su
6. Press the ▼ button to go to dNS.
> Move
" Select
' Return
7. Press the ▼ button to go to the first DNS entry
field. Enter the numbers as above.
5. The Network function acquires and fills in
the values for Ip Address, Subnet Mask, etc.,
automatically.
8. Press the RETURN button on your remote.
9. Select Network Test, and then press
. When
v
the test is completed, press the RETURN button
to exit to the previous screen.
6. After the Network function has acquired the
network values, press the RETURN button.
10. Select Network Status, and then press
.
v
7. Select Network Test, and then press
. The
v
home theater validates the network connection.
When it is done, press the RETURN button.
11. The Network Status screen appears.
The product verifies the network connection
and then connects to the network. When it is
Ğ
Manual
done, highlight Ok, and then press
.
v
If you have a static IP address or the Automatic
procedure does not work, you’ll need to set the
Network Settings values manually. You can get the
Network Settings from your Internet Service Provider
(ISP).
17 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
By USB
Upgrading Software
The Software Upgrade menu allows you to
upgrade the product’s software for performance
improvements or additional services.
2. Click SUppORT on the top right of the page.
3. Enter the product's model number into the
search field. As you enter the model number, a
drop down will display products that match the
model number.
●
Never turn the product off or back on manually
during the update process.
●
The update is complete when the product turns
4. Left click your product's model number in the
off after restarting. Press the pOWER button to
drop down list.
turn on the updated product for your use.
5. On the page that appears, scroll down to and
●
Samsung Electronics takes no legal
then click Firmware Manuals & downloads.
responsibility for product malfunction
caused by an unstable Internet connection
or consumer negligence during a software
upgrade.
6. Click Firmware in the center of the page.
7. Click the ZIp icon in the File column on the right
side of the page.
8. Click Send in the first pop-up that appears.
Click Ok in the second pop-up to download
and save the firmware file to your PC.
1. In the Home menu, select Settings, and then
press the
button.
v
2. Select Support, and then press the
button.
v
9. Unzip the zip archive to your computer. You
should have a single folder with the same name
as the zip file.
3. Select Software Upgrade, and then press the
button.
v
4. Select one of the following methods:
10. Copy the folder to a USB flash drive.
●
By Online
11. Make sure no disc is inserted in the product,
and then insert the USB flash drive into the USB
port of the product.
●
By USB
●
Auto Upgrade Notification
5. Press the
button.
12. In the product’s menu, go to Settings > Support
v
Directions for each method begin below.
> Software Upgrade.
If you want to cancel the upgrade while the
upgrade software is downloading, press the
13. Select By USB.
✎
14. The home theater searches for the software on
the USB drive. When it finds the software, the
Update Request pop-up appears.
button.
v
By Online
15. Select Ok. The home theater turns off, turns
on, and then begins the upgrade. When the
upgrade is done, the home theater turns off.
Your product must be connected to the Internet to
use the By Online function. Remove all discs before
you begin.
16. Press the pOWER button to turn on the home
1. Select By Online, and then press the
button.
v
theater.
The Connecting to Server message appears.
There should be no disc in the product when
you upgrade the software using the USB Host
jack.
✎
2. If an update is available, a popup message
appears asking if you want to upgrade. If you
select yes, the product turns off automatically,
turns on, and then begins the upgrade.
When the software upgrade is done, check
the software details in the Software Upgrade
✎
3. The update progress popup appears. When
the update is completed, the product turns off
automatically again.
menu.
4. Press the pOWER button to turn on the
product.
18 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Find the DLNA install file on your disk, and then
Auto Upgrade Notification
double click the file.
If your product is connected to the network and you
set Auto Upgrade Notification on, the product will
notify you if a new software version is available with
a pop-up message.
10. In the pop-up that appears, click Run, and
then follow the directions that appear on your
screen.
1. Turn on the product.
Download the DLNA Installation/Instruction
manual from the same Software Tab by clicking the
corresponding PDF file symbol in the File column
on the right. The file, in PDF format, will download
and open. Follow the directions to install and setup
DLNA. You can view and/or save the file.
2. In the Software Upgrade menu, set Auto
Upgrade Notification to On.
If there is a new software version available, the
product will notify you with a pop-up message.
3. To upgrade the firmware, select yes. The
product turns off automatically, turns on, and
then begins the upgrade.
To use DLNA with your smart phone, you
✎
need to connect your home theater and smart
phone to the same network.
4. The update progress popup will appear. When
the update is complete, the product will turn
off automatically again.
5. Press the pOWER button to turn on the
product.
Setting Up DLNA
DLNA enables you to play music, video, and photo
files located in your PC using this product. To use
DLNA, you must connect the product to your PC
SAMSUNG PC Share Manager on the PC.
To download the dLNA Software
To use DLNA with your PC, you must install DLNA
software on your PC. You can download the PC
software and get detailed instructions for using
DLNA from the Samsung.com website.
2. Click SUppORT at the top of the page.
3. Enter the product's model number into the
search field. As you enter the model number, a
drop down will display products that match the
model number.
4. Left click your product's model number in the
drop down list.
5. On the page that appears, scroll down to and
then click Firmware Manuals & downloads.
6. Click the Software tab.
7. On the software tab, click the EXE icon on the
right side of the DLNA line.
8. In the first pop-up that appears, click Send. In
the second pop-up, click Save File.
19 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Content
Your home theater can play content located on
Blu-ray/DVD/CD discs, USB devices, PCs, smart
phones, tablets, and in Apps.
3. Press the button to close the disc tray.
^
Playback starts automatically.
4. If playback does not start automatically, press
To play content located on your PC or a mobile
device, you must connect the PC or mobile device
and the product to your network. To play content on
your PC, you must also download and install DLNA
network software or already have DLNA network
software on your PC.
the
button on the remote.
6
disc Storage & Management
Holding Discs
●
Fingerprints or scratches on
a disc may reduce sound and
picture quality or cause skipping.
-
PCs running Windows 7 and Windows 8 have
✎
DLNA software (Play To) built in.
Avoid touching the surface of a disc where data
has been recorded.
-
Switching the Source Device
Hold the disc by the edges so that fingerprints
will not get on the surface.
-
If two or more external devices are connected to the
main unit, you can use any of the three methods
described below to change the source device.
Do not stick paper or tape on the disc.
-
●
Cleaning Discs
If you get fingerprints or dirt on a
-
Method 1
disc, clean it with a mild detergent
diluted in water and wipe with a
soft cloth.
From the Home screen, use the ▲▼◀▶ buttons to
move to Change device, and then press
.
v
When cleaning, wipe gently from
the inside to the outside of the disc.
-
The Change device popup window will appear. Use
the ▲▼ buttons to move to the desired device, and
then press
.
Disc Storage
v
-
`
Do not keep in direct sunlight.
Method 2
`
Keep in a cool ventilated area.
If you move to photos, videos, Music or other file-
based contents, a list of folders and files will appear.
Press the REd (A) button to display the Change
device popup window, use the ▲▼ buttons to move
`
Keep in a clean protective jacket and store
vertically.
to the desired device, and then press
.
v
Playing a Disc with User Recorded
Content
Method 3
When a device is connected for the first time, a
popup window appears on which you can change
the source device by using the ◀▶ buttons.
You can play multimedia files you have recorded on
Blu-ray, DVD, or CD discs.
1. Place a user recorded disc into the disc tray with
the disc’s label facing up, and then close the
tray.
Playing Commercial Discs
2. Use the ◀▶ buttons to select the type of
1. Press the button to open the disc tray.
^
content you want to view or play - photos,
2. Place a disc gently into the disc tray with the
videos, or Music - and then press the
v
disc’s label facing up.
button.
OR
2-1. Select play disc from the Home screen. The play
disc screen appears. Use the ▲▼ buttons to
select the desired content type, photos, videos,
or Music.
20 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
3. A screen appears listing the contents of the
disc. Depending on how the contents are
arranged, you will see either folders, individual
files, or both.
3. If necessary, use the ▲▼◀▶ buttons to select
a folder, and then press the button.
v
4. Select a file to view or play, and then press the
button.
v
4. If necessary, use the ▲▼◀▶ buttons to select
5. Press the RETURN button to exit a folder or the
a folder, and then press the
button.
ExIT button to return to the Home screen.
v
explain how to control playback of videos,
music, and pictures on a USB device.
5. Use the ▲▼◀▶ buttons to select a file to view
or play, and then press the button.
v
6. Press the RETURN button one or more times to
exit a current screen, exit a folder, or to return
to the Home screen.
Method 2 : If the product is turned on after
you connect a USB device
Press the ExIT button to return directly to the
Home Screen.
1. Turn the product on.
explain how to control playback of videos,
music, and pictures on a disc.
2. Press Change device and select a USB device.
3. Use the ◀▶ buttons to select photos, videos,
or Music on the Home screen, and then press
the
button.
v
Playing Files on a USB Device
4. If necessary, use the ▲▼◀▶ buttons to select
a folder, and then press the button.
v
There are two methods you can use to play or view
multimedia files located on a USB device through
your product.
5. Select a file to view or play, and then press the
button.
v
6. Press the RETURN button to exit a folder or the
Method 1 : If you connect a USB device while
ExIT button to return to the Home screen.
the product is turned on
explain how to control playback of videos,
music, and pictures on a USB device.
1. The "New device connected." pop-up appears.
If you insert a disc when playing a USB device
or phone, the device mode changes to "Disc"
automatically.
✎
New device connected.
USB DISK
If your cellular phone is DLNA compatible, you
can play contents without connecting a USB
✎
Photos
Videos
Music
If the pop-up does not appear, go to Method
2.
✎
2. Use the ▲▼ buttons to select photos, videos,
or Music and then press the button.
v
Depending on how the contents are arranged,
you will see either folders, individual files, or
both.
21 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Content
Controlling Video Playback
Using the disc menu, title menu, popup
menu, and title list
2
You can control the playback of video content
located on a Blu-ray/DVD disc, USB device, mobile
device, or PC. Depending on the disc or contents,
some of the functions described in this manual may
not be available.
dISC MENU
During playback, press this button to display the
Disc menu.
TITLE MENU
Buttons on the Remote Control used for
During playback, press this button to display the
Title menu.
video playback
DISC MENU
TITLE MENU
●
If your disc has a playlist, press the GREEN (B)
POPUP
0
button to go to the playlist.
2
3
pOpUp MENU
1
During playback, press this button to display the
Popup menu.
SUBTITLE
HOME
REPEAT
Repeat playback
3
1. During playback, press the REpEAT button
playback related buttons
1
on the remote control.
The product does not play sound in Search, Slow,
or Step mode.
2. Press the ▲▼ buttons to select Off, Title,
Chapter, All or Repeat A-B, and then press
●
To return to normal speed playback, press the
the
button.
v
button.
6
Ğ
Repeat A-B
Starts playback.
6
1. Press the
button at the point where you
v
Stops playback.
want repeat play to start (A).
5
7
2. Press the
button at the point where you
v
Pauses playback.
want repeat play to stop (B).
During playback, press the
or
3
3. To return to normal play, press the REpEAT
button.
4
button again.
Fast Motion
play
Each time you press the
or
4
3
4. Press the
button.
v
button, the playback speed will
change.
Depending on the disc, the screen may not
display all repeat options.
✎
✎
In pause mode, press the
button.
4
The screen may not display Chapter or
Title immediately. Continue to press the
▲▼ buttons until your choice is inside the
applicable field.
Slow
Motion play Each time you press the
button,
4
the playback speed will change.
In pause mode, press the
Step Motion button.
To return to normal play, press the REpEAT
button again, press the ▲▼ buttons to
7
✎
✎
play
Each time you press the
a new frame appears.
button,
7
select Off, and then press the
button.
v
The screen may not display Repeat A-B
immediately. Continue to press the ▲▼
buttons until Repeat A-B is inside the
applicable field.
During playback, press the
or
1
button.
2
Skip Motion
Each time you press the
or
1
play
You must set point (B) at least 5 seconds of
playing time after point (A).
button, the disc moves to the
2
✎
previous or next chapter or file.
22 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TOOLS Menu
Subtitle
During playback, press the TOOLS button.
Lets you set the desired subtitle language.
Title
Angle
If there is more than one title on a disk or device,
lets you move to or select a desired title.
To view a scene from another angle. The Angle
option displays the number of angles available to
view (1/1, 1/2, 1/3, etc.).
playing Time
BONUSvIEW video
BONUSvIEW Audio
Lets you go to a specific playback point. Use the
numeric buttons to input the playback point.
Lets you set the desired Bonusview option.
Repeat Mode
Menu selections that appear only while a file
Lets you repeat a specific title, chapter, or marked
section.
plays
Full Screen
Audio Sync
Lets you set the desired full screen size. You
can select Original, Mode1 (larger), and Mode2
(largest).
Lets you adjust the audio delay so that the audio
syncs with the video. You can set the delay from
0 to 300 milliseconds.
Information
picture Settings
Select to view video file information.
Lets you set the picture mode.
■
Mode
Depending on the disc or storage device, the
Tools menu may differ. All options may not be
displayed.
✎
User : Lets you adjust the Brightness,
Contrast, Color, and Sharpness functions
-
manually.
dynamic : Choose this setting to increase
sharpness.
-
Creating a video playlist
You can create a playlist of video files in a way that
is nearly identical to the way you create a playlist of
Normal : Choose this setting for most viewing
applications.
Movie : This is the best setting for watching
movies.
-
-
Playing a Pre-Recorded Commercial
Audio Disc
Menu selections that appear only when a
Bd/dvd disc plays
1. Insert an Audio CD (CD-DA) or an MP3 Disc
into the disc tray.
Chapter
●
For an Audio CD (CD-DA), the first track will
be played automatically. Tracks on a disc
are played in the order in which they were
recorded on the disc.
Lets you move to a chapter that you want to
watch.
Audio
●
For an MP3 disc, press the ◀▶ buttons to
select Music, then press the
button.
v
Lets you set the desired audio language.
23 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Content
Fast play (Audio Cd [Cd-dA] only) :
Tools
During playback, press the
button.
or
3
4
TRACK 001
Repeat Mode
Rip
Track
4
Each time you press the
or
button,
3
4
> Move < Adjust ' Return
the playback speed will change.
TRACK 003
04:41
04:02
03:43
03:40
button : Pauses a track.
TRACK 004
TRACK 005
TRACK 006
5
6
7
00:00/00:00
button : Plays the currently selected
6
track.
CD
" Pause
c Select
Tools
' Return
Repeating Tracks
You can set the product to repeat tracks.
2. To play a particular track, use the ▲▼ buttons
1. During music playback, press the TOOLS
on the remote to select the track, and then
button.
press the
button.
v
2. Use
button to select Off, Track or One, All
_+
or Shuffle in Repeat Mode, and then press the
button.
For more information about playing music, See
Controlling Music Playback below.
✎
v
Controlling Music Playback
Creating a Music playlist
1. If playing music from a commercial CD or DVD,
You can control the playback of music content
located on a DVD, CD, USB, mobile device, or PC.
Depending on the disc or contents, some of the
functions described in this manual may not be
available.
press the
or RETURN button. The Music List
5
Screen appears. If you are creating a playlist
from music on a user created disk or USB
device, access the Music list as described on
Buttons on the Remote Control used for
Music playback
2. Press the ▲▼◀▶ buttons to move to a desired
file, and then press the yELLOW (C) button
to select it. Repeat this procedure to select
additional files.
1
4
2
5
8
0
3
6
3. If you want to select all files, press the TOOLS
1
button, use the ▲▼ buttons to select Select All,
and then press
. If you want to deselect all
v
7
9
files, press the TOOLS button, select deselect
DISC MENU
TITLE MENU
POPUP
All, and then press
.
v
4
Music TRACK 001
1 files selected 1/2 Page
2
3
✓
5
6
TRACK 001
05:57
TRACK 002
04:27
TRACK 003
04:07
TRACK 004
03:41
TRACK 005
03:17
TRACK 006
03:35
NUMBER buttons : During Playlist playback,
press the desired track number. The
selected track is played.
1
TRACK 007
03:47
TRACK 008
03:49
TRACK 009
03:53
TRACK 010
03:45
Skip : During playback, press the
or
1
2
button to move to the previous or next
music track.
2
3
CD a Change Device
c Select
Tools () Jump Page ' Return
button : Stops a track.
5
24 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Ripping encodes music in the .mp3 format at
192kbps.
4. To remove a file from the playlist, move to the
✎
✎
file, and then press the yELLOW (C) button.
On the Track list screen, you can choose Select
All or deselect All.
5. Press the
button to play the selected files.
v
The playlist screen appears.
Use Select All to select all tracks, and then
-
6. To go to the Music List, press the
or RETURN
5
press the
button. This cancels your
v
button.
individual track selections.
7. To go back to the playlist, press the
button.
v
Use deselect All to deselect all selected tracks
at once.
-
You can create a playlist with up to 99 tracks
on Audio CDs (CD-DA).
✎
✎
If you go to the Music List from the playlist,
and then return to the playlist, the playlist will
start playing again from the beginning.
Playing Photo Contents
You can play photo contents located on a DVD, USB,
mobile device, or PC.
Ripping
Using the Tools Menu
1. Insert a USB device into the USB jack on the
During playback, press the TOOLS button.
front of the product.
2. With the Playback screen displayed, use the
▲▼ buttons to select a track, and then press
the yELLOW (C) button. A check appears to the
left of the track.
Start / Stop Slide Show
Select to play/pause the slide show.
Slide Show Speed
3. Repeat Step 2 to select and check additional
tracks.
Select to adjust the slide show speed.
Background Music
4. To remove a track from the list, move to the
track, and then press the yELLOW (C) button
again. The check on the track is removed.
Select to listen to music while viewing a slide
show.
5. When done, press the TOOLS button.
The Tools menu appears.
Zoom
6. Use the ▲▼ buttons to select Rip, and then
press the
button. The Rip screen appears.
v
Select to enlarge the current picture.
(Enlarge up to 4 times)
7. Use the ▲▼ buttons to select the device to
store the ripped files on, and then press the
button.
v
Rotate
Do not disconnect the device while ripping is
in progress.
✎
Select to rotate a picture. (This will rotate the
picture either clockwise or counter clockwise.)
8. If you want to cancel ripping, press the
v
button, and then select yes. Select No to
Information
continue ripping.
Shows the picture information including the name
and size, etc.
9. When ripping is complete, the "Ripping is
completed." message appears.
10. Press the
button to go back to the Playback
v
screen.
This function is not available for DTS Audio
CDs.
✎
✎
This function may not be supported by some
discs.
25 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Content
Depending on the disc or storage device, the
Tools menu may differ. All options may not be
displayed.
✎
presetting Stations
Example : Presetting FM 89.10 into memory.
1. Press the FUNCTION button to select FM.
To enable the background music function, the
✎
2. Press the TUNING Up, dOWN button to select
photo file must be in the same storage media
as the music file. However, the sound quality
can be affected by the bitrate of the MP3
file, the size of the photo, and the encoding
method.
<89.10>.
3. Press the TUNER MEMORy button.
●
NUMBER flashes on the display.
4. Press the TUNER MEMORy button again.
●
Press the TUNER MEMORy button before
NUMBER disappears from the display on its
own.
Creating a photo playlist
You can create a photo playlist in nearly the same
way you create a music playlist. See page 24 for
instructions. Select photo files instead of music files.
●
After you press the TUNER MEMORy button,
NUMBER disappears from the display and the
station is stored in memory.
Listening to the Radio
5. To preset another station, repeat steps 2 to 4.
●
To tune in to a preset station, press the
TUNING Up, dOWN button.
●
To listen to the radio, you must connect the
supplied FM antenna.
Using Bluetooth
Operating the Radio with the Remote
Control
You can use a Bluetooth device to enjoy music with
high quality stereo sound, all without wires!
1. Press the FUNCTION button to select FM.
What is Bluetooth?
2. Tune to the desired station.
●
preset Tuning 1 : Press the
select pRESET, and then press the TUNING
Up, dOWN button to select a preset station.
button to
5
Bluetooth is a technology that enables Bluetooth-
compliant devices to interconnect with each other
easily using a short, wireless connection.
- Before you can tune to preset stations, you
must add preset stations to the product's
memory.
●
A Bluetooth device may hum or malfunction:
When a part of your body is in contact with the
receiving/transmitting system of the Bluetooth
device or the Home Theater.
-
●
●
Manual Tuning : Press the
button to select
5
MANUAL, and then press the TUNING Up,
dOWN button to tune in to a lower or higher
frequency.
When it is subject to electrical variation from
obstructions caused by a wall, corner, or office
partitioning.
-
Automatic Tuning : Press the
button to
5
When it is exposed to electrical interference
-
select MANUAL, and then press and hold the
TUNING Up, dOWN button to automatically
search the band.
from same frequency-band devices including
medical equipment, microwave ovens, and
wireless LANs.
●
Pair the Home Theater with the Bluetooth device
while the two are close together.
Setting Mono/Stereo
Press the MO/ST button.
●
The further the distance is between the Home
Theater and the Bluetooth device, the worse the
quality is.
If the distance exceeds the Bluetooth operational
range, the connection is lost.
●
Each time you press the button, the sound
switches between STEREO and MONO.
●
In a poor reception area, select MONO for a clear,
interference-free broadcast.
●
In poor reception-sensitivity areas, the Bluetooth
connection may not work properly.
26 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
The AVRCP feature is supported. It's
functionality will differ, depending on the
specifications of the connected device.
●
The Home Theater has an effective reception
range of up to 32.8 feet in all directions if
there are no obstacles. The connection will be
automatically cut off if the device is out of this
range. Even within this range, the sound quality
may be degraded by obstacles such as walls or
doors.
✎
Connect only to a Bluetooth device that
supports the A2DP Profile.
✎
✎
✎
Only one Bluetooth device can be paired at a
time.
●
This wireless device may cause electrical
interference. during its operation.
The search or connection functions may not
work properly in the following cases:
If there a strong electric field near or around
the home theater.
To Connect the Home Theater to a Bluetooth
-
device
If several Bluetooth devices are simultaneously
paired with product.
-
If the Bluetooth device is turned off, not in
place, or malfunctions.
-
Note that such devices as microwave ovens,
-
Connect
wireless LAN adapters, fluorescent lights, and
gas stoves use the same frequency range as
the Bluetooth device, and can cause electric
interference.
For the good compatibility of Bluetooth or any
other devices like Mobile Phone, we recommend
you update the device's lastest version.
✎
Bluetooth device
Before you begin, confirm that the Bluetooth device
supports the Bluetooth compliant stereo headset
function.
To disconnect the Bluetooth device from the
Home Theater
1. Press the FUNCTION button on the remote
You can disconnect the Bluetooth device from
the Home Theater. For instructions, refer to the
Bluetooth device's manual.
control to display the BT message.
2. Select the Bluetooth menu on the Bluetooth
device you want to connect. For instructions,
refer to the Bluetooth device's manual.
●
When the Home Theater is disconnected from the
Bluetooth device, the Home Theater will display
dISCONNECTEd on the front display.
3. Select the Stereo headset menu on the
Bluetooth device.
To disconnect the Home Theater from the
●
You will see a list of devices.
Bluetooth device
4. Select "[HTS]Hxxxxx" from the searched list.
●
When the Home Theater is connected to the
Press the (
) button on the front panel of the
Bluetooth device, the device name of the
connected Bluetooth device, followed by the
name of home theater will appear on the
front display of home theater.
Home Theater to switch from BT to another mode or
turn off the Home Theater.
●
Except when you disconnect the Home Theater
by changing functions, the connected Bluetooth
device will wait a certain time for a response
from the Home Theater before terminating the
connection. (Disconnection time may differ,
depending on the Bluetooth device.)
5. Play music on the connected device.
●
You can listen to the music playing on the
connected Bluetooth device over the Home
Theater system.
In Bluetooth connection mode, the Bluetooth
The Home Theater only supports Middle
Quality SBC data (up to 237kbps@48kHz),
and does not support High Quality SBC data
✎
✎
connection will be lost if the distance between
the Home Theater System and the Bluetooth
device exceeds 32.8 feet. When the Bluetooth
device comes back into effective range or you
restart the Bluetooth device, you have to pair the
device and home theater again to reconnect.
27 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Content
In Bluetooth mode, the screen saver will start
✎
Ğ
Use Tv SOUNd:
if the Bluetooth device stays in the Ready state
for 5 minutes. To reconnect the Bluetooth
device, turn off the screen saver, and then
connect the device. To turn off the screen
saver, press any button on the remote control
(the Volume button, a number button, etc.)
1) When you want to listen to the TV's audio
through the home theater speakers.
2) When you want to listen to the audio from a
USB device plugged into the TV through the
home theater speakers.
Using the Bluetooth power On
When the home theater is turned off, connecting
your smart device to the product via a Bluetooth
connection can turn the home theater on.
Ğ
Tv SOUNd ON/OFF support specifications:
Anynet+
(HdMI-CEC)
Setting
Tv Sound ON
Tv Sound OFF
Quick Start function is available when AC
Power Cord is connected to AC Source.
✎
To use this function, set Settings > System >
Quick Start to On.
To use this function, Bluetooth connection
between the Home theater and your smart
device should have been established before.
In other words, the Home theater should
be found from the list of known Bluetooth
devices of your smart device.
HTS Speaker
Output
HTS Speaker
Mute
✎
ON
✎
TV Speaker
Mute
TV Speaker
Output
HTS Speaker
Output
HTS Speaker
Mute
OFF
1. Connect your smart device to the product
via Bluetooth. (For information on Bluetooth
connections, refer to your smart device’s manual.)
TV Speaker
Output
TV Speaker
Output
HTS Speaker
Output
HTS Speaker
Mute
2. Once connected, the home theater will turn
itself on automatically in BT mode.
No
Operation
●
Select the desired music to play on your smart
TV Speaker
Output
TV Speaker
Output
device.
Using the Special Effects Remote
Control Buttons
DSP/EQ
dSp/EQ
TV SOUND
Tv SOUNd
You can enjoy various sound mode.
z
dSpOFF : Select for normal listening.
If you have a TV that supports Anynet+ (HDMI-
CEC), the Tv SOUNd button lets you direct the
TV's audio to the Home Theater Speakers or the
TV Speakers. To use, follow these steps:
z
CINEMA : Reproduces realistic and powerful
sound for movie sources.
z
z
MUSIC : Suitable for whole music sources.
GAME : Suited for playing video games and
1. Connect an HDMI cable to the TV and home
produces powerful sound.
theater. (See page 11)
z
M-STEREO (Multi Stereo) : Produces surround
2. Set Anynet+ (HdMI-CEC) On in the home
sound for 2 channel input sources.
theater and TV.
z
z
pOWER BASS : Reinforce bass sound effect.
3. Press the Tv SOUNd button on the remote
control. Tv SOUNd ON flashes on the display
on the front panel, and then changes to d. IN.
LOUd : Improves bass sound characteristics
according to output level.
z
NIGHT : Optimizes to night by compress
dynamic range (soft sound).
●
When TV SOUND is on, TV audio outputs
through the Home Theater speakers.
4. Press the Tv SOUNd button again to turn TV
SOUND off.
●
When TV SOUND is off, TV audio outputs through
the speakers of the connected Anynet+ TV.
28 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
6. Use the ▲▼◀▶ button to select the folder
Using BD-LIVE™
with the kind of files you selected, and then
press
. The File List is displayed.
v
1. Connect the product to the network.
7. Select the file you want to view or play, and
then press
.
v
2. Configure the network settings.
You can create Playlists from files on your PC
in the same way you create playlists from files
on USB devices and discs.
✎
Once the product is connected to your network, you
can enjoy various movie-related service contents
available on BD-LIVE compliant discs.
With a few exceptions, you can control the
playback of files on your PC in the same
fashion you control the playback of files on
USB devices and discs.
✎
1. Attach a USB memory stick to the USB jack on
the front of the product, and then use Bd data
Management to check its remaining memory.
The memory device must have at least 1GB
of free space to accommodate the BD-LIVE
services.
You can also access files on your PC by first
selecting photos, videos, or Music on the
Home screen, and then selecting your PC from
the device list that appears.
✎
2. Select Settings on the Home screen, and then
Apps
press the
button.
v
3. Select System, and then press the
button.
v
Your home theater offers an extensive collection
of news, movies, weather, and other content you
can download directly to and enjoy on your home
theater. First, check the network and make sure the
home theater is connected to the Internet. Your
home theater must be connected to the Internet to
use the Apps feature.
4. Select Bd data Management, and then press
the button.
v
5. Select Change device, and then press the
v
button.
6. Select USB dISk, and then press the
button.
v
7. Insert a Blu-ray Disc that supports BD-LIVE.
The apps offered through the Apps feature work
much like their on-line versions or, if different, are
easy to use.
8. Select an item from the list of BD-LIVE service
contents provided by the disc manufacturer.
The apps require you to create accounts before you
can use them. Although you can create an account at
most of these sites through your home theater, it is
easier and quicker to create an account by visiting the
sites on line using a PC, laptop, or tablet with Internet
access. Note that in some cases, you will need to
use the home theater and a PC, laptop, or tablet to
establish an account. The main difference between
the regular on-line versions and the versions you can
access through your home theater is that with the
home theater versions, you use your remote to enter
letters and numbers as opposed to a keyboard.
The way you use BD-LIVE and the provided
contents may differ, depending on the disc
manufacturer.
✎
Using DLNA
DLNA lets you access and play files located on your
PC through your home theater.
Follow the directions in the DLNA user's guide to set
up DLNA on your PC and to tag folders and files you
want to share with the home theater.
To access and play files located on your PC after you
have setup DLNA, follow these steps:
Using Apps
The first time you access any one of the apps, the home
theater displays two agreements. You must accept both
agreements to download and use any apps.
1. Turn on your PC, your TV, and the home
theater.
2. Make sure the DLNA Shared server is running
on your PC.
By default, the home theater displays four popular
apps on the Home screen. You can view more apps
and change the apps the home theater displays on the
Home screen by selecting the More button.
3. On your home theater, select Change device.
4. Use the ▲▼ button to select your PC in the
Device List.
To start an app, highlight the app, double click it, and
then follow the directions displayed on the screen.
5. Select the kind of file you want to view or play,
photos, videos, or Music and then press
.
v
29 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
viewing Additional Apps
Selecting an App
1. Select the More button on the Home screen,
Move the highlight to the app you want, and then
and then press the
button. The More Apps
v
press the
button.
v
screen appears displaying a bank of apps.
In the pop-up that appears, select OpEN to open the
app immediately or Add TO My AppS to add the
app to My Apps. Press the RETURN button on your
remote to go back to the Opera Tv Store screen.
2. To view additional apps, move the highlight
to the right or left until another group of apps
appears.
3. To exit the More Apps screen, select Close or
press the RETURN button or ExIT button on
your remote.
Selecting Apps by Category
To make searching for apps easier, you can view apps
by categories such as popular, Watch, Listen, play, etc.
Changing the Apps displayed on the Home Screen
To select a category, use the ▲ button on your remote
to move the highlight to the top of the screen.
1. Select the More button, and then press the
v
Then, use the◀▶ buttons to select a category.
button.
2. Select the Edit button on the More Apps screen,
and then press the button.
Using the My Apps Screen
v
To access the My Apps screen, highlight My AppS,
3. Apps that the home theater displays on the
Home page are marked with a check. Deselect
apps you want to remove from the Home
screen by highlighting each app, and then
and then press the
button. The My Apps screen
v
appears displaying all the apps you have saved with
the My Apps designation.
pressing the
button.
v
deleting Apps from My Apps
4. Select apps by highlighting each app, and then
pressing the button. A check mark appears
1. Highlight the MENU button on the top of the
v
My Apps screen, and then press the
on your remote.
button
v
on each app you select. You can have up to
four apps selected at a time.
2. Select REMOvE AppS in the menu, and then
press the button. A red rectangle appears
5. When done, select Ok, and then press the
v
v
button. The Home screen re-appears.
around one of the apps.
To exit an application, press the ExIT button
on your remote.
✎
✎
3. Move the rectangle to the app you want to
delete, and then press the
button.
v
To delete the login information for all Apps,
4. Repeat this process to delete additional apps.
press the
button for 5 seconds or more.
5
5. When finished, select dONE, and then press
the
button.
v
Using Opera TV Store
6. Press the RETURN button to go back to the
At the Opera Tv Store, you will find high-quality
Internet video streaming, social network, and music
streaming services.
Main screen.
Searching for Apps
1. Select SEARCH at the top of the screen, and
Accessing Opera Tv Store
To access Opera Tv Store, select the Opera Tv Store
button on the Home screen, and then press the
button.
then press the
button.
v
2. To search quickly for popular items, click one of
v
the popular search tabs at the top of the screen.
3. To search for an app by name, enter the app
name using the onscreen keyboard. Opera Tv
Store will search as you type and display apps
with names that match the letters you enter.
To exit the Opera Tv Store screen, press the ExIT or
RETURN button on your remote.
Navigating in Opera Tv Store
●
To cancel a current search, press the RETURN
When the Opera Tv Store screen appears, it
displays a bank of assorted apps. Use the ▲▼◀▶
buttons on your remote to move the highlight
from app to app.
button on your remote or select BACk on the
screen, and then press
.
v
30 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
digital Output
Additional Information
●
Be sure to select the correct digital Output or you
will hear no sound or just loud noise.
Notes
●
If the HDMI device (AV receiver, TV) is not
compatible with compressed formats (Dolby
Digital, DTS), the audio signal outputs as PCM.
Connections
HdMI OUT
●
Regular DVDs do not have BONUSVIEW audio and
Navigation Sound Effects.
●
Certain HDMI output resolutions may not work,
depending on your TV.
●
Some Blu-ray Discs do not have BONUSVIEW audio
and Navigation Sound Effects.
●
You must have an HDMI connection to enjoy
videos with 3D technology.
●
This digital Output setup does not affect the
analog (L/R) audio or HDMI audio output to your
TV.
It affects the optical and HDMI audio output when
your product is connected to an AV receiver.
●
A long HDMI cable may cause screen noise. If this
occurs, set HdMI deep Color to Off in the menu.
Settings
●
If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of your digital
Output selections (PCM or Bitstream).
3d Settings
●
For some 3D discs, to stop a movie during 3D
●
digital Output can be activated when Speaker
playback, press the
button once. The movie
Selection is set to Tv Speaker.
5
stops and the 3D mode option is de-activated.
To change a 3D option selection when you are
Bd-Live Internet Connection
playing a 3D movie, press the
Blu-ray menu appears. Press the
then select 3d Settings in the Blu-ray menu.
button once. The
5
●
The Internet connection may be restricted while
you are using BD-LIVE contents.
button again,
5
●
Depending on the content and the position of the
picture on your TV screen, you may see vertical
black bars on the left side, right side, or both sides.
Anynet+ (HdMI-CEC)
●
Depending on your TV, certain HDMI output
resolutions may not work. Please refer to the user
manual of your TV.
Tv Aspect Ratio
●
This function is not available if the HDMI cable
does not support CEC.
●
Depending on the disc type, some aspect ratios
may not be available.
●
If your Samsung TV has an Anynet+ logo, then it
supports the Anynet+ function.
●
If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen,
the picture might appear to be distorted.
Bd data Management
●
If you select 16:9 Original, your TV may display 4:3
pillarbox (black bars on the sides of the picture).
●
In the external memory mode, disc playback may
be stopped if you disconnect the USB device in the
middle of playback.
Bd Wise (Samsung products only)
●
Only those USB devices formatted in the FAT file
●
When Bd Wise is on, the Resolution setting
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that support
the USB 2.0 protocol with 4 MB/sec or faster
read/write speeds.
●
If the product is connected to a device that does
not support Bd Wise, you cannot use the Bd Wise
function.
●
The Resume Play function may not work after you
format the storage device.
●
For proper operation of Bd Wise, set the Bd Wise
option in both the product and the TV to On.
●
The total memory available to Bd data
Management may differ, depending on conditions.
Speaker Settings
●
When Speaker Selection is set to Tv Speaker, audio
is produced by the TV speakers.
31 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
HdMI audio
playing Content
●
When HDMI audio is output to the TV speakers, it
Using the TOOLS button while playing pictures
is automatically down-mixed to 2 channels.
●
If the home theater is connected to a BD Wise
Audio Return Channel
compliant TV that has Bd Wise On, the picture
Settings menu will not appear.
●
When Anynet+ (HdMI-CEC) is Off, the Audio
Return Channel function is not available.
●
The Background Music function will not work
unless the music file and the photo file are located
on the same storage media. Also, sound quality
can be impacted by the bitrate of the MP3 music
file, the size of the photos, and the encoding
method.
●
Using an HDMI cable not certified for ARC (Audio
Return Channel) may cause a compatibility
problem.
●
The ARC function is only available if an ARC-
compliant TV is connected.
playback
Disk and Format Compatibility
playing video files
disc types and content your product can
●
Video files with high bitrates of 20Mbps or more
play
strain the product’s capabilities and may stop
playing during playback.
Media
disc Type
details
Selecting the Audio Language
BD-ROM or BD-RE/-R disc
recorded in the BD-RE
format.
●
The ◀▶ indicator will not appear on the screen
if the BONUSVIEW section does not contain any
BONUSVIEW audio settings.
Blu-ray Disc
3D Blu-ray Disc
●
The languages available through the Audio
DVD-VIDEO, recorded
DVD-VIDEO, DVD+RW/DVD-RW(V)/
Language function depend on the languages that
are encoded on the disc. This function or certain
languages may not be available.
VIDEO
DVD-RW,
DVD-R,
DVD+RW,
DVD+R
DVD-R/+R discs that
have been recorded and
finalized, or a USB storage
media containing MKV,
MP4 contents.
●
Some Blu-ray Discs may allow you to select either
the PCM or Dolby Digital audio English soundtrack.
Selecting the Subtitle Language
Music recorded on CD-
RW/-R, DVD-RW/-R, BD-
DVD-RW/-R, RE/-R discs or a USB
●
Depending on the Blu-ray Disc / DVD, you may be
able to change the subtitle language in the Disc
Menu. Press the dISC MENU button.
CD-RW/-R,
MUSIC
PHOTO
BD-RE/-R
storage media containing
MP3 or WMA contents.
●
This function depends on the selection of subtitles
that are encoded on the disc and may not be
available on all Blu-ray Discs/DVDs.
Photos recorded on CD-
RW/-R, DVD-RW/-R, BD-
DVD-RW/-R, RE/-R discs or a USB
CD-RW/-R,
●
Information about the main feature BONUSVIEW
mode will also appear if the Blu-ray Disc has a
BONUSVIEW section.
BD-RE/-R
storage media containing
JPEG contents.
●
This function changes both the primary and
secondary subtitles at the same time.
The product may not play certain CD-RW/-R and
DVD-R because of the disc type or recording
conditions.
✎
✎
●
The total number of primary and secondary
subtitles, respectively, is displayed.
If a DVD-RW/-R disc has not been recorded
properly in DVD video format, it will not be
playable.
playing JpEG files
●
You can’t enlarge the subtitle and PG graphics in
the full screen mode.
32 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Your product will not play content that has been
recorded on a DVD-R at a bitrate that exceeds 10
Mbps.
✎
✎
✎
Logos of discs the product can play
Your product will not play content that has been
recorded on a BD-R or USB device at a bitrate that
exceeds 30 Mbps.
Playback may not work for some types of discs, or
Blu-ray Disc
3D Blu-ray Disc
when you use specific operations, such as angle
change and aspect ratio adjustment. Information
about the discs is written in detail on the disc box.
Please refer to this if necessary.
When you play a BD-J title, loading may take
longer than a normal title or some functions may
perform slowly.
✎
BD-LIVE
Dolby
disc Types your product cannot play
●
●
●
●
HD DVD
DVD-RAM
DVD-ROM/PD/MV-Disc,
etc
Super Audio CD
(except CD layer)
DTS
Java
●
●
●
DVD-RW(VR mode)
3.9 GB DVD-R Disc for
Authoring.
CVD/CD-ROM/CDV/CD-
G/CD-I/LD
(CD-Gs play audio only,
not graphics.)
NTSC broadcast system in
U.S.A, Canada, Korea, Japan
This product may not respond to all operating
✎
✎
✎
✎
commands because some Blu-ray Disc, DVD, and
CD discs allow specific or limited operation and
provide only certain features during playback.
Please note that this is not a defect in the
product.
Region Code
Both products and discs are coded by region. These
regional codes must match for a disc to play. If the codes
do not match, the disc will not play.
The Region Number for this product is displayed on the
rear panel of the product.
Samsung cannot guarantee that this product
will play every disc bearing the Blu-ray Disc,
DVD, or CD logo because disc formats evolve,
and problems and errors may occur during the
creation of Blu-ray Disc, DVD, and CD software
and/or the manufacture of discs.
Region
Code
disc Type
Area
Please contact the SAMSUNG Customer Care
Center at 1-800-726-7864 if you have questions
or encounter difficulty when playing Blu-ray Discs,
DVD, or CD discs in this product. Also, refer to the
rest of this user manual for additional information
on playback restrictions.
North America, Central
America, South America, Korea,
Japan, Taiwan, Hong Kong and
South East Asia.
A
Some commercial discs and DVD discs purchased
outside your region may not play on this product.
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
Blu-ray
disc
B
India, China, Russia, Central
and South Asia.
C
33 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Some AVCHD format discs may not play,
depending on the recording conditions.
AVCHD format discs need to be finalized.
✎
The U.S., U.S. territories and
1
2
3
Canada
✎
✎
“x.v.Color” offers a wider color range than normal
DVD camcorder discs.
Europe, Japan, the Middle East,
Egypt, Africa, Greenland
Some MKV and MP4 format discs may not play,
depending on their video resolution and frame
rate.
✎
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
Supported Formats
dvd-
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
vIdEO
Notes on the USB connection
●
Your product supports USB storage media, MP3
4
players, digital cameras, and USB card readers.
●
The product does not support folder or file names
longer than 128 characters.
Russia, Eastern Europe, India,
North Korea, Mongolia
●
Some USB/digital camera devices may not be
compatible with the product.
5
6
●
Your product supports the FAT 16, FAT 32, and NTFS
file systems.
China
●
Connect USB devices directly to the product’s USB
port. Connecting through a USB cable may cause
compatibility problems.
If the Region number of a Blu-ray Disc/DVD
does not correspond to the Region number of
this product, the product cannot play the disc.
●
Inserting more than one memory device into a
multi-card reader may cause the reader to operate
improperly.
✎
●
●
●
●
The product does not support the PTP (Peer to Peer)
protocol.
AvCHd (Advanced video Codec High
definition)
Do not disconnect a USB device while it is transferring
or recording data.
●
This product can play back AVCHD format discs. These
The bigger the image resolution, the longer the image
takes to display.
discs are normally recorded and used in camcorders.
●
The AVCHD format is a high definition digital video
This product cannot play MP3 files with DRM (Digital
Rights Management) downloaded from commercial
sites.
camera format.
●
The MPEG-4 AVC/H.264 format compresses images
with greater efficiency than the conventional image
compressing format.
●
●
Your product only supports video that is under 30fps
(frames per second).
●
Some AVCHD discs use the “x.v.Color” format. This
Your product only supports USB Mass Storage Class
(MSC) devices such as thumb drives and USB HDD.
(HUB is not supported.)
product can play back AVCHD discs that use the
“x.v.Color” format.
●
“x.v.Color” is a trademark of Sony Corporation.
●
Certain USB HDD Devices, multi-card readers and
thumb drives may not be compatible with this
product.
●
“AVCHD” and the AVCHD logo are trademarks of
Matsushita Electronic Industrial Co., Ltd. and Sony
Corporation.
●
●
If some USB devices require excessive power, they may
be limited by the circuit safety device.
If playback from a USB HDD is unstable, provide
additional power by plugging the HDD into a wall
socket. If the problem continues, contact the USB
HDD manufacturer.
●
SAMSUNG is not responsible for any data file damage
or data loss.
34 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
video File Support
File Extension
*.avi
Container
video Codec
Audio Codec
Resolution
MP3, Dolby Digital, DTS,
WMA, PCM
MP4v3
AVI
H.264 BP/MP/HP
VC-1 AP
*.mkv
*.wmv
*.mp4
MP3, Dolby Digital, DTS
MKV
H.264 BP/MP/HP
VC-1 AP
VC-1 SM
WMV
(wmv9)
WMA
AAC
1920x1080
MP4 (mp4v)
MP4
PS
H.264 BP/MP/HP
MPEG1
MPEG2
MP1, 2
*.mpg /
*.mpeg
Dolby Digital, DTS
H.264 BP/MP/HP
Limitations
`
Even when a file is encoded by a supported codec listed above, the file might not play if its content has a problem.
Normal playback is not guaranteed if the file’s container information is wrong or the file itself is corrupted.
Files having a higher bitrate/frame rate than standard may stutter during sound/video playback.
The Seek (skip) function is not available if the file’s index table is damaged.
-
-
-
-
video decoder
`
Supports up to H.264 Level 4.1 and AVCHD
-
-
-
Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4
MPEG4 SP, ASP :
Below 1280 x 720 : 60 frames max
Above 1280 x 720 : 30 frames max
Does not support GMC 2 or higher
-
Audio decoder
`
Supports WMA 7, 8, 9, and STD
-
-
-
Does not support WMA sampling rate of 22050Hz mono.
AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96) Max bitrate: 320kbps
Music File Support
File Extension
Container
Audio Codec
Support Range
*.mp3
MP3
-
MP3
* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48
* Bitrates - All bitrates from 5kbps to 384kbps
*.wma
WMA
WMA
picture File Support
File Extension
Type
Resolution
*.jpg / *.jpeg / *.jpe
*.png
JPEG
PNG
15360x8640
35 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
digital Output Selections
Bitstream
(Re-encoded
dolby d)
Bitstream
(Unprocessed)
Bitstream
(Re-encoded dTS)
Setup
pCM
Connection
PCM
HdMI supported Av receiver
Up to PCM 7.1ch
PCM
Dolby Digital
Dolby Digital
Dolby Digital
Plus
Dolby Digital Plus
Dolby TrueHD
Audio
Stream on
Blu-ray Disc
Dolby TrueHD
DTS
Re-encoded
Dolby Digital *
DTS re-encoded
DTS
Up to PCM 5.1ch
DTS-HD High
Resolution
Audio
DTS-HD High
Resolution Audio
DTS-HD Master
Audio
DTS-HD Master
Audio
PCM
Dolby Digital
DTS
PCM 2ch
Audio
Stream on
DVD
Dolby Digital
DTS
Up to PCM 5.1ch
Decodes the
main feature
audio and
BONUSVIEW
audio stream
together into
Outputs only the
main feature audio
stream so that your BONUSVIEW audio
AV receiver can
decode the audio
bitstream.
You will not hear
BONUSVIEW audio
or Navigation
Decodes the main
feature audio and
Decodes the main
feature audio and
BONUSVIEW audio
stream together
into PCM audio and
adds Navigation
Sound Effects.
stream together
Definition
for Blu-ray
Disc
into PCM audio and PCM audio and
Any
adds Navigation
Sound Effects, then
re-encodes the
adds Navigation
Sound Effects,
then re-encodes
PCM audio into DTS the PCM audio
Sound Effects.
bitstream.
into Dolby
Digital bitstream
or PCM.
■
If the Source Stream is 2ch or mono, “Re-encoded Dolby D” Setting are not applied. Output will be PCM 2ch.
Blu-ray Discs may include three audio streams :
Main Feature Audio : The audio soundtrack of the main feature.
-
BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.
-
Navigation Sound Effects : When you choose some menu navigation options, Navigation Sound Effects may sound.
Navigation Sound Effects are different on each Blu-ray Disc.
-
36 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Resolution according to the output mode
Blu-ray disc/E-contents/digital Contents playback
HdMI Mode
dvd playback
Output
HdMI Mode
E-contents/
Setup
Blu-ray disc
digital contents
Resolution of Blu-ray
Disc
BD Wise
1080p@60F
480i
Auto
1080p@60F
1080p
Max. Resolution of TV input
Max. Resolution of TV input
1080p@60F
-
-
1080p
-
Movie Frame : Auto (24Fs)
1080p@24F
1080i
1080i
720p
480p
1080i
720p
480p
720p
480p
Troubleshooting
Refer to the table below when this product does not function properly. If the problem you are experiencing is not
listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact
Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864).
Symptom
Check/Remedy
●
●
you cannot eject the disc.
Is the power cord plugged securely into the outlet?
Turn off the power, and then turn it back on.
●
playback does not start.
Check the region number of the Blu-ray/DVD disc.
Blu-ray/DVD disc purchased from abroad may not be playable.
●
●
CD-ROMs and DVD-ROMs cannot be played on this product.
Make sure that the rating level is correct.
●
●
playback does not start
immediately when you press
Are you using a deformed disc or a disc with scratches on the surface?
Wipe the disc clean.
the
/
button.
6 7
●
No sound.
The home theater does not play sound during fast playback, slow playback, and
step motion playback.
●
●
Are the speakers connected properly? Is the speaker setup correctly customized?
Is the disc severely damaged?
●
●
●
●
you can only hear sound
from a few speakers, but not
all 6.
On certain Blu-ray/DVD discs, sound is output from the front speakers only.
Check if the speakers are connected properly.
Adjust the volume.
When playing audio from a CD, the radio, or a TV, the unit outputs sound to the
front speakers only.
37 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Symptom
Check/Remedy
●
●
dolby digital 5.1 CH
Surround Sound is not
produced.
Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround
Sound is produced only if the disc is recorded with 5.1 channel sound.
Is the audio language correctly set to Dolby Digital 5.1-CH in the information
display?
●
The remote control does not
work.
Are you operating the remote within its operational range and within the proper
angle relative to the sensor?
●
●
Are the batteries drained?
Have you selected the mode (TV/BD) functions of the remote control (TV or BD)
correctly?
●
●
●
●
●
The disc is rotating but
there is no picture.
Is the TV power on?
Are the video cables connected properly?
Is the disc dirty or damaged?
●
picture quality is poor and
the picture is shaking.
A poorly manufactured disc may not be playable.
●
●
Audio language and subtitles
do not work.
The Audio Language and subtitle functions will not work if the disc does not
contain multiple language sound tracks or subtitles.
The menu screen does not
appear even when you select
the menu function.
Are you using a disc that does not contain menus?
●
●
The aspect ratio cannot be
changed.
You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode,
or 4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 mode only.
Refer to the Blu-ray Disc jacket, and then select the appropriate function.
●
The product is not
Press and hold the remote control's
This will reset the unit.
button for 5 seconds in STANDBY mode.
5
working.
(Example: The power goes
off or you hear a strange
noise.)
Using the RESET function will erase all stored settings.
Do not use this function unless necessary.
-
●
The product is not
working normally.
●
you have forgotten the
With no disc in the product, press and hold the product's
button for longer
5
rating level password.
than 5 seconds. INIT appears on the display and all settings will their default
values.
Using the RESET function will erase all stored settings.
Do not use this function unless necessary.
-
●
●
Can't receive radio
broadcasts.
Is the antenna connected properly?
If the antenna's input signal is weak, install an external FM antenna in an area
with good reception.
●
●
There is no sound when
you try to listen to Tv audio
through the home theater
speakers.
If you press the button while listening to TV audio using the d. IN or AUx
functions, the Blu-ray/DVD disc functions are turned on and the TV audio is
muted.
^
"Not Available" appears on
screen.
The features or action cannot be completed at this time because:
1. The Blu-ray/DVD disc's software restricts it.
2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
38 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Check/Remedy
●
If the HdMI output is set to
a resolution your Tv cannot
support (for example,
Press and hold the
disc in the product. All settings will revert to their factory settings.
button on front panel for more than 5 seconds with no
5
1080p), you may not see a
picture on your Tv.
●
●
No HdMI output.
Check the connection between the TV and the HDMI jack of the product.
Check if your TV supports 480p/720p/1080i/1080p HDMI input resolution.
●
Abnormal HdMI output
appears on the screen.
If random noise appears on the screen, it means that TV does not support HDCP
(High-bandwidth Digital Content Protection).
dLNA function
●
you can see folders shared
through dLNA, but cannot
see the files.
DLNA shows only Photo, Music, and Movie files. It does not display other kinds
of files.
●
●
video plays intermittently.
Check if the network is stable.
Check if the network cable is properly connected and if the network is
overloaded.
●
●
The dLNA connection
between the Tv and pC is
unstable.
IP addresses under the same subnetwork should be unique, otherwise IP collision
can cause an unstable connection.
Check if you have a firewall enabled.
If so, disable the firewall function.
Bd-LIvE
●
The home theater cannot
connect to the Bd-LIvE
server.
Test whether the network connection is active by using the Network Status
function.
●
●
Check whether a USB memory device is connected to the product.
The memory device must have at least 1GB of free space to accommodate the
BD-LIVE service.
●
●
See if the Bd-Live Internet Connection option is set to Allow(All).
If all above fails, contact the contents provider or update to the latest firmware.
●
When using the Bd-LIvE
service, an error occurs.
The USB memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
When the factory default settings are restored, all stored user BD data is deleted.
✎
Repairs
If you contact us to repair your product, an administration fee may be charged if either:
1. An engineer is called out to your home at your request and there is no defect in the product.
2. You bring the unit to a repair center and there is no defect in the product.
We will provide you with the amount of the administration fee before we make a home visit or begin any work on
your product.
com, or contact Samsung Customer Care at 1-800-SAMSUNG (726-7864) before seeking to repair your product.
39 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Specifications
Power Requirements
AC 110-120V ~ 50/60Hz
Power Consumption
Weight
39 W
4.19 Ibs
General
Dimensions
16.9 (W) x 2.1 (H) x 8.8 (D) inches
Operating Temperature Range
Operating Humidity Range
Signal/noise ratio
+41°F to +95°F
10 % to 75 %
55 dB
FM Tuner Usable sensitivity
Total harmonic distortion
12 dB
1.0 %
Video
1080p, 1080i, 720p, 480p
HDMI
Audio
PCM multichannel audio, Bitstream audio, PCM audio
Front speaker output
Center speaker output
Surround speaker output
Subwoofer speaker output
80W x 2 (3Ω)
80W (3Ω)
80W x 2 (3Ω)
100W (3Ω)
Amplifier
Analog input : 20Hz~20kHz (±3dB)
Digital input : 20Hz~40kHz (±4dB)
70dB
Frequency response
S/N Ratio
Channel separation
Input sensitivity
60dB
(AUX) 500mV
Speaker (5.1ch speaker system)
Speaker
system
Dimensions
Output sound Rated Maximum
Weights
(Ibs)
Impedance
3 Ω
Frequency range
pressure level input
input
160W
200W
(W x H x D) (inches)
Front
Surround
Center
200Hz ~ 20kHz
50Hz ~ 200Hz
80W
3.7 x 4.6 x 2.9
0.66
6.37
84dB/W/M
Subwoofer
100W
6.1 x 11.8 x 11.2
Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
Weight and dimensions are approximate.
✎
✎
✎
✎
Design and specifications are subject to change without prior notice.
Dispose of unwanted electronics through an approved recycler.
278 - 0799
40 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
Licenses
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
DTS Licensing Limited. DTS, DTSHD, the Symbol, & DTS and the Symbol together
are registered trademarks, and DTS-HD Master Audio | Essential is a trademark of
DTS, Inc. © DTS, Inc. All Rights Reserved.
DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service marks, or
certification marks of the Digital Living Network Alliance.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks
of their respective owners.
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property
rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
Blu-ray Disc™, Blu-ray™, and the logos are trademarks of Blu-ray Disc Association.
This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film
and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be
displayed and playback or copying will be interrupted.
More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at
http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing
address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA."
This product incorporates proprietary technology under license from Verance Corporation and is protected by U.S.
Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret
protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-
2010 Verance Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited.
- Open Source License Notice
In the case of using open source software, Open Source Licenses are available on the product menu.
41 - English
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton
to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and
workmanship for a limited warranty period of:
One (1) year parts and Labor*
(*90 days parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in
the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and
service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original
dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized
service center. Transportation of the product to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or
reconditioned parts or products if found to be defective during the limited warranty period specified above. All
replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement
parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand
name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if
provided, are on an “AS IS” basis.
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except
to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not
apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation;
applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage
or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment,
systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors
not supplied and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect
electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions,
cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book;
product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other signal
transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO
WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY
PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR
CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE
LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS
PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG
BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE
ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR
LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY
ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY
BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental
or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights which vary from state to state.
To obtain warranty service, please contact SAMSUNG customer care center.
The benefits of this Limited Warranty extend only to the original purchaser of Samsung products from an authorized
Samsung reseller. THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS PURCHASED
FROM UNAUTHORIZED RESELLERS OR RETAILERS, EXCEPT IN STATES WHERE SUCH RESTRICTION MAY BE
PROHIBITED. For a list of Samsung authorized retailers, please go to: http://www.samsung.com/us/peaceofmind/
authorized_resellers.html.
Download from Www.Somanuals.com. All Manuals Search And Download.
QUESTIONS OR COMMENTS?
COUNTRy
CALL
OR vISIT US ONLINE AT
WRITE
Samsung Electronics America, Inc. 85
Challenger Road Ridgefield Park, NJ
07660
(726-7864) support
IN THE US
© 2014 Samsung Electronics Co., Ltd. All rights reserved.
AH68-02672A-00
Download from Www.Somanuals.com. All Manuals Search And Download.
|