HT-D450
HT-D453
HT-D455
Digital Home
Entertainment System
user manual
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd
1
2011-03-05 �� 11:37:29
Precautions
~
~
~
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your product.
Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10cm).
Do not place the product on amplifiers or other equipment which may become hot.
Make sure the ventilation slots are not covered.
~
~
~
Do not stack anything on top of the product.
Before moving the product, ensure the Disc Insert Hole is empty.
In order to disconnect the product completely from the power supply, remove the AC plug from the wall outlet, especially when left
unused for a long period of time.
~
~
~
During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the
product.
Do not expose the product to direct sunlight or other heat sources. This could lead to overheating and malfunction of the
product.
Protect the product from moisture, and excess heat or equipment creating strong magnetic or electric fields (i.e.
speakers.).
~
~
~
Disconnect the power cable from the AC supply if the product malfunctions.
Your product is not intended for industrial use. Use of this product is for personal use only.
Condensation may occur if your product or disc has been stored in cold temperatures. If transporting the product during
the winter, wait approximately 2 hours until the product has reached room temperature before using.
~
The batteries used with this product contain chemicals that are harmful to the environment.
Do not dispose of batteries in the general household trash.
Accessories
Check for the supplied accessories below.
FUNCTION
TV SOURCE
POWER
RECEIVER
SLEEP
DVD
TV
1
4
7
2
5
8
0
3
6
9
D
S
P
/
E
Q
MUTE
TUNING
/CH
VOL
DISC MENU
TOOLS
REPEA
T
MENU
T
I
T
L
E
M
E
N
U
INFO
RETURN
EXIT
D
A
B
C
AUDIO
DIMMER
GIGA
S.VOL
UPSCALE
P.BASS
TUNER
S
/
W
L
E
V
E
L
MEMOR
Y
MO/ST
U
S
B
R
E
C
Remote Control/Batteries
(AAA size)
Scart Adapter
(Europe only)
Video Cable
FM Antenna
User manual
English
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd
3
2011-03-05 �� 11:37:30
Safety Information
Cautions on Handling and Storing Discs
Licence
Small scratches on the disc may reduce sound and
picture quality or cause skipping.
Be especially careful not to scratch discs when
handling them.
~
ABOUT DIVX VIDEO: DivX® is a digital video format
created by DivX, Inc. This is an official DivX Certified®
device that plays DivX video. Visit www.divx.com for more information and
software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete
your registration.
Holding discs
~
~
Do not touch the playback side of the disc.
Hold the disc by the edges so that
fingerprints will not get on the surface.
DivX Certified® to play DivX® video, including premium content
DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc.
and are used under license.
~
Do not stick paper or tape on the disc.
Covered by one or more of the following U.S. patents : 7,295,673;
7,460,668; 7,515,710; 7,519,274
Disc Storage
~
~
~
Do not keep in direct sunlight
Keep in a cool ventilated area
Keep in a clean Protection jacket.
Store vertically.
~
~
HDMI, the HDMI Logo, and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
This item incorporates copy protection technology that is protected by U.
S. patents and other intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are prohibited.
✎
`
NOTE
~
Dolby and the double-D symbol are registered trademarks of Dolby
Laboratories.
Do not allow the discs to become contaminated with dirt.
`
Do not load cracked or scratched discs.
Copyright
Handling and Storing Discs
If you get fingerprints or dirt on the disc, clean it with a
mild detergent diluted in water and wipe with a soft cloth.
© 2011 Samsung Electronics Co., Ltd. All rights
reserved.
~
When cleaning, wipe gently from the inside to the
outside of the disc
Copy Protection
~
Many DVD discs are encoded with copy protection.
Because of this, you should only connect your product
directly to your TV, not to a VCR. Connecting to a VCR
results in a distorted picture from copy-protected DVD
discs.
✎
`
NOTE
Condensation may form if warm air comes into contact
with cold parts inside the product. When condensation
forms inside the product, it may not operate correctly. If
this occurs, remove the disc and let the product stand
for 1 or 2 hours with the power on.
ꢂ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd
4
2011-03-05 �� 11:37:30
Contents
2
3
3
4
4
4
4
Safety Warnings
Precautions
SAfETy INfORMATION
Accessories
Cautions on Handling and Storing Discs
Licence
Copyright
Copy Protection
2
7
7
Icons that will be used in manual
Disc Types and Characteristics
GETTING STARTED
11 Description
11
12
Front Panel
Rear Panel
7
13 Remote control
15 Connecting the Speakers
CONNECTIONS
18 Connecting the Video Out to your TV
20 Connecting the FM Antenna
21
Connecting Audio from External Components
15
22 Before Starting (Initial Settings)
22 Setting the Setup menu
23 Display
SETUP
23
23
23
23
23
TV Aspect
BD Wise
22
Resolution
HDMI Format
Video Out Signal
24 Audio
24
25
25
25
26
26
Speaker Setting
DRC (Dynamic Range Compression)
AUDIO SYNC
HDMI AUDIO
User EQ
Audio Return Ch.
26 System
26
26
26
Initial Settings
DivX(R) Registration
DivX(R) Deactivation
27 Language
27 Security
27
27
Parental Rating
Change Password
27 Support
27
Product Information
English
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd
5
2011-03-05 �� 11:37:30
Contents
28 Disc Playback
BASIC fUNCTIONS
28 Audio CD(CD-DA)/MP3/WMA Playback
29 JPEG File Playback
29 Using the Playback Function
33 Sound Mode
35 Listening to Radio
28
36 USB Function
36 USB Recording
ADvANCED fUNCTIONS
36
37 Troubleshooting
38 Language code list
39 Specifications
OTHER INfORMATION
37
•
•
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance.
An administration fee may be charged if either
a. an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual)
b. you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
•
The amount of such administration charge will be advised to you before any work or home visit is carried out.
ꢄ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd
6
2011-03-05 �� 11:37:30
Getting Started
Icons that will be used in manual
Disc Types and Characteristics
Make sure to check the following terms before
reading the user manual.
Region Code
Icon
Term
Definition
The product and the discs are coded by region. These
regional codes must match in order for the disc to play. If the
codes do not match, the disc will not play.
This involves a function
available with DVD-Video or
DVD±R/±RW discs that
have been recorded and
finalised in Video Mode.
DVD
d
Region
Disc Type
Area
Code
This involves a function
available with a data CD
(CD DA, CD-R/-RW).
The U.S., U.S. territories and
Canada
CD
MP3
1
B
A
G
D
!
Europe, Japan, the Middle East,
Egypt, South Africa, Greenland
This involves a function
available with CD-R/-RW
discs.
2
3
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
This involves a function
available with CD-R/-RW
discs.
JPEG
DivX
DVD-VIDEO
Mexico, South America, Central
America, Australia, New Zealand,
Pacific Islands, Caribbean
4
This involves a function
available with MPEG4 discs.
(DVD±R/±RW, CD-R/-RW)
Russia, Eastern Europe, India,
most of Africa, North Korea,
Mongolia
5
6
This involves a case where a
function does not operate or
settings may be cancelled.
CAUTION
NOTE
China
This involves tips or instructions
on the page that help each
function operate.
✎
This function provides direct and
easy access pressing the button
on the remote control.
Shortcut
Key
English
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd
7
2011-03-05 �� 11:37:31
Getting Started
Disc types that can be played
CD-R MP3 Discs
~
~
~
~
~
Only CD-R discs with MP3 files in ISO 9660 or
Joliet format can be played.
Disc Types & Recorded Disc
Max. Playing Time
Mark (Logo)
Signals
Size
MP3 file names should contain no blank spaces
or special characters (. / = +).
Use discs recorded with a compression/
decompression data rate greater than 128Kbps.
Only files with the ".mp3" and ".MP3" extensions
can be played.
Only a consecutively written multisession disc can
be played. If there is a blank segment in the
Multisession disc, the disc can be played only up
to the blank segment.
Approx. 240 min.
(single-sided)
12 cm
Approx. 480 min.
(double-sided)
AUDIO
+
Approx. 80 min.
(single-sided)
VIDEO
DVD-VIDEO
8 cm
Approx. 160 min.
(double-sided)
~
~
If the disc is not closed, it will take longer to begin
12 cm
8 cm
74 min.
20 min.
playback and not all of the recorded files may be played.
AUDIO
For files encoded in Variable Bit Rate (VBR)
format, i.e. files encoded in both low bit rate and
high bit rate (e.g., 32Kbps ~ 320Kbps), the
sound may skip during playback.
A maximum of 500 tracks can be played per CD.
A maximum of 300 folders can be played per CD.
AUDIO-CD
DivX
AUDIO
+
12 cm
8 cm
~
~
VIDEO
Do not use the following type of discs!
CD-R JPEG Discs
~
LD, CD-G, CD-I, CD-ROM, DVD-ROM and
DVD-RAM discs cannot be played on this product.
If such discs are played, a <WRONG DISC
FORMAT> message appears on the TV screen.
~
~
Only files with the "jpg" extensions can be played.
If the disc is not closed, it will take longer to start
playing and not all of the recorded files may be
played.
~
DVD discs purchased abroad may not play on this
product.
~
~
Only CD-R discs with JPEG files in ISO 9660 or Joliet
format can be played.
JPEG file names should be 8 characters or less in
length and contain no blank spaces or special
characters (. / = +).
If such discs are played, a <Wrong Region. Please
check Disc.> message appears on the TV screen.
Disc Types And Disc Format
~
Only a consecutively written multisession disc can be
played. If there is a blank segment in the multisession
disc, the disc can be played only up to the blank
segment.
A maximum of 999 images can be stored on a folder.
When playing a Kodak/Fuji Picture CD, only the JPEG
files in the picture folder can be played.
This product does not support Secure (DRM) Media files.
CD-R Discs
~
Some CD-R discs may not be playable depending on
the disc recording device (CD-Recorder or PC) and the
condition of the disc.
~
~
~
Use a 650MB/74 minute CD-R disc.
~
Picture discs other than Kodak/Fuji Picture CDs may
take longer to start playing or may not play at all.
Do not use CD-R discs over 700MB/80 minutes as
they may not be played back.
~
~
Some CD-RW (Rewritable) media, may not be playable.
Only CD-Rs that are properly "closed" can be fully
played. If the session is closed but the disc is left open,
you may not be able to fully play the disc.
ꢆ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd
8
2011-03-05 �� 11:37:31
DVD±R/±RW, CD-R/RW Discs
~
Software updates for incompatible formats are not
supported.
(Example : QPEL, GMC, resolutions higher than
800 x 600 pixels, etc.)
~
If a DVD-R/-RW disc has not been recorded
properly in DVD Video format, it will not be
playable.
Supported Formats (DivX)
This product only supports the following media formats.
If both video and audio formats are not supported, the
user may experience problems such as broken images
or no sound.
Supported Video Formats
Format
Supported Versions
AVI
WMV
DivX3.11~DivX5.1, XviD
V1/V2/V3/V7
Supported Audio Formats
Sampling
Frequency
Format
Bit Rate
MP3
WMA
AC3
80~320kbps
56~128kbps
128~384kbps
1.5Mbps
44.1khz
44.1/48khz
44.1khz
DTS
~
~
DivX files, including audio and video files, created in
the DTS format can only support up to 6Mbps.
Aspect Ratio : Although the default DivX resolution is
640x480 pixels, this product supports up to
720x480 pixels. TV screen resolutions higher than
800 will not be supported.
~
When you play a disc whose sampling frequency is
higher than 48khz or 320kbps, you may experience
shaking on the screen during playback.
~
~
Sections with a high frame rate might not be played
while playing a DivX file.
Since this product only provides encoding formats
authorized by DivX Networks, Inc., a DivX file
created by the user might not play.
English
ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd
9
2011-03-05 �� 11:37:31
Getting Started
Notes on USB connection
14) Supported file formats
Still
Supported devices: USB storage media, MP3
player, digital camera
Format
Music
Movie
DivX
Picture
File name
JPG
MP3
WMA
WMV
.WMV
4Mbps
1) If a folder or file name is longer than 10
characters, it may not properly display or
operate.
File
extension
JPG
.JPEG
.MP3
.WMA
.AVI
80~320
kbps
56~128
kbps
Bit rate
Version
Pixel
–
4Mbps
2) A subtitle file bigger than 300KB may not be
properly displayed.
DivX3.11~
DivX5.1,
XviD
V1,V2,
V3,V7
–
640x480
–
–
–
V8
–
3) A certain USB/digital camera device, USB card
reader is not supported.
720x480
4) FAT16 and FAT32 file systems are supported.
Sampling
Frequency
44.1kHz
44.1kHz
44.1KHz~ 48KHz
5) Photo (JPEG), music (MP3, WMA) and video file
should have their names in Korean or English.
Otherwise, the file may not played.
6) Connect directly to the product's USB port.
Connecting through another cable may raise
problems with USB compatibility.
7) Inserting more than one memory device to a
multi-card reader may not operate properly.
8) PTP protocol for digital camera is not supported.
9) Do not disconnect USB device during a
"Reading" process.
10) Bigger the image resolution, the longer the delay
to displaying.
11) DRM applied MP3/WMA or video files
downloaded from a commercial site are not
played back.
12) External HDD device is not supported.
13) The maximum current supported by the USB
port for an external device is 500 mA (at 5V DC).
10
English
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 10
2011-03-05 �� 11:37:32
Description
Front Panel
3
1
2
4
5
6
7
8
9
10
DISC TRAY
Insert disc here.
Displays the playing status, time, etc.
1
DISPLAY
2
REMOTE CONTROL SENSOR
OPEN / CLOSE BUTTON
Detects signals from the remote control.
Opens and closes the disc tray.
3
4
(
)
The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM
5
FUNCTION BUTTON
STOP BUTTON
(
)
)
Stops disc playback.
(
6
7
8
9
Plays a disc or pauses playback.
Volume adjustment.
PLAY / PAUSE BUTTON
(
)
VOLUME CONTROL BUTTON (
,
)
Turns the product on and off.
POWER BUTTON (
USB PORT
)
Connect here and play files from external USB storage devices such as
MP3 players, USB flash memory, etc.
10
English
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 11
2011-03-05 �� 11:37:32
Getting Started
Rear Panel
1
2
3
4
5
6
7
8
9
VIDEO
OUT
FM ANT
SPEAKERS OUT
DIGITAL
AUDIO IN
HDMI OUT
FA NET
(Only For Service)
OPTICAL
COMPONENT
OUT
AUX IN
SURROUND
SUBWOOFER
SURROUND
The fan always revolves when the power is on. Ensure a minimum of 10cm of clear
space on all sides of the fan when installing the product.
COOLING FAN
1
SPEAKERS OUTPUT CONNECTORS
Connect the front, center, surround speakers and subwoofer.
2
EXTERNAL DIGITAL OPTICAL IN JACK
Use this to connect external equipment capable of digital output.
3
(DIGITAL AUDIO IN)
Using an HDMI cable, connect this HDMI output jack to the HDMI input jack
on your TV for the best quality picture.
HDMI OUT JACK
4
AUX IN JACKS
Connect to the 2CH Analog output of an external device (such as a VCR).
Connect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT jack.
Connect a TV with Component video inputs to these jacks.
Used for the service repair.
5
VIDEO OUT JACK
6
COMPONENT OUTPUT JACKS
7
FA NET (Only for Service)
8
FM ANTENNA JACK
Connect the FM antenna.
9
1ꢀ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 12
2011-03-05 �� 11:37:33
Remote control
Tour of the Remote Control
FUNCTION
TV SOURCE
This is mode selection button.
or
POWER
Turn the product on and off.
Press to select TV's video mode.
If you want to change to TV mode,
Set a Sleep time to shut off the
product.
press the TV button.
RECEIVER
SLEEP
DVD
TV
If you want to change to Home
To open and close the disc tray.
Cinema, press the DVD button.
1
4
7
2
5
8
0
3
6
Press numeric buttons to operate options.
9
DSP /EQ
Select the desired DSP/EQ audio
mode.
Select the desired Dolby Pro Logic II audio
mode.
Press to search backwards or
forwards.
Press to skip backwards or forwards.
Press to pause a disc.
Press to stop/play a disc.
Cut off the sound temporarily.
MUTE
Adjust the volume.
Search for active FM stations and
change channels.
TUNING
/CH
VOL
REPEAT
MENU
Allows you to repeat a title,
chapter, track or disc.
Press this to move to the home menu.
Press to check the disc menu.
DISC MENU
TITLE MENU
Use this to enter the Title menu.
TOOLS
INFO
Used to change the audio/subtitle
language, angle etc.
Display current disc(file) status.
Select on-screen menu items and
change menu value.
Press this to exit the menu.
RETURN
EXIT
D
Return to the previous menu.
Allow access to common functions
of the product such as the Photo List.
A
B
C
Select the desired P.BASS or
MP3 Enhancement setting.
AUDIO
DIMMER
GIGA
S.VOL
UPSCALE
Adjust the brightness of Display.
P.BASS
Regulate and stabilize the volume level
against a drastic volume change.
TUNER
Used to turn on/off GIGA Sound function.
S/W LEVEL
MEMORY
MO/ST
USB REC
Used to start USB recording.
Used to adjust the level of the
subwoofer.
Select MONO or STEREO for radio
broadcasting.
Press to preset FM stations.
English
1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 13
2011-03-05 �� 11:37:33
Getting Started
Installing batteries in the Remote
Control
TV Brand Code List
Brand
Code
Brand
Code
Admiral
* Battery size: AAA
56, 57, 58
MTC
NEC
18
(M.Wards)
A Mark
Anam
AOC
01, 15
18, 19, 20, 40, 59, 60
01, 02, 03, 04, 05, 06,
07, 08, 09, 10, 11,
12, 13, 14
Nikei
03
01, 18, 40, 48
Onking
Onwa
03
03
Bell & Howell
(M.Wards)
57, 58, 81
06, 07, 08, 09, 54, 66,
67, 73, 74
Brocsonic
Candle
59, 60
18
Panasonic
Penney
Philco
18
03, 15, 17, 18, 48, 54,
59, 62, 69, 90
Cetronic
03
15, 17, 18, 40, 48,
54, 62, 72
Citizen
03, 18, 25
Philips
Cinema
Classic
97
03
18
46
15
Pioneer
Portland
Proton
63, 66, 80, 91
✎
NOTE
15, 18, 59
`
Place batteries in the remote control so they match
the polarity : (+) to (+) and (–) to (–).
Always replace both batteries at the same time.
Do not expose the batteries to heat or flame.
The remote control can be used up to approximately
7 meters in a straight line.
Concerto
Contec
40
Quasar
06, 66, 67
Coronado
Radio Shack
RCA/
17, 48, 56, 60, 61, 75
`
`
`
18, 59, 67, 76, 77, 78,
92, 93, 94
Craig
03, 05, 61, 82, 83, 84
Proscan
Realistic
Croslex
Crown
62
03
03, 19
Sampo
Samsung
Sanyo
40
00, 15, 16, 17, 40, 43, 46,
47, 48, 49,
Curtis Mates
CXC
59, 61, 63
03
19, 61, 65
Setting the Remote Control
02, 03, 04, 15, 16, 17, 18,
19, 20, 21, 22, 23, 24, 25,
26, 27, 28, 29, 30, 32, 34,
35, 36, 48, 59, 90
Daewoo
Scott
03, 40, 60, 61
You can control certain functions of your TV with this
remote control.
Daytron
Dynasty
40
Sears
Sharp
15, 18, 19
15, 57, 64
03
When operating a TV with the remote control
Signature
03, 15, 40, 46, 59, 61,
64, 82, 83, 84, 85
Emerson
2000
57, 58
(M.Wards)
Sony
1. Press the TV button to set the remote control to
Fisher
Funai
19, 65
03
50, 51, 52, 53, 55
TV mode.
Soundesign
Spectricon
03, 40
01
Futuretech
General
Electric (GE)
03
2. Press the POWER button to turn on the TV.
06, 40, 56, 59, 66,
67, 68
SSS
18
3. While holding down the POWER button, enter
18, 40, 48, 54, 59,
60, 62
Hall Mark
40
Sylvania
the code corresponding to your brand of TV.
Hitachi
Inkel
15, 18, 50, 59, 69
Symphonic
Tatung
61, 95, 96
~
If there is more than one code listed for your
TV in the table, enter one at a time to
determine which code works.
45
56, 59, 67, 86
70
06
18
JC Penny
JVC
Techwood
Teknika
TMK
03, 15, 18, 25
18, 40
~
Example : For a Samsung TV
KTV
59, 61, 87, 88
03, 15, 40
15
While holding down the POWER button, use the
KEC
Toshiba
Vidtech
19, 57, 63, 71
18
KMC
number buttons to enter 00, 15, 16, 17 and 40.
01, 15, 16, 17, 37, 38,
39, 40, 41, 42, 43, 44
LG (Goldstar)
Luxman
Videch
Wards
Yamaha
York
59, 60, 69
4. If the TV turns off, the setting is complete.
15, 17, 18, 40, 48,
54, 60, 64
18
~
You can use the TV POWER, VOLUME,
CHANNEL, and Numeric buttons (0~9).
19, 54, 56, 59, 60, 62,
63, 65, 71
15, 17, 18, 48, 54, 59,
60, 62, 72, 89
LXI (Sears)
Magnavox
18
40
✎
NOTE
Marantz
Matsui
MGA
Mitsubishi/
MGA
40, 54
Yupiteru
Zenith
03
58, 79
01
`
The remote control may not work or some operations
may not be possible with some brands of TVs.
The remote control will work on a Samsung TV by
default.
54
18, 40
Zonda
18, 40, 59, 60, 75
Dongyang
03, 54
`
1ꢂ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 14
2011-03-05 �� 11:37:34
Connections
This section involves various methods of connecting the product to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
Position of the product
Place it on a stand or cabinet shelf, or under the
TV stand.
SW
Selecting the Listening Position
The listening position should be located about 2.5
to 3 times the distance of the TV's screen size
away from the TV.
Example : For 32" TV's 2~2.4m
For 55" TV's 3.5~4m
Place these speakers in front of your listening position, facing inwards (about 45°)
toward you. Place the speakers so that their tweeters will be at the same height
Front Speakers ei
as your ear. Align the front face of the front speakers with the front face of the
center speaker or place them slightly in front of the center speakers.
It is best to install it at the same height as the front speakers. You can also install it
directly over or under the TV.
Center Speaker
f
Place these speakers to the side of your listening position. If there isn't enough
room, place these speakers so they face each other. Place them about 60 to
90cm above your ear, facing slightly downward.
Surround Speakershj
Unlike the front and center speakers, the surround speakers are used to
*
handle mainly sound effects and sound will not come from them all the time.
The position of the subwoofer is not so critical. Place it anywhere you like.
Subwoofer
g
!
CAUTION
`
Do not let children play with or near the speakers. They could get hurt if the speaker falls.
`
`
When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
Keep the subwoofer out of the reach of children so as to prevent them from inserting their hands or alien
substances into the duct (hole) of the subwoofer.
`
Do not hang the subwoofer on the wall through the duct (hole).
✎
`
NOTE
If you place a speaker near your TV set, screen colour may be distorted because of the magnetic field
generated by the speaker. If this occurs, place the speaker away from your TV set.
English
1ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 15
2011-03-05 �� 11:37:34
Connections
Speaker Components
HT-D450
(L)
(R)
(L)
(R)
CENTER
ꢀ
FRONT
ꢀ
SURROUND
SUBWOOFER
ꢀ
SPEAKERꢀCABLEꢀ
Speaker Components
Assembled Speakers
HT-D453
HT-D453
(L) (R)
SCREW (5×15): 2EA
ꢀ
SCREW (4×20): 8EA
ꢀ
CENTER SPEAKER
SUBWOOFER
CENTER
ꢀ
FRONT
ꢀ
STAND
ꢀ
(L) (R)
SPEAKERꢀ
CABLEꢀ
SURROUND
SPEAKER
FRONT
SPEAKER
STANDꢀBASE
ꢀ
SUBWOOFER
ꢀ
SURROUND
HT-D455
HT-D455
(L) (R)
SCREW (5×15): 4EA
ꢀ
SCREW (4×20): 16EA
ꢀ
CENTER SPEAKER
FRONT
(L) (R)
ꢀ
STAND
ꢀ
CENTER
ꢀ
FRONT/SURROUND SPEAKER
SUBWOOFER
SUBWOOFER
ꢀ
STANDꢀBASE
ꢀ
SURROUND
SPEAKERꢀꢀCABLEꢀ
✎
`
NOTE
Refer to page 17 to install the Speakers on the Tallboy Stand.
1ꢄ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 16
2011-03-05 �� 11:38:00
Installing the Speakers on the Tallboy Stand
* HT-D453 only - Front Speakers
1
2
4
* HT-D455 only - Front/Surround Speakers
1. Turn the Stand Base upside-down and connect it to
the Stand.
2. Insert small screws (4*20, For connecting Stand & Stand
Base) clockwise into the four holes marked using a
screwdriver as shown in the illustration.
Stand
Base
Stand
3
5
Speaker
!
CAUTION : When you use a torque screwdriver, be
careful not to put excessive force. Otherwise, it runs
idle or can be damaged. (torque screwdriver- below 15
kg.f.cm)
Stand
3. Connect the upper Speaker to the assembled Stand.
4. Insert another large screw (5*15, For connecting Speaker
& Stand) clockwise into the hole on the rear of the
speaker using a screwdriver.
5. This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
Connecting The Speakers
1. Press down the terminal tab on the back of the speaker.
2. Insert the black wire into the black terminal (–) and the red wire into the red
terminal (+), and then release the tab.
3. Connect the connecting plugs to the back of the product by matching the
Black
Red
colours of the speaker plugs to the speaker jacks.
In case of HT-D450
Center Speaker
Front Speaker (R)
Front Speaker (L)
Surround Speaker (R)
Surround Speaker (L)
Subwoofer
* Refer to page 16 for the speakers of HT-D453/D455.
English
1ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 17
2011-03-05 �� 11:38:04
Connections
Connecting the video Out to your Tv
Choose one of the four methods for connecting to a TV.
METHOD 3 (Europe only)
SCART IN
METHOD 4 (supplied)
Green
Blue
Red
G
D
T
METHOD 2
METHOD 1
METHOD 1 : HDMI
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your TV.
METHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied)
from the COMPONENT OUT (Y, PB and PR) jacks on the back of the product to the Component Video Input
jacks on your TV.
METHOD 3 : Scart (Europe only)
If your television is equipped with a SCART input, connect the supplied video cable from the VIDEO OUT jack
on the back of the product to the VIDEO jack on the Scart adapter (Europe only), then connect the SCART
adapter's jack to the SCART IN jack on your television.
METHOD 4 : Composite Video
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack
on your TV.
1ꢆ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 18
2011-03-05 �� 11:38:05
✎
`
NOTE
Resolutions available for the HDMI output are 480p(576p), 720p,1080i/1080p. See page 23 for the resolution
setting.
`
`
This product operates in Interlace scan mode 480i(576i) for component/composite output.
After making the video connection, set the Video input source on your TV to match the corresponding Video
output mode on your product.
Turn this product on first before you set the video input source on your TV. See your TV owner's manual for
more information on how to select the TV's Video Input source.
! CAUTION
`
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
HDMI FUNCTION
HDMI Auto Detection Function
If your TV is Samsung TV and it supports CEC function.The product's video output will automatically change to HDMI
mode when connecting an HDMI cable while power is on.
~
HDMI (High Definition Multimedia Interface)
~
HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector. Using HDMI, the product transmits a digital video and audio signal and displays a vivid picture
on a TV having an HDMI input jack.
~
HDMI connection description
- HDMI outputs only a pure digital signal to the TV.
-
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears
on the screen.
~
~
What is the HDCP?
HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via
HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a
display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized
copies from being made.
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote
control. Anynet + can be used by connecting this product to a SAMSUNG TV using a HDMI Cable. This is
only available with SAMSUNG TV's that support Anynet+.
1. Connect the product to a Samsung TV with an HDMI cable. (See page 18)
2. Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)
✎
`
NOTE
The Anynet+ function supports some buttons of the remote control.
`
This function is not available if an HDMI cable does not support CEC.
`
Depending on your TV, certain HDMI output resolutions may not work.
Please refer to the user’s manual of your TV.
`
Please check the
logo (If your TV has an
logo, then it supports Anynet+ function.)
English
1ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 19
2011-03-05 �� 11:38:06
Connections
Connecting the fM Antenna
FM Antenna (supplied)
SPEAKERS OUT
DIGITAL
AUDIO IN
OPTICAL
SURROUND
SUBWOOFER
SURROUND
1. Connect the FM antenna supplied to the FM Antenna jack.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a
wall or other rigid surface.
✎
`
NOTE
This product does not receive AM broadcasts.
ꢀ0
English
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 20
2011-03-05 �� 11:38:06
Connecting Audio from External Components
S
White
Red
D
Audio Cable (not supplied)
If the external analogue
component has only one Audio
Out, connect either left or right.
Optical Cable
(not supplied)
Set-Top Box
OPTICAL
VCR
AUX
AUX : Connecting an External Analogue Component
Analogue signal components such as a VCR.
1. Connect AUX IN (Audio) on the back of the product to the Audio Out of the external Analogue
component.
~
Be sure to match the colours of the connecting jacks.
2. Press the FUNCTION button to select AUX input.
~
The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM
✎
`
NOTE
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the
VCR to this product.
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1. Connect the DIGITAL AUDIO IN (OPTICAL) on the back of the product to the Digital Output of the
external digital component.
2. Press the FUNCTION button to select D.IN.
~
The mode switches as follows :
DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM
English
ꢀ1
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 21
2011-03-05 �� 11:38:07
Setup
Before Starting (Initial Settings)
Setting the Setup menu
The access step may differ depending on the selected
menu. The GUI (Graphical User Interface) in this
manual may differ, depending on the firmware version.
1. Press the POWER button when it is plugged in
TV for the first time.
Initial Settings screen will be displayed.
1
Initial settings > On-Screen Language
Select a language for the on-screen displays
English
한국어
Nederlands
Français
Deutsch
Italiano
3
4
A
D
2
>
Move
"
Select
B
C
1
MENU BUTTON : Display the home menu.
2. Press the ▲▼ buttons to select the desired
language, then press the ENTER button.
RETURN BUTTON : Return to the previous
setup menu.
2
3. Press the ENTER button to select Start button.
4. Press the ▲▼ buttons to select desired TV Aspect,
ENTER / DIRECTION BUTTON
Move the cursor and select an item.
Select the currently selected item.
then press the ENTER button.
3
4
~
If the HDMI cable is connected to the
product, TV aspect does not appear.
Confirm the setting.
EXIT BUTTON : Exit the setup menu.
✎ NOTE
`
If you have not selected a preferred language in
the initial settings, you will see a language
selection window next time you turn on the
product.
Settings
`
`
`
Your language selection will apply to all menus:
On-Screen Menu, Disc Menu, Audio, Subtitle.
If you want to move to the previous screen, press
the RETURN button.
Once you select a menu language, you can
change it by pressing the STOP (@) button on the
remote control for more than 5 seconds with no
disc inserted.
Function DVD/CD
`
When the Initial Settings screen does not appear,
refer to the Initial Settings. (see page 26)
1. Press the POWER button.
2. Press the _+ buttons to select Settings, then
press the ENTER button.
3. Press the ▲▼ buttons to select the desired
menu, then press the ENTER button.
4. Press the ▲▼ buttons to select the desired
sub-menu, then press the ENTER button.
5. Press the ▲▼ buttons to select the desired
item, then press the ENTER button.
6. Press the EXIT button to exit the setup menu.
ꢀꢀ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 22
2011-03-05 �� 11:38:08
✎
`
NOTE
Display
This will optimize the picture quality according
to the content (In the DVD disc, etc) that you
want to play and the product or your BD Wise-
compliant Samsung TV.
You can configure various display options such as
the TV Aspect, Resolution, etc.
`
`
If you want to change the resolution in BD Wise
mode, you must set BD mode to Off in advance.
BD Wise will be disabled if the product is
connected to a device that does not support
BD Wise.
TV Aspect
Depending on the type of television you have, you
may want to adjust the screen setting.
~
4:3 Pan-Scan
Select when you want to see the 16:9
video supplied by the DVD without the
black bars on top and bottom, even
though you have a TV with a 4:3 ratio
screen(extreme left and right portion of
the movie picture will be cut off).
Resolution
Sets the output resolution of the HDMI video signal. The
number in 480p(576p), 720p, 1080i and 1080p indicates
the number of lines of video.
The i and p indicate interlace and progressive scan,
respectively.
~
~
4:3 Letter Box
~
~
~
~
~
480p(576p) : Outputs 480 lines of progressive video.
720p : Outputs 720 lines of progressive video.
Select when you want to see the total
16:9 ratio screen DVD supplies, even
though you have a TV with a 4:3 ratio
screen. Black bars will appear at the
top and bottom of the screen.
1080i : Outputs 1080 lines of interlaced video.
1080p : Outputs 1080 lines of progressive video.
BD Wise : Automatically sets the optimal resolution when
connected via HDMI to a TV with the BD Wise feature. (The
BD Wise menu item appears only if BD Wise is set to On.)
16:9 Wide
✎
NOTE
You can view the full 16:9 picture on
your widescreen TV.
`
If Component or Composite is connected, the
resolution supports only 480i(576i).
1080P may not appear depending on TV.
`
HDMI Format
✎
NOTE
You can optimize the colour setting from the HDMI
output. Select a connected device Type.
`
When using HDMI, the screen is automatically converted to the
16:9 Wide mode and TV Aspect is deactivated.
If a DVD is in the 4:3 ratio, you cannot view it in the wide screen.
Since DVD discs are recorded in various image formats, they will
look different depending on the software, the type of TV, and the
TV aspect ratio setting.
`
`
~
~
Monitor : Select if connected to a Monitor via HDMI.
TV : Select if connected to a TV via HDMI.
Video Out Signal
BD Wise
Different countries apply different TV standard.
You can select from NTSC or PAL.
(Samsung products only)
~
~
NTSC : You can select the NTSC video format
PAL : You can select the PAL video format
BD Wise is Samsung's latest inter-connectivity
feature. When you connect Samsung products with
BD-Wise to each other via HDMI, the optimum
resolution will be set automatically.
~
On : The original resolution of the DVD disc will
be output to the TV direct.
~
Off : The output resolution will be fixed
according to the Resolution previously set,
regardless of the resolution of the disc.
English
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 23
2011-03-05 �� 11:38:10
Setup
Adjusting Front/Surround Bal.
Audio
`
You can select between 0 and -6.
The volume decreases as you move closer to –6.
`
Speaker Setting
Adjusting Center/Surround/Subwoofer Level
Speaker Size
`
The volume level can be adjusted in steps from
+6dB to –6dB.
You can set the Speaker Size of the Center and Surround
Speakers, as well as Test Tone in this mode.
`
The sound gets louder as you move closer to +6dB
and quieter as you get closer to -6dB.
Settings
Delay Time
Speaker Setting
Speaker Size
Sound Edit
Delay Time
Test Tone
▶
If the speakers cannot be placed at equal distances from
the listening position, you can adjust the delay time of the
audio signals from the Center and Surround speakers.
You can also set the Test Tone in this mode.
:
Off
Setting up the Speaker Delay Time
"
Select
Select
'
Return
Return
mMove
"
'
When 5.1CH Surround Sound is played, you can
enjoy the best sound if the distance between you
and each speaker is the same.
Since the sounds arrive at the listening position at
different times depending on the placement of
speakers, you can adjust this difference by adding a
~
~
~
For the Front, the mode is set to Small.
For the Subwoofer, the mode is set to Present.
For the Center and Surround, you can switch the
mode to Small or None.
delay effect to the Center and Surround Speakers.
- Small : Select this when using the speakers.
- None : Select this when no speaker is
Settings
connected.
Delay Time
Front
Center
:
:
00mSEC
10mSEC
✎
`
NOTE
Surround
Subwoofer
Test Tone
The speaker mode may vary depending on the
Dolby Pro Logic and Stereo settings.
:
Off
<
Change
"
Select
'
Return
Return
Sound Edit
m
Move
"
Select
'
You can adjust the balance and level for each speaker.
Settings
✎
`
NOTE
Sound Edit
The Delay Time menu will be activated only when the
5.1 channel source is played.
Front Bal.
dB L
dB L
R
R
dB
dB
Surround Bal.
`
You can not set Center and Surround in this mode
when their Speaker Size is set to None.
Center Level
Surround Level
SW Level
dB
dB
dB
<
Change
Move
"
Select
Select
'
Return
Return
m
"
'
Press the ▲▼ buttons to select and adjust the
desired speaker.
Press the _+ buttons to adjust the settings.
ꢀꢂ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 24
2011-03-05 �� 11:38:11
Test Tone
Ideal Center
Speaker placement
Settings
Speaker Setting
Speaker Size
Sound Edit
Delay Time
Test Tone
:
On
▶
Ideal Surround
Speaker placement
"
Select
Select
'
'
Return
Return
m
Move
"
Place all speakers within this circle.
Use the Test Tone feature to check the speaker
connections.
Df: The distance from Front Speaker
Dc: The distance from Center Speaker
Ds: The distance from Surround Speaker
~
Press the _+ buttons to select On.
~
The test tone will be sent to Front Left ➞ Center
➞ Front Right ➞ Surround Right ➞ Surround
Left ➞ Subwoofer in order.
Setting the Center Speaker
To stop the test tone, press the ENTER button.
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
DRC (Dynamic Range Compression)
This feature balances the range between the loudest
and quietest sounds. You can use this function to
enjoy Dolby Digital sound when watching movies at
low volume at night.
Distance
between 0.00m 0.34m 0.68m 1.06m 1.40m 1.76m
Df and Dc
Delay
Time
00 ms 01 ms 02 ms 03 ms 04 ms 05 ms
~
You can select either Full, 6/8, 4/8, 2/8, off.
AUDIO SYNC
Video and audio sync may not match with digital TV.
If this occurs, adjust the audio delay time to
match the video
Setting the Surround Speaker
If the distance of Dc is equal to or longer than the
distance of Ds in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
~
You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
Distance
between 0.00m 1.06m 2.11m 3.16m 3.62m 5.29m
Ds and Dc
Delay
Time
HDMI Audio
00 ms 03 ms 06 ms 09 ms 12 ms 15 ms
The audio signals transmitted over the HDMI Cable
can be toggled On/Off.
✎
NOTE
With
~
Off : Video is transmitted over the HDMI
connection cable only, and audio is output
through the product speakers only.
`
PL II (Dolby Pro Logic II), the delay time
may be different for each mode.
With AC-3 and DTS, the delay time can be set
between 00 and 15mSEC.
The Center channel is only adjustable on 5.1
channel discs.
`
`
~
On : Both video and audio signals are transmitted
over the HDMI connection cable, and audio
is output through your TV speakers only.
English
ꢀꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 25
2011-03-05 �� 11:38:11
Setup
✎
`
NOTE
System
The default setting of this function is HDMI Audio Off.
HDMI Audio is automatically down-mixed to 2ch for
TV speakers.
`
Initial Settings
`
`
When HDMI Audio is set to On, PL II /DSP EQ
/P.BASS doesn't work.
By using the Initial Settings, you can set the language
and TV aspect.
With HDMI AUDIO set to 'On', the volume can be
adjusted only using the TV remote control.
✎
`
NOTE
If the HDMI cable is connected to the product,
TV aspect does not appear and it is set to 16:9
Wide automatically.
User EQ
You can configure the equalizer settings manually to
your preference.
DivX(R) Registration
Settings
View DivX(R) VOD Registration Code to purchase
and play DivX(R) VOD content.
User EQ
dB
6
·
·
·
·
·
NOTE
·
✎
·
·
·
`
This option is not activated if you select OK.To
activate this option, please activate the DivX(R)
Deactivation.
·
·
·
-6
250Hz 600Hz 1kHz
3kHz
6kHz 10kHz 15kHz
a
Reset
m
>
Adjust
<
Move
'
Return
Move
"
Select '
Return
`
Even after you reset the system, the settings of
DivX Registration will not be reset.
✎
`
NOTE
DivX(R) Deactivation
This can be also done using the DSP/EQ button.
(see page 34)
Select this to get a new registration code.
Audio Return Ch.
You can enjoy TV sound from the Home Cinema
speakers by using just one HDMI cable.
~
Off : Turn the Audio Return Channel function off.
~
Auto : Listen to TV sound from the Home Cinema
speakers if your TV is compatible with the Audio
Return Channel function.
NOTE
✎
`
When Anynet+ (HDMI-CEC) is Off, the Audio
Return Channel function is not available.
`
`
Using an ARC (Audio Return Channel)-
uncertified HDMI cable may cause a problem in
compatibility.
ARC function is only available if an ARC-
compliant TV is connected.
ꢀꢄ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 26
2011-03-05 �� 11:38:12
Change Password
Language
Select Change and enter the 4-digit password to set
the parental lock using the number buttons on the
remote control.
You can select the language you prefer for on-screen
menu, disc menu, etc.
OSD
Language
Select the language for the on-screen
displays.
Settings
Display
Audio
Parental Rating : Off
Password : Change
Select the language for the disc
menu displays.
Disc Menu
Audio
▶
System
Language
Security
Support
Select the language for disc audio.
Select the language for disc subtitles.
Subtitle
mMove
"
Select
'
Return
a To select a language that does not appear in the
menu, select OTHERS in the Disc Menu, Audio and
Subtitle, and enter the language code of your
country (see page 38).
If you forgot your password
1. Remove the disc.
a You cannot select OTHERS in the OSD Language
menu.
2. Press and hold the STOP (@) button on the
remote control for 5 seconds or more. All
settings will revert to the factory settings.
✎
`
NOTE
The selected language will only appear if it is
supported on the disc.
Security
Support
The Parental Lock function works in conjunction with
DVDs that have been assigned a rating, which helps you
control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
Product Information
Provide the product information such as Model
code, Softrware Version, etc.
Parental Rating
Select the rating level you want to set.
A larger number indicates that the program is intended
for adult use only. For example, if you select up to Level
6, discs that contain Level 7, 8 will not play.
Enter the password and then press the ENTER button.
- The password is set to "0000" by default.
- Once the setup is complete, you will be taken to the
previous screen.
English
ꢀꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 27
2011-03-05 �� 11:38:12
Basic Functions
Disc Playback
Audio CD(CD-DA)/MP3/WMA Playback
1. Press the OPEN/CLOSE (^) button.
BA
2. Place a disc gently into the tray with the disc's
label facing up.
3. Press the OPEN/CLOSE (^) button to close
Track01
1/17
the disc tray.
✎
`
NOTE
Resume function: When you stop disc play, the
product remembers where you stopped, so when
you press PLAY button again, it will pick up
where you left off. (This function works only with
DVDs.)
0:15
/
3:59
Function DVD/CD
Repeat Play Mode
Press the STOP button twice during playback to
disable the Resume function.
1. Insert an Audio CD(CD-DA) or an MP3 Disc into the
disc tray.
`
If no buttons are pressed on the product or
remote control for more than 3 minutes when the
product is in Pause mode, it will change to STOP
mode.
~
For an Audio CD, the first track will be played
automatically.
- Press the [] buttons to move to the
previous/next track.
`
`
The initial screen may appear different, depending
on the content of the disc.
~
For the MP3/WMA disc, press the _+
buttons to select Music, then press the
ENTER button.
Pirated discs will not play in this product because
they violate the CSS(Content Scrambling System:
a copy protection system) recommendations.
- Press the ▲▼_+ buttons to select a
desired file and press the ENTER button.
- Press the () buttons to move to the
previous/next pages.
a
will appear when an invalid button is pressed.
2. Press the STOP (@) button to stop playback.
TV Screen Saver/Power Saving Function
✎
NOTE
`
Some MP3/WMA-CDs may not play, depending on
the recording mode.
Table of contents of a MP3-CD varies depending on
the MP3/WMA track format recorded on the disc.
~
If no button input is made for more than 5 minutes
in Stop or Play mode, the screen saver will get
activated.
`
`
~
If the product is left in the screen saver mode for
WMA-DRM files cannot be played.
more than 20 minutes, the power will
automatically turn off. (Except during play a music)
ꢀꢆ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 28
2011-03-05 �� 11:38:12
JPEG file Playback
Using the Playback function
Images captured with a digital camera or camcorder, or
JPEG files on a PC can be stored on a CD and then
played back with this product.
Forward/Reverse Search
dBAD
1. Insert a JPEG disc on the disc tray.
2. Press the _+ buttons to select Photo, and
Press the () buttons for Search Function.
then press the ENTER button.
3. Press the ▲▼ buttons to select the folder you
( 1 ➞ ( 2 ➞ ( 3 ➞ ( 4
) 1 ➞ ) 2 ➞ ) 3 ➞ ) 4
want to play, and then press the ENTER button.
4. Press the ▲▼ buttons to select the photo you
want to play, and then press the ENTER button.
✎
NOTE
~
~
~
The selected file will play and slide show will
start.
`
No sound is played in search mode.
To stop slide show, press the PAUSE (#)
button.
You can view the previous/next file by
pressing the ◀,▶ buttons during the
slideshow mode.
`
The playback search produces sound only when
searching at )1 and )2 speed.
`
This function is available only for the CD-DA.
Skipping Scenes/Songs
ROOT
JPEG 1
JPEG 2
JPEG 3
dBAD
Press the [] buttons.
~
Each time the button is pressed during playback,
the previous or next chapter, track or directory
(file) will be played.
642 X 352
2010/01/01
Function DVD/CD
Pages
Return
~
You cannot skip chapters consecutively.
Slow Motion Play
Rotate Function
dD
G
Press the PAUSE (#) button and then ) button for
Press the GREEN(B) or YELLOW(C) button during the
Slow Motion play.
PAUSE mode.
ꢀ
d
D
~
~
GREEN(B) Button: Rotate 90° counterclockwise.
YELLOW(C) Button: Rotate 90° clockwise.
*1 ➞*2 ➞*3
✎
NOTE
✎
`
`
NOTE
`
The maximum resolutions supported by this
product are 5120 x 3480 (or 19.0 MPixel) for
standard JPEG files and 2048 x 1536 (or 3.0
MPixel) for progressive image files.
No sound is heard during slow playback.
Reverse slow playback does not work.
English
ꢀꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 29
2011-03-05 �� 11:38:12
Basic Functions
Step Motion Play
Using the Title Menu
dD
d
For DVDs containing multiple titles, you can view the
Press the PAUSE button repeatedly.
~
title of each movie.
TITLE MENU
The picture moves forward one frame each time
the button is pressed during playback.
1. During playback, press the TITLE
MENU button on the remote control.
✎
`
NOTE
2. Press the ▲▼_+ buttons to make
the desired selection, then press the
ENTER button.
No sound is heard during step motion playback.
5 Minute Skip function
✎
NOTE
`
Depending on the disc, menu setup items may
vary and this menu may not be available.
D
During playback, press the _,+ button.
Repeat Playback
~
Playback skips 5 minutes forward whenever you
press the button.
Playback skips 5 minutes backward whenever
you press the button.
+
~
dBAD
_
DVD/DivX Repeat
✎
`
NOTE
This function is available only for the DivX that
contains time information.
You can repeat the title, chapter or the section(A-B
Repeat) of the DVD/DivX.
Repeat
OFF
Using the Disc Menu
d
You can view the menus for the audio language,
subtitle language, profile, etc.
REPEAT
1. During DVD/DivX playback, press the
DISC MENU
REPEAT button on the remote control.
1. During playback, press the DISC
2. Press the ▲▼ buttons to select a
desired repeat mode, then press the
ENTER button.
MENU button on the remote control.
2. Press the ▲▼_+ buttons to make
the desired selection, then press the
ENTER button.
3. Press the ▲▼ buttons to select OFF to return
to normal play, then press the ENTER button.
✎
`
NOTE
Title ➞ Chapter ➞ A - ➞ Off
Z
D
Depending on the disc, menu setup items may
vary and this menu may not be available.
Title
➞
Folder
➞
All
➞
Off
ꢁ0
English
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 30
2011-03-05 �� 11:38:13
CD/MP3 Repeat
Displaying Disc Information
1. During the CD/ MP3 playback, press the
REPEAT button repeatedly to select the repeat
mode you want.
d
;
;
;
;
1/1
2/20
B
A
(Repeat Off ; Repeat Disc ; Repeat All ;
0:05:21
1/1 EN AC3 5.1
1/1 EN
1/1
Random ; Repeat Section A-B)
;
;
;
;
Change
Select
(Repeat Off ; Repeat Track;
Repeat Dir (Directory) ; Repeat All ; Random)
D
A-B Repeat Playback
1/6
1/1
dB
1/1 EN
Change
You can repeatedly play back a designated section
of a DVD or CD.
Select
1. During the DVD disc or CD playback, press the
REPEAT button on the remote control.
2. For DVD, press the ▲▼ buttons to select A-.
For CD press the REPEAT button repeatedly
until
appears.
TOOLS
1. During playback, press the TOOLS
3. Press the ENTER button at the point where you
button on the remote control.
want repeat play to start (A).
2. Press the ▲▼ buttons to select the
4. Press the ENTER button at the point where you
desired item.
want repeat play to stop (B).
3. Press the _+ buttons to make the desired
setup change and then press the ENTER
button.
5. To return to normal playback,
For DVD, press the ▲▼ buttons to select to OFF.
- You may use the number buttons of the
remote control to control some items.
For CD, press the REPEAT button to select to
.
4. To make Disc information disappear, press the
✎
`
NOTE
TOOLS button again.
The A-B Repeat function does not operate with
DivX, MP3 or JPEG discs.
✎
NOTE
`
If you are playing contents from the tools menu, some
functions may not be enabled depending on the disc.
You can also select DTS, Dolby Digital or Pro Logic,
depending on the disc.
`
`
Some tools menus may differ depending on discs and
files.
English
ꢁ1
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 31
2011-03-05 �� 11:38:16
Basic Functions
3. Press the _+ buttons to select the desired
TOOLS menu
subtitle language.
` Title(
) : To access the desired title
~
Depending on the languages on a DVD disc,
a different subtitle language is selected each
time the button is pressed.
when there is more than one in the disc.
For example, if there is more than one
movie on a DVD, each movie will be
identified as a Title.
✎
`
NOTE
` Chapter(
) : Most DVD discs are
Depending on the disc, the Subtitle and Audio
Language functions may not be available.
recorded in chapters so that you can
quickly find a specific chapter.
` Playing time( ) : Allows playback of
the film from a desired time. You must
enter the starting time as a reference.
The time search function does not
operate on some discs.
Caption Function
D
~
~
You must have some experience with video
` Audio(
): Refers to the film's
extraction and editing in order to use this feature
properly.
soundtrack language. A DVD Disc can
contain up to 8 audio languages.
` Subtitle(
): Refers to the subtitle
To use the caption function, save the caption file
(*.smi) in the same file name as that of the DivX
media file (*.avi) within the same folder.
languages available in the disc. You will
be able to choose the subtitle languages
or, if you prefer, turn them off from the
screen. A DVD Disc can contain up to
32 subtitle languages.
Example. Root
Samsung_007CD1.avi
Samsung_007CD1.smi
~
~
Up to 100 alphanumeric characters or 50 East
Asian characters (2 byte characters such as
Korean and Chinese) for the file name.
The subtitle of DivX files are *.smi, *.sub, *.srt over
148 kbyte is not supported.
` Angle(
): When a DVD contains
multiple angles of a particular scene, you
can use the Angle function.
Selecting the Audio Language
Angle Function
dD
1. Press the TOOLS button.
d
2. Press the ▲▼ buttons to select AUDIO (
)
This function allows you to view the same scene in
different angles.
display.
3. Press the _+ buttons to select the desired
1. Press the TOOLS button.
audio language.
~
Depending on the of languages on a DVD
disc, a different audio language is selected
each time the button is pressed.
2. Press the ▲▼ buttons to select ANGLE (
)
display.
3. Press the _+ buttons to select the desired
angle.
Selecting the Subtitle Language
✎
`
NOTE
The Angle function works only with discs on
which multiple angles have been recorded.
dD
1. Press the TOOLS button.
2. Press the ▲▼ buttons to select SUBTITLE (
)
display.
ꢁꢀ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 32
2011-03-05 �� 11:38:16
SLEEP
GIGA
You can set the time that the Home Cinema will shut
itself off.
The GIGA Sound Function amplifies bass and improves bass
twice as much for you to appreciate powerful real sound.
The GIGA Sound feature will be applied only to the
subwoofer.
Press the SLEEP button.
~
Each time the button is pressed, the
selection changes as follows
Press the GIGA button.
SLP 10
SLP 90
SLP 20
SLP 30
SLP 60
OFF.
✎
NOTE
SLP 120
SLP 150
`
If GIGA Sound is set to 'ON', other sound field
effects will not be applied.
`
`
If DOLBY PLII is set to 'ON', the GIGA Sound
effect will not be applied.
DIMMER
You can adjust the brightness of the
display on the main unit.
The GIGA Sound works when in 2-channel LPCM
mode only.
Press the DIMMER button.
S.VOL (SMART VOLUME)
Sound Mode
This will regulate and stabilize the volume level
against a drastic volume change when changing
channels or during a scene transition.
S . VOL
P.BASS
Press the S.VOL button.
The P.BASS function provides a bass boost to
reinforce the low frequencies.
~
Each time the button is pressed, the
selection changes as follows :
The MP3 ENHANCE function provides better sound quality
by upscaling the sampling frequency.
SMART VOLUME ON SMART VOLUME OFF
Press the P.BASS button.
S/W LEVEL
POWER BASS ON
➞
2 Channel
LPCM source
You can also press the S/W LEVEL button on the
remote control and use the _ or + buttons to adjust
the level of subwoofer.
POWER BASS OFF
MP3 ENHANCE ON ➞
POWER BASS ON ➞
POWER BASS OFF
MP3 file
Press the S/W LEVEL button.
✎
`
NOTE
The P.BASS function is only available with 2 channel
LPCM sources such as MP3, DivX, CD and WMA.
`
The P.BASS function does not work with GIGA
SOUND or Dolby Pro Logic ll modes.
If you press P.BASS in the DSP/EQ mode, the DSP/
EQ mode is automatically shut off and the
P. BASS function will be turned on.
The MP3 Enhancement function is only available
MP3 file.
`
English
ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 33
2011-03-05 �� 11:38:16
Basic Functions
DSP (Digital Signal Processor)/EQ
Dolby Pro Logic II Mode
You can select the desired Dolby Pro Logic II audio
mode.
~
DSP (Digital Signal Processor) : DSP modes have
been designed to simulate different acoustic
environments.
~
EQ : You can select POPS, JAZZ , ROCK, or USER
to optimize the sound for the genre of music you are
Press the
PL II button.
playing
.
DSP /EQ
Press the DSP/EQ button.
When listening to music, you can
experience sound effects as if you are
listening to the actual performance.
MUSIC
MOVIE
POPS,
JAZZ,
ROCK
Select POP, JAZZ, or ROCK,
Adds realism to the movie soundtrack.
depending on the genre of music
you're listening to.
You can listen to a 2CH sound source
in 5.1CH surround sound with all
speakers active.
You can enjoy music as you set in
“EQ:USER ”.
PROLOG
If you press ENTER in the “EQ:USER”
menu, you will see a window where you
can change the EQ settings to your
preference.
- A specific speaker(s) may not be
USER
output depending on the input signal.
You will hear multi-channel surround
sound.
MATRIX
STEREO
Provides a sense of presence as if in a
studio.
STUDIO
CLUB
Select this to listen to sound from the
front left and right speakers and the
subwoofer only.
Simulates the sound of a dance club
with a throbbing bass beat.
Provides a clear vocal as if listening in a
concert hall.
HALL
✎
`
NOTE
MOVIE
CHURCH
OFF
Provides the feeling of a movie cinema.
When selecting Pro Logic II mode, connect
your external device to the AUDIO INPUT jacks
(L and R) on the product. If you connect to only
one of the inputs (L or R), you cannot listen to
surround sound.
Provides the feeling of being in a
grand church.
Select this for normal listening.
`
`
The Pro Logic II function is only available in
Stereo mode.
The Pro Logic II function is not available while
playing AC3 signal in 2.1 channel mode.
✎
`
NOTE
The DSP/EQ function is only available in Stereo
mode.
`
The DSP/EQ function is not available while
playing AC3 signal in 2.1 channel mode.
ꢁꢂ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 34
2011-03-05 �� 11:38:17
5. Press the TUNER MEMORY button again.
Listening to Radio
~
Press the TUNER MEMORY button before
number disappears from the display.
Number disappears from the display and the
station is stored in memory.
Using buttons on the Remote Control
~
1. Press the FUNCTION button to select FM.
2. Tune in to the desired station.
6. To preset another station, repeat steps 2 to 5.
~
Preset Tuning 1 : You must first add a desired
frequency as a preset. Press the STOP (@)
button to select PRESET and then press the
TUNING/CHꢀ(
) button to select the preset
station.
~
~
Manual Tuning : Press the STOP (@) button to
select MANUAL and then press the TUNING/CHꢀꢀ
(
) button to tune in to a lower or higher
frequency.
Automatic Tuning : Press the STOP (@) button
to select MANUAL and then press and hold the
TUNING/CHꢀ(
search the band.
) button to automatically
Setting Mono/Stereo
Press the MO/ST button.
~
Each time the button is pressed, the
sound switches between STEREO and
MONO.
~
In a poor reception area, select MONO for a clear,
interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 in the memory
1. Press the FUNCTION button to select FM.
2. Press the TUNING/CH (
) button to select
<89.10>.
3. Press the TUNER MEMORY button.
Number flashes on the display.
~
4. Press the TUNING/CH (
)
buttons
to select preset number.
~
You can select between 1 and 15 presets.
English
ꢁꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 35
2011-03-05 �� 11:38:18
Advanced Functions
USB function
USB Recording
While playing CD-DA (Compact Disc Digital Audio)
using the USB Recording function or listening to the FM
radio or receiving audio source from an external device,
you can record the audio source in the USB memory.
Playing Media Files using the
USB Host Feature
You can enjoy media files such as pictures, movies
and music saved on an MP3 player, USB memory
stick or digital camera in high quality video with 5.1
channel sound by connecting the storage device to
the USB port of the product.
Ex) USB recording of CD-DA audio contents
1. Connect the USB device to your product.
2. Insert the CD-DA disc into the CD tray.
3. Press the USB REC button on the remote
control.
~
To start ripping the current track, press
the USB REC button on the remote
control while the system is playing a track or
stopped temporarily.
~
To record the entire CD, press and hold the USB
REC button on the remote control.
- "FULL CD RIPPING" appears on the display and
recording starts.
1. Connect the USB device to the USB port on the
4. Press the STOP (@) button to stop recording.
front panel of the product.
~
When USB recording of a CD is completed, you
will find a new folder named “RECORDING” in the
USB drive. The contents will be saved in the folder
in the MP3 format.
2. Press the FUNCTION button to select USB.
~
USB appears on the display screen and then
disappears.
~
When USB recording of FM radio or AUX source is
completed, you will find a new folder named
“TUNER RECORDING or AUX RECORDING” in the
USB drive. The contents will be saved in the folder
in the MP3 format.
3. Press the _+ buttons to select Videos, Photos
or Music.
- Select a file to play.
Safe USB Removal
✎
`
NOTE
Do not disconnect the USB connection or the power cable
during the USB Recording. Otherwise, it may cause damage
to the data.
To prevent damage to the memory stored in the
USB device, perform safe removal before
disconnecting the USB cable.
To stop USB Recording, press the STOP button and
disconnect the USB device after the system stops playing
the CD completely.
If you disconnect the USB connection during the USB
Recording, the system will turn off and you will not be able
to delete the recorded file.
If you connect the USB device to the system while it is
playing a CD, the system stops temporarily and will play
again.
~
Press the YELLOW(C) button.
- REMOVE will appear on the display.
~
Remove the USB cable.
`
`
✎
`
NOTE
To listen to your music files with 5.1 channel
sound, you must set the Dolby Pro Logic II
mode to Matrix. (See page 34)
`
Remove the USB cable from the USB port
slowly. Otherwise, it may cause damage to the
USB port.
`
`
DTS-CDs cannot be recorded.
If the recording duration is less than 5 seconds, a recording
file may not be created.
`
`
`
USB Recording works only if the USB device is formatted in
the FAT file system. (The NTFS file system is not supported.)
The audio signal will not be output during USB recording of
the CD.
When HDMI AUDIO is set to On, the USB Recording
function is not supported.
ꢁꢄ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 36
2011-03-05 �� 11:38:19
Other Information
Troubleshooting
Refer to the chart below when this product does not function properly. If the problem you are experiencing is
not listed below or if the instruction below does not help, turn off the product, disconnect the power cord,
and contact the nearest authorized dealer or Samsung Electronics Service Centre.
Symptom
Check/Remedy
I cannot eject the disc.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start.
• Check the region number of the DVD.
DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this product.
• Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is pressed.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
Sound is not produced.
•
•
No sound is heard during fast playback, slow playback, and step motion playback.
Are the speakers connected properly? Is the speaker setup correctly customized?
• Is the disc severely damaged?
Sound can be heard only from a
few speakers and not all 6.
• On certain DVD discs, sound is output from the front speakers only.
• Check if the speakers are connected properly.
• Adjust the volume.
• When listening to a CD, radio or TV, sound is output to the front speakers only.
Select "PROLOG" by pressing
use all six speakers.
PL II (Dolby Pro Logic II) on the remote control to
Dolby Digital 5.1 CH Surround
Sound is not produced.
•
Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround Sound is
produced only if the disc is recorded with 5.1 channel sound.
• Is the audio language correctly set to Dolby Digital 5.1-CH in the information display?
The remote control does not work.
•
Is the remote control being operated within its operation range of angle and distance?
• Are the batteries drained?
Have you selected the correct mode (RECEIVER DVD/TV)?
•
• Disc is rotating but no
picture is produced.
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• Picture quality is poor and
picture is shaking.
• A poorly manufactured disc may not be playable.
Audio language and subtitles do not work.
•
Audio language and subtitles will not work if the disc does not contain them.
The Disc/Title menu screen does not
appear even when the Disc/Title
function is selected.
• Are you using a disc that does not contain menus?
Aspect ratio cannot be changed.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX mode, or 4:3 PAN
SCAN mode, but 4:3 DVDs can be seen in 4:3 ratio only. Refer to the DVD disc
jacket and then select the appropriate function.
English
ꢁꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 37
2011-03-05 �� 11:38:19
Other Information
Symptom
Check/Remedy
• The product is not working.
(Example: The power goes out or
the front panel key doesn't work
or a strange noise is heard.)
• Press and hold the STOP (@) button on the remote control for longer than
5 seconds with no disc (reset function).
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• The product is not working
normally.
The rating level password has been • While “NO DISC” message appears on the display of the product, press and hold the
forgotten.
remote control's STOP (@) button for longer than 5 seconds. “INIT” appears on the
display and all settings will return to the default values.
And then press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Can't receive radio broadcast.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an area with good
reception.
Language code list
Enter the appropriate code number for OTHERS in the Disc Menu, Audio and Subtitle. (See page 27).
Code
Language
Code
Language
Code
Language
Code
Language
Code
Language
Code
Language
1027
1028
1032
1039
1044
1045
1051
Afar
1142
1144
1145
1149
1150
1151
1157
Greek
English
1239
1245
1248
1253
1254
1257
1261
Interlingue
Inupiak
1345
1347
1349
1350
1352
1353
1356
Malagasy
Maori
1482
1483
1489
1491
1495
1498
1501
Kirundi
Romanian
Russian
1527
1528
1529
1531
1532
1534
1535
Tajik
Thai
Abkhazian
Afrikaans
Amharic
Arabic
Esperanto
Spanish
Estonian
Basque
Persian
Indonesian
Icelandic
Italian
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Kinyarwanda
Sanskrit
Assamese
Aymara
Hebrew
Japanese
Sindhi
Sangro
1052
Azerbaijani
1165
Finnish
1269
Yiddish
1357
Malay
1502
Serbo-Croatian
1538
Turkish
1053
1057
1059
1060
1069
Bashkir
Byelorussian
Bulgarian
Bihari
1166
1171
1174
1181
1183
Fiji
1283
1287
1297
1298
1299
Javanese
Georgian
1358
1363
1365
1369
1376
Maltese
Burmese
Nauru
1503
1505
1506
1507
1508
Singhalese
Slovak
1539
1540
1543
1557
1564
Tsonga
Tatar
Faeroese
French
Frisian
Irish
Kazakh
Slovenian
Samoan
Shona
Twi
Greenlandic
Cambodian
Nepali
Ukrainian
Urdu
Bislama
Dutch
Bengali;
Bangla
1066
1186
Scots Gaelic
1300
Canada
1379
Norwegian
1509
Somali
1572
Uzbek
1067
1070
1079
1093
1097
Tibetan
Breton
1194
1196
1203
1209
1217
Galician
Guarani
Gujarati
Hausa
Hindi
1301
1305
1307
1311
1313
Korean
Kashmiri
Kurdish
Kirghiz
Latin
1393
1403
1408
1417
1428
Occitan
(Afan) Oromo
Oriya
1511
1512
1513
1514
1515
Albanian
Serbian
1581
1587
1613
1632
1665
Vietnamese
Volapuk
Wolof
Catalan
Corsican
Czech
Siswati
Punjabi
Sesotho
Sundanese
Xhosa
Polish
Yoruba
1103
Welsh
1226
Croatian
1326
Lingala
1435
Pashto, Pushto
1516
Swedish
1684
1697
Chinese
Zulu
1105
1109
Danish
1229
1233
Hungarian
Armenian
1327
1332
Laothian
1436
1463
Portuguese
Quechua
1517
1521
Swahili
Tamil
German
Lithuanian
Latvian,
Lettish
Rhaeto-
1130
Bhutani
1235
Interlingua
1334
1481
1525
Tegulu
Romance
ꢁꢆ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 38
2011-03-05 �� 11:38:20
Specifications
Weight
2.76 Kg
Dimensions
430 (W) x 59 (H) x 249 (D) mm
+5°C~+35°C
10 % to 75 %
General
Operating Temperature Range
Operating Humidity Range
Signal/noise ratio
70 dB
FM Tuner
Usable sensitivity
10 dB
Total harmonic distortion
0.5 %
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
480i(576i)
1 channel : 1.0 Vp-p (75 Ω load)
480i(576i)
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
1080p, 1080i, 720p, 480p(576p)
DVD (Digital Versatile Disc)
CD : 12 cm (COMPACT DISC)
CD : 8cm (COMPACT DISC)
Composite Video
Disc
Video Output
Video/Audio
Component Video
HDMI
142W x 2(3
142W(3
141W x 2(3
142W(3
Ω
)
Front speaker output
Center speaker output
Surround speaker output
Subwoofer output
Frequency range
S/N Ratio
Ω
)
Ω)
Ω)
Amplifier
20Hz~20KHz
65dB
Channel separation
Input sensitivity
60dB
(AUX)800mV
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
- Weight and dimensions are approximate.
- Design and specifications are subject to change without prior notice.
- For the power supply and Power Consumption, refer to the label attached to the product.
English
ꢁꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 39
2011-03-05 �� 11:38:20
Other Information
HT-D450
5.1ch speaker system
Speaker system
Front
3 Ω
Surround
3 Ω
Center
3 Ω
Subwoofer
3 Ω
Impedance
Frequency range
140Hz~20KHz 140Hz~20KHz 140Hz~20KHz 40Hz~160Hz
Output sound pressure level
86dB/W/M
142W
284W
86dB/W/M
141W
282W
86dB/W/M
142W
284W
88dB/W/M
142W
284W
Rated input
Speaker
Maximum input
Front : 90 x 141.5 x 68.5 mm
Surround : 84 x 104.5 x 68.5 mm
Center : 360 x 74.5 x 68.5 mm
Subwoofer : 168 x 350 x 285 mm
Dimensions (W x H x D)
Weights
Front: 0.58 Kg, Center : 0.96 Kg
Surround : 0.4 Kg, Subwoofer : 3.6 Kg
HT-D453
5.1ch speaker system
Speaker system
Front
3 Ω
Surround
3 Ω
Center
3 Ω
Subwoofer
3 Ω
Impedance
Frequency range
Output sound pressure level
Rated input
140Hz~20KHz 140Hz~20KHz 140Hz~20KHz 40Hz~160Hz
86dB/W/M
142W
86dB/W/M
141W
86dB/W/M
142W
88dB/W/M
142W
Speaker
Maximum input
284W
282W
284W
284W
Front : 90 x 1200 x 119 mm (stand base : 250 x 250)
Surround : 84 x 104.5 x 68.5 mm
Dimensions (W x H x D)
Center : 360 x 74.5 x 68.5 mm
Subwoofer : 168 x 350 x 285 mm
Front : 3.68 Kg, Center : 0.96 Kg
Surround : 0.4 Kg, Subwoofer : 3.6 Kg
Weights
HT-D455
5.1ch speaker system
Speaker system
Front
3 Ω
Surround
3 Ω
Center
3 Ω
Subwoofer
3 Ω
Impedance
140Hz~20KHz 140Hz~20KHz 140Hz~20KHz 40Hz~160Hz
Frequency range
Output sound pressure level
Rated input
86dB/W/M
142W
86dB/W/M
141W
86dB/W/M
142W
88dB/W/M
142W
Speaker
Maximum input
284W
282W
284W
284W
Front/Surround : 90 x 1200 x 119 mm (stand base : 250 x 250)
Center : 360 x 74.5 x 68.5 mm
Dimensions (W x H x D)
Weights
Subwoofer : 168 x 350 x 285 mm
Front/Surround : 3.68 Kg, Center : 0.96 Kg
Subwoofer : 3.6 Kg
ꢂ0
English
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 40
2011-03-05 �� 11:38:20
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre.
Area
` North America
Canada
Mexico
U.S.A
` Latin America
Argentine
Brazil
Contact Centre
Web Site
Area
Serbia
Contact Centre
0700 Samsung (0700 726
7864)
0800-SAMSUNG (726-7864)
902-1-SAMSUNG (902 172 678) www.samsung.com
0771 726 7864 (SAMSUNG)
Web Site
www.samsung.com
1-800-SAMSUNG (726-7864)
01-800-SAMSUNG (726-7864) www.samsung.com
1-800-SAMSUNG (726-7864)
www.samsung.com
Slovakia
Spain
Sweden
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/ch
www.samsung.com/
ch_fr/(French)
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
0800-333-3733
0800-124-421 / 4004-0000
800-SAMSUNG (726-7864)
01-8000112112
0-800-507-7267
1-800-751-2676
1-800-10-7267
800-6225
1-800-299-0013
800-7919267
1-800-234-7267
00-1800-5077267
800-7267
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
0848-SAMSUNG (7267864,
CHF 0.08/min)
Switzerland
Chile
U.K
Eire
Lithuania
Latvia
Estonia
0330 SAMSUNG (7267864)
0818 717100
8-800-77777
8000-7267
800-7267
Colombia
Costa Rica
Dominica
Ecuador
El Salvador
Guatemala
Honduras
Jamaica
` CIS
Russia
Georgia
Armenia
Azerbaijan
8-800-555-55-55
8-800-555-555
0-800-05-555
088-55-55-555
8-10-800-500-55-500
(GSM: 7799)
8-10-800-500-55-500
00-800-500-55-500
8-10-800-500-55-500
www.samsung.com
-
-
-
Nicaragua
Panama
Kazakhstan
www.samsung.com
Peru
0-800-777-08
1-800-682-3180
Puerto Rico
Trinidad &
Tobago
Venezuela
` Europe
Albania
Uzbekistan
Kyrgyzstan
Tadjikistan
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.ua
www.samsung.com/
ua_ru
1-800-SAMSUNG (726-7864)
0-800-100-5303
www.samsung.com
www.samsung.com
Ukraine
0-800-502-000
42 27 5755
0810 - SAMSUNG (7267864,
€ 0.07/min)
-
Belarus
Moldova
` Asia Pacific
Australia
New Zealand
China
810-800-500-55-500
00-800-500-55-500
-
-
Austria
www.samsung.com
www.samsung.com/
be (Dutch)
Belgium
02-201-24-18
1300 362 603
www.samsung.com
www.samsung.com/
0800 SAMSUNG (0800 726 786) www.samsung.com
400-810-5858 / 010-6475 1880 www.samsung.com
www.samsung.com/hk
be_fr (French)
Bosnia
Bulgaria
Croatia
05 133 1999
07001 33 11
-
www.samsung.com
Hong Kong
(852) 3698 4698
www.samsung.com/
hk_en/
062 SAMSUNG (062 726 7864) www.samsung.com
800-SAMSUNG (800-726786)
3030 8282 / 1800 110011 /
1800 3000 8282 / 1800 266 8282
0800-112-8888 /
021-5699-7777
0120-327-527
1800-88-9999
1-800-10-SAMSUNG(726-7864) /
1-800-3-SAMSUNG(726-7864) /
1-800-8-SAMSUNG(726-7864) /
02-5805777
1800-SAMSUNG (726-7864)
1800-29-3232 / 02-689-3232 www.samsung.com
0800-329-999
1 800 588 889
India
www.samsung.com
www.samsung.com
Samsung Zrt., česká organizační
Czech
www.samsung.com
složka, Oasis Florenc, Soko
-
lovská394/17, 180 00, Praha 8
70 70 19 70
Indonesia
Denmark
Finland
France
www.samsung.com
www.samsung.com
www.samsung.com
Japan
Malaysia
www.samsung.com
www.samsung.com
030 - 6227 515
01 48 63 00 00
01805 - SAMSUNG (726-7864
€ 0,14/Min)
06-80-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
+381 0113216899
261 03 710
023 207 777
020 405 888
0900-SAMSUNG
(0900-7267864) (€ 0,10/Min)
815-56 480
0 801 1SAMSUNG (172678)
/ 022-607-93-33
80820-SAMSUNG (726-7864)
Germany
www.samsung.com
Philippines
www.samsung.com
www.samsung.com
Hungary
Italia
Kosovo
Luxemburg
Macedonia
Montenegro
www.samsung.com
www.samsung.com
Singapore
Thailand
Taiwan
Vietnam
` Middle East
Bahrain
Egypt
Jordan
Morocco
Oman
Saudi Arabia
Turkey
-
www.samsung.com
www.samsung.com
www.samsung.com
-
-
8000-4726
08000-726786
800-22273
080 100 2255
800-SAMSUNG (726-7864)
9200-21230
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
Netherlands
Norway
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
Poland
Portugal
1. 08010 SAMSUNG (72678) -
doar din reţeaua Romtelecom,
tarif local
2. 021.206.01.10 - din orice
reţea, tarif normal
444 77 11
800-SAMSUNG (726-7864)
U.A.E
` Africa
Nigeria
Rumania
www.samsung.com
0800-SAMSUNG (726-7864)
0860-SAMSUNG (726-7864 )
www.samsung.com
www.samsung.com
South Africa
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 41
2011-03-05 �� 11:38:20
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not
be disposed of with other household waste at the end of their working life. Where marked, the chemical
symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference
levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm
to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of
waste and recycle them through your local, free battery return system.
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these
items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office,
for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Code No. AH68-02259B
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-XU-ENG-0303.indd 42
2011-03-05 �� 11:38:21
HT-D450
HT-D453
HT-D455
Système Home
cinéma numérique
Guide de l'utilisateur
Imaginez les possibilités
Merci d'avoir acheté ce produit Samsung.
Pour obtenir notre service complet, veuillez
enregistrer votre produit sur
www.samsung.com/register
Download from Www.Somanuals.com. All Manuals Search And Download.
1
HT-D450-ZF-FR-0304.indd
2011-03-05 �� 11:30:59
Consignes de sécurité
Avertissements de sécurité
POUR RÉDUIRE LES RISQUES D’ÉLECTROCUTION, NE RETIREZ JAMAIS LE CAPOT (NI L’ARRIÈRE).
LES PIÈCES DE CE PRODUIT NE SONT PAS RÉPARABLES PAR L’UTILISATEUR. VEUILLEZ CONTACTER UN TECHNICIEN
QUALIFIÉ POUR TOUTE RÉPARATION.
ATTENTION
RISQUE D’ÉLECTROCUTION
NE PAS OUVRIR
Ce symbole indique la présence d’une
tension dangereuse dans l’appareil,
présentant un risque d’électrocution ou de
blessures.
ATTENTION : AFIN D’ÉVITER TOUT RISQUE
D’ÉLECTROCUTION, LA BROCHE LA PLUS
LARGE DE LA FICHE DOIT ÊTRE TOTALEMENT
INSÉRÉE DANS LE TROU PLUS LARGE.
Ce symbole indique les directives
importantes qui accompagnent le
produit.
AVERTISSEMENT
CLASS 1
LASER PRODUCT
LASER PRODUKT
LASER LAITE
KLASSE 1
LUOKAN 1
KLASS 1
~
Afin de réduire tout risque d’incendie ou
d’électrocution, n’exposez jamais cet appareil à
la pluie ou à l’humidité.
LASER APPARAT
PRODUCTO LÁSER CLASE 1
ATTENTION
PRODUIT LASER DE CLASSE 1
~
~
~
~
Évitez toute projection d’eau sur l’appareil et ne posez
jamais d’objet contenant un liquide dessus (ex : un vase).
La fiche permet de débrancher l’appareil et doit toujours
être facilement accessible.
Cet appareil doit toujours être branché à une prise de
courant alternatif reliée à la terre.
Pour débrancher l'appareil, il convient de retirer la fiche de
la prise murale, il faut donc que cette dernière soit
facilement accessible.
Le lecteur de disque compact est homologué
comme produit LASER DE CLASSE 1.
L'utilisation des commandes, les réglages ou
l'exécution de procédures autres que celles
spécifiées ci-dessus peuvent conduire à une
exposition à des radiations dangereuses.
ATTENTION
~
ꢀDESꢀRAYONSꢀLASERꢀINVISIBLESꢀSONTꢀPRÉSENTSꢀ
LORSQUEꢀL'APPAREILꢀESTꢀOUVERTꢀOUꢀQUEꢀLESꢀ
DISPOSITIFSꢀDEꢀVERROUILLAGEꢀSONTꢀCIRCONVENUS.ꢀ
ÉVITEZꢀL'EXPOSITIONꢀAUXꢀRAYONS.
ꢀ
Français
Download from Www.Somanuals.com. All Manuals Search And Download.
2
HT-D450-ZF-FR-0304.indd
2011-03-05 �� 11:30:59
Précautions
~
~
Assurez-vous que l'alimentation en c.a. de votre habitation est conforme à la plaque d'identification située au dos de votre appareil.
Posez votre appareil à plat sur un meuble stable en veillant à laisser un espace de 7,5 à 10 cm autour de l'appareil afin d’assurer sa
ventilation correcte.
~
Ne le posez pas sur des amplificateurs ou autre appareil qui risque de chauffer.
Veillez à ne pas obstruer les orifices de ventilation.
~
~
~
Ne posez rien sur l’appareil.
Avant de déplacer l’appareil, assurez-vous que le compartiment du disque est vide.
Pour couper complètement l'alimentation de l’appareil, en particulier lorsque vous prévoyez de ne pas l'utiliser pendant une période
prolongée, retirez la fiche de la prise murale.
~
~
~
En cas d’orage, retirez la fiche c.a. de la prise murale. Les pointes de tension dues aux éclairs pourraient endommager l’appareil.
N’exposez pas l’appareil à la lumière directe du soleil ni à d’autres sources de chaleur. L’appareil pourrait surchauffer et mal fonctionner.
N’exposez pas l’appareil à l’humidité ni à aucune source de chaleur excessive et éloignez-le des appareils générant des ondes
magnétiques ou des champs électriques intenses (ex. : haut-parleurs).
~
~
~
Débranchez le câble d’alimentation de l’alimentation en c.a. en cas de dysfonctionnement.
Cet appareil n’est pas conçu pour un usage industriel. Il est uniquement réservé à un usage privé.
De la condensation peut se former si votre appareil ou votre disque a été entreposé dans un endroit exposé à des températures basses.
Si l’appareil doit être transporté pendant l’hiver, attendez environ 2 heures pour qu’il s’adapte à la température de la pièce avant de
l’utiliser.
~
Les piles utilisées avec cet appareil contiennent des produits chimiques dangereux pour l’environnement.
Ne les jetez pas avec les ordures ménagères.
Accessoires
Vérifiez que vous disposez bien des accessoires suivants.
FUNCTION
TV SOURCE
POWER
RECEIVER
SLEEP
DVD
TV
1
4
7
2
5
8
0
3
6
9
D
S
P
/
E
Q
MUTE
TUNING
/CH
VOL
DISC MENU
TOOLS
REPEA
T
MENU
T
I
T
L
E
M
E
N
U
INFO
RETURN
EXIT
D
A
B
C
AUDIO
DIMMER
GIGA
S.VOL
UPSCALE
P.BASS
TUNER
S
/
W
L
E
V
E
L
MEMOR
Y
MO/ST
U
S
B
R
E
C
Câble vidéo
Antenne FM
Guide de l’utilisateur
Télécommande/Piles (AAA)
Prise Péritel
Français
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
3
HT-D450-ZF-FR-0304.indd
2011-03-05 �� 11:31:00
Consignes de sécurité
Manipulation et rangement des disques
- Précautions
Licence
~
À PROPOS DE LA VIDÉO DIVX : DivX® est un format
vidéo numérique créé par DivX, Inc. Ceci est un appareil
DivX Certified® qui lit les vidéos au format DivX. Reportez-vous au site Web à
l'adresse www.divx.com pour obtenir plus d’informations et consulter les outils
logiciels permettant de convertir vos fichiers au format de vidéo DivX.
De petites éraflures sur un disque risquent de réduire
la qualité du son et de l’image ou de les faire sauter.
Prenez garde à ne pas rayer les disques lorsque
vous les manipulez.
À PROPOS DES VIDÉOS À LA DEMANDE DIVX : Cet appareil DivX Certified®
doit être enregistré pour lire les films vidéo à la demande (VOD) DivX
disponibles dans le commerce. Pour générer le code d’enregistrement,
accédez à la section DivX VOD dans le menu de configuration de l’appareil.
Consultez le site Web vod.divx.com afin d’obtenir de plus amples informations
sur les étapes à suivre pour terminer la procédure.
Manipulation des disques
~
~
Ne touchez pas la face de lecture du disque.
Tenez le disque par les tranches afin de ne
pas laisser de traces de doigts sur la
surface.
Le format DivX Certified®, qui permet de lire les vidéos DivX® y compris les
programmes d'appel DivX®, DivX Certified® ainsi que les logos qui y sont
associés sont des marques commerciales de DivX, Inc. exploitées sous licence.
Ce produit est couvert par un ou plusieurs des brevets américains suivants :
7,295,673; 7,460,668; 7,515,710; 7,519,274
~
Ne collez pas de papier ou de ruban adhésif sur le disque.
Rangement des disques
~
~
HDMI, le logo HDMI Logo et High-Definition
~
N’exposez pas les disques à la lumière directe du
Multimedia Interface sont des marques
soleil.
commerciales ou déposées de HDMI Licensing LLC aux États-Unis et dans
d'autres pays.
Ce produit intègre la technologie de protection contre la copie qui est
protégée par les brevets américains et d’autres droits de propriété
intellectuelle détenus par Rovi Corporation. Il est interdit de procéder à
l’ingénierie inverse ou au désassemblage de l’appareil.
~
~
Rangez-les dans un endroit frais et aéré.
Rangez-les dans des pochettes propres.
Positionnez-les verticalement.
✎
`
REMARQUE
Évitez les salissures sur les disques.
~
Dolby et le symbole représentant deux D sont des marques
déposées de Dolby Laboratories.
`
N’insérez jamais de disques fendus ou rayés.
Manipulation et rangement des disques
Droit d’auteur
Si un disque présente des traces de doigts, nettoyez-le à
l’aide d’un peu de nettoyant doux dilué dans de l’eau et
essuyez avec un chiffon doux.
© 2011 Samsung Electronics Co., Ltd. Tous droits
réservés.
~
Lors du nettoyage, essuyez doucement de
l’intérieur vers l’extérieur du disque.
Protection contre la copie
~
De nombreux disques DVD sont pourvus de protection contre la
copie. Par conséquent, vous devez uniquement brancher votre
appareil directement à votre téléviseur, et non à un magnétoscope.
Le fait de raccorder l’appareil à un magnétoscope provoque une
✎
REMARQUE
`
De la condensation peut de former lorsque de l’air
chaud entre en contact avec des parties froides situées
à l’intérieur de l’appareil. En cas de condensation à
l’intérieur de l’appareil, celui-ci risque de ne pas
fonctionner correctement. Si cela se produit, retirez le
disque et attendez une à deux heures en laissant
l’appareil sous tension.
image déformée avec des disques DVD protégés contre la copie
.
ꢂ
Français
Download from Www.Somanuals.com. All Manuals Search And Download.
4
HT-D450-ZF-FR-0304.indd
2011-03-05 �� 11:31:01
Table des matières
CONSIGNES DE SÉCURITÉ
2
3
3
4
4
4
4
Avertissements de sécurité
Précautions
Accessoires
Manipulation et rangement des disques - Précautions
Licence
2
Droit d’auteur
Protection contre la copie
7
7
Icones utilisées dans ce guide
Types et caractéristiques des disques
PRISE EN MAIN
11 Description
11
12
Panneau avant
Panneau arrière
7
13 Télécommande
15 Connexion des enceintes
BRANCHEMENTS
18 Raccordement de la sortie Video Out à votre téléviseur
20 Connexion de l'antenne FM
21
Raccordement audio des périphériques
15
22 Avant de commencer (Installation initiale)
22 Réglage du menu Setup
23 Affichage
CONFIGURATION
23
23
23
23
23
Format d’écran
BD Wise
22
Résolution
Format HDMI
Signal sortie vid.
24 Audio
24
25
25
25
26
26
Réglage Haut-Parleurs
DRC (Compression dynamique)
SyNC. AUDIO
AUDIO HDMI
EQ utilisateur
Canal retour audio
26 Système
26
26
26
Installation initiale
Enregistrement DivX(R)
DivX(R) Désactivation
27 Langue
27 Sécurité
27
27
Class. parental
Mot de passe
27 Assistance
27
Informations sur le produit
Français
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
5
HT-D450-ZF-FR-0304.indd
2011-03-05 �� 11:31:01
Table des matières
FONCTIONS DE BASE
28
28 Lecture d’un disque
28 Lecture de CD audio (CD-DA)/MP3/WMA
29 Lecture de fichiers JPEG
29 Utilisation de la fonction de lecture
33 Mode sonore
35 Écoute de la radio
36 Fonction USB
36 Enregistrement sur périphérique USB
FONCTIONS AVANCÉES
36
37 Dépannage
38 Liste des codes de langue
39 Caractéristiques
INFORMATIONS
COMPLÉMENTAIRES
37
•
•
Les figures et illustrations de ce manuel d’utilisation sont fournies à titre de référence et peuvent différer de
l’apparence réelle de l’appareil.
Des frais d'administration peuvent vous être facturés si
a. un technicien intervient à votre demande et que le produit ne comporte aucun défaut
(c.-à-d; si vous n'avez pas pris la peine de lire le présent manuel d'utilisation)
b. vous amenez le produit dans un centre de réparation alors qu'il ne comporte aucun défaut
(c.-à-d; si vous n'avez pas pris la peine de lire le présent manuel d'utilisation).
•
Le montant de ces frais d'administration vous sera signifié avant la réalisation de toute prestation ou visite à domicile.
ꢄ
Français
Download from Www.Somanuals.com. All Manuals Search And Download.
6
HT-D450-ZF-FR-0304.indd
2011-03-05 �� 11:31:01
Prise en main
Icones utilisées dans ce guide
Types et caractéristiques des disques
Assurez-vous de consulter les définitions des termes
suivants avant de lire le guide d’utilisation.
Code de région
Icône
Terme
Définition
Cet appareil ainsi que les disques sont codés par région.
Ces codes régionaux doivent correspondre pour que le
disque puisse être lu. Si les codes ne correspondent pas, le
disque ne pourra pas être lu.
Il s’agit d’une fonction
disponible avec les disques
DVD-Vidéo ou DVD±R/±RW
ayant été enregistrés et
finalisés en mode vidéo.
DVD
d
Type de
disque
Code de
région
Région
Il s’agit d’une fonction
États-Unis, territoires des États-
Unis et Canada
1
2
3
CD
disponible avec un CD de
données (CD DA, CD-R/-RW).
B
A
G
Europe, Japon, Moyen-
Orient, Égypte, Afrique du Sud,
Groenland
Il s’agit d’une fonction
disponible avec les disques
CD-R/-RW.
MP3
JPEG
Taiwan, Corée, Philippines,
Indonésie, Hong Kong
Il s’agit d’une fonction
disponible avec les disques
CD-R/-RW.
Mexique, Amérique du Sud,
Amérique centrale, Australie,
Nouvelle Zélande, Îles du
Pacifique, Caraïbes
DVD-VIDEO
4
Il s’agit d’une fonction
disponible avec les disques
MPEG4 (DVD±R/±RW, CD-
R/-RW).
DivX
D
Russie, Europe de l’Est, Inde,
la plupart des pays d’Afrique,
Corée du Nord, Mongolie
5
6
Indique un cas où une
fonction ne peut pas être
exécutée ou des réglages
pourraient être annulés.
ATTENTION
!
Chine
Conseils ou instructions
REMARQUE fournis pour vous aider à
✎
exécuter chaque fonction.
Permet d’accéder directement
et facilement à une fonction
Touche de
via la simple pression du
raccourci
bouton de la télécommande
spécifié.
Français
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
7
HT-D450-ZF-FR-0304.indd
2011-03-05 �� 11:31:02
Prise en main
Types de disques pouvant être lus
Signaux
Disques MP3 CD-R
~
~
~
~
~
Seuls les disques CD-R contenant des fichiers MP3
au format ISO 9660 ou Joliet peuvent être lus.
Types de disques et
marques (logos)
Dimensions
du disque
Temps de lecture maxi.
Les noms des fichiers MP3 ne doivent contenir aucun
espace ni caractère spécial (. / = +).
Utilisez des disques enregistrés à une vitesse de
compression/décompression supérieure à 128 Kbits/s.
Seuls les fichiers possédant les extensions « mp3 » et
« MP3 » peuvent être lus.
Seuls les disques gravés en multisessions
consécutives peuvent être lus. Si un disque
multisession contient. Un segment vierge, il pourra
être lu uniquement jusqu'au segment vierge.
enregistrés
Environ 240 min.
(une face)
12 cm
8 cm
Environ 480 min.
(double face)
AUDIO
+
Environ 80 min.
(une face)
VIDÉO
DVD-VIDEO
Environ 160 min.
(double face)
~
~
Si un disque n’est pas finalisé, l’appareil mettra plus
de temps à démarrer la lecture et il est possible que
tous les fichiers enregistrés ne soient pas lus.
Pour les fichiers encodés au format VBR (Variable Bit
Rate), c’est-à-dire les fichiers ayant à la fois un débit
binaire faible et un débit binaire élevé (ex. : 32 Kbits/s
à 320 Kbits/s), le son risque de sauter lors de la
lecture.
12 cm
8 cm
74 min.
20 min.
AUDIO
CD AUDIO
DivX
AUDIO
+
12 cm
8 cm
VIDÉO
~
~
Un maximum de 500 pistes par CD peut être lu.
Un maximum de 300 dossiers par CD peut être lu.
N’utilisez pas les types de disques
suivants
~
Les disques LD, CD-G, CD-I, CD-ROM, DVD-ROM et DVD-
RAM ne peuvent pas être lus par cet appareil. Si vous
essayez de lire ces types de disques, le message
<WRONG DISC FORMAT (Format de disque incorrect)>
s’affiche sur l’écran du téléviseur.
Les disques DVD achetés à l’étranger risquent de ne pas
être lus par cet appareil. Si vous essayez de les lire, le
message <Wrong Region. Please check Disc. (Mauvaise
région. Vérif. disque.)> s’affiche sur l’écran du téléviseur.
Disques JPEG CD-R
~
Seuls les fichiers possédant l’extension « jpg »
peuvent être lus.
~
Si un disque n’est pas finalisé, l’appareil mettra
plus de temps à démarrer la lecture et il est
possible que tous les fichiers enregistrés ne soient
pas lus.
~
~
~
Seuls les disques CD-R contenant des fichiers JPEG
au format ISO 9660 ou Joliet peuvent être lus.
Les noms des fichiers JPEG doivent contenir 8
caractères maximum et ne comporter aucun
espace ni caractère spécial (. / = +).
Seuls les disques gravés en multisessions
consécutives peuvent être lus. Si un disque
multisession contient un segment vierge, il pourra
être lu uniquement jusqu'au segment vierge.
Un maximum de 999 images peut être enregistré
dans un dossier.
Lors de la lecture d’un CD d’images Kodak/Fuji,
seuls les fichiers JPEG contenus dans le dossier
d’images peuvent être lus.
Il est possible que les disques d’images autres que
les CD d’images Kodak/Fuji soient plus longs au
démarrage de la lecture ou ne soient pas lus du tout.
Types et formats des disques
Cet appareil ne prend pas en charge les fichiers sécurisés (DRM).
~
Disques CD-R
~
Il est possible que certains disques CD-R ne puissent pas être
lus selon l’appareil ayant servi à l’enregistrer (graveur de CD,
PC) et l’état du disque.
Utilisez des disques CD-R 650 Mo/74 minutes.
N’utilisez pas de disques CD-R de plus de 700 Mo/80 minutes
car il est possible qu’ils ne puissent pas être lus.
Il est possible que certains supports CD-RW (réinscriptibles)
ne puissent pas être lus.
Seuls les disques CD-R correctement finalisés peuvent être lus
intégralement. Si la session est fermée alors que le disque
n’est pas finalisé, vous risquez de ne pas pouvoir lire le disque
intégralement.
~
~
~
~
~
~
ꢆ
Français
Download from Www.Somanuals.com. All Manuals Search And Download.
8
HT-D450-ZF-FR-0304.indd
2011-03-05 �� 11:31:02
~
Cet appareil n’acceptant que les formats
d’encodage autorisés par DivX Networks, Inc., il
est possible qu’un fichier DivX créé par l’utilisateur
ne puisse pas être lu.
DVD±R/±RW, CD-R/-RW
~
Les mises à jour logicielles pour les formats
incompatibles ne sont pas prises en charge.
(Exemple : QPEL, GMC, résolution supérieure
à 800 x 600 pixels, etc.)
~
Si un disque DVD-R/-RW n’a pas été
enregistré correctement au format DVD
Vidéo, il ne pourra pas être lu.
Formats pris en charge (DivX)
Cet appareil ne prend en charge que les formats de
support suivants. Si aucun des formats, vidéo ou audio,
n’est pris en charge, l’utilisateur pourrait être privé de
son et les images pourraient être médiocres.
Formats vidéo pris en charge
Format
Versions prises en charge
AVI
WMV
DivX3.11~DivX5.1, XviD
V1/V2/V3/V7
Formats audio pris en charge
Fréquence
d’échantillonnage
Format
Débit binaire
MP3
WMA
AC3
80 à 320 Kbits/s
56 à 128 Kbits/s
128 à 384 Kbits/s
1,5 Mbits/s
44,1 kHz
44,1/48 kHz
44,1 kHz
DTS
~
~
Les fichiers DivX, y compris les fichiers audio et
vidéo, créés au format DTS ne peuvent accepter
que 6 Mbits/s maximum.
Format de l’image : bien que la résolution DivX par
défaut soit 640x480 pixels, cet appareil peut prendre
en charge un format allant jusqu'à 720x480 pixels.
Les résolutions d’écran TV supérieures à 800 ne
sont pas prises en charge.
~
Si la fréquence d’échantillonnage de votre disque est
supérieure à 48 kHz ou à 320 Kbits/s, vous pouvez
percevoir des tremblements à l’écran pendant la
lecture.
Les parties ayant un format d’image élevé risquent de
ne pas être lues lors de la lecture d’un fichier DivX.
~
Français
ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
9
HT-D450-ZF-FR-0304.indd
2011-03-05 �� 11:31:02
Prise en main
Notes sur la connexion USB
14) Formats de fichiers pris en charge
Image
fixe
Appareils pris en charge : Supports de stockage
USB, lecteur MP3, caméra numérique
Format
Musique
Film
Nom de
fichier
JPG
MP3
WMA
WMV
DivX
.AVI
1) Affichage ou fonctionnement non garanti pour les
dossiers ou fichiers dont le nom excède 10
caractères.
Extension
de fichier
JPG
.JPEG
.MP3
.WMA
.WMV
80 à
320
2) Un fichier de sous-titre supérieur à 300 Ko ne peut
pas s’afficher correctement.
3) Certains types de périphériques USB, de
caméras numériques et de lecteurs de carte
USB ne sont toutefois pas pris en charge.
4) Les systèmes de fichiers FAT16 et FAT32 ne sont pas
pris en charge.
5) Les fichiers photo (JPEG), musique (MP3, WMA) et
vidéo doivent porter des noms en coréen ou en
anglais. Autrement, le fichier risque de ne pas être lu.
Débit
4
56 à 128
Kbits/s
–
–
4 Mbits/s
binaire
Mbits/s
Kbits/s
DivX3.11~
DivX5.1,
XviD
V1,V2,
V3,V7
Version
Pixel
–
V8
640x480
–
–
–
720x480
44,1 kHz à 48 kHz
Fréquence
d’échantillonnage
44,1 kHz
44,1 kHz
6) Effectuez la connexion directement au port USB du
produit. La connexion via un autre câble peut
provoquer des problèmes de compatibilité USB.
7) L’insertion de plusieurs périphériques de mémoire
dans un lecteur multicarte peut entraîner un
dysfonctionnement.
8) Le protocole PTP pour caméras numériques n’est pas
pris en charge.
9) Ne déconnectez pas le périphérique USB durant un
processus de « lecture ».
10) Plus la résolution de l’image est élevée, plus lent le
délai d'affichage de l'image.
11) Les fichiers MP3/WMA ou vidéo de type DRM
téléchargés depuis un site commercial ne sont pas lus
par l’appareil.
12) Le périphérique de disque dur externe n’est pas pris
en charge.
13) La tension maximale prise en charge par le port USB
connecté au périphérique USB externe est de 500 mA
(5 V CC).
10
Français
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 10
2011-03-05 �� 11:31:02
Description
Panneau avant
3
1
2
4
5
6
7
8
9
10
TIROIR DISQUE
Insérez le disque ici.
Affiche le statut de lecture, l’heure, etc.
1
AFFICHAGE
2
CAPTEUR DE LA TÉLÉCOMMANDE
TOUCHE OUVRIR/FERMER
TOUCHE DE FONCTION
TOUCHE ARRÊT
TOUCHE LECTURE/PAUSE
Détecte les signaux provenant de la télécommande.
Permet d’ouvrir et de fermer le tiroir disque.
3
4
(
)
mode change dans l’ordre suivant :
DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM
5
(
)
Interrompt la lecture du disque.
(
)
6
7
8
9
Permet de lire le disque ou de l’interrompre momentanément.
Réglage du volume
(
)
TOUCHE DE RÉGLAGE DU VOLUME (
TOUCHE DE MISE SOUS TENSION (
,
)
Permet de mettre l’appareil sous et hors tension.
)
Permet de lire des fichiers contenus sur des périphériques de stockage USB
externes tels que des lecteurs MP3, des cartes mémoire flash USB, etc.
PORT USB
10
Français
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 11
2011-03-05 �� 11:31:03
Prise en main
Panneau arrière
1
2
3
4
5
6
7
8
9
VIDEO
OUT
FM ANT
SPEAKERS OUT
DIGITAL
AUDIO IN
HDMI OUT
FA NET
(Only For Service)
OPTICAL
COMPONENT
OUT
AUX IN
SURROUND
SUBWOOFER
SURROUND
Le ventilateur reste en activité tant que l'appareil est sous tension. Lors de l’installation
de l’appareil, prévoyez un espace d’au moins 10 cm de chaque côté du ventilateur.
VENTILATEUR
1
CONNECTEURS DE SORTIE DES
ENCEINTES
Permettent de connecter les enceintes avant, centrale et ambiophoniques ainsi que le
caisson de graves.
2
PRISE D'ENTRÉE OPTIQUE NUMÉRIQUE
EXTERNE (DIGITAL AUDIO IN)
Permet de raccorder un appareil périphérique à sortie numérique.
3
À l’aide d’un câble HDMI ; raccordez cette sortie HDMI à la borne d'entrée
HDMI de votre téléviseur pour une image optimale.
PRISE DE SORTIE HDMI (HDMI OUT)
4
Permet de raccorder la sortie analogique à 2 canaux d'un périphérique (un
magnétoscope par exemple).
PRISES AUX IN
5
Permet de raccorder la prise de sortie VIDEO OUT de cet appareil à la prise
d'entrée VIDEO IN de votre téléviseur.
PRISE DE SORTIE VIDÉO (VIDEO OUT)
6
Permet de raccorder l’appareil aux prises d'entrée vidéo composantes
d'un téléviseur.
PRISES DE SORTIE VIDÉO COMPOSANTES
7
FA NET
Ceci est utilisé pour le service de réparations.
Permet de brancher l'antenne FM.
8
9
(Uniquement pour les réparations)
PRISE D'ANTENNE FM
1ꢀ
Français
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 12
2011-03-05 �� 11:31:04
Télécommande
Fonctions de la télécommande
Il s’agit d’une touche de sélection
de mode.
FUNCTION
TV SOURCE
ou
POWER
Appuyez pour sélectionner le mode
vidéo du téléviseur.
Permet de mettre l’appareil sous et hors tension.
Si vous voulez basculer en mode
Permet de régler l'heure de mise
RECEIVER
SLEEP
téléviseur, appuyez sur le bouton TV.
en veille de l'appareil.
Si vous souhaitez basculer en mode
Home cinéma, appuyez sur le bouton
DVD.
DVD
TV
Permet d’ouvrir et de fermer le tiroir disque.
1
4
7
2
5
8
0
3
6
Appuyez sur les touches numériques
pour activer les options.
9
DSP /EQ
Permet de sélectionner le mode audio
Dolby Pro Logic II souhaité.
Permet de sélectionner le mode
audio (DSP ou EQ).
Permet de revenir à la piste précédente
ou de passer à la suivante.
Permet de revenir en arrière ou
d’avancer.
Permet d'arrêter/de démarrer la
Permet d’interrompre momentanément
la lecture d'un disque.
lecture d'un disque.
Permet de couper momentanément le son.
Permet de régler le volume.
MUTE
Permet de rechercher les stations FM
actives et de changer de canaux.
TUNING
/CH
VOL
DISC MENU
TOOLS
REPEAT
MENU
Permet de répéter la lecture d’un titre, d’un
chapitre, d’une plage ou d’un disque.
Appuyez sur ceci pour revenir au
menu d’accueil.
Permet de consulter le menu du disque.
TITLE MENU
Permet d’accéder au menu Title.
INFO
Permet de modifier la langue de
doublage/des sous-titres, l’angle, etc.
Permet d’afficher le statut du disque
(ou fichier) en cours de lecture.
Permet de sélectionner les options de menu
affichées à l’écran et de changer les valeurs
de menu.
Permet de quitter le menu.
RETURN
EXIT
D
Permet de revenir au menu précédent.
Autorisez l’accès aux fonctions communes
du produit, telles que la Liste de photos.
A
B
C
Permet de sélectionner le mode
P.BASS ou MP3 Enhancement.
AUDIO
DIMMER
GIGA
S.VOL
UPSCALE
Permet de régler la luminosité de
l’affichage.
P.BASS
Permet de réguler et de stabiliser
TUNER
Permet d’activer et de désactiver la
le volume pour éviter un
S/W LEVEL
MEMORY
MO/ST
USB REC
fonction GIGA Sound.
changement radical de celui-ci.
Permet de démarrer l'enregistrement
Permet de régler le niveau du caisson
de graves.
sur le périphérique USB.
Permet de sélectionner MONO ou STEREO
permet de prérégler les stations FM.
pour la diffusion de la radio.
Français
1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 13
2011-03-05 �� 11:31:04
Prise en main
Installation des piles dans la
télécommande
Liste des codes par marque de téléviseur
Marque
Code
Marque
Code
Admiral
* Type de piles : AAA
56, 57, 58
MTC
NEC
18
(M.Wards)
A Mark
Anam
AOC
01, 15
18, 19, 20, 40, 59, 60
01, 02, 03, 04, 05, 06,
07, 08, 09, 10, 11,
12, 13, 14
Nikei
03
01, 18, 40, 48
Onking
Onwa
03
03
Bell & Howell
(M.Wards)
57, 58, 81
06, 07, 08, 09, 54, 66,
67, 73, 74
Brocsonic
Candle
59, 60
18
Panasonic
Penney
Philco
18
03, 15, 17, 18, 48, 54,
59, 62, 69, 90
15, 17, 18, 40, 48,
54, 62, 72
Cetronic
03
✎
`
REMARQUE
Placez les piles dans la télécommande en respectant
les polarités : (+) avec (+) et (–) avec (–).
Citizen
03, 18, 25
Philips
Cinema
Classic
97
03
18
46
15
Pioneer
Portland
Proton
63, 66, 80, 91
15, 18, 59
`
`
`
Remplacez toujours les deux piles en même temps.
N’exposez pas les piles à la chaleur ou à une flamme.
La portée de la télécommande est d'environ 7 mètres
en ligne droite.
Concerto
Contec
40
Quasar
06, 66, 67
Coronado
Radio Shack
RCA/
17, 48, 56, 60, 61, 75
18, 59, 67, 76, 77, 78,
92, 93, 94
Craig
03, 05, 61, 82, 83, 84
Proscan
Realistic
Croslex
Crown
62
03
03, 19
Réglage de la télécommande
Vous pouvez contrôler certaines fonctions de votre
téléviseur à l’aide de cette télécommande.
Sampo
Samsung
Sanyo
40
00, 15, 16, 17, 40, 43, 46,
47, 48, 49,
Curtis Mates
CXC
59, 61, 63
03
19, 61, 65
02, 03, 04, 15, 16, 17, 18,
19, 20, 21, 22, 23, 24, 25,
26, 27, 28, 29, 30, 32, 34,
35, 36, 48, 59, 90
Daewoo
Scott
03, 40, 60, 61
Pour contrôler un téléviseur à l’aide de la télécommande
1. Appuyez sur la touche TV pour régler la télécommande
sur le mode TV.
2. Appuyez sur la touche POWER pour allumer le téléviseur.
3. Tout en maintenant la touche POWER enfoncée, saisissez
le code correspondant à la marque de votre téléviseur.
Daytron
Dynasty
40
Sears
Sharp
15, 18, 19
15, 57, 64
03
Signature
03, 15, 40, 46, 59, 61,
64, 82, 83, 84, 85
Emerson
2000
57, 58
(M.Wards)
Fisher
Funai
19, 65
03
Sony
50, 51, 52, 53, 55
Soundesign
Spectricon
03, 40
01
~
Si plusieurs codes correspondant à votre téléviseur
figurent dans le tableau, saisissez-les les uns après
les autres pour trouver le code approprié.
Exemple : Pour un téléviseur Samsung
Tout en maintenant le bouton POWER enfoncé,
utilisez les touches numériques pour entrer 00, 15,
16, 17 et 40.
Futuretech
General
Electric (GE)
03
06, 40, 56, 59, 66,
67, 68
SSS
18
18, 40, 48, 54, 59,
60, 62
Hall Mark
40
Sylvania
~
Hitachi
Inkel
15, 18, 50, 59, 69
Symphonic
Tatung
61, 95, 96
45
56, 59, 67, 86
70
06
18
JC Penny
JVC
Techwood
Teknika
TMK
03, 15, 18, 25
18, 40
4. Si le téléviseur s’éteint, cela signifie que le réglage est
KTV
59, 61, 87, 88
03, 15, 40
15
terminé.
~
KEC
Toshiba
Vidtech
19, 57, 63, 71
18
Vous pouvez utiliser les touches TV POWER,
VOLUME, CHANNEL, MENU ainsi que les touches
numériques (0 à 9).
KMC
01, 15, 16, 17, 37, 38,
39, 40, 41, 42, 43, 44
LG (Goldstar)
Luxman
Videch
Wards
yamaha
york
59, 60, 69
15, 17, 18, 40, 48,
54, 60, 64
18
19, 54, 56, 59, 60, 62,
63, 65, 71
15, 17, 18, 48, 54, 59,
60, 62, 72, 89
LXI (Sears)
Magnavox
18
✎
REMARQUE
40
`
La télécommande peut ne pas fonctionner ou
certaines opérations peuvent ne pas être disponibles
sur des téléviseurs de certaines marques.
Par défaut, la télécommande fonctionne sur les
téléviseurs Samsung.
Marantz
Matsui
MGA
Mitsubishi/
MGA
40, 54
yupiteru
Zenith
03
58, 79
01
54
18, 40
Zonda
`
18, 40, 59, 60, 75
Dongyang
03, 54
1ꢂ
Français
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 14
2011-03-05 �� 11:31:05
Connexions
Cette section décrit différentes méthodes de connexion de l’appareil aux autres périphériques externes.
Avant de déplacer ou d'installer l'appareil, assurez-vous de le mettre hors tension et de débrancher le cordon
d'alimentation.
Connexion des enceintes
Position de l’appareil
Placez-le sur un pied, sur la tablette d'un
meuble, ou sous le support du téléviseur.
SW
2,5 à 3 fois la taille de l’écran du téléviseur
Choix de la position d'écoute
La position d'écoute (distance entre l'utilisateur et
le téléviseur) doit être située à environ 2,5 à 3 fois
la taille de l'écran du téléviseur.
Exemple : Téléviseurs 32" : 2 à 2,4 m
Téléviseurs 55" : 3,5 à 4 m
Placez ces enceintes devant votre position d'écoute, face vers l'intérieur (environ
45 degrés) et dans votre direction. Placez-les de façon à ce que les haut-parleurs
Enceintes avant ei
d'aigus soient à la hauteur de vos oreilles. Alignez le devant des enceintes avant
avec le devant de l'enceinte centrale ou légèrement plus en avant.
Il est préférable de l'installer à la même hauteur que les enceintes avant. Vous
pouvez aussi l'installer directement sur ou sous le téléviseur.
Enceinte centrale
f
Placez-les sur les côtés de votre position d'écoute. Si vous manquez d’espace,
placez-les face à face. Placez-les à environ 60 à 90 cm au-dessus de vos
oreilles, face légèrement vers le bas.
Enceintes
Contrairement aux enceintes avant et centrale, les enceintes ambiophoniques
ambiophoniqueshj
*
sont principalement utilisées pour émettre les effets sonores; elles ne
reproduisent pas de son en permanence.
Son emplacement n’est pas d’une importance cruciale. Vous pouvez le placer où
vous voulez.
Caisson de graves
g
!
ATTENTION
`
Ne laissez pas les enfants jouer avec les enceintes ou à proximité. Ils pourraient se blesser en cas de chute
de l’une d’elles.
`
`
Lorsque vous branchez les fils aux enceintes, assurez-vous de respecter les polarités (+/-).
Conservez le caisson de graves hors de portée des enfants afin d'éviter qu'ils ne mettent leurs mains ou des
objets dans l’évent (ouverture) du caisson.
`
Ne suspendez pas le caisson de graves au mur par l’évent (ouverture).
✎
`
REMARQUE
Si vous placez une enceinte près de votre téléviseur, la couleur de l’écran peut s’altérer en raison du champ
magnétique généré par l’enceinte. Dans ce cas, éloignez l’enceinte.
Français
1ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 15
2011-03-05 �� 11:31:05
Connexions
Composants des enceintes
HT-D450
(G)
(D)
(G)
(D)
AVANT
ꢀ
AMBIOPHONIQUE
CENTRALEꢀ
CAISSONꢀDEꢀGRAVES
CÂBLEꢀD’ENCEINTE
Composants des enceintes
Enceintes assemblées
HT-D453
(G) (D)
HT-D453
VIS (5×15) : x2
ꢀ
VIS (4×20) : x8
ꢀ
ENCEINTE CENTRALE
AVANT
ꢀ
CENTRALEꢀ
SOCLEꢀ
(G) (D)
CÂBLEꢀ
D’ENCEINTE
ENCEINTE
AMBIOPHONIQUE
CAISSON DE
GRAVES
ENCEINTE
AVANT
CAISSONꢀDEꢀꢀ
GRAVES
BASEꢀDUꢀSOCLE
AMBIOPHONIQUE
HT-D455
HT-D455
(G) (D)
VIS (5×15) : x4
ꢀ
VIS (4×20) : x16
ꢀ
ENCEINTE CENTRALE
CAISSON DE GRAVES
AVANT
ꢀ
SOCLE
(G) (D)
CENTRALE
ENCEINTE AVANT/
AMBIOPHONIQUE
CAISSONꢀDEꢀGRAVES
CÂBLEꢀD’ENCEINTE
BASEꢀDUꢀSOCLE
AMBIOPHONIQUE
✎
`
REMARQUE
Reportez-vous à la page 17 pour installer les enceintes sur un socle Tallboy.
1ꢄ
Français
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 16
2011-03-05 �� 11:31:27
Installations des enceintes sur le socle Tallboy
* HT-D453 uniquement – Enceintes avant
1
2
4
* HT-D455 uniquement – Enceinte avant/ambiophonique
1. Retournez la base du socle et fixez-la au socle.
Base du
socle
2. Servez-vous d'un tournevis et insérez de petites vis
(4*20, pour la connexion du pied et de la base du pied)
dans le sens des aiguilles d'une montre dans les quatre
Socle
trous marqués, tel qu'indiqué dans l'illustration.
3
Enceinte
Socle
!
ATTENTION : Lorsque vous utilisez un tournevis
dynamométrique, veillez à ne pas appliquer de force
excessive. Vous risqueriez de le faire tourner à vide
et de l'endommager. (tournevis dynamométrique
- sous les 15 kgp/cm)
3. Installez l’enceinte supérieure sur le support assemblé.
4. À l’aide d’un tournevis, insérez une autre grosse vis
(5*15, pour le raccordement de l'enceinte et du pied)
dans le trou situé à l’arrière de l’enceinte et vissez-la
dans le sens des aiguilles d’une montre.
5
5. Voici comment se présente le dispositif après
l’installation de l'enceinte. Suivez ces étapes pour
installer d'autres enceintes.
Connexion des enceintes
1. Appuyez sur la languette de la borne située à l’arrière de l'enceinte.
2. Insérez le fil noir dans la borne noire (–) et le fil rouge dans la borne rouge
(+), puis relâchez la languette.
3. Branchez les fiches de contact situées à l’arrière de l’appareil en faisant
Noir
Rouge
concorder les couleurs des fiches et des prises des enceintes.
Pour le modèle HT-D450
Enceinte centrale
Enceinte avant (D)
Enceinte avant (G)
Enceinte ambiophonique (D)
Enceinte ambiophonique (G)
Caisson de graves
* Reportez-vous à la page 16 pour les enceintes des modèles HT-D453/D455.
Français
1ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 17
2011-03-05 �� 11:31:31
Connexions
Raccordement de la sortie Video Out à votre téléviseur
Sélectionnez l'une des quatre méthodes de connexion à votre téléviseur.
MÉTHODE 3
SCART IN
MÉTHODE 4 (fournie)
Vert
G
D
Blue
T
Rouge
MÉTHODE 2
MÉTHODE 1
MÉTHODE 1 : HDMI
Connectez la prise de sortie HDMI OUT située à l’arrière de l'appareil à la prise d’entrée HDMI IN de votre
téléviseur au moyen du câble HDMI (non fourni).
MÉTHODE 2 : Vidéo composant
Si votre téléviseur est équipé d’entrées Component Video (Vidéo composant), connectez les prises de sortie
COMPONENT OUT (y, PB et PR) situées à l’arrière de l’appareil aux prises d’entrée Vidéo Composant de
votre téléviseur à l’aide d’un câble Vidéo composant (non fourni).
MÉTHODE 3 : Péritel
Se il televisore è dotato di ingresso SCART, collegare il cavo video fornito tra il connettore VIDEO OUT sul
retro del prodotto e il connettore VIDEO sull'adattatore SCART, quindi collegare il connettore dell'adattatore
SCART al connettore SCART IN sul televisore.
MÉTHODE 4 : Vidéo Composite
Connectez la prise de sortie VIDEO OUT située à l’arrière de l'appareil à la prise d’entrée VIDEO IN de votre
téléviseur au moyen du câble vidéo fourni.
1ꢆ
Français
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 18
2011-03-05 �� 11:31:32
✎
REMARQUE
`
Les résolutions disponibles pour la sortie HDMI sont les suivantes : 480p(576p), 720p, 1080i/1080p.
Reportez-vous à la page 23 pour le réglage de la résolution.
`
`
Ce produit fonctionne en mode Balayage entrelacé 480i (576i) pour la sortie composant/composite.
Après avoir terminé les raccordements vidéo, réglez la source d'entrée vidéo du téléviseur pour correspondre
avec le mode de sortie vidéo de votre appareil.
Mettez ce produit sous tension avant de régler la source d’entrée vidéo sur votre téléviseur. Reportez vous
au guide d'utilisation de votre téléviseur pour plus de détails concernant le choix de la source d'entrée vidéo.
! ATTENTION
`
Les signaux vidéo distribués à travers un magnétoscope peuvent être affectés par des systèmes de
protection des droits d'auteur et l'image peut être déformée sur le téléviseur.
FONCTION HDMI
Fonction de détection HDMI automatique
Si vous disposez d'un téléviseur Samsung prenant en charge la fonction CEC, la sortie vidéo du produit basculera
automatiquement en mode HDMI en cas de connexion d’un câble HDMI alors que l’appareil est sous tension.
~
~
HDMI (High Definition Multimedia Interface) (Interface multimédia haute définition)
L'interface HDMI permet la transmission numérique de données vidéo et audio à l'aide d'une prise unique.
Lorsque vous utilisez le HDMI, l'appareil transmet un signal audio et vidéo et affiche une image claire sur un
téléviseur disposant d'une prise d'entrée HDMI.
~
Description du raccordement HDMI
- L'interface HDMI transmet uniquement un signal numérique pur au téléviseur.
- Si votre téléviseur ne prend pas en charge la technologie HDCP (High-bandwidth Digital Content Protection)
(Protection du contenu numérique à large bande passante), des parasites peuvent apparaître à l'écran.
~
~
Qu'est-ce que la technologie HDCP ?
HDCP (Protection du contenu numérique à large bande passante) est un système de protection contre la
copie du contenu DVD transmis par HDMI. Elle offre un lien numérique sécuritaire entre une source vidéo
(ordinateur, DVD, etc.) et un dispositif d'affichage (téléviseur, projecteur, etc.). Le contenu est crypté à la
source pour empêcher les copies non autorisées.
Utilisation de la fonction Anynet+ (HDMI-CEC)
Anynet+ est une fonction qui vous permet de commander les autres appareils Samsung à l’aide de la
télécommande de votre téléviseur Samsung. Vous pouvez utiliser la fonction Anynet + en connectant cet
appareil à un téléviseur SAMSUNG à l’aide d’un câble HDMI. Uniquement disponible pour les téléviseurs
SAMSUNG prenant en charge la fonction Anynet+.)
1. Connectez l'appareil à un téléviseur Samsung à l'aide d'un câble HDMI. (Voir page 18)
2. Réglez la fonction Anynet+ sur votre téléviseur. (Pour de plus amples renseignements, reportez-vous au
manuel d’instructions du téléviseur.)
✎
`
REMARQUE
La fonction Anynet+ prend en charge quelques touches de la télécommande.
`
Cette fonction n'est pas disponible si un câble HDMI ne prend pas en charge le CEC.
`
Certaines résolutions de sortie HDMI ne sont pas compatibles avec certains téléviseurs.
Veuillez vous reporter au manuel d'utilisation de votre téléviseur.
`
Veuillez vérifier le logo
(si votre téléviseur comporte le logo
il prend en charge la fonction Anynet+.)
Français
1ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 19
2011-03-05 �� 11:31:32
Connexions
Connexion de l'antenne FM
Antenne FM (fournie)
SPEAKERS OUT
DIGITAL
AUDIO IN
OPTICAL
SURROUND
SUBWOOFER
SURROUND
1. Connectez l’antenne FM fournie à la prise d'antenne FM.
2. Déplacez lentement le fil de l’antenne jusqu’à ce que vous trouviez un emplacement permettant une
bonne réception. Fixez-le ensuite sur le mur ou sur toute autre surface rigide.
✎
`
REMARQUE
Cet appareil ne capte pas les ondes AM.
ꢀ0
Français
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 20
2011-03-05 �� 11:31:33
Raccordement audio des périphériques
S
Blanc
Rouge
D
Câble audio (non fourni)
Si le périphérique analogique ne
possède qu'une prise de sortie
audio, raccordez-la soit à gauche
ou à droite.
Câble optique
(non fourni)
Décodeur
Magnétoscope
OPTICAL (PRISES OPTIQUES)
AUX
AUX : Raccordement d'un périphérique analogique
Périphériques à signal analogique tels qu’un magnétoscope.
1. Raccordez AUX IN (Audio) situé à l'arrière de l'appareil à la sortie audio du périphérique analogique.
~
Assurez-vous de respecter les couleurs des prises de connexion.
2. Appuyez sur la touche FUNCTION pour sélectionner l'entrée AUX.
~
Le mode change dans l’ordre suivant :
DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM
✎
`
REMARQUE
Vous pouvez également raccorder la prise de sortie vidéo de votre magnétoscope au téléviseur et raccorder
les prises de sortie audio du magnétoscope à cet appareil.
OPTICAL (PRISES OPTIQUES) : Raccordement d’un périphérique numérique
Pour le raccordement de périphériques à signal numérique tels que les décodeurs ou les récepteurs satellites :
1. Raccordez DIGITAL AUDIO IN (OPTICAL) situé à l'arrière de l'appareil à la sortie numérique du
périphérique numérique.
2. Appuyez sur la touche FUNCTION pour sélectionner D.IN
~
Le mode change dans l’ordre suivant :
DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM
Français
ꢀ1
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 21
2011-03-05 �� 11:31:34
Configuration
Avant de commencer (Installation initiale)
Réglage du menu Setup
L'étape pour y accéder peut différer en fonction du
menu sélectionné. GUI (Interface utilisateur graphique)
contenue dans ce manuel peut différer, en fonction de
la version du micrologiciel.
1. Appuyez sur la touche POWER lorsqu'il est
connecté sur le téléviseur pour la première fois.
L'écran Initial setting (Installation initiale) s’affiche.
Initial settings > On-Screen Language
Select a language for the on-screen displays
1
English
한국어
Nederlands
Français
Deutsch
Italiano
3
4
>
Move
"
Select
2
2. Appuyez sur les touches ▲▼ pour sélectionner la
langue souhaitée, puis sur la touche ENTRÉE.
3. Appuyez sur la touche ENTRÉE pour sélectionner la
touche Départ.
TOUCHE MENU : Permet d’afficher le menu
1
d'accueil.
TOUCHE RETURN : Permet de revenir au menu de
configuration.
4. Appuyez sur les touches ▲▼ pour sélectionner le
format d’écran souhaité, puis sur la touche ENTRÉE.
2
3
4
TOUCHE ENTRÉE / DIRECTION
~
Si le câble HDMI est branché au produit, le format
écran n’apparaîtra pas.
Permet de déplacer le curseur et de
sélectionner un élément. Permet de
sélectionner l'élément actuellement sélectionné.
✎ REMARQUE
Permet de confirmer le réglage.
`
Si vous n’avez pas sélectionné de langue préférée dans
TOUCHE EXIT : Permet de quitter le menu de
configuration.
les paramètres initiaux, une fenêtre de sélection de
langue apparaîtra à l’écran lors du prochain démarrage
du produit.
`
La sélection de langue s’applique à l’ensemble des
menus, comme suit : Menu OSD, Menu Disque, Audio,
Sous-titre.
Paramètres
`
`
Si vous revenez à l'écran précédent, appuyez sur la
touche RETURN.
Lorsque vous avez sélectionné une langue de menu,
vous pouvez la changer en appuyant sur la touche
ARRET (@) située sur la télécommande pendant plus de
5 secondes sans disque.
Lorsque l'écran Initial setting (Installation initiale)
n'apparaît pas, reportez-vous à Installation initiale. (voir
page 26).
Function DVD/CD
`
1. Appuyez sur la touche POWER.
2. Appuyez sur les touches ◀▶ pour sélectionner
Paramètres, puis sur la touche ENTRÉE.
3. Appuyez sur les touches ▲▼ pour sélectionner le
menu souhaité, puis sur la touche ENTRÉE.
4. Appuyez sur les touches ▲▼ pour sélectionner le
sous-menu souhaité, puis sur la touche ENTRÉE.
5. Appuyez sur les touches ▲▼ pour sélectionner
l'élément souhaité, puis sur la touche ENTRÉE.
6. Appuyez sur la touche EXIT pour quitter le menu de
configuration.
ꢀꢀ
Français
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 22
2011-03-05 �� 11:31:35
✎
REMARQUE
Affichage
`
La qualité de l’image sera ainsi optimisée en
fonction du contenu (sur le disque, DVD, etc.) que
vous souhaitez lire et de l’appareil ou de votre
téléviseur Samsung compatible BD Wise.
Si vous souhaitez changer la résolution en mode
BD Wise, vous devez régler au préalable le mode
BD sur Off (Désactivé).
BD Wise sera désactivé si l’appareil est connecté
à un dispositif qui ne prend pas en charge BD
Wise.
Vous pouvez configurer diverses options d'affichage
telles que le format d’écran, la résolution, etc.
Format d’écran
En fonction du type de téléviseur que vous possédez,
vous pouvez souhaiter ajuster le réglage de l'écran.
`
`
~
4:3 Recadrage
Format sélectionné lorsque vous
souhaitez voir une vidéo au format 16:9
émise par le DVD sans avoir les barres
noires en haut et en bas, même si vous
avez un téléviseur au format d'écran 4:3
(les parties extrêmes gauche et droite
des images du film seront tronquées).
Résolution
Permet de régler la ré solution de sortie du signal vidéo
HDMI. Le nombre dans 480p(576p), 720p, 1080i et 1080p
indique le nombre de lignes de la vidéo.
Le i et le p indiquent respectivement le balayage entrelacé
et le balayage progressif.
~
~
4:3 Boîte aux lettres
~
~
~
~
~
480p(576p) : génère 480 lignes en vidéo progressive.
720p : génère 720 lignes en vidéo progressive.
1080i : génère 1080 lignes en vidéo entrelacée.
1080p : génère 1080 lignes en vidéo progressive.
BD Wise : Permet de régler automatiquement la
résolution optimale lors de la connexion via HDMI à un
téléviseur avec la fonction BD Wise. (L'élément de menu
BD Wise apparaît uniquement si BD Wise est réglé sur
ON (Oui).)
Format sélectionné lorsque vous
souhaitez visionner un DVD en 16:9 alors
que votre téléviseur dispose d'un écran
4:3. Des barres noires apparaissent en
haut et en bas de l'écran.
16:9 Large
Vous pouvez voir la totalité de l'image
16:9 sur votre téléviseur écran large.
✎
REMARQUE
`
Si Composant ou Composite est connecté, la
résolution prend en charge uniquement 480i(576i).
En fonction du téléviseur, 1080P peut ne pas
apparaître.
✎
REMARQUE
`
`
Lorsque vous utilisez une source HDMI, l'écran est
commuté automatiquement en mode 16:9 Large et le
format d’écran est désactivé.
Format HDMI
`
`
Si un DVD est au format 4:3, vous ne pouvez pas le voir
en écran panoramique.
Vous pouvez optimiser le réglage de la couleur à
partir de la sortie HDMI. Sélectionnez un type de
périphérique connecté.
Les disques DVD étant enregistrés dans divers formats
d'image, ils paraissent différents en fonction du logiciel, du
type de téléviseur et du réglage de son format d’écran.
~
Ecran : sélectionné si le raccordement au moniteur est
effectué via HDMI.
Tv : sélectionné si le raccordement au téléviseur est
effectué via HDMI.
BD Wise
~
(Appareils Samsung uniquement)
BD Wise est la toute dernière fonction d’interconnexion de
Samsung. - Lorsque vous interconnectez les produits
Samsung au moyen de BD-Wise via HDMI, la résolution
optimale se règle automatiquement.
Signal sortie vid.
Les mêmes normes TV ne s’appliquent pas dans tous
les pays.
Vous avez le choix entre NTSC et PAL.
~
Oui : La résolution d'origine du disque DVD sera émise
en direct sur le téléviseur.
~
~
NTSC : Vous pouvez sélectionner le format vidéo NTSC
PAL : Vous pouvez sélectionner le format vidéo PAL
~
Non : La résolution de sortie sera déterminée en
fonction de la résolution précédemment réglée, sans
tenir compte de la résolution du disque.
Français
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 23
2011-03-05 �� 11:31:37
Configuration
Réglage des options Avant/Eq. surround
Audio
`
Vous pouvez choisir entre 0 et -6.
Plus vous vous rapprochez de -6, plus le volume
diminue.
`
Réglage Haut-Parleurs
Taille des enceintes
Réglages des options Centre / Surround / Niv
surround
Vous pouvez régler la taille de l'enceinte du centre, des
enceintes arrière ainsi que la tonalité d’essai dans ce mode.
`
Le niveau de volume peut être ajusté par paliers de
+6dB à –6dB.
`
Plus vous vous rapprochez de +6 dB, plus le
volume augmente. Plus vous vous rapprochez
de -6 dB, plus le volume diminue.
Paramètres
Réglage Haut-Parleurs
Taille haut-parleur
BAL avant
▶
Delai
Delai
Tonalité d'essai
:
Non
Si les enceintes ne peuvent pas être placées à égale
distance par rapport à votre position d’écoute, vous avez la
possibilité de régler le temps de retard des signaux audio
émis depuis les enceintes centrale et ambiophoniques.
Dans ce mode, vous pouvez aussi régler l’option Tonalité
d'essai.
"
Sélect.
Sélect.
'
Retour
Retour
mDéplacer
"
'
~
~
~
Sur les enceintes avant, le mode est réglé sur Petit.
Pour le caisson de graves, le mode est réglé sur Présent.
Sur les enceintes centrale et ambiophoniques, il est
possible de basculer entre les modes Petit ou Aucun.
Réglage du temps de propagation des
enceintes
Lorsque le son ambiophonique 5.1CH est émis, vous
pouvez profiter de la meilleure qualité sonore si la distance
entre vous et chacune des enceintes est identique.
- Petit : sélectionnez cette option lorsque vous
utilisez les enceintes.
- Aucun : sélectionnez cette option lorsque
aucune enceinte n’est connectée.
Étant donné que les sons n’arrivent pas tous
simultanément au point d'écoute en raison de
l’emplacement des enceintes, il est possible de
compenser ce phénomène en ajoutant un effet de retard à
✎
REMARQUE
`
Le mode d'enceinte peut varier en fonction des
réglages Dolby Pro Logic et Stéréo
l’enceinte centrale et aux enceintes ambiophoniques.
BAL avant
Paramètres
Delai
Vous pouvez ajuster la balance et le niveau de chaque enceinte.
Avant
Centre
:
:
00mSEC
10mSEC
Surround
Paramètres
BAL avant
Caisson basses
Tonalité d'essai
:
Non
Équilibre avant
Eq. surround
dB L
dB L
R
R
dB
dB
<
Changer
Déplacer
"
Sélect.
'
Retour
Retour
Niv. centr
dB
dB
dB
m
"
Sélect.
'
Niv surround
Niv. grave
<
Changer
Déplacer
"
Sélect.
'
Retour
Retour
✎
`
REMARQUE
Le menu Temps de propagation sera activé
uniquement lorsque la source 5 canaux +1 est lue.
m
"
Sélect.
'
Appuyez sur les touches ▲▼pour sélectionner et
ajuster l'enceinte souhaitée.
`
Vous ne pouvez pas régler les options Centre et
Surround dans ce mode lorsque la fonction Taille haut-
parleur est spécifiée sur AUCUN.
Appuyez sur les touches ◀▶ pour ajuster les
réglages.
ꢀꢂ
Français
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 24
2011-03-05 �� 11:31:38
Tonalité d'essai
Positionnement idéal de
l'enceinte du centre
Paramètres
Réglage Haut-Parleurs
Taille haut-parleur
BAL avant
Delai
Tonalité d'essai
:
Oui
▶
Emplacement idéal
"
Sélect.
'
Retour
m
Déplacer
"
Sélect.
'
Retour
des enceintes
ambiophoniques
Il est préférable de placer toutes les enceintes dans ce cercle.
Utilisez la tonalité d'essai pour vérifier les
raccordements des enceintes acoustiques.
Df: distance par rapport à l’enceinte avant.
Dc: distance par rapport à l’enceinte du centre.
Ds: Distance depuis les enceintes ambiophoniques
~
Appuyez sur les touches _+ pour sélectionner Oui.
La tonalité d'essai sera émise dans l'ordre vers
Avant gauche ➞ Centre ➞ Avant droite ➞
~
Ambiance droite ➞ Ambiance gauche ➞
Caisson basses.
Réglage de l'enceinte du centre
Si la distance Dc est égale ou supérieure à la distance
Df représentée sur la figure, réglez le mode sur 0 ms.
Sinon, modifiez le réglage en suivant le tableau.
Pour arrêter la tonalité d'essai, appuyez sur la
touche ENTRÉE.
DRC (Compression dynamique)
Distance
Cette fonction équilibre la plage entre les sons les plus
forts et les plus faibles. Vous pouvez utiliser cette
fonction pour bénéficier du son Dolby Digital lorsque
vous visionnez un film à faible volume (ex. : la nuit).
entre Df 0,00m 0,34m 0,68m 1,06m 1,40m 1,76m
et Dc
Temps de
ropagation
00 ms 01 ms 02 ms 03 ms 04 ms 05 ms
~
Vous pouvez sélectionner les valeurs Plein, 6/8,
4/8, 2/8, Non.
Configuration des enceintes ambiophoniques
SyNC. AUDIO
La synchronisation vidéo et audio peut ne pas concorder
avec un téléviseur numérique. Si cela se produit, corrigez
ce décalage pour les synchroniser.
Si la distance Dc est égale ou supérieure à Ds
représentée sur la figure, réglez le mode sur 0 ms.
Sinon, modifiez le réglage en suivant le tableau.
Distance
entre Ds 0,00m 1,06m 2,11m 3,16m 3,62m 5,29m
~
Vous pouvez régler le temps de propagation audio entre
0 ms et 300 ms. Réglez-le dans l'état optimal.
et Dc
Temps de
ropagation
00 ms 03 ms 06 ms 09 ms 12 ms 15 ms
AUDIO HDMI
Les signaux audio transmis par le câble HDMI
peuvent être commutés Oui/Non.
✎
REMARQUE
~
Non : La vidéo est transmise par le câble de
connexion HDMI uniquement, tandis que
l’audio est émis par les enceintes de
l'appareil uniquement.
`
Avec
PL II (Dolby Pro Logic II), le temps de
propagation peut être différent pour chaque
mode.
`
`
Avec le son AC-3 et DTS, le temps de
propagation peut être réglé entre 00 et 15mSEC.
Le canal du centre est ajustable uniquement pour
les disques 5 canaux +1.
~
Oui : Les signaux audio et vidéo sont transmis par
le câble de connexion HDMI, et le signal
audio est émis par les enceintes de votre
téléviseur uniquement.
Français
ꢀꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 25
2011-03-05 �� 11:31:38
Configuration
✎
REMARQUE
Système
`
Le réglage par défaut de cette fonction est HDMI
Audio Off.
Installation initiale
`
`
L’audio HDMI est automatiquement mixé dans les
2 canaux pour les enceintes du téléviseur.
Lorsque l’audio HDMI est réglé sur On (activé), les
formats sonores PL II /DSP EQ /P.BASS ne
fonctionnent pas.
Lorsque l'option AUDIO HDMI est spécifiée sur
« Oui », le volume ne peut être réglé que via la
télécommande du téléviseur.
Utilisez l’option Paramètre initial pour régler la langue et le
format écran.
`
✎
`
REMARQUE
Si le câble HDMI est connecté au produit, le
format du téléviseur n’apparaîtra pas et
l’appareil sera réglé automatiquement en mode
16:9 Panoramique.
EQ utilisateur
Vous pouvez configurer les réglages de l’égaliseur
manuellement selon vos préférences.
Enregistrement DivX(R)
Paramètres
Code d'enregistrement View DivX(R) VOD pour
acheter et lire le contenu d'un DivX(R) VOD.
EQ utilisateur
dB
6
·
·
·
·
✎
REMARQUE
·
·
·
`
Cette option ne sera pas activée si vous
sélectionnez OK. Pour activer cette option,
veuillez activer l’option DivX(R) Désactivation.
Même une fois le système réinitialisé, les
paramètres de Enregistrement DivX ne seront
pas réinitialisés.
·
·
·
·
·
-6
250Hz 600Hz 1kHz
Réinit.
3kHz
6kHz 10kHz 15kHz
a
>
Régler
<
Déplacer
Sélect.
'
Retour
Retour
`
m
Déplacer
"
'
✎
`
REMARQUE
Ceci peut aussi être effectué à l'aide du bouton
DSP/EQ. (voir page .34)
DivX(R) Désactivation
Sélectionnez ceci pour obtenir un nouveau code
d’enregistrement.
Canal retour audio
Vous pouvez apprécier le son du téléviseur via les
enceintes du Home cinéma en utilisant un seul câble
HDMI.
~
Non : Permet de désactiver la fonction Canal
retour audio.
~
Auto : Permet d'écouter le son du téléviseur
depuis les enceintes du Home cinéma à condition
que le téléviseur soit compatible avec la fonction
Canal retour audio.
REMARQUE
✎
`
Lorsque l’option Anynet+(HDMI-CEC) est
spécifiée sur Désac., la fonction Canal retour
audio est indisponible.
`
`
L'utilisation d'un câble HDMI non certifié ARC
(Canal retour audio) peut entraîner des
problèmes d'incompatibilité.
La fonction ARC (Canal retour audio) n'est
disponible qu'en cas de connexion à un
téléviseur compatible ARC.
ꢀꢄ
Français
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 26
2011-03-05 �� 11:31:39
Modification du mot de passe
Langue
Sélectionnez Changer et entrez un mot de passe de 4
chiffres pour régler le verrou parental en utilisant les
touches numériques de la télécommande.
Vous pouvez sélectionner la langue que vous préférez
pour le menu à l'écran, le menu du disque, etc.
Language
OSD
Sélectionnez la langue pour les
affichages à l'écran.
Sélectionnez la langue pour les
affichages du menu du disque.
Sélectionnez la langue audio du
disque.
Paramètres
Affichage
Audio
Class. parental
Mot de passe
: Non
Menu
Disque
: Changer
▶
Système
Langue
Sécurité
Assistance
Audio
Sélectionnez la langue pour les sous-
titres du disque.
Sous-titres
m
Déplacer
"
Sélect.
'
Retour
a Pour sélectionner une autre langue, sélectionnez
OTHERS du menu du disque, audio et sous-
titres, et entrez le code de la langue de votre pays
(voir page 38).
Si vous oubliez votre mot de passe
1. Retirez le disque.
a Vous ne pouvez pas sélectionner OTHERS
2. Appuyez pendant 5 secondes ou plus sur la
touche ARRET (@) située sur la télécommande.
Tous les réglages seront ramenés aux réglages
d'usine.
(AUTRES)dans le menu de la langue OSD.
✎
`
REMARQUE
La langue sélectionnée apparaîtra uniquement
si elle est prise en charge par le disque.
Assistance
Sécurité
Informations sur le produit
La fonction de verrou parental agit en liaison avec les
DVD auxquels ont été attribué un niveau qui vous aide à
contrôler les types de DVD que regarde votre famille.
Il y a jusqu'à 8 niveaux d’évaluation sur un disque.
Indiquez les informations relatives au produit, telles
que le code du modèle, la version du logiciel, etc.
Class. parental
Sélectionnez le niveau d’évaluation que vous souhaitez
régler. Un numéro élevé indique que le programme est
destiné uniquement aux adultes. Par exemple, si vous
sélectionnez jusqu'au niveau 6, les disques contenant
le niveau 7, 8 ne seront pas lus.
Entrez le mot de passe, puis appuyez sur le bouton
ENTRÉE.
- Par défaut, le mot de passe est réglé sur « 0000 ».
- Une fois la configuration terminée, le système revient
sur l’écran précédent.
Français
ꢀꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 27
2011-03-05 �� 11:31:39
Fonctions de base
Lecture d’un disque
Lecture de CD audio (CD-DA)/MP3/WMA
1. Appuyez sur la touche OUVERTURE/
FERMETURE (^).
BA
2. Déposez avec précaution le disque sur le
plateau, avec l’étiquette du disque sur le
dessus.
PLAGES 01
1/17
3. Appuyez sur le bouton OUVERTURE/
FERMETURE (^) pour ouvrir le tiroir du disque.
✎
`
REMARQUE
0:15
/
3:59
Fonction Reprise. Lorsque vous arrêtez la lecture
d'un disque, l'appareil garde en mémoire où vous
l'avez arrêté, ainsi lorsque vous appuyez sur la
touche LECTURE à nouveau, il démarre là où la
lecture a été interrompue. (Cette fonction ne
concerne que les DVD)
Function DVD/CD
Repeat Mode Lect.
1. Insérez un CD audio (CD-DA) ou un disque MP3
dans le tiroir du disque.
Appuyez deux fois sur la touche ARRET pendant
la lecture pour désactiver la fonction Reprise.
~
Pour un CD audio, la première piste sera lue
automatiquement.
- Appuyez sur les touches [] pour
revenir à la piste précédente/suivante.
Pour un disque MP3/WMA, appuyez sur les
touches _+ pour sélectionner Musique,
puis appuyez sur la touche ENTRÉE.
- Appuyez sur les touches ▲▼◀▶ pour
sélectionner l'élément souhaité, puis sur la
touche ENTRÉE.
- Appuyez sur les touches () pour
revenir aux pages précédentes/suivantes.
`
Si aucune touche n'est actionnée sur l'appareil ou
sur la télécommande pendant plus de 3 minutes
lorsque l'appareil est en mode Pause, il passera
en mode ARRET.
~
`
`
L'écran initial peut apparaître différent, en fonction
du contenu du disque.
Les disques piratés ne fonctionnent pas dans cet
appareil car ils violent les recommandations du
CSS (Content Scrambling System : un système
de protection contre la copie).
2. Appuyez sur la touche ARRET (@) pour mettre fin à
la lecture.
a
apparaît lorsque vous appuyez sur une
touche non valide.
✎
REMARQUE
Certains CD MP3/WMA peuvent ne pas être lus, en
fonction du mode d'enregistrement.
Le tableau du contenu d'un CD MP3 varie en
fonction du format de la piste MP3/WMA
enregistrée sur le disque.
`
Fonction économiseur d'écran TV/
Economiseur d'énergie
`
`
~
Si aucun bouton n’est utilisé pendant plus de 5
minutes en mode Arrêt ou Lecture, l’économiseur
d’écran sera activé.
Les fichiers WMA-DRM ne sont pas lus.
~
Si le produit reste en mode d’écran de veille
pendant plus de 20 minutes, le courant sera
automatiquement coupé. (Sauf durant la lecture
d’un fichier musical)
ꢀꢆ
Français
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 28
2011-03-05 �� 11:31:39
Lecture de fichiers JPEG
Utilisation de la fonction de lecture
Les images capturées avec un appareil photo
numérique ou un caméscope, ou les fichiers JPEG sur
un ordinateur peuvent être enregistrés sur un CD et
ensuite lus avec cet appareil.
Recherche avant/arrière
dBAD
1. Insérez un disque JPEG dans le tiroir disque.
Appuyez sur les touches () pour la fonction
2. Appuyez sur les touches ◀▶ pour sélectionner
Recherche.
les Photos, puis sur la touche ENTRÉE.
3. Appuyez sur les touches ▲▼ pour sélectionner
( 1 ➞ ( 2 ➞ ( 3 ➞ ( 4
) 1 ➞ ) 2 ➞ ) 3 ➞ ) 4
le dossier que vous souhaitez lire, puis sur la
touche ENTRÉE
.
4. Appuyez sur les touches ▲▼ pour sélectionner
les photos que vous souhaitez visualiser, puis
sur la touche ENTRÉE.
✎
REMARQUE
Aucun son ne retentit en mode recherche.
`
~
~
~
Le fichier sélectionné sera lu et le diaporama
`
La recherche en lecture produit du son
uniquement lorsqu’elle est effectuée aux vitesses
)1 et )2.
démarrera.
Pour arrêter le diaporama, appuyez sur la
touche PAUSE (#).
Vous pouvez afficher le fichier précédent/
suivant en appuyant sur les boutons ◀,▶ en
mode diaporama.
`
Cette fonction est uniquement disponible pour le
format CD-DA.
Saut de scènes/chansons
ROOT
JPEG 1
JPEG 2
JPEG 3
dBAD
Appuyez sur les touches [].
~
Chaque fois que la touche est pressée pendant la
lecture, le chapitre, la piste ou le répertoire (fichier)
précédent(e) ou suivant(e) sera lu(e).
642 X 352
2010/01/01
Function DVD/CD
Page
Retour
~
Vous ne pouvez pas sauter des chapitres
consécutifs.
Fonction rotation
Lecture en vitesse lente
G
dD
Appuyez sur la touche VERTE (B) ou JAUNE (C) pendant
le mode PAUSE.
Appuyez sur la touche PAUSE (#) puis sur la touche
) pour une lecture lente.
~
~
Touche VERTE (B) : Permet de pivoter de 90°
dans le sens antihoraire.
ꢀ
d
D
Touche JAUNE (C) : Permet de pivoter de 90° dans
le sens horaire.
*1 ➞*2 ➞*3
✎
`
REMARQUE
Les résolutions maximales prises en charge par
l'appareil sont 5120 x 3480 (ou 19.0 MPixel) pour
les fichiers standard JPEG et 2048 x 1536 (ou 3.0
MPixel) pour les fichiers d'images progressives.
✎
REMARQUE
`
Aucun son n'est audible pendant la lecture lente.
La marche arrière en ralenti ne fonctionne pas.
`
Français
ꢀꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 29
2011-03-05 �� 11:31:39
Fonctions de base
Lecture en mode pas à pas
Utilisation du menu des titres
dD
d
Pour les DVD contenant plusieurs titres, vous
pouvez visualiser le titre de chaque film.
1. En cours de lecture, appuyez sur la
touche TITLE MENU de la
télécommande.
2. Appuyez sur les touches ▲▼◀▶
pour effectuer la sélection souhaitée,
puis sur la touche ENTRÉE.
Appuyez sur le bouton PAUSE à plusieurs reprises.
~
La vidéo avance image par image chaque fois que
vous appuyez sur cette touche en cours de
lecture.
TITLE MENU
✎
`
REMARQUE
Aucun son n'est audible pendant la lecture en
mode pas à pas.
✎
`
REMARQUE
Fonction saut de 5 minutes
Selon le disque, les éléments de configuration du menu
peuvent varier et ce menu peut ne pas être disponible.
D
Lecture répétée
Appuyez sur la touche ◀,▶ en cours de lecture.
~
La lecture saute de 5 minutes en avant lorsque
vous appuyez sur la touche ▶.
dBAD
Répétition des DVD/DivX
~
La lecture saute de 5 minutes en arrière lorsque
vous appuyez sur la touche ◀.
✎
`
REMARQUE
Vous pouvez répéter le titre, le chapitre ou la section
(répétition A-B) d'un disque DVD/DivX.
Cette fonction est uniquement disponible pour les
formats DivX contenant des informations d’heure.
Répétition
Non
Utilisation du menu du disque
d
Vous pouvez visualiser les menus pour la langue
audio, la langue des sous-titres, le profil, etc.
REPEAT
1. En cours de lecture d'un disque DVD/
DivX, appuyez sur la touche REPEAT
de la télécommande.
DISC MENU
1. En cours de lecture, appuyez sur la
touche DISC MENU de la
télécommande.
2. Appuyez sur les touches ▲▼◀▶
pour effectuer la sélection souhaitée,
puis sur la touche ENTRÉE.
2. Appuyez sur les touches ▲▼ pour
sélectionner le mode de répétition souhaité, puis
sur la touche ENTRÉE.
3. Appuyez sur les touches ▲▼ pour sélectionner
Non pour revenir à la lecture normale, puis sur
la touche ENTRÉE.
✎
`
REMARQUE
Selon le disque, les éléments de configuration du
menu peuvent varier et ce menu peut ne pas être
disponible.
Titre ➞ Chapitre ➞ A - ➞ Non
Z
D
Titre
➞
Dossier
➞
Tous
➞
Non
ꢁ0
Français
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 30
2011-03-05 �� 11:31:40
Répétition des disques CD/MP3
Affichage des informations du disque
1. Pendant la lecture d'un CD/ MP3, appuyez de
façon répétée sur la touche REPEAT pour
sélectionner le mode de répétition que vous
souhaitez.
d
1/1
2/20
;
;
;
;
0:05:21
1/1 EN AC3 5.1
1/1 EN
1/1
B
A
(Répéter Non ; Répéter disque ; Répéter tout
; Aléatoire ; Répéter Section A-B)
Changer
Sélect.
;
;
;
;
(
Répéter Non ; Répéter piste ; Rép répétition
(Répertoire répétition) ; Répéter tout ;
Aléatoire )
D
1/6
Lecture répétée de la section A-B
1/1
1/1 EN
Changer
Sélect.
dB
Vous pouvez relire à plusieurs reprises une section
spéciale d’un DVD ou d’un CD.
1. En cours de lecture d'un disque DVD ou CD,
appuyez sur la touche REPEAT de la
télécommande.
1. En cours de lecture, appuyez sur la
TOOLS
2. Pour les DVD, appuyez sur les touches ▲▼
pour sélectionner A-.
touche TOOLS de la télécommande.
2. Appuyez sur les touches ▲▼pour
Pour les CD appuyez de façon répétée sur la
sélectionner l’élément souhaité.
touche REPEAT jusqu'à ce que
apparaisse.
3. Appuyez sur les touches ◀▶ pour réaliser le
changement de configuration souhaitée, puis
sur la touche ENTRÉE.
3. Appuyez sur la touche ENTRÉE au point où
vous souhaitez que la répétition de lecture
débute (A).
- Vous pouvez utiliser les touches numériques
de la télécommande pour contrôler certains
éléments.
4. Appuyez sur la touche ENTRÉE au point où
vous souhaitez que la répétition de lecture
s'arrête (B).
4. Pour que les informations du disque
disparaissent, appuyez de nouveau sur la
touche TOOLS.
5. Pour revenir à une lecture normale,
Pour les DVD, appuyez sur les touches ▲▼ pour
sélectionner Non. Pour les CD, appuyez sur la
✎
REMARQUE
touche REPEAT pour sélectionner
.
`
Si vous lisez le contenu du menu tools, selon le disque,
certaines fonctions peuvent ne pas être activées.
Vous pouvez également sélectionner DTS, Dolby Digital
ou Pro Logic, en fonction du disque.
Certains menus tools peuvent différer en fonction des
disques et des fichiers.
✎
REMARQUE
`
`
`
La fonction de répétition de la section A-B ne
prend pas en charge les disques DivX, MP3 ou
JPEG.
Français
ꢁ1
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 31
2011-03-05 �� 11:31:43
Fonctions de base
3. Appuyez sur les boutons _+ pour sélectionner
Menu OUTILS
la langue de sous-titres souhaitée.
`
`
`
Titre (
) : pour accéder au titre désiré
~
Selon le nombre de langues que le DVD
comprend, vous sélectionnez une langue de
sous-titres différente à chaque fois que vous
appuyez sur le bouton.
lorsque le disque en comporte plusieurs.
¨Par exemple, s'il y a plusieurs films sur un
DVD, chaque film sera identifié par un titre.
Chapitre (
) : la plupart des disques DVD
sont enregistrés en chapitres ainsi vous
pouvez trouver rapidement un chapitre
spécifique.
✎REMARQUE
`
Selon le type de disque, certaines fonctions des
langues de sous-titrage et audio peuvent ne pas
être disponibles.
Durée de lecture (
) : permet la lecture
d'un film à partir de l'heure désirée. Vous
devez entrer l'heure de départ en tant que
référence.
La fonction de recherche d'heure n'est pas
prise en charge par certains disques.
Fonction de sous-titrage
D
`
`
Audio (
): se rapporte à la langue de la
~
~
Vous devez être familier avec l’extraction vidéo et
piste sonore du film. Un disque DVD peut
contenir jusqu’à 8 langues audio.
la mise en forme des données pour pouvoir utiliser
correctement cette fonction.
Sous-titre (
): se rapporte aux langues
Pour utiliser la fonction de sous-titrage, enregistrer
le fichier des sous-titres (*.smi) sous le même nom
que le fichier DivX (*.avi), dans le même dossier.
Example. Racine Samsung_007CD1.avi
Samsung_007CD1.smi
des sous-titres disponibles sur le disque.
Vous pouvez choisir les langues des sous-
titres ou, si vous préférez, les effacer de
l'écran. Un disque DVD peut contenir jusqu’à
32 langues de sous-titres.
~
~
Le nom de fichier peut contenir jusqu'à 100
caractères alphanumériques ou 50 caractères
asiatiques (caractères à 2 octets tels le Coréen et
le chinois).
Les sous-titres des fichiers DivX *.smi, *.sub, *.srt
au-delà de 148 Ko ne sont pas pris en charge.
`
Angle (
): lorsqu’un DVD propose
plusieurs angles de vue pour une scène
donnée, vous pouvez utiliser la fonction
Angle.
Sélection de la langue Audio
dD
Fonction Angle
1. Appuyez sur la touche TOOLS.
2. Appuyez sur les boutons ▲▼ pour sélectionner
d
l'affichage AUDIO (
).
Cette fonction vous permet de visualiser une même
scène sous différents angles.
3. Appuyez sur les boutons _+ pour sélectionner
la langue audio souhaitée.
~
Selon le nombre de langues que le DVD comprend,
vous sélectionnez une langue audio différente à
chaque fois que vous appuyez sur le bouton.
1. Appuyez sur la touche TOOLS.
2. Appuyez sur les touches ▲▼ pour sélectionner
l'affichage ANGLE (
).
3. Appuyez sur les boutons _+ pour sélectionner
Sélection de la langue des sous-titres
l’angle souhaité.
dD
2. Appuyez sur les boutons ▲▼ pour sélectionner
✎REMARQUE
`
La fonction Angle ne prend en charge que les
disques sur lesquels plusieurs angles ont été
enregistrés.
1. Appuyez sur la touche TOOLS .
l'affichage Sous-titre
(
).
ꢁꢀ
Français
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 32
2011-03-05 �� 11:31:43
SLEEP
GIGA
Vous pouvez définir l’heure à laquelle le Home
cinéma doit automatiquement s’arrêter.
La fonction GIGA Sound amplifie les graves et les améliore
deux fois plus afin de vous permettre d’apprécier la
puissance du son réel. La fonction GIGA Sound s’applique
uniquement au caisson de graves.
Appuyez sur le bouton SLEEP.
~
À chaque fois que vous appuyez sur ce
bouton, la sélection change comme suit :
Appuyez sur le bouton GIGA.
SLP 10
SLP 90
SLP 20
SLP 30
SLP 60
OFF.
✎
REMARQUE
SLP 120
SLP 150
`
Si la fonction GIGA Sound est spécifiée sur « OUI »,
d’autres effets liés au champ acoustique ne seront
pas appliqués.
DIMMER
`
`
Si la fonction DOLBy PLII est spécifiée sur « OUI »,
Vous pouvez régler la luminosité de
l'affichage sur l’unité principale.
l’effet lié à GIGA Sound ne sera pas appliqué.
La fonction GIGA Sound (GIGA Sound) fonctionne
uniquement en mode LPCM à 2 canaux.
Appuyez sur le bouton DIMMER.
Mode sonore
S.VOL (CONT. DE VOL.
INTELLIGENT)
P.BASS
L’option P.BASS amplifie les basses afin d’améliorer les
fréquences de graves.
Cette option permet de régler et de stabiliser le
niveau du volume afin d’éviter les changements de
niveau importants lorsque vous changez de chaîne
La fonction OPTIMISEUR MP3 offre une meilleure qualité de
son grâce à la mise à l’échelle de la fréquence
d’échantillonnage.
ou pendant un changement de scène.
S . VOL
Appuyez sur la touche S.VOL.
Appuyez sur la touche P.BASS.
~
Chaque fois que vous appuyez sur
cette touche, la sélection change dans
l’ordre suivant :
Source à modulation
POWER BASS ON
➞
par impulsion et
codage linéaire
(LPCM) à 2 canaux
SMART VOLUME ON SMART VOLUME OFF
POWER BASS OFF
MP3 ENHANCE ON ➞
POWER BASS ON ➞
POWER BASS OFF
Fichier MP3
S/W LEVEL
Vous pouvez également appuyez sur le bouton S/W
LEVEL de la télécommande et utiliser les boutons _
ou + pour régler le niveau du caisson de graves.
✎REMARQUE
`
La fonction P.BASS n’est compatible qu’avec les
sources à modulation par impulsion et codage linéaire
(LPCM) à deux canaux (MP3, DivX, CD et WMA).
Appuyez sur le bouton S/W LEVEL.
`
La fonction P.BASS n’est pas compatible avec les
modes GIGA SOUND ou Dolby Pro Logic ll.
Si vous appuyez sur la touche P.BASS en mode DSP/EQ, ce
mode se désactive automatiquement et P. BASS s’active.
La fonction d’enrichissement MP3 n'est disponible
qu'avec un fichier MP3.
`
Français
ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 33
2011-03-05 �� 11:31:43
Fonctions de base
DSP (Traitement du signal
numérique)/EQ
Mode Dolby Pro Logic ll
Vous pouvez sélectionner le mode audio Dolby Pro
Logic II souhaité.
~
~
DSP (Traitement du signal numérique) : Les modes
DSP ont été définis pour simuler différents
environnements acoustiques.
EQ : Vous pouvez sélectionner POPS, JAZZ, ROCK
ou USER afin d’optimiser le son en fonction du genre
de musique que vous écoutez.
Appuyez sur la touche
PL II.
DSP /EQ
Lorsque vous écoutez de la musique,
vous pouvez tester les effets sonores
comme si vous écoutiez la
MUSIC
MOVIE
Appuyez sur la touche DSP/EQ.
performance réelle.
Assure un son plus réel à la bande son
du film.
POPS,
JAZZ,
ROCK
Selon le type de musique, vous pouvez
sélectionner POPS, JAZZ et ROCK.
Vous pouvez écouter une source
sonore à 2 canaux en un son surround
5.1 avec toutes les enceintes activées.
- Une ou plusieurs enceinte(s) risquent
de ne pas émettre de son, selon le
signal d’entrée.
Vous pouvez écouter la musique tout en
procédant au réglage de l’option « EQ:
USER (EQ : UTIL) ».
PROLOG
Si vous appuyez sur ENTRÉE sous le
menu « EQ:USER (EQ : UTIL) », une
fenêtre s'affichera vous autorisant à
changer les paramètres EQ selon vos
préférences.
USER
Vous bénéficierez d'un son
ambiophonique multi-canaux.
MATRIX
STEREO
A sélectionner pour écouter le son des
enceintes gauche et droite avant et du
caisson de basses uniquement.
Procure la sensation de présence dans
un studio.
STUDIO
CLUB
Simule le son d'un club de danse avec
le renforcement des notes de basse.
✎
REMARQUE
Offre des voix nettes comme dans une
salle de concert.
`
Si vous sélectionnez le mode Pro Logic II,
connectez votre périphérique aux prises
d'entrée d’audio AUDIO INPUT (L et R) de
l’appareil. Si vous ne connectez qu'une seule
entrée (L ou R), l'écoute du son
ambiophonique est impossible.
La fonction Pro Logic II n’est disponible qu’en
mode Stéréo.
HALL
Procure la sensation d'un film de
cinéma.
MOVIE
CHURCH
OFF
Procure le sentiment d'être dans une
grande église.
`
`
A sélectionner pour l'écoute normale.
La fonction Pro Logic II est indisponible lors de
la lecture du signal AC3 en mode 2,1 canaux.
✎
`
REMARQUE
La fonction DSP/EQ n’est disponible qu’en
mode stéréo.
`
La fonction DSP/EQ est indisponible lors de la
lecture du signal AC3 en mode 2,1 canaux.
ꢁꢂ
Français
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 34
2011-03-05 �� 11:31:44
5. Appuyez à nouveau sur la touche TUNER
Écoute de la radio
MEMORy.
~
Appuyez sur la touche TUNER MEMORy avant
que le nombre ne disparaisse de l’écran.
Utilisation des touches de la télécommande
~
Le nombre disparaît de l’écran et la station est
prise en mémoire.
1. Appuyez sur la touche FUNCTION pour
sélectionner FM.
6. Pour prérégler une autre station, répétez les étapes
2. Sélectionnez une station.
2 à 5.
~
Syntonisation préréglée 1 : Vous devez d’abord
ajouter une fréquence de votre choix à titre de
préréglage. Appuyez sur le bouton ARRÊT (@)
pour sélectionner PRÉRÉGLÉ puis appuyez sur
le bouton TUNING/CHꢀ(
) afin de choisir une
station préréglée.
~
~
Syntonisation manuelle : Appuyez sur le bouton
ARRÊT (@) pour sélectionner MANUEL puis appuyez
sur le bouton TUNING/CHꢀ(
) afin de syntoniser
une fréquence supérieure ou inférieure.
Automatic Tuning : Appuyez sur le bouton ARRÊT
(@) pour sélectionner MANUEL puis appuyez sur le
bouton TUNING/CHꢀ(
) enfoncé afin de
rechercher la bande automatiquement.
Réglage Mono/Stéréo
Appuyez sur la touche MO/ST.
~
Chaque fois que vous appuyez sur cette
touche, le son est commuté entre STEREO et
MONO.
~
Dans une zone de faible réception, sélectionnez MONO
pour une réception claire sans interférence.
Préréglage des stations
Exemple : Préréglage de FM 89.10 dans la mémoire
1. Appuyez sur la touche FUNCTION pour sélectionner FM.
2. Appuyez sur la touche TUNING/CH (
) pour
sélectionner <89.10>.
3. Appuyez sur la touche TUNER
MEMORy.
~
Le nombre clignote à l'écran.
4. Appuyez sur les touches TUNING/CH
) et sélectionnez le nombre
préréglé.
Vous pouvez sélectionner entre 1 et 15
présélections.
(
~
Français
ꢁꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 35
2011-03-05 �� 11:31:46
Fonctions avancées
Fonction USB
Enregistrement sur périphérique USB
Lors de la lecture d'un CD audio à l’aide de la fonction
USB Recording (Enregistrement sur périphérique USB)
ou de l’audition de la radio FM ou de la réception d’une
source audio à partir d’un appareil externe, vous pouvez
enregistrer la source audio dans la mémoire USB.
Ex) Enregistrement des contenus audio d’un CD
audio sur un périphérique USB
1. Connectez le périphérique USB au produit.
2. Insérez le CD audio dans le tiroir du lecteur.
3. Appuyez sur le bouton USB REC de la
télécommande.
Lecture des fichiers multimédia
en utilisant
Vous pourrez profiter de la plupart des fichiers
multimédia tels que photos, films et musique
enregistrés sur un lecteur MP3, une clé USB ou un
caméscope en haute qualité vidéo avec le son 5
canaux +1 en raccordant le périphérique de
stockage au port USB de l'appareil.
~
Pour commencer l’extraction de la piste
actuelle, appuyez sur le bouton USB REC
de la télécommande tandis que le système
lit une piste ou s’est arrêté momentanément.
Pour effectuer l’enregistrement de tout le CD, appuyez
sur le bouton USB REC de la télécommande et
maintenez-le enfoncé.
~
- Le message « FULL CD RIPPING » apparaît à l’écran
et l’enregistrement commence.
4. Appuyez sur le bouton ARRÊT (@) pour mettre fin à
l’enregistrement.
1. Branchez le périphérique USB sur le port USB
~
À la fin de l’enregistrement du CD sur le périphérique
USB, vous trouverez un nouveau dossier stocké sur le
lecteur USB intitulé « RECORDING ». Le contenu est
sauvegardé dans le dossier au format MP3.
situé sur l'avant de l'appareil.
2. Appuyez sur la touche FUNCTION pour
sélectionner USB.
~
À la fin de l’enregistrement de la radio FM ou de la
source AUX sur le périphérique USB, vous trouverez un
nouveau dossier stocké sur le lecteur USB intitulé «
TUNER RECORDING » ou « AUX RECORDING ». Le
contenu est sauvegardé dans le dossier au format MP3.
~
USB apparaît brièvement à l’écran de
l’afficheur.
3. Appuyez sur les boutons _+ pour sélectionner
les options Vidéos, Photos ou Musique.
- Sélectionnez un fichier à lire.
✎
REMARQUE
`
Ne déconnectez pas le périphérique USB ou ne débranchez pas
le câble d’alimentation pendant l’enregistrement sur le
périphérique USB. Cela pourrait endommager les données.
Pour arrêter l’enregistrement sur le périphérique USB, appuyez
sur le bouton ARRÊT et déconnectez le périphérique USB après
que le système ait complètement arrêté la lecture du CD.
Si vous déconnectez le périphérique USB pendant
l’enregistrement, le système s’éteindra et vous ne pourrez pas
supprimer le fichier enregistré.
Retrait sécuritaire d’un dispositif USB
Afin d’éviter d’endommager les données stockées
sur le périphérique USB, retirez ce dernier avec
précaution avant de débrancher le câble USB.
~
Appuyez sur la touche JAUNE (C).
- REMOVE s’affiche à l’écran.
`
`
~
Retirez le câble USB.
Si vous connectez le périphérique USB au système pendant la
lecture d’un CD, le système suspendra la lecture pour la
reprendre ultérieurement.
✎
`
REMARQUE
Pour écouter vos fichiers musicaux avec un son
5 canaux +1, vous devez régler le mode Dolby
Pro Logic II sur Matrix. (Voir page 34)
`
`
Les CD au format DTS ne peuvent pas être enregistrés.
Si la durée de l’enregistrement est inférieure à 5 secondes, il est
possible que le fichier d’enregistrement ne puisse pas être créé.
L’enregistrement USB fonctionne uniquement lorsque le
périphérique est formaté selon le système de fichiers FAT. (Le
format de fichier NTFS n’est pas pris en charge.)
`
`
Retirez lentement le câble USB du port USB.
Dans le cas contraire, vous pourriez
endommager le port USB.
`
`
Le signal audio n’est pas émis durant l’enregistrement du CD
sur le périphérique USB.
Lorsque l’option AUDIO HDMI est réglée sur Act., la fonction
Enregistrement sur périphérique USB n’est pas prise en charge.
ꢁꢄ
Français
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 36
2011-03-05 �� 11:31:46
Autres informations
Dépannage
Reportez-vous au tableau ci-dessous lorsque l'appareil ne fonctionne pas correctement. Si le problème que
vous constatez ne figure pas dans la liste ci-dessous ou si les instructions ci-dessous ne vous aident pas,
mettez l'appareil hors tension, déconnectez le cordon d'alimentation et contactez le distributeur le plus
proche ou le centre de services Samsung Electronics.
Problème
Vérification/Solution
Il m’est impossible d’éjecter le
disque.
• Le cordon d'alimentation est-il correctement branché dans la prise ?
• Coupez l'alimentation puis rétablissez-la.
La lecture ne démarre pas.
• Vérifiez le code régional du DVD.
Les disques DVD achetés à l’étranger sont parfois incompatibles.
• Il m’est impossible de lire les CD-ROM et les DVD-ROM sur l'appareil.
• Assurez-vous que le niveau d'évaluation est correct.
• Utilisez-vous un disque déformé ou un disque ayant subi des rayures en surface ?
• Nettoyez le disque.
La lecture ne démarre pas
immédiatement lorsque les touches
Lecture/Pause sont actionnées.
Absence de son.
• Aucun son n’est produit pendant la lecture accélérée, la lecture lente ou la lecture
image par image.
• Les enceintes sont-elles raccordées correctement ? La configuration des enceintes
a-t-elle été correctement personnalisée ?
• Le disque a-t-il été sérieusement endommagé ?
Le son n'est généré que par
certaines enceintes, pas par les six.
• Sur certains disques DVD, le son est uniquement généré par les enceintes avant.
• Vérifiez si les enceintes sont correctement connectées.
• Réglez le volume.
• Pendant l'écoute d'un CD, de la radio ou du téléviseur, le son est uniquement
généré par les enceintes avant. Sélectionnez "PROLOG" en appuyant sur
(Dolby Pro Logic II) situé sur la télécommande pour utiliser les six enceintes.
• Est-ce que le disque comporte la mention "Dolby Digital 5.1 CH" ? Le son
ambiophonique Dolby numérique 5 canaux + 1 n'est reproduit que si le disque a été
enregistré en conséquence.
PL II
Le son ambiophonique Dolby
numérique 5 canaux + 1 n'est pas
reproduit.
• Selon l'écran d'information, la langue audio est-elle correctement réglée sur Dolby
Digital 5.1-CH ?
La télécommande ne fonctionne pas.
• La télécommande est-elle utilisée dans les limites de sa portée en matière d’angle et de distance ?
• Les piles sont-elles épuisées ?
• Avez-vous sélectionné le mode approprié (RECEIVER DVD/TV)?
• Le disque tourne mais aucune
image n'est produite.
• La qualité de l'image est
médiocre et l'image tremble.
• Le téléviseur est-il sous tension ?
• Les câbles de la vidéo sont-ils branchés correctement ?
• Le disque est-il sale ou endommagé ?
• Si le disque a été médiocrement créé, il peut ne pas être lisible.
La langue audio et les sous-titres ne
fonctionnent pas.
•
La langue audio et les sous-titres ne fonctionnent que si le disque les contient.
L'écran du menu Disc/Title n'apparaît • Utilisez-vous un disque qui ne comporte pas de menu ?
pas même lorsque la fonction Disc/
Title est sélectionnée.
Le format d'écran ne peut pas être
modifié.
• La lecture des DVD 16:9 est possible en mode 16:9 WIDE (16:9 Large), 4:3 LETTER
BOX (4/3 Boîte aux lettres) ou 4:3 PAN SCAN (4:3 Panoramique/Balayage) ; en
revanche, les DVD 4:3 peuvent être lus au format 4:3 uniquement. Reportez vous à
la pochette du disque DVD puis sélectionnez la fonction appropriée.
Français
ꢁꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 37
2011-03-05 �� 11:31:47
Autres informations
Problème
Vérification/Solution
• L'appareil ne fonctionne pas.
(Exemple : Le courant se coupe,
la touche du panneau avant ne
fonctionne pas ou un bruit
• Appuyez pendant 5 secondes ou plus sur la touche ARRÊT (@) située sur la télécommande en
l’absence de disque (fonction de réinitialisation).
L'utilisation de la fonction RESET (REINITIALISATION) efface tous les réglages enregistrés.
N'utilisez cette fonction que lorsque cela s'avère nécessaire.
étrange se fait entendre.)
• L'appareil ne fonctionne pas
normalement.
Le mot de passe du niveau
d'évaluation a été oublié.
• Tandis que le message « NO DISC » (PAS DE DISQUE) est affiché à l’écran de l'appareil, maintenez
la touche ARRÊT (@) enfoncée pendant plus de 5 secondes. Le mot « INIT (INITIAL) » s’affiche et
tous les réglages reviennent aux valeurs par défaut.
Appuyez ensuite sur la touche POWER.
L'utilisation de la fonction RESET (REINITIALISATION) efface tous les réglages enregistrés.
N'utilisez cette fonction que lorsque cela s'avère nécessaire.
La réception des émissions de
radio est impossible.
• L’antenne est-elle connectée correctement ?
• Si le signal d’entrée de l’antenne est faible, installez une antenne FM extérieure à un endroit
où la réception sera de meilleure qualité.
Liste des codes de langue
Entrez le numéro de code approprié pour OTHERS (Autres) du menu du disque, audio et sous-titres. (Voir page 27)
Code
Langue
Code
Langue
Code
Langue
Code
Langue
Code
Langue
Code
Langue
1027
1028
1032
1039
1044
1045
1051
Afar
1142
1144
1145
1149
1150
1151
1157
Greek
English
1239
1245
1248
1253
1254
1257
1261
Interlingue
Inupiak
1345
1347
1349
1350
1352
1353
1356
Malagasy
Maori
1482
1483
1489
1491
1495
1498
1501
Kirundi
Romanian
Russian
1527
1528
1529
1531
1532
1534
1535
Tajik
Thai
Abkhazian
Afrikaans
Amharic
Arabic
Esperanto
Spanish
Estonian
Basque
Persian
Indonesian
Icelandic
Italian
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Kinyarwanda
Sanskrit
Assamese
Aymara
Hebrew
Japanese
Sindhi
Sangro
1052
Azerbaijani
1165
Finnish
1269
yiddish
1357
Malay
1502
Serbo-Croatian
1538
Turkish
1053
1057
1059
1060
1069
Bashkir
Byelorussian
Bulgarian
Bihari
1166
1171
1174
1181
1183
Fiji
1283
1287
1297
1298
1299
Javanese
Georgian
1358
1363
1365
1369
1376
Maltese
Burmese
Nauru
1503
1505
1506
1507
1508
Singhalese
Slovak
1539
1540
1543
1557
1564
Tsonga
Tatar
Faeroese
French
Frisian
Irish
Kazakh
Slovenian
Samoan
Shona
Twi
Greenlandic
Cambodian
Nepali
Ukrainian
Urdu
Bislama
Dutch
Bengali;
Bangla
1066
1186
Scots Gaelic
1300
Canada
1379
Norwegian
1509
Somali
1572
Uzbek
1067
1070
1079
1093
1097
Tibetan
Breton
1194
1196
1203
1209
1217
Galician
Guarani
Gujarati
Hausa
Hindi
1301
1305
1307
1311
1313
Korean
Kashmiri
Kurdish
Kirghiz
Latin
1393
1403
1408
1417
1428
Occitan
(Afan) Oromo
Oriya
1511
1512
1513
1514
1515
Albanian
Serbian
1581
1587
1613
1632
1665
Vietnamese
Volapuk
Wolof
Catalan
Corsican
Czech
Siswati
Punjabi
Sesotho
Sundanese
Xhosa
Polish
yoruba
1103
Welsh
1226
Croatian
1326
Lingala
1435
Pashto, Pushto
1516
Swedish
1684
1697
Chinese
Zulu
1105
1109
Danish
1229
1233
Hungarian
Armenian
1327
1332
Laothian
1436
1463
Portuguese
Quechua
1517
1521
Swahili
Tamil
German
Lithuanian
Latvian,
Lettish
Rhaeto-
1130
Bhutani
1235
Interlingua
1334
1481
1525
Tegulu
Romance
ꢁꢆ
Français
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 38
2011-03-05 �� 11:31:47
Caractéristiques
2,76 Kg
Poids
430 (L) x 59 (H) x 249 (P) mm
+5°C à +35°C
10 % à 75 %
70 dB
Dimensions
Généralités
Plage de températures de fonctionnement
Plage de taux d’humidité de fonctionnement
Rapport signal/bruit
10 dB
Syntoniseur FM
Sensibilité utilisable
0,5 %
Distorsion harmonique totale
Vitesse de lecture : 3,49 à 4,06 m/s
Durée approximative de lecture (Disque simple face, simple couche) : 135 min
Vitesse de lecture : 4,8 à 5,6 m/s
Durée maximale de lecture : 74 min
Vitesse de lecture : 4,8 à 5,6 m/s
Durée maximale de lecture : 20 min
480i(576i)
DVD (Digital Versatile Disc)
12 cm (DISQUE COMPACT)
8cm (DISQUE COMPACT)
Vidéo Composite
Disque
1 canal : 1,0 Vpp (charge de 75
480i(576i)
Ω)
Sortie vidéo
Vidéo/Audio
Y : 1,0 Vpp (charge de 75
Ω)
Vidéo composant
PR : 0,70 Vpp (charge de 75
PB : 0,70 Vpp (charge de 75
Ω
Ω
)
)
1080p, 1080i, 720p, 480p(576p)
HDMI
142W x 2(3
142W(3
141W x 2(3
142W(3
Ω
)
)
Sortie de l’enceinte avant
Sortie de l'enceinte du centre
Sortie enceinte ambiophonique
Ω
)
Ω
Ω)
Sortie du caisson de basses
Gamme de fréquences
Rapport signal sur bruit
Séparation des canaux
Sensibilité d'entrée
Amplificateur
20 Hz à 20 kHz
65dB
60dB
(AUX) 800 mV
*: Caractéristiques nominales
- Samsung Electronics Co., Ltd se réserve le droit de modifier les caractéristiques techniques sans avis
préalable.
- Le poids et les dimensions sont approximatifs.
- La conception et les spécifications peuvent être modifiées sans préavis.
- Concernant l'alimentation et la consommation électrique, reportez-vous à l'étiquette apposée sur le produit.
Français
ꢁꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 39
2011-03-05 �� 11:31:47
Autres informations
HT-D450
Système d’enceintes 5+1 canaux
Système d'enceintes
Avant
3 Ω
Ambiophonique Centrale
Caisson de graves
3 Ω
Impédance
3 Ω
3 Ω
Gamme de fréquences
Niveau de pression acoustique de sortie
140Hz~20KHz 40Hz~160Hz
140Hz~20KHz 140Hz~20KHz
86dB/W/M
142W
88dB/W/M
142W
86dB/W/M
142W
86dB/W/M
141W
Entrée nominale
Enceinte
284W
284W
Entrée maximale
284W
282W
Avant : 90 x 141,5 x 68,5 mm
Ambiophonique : 84 x 104,5 x 68,5 mm
Centrale : 360 x 74,5 x 68,5 mm
Dimensions (L x H x P)
Poids
Caisson de graves : 168 x 350 x 285 mm
Avant: 0,58 Kg, Centrale : 0,96 Kg
Ambiophonique : 0,4 Kg, Caisson de graves : 3,6 Kg
HT-D453
Système d’enceintes 5+1 canaux
Système d'enceintes
Avant
3 Ω
Ambiophonique Centrale
3 Ω 3 Ω
Caisson de graves
3 Ω
Impédance
40Hz~160Hz
88dB/W/M
142W
Gamme de fréquences
Niveau de pression acoustique de sortie
Entrée nominale
140Hz~20KHz 140Hz~20KHz 140Hz~20KHz
86dB/W/M
142W
86dB/W/M
141W
86dB/W/M
142W
284W
Entrée maximale
Enceinte
284W
282W
284W
Avant : 90 x 1200 x 119 mm (socle : 250 x 250)
Ambiophonique : 84 x 104,5 x 68,5 mm
Centrale : 360 x 74,5 x 68,5 mm
Dimensions (L x H x P)
Caisson de graves : 168 x 350 x 285 mm
Avant : 3,68 Kg, Centrale : 0,96 Kg
Ambiophonique : 0,4 Kg, Caisson de graves : 3,6 Kg
Poids
HT-D455
Système d’enceintes 5+1 canaux
Système d'enceintes
Avant
3 Ω
Ambiophonique Centrale
3 Ω
3 Ω
Caisson de graves
3 Ω
Impédance
40Hz~160Hz
88dB/W/M
142W
140Hz~20KHz 140Hz~20KHz 140Hz~20KHz
Gamme de fréquences
Niveau de pression acoustique de sortie
Entrée nominale
86dB/W/M
142W
86dB/W/M
141W
86dB/W/M
142W
Enceinte
284W
Entrée maximale
284W
282W
284W
Avant/Ambiophonique : 90 x 1200 x 119 mm (socle : 250 x 250)
Centrale : 360 x 74,5 x 68,5 mm
Dimensions (L x H x P)
Poids
Caisson de graves 168 x 350 x 285 mm
:
Avant/Ambiophonique : 3,68 Kg, Centrale : 0,96 Kg
Caisson de graves : 3,6 Kg
ꢂ0
Français
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 40
2011-03-05 �� 11:31:47
Comment contacter Samsung dans le monde
Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service
Consommateurs Samsung.
Area
` North America
Canada
Mexico
U.S.A
` Latin America
Argentine
Brazil
Contact Center
Web Site
Area
Serbia
Contact Center
0700 Samsung (0700 726
7864)
0800-SAMSUNG (726-7864)
902-1-SAMSUNG (902 172 678) www.samsung.com
0771 726 7864 (SAMSUNG)
Web Site
www.samsung.com
1-800-SAMSUNG (726-7864)
01-800-SAMSUNG (726-7864) www.samsung.com
1-800-SAMSUNG (726-7864)
www.samsung.com
Slovakia
Spain
Sweden
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/ch
www.samsung.com/
ch_fr/(French)
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
0800-333-3733
0800-124-421 / 4004-0000
800-SAMSUNG (726-7864)
01-8000112112
0-800-507-7267
1-800-751-2676
1-800-10-7267
800-6225
1-800-299-0013
800-7919267
1-800-234-7267
00-1800-5077267
800-7267
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
0848-SAMSUNG (7267864,
CHF 0.08/min)
Switzerland
Chile
U.K
Eire
Lithuania
Latvia
Estonia
0330 SAMSUNG (7267864)
0818 717100
8-800-77777
8000-7267
800-7267
Colombia
Costa Rica
Dominica
Ecuador
El Salvador
Guatemala
Honduras
Jamaica
` CIS
Russia
Georgia
Armenia
Azerbaijan
8-800-555-55-55
8-800-555-555
0-800-05-555
088-55-55-555
8-10-800-500-55-500
(GSM: 7799)
8-10-800-500-55-500
00-800-500-55-500
8-10-800-500-55-500
www.samsung.com
-
-
-
Nicaragua
Panama
Kazakhstan
www.samsung.com
Peru
0-800-777-08
1-800-682-3180
Puerto Rico
Trinidad &
Tobago
Venezuela
` Europe
Albania
Uzbekistan
Kyrgyzstan
Tadjikistan
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.ua
www.samsung.com/
ua_ru
1-800-SAMSUNG (726-7864)
0-800-100-5303
www.samsung.com
www.samsung.com
Ukraine
0-800-502-000
42 27 5755
0810 - SAMSUNG (7267864,
€ 0.07/min)
-
Belarus
Moldova
` Asia Pacific
Australia
New Zealand
China
810-800-500-55-500
00-800-500-55-500
-
-
Austria
www.samsung.com
www.samsung.com/
be (Dutch)
Belgium
02-201-24-18
1300 362 603
www.samsung.com
www.samsung.com/
0800 SAMSUNG (0800 726 786) www.samsung.com
400-810-5858 / 010-6475 1880 www.samsung.com
www.samsung.com/hk
be_fr (French)
Bosnia
Bulgaria
Croatia
05 133 1999
07001 33 11
-
www.samsung.com
Hong Kong
(852) 3698 4698
www.samsung.com/
hk_en/
062 SAMSUNG (062 726 7864) www.samsung.com
800-SAMSUNG (800-726786)
3030 8282 / 1800 110011 /
1800 3000 8282 / 1800 266 8282
0800-112-8888 /
021-5699-7777
0120-327-527
1800-88-9999
1-800-10-SAMSUNG(726-7864) /
1-800-3-SAMSUNG(726-7864) /
1-800-8-SAMSUNG(726-7864) /
02-5805777
1800-SAMSUNG (726-7864)
1800-29-3232 / 02-689-3232 www.samsung.com
0800-329-999
1 800 588 889
India
www.samsung.com
www.samsung.com
Samsung Zrt., česká organizační
Czech
www.samsung.com
složka, Oasis Florenc, Soko-
lovská394/17, 180 00, Praha 8
Indonesia
Denmark
Finland
France
70 70 19 70
030 - 6227 515
01 48 63 00 00
01805 - SAMSUNG (726-7864
€ 0,14/Min)
06-80-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
+381 0113216899
261 03 710
023 207 777
020 405 888
0900-SAMSUNG
(0900-7267864) (€ 0,10/Min)
815-56 480
0 801 1SAMSUNG (172678)
/ 022-607-93-33
80820-SAMSUNG (726-7864)
www.samsung.com
www.samsung.com
www.samsung.com
Japan
Malaysia
www.samsung.com
www.samsung.com
Germany
www.samsung.com
Philippines
www.samsung.com
www.samsung.com
Hungary
Italia
Kosovo
Luxemburg
Macedonia
Montenegro
www.samsung.com
www.samsung.com
Singapore
Thailand
Taiwan
Vietnam
` Middle East
Bahrain
Egypt
Jordan
Morocco
Oman
Saudi Arabia
Turkey
-
www.samsung.com
www.samsung.com
www.samsung.com
-
-
8000-4726
08000-726786
800-22273
080 100 2255
800-SAMSUNG (726-7864)
9200-21230
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
Netherlands
Norway
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
Poland
Portugal
1. 08010 SAMSUNG (72678) -
doar din reţeaua Romtelecom,
tarif local
2. 021.206.01.10 - din orice
reţea, tarif normal
444 77 11
800-SAMSUNG (726-7864)
U.A.E
` Africa
Nigeria
Rumania
www.samsung.com
0800-SAMSUNG (726-7864)
0860-SAMSUNG (726-7864 )
www.samsung.com
www.samsung.com
South Africa
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 41
2011-03-05 �� 11:31:47
Elimination des batteries de ce produit
(Applicable aux pays de l’Union européenne et aux autres pays européens dans lesquels des systèmes de
collecte sélective sont mis en place.)
Le symbole sur la batterie, le manuel ou l'emballage indique que les batteries de ce produit ne doivent pas être
éliminées en fin de vie avec les autres déchets ménagers. L'indication éventuelle des symboles chimiques Hg,
Cd ou Pb signifie que la batterie contient des quantités de mercure, de cadmium ou de plomb supérieures aux
niveaux de référence stipulés dans la directive CE 2006/66. Si les batteries ne sont pas correctement éliminées,
ces substances peuvent porter préjudice à la santé humaine ou à l'environnement.
Afin de protéger les ressources naturelles et d'encourager la réutilisation du matériel, veillez à séparer les batteries
des autres types de déchets et à les recycler via votre système local de collecte gratuite des batteries.
Les bons gestes de mise au rebut de ce produit (Déchets
d’équipements électriques et électroniques)
(Applicable dans les pays de l’Union Européenne et dans d’autres pays européens pratiquant le tri sélectif)
Ce symbole sur le produit, ses accessoires ou sa documentation indique que ni le produit, ni ses accessoires
électroniques usagés (chargeur, casque audio, câble USB, etc.) ne peuvent être jetés avec les autres déchets
ménagers. La mise au rebut incontrôlée des déchets présentant des risques environnementaux et de santé publique,
veuillez séparer vos produits et accessoires usagés des autres déchets. Vous favoriserez ainsi le recyclage de la
matière qui les compose dans le cadre d’un développement durable.
Les particuliers sont invités à contacter le magasin leur ayant vendu le produit ou à se renseigner auprès des autorités
locales pour connaître les procédures et les points de collecte de ces produits en vue de leur recyclage.
Les entreprises et professionnels sont invités à contacter leurs fournisseurs et à consulter les conditions de leur contrat
de vente. Ce produit et ses accessoires ne peuvent être jetés avec les autres déchets professionnels et commerciaux.
Code No. AH68-02259B
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-FR-0304.indd 42
2011-03-05 �� 11:31:48
HT-D450
HT-D453
HT-D455
Digitales Heimkino-System
Bedienungsanleitung
Erleben Sie die Möglichkeiten
Danke, dass Sie sich für dieses Produkt von Samsung
entschieden haben.
Registrieren Sie Ihr Produkt unter folgendem Link, und
profitieren Sie von unserem umfassenden Kundenservice:
www.samsung.com/register
Download from Www.Somanuals.com. All Manuals Search And Download.
1
HT-D450-EN-DE-0304.indd
2011-03-05 �� 11:26:38
Sicherheitsinformationen
Sicherheitshinweise
ZUR VERMEIDUNG VON STROMSCHLÄGEN DARF DIESES GERÄT NICHT GEÖFFNET WERDEN.
ES ENTHÄLT KEINE BAUTEILE, DIE VOM BENUTZER GEWARTET ODER REPARIERT WERDEN KÖNNEN. WARTUNGS- UND
REPARATURARBEITEN DÜRFEN NUR VON FACHPERSONAL AUSGEFÜHRT WERDEN.
ACHTUNG
GEFAHR VON STROMSCHLÄGEN
NICHT ÖFFNEN
Dieses Symbol weist auf eine
„gefährliche Netzspannung" im
Inneren des Players hin. Es besteht
die Gefahr von Stromschlägen und
Körperverletzungen.
ACHTUNG : UM STROMSCHLÄGE ZU
VERMEIDEN, RICHTEN SIE DEN BREITEN
KONTAKTSTIFT DES STECKERS AN DEM
BREITEN STECKPLATZ AUS UND STECKEN
SIE DEN STECKER VOLLSTÄNDIG EIN.
Dieses Symbol weist auf wichtige
Anweisungen im Begleitmaterial
zum Produkt hin.
WARNUNG
CLASS 1
LASER PRODUCT
LASER PRODUKT
LASER LAITE
KLASSE 1
LUOKAN 1
KLASS 1
~
Schützen Sie das Gerät vor Nässe und
Feuchtigkeit, um die Gefahr von Bränden oder
Stromschlägen zu verringern.
LASER APPARAT
PRODUCTO LÁSER CLASE 1
LASERPRODUKT DER KLASSE 1
ACHTUNG
Dieser CD-Player ist ein LASERPRODUKT DER
KLASSE 1.
~
Das Gerät darf nicht mit Wasser oder anderen
Flüssigkeiten in Berührung kommen. Außerdem dürfen
keine mit Flüssigkeiten gefüllten Behälter, wie
beispielsweise Vasen, darauf abgestellt werden.
Um das Gerät vom Netz zu trennen, muss der
Netzstecker aus der Steckdose gezogen werden. Stellen
Sie deshalb sicher, dass Sie den Netzstecker stets leicht
erreichen können.
Dieses Gerät darf nur an eine Netzsteckdose mit
Schutzerdung angeschlossen werden.
Der Netzstecker sollte jederzeit in Reichweite und
zugänglich sein, da er aus der Steckdose entfernt werden
muss, um das Gerät vollständig abzuschalten.
Lesen Sie vor Inbetriebnahme des Geräts die
vorliegende Bedienungsanleitung. Bitte beachten
Sie alle Sicherheits- und Bedienhinweise.
Verwenden Sie das Gerät ausschließlich wie in der
Anleitung beschrieben. Auf diese Weise können
Sie Ihr neues Gerät von Anfang an optimal nutzen
und vermeiden Bedienfehler.
~
~
~
ACHTUNG
~
UNSICHTBARER LASERSTRAHL BEI GEÖFFNETEM
GERÄT ODER BESCHÄDIGTER VERRIEGELUNG,
KONTAKT MIT LASERSTRAHL VERMEIDEN!
ꢀ
Deutsch
Download from Www.Somanuals.com. All Manuals Search And Download.
2
HT-D450-EN-DE-0304.indd
2011-03-05 �� 11:26:38
Vorsichtsmaßnahmen
~
~
~
Stellen Sie sicher, dass die Stromversorgung in Ihrem Haus den auf der Rückseite Ihres Produkts angegebenen
Anforderungen entspricht.
Stellen Sie den Player horizontal auf einer geeigneten Unterlage (Möbel) auf, so dass um ihn herum ausreichend
Platz (7,5-10 cm) zur Belüftung bleibt.
Stellen Sie das Gerät nicht auf Verstärker oder andere Geräte, die heiß werden können.
Achten Sie darauf, dass die Belüftungsöffnungen nicht abgedeckt sind.
~
~
~
Stellen Sie keine Gegenstände auf das Gerät.
Stellen Sie sicher, dass keine Disk eingelegt ist, bevor Sie das Gerät bewegen.
Ziehen Sie zum sicheren Trennen des Geräts von der Stromversorgung den Netzstecker aus der Steckdose,
insbesondere, wenn Sie das Gerät längere Zeit nicht nutzen.
~
~
~
Ziehen Sie bei Gewittern das Stromkabel aus der Steckdose. Durch Blitze verursachte Spannungsspitzen
können zur Beschädigung des Geräts führen.
Halten Sie das Gerät von direkter Sonneneinstrahlung oder anderen Wärmequellen fern. Andernfalls können
Überhitzung und Fehlfunktionen der Anlage auftreten.
Schützen Sie das Produkt vor Feuchtigkeit, übermäßiger Hitze oder Geräten, die starke magnetische oder
elektrische Felder erzeugen (z. B. Lautsprecher).
~
~
Trennen Sie das Netzkabel bei Fehlfunktionen des Geräts von der Stromversorgung.
Ihr Produkt ist nicht für den gewerblichen Einsatz vorgesehen. Verwenden Sie dieses Produkt nur für den
privaten Bereich.
~
~
Wenn Sie Ihr Heimkino-System oder eine CD aus dem Kalten ins Warme bringen, kann sich Feuchtigkeit darauf
niederschlagen. Warten Sie in solchen Fällen ca. 2 Stunden, bis das Gerät Raumtemperatur erreicht hat, bevor
Sie es in Betrieb nehmen.
Die in diesem Produkt verwendeten Batterien enthalten umweltschädliche Chemikalien.
Entsorgen Sie die Batterien nicht im Hausmüll sondern über eine entsprechende Sammelstelle (siehe Hinweis am
Ende dieses Benutzerhandbuchs).
Zubehör
Überprüfen Sie, ob die folgenden Teile im Lieferumfang enthalten sind:
FUNCTION
TV SOURCE
POWER
RECEIVER
SLEEP
DVD
TV
1
4
7
2
5
8
0
3
6
9
D
S
P
/
E
Q
MUTE
TUNING
/CH
VOL
DISC MENU
TOOLS
REPEA
T
MENU
T
I
T
L
E
M
E
N
U
INFO
RETURN
EXIT
D
A
B
C
AUDIO
DIMMER
GIGA
S.VOL
UPSCALE
P.BASS
TUNER
S
/
W
L
E
V
E
L
MEMOR
Y
MO/ST
U
S
B
R
E
C
Fernbedienung/
AAA-Batterien
Videokabel
UKW-Antenne
Bedienungsanleitung
SCART-Buchse
Deutsch
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
3
HT-D450-EN-DE-0304.indd
2011-03-05 �� 11:26:39
Sicherheitsinformationen
Vorsichtsmaßnahmen beim Verwenden
und Lagern von Disks
Lizenz
~
INFOS ZU DIVX VIDEO: DivX® ist ein digitales
Videoformat, das von der Firma DivX, Inc. entwickelt
wurde. Dieses Gerät ist offiziell von DivX zertifiziert und gibt DivX-
Videodateien wieder. Nähere Informationen und Softwareanwendungen zum
Konvertieren Ihrer Videodateien in das DivX Video Format finden Sie unter
www.divx.com.
Kratzer auf der Disk könnten die Ton- und
Bildqualität verringern sowie Sprünge bei der
Wiedergabe verursachen.
Achten Sie besonders darauf, den Disks bei der
Handhabung keine Kratzer zuzufügen.
INFOS ZU DIVX VIDEO-ON-DEMAND: Dieses DivX®-zertifizierte Gerät muss
registriert werden, damit erworbene Video-On-Demand-Inhalte (VOD)
wiedergegeben werden können. Um den Registrierungscode zu erhalten,
wechseln Sie in den DivX VOD-Bereich im Setup-Menü des Geräts. Weitere
Informationen über den Abschluss der Registrierung finden Sie unter vod.
divx.com.
Halten der Disks
~
~
Berühren Sie nicht die Wiedergabeseite einer Disk.
Halten Sie die Disk mit den
Fingerspitzen am Rand fest, damit
keine Fingerabdrücke auf der
DivX Certified® für die Wiedergabe von DivX® Video, einschließlich
gebührenpflichtiger Inhalte DivX®, DivX Certified® und die dazugehörigen
Logos sind Handelsmarken der DivX, Inc. und werden unter Lizenz
verwendet.
beschreibbaren Oberfläche zurückbleiben.
~
Kleben Sie kein Papier oder Klebeband auf die Disk
Geschützt durch eines oder mehrere der folgenden U.S. Patente
7,295,673; 7,460,668; 7,515,710; 7,519,274
Disk-Lagerung
~
HDMI, das HDMI Logo und High-Definition
Multimedia Interface sind in den USA und anderen
Ländern Handelsmarken oder registrierte Handelsmarken der HDMI
~
~
~
Setzen Sie die Disk nicht direkter
Sonneneinstrahlung aus.
Bewahren Sie die Disk an einem kühlen, gut
belüfteten Ort auf.
Bewahren Sie die Disk in einer sauberen
Licensing LLC.
~
~
Dieses Gerät nutzt eine durch U.S. Patente und andere Schutz- und
Urheberrechte geschützte Kopierschutztechnologie der Rovi Corporation.
Reverse Engineering und Disassemblierung sind verboten.
Schutzhülle auf. Stellen Sie die Disk vertikal auf.
Dolby sowie das Doppel-D-Symbol sind Handelsmarken der Dolby
Laboratories.
✎
`
HINWEIS
Achten Sie darauf, dass die Disk nicht
verschmutzt wird.
Copyright
`
Legen Sie keine beschädigten oder zerkratzten
Disks ein.
© 2011 Samsung Electronics Co., Ltd. Alle Rechte
vorbehalten.
Verwenden und Lagern von Disks
Kopierschutz
Wenn sich Fingerabdrücke oder Schmutz auf der
Disk befinden, säubern Sie sie mit einem milden
Reinigungsmittel und einem weichen Tuch.
~
Viele DVDs sind mit einem Kopierschutz versehen. Daher sollten Sie
Ihre Anlage unbedingt direkt an das Fernsehgerät und nicht an einen
Videorekorder anschließen. Der Anschluss an einen Videorekorder
löst bei einer mit einem Kopierschutz versehenen DVD Bildstörungen
aus.
~
Säubern Sie die Disk von innen nach außen.
✎
HINWEIS
`
Wenn kalte Teile des Heimkino-Systems mit warmer
Luft in Kontakt kommen, kann sich Feuchtigkeit darauf
niederschlagen. Bei Feuchtigkeit innerhalb des Players
funktioniert dieses ggf. nicht ordnungsgemäß.
Entnehmen Sie in diesem Fall die Disk, und lassen Sie
das Gerät mit eingeschalteter Stromversorgung für ein
bis zwei Stunden trocknen.
ꢂ
Deutsch
Download from Www.Somanuals.com. All Manuals Search And Download.
4
HT-D450-EN-DE-0304.indd
2011-03-05 �� 11:26:39
Inhalt
SICHERHEITSINfORmATIONEN
2
3
3
4
Sicherheitshinweise
Vorsichtsmaßnahmen
Zubehör
Vorsichtsmaßnahmen beim Verwenden und Lagern von
Disks
Lizenz
Copyright
Kopierschutz
2
4
4
4
7
7
Symbole in dieser Bedienungsanleitung
Merkmale der einzelnen Disks
ERSTE SCHRITE
11 Beschreibung
11
12
Vorderseite des Geräts
Rückseite des Geräts
7
13 Fernbedienung
15 Lautsprecher anschließen
18 Fernsehgerät anschließen
20 UKW-Antenne anschließen
ANSCHLÜSSE
21
Andere Audiogeräte anschließen
15
22 Vor Inbetriebnahme des Geräts
22 Setup-Menü einstellen
23 Anzeige
SYSTEm-SETUP
23
23
23
23
23
TV-Bildformat
BD Wise
22
Auflösung
HDMI-Format
Video Ausgangssignal
24 Audio
24
25
25
25
26
26
Lautsprech Ereinstellung
DRC (Dynamic Range Compression)
Audio-Sync
HDMI AUDIO
Benutzer-EQ
Audioausgabekanal
26 System
26
26
26
Ersteinstellung
DivX(R)-Registrierung
DivX(R) Deaktivierung
27 Sprache
27 Sicherheit
27
27
Kindersicherung
Passwort ändern
27 Unterstützung
27
Produktinformationen
Deutsch
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
5
HT-D450-EN-DE-0304.indd
2011-03-05 �� 11:26:39
Inhalt
28 Disks wiedergeben
GRUNDfUNKTIONEN
28 Audio-CDs und MP3/WMA-Disks wiedergeben
29 JPEG-Dateien wiedergeben
29 Wiedergabefunktion verwenden
33 Tonmodus
28
35 UKW-Radio hören
36 USB-Funktion verwenden
36 USB Aufnahme
ZUSATZfUNKTIONEN
36
37 Fehlerbehebung
38 Sprachcode-Liste
39 Technische Daten
SONSTIGE INfORmATIONEN
37
•
•
Abbildungen und Illustrationen in diesem Handbuch dienen nur als Beispiel und können vom Aussehen des Produkts
abweichen.
Verwaltungskosten werden abgerechnet, wenn
a. Auf Ihren Wunsch ein Ingenieur zu Ihnen geschickt wird, und es liegt kein Defekt des Geräts vor
(d.h. wenn Sie dieses Benutzerhandbuch nicht gelesen haben)
b. Sie das Gerät in eine Reparaturwerkstatt bringen, und es liegt kein Defekt des Geräts vor
(d.h. wenn Sie dieses Benutzerhandbuch nicht gelesen haben).
•
Der abgerechnete Betrag wird Ihnen mitgeteilt, ehe irgendwelche Arbeiten oder Kundenbesuche ausgeführt werden.
ꢄ
Deutsch
Download from Www.Somanuals.com. All Manuals Search And Download.
6
HT-D450-EN-DE-0304.indd
2011-03-05 �� 11:26:39
Erste Schritte
Symbole in dieser Bedienungsanleitung
merkmale der einzelnen Disks
Informieren Sie sich vor dem Lesen der
Bedienungsanleitung über die nachstehenden
Begriffe.
Regionalcode
Das Heimkino-Gerät und die DVDs sind nach Regionen
codiert. Für die Wiedergabe müssen diese Codes
zusammenpassen. Wenn dies nicht der Fall ist, kann die
Disk nicht wiedergegeben werden.
Symbol
Begriff
Erklärung
Hier handelt es sich um eine
Funktion, die bei DVD-Video
oder DVD±R/±RW zur
Verfügung steht, die im
Videomodus beschrieben
und fixiert wurden.
DVD
d
Disktyp Regionalcode
Region
USA, US-Territorien und Kanada
1
2
Hier handelt es sich um eine
Funktion, die bei Daten-CDs
(CD DA, CD-R/-RW) zur
Verfügung steht.
Europa, Japan, Naher Osten,
Ägypten, Südafrika, Grönland
CD
MP3
JPEG
DivX
B
A
G
D
Taiwan, Korea, Philippinen,
Indonesien, Hongkong
Hier handelt es sich um eine
Funktion, die bei CD-R/-RW
mit MP3-Dateien zur
3
DVD-
Mexiko, Südamerika,
Mittelamerika, Australien,
Neuseeland, Pazifische Inseln,
Karibik
Verfügung steht.
VIDEO
4
Hier handelt es sich um eine
Funktion, die bei CD-R/-RW
mit JPEG-Dateien zur
Verfügung steht.
Russland, Osteuropa, Indien, die
meisten afrikanischen Länder,
Nordkorea, Mongolei
5
6
Hier handelt es sich um eine
Funktion, die bei MPEG4-
Disks zur Verfügung steht.
(DVD±R/±RW, CD-R/-RW)
China
Hierbei liegt ein Fall vor, in dem
eine Funktion nicht
ordnungsgemäß arbeitet oder in
dem ein Einstellungsvorgang
abgebrochen wurde.
ACHTUNG
!
Verweist auf Tipps oder
Anweisungen auf der Seite, die
beim korrekten Ablauf von
Funktionen helfen.
HINWEIS
✎
Zum direkten Zugriff auf eine
Funktion durch Drücken der
Taste auf der Fernbedienung.
Schnellzugriff
Deutsch
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
7
HT-D450-EN-DE-0304.indd
2011-03-05 �� 11:26:40
Erste Schritte
~
Nur ordnungsgemäß "abgeschlossene" CD-R können
vollständig wiedergegeben werden. Wenn die Sitzung
abgeschlossen wurde, ohne jedoch auch die Disk
abzuschließen, kann die Disk evtl. nicht vollständig
Abspielbare Disktypen
Disktyp &
Kennzeichnung Aufnahmesignale
Disk-
Größe
Maximale
Spieldauer
abgespielt werden.
(Logo)
CD-R-Disks mit MP3-Dateien
ca. 240 Minuten
(einseitig)
~
~
~
Nur CD-R mit MP3-Dateien in den Formaten ISO 9660 oder
Joliet können wiedergegeben werden.
Der Name der MP3-Dateien darf keine Leerzeichen und
Sonderzeichen (. / = +) enthalten.
Verwenden Sie Disks, die mit einer Datenkompression/-
dekompression von mehr als 128 kbit/s aufgenommen
wurden.
12 cm
ca. 480 Minuten
(doppelseitig)
AUDIO
+
ca. 80 Minuten
(einseitig)
VIDEO
DVD-VIDEO
8 cm
ca. 160 Minuten
(doppelseitig)
~
~
Nur Dateien mit den Dateinamenserweiterungen „.mp3“ und
„.MP3“ können wiedergegeben werden.
12 cm
AUDIO
74 Minuten
20 Minuten
Nur eine durchgehend beschriebene Multisession-CD kann
wiedergegeben werden. Wenn die Multisession-Disk ein leeres
Segment enthält, erfolgt die Wiedergabe nur bis zu dem leeren
Segment.
8 cm
AUDIO-CD
DivX
AUDIO
+
12 cm
8 cm
~
~
Wenn die Disk beim Brennen nicht abgeschlossen wurde, wird
der Start der Wiedergabe verzögert, und eventuell werden
nicht alle aufgezeichneten Dateien wiedergegeben.
Bei Dateien, die im VBR-Format (variable Bitraten) sowohl mit
niedrigen als auch mit höheren Bitraten (z. B. von 32 kbit/s bis
320 kbit/s) beschrieben wurden, kann der Ton bei der
Wiedergabe stottern.
VIDEO
Folgende Disktypen nicht verwenden!
~
LD, CD-G, CD-I, CD-ROM, DVD-ROM und DVD-RAM
können mit diesem Heimkino-System nicht wiedergegeben
werden. Sollten derartige Disks in das Gerät eingelegt
werden, wird die Meldung <WRONG DISC FORMAT
(FALSCHES DISKFORMAT)> auf dem Bildschirm angezeigt.
~
~
Pro CD können maximal 500 Titel wiedergegeben werden.
Pro CD können maximal 300 Ordner wiedergegeben werden.
~
Im Ausland gekaufte DVDs können möglicherweise mit
diesem Produkt nicht wiedergegeben werden.Sollten
derartige DVDs in das Gerät eingelegt werden, wird die
Meldung <Wrong Region. Please check Disc. (Falsche
Region. Bitte Disk überprüfen.)> auf dem Bildschirm
CD-R-Disks mit JPEG-Dateien
~
Nur Dateien mit der Erweiterung „.jpg“ können
wiedergegeben werden. Wenn die Disk beim Brennen
nicht abgeschlossen wurde, wird der Start der Wiedergabe
verzögert, und eventuell werden nicht alle aufgezeichneten
Dateien wiedergegeben.
angezeigt.
~
~
Nur CD-R mit JPEG-Dateien in den Formaten ISO 9660
oder Joliet können wiedergegeben werden.
Die JPEG-Dateinamen sollten aus maximal 8 Zeichen
bestehen und keine Leer- oder Sonderzeichen (. / = +)
enthalten.
Disktypen und Diskformat
Dieses Produkt unterstützt keine Mediendateien, die durch
DRM (Digital Rights Management) geschützt sind.
CD-RW
~
Nur eine durchgehend beschriebene Multisession-CD kann
wiedergegeben werden. Wenn die Multisession-Disk ein
leeres Segment enthält, erfolgt die Wiedergabe nur bis zu
diesem Segment.
~
Einige CD-R-Disks können in Abhängigkeit vom
Aufnahmegerät (CD-Rekorder oder PC) oder vom Zustand
der Disk evtl. nicht abgespielt werden.
~
~
In einem Ordner können maximal 999 Bilder gespeichert
werden.
~
Verwenden Sie CD-R mit 650 MB/74 Minuten
Speicherkapazität. Verwenden Sie keine CD-R mit über 700
MB/80 Minuten Kapazität, weil sie möglicherweise nicht
wiedergegeben werden können.
Bei der Wiedergabe von Kodak/Fuji Picture CDs können
nur die JPEG-Dateien im Bildordner wiedergegeben
werden.
~
Einige (wiederbeschreibbare) CD-RW-Disks werden
möglicherweise nicht wiedergegeben.
~
Bei allen anderen Disks außer Kodak/Fuji Picture CDs,
kann sich der Start der Wiedergabe verzögern, oder die
Wiedergabe überhaupt nicht erfolgen.
ꢆ
Deutsch
Download from Www.Somanuals.com. All Manuals Search And Download.
8
HT-D450-EN-DE-0304.indd
2011-03-05 �� 11:26:40
DVD±R/±RW und CD-R/RW
~
Softwareaktualisierungen für inkompatible
Formate werden nicht unterstützt. (Beispiel: QPEL,
GMC, höhere Auflösung als 800 x 600 Pixel, usw.)
~
Wenn eine DVD-R/-RW nicht korrekt im DVD-
Videoformat aufgenommen wurde, kann sie nicht
wiedergegeben werden.
Unterstützte Formate (DivX)
Dieses Produkt unterstützt ausschließlich die
nachfolgend aufgeführten Medienformate.
Sollten weder das Video- noch das Audioformat
unterstützt werden, wird der Film möglicherweise
fehlerhaft bzw. ohne Ton wiedergegeben.
Unterstützte Videoformate
Format
Unterstützte Versionen
AVI
WMV
DivX3.11~DivX5.1, XviD
V1/V2/V3/V7
Unterstützte Audioformate
Sampling-
Frequenz
Bitrate
Format
MP3
WMA
AC3
80~320 kbit/s
56~128 kbit/s
128~384 kbit/s
1,5 Mbit/s
44,1 kHz
44,1/48 kHz
44,1 kHz
DTS
~
~
DivX-Dateien einschließlich Audio- und Videodateien,
die im DTS-Format erstellt wurden, werden nur bis 6
Mbit/s unterstützt.
Seitenverhältnis : Obwohl die Standard-DivX-Auflösung
640x480 Pixel ist, unterstützt dieses Produkt bis zu 720 x
480 Pixel. Höhere TV-Bildschirmauflösungen als 800
werden nicht unterstützt.
~
Bei der Wiedergabe von Disks mit einer Sampling-
Frequenz von mehr als 48 kHz oder 320 kbit/s kann das
Bild bei der Wiedergabe am Bildschirm zittern.
Abschnitte mit einer hohen Bildfrequenz werden bei der
Wiedergabe einer DivX-Datei ggf. nicht abgespielt.
Da das Produkt nur von DivX Networks, Inc. autorisierte
Codierformate unterstützt, werden vom Benutzer erstellte
DivX-Dateien möglicherweise nicht wiedergegeben.
~
~
Deutsch
ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
9
HT-D450-EN-DE-0304.indd
2011-03-05 �� 11:26:40
Erste Schritte
Notizen zum USB-Anschluss
14) Unterstützte Dateiformate
Unterstützte Geräte: USB-Speichermedien, MP3-
Player, Digitalkamera
Format
Foto
Musik
Film
Dateiname
JPG
MP3
WMA
WMV
DivX
.AVI
1) Werden nicht unterstützt wenn ein Ordner oder eine
Datei mehr als 10 Zeichen enthält.
2) Eine Untertiteldatei größer als 300 KB kann
möglicherweise nicht ordnungsgemäß angezeigt
werden.
Dateier-
weiterung
JPG
.JPEG
.MP3
.WMA
.WMV
80~320
kbit/s
56~128
kbit/s
Bitrate
–
–
4 Mbit/s
4 Mbit/s
3) Einige USB-/Digital Kamerageräte oder USB-
Kartenleser werden nicht unterstützt.
DivX3.11~
DivX5.1,
XviD
V1,V2,
V3,V7
4) FAT16 und FAT32 -Dateisysteme werden unterstützt.
Version
Pixel
–
V8
5) Foto (JPEG), Musik (MP3) und Video-Dateien sollten in
Koreanisch oder Englisch benannt werden.
Andernfalls kann die Datei möglicherweise nicht
wiedergeben.
6) Schließen Sie direkt am USB-Anschluss des Produkts
an. Ein zusätzliche Kabelanschluss kann USB-
Kompatibilitätsprobleme verursachen.
640x480
–
–
–
720x480
44,1 kHz - 48 kHz
Sampling-
Frequenz
44,1kHz
44,1kHz
7) Das Einlegen von mehreren Speichergeräten an Ihren
Multi-Kartenleser mag nicht eiwandfrei funktionieren.
8) PTP-Protokoll für digitale Kamera wird nicht
unterstützt.
9) Entfernen Sie das USB-Gerät während eines „Lade“-
Vorgangs nicht.
10) Je größer die Bildauflösung, desto länger die
Verzögerungszeit bei der Anzeige.
11) DRM-geschützte MP3/WMA- oder Video -Dateien die
auf kommerziellen Webseiten heruntergeladen sind,
werden nicht abgespielt.
12) Externe Festplatte wird nicht unterstützt.
13) Der maximale unterstützte Stromaufnahme eines an
den USB-Anschluss angeschlossenen externen
Geräts beträgt 500 mA (bei 5V Gleichstrom).
10
Deutsch
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 10
2011-03-05 �� 11:26:41
Beschreibung
Vorderseite des Geräts
3
1
2
4
5
6
7
8
9
10
DISKFACH
Disk hier einlegen.
1
DISPLAY
Zeigt den Wiedergabe-Status, die Uhrzeit usw. an.
Erkennt die Signale der Fernbedienung.
2
FERNBEDIENUNGSSENSOR
3
TASTE ZUM ÖFFNEN UND SCHLIESSEN
Zum Öffnen und Schließen des Diskfachs.
4
DES DISKFACHS
FUNKTIONSTASTE
STOPPTASTE
(
)
Beim Drücken dieser Taste wechselt der Modus folgendermaßen:
DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM
5
(
)
)
Beendet die Wiedergabe einer Disk.
Spielt eine Disk ab oder hält die Wiedergabe an.
Zum Einstellen der Lautstärke.
(
6
7
8
9
TASTE WIEDERGABE/PAUSE
LAUTSTÄRKETASTEN
(
)
(
,
)
Schaltet das Heimkino-System ein/aus.
EIN-/AUSSCHALTTASTE (
USB-ANSCHLUSS
)
Zum Anschließen von USB-Speichergeräten wie MP3-Player oder USB-
Flash-Speicher und zum Wiedergeben von Dateien von den USB-Geräten.
10
Deutsch
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 11
2011-03-05 �� 11:26:41
Erste Schritte
Rückseite des Geräts
1
2
3
4
5
6
7
8
9
VIDEO
OUT
FM ANT
SPEAKERS OUT
DIGITAL
AUDIO IN
HDMI OUT
FA NET
(Only For Service)
OPTICAL
COMPONENT
OUT
AUX IN
SURROUND
SUBWOOFER
SURROUND
Der Lüfter ist ständig in Betrieb, wenn das Gerät eingeschaltet ist. Beim Aufstellen des
Geräts ist ein Abstand von mindestens 10 cm auf allen Seiten des Lüfters einzuhalten.
LÜFTER
1
Für den Anschluss der Front-, Center- und Surround-Lautsprecher sowie des
Subwoofers.
LAUTSPRECHER ANSCHLÜSSE
2
EXTERNER DIGITALER OPTISCHER
EINGANG (DIGITAL AUDIO IN)
Zum Anschließen zusätzlicher Geräte mit digitalem Ausgang.
3
Zum Anschließen an ein Fernsehgerät mit HDMI-Eingang über ein HDMI-
Kabel; mit diesem Anschluss wird eine optimale Bildqualität erzielt.
HDMI-AUSGANG (HDMI OUT)
4
Zum Anschließen zusätzlicher Geräte mit analogem 2 Kanal-Audioausgang (z. B.
Videorekorder).
AUX-EINGANG
5
VIDEOAUSGANG (VIDEO OUT)
Zum Anschließen an den Videoeingang (VIDEO IN) eines Fernsehgeräts.
6
KOMPONENTENAUSGANG
(COMPONENT OUT)
Zum Anschließen an ein Fernsehgerät mit Component-Videoeingang.
7
FA NET (Nur für Service Zwecke)
Wird für Servicereparaturen verwendet.
Zum Anschließen einer UKW-Antenne.
8
UKW-ANTENNENEINGANG (FM ANT)
9
1ꢀ
Deutsch
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 12
2011-03-05 �� 11:26:42
fernbedienung
Übersicht über die Fernbedienung
Funktion auswählen.
oder
FUNCTION
TV SOURCE
POWER
TV-Videomodus auswählen.
Heimkino-Gerät ein-/ausschalten.
Legen Sie die Zeit fest, zu der
sich das Heimkino-System
automatisch ausschalten soll.
Wenn Sie in den TV-Modus wechseln
möchten, die TV-Taste drücken.
RECEIVER
SLEEP
DVD
TV
Wenn Sie zum Heimkino wechseln
Diskfach öffnen/schließen.
möchten, die DVD-Taste drücken.
1
4
7
2
5
8
0
3
6
Drücken Sie die Nummerntasten, um die
Optionen zu bedienen.
9
DSP /EQ
Dolby ProLogic II-Audiomodus auswählen.
Rückwärts oder vorwärts springen.
DSP/EQ-Audiomodus wählen.
In Rückwärts- oder
Vorwärtsrichtung suchen.
Diskwiedergabe unterbrechen
(Pausenmodus).
Diskwiedergabe stoppen/starten.
Ton stumm schalten.
MUTE
Automatisch nach verfügbaren
UKW-Sendern suchen und
zwischen Sendern umschalten.
Lautstärke einstellen.
TUNING
/CH
VOL
DISC MENU
TOOLS
REPEAT
MENU
Wiedergabe von Titel, Kapitel,
Track oder Disk wiederholen.
Hauptmenü (Gerätemenü) aufrufen.
Diskmenü aufrufen.
TITLE MENU
Titelmenü aufrufen.
INFO
Wiedergabe-/Untertitelsprache
einstellen, Winkel auswählen usw.
Aktuellen Diskstatus (Dateistatus)
anzeigen.
Auswahltasten: Menüoptionen und
Einstellungen auswählen; Eingabetaste:
Auswahl bestätigen.
Drücken Sie diese Taste, um das
Menü zu verlassen.
RETURN
EXIT
D
Zum vorherigen Menü zurückkehren.
Auf häufig verwendete Funktionen des
Geräts (z. B. Fotoliste) zugreifen.
A
B
C
Bassverstärker bzw. MP3-
Optimierung auswählen.
AUDIO
DIMMER
GIGA
S.VOL
UPSCALE
Helligkeit des Displays einstellen.
Ein-/Ausschalten der GIGA Sound
Funktion.
P.BASS
Lautstärke bei starker
Lautstärkeänderung regeln und
stabilisieren.
TUNER
S/W LEVEL
MEMORY
MO/ST
USB REC
Regelung der Lautstärke des
Starten der USB-Aufnahme
Subwoofers.
UKW-Sender speichern.
MONO- oder STEREO-Modus für
Radiosendungen auswählen.
Deutsch
1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 13
2011-03-05 �� 11:26:43
Erste Schritte
Batterien in die Fernbedienung einsetzen
Herstellercodes für Fernsehgeräte
* Batteriegröße: AAA
Marke
Code
Marke
Code
Admiral
56, 57, 58
MTC
NEC
18
(M.Wards)
A Mark
Anam
AOC
01, 15
18, 19, 20, 40, 59, 60
01, 02, 03, 04, 05, 06,
07, 08, 09, 10, 11,
12, 13, 14
Nikei
03
01, 18, 40, 48
Onking
Onwa
03
03
Bell & Howell
(M.Wards)
57, 58, 81
06, 07, 08, 09, 54, 66,
67, 73, 74
Brocsonic
Candle
59, 60
18
Panasonic
Penney
Philco
✎
HINWEIS
18
`
Setzen Sie die Batterien polrichtig in die
Fernbedienung ein: (+) zu (+) und (-) zu (-).
Tauschen Sie stets beide Batterien gleichzeitig aus.
Halten Sie die Batterien von Hitze und Feuer fern.
Die Fernbedienung hat eine Reichweite von bis zu ca.
7 Metern Luftlinie.
03, 15, 17, 18, 48, 54,
59, 62, 69, 90
Cetronic
03
15, 17, 18, 40, 48,
54, 62, 72
Citizen
03, 18, 25
Philips
`
`
`
Cinema
Classic
97
03
18
46
15
Pioneer
Portland
Proton
63, 66, 80, 91
15, 18, 59
Concerto
Contec
40
Quasar
06, 66, 67
Coronado
Radio Shack
RCA/
17, 48, 56, 60, 61, 75
Fernbedienung einrichten
Sie können mit dieser Fernbedienung bestimmte
Funktionen Ihres Fernsehgeräts steuern.
18, 59, 67, 76, 77, 78,
92, 93, 94
Craig
03, 05, 61, 82, 83, 84
Proscan
Realistic
Croslex
Crown
62
03
03, 19
Sampo
Samsung
Sanyo
40
00, 15, 16, 17, 40, 43, 46,
47, 48, 49,
Curtis Mates
CXC
59, 61, 63
Wenn Sie das Fernsehgerät mit der
Fernbedienung steuern
03
19, 61, 65
02, 03, 04, 15, 16, 17, 18,
19, 20, 21, 22, 23, 24, 25,
26, 27, 28, 29, 30, 32, 34,
35, 36, 48, 59, 90
1. Drücken Sie die Taste TV, um die Fernbedienung in den
TV-Modus zu setzen.
2. Drücken Sie die Taste POWER um das Fernsehgerät
einzuschalten.
3. Halten Sie die Taste POWER gedrückt, und geben Sie
den Code für die entsprechende Marke Ihres
Fernsehgeräts ein.
Daewoo
Scott
03, 40, 60, 61
Daytron
Dynasty
40
Sears
Sharp
15, 18, 19
15, 57, 64
03
Signature
03, 15, 40, 46, 59, 61,
64, 82, 83, 84, 85
Emerson
2000
57, 58
(M.Wards)
Fisher
Funai
19, 65
03
Sony
50, 51, 52, 53, 55
Soundesign
Spectricon
03, 40
01
~
Wenn in der Tabelle mehr als ein Code für Ihr
Fernsehgerät angegeben ist, geben Sie die Codes
nacheinander ein, um herauszufinden, welcher passt.
Beispiel: Für ein Samsung-Fernsehgerät
Futuretech
General
Electric (GE)
03
06, 40, 56, 59, 66,
67, 68
SSS
18
18, 40, 48, 54, 59,
60, 62
Hall Mark
40
Sylvania
~
Hitachi
Inkel
15, 18, 50, 59, 69
Symphonic
Tatung
61, 95, 96
Halten Sie die Taste POWER gedrückt, und geben
45
56, 59, 67, 86
70
06
18
Sie mit den Zifferntasten 00, 15, 16, 17 und 40 ein.
JC Penny
JVC
Techwood
Teknika
TMK
4. Wenn das Fernsehgerät ausgeschaltet wird, ist die
03, 15, 18, 25
18, 40
Einstellung abgeschlossen.
KTV
59, 61, 87, 88
03, 15, 40
15
KEC
Toshiba
Vidtech
19, 57, 63, 71
18
~
Sie können nun die Tasten TV POWER, VOLUME,
CHANNEL und die Zifferntasten verwenden .
KMC
01, 15, 16, 17, 37, 38,
39, 40, 41, 42, 43, 44
LG (Goldstar)
Luxman
Videch
Wards
Yamaha
York
59, 60, 69
15, 17, 18, 40, 48,
54, 60, 64
✎
HINWEIS
18
19, 54, 56, 59, 60, 62,
63, 65, 71
15, 17, 18, 48, 54, 59,
60, 62, 72, 89
`
Bei einigen Fernsehgerätemarken kann die
Fernbedienung eventuell nicht funktionieren oder
einige Funktionen können nicht ausgeführt werden.
Die Fernbedienung funktioniert mit allen Samsung-
Fernsehgeräten.
LXI (Sears)
Magnavox
18
40
Marantz
Matsui
MGA
Mitsubishi/
MGA
40, 54
Yupiteru
Zenith
03
58, 79
01
`
54
18, 40
Zonda
18, 40, 59, 60, 75
Dongyang
03, 54
1ꢂ
Deutsch
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 14
2011-03-05 �� 11:26:43
Anschlüsse
In diesem Kapitel werden verschiedene Möglichkeiten erläutert, das Heimkino-Gerät mit anderen externen
Komponenten zu verbinden.
Bevor Sie das Heimkino-Gerät installieren oder an einer anderen Stelle aufstellen, müssen Sie es ausschalten
und den Netzstecker ziehen.
Lautsprecher anschließen
Aufstellung des Heimkino-Geräts
Platzieren Sie das Heimkino-Gerät auf einem
SW
Regal, einer Kommode oder unter dem
Fernsehtisch.
Auswahl der Hörposition
2,5 bis 3 Mal größer als der Bildschirm
Wählen Sie Ihre Hörposition in einem Abstand
zum Fernsehgerät, welcher der 2,5 bis 3-fachen
Größe des Bildschirms entspricht.
Beispiel:
Bei einem 32-Zoll-Monitor etwa 2 - 2,4 m
Bei einem 55-Zoll-Monitor etwa 3,5 - 4 m
Platzieren Sie diese Lautsprecher vor Ihrer Hörposition, so dass sie nach innen
zeigen (in einem Winkel von ca. 45°) und auf Sie ausgerichtet sind. Platzieren Sie
die Lautsprecher so, dass die Hochtöner sich auf einer Höhe mit Ihren Ohren
Front-Lautsprecher ei
befinden. Richten Sie die Vorderseite der Front-Lautsprecher an der Vorderseite
des Center-Lautsprechers aus, oder versetzen Sie sie etwas vor die Center-
Lautsprecher.
Dieser wird am besten auf gleicher Höhe wie die Front-Lautsprecher installiert. Sie
können ihn aber auch direkt über oder unter dem Fernsehgerät installieren.
Center-Lautsprecher
f
Stellen Sie die Rücklautsprecher seitlich von Ihrer Hörposition auf. Falls
dafür der Platz nicht ausreicht, platzieren Sie die Rücklautsprecher einander
gegenüberliegend. Platzieren Sie die Rücklautsprecher 60 bis 90 cm über
Ihrem Kopf, leicht nach unten ausgerichtet.
Surround-Lautsprecherhj
Anders als die Front- und der Center-Lautsprecher sorgen die Surround-
*
Lautsprecher hauptsächlich für Klangeffekte, so dass sie nicht fortwährend
Töne wiedergeben.
Die Position des Subwoofers ist nicht wichtig. Sie können ihn beliebig platzieren.
Subwoofer
g
!
ACHTUNG
`
Achten Sie darauf, dass Kinder nicht mit den Lautsprechern oder in deren Nähe spielen. Sie können durch
umkippende Lautsprecher verletzt werden.
`
`
`
Stellen Sie beim Anschluss der Lautsprecherkabel an den Lautsprechern sicher, dass die Polarität (+/ -)
korrekt ist.
Halten Sie den Subwoofer außerhalb der Reichweite von Kindern. Verhindern Sie, dass Kinder ihre Hände
oder Fremdkörper in die Schallöffnung des Subwoofers einführen.
Hängen Sie den Subwoofer nicht an der Schallöffnung an der Wand auf.
✎
`
HINWEIS
Wenn Sie einen Lautsprecher in der Nähe des Fernsehers aufstellen, können die Bildschirmfarben aufgrund
des magnetischen Feldes, das der Lautsprecher erzeugt, gestört werden. In diesem Fall platzieren Sie den
Lautsprecher weiter vom Fernsehgerät entfernt.
Deutsch
1ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 15
2011-03-05 �� 11:26:44
Anschlüsse
Lautsprecherkomponenten
HT-D450
(L)
(R)
(L)
(R)
CENTER
FRONT
SURROUND
SUBWOOFER
LAUTSPRECHERKABEL
Lautsprecherkomponenten
Zusammengebaute Lautsprecher
HT-D453
HT-D453
(L) (R)
SCHRAUBE (5×15): 2 St.
SCHRAUBE (4×20): 8 St.
CENTER-
LAUTSPRECHER
CENTER
FRONT
STANDFUSS
(L) (R)
LS-KABEL
SUBWOOFER
SUBWOOFER
FRONT-
LAUTSPRECHER
SURROUND
LAUTSPRECHER
BODENPLATTE
SURROUND
HT-D455
HT-D455
(L) (R)
SCHRAUBE (5×15): 4 St.
SCHRAUBE (4×20): 16 St.
CENTER-
LAUTSPRECHER
FRONT
(L) (R)
STANDFUSS
CENTER
FRONT-/SURROUND-
LAUTSPRECHER
SUBWOOFER
SUBWOOFER
SURROUND
BODENPLATTE
LAUTSPRECHERKABEL
✎
`
HINWEIS
Weitere Informationen über die Tallboy-Fuß-Installation finden Sie auf Seite 17.
1ꢄ
Deutsch
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 16
2011-03-05 �� 11:27:08
Lautsprecher auf dem Tallboy-Fuß installieren
* Nur HT-D453 – Front-Lautsprecher
1
2
4
* Nur HT-D455 – Front-/Surround-Lautsprecher
1. Drehen Sie die Unterseite der Bodenplatte nach oben
und montieren Sie sie auf dem Standfuß.
Bodenplatte
Stand
2. Setzen Sie kleinen Schrauben (4*20, zum Anschließen der
Bodenplatte und Stehfuß) im Uhrzeigersinn in die vier
markierten Bohrungen mit einem Schraubenzieher wie in
3
der Abbildung gezeigt.
Lautsprecher
Stand
!
ACHTUNG : Wenn Sie einen Drehmoment-Schrauben-
dreher verwenden, achten Sie bitte darauf keine
übermäßige Kraft anzuwenden. Andernfalls kann es leer
laufen oder zu Beschädigungen kommen. (Drehmo-
ment-Schraubendreher – 15 Kgf/cm, wie unten gezeigt.
3. Befestigen Sie den zusammengebauten Standfuß am
oberen Lautsprecher.
5
4. Setzen Sie eine größere Schraube im Loch auf der
Rückseite der Lautschprecher (5*15, zum Anschließen des
Lautschprechers und Stehfuß) im Uhrzeigersinn, mithilfe
eines Schraubenziehers.
5. Dies ist das Aussehen nachdem der Lautschprecher
installiert wurde. Wiederholen Sie diesen Schritt für
die weitere Lautschprecher-Montage.
Lautsprecher anschließen (Fortsetzung)
1. Drücken Sie die Anschlusslasche an der Rückseite des Lautsprechers
herunter.
2. Führen Sie das schwarze Kabel in den schwarzen Anschluss (-) bzw. das
rote Kabel in den roten Anschluss (+) ein. Lassen Sie die Lasche dann
wieder los.
Schwarz
Rot
3. Beachten Sie beim Anschließen der Lautsprecher an der Rückseite des
Heimkino-Gerätes, dass die Farben der Stecker denen der Buchsen
entsprechen.
Für das Modell HT-D450
Center-Lautsprecher
Front-Lautsprecher (R)
Front-Lautsprecher (L)
Surround Lautsprecher (L)
Surround Lautsprecher (R)
Subwoofer
* Weitere Informationen zu den HT-D453/D455-Lautsprechern finden Sie auf Seite 16.
Deutsch
1ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 17
2011-03-05 �� 11:27:12
Anschlüsse
fernsehgerät anschließen
Wählen Sie eine von vier Methoden für den Anschluss an ein Fernsehgerät aus.
METHODE 3
SCART IN
METHODE 4 (mitgeliefert)
Grün
G
D
T
Blau
Rot
METHODE 2
METHODE 1
METHOD 1 : HDMI
Verbinden Sie den Ausgang HDMI OUT an der Rückseite des Heimkino-Geräts über ein HDMI-Kabel (nicht
mitgeliefert) mit dem HDMI-Eingang des Fernsehgeräts.
METHOD 2 : Component Video
Falls Ihr Fernsehgerät über einen Component-Videoeingang verfügt, verbinden Sie den Ausgang
COMPONENT OUT (Buchsen Y, PB und PR) an der Rückseite des Heimkino-Geräts über ein Component-
Videokabel (nicht mitgeliefert) mit den entsprechenden Buchsen des Component-Videoeingangs am
Fernsehgerät.
METHODE 3 : Scart
Falls Ihr Fernsehgerät über einen SCART-Eingang verfügt, schließen Sie der mitgelieferte Videokabel der VIDEO
OUT-Buchse an der Rückseite des Heimkino-Systems an die VIDEO-Buchse des SCART-Stecker, verbinden
Sie anschließend den SCART IN-Stecker mit dem entsprechenden SCART-IN-Buchse Ihres Fernsehgeräts.
METHOD 4 : Composite Video
Verbinden Sie mit Hilfe des beiliegenden Videokabels die VIDEO OUT (VIDEO-AUSGANGS-) Buchse an der
Rückseite des Hauptgeräts mit der VIDEO IN (VIDEO-EINGANGS-) Buchse Ihres Fernsehgeräts.
1ꢆ
Deutsch
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 18
2011-03-05 �� 11:27:13
✎
HINWEIS
`
Folgende Auflösungen sind für die HDMI-Übertragung verfügbar: 480p (576p), 720p, 1080i/1080p. Informationen
über die Auflösungseinstellung finden Sie auf Seite 23.
`
`
Über den Component/Composite-Ausgang gibt das Gerät Signale im Interlace Scan-Modus 480i (576i) aus.
Nach dem Herstellen der Videoverbindung müssen Sie an Ihrem Fernsehgerät die die Videoeingangsquelle des
Fernsehgeräts auswählen, an den Sie das Heimkino-Gerät angeschlossen haben.
Schalten Sie zuerst dieses Heimkino-Gerät ein, bevor Sie die Videoeingangsquelle an Ihrem Fernsehgerät einstellen.
Informationen, wie Sie die Videoeingangsquelle an Ihrem Fernsehgerät auswählen, finden Sie im Benutzerhandbuch
des Fernsehgeräts.
! ACHTUNG
`
Verbinden Sie das Heimkino-System nicht über einen Videorekorder. Videosignale, die über Videorekorder
empfangen werden, können durch Urheberschutzsysteme beeinträchtigt werden, wodurch das Bild am
Fernsehgerät verzerrt erscheint.
HDMI-FUNKTION
Automatische HDMI-Erkennung
Wenn Sie über ein Samsung Fernsehgerät verfügen, das die CEC-Funktion unterstützt, wird die Ausgabe des
Videosignals automatisch in den HDMI-Modus eingestellt, wenn bei eingeschaltetem Gerät ein HDMI-Kabel
angeschlossen wird.
~
~
HDMI (High Definition Multimedia Interface - Hochauflösende Multimedia-Schnittstelle)
HDMI ist eine Schnittstelle für die digitale Übertragung von Video- und Audiodaten über einen einzigen Anschluss. Das
Heimkino-Gerät liefert mit Hilfe von HDMI ein digitales Bild- und Tonsignal, das von einem Fernsehgerät mit HDMI-
Eingang in klaren Bildern wiedergegeben werden kann.
~
Beschreibung der HDMI-Verbindung
- HDMI sendet ein rein digitales Signal an das Fernsehgerät.
- Wenn das Fernsehgerät HDCP (High-bandwidth Digital Content Protection) nicht unterstützt, wird nur ein weißes
Rauschen auf dem Bildschirm angezeigt.
~
~
Was ist HDCP?
HDCP (High-bandwidth Digital Content Protection (Verschlüsselungssystem)) ist ein Kopierschutzverfahren für DVD-
Inhalte, die über HDMI ausgegeben werden. Es ermöglicht eine sichere digitale Verbindung zwischen einer Videoquelle
(PC, DVD usw.) und einem Anzeigegerät (Fernsehgerät, Projektor usw.). Der Inhalt wird im Quellgerät verschlüsselt, um
unberechtigtes Kopieren zu verhindern.
Anynet+ (HDMI-CEC) verwenden
Anynet+ ist eine Funktion, die Ihnen die Möglichkeit bietet, andere Samsung AV-Geräte mit Ihrer TV-Fernbedienung von
Samsung zu steuern. Sie können die Funktion Anynet+ verwenden, indem Sie dieses Heimkino-Gerät mit einem HDMI-
Kabel an ein Samsung Fernsehgerät anschließen. Diese Funktion ist nur verfügbar, wenn Sie ein mit Anynet+ kompatibles
SAMSUNG-Fernsehgerät verwenden.
1. Schließen Sie das Heimkino-Gerät mit einem HDMI-Kabel an ein Samsung-Fernsehgerät an. (Siehe Seite 18.)
2. Konfigurieren der Anynet+-Funktion Ihres Fernsehgeräts. (Weitere Informationen hierzu finden Sie in der
Bedienungsanleitung Ihres Fernsehgeräts.)
✎
`
HINWEIS
Einige Fernbedienungstasten werden von Anynet+ unterstützt.
`
Diese Funktion steht nicht zur Verfügung, wenn das HDMI-Kabel CEC nicht unterstützt.
Je nach Fernsehgerät stehen für den HDMI-Ausgang bestimmte Auflösungen möglicherweise nicht zur
Verfügung. Informationen dazu finden Sie in der Bedienungsanleitung Ihres Fernsehgeräts.
`
`
Überprüfen Sie, ob Ihr Fernsehgerät das Logo
wird die Anynet+-Funktion unterstützt).
aufweist (Wenn das Logo
vorhanden ist,
Deutsch
1ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 19
2011-03-05 �� 11:27:13
Anschlüsse
UKW-Antenne anschließen
UKW-Antenne (mitgeliefert)
SPEAKERS OUT
DIGITAL
AUDIO IN
OPTICAL
SURROUND
SUBWOOFER
SURROUND
1. Verbinden Sie die mitgelieferte UKW-Antenne mit dem UKW-Antennenanschluss.
2. Bewegen Sie den Antennendraht langsam hin und her, bis Sie einen guten Empfang haben. Befestigen
Sie den Draht an der Wand oder einer anderen festen Fläche.
✎
`
HINWEIS
Dieses Heimkino-Gerät empfängt keine MW-Übertragungen.
ꢀ0
Deutsch
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 20
2011-03-05 �� 11:27:13
Andere Audiogeräte anschließen
S
Weiß
Rot
D
Audiokabel (nicht mitgeliefert)
Falls das anzuschließende analoge
Gerät nur über einen Audioausgang
verfügt, schließen Sie entweder L
oder R von AUX IN 2 an.
Optisches Kabel
(nicht mitgeliefert)
Set-Top Box
OPTISCH
VIDEOREKORDER
AUX
AUX : Analoge Geräte anschließen
Ein Beispiel für eine analoge Signalkomponente ist ein Videorekorder.
1. Verbinden Sie den Eingang AUX IN (Audio) auf der Rückseite des Heimkino-Geräts mit dem
Audioausgang der externen analogen Komponente.
~
Achten Sie darauf, dass die Farben der Steckverbinder übereinstimmen.
2. Wählen Sie mit der Taste FUNCTION den Eingang AUX aus.
~
Der Modus wechselt folgendermaßen:
DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM
✎
`
HINWEIS
Sie können den Videoausgang Ihres Videorekorders mit dem Fernsehgerät und die Audioausgänge des
Videorekorders mit dem Heimkino-Gerät verbinden.
OPTISCH : Digitale Geräte anschließen
Digitale Signalkomponenten sind z. B. Set-Top-Boxen (für Kabel- oder Satellitenempfang).
1. Verbinden Sie den Eingang DIGITAL AUDIO IN (OPTICAL) auf der Rückseite des Geräts mit dem
digitalen Ausgang des anzuschließenden digitalen Geräts.
2. Wählen Sie mit der Taste FUNCTION die Option D.IN aus.
~
Der Modus wechselt folgendermaßen:
DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM
Deutsch
ꢀ1
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 21
2011-03-05 �� 11:27:14
System-Setup
Vor Inbetriebnahme des Geräts
Setup-menü einstellen
Die Schritte zur Einstellung eines Menüs sind
vom jeweiligen Menü abhängig. Die in diesem
Benutzerhandbuch dargestellte GUI (Grafische
Benutzeroberfläche) kann je nach Firmware-Version
unterschiedlich sein.
1. Schließen Sie das Gerät an das Fernsehgerät an
und drücken Sie die Taste POWER. Wenn das
Gerät das erste Mal an ein Fernsehgerät
angeschlossen ist, wird das Startmenü angezeigt.
Initial settings > On-Screen Language
1
Select a language for the on-screen displays
English
한국어
Nederlands
Français
Deutsch
Italiano
3
4
A
D
2
>
Move
"
Select
B
C
2. Wählen Sie mit den Tasten ▲▼ die gewünschte
1
TASTE MENU: Zum anzeigen des hauptmenüs.
Sprache aus, und drücken Sie die EINGABE.
3. Drücken Sie die EINGABE, um Start auszuwählen.
TASTE RETURN: Zum vorherigen Setup-Menü
2
zurückkehren.
4. Wählen Sie mit den Tasten ▲▼ das gewünschte
Fernsehbildformat aus, und drücken Sie die
EINGABE.
EINGABE und RICHTUNG
Auswahltasten: zum auswählen von einstellungen
und optionen. eingabetaste: zum bestätigen der
ausgewählten einstellung oder option.
3
4
`
Wenn das HDMI-Kabel mit dem Gerät
angeschlossen ist, steht die Funktion
Fernsehbildschirmformat nicht zur Verfügung.
TASTE EXIT: Zum verlassen des menüs.
✎
HINWEIS
`
Wenn Sie unter Ersteinstellung keine bevorzugte
Sprache eingestellt haben, wird beim nächsten
Start des Geräts ein Sprachauswahlfenster
angezeigt.
Ihre Sprachauswahl wird für alle Menüs
übernommen. Bildschirmmenü, Disk Menü,
Audio, Untertitel
Durch Drücken der Taste RETURN gelangen Sie
zurück in das vorherige Menü.
Haben Sie eine Menüsprache gewählt, können
Sie diese ändern, indem Sie die STOPP taste (@)
auf der Fernbedienung mindestens 5 Sekunden
lang gedrückt halten. Dabei darf sich keine Disk
im Gerät befinden.
Wird das Startmenü nicht auf dem Bildschirm
angezeigt, lesen Sie im Abschnitt "Ersteinstellung"
nach. (siehe Seite 26)
Einstellungen
`
`
`
Function DVD/CD
1. Drücken Sie die Taste POWER.
2. Wählen Sie mit den Tasten ◄ ► die Option,
Einstellungen und drücken Sie die EINGABE.
`
3. Wählen Sie mit den Tasten ▲▼ das gewünschte
Menü aus, und drücken Sie die EINGABE.
4. Wählen Sie mit den Tasten ▲▼ das
gewünschte Untermenü aus, und drücken Sie
die EINGABE.
5. Wählen Sie mit den Tasten ▲▼ die
gewünschte Option aus, und drücken Sie die
EINGABE.
6. Drücken Sie die Taste EXIT, um das Menü zu
verlassen.
ꢀꢀ
Deutsch
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 22
2011-03-05 �� 11:27:15
~
Aus : Die Ausgabeauflösung wird entsprechend
der vorher eingestellten Auflösung, unabhängig
von der Auflösung der Disk, beibehalten.
Display
Sie können verschiedene Displayoptionen, z. B.
Fernsehbildformat, Auflösung usw. konfigurieren.
✎
HINWEIS
`
Dadurch wird die Bildqualität entsprechend dem
Inhalt (der Disk, DVD usw.), den Sie wiedergeben
möchten, und entsprechend dem BD Wise-
kompatiblen Samsung Fernsehgerät optimiert.
Wenn Sie die Auflösung im BD Wise-Modus ändern
möchten, müssen Sie BD Wise bereits vorher auf Off
(Aus) setzen.
BD Wise wird deaktiviert, wenn das Heimkino-Gerät
an ein Gerät angeschlossen ist, das BD Wise nicht
unterstützt.
TV-Bildformat
Sie haben die Möglichkeit, die Bildschirmeinstellungen je nach Art
Ihres verwendeten Fernsehgeräts anzupassen.
`
`
~
4:3 Passend
Selbst wenn Sie ein Fernsehgerät mit
Bildformat 4:3 verwenden, können
Sie mit dieser Einstellung eine DVD
im Breitbildformat 16:9 ansehen. Die
schwarzen Bildschirmleisten oben und
unten fallen weg (dabei wird der äußere
rechte und linke Rand abgeschnitten).
Auflösung
Mit dieser Option wird die Ausgabeauflösung des HDMI-
Videosignals festgelegt. Die Zahlenangaben 480p (576p), 720p,
1080i und 1080p beziehen sich auf die Anzahl der Zeilen in
einem Videobild. Das i und das p stehen für interlace scan
(Zeilensprungverfahren) bzw. progressive scan (progressive
Abtastung).
~
~
4:3 Normal
16:9 Breit
Mit dieser Einstellung können Sie selbst
auf einem Fernsehgerät mit Bildformat
4:3 eine DVD im Breitbildformat 16:9
ansehen. Am oberen und unteren
Bildschirmrand ist dann jeweils ein
schwarzer Balken zu sehen.
~
480p(576p) : Gibt Videobilder (progressive Abtastung) mit 480
Zeilen aus.
~
~
~
~
720p : Gibt Videobilder (progressive Abtastung) mit 720 Zeilen aus.
1080i : Gibt Videobilder (Zeilensprungverfahren) mit 1080 Zeilen aus.
1080p : Gibt Videobilder (progressive Abtastung) mit 1080 Zeilen aus.
BD Wise : Bei Anschluss an das Fernsehgerät über HDMI wird mit
der Funktion BD Wise automatisch die optimale Auflösung
eingestellt. (Der Menüpunkt BD Wise erscheint nur, wenn BD Wise
auf Ein gesetzt wurde.)
Mit dieser Einstellung können Sie das
volle Breitbildformat 16:9 auf einem
Breitbildfernsehgerät sehen.
✎
`
HINWEIS
✎
HINWEIS
Bei der Verwendung von HDMI wechselt der Bildschirm
automatisch in den 16:9-Breitbildmodus und die
Funktion TV Aspect (TV-Bildformat) ist nicht aktiv.
Wenn eine DVD das 4:3-Format aufweist, können Sie
die DVD nicht im Breitbildformat anschauen.
Da DVDs mit verschiedenen Bildformaten
aufgenommen werden, unterscheidet sich die
Wiedergabe je nach Software, Fernsehgerät und
eingestelltem TV-Bildformat.
`
Bei Anschluss über Component- oder Composite-
Ausgang, wird die Auflösung auf 480i (576i) beschränkt.
Je nach Fernsehgerät erscheint 1080P möglicherweise
nicht.
`
`
`
HDMI-Format
Sie können die Farbeinstellung am HDMI-Ausgang
optimieren. Wählen Sie einen angeschlossenen
Gerätetyp aus.
~
~
BD Wise
Monitor : Bei Anschluss an einen Bildschirm über HDMI.
TV : Bei Anschluss an ein TV-Gerät über HDMI.
(Nur bei Samsung Produkten)
BD Wise ist eine neue Funktion von Samsung, die beim
Verbinden von Samsung Geräten zum Einsatz kommt.
Wenn Sie Samsung Produkte mit BD-Wise über HDMI
miteinander verbinden, wird automatisch die beste
Auflösung eingestellt.
Video Ausgangssignal
Verschiedene Länder verwenden verschiedene TV-
Standards.
Es kann zwischen NTSC und PAL ausgewählt werden.
~
~
NTSC : Sie können das NTSC-Videoformat einstellen.
PAL : Sie können das PAL-Videoformat einstellen.
~
Ein : Die Originalauflösung der DVD wird direkt
auf dem Fernsehgerät ausgegeben.
Deutsch
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 23
2011-03-05 �� 11:27:18
System-Setup
Einstellen von Bal. vorne/Surr.-Abgl.
Audio
`
Sie können einen Wert zwischen 0 und -6
auswählen.
Lautsprech Ereinstellung
`
Die Lautstärke nimmt ab, je weiter sich der Wert -6
nähert.
Lautsprechergröße
Einstellen der Lautstärke des Center/Surround/
Subwoofer Lautsprechers
Sie können in diesem Modus die Größe der Center- und
Rücklautsprecher und auch den Testton festlegen.
`
Die Lautstärke kann stufenweise von +6 dB bis
-6 dB geregelt werden.
Einstellungen
Lautsprech Ereinstellung
`
Der Ton wird lauter, je weiter sich die Einstellung +6
dB nähert und leiser, je weiter sie sich -6 dB nähert.
Lautsprechergröße
BAL vorn
▶
Verzögerun Gszeit
Verzögerungszeit
Testton
:
Aus
Wenn die Lautsprecher nicht im gleichen Abstand von
der Hörposition aufgestellt werden können, lässt sich für
die Center- und Surround-Lautsprecher eine
Verzögerung des Audiosignals einstellen.
In diesem Modus kann auch der Test Ton eingestellt
werden.
"
Wählen
'
Zurück
mBeweg.
"
Wählen
'
Zurück
~
~
~
Für die Front Lautsprecher ist der Modus auf Klein
eingestellt.
Für den Subwoofer ist der Modus auf Present
Lautsprecher-Verzögerungszeit einstellen
eingestellt.
Wenn der 5.1CH Surround Sound wiedergegeben
wird, können Sie die beste Klangqualität genießen,
wenn der Abstand zwischen Ihnen und jedem
Lautsprecher gleich groß ist.
Je nach Platzierung der Lautsprecher ist der Ton an
verschiedenen Orten im Raum zeitversetzt zu hören.
Um diese Unterschiede auszugleichen, können Sie
für den Ton des Center-und der Surround-
Für den Center- und die Surround-Lautsprecher
kann zwischen den Einstellungen Klein oder Keine
gewählt werden.
- Klein: Diese Einstellung wählen, wenn
Lautsprecher angeschlossen sind.
- Kein: Diese Einstellung wählen, wenn keine
Lautsprecher angeschlossen sind.
✎
HINWEIS
Lautsprecher einen Verzögerungseffekt einstellen.
`
Der Lautsprechermodus kann sich je nach Dolby Pro
Logic und Stereo-Einstellungen unterscheiden.
Einstellungen
Verzögerungszeit
BAL vorn
Vorderseite
Center
:
:
00mSEC
10mSEC
Sie können die Lautsprecherbalance und den
Lautsprecherpegel für jeden Lautsprecher einzeln anpassen.
Surround
Subwoofer
Testton
:
Aus
Einstellungen
BAL vorn
<
Ändern
"
Wählen
'
Zurück
Zurück
Bal. vorne
Surr.-Abgl.
dB L
dB L
R
R
dB
dB
mBeweg.
"
Wählen
'
Mittenpeg.
Anp. Surrou.
SW-Pegel
dB
dB
dB
✎
`
HINWEIS
Das Verzögerungszeitmenü ist nur dann aktiviert, wenn
eine 5.1 Kanal-Audioquelle wiedergegeben wird.
<
Ändern
Beweg.
"
Wählen
"
'
Zurück
Zurück
m
Wählen
'
`
Sie können Center und Surround in diesem Modus
nicht einstellen, wenn deren Lautsprechergröße auf
KEIN eingestellt ist.
Drücken Sie die Tasten ▲▼, um die gewünschte
Option auszuwählen und anzupassen.
Drücken Sie die Tasten ◄►, um die Einstellungen
anzupassen.
ꢀꢂ
Deutsch
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 24
2011-03-05 �� 11:27:18
Testton
Ideale Aufstellung der
Center-Lautsprecher
Einstellungen
Lautsprech Ereinstellung
Lautsprechergröße
BAL vorn
Verzögerun Gszeit
Testton
:
Ein
▶
"
Wählen
Wählen
'
Zurück
Zurück
Ideale Aufstellung
der Surround-
Lautsprecher
mBeweg.
"
'
Überprüfen Sie mit der Funktion Testton die
Lautsprecheranschlüsse.
Alle Lautsprecher sollten möglichst innerhalb dieses Kreises aufgestellt werden.
Df: Entfernung zum Front-Lautsprecher
Dc: Entfernung zum Center-Lautsprecher
Ds: Entfernung zum Surround-Lautsprecher
~
~
Wählen Sie mit den Tasten ◄► die Option Ein.
Der Testton wird in dieser Folge ausgegeben:
Vorne Links ; Center ; Vorne Rechts ;
Surround Rechts ; Surround Links ;
Center-Lautsprecher einstellen
Subwoofer
.
~
Um den Testton zu beenden, drücken Sie die
Ist die Entfernung Dc gleich oder länger als die
Entfernung Df in der Abbildung, stellen Sie den Modus
auf 0 ms.Andernfalls ändern Sie die Einstellung laut
Tabelle.
EINGABE.
DRC (Dynamic Range Compression)
Df um ...
Mit dieser Funktion wird der Bereich zwischen
größter und kleinster Lautstärke geregelt. Mithilfe
dieser Funktion kommen Sie auch dann in den
Genuss von Dolby Digital Sound, wenn Sie sich spät
abends Filme mit niedriger Lautstärke ansehen.
größer als 0,00m 0,34m 0,68m 1,06m 1,40m 1,76m
Dc
Verzöge-
rungszeit
00 ms 01 ms 02 ms 03 ms 04 ms 05 ms
~
Sie können entweder Voll, 6/8, 4/8, 2/8 oder Aus
auswählen
Einstellen der Surround-Lautsprecher
AUDIO-SyNC
Ist die Entfernung Dc gleich oder größer als die
Entfernung Ds in der Abbildung, stellen Sie den Modus
auf 0 ms.
In Verbindung mit einem Digitalfernseher stimmt die
Ton-Bild-Synchronisation möglicherweise nicht.
Passen Sie in diesem Fall die Audio-Verzögerungszeit
an, so dass der Ton zum Bild passt.
Andernfalls ändern Sie die Einstellung laut Tabelle.
Ds um ...
~
Sie können eine Audio-Verzögerungszeit zwischen
0 ms und 300 ms einstellen. Stellen Sie die Audio-
Verzögerungszeit auf den optimalen Status.
größer als
Dc
0.00m 1.06m 2.11m 3.16m 3.62m 5.29m
00 ms 03 ms 06 ms 09 ms 12 ms 15 ms
Verzöge-
rungszeit
HDMI AUDIO
Sie können einstellen, ob der Ton über das HDMI-
✎
HINWEIS
Kabel übertragen wird oder nicht.
`
Bei
PL II (Dolby Pro Logic II), kann u. U. die
~
~
Aus : Es wird nur das Videosignal über das HDMI-
Verbindungskabel gesendet. Die Audioausgabe
erfolgt ausschließlich über die Lautsprecher des
Heimkino-Geräts.
Verzögerungszeit für jeden Modus verschieden sein.
Bei AC-3 und DTS kann die Verzögerungszeit auf
Werte zwischen 00 und 15 ms eingestellt werden.
Der Center-Kanal kann nur bei Disks mit 5.1-
Sound angepasst werden.
`
`
Ein: Sowohl Video- als auch Audiosignale werden über das
HDMI-Verbindungskabel gesendet. Die Audioausgabe
erfolgt nur über die Lautsprecher Ihres TV-Geräts.
Deutsch
ꢀꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 25
2011-03-05 �� 11:27:19
System-Setup
✎
HINWEIS
System
`
Die Standardeinstellung dieser Funktion ist HDMI Audio
Aus.
Ersteinstellung
Mithilfe der Werkeinstellungen, können Sie Sprache und
Fernsehbildformat einstellen.
`
`
`
HDMI Audio wird automatisch als 2-Kanalton für die TV-
Lautsprecher abgemischt.
Wenn HDMI AUDIO auf Ein gesetzt ist, funktionieren PL
II /DSP EQ /P.BASS nicht.
Wenn HDMI AUDIO auf 'Ein' gestellt ist, kann
die Lautstärke nur über die Fernbedienung des
Fernsehers geregelt werden.
✎
`
HINWEIS
Wenn das HDMI-Kabel an das Heimkino-Gerät
angeschlossen ist, steht das Fernsehbildformat
nicht zur Verfügung und wird automatisch auf
16:9 eingestellt.
Benutzer-EQ
Sie können die Equilizereinstellungen an Ihre
Vorlieben anpassen.
DivX(R)-Registrierung
Zeigen Sie den DivX(R) VOD-Registrierungscode an, um
DivX(R) VOD-Inhalte zu erwerben und wiederzugeben.
Einstellungen
Benutzer-EQ
dB
6
·
·
HINWEIS
✎
·
·
·
·
`
Diese Option wird nicht aktiviert, wenn Sie OK
auswählen. Um diese Option zu aktivieren,
müssen Sie DivX(R)-Deaktivierung aktivieren.
Auch wenn Sie das System zurücksetzen, geht
die DivX Registrierung nicht verloren.
·
·
·
·
·
·
-6
250Hz 600Hz 1kHz
Zurücks.
3kHz
6kHz 10kHz 15kHz
`
a
>
Einst.
<
"
Beweg.
Wählen
'
Zurück
Zurück
m
Beweg.
'
DivX(R) Deaktivierung
✎
`
HINWEIS
Wählen Sie diese Option, um einen neuen
Registriercode zu erhalten.
Die Einstellungen können ebenfalls mit Hilfe der
DSP/EQ Taste vorgenommen werden.
(Siehe Seite 34)
Audioausgabekanal
Um den Ton des Fernsehgeräts über die Heimkino
Lautsprecher genießen zu können, benötigen Sie nur
ein HDMI-Kabel.
~
~
Aus : Schaltet den Audioausgabekanal aus.
Auto : Wenn Ihr Fernsehgerät mit der
Audioausgabekanal Funktion kompatibel ist, hören
Sie den Ton des Fernsehgeräts über die
Heimkinolautsprecher.
HINWEIS
✎
`
Wenn Anynet+ (HDMI-CEC) auf Aus eingestellt
ist, steht die Audioausgabekanal Funktion nicht
zur Verfügung.
`
Wenn Sie ein HDMI-Kabel ohne ARC (Audio
Return Channel) Zertifikat verwenden (ohne
Unterstützung der Audioausgabekanal
Funktion) kann dies zu
Kompatibilitätsproblemen führen.
Die ARC-Funktion ist nur verfügbar, wenn ein
ARC-fähiges Fernsehgerät angeschlossen ist.
`
ꢀꢄ
Deutsch
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 26
2011-03-05 �� 11:27:19
Passwort ändern
Sprache
Wählen Sie Ändern and geben Sie mit den Zifferntasten
der Fernbedienung ein 4stelliges Passwort ein.
Sie können die Sprache auswählen, in der das
Bildschirmmenü, Diskmenü usw. angezeigt werden soll.
Einstellungen
Wählen Sie eine Sprache für die
Anzeige
Sicherungsstufe : Aus
OSD-Sprache
Textanzeige.
Audio
Passwort
: Ändern
▶
System
Wählen Sie eine Sprache für das
Diskmenü.
Wählen Sie eine Sprache für die
Wiedergabe der Disk.
Sprache
Sicherheit
Unterstützung
Disc-Menü
Audio
Wählen Sie eine Sprache für die
Untertitel der Disk.
mBeweg.
"
Wählen
'
Zurück
Untertitel
Falls Sie Ihr Passwort vergessen haben
a
a
Um eine nicht im Menü angezeigte Sprache
einzustellen, wählen Sie für die Option Disc-Menü,
Audio oder Untertitel die Einstellung Others (Andere)
und geben den Sprachcode der gewünschten
Sprache ein (siehe Seite 38).
Die Einstellung Others (Andere) steht für OSD-Sprache
nicht zur Verfügung.
1. Nehmen Sie die Disk aus dem Gerät.
2. Halten Sie die STOPP taste (@) auf der
Fernbedienung 5 Sekunden oder länger gedrückt.
Alle Einstellungen werden auf die werkseitigen
Standardeinstellungen zurückgesetzt.
✎
`
HINWEIS
Unterstützung
Die ausgewählte Sprache wird nur dann
verwendet, wenn sie von der Disk unterstützt wird.
Produktinformationen
Zum Anzeigen der Produktinformationen z.B.
Modellcode, Softwareversion usw.
Sicherheit
Die Kindersicherung (Parental Lock) funktioniert in Verbindung
mit DVDs, denen eine bestimmte Alterseinstufung zugewiesen
wurde. Dies hilft Ihnen, die Kontrolle über die Art der Filme zu
behalten, die sich Ihre Familie ansieht. Das Bewertungssystem
umfasst 8 verschiedene Stufen.
Sicherungsstufe
Wählen Sie die Sicherungsstufe aus, die Sie einstellen
möchten. Je höher die Stufe, desto schärfer ist die
Alterseinstufung Wenn Sie beispielsweise Stufe 6
auswählen, werden Disks mit Stufe 7 und 8 nicht
wiedergegeben.
Geben Sie das Kennwort ein, und drücken Sie die
EINGABE.
- Die Standardeinstellung für das Kennwort ist „0000“.
- Sobald die Einstellungen abgeschlossen sind, wird
wieder der vorherige Bildschirm angezeigt.
Deutsch
ꢀꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 27
2011-03-05 �� 11:27:19
Grundfunktionen
Disk wiedergeben
Audio-CDs und mP3/WmA-CDs wiedergeben
1. Drücken Sie die Taste ÖFFNEN/SCHLIESSEN (^).
BA
2. Legen Sie vorsichtig eine Disk mit der
bedruckten Seite nach oben ein.
3. Drücken Sie die Taste ÖFFNEN/SCHLIESSEN
Track01
1/17
(^), um das Diskfach zu schließen.
✎
HINWEIS
`
Fortsetzungsfunktion: Wenn Sie die Wiedergabe
anhalten, speichert das Gerät die aktuelle Disk-
Position. Durch erneutes Drücken der
0:15
/
3:59
WIEDERGABE wird die Wiedergabe an dieser
Stelle fortgesetzt. (Diese Funktion ist nur bei DVDs
verfügbar.) Drücken Sie während der Wiedergabe
die STOPP taste zweimal, um die
Function DVD/CD
Repeat Wdg.-Modus
1. Legen Sie eine Audio-CD (CD-DA) oder eine MP3-
Fortsetzungsfunktion zu deaktivieren.
Disk in das Diskfach ein.
`
Wenn sich das Gerät im Pause-Modus befindet
und länger als 3 Minuten am Heimkino-Gerät
oder auf der Fernbedienung keine Taste gedrückt
wird, wird in den STOPP-Modus gewechselt.
Der Startbildschirm richtet sich nach dem
Diskinhalt und mag unterschiedlich erscheinen.
Raubkopien werden mit diesem Gerät nicht
wiedergegeben, weil dadurch die CSS-Vorgaben
(Content Scrambling System: ein
~
Von einer Audio-CD wird der erste Titel
automatisch abgespielt.
- Drücken Sie die Tasten [], um zum
vorigen/nächsten Titel zu gelangen.
`
`
~
Bei einer MP3/WMA-Disk wählen Sie mit den
Tasten ◄► die Option Musik, dann drücken
Sie die EINGABE.
- Wählen Sie mit den Tasten ▲▼◄► die
gewünschte Datei aus, und drücken Sie
die EINGABE.
- Drücken Sie die Tasten(), um zu den
vorherigen/nächsten Seiten zu gelangen.
Kopierschutzsystem) verletzt werden.
aDas Symbol zeigt einen ungültigen
Tastendruck an.
TV-Bildschirmschoner/Energiesparfunktion
2. Drücken Sie die STOPP (@), um die Wiedergabe zu
beenden.
~
Wenn im Stop- oder Wiedergabemodus für mehr
als 5 Minuten keine Taste betätigt wird, wird der
Bildschirmschoner eingeschaltet.
Wenn sich der Player länger als 20 Minuten im
Bildschirmschonermodus befindet, wird er
automatisch ausgeschaltet. (Außer bei
Musikwiedergabe)
✎
HINWEIS
`
Je nach Aufnahmemodus können manche MP3-/
WMA-CDs möglicherweise nicht wiedergegeben
werden.
Das Inhaltsverzeichnis einer MP3-CD hängt vom
Format der aufgenommenen MP3-/WMA-Titel ab.
~
`
`
WMA-DRM-Dateien werden nicht wiedergegeben.
ꢀꢆ
Deutsch
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 28
2011-03-05 �� 11:27:19
JPEG-Dateien wiedergeben
Wiedergabefunktion verwenden
Mit einer digitalen Kamera oder einem Camcorder
aufgenommene Bilder oder JPEG-Dateien von einem
Computer können auf einer CD gespeichert werden und
anschließend mit dem Heimkino-Gerät wiedergegeben
werden.
Suchlauf vorwärts/rückwärts
dBAD
1. Legen Sie eine JPEG-Disk in das Diskfach ein.
Drücken Sie die Tasten () für die Suchfunktion.
2. Wählen Sie mit den Tasten ◄► die Option Foto
aus, und drücken Sie dann die EINGABE.
( 1 ➞ ( 2 ➞ ( 3 ➞ ( 4
) 1 ➞ ) 2 ➞ ) 3 ➞ ) 4
3. Wählen Sie mit den Tasten ▲▼ den
gewünschten Ordner für die Wiedergabe aus,
und drücken Sie dann die EINGABE.
✎
`
HINWEIS
Im Suchmodus erfolgt keine Tonwiedergabe.
4. Wählen Sie mit den Tasten ▲▼ das
gewünschte Foto für die Wiedergabe aus, und
drücken Sie dann die EINGABE
.
`
Während des Bildsuchlaufs wird der Ton nur bei
den Suchgeschwindigkeiten )1 und )2
wiedergegeben.
~
~
~
Die ausgewählte Datei wird wiedergegeben
und die Diashow startet.
Um die Diashow anzuhalten, drücken Sie die
PAUSE (#).
Sie können die vorherige/nächstei Datei
sehen, indem Sie im Diashowmodus die
Tasten ◄,► drücken.
`
Diese Funktion steht nur für Digital Audio CDs zur
Verfügung.
Überspringen von Szenen/Liedern
ROOT
JPEG 1
JPEG 2
JPEG 3
dBAD
Drücken Sie die Tasten [].
~
Bei jedem Drücken der Taste während der
Wiedergabe wird das vorherige/nächste Kapitel
oder Verzeichnis (Datei) bzw. der vorherige/
nächste Titel abgespielt.
642 X 352
2010/01/01
Function DVD/CD
Seite
Zurück
~
Ein aufeinanderfolgendes Überspringen von
Kapiteln ist nicht möglich.
Rotationsfunktion
Wiedergabe in Zeitlupe
G
dD
Drücken Sie im Pausenmodus die Taste GRÜN (B) oder
GELB (C).
Drücken Sie die PAUSE (#) und danach die Taste
) für die Zeitlupenwiedergabe.
~
~
Taste GRÜN (B): Drehen Sie das Bild 90° gegen
den Uhrzeigersinn
ꢀ
d
D
Taste GELB (C): Drehen Sie das Bild 90° im
Uhrzeigersinn.
*1 ➞*2 ➞*3
✎
HINWEIS
`
Die vom Gerät unterstützte maximale
Auflösung beträgt 5120 x 3480 (oder 19,0
MPixel) für Dateien mit JPEG-Standard und
2048 x 1536 (oder 3,0 MPixel) für progressive
Bilddateien.
✎
`
HINWEIS
Im Zeitlupenmodus erfolgt keine Tonwiedergabe.
`
Zeitlupenwiedergabe rückwärts ist nicht möglich.
Deutsch
ꢀꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 29
2011-03-05 �� 11:27:20
Grundfunktionen
Einzelbildwiedergabe
Titelmenü verwenden
dD
d
Bei DVDs mit mehreren Titeln werden alle Filmtitel
angezeigt.
Drücken Sie wiederholt die PAUSE.
~
Jedes Mal, wenn Sie während der Wiedergabe
diese Taste drücken, wird das jeweils nächste
Einzelbild angezeigt.
1. Drücken Sie während der
TITLE MENU
Wiedergabe die Taste TITLE MENU
auf der Fernbedienung.
✎
`
HINWEIS
2. Wählen Sie mit den Tasten ▲▼◄►
die gewünschte Option aus, und
drücken Sie die EINGABE.
Bei der Einzelbildwiedergabe erfolgt keine
Tonwiedergabe.
✎
HINWEIS
`
Die Menüeinstellungspunkte können je nach Disk
variieren. Möglicherweise ist dieses Menü nicht
verfügbar.
D
Funktion 5-Minuten-Sprung
Drücken Sie während der Wiedergabe die Taste ◄,►.
~
Bei jedem Drücken der Taste ►, macht die
Wiedergabe einen 5-Minuten-Sprung vorwärts.
Wiedergabe wiederholen
~
Bei jedem Drücken der Taste
◄, macht die
Wiedergabe einen 5-Minuten-Sprung rückwärts.
dBAD
✎
`
HINWEIS
DVD/DivX wiederholen
Diese Funktion steht nur für DivX zur Verfügung,
die eine Zeitinformation beinhalten.
Sie können einen Titel, ein Kapitel oder einen Abschnitt
(A-B-Wiederholen) einer DVD/DivX wiederholen.
Wiederhol. AUS
Diskmenü verwenden
d
Sie können die Menüs für die Wiedergabesprache,
Untertitelsprache, Profile usw. anzeigen.
REPEAT
1. Drücken Sie während der DVD/DivX-
DISC MENU
Wiedergabe die Taste REPEAT auf der
1. Drücken Sie während der
Fernbedienung.
Wiedergabe die Taste DISC MENU
auf der Fernbedienung.
2. Wählen Sie mit den Tasten ▲▼ den
gewünschten Wiederholmodus aus,
und drücken Sie die EINGABE.
2. Wählen Sie mit den Tasten ▲▼◄►
die gewünschte Option aus, und
drücken Sie die EINGABE.
3. Wählen Sie mit den Tasten ▲▼ AUS aus, um
den Wiederholmodus wieder auszuschalten,
und drücken Sie danach die EINGABE.
✎
`
HINWEIS
Die Menüeinstellungspunkte können je nach Disk
variieren. Möglicherweise ist dieses Menü nicht
verfügbar.
Titel ➞ Kapitel ➞ A - ➞ Aus
Z
D
Titel
➞
Ordner
➞
Alle
➞
Aus
ꢁ0
Deutsch
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 30
2011-03-05 �� 11:27:20
CD/MP3 wiederholen
Anzeige von Diskinformationen
1. Drücken Sie während der CD/ MP3-
Wiedergabe wiederholt die Taste REPEAT, um
den gewünschten Wiederholmodus
auszuwählen.
dD
1/1
;
;
;
;
2/20
0:05:21
1/1 EN AC3 5.1
1/1 EN
1/1
(Wiederholung Aus ; Disk wiederholen ; Alle
B
A
wiederholen ; Zufallswiedergabe ; Abschnitt
A-B wiederholen
)
Ändern
Wählen
;
;
;
;
(
Wiederholung Aus ; Titel wiederholen ;
Verz. wiederholen (Verzeichnis) ; Alle
wiederholen ; Zufallswiedergabe)
D
Abschnitt A-B festlegen und
wiederholen
1/6
1/1
1/1 EN
Ändern
Wählen
dB
Sie können einen Abschnitt auf einer DVD oder CD
festlegen und wiederholt wiedergeben.
1. Drücken Sie während der Wiedergabe einer
DVD oder CD die Taste REPEAT auf der
Fernbedienung.
1. Drücken Sie während der
TOOLS
Wiedergabe die Taste TOOLS auf
2. Drücken Sie bei DVDs die Tasten ▲▼ um A-
der Fernbedienung.
auszuwählen. Drücken Sie bei CDs wiederholt die
Taste REPEAT bis das Symbol
erscheint.
2. Wählen Sie mit den Tasten ▲▼ den
gewünschten Menüpunkt.
3. Drücken Sie die EINGABE, um den Punkt zu
markieren, an dem die Wiederholung starten soll
(A).
3. Wählen Sie mit den Tasten ◄► die
gewünschte Einstellung, und drücken Sie
anschließend die EINGABE.
4. Drücken Sie die EINGABE, um den Punkt zu
markieren, an dem die Wiederholung stoppen
soll (B).
- Sie können mit den Zifferntasten auf der
Fernbedienung einige Optionen steuern.
4. Drücken Sie die Taste TOOLS erneut, um
Diskinformation auszublenden.
5. Um zur normalen Wiedergabe zurückzukehren,
drücken Sie bei DVDs die Tasten ▲▼ um AUS
auszuwählen. Bei CDs drücken Sie die Taste
✎
HINWEIS
REPEAT, um
auszuwählen.
`
Wenn Sie Inhalte über das Tools-Menü abspielen, sind
abhängig vom Datenträger manche Funktionen
möglicherweise nicht verfügbar.
Je nach Art der Disk können Sie auch DTS, Dolby
Digital oder Pro Logic auswählen.
Einige Tools-Menüs können sich je nach Disks und
Dateien unterscheiden.
✎
`
HINWEIS
`
`
Die A-B-Wiederholungsfunktion steht nicht bei
DivX-, MP3- oder JPEG-Disks zur Verfügung.
Deutsch
ꢁ1
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 31
2011-03-05 �� 11:27:23
Grundfunktionen
3. Wählen Sie mit den _+ Tasten die gewünschte
TOOLS-Menü
Untertitelsprache aus.
`
Titel (
): Zum Auswählen des gewünschten
~
Je nachdem, welche Sprachen auf einer DVD
zur Verfügung stehen, wird bei jedem
Drücken der Taste eine andere
Titels auf einem Datenträger, auf dem sich
mehrere Titel befinden. Zum Beispiel: wenn sich
mehr als ein Film auf einer DVD befindet, wird
jeder Film als Titel erkannt.
Untertitelsprache ausgewählt.
`
`
Kapitel (
): DVDs werden meistens
kapitelweise aufgenommen. So können bestimmte
Kapitel leicht gefunden werden.
✎
`
HINWEIS
Die Funktion zur Auswahl von Wiedergabe- und
Untertitelsprache ist möglicherweise nicht bei
allen Disktypen verfügbar.
Wiedergabezeitpunkt (
): Ermöglicht die
Wiedergabe eines Films ab einer bestimmten
Stelle (Wiedergabezeitpunkt). Sie müssen die
gewünschte Startzeit als Referenz eingeben. Bei
einigen Datenträgern funktioniert die zeitbezogene
Suchfunktion nicht.
Untertitelfunktion
D
`
`
Audio (
): Zeigt den Soundtrack
~
~
Für die ordnungsgemäße Verwendung dieser
(Wiedergabesprache) des Films an. Eine DVD kann
bis zu 8 verschiedene Audiosprachen enthalten.
Funktion müssen Sie über Erfahrung in der
Videoextraktion und -bearbeitung verfügen.
Untertitel (
): Zeigt die auf der Disk
Speichern Sie für die Verwendung der
Untertitelfunktion die Untertiteldatei (*.smi) mit dem
gleichen Dateinamen wie die DivX-Datei (*.avi) im
gleichen Ordner ab.
verfügbaren Untertitelsprachen an. Sie können
eine Sprache auswählen oder die Untertitel vom
Bildschirm ausblenden. Eine DVD kann bis zu 32
verschiedene Untertitelsprachen enthalten.
Beispiel. Hauptverzeichnis Samsung_007CD1.avi
`
Winkel (
): Wenn eine Szene einer DVD
Samsung_007CD1.smi
aus mehreren Kamerawinkeln aufgenommen
wurde, können Sie diese mit der Winkel-Funktion
auswählen.
~
~
Der Dateiname für die Untertiteldatei kann aus bis
zu 100 alphanumerischen oder 50 ostasiatischen
Zeichen (2-Byte-Zeichen, wie in Koreanisch und
Chinesisch) bestehen.
Die Untertitel von DivX-Dateien sind: *.smi, *.sub,
*.srt, über 148 kbyte wird nicht unterstützt.
Wiedergabesprache wählen
dD
Winkel-Funktion
1. Drücken Sie die Taste TOOLS.
2. Wählen Sie mit den Tasten ▲▼ AUDIO (
)
aus.
d
3. Mit Hilfe der _+ Tasten Sie die gewünschte
Mit dieser Funktion können Sie dieselbe Szene aus
verschiedenen Winkeln ansehen.
1. Drücken Sie die Taste TOOLS.
Audiosprache einstellen.
~
Je nachdem, welche Sprachen auf einer DVD
zur Verfügung stehen, wird bei jedem
Drücken der Taste eine andere Audio-
Sprache ausgewählt.
2. Wählen Sie mit den Tasten ▲▼ WINKEL
(
) aus.
3. Wählen Sie mit Hilfe der _+ Tasten den
gewünschten Winkel aus.
Untertitelsprache wählen
✎
`
HINWEIS
Diese Funktion steht nur für Disks mit Multi-
Winkel-Aufnahmen zur Verfügung.
dD
1. Drücken Sie die Taste TOOLS.
2. Wählen Sie mit den Tasten ▲▼
UNTERTITEL
(
) aus.
ꢁꢀ
Deutsch
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 32
2011-03-05 �� 11:27:23
SLEEP
GIGA
Es kann die Zeit eingestellt werden, nach der sich
das Gerät automatisch ausschaltet.
Die GIGA Sound Funktion verstärkt den Bass und verdoppelt
ihn, damit Sie einen kraftvollen, realitätsnahen Klang zu
erleben können.
Drücken Sie die Taste SLEEP.
Die GIGA Sound Funktion betrifft nur die Klangwiedergabe
über den Subwoofer.
~
Durch wiederholtes Drücken der Taste
ändert sich die Auswahl wie folgt:
Drücken Sie die GIGA Taste.
SLP 10
SLP 90
SLP 20
SLP 30
SLP 60
OFF.
SLP 120
SLP 150
✎
`
HINWEIS
Wenn GIGA Sound auf 'Ein' gestellt ist, stehen
andere Klangeffekte nicht zur Verfügung.
DIMMER
Mit dieser Funktion können Sie die
Helligkeit des Displays einstellen.
`
`
Wenn DOLBY PLII auf 'Ein' gestellt ist, steht der
GIGA Klangeffekt nicht zur Verfügung.
GIGA Sound funktioniert nur im Stereo LPCM
Modus.
Drücken Sie die Taste DIMMER.
Tonmodus
S.VOL (INTELLIGENTE LAUTSTÄRKE)
P.BASS
Durch diese Funktion wird die Lautstärke bei einer
drastischen Lautstärkeänderung, z. B. durch das
Umschalten auf einen anderen Kanal oder durch
Mit der Funktion P.BASS können tiefe Töne bzw.
niedrige Frequenzen verstärkt werden.
einen Szenenwechsel, geregelt und
S . VOL
Die Funktion MP3 ENHANCE (MP3 optimieren) bietet
bessere Klangqualität, indem die
Sampling-Frequenz angehoben wird.
stabilisiert.
Drücken Sie die Taste S.VOL.
Drücken Sie die Taste P.BASS.
~
Durch wiederholtes Drücken der Taste
ändert sich die Einstellung wie folgt:
POWER BASS ON
➞
2-Kanal LPCM-
Quelle
SMART VOLUME ON SMART VOLUME OFF
POWER BASS OFF
MP3 ENHANCE ON ➞
POWER BASS ON ➞
POWER BASS OFF
MP3-Datei
S/W PEGEL
Sie können ebenfalls die S/W LEVEL Taste auf der
Fernbedienung drücken und mit Hilfe der _ oder +
Taste den Pegel des Subwoofers
einstellen.
✎
`
HINWEIS
Die Funktion P.BASS ist nur bei 2-Kanal-LPCM-
Datenquellen wie MP3, DivX, CD oder WMA
verfügbar.
`
Die P.BASS Funktion kann nicht zusammen mit
dem GIGA SOUND oder Dolby Pro Logic II
Modus aktiviert werden.
Drücken Sie die S/W LEVEL Taste.
Wenn Sie im DSP/EQ-Modus P.BASS drücken,
wird der DSP/EQ-Modus automatisch beendet
und die Funktion P.BASS aktiviert.
Die Funktion MP3 ENHANCE (MP3 optimieren) ist
nur für MP3-Dateien verfügbar.
`
Deutsch
ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 33
2011-03-05 �� 11:27:24
Grundfunktionen
DSP (Digital Signal Processor)/EQ
Dolby Pro Logic II-Modus
~
DSP (Digital Signal Processor): Mit DSP-Modi
können verschiedene akustische Umgebungen
simuliert werden.
Sie können den gewünschten Dolby Pro
Logic II-Audiomodus auswählen.
Drücken Sie die Taste
PL II.
~
EQ : Sie können zwischen POPS, JAZZ, ROCK oder
USER (BENUTZER) auswählen, um den Ton an das
wiedergegebene Musikgenre anzupassen.
DSP /EQ
Gibt Klangeffekte beim Musikhören so
MUSIC
MOVIE
wieder, als wären Sie bei einer Vorstellung.
Drücken Sie die Taste DSP/EQ.
Für eine besonders wirklichkeitsnahe
Tonwiedergabe bei Filmen.
POPS,
JAZZ,
ROCK
Sie können eine 2-Kanal-Tonquelle in
5.1CH Surround Sound mit allen
aktivierten Lautsprechern zuhören.
Abhängig vom Musikgenre können Sie
POPS, JAZZ oder ROCK auswählen.
PROLOG
- Ein bestimmter Lautsprecher kann je
nach dem Eingangssignal
möglicherweise nicht ausgegeben
werden.
Sie können den Klang, mit dem Sie Musik
genießen wollen unter "EQ:USER"
einstellen.
USER
Wenn Sie im Menü "EQ:USER"
Eingabetaste drücken, erscheint ein
Fenster, in dem Sie die EQ Einstellungen
an Ihre Vorlieben anpassen können.
MATRIX
STEREO
Liefert Mehrkanal-Surround-Sound.
Die Wiedergabe erfolgt nur über den
vorderen linken und rechten Lautsprecher
sowie über den Subwoofer.
Vermittelt den Klangeindruck eines
Studios.
STUDIO
Simuliert den Sound eines Danceclubs
mit einem schlagenden Bass-Beat.
✎
HINWEIS
CLUB
HALL
`
Wenn Sie den Modus Pro Logic II verwenden
möchten, schließen Sie Ihr externes Gerät an die
Buchsen L und R des Audioeingangs am
Heimkino-Gerät an. Wenn Sie die Verbindung nur
über eine Buchse (L oder R) herstellen, hören Sie
keinen Raumklang.
Die Funktion Pro Logic II steht nur im Stereo-
Modus zur Verfügung.
Die Pro Logic II Funktion steht bei der
Wiedergabe von AC3 Signalen im 2.1
Kanalmodus nicht zur Verfügung.
Bietet eine helle Klangstimme wie in
einer Konzerthalle.
Bietet das Gefühl als wäre man im Kino
anwesend.
MOVIE
CHURCH
OFF
Vermittelt den Eindruck, in einer
großen Kirche zu sein.
`
`
Zum Auswählen für normalen Klang.
✎
`
HINWEIS
Die DSP/EQ Funktion steht nur im Stereo
Modus zur Verfügung.
`
Die DSP/EQ Funktion steht bei der Wiedergabe
von AC3 Signalen im 2.1 Kanalmodus nicht zur
Verfügung.
ꢁꢂ
Deutsch
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 34
2011-03-05 �� 11:27:24
5. Drücken Sie die Taste TUNER MEMORy erneut.
Radio hören
~
Drücken Sie die Taste TUNER MEMORy,
solange der Programmplatz noch im Display
angezeigt wird.
Mithilfe der Tasten auf der Fernbedienung
~
Dann wird die Anzeige des Programmplatzes im
Display ausgeblendet und der Sender ist
gespeichert.
1. Wählen Sie mit der Taste FUNCTION die Option
FM aus.
2. Stellen Sie den gewünschten Sender ein.
6. Wiederholen Sie für die Programmierung weiterer
~
Gespeicherter Sender 1 : Sie müssen zuerst
die Frequenz des gewünschten Senders
speichern. Drücken Sie die STOPP (@) Taste,
um PRESET auszuwählen und anschließend
die TUNING/CH
) Taste, um den voreingestellten Sender
auszuwählen.
Sender die Schritte 2 bis 5.
(
~
~
Manuelle Sendersuche : Drücken Sie die
STOPP (@) Taste, um MANUAL auszuwählen
und anschließend die TUNING/CH (
)
Taste, um einen auf einer höheren oder
niedrigeren Frequenz ausgestrahlten Sender
auszuwählen.
Automatische Sendersuche : Drücken Sie die
STOPP (@) Taste, um MANUAL auszuwählen
und anschließend die TUNING/CH (
)
Taste, um das Frequenzband automatisch zu
durchsuchen.
Einstellen des Mono/Stereo-Modus
Drücken die Taste MO/ST.
~
~
Bei jedem Drücken der Taste wird der
Klang zwischen STEREO und MONO
umgeschaltet.
An Orten mit geringer Empfangsleistung wählen Sie
MONO für einen klaren, rauschfreien Empfang.
Sender programmieren
Beispiel: UKW-Frequenz 89.10 speichern.
1. Wählen Sie mit der Taste FUNCTION die Option
FM aus.
2. Stellen Sie mit den Tasten TUNING/CH (
Frequenz <89.10> ein.
) die
3. Drücken Sie die Taste TUNER
MEMORy.
~
Eine Zahl blinkt auf dem Display.
4. Drücken Sie die Tasten TUNING/CH
), um den Programmplatz für die
Speicherung auszuwählen.
Sie können bis zu 15 Sender speichern.
(
~
Deutsch
ꢁꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 35
2011-03-05 �� 11:27:26
Zusatzfunktionen
USB-funktion
USB Aufnahme
Während Sie CD-DA (Compact Disc Digital Audio) abspielen,
einen UKW-Sender hören oder Audiosignale über ein externes
Gerät empfangen, können Sie die Audioquelle mit Hilfe der
USB Aufnahme Funktion auf einem USB-Speicher speichern.
Mediendateien über den USB-
Host-Anschluss wiedergeben
Sie können Mediendateien wie Bilder, Filme und
Musik, die Sie auf einem MP3-Player, einem USB-
Speichergerät oder einer Digitalkamera gespeichert
haben, mit dem Heimkino-Gerät in guter Qualität
wiedergeben. Verbinden Sie dafür das
Speichermedium mit dem USB-Anschluss des
Heimkino-Systems.
Beisp.: USB-Aufnahme einer Audio-CD-DA
1. Schließen Sie das USB-Gerät an Ihr Gerät an.
2. Legen Sie die Audio-CD in die CD-Lade ein.
3. Drücken Sie die USB REC Taste auf der
Fernbedienung.
~
Um den aktuellen Titel zu kopieren, die
Taste REC auf der Fernbedienung
drücken, während das System gerade ein
Lied wiedergibt oder vorübergehend gestoppt wurde.
~
Um alle Titel auf der CD zu kopieren, die USB REC
Taste auf der Fernbedienung gedrückt halten.
- Es wird "FULL CD RIPPING" auf dem Display
angezeigt und die Aufnahme startet.
4. Drücken Sie die Taste STOPP (@) Taste, um die
Aufnahme zu beenden.
~
Wenn die USB Aufnahme einer CD abgeschlossen ist,
erscheint ein neuer Ordner mit dem Namen
"RECORDING" auf dem USB-Laufwerk. Der Inhalt
wird im MP3-Format in dem Ordner gespeichert.
1. Schließen Sie das USB-Gerät an den USB-
Anschluss an der Vorderseite des Heimkino-
Systems an.
~
Wenn die USB Aufnahme einer Radiosendung oder
über den AUX-Anschluss abgeschlossen ist, erscheint
ein neuer Ordner mit dem Namen "TUNER
RECORDING" bzw. "AUX RECORDING" auf dem
USB-Laufwerk. Der Inhalt wird im MP3-Format in dem
Ordner gespeichert.
2. Wählen Sie mit der Taste FUNCTION die Option
USB aus.
~
Auf dem Display wird kurz USB angezeigt.
3. Drücken Sie die _+ Tasten, um Videos, Musik
oder Foto auszuwählen.
✎
HINWEIS
- Wählen Sie eine Datei für die Wiedergabe.
`
Unterbrechen Sie während der USB Aufnahme nicht die
USB-Verbindung oder die Stromversorgung.
Andernfalls können Daten beschädigt werden.
Um die USB-Aufnahme anzuhalten, die STOPP Taste
drücken und entfernen Sie das USB-Gerät, nachdem das
System die CD-Wiedergabe vollständig angehalten hat.
Wenn Sie die USB-Verbindung während der USB-
Aufnahme trennen, schaltet sich das System aus und Sie
können die aufgenommene Datei nicht löschen.
Wenn Sie das USB-Gerät während der Wiedergabe einer
CD an das System anschließen, hält das System die
Wiedergabe vorübergehend an und setzt sie anschließend
fort.
USB-Gerät sicher entfernen
Um die gespeicherten Daten auf Ihrem USB-Gerät
nicht zu beschädigen, müssen Sie das Gerät sicher
entfernen, bevor Sie das USB-Kabel abziehen.
`
`
~
Drücken Sie die Taste GELB (C).
- Die Anzeige REMOVE wird im Display
eingeblendet.
~
Entfernen Sie das USB-Kabel.
✎
`
HINWEIS
`
`
DTS-CDs können nicht kopiert werden.
Wenn Sie Ihre Musikdateien über das Heimkino-
System im 5.1-Kanal-Klang hören möchten,
stellen Sie den Dolby Pro Logic II-Modus auf
Matrix. (Siehe Seite 34)
Wenn die Aufnahmedauer weniger als 5 Sekunden
beträgt, wird keine Datei erstellt.
`
Die USB-Aufnahme ist nur möglich, wenn das USB-Gerät
mit dem FAT-Dateisystem formatiert ist. (Das NTFS-
Dateisystem wird nicht unterstützt.)
`
Entfernen Sie das USB-Kabel langsam vom
USB-Anschluss. Andernfalls kann den USB-
Anschluss beschädigt werden.
`
`
Das Audiosignal wird während der USB-Aufnahme einer
CD nicht wiedergegeben.
Wenn HDMI AUDIO auf Ein gestellt ist, wird die USB-
Aufnahme Funktion nicht unterstützt.
ꢁꢄ
Deutsch
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 36
2011-03-05 �� 11:27:27
Sonstige Informationen
fehlerbehebung
Ziehen Sie die folgende Tabelle zu Rate, wenn das Gerät nicht ordnungsgemäß funktioniert. Wenn das bei Ihnen auftretende
Problem nicht aufgeführt ist oder die u. a. Anweisungen zu keiner Lösung führen, schalten Sie das Gerät aus, ziehen Sie das
Netzkabel aus der Steckdose, und wenden Sie sich an einen autorisierten Händler vor Ort oder an den Samsung-Kundendienst.
Problem
Überprüfen/Beheben
Die Disk wird nicht ausgegeben.
• Ist der Netzstecker an eine Steckdose angeschlossen?
• Schalten Sie das Gerät aus und wieder ein.
Die Wiedergabe startet nicht.
• Überprüfen Sie den Regionalcode der DVD.
Im Ausland gekaufte DVDs werden möglicherweise nicht abgespielt.
• CD-ROMs und DVD-ROMs können mit diesem Heimkino-System nicht wiedergegeben werden.
• Vergewissern Sie sich, dass die Einstellung zur Alterseinstufung korrekt ist.
• Verwenden Sie eine verformte oder zerkratzte Disk?
• Reinigen Sie die Disk.
Die Wiedergabe startet nicht sofort, wenn die
Taste WIEDERGABE/PAUSE gedrückt wird.
Es wird kein Ton wiedergegeben.
• Während der schnellen und langsamen Wiedergabe sowie bei der Einzelbildwiedergabe wird
kein Tonsignal wiedergegeben.
• Sind die Lautsprecher korrekt angeschlossen? Sind die Lautsprechereinstellungen korrekt?
• Ist die Disk schwer beschädigt?
Es wird nur über einige der 6
Lautsprecher ein Ton ausgegeben.
• Bei bestimmten DVDs wird der Ton nur für die Front-Lautsprecher ausgegeben.
• Überprüfen Sie, ob die Lautsprecher korrekt angeschlossen sind.
• Stellen Sie die Lautstärke ein.
• Wenn Sie eine CD oder Radio hören bzw. fernsehen, wird der Ton nur für die
vorderen Lautsprecher ausgegeben.
Sie können die Option „PROLOG“ auswählen, indem Sie die Taste
PL II (Dolby
Pro Logic II) auf der Fernbedienung drücken, um all 6 Lautsprecher zu verwenden.
Ist die Disk mit „Dolby Digital 5.1 CH“ gekennzeichnet? Dolby Digital 5.1-Kanal-
Raumklang wird nur erreicht, wenn die Disk mit 5.1-Kanal-Klang aufgenommen wurde.
Kein Dolby Digital 5.1-Kanal-
Raumklang wird erreicht.
•
• Ist die Audio-Sprache in der Informationsanzeige korrekt als Dolby Digital 5.1-CH
eingestellt?
Die Fernbedienung funktioniert nicht. • Wird die Fernbedienung innerhalb der Betriebsreichweite und mit dem richtigen Winkel
zum Gerät verwendet?
• Sind die Batterien leer?
• Haben Sie den richtigen Modus gewählt (RECEIVER DVD/TV)?
• Die Disk dreht sich, es wird
jedoch kein Bild angezeigt.
• Ist das Fernsehgerät eingeschaltet?
• Sind die Videokabel korrekt angeschlossen?
• Ist die Disk verschmutzt oder beschädigt?
• Eine Disk mit Fabrikationsfehlern kann ggf. nicht korrekt wiedergegeben werden.\
• Die Bildqualität ist schlecht, und
das Bild ist instabil.
Wiedergabe- und Untertitelsprache
können nicht ausgewählt werden.
• Nicht alle Disks enthalten mehrere Wiedergabe- oder Untertitelsprachen.
Der Disk/Titel-Menü-Bildschirm wird
nicht angezeigt, obwohl die Disk/
Titel-Funktion ausgewählt ist.
Das Bildformat kann nicht geändert
werden.
• Verwenden Sie eine Disk, die keine Menüs enthält?
• Sie können 16:9-DVDs in den Formaten 16:9-BREITBILD-Modus, 4:3-LETTER BOX-Modus oder 4:3-
PAN SCAN-Modus wiedergeben, aber 4:3-DVDs können nur im Format 4:3 wiedergegeben werden.
Prüfen Sie die Beschriftung der DVD-Hülle, und wählen Sie die entsprechende Funktion aus.
Deutsch
ꢁꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 37
2011-03-05 �� 11:27:27
Sonstige Informationen
Problem
Überprüfen/Beheben
• Das Heimkino-System funktioniert nicht.
(Beispiel: Es erfolgt keine Stromzufuhr
oder die Tasten an der Gerätevorderseite
funktionieren nicht oder es ist ein
• Halten Sie die STOPP (@) auf der Fernbedienung für mindestens 5 Sekunden gedrückt, ohne dass
eine Disk eingelegt ist (Wiederherstellungsfunktion).
Bei Verwendung der RESET-Funktion (Wiederherstellungsfunktion) gehen alle gespeicherten
Einstellungen verloren.
Verwenden Sie diese Funktion nur, wenn dies erforderlich ist.
komisches Geräusch zu hören.)
• Das Gerät funktioniert nicht einwandfrei.
Das Kennwort, das zur Einstellung
der Alterseinstufung erforderlich
ist, wurde vergessen.
•Wenn die Meldung „NO DISC“ auf der Anzeige des Geräts erscheint, halten Sie die STOPP (@) auf
der Fernbedienung länger als 5 Sekunden gedrückt. Auf dem Bildschirm erscheint „INIT”, und alle
Einstellungen werden auf die Werkseinstellungen zurückgesetzt.
Drücken Sie danach die Taste POWER.
Bei Verwendung der RESET-Funktion gehen alle gespeicherten Einstellungen verloren.
Verwenden Sie diese Funktion nur, wenn dies erforderlich ist.
Ich kann keine Radiosendungen
empfangen.
• Ist die Antenne richtig angeschlossen?
• Installieren Sie bei einem schwachen Antennensignal eine externe UKW-Antenne an einem
Ort mit gutem Empfang.
Sprachcode-Liste
Geben Sie für die Optionen Disc-Menü, Audio und Untertitel den Sprachcode der gewünschten Sprache ein.
(Siehe Seite 27).
Code
Sprache
Code
Sprache
Code
Sprache
Code
Sprache
Code
Sprache
Code
Sprache
1027
1028
1032
1039
1044
1045
1051
Afar
1142
1144
1145
1149
1150
1151
1157
Greek
English
1239
1245
1248
1253
1254
1257
1261
Interlingue
Inupiak
1345
1347
1349
1350
1352
1353
1356
Malagasy
Maori
1482
1483
1489
1491
1495
1498
1501
Kirundi
Romanian
Russian
1527
1528
1529
1531
1532
1534
1535
Tajik
Thai
Abkhazian
Afrikaans
Amharic
Arabic
Esperanto
Spanish
Estonian
Basque
Persian
Indonesian
Icelandic
Italian
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Kinyarwanda
Sanskrit
Assamese
Aymara
Hebrew
Japanese
Sindhi
Sangro
1052
Azerbaijani
1165
Finnish
1269
Yiddish
1357
Malay
1502
Serbo-Croatian
1538
Turkish
1053
1057
1059
1060
1069
Bashkir
Byelorussian
Bulgarian
Bihari
1166
1171
1174
1181
1183
Fiji
1283
1287
1297
1298
1299
Javanese
Georgian
1358
1363
1365
1369
1376
Maltese
Burmese
Nauru
1503
1505
1506
1507
1508
Singhalese
Slovak
1539
1540
1543
1557
1564
Tsonga
Tatar
Faeroese
French
Frisian
Irish
Kazakh
Slovenian
Samoan
Shona
Twi
Greenlandic
Cambodian
Nepali
Ukrainian
Urdu
Bislama
Dutch
Bengali;
Bangla
1066
1186
Scots Gaelic
1300
Canada
1379
Norwegian
1509
Somali
1572
Uzbek
1067
1070
1079
1093
1097
Tibetan
Breton
1194
1196
1203
1209
1217
Galician
Guarani
Gujarati
Hausa
Hindi
1301
1305
1307
1311
1313
Korean
Kashmiri
Kurdish
Kirghiz
Latin
1393
1403
1408
1417
1428
Occitan
(Afan) Oromo
Oriya
1511
1512
1513
1514
1515
Albanian
Serbian
1581
1587
1613
1632
1665
Vietnamese
Volapuk
Wolof
Catalan
Corsican
Czech
Siswati
Punjabi
Sesotho
Sundanese
Xhosa
Polish
Yoruba
1103
Welsh
1226
Croatian
1326
Lingala
1435
Pashto, Pushto
1516
Swedish
1684
1697
Chinese
Zulu
1105
1109
Danish
1229
1233
Hungarian
Armenian
1327
1332
Laothian
1436
1463
Portuguese
Quechua
1517
1521
Swahili
Tamil
German
Lithuanian
Latvian,
Lettish
Rhaeto-
1130
Bhutani
1235
Interlingua
1334
1481
1525
Tegulu
Romance
ꢁꢆ
Deutsch
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 38
2011-03-05 �� 11:27:27
Technische Daten
Gewicht
2,76 kg
Abmessungen
430 (B) x 59 (H) x 249 (T) mm
Allgemein
Betriebstemperaturbereich
Zulässiger Luftfeuchtigkeitsbereich
Signal/Rauschabstand
+5°C~+35°C
10 % bis 75 %
70 dB
UKW-EMPFÄNGER Verwendbare Empfindlichkeit
Klirrfaktor (Total Harmonic Distortion)
10 dB
0,5 %
Lesegeschwindigkeit: 3,49 bis 4,06 m/s
Spieldauer (Einseitig, Single Layer Disc): 135 Min.
Lesegeschwindigkeit: 4,8 bis 5,6 m/s
Maximale Spieldauer: 74 Min.
Lesegeschwindigkeit: 4,8 bis 5,6 m/Sek.
Maximale Spieldauer: 20 Min.
480i(576i)
DVD (Digital Versatile Disc
Disk
12 cm (Compact Disc)
CD: 8 cm (Compact Disc)
Composite Video
1 Kanal: 1,0 Vss (75 Ω)
480i(576i)
Videoausgang
Video/Audio
Y: 1,0 Vss (75 Ω)
Component Video
HDMI
PR: 0,70 Vss (75 Ω)
PB: 0,70 Vss (75 Ω)
1080p, 1080i, 720p, 480p(576p)
Ω
2 x 142 W (3
142 W (3
2 x 141 W (3
142 W (3
)
Ausgangsleistung der Front-Lautsprecher
Ausgangsleistung des Center-Lautsprechers
Ausgangsleistung der Surround Lautsprecher
Ausgangsleistung des Subwoofers
Frequenzbereich
Ω
)
Ω)
Ω)
Verstärker
20 Hz ~ 20 kHz
65 dB
Signal/Rauschabstand
Kanaltrennung
60 dB
Eingangsempfindlichkeit
(AUX) 800 mV
*: Nominalwert
- Samsung Electronics Co., Ltd behält sich das Recht auf unangekündigte Änderungen vor.
- Gewicht und Abmessungen können von den Angaben abweichen.
- Änderungen der technischen Daten und des Geräte-Designs vorbehalten.
- Die technischen Daten zur benötigten Netzspannung finden Sie auf dem Typenschild am Produkt.
Deutsch
ꢁꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 39
2011-03-05 �� 11:27:27
Sonstige Informationen
HT-D450
5.1-Lautsprechersystem
Lautsprechersystem
Front
3 Ω
Surround
3 Ω
Center
3 Ω
Subwoofer
3 Ω
Impedanz
Frequenzbereich
140Hz~20KHz 140Hz~20KHz 140Hz~20KHz 40Hz~160Hz
Schalldruck
86dB/W/M
142W
284W
86dB/W/M
141W
282W
86dB/W/M
142W
284W
88dB/W/M
142W
284W
Nenneingangsspannung
Maximale Eingangsspannung
Lautsprecher
Front : 90 x 141,5 x 68,5 mm
Surround : 84 x 104,5 x 68,5 mm
Center : 360 x 74,5 x 68,5 mm
Subwoofer : 168 x 350 x 285 mm
Abmessungen (B x H x T)
Gewicht
Front: 0,58 Kg, Center : 0,96 Kg
Surround : 0,4 Kg, Subwoofer : 3,6 Kg
HT-D453
5.1-Lautsprechersystem
Surround Center
3 Ω 3 Ω
Lautsprechersystem
Front
3 Ω
Subwoofer
3 Ω
Impedanz
Frequenzbereich
Schalldruck
140Hz~20KHz 140Hz~20KHz 140Hz~20KHz 40Hz~160Hz
86dB/W/M
142W
86dB/W/M
141W
86dB/W/M
142W
88dB/W/M
142W
Nenneingangsspannung
Maximale Eingangsspannung
Lautsprecher
284W
282W
284W
284W
Front : 90 x 1200 x 119 mm (Ständerfuß : 250 x 250)
Surround : 84 x 104,5 x 68,5 mm
Abmessungen (B x H x T)
Gewicht
Center : 360 x 74,5 x 68,5 mm
Subwoofer : 168 x 350 x 285 mm
Front : 3,68 Kg, Center : 0,96 Kg
Surround : 0,4 Kg, Subwoofer : 3,6 Kg
HT-D455
5.1-Lautsprechersystem
Lautsprechersystem
Front
3 Ω
Surround
Center
Subwoofer
3 Ω
3 Ω
3 Ω
Impedanz
140Hz~20KHz 140Hz~20KHz 140Hz~20KHz 40Hz~160Hz
Frequenzbereich
Schalldruck
86dB/W/M
142W
86dB/W/M
141W
86dB/W/M
142W
88dB/W/M
142W
Nenneingangsspannung
Maximale Eingangsspannung
Lautsprecher
284W
282W
284W
284W
Front/Surround : 90 x 1200 x 119 mm (Ständerfuß : 250 x 250)
Center : 360 x 74,5 x 68,5 mm
Abmessungen (B x H x T)
Gewicht
Subwoofer : 168 x 350 x 285 mm
Front/Surround : 3,68 Kg, Center : 0,96 Kg
Subwoofer : 3,6 Kg
ꢂ0
Deutsch
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 40
2011-03-05 �� 11:27:28
Kontakt zu Samsung
Falls Sie Fragen oder Anregungen zu Samsung-Produkten haben, wenden Sie sich bitte an den Samsung-
Kundendienst.
Region
` North America
Canada
Mexico
U.S.A
` Latin America
Argentine
Brazil
Hotline
Website
Region
Serbia
Hotline
0700 Samsung (0700 726
Website
www.samsung.com
7864)
1-800-SAMSUNG (726-7864)
01-800-SAMSUNG (726-7864) www.samsung.com
1-800-SAMSUNG (726-7864)
www.samsung.com
Slovakia
Spain
Sweden
0800-SAMSUNG (726-7864)
902-1-SAMSUNG (902 172 678) www.samsung.com
0771 726 7864 (SAMSUNG)
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/ch
www.samsung.com/
ch_fr/(French)
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
0800-333-3733
0800-124-421 / 4004-0000
800-SAMSUNG (726-7864)
01-8000112112
0-800-507-7267
1-800-751-2676
1-800-10-7267
800-6225
1-800-299-0013
800-7919267
1-800-234-7267
00-1800-5077267
800-7267
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
0848-SAMSUNG (7267864,
CHF 0.08/min)
Switzerland
Chile
U.K
Eire
Lithuania
Latvia
Estonia
0330 SAMSUNG (7267864)
0818 717100
8-800-77777
8000-7267
800-7267
Colombia
Costa Rica
Dominica
Ecuador
El Salvador
Guatemala
Honduras
Jamaica
Nicaragua
Panama
Peru
Puerto Rico
Trinidad &
Tobago
` CIS
Russia
Georgia
Armenia
Azerbaijan
8-800-555-55-55
8-800-555-555
0-800-05-555
088-55-55-555
8-10-800-500-55-500
(GSM: 7799)
8-10-800-500-55-500
00-800-500-55-500
8-10-800-500-55-500
www.samsung.com
-
-
-
Kazakhstan
www.samsung.com
0-800-777-08
1-800-682-3180
Uzbekistan
Kyrgyzstan
Tadjikistan
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.ua
www.samsung.com/
ua_ru
1-800-SAMSUNG (726-7864)
0-800-100-5303
www.samsung.com
www.samsung.com
Venezuela
` Europe
Albania
Ukraine
0-800-502-000
42 27 5755
0810 - SAMSUNG (7267864,
€ 0.07/min)
-
Belarus
Moldova
` Asia Pacific
Australia
New Zealand
China
810-800-500-55-500
00-800-500-55-500
-
-
Austria
www.samsung.com
www.samsung.com/
be (Dutch)
Belgium
02-201-24-18
1300 362 603
www.samsung.com
www.samsung.com/
0800 SAMSUNG (0800 726 786) www.samsung.com
400-810-5858 / 010-6475 1880 www.samsung.com
www.samsung.com/hk
be_fr (French)
Bosnia
Bulgaria
Croatia
05 133 1999
07001 33 11
-
www.samsung.com
Hong Kong
(852) 3698 4698
www.samsung.com/
hk_en/
062 SAMSUNG (062 726 7864) www.samsung.com
800-SAMSUNG (800-726786)
3030 8282 / 1800 110011 /
1800 3000 8282 / 1800 266 8282
0800-112-8888 /
021-5699-7777
0120-327-527
1800-88-9999
1-800-10-SAMSUNG(726-7864) /
1-800-3-SAMSUNG(726-7864) /
1-800-8-SAMSUNG(726-7864) /
02-5805777
1800-SAMSUNG (726-7864)
1800-29-3232 / 02-689-3232 www.samsung.com
0800-329-999
1 800 588 889
India
www.samsung.com
www.samsung.com
Samsung Zrt., česká organizační
Czech
www.samsung.com
složka, Oasis Florenc, Soko
-
lovská394/17, 180 00, Praha 8
70 70 19 70
Indonesia
Denmark
Finland
France
www.samsung.com
www.samsung.com
www.samsung.com
Japan
Malaysia
www.samsung.com
www.samsung.com
030 - 6227 515
01 48 63 00 00
01805 - SAMSUNG (726-7864
€ 0,14/Min. dt. Festnetz, max. € www.samsung.com
0,42/Min. über Mobilfunk)
06-80-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
+381 0113216899
261 03 710
023 207 777
020 405 888
0900-SAMSUNG
(0900-7267864) (€ 0,10/Min)
815-56 480
0 801 1SAMSUNG (172678)
/ 022-607-93-33
80820-SAMSUNG (726-7864)
Philippines
www.samsung.com
www.samsung.com
Germany
Hungary
Italia
Kosovo
Luxemburg
Macedonia
Montenegro
www.samsung.com
www.samsung.com
Singapore
Thailand
Taiwan
Vietnam
` Middle East
Bahrain
Egypt
Jordan
Morocco
Oman
Saudi Arabia
Turkey
-
www.samsung.com
www.samsung.com
www.samsung.com
-
-
8000-4726
08000-726786
800-22273
080 100 2255
800-SAMSUNG (726-7864)
9200-21230
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
Netherlands
Norway
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
Poland
Portugal
444 77 11
800-SAMSUNG (726-7864)
1. 08010 SAMSUNG (72678) -
doar din reţeaua Romtelecom,
tarif local
2. 021.206.01.10 - din orice
reţea, tarif normal
U.A.E
` Africa
Nigeria
Rumania
www.samsung.com
0800-SAMSUNG (726-7864)
0860-SAMSUNG (726-7864 )
www.samsung.com
www.samsung.com
South Africa
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 41
2011-03-05 �� 11:27:28
Korrekte Entsorgung der Batterien dieses Produkts
(In den Ländern der Europäischen Union und anderen europäischen Ländern mit einem separaten
Altbatterie-Rücknahmesystem)
Die Kennzeichnung auf der Batterie bzw. auf der dazugehörigen Dokumentation oder Verpackung gibt
an, dass die Batterie zu diesem Produkt nach seiner Lebensdauer nicht zusammen mit dem normalen
Haushaltsmüll entsorgt werden darf. Wenn die Batterie mit den chemischen Symbolen Hg, Cd oder Pb
gekennzeichnet ist, liegt der Quecksilber-, Cadmium- oder Blei-Gehalt der Batterie über den in der EG-
Richtlinie 2006/66 festgelegten Referenzwerten. Wenn Batterien nicht ordnungsgemäß entsorgt werden,
können sie der menschlichen Gesundheit bzw. der Umwelt schaden.
Bitte helfen Sie, die natürlichen Ressourcen zu schützen und die nachhaltige Wiederverwertung von
stofflichen Ressourcen zu fördern, indem Sie die Batterien von anderen Abfällen getrennt über Ihr örtliches
kostenloses Altbatterie-Rücknahmesystem entsorgen.
Korrekte Entsorgung von Altgeräten (Elektroschrott)
(In den Ländern der Europäischen Union und anderen europäischen Ländern mit einem separaten Sammelsystem)
Die Kennzeichnung auf dem Produkt, Zubehörteilen bzw. auf der dazugehörigen Dokumentation gibt an, dass das
Produkt und Zubehörteile (z. B. Ladegerät, Kopfhörer, USB-Kabel) nach ihrer Lebensdauer nicht zusammen mit
dem normalen Haushaltsmüll entsorgt werden dürfen. Entsorgen Sie dieses Gerät und Zubehörteile bitte getrennt
von anderen Abfällen, um der Umwelt bzw. der menschlichen Gesundheit nicht durch unkontrollierte Müllbeseitigung
zu schaden. Helfen Sie mit, das Altgerät und Zubehörteile fachgerecht zu entsorgen, um die nachhaltige
Wiederverwertung von stofflichen Ressourcen zu fördern.
Private Nutzer wenden sich an den Händler, bei dem das Produkt gekauft wurde, oder kontaktieren die zuständigen
Behörden, um in Erfahrung zu bringen, wo sie das Altgerät bzw. Zubehörteile für eine umweltfreundliche Entsorgung
abgeben können.
Gewerbliche Nutzer wenden sich an ihren Lieferanten und gehen nach den Bedingungen des Verkaufsvertrags vor.
Dieses Produkt und elektronische Zubehörteile dürfen nicht zusammen mit anderem Gewerbemüll entsorgt werden.
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-EN-DE-0304.indd 42
2011-03-05 �� 11:27:29
HT-D450
HT-D453
HT-D455
Sistema Home
Entertainment digitale
manuale utente
Immagina le possibilità
Grazie per avere acquistato questo prodotto Samsung.
Per ricevere un servizio più completo, registrare il prodotto
all'indirizzo
www.samsung.com/register
Download from Www.Somanuals.com. All Manuals Search And Download.
1
HT-D450-ZF-IT-0304.indd
2011-03-05 �� 11:33:24
Informazioni sulla sicurezza
Avvertenze per la sicurezza
PER RIDURRE IL RISCHIO DI SCOSSE ELETTRICHE, NON RIMUOVERE IL COPERCHIO (O LA PARTE POSTERIORE).
ALL'INTERNO NON VI SONO PARTI RIPARABILI DALL'UTENTE. PER LA MANUTENZIONE RIVOLGERSI AL PERSONALE DI
ASSISTENZA QUALIFICATO
ATTENZIONE
RISCHIO DI SCOSSE ELETTRICHE
NON APRIRE
Questo simbolo indica la presenza di
"tensione pericolosa" all'interno del
ATTENZIONE : PER EVITARE
Questo simbolo indica istruzioni
importanti che accompagnano il
prodotto.
SCOSSE ELETTRICHE, INSERIRE A FONDO
prodotto, che comporta il rischio di scosse LO SPINOTTO PIÙ LARGO DELLA SPINA
elettriche o lesioni.
NELLA RELATIVA PRESA.
AVVERTENZA
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
~
Per ridurre il rischio di incendio o di scosse
elettriche, non esporre questo apparecchio alla
pioggia o all'umidità.
KLASS 1 LASER APPARAT
PRODUCTO LÁSER CLASE 1
PRODOTTO LASER DI CLASSE 1
ATTENZIONE
Questo lettore CD è classificato come prodotto
LASER DI CLASSE 1.
L'utilizzo di comandi, regolazioni o funzioni che si
riferiscono a procedure diverse da quelle
specificate può provocare l'esposizione a
radiazioni pericolose.
~
Non schizzare o sgocciolare liquidi sull'apparecchio e non
porre su di esso oggetti contenenti liquidi, come ad
esempio vasi.
Poiché la presa di rete viene utilizzata per scollegare
l'apparecchio, deve essere facilmente accessibile in
qualsiasi momento.
Questa apparecchiatura deve essere sempre collegata a
una presa di rete con collegamento a terra.
Per scollegare l'apparecchio dalla corrente è necessario
estrarre la spina dalla presa; perciò la presa dovrà essere
facilmente accessibile.
~
~
~
ATTENZIONE
~
ꢀUNꢀRAGGIOꢀLASERꢀINVISIBILEꢀVIENEꢀEMESSOꢀNELꢀ
CASOꢀINꢀCUIꢀL'APPARECCHIOꢀVENGAꢀAPERTOꢀCONꢀILꢀ
SISTEMAꢀDIꢀINTERBLOCCOꢀNONꢀFUNZIONANTEꢀINꢀ
MODOꢀCORRETTO,ꢀOꢀESCLUSO.ꢀEVITAREꢀLAꢀDIRETTAꢀ
ESPOSIZIONEꢀALꢀRAGGIOꢀLASER.
“Questo apparecchio è fabbricato in conformità al D.M. 28.08.95 N. 548 ed in particolare a quanto
specificato nell’art. 2, comma 1”
ꢀ
Italiano
Download from Www.Somanuals.com. All Manuals Search And Download.
2
HT-D450-ZF-IT-0304.indd
2011-03-05 �� 11:33:24
Precauzioni
~
~
~
Verificare che le caratteristiche degli alimentatori CA presenti in casa corrispondano all'etichetta di identificazione posta sul
retro del prodotto.
Installare il prodotto orizzontalmente, su un supporto adeguato (mobile), verificando che vi sia spazio sufficiente per una
corretta ventilazione (7,5 - 10 cm).
Non sistemare il prodotto su amplificatori o altri dispositivi che potrebbero diventare caldi. Assicurarsi che le aperture di
ventilazione non siano coperte.
~
~
~
Non appoggiare oggetti sopra il prodotto.
Prima di spostare il prodotto, verificare che non contenga nessun disco.
Per scollegare completamente il prodotto dall'alimentazione, staccare la spina di alimentazione dalla presa a muro, in
particolare quando non viene usato per un lungo periodo di tempo.
~
~
~
Durante i temporali, scollegare la spina di alimentazione dalla presa. I picchi di alta tensione provocati dai fulmini
potrebbero danneggiare il prodotto.
Non esporre il prodotto alla luce diretta del sole o altre fonti di calore. Questo potrebbe condurre a surriscaldamento e
malfunzionamento del prodotto.
Tenere il prodotto lontano da fonti di umidità e calore eccessivo e da apparecchi che generano un forte campo magnetico
o elettrico (ad es. diffusori).
~
~
~
In caso di malfunzionamento del prodotto, scollegare il cavo di alimentazione dalla presa di corrente.
Il prodotto non è destinato all'uso industriale. Questo prodotto è destinato esclusivamente all'uso personale.
Se il prodotto o il disco vengono conservati a basse temperature, potrebbe formarsi condensa. In inverno, se si trasporta il
prodotto, attendere circa 2 ore prima di utilizzarlo, in modo che ritorni a temperatura ambiente.
~
Le batterie utilizzate con questo prodotto contengono sostanze chimiche dannose per l'ambiente.
Non smaltirle con i comuni rifiuti domestici.
Accessori
Controllare di seguito gli accessori forniti.
FUNCTION
TV SOURCE
POWER
RECEIVER
SLEEP
DVD
TV
1
4
7
2
5
8
0
3
6
9
D
S
P
/
E
Q
MUTE
TUNING
/CH
VOL
DISC MENU
TOOLS
REPEA
T
MENU
T
I
T
L
E
M
E
N
U
INFO
RETURN
EXIT
D
A
B
C
AUDIO
DIMMER
GIGA
S.VOL
UPSCALE
P.BASS
TUNER
S
/
W
L
E
V
E
L
MEMOR
Y
MO/ST
U
S
B
R
E
C
Telecomando / batterie
(formato AAA)
Cavo video
Antenna FM
Manuale utente
Jack Scart
Italiano
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
3
HT-D450-ZF-IT-0304.indd
2011-03-05 �� 11:33:25
Informazioni sulla sicurezza
Precauzioni per la manipolazione e la
conservazione dei dischi
Licenza
~
INFORMAZIONI SUI VIDEO DIVX: DivX® è un formato
video digitale creato da DivX, Inc. Questo è un
I graffi sui dischi, anche piccoli, possono ridurre la
dispositivo ufficiale certificato DivX® che riproduce video DivX. Per ulteriori
informazioni e per gli strumenti software per la conversione dei file in video
DivX, visitare il sito www.divx.com.
qualità dell'audio e dell'immagine o far "saltare" i dischi.
Prestare particolare attenzione a non graffiare i dischi.
INFORMAZIONI SUI DIVX VIDEO ON DEMAND: Questo dispositivo certificato
DivX® deve essere registrato per consentire la riproduzione dei film DivX
video on demand (VOD) acquistati. Per ottenere il codice di registrazione,
individuare la sezione DivX VOD nel menu di impostazione del dispositivo.
Visitare il sito vod.divx.com per ulteriori informazioni su come completare la
registrazione.
Manipolazione dei dischi
~
~
~
Non toccare il lato di riproduzione del
disco.
Tenere il disco per i bordi, senza toccare la
superficie con le dita.
Non incollare carta o nastro adesivo sui dischi.
Certificato DivX® per riprodurre video DivX®, compresi contenuti premium
DivX®, Certificato DivX® e i loghi ad essi associati sono marchi di DivX,
Inc. e sono utilizzati su licenza.
Protetto da uno o più dei seguenti brevetti USA: 7,295,673; 7,460,668;
7,515,710; 7,519,274
Conservazione dei dischi
~
~
~
Non conservare alla luce diretta del sole
Conservare in un luogo fresco e ventilato
Conservare in una custodia di protezione pulita.
Conservare in posizione verticale.
~
~
HDMI, il logo HDMI e High-Definition Multimedia
Interface sono marchi o marchi registrati di HDMI
Licensing LLC negli Stati Uniti e in altri Paesi.
Questo prodotto è dotato di una tecnologia di protezione dalla copia
tutelata da alcuni brevetti U.S.A. e da altri diritti di proprietà intellettuale
di Rovi Corporation. Sono vietati il reverse engineering o lo smontaggio.
✎
`
NOTA
Non sporcare i dischi.
~
Dolby e il simbolo della doppia D sono marchi registrati di Dolby
Laboratories.
`
Non caricare dischi crepati o graffiati.
Manipolazione e conservazione
dei dischi
Copyright
© 2011 Samsung Electronics Co., Ltd. Tutti i diritti
riservati.
Se sul disco sono presenti impronte o sporcizia, pulirlo
con un detergente delicato diluito in acqua e asciugarlo
con un panno morbido.
Protezione contro la copia
~
Pulire i dischi strofinando delicatamente
dall'interno all'esterno
~
Molti dischi DVD sono codificati con una protezione contro la copia.
Per questo motivo, il prodotto deve essere collegato direttamente al
televisore, non a un videoregistratore. Con i dischi DVD protetti
contro la copia, il collegamento a un videoregistratore produce
un'immagine distorta.
✎
`
NOTA
Il contatto di aria calda con le parti fredde all'interno del
prodotto può provocare condensa. Se si forma
condensa all'interno, il prodotto potrebbe non
funzionare correttamente. In questo caso, rimuovere il
disco e lasciare il prodotto acceso per una o due ore,
senza eseguire alcuna operazione.
ꢂ
Italiano
Download from Www.Somanuals.com. All Manuals Search And Download.
4
HT-D450-ZF-IT-0304.indd
2011-03-05 �� 11:33:25
Indice
2
3
3
4
4
4
4
Avvertenze per la sicurezza
INFORMAZIONI SULLA
Precauzioni
SICUREZZA
Accessori
Precauzioni per la manipolazione e la conservazione dei dischi
Licenza
Copyright
2
OPERAZIONI PRELIMINARI
7
Protezione contro la copia
7
7
Icone utilizzate nel manuale
Tipi di dischi e caratteristiche
11 Descrizione
11
12
Pannello anteriore
Pannello posteriore
13 Telecomando
15 Collegamento dei diffusori
COLLEGAMENTI
18 Collegamento dell'uscita video al televisore
20 Collegamento dell'antenna FM
21
Collegamento dell'audio da apparecchi esterni
15
22 Operazioni preliminari (impostazioni iniziali)
22 Impostazione del menu di configurazione
23 Display
CONFIGURAZIONE
23
23
23
23
23
Formato del televisore
BD Wise
22
Risoluzione
Formato HDMI
Segn. uscita video
24 Audio
24
25
25
25
26
26
Impostazione Diffusori
DRC (compressione del livello audio)
SINC. AUDIO
HDMI AUDIO
EQ utente
Canale rit. audio
26 Sistema
26
26
26
Impostazioni iniziali
Registrazione DivX(R)
DivX(R) Disattivazione
27 Lingua
27 Sicurezza
27
27
Livello Blocco
Cambio password
27 Supporto
27
Informazioni sul prodotto
Italiano
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
5
HT-D450-ZF-IT-0304.indd
2011-03-05 �� 11:33:25
Indice
28 Riproduzione di un disco
28 Riproduzione di CD audio (CD-DA)/MP3/WMA
29 Riproduzione di file JPEG
29 Utilizzo della funzione di riproduzione
33 Modo audio
FUNZIONI DI BASE
28
35 Radio
36 Funzione USB
36 Registrazione USB
FUNZIONI AVANZATE
36
37 Risoluzione dei problemi
38 Elenco codici lingue
39 Specifiche
ALTRE INFORMAZIONI
37
•
•
Le figure e le illustrazioni del presente Manuale utente sono fornite soltanto come riferimento. Possono differire
rispetto all'aspetto effettivo del prodotto.
Può essere richiesto un rimborso nel caso in cui
a. l'uscita del tecnico in seguito a una chiamata non rileva difetti nel prodotto
(per es. nel caso l'utente abbia omesso di leggere il presente manuale)
b. l'utente ha portato l'unità presso un centro di riparazione che non rileva difetti nel prodotto
(per es. nel caso l'utente abbia omesso di leggere il presente manuale).
•
L'importo di tale rimborso verrà comunicato all'utente prima di eseguire una visita a domicilio o un eventuale
intervento di manutenzione.
ꢄ
Italiano
Download from Www.Somanuals.com. All Manuals Search And Download.
6
HT-D450-ZF-IT-0304.indd
2011-03-05 �� 11:33:25
Operazioni preliminari
Icone utilizzate nel manuale
Tipi di dischi e caratteristiche
Prima di leggere il manuale utente, tener presente le
seguenti indicazioni.
Codice regionale
Icona
Termine
Definizione
Il prodotto e i dischi sono codificati in base alla regione. Per
poter riprodurre un disco, i codici regionali devono
corrispondere. Se i codici non corrispondono, il disco non
viene riprodotto.
Indica una funzione disponibile
per i dischi DVD-Video o
DVD±R/±RW registrati e finalizzati
in modo Video.
DVD
d
Codice
Indica una funzione disponibile
per i CD di dati (CD DA, CD-R/-
RW).
Tipo di disco
Area
regionale
CD
MP3
JPEG
DivX
B
A
G
D
USA, territori USA e Canada
1
Indica una funzione disponibile
per i dischi
CD-R/-RW.
Europa, Giappone, Medio
Oriente, Egitto, Sudafrica,
Groenlandia
2
3
Indica una funzione disponibile
per i dischi
CD-R/-RW.
Taiwan, Corea, Filippine,
Indonesia, Hong Kong
Indica una funzione disponibile
per i dischi MPEG4. (DVD±R/
±RW, CD-R/-RW)
DVD-VIDEO
Messico, America del Sud,
America centrale, Australia,
Nuova Zelanda, Isole del
Pacifico, Caraibi
4
Indica una situazione in cui una
funzione non è attiva o in cui è
possibile che le impostazioni
vengano annullate.
ATTENZIONE
NOTA
Russia, Europa orientale, India,
maggior parte dei Paesi africani,
Corea del Nord, Mongolia
!
5
6
Indica un suggerimento o un'istruzione
nella pagina che aiutano a comprendere
il funzionamento dell'unità.
Cina
✎
Tasto di
scelta
rapida
Consente un accesso diretto e facile alla
funzione premendo l'apposito tasto sul
telecomando.
Italiano
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
7
HT-D450-ZF-IT-0304.indd
2011-03-05 �� 11:33:26
Operazioni preliminari
Tipi di dischi riproducibili
Dischi CD-R MP3
~
~
~
~
~
Possono essere riprodotti solo i dischi CD-R con file
Tipi di dischi e Segnali Dimensioni
Tempo di
MP3 in formato ISO 9660 o Joliet.
marchio (logo) registrati
disco
riproduzione max
I nomi dei file MP3 non devono contenere spazi vuoti
o caratteri speciali (. / = +).
Utilizzare dischi registrati con una compressione/
decompressione superiore a 128 Kbps.
Possono essere riprodotti soltanto i file con
estensione ".mp3" e ".MP3".
Possono essere riprodotti solo i dischi multisessione a
scrittura consecutiva. I dischi multisessione che
contengono spazi vuoti possono essere riprodotti
solo fino al segmento vuoto.
Se il disco non viene chiuso, l'avvio della riproduzione
richiederà un tempo maggiore e potrebbero non venir
riprodotti tutti i file registrati.
Circa 240 min.
(lato singolo)
Circa 480 min.
(doppio lato)
12 cm
AUDIO
+
Circa 80 min.
(lato singolo)
Circa 160 min.
(doppio lato)
VIDEO
DVD-VIDEO
8 cm
~
~
12 cm
8 cm
74 min.
20 min.
AUDIO
In caso di file codificati in formato VBR (Variable Bit
Rate), per esempio file codificati in bit rate sia bassi
sia alti (32 ~ 320 Kbps), durante la riproduzione
potrebbero verificarsi interruzioni dell'audio.
Possono essere riprodotte al massimo 500 tracce per
ogni CD.
CD AUDIO
DivX
AUDIO
+
12 cm
8 cm
~
~
VIDEO
Possono essere riprodotte al massimo 300 cartelle
per ogni CD.
Non utilizzare i seguenti tipi di dischi!
~
I dischi LD, CD-G, CD-I, CD-ROM, DVD-ROM e DVD-
RAM non possono essere riprodotti con questo
prodotto. Se vengono riprodotti dischi di questi tipi, sul
televisore appare il messaggio <WRONG DISC
FORMAT (FORMATO DISCO ERRATO)>.
I dischi DVD acquistati all'estero potrebbero non essere
riproducibili su questo prodotto.
Dischi CD-R JPEG
~
Possono essere riprodotti solo i file con estensione ".
jpg".
~
Se il disco non viene chiuso, l'avvio della riproduzione
richiederà un tempo maggiore e potrebbero non venir
riprodotti tutti i file registrati.
~
Se vengono riprodotti questi dischi, sul televisore
appare il messaggio <Wrong Region. Please check
Disc (Area errata. Controllare disco)>.
~
~
Possono essere riprodotti solo i dischi CD-R con file
JPEG in formato ISO 9660 o Joliet.
I nomi dei file JPEG non devono essere composti da
più di 8 caratteri e non devono contenere spazi vuoti
o caratteri speciali (. / = +).
Tipi e formati di dischi
~
Possono essere riprodotti solo i dischi multisessione a
scrittura consecutiva. I dischi multisessione che
contengono spazi vuoti possono essere riprodotti
solo fino al segmento vuoto.
In ogni cartella è possibile archiviare un massimo di
999 immagini.
Quando si riproduce un Picture CD Kodak/Fuji, è
possibile visualizzare solo i file JPEG contenuti nella
cartella Pictures.
I dischi di immagini diversi dai Picture CD Kodak/Fuji
potrebbero avere tempi di avvio più lunghi o
addirittura non essere riproducibili.
Questo prodotto non supporta i file multimediali protetti da DRM.
Dischi CD-R
~
Alcuni dischi CD-R potrebbero non essere riproducibili, a
seconda del dispositivo con cui sono stati registrati
(masterizzatori CD o PC) e delle condizioni.
~
~
~
Utilizzare un CD-R da 650 MB/74 minuti. Non utilizzare
CD-R superiori a 700 MB/80 minuti, perché potrebbero
non essere riprodotti.
~
~
~
Alcuni CD-RW (riscrivibili) potrebbero non essere riprodotti.
Solo i CD-R che sono stati "chiusi" correttamente possono
essere riprodotti integralmente. Se la sessione è stata
chiusa, ma il disco è rimasto aperto, potrebbe non essere
possibile riprodurre il disco integralmente.
ꢆ
Italiano
Download from Www.Somanuals.com. All Manuals Search And Download.
8
HT-D450-ZF-IT-0304.indd
2011-03-05 �� 11:33:26
Dischi DVD±R/±RW, CD-R/RW
~
Gli aggiornamenti software per i formati
incompatibili non sono supportati. (esempio:
QPEL, GMC, risoluzione superiore a 800 x
600 pixel, ecc.)
~
I dischi DVD-R/-RW non registrati
correttamente in formato DVD Video non
possono essere riprodotti.
Formati supportati (DivX)
Questo prodotto supporta soltanto i formati indicati di
seguito.
Se non sono supportati né il formato video né quello
audio, possono verificarsi problemi quali immagini
distorte o assenza dell'audio.
Formati video supportati
Formato
Versioni supportate
AVI
WMV
DivX3.11~DivX5.1, XviD
V1/V2/V3/V7
Formati audio supportati
Frequenza di
campionatura
Formato
Bit rate
MP3
WMA
AC3
80~320 kbps
56~128 kbps
128~384 kbps
1,5 Mbps
44,1 khz
44,1/48 khz
44,1 khz
DTS
~
~
I file DivX, compresi i file audio e video, creati in
formato DTS possono supportare solo fino a 6
Mbps.
Formato: anche se la risoluzione predefinita dei DivX
è 640x480 pixel, questo prodotto supporta fino a
720x480 pixel. Le risoluzioni superiori a 800 non
sono supportate.
~
~
~
Quando si riproduce un disco con una frequenza di
campionamento superiore a 48 khz o 320 kbps, lo
schermo può tremare durante la riproduzione.
Le sezioni con una frequenza di fotogrammi elevata
potrebbero non venire riprodotte durante la
riproduzione di un file DivX.
Poiché questo prodotto fornisce soltanto i formati di
decodifica autorizzati da DivX Networks, Inc., i file
DivX creati dall'utente potrebbero non essere
riproducibili.
Italiano
ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
9
HT-D450-ZF-IT-0304.indd
2011-03-05 �� 11:33:26
Operazioni preliminari
Appunti sul collegamento USB
14) Formati file supportati
Immagine
ferma
Dispositivi supportati: Supporti di memorizzazione
USB, lettori MP3, foto/videocamere digitali
Formato
Musica
Filmato
Nome del
file
JPG
MP3
WMA
WMV
DivX
.AVI
1) Se il nome di una cartella o di un file è più lungo
di 10 caratteri, è possibile che si verifichino
Estensione
file
JPG
.JPEG
.MP3
.WMA
.WMV
problemi di visualizzazione o di funzionamento.
80~320
kbps
56~128
kbps
2) I file di sottotitoli più grandi di 300KB non
possono essere visualizzati correttamente.
3) Non sono supportati certi dispositivi USB o foto/
videocamere digitali e lettori di schede USB.
Bit rate
Versione
Pixel
–
–
4Mbps
4Mbps
DivX3.11~
DivX5.1,
XviD
V1,V2,
V3,V7
–
–
V8
–
640x480
720x480
4) I file system FAT16 e FAT32 sono supportati.
Frequenza
di campio-
natura
5) I file di foto (JPEG), musica (MP3, WMA) e video
devono avere un nome coreano o inglese.
Altrimenti il file non può essere riprodotto.
–
44,1kHz
44,1kHz
44,1KHz ~ 48KHz,
6) Effettuare il collegamento direttamente alla porta
USB del prodotto. Se si utilizza un altro cavo per
il collegamento possono verificarsi problemi di
compatibilità USB.
7) Se si inserisce più di un dispositivo di memoria in
un lettore multischeda, possono verificarsi
problemi di funzionamento.
8) Il protocollo PTP per la foto/videocamera digitale
non è supportato.
9) Non scollegare il dispositivo USB durante il
processo di "lettura".
10) Più la risoluzione dell'immagine è elevata, più il
ritardo nella visualizzazione è lungo.
11) I file MP3/WMA o video con DRM scaricati da
siti commerciali non sono riprodotti.
12) Il dispositivo HDD esterno non è supportato.
13) La corrente massima supportata dalla porta
USB per un dispositivo esterno è di 500 mA (a
5V CC).
10
Italiano
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 10
2011-03-05 �� 11:33:26
Descrizione
Pannello anteriore
3
1
2
4
5
6
7
8
9
10
VANO DEL DISCO
Inserire il disco qui.
1
DISPLAY
Mostra lo stato di riproduzione, l'ora, etc.
Rileva i segnali del telecomando.
Apre e chiude il vano del disco.
2
SENSORE TELECOMANDO
3
TASTO DI APERTU RA/CHIUSURA
(
(
)
4
I modi vengono selezionati nella sequenza seguente:
DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM
5
TASTO FUNZIONE
TASTO DI ARRESTO
TASTO DI RIPRODUZIONE/PAUSA
(
)
Interrompe la riproduzione del disco.
Riproduce un disco o mette in pausa la riproduzione.
Regolazione del volume.
(
)
6
7
8
9
)
TASTO DI REGOLAZIONE DEL VOLUME (
,
)
Accende e spegne il prodotto.
TASTO DI ACCENSIONE (
PORTA USB
)
È possibile collegare e riprodurre file da dispositivi di memorizzazione
USB esterni come lettori MP3, memorie flash USB, ecc.
10
Italiano
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 11
2011-03-05 �� 11:33:27
Operazioni preliminari
Pannello posteriore
1
2
3
4
5
6
7
8
9
VIDEO
OUT
FM ANT
SPEAKERS OUT
DIGITAL
AUDIO IN
HDMI OUT
FA NET
(Only For Service)
OPTICAL
COMPONENT
OUT
AUX IN
SURROUND
SUBWOOFER
SURROUND
La ventola è sempre in funzione quando l'apparecchio è acceso. Durante l'installazione
del prodotto, verificare che su tutti i lati della ventola ci siano almeno 10cm di spazio
libero.
VENTOLA DI RAFFREDDAMENTO
1
CONNETTORI DI USCITA DEI DIFFUSORI
Collegare i diffusori anteriore, centro, surround e subwoofer.
2
3
CONNETTORE DI INGRESSO OTTICO
DIGITALE ESTERNO (DIGITAL AUDIO IN)
Per collegare un dispositivo esterno con uscita digitale.
Utilizzando un cavo HDMI, collegare questo terminale di uscita HDMI al
terminale di ingresso HDMI del televisore per la migliore qualità
dell'immagine.
CONNETTORE HDMI OUT
4
Per il collegamento all'uscita analogica 2CH di un dispositivo esterno (come ad
esempio un videoregistratore).
CONNETTORI AUX IN
5
6
Collegare il jack di ingresso video del televisore (VIDEO IN) al connettore
VIDEO OUT.
CONNETTORE VIDEO OUT
CONNETTORI DI USCITA VIDEO
COMPONENT
Per collegare un televisore con ingressi video Component a questi
connettori.
7
RETE FA (Solo Per L'assistenza)
CONNETTORE ANTENNA FM
Usata per la riparazione manutenzione.
Per collegare l'antenna FM.
8
9
1ꢀ
Italiano
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 12
2011-03-05 �� 11:33:27
Remote Telecomando
Descrizione del telecomando
Tasto di selezione del modo.
o
FUNCTION
TV SOURCE
POWER
Premere per selezionare il modo
video del televisore.
Accende e spegne il prodotto.
Per passare al modo TV, premere il
tasto TV.
Impostare un'ora di disattivazione
per spegnere il prodotto.
Per aprire e chiudere il vano del
disco.
RECEIVER
SLEEP
DVD
TV
Per passare all'Home Cinema,
premere il tasto DVD.
1
4
7
2
5
8
0
3
6
Premere i tasti numerici per attivare le
opzioni.
9
DSP /EQ
Selezionare il modo audio Dolby Pro Logic
II desiderato.
Selezionare il modo audio DSP/EQ
desiderato.
Premere per cercare avanti o
indietro.
Premere per saltare in avanti o all'indietro.
Premere per arrestare/riprodurre un
disco.
Disattiva temporaneamente l'audio.
Premere per mettere in pausa un
disco.
MUTE
Cerca le stazioni FM attive e
cambia canale.
Regola il volume.
TUNING
/CH
VOL
DISC MENU
TOOLS
REPEAT
MENU
Permette di ripetere un titolo, un
capitolo, una traccia o un disco.
Premere questo per passare al
menu della pagina iniziale.
TITLE MENU
Premere per aprire il menu del disco.
Per accedere al menu Title (Titolo).
INFO
Per cambiare la lingua dell'audio/dei
sottotitoli, l'angolazione, ecc.
Mostra lo stato del disco (o file)
corrente.
Selezionare e cambiare le voci del
menu a video.
Premere questo tasto per uscire
dal menu.
RETURN
EXIT
D
Ritorna al menu precedente.
Permette di accedere alle funzioni
comuni del prodotto, come Lista foto.
A
B
C
Selezionare il modo P.BASS o
MP3 Enhancement desiderato.
AUDIO
DIMMER
GIGA
S.VOL
UPSCALE
Regola la luminosità del display.
Regola e stabilizza il volume in
modo che non possa cambiare
improvvisamente.
P.BASS
TUNER
Per attivare/disattivare la funzione GIGA
S/W LEVEL
MEMORY
MO/ST
USB REC
Sound (GIGA Sound).
Per regolare il livello del subwoofer.
Premere per selezionare le stazioni FM.
Per avviare la registrazione USB.
Selezionare MONO o STEREO per
la trasmissione radio.
Italiano
1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 13
2011-03-05 �� 11:33:28
Operazioni preliminari
Inserimento delle batterie nel telecomando
Elenco codici marche TV
Marca
Codice
Marca
Codice
Admiral
56, 57, 58
MTC
NEC
18
* Tipo batterie: AAA
(M.Wards)
A Mark
Anam
AOC
01, 15
18, 19, 20, 40, 59, 60
01, 02, 03, 04, 05, 06,
07, 08, 09, 10, 11,
12, 13, 14
Nikei
03
01, 18, 40, 48
Onking
Onwa
03
03
Bell & Howell
(M.Wards)
57, 58, 81
06, 07, 08, 09, 54, 66,
67, 73, 74
Brocsonic
Candle
59, 60
18
Panasonic
Penney
Philco
18
✎
NOTA
03, 15, 17, 18, 48, 54,
59, 62, 69, 90
15, 17, 18, 40, 48,
54, 62, 72
Cetronic
03
`
Inserire le batterie nel telecomando rispettando la polarità:
(+) con (+) e (–) con (–).
Sostituire sempre tutte le batterie insieme.
Non esporre le batterie a fonti di calore o fiamme libere.
Il telecomando ha una portata di circa 7 metri in linea d'aria.
Citizen
03, 18, 25
Philips
Cinema
Classic
97
03
18
46
15
Pioneer
Portland
Proton
63, 66, 80, 91
`
`
`
15, 18, 59
Concerto
Contec
40
Quasar
06, 66, 67
Coronado
Radio Shack
RCA/
17, 48, 56, 60, 61, 75
18, 59, 67, 76, 77, 78,
92, 93, 94
Impostazione del telecomando
Il telecomando consente di controllare determinate
funzioni del televisore.
Craig
03, 05, 61, 82, 83, 84
Proscan
Realistic
Croslex
Crown
62
03
03, 19
Sampo
Samsung
Sanyo
40
00, 15, 16, 17, 40, 43, 46,
47, 48, 49,
Curtis Mates
CXC
59, 61, 63
03
19, 61, 65
Per comandare il televisore con il telecomando
1. Premere il tasto TV per impostare il
telecomando sul modo TV.
02, 03, 04, 15, 16, 17, 18,
19, 20, 21, 22, 23, 24, 25,
26, 27, 28, 29, 30, 32, 34,
35, 36, 48, 59, 90
Daewoo
Scott
03, 40, 60, 61
2. Premere il tasto di ACCENSIONE per
accendere il televisore.
Daytron
Dynasty
40
Sears
Sharp
15, 18, 19
15, 57, 64
03
Signature
3. Tenendo premuto il tasto di ACCENSIONE
,
03, 15, 40, 46, 59, 61,
64, 82, 83, 84, 85
Emerson
2000
57, 58
inserire il codice corrispondente alla marca del
proprio televisore.
(M.Wards)
Fisher
Funai
19, 65
03
Sony
50, 51, 52, 53, 55
Soundesign
Spectricon
03, 40
01
~
~
Se nella tabella sono riportati più codici per il
proprio televisore, inserirne uno per volta per
individuare quello giusto.
Futuretech
General
Electric (GE)
03
06, 40, 56, 59, 66,
67, 68
SSS
18
18, 40, 48, 54, 59,
60, 62
Hall Mark
40
Sylvania
Esempio: Per un televisore Samsung
Hitachi
Inkel
15, 18, 50, 59, 69
Symphonic
Tatung
61, 95, 96
Tenendo premuto il tasto di ACCENSIONE
usare i tasti numerici per inserire i codici 00, 15,
16, 17 e 40.
,
45
56, 59, 67, 86
70
06
18
JC Penny
JVC
Techwood
Teknika
TMK
03, 15, 18, 25
18, 40
4. Se il televisore si spegne, l'impostazione è
KTV
59, 61, 87, 88
03, 15, 40
15
terminata.
~
KEC
Toshiba
Vidtech
19, 57, 63, 71
18
È possibile utilizzare i tasti di ACCENSIONE
del televisore, VOLUME, CANALE e i tasti
numerici (0~9).
KMC
01, 15, 16, 17, 37, 38,
39, 40, 41, 42, 43, 44
LG (Goldstar)
Luxman
Videch
Wards
Yamaha
York
59, 60, 69
15, 17, 18, 40, 48,
54, 60, 64
18
19, 54, 56, 59, 60, 62,
63, 65, 71
15, 17, 18, 48, 54, 59,
60, 62, 72, 89
✎
NOTA
LXI (Sears)
Magnavox
18
`
È possibile che il telecomando non funzioni o non
possa eseguire certi comandi con alcuni tipi di TV.
Per impostazione predefinita, il telecomando funziona
con televisori Samsung.
40
Marantz
Matsui
MGA
Mitsubishi/
MGA
40, 54
Yupiteru
Zenith
03
58, 79
01
54
`
18, 40
Zonda
18, 40, 59, 60, 75
Dongyang
03, 54
1ꢂ
Italiano
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 14
2011-03-05 �� 11:33:28
Collegamenti
Questa sezione illustra vari metodi per collegare il prodotto ad altri componenti esterni.
Prima di spostare o installare il prodotto, spegnere l'apparecchio e staccare il cavo di alimentazione.
Collegamento dei diffusori
Posizione del prodotto
Sistemarlo su un supporto, sul ripiano di un
mobile o nel mobile sotto la TV.
SW
Determinazione della posizione di
2,5 - 3 volte il formato del televisore
ascolto
La posizione di ascolto deve essere situata,
rispetto al televisore, ad una distanza pari a circa
2,5 - 3 volte il formato del televisore.
Esempio : Per un televisore da 32" 2 - 2,4 m
Per un televisore da 55" 3,5 - 4 m
Posizionare questi diffusori davanti alla posizione di ascolto; devono essere rivolti
verso l'interno (di circa 45°), in direzione dell'ascoltatore. Posizionare i diffusori in
modo che i tweeter si trovino all'altezza dell'orecchio dell'ascoltatore. Allineare la
parte frontale dei diffusori anteriori con la parte frontale del diffusore centrale o
disporli leggermente più avanti rispetto al diffusore centrale.
Diffusori anteriori ei
Si consiglia di posizionarlo alla stessa altezza dei diffusori anteriori. Può essere
posizionato anche sopra o sotto il televisore.
Diffusore centrale
f
Posizionare questi diffusori ai lati della posizione di ascolto. Se non vi è spazio
sufficiente, posizionare i diffusori in modo che siano rivolti l'uno verso l'altro.
Posizionarli a circa 60-90 cm sopra l'orecchio dell'ascoltatore, leggermente
rivolti verso il basso.
Diffusori surroundhj
A differenza dei diffusori anteriori e centro, i diffusori surround servono
*
principalmente per gestire gli effetti sonori; non emettono sempre suoni.
La posizione del subwoofer non è molto rilevante. Posizionarlo dove si preferisce.
Subwoofer
g
!
ATTENZIONE
`
Non lasciar giocare i bambini con i diffusori o nelle loro vicinanze. La caduta di un diffusore potrebbe
provocare lesioni.
`
`
Per collegare i cavi dei diffusori ai diffusori, rispettare la polarità (+/ –).
Tenere il subwoofer lontano dalla portata dei bambini per impedire che mettano le mani o introducano oggetti
nel condotto (foro) dello stesso.
`
Non appendere il subwoofer alla parete dal condotto (foro).
✎
`
NOTA
Se si colloca un diffusore vicino al televisore, i colori dello schermo potrebbero apparire distorti a causa del
campo magnetico generato dal diffusore. Se ciò si verifica, allontanare il diffusore dal televisore.
Italiano
1ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 15
2011-03-05 �� 11:33:29
Collegamenti
Composizione dei diffusori
HT-D450
(L)
(R)
(L)
(R)
ANTERIORI
ꢀ
SURROUND
CENTRALEꢀ
SUBWOOFER
ꢀ
CAVIꢀDIFFUSORI
Composizione dei diffusori
Diffusori montati
HT-D453
HT-D453
(L) (R)
VITIꢀ(5×15):ꢀxꢀ2
ꢀ
VITIꢀ(4×20):ꢀxꢀ8
ꢀ
DIFFUSORE CENTRALE
CENTRALEꢀ
ANTERIORI
ꢀ
SUPPORTIꢀ
(L) (R)
DIFFUSORE
SURROUND
CAVIꢀ
DIFFUSORI
DIFFUSORI
ANTERIORI
SUBWOOFER
BASIꢀSUPPORTI SUBWOOFER
ꢀ
SURROUND
HT-D455
HT-D455
(L) (R)
VITIꢀ(5×15):ꢀxꢀ4
VITIꢀ(4×20):ꢀxꢀ16
DIFFUSORE CENTRALE
ANTERIORI
ꢀ
SUPPORTIꢀ
(L) (R)
CENTRALEꢀ
SUBWOOFER
SUBWOOFER
ꢀ
DIFFUSORI ANTERIORIꢀ
SURROUND
BASIꢀSUPPORTI
/ SURROUND
CAVIꢀDIFFUSORI
✎
`
NOTA
Vedere a pagina 17 per installare i diffusori sul supporto a colonna.
1ꢄ
Italiano
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 16
2011-03-05 �� 11:33:50
Installazione dei diffusori sul supporto a colonna
* Solo HT-D453 - Diffusori anteriori
1
2
4
* Solo HT-D455 - Diffusori anteriori/ surround
1. Capovolgere la base del supporto e collegarla al
supporto.
2. Utilizzando un cacciavite, inserire le viti piccole (4*20, per
fissare il supporto all'apposita base) in senso orario nei
Base
supporto
Supporto
quattro fori marcati, come mostrato nella figura.
3
Diffusore
Supporto
!
ATTENZIONE : Quando si utilizza un cacciavite
dinamometrico, prestare attenzione a non esercitare
una forza eccessiva. Altrimenti, gira a vuoto o si rischia
di danneggiarlo. (cacciavite dinamometrico – inferiore a
15 kg.f.cm)
3. Collegare il diffusore superiore al supporto montato.
4. Servendosi di un cacciavite, inserire un’altra vite grande
(5*15, per collegare il diffusore al supporto) in senso orario
5
nel foro sulla parte posteriore del diffusore.
5. Questo è il risultato, dopo aver installato il diffusore.
Seguire questi passi per installare gli altri diffusori.
Collegamento dei diffusori
1. Premere verso il basso la linguetta del morsetto sul retro del diffusore.
2. Inserire il filo nero nel morsetto nero (–) e il filo rosso nel morsetto rosso (+),
quindi rilasciare la linguetta.
3. Collegare le spine sul retro del prodotto facendo corrispondere i colori delle
Nero
Rosso
spine con quelli dei connettori.
Per il modello HT-D450
Diffusore centrale
Diffusore anteriore (R)
Diffusore anteriore (L)
Diffusore Surround (R)
Diffusore Surround (L)
Subwoofer
* Vedere a pagina 16 per i diffusori di HT-D453/D455.
Italiano
1ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 17
2011-03-05 �� 11:33:54
Collegamenti
Collegamento dell'uscita video al televisore
Selezionare uno dei quattro metodi per il collegamento a un televisore.
METODO 3
SCART IN
METODO 4 (fornito)
Verde
G
D
Blu
T
Rosso
METODO 2
METODO 1
METODO 1: HDMI
Collegare un cavo HDMI (non fornito) tra il connettore HDMI OUT nella parte posteriore del prodotto e il
connettore HDMI IN del televisore.
METODO 2: Video Component
Se il televisore è dotato di ingressi video Component, collegare un cavo video Component (non fornito) tra i
connettori COMPONENT OUT (Y, PB e PR) sul retro del prodotto e i connettori di ingresso video Component
del televisore.
METODO 3: Scart
Se il televisore è dotato di ingresso SCART, collegare il cavo video fornito tra il connettore VIDEO OUT sul
retro del prodotto e il connettore VIDEO sull'adattatore SCART, quindi collegare il connettore dell'adattatore
SCART al connettore SCART IN sul televisore.
METODO 4: Video composito
Collegare il cavo video fornito tra il connettore VIDEO OUT nella parte posteriore del prodotto e il connettore
VIDEO IN sul televisore.
1ꢆ
Italiano
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 18
2011-03-05 �� 11:33:55
✎
`
NOTA
Le risoluzioni disponibili per l'uscita HDMI sono 480p (576p), 720p,1080i/1080p. Vedere a pagina 23 per
l'impostazione della risoluzione.
Questo prodotto opera in modo scansione interlacciata 480i(576i) per l'uscita Component/composita.
Dopo aver eseguito il collegamento video, impostare la sorgente di ingresso video del televisore in modo che
corrisponda al modo di uscita video del prodotto.
`
`
Accendere questo prodotto prima di impostare la sorgente di ingresso video sul televisore. Per ulteriori
informazioni su come selezionare la sorgente di ingresso video del televisore consultare il manuale del
televisore.
! ATTENZIONE
`
Non collegare l'unità attraverso un videoregistratore. I segnali video inviati dai videoregistratori potrebbero
essere influenzati da sistemi di protezione del copyright, facendo risultare distorta l'immagine sul televisore.
FUNZIONE HDMI
Funzione di rilevamento automatico HDMI
Se il televisore è un TV Samsung e supporta funzioni CEC, l'uscita video del prodotto passa automaticamente al modo
HDMI se si collega un cavo HDMI mentre l'apparecchio è acceso.
~
HDMI (interfaccia multimediale ad alta definizione)
~
HDMI è un'interfaccia che consente la trasmissione di dati audio e video digitali usando un solo connettore.
Se il televisore dispone di un connettore di ingresso HDMI, questa interfaccia consente al prodotto di
trasmettere un segnale audio e video digitale e di visualizzare sul televisore un'immagine vivida.
~
Descrizione del collegamento HDMI
- HDMI trasmette al televisore solo un segnale digitale puro.
- Se il televisore non supporta la funzione HDCP (High-bandwidth Digital Content Protection), l'immagine a video
appare disturbata.
~
~
Che cosa è l'HDCP?
HDCP (High-band width Digital Content Protection) è un sistema di protezione da copia dei contenuti dei
DVD trasmessi attraverso HDMI. Fornisce un collegamento digitale sicuro tra una sorgente video (PC, DVD,
ecc.) e un dispositivo di visualizzazione (TV, proiettore, ecc.). Il contenuto viene crittografato sul dispositivo
di origine per impedire che vengano prodotte copie non autorizzate.
Utilizzo di Anynet+ (HDMI-CEC)
Anynet+ è una funzione che può essere utilizzata per comandare altri dispositivi Samsung utilizzando il
telecomando di un televisore Samsung. La funzione Anynet+ può essere utilizzata collegando questo
prodotto ad un televisore SAMSUNG mediante un cavo HDMI. Questa possibilità è disponibile soltanto con i
televisori SAMSUNG che supportano Anynet+.
1. Collegare il prodotto a un televisore Samsung con un cavo HDMI. (Vedere a pagina 18)
2. Impostare la funzione Anynet+ sul televisore. (Per ulteriori informazioni, consultare il manuale di istruzioni
del televisore).
✎
`
NOTA
La funzione Anynet+ supporta alcuni tasti del telecomando.
Questa funzione non è disponibile se un cavo HDMI non supporta CEC.
`
`
Su alcuni televisori, alcune risoluzioni di uscita HDMI potrebbero non essere utilizzabili. Consultare il manuale utente
del televisore.
`
Verificare la presenza del logo
(se il televisore ha il logo
, significa che supporta la funzione Anynet+).
Italiano
1ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 19
2011-03-05 �� 11:33:55
Collegamenti
Collegamento dell'antenna FM
Antenna FM (fornita)
SPEAKERS OUT
DIGITAL
AUDIO IN
OPTICAL
SURROUND
SUBWOOFER
SURROUND
1. Collegare l'antenna FM fornita al connettore antenna FM.
2. Muovere lentamente il filo dell'antenna finché non si trova una posizione con una buona ricezione, quindi
fissarlo a un muro o a un'altra superficie rigida.
✎
`
NOTA
Questo prodotto non riceve le trasmissioni AM.
ꢀ0
Italiano
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 20
2011-03-05 �� 11:33:55
Collegamento dell'audio da apparecchi esterni
S
Bianco
Rosso
D
Cavo audio (non fornito)
Se il componente analogico
esterno ha una sola uscita audio,
collegarlo a sinistra o a destra.
Cavo ottico
(non fornito)
Set-Top Box
OTTICO
VCR
AUX
AUX : Collegamento di un componente analogico esterno
Componenti con segnale analogico come un videoregistratore.
1. Collegare AUX IN (Audio) nella parte posteriore del prodotto all'uscita audio del componente analogico
esterno.
~
Assicurarsi che i colori dei connettori corrispondano.
2. Premere il tasto FUNCTION per selezionare l'ingresso AUX.
~
I modi vengono selezionati nella sequenza seguente:
DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM
✎
`
NOTA
È possibile collegare il connettore di uscita video del videoregistratore al televisore e collegare i connettori di
uscita audio del videoregistratore a questo prodotto.
OTTICO : Collegamento di un componente digitale esterno
Per apparecchi con segnale digitale come ad es. ricevitore per TV via cavo/ricevitore satellitare (Set-Top Box).
1. Collegare DIGITAL AUDIO IN (OPTICAL) sul retro del prodotto all'uscita digitale del componente
digitale esterno.
2. Premere il tasto FUNCTION per selezionare D.IN
~
I modi vengono selezionati nella sequenza seguente:
DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM
Italiano
ꢀ1
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 21
2011-03-05 �� 11:33:56
Configurazione
Operazioni preliminari (impostazioni iniziali)
Impostazione del menu di configurazione
Il passo da eseguire per accedere può variare a
seconda del menu selezionato. La GUI (interfaccia
utente grafica) di questo manuale potrebbe non
corrispondere a quanto qui riportato. Ciò dipende
dalla versione del firmware.
1. Al primo collegamento con il televisore, premere
il tasto di ACCENSIONE. Viene visualizzata la
schermata di configurazione iniziale.
Initial settings > On-Screen Language
Select a language for the on-screen displays
1
English
한국어
Nederlands
Français
Deutsch
Italiano
3
4
>
Move
"
Select
A
D
2
B
C
2. Premere i tasti ▲ ▼ per selezionare la lingua
desiderata, quindi premere il tasto INVIO.
3. Premere il tasto INVIO per selezionare il pulsante Start.
1
TASTO MENU : Visualizza il menu principale.
4. Premere i tasti ▲▼ per selezionare il formato
desiderato per il televisore, quindi premere il tasto
INVIO.
TASTO RETURN : Ritorna al menu di
2
configurazione precedente.
TASTO INVIO / DIREZIONE
`
Se al prodotto è collegato il cavo HDMI, il formato del
televisore non appare.
Spostare il cursore e selezionare una voce.
Selezionare la voce evidenziata.
Confermare l'impostazione.
3
4
✎ NOTA
TASTO EXIT : Esce dal menu di configurazione.
`
Nel caso non sia stata selezionata una lingua preferita
nelle impostazioni iniziali, all'accensione del prodotto
viene visualizzata una finestra di selezione della lingua.
La selezione della lingua si applica a tutti i menu: Menu
a video, Disc Menu (Menu Disco), Audio (Audio), Subtitle
(Sottotitolo).
Per tornare alla schermata precedente, premere il
pulsante RETURN.
Una volta selezionata la lingua per il menu, è possibile
cambiarla premendo il tasto di ARRESTO (@) sul
telecomando per almeno 5 secondi senza nessun
disco inserito.
`
Impostazioni
`
`
Function DVD/CD
`
Se la schermata Initial Setting (Impostazione iniziale)
non viene visualizzata, vedere Impostazione iniziale.
(Vedere a pagina 26)
1. Premere il tasto di ACCENSIONE.
2. Premere i tasti ◄► per selezionare
Impostazioni, quindi premere il tasto INVIO.
3. Premere i tasti ▲▼ per selezionare il menu
desiderato, quindi premere il tasto INVIO.
4. Premere i tasti ▲▼ per selezionare il sottomenu
desiderato, quindi premere il tasto INVIO.
5. Premere i tasti ▲▼ per selezionare la voce
desiderata, quindi premere il tasto INVIO.
6. Premere il tasto EXIT per uscire dal menu di
configurazione.
ꢀꢀ
Italiano
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 22
2011-03-05 �� 11:33:57
✎
NOTA
Display
`
Questo ottimizzerà la qualità dell'immagine in
funzione del contenuto (del disco, del DVD,
ecc.) da riprodurre e del prodotto o del
televisore Samsung compatibile con BD Wise.
Se si vuole cambiare la risoluzione in modo BD
Wise, si deve prima impostare BD su Off.
La funzione BD Wise (BD Wise) viene disattivata
se il prodotto è collegato a un dispositivo che
non la supporta.
È possibile configurare diverse opzioni per il display,
quali formato, risoluzione, ecc.
Formato del televisore
Per alcuni tipi di televisore, è possibile che si desideri
regolare l'impostazione dello schermo.
`
`
~
4:3 Pan-Scan
Selezionare questa opzione se si
desidera vedere il formato video 16:9
fornito dal DVD senza le fasce nere
in basso e in alto anche se si ha un
televisore con formato 4:3 (le porzioni
all'estrema destra e all'estrema sinistra
dell'immagine verranno tagliate).
Risoluzione
Imposta la risoluzione di uscita del segnale video HDMI. Il
numero di 480p (576p), 720p, 1080i e 1080p indica il
numero di linee del video.
“i” e “p” indicano rispettivamente la scansione interlacciata
e progressiva.
~
~
4:3 Letter Box
16:9 Wide
~
~
~
~
~
480p(576p) : 480 linee a scansione progressiva.
720p : 720 linee a scansione progressiva.
Selezionare questa opzione per
utilizzare il massimo rapporto larghezza/
altezza 16:9 fornito dal DVD anche se
si usa un televisore con un rapporto
4:3. In cima e in fondo alla schermata
appaiono fasce nere.
1080i : 1080 linee a scansione interlacciata.
1080p : 1080 linee a scansione progressiva.
BD Wise : imposta automaticamente la risoluzione ottimale
quando è connesso ad un televisore attraverso HDMI con la
funzione BD Wise. (La voce di menu BD Wise viene
visualizzata solo se BD Wise è impostato su On).
È possibile visualizzare l'intera immagine
in 16:9 sul televisore panoramico.
✎
NOTA
`
Se è collegato un cavo Component o composito,
la risoluzione supporta solo 480i(576i).
1080P potrebbe non essere compatibile con
alcuni televisori.
`
✎
NOTA
`
Quando si utilizza la funzione HDMI, il televisore passa
automaticamente a 16:9 Wide e il formato viene disattivato.
Se un DVD è in formato 4:3, non è possibile vederlo in
formato panoramico.
Poiché i dischi DVD sono registrati in vari formati,
saranno diversi a seconda del software, del tipo di
televisore e dell'impostazione del formato dello schermo.
Formato HDMI
È possibile ottimizzare l'impostazione colore dall'uscita
HDMI. Selezionare il tipo di dispositivo collegato.
`
`
~
Monitor : selezionare in caso di collegamento a un
monitor tramite HDMI.
TV : selezionare in caso di collegamento al televisore
tramite HDMI.
~
BD Wise
Segn. uscita video
(Solo prodotti Samsung)
BD Wise è la funzione di interconnettività Samsung di
ultima generazione. Quando i prodotti Samsung con
BD-Wise vengono collegati tra loro tramite HDMI, viene
impostata automaticamente la risoluzione ottimale.
Paesi diversi applicano standard TV diversi.
È possibile selezionare i formati NTSC o PAL.
~
NTSC : È possible selezionare il formato video
NTSC
~
Si : la risoluzione originale del disco DVD viene
inviata direttamente al televisore.
~
PAL : È possible selezionare il formato video PAL
~
No : la risoluzione di uscita sarà stabilita in
base alla risoluzione impostata in precedenza,
indipendentemente da quella del disco.
Italiano
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 23
2011-03-05 �� 11:33:59
Configurazione
Regolazione bil. ant./surround
Audio
`
È possibile selezionare un valore compreso tra 0 e -6.
Il volume diminuisce più ci si avvicina a -6.
`
Impostazione Diffusori
Regolazione del livello dei diffusori centro/surround/
subwoofer
Dimensione altoparl.
`
Il livello del volume può essere regolato tra +6dB
e –6dB.
Il livello dell'audio aumenta più ci si avvicina a
+6dB e si abbassa più ci si avvicina a -6dB.
In questa modalità è possibile impostare le dimensioni dei
diffusori centrale, posteriori e anche il tono di test.
`
Impostazioni
Impostazione Diffusori
Tempo Ritardo
Dimensione altoparl.
BAL Ant.
▶
Se i diffusori non possono essere collocati a uguale
distanza dalla posizione di ascolto, è possibile regolare il
ritardo dei segnali audio dei diffusori centro e surround.È
anche possibile impostare il tono di test in questo modo.
Tempo Ritardo
Test Tone
:
No
"
Seleziona
'
Ritorna
mSposta
"
Seleziona
'
Ritorna
Impostazione del ritardo dei diffusori
Per la riproduzione di audio surround a 5.1 canali,
l'effetto migliore si ottiene se la distanza tra l'utente e
ogni diffusore è la stessa.
~
Per i diffusori anteriori, il modo è impostato su
Picco..
Dato che i suoni arrivano nella posizione di ascolto in
tempi diversi a seconda della collocazione dei
diffusori, è possibile regolare questa differenza
aggiungendo un effetto di ritardo ai diffusori centro e
~
~
Per il subwoofer, il modo è impostato su Ora.
Per i diffusori centro e posteriori è possibile
selezionare i modi Picco. o Ness..
- Picco. : selezionare questa opzione per
surround.
utilizzare i diffusori.
- Ness. : selezionare questa opzione quando non
Impostazioni
è collegato nessun diffusore.
Tempo Ritardo
Fronte
✎
`
NOTA
Centro
:
:
00mSEC
10mSEC
Surround
Subwoofer
Test Tone
Il modo diffusori può variare a seconda delle
impostazioni Dolby Pro Logic e Stereo.
:
No
BAL Ant.
<
Cambia
"
Seleziona
'
Ritorna
Ritorna
È possibile regolare il bilanciamento e il livello di ogni
diffusore.
mSposta
"
Seleziona
'
Impostazioni
BAL Ant.
✎
NOTA
Bilan. ant.
dB L
dB L
R
R
dB
dB
`
Il menu Delay Time (Tempo ritardo) viene attivato solo
quando viene riprodotta la sorgente a 5.1 canali.
Bil.surround
Liv. Cent.
Liv.surround
Liv. SW
dB
dB
dB
`
Non è possibile impostare Centro e Surround in questo
modo quando le dimensioni di tali diffusori sono
impostate su Ness..
<Cambia
"
Seleziona
Seleziona
'
Ritorna
Ritorna
mSposta
"
'
Premere i tasti ▲▼ per selezionare e regolare il
diffusore desiderato.
Premere i tasti ◄► per regolare le impostazioni.
ꢀꢂ
Italiano
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 24
2011-03-05 �� 11:34:00
Test Tone
Posizione ideale del
diffusore centro
Impostazioni
Impostazione Diffusori
Dimensione altoparl.
BAL Ant.
Tempo Ritardo
Test Tone
:
Si
▶
Posizione ideale del
diffusore surround
"
Seleziona
'
Ritorna
m
Sposta
"
Seleziona
'
Ritorna
È preferibile posizionare tutti i diffusori all'interno di questo cerchio.
Utilizzare la funzione Tono di test per controllare i
collegamenti dei diffusori.
Df: distanza dal diffusore anteriore
Dc: distanza dal diffusore centro
Ds: Distanza dal diffusore surround
~
Premere i tasti ◄► per selezionare Si.
~
Il tono di test verrà inviato in sequenza ai diffusori
Anteriore sinistro ➞ Centro ➞ anteriore destro
➞ Surround destro ➞ Surround sinistro ➞
Subwoofer.
Impostazione del diffusore centrale
Per arrestare il tono di test, premere il tasto INVIO.
Se la distanza Dc è uguale o superiore alla distanza Df nella
figura, impostare il modo su 0 ms.
In caso contrario cambiare l'impostazione secondo la tabella.
DRC (compressione del livello audio)
Questa funzione permette il bilanciamento tra i suoni
più alti e quelli più bassi. Questa funzione permette
di apprezzare l'audio Dolby Digital quando si
guardano film a basso volume di notte.
Distanza
tra Df e
Dc
0,00m 0,34m 0,68m 1,06m 1,40m 1,76m
Ritardo 00 ms 01 ms 02 ms 03 ms 04 ms 05 ms
~
È possibile selezionare Pieno, 6/8, 4/8, 2/8 o No.
SINC. AUDIO
Impostazione del diffusore surround
La sincronizzazione audio e video potrebbe non
corrispondere con la TV digitale.
Se la distanza Dc è uguale o superiore alla distanza Ds nella
figura, impostare il modo su 0 ms.
Se si verifica questo inconveniente, regolare il ritardo
dell'audio per sincronizzarlo con il video.
In caso contrario cambiare l'impostazione secondo la tabella.
Distanza
tra Df e
Ds
~
È possibile impostare un ritardo dell'audio
compreso tra 0 ms e 300 ms. Impostarlo al livello
ottimale.
0,00m 1,06m 2,11m 3,16m 3,62m 5,29m
Ritardo 00 ms 03 ms 06 ms 09 ms 12 ms 15 ms
AUDIO HDMI
I segnali audio trasmessi tramite il cavo HDMI
possono essere attivati o disattivati.
✎
NOTA
Con
`
`
`
PL II (Dolby Pro Logic II), il ritardo
potrebbe essere diverso per ogni modo.
AC-3 e DTS, il ritardo può essere impostato tra
00 e 15 mSEC.
Il canale centrale è regolabile solo sui dischi a 5.1
canali.
~
No : il video è trasmesso solo tramite il cavo di
collegamento HDMI e l'audio viene emesso
solo tramite i diffusori del prodotto.
Si : i segnali sia video sia audio vengono trasmessi
tramite il cavo di collegamento HDMI, e l'audio
viene emesso solo tramite gli altoparlanti del
televisore.
~
Italiano
ꢀꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 25
2011-03-05 �� 11:34:01
Configurazione
✎
NOTA
System
`
L'impostazione predefinita di questa funzione è
HDMI Audio Off.
Impostazione iniziale
`
`
`
HDMI Audio viene convertito automaticamente in
2 canali per gli altoparlanti del televisore.
Utilizzando le impostazioni iniziali, è possibile impostare la
lingua e il formato TV.
Quando HDMI Audio è impostato su On, PL II /
DSP EQ /P.BASS non funzionano.
✎
`
NOTA
Impostando AUDIO HDMI su "Si", è possibile
regolare il volume solo utilizzando il
telecomando del televisore.
Se il cavo HDMI è collegato al prodotto, il
formato TV non appare e viene impostato
automaticamente su 16:9 Wide.
EQ utente
Registrazione DivX(R)
È possibile configurare le impostazioni di equalizzazione
manualmente in base alle proprie preferenze.
Vedere il codice di registrazione DivX(R) VOD per
acquistare e riprodurre contenuti DivX(R) VOD.
Impostazioni
EQ utente
dB
6
·
·
·
✎
NOTA
·
·
·
`
Questa opzione non è attivata se si seleziona
OK (OK). Per attivare questa opzione, attivare
la disattivazione DivX(R).
Le impostazioni di registrazione DivX non
vengono ripristinate quando si riavvia il sistema.
·
·
·
·
·
·
-6
250Hz 600Hz 1kHz
Reset
3kHz
6kHz 10kHz 15kHz
`
a
>
Regola
<
Sposta
'
Ritorna
m
Sposta
"
Seleziona
'
Ritorna
DivX(R) Disattivazione
✎
`
NOTA
Selezionare questa opzione per ottenere un nuovo
codice di registrazione.
Questo può essere fatto anche utilizzando il tasto
DSP/EQ. (Vedere a pagina 34)
Canale rit. audio
È possibile sentire l'audio del televisore dai diffusori
dell'Home Cinema utilizzando un unico cavo HDMI.
~
No : Disattivare la funzione Canale rit. audio.
~
Auto : Ascoltare l'audio del televisore dai diffusori
dell'Home Cinema se il televisore è compatibile
con la funzione Canale rit. audio.
NOTA
✎
`
Quando Anynet+ (HDMI-CEC) è su Disatt., la
funzione Canale rit. audio non è disponibile.
`
`
L'uso di un cavo HDMI non certificato ARC
(Audio Return Channel-Canale rit. audio) può
causare problemi di compatibilità.
La funzione ARC (Audio Return Channel-
Canale rit. audio) è disponibile solo se è
collegato un televisore compatibile ARC.
ꢀꢄ
Italiano
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 26
2011-03-05 �� 11:34:01
Cambia Password.
Lingua
È possibile selezionare la lingua preferita per il menu
a video, il menu del disco, ecc.
Selezionare Cambia e inserire la password di 4 cifre
per impostare la protezione bambini utilizzando i tasti
numerici sul telecomando.
LINGUA OSD Selezionare la lingua per l'OSD.
Impostazioni
Selezionare la lingua per il menu del
Display
Audio
Livello Blocco : Disattivo
Password : Cambia
Menu Disco
disco.
▶
Sistema
Lingua
Selezionare la lingua per l'audio del
disco.
Selezionare la lingua per i sottotitoli
del disco.
Audio
Sicurezza
Supporto
Sottotitolo
m
Sposta
"
Seleziona
'
Ritorna
a Per selezionare un'altra lingua, selezionare OTHERS
(ALTRO) per Disc Menu (Menu Disco), Audio (Audio)
e Subtitle (Sottotitolo), quindi inserire il codice della
lingua del proprio Paese (vedere a pagina 38).
Se non si ricorda la password
a Non è possibile selezionare OTHERS (ALTRO) nel
1. Rimuovere il disco.
menu OSD Language (Lingua OSD).
2. Tenere premuto il tasto di ARRESTO (@) sul
telecomando per almeno 5 secondi. Tutte le
impostazioni vengono riportate ai valori
predefiniti.
✎
NOTA
`
La lingua selezionata appare solo se è
supportata dal disco.
Supporto
Sicurezza
La funzione di protezione bambini funziona in
combinazione con i DVD a cui è stata assegnata una
classificazione per indicare i tipi di DVD adatti per tutta la
famiglia.
Informazioni prodotto
Fornire le informazioni sul prodotto, quali il codice
del modello, la versione software, ecc.
Esistono 8 livelli di classificazione per i dischi.
Livello Blocco
Selezionare il livello di blocco desiderato.
I numeri più grandi indicano programmi riservati agli
adulti. Ad esempio, se se seleziona fino al livello 6, i
dischi che contengono i livelli 7 o 8 non vengono
riprodotti.
Immettere la password e quindi premere il tasto INVIO
.
- Per impostazione predefinita la password è "0000".
- Una volta completata l'impostazione, si torna alla
schermata precedente.
Italiano
ꢀꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 27
2011-03-05 �� 11:34:01
Funzioni di base
Riproduzione di un disco
Riproduzione di CD audio (CD-DA)/MP3/WMA
1. Premere il tasto di APERTURA/CHIUSURA (^).
BA
2. Inserire delicatamente un disco nel vano, con
l'etichetta rivolta verso l'alto.
3. Premere il tasto APERTURA/CHIUSURA (^)
TRACCIA 01
1/17
per chiudere il vano del disco.
✎
`
NOTA
Funzione di ripresa della riproduzione: quando si
arresta la riproduzione del disco, il prodotto
ricorda il punto dell'interruzione; così, quando si
preme di nuovo il tasto di RIPRODUZIONE, la
riproduzione riprende da dove è stata interrotta.
(Questa funzione è disponibile soltanto per i DVD).
Premere il tasto di ARRESTO due volte durante
la riproduzione per disattivare la funzione di
ripresa della riproduzione.
0:15
/
3:59
Function DVD/CD
Repeat Modo Ripr.
1. Inserire un CD audio (CD-DA) o un disco MP3 nel
vano del disco.
~
Per i CD audio, la prima traccia viene
riprodotta automaticamente.
`
Quando il prodotto è in pausa, se non si preme
nessun tasto sul prodotto o sul telecomando per
più di 3 minuti, passa al modo di Arresto.
- Premere i tasti [] per passare alla
traccia precedente/successiva.
~
Per i dischi MP3/WMA, premere i tasti ◄►
per selezionare Musica, quindi premere il
tasto INVIO.
- Premere i tasti ▲▼◄► per selezionare il
file desiderato, quindi premere il tasto
INVIO.
`
`
La schermata iniziale può essere diversa a
seconda del contenuto del disco.
I dischi piratati non vengono riprodotti da questo
prodotto perché violano il CSS (Content
Scrambling System: sistema di protezione contro
la copia).
- Premere i tasti () per passare alle
pagine precedenti/successive.
a
viene visualizzato quando viene premuto un
tasto non valido.
2. Premere il tasto di ARRESTO (@) per arrestare la
riproduzione.
Funzione di salvaschermo TV/risparmio
energia
✎
NOTA
`
A seconda del modo di registrazione, alcuni CD
MP3/WMA potrebbero non essere riprodotti.
Il sommario dei CD MP3 varia a seconda del
formato delle tracce MP3/WMA registrate sul disco.
I file WMA-DRM non possono essere riprodotti.
~
Se in modo di arresto o di riproduzione non viene
premuto nessun tasto per più di 5 minuti si attiva il
salvaschermo.
`
`
~
Se il salvaschermo viene lasciato in funzione per
oltre 20 minuti, l'unità si spegne automaticamente.
(Tranne durante la riproduzione di musica)
ꢀꢆ
Italiano
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 28
2011-03-05 �� 11:34:01
Riproduzione di file JPEG
Utilizzo della funzione di riproduzione
Le immagini riprese con una fotocamera o una
videocamera e i file JPEG memorizzati su PC possono
essere copiati su CD e riprodotti con questo prodotto.
Ricerca avanti/indietro
dBAD
1. Inserire un disco JPEG nel vano del disco.
2. Premere i tasti ◄► per selezionare Foto, quindi
Premere i tasti () per la funzione di ricerca.
premere il tasto INVIO.
3. Premere i tasti ▲▼ per selezionare la cartella da
( 1 ➞ ( 2 ➞ ( 3 ➞ ( 4
) 1 ➞ ) 2 ➞ ) 3 ➞ ) 4
riprodurre, quindi premere il tasto INVIO
.
4. Premere i tasti ▲▼ per selezionare la foto da
riprodurre, quindi premere il tasto INVIO.
✎
NOTA
~
~
~
Il file selezionato viene riprodotto e viene
avviata la proiezione delle diapositive.
Per arrestare la proiezione delle diapositive,
premere il tasto di PAUSA (#) .
Per visualizzare i file precedenti/successivi,
premere i tasti ◄, ► nel modo
`
Nel modo di ricerca non viene emesso nessun
suono.
`
`
Durante la ricerca della riproduzione viene
emesso un suono solo a velocità )1 e )2.
Questa funzione è disponibile solo per il CD-DA.
presentazione.
ROOT
Salto di scene/canzoni
JPEG 1
JPEG 2
JPEG 3
dBAD
Premere i tasti [].
~
Ogni volta che si premono questi tasti durante la
riproduzione, vengono riprodotti il capitolo, la
traccia o la cartella (file) precedenti o successivi.
642 X 352
2010/01/01
Function DVD/CD
Pagina
Ritorna
~
Non è possibile saltare capitoli consecutivamente.
Funzione di rotazione
Riproduzione al rallentatore
G
dD
Premere i tasti VERDE (B) o GIALLO (C) in modo PAUSA.
Premere il tasto PAUSA (#) e quindi il tasto )per
la riproduzione al rallentatore.
~
~
Tasto VERDE (B): ruota di 90° in senso antiorario.
Tasto GIALLO (C) : ruota di 90° in senso orario.
ꢀ
d
D
✎
`
NOTA
*1 ➞*2 ➞*3
Le risoluzioni massime supportate da questo
prodotto sono 5120 x 3480 (o 19.0 MPixel) per i
file JPEG standard e 2048 x 1536 (o 3.0 MPixel)
per i file di immagini progressive.
✎
`
NOTA
Non si sente alcun suono durante la riproduzione
rallentata.
`
La riproduzione rallentata all'indietro non funziona.
Italiano
ꢀꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 29
2011-03-05 �� 11:34:02
Funzioni di base
Riproduzione fotogramma per
fotogramma
Utilizzo del menu dei titoli
d
dD
Per i DVD che contengono più titoli, è possibile
visualizzare il titolo di ogni filmato.
Premere ripetutamente il tasto PAUSA .
TITLE MENU
1. Durante la riproduzione, premere il
tasto TITLE MENU sul
telecomando.
~
L'immagine avanza di un fotogramma ogni volta
che si preme questo tasto durante la riproduzione.
✎
`
NOTA
2. Premere i tasti ▲▼◄► per
effettuare la selezione desiderata,
quindi premere il tasto INVIO.
L'audio non è disponibile durante la riproduzione
fotogramma per fotogramma.
✎
`
NOTA
Su alcuni dischi, le voci di impostazione del menu
potrebbero variare e questo menu potrebbe non essere
disponibile.
Funzione di salto di 5 minuti
D
Ripetizione della riproduzione
Durante la riproduzione, premere i tasti ◄,►.
~
La riproduzione salta 5 minuti in avanti ogni volta
dBAD
che si preme il tasto ►.
~
La riproduzione salta 5 minuti all'indietro ogni volta
che si preme il tasto ◄.
Ripetizione DVD/DivX
È possibile ripetere il titolo, il capitolo o la sezione
(ripetizione A-B) del DVD/DivX.
✎
`
NOTA
Questa funzione è disponibile solo per DivX contenenti
informazioni sull'ora.
Ripeti
No
Utilizzo del menu del disco
d
REPEAT
1. Durante la riproduzione DVD/DivX,
premere il tasto REPEAT sul
telecomando.
2. Premere i tasti ▲▼ per selezionare il
modo di ripetizione desiderato, quindi
premere il tasto INVIO.
È possibile visualizzare i menu per la lingua
dell'audio, la lingua dei sottotitoli, il profilo, ecc.
DISC MENU
1. Durante la riproduzione, premere il
tasto DISC MENU sul
telecomando.
3. Premere i tasti ▲▼ per selezionare No per
ritornare alla riproduzione normale, quindi
premere il tasto INVIO.
2. Premere i tasti ▲▼◄► per
effettuare la selezione desiderata,
quindi premere il tasto INVIO.
✎
`
NOTA
Titolo ➞ Capitolo ➞ A - ➞ No
Z
D
Su alcuni dischi, le voci di impostazione del menu
potrebbero variare e questo menu potrebbe non
essere disponibile.
Titolo
➞
Cartella
➞
Tutto
➞
No
ꢁ0
Italiano
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 30
2011-03-05 �� 11:34:02
Ripetizione CD/MP3
Visualizzazione delle informazioni sul disco
1. Durante la riproduzione CD/ MP3, premere il
tasto REPEAT ripetutamente per selezionare il
modo di ripetizione desiderato.
d
;
;
;
;
1/1
2/20
B
A
(Ripeti disattivato ; Ripeti disco ; Ripeti tutto ;
0:05:21
1/1 EN AC3 5.1
1/1 EN
1/1
Casuale ; Ripeti sezione A-B)
;
;
;
;
Cambia
Seleziona
(
Ripeti disattivato ; Ripeti traccia;
Directory di ripetizione (Directory) ; Ripeti tutto
; Casuale)
Ripetizione della riproduzione A-B
D
dB
1/6
1/1
È possibile riprodurre ripetutamente una determinata
sezione di un DVD o di un CD.
1/1 EN
Cambia
Seleziona
1. Durante la riproduzione di un disco DVD o CD,
premere il tasto REPEAT sul telecomando.
2. Per i DVD, premere i tasti ▲▼ per selezionare
A-.
Per i CD premere ripetutamente il tasto
REPEAT finché non appare
.
TOOLS
1. Durante la riproduzione, premere il
3. Premere il tasto INVIO nel punto in cui si
desidera che inizi la ripetizione della riproduzione
(A).
tasto TOOLS sul telecomando.
2. Premere i tasti ▲▼ per selezionare la
voce desiderata.
4. Premere il tasto INVIO nel punto in cui si
desidera interrompere la ripetizione della
riproduzione (B).
3. Premere i tasti ◄► per apportare le modifiche
desiderate alle impostazioni, quindi premere il
tasto INVIO.
5. Per tornare al modo di riproduzione normale,
Per i DVD, premere i tasti ▲▼ per selezionare
OFF. Per i CD, premere il tasto REPEAT per
- È possibile utilizzare i tasti numerici sul
telecomando per controllare alcune voci.
4. Per far scomparire le informazioni sul disco,
selezionare
.
premere di nuovo il tasto TOOLS.
✎
`
NOTA
✎
NOTA
`
Se si stanno riproducendo contenuti dal menu degli
strumenti, su alcuni dischi è possibile che alcune
funzioni non siano abilitate.
La funzione di ripetizione A-B non funziona con
i dischi DivX, MP3 o JPEG.
`
`
È anche possibile selezionare DTS, Dolby Digital o Pro
Logic, a seconda del disco.
Alcuni menu degli strumenti potrebbero differire a
seconda dei dischi e dei file.
Italiano
ꢁ1
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 31
2011-03-05 �� 11:34:05
Funzioni di base
3. Premere i tasti _+ per selezionare la lingua
Menu TOOLS
desiderata per i sottotitoli.
`
Titolo(
) : Per accedere al titolo
~
A seconda delle lingue presenti su un disco
DVD, viene selezionata una lingua per i
sottotitoli diversa ogni volta che si preme il
tasto.
desiderato quando sul disco è presente più
di un titolo. Se ad esempio un DVD contiene
più di un filmato, ognuno di essi viene
identificato come Titolo.
`
`
Capitolo(
) : La maggior parte dei dischi
✎
NOTA
DVD è registrata in capitoli in modo che
si possa trovare rapidamente un capitolo
specifico.
`
Su alcuni dischi le funzioni di lingua dei sottotitoli e
dell'audio potrebbero non essere disponibili.
Tempo di riproduzione(
) : Consente
Funzione Didascalie
di riprodurre un filmato a partire dall'ora
desiderata. È necessario inserire l'ora di
inizio come riferimento.
D
~
~
È necessario avere un po' di esperienza di
La funzione di ricerca dell'ora non funziona
su alcuni dischi.
estrazione e editing di video per usare questa
funzione correttamente.
`
`
Audio(
): Indica la lingua del film. Un
disco DVD può contenere fino a 8 lingue per
Per utilizzare la funzione Didascalie, salvare il file
con le didascalie (*.smi) con lo stesso nome del file
DivX (*.avi) e nella stessa cartella.
l'audio.
Sottotitolo(
): Indica le lingue dei
sottotitoli disponibili nel disco. È possibile
scegliere la lingua dei sottotitoli oppure
disattivarli. Un disco DVD può contenere fino
a 32 lingue dei sottotitoli.
Esempio. Radice Samsung_007CD1.avi
Samsung_007CD1.smi
~
~
Per il nome del file è possibile utilizzare fino a 100
caratteri alfanumerici o 50 caratteri dell'Asia
orientale (caratteri a 2 byte come il coreano e il
cinese).
I sottotitoli dei file DivX *.smi, *.sub, *.srt oltre 148
kbyte non sono supportati.
`
Angolo(
): È possibile utilizzare questa
funzione quando un DVD contiene più
angolazioni per una determinata scena.
Selezione della lingua dell'audio
Funzione Angolo
dD
1. Premere il tasto TOOLS.
d
2. Premere i tasti ▲▼ per selezionare AUDIO (
).
3. Premere i tasti _+ per selezionare la lingua
Questa funzione consente di visualizzare la stessa
scena da angolazioni diverse.
audio desiderata.
~
A seconda delle lingue presenti su un DVD,
viene selezionata una lingua audio diversa ogni
volta che si preme il tasto.
1. Premere il tasto TOOLS.
2. Premere i tasti ▲▼ per selezionare ANGOLO
(
).
3. Premere i tasti _+ per selezionare l'angolo
desiderato.
Selezione della lingua dei sottotitoli
✎
`
NOTA
La funzione Angolo funziona soltanto con i dischi
su cui sono state registrate più angolazioni.
dD
1. Premere il tasto TOOLS.
2. Premere i tasti ▲▼ per selezionare
SOTTOTITOLI (
).
ꢁꢀ
Italiano
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 32
2011-03-05 �� 11:34:05
SLEEP
GIGA
È possibile impostare l'ora in cui il sistema home
cinema si spegnerà da solo.
La funzione GIGA Sound amplifica i bassi e raddoppia la loro
potenza consentendo di apprezzare un suono effettivamente
più potente.
Premere il tasto SLEEP.
La funzione GIGA Sound viene applicata solo al subwoofer.
~
Ogni volta che si preme questo tasto,
la selezione cambia nella sequenza
indicata di seguito:
Preme il tasto GIGA.
SLP 10
SLP 90
SLP 20
SLP 30
SLP 60
OFF.
✎
NOTA
SLP 120
SLP 150
`
Se GIGA Sound è impostato su "ON", gli altri effetti
campo audio non saranno applicati.
DIMMER
È possibile regolare la luminosità dello
schermo sull'unità principale.
`
`
Se DOLBY PLII è impostato su "ON", non viene
applicato l'effetto audio GIGA.
Il suono GIGA si ottiene solo in modo LPCM a 2
canali.
Premere il tasto DIMMER.
Modo audio
S.VOL (SMART VOLUME,
VOLUME INTELLIGENTE)
P.BASS
Questa funzione regola e stabilizza il livello del
volume in modo che non possa cambiare
improvvisamente in caso di cambio di canale o di
La funzione P.BASS amplifica i bassi per potenziare le
frequenze basse.
La funzione MP3 ENHANCE fornisce una qualità
acustica migliore effettuando l'upscaling della frequenza
di campionatura.
passaggio di scena.
S . VOL
Premere il tasto S.VOL.
Premere il tasto P.BASS.
~
Ogni volta che si preme questo tasto,
la selezione cambia nella sequenza
indicata di seguito:
BASSI ATTIVATI
➞
Sorgente LPCM
a 2 canali
BASSI DISATTIVATI
VOLUME SMART ATT VOLUME SMART
DISAT
INTENSIF MP3 ATT ➞
File MP3
BASSI ATTIVATI
➞
BASSI DISATTIVATI
S/W LEVEL
✎
NOTA
È anche possibile premere il tasto S/W LEVEL sul
comando e per utilizzare i tasti _ o + per regolare il
livello del subwoofer.
`
La funzione P.BASS è disponibile solo con le sorgenti
LPCM a 2 canali come MP3, DivX, CD e WMA.
`
La funzione P.BASS (P.BASS) non funziona con i modi
GIGA SOUND (GIGA SOUND) o Dolby Pro Logic ll
Premere il tasto S/W LEVEL.
(Dolby Pro Logic ll).
Se si preme P.BASS nel modo DSP/EQ, il modo DSP/
EQ si disattiva automaticamente e subentra la funzione
P.BASS.
`
La funzione di intensificazione MP3 è disponibile solo
per i file MP3.
Italiano
ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 33
2011-03-05 �� 11:34:06
Funzioni di base
DSP (Digital Signal Processor)/EQ
Modo Dolby Pro Logic II
È possibile selezionare il modo audio Dolby Pro
Logic II desiderato.
~
~
DSP (Digital Signal Processor): I modi DSP sono stati
progettati per simulare diversi ambienti acustici.
EQ: È possibile selezionare POPS, JAZZ, ROCK o
USER per ottimizzare l'audio in base al genere di
musica che si sta ascoltando.
Premere il tasto
PL II.
DSP /EQ
Premere il tasto DSP/EQ.
Durante l'ascolto di musica, è possibile
sentire gli effetti sonori come se si
stesse assistendo a un'esibizione dal
vivo.
MUSIC
MOVIE
POPS,
JAZZ,
ROCK
A seconda del genere musicale, si può
scegliere tra POPS, JAZZ e ROCK.
Conferisce maggiore realismo all'audio
del film.
È possibile ascoltare musica con le
impostazioni di "EQ:UTENTE".
È possibile ascoltare una sorgente
audio a 2 canali con audio surround a
5.1 canali con tutti i diffusori attivati.
- Uno o più diffusori potrebbero non
emettere l'audio a seconda del
segnale d'ingresso.
Premendo INVIO nel menu "EQ:
USER
UTENTE", viene visualizzata una finestra
dove è possibile cambiare le impostazioni
EQ secondo le proprie preferenze.
PROLOG
Riproduce la sensazione di trovarsi in uno
studio.
STUDIO
CLUB
Permette di ascoltare un audio surround
multicanale.
MATRIX
STEREO
Simula il suono di una discoteca con
bassi martellanti.
Selezionare questa opzione per
ascoltare l'audio soltanto dai diffusori
anteriori destro e sinistro e dal
subwoofer.
Riproduce l'effetto di trovarsi in una sala
concerti.
HALL
MOVIE
Crea la sensazione di trovarsi al cinema.
✎
NOTA
Dà la sensazione di trovarsi in una
grande chiesa.
CHURCH
`
Per la selezione del modo Pro Logic II,
collegare il dispositivo esterno ai connettori
AUDIO IN (L e R) sul prodotto. Se si collega un
solo ingresso (L o R), non è possibile ascoltare
l'audio surround.
Selezionare questa opzione per un
ascolto normale.
OFF
`
`
La funzione Pro Logic II è disponibile solo nel
modo Stereo.
La funzione Pro Logic II non è disponibile
durante la riproduzione di un segnale AC3 in
modo 2.1 canali.
✎
NOTA
`
La funzione DSP/EQ è disponibile solo in modo
Stereo.
La funzione DSP/EQ non è disponibile durante
la riproduzione di un segnale AC3 in modo 2.1
canali.
`
ꢁꢂ
Italiano
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 34
2011-03-05 �� 11:34:06
5. Premere di nuovo il tasto TUNER MEMORY.
Radio
~
Premere il tasto TUNER MEMORY prima che il numero
scompaia dal display.
Il numero scompare dal display e la stazione viene
memorizzata in memoria.
Utilizzo dei tasti del telecomando
~
1. Premere il tasto FUNCTION per selezionare FM.
2. Selezionare la stazione desiderata.
6. Per memorizzare un'altra stazione, ripetere i passi da 2 a 5.
~
Sintonizzazione preimpostata 1 : È necessario
innanzitutto aggiungere una frequenza
preimpostata desiderata. Premere il tasto di
ARRESTO (@) per selezionare PREDEFINITO e
quindi premere il tasto TUNING/CHꢀ(
selezionare la stazione preimpostata.
) per
~
~
Sintonizzazione manuale : Premere il tasto di
ARRESTO (@) per selezionare MANUALE e quindi
premere il tasto TUNING/CHꢀ(
) per sintonizzare
a una frequenza inferiore o superiore.
Sintonizzazione automatica : Premere il tasto di
ARRESTO (@) per selezionare MANUALE e
quindi tenere premuto il tasto TUNING/CHꢀ(
)
per cercare automaticamente la banda.
Impostazione mono/stereo
Premere il tasto MO/ST.
~
Ogni volta che si preme il tasto, l'audio
passa da STEREO a MONO e
viceversa.
~
Nelle zone con scarsa ricezione, selezionare
MONO per una trasmissione chiara e priva di
interferenze.
Memorizzazione delle stazioni
Esempio: Memorizzazione di FM 89.10
1. Premere il tasto FUNCTION per selezionare FM.
2. Premere il tasto TUNING/CH (
<89.10>.
) per selezionare
3. Premere il tasto TUNER MEMORY.
~
Il numero lampeggia sul display.
4. Premere i tasti TUNING/CH (
) per
selezionare il numero in cui memorizzare la
stazione.
~
È possibile scegliere un numero compreso tra 1 e 15.
Italiano
ꢁꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 35
2011-03-05 �� 11:34:08
Funzioni avanzate
Funzione USB
Registrazione USB
Durante la riproduzione di CD-DA (Compact Disc Digital
Audio) con la funzione di registrazione USB oppure
durante l'ascolto della radio FM o la ricezione di una
sorgente audio da un dispositivo esterno, è possibile
registrare la sorgente audio nella memoria USB.
Riproduzione di file multimediali
utilizzando la funzione Host USB
Collegando il dispositivo di memorizzazione alla porta
USB del prodotto, è possibile riprodurre file
multimediali come immagini, video e brani musicali
salvati su un lettore MP3, su una Memory Stick USB
o in una foto/videocamera digitale con qualità video
elevata e sistema audio a 5.1 canali.
Es.) registrazione USB di contenuti audio CD-DA
1. Collegare il dispositivo USB al prodotto.
2. Inserire il disco CD-DA nel vano CD.
3. Premere il tasto USB REC sul telecomando.
~
Per avviare il rippaggio della traccia corrente,
premere il tasto USB REC sul telecomando
mentre il sistema sta riproducendo una
traccia o è momentaneamente in pausa.
Per registrare l'intero CD, tenere premuto il tasto USB
REC sul telecomando.
~
- Sul display viene visualizzato FULL CD RIPPING
(RIPPAGGIO CD COMPLETO) e viene avviata la
registrazione.
4. Premere il tasto di ARRESTO (@) per arrestare la
registrazione.
~
Quando la registrazione USB del CD è completa, viene
creata una nuova cartella nell'unità USB chiamata
"RECORDING" (REGISTRAZIONE). I contenuti vengono
salvati nella cartella in formato MP3.
1. Collegare il dispositivo USB alla porta USB sul
pannello anteriore del prodotto.
2. Premere il tasto FUNCTION per selezionare
~
Quando la registrazione USB della radio FM o della
sorgente AUX è completa, viene creata una nuova cartella
nell'unità USB chiamata "TUNER RECORDING
(REGISTRAZIONE TUNER) o AUX RECORDING
(REGISTRAZIONE AUX)". I contenuti vengono salvati nella
cartella in formato MP3.
USB.
~
USB appare sulla schermata di
visualizzazione e poi scompare.
3. Premere i tasti _+ per selezionare i Video, le
Foto e le Musica desiderati.
- Selezionare un file da riprodurre.
✎
NOTA
`
Non scollegare la connessione USB o il cavo di
alimentazione durante la registrazione USB, altrimenti
si possono danneggiare i dati.
Rimozione sicura del dispositivo USB
Prima di scollegare il cavo USB eseguire la rimozione
sicura del dispositivo USB, per evitare di
danneggiare la memoria integrata al suo interno.
Per interrompere la registrazione USB, premere il tasto
di ARRESTO e scollegare il dispositivo USB dopo che
il sistema ha terminato la riproduzione del CD.
Se si scollega il collegamento USB durante la
registrazione USB, il sistema si spegne e non sarà
possibile eliminare il file registrato.
`
`
~
Premere il tasto GIALLO (C).
- Sul display appare REMOVE.
~
Rimuovere il cavo USB.
Se si collega il dispositivo USB al sistema durante la
riproduzione di un CD, il sistema si arresta
temporaneamente e la riproduzione viene riavviata.
Non è possibile registrare dischi DTS-CD.
Se la durata di registrazione è inferiore a 5 secondi,
non è possibile creare un file registrato.
✎
`
NOTA
Per ascoltare i file musicali con l'audio a 5.1
canali, è necessario impostare il modo Dolby
Pro Logic II su Matrix (Matrice). (Vedere a
pagina 34)
`
`
`
La registrazione USB funziona soltanto se il dispositivo
USB è formattato nel file system FAT. (il file system
NTFS non è supportato).
`
Rimuovere lentamente il cavo USB dalla porta
USB. In caso contrario, potrebbe provocare
danni alla porta USB.
`
`
Durante la registrazione USB del CD non viene
emesso il segnale audio.
Quando Audio HDMI è impostato su On, la funzione di
registrazione USB non è supportata.
ꢁꢄ
Italiano
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 36
2011-03-05 �� 11:34:09
Altre informazioni
Risoluzione dei problemi
Se il prodotto non funziona correttamente, consultare la tabella che segue. Se il problema non è elencato nella
tabella o se le istruzioni fornite non portano a una soluzione, spegnere il prodotto, scollegare il cavo di
alimentazione e contattare il rivenditore autorizzato più vicino o il Centro di assistenza di Samsung Electronics.
Sintomo
Controlli/rimedi
Non si riesce ad estrarre il disco.
• Il cavo di alimentazione è ben collegato alla presa?
• Spegnere l'unità, quindi riaccenderla.
La riproduzione non si avvia.
• Controllare il codice regionale del DVD.
È possibile che i DVD acquistati all'estero non siano riproducibili.
• I CD-ROM e i DVD-ROM non possono essere riprodotti con questo prodotto.
• Assicurarsi che il livello di blocco sia corretto.
La riproduzione non si avvia
immediatamente quando viene
premuto il tasto di riproduzione/pausa.
• Il disco è deformato o ha la superficie graffiata?
• Pulire il disco.
L'audio non viene riprodotto.
• Non si sente l'audio durante la riproduzione veloce, la riproduzione rallentata e la
riproduzione fotogramma per fotogramma.
• I diffusori sono collegati correttamente? La configurazione dei diffusori è
personalizzata correttamente?
• Il disco è gravemente danneggiato?
L'audio viene emesso soltanto da
alcuni dei diffusori, non da tutti e 6.
• Per alcuni dischi DVD, il suono viene emesso soltanto dai diffusori anteriori.
• Controllare se i diffusori sono collegati correttamente.
• Regolare il volume.
• Durante l'ascolto di un CD, della radio o della TV, l'audio viene emesso soltanto dai
diffusori anteriori.
Selezionare "PROLOG" premendo
usare tutti e sei i diffusori.
PL II (Dolby Pro Logic II) sul telecomando per
Non viene prodotto l'audio Dolby
Digital 5.1 CH Surround.
• Il disco reca il marchio "Dolby Digital 5.1 CH"? Il suono Dolby Digital 5.1 CH
Surround viene prodotto soltanto se il disco è registrato con un audio a 5.1 canali.
• La lingua audio è impostata correttamente su Dolby Digital 5.1-CH?
Il telecomando non funziona.
• Il telecomando viene utilizzato con un'angolazione e una distanza comprese nella sua portata?
• Le batterie sono scariche?
• Il modo (RECEIVER DVD/TV) è stato selezionato correttamente?
• Il disco gira, ma non viene
riprodotta nessuna immagine.
• Il televisore è acceso?
• I cavi video sono collegati correttamente?
• Il disco è sporco o danneggiato?
• La qualità dell'immagine è scarsa
e l'immagine trema.
• I dischi di scarsa qualità potrebbero non essere riproducibili.
La lingua dell'audio e i sottotitoli non
funzionano.
• La lingua dell'audio e i sottotitoli non funzionano se il disco non li contiene.
Il menu del disco/titolo non appare
neanche quando viene selezionata la
funzione disco/titolo.
• Si sta usando un disco che non contiene menu?
Il formato non può essere cambiato. • È possibile riprodurre i DVD 16:9 in modo 16:9 WIDE, 4:3 LETTER BOX o 4:3 PAN
SCAN, ma i DVD 4:3 possono essere visti soltanto in formato 4:3. Selezionare la
funzione appropriata in base alla copertina del disco DVD.
Italiano
ꢁꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 37
2011-03-05 �� 11:34:09
Altre informazioni
Sintomo
Controlli/rimedi
• Il prodotto non funziona.
• Tenere premuto il tasto di ARRESTO (@) sul telecomando per almeno 5 secondi
senza nessun disco inserito (funzione di reset).
Utilizzando la funzione RESET vengono cancellate tutte le impostazioni
memorizzate.
Utilizzarla solo in caso di necessità.
(esempio: L'apparecchio si spegne, il
tasto del pannello anteriore non
funziona o si sentono strani rumori).
• Il prodotto non funziona normalmente.
Non si ricorda la password del
livello di protezione bambini.
• Mentre sul display del prodotto è visualizzato il messaggio "NO DISC (NESSUN
DISCO)", tenere premuto il tasto di ARRESTO (@) del telecomando per almeno 5
secondi. Sul display viene visualizzato "INIT(INIZ.)" e tutte le impostazioni ritornano ai
valori predefiniti.
Quindi premere il tasto di ACCENSIONE.
Utilizzando la funzione RESET vengono cancellate tutte le impostazioni
memorizzate.
Utilizzarla solo in caso di necessità.
La radio non funziona.
• L'antenna è collegata correttamente?
• Se il segnale d'ingresso dell'antenna è debole, installare un'antenna FM esterna in un'area
con una buona ricezione.
Elenco codici lingue
Inserire il codice appropriato per OTHERS (ALTRO) di Disc Menu (Menu Disco), Audio (Audio) e Subtitle
(Sottotitolo). (Vedere a pagina 27).
Codice
Lingua
Codice
Lingua
Codice
Lingua
Codice
Lingua
Codice
Lingua
Codice
Lingua
1027
1028
1032
1039
1044
1045
1051
Afar
1142
1144
1145
1149
1150
1151
1157
Greek
English
1239
1245
1248
1253
1254
1257
1261
Interlingue
Inupiak
1345
1347
1349
1350
1352
1353
1356
Malagasy
Maori
1482
1483
1489
1491
1495
1498
1501
Kirundi
Romanian
Russian
1527
1528
1529
1531
1532
1534
1535
Tajik
Thai
Abkhazian
Afrikaans
Amharic
Arabic
Esperanto
Spanish
Estonian
Basque
Persian
Indonesian
Icelandic
Italian
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Kinyarwanda
Sanskrit
Assamese
Aymara
Hebrew
Japanese
Sindhi
Sangro
1052
Azerbaijani
1165
Finnish
1269
Yiddish
1357
Malay
1502
Serbo-Croatian
1538
Turkish
1053
1057
1059
1060
1069
Bashkir
Byelorussian
Bulgarian
Bihari
1166
1171
1174
1181
1183
Fiji
1283
1287
1297
1298
1299
Javanese
Georgian
1358
1363
1365
1369
1376
Maltese
Burmese
Nauru
1503
1505
1506
1507
1508
Singhalese
Slovak
1539
1540
1543
1557
1564
Tsonga
Tatar
Faeroese
French
Frisian
Irish
Kazakh
Slovenian
Samoan
Shona
Twi
Greenlandic
Cambodian
Nepali
Ukrainian
Urdu
Bislama
Dutch
Bengali;
Bangla
1066
1186
Scots Gaelic
1300
Canada
1379
Norwegian
1509
Somali
1572
Uzbek
1067
1070
1079
1093
1097
Tibetan
Breton
1194
1196
1203
1209
1217
Galician
Guarani
Gujarati
Hausa
Hindi
1301
1305
1307
1311
1313
Korean
Kashmiri
Kurdish
Kirghiz
Latin
1393
1403
1408
1417
1428
Occitan
(Afan) Oromo
Oriya
1511
1512
1513
1514
1515
Albanian
Serbian
1581
1587
1613
1632
1665
Vietnamese
Volapuk
Wolof
Catalan
Corsican
Czech
Siswati
Punjabi
Sesotho
Sundanese
Xhosa
Polish
Yoruba
1103
Welsh
1226
Croatian
1326
Lingala
1435
Pashto, Pushto
1516
Swedish
1684
1697
Chinese
Zulu
1105
1109
Danish
1229
1233
Hungarian
Armenian
1327
1332
Laothian
1436
1463
Portuguese
Quechua
1517
1521
Swahili
Tamil
German
Lithuanian
Latvian,
Lettish
Rhaeto-
1130
Bhutani
1235
Interlingua
1334
1481
1525
Tegulu
Romance
ꢁꢆ
Italiano
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 38
2011-03-05 �� 11:34:09
Specifiche
2,76 kg
Peso
430 (W) x 59 (H) x 249 (D) mm
+5°C~+35°C
Dimensioni
Generale
Temperatura di esercizio
Umidità di esercizio
Rapporto segnale/rumore
Sensibilità utile
10% fino al 75%
70 dB
10 dB
Sintonizzatore FM
0.5 %
Distorsione armonica totale
Velocità di lettura: 3,49 ~ 4,06 m/sec.
Tempo approssimativo di riproduzione (Single Sided, Single Layer): 135 min.
Velocità di lettura: 4,8 ~ 5,6 m/sec.
Tempo massimo di riproduzione: 74 min.
Velocità di lettura: 4,8 ~ 5,6 m/sec.
Tempo massimo di riproduzione: 20 min.
480i(576i)
DVD (Digital Versatile Disc)
CD: 12 cm (COMPACT DISC)
CD: 8 cm (COMPACT DISC)
Video composito
Dischi
1 canale: 1.0 Vp-p (carico 75 Ω)
480i(576i)
Uscita video
Video/Audio
Y: 1.0 Vp-p (carico 75 Ω)
PR: 0.70 Vp-p (carico 75 Ω)
PB: 0.70 Vp-p (carico 75 Ω)
1080p, 1080i, 720p, 480p(576p)
Video Component
HDMI
142W x 2(3
142W(3
141W x 2(3
167W(3
Ω
)
Uscita diffusore anteriore
Uscita diffusore centrale
Uscita diffusore surround
Uscita Subwoofer
Gamma di frequenze
Rapporto S/N
Ω
)
Ω)
Ω)
Amplificatore
20Hz~20KHz
65dB
60dB
Separazione canali
Sensibilità di ingresso
(AUX)800 mV
*: Specifica nominale
- Samsung Electronics Co., Ltd si riserva il diritto di modificare le specifiche senza preavviso.
- Peso e dimensioni sono approssimativi.
- Design e specifiche sono soggetti a modifiche senza preavviso.
- Per l’alimentazione elettrica e il consumo di corrente, consultare l’etichetta apposta al prodotto.
Italiano
ꢁꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 39
2011-03-05 �� 11:34:09
Altre informazioni
HT-D450
Sistema di diffusori 5.1 canali
Sistema di diffusori
Anteriori
3 Ω
Surround
3 Ω
Centrale
3 Ω
Subwoofer
3 Ω
Impedenza
Gamma di frequenze
140Hz~20KHz 140Hz~20KHz 140Hz~20KHz 40Hz~160Hz
Livello di pressione sonora di uscita
86dB/W/M
142W
284W
86dB/W/M
141W
282W
86dB/W/M
142W
284W
88dB/W/M
142W
284W
Ingresso nominale
Ingresso massimo
Diffusori
Anteriori : 90 x 141,5 x 68,5 mm
Surround : 84 x 104,5 x 68,5 mm
Centrale : 360 x 74,5 x 68,5 mm
Subwoofer : 168 x 350 x 285 mm
Dimensioni (L x A x P)
Pesi
Anteriori: 0,58 Kg, Centrale : 0,96 Kg
Surround : 0,4 Kg, Subwoofer : 3,6 Kg
HT-D453
Sistema di diffusori 5.1 canali
Sistema di diffusori
Anteriori
3 Ω
Surround
3 Ω
Centrale
3 Ω
Subwoofer
3 Ω
Impedenza
Gamma di frequenze
Livello di pressione sonora di uscita
Ingresso nominale
140Hz~20KHz 140Hz~20KHz 140Hz~20KHz 40Hz~160Hz
86dB/W/M
142W
86dB/W/M
141W
86dB/W/M
142W
88dB/W/M
142W
Diffusori
Ingresso massimo
284W
282W
284W
284W
Anteriori : 90 x 1200 x 119 mm (base supporto : 250 x 250)
Surround : 84 x 104,5 x 68,5 mm
Dimensioni (L x A x P)
Pesi
Centre : 360 x 74,5 x 68,5 mm
Subwoofer : 168 x 350 x 285 mm
Anteriori : 3,68 Kg, Centrale : 0,96 Kg
Surround : 0,4 Kg, Subwoofer : 3,6 Kg
HT-D455
Sistema di diffusori 5.1 canali
Sistema di diffusori
Anteriori
3 Ω
Surround
3 Ω
Centrale
3 Ω
Subwoofer
3 Ω
Impedenza
140Hz~20KHz 140Hz~20KHz 140Hz~20KHz 40Hz~160Hz
Gamma di frequenze
Livello di pressione sonora di uscita
Ingresso nominale
86dB/W/M
142W
86dB/W/M
141W
86dB/W/M
142W
88dB/W/M
142W
Diffusori
Ingresso massimo
284W
282W
284W
284W
Anteriori/Surround : 90 x 1200 x 119 mm (base supporto : 250 x 250)
Dimensioni (L x A x P)
Pesi
Centrale 360 x 74,5 x 68,5 mm
:
Subwoofer : 168 x 350 x 285 mm
Anteriori/Surround : 3,68 Kg, Centrale : 0,96 Kg
Subwoofer : 3,6 Kg
ꢂ0
Italiano
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 40
2011-03-05 �� 11:34:09
Contatta SAMSUNG WORLD WIDE
Se avete commenti o domande sui prodotti Samsung, contattate il Servizio Clienti Samsung.
Area
` North America
Canada
Mexico
U.S.A
` Latin America
Argentine
Brazil
Contact Center
Web Site
Area
Serbia
Contact Center
0700 Samsung (0700 726
7864)
0800-SAMSUNG (726-7864)
902-1-SAMSUNG (902 172 678) www.samsung.com
0771 726 7864 (SAMSUNG)
Web Site
www.samsung.com
1-800-SAMSUNG (726-7864)
01-800-SAMSUNG (726-7864) www.samsung.com
1-800-SAMSUNG (726-7864)
www.samsung.com
Slovakia
Spain
Sweden
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/ch
www.samsung.com/
ch_fr/(French)
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
0800-333-3733
0800-124-421 / 4004-0000
800-SAMSUNG (726-7864)
01-8000112112
0-800-507-7267
1-800-751-2676
1-800-10-7267
800-6225
1-800-299-0013
800-7919267
1-800-234-7267
00-1800-5077267
800-7267
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
0848-SAMSUNG (7267864,
CHF 0.08/min)
Switzerland
Chile
U.K
Eire
Lithuania
Latvia
Estonia
0330 SAMSUNG (7267864)
0818 717100
8-800-77777
8000-7267
800-7267
Colombia
Costa Rica
Dominica
Ecuador
El Salvador
Guatemala
Honduras
Jamaica
` CIS
Russia
Georgia
Armenia
Azerbaijan
8-800-555-55-55
8-800-555-555
0-800-05-555
088-55-55-555
8-10-800-500-55-500
(GSM: 7799)
8-10-800-500-55-500
00-800-500-55-500
8-10-800-500-55-500
www.samsung.com
-
-
-
Nicaragua
Panama
Kazakhstan
www.samsung.com
Peru
0-800-777-08
1-800-682-3180
Puerto Rico
Trinidad &
Tobago
Venezuela
` Europe
Albania
Uzbekistan
Kyrgyzstan
Tadjikistan
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.ua
www.samsung.com/
ua_ru
1-800-SAMSUNG (726-7864)
0-800-100-5303
www.samsung.com
www.samsung.com
Ukraine
0-800-502-000
42 27 5755
0810 - SAMSUNG (7267864,
€ 0.07/min)
-
Belarus
Moldova
` Asia Pacific
Australia
New Zealand
China
810-800-500-55-500
00-800-500-55-500
-
-
Austria
www.samsung.com
www.samsung.com/
be (Dutch)
Belgium
02-201-24-18
1300 362 603
www.samsung.com
www.samsung.com/
0800 SAMSUNG (0800 726 786) www.samsung.com
400-810-5858 / 010-6475 1880 www.samsung.com
www.samsung.com/hk
be_fr (French)
Bosnia
Bulgaria
Croatia
05 133 1999
07001 33 11
-
www.samsung.com
Hong Kong
(852) 3698 4698
www.samsung.com/
hk_en/
062 SAMSUNG (062 726 7864) www.samsung.com
800-SAMSUNG (800-726786)
3030 8282 / 1800 110011 /
1800 3000 8282 / 1800 266 8282
0800-112-8888 /
021-5699-7777
0120-327-527
1800-88-9999
1-800-10-SAMSUNG(726-7864) /
1-800-3-SAMSUNG(726-7864) /
1-800-8-SAMSUNG(726-7864) /
02-5805777
1800-SAMSUNG (726-7864)
1800-29-3232 / 02-689-3232 www.samsung.com
0800-329-999
1 800 588 889
India
www.samsung.com
www.samsung.com
Samsung Zrt., česká organizační
Czech
www.samsung.com
složka, Oasis Florenc, Soko-
lovská394/17, 180 00, Praha 8
Indonesia
Denmark
Finland
France
70 70 19 70
030 - 6227 515
01 48 63 00 00
01805 - SAMSUNG (726-7864
€ 0,14/Min)
06-80-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
+381 0113216899
261 03 710
023 207 777
020 405 888
0900-SAMSUNG
(0900-7267864) (€ 0,10/Min)
815-56 480
0 801 1SAMSUNG (172678)
/ 022-607-93-33
80820-SAMSUNG (726-7864)
www.samsung.com
www.samsung.com
www.samsung.com
Japan
Malaysia
www.samsung.com
www.samsung.com
Germany
www.samsung.com
Philippines
www.samsung.com
www.samsung.com
Hungary
Italia
Kosovo
Luxemburg
Macedonia
Montenegro
www.samsung.com
www.samsung.com
Singapore
Thailand
Taiwan
Vietnam
` Middle East
Bahrain
Egypt
Jordan
Morocco
Oman
Saudi Arabia
Turkey
-
www.samsung.com
www.samsung.com
www.samsung.com
-
-
8000-4726
08000-726786
800-22273
080 100 2255
800-SAMSUNG (726-7864)
9200-21230
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
Netherlands
Norway
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
Poland
Portugal
1. 08010 SAMSUNG (72678) -
doar din reţeaua Romtelecom,
tarif local
2. 021.206.01.10 - din orice
reţea, tarif normal
444 77 11
800-SAMSUNG (726-7864)
U.A.E
` Africa
Nigeria
Rumania
www.samsung.com
0800-SAMSUNG (726-7864)
0860-SAMSUNG (726-7864 )
www.samsung.com
www.samsung.com
South Africa
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 41
2011-03-05 �� 11:34:10
Corretto smaltimento delle batterie del prodotto
(Applicabile nei paesi dell’Unione Europea e in altri paesi europei con sistemi di conferimento differenziato delle
batterie.)
Il marchio riportato sulla batteria o sulla sua documentazione o confezione indica che le batterie di questo
prodotto non devono essere smaltite con altri rifiuti domestici al termine del ciclo di vita. Dove raffigurati,
i simboli chimici Hg, Cd o Pb indicano che la batteria contiene mercurio, cadmio o piombo in quantità
superiori ai livelli di riferimento della direttiva UE 2006/66. Se le batterie non vengono smaltite correttamente,
queste sostanze possono causare danni alla salute umana o all'ambiente.
Per proteggere le risorse naturali e favorire il riutilizzo dei materiali, separare le batterie dagli altri tipi di rifiuti e
riciclarle utilizzando il sistema di conferimento gratuito previsto nella propria area di residenza.
Corretto smaltimento del prodotto (rifiuti elettrici ed elettronici)
(Applicabile nell’Unione Europea e in altri paesi europei con sistema di raccolta differenziata)
Il marchio riportato sul prodotto, sugli accessori o sulla documentazione indica che il prodotto e i
relativi accessori elettronici (quali caricabatterie, cuffia e cavo USB) non devono essere smaltiti con altri
rifiuti domestici al termine del ciclo di vita. Per evitare eventuali danni all'ambiente o alla salute causati
dall'inopportuno smaltimento dei rifiuti, si invita l'utente a separare il prodotto e i suddetti accessori da altri
tipi di rifiuti e di riciclarli in maniera responsabile per favorire il riutilizzo sostenibile delle risorse materiali.
Gli utenti domestici sono invitati a contattare il rivenditore presso il quale è stato acquistato il prodotto o
l'ufficio locale preposto per tutte le informazioni relative alla raccolta differenziata e al riciclaggio per questo
tipo di materiali.
Gli utenti aziendali sono invitati a contattare il proprio fornitore e verificare i termini e le condizioni del
contratto di acquisto. Questo prodotto e i relativi accessori elettronici non devono essere smaltiti unitamente
ad altri rifiuti commerciali.
Code no. AH68-02337F (00)
Download from Www.Somanuals.com. All Manuals Search And Download.
HT-D450-ZF-IT-0304.indd 42
2011-03-05 �� 11:34:10
|