Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
AUSTRIA
BELGIUM
Web Site
Customer Care Centre
0800-SAMSUNG (726-7864)
0032 (0)2 201 24 18
844 000 844
CZECH REPUBLIC
Distributor pro Českou republiku:
Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4
DENMARK
EIRE
70 70 19 70
www.samsung.com/fi
0818 717 100
030-6227 515
FINLAND
3260 SAMSUNG (€ 0,15/Min)
08 25 08 65 65 (€ 0,15/Min)
FRANCE
GERMANY
HUNGARY
ITALIA
01805 - SAMSUNG (726-7864) (€ 0,14/Min)
06-80-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
0035 (0)2 261 03 710
LCD TV
LUXEMBURG
NETHERLANDS
NORWAY
0900-SAMSUNG (726-7864) (€ 0,10/Min)
815-56 480
user manual
0 801 801 881
022-607-93-33
POLAND
PORTUGAL
SLOVAKIA
SPAIN
80820-SAMSUNG (726-7864)
0800-SAMSUNG (726-7864)
902 10 11 30
-
SWEDEN
SWITZERLAND
U.K
0771-400 200
0800-SAMSUNG (726-7864)
0845 SAMSUNG (7267864)
444 77 11
TURKEY
ESTONIA
LATVIA
800-7267
800-7267
LITHUANIA
KAZAHSTAN
KYRGYZSTAN
RUSSIA
8-800-77777
8-10-800-500-55-500
00-800-500-55-500
8-800-555-55-55
-
TADJIKISTAN
UKRAINE
UZBEKISTAN
8-10-800-500-55-500
8-800-502-0000
8-10-800-500-55-500
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
Model
Serial No.
BN68-01517E-00
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre.(See back cover for more information)
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
•
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen
image retention.
This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when
displaying a still image.
•
•
Watching the LCD TV in 4:3 format for a long period of time may leave traces of
borders displayed on the left, right and center of the screen caused by the difference
of light emission on the screen. Playing a DVD or a game console may cause a similar
effect to the screen. Damages caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may
produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
CONNECtING AND PREPARING YOUR tV
USING thE DtV FEAtURE
List of Parts ........................................................ 2
Installing the Stand............................................. 2
Installing the Wall Mount Kit............................... 2
Viewing the Control Panel.................................. 3
Viewing the Connection Panel ........................... 4
Viewing the Remote Control............................... 7
Installing Batteries in the Remote Control.......... 8
Switching On and Off ......................................... 8
Placing Your Television in Standby Mode........... 8
Viewing the Menus............................................. 9
Using the TOOLS Button.................................... 9
Plug & Play....................................................... 10
Previewing the DTV Menu System .................. 27
Updating the Channel List Automatically.......... 28
Updating the Channel List Manually ................ 28
Editing Your Favourite Channels...................... 29
Selecting Channel List ..................................... 31
Displaying Programme Information.................. 31
Viewing the EPG (Electronic Programme Guide)
Information ....................................................... 32
Using the Scheduled List ................................. 33
Setting the Default Guide................................. 33
Viewing All Channels and Favourite Channels 34
Adjusting the Menu Transparency.................... 34
Setting up the Parental Lock............................ 35
Setting the Subtitle........................................... 36
Setting the Subtitle Mode................................. 36
Selecting the Audio Format.............................. 36
Selecting the Audio Description ....................... 37
Selecting the Digital Text (UK only).................. 37
Selecting the Time Zone (Spain only) .............. 38
Viewing Product Information ............................ 38
Checking the Signal Information ...................... 39
Upgrading the Software ................................... 39
Viewing Common Interface .............................. 40
Selecting the CI (Common Interface) Menu..... 40
Resetting.......................................................... 41
Selecting the Preferred Language (Subtitle,
SEttING thE ChANNELS
Storing Channels Automatically ........................11
Storing Channels Manually .............................. 12
Adding / Locking Channels .............................. 13
Sorting the Stored Channels............................ 14
Assigning Channels Names............................. 14
Fine Tuning Channel Reception....................... 15
LNA (Low Noise Amplifier) ............................... 15
SEttING thE PICtURE
Changing the Picture Standard........................ 16
Adjusting the Custom Picture........................... 17
Resetting the Picture Settings to the Factory
Defaults............................................................ 17
Changing the Picture Options .......................... 18
Audio or Teletext) ............................................. 41
Preference........................................................ 42
SEttING thE PC
SEttING thE SOUND
Setting up Your PC Software
(Based on Windows XP) .................................. 43
Display Modes.................................................. 43
Setting up the TV with your PC ........................ 44
Sound Features................................................ 20
Selecting the Sound Mode............................... 21
SEttING thE tIME
RECOMMENDAtIONS FOR USE
Setting and Displaying the Current Time.......... 22
Setting the Sleep Timer.................................... 22
Switching the Television On and Off
Teletext Feature ............................................... 45
Using the Anti-Theft KENSINGTON LOCK
(depending on the model)..................................... 46
Securing the TV to the Wall.............................. 47
Troubleshooting: Before Contacting
Automatically.................................................... 23
FUNCtION DESCRIPtION
Service Personnel............................................ 48
Technical and Environmental Specifications ... 49
Choosing Your Language................................. 23
Melody / Energy Saving .................................. 24
Selecting the Source........................................ 25
Editing the Input Source Names ...................... 26
Symbol
Press
Note
One-Touch
Button
English - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
M4XL16
Remote Control
Stand Screw
& Batteries
(AAA x 2)
Power Cord
Cover-Bottom
Stand
Cleaning Cloth
X 4
Owner’s Instructions
Warranty card / Safety Guide (Not available in all locations)
The stand and stand screw may not be included depending on the model.
Warranty card
Safety Guide
➣
➣
Installing the Stand
2
1
1. Connect your LCD TV and the stand.
➣
Two or more people should carry the TV.
Make sure to distinguish between the front and back of the stand when assembling them.
ꢀ. Fasten two screws at position 1 and then fasten two screw at position 2.
➣
➣
Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed
down, it may lean to one side.
➣
The stand is installed for models with the screen size of 37 inch and above.
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV on
the wall.
For detailed information on installing the wall mount, see the
instructions provided with the Wall Mount items. Contact a
technician for assistance when installing the wall mounted bracket.
Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you elect to install the TV on
your own.
Do not install your Wall Mount Kit while your TV is turned
on. It may result in personal injury due to electric shock.
➣
Remove the stand and cover the bottom hole with a
cap and fasten with two screws.
English - ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Control Panel
Side Panel buttons
1
2
3
4
5
6
5
The product colour and shape may vary depending on the model.
1
SOURCE
5
6
Speakers
(Power)
Press to turn the TV on and off.
Toggles between all the available input
sources (TV, Ext., AV, Component, PC, HDMI1,
HDMI2, DTV). In the on-screen menu, use this
button as you use the ENtER
remote control.
Power Indicator
Blinks and turns off when the power is on and
lights up in stand-by mode.
button on the
2
3
MENU
Remote Control Sensor
Aim the remote control towards this spot on
the TV.
Press to see an on-screen menu of your TV’s
features.
Press to decrease or increase the volume.
In the on-screen menu, use the
buttons as you use the
the remote control.
◄
and
►
buttons on
4
Press to change channels. In the on-screen
menu, use the
the and
buttons as you use
buttons on the remote control.
▲
▼
(Without the Remote Control, you can turn on
the TV by using the Channel buttons.)
English - ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Connection Panel
[tV Rear Panel]
[tV Side Panel]
1
2
3
4 5
6
7
Power Input
!
0
9
8
➣
The product colour and shape may vary depending on the model.
➣
➣
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
1 PC IN [PC] / [AUDIO]
Connect to the video and audio output jack on your PC.
-
2 COMPONENt IN
-
Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of
your set and the other ends to corresponding component video out connectors on the DTV or DVD.
If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top
Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y")
on your set.
-
-
-
The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y,
B-Y and R-Y or Y, Cb and Cr.
Connect RCA audio cables (optional) to [R - AUDIO - L] on the rear of your set and the other ends
to corresponding audio out connectors on the DTV or DVD.
3 hDMI IN 1, hDMI IN ꢀ
-
-
-
Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
No additional Audio connection is needed for an HDMI to HDMI connection.
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
English - ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
➣
-
What is HDMI?
“High Definition Multimedia interface” allows the transmission of high definition digital video data
and multiple channels of digital audio.
-
The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable
(not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has
the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports
multi - channel digital audio.
DVI IN(hDMIꢀ) [R-AUDIO-L]
DVI audio outputs for external devices.
Supported modes for HDMI/DVI and Component
-
➣
480i
X
480p
X
576i
X
576p
O
720p
O
1080i
O
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
X
O
X
X
O
O
O
O
O
O
O
O
4 AUDIO OUt [R-AUDIO-L]
-
Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends
to corresponding audio in connectors on the Amplifier or DVD Home Theatre.
5 ANt IN
To view television channels correctly, a signal must be received by the set from one of the following
sources:
An outdoor aerial / A cable television network / A satellite network
-
6 SERVICE
-
Connector for SERVICE only.
7
COMMON INtERFACE Slot
-
-
When CI Card isn’t inserted in some channels, "Scrambled
Signal" is displayed on the screen.
The pairing information containing a telephone number, CI Card
ID, Host ID and other information will be displayed in about 2~3
minutes. If an error message is displayed, please contact your
service provider.
-
When the channel information configuration has finished, the
message "Updating Completed" is displayed, indicating that
the channel list is now updated.
➣
You must obtain a CI Card from a local cable service provider. Remove the CI Card by carefully
pulling it out with your hands since dropping the CI Card may cause damage to it.
Insert the CI-Card in the direction marked on it.
➣
➣
The place of the COMMON INTERFACE Slot may be different depending on its model.
8 DIGItAL AUDIO OUt (OPtICAL)
Connect to a Digital Audio Component.
-
➣
When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV
outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the Optical jack on
the DVD player or Cable/Satellite Box directly to an Amplifier or Home Theater, not the TV.
English - ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
9 EXt
Input
Audio (L/R)
O
Output
Connector
EXT
Video
O
RGB
O
Video + Audio (L/R)
Only TV or DTV output is available.
-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
0 AV IN [VIDEO]/[R-AUDIO-L]
-
-
Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio
out connectors on the A/V device.
! KENSINGtON LOCK (depending on the model)
-
The Kensington lock (optional) is a device used to physically fix the system when used in a public
place.
-
-
If you want to use a locking device, contact the dealer where you purchased the TV.
The location of the kensington lock may be different depending on its model.
English - ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Remote Control
teletext Functions
1 Television Standby button
2 Exit from the teletext display
7 Teletext size selection
8 Teletext reveal
2 Selects the TV and DTV
mode directly
3 Number buttons for direct
channel access
9 Fastext topic selection
4
5
One/Two-digit channel selection
0 Alternately select Teletext,
Double, or Mix.
: Volume increase
: Volume decrease
+
! Teletext store
6 Temporary sound switch-off
@ Teletext mode selection
(LIST/FLOF)
7 Use to quickly select
frequently used functions.
# Teletext sub page
8 Use to see information on
the current broadcast
$ P : Teletext next page
P
: Teletext previous page
9 Colour buttons :
Use these buttons in the
Channel list, etc.
% Teletext hold
& Teletext cancel
( Teletext index
! Electronic Program Guide
(EPG) display
@ Available source selection
# Previous channel
TOOLS
$ P : Next channel
P
: Previous channel
% Returns to the previous
menu
^ Control the cursor in the menu
& Exit the on-screen menu
* Picture size selection
( Displays the main on-screen
menu
) Displays the Channel List on
screen
a Digital subtitle display
➣
The performance of the remote control may be affected by bright light.
English - ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the
figure.
ꢀ. Install two AAA size batteries.
➣
Make sure to match the "+" and "–" ends of the batteries with the
diagram inside the compartment.
ꢁ. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t
be using the remote control for a long time.
➣
➣
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Switching On and Off
the mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
➣
The standby indicator lights up on your set.
ꢀ. Press the button on your set.
➣
➣
You also can press the POWER button or the tV/DtV button on the remote control to turn
the TV on.
The channel that you were watching last is reselected automatically.
ꢁ. Press the numeric button (0~9) or channel up/down (
/
) button on the remote control or
button on your set.
➣
When you switch the set on for the very first time, you will be asked to choose language in which the
menus are to be displayed.
ꢂ. To switch your set off, press the POWER button again.
Placing Your television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. the standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER button on the remote control.
➣
The screen is turned off and a red standby indicator appears on your set.
ꢀ. To switch your set back on, simply press the POWER , numeric buttons (0~9), tV/DtV button or
channel up/down ( ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday,
/
➣
for example).
It is best to unplug the set from the mains and aerial.
English - ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Menus
tV
Picture
1. With the power on, press the MENU button.
Mode
:
Standard
Backlight
Contrast
Brightness
Sharpness
Colour
ꢅ
The main menu appears on the screen. The menu’ s left side
has icons: Picture, Sound, Channel, Setup, Input, Digital Menu.
9ꢃ
ꢂꢃ
ꢃ0
ꢃ0
ꢃ0
ꢀ. Press the ▲ or ▼ button to select one of the icons.
tint
G
ꢃ0
R
Picture Options
Reset
Then press the ENtER
button to access the icon’s sub-
: OK
menu.
ꢁ. Press the EXIt button to exit.
Move
Enter
Return
The on-screen menus disappear from the screen after about
one minute.
Using the tOOLS Button
You can use the tOOLS button to select your frequently used
functions quickly and easily. The “Tools” menu change depending on
which external input mode you are viewing.
tools
Picture Mode
Sound Mode
Sleep timer
SRS tS Xt
Energy Saving
Dual l-ll
◄
:
Standard
Custom
Off
►
:
1. Press the tOOLS button.
:
Off
:
Off
Mono
The “Tools” menu will appear.
:
ꢀ. Press the ▲ or ▼ button to select a menu.
ꢁ. Press the ▲/▼/◄/►/ENtER
buttons to display, change, or
use the selected items. For a more detailed description of each
function, refer to the corresponding page.
Move
Adjust
Exit
TOOLS
• Picture Mode, see page 16
• Sound Mode, see page 20
• Sleep Timer, see page 22
• SRS TS XT, see page 20
• Energy Saving, see page 24
• Dual l-ll, see page 21
• Auto Adjustment, see page 44
English - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Plug & Play
Plug & Play
When the tV is initially powered on, several basic settings
proceed automatically and subsequently. the following
settings are available.
Any functions related to Digital TV (DVB) will only work in
countries or areas where DVB-T (MPEG2) digital terrestrial
signals are broadcasted. Please confirm with your local
dealer if you can receive DVB-T signals. Although this TV set
follows the DVB-T specification, maintaining compatibility with
the future coming DVB-T digital terrestrial broadcasts is not
guaranteed. Several functions may not be available in some countries.
Start Plug & Play.
OK
Enter
1. Press the POWER button on the remote control.
The message "Start Plug & Play." is displayed with "OK" selected.
ꢀ. Select the appropriate language by pressing the
▲
or
▼
button.
Press the ENtER button to confirm your choice.
ꢁ. Press the or button to select “Store Demo” or “Home Use”, then the ENtER
◄
►
button.
We recommend setting the TV to "Home Use" mode for the best picture in your home
environment.
"Store Demo" mode is only intended for use in retail environments.
If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use”
(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and
hold the MENU button on the TV for 5 seconds
ꢂ. The message "Check antenna input." is displayed with "OK" selected.
Press the ENtER
button.
Please check that the antenna cable is connected correctly.
ꢃ. Select the appropriate country by pressing the or button.
Press the ENtER button to confirm your choice.
ꢄ. The message “Some DTV functions may not be available. Digital Scan?” is displayed.
Press the ◄ or ► button to select “Yes” or “No”, then press the ENtER button.
▲
▼
Yes
:
First an Analogue TV search is performed and then a Digital TV ch. auto search is per-
formed.
No
:
Only an Analogue TV search is performed.
This function is supported for all countries except for the following countries: France, Germany,
Italy, Netherlands, Spain, Switzerland, United Kingdom, Austria.
ꢅ. The "Auto Store" menu is displayed with the "Start" selected. Press the ENtER
button.
The channel search will start and end automatically.
The DTV channel scan menu appears and the DTV channel is automatically updated.
If the DTV channel is updated, the Source in the source list of the Input menu is automatically
changed to DTV.
After all the available channels are stored, the "Clock Set" menu appears.
Press the ENtER
button at any time to interrupt the memorization process.
For detailed descriptions about DTV channel update, refer to page 28 of this manual.
After all the available digital channels are stored, the screen to select a time zone is displayed
depending on the country.
ꢆ. Press the ENtER
button.
Select the "Month", "Day", "Year", "Hour", or "Min" by pressing the
◄
or
►
button.
Set the "Month", "Day", "Year", "Hour", or "Min" by pressing the
▲
or
▼
button.
You can also set the “Month”, “Day”, “Year”, “Hour” and "Min" by pressing the number buttons on
the remote control.
English - 10
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Press the ENtER
button to confirm your setting. The message “Enjoy your viewing” is displayed.
button.
button is not pressed, the message will automatically disappear after
When you have finished, press the ENtER
Even if the ENtER
several seconds.
Language: Select your language.
Country: Select your country.
Auto Store: Automatically scans for and stores channels available in the local area.
Clock Set: Sets the current time for the TV clock.
If you want to reset this feature...
Setup
tV
Plug & Play
Language
: English
1. Press the MENU button to display the menu.
time
Melody
: Off
: Off
Press the
▲
or
▼
button to select "Setup" then press the
Energy Saving
ENtER
button.
ꢀ. Press the ENtER
button again, to select "Plug & Play".
For further details on setting up options, refer to the page 10.
➣
The “Plug & Play” feature is only available in the TV mode.
Move
Enter
Return
Storing Channels Automatically
You can scan for the frequency ranges available to you (and
availability depends on your country).
Automatically allocated programme numbers may not correspond
to actual or desired programme numbers. however, you can sort
numbers manually and clear any channels you do not wish to
watch.
Channel
tV
Country
: United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine tune
LNA
: Off
1. Press the MENU button to display the menu.
Press the
ENtER
▲
button.
or
▼
button to select "Channel", then press the
Move
Enter
Return
ꢀ. Press the ENtER
button to select "Country".
ꢁ. Select the appropriate country by pressing the
▲
or
▼
button.
Press the ENtER button to confirm your choice.
➣
Even though you have changed the country setting in this menu, the country setting for DTV is
not changed. (Refer to page 28)
ꢂ. Press the
▲
or
▼
button to select "Auto Store", then press the ENtER
button.
ꢃ. Press the ENtER
button.
➣
➣
The TV will begin memorizing all of the available channels.
Press the ENtER
button at any time to interrupt the memorization process and return to the
"Channel" menu.
ꢄ. After all the available channels are stored, the "Sort" menu appears. (refer to page 14)
English - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Channels Manually
Channel
tV
Not available in DTV or external input mode.
You can store television channels, including those received
via cable networks.
When storing channels manually, you can choose:
♦ Whether or not to store each of the channels found.
♦ The programme number of each stored channel which you wish
to identify.
Country
: United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine tune
LNA
: Off
1. Press the MENU button to display the menu.
Move
Enter
Return
Press the ▲ or ▼ button to select "Channel", then press the
tV
Manual Store
ENtER
ꢀ. Press the ▲ or ▼ button to select "Manual Store", then press
the ENtER button.
ꢁ. Select the required option by pressing the ▲ or ▼ button,
then press the ENtER button.
ꢂ. When you are satisfied with your setting, press the
ENtER button.
ꢃ. Press the EXIt button to exit.
button.
Programme
Colour System
Sound System
Channel
: P 1
: Auto
: BG
: S ꢄ
Search
: 1ꢂ0 Mhz
: ?
Store
Move
Enter
Return
♦
Programme (Programme number to be assigned to a channel)
− Press the ▲ or ▼ button until you find the correct number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
♦
♦
♦
Colour System: Auto/PAL/SECAM/NtSCꢂ.ꢂꢁ
− Press the ▲ or ▼ button to select the required colour standard.
Sound System: BG/DK/I/L
− Press the ▲ or ▼ button to select the required sound standard.
Channel (When you know the number of the channel to be stored)
− Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).
− Press the ► button, then press the ▲ or ▼ button to select the required number.
You can also select the channel number directly by pressing the numeric buttons (0~9).
If there is abnormal sound or no sound, re-select the sound standard required.
♦
♦
Search (When you do not know the channel numbers)
− Press the ▲ or ▼ button to start the search.
− The tuner scans the frequency range until the first channel or the channel that you selected is
received on the screen.
Store (When you store the channel and associated programme number)
− Set to "OK" by pressing the ENtER
button.
Channel mode
− P (Programme mode): When completing tuning, the broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You can select a channel by entering the position
number in this mode.
− C (Air channel mode): You can select a channel by entering the assigned number to each air
broadcasting station in this mode.
− S (Cable channel mode): You can select a channel by entering the assigned number for each
cable channel in this mode.
English - 1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding / Locking Channels
➣
Using the Channel Manager, you can conveniently lock or add
channels.
Not available in DTV or external input mode.
Channel
tV
Country
: United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine tune
LNA
1. Press the MENU button to display the menu.
: Off
Press the
ENtER
▲
or
button.
or
▼
button to select "Channel", then press the
ꢀ. Press the
▲
▼
button to select "Channel Manager",
then press the ENtER
button.
Move
Enter
Return
Channel Manager
: Off
tV
♦
Adding channels
Using the Channel List, you can add channels.
Channel List
Child Lock
ꢁ. Select "Channel List" by pressing the ENtER
button.
ꢂ. Move to the ( ) field by pressing the ▲, ▼, ◄ or ►
button, select a channel to be added, and press the
ENtER
button to add the channel.
➣
If you press the ENtER button again, the ( ) symbol
next to the channel disappears and the channel is not
added.
Move
Enter
Return
Channel List
➣
"
" is active when "Child Lock" is selected to "On".
P
1
Cꢁ
1 / 10
Prog.
♦
Locking channels
0
1
ꢀ
ꢁ
ꢂ
ꢃ
C--
This feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by muting
out video and audio.
Cꢁ
BBC 1
Cꢅꢂ
Cꢅꢃ
Cꢅꢄ
ꢃ. Press the
the ENtER
ꢄ. Select "On" by pressing the ▲ or ▼ button, then press the
▲
or
▼
button to select "Child Lock", then press
button.
ꢄ
ꢅ
ꢆ
Sꢁ
Sꢂ
Sꢄ
ENtER
button.
ꢅ. Press the
▲
or
▼
button to select "Channel List",
button.
then press the ENtER
9
Sꢅ
ꢆ. Move to the " " field by pressing the ▲, ▼, ◄ or ► button,
select a channel to be locked, and press the ENtER
button.
Add
Lock
Move
Page
Enter
Return
➣
If you press the ENtER
next to the channel disappears and the channel lock is
cancelled.
button again, the ( ) symbol
➣
A blue screen is displayed when "Child Lock" is activated.
9. Press the EXIt button to exit.
➣
Select "On" or "Off" in "Child Lock" to easily turn the
channels which selected on " " to be active or inactive.
You can select these options by simply pressing the Ch LISt
button on the remote control.
English - 1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Sorting the Stored Channels
this operation allows you to change the programme numbers
of the stored channels.
this operation may be necessary after using the auto store.
tV
Channel
: United Kingdom
Country
Auto Store
Manual Store
Channel Manager
Sort
➣
Not available in DTV or external input mode.
Name
Fine tune
LNA
: Off
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENtER
ꢀ. Press the
ENtER
button.
or
button.
▲
▼
button to select "Sort", then press the
Move
Enter
Sort
Return
tV
Prog.
Ch.
Name
ꢁ. Select the channel number that you wish to change by
pressing the ▲ or ▼ button.
0
1
ꢀ
ꢁ
ꢂ
ꢃ
ꢄ
ꢅ
ꢆ
9
C--
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
Cꢀꢁ
S0ꢄ
S0ꢅ
S09
S1ꢀ
S1ꢁ
S1ꢂ
S1ꢅ
Cꢀ1
Press the ENtER button.
➣
The selected channel number and name are moved to
right side.
ꢂ. Select the number of the programme to which the channel is to
be moved by pressing the ▲ or ▼ button.
Move
Enter
Return
ꢃ. Press the ENtER button. The channel is moved to its new
position and all other channels are shifted accordingly.
ꢄ. Repeat steps ꢁ to ꢃ for another channel to be sorted.
ꢅ. Press the EXIt button to exit.
Assigning Channels Names
tV
Channel
: United Kingdom
Channel names will be assigned automatically when channel
information is broadcast. these names can be changed,
allowing you to assign new names.
Country
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine tune
LNA
➣
Not available in DTV or external input mode.
: Off
1. Press the MENU button to display the menu.
Press the
ENtER
▲
button.
or
▼
button to select "Channel", then press the
button to select "Name", then press the
Move
Enter
Return
ꢀ. Press the
▲
or
▼
tV
Name
Name
ENtER
button.
Prog.
Ch.
ꢁ. If necessary, select the channel to be assigned to a new
0
1
ꢀ
ꢁ
ꢂ
ꢃ
ꢄ
ꢅ
ꢆ
9
C--
-----
-----
-----
-----
-----
-----
-----
-----
-----
-----
Cꢀꢁ
S0ꢄ
S0ꢅ
S09
S1ꢀ
S1ꢁ
S1ꢂ
S1ꢅ
Cꢀ1
name by pressing the
button.
▲
or
▼
button. Press the ENtER
➣
The selection bar is displayed around the name box.
ꢂ.
to...
then...
Move
Enter
Return
Select a letter, number or symbol
Move on the next letter
Move back the previous letter
Confirm the name
Press the ▲ or ▼ button
Press the ► button
Press the ◄ button
Press the ENtER
button
➣
The following characters are available: Letters of the alphabet (A~Z) / Numbers
(0~9) / Special characters (+, -, *, /, space)
ꢃ. Repeat steps ꢁ to ꢂ for each channel to be assigned to a new name.
ꢄ. Press the EXIt button to exit.
English - 1ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Fine tuning Channel Reception
Use fine tuning to manually adjust a particular channel for
tV
Channel
: United Kingdom
Country
optimal reception.
Auto Store
Manual Store
Channel Manager
Sort
➣
Not available in DTV or external input mode.
Name
Fine tune
LNA
1. Use the number buttons to directly select the channel that
: Off
you want to fine tune.
ꢀ. Press the MENU button to display the menu.
Press the
ENtER
▲
or
▼
button to select "Channel", then press the
button.
Move
Enter
Return
Fine tune
ꢁ. Press the
▲
or
▼
button to select "Fine Tune", then press
the ENtER
button.
ꢂ. Press the
◄
or
►
button to adjust the fine tuning.
P 1
Press the ENtER button.
0
ꢃ. Press the EXIt button to exit.
Reset
Save
➣
➣
Fine tuned channels that have been saved are marked
with an asterisk " " on the right-hand side of the channel
*
Adjust
Return
number in the channel banner. And the channel number
turns red.
To reset the fine-tuning, select "Reset" by pressing the
▲
or
▼
button and then press the ENtER
button.
LNA (Low Noise Amplifier)
If the tV is operating in a weak-signal area, the LNA function
can improve the reception (a low-noise preamplifier boosts
the incoming signal).
tV
Channel
: United Kingdom
Country
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine tune
LNA
➣
Not available in DTV or external input mode.
: Off
1. Press the MENU button to display the menu.
Press the
ENtER
▲
button.
or
▼
button to select "Channel", then press the
button to select "LNA", then press the
Move
Enter
Return
ꢀ. Press the
▲
or
▼
tV
Channel
: United Kingdom
ENtER
button.
Country
Auto Store
Manual Store
Channel Manager
Sort
ꢁ. Press the
▲
or
▼
button to select "Off" or "On".
button.
Press the ENtER
Name
Fine tune
LNA
ꢂ. Press the EXIt button to exit.
:
Off
On
Move
Enter
Return
English - 1ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Picture Standard
You can select the type of picture which best corresponds to
your viewing requirements.
tV
Picture
Mode
:
Standard
Backlight
Contrast
Brightness
Sharpness
Colour
ꢅ
9ꢃ
ꢂꢃ
ꢃ0
ꢃ0
ꢃ0
1. Press the MENU button to display the menu.
Press the ENtER
button, to select "Picture".
tint
G
ꢃ0
R
Picture Options
Reset
ꢀ. Press the ENtER
button again, to select "Mode".
: OK
ꢁ. Press the
▲
or
▼
button to select the desired picture effect.
button.
Press the ENtER
Move
Enter
Return
ꢂ. Press the EXIt button to exit.
tV
Picture
♦ Dynamic: Selects the picture for high-definition in a bright
Mode
:
Dynamic
Standard
Movie
Backlight
Contrast
Brightness
Sharpness
Colour
ꢅ
room.
9ꢃ
ꢂꢃ
ꢃ0
ꢃ0
ꢃ0
♦ Standard: Selects the picture for optimum display in a
tint
G
ꢃ0
R
normal environment.
Picture Options
Reset
: OK
♦ Movie: Selects the picture for comfortable display in a
dark room.
Move
Enter
Return
The Picture mode must be adjusted separately for each
input source.
tools
Easy Setting
Picture Mode
Sound Mode
Sleep timer
SRS tS Xt
Energy Saving
Dual l-ll
◄
Standard
►
1. Press the tOOLS button on the remote control.
ꢀ. Press the ▲ or ▼ button to select "Picture Mode".
ꢁ. Press the ◄ or ► button to select the required option.
ꢂ. Press the EXIt or tOOLS button to exit.
:
Custom
Off
:
:
:
:
Off
Off
Mono
Move
Adjust
Exit
English - 1ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Custom Picture
Your set has several settings which allow you to control
picture quality.
tV
Picture
Mode
:
Standard
Backlight
Contrast
Brightness
Sharpness
Colour
ꢅ
9ꢃ
ꢂꢃ
ꢃ0
ꢃ0
ꢃ0
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 16)
tint
G
ꢃ0
R
Picture Options
Reset
: OK
ꢀ. Press the
▲
or
button.
or
▼
button to select a particular item. Press the
ENtER
ꢁ. Press the
◄
►
button to decrease or increase the value of
Move
Enter
Return
ꢅ
a particular item. Press the ENtER
button.
ꢂ. Press the EXIt button to exit.
▲
Backlight
▼
♦ Backlight: Adjusts the screen brightness by adjusting the
LCD backlight brightness. (0~10)
Move
Adjust
Return
♦ Contrast: Adjusts the lightness and darkness between
objects and the background.
♦ Brightness: Adjusts the brightness of the whole screen.
♦ Sharpness: Adjusts the outline of objects to either
sharpen them or make them more dull.
♦ Colour: Adjusts the colours, making them lighter or
darker.
♦ tint: Adjusts the colour of objects, making them more red or
green for a more natural look.
The adjusted values are stored according to the selected Picture mode.
In PC mode, you can only make changes to "Backlight", "Contrast" and "Brightness".
In Analogue TV, Ext., AV modes of the PAL system, you cannot use the "Tint" Function.
You can return to the factory defaults picture settings by selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 17)
The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and that this will reduce the overall running cost.
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
tV
Picture
Mode
:
Standard
Backlight
Contrast
Brightness
Sharpness
Colour
ꢅ
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3
on page 16.
9ꢃ
ꢂꢃ
ꢃ0
ꢃ0
ꢃ0
tint
G
ꢃ0
R
Picture Options
Reset
ꢀ. Press the
▲
button.
or
▼
button to select "Reset", then press the
:
OK
Cancel
ENtER
ꢁ. Press the
▲
or
▼
button to select "OK" or "Cancel".
button.
Move
Enter
Return
Press the ENtER
ꢂ. Press the EXIt button to exit.
The "Reset" will be set for each Picture mode.
English - 1ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Picture Options
1. Press the MENU button to display the menu.
tV
Picture
Mode
:
Standard
Press the ENtER
button, to select "Picture".
Backlight
Contrast
Brightness
Sharpness
Colour
ꢅ
9ꢃ
ꢂꢃ
ꢃ0
ꢃ0
ꢃ0
ꢀ. Press the ▲ or ▼ button to select “Picture Options”, then
press the ENtER button.
tint
G
ꢃ0
R
ꢁ. Select the required option by pressing the ▲ or ▼ button,
then press the ENtER button.
Picture Options
Reset
: OK
ꢂ. When you are satisfied with your setting, press the
ENtER button.
Move
Enter
Return
ꢃ. Press the EXIt button to exit.
tV
Picture Options
➣
In PC mode, you can only make changes to the
“Colour Tone” and “Size” from among the items in “Picture
Options”.
Colour tone
Size
: Normal
: Auto Wide
: 1ꢄ:9
Screen Mode
Digital NR
: Auto
: Normal
hDMI Black Level
♦
♦
Colour tone: Coolꢀ/Cool1/Normal/Warm1/Warmꢀ
You can select the most comfortable colour tone to your eyes.
➣
The adjusted values are stored according to the selected
Picture mode.
Move
Enter
Return
➣
“Warm1” or “Warm2” is only activated when the picture mode is "Movie".
Size: Auto Wide/1ꢄ:9/Wide Zoom/Zoom/ꢂ:ꢁ/Just Scan
You can select the picture size which best corresponds to your viewing requirements.
♦ Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.
♦ 1ꢄ:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
♦ Wide Zoom: Magnify the size of the picture more than 4:3.
♦ Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
♦ ꢂ:ꢁ: This is the default setting for a video movie or normal broadcasting.
♦ Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i)
or Component (1080i) signals are input.
➣
➣
➣
"Auto Wide" function is available only in "TV", "DTV", "Ext." and "AV" mode.
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of
the TV.
➣
➣
➣
Temporary image retention may occur when viewing a static image on the set for more than two
hours.
Wide Zoom: Move the screen up/down using the ▲ or ▼ button after selecting the
pressing the ► or ENtER button.
Zoom: Select by pressing the ◄ or ►button.
Use the ▲ or ▼button to move the picture up and down. After selecting
by
,
use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.
➣
After selecting “Just Scan” in hDMI (10ꢆ0i) or Component (10ꢆ0i) mode:
Select
by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select “Reset”, then press the ENtER button.
You can initialize the setting.
O You can select these options by simply pressing the P.SIZE
button on the remote control.
English - 1ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
♦
Screen Mode: 1ꢄ:9/ Wide Zoom/Zoom/ꢂ:ꢁ
When setting the picture size to "Auto Wide" in a 16:9 wide TV, you can determine the picture size
you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European
country requires different picture size so this function is intended for users to select it.
♦ 1ꢄ:9: Sets the picture to 16:9 wide mode
♦ Wide Zoom: Magnify the size of the picture more than 4:3.
♦ Zoom: Magnify the size of the picture vertically on screen.
♦ ꢂ:ꢁ: Sets the picture to 4:3 normal mode.
This function is available in "Auto Wide" mode.
This function is not available in "Component" or "HDMI" mode.
♦
♦
Digital NR: Off/Low/Medium/high/Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction
feature to help reduce any static and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture is displayed.
hDMI Black Level: Normal/Low
You can select the black level on the screen to adjust the screen depth.
This function is active only when the external input connects to HDMI(RGB signals).
English - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Features
tV
Sound
1. Press the MENU button to display the menu.
Mode
:
Custom
Press the ▲ or ▼ button to select "Sound", then press the
Equalizer
SRS tS Xt
Auto Volume
tV Speaker
:
:
:
Off
Off
On
ENtER
ꢀ. Select the required option by pressing the ▲ or ▼ button,
then press the ENtER button.
button.
ꢁ. When you are satisfied with your setting, press the ENtER
button.
Move
Enter
Return
ꢂ. Press the EXIt button to exit.
tools
♦
Mode: Standard/Music/Movie/Speech/Custom
You can select the type of special sound effect to be used
when watching a given broadcast.
Picture Mode
Sound Mode
Sleep timer
SRS tS Xt
Energy Saving
Dual l-ll
:
Standard
◄
Custom
Off
►
:
:
:
:
Off
Easy Setting
Off
Mono
1. Press the tOOLS button on the remote control.
ꢀ. Press the ▲ or ▼ button to select "Sound Mode".
ꢁ. Press the ◄ or ► button to select the desired sound mode.
ꢂ. Press the EXIt or tOOLS button to exit.
Move
Adjust
Exit
tV
Equalizer
♦
Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz
The sound settings can be adjusted to suit your personal
preferences.
R
➣
If you make any changes to these settings, the sound
mode is automatically switched to "Custom".
L
Balance 100hz ꢁ00hz 1khz ꢁkhz 10khz
Move
Adjust
Return
♦
SRS TS XT: Off/On
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel
content over two speakers. TruSurround delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal television speakers. It is fully
compatible with all multichannel formats.
tools
Easy Setting
Picture Mode
Sound Mode
Sleep timer
SRS TS XT
Energy Saving
Dual l-ll
: Standard
: Custom
: Off
1. Press the tOOLS button on the remote control.
ꢀ. Press the ▲ or ▼ button to select "SRS TS XT".
ꢁ. Press the ◄ or ► button to select the "Off" or "On".
ꢂ. Press the EXIt or tOOLS button to exit.
◄ Off
►
: Off
: Mono
Move
Adjust
Exit
truSurround Xt, SRS and
Symbol are trademarks of SRS Labs,
Inc.truSurround Xt technology is incorporated under license from
SRS Labs, Inc.
English - ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
♦
♦
Auto Volume: Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume
every time the channel is changed. This feature lets you automatically adjust the volume of the
desired channel by lowering the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is low.
TV Speaker: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplifier.
➣
➣
The
+,
- and MUtE buttons do not operate when the "TV Speaker" is set to "Off".
When "TV Speaker" is set to "Off", the Sound menus cannot be adjusted.
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
Selecting the Sound Mode
You can set the sound mode in the "tools" menu.
When you set to "Dual I-II", the current sound mode is
displayed on the screen.
tools
Picture Mode
Sound Mode
Sleep timer
SRS tS Xt
Energy Saving
Dual l-ll
: Standard
: Custom
: Off
: Off
1. Press the tOOLS button on the remote control.
ꢀ. Press the ▲ or ▼ button to select “Dual I-II".
ꢁ. Press the ◄ or ► button to select required option.
: Off
◄ Mono
►
ꢂ. Press the ENtER
button.
Move
Adjust
Exit
Audio Type
Dual 1/2
MONO
Default
Mono
Stereo
Dual
Automatic
change
A2
Stereo
STEREO
DUAL 1 ↔ DUAL
↔
MONO
2
DUAL 1
Mono
Stereo
MONO
Automatic
change
NICAM
Stereo
MONO
MONO
DUAL
↔
STEREO
↔
DUAL
1
Dual
DUAL 1
2
If the stereo signal is weak and an automatic switching occurs,
then switch to the Mono.
This function is only activated in stereo sound signal. It is
deactivated in mono sound signal.
This function is only available in Analogue TV mode.
English - ꢀ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting and Displaying the Current time
Setup
tV
You can set the tV’s clock so that the current time is
displayed when you press the INFO button. You must also set
the time if you wish to use the automatic On/Off timers.
Plug & Play
Language
time
: English
Melody
: Off
: Off
Energy Saving
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENtER
ꢀ. Press the ▲ or ▼ button to select "Time", then press the
ENtER button.
ꢁ. Press the ENtER
ꢂ.
button.
Move
Enter
Return
Clock Set
Day
tV
button to select "Clock Set".
Month
p
01
q
hour
Year
ꢀ00ꢆ
to...
Press the...
01
Move to "Month", "Day", "Year", "Hour" or
"Minute"
◄ or ► button.
Minute
00
Set the "Month", "Day", "Year", "Hour" or
"Minute"
00
▲ or ▼ button.
Confirm the setting
ENtER
button.
Move
Adjust
Return
ꢃ. Press the EXIt button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set "Year", "Month", "Day", "Hour" and "Minute" by pressing the number buttons on
the remote control.
Setting the Sleep timer
You can select a time period of between ꢁ0 and 1ꢆ0 minutes
tV
Setup
after which the television automatically switches to standby
mode.
Plug & Play
Language
time
: English
Melody
: Off
: Off
Energy Saving
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENtER
ꢀ. Press the ▲ or ▼ button to select "Time", then press the
ENtER button.
ꢁ. Press the ▲ or ▼ button to select "Sleep Timer", then press
the ENtER button.
button.
Move
Enter
Return
tV
time
Clock Set
Sleep timer
timer 1
: 00 : 00
:
:
:
:
Off
ꢁ0
ꢄ0
ꢂ. Press the ▲ or ▼ button repeatedly until the desired time
timer ꢀ
timer ꢁ
appears (Off, 30, 60, 90, 120, 150, 180).
90
1ꢀ0
1ꢃ0
1ꢆ0
Press the ENtER
button.
ꢃ. Press the EXIt button to exit.
The TV automatically switches to standby mode when the
timer reaches 0.
Move
Enter
Return
tools
Easy Setting
Picture Mode
Sound Mode
Sleep Timer
SRS tS Xt
Energy Saving
Dual l-ll
: Standard
: Custom
◄ Off
1. Press the tOOLS button on the remote control.
ꢀ. Press the ▲ or ▼ button to select “Sleep Timer”.
ꢁ. Press the ◄ or ► button to select the minute.
ꢂ. Press the EXIt or tOOLS button to exit.
►
: Off
: Off
: Mono
Move
Adjust
Exit
English - ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the television On and Off Automatically
1. Press the MENU button to display the menu.
Setup
tV
Plug & Play
Press the ▲ or ▼ button to select "Setup", then press the
Language
: English
time
ENtER
ꢀ. Press the ▲ or ▼ button to select "Time", then press the
ENtER button.
ꢁ. Press the ▲ or ▼ button to select "Timer 1", "Timer 2",
"Timer 3", then press the ENtER button.
Three different On/Off Timer Settings can be made.
button.
Melody
: Off
: Off
Energy Saving
Move
Enter
Return
➣
ꢂ. Press the ◄ or ► button to select the required item below.
You must set the clock first.
timer 1
tV
On time
5
Press the ▲ or ▼ button to adjust to the setting satisfied.
:
00
00
00
Off
Off
6
Off time
00
♦ On time: Select hour, minute, and "On"/"Off". (To activate
:
timer with the setting satisfied, set to "On".)
Repeat
Once
Volume
10
♦ Off time: Select hour, minute, and "On"/"Off". (To activate
timer with the setting satisfied, set to "On".)
♦ Repeat: Select "Once", "Everyday", "Mon~Fri", "Mon~Sat",
►
Move
Adjust
Return
or "Sat~Sun".
♦ Volume: Select the desired turn on volume level.
You can set the hour and minute directly by pressing the number buttons on the remote control.
Auto Power Off
When you set the timer On, the TV will eventually turn off, if no controls are operated for 3 hours
after the TV was turned on by timer. This function is only available in timer On mode and prevents
overheating, which may occur if a TV is on for too long time.
Choosing Your Language
When you start using your set for the first time, you must
select the language which will be used for displaying menus
and indications.
Setup
tV
Plug & Play
Language
time
: English
Melody
: Off
: Off
Energy Saving
1. Press the MENU button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENtER
ꢀ. Press the ▲ or ▼ button to select "Language", then press
the ENtER button.
button.
Move
Enter
Return
ꢁ. Select a particular language by pressing the ▲ or ▼ button
repeatedly.
Press the ENtER
button.
ꢂ. Press the EXIt button to exit.
English - ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Melody / Energy Saving
tV
1. Press the MENU button to display the menu.
Setup
Plug & Play
Language
time
Press the ▲ or ▼ button to select "Setup", then press the
: English
ENtER
ꢀ. Select the required option by pressing the ▲ or ▼ button,
then press the ENtER button.
ꢁ. When you are satisfied with your setting, press the
ENtER button.
ꢂ. Press the EXIt button to exit.
button.
Melody
: Off
: Off
Energy Saving
Move
Enter
Return
♦
Melody: Off/Low/Medium/high
The TV power on/off melody sound can be adjusted.
➣
the Melody does not play
- When no sound is output from the TV because the MUtE button has been pressed.
- When no sound is output from the TV because the
- When the TV is turned off by Sleep Timer function.
(Volume) button has been pressed.
♦
Energy Saving: Off/Low/Medium/high
This feature adjusts the screen brightness depending on the surrounding lighting conditions.
− Off: Turns off the energy saving function.
− Low: Sets the TV to low energy saving mode.
− Medium: Sets the TV to medium energy saving mode.
− high: Sets the TV to high energy saving mode.
Easy Setting
1. Press the tOOLS button on the remote control.
ꢀ. Press the ▲ or ▼ button to select “Energy Saving”.
ꢁ. Press the ◄ or ► button to select the "Off","Low",
"Medium" or "High".
ꢂ. Press the EXIt or tOOLS button to exit.
tools
Picture Mode
Sound Mode
Sleep timer
SRS tS Xt
Energy Saving
Dual l-ll
: Standard
: Custom
: Off
: Off
◄ Off
►
: Mono
Move
Adjust
Exit
English - ꢀꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Source
You can select among external sources connected to your
tV’s input jacks.
Input
tV
Source List
Edit Name
:
tV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the
ENtER
button.
ꢀ. Press the ENtER
button again, to select "Source List".
Available signal sources: TV, Ext., AV, Component, PC,
HDMI1, HDMI2, DTV.
Move
Enter
Return
You can choose only those external devices that are
connected to the TV.
ꢁ. Select the required device by pressing the ▲ or ▼ button.
Source List
tV
tV
Ext.
:
:
:
:
:
:
----
----
----
----
----
----
AV
Component
PC
Press the ENtER
button.
hDMI1
hDMIꢀ
DtV
Move
Enter
Return
O
Press the SOURCE button on the remote control to toggle
between all the available source.
TV mode can be selected by pressing the tV/DtV button,
number buttons(0~9), and the P
/
button on the remote
control.
English - ꢀꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing the Input Source Names
Name the device connected to the input jacks to make your
input source selection easier.
Input
tV
Source List
Edit Name
:
tV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the
ENtER
ꢀ. Press the ▲ or ▼ button to select "Edit Name", then press
the ENtER button.
button.
Move
Enter
Return
ꢁ. Press the ▲ or ▼ button to select the device that you wish to
Edit Name
tV
edit.
Ext.
:
:
:
:
:
:
----
-
-
-
-
----
VCR
DVD
Press the ENtER
ꢂ. Press the ▲ or ▼ button to select the required device.
Press the ENtER button.
button.
AV
Component
PC
Cable StB
hDMI1
hDMIꢀ
-
Satellite StB
PVR StB
AV Receiver
Game
ꢃ. Press the EXIt button to exit.
q
Move
Enter
Return
English - ꢀꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Previewing the DTV Menu System
Digital Menu
♦ The company does not guarantee the normal operation of the
DTV menu for countries other than the supported countries
(France, Germany, Italy, Netherlands, Spain, Switzerland, United
Kingdom, Austria) because only these country standards are
supported.
TV
Guide
Digital Channel
Setup
Language
In addition, when the country of the broadcast stream differs from
the country selected by the current user, the string appearing in
the channel banner, Info, Guide, Channel Manager, etc. may not
be displayed properly.
Move
Enter
Return
♦ Available in DTV mode. Preset to the DTV mode by using the
TV/DTV button on your remote control. To help you navigate
around the on-screen menu system and adjust the various
settings available, refer to the following illustration.
Guide
DTV
Now & Next Guide
Full Guide
Scheduled List
Default Guide
Press the MENU button to display the menu.
: Full Guide
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER
button.
Guide
Now & Next Guide
Full Guide
Scheduled List
Default Guide
Move
Enter
Return
DTV
Channel
:
Country
Auto Store
Manual Store
Edit Favourite Channels
Channel List
United Kingdom
Now/Next, Full Guide
Digital Channel
Country
Auto Store
Manual Store
Edit Favourite Channels
Channel List
Move
Enter
Return
All, Favourites, Default
DTV
Setup
Setup
Menu Transparency : Medium
Change PIN
Parental Lock
Menu Transparency
Change PIN
Parental Lock
Subtitle
Subtitle Mode
Audio Format
Audio Description
High, Medium, Low, Opaque
Subtitle
Subtitle Mode
: Off
Off, On
Normal, Hard of hearing
PCM, Dolby Digital
Move
Enter
Language
Return
Audio Description
Volume
Off, On
DTV
Digital Text
Time Zone
Common Interface
System
Audio Language
Subtitle Language
Teletext Language
Preference
Disable, Enable
Application Info, CI Menu
Product Information
Signal Information
Software Upgrade
Reset
Move
Enter
Return
Language
Audio Language
Subtitle Language
Teletext Language
Preference
Primary Audio Language
Secondary Audio Language
Primary Subtitle Language
Secondary Subtitle Language
Primary Teletext Language
Secondary Teletext Language (depending on the country)
➣
The sub-items of the CI Menu may vary depending on the CAM model.
English - 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Updating the Channel List Automatically
DTV
Channel
You can update the channel list when the broadcaster adds new
Services or if you move the TV to a new location.
Country
Auto Store
Manual Store
:United Kingdom
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press
the ENTER button.
Edit Favourite Channels
Channel List
2. Press the ▲ or ▼ button to select "Digital Channel", then
press the ENTER button.
Move
Enter
Return
3. Press the ENTER button again, to select "Country".
4. Select the appropriate country by pressing the ▲ or ▼ button.
35%
DTV
Auto Store
Press the ENTER button to confirm your choice.
➣
Even though you have changed the country setting in this
menu, the country setting for Analogue TV is not changed.
(Refer to page 11)
Scanning for digital services...
Services found: 24 Channel: 38
5. Press the ▲ or ▼ button again, to select "Auto Store".
Stop
Press the ENTER button.
Return
➣
When it has finished, the number of scanned services will
be displayed.
➣
➣
The existing favourite channel list will not be deleted when the channel list is updated.
To stop the scan before it has finished, press the ENTER button with "STOP" selected.
6. Press the EXIT button to exit.
If the signal status is poor, the "No Service found! Check the aerial connection" message is
displayed.
➣
Updating the Channel List Manually
You can specify the channel for a fast channel search.
DTV
Manual Store
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press
the ENTER button.
Channel
Frequency
177500
Bandwidth
▲
5
KHz
MHz
7
▼
2. Press the ▲ or ▼ button to select "Digital Channel", then
press the ENTER button.
Search
3. Press the ▲ or ▼ button to select "Manual Store", then press
Adjust
Return
the ENTER button.
4. Press the ▲ or ▼ button to select the required option, then press the ENTER button.
➣
− Channel : Channel "5" to "69" in sequence are displayed (depending on the country)
− Frequency : The frequency available in the Channel group is displayed.
− Bandwidth : The available bandwidths are 7 and 8 MHz.
➣
Press the red button to start the scan for digital services.
When it has finished, channels are updated in the channel list.
5. When it has finished, the number of scanned services will be displayed.
6. Press the EXIT button to exit.
English - 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Your Favourite Channels
You can edit your favourite channels using the four colour
buttons.
DTV
Edit Favourite Channels
(no channels)
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Digital Channel", then press
Add Channels
the ENTER button.
Return
3. Press the ▲ or ▼ button to select "Edit Favourite Channels",
then press the ENTER button.
4. Press the red button to display all currently stored channels.
5. Press the ▲ or ▼ button to select a channel you want.
Press the ENTER button.
DTV
Edit Favourite Channels
➣
A " " icon is shown next to the selected channel and the
5
2
5
channel will be added to the favourite channel list.
BBC TWO
Five
BBC THREE
abc1
➣
•
•
•
•
To undo, press the ENTER button again.
Select All: Select all channels currently displayed.
Select None: Deselect all selected channels.
Preview: Displays (a) currently selected channel(s).
7
15
16
6
QVC
➣
The Favourite Channels settings have been completed.
Preview
Select All
Select None
6. Press the EXIT button to exit.
Move
Select
Return
♦ Add
DTV
You can use this function when one or more favourite channels
have been selected.
Edit Favourite Channels
2
BBC TWO
BBC THREE
abc1
★
★
★
7
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
15
2. Press the ▲ or ▼ button to select "Digital Channel", then press
Add
Renumber
Preview Delete
the ENTER button.
Move
Return
3. Press the ▲ or ▼ button to select "Edit Favourite Channels",
then press the ENTER button.
4. Press the red button in the "Edit Favourite Channels" menu.
To add more channels, refer to the step 5 on the previous
5.
If you want to check the channel to be stored, press RETURN
button.
Press the EXIT button to exit.
DTV
Edit Favourite Channels
5
2
5
BBC TWO
Five
BBC THREE
abc1
★
➣
• To add all channels to the favourite channel list, press the
red button.
7
★
★
15
16
6
• To remove all channels, press the green button.
• Preview : Displays (a) currently selected channel(s).
• Press the CH LIST button to display the favourite channel
manager.
QVC
Select All
Select None
Preview
Move
Select
Return
English - 29
Download from Www.Somanuals.com. All Manuals Search And Download.
♦ Renumber (depending on the country)
DTV
Edit Favourite Channels
BBC TWO
BBC THREE
2
★
★
★
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
---
15 abc1
2. Press the ▲ or ▼ button to select "Digital Channel", then press
the ENTER button.
3. Press the ▲ or ▼ button to select "Edit Favourite Channels",
Edit
Return
then press the ENTER button.
Confirm
4. Select the required channel using the ▲ or ▼ button.
5. Press the green button.
➣
The space for entering the number is a blank.
6. Enter the new channel number. Press ENTER
button to store
or RETURN button to cancel.
➣
➣
Press the ◄ button to delete an entered digit.
If you enter a number already assigned to another channel,
the number is assigned to the selected channel and the
previous number assigned to the selected channel is
assigned to the other channel.
That is, the two numbers are exchanged.
➣
The Favourite Channels are automatically sorted in
ascending order of channel numbers.
7. Press the EXIT button to exit.
♦ Preview
DTV
Edit Favourite Channels
BBC TWO
BBC THREE
2
7
★
★
★
1. In the "Edit Favourite Channels" menu, select the channel to be
previewed by pressing the ▲ or ▼ button.
2. Press the yellow button.
15 abc1
➣
The selected channel is displayed on the screen.
Add
Renumber
Preview
Delete
Move
Return
♦ Delete
DTV
Edit Favourite Channels
1. In the "Edit Favourite Channels" menu, select the channel to be
deleted from the favourite channels list by pressing the
▲ or ▼ button.
2
7
BBC TWO
★
★
BBC THREE
2. Press the blue button.
➣
➣
The selected channel and number will be deleted.
To add a deleted channel back in to the favourite channel
list, see "Add" on page 29.
Add
Renumber
Preview
Delete
Move
Return
English - 30
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Channel List
You can exclude the channels you have chosen from the
channels you have scanned.When you scan through the
stored channels, those you have chosen to skip are not
displayed. All channels that you do not specifically choose to
skip are displayed during scanning.
Channel List
All Channels-All
1/2
Test Card M' v2.0
1
3
4
5
6
Test Card M' v2.0
23 bid-up.tv
25 TCM
60 Television X
70 BBC Radio 1
72 BBC Radio 2
73 BBC Radio 3
74 BBC Radio 4
84 heat
Vida003b
Vida004b
vida005b
vida006b
26 UKTV Style
27 Discovery
28 DiscoveryH&L
15 Cartoon Nwk
33 Boomerang
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press
the ENTER button.
15 Ch 15
16 QVC
91 MOJO
17 UKTV Gold
55 Ttext Holidays
800 ARD-MHP-Data
More
6
Previous Page
Move
Next/Page
Favourites
TV
2. Press the ▲ or ▼ button to select "Digital Channel", then press
Watch
Return
the ENTER button.
3. Press the ▲ or ▼ button to select "Channel List".
Press the ENTER button.
4. Press the ▲ or ▼ button to select "All", "Favourites" or "Default".
Press the ENTER button.
5. Press the yellow button to toggle between your favourite channels
It can be displayed simply by
pressing the CH LIST button.
and all channels.
➣
Your favourite channels are only displayed if they were
previously set in the "Editing Your Favourite Channels" menu
(refer to page 29).
6. Press the red or green button to display the previous or next channel List page.
7. Press the ▲ or ▼ button to select a channel to be tuned.
Press the ENTER button.
➣
The channel number, name and an icon are displayed in the top left corner while changing the
channel. The channel number and name are displayed if the channel is one of the all channels,
and a icon if the channel is one of the favourite channels.
8. Press the blue button to toggle between your "TV", "Radio", "Data/Other" and "All".
9. Press the CH LIST button to exit from the channel List.
Displaying Programme Information
While viewing a channel, additional information about the current programme may be displayed.
1. While viewing a programme, press the INFO button.
➣
The programme information is displayed.
2. To exit from banner information, press the INFO button.
14:30 Sat 1 Sep
AII Channels
➣
The information is displayed:
− Parental Rating
− Video Type: SD, HD, Radio
− Audio Type: Mono, Stereo, Dual, Dolby Digital
− Existence of Teletext or DVB Subtitle
− Audio Language
A
1 AFDO,16:9
AFDO 16:9
No Block
SD
Stereo
Subtitle
English
14:30~14:33
Contains video with AFD O; coded frame
is 16:9
Exit
English - 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the EPG (Electronic Programme Guide) Information
Now & Next Guide
the EPG (Electronic Programme Guide) information is provided
13:28 Wed 16 Feb
27 Discovery
by the broadcasters. Programme entries may appear blank or
Extreme Machines: Armoured Cars
out of date as a result of the information broadcast on a given
INFO
channel. the display will dynamically update as soon as new
information becomes available.
Now
Next
♦ Now & Next Guide
For the six channels indicated in the left-hand column,
displays the Current programme and the Next programme
information.
Watch
Full Guide
Favourites
Exit
Full Guide
♦ Full Guide
13:28 Wed 16 Feb
27 Discovery
Displays the programme information as time ordered One
hour segments. two hours of programme information is
displayed which may be scrolled forwards or backwards in
time.
Extreme Machines: Armoured Cars
INFO
Today
13:00
14:00
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENtER button.
Watch
Now/Next
Favourites
-24Hours
+24Hours
Exit
ꢀ. Press the ENtER button, to select "Guide".
ꢁ. Press the ▲ or ▼ button to select "Now & Next Guide" or
"Full Guide".
Press the ENtER button.
➣
You can also display the guide menu simply by pressing
the GUIDE button.
TOOLS
ꢂ.
to...
then...
• Select a programme by pressing
the ▲, ▼, ◄, ► button.
Watch a programme in the EPG list
• Press the ENtER
button.
If the next programme is selected, it is scheduled with the clock icon
displayed. If the ENtER button is pressed again, the scheduling is
cancelled with the clock icon gone. For details about scheduling
programmes, refer to the next page.
• Select a programme of your choice by
pressing the ▲, ▼, ◄, ► button.
View programme information
• Press the INFO button when the
programme of your choice is
highlighted.
Toggle between the "Now & Next
Guide" or "Full Guide"
• Press the red button repeatedly.
• Press the green button repeatedly.
Display the "Favourites" and the "All
Channels" list
Scrolls backwards quickly (24 hours).
Scrolls forward quickly (24 hours).
Exit the guide
• Press the yellow button repeatedly.
• Press the blue button repeatedly.
• Press the EXIt button.
➣
➣
The programme title is on the upper part of the screen center. Please click on INFO button for
the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality
Information(HD/SD), Sound Modes, Subtitle or Teletext, Languages of Subtitle or Teletext, and
brief summary of the highlighted programme are included on the detailed information. "..." will be
appeared if the summary is long.
Six channels are displayed. To scroll between channels, move to a channel using the ▲ or ▼ button.
To display page by page, use the P
<
or P
>
button.
English - ꢁꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Scheduled List
If you make a scheduled viewing list of programs you may like to
see, the channel will be automatically switched to the scheduled
programme at the scheduled time even if you are watching another
programme.
DtV
Scheduled List
(No programmes)
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENtER button.
Add Programme
ꢀ. Press the ENtER button, to select "Guide".
Return
ꢁ. Press the ▲ or ▼ button to select "Scheduled List", then press
the ENtER button.
ꢂ. Press the red button.
The channel will be switched to the scheduled programme.
DtV
Scheduled List
ꢃ. Press the ENtER button to select an item and adjust with the
tuesday ꢀꢀ Apr
1ꢃ:ꢁ0 ~ 1ꢄ:00
Once
▲ or ▼ button .
ꢆ01 Raitre
➣
You can also set hour and minute by pressing the number
buttons on the remote control.
•
•
•
•
Channel: Set the channel.
time: Set the time.
Date: Set Year, Month and Day.
Frequency: Set the frequency.
Add Programme
Edit
Delete
Move
Return
("Once", "Daily", or "Weekly")
ꢄ. After setting the schedule, Press the red button.
ꢅ. Press the EXIt button to exit.
➣
•
•
•
•
•
DtV
Save: Save the adjusted schedule.
Cancel: Cancel the adjusted schedule.
Add Programme: Add a new schedule.
Edit: Readjust the selected schedule.
Delete: Delete the selected schedule.
Scheduled List
Channel
ꢆ0ꢀ RaiUno
time
Date
1ꢃ : ꢀ0 to -- : --
tue ꢀꢀ Apr ꢀ00ꢅ
Frequency
Once
Save
Cancel
Adjust
Move
Return
Setting the Default Guide
You can preset the default guide style.
DtV
Guide
Now & Next Guide
Full Guide
Scheduled List
Default Guide
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENtER button.
:
Now/Next
Full Guide
ꢀ. Press the ENtER button, to select "Guide".
ꢁ. Press the ▲ or ▼ button to select "Default Guide", then press
Move
Enter
Return
the ENtER button.
ꢂ. Select "Now/Next" or "Full Guide" using the ▲ or ▼ button,
and press the ENtER button.
ꢃ. Press the EXIt button to exit.
You can select these options
by simply pressing the GUIDE
button on the remote control.
English - ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing All Channels and Favourite Channels
In the EPG menu, you can display all channels or favourite
channels.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENtER button.
Now & Next Guide
13:28 Wed 16 Feb
Extreme Machines: Armoured Cars
27 Discovery
ꢀ. Press the ENtER button again, to select "Guide".
INFO
ꢁ. Select the your required guide ("Now & Next Guide" or "Full
Now
Next
Guide") by pressing the ▲ or ▼ button.
ꢂ. Press the ENtER button.
ꢃ. Press the green button.
All the channel lists and the Favourite Channel lists will be
Watch
Full Guide
Favourites
Exit
toggled.
ꢄ. Select a programme of your choice by pressing the ▲, ▼, ◄, or
► button.
ꢅ. Press the INFO button to display information about the
Full Guide
highlighted programme.
13:28 Wed 16 Feb
27 Discovery
Extreme Machines: Armoured Cars
ꢆ. When the Edit Favourite Channels list has not been set up:
•
"The favourites list is empty.
INFO
the favourites list is empty.
Would you like to choose your
favourites now?
Would you like to choose your favourites now?" message is
displayed.
Today
Yes
No
•
Select "Yes".
The "Edit Favourite Channels" menu is displayed.
If you select "No", all channels will remain unchanged.
Watch
Now/Next
Favourites
-24Hours
+24Hours
Exit
• To edit the favourite channels, refer to page 29 for more
details.
9 . Press the EXIt button to exit.
➣
"All Channels" is the list of channels that have been scanned by the channel list update.
All channels are displayed in the all channel mode.
➣
"Favourites" (favourite channels) is the list of channels that has been set in the "Edit Favourite Channels"
menu (refer to page 29).
Adjusting the Menu transparency
You can set the Transparency of the menu.
DtV
Setup
Menu transparency :
high
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENtER button.
Change PIN
Parental Lock
Subtitle
Medium
Low
:
Opaque
Subtitle Mode
ꢀ. Press the ▲ or ▼ button to select "Setup", then press the
ENtER button.
ꢁ. Press the ▲ or ▼ button to select "Menu Transparency" then
Move
Enter
Return
press the ENtER button.
ꢂ. Select the required option ("High", "Medium", "Low", or
"Opaque") by pressing the ▲ or ▼ button, and press the
ENtER button to change the setting.
ꢃ. Press the EXIt button to exit.
English - ꢁꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the Parental Lock
DTV
This feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by a 4-digit
PIN (Personal Identification Number) code that is defined by the
user. The on-screen menu will instruct you to assign a PIN code
(you can change it later, if necessary).
Setup
Menu Transparency : Medium
Change PIN
Parental Lock
Subtitle
Subtitle Mode
: Off
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
Move
Enter
Return
2. Press the ▲ or ▼ button to select "Setup", then press
DTV
Parental Lock
the ENTER button.
Enter PIN
3. Press the ▲ or ▼ button to select "Parental Lock", then
press the ENTER button.
4.
The "Enter PIN" is displayed.
5. Enter your current 4-digit PIN code by using the numeric
buttons (0~9).
➣
➣
The default PIN code for a new TV set is 0000.
If you enter an invalid PIN code,the "Invalid PIN code.
Please try again." message is displayed.
Enter PIN
Return
DTV
Parental Lock
▲
Parental Rating:
6. Press the ENTER button.
NN
oo BBlloocckk
3
4
5
6
7
7. Press the ▲ or ▼ button to select the age rating you want to
lock out.
Press the ENTER button.
▼
Move
Return
Enter
♦
Change PIN
DTV
Setup
Menu Transparency : Medium
Change PIN
Parental Lock
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
Subtitle
Subtitle Mode
: Off
2. Press the ▲ or ▼ button to select "Setup", then press
the ENTER button.
Move
Enter
Return
3. Press the ▲ or ▼ button to select "Change PIN", then
press the ENTER button.
➣
The "Enter PIN" is displayed.
DTV
Change PIN
Confirm New PIN
4. Enter your current 4-digit PIN code by using the numeric
buttons (0~9).
➣
The “Enter New PIN” is displayed.
5. Enter your new PIN code by using the numeric buttons (0~9)
The "Confirm New PIN" is displayed.
Your PIN code has been changed successfully.
➣
OK
6. Re-enter your new PIN code to confirm by using the numeric
buttons (0~9).
Enter PIN
Return
➣
The Your PIN code has been changed successfully message
is displayed.
7. Press the ENTER button.
8. Press the EXIT button to exit.
➣
If you forget the PIN code, press the remote control buttons in the following sequence, which
resets the PIN to 0-0-0-0: POWER (Off), MUTE, 8, 2, 4, POWER (On).
English - 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Subtitle
You can activate and deactivate the subtitles.
DtV
Setup
Menu transparency : Medium
Change PIN
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENtER button.
Parental Lock
Subtitle
Subtitle Mode
:
Off
On
: N
ꢀ. Press the ▲ or ▼ button to select "Setup", then press the
ENtER button.
Move
Return
ꢁ. Press the ▲ or ▼ button to select "Subtitle ", then press the
Enter
ENtER button.
ꢂ. Select "On" by pressing the ▲ or ▼ button. Press the ENtER
button.
ꢃ. Press the EXIt button to exit.
You can select these options simply by pressing the
SUBt. button on the remote control.
Setting the Subtitle Mode
Use this menu to set the Subtitle Mode. "Normal" under the
menu is the basic subtitle and "hard of hearing" is the subtitle
for a hearing-impaired person.
DtV
Setup
Menu transparency : Medium
Change PIN
Parental Lock
Subtitle
Subtitle Mode
: On
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENtER button.
: Normal
Normal
hard of hearing
Move
Enter
Return
ꢀ. Press the ▲ or ▼ button to select "Setup", then press the
ENtER button.
ꢁ. Press the ▲ or ▼ button to select "Subtitle Mode", then press
the ENtER button.
ꢂ. Press the ▲ or ▼ button to select "Normal" or "Hard of hearing". Press the ENtER button.
ꢃ. Press the EXIt button to exit.
➣
If the programme you are watching does not support the "Hard of hearing" function, "Normal"
automatically activates even though "Hard of hearing" mode is selected.
Selecting the Audio Format
You can only hear Dolby Digital sound through the audio
receiver connected through an optical cable. You can only hear
PCM sound through the main speaker.
When sound is emitted from both the main speaker and the
audio receiver, a sound echo may occur due to the decoding
speed difference between the main speaker and the audio
receiver. In this case, use the internal mute function.
DtV
Setup
Audio Format
: PCM
Audio Description
Digital text
: Enable
time Zone
Common Interfece
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENtER button.
Move
Enter
Return
ꢀ. Press the ▲ or ▼ button to select "Setup", then press the ENtER button.
ꢁ. Press the ▲ or ▼ button to select "Audio Format", then press the ENtER button.
ꢂ. Press the ▲ or ▼ button to select "PCM" or "Dolby Digital". Press the ENtER button.
ꢃ. Press the EXIt button to exit.
➣
The Audio Format appears according to the broadcasting signal.
Dolby digital sound is only available when the TV is connected with an external speaker using an
optical cable.
English - ꢁꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Audio Description
this is an auxiliary audio function that provides an additional
audio track for visually challenged persons. this function
handles the Audio Stream for the AD (Audio Description),
when it is sent along with the Main audio from the broadcaster.
Users can turn the Audio Description On or Off and control the
volume.
DtV
Setup
Audio Format
: PCM
Audio Description
Digital text
: Enable
time Zone
Common Interfece
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENtER button.
Move
Enter
Return
DtV
Audio Description
ꢀ. Press the ▲ or ▼ button to select "Setup", then press the
Audio Description :
Volume
Off
On
100
ENtER button.
ꢁ. Press the ▲ or ▼ button to select "Audio Description", then
press the ENtER button.
ꢂ. Press the ▲ or ▼ button to select "On", then press the
ENtER button.
ꢃ. Press the ▲ or ▼ button to select "Volume", then press the
Move
Enter
Return
ENtER button.
DtV
Audio Description
➣
"Volume" is active when "Audio Description" is set to "On".
Audio Description : On
Volume
100
ꢄ. Press the ◄ or ► button until you reach the optimal setting.
Press the ENtER button.
ꢅ. Press the EXIt button to exit.
Move
Enter
Return
Selecting the Digital text (UK only)
If the programme is broadcast with digital text, this feature is
enabled.
DtV
Setup
Audio Format
: PCM
Audio Description
Digital text
time Zone
Common Interfece
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENtER button.
:
Disable
Enable
ꢀ. Press the ▲ or ▼ button to select "Setup", then press the
ENtER button.
Move
Enter
Return
ꢁ. Press the ▲ or ▼ button to select "Digital Text", then press
the ENtER button.
ꢂ. Press the ▲ or ▼ button to select "Disable" or "Enable". Press the ENtER button.
ꢃ. Press the EXIt button to exit.
➣
MHEG(Multimedia and Hypermedia Information Coding Experts Group) An International standard for data
encoding systems used in multimedia and hypermedia. This is at a higher level than the MPEG system
which includes data-linking hypermedia such as still images, character service, animation, graphic and video
files as well as multimedia data. MHEG is user runtime interaction technology and is being applied to various
fields including VOD (Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), tele-education,
tele-conferencing, digital libraries and network games.
English - ꢁꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the time Zone (Spain only)
Select the local time zone.
DtV
Setup
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENtER button.
Audio Format
Audio Description
Digital text
: PCM
: Enable
time Zone
ꢀ. Press the ▲ or ▼ button to select "Setup", then press the
Common Interfece
ENtER button.
ꢁ. Press the ▲ or ▼ button to select "Time Zone", then press the
Move
Enter
time Zone
Return
ENtER button.
DtV
ꢂ. Select the time zone where you locate by pressing the
▲ or ▼ button.
the Iberian Peninsula and Balearic Islands
Press the ENtER button.
Canary Islands
➣
The following options are available
The Iberian Peninsula and Balearic Islands -
Canary Islands
ꢃ. Press the EXIt button to exit.
Adjust
Enter
Return
Viewing Product Information
You can view your product information. For service or repair,
please contact a Samsung approved dealer.
DtV
Product Information
Software Version: t-PERLDEUC-0010
Firmware Version: t-EMMAꢀDEUB-010ꢃ
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENtER button.
ꢀ. Press the ▲ or ▼ button to select "Setup", then press the
ENtER button.
Return
ꢁ. Press the ▲ or ▼ button to select "System", then press
the ENtER button.
ꢂ. Press the ENtER button again, to select "Product
Information".
➣
The Product Information menu is selected.
- Software Version, Firmware Version
ꢃ. Press the EXIt button to exit.
English - ꢁꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the Signal Information
You can get information about the signal status.
DtV
Signal Information
Service: ?
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENtER button.
Service ID:0000
Multiplex: ? (tSID 0000, ONID 0000)
Network: ? (ID 0000)
Bit error level:
10
0
Signal Strength:
ꢀ. Press the ▲ or ▼ button to select "Setup", then press the
ENtER button.
Return
ꢁ. Press the ▲ or ▼ button to select "System", then press the
ENtER button.
ꢂ. Press the ▲ or ▼ button to select "Signal Information", then press the ENtER button.
ꢃ. Press the EXIt button to exit.
➣
If the signal status is poor, the "No signal." message is displayed.
Upgrading the Software
to keep your product up-to-date with new Digital television
features then software upgrades are periodically broadcast as
part of the normal television signal.
It will automatically detect these signals and display the
software upgrade banner. You are given the option to install the
upgrade.
DtV
System
Product Information
Signal Information
Software Upgrade
Reset
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENtER button.
Move
Enter
Return
DtV
Software Upgrade
Software Information
ꢀ. Press the ▲ or ▼ button to select "Setup", then press the
ENtER button.
Manual Upgrade
ꢁ. Press the ▲ or ▼ button to select "System", then press the
Standby Mode upgrade : On
ENtER button.
ꢂ. Press the ▲ or ▼ button to select "Software Upgrade",
then press the ENtER button.
ꢃ. Press the ▲ or ▼ button to select “Software Information”,
Move
Enter
Return
“Manual Upgrade” or “Standby Mode upgrade”.
Press the ENtER
Software Information
Press the ENtER button, then the current software version is shown. To display the software
version information, press the ENtER button again.
button.
♦
To switch to an alternative version, press the red button.
Press the blue button to reset, activate the upgrade and restart.
♦
♦
Manual Upgrade
Press the ENtER
Standby Mode Upgrade: On / Off
button to search for new software from the currently broadcasting channels.
Press the ENtER
button. To continue software upgrade with master power on, Select On
by pressing the ▲ or ▼ button. 45 minutes after entering standby mode, a manual upgrade is
automatically conducted. Since the power of the unit is turned on internally, the screen may be on
slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software
upgrade is completed.
ꢄ. Press the EXIt button to exit.
English - ꢁ9
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Common Interface
This contains information on CAM inserted in the CI slot and
displays it.
DtV
Application Info
type : CA
Manufacturer : Channel Plus
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENtER button.
Info : top Up tV
ꢀ. Press the ▲ or ▼ button to select "Setup", then press the
ENtER button.
Return
ꢁ. Press the ▲ or ▼ button to select "Common Interface", then
press the ENtER button.
ꢂ. Press the ENtER button to display the information for
your application.
ꢃ. Press the EXIt button to exit.
➣
The Application Info inserting is about the CI CARD.
You can install the CAM anytime whether the TV is ON or
OFF.
1. Purchase the CI CAM module by visiting your nearest dealer
or by phone.
ꢀ. Insert the CI CARD into the CAM in the direction of the
arrow until it fits.
ꢁ. Insert the CAM with the CI CARD installed into the common
interface slot.
(Insert the CAM in the direction of the arrow, right up to the
end so that it is parallel with the slot.)
ꢂ. Check if you can see a picture on a scrambled signal channel.
Selecting the CI (Common Interface) Menu
this enables the user to select from the CAM-provided menu.
CI Menu
Main menu
Module information
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENtER button.
Smart card information
Language
Software Download
ꢀ. Press the ▲ or ▼ button to select "Setup", then press the
ENtER button.
Press OK to select, or Exit to quit
ꢁ. Press the ▲ or ▼ button to select "Common Interface",
Move
Enter
Exit
then press the ENtER button.
ꢂ. Select to "CI Menu" by pressing the ▲ or ▼ button, and press the
ENtER button.
ꢃ. Select the required option by pressing the ▲ or ▼ button, and press the ENtER button.
ꢄ. Press the EXIt button to exit.
➣
Select the CI Menu based on the menu PC Card.
English - ꢂ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting
You can reset the values stored to the factory default values.
DtV
Reset
Enter PIN
➣
The Reset operation deletes all channel information and
user preferences returning all values to their default factory
state.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENtER button.
ꢀ. Press the ▲ or ▼ button to select "Setup", then press the
Enter PIN
Return
Reset
ENtER button.
DtV
ꢁ. Press the ▲ or ▼ button to select "System", then press
WARNING: All channel settings and user
preferences will be lost and returned to the factory
defaults. It is recommended that a reset is performed
only when serious problems are experienced.
the ENtER button.
ꢂ. Press the ▲ or ▼ button to select "Reset", then press the
ENtER button.
ꢃ. The "Enter PIN" screen will appear.
ꢄ. Enter your current 4-digit PIN code by using the numeric
buttons (0~9).
Return
➣
The warning message is displayed. All values will be reset
by pressing the coloured buttons (red, green, yellow, and
blue) in turn.
ꢅ. Press the EXIt button to exit.
Selecting the Preferred Language (Subtitle, Audio or teletext)
You can change the default value for subtitle, audio teletext
languages.
Displays the language information for the incoming stream.
DtV
DtV
DtV
Language
Audio Language
Subtitle Language
teletext Language
Preference
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENtER button.
ꢀ. Press the ▲ or ▼ button to select "Language", then press
the ENtER button.
Move
Enter
Language
Return
ꢁ. Press the ▲ or ▼ button to select "Audio Language",
"Subtitle Language" or "Teletext Language".
Audio Language
Subtitle Language
teletext Language
Preference
Press the ENtER
button.
ꢂ. Select a particular language by pressing the ▲ or ▼ button
repeatedly.
Press the ENtER button.
➣
English is the default in cases where the selected
language is unavailable in the broadcast.
Move
Enter
Language
Return
ꢃ. Press the EXIt button to exit.
➣
While viewing a programme, the subtitle can be selected
While viewing a programme, audio languages can be
selected.
Audio Language
Subtitle Language
teletext Language
Preference
Move
Enter
Return
English - ꢂ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Preference
this menu consists of ꢄ sub-menus:
DtV
Language
Audio Language
Primary Audio Language, Secondary Audio Language, Primary
Subtitle Language, Secondary Subtitle Language, Primary
teletext Language, Secondary teletext Language.
Subtitle Language
teletext Language
Preference
Using this feature, users can select one of the languages
(English, German, Italian, Swedish, French, Welsh, Gaelic, Irish,
Danish, Finnish, Spanish, Dutch). The language selected here is the
default when the user selects a channel.
Move
Enter
Return
♦
Press the ▲ or ▼ button to select required menu (Primary
Audio Language, Secondary Audio Language, Primary Subtitle Language, Secondary Subtitle
Language, Primary Teletext Language, Secondary Teletext Language), then press the ENtER
button. The options of the selected menu are displayed.
♦
Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENtER
button to confirm your choice.
➣
If you change the language setting, the Subtitle Language, Audio Language, and the Teletext
Language of the Language menu (refer to page 41) are automatically changed to the selected
language.
➣
The Subtitle Language, Audio Language, and the Teletext Language of the Language menu show a
list of languages supported by the current channel and the selection is highlighted. If you change this
language setting, the new selection is only valid for the current channel. The changed setting does not
change the setting of the Primary Subtitle Language, Primary Audio Language, or the Primary Teletext
Language of the Preference menu.
English - ꢂꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your PC Software (Based on Windows XP)
the Windows display-settings for a typical computer are shown below. the
actual screens on your PC may be different depending upon your particular
version of Windows and your particular video card. Even if your actual
screens look different, the same, basic set-up information will apply in almost
all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1. First, click on "Control Panel" on the Windows start menu.
ꢀ. When the control panel window appears, click on "Appearance and Themes"
and a display dialog-box will appear.
ꢁ. When the control panel window appears, click on "Display" and a display
dialog-box will appear.
ꢂ. Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution): Optimum- 1360 X 768
If a vertical-frequency option exists on your display settings dialog box, the correct value is
"60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution.
the resolutions in the table are recommended.
D-Sub Input
horizontal
Frequency (khz)
Vertical
Frequency (hz)
Pixel Clock
Frequency (Mhz)
Sync Polarity
Mode
IBM
Resolution
(h/V)
+/-
-/+
640×350
720×400
31.469
31.469
70.086
70.087
25.175
28.322
640×480
640×480
640×480
800×600
800×600
800×600
1024×768
1024×768
1024×768
1360×768
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
47.712
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
60.015
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
85.500
-/-
-/-
-/-
+/+
+/+
+/+
-/-
-/-
+/+
+/+
VESA
hDMI/DVI Input
horizontal
Frequency (khz)
Vertical
Frequency (hz)
Pixel Clock
Frequency (Mhz)
Sync Polarity
Mode
Resolution
(h/V)
640×480
800×600
1024×768
1360×768
31.469
37.879
48.363
47.712
59.940
60.317
60.004
60.015
25.175
40.000
65.000
85.500
-/-
+/+
-/-
VESA
+/+
➣
➣
➣
➣
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
English - ꢂꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the tV with your PC
tV
Picture
Preset: Press the SOURCE button to select PC mode.
Mode
:
Standard
ꢅ
Backlight
1. Press the MENU button to display the menu.
Contrast
9ꢃ
ꢂꢃ
ꢃ0
Brightness
Sharpness
Auto Adjustment
Screen Adjustment
Picture Options
Reset
Press the ENtER
ꢀ. Select the required option by pressing the ▲ or ▼ button,
then press the ENtER button.
ꢁ. When you are satisfied with your setting, press the
ENtER button.
ꢂ. Press the EXIt button to exit.
button, to select "Picture".
: OK
Move
Enter
Return
♦
Auto Adjustment
Auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal. The values of fine, coarse and
position are adjusted automatically.
Auto Adjustment in progress
Please wait.
tools
Easy Setting
Picture Mode
Sound Mode
Sleep timer
: Standard
: Custom
: Off
: Off
: Off
1. Press the tOOLS button on the remote control.
ꢀ. Press the ▲ or ▼ button to select “Auto Adjustment”, then
press the ENtER
SRS tS Xt
Energy Saving
Auto Adjustment
button.
Move
Enter
Exit
♦
Screen Adjustment:
Coarse/Fine
tV
Screen Adjustment
Coarse
ꢃ0
ꢁꢂ
Fine
The purpose of picture quality adjustment is to remove or
reduce picture noise. If the noise is not removed by Fine-
tuning alone, then adjust the frequency as best as possible
(coarse) and Fine-tune again. After the noise has been
reduced, re-adjust the picture so that it is aligned on the
center of screen.
Position
Image Reset
Press the ▲ or ▼ button to select "Coarse" or "Fine", then
Move
Enter
Return
press the ENtER
Press the ◄ or ► button to adjust the screen quality.
button.
tV
Position
Press the ENtER
button.
Position
Adjust the PC’s screen positioning if it does not fit the TV
screen.
Move
Enter
Return
Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
tV
Screen Adjustment
Coarse
ꢃ0
ꢁꢂ
Fine
Press the ENtER
button.
Position
Image Reset
Image Reset
You can replace all image settings with the factory default
values.
Move
Enter
Return
English - ꢂꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
teletext Feature
Most television stations provide written information services via teletext. the index page of
the teletext service gives you information on how to use the service. In addition, you can select
various options to suit your requirements by using the remote control buttons.
For teletext information to be displayed correctly, channel reception must be stable. Otherwise,
information may be missing or some pages may not be displayed.
1.
(exit)
Exit from the teletext display
2
4 (size)
Press to display the double-size letters in the upper half of the
screen. For lower half of the screen, press it again. To display
normal screen, press it once again.
6
1
3
4
5 (reveal)
Used to display the hidden text (answers to quiz games, for
example). To display normal screen, press it again.
/ (teletext on/mix)
Press to activate teletext mode after selecting the channel
providing the teletext service. Press it twice to overlap the teletext
with the current broadcasting screen.
7
8
5
6
8 (store)
Used to store the teletext pages.
9
0
0 (mode)
TOOLS
Press to select the teletext mode (LIST/FLOF). If you press it
in the LIST mode, it switches into the List save mode. In the
List save mode, you can save teletext page into list using the
8(store) button.
2
3
7
8
9
0
1 (sub-page)
Used to display the available sub-page.
!
@
2 (page up)
Used to display the next teletext page.
4
5
#
3 (page down)
Used to display the previous teletext page.
9 (hold)
Used to hold the display on a given page if the selected page is
linked with several secondary pages which follow on automatically.
To resume, press it again.
!
@
7 (cancel)
Used to display the broadcast when searching for a page.
Colour buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting company, the different topics covered on a
teletext page are colour-coded and can be selected by pressing the coloured buttons. Press one
of them corresponding to the required. The page is displayed with other coloured information that
can be selected in the same way. To display the previous or next page, press the corresponding
coloured button.
#
6 (index)
Used to display the index (contents) page at any time while you
are viewing teletext.
You can change teletext pages by pressing the numeric buttons on
the remote control.
English - ꢂꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
the teletext pages are organized according to six categories:
Part
A
B
C
D
Contents
Selected page number.
Broadcasting station identity.
Current page number or search status.
Date and time.
E
Text.
F
Status information.
FASTEXT information.
Teletext information is often divided between several pages displayed in sequence, which can be
accessed by:
♦ Entering the page number
♦ Selecting a title in a list
♦ Selecting a coloured heading (FASTEXT system)
Press the tV/DtV button to exit from the teletext display.
Using the Anti-theft KENSINGtON LOCK (depending on the model)
The Kensington lock is a device used to physically fix the system when using it in a public place.
The appearance and locking method may differ from the illustration depending on the manufacturer.
Refer to the manual provided with the Kensington lock for proper use. The locking device has to be
purchased separately.
1. Insert the locking device into the Kensington
slot on the LCD TV (Figure 1), and turn it in the
locking direction (Figure 2).
ꢀ. Connect the Kensington lock cable.
Cable
Figure 2
ꢁ. Fix the Kensington lock to a desk or a heavy
stationary object.
➣
The location of the KENSINGTON LOCK may be
different depending on its model.
Figure 1
<Optional>
English - ꢂꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Securing the tV to the Wall
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure
your children do not hang over or destabilize the TV; doing so may cause the TV to tip over,
causing serious injuries or death. Follow all safety precautions provided on the included Safety
Flyer. For added stability, install the anti-fall device for safety purposes, as follows.
to avoid the tV from falling:
1. Put the screws into the clamps and firmly fasten them onto
the wall. Confirm that the screws have been firmly installed
onto the wall.
➣
You may need additional material such as an anchor
depending on the type of wall.
Wall
➣
Since the necessary clamps, screws, and string are not
supplied, please purchase these additionally.
ꢀ. Remove the screws from the center back of the TV, put the
screws into the clamps, and then fasten the screws onto the
TV again.
➣
Screws may not be supplied with the product. In this
case, please purchase the screws of the following
specifications.
Screw Specifications
- For a 17 ~ 29 Inch LCD TV: M4 X 15
- For a 32 ~ 40 Inch LCD TV: M6 X 15
ꢁ. Connect the clamps fixed onto the TV and the clamps fixed
onto the wall with a strong string and then tie the string
tightly.
➣
Install the TV near to the wall so that it does not fall
backwards.
Wall
➣
It is safe to connect the string so that the clamps fixed on
the wall are equal to or lower than the clamps fixed on the
TV.
➣
Untie the string before moving the TV.
ꢂ. Verify all connections are properly secured. Periodically
check connections for any sign of fatigue for failure.
If you have any doubt about the security of your
connections,contact a professional installer.
English - ꢂꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
troubleshooting: Before Contacting Service Personnel
No sound or picture.
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the button on your set.
Check the picture contrast and brightness settings.
Check the volume.
Normal picture but no
sound.
Check the volume.
Check whether the MUtE
Check if "TV Speaker" is on.
button has been pressed on the remote control.
Screen is black and power
indicator light blinks steadily.
On your computer check; Power, Signal Cable.
The TV is using its power management system.
Move the computer’s mouse or press any key on the keyboard.
No picture or black and
white picture.
Adjust the colour settings.
Check that the broadcast system selected is correct.
Sound and picture
interference.
Try to identify the electrical appliance that is affecting the set and move it
further away.
Plug your set into a different mains socket.
Blurred or snowy picture,
distorted sound.
Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions.
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
'Check signal cable.'
message is displayed.
Check that the signal cable is firmly connected to the PC or video sources.
Check that the PC or video sources are turned on.
On PC mode, 'Mode Not
Supported' message is
displayed.
Check the maximum resolution and the frequency of the video adaptor.
Compare these values with the data in the Display Modes.
The damaged picture appears If "Just Scan" is selected in some external devices, the damaged picture
in the corner of the screen.
may appear in the corner of the screen. This symptom is caused by external
devices, not TV.
The 'Resets all settings to
the default values' message
appears.
This appears when you press and hold the EXIt button for a while.
The product settings are reset to the factory defaults.
The TFT LCD panel uses a panel consisting of sub pixels (3 133 440) which require sophisticated
technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will
have no impact on the performance of the product.
English - ꢂꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical and Environmental Specifications
Model Name
Screen Size (Diagonal)
PC Resolution
Sound
LE26A346
26 inch
1360 X 768 @ 60 Hz
Output
5W x 2
Dimensions (WxDxH)
744 X 80 X 447 mm
744 X 232 X 507 mm
Body
With stand
Weight
With stand
11 kg
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Stand Swivel
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
(Left / Right)
0
˚
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply and Power Consumption, refer to the label attached to the product.
English - 49
Download from Www.Somanuals.com. All Manuals Search And Download.
|