LCD TV
LE23R8
LE26R8
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
REPUBLIC OF IRELAND 0818 717 100
U.K 0870 SAMSUNG (7267864)
Web Site
Customer Care Centre
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
Record your Model and Serial number here for future reference.
▪ Model _______________ ▪ Serial No. _______________
BN68-01169E-01
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
WARNINGS:
Image retention, commonly known as screen burn-in, can occur on most types of television if the same
image is displayed continuously. The most common causes of image retention are logos that remain
stationary on the TV screen. These logos are common on many programmes received via a Setop Box.
To reduce this risk, avoid displaying still images for long durations and lower the brightness or contrast
settings to decrease the intensity of the picture. Extended viewing of movies and programs in aspect
ratios that are different from the aspect ratio of the TV may cause image retention. Always endeavour
to avoid black borders top or bottom by using the zoom function. This will help eliminate the black
borders and fit the picture to the entire area of the screen. Using a video game console may cause
image retention and is not recommended. When using a PC input, avoid displaying still images for long
durations and reduce the brightness or contrast settings to decrease the intensity of the picture.
IMPORTANT:
Image retention issues are not covered by your Samsung® warranty.
•
•
•
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image
retention. This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when
displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders
displayed on the left, right and center of the screen caused by the difference of light
emission on the screen. Playing a DVD or a game console may cause a similar effect to the
screen. Damages caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may produce
partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still
images.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
CONNeCTING AND PRePARING YOuR TV
SeTTING The SOuND
List of Parts ........................................................ 3
Installing the Stand............................................. 3
Installing the Wall Mount Kit............................... 3
Viewing the Control Panel.................................. 4
Viewing the Connection Panel ........................... 5
Viewing the Remote Control............................... 7
Installing Batteries in the Remote Control.......... 8
Switching On and Off ......................................... 8
Placing Your Television in Standby Mode........... 8
Plug & Play......................................................... 9
Changing the Sound Standard......................... 22
Adjusting the Sound Settings........................... 23
Setting the TruSurround XT (SRS TS XT)........ 23
Connecting Headphones.................................. 24
Selecting the Sound Mode............................... 24
Adjusting the Volume Automatically ................. 24
Selecting the Internal Mute .............................. 25
Listening to the Sound of the Sub Picture........ 25
Resetting the Sound Settings to the Factory
Defaults............................................................ 26
SeTTING The ChANNelS
SeTTING The TIMe
Storing Channels Automatically ....................... 10
Storing Channels Manually ...............................11
Setting the Channel Lists ................................. 12
Activating the Child Lock.................................. 12
Sorting the Stored Channels............................ 13
Assigning Channels Names............................. 13
Fine Tuning Channel Reception....................... 14
LNA (Low Noise Amplifier) ............................... 14
Setting and Displaying the Current Time.......... 26
Setting the Sleep Timer.................................... 27
Switching the Television On and Off
Automatically.................................................... 27
FuNCTION DeSCRIPTION
Choosing Your Language................................. 28
Using Game Mode ........................................... 28
Setting the Blue Screen Mode / Selecting the
Melody ............................................................. 29
Setting the Home Theater PC .......................... 29
Setting the Light Effect..................................... 30
Using the Energy Saving Feature .................... 30
Selecting the Source........................................ 31
Editing the Input Source Names ...................... 31
SeTTING The PICTuRe
Changing the Picture Standard........................ 15
Adjusting the Custom Picture........................... 15
Changing the Colour Tone................................ 16
Activating Backlight.......................................... 16
Configuring Detailed Settings on the Picture ... 17
Changing the Picture Size................................ 18
Freezing the Current Picture............................ 19
Selecting the Screen Mode.............................. 19
Resetting the Picture Settings to the
Factory Defaults............................................... 19
Digital NR / Active Colour / DNIe / Movie Plus 20
Viewing the Picture In Picture (PIP) ................. 21
HDMI Black Level............................................. 22
english - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
uSING The DTV FeATuRe
uSING The TeleTexT FeATuRe
Previewing the DTV Menu System .................. 32
Updating the Channel List Automatically.......... 33
Updating the Channel List Manually ................ 33
Editing Your Favourite Channels...................... 34
Selecting Channel List ..................................... 36
Displaying Programme Information.................. 36
Viewing the EPG
Teletext Decoder .............................................. 46
Displaying the Teletext Information .................. 47
Selecting a Specific Teletext Page................... 47
Using Fastext to Select a Teletext Page........... 48
Setting Up Your Remote Control...................... 48
Remote Control Codes..................................... 49
(Electronic Programme Guide) Information...... 37
Using the Scheduled List ................................. 38
Setting the Default Guide................................. 38
Viewing All Channels and
SeTTING The PC
Setting up Your PC Software
(Based on Windows XP) .................................. 52
Display Modes.................................................. 52
Setting the PC.................................................. 53
Favourite Channels.......................................... 39
Adjusting the Menu Translucency .................... 40
Setting up the Parental Lock............................ 40
Setting the Subtitle........................................... 41
Setting the Subtitle Mode................................. 41
Selecting the Audio Format.............................. 41
Selecting the Digital Text.................................. 42
Selecting the Time Zone (Spain only) .............. 42
Viewing Product Information ............................ 42
Checking the Signal Information ...................... 43
Upgrading the Software ................................... 43
Viewing Common Interface .............................. 44
Selecting the CI (Common Interface) Menu..... 44
Resetting.......................................................... 45
Selecting the Preferred Language
ReCOMMeNDATIONS FOR uSe
Using the Anti-Theft Kensington Lock.............. 54
Troubleshooting: Before Contacting Service
Personnel......................................................... 54
Technical and Environmental Specifications ... 55
Warning! Important Safety Instructions
Wiring the Mains Power Supply Plug (UK Only)
Warranty Card
(Audio, Subtitle or Teletext) .............................. 45
Preference........................................................ 46
Symbol
Press
Important
Note
One-Touch
Button
english - 2
Download from Www.Somanuals.com. All Manuals Search And Download.
list of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
M4 X L16
Remote Control
Stand Screw
& Batteries
Power Cord
Cover-Bottom
Stand
Cleaning Cloth
X 4
(AAA x 2)
Owner’s Instructions
Registration Cards
Registration Cards (Not available in all locations)
The stand and stand screw may not be included depending on the model.
Installing the Stand
< ꢀ >
< 2 >
1. Place the TV faced down on a soft cloth or cushion on a table.
2. Put the stand into the hole at the bottom of the TV.
ꢀ. Insert screw into the hole indicated and tighten.
The stand is installed for models with the screen size of 37 inch and above.
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount
the TV on the wall.
For detailed information on installing the wall mount,
see the instructions provided with the Wall Mount items.
Contact a technician for assistance when installing the
wall mounted bracket.
Samsung Electronics is not responsible for any damage
to the product or injury to yourself or others
if you elect to install the TV on your own.
Remove the stand and cover the bottom hole with a
cap and fasten with two screws.
english - ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Control Panel
1
2
3
4
5
6
7
[LE23R86, LE26R86, LE23R88, LE26R88]
1
2
3
4
5,6
7
[LE23R87, LE26R87, LE23R89, LE26R89]
Front Panel buttons
Touch the right side of
each button to operate.
The product colour and shape may vary depending on the model.
1
SOuRCe
4
Toggles between all the available input
sources (TV, Ext.1, Ext.2, AV, S-Video,
Component, PC, HDMI1, HDMI2, DTV).
In the on-screen menu, use this button
as you use the eNTeR/OK button on the
remote control.
Press to change channels.
In the on-screen menu, use the
buttons as you use the
the remote control.
5
and
6
buttons on
(Without the Remote Control, you can turn on
the TV by using the Channel buttons.)
2
3
MeNu
5
(Power)
Press to turn the TV on and off.
Power Indicator
Blinks and turns off when the power is on and
lights up in stand-by mode.
Press to see an on-screen menu of your TV’s
features.
In case of DTV mode, the DTV menu
appears.
6
7
Remote Control Sensor
Aim the remote control towards this spot on
the TV.
Press to decrease or increase the volume.
In the on-screen menu, use the
buttons as you use the
the remote control.
and
buttons on
Speakers
english - ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Connection Panel
1
2
3
4
5
3
6
@
!
09
8
7
Power Input
The product colour and shape may vary depending on the model.
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
1 Connecting Set-Top Box, VCR or DVD
Connector
Input
Audio (L/R)
Output
Video
RGB
Video + Audio (L/R)
EXT 1
EXT 2
Only TV or DTV output is available.
Output you can choose.
-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
2 Connecting AUDIO
- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio in connectors on the Amplifier or DVD Home Theater.
3 HDMI IN 1,HDMI IN 2
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD
players)
- No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
- “High Definition Multimedia interface” allows the transmission of high definition digital video data
and multiple channels of digital audio (5. 1 channels).
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable
(not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size,
has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports
multi - channel digital audio.
DVI IN (HDMI 2) (AUDIO R/L)
- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console
etc, make sure that it has been set to a compatible video output mode as shown in the table
below. Failure to observe this may result in picture distortion, image breakup or no picture.
- When using an HDMI/DVI cable connection, it is only possible from the HDMI 2 terminal.
You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the
“R - AUDIO - L” terminal on DVI for sound output.
Supported modes for HDMI/DVI and Component
480i
X
X
480p
X
O
576i
X
X
576p
O
X
720p
O
O
1080i
O
O
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
O
O
O
O
O
O
English - ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following
sources:
- An outdoor aerial / A cable television network / A satellite network
5 Connecting CI (Common Interface) CARD
- When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen.
- The pairing information containing a telephone number, CI CARD ID, Host ID and other information
will be displayed in about 2~3 minutes. If an error message is displayed, please contact your
service provider.
- When the channel information configuration has finished, the message "Updating Completed" is
displayed, indicating that the channel list is now updated.
You must obtain a CI CARD from a local cable service provider.
Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD
may cause damage to it.
Insert the CI-Card in the direction marked on it.
7 Connecting External A/V Devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
Camcorder.
- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corre
sponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output (6) on the rear of your set. While the
head phone is connected, the sound from the built-in speakers will be disabled.
8 Connecting Computer
- Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to
the Video Card of your computer.
- Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other
end to "Audio Out" of the sound card on your computer.
9 DIGITAL AUDIO OUT (OPTICAL)
- Connect to a Digital Audio Component.
0 SERVICE
- Service connection for qualified service engineer.
! Connecting Component Devices (DTV/DVD)
- Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of
your set and the other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box
to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on your
set.
- The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y,
B-Y and R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends
to corresponding audio out connectors on the DTV or DVD.
- This LCD TV displays its optimum picture resolution in 720p mode.
- This LCD TV displays its maximum picture resolution in 1080i mode.
@ Kensington Lock
- The Kensington lock (optional) is a device used to physically fix the system when used in a public
place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The place of the Kensington Lock may be different depending on its model.
English - ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Remote Control
1 Selects a target device to be
controlled by the Samsung
remote control (TV, DVD,
STB, CABLE, VCR)
b P : Next channel
: Previous channel
P
c Exit the OSD
(Refer to page 49~51)
d Control the cursor in the
menu
2 Television Standby button
e Use to see information on
the current broadcast
3 Number buttons for direct
channel access
g Colour buttons :
Press to add or delete
channels and to store
channels to the favorite
channel list in the “Channel
List” menu.
4
One/Two-digit channel
selection
5 It display "Channel List"
on the screen.
6 Selects the TV and DTV
mode directly
h Picture-In-Picture On / Off
i Digital subtitle display
j Picture effect selection
k Picture freeze
7 VCR/DVD Functions
Rewind, Stop, Play/Pause,
Fast/Forward
8
Volume increase
Volume decrease
l When your remote does not
work, change the batteries
and press the "RESET"
button for 2-3 seconds before
use.
9 Temporary sound switch-off
0 Menu display and
change confirmation
! Returns to the previous
Teletext Functions
menu
6 Exit from the teletext display
0 Teletext index
@ SRS TS XT selection
# Electronic Program Guide
(EPG) display
$ Teletext size selection
* Teletext mode selection
$ Picture size selection
(LIST/FLOF)
% Sound effect selection
( Teletext sub page
^
Adjusts 5 separate devices
- TV, DVD, STB, CABLE, or
b P : Teletext next page
P
: Teletext previous page
VCR
.
c Teletext cancel
& When pressing this button, a
number of buttons on the
remote control (e.g. Selects
a target device, volume,
channel buttons) light up
for a few seconds and then
turn off to save power. This
function is to conveniently use
the remote control at night or
when dark.
e Teletext reveal
f Alternately select Teletext,
Double, or Mix.
g Fastext topic selection
h Teletext hold
j Teletext store
* Available source selection
( Previous channel
) DTV menu display
a Selects the HDMI mode
directly.
The performance of the remote control may be affected by bright light.
This is a special remote control for the visually impaired, and has Braille points on the Power,
Channel, STOP, PLAY/PAUSE and Volume buttons.
english - ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the
figure.
2. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the
diagram inside the compartment.
ꢀ. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be
using the remote control for a long time. The remote control can be used
up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on the front of the set.
2. Press the button on the front of the set.
You also can press the POWeR
button or the TV/DTV button on the remote control to turn
the TV on.
The programme that you were watching last is reselected automatically.
ꢀ. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
button on the right side of the set.
When you switch the set on for the very first time, you will be asked to choose language in
which the menus are to be displayed.
ꢁ. To switch your set off, press the POWeR button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWeR button on the remote control.
The screen is turned off and a red standby indicator appears on the front of your set.
2. To switch your set back on, simply press the POWeR , numeric buttons (0~9), TV/DTV button or
channel up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for
example).
It is best to unplug the set from the mains and aerial.
english - ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Plug & Play
When the TV is initially powered on, several basic settings
proceed automatically and subsequently. The following
settings are available.
Plug & Play
Any functions related to Digital TV (DVB) will only work in
countries or areas where DVB-T (MPEG2) digital terrestrial
signals are broadcasted. Please confirm with your local
dealer if you can receive DVB-T signals. Although this TV set
follows the DVB-T specification, maintaining compatibility with
the future coming DVB-T digital terrestrial broadcasts is not
guaranteed. Several functions may not be available in some
countries.
Start Plug & Play.
OK
enter
exit
1. Press the POWeR button on the remote control.
The message "Start Plug & Play" is displayed with "OK" selected.
2. Select the appropriate language by pressing the
▲
or
▼
buttons.
Press the eNTeR/OK button to confirm your choice.
ꢀ. Press the or buttons to select “Shop” or “Home”, then the eNTeR/OK button.
◄
►
We recommend setting the TV to Home mode for the best picture in your home environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode,
press the Volume button and then hold down the MeNu button for five seconds on the side
panel of the TV.
ꢁ. The message "Check antenna input." is displayed with "OK" selected.
Press the eNTeR/OK button.
Please check that the antenna cable is connected correctly.
ꢄ. Select the appropriate country by pressing the
▲
or
▼
button.
Press the eNTeR/OK button to confirm your choice.
ꢅ. The message “Some DTV functions may not be available. Digital Scan” is displayed.
Press the ◄ or ► button to select “Yes” or “No”, then press the eNTeR/OK button.
Yes
:
First an ATV search is performed and then a DTV ch. auto search is performed.
No
:
Only an ATV search is performed.
This function is supported for all countries except for the following 6 countries: the United
Kingdom, Austria, France, Germany, Italy and Spain.
ꢂ. The "Auto Store" menu is displayed with the "Start" selected. Press the eNTeR/OK button.
The channel search will start and end automatically.
The DTV channel scan menu appears and the DTV channel is automatically updated.
If the DTV channel is updated, the Source in the source list of the Input menu is automatically
changed to DTV.
After all the available channels are stored, the "Clock Set" menu appears.
Press the eNTeR/OK button at any time to interrupt the memorization process.
For detailed descriptions about DTV channel update, refer to page 33 of this manual.
After all the available digital channels are stored, the screen to select a time zone is displayed
depending on the country.
ꢃ. Press the eNTeR/OK button.
Select the "Month", "Day", "Year", "Hour", or "Minute" by pressing the
Set the "Month", "Day", "Year", "Hour", or "Minute" by pressing the
◄
or
or
▼
►
buttons.
buttons.
▲
You can also set the hour and minute by pressing the number buttons on the remote control.
9. Press the eNTeR/OK button to confirm your setting.
language: Select your language.
Country: Select your country.
Auto Store: Automatically scans for and stores channels available in the local area.
Clock Set: Sets the current time for the TV clock.
english - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
If you want to reset this feature...
TV
Plug & Play
language
Time
1. Press the MeNu button to display the menu.
:english
Press the
▲
or
▼
button to select "Setup", then press the
Game Mode
Blue Screen
Melody
:Off
:Off
:Off
eNTeR/OK button.
PC
2. Press the eNTeR/OK button again, to select "Plug & Play".
home Theater PC :Off
light effect
More
:
Watchung Mode On
ꢀ. The message "Start Plug & Play" is displayed.
Move
enter
Return
Plug & Play
Start Plug & Play.
OK
enter
Return
Channel
TV
Country
: Belgium
Auto Store
- Storing Channels Automatically
- Storing Channels Manually
Manual Store
Channel Manager
Sort
Name
Fine Tune
lNA
: Off
Move
enter
Return
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. however, you can sort numbers manually and clear any channels you do not wish to watch.
1. Press the MeNu button to display the menu.
Press the
2. Press the eNTeR/OK button to select "Country".
3. Select the appropriate country by pressing the
Press the eNTeR/OK button to confirm your choice.
▲
or
▼
button to select "Channel", then press the eNTeR/OK button.
▲
or
▼
button.
Even though you have changed the country setting in this menu, the country setting for DTV is not
changed. Use the Plug & Play function to change the country setting for DTV.
(Refer to page 9)
ꢁ. Press the
▲
or
▼
button to select "Auto Store", then press the eNTeR/OK button.
ꢄ. Press the eNTeR/OK button.
The TV will begin memorizing all of the available channels.
Press the eNTeR/OK button at any time to interrupt the memorization process and return to the
"Channel" menu.
ꢅ. After all the available channels are stored, the "Sort" menu appears.
english - 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Channels Manually
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the eNTeR/OK button.
2. Press the ▲ or ▼ button to select "Manual Store", then press the eNTeR/OK button.
ꢀ. Press the eNTeR/OK button to select "Programme".
ꢁ. To assign a programme number to a channel, find the correct number by pressing the ▲ or ▼
button and then press the eNTeR/OK button.
You can also set a programme number by pressing number buttons on the remote control.
ꢄ. Press the ▲ or ▼ button to select "Colour System", then press the eNTeR/OK button.
ꢅ. Select the colour standard required by pressing the ▲ or ▼ button then, press the eNTeR/OK button.
ꢂ. Press the ▲ or ▼ button to select "Sound System", then press the eNTeR/OK button.
ꢃ. Select the sound standard required by pressing the ▲ or ▼ button, then press the eNTeR/OK button.
If there is an abnormal sound or no sound, re-select the sound system required.
9. If you know the number of the channel to be stored, press the ▲ or ▼ button to select "Channel".
Press the eNTeR/OK button. Select C (Air channel) or S (Cable channel) by pressing the 5 or 6
button. Press the button to select channel.
Select the required number by pressing the ▲ or ▼ button and then press the eNTeR/OK button.
Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing number buttons on the remote control.
10. If you do not know the channel numbers, press the ▲ or ▼ button to select "Search".
Press the eNTeR/OK button. Search by pressing the ▲ or ▼ button and then press the eNTeR/OK button.
11. Press the ▲ or ▼ button to select "Store". Press the eNTeR/OK button to select "OK".
12. Repeat steps ꢀ to 11 for each channel to be stored.
Programme: Selects a program number for the channel.
Colour System: Sets the colour supporting system.
Sound System: Sets the sound supporting system.
Channel: Selects a channel.
Search: Scans for the frequency value for the channel.
Store: Saves your settings.
english - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Channel lists
Set the channels according to your preference.
Channel list
You can easily delete, add, or lock the channel you want.
P
1
Cꢀ
1 / 10
1. Press the MeNu button to display the menu.
Prog.
Press the
▲
or
▼
button to select "Channel", then press the
0
1
2
ꢀ
ꢁ
ꢄ
C--
eNTeR/OK button.
Cꢀ
2. Press the or
▲
▼
button to select "Channel Manager",
BBC 1
Cꢂꢁ
Cꢂꢄ
Cꢂꢅ
then press the eNTeR/OK button.
ꢀ. Press the eNTeR/OK button again, to select "Channel
List".
ꢅ
ꢂ
ꢃ
Sꢀ
Sꢁ
Sꢅ
ꢁ. Press the
►
▲
button to select " " line.
or button to select the undesired channel,
ꢄ. Press the
▼
then press the eNTeR/OK button to cancel.
ꢅ. Repeat steps 5 for each channel to be selected or canceled
ꢂ. Press the exIT button to exit.
9
Sꢂ
Add
lock
Move
Page
enter
Return
"
" is active when "Child Lock" is selected to "On".
You can select these options by simply pressing the Ch lIST
button on the remote control
Activating the Child lock
This feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by muting
out video and audio.
Child lock cannot be released using the buttons on the side.
Only the remote control can release the Child lock setting,
so keep the remote control away from children.
Channel Manager
Channel list
Child lock
TV
:
Off
On
1. Press the MeNu button to display the menu.
Press the
▲
or
▼
button to select "Channel", then press the
Move
enter
Return
eNTeR/OK button.
Channel liat
2. Press the or
▲
▼
button to select "Channel Manager",
then press the eNTeR/OK button.
ꢀ. Press the or button to select "Child Lock", then press
the eNTeR/OK button.
ꢁ. Press the or
eNTeR/OK button.
ꢄ. Press the or
P
2
Cꢁ
BBC1
1 / 10
▲
▼
Prog.
0
1
2
ꢀ
ꢁ
ꢄ
C--
▲
▼
button to select "On" or "Off". Press the
button to select "Channel List",
Cꢀ
BBC 1
Cꢂꢁ
Cꢂꢄ
Cꢂꢅ
▲
▼
then press the eNTeR/OK button.
ꢅ. Press the
►
▲
button to select " " line.
or button to select the channels you want to
ꢅ
ꢂ
ꢃ
Sꢀ
Sꢁ
Sꢅ
ꢂ. Press the
▼
lock, then press the eNTeR/OK button.
ꢃ. Repeat steps ꢂ for each channel to be locked or unlocked.
9. Press the exIT button to exit.
9
Sꢂ
Add
lock
Move
Page
enter
Return
Select "On" or "Off" in "Child Lock" to easily turn the channels
which selected on " " to be active or inactive.
english - 12
Download from Www.Somanuals.com. All Manuals Search And Download.
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
TV
Channel
Country
: Belgium
Modify the numeric order in which the channels have
been automatically stored.
Give easily remembered numbers to the channels
that you watch most often.
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
lNA
: Off
1. Press the MeNu button to display the menu. Press the
▲
or
▼
button to select "Channel", then press the eNTeR/OK button.
Move
enter
Return
2. Press the or button to select "Sort", then press the
eNTeR/OK button.
ꢀ. Select the channel number that you wish to change by press
▲
▼
TV
Sort
Prog.
Ch.
Name
ing the
button.
▲
or
▼
button repeatedly. Press the eNTeR/OK
0
1
2
ꢀ
ꢁ
C--
C2ꢀ
C1ꢅ
Cꢀ
S1
The selected channel number and name are moved to
right side.
ꢁ. Press the
▲
or
▼
button to move to the position in which you
Move
enter
Return
would like to change and then press the eNTeR/OK button.
The selected channel is exchanged with the one
previously stored to the chosen number.
ꢄ. Repeat steps ꢀ to ꢁ for another channel to be sorted.
ꢅ. Press the exIT button to exit.
Assigning Channels Names
TV
Channel
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed,
allowing you to assign new names.
Country
: Belgium
Auto Store
Manual Store
Channel Manager
Sort
1. Press the MeNu button to display the menu.
Name
Fine Tune
lNA
Press the
eNTeR/OK button.
▲
or
▼
button to select "Channel", then press the
button to select "Name", then press the
: Off
2. Press the or
eNTeR/OK button.
ꢀ. If necessary, select the channel to be assigned to a new
▲
▼
Move
enter
Return
TV
Name
Name
Prog.
Ch.
name by pressing the
button.
▲
or
▼
button. Press the eNTeR/OK
0
1
2
ꢀ
ꢁ
C--
C2ꢀ
C1ꢅ
Cꢀ
S1
-----
-----
-----
-----
-----
The selection bar is displayed around the name box.
ꢁ.
To...
Then...
Select a letter, number or symbol
Move on the next letter
Move back the previous letter
Confirm the name
Press the ▲ or ▼ button
Press the ► button
Press the ◄ button
Press the eNTeR/OK button
Move
enter
Return
The characters available are : Letters of the alphabet (A~Z) / Numbers (0~9) /
Special characters ( -, space)
ꢄ. Repeat steps ꢀ to ꢁ for each channel to be assigned to a new name.
ꢅ. Press the exIT button to exit.
english - 1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Fine Tuning Channel Reception
use fine tuning to manually adjust a particular channel for
TV
Channel
optimal reception.
Country
: Belgium
Auto Store
Manual Store
1. Use the number buttons to directly select the channel that
Channel Manager
Sort
you want to fine tune.
Name
Fine Tune
lNA
2. Press the MeNu button to display the menu.
: Off
Press the
▲
or
▼
button to select "Channel", then press the
eNTeR/OK button.
Move
enter
Return
ꢀ. Press the or
▲
▼
button to select "Fine Tune", then press
the eNTeR/OK button.
Fine Tune
ꢁ. Press the
◄
or
►
button to adjust the fine tuning.
Press the eNTeR/OK button.
P 1
ꢄ. Press the exIT button to exit.
0
Fine tuned channels that have been saved are marked with
an asterisk "*" on the right-hand side of the channel number
in the channel banner. And the channel number turns red.
Reset
Adjust
Save
Return
To reset the fine-tuning, select "Reset" by pressing the
▲
or
▼
button and then press the eNTeR/OK button.
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, the lNA function
can improve the reception (a low-noise preamplifier boosts
the incoming signal).
TV
Channel
Country
: Belgium
Auto Store
Manual Store
Channel Manager
Sort
1. Press the MeNu button to display the menu.
Name
Fine Tune
lNA
Press the
eNTeR/OK button.
▲
or
▼
button to select "Channel", then press the
button to select "LNA", then press the
button to select "On" or "Off".
: Off
2. Press the or
eNTeR/OK button.
ꢀ. Press the or
▲
▼
Move
enter
Return
▲
▼
Channel
: Belgium
Auto Store
Manual Store
Channel Manager
Sort
TV
Press the eNTeR/OK button.
Country
ꢁ. Press the exIT button to exit.
Name
Fine Tune
lNA
Off
On
:
Move
enter
Return
english - 1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Picture Standard
You can select the type of picture which best corresponds to
your viewing requirements.
TV
Picture
: Dynamic
Mode
Contrast
Brightness
Sharpness
Colour
100
ꢄ0
ꢂꢄ
ꢄꢄ
1. Press the MeNu button to display the menu.
Press the eNTeR/OK button, to select "Picture".
Tint
Gꢄ0
Rꢄ0
2. Press the eNTeR/OK button again, to select "Mode".
Colour Tone
Detailed Settings
Backlight
More
: Cool1
ꢀ. Press the
▲
or
▼
button to select the desired picture effect.
: 10
Press the eNTeR/OK button.
Move
enter
Return
ꢁ. Press the exIT button to exit.
TV
Picture
Mode
: Dynamic
Dynamic: Selects the picture for high-definition in a bright
Contrast
Brightness
Sharpness
Colour
Standard 00
room.
Movie 0
ꢂꢄ
ꢄꢄ
Standard: Selects the picture for optimum display in a
Tint
Colour Tone
Gꢄ0
: Cool1
Rꢄ0
normal environment.
Detailed Settings
Backlight
Movie: Selects the picture for comfortable display in a
: 10
More
dark room.
Move
enter
Return
The Picture mode must be adjusted separately for each input
source.
You can return to the factory defaults picture settings by
selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory
Defaults" on page 19)
You can also press the
P.MODe button on the remote
control to select one of the
picture settings.
Adjusting the Custom Picture
Your set has several settings which allow you to control
picture quality.
TV
Picture
: Dynamic
Mode
Contrast
Brightness
Sharpness
Colour
100
ꢄ0
ꢂꢄ
ꢄꢄ
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
Tint
Gꢄ0
Rꢄ0
Colour Tone
Detailed Settings
Backlight
More
: Cool1
2. Press the
▲
or
▼
button to select a particular item. Press the
button to decrease or increase the value of
eNTeR/OK button.
: 10
ꢀ. Press the or
◄
►
Move
enter
Return
a particular item. Press the eNTeR/OK button.
ꢁ. Press the exIT button to exit.
Contrast: Adjusts the lightness and darkness between objects and the background.
Brightness: Adjusts the brightness of the whole screen.
Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
Colour: Adjusts the colours, making them lighter or darker.
Tint (NTSC or DTV only): Adjusts the colour of objects, making them more red or green for a more
natural look.
The adjusted values are stored according to the selected Picture mode.
In PC Mode, Only "Contrast" and "Brightness" can be adjusted.
“Tint” function is available only in “HDMI” and “Component” mode.
english - 1ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Colour Tone
You can select the most comfortable colour tone to your
eyes.
TV
Picture
: Dynamic
Mode
Contrast
Brightness
Sharpness
Colour
100
ꢄ0
ꢂꢄ
ꢄꢄ
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 15)
Tint
Gꢄ0
Rꢄ0
Colour Tone
Detailed Settings
Backlight
More
: Cool1
2. Press the 5 or 6 button to select "Colour Tone", then press
: 10
the eNTeR/OK button.
ꢀ. Press the 5 or 6 button to select the desired colour tone
Move
enter
Return
setting. Press the eNTeR/OKbutton.
TV
Picture
: Dynamic
ꢁ. Press the exIT button to exit
Mode
Contrast
Brightness
Sharpness
Colour
100
ꢄ0
Cool2: Makes the colour temperature bluer than "Cool1"
menu.
ꢂꢄ
ꢄꢄ
ꢄ0
Tint
Gꢄ0
Cool 2
Cool1: Makes whites bluish.
Normal: Keeps whites white.
Warm1: Makes whites reddish.
Warm2: Makes the colour temperature redder than
"Warm1" menu.
Colour Tone
Detailed Settings
Backlight
More
:
Cool 1
Normal
Warm 1
Warm 2
:
enter
Move
Return
The adjusted values are stored according to the selected Picture mode.
When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected.
Activating Backlight
You can adjust the screen brightness by adjusting the lCD
TV
Picture
: Dynamic
backlight brightness. (0~10)
Mode
100
ꢄ0
ꢂꢄ
ꢄꢄ
Rꢄ0
Contrast
Brightness
Sharpness
Colour
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 15)
Tint
Gꢄ0
Colour Tone
Detailed Settings
Backlight
More
: Cool1
2. Press the ▲ or ▼ button to select “Backlight”, then press the
: 10
eNTeR/OK button.
ꢀ. Press the ◄ or ► button to decrease or increase the value of
Move
enter
Return
a particular item.
ꢁ. Press the eNTeR/OK button.
Backlight
10
Press the exIT button to exit.
Adjust
Return
english - 1ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring Detailed Settings on the Picture
You can set detailed picture settings.
TV
Picture
: Movie
Mode
1. Press the MENU button to display the menu.
Contrast
Brightness
Sharpness
Colour
100
50
75
55
2. Press the ENTER/OK button, to select "Picture".
Tint
G50
R50
3. Press the ▲ or ▼ button to select "Detailed Settings", then
Colour Tone
Detailed Settings
Backlight
sMore
: Cool1
press the ENTER/OK button.
: 10
4. Select the required option by pressing the ▲ or ▼ button,
then press the ENTER/OK button.
Move
Enter
Return
Available options: Adjust, Dynamic Contrast, Gamma,
White Balance, My Colour Control, Edge Enhancement,
Colour Space
TV
Detailed Settings
: Off
Adjust
Dynamic Contrast : Off
Gamma
: -3
White Balance
5. When you are satisfied with your setting, press the
My Colour Control
Edge Enhancement : Off
ENTER/OK button.
Colour Space
: Auto
6. Press the EXIT button to exit.
When the picture mode is set to Movie or Standard, Detailed
Settings can be selected.
Move
Enter
Return
If DNIe is Off, the Detailed Settings cannot be selected when
the Picture mode is in Standard mode.
Adjust: Off/Low/Medium/High
You can directly select the level on the screen to adjust the screen depth.
Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma: -3 ~ 3
You can adjust the middle brightness of pictures.
Press the ◄ or ► button until you reach the optimal setting.
White Balance: R Offset/G Offset/B Offset/R Gain/G Gain/B Gain/Reset
You can adjust the color temperature for more natural picture colors.
R Offset/G Offset/B Offset/R Gain/G Gain/B Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
My Colour Control: Pink/Green/Blue/White/Reset
This setting can be adjusted to suit your personal preferences.
Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted colours will be reset to the factory defaults.
Edge Enhancement: Off/On
You can emphasize object boundaries.
Colour Space: Auto/Wide
You can set the color reproduction space for the input signal to Auto or Wide.
English - 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Picture Size
You can select the picture size which best corresponds to
your viewing requirements.
TV
Picture
: Auto Wide
: 16 : 9
: Off
: Off
: Off
: Off
: OK
rMore
Size
Screen Mode
Digital NR
Active Colour
DNle
Movie Plus
Reset
1. Press the MENU button to display the menu.
Press the ENTER/OK button, to select "Picture".
2. Press the
▲
or
▼
button to select "Size", then press the
ENTER/OK button.
3. Select the required option by pressing the
▲
or
▼
button.
Move
Enter
Size
Return
Press the ENTER/OK button.
TV
4. Press the EXIT button to exit.
Auto Wide
16 : 9
Wide Zoom
Zoom
Auto Wide: Automatically adjusts the picture size to the "16:9"
aspect ratio.
4 : 3
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or
Just Scan
wide broadcasting.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction)
Move
Enter
Return
to fit the screen size.
4:3: This is the default setting for a video movie or normal
broadcasting.
Just Scan: Displays the input scenes as they are without any
cutoff when HDMI 720p,1080i signals are input.
"Auto Wide" function is available only in "TV", "Ext.1", "Ext.2",
"AV", and "S-Video" mode.
You can select these options
by simply pressing the P.SIZE
button on the remote control.
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Zoom : Select
by pressing the
or button to move the picture up and
, use the or button to
◄
or
►
buttons.
Use the
down. After selecting
▲
▼
▲
▼
magnify or reduce the picture size in the vertical direc-
tion.
Wide Zoom : Move the screen up/down using the
▲
or
▼
but-
tons after selecting the
by pressing the
►
or
ENTER/OK button.
English - 18
Download from Www.Somanuals.com. All Manuals Search And Download.
Freezing the Current Picture
Press the STILL button to freeze a moving picture into a
still one. Press again to cancel.
Selecting the Screen Mode
When setting the picture size to Auto Wide in a 16:9 wide TV,
you can determine the picture size you want to see the 4:3
WSS (Wide Screen Service) image or nothing. Each individual
European country requires different picture size so this func-
tion is intended for users to select it.
TV
Picture
: Auto Wide
: 16 : 9
: Off
: Off
: Off
: Off
: OK
rMore
Size
Screen Mode
Digital NR
Active Colour
DNle
Movie Plus
Reset
1. Press the MENU button to display the menu.
Press the ENTER/OK button, to select “Picture”.
Move
Enter
Return
2. Press the
▲
or
▼
button to select "Screen Mode", then press
the ENTER/OK button.
TV
Picture
rMore
Size
Screen Mode
Digital NR
Active Colur
DNle
Movie Plus
Reset
3. Select the required option by pressing the
▲
or
▼
button.
: Auto Wide
16:9
:
Press the ENTER/OK button.
Available options: 16:9, Wide Zoom, Zoom, 4:3
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnify the size of the picture vertically on screen.
4:3: Sets the picture to 4:3 normal mode.
Wide Zoom
:
Zoom
4:3
:
: O
: Off
: OK
Move
Enter
Return
4. Press the EXIT button to exit.
Picture Size is available in Auto Wide mode
This function is not available in PC or Component, HDMI
mode.
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
TV
Picture
rMore
Size
Screen Mode
Digital NR
Active Colour
DNle
Movie Plus
Reset
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3
on page 15.
: Auto Wide
: 16 : 9
: Off
: Off
: Off
2. Press the
▲
or
▼
button to select "Reset", then press the
: Off
ENTER/OK button.
: OK
3. Press the or
▲
▼
button to select "OK" or "Cancel".
Press the ENTER/OK button.
Move
Enter
Return
4. Press the EXIT button to exit.
TV
Picture
rMore
Size
The "Reset" will be set for each picture mode.
: Auto Wide
: 16 : 9
: Off
Screen Mode
Digital NR
Active Colour
DNle
Movie Plus
Reset
: Off
: Off
: Off
: OCancel
OK
Move
Enter
Return
English - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital NR / Active Colour / DNIe / Movie Plus
If the broadcast signal received by your TV is weak, you can
activate the Digital Noise Reduction feature to help reduce
any static and ghosting that may appear on the screen.
TV
Picture
: Auto Wide
: 16 : 9
: Off
: Off
: Off
: Off
: OK
rMore
Size
Screen Mode
Digital NR
Active Colour
DNle
Movie Plus
Reset
1. Press the MENU button to display the menu.
Press the ENTER/OK button, to select “Picture”.
2. Select the required option by pressing the ▲ or ▼ button,
then press the ENTER/OK button.
Available options: Digital NR, Active Colour, DNIe, Movie
Plus.
Move
Enter
Return
3. When you are satisfied with your setting, press the ENTER/OK button.
4. Press the EXIT button to exit.
Digital NR: Off/Low/Medium/High/Auto
If the signal received by the television is weak, you can activate this feature to reduce any static and
ghosting that may appear on the screen.
This function is not available in PC mode.
Active Colour: Off/On
If you turn on this option, the colors of the sky and grass will be stronger and clearer for a more
vivid on-screen picture.
This function is not available in PC mode.
This function is not available in Movie and Standard mode.
DNIe: Off/Demo/On
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you
can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the
applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function,
you can view the difference in the visual quality.
DNIeTM (Digital Natural Image engine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement, con-
trast enhancement and white enhancement. New image compensation Algorithm gives brighter,
clearer, more detailed image to you. DNIeTM technology will fit every signal into your eyes.
This function is not available in PC mode.
This function is not available in Movie mode
Movie Plus: Off/On
You can view more natural skin and clear text even in fast moving scenes.
Use this function when watching movies.
The Wide Zoom, Zoom and Just Scan mode is not supported.
This function is not available in PC mode.
English - 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the
picture of set programme or video input from any connected
equipment while watching the main picture.
Mode
: ustom
Setup
TV
More
energy Saving : Off
hDMI Black level: low
PIP
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
Move
Return
2. Press the
▲
or
▼
button to select "PIP", then press the
enter
eNTeR/OK button.
PIP
TV
ꢀ. Press the eNTeR/OK button again.
Press the or button to select "On", then press
eNTeR/OK button.
PIP
: On
: TV
Source
▲
▼
Size
:
:
Position
Programme
: P 1
If the PIP is activated, the size of the main picture turns
to "16:9".
ꢁ. Press the
▲
or
▼
button to select "Source",then press
Move
Return
eNTeR/OK button. Select a source of the sub picture by
pressing the
button.
enter
▲
or
▼
button and press the eNTeR/OK
The sub picture can serve different source selections
based on what the main picture is set to.
ꢄ. Press the
▲
or
▼
button to select "Size" of the sub picture
Press the PIP button on the
remote control repeatedly to acti-
vate or deactivate the "PIP".
and then press the eNTeR/OK button. Select a size of the
sub picture by pressing the
eNTeR/OK button.
▲
or
▼
button and then press the
If main picture is in "PC" and "Component" mode, "Size" is
not available.
ꢅ. Press the
▲
or
▼
button to select "Position", then press the eNTeR/OK button.
Select the position of the sub picture by pressing the
▲
or
▼
button and then press the
eNTeR/OK button.
ꢂ. Press the
▲
or
▼
button to select "Programme" and then press the eNTeR/OK button.
You can select the channel that you want to view through sub picture by pressing the
button. Press the eNTeR/OK button.
▲
or
▼
The "Programme" can be active when the sub picture is set to TV.
ꢃ. Press the exIT button to exit.
You may notice that the picture in the PIP window becomes slightly unnatural when you use the
main screen to view a game or karaoke.
Source: Used to select a source of the sub picture.
Size: Used to select a size of the sub picture.
Position: Used to move the sub picture.
Programme: Used to Change the sub picture.
PIP Settings
O: PIP operates, x: PIP doesn’t operate
Sub
TV analog
Ext.1
O
Ext.2
O
AV
O
S-Video Component HDMI
PC
X
TV digital
Main
Component
HDMI
PC
O
O
O
X
X
X
X
X
X
X
X
X
X
X
X
O
O
O
X
O
O
O
X
english - 21
Download from Www.Somanuals.com. All Manuals Search And Download.
hDMI Black level
Mode
: ustom
Setup
You can directly select the level on the screen to adjust the
screen depth.
TV
More
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
energy Saving : Off
hDMI Black level: low
PIP
2. Press the
▲
or
▼
button to select "HDMI Black Level", then
Move
Return
press the eNTeR/OK button.
enter
ꢀ. Press the ▲ or ▼ button to select "Normal" or "Low", then
Setup
press the eNTeR/OK button.
TV
More
ꢁ. Press the exIT button to exit.
energy Saving : Off
This Function is active only when the externel input connects
HDMI (RGB siginal).
Normal
hDMI Black level: l
low
PIP
Normal: The screen gets brighter.
low: The screen gets darker.
Move
Return
enter
Changing the Sound Standard
You can select the type of the special sound effect to be used
when watching a given broadcast.
TV
Sound
Mode
equalizer
: Custom
1. Press the MeNu button to display the menu.
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
: Off
: Off
: Off
: Main
Press the
▲
or
▼
button to select "Sound", then press the
eNTeR/OK button.
2. Press the eNTeR/OK button again, to select "Mode".
ꢀ. Select the required sound effect by pressing the or
▲
▼
Move
enter
Return
button repeatedly and then press the eNTeR/OK button.
TV
Sound
ꢁ. Press the exIT button to exit.
Mode
: Standard
Music
equalizer
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
Movie
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides live and full sound for movies.
Speech: Emphasizes voices over other sounds.
Custom: Selects your custom sound settings.
(Refer to "Adjusting the Sound Settings")
:
Speech
:
Custom
: Off
: Main
Move
enter
Return
english - 22
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal
preferences.
TV
Sound
Mode
: Custom
equalizer
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
eNTeR/OK button.
: Off
: Off
: Off
: Main
2. Press the ▲ or ▼ button to select "Equalizer", then press the
eNTeR/OK button.
Move
enter
Return
ꢀ. Press the ◄ or ► button to select a particular item.
TV
Press the eNTeR/OK button.
equalizer
ꢁ. Press the ▲ or ▼ button to reach the required setting.
Press the eNTeR/OK button.
ꢄ. Press the exIT button to exit.
If you make any changes to these settings, the Sound Mode
is automatically switched to "Custom".
Balance 100hz ꢀ00hz 1khz ꢀkhz 10khz
Move
Adjust
Return
Setting the TruSurround xT (SRS TS xT)
TV
Sound
TruSurround xT is a patented SRS technology that solves
the problem of playing ꢄ.1 multichannel content over two
speakers. TruSurround delivers a compelling,virtual surround
sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible
with all multichannel formats.
Mode
equalizer
: Custom
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
: Off
: Off
: Off
: Main
1. Press the MeNu button to display the menu.
Press the
▲
or
▼
button to select "Sound", then press the
Move
enter
Return
eNTeR/OK button.
TV
Sound
2. Press the ▲ or ▼ button to select "SRS TS XT", then press
Mode
: Custom
equalizer
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
the eNTeR/OK button.
: Off
On
: Off
ꢀ. Press the ▲ or ▼ button to select "On" or "Off". Press the
: Off
: Main
eNTeR/OK button.
ꢁ. Press the exIT button to exit.
TruSurround XT, SRS and
symbol are
Move
enter
Return
trademarks of SRS Labs, Inc. TruSurround XT
technology is incorporated under license from SRS
Labs, Inc.
You can also set these options
simply by pressing the SRS
button on remote control.
english - 2ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting headphones
You can connect a set of headphones to your set if you wish to
watch a TV programme without disturbing the other people in the
room.
When you insert the head set jack into the corresponding port, you
can operate only "SRS TS XT" and "Auto Volume" in Sound menu.
Prolonged use of headphones at a high volume may damage your
hearing.
You will not receive sound from the speakers when you connect headphones to the system.
The headphone volume and TV volume are adjusted differently.
Selecting the Sound Mode
You can set the sound mode by pressing the “DuAl” button.
When you press it, the current sound mode is displayed on the
screen.
Audio Type
Mono
DUAL 1/2
MONO
Default
Automatic
change
You can also set these options
simply by pressing the DuAl
button on remote control.
FM
Stereo
Dual
STEREO ↔ MONO
DUAL 1 ↔ DUAL 2
MONO
Stereo
DUAL 1
Mono
Automatic
change
NICAM
Stereo
Stereo
Dual
MONO ↔ STEREO
MONO ↔ DUAL 1
DUAL 2
DUAL 1
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
Adjusting the Volume Automatically
TV
each broadcasting station has its own signal conditions, and
so it is not easy for you to adjust the volume every time the
channel is changed. This feature allows you to automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
Sound
Mode
: Custom
equalizer
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
: Off
: Off
: Off
: Main
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
eNTeR/OK button.
Move
enter
Return
TV
Sound
2. Press the ▲ or ▼ button to select "Auto Volume", then press
Mode
: Custom
the eNTeR/OK button.
equalizer
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
: Off
:
:
: Main
ꢀ. Press the ▲ or ▼ button to select "On" or "Off". Press the
Off
On
eNTeR/OK button.
ꢁ. Press the exIT button to exit.
Move
enter
Return
english - 2ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Internal Mute
TV
If you want to hear the sound through separate speakers,
cancel the internal amplifier.
Sound
Mode
: Custom
equalizer
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
eNTeR/OK button.
: Off
: Off
: Off
: Main
2. Press the ▲ or ▼ button to select "Internal Mute", then press
the eNTeR/OK button.
Move
enter
Return
ꢀ. Press the ▲ or ▼ button to select "On" or "Off". Press the
TV
Sound
eNTeR/OK button.
Mode
: Custom
ꢁ. Press the exIT button to exit.
equalizer
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
: Off
: Off
:
:
When "Internal Mute" is set to "On", the Sound menus except
for "Sound Select" (in PIP mode) cannot be adjusted.
Off
On
Move
enter
Return
listening to the Sound of the Sub Picture
TV
Sound
During the PIP features activation, you can listen to the sound
of the sub picture.
Mode
: Custom
equalizer
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
: Off
: Off
: Off
: Main
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
eNTeR/OK button.
2. Press the ▲ or ▼ button to select "Sound Select", then press
the eNTeR/OK button.
Move
enter
Return
ꢀ. Press the ▲ or ▼ button to select "Sub".
TV
Sound
Press the eNTeR/OK button.
Mode
: Custom
ꢁ. Press the exIT button to exit.
equalizer
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
: Off
: Off
: Off
Main : Used to listen to the sound of the main picture.
Sub : Used to listen to the sound of the sub picture.
Main
Sub
:
You can select this option when the “PIP” is set to “On”.
Move
enter
Return
english - 2ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting the Sound Settings to the Factory Defaults
If Game Mode is On, the Reset Sound function is activated.
TV
Sound
Selecting the Reset function after setting the equalizer resets
the equalizer setting to the factory defaults.
Mode
: Custom
equalizer
SRS TS xT
Auto Volume
Internal Mute
Sound Select
Reset
: Off
: Off
: Off
: Main
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
eNTeR/OK button.
2. Press the ▲ or ▼ button to select "Reset", then press the
Move
enter
Return
eNTeR/OK button.
ꢀ. Press the exIT button to exit.
You can select this option when the "Game Mode" is set to "On".
Setting and Displaying the Current Time
Mode
: ustom
Setup
You can set the TV’s clock so that the current time is dis-
played when you press the INFO button. You must also set
the time if you wish to use the automatic On/Off timers.
TV
Plug & Play
language
:english
Time
Game Mode
:Off
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
Blue Screen
:Off
:Off
Melody
PC
home Theater PC :Off
light effect
:
Watching Mode On
More
2. Press the ▲ or ▼ button to select "Time", then press the
eNTeR/OK button.
Move
enter
Return
ꢀ. Press the eNTeR/OK button to select "Clock Set".
Clock Set
Day
TV
Month
p
Year
200ꢂ
ꢁ.
To...
Press the...
01
01
Move to Month, Day, Year, Hour or Minute
Set the Month, Day, Year, Hour or Minute
Press the eNTeR/OK button.
5
or
or
6
button.
button.
q
hour
Minute
00
00
Move
Adjust
Return
ꢄ. Press the exIT button to exit.
If you disconnect the power cord, you have to set the clock
again.
You can also set Year, Month, Day, Hour and Minute by pressing the number buttons on the
remote control.
english - 2ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Sleep Timer
You can select a time period of between ꢀ0 and 1ꢃ0 minutes
after which the television automatically switches to standby
mode.
oe
: uto
Setup
TV
Plug & Play
language
:english
Time
Game Mode
:Off
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
Blue Screen
:Off
:Off
Melody
PC
home Theater PC :Off
light effect
:
Watching Mode On
More
Move
2. Press the ▲ or ▼ button to select "Time", then press the
eNTeR/OK button.
enter
Return
TV
Time
ꢀ. Press the ▲ or ▼ button to select "Sleep Timer", then press
Clock Set
Sleep Timer
Timer 1
Timer 2
Timer ꢀ
:
:
:
:
:
Off
ꢀ0
ꢅ0
90
120
1ꢄ0
1ꢃ0
the eNTeR/OK button.
ꢁ. Press the ▲ or ▼ button repeatedly until the desired time
appears (Off, 30, 60, 90, 120, 150, 180).
Press the eNTeR/OK button.
ꢄ. Press the exIT button to exit.
The TV automatically switches to standby mode when the
timer reaches 0.
Move
enter
Return
Switching the Television On and Off Automatically
Mode
: Custom
Setup
1. Press the MeNu button to display the menu.
TV
Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
Plug & Play
language
:english
Time
Game Mode
:Off
2. Press the ▲ or ▼ button to select "Time", then press the
Blue Screen
:Off
:Off
Melody
eNTeR/OK button.
PC
home Theater PC :Off
ꢀ. Press the ▲ or ▼ button to select "Timer 1", "Timer 2",
light effect
:
Watching Mode On
More
Move
"Timer 3", then press the eNTeR/OK button.
enter
Return
ꢁ. Press the ▲ or ▼ buttons to adjust “Hour”, then press the ►
button to move to the next step.
Timer 1
TV
On Time
Set other items using the same method as above.
5
00
6
:
00
00
No
No
Yes/ No
Press the ▲or▼ button
Off Time
00
:
Volume
10
Repeat
Repeat
Volume
Select a Once, Everyday, Press the ▲or▼ button
Mon-Fri, Mon-Sat, Sat-
Sun
Once
Programme
01
►
Move
Adjust
Return
Adjust a 0~100
Press the ▲or▼ button
Press the ▲or▼ button
Programme Adjust a Programme
When finished, press the ReTuRN button to return.
• The current time will appear every time you press the INFO button.
• You can set the hour, minute, directly by pressing the number
buttons on the remote control.
ꢄ. Press the exIT button to exit.
english - 2ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing Your language
Setup
When you start using your set for the first time, you must
select the language which will be used for displaying menus
and indications.
TV
Plug & Play
language
:english
Time
Game Mode
:Off
1. Press the MeNu button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
Blue Screen
:Off
:Off
Melody
PC
home Theater PC :Off
light effect
:
Watching Mode On
More
Move
2. Press the ▲ or ▼ button to select "Language", then press
enter
Return
the eNTeR/OK button.
Mode
: ustom
Setup
TV
ꢀ. Select a particular language by pressing the ▲ or ▼ button
repeatedly.
Plug & Play
language
:
english
Time
Press the eNTeR/OK button.
Deutsch
Game Mode
:
Français
:
You can choose one of 17 languages.
Blue Screen
Italiano
:
Melody
español
ꢁ. Press the exIT button to exit.
PC
Nederlands
home Theater PC
light effect
:
q
:
Watching Mode On
More
Move
enter
Return
using Game Mode
When connecting to a game console such as PlayStationTM or
xboxTM, you can enjoy a more realistic gaming experience by
selecting game menu.
Setup
TV
Plug & Play
language
:english
Time
Game Mode
:Off
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
Blue Screen
:Off
:Off
Melody
PC
home Theater PC :Off
light effect
:
Watching Mode On
More
Move
2. Press the ▲ or ▼ button to select "Game Mode", then press
the eNTeR/OK button.
enter
Return
Setup
TV
ꢀ. Press the ▲ or ▼ button to select "On" or "Off". Press the
Plug & Play
language
eNTeR/OK button.
: english
Time
ꢁ. Press the exIT button to exit.
:
: Off
Game Mode
: Of
Off
On
Blue Screen
To disconnect the game console and connect another
external device, cancel game mode in the setup menu.
If you display the TV menu in Game mode, the screen
shakes slightly.
Game Mode is not available in TV mode.
If Game Mode is On:
Melody
PC
home Theater PC
light effect
: Off
:
Watching Mode On
Return
More
Move
enter
• Picture Mode changes to Standard and Sound Mode changes to Custom automatically.
The user cannot change these to other modes.
• Sound Mode in the Sound menu is deactivated. Adjust the sound using the equalizer.
• The Reset Sound function is activated. Selecting the Reset function after setting the equalizer
resets the equalizer setting to the factory defaults.
english - 2ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Blue Screen Mode / Selecting the Melody
Mode
: Custom
Blue Screen:
Setup
TV
If no signal is being received or the signal is very weak, a
blue screen automatically replaces the noisy picture back-
ground. If you wish to continue viewing the poor picture, you
must set the "Blue Screen" mode to "Off".
Plug & Play
language
: english
Time
Game Mode
: Off
: Of
:
Blue Screen
Off
On
Melody
PC
Melody:
home Theater PC
light effect
: Off
:
Watching Mode On
You can hear melody sound when the television is powered
on or off.
More
Move
enter
Return
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
e
Setup
TV
Plug & Play
language
: english
Time
Game Mode
: Off
2. Press the ▲ or ▼ button to select "Blue Screen" or "Melody".
Blue Screen
: Off
:
Melody
Press the eNTeR/OK button.
Off
low
PC
home Theater PC
light effect
:
WatcMhinegdMioudme On
ꢀ. When you are satisfied with your setting,
:
high
press the eNTeR/OK button.
More
Blue Screen: Off/On
Melody: Off/Low/Medium/High
Move
enter
Return
ꢁ. Press the exIT button to exit.
Setting the home Theater PC
You can view higher quality pictures by configuring the
screen settings in PC Mode.
If you set the home Theater PC function to On, you can
configure the Detail Settings (when Picture Mode is
set to Standard or Movie) as in PC Mode.
e
Setup
TV
Plug & Play
language
:english
Time
Game Mode
:Off
Blue Screen
:Off
:Off
Melody
PC
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
home Theater PC :Off
light effect
:
Watching Mode On
More
Move
enter
Return
2. Press the ▲ or ▼ button to select "Home Theater PC".
Setup
TV
Press the eNTeR/OK button.
Plug & Play
language
: english
Time
ꢀ. Press the ▲ or ▼ button to select "Off" or "On".
Game Mode
: Off
Press the eNTeR/OK button.
Blue Screen
: Off
: Off
Melody
ꢁ. Press the exIT button to exit.
PC
home Theater PC
light effect
: Off
This function is available only in PC mode.
:
On
ai
More
Move
enter
Return
english - 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the light effect
You can turn on/off the blue leD on the front of TV according
to the situation. use it for saving power or when the leD
dazzles your eyes.
e
Setup
TV
Plug & Play
language
:english
Time
Game Mode
:Off
1. Press the MeNu button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
Blue Screen
:Off
:Off
Melody
PC
home Theater PC :Off
light effect
:
Watching Mode On
2. Press the ▲ or ▼ button to select "Light Effect", then press
More
the eNTeR/OK button.
Move
enter
Return
ꢀ. Select the required option (Off, Standby Mode On,
Watching Mode On, On) by pressing the ▲ or ▼ button.
Press the eNTeR/OK button.
Mode
: Custom
Setup
TV
Plug & Play
language
:english
Time
Game Mode
:Off
Blue Screen
:Off
:Off
Off: LED will not come on.
Melody
Standby Mode On: Turns the LED on in standby mode.
Watching Mode On: Turns the LED on while watching
TV.
PC
Off
Standby Mode On
home Theater PC :
light effect
More
:
a
tc in
g
o
d
e
n
Wh MO
On
On: LED will come on after you turn the TV off.
Move
enter
Return
ꢁ. Press the exIT button to exit.
[LE23R86, LE26R86, LE23R88,LE26R88]
using the energy Saving Feature
This function adjusts the brightness of the TV so as to reduce
power consumption. When you watching TV at night, set the
"energy Saving " mode option to "high" so as to reduce the
dazzling of your eyes as well as the power consumption.
oe
: uto
Setup
TV
More
energy Saving :Off
hDMI Black level :low
PIP
1. Press the MeNu button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
Move
Return
2. Press the ▲ or ▼ button to select "Energy Saving", then
enter
press the eNTeR/OK button.
Setup
TV
ꢀ. Select the required option (Off, Low, Medium, High, Auto) by
More
pressing the ▲ or ▼ button. Press the eNTeR/OK button.
energy Saving :
hDMI Black level :
Off
low
4. Press the exIT button to exit.
PIP
Medium
high
Auto
Move
enter
Return
english - ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Source
Input
You can select among external sources connected to your
TV’s input jacks.
TV
Source list
edit Name
: TV
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the
eNTeR/OK button.
2. Press the eNTeR/OK button again, to select "Source List".
When no external device is connected to your
set, only "TV", "Ext.1", "Ext.2" are activated in the
"Source List". "AV", "S-Video", "Component", "PC",
"HDMI1", "HDMI2", "DTV" are activated only
when they are connected to your set.
Move
Return
enter
oe
: uto
Source list
TV
TV
: ----
ext.1
: ----
ext.2
ꢀ. Select the required device by pressing the ▲ or ▼ button.
Press the eNTeR/OK button.
AV
: ----
S-Video
: ----
: ----
: ----
: ----
: ----
Component
PC
hDMI1
hDMI2
DTV
: ----
Return
Move
enter
Press the SOuRCe button on the remote control to toggel
between all the available source.
TV mode can be selected by pressing the TV/DTV button,
number buttons(0~9), and the
P
/
button on the remote control. But it cannot be selected
using the SOuRCe button.
editing the Input Source Names
Mode
: ustom
Name the device connected to the input jacks to make your
input source selection easier.
Input
TV
Source list
edit Name
: TV
1. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the
eNTeR/OK button.
2. Press the ▲ or ▼ button to select "Edit Name", then press
Move
Return
the eNTeR/OK button.
enter
ꢀ. Press the ▲ or ▼ button to select the device that you wish to
edit.
Press the eNTeR/OK button.
ꢁ. Press the ▲ or ▼ button to select the required device.
Press the eNTeR/OK button.
Mode
: Custom
edit Name
TV
ext.1
:
:
----
ext.2
VCR
DVD
AV
:
S-Video
:
D-VhS
Component
:
Cable STB
:
hD STB
PC
hDMI1
hDMI2
:
ꢄ. Press the exIT button to exit.
Satellite STB
:
q
Move
Return
enter
english - ꢀ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Previewing the DTV Menu System
Guide
The company does not guarantee the normal
operation of the DTV menu for countries other
than the 6 supported countries (United Kingdom,
Germany, France, Italy, Spain, Austria) because
only these country standards are supported. In
addition, when the country of the broadcast stream
differs from the country selected by the current user,
the string appearing in the channel banner, Info,
Guide, Channel Manager, etc. may not be displayed
properly.
Now & Next Guide
: Full Guide
Full Guide
Scheduled List
Default Guide
Move
Enter
Exit
Channel
Auto Store
Manual Store
Edit Favourite Channels
Channel List
Available in DTV mode. Preset to the DTV mode
by using the TV/DTV button on your remote
control. To help you navigate around the on-
screen menu system and adjust the various
settings available, refer to the following illustration.
Move
Enter
Exit
Press the D.MENU button.
Guide
Setup
Menu Transparency : Medium
Parental Lock
Now & Next Guide
Full Guide
Scheduled List
Default Guide
Subtitle
: On
Subtitle Mode
Audio Format
: Normal
: PCM
Now/Next, Full Guide
Channel
Move
Exit
Auto Store
Enter
Manual Store
Edit Favourite Channels
Channel List
Language
Audio Language
Subtitle Language
Teletext Language
Preference
Setup
Menu Transparency
Parental Lock
Subtitle
Subtitle Mode
Audio Format
Digital Text
High, Medium, Low, Opaque
Enter PIN
Off, On
Normal, Hard of hearing
PCM, Dolby Digital
Disable, Enable
Move
Enter
Exit
Time Zone
System
Product Information
Signal Information
Software Upgrade
Common Interface
Reset
You can select these options
by simply pressing the
D.MENU button on the
remote control.
Language
Audio Language
Subtitle Language
Teletext Language
Preference
Primary Audio Language
Secondary Audio Language
Primary Subtitle Language
Secondary Subtitle Language
Primary Teletext Language
Secondary Teletext Language
The sub-items of the CI Menu may vary depending on
the CAM model.
English - 32
Download from Www.Somanuals.com. All Manuals Search And Download.
updating the Channel list Automatically
Mode
: Custom
ꢀꢄ%
You can update the channel list when the broadcaster
adds new Services or if you move the TV to a new
location.
Auto Store
Scanning for digital services...
1. Press the D.MeNu button to display the DTV menu.
Services found: 2ꢁ Channel: ꢀꢃ
2. Press the ▲ or ▼ button to select "Channel", then press
the eNTeR/OK button.
Stop
Return
ꢀ. Press the eNTeR/OK button again, to select "Auto Store".
Press the eNTeR/OK button.
ꢁ. When it has finished, the number of scanned services will
be displayed.
The existing favourite channel list will not be deleted when the channel list is updated.
To stop the scan before it has finished, press the eNTeR/OK button with "STOP" selected.
ꢄ. Press the exIT button to exit.
If the signal status is poor, the "No Service found! Check the aerial connection" message is
displayed.
updating the Channel list Manually
You can specify the channel for a fast channel search.
Manual Store
1. Press the D.MeNu button to display the DTV menu.
Channel
Frequency
ꢁꢂꢁ000
Bandwidth
Mhz
▲
2. Press the ▲ or ▼ button to select "Channel", then press
Khz
ꢃ
65
the eNTeR/OK button.
▼
ꢀ. Press the ▲ or ▼ button to select "Manual Store", then
press the eNTeR/OK button.
Search
Adjust
Return
ꢁ. Press the ▲ or ▼ button to select "Channel", then press
the eNTeR/OK button.
• Channel: Channel "5" to "69" in sequence are displayed (depending on the country)
• Frequency: The frequency available in the Channel group is displayed.
• Bandwidth: The available bandwidths are 7 and 8 MHz.
ꢄ. When it has finished, the number of scanned services will be displayed.
ꢅ. Press the exIT button to exit.
english - ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
editing Your Favourite Channels
You can edit your favourite channels using the four colour
buttons.
edit Favourite Channels
(no Channels)
1. Press the D.MeNu button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Channel", then press the
eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "Edit Favourite Channels",
then press the eNTeR/OK button.
Add Channels
Return
ꢁ. Press the red button to display all currently stored channels.
ꢄ. Press the ▲ or ▼ button to select a channel you want.
Press the eNTeR/OK button.
A " " icon is shown next to the selected channel and the
channel will be added to the favourite channel list.
edit Favourite Channels
•
•
•
•
To undo, press the eNTeR/OK button again.
Select All: Select all channels currently displayed.
Select None: Deselect all selected channels.
Preview: Displays (a) currently selected channel(s).
5
2
ꢄ
ꢂ
1ꢄ
1ꢅ
BBC TWO
Five
BBC ThRee
abc1
The Favorite Channels settings have been completed.
QVC
6
ꢅ. Press the exIT button to exit.
Preview
Select All
Select None
Move
Select
Return
Add
You can use this function when one or more favourite
channels have been selected.
edit Favourite Channels
2
BBC TWO
BBC ThRee
abc1
★
★
★
1. Press the D.MeNu button to display the DTV menu.
ꢂ
2. Press the ▲ or ▼ button to select "Channel", then press the
1ꢄ
eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "Edit Favourite Channels",
Move
Delete
then press the eNTeR/OK button.
Add
Prewiew
Move
Return
ꢁ. Press the red button in the "Edit Favourite Channels" menu.
To add more channels, refer to the step 5 on the previous
description.
ꢄ.
If you want to check the channel to be stored, press D.MeNu
button.
edit Favourite Channels
Press the exIT button to exit.
5
2
ꢄ
• To add all channels to the favourite channel list, press the
red button.
• To remove all channels, press the green button.
• Preview : Displays (a) currently selected channel(s).
• Press the Ch lIST button to display the favourite channel
manager.
BBC TWO
Five
BBC ThRee
abc1
★
ꢂ
★
★
1ꢄ
1ꢅ
6
QVC
Select All
Select None
Preview
Move
Select
Return
english - ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Move
edit Favourite Channels
1. Press the D.MeNu button to display the DTV menu.
2
BBC TWO
BBC ThRee
abc1
★
★
★
2. Press the ▲ or ▼ button to select "Channel", then press the
ꢂ
eNTeR/OK button.
1ꢄ
ꢀ. Press the ▲ or ▼ button to select "Edit Favourite Channels",
then press the eNTeR/OK button.
Move
Delete
Return
Add
Prewiew
ꢁ. Select the required channel using the 5 or 6 button.
Move
Select
ꢄ. Press the green button.
A " " icon is displayed on the left side of the channel
name.
ꢅ. Press the ▲ or ▼ button to select the channel that you want
to move, and press the green or eNTeR/OK button.
ꢂ. Press the exIT button to exit.
edit Favourite Channels
Preview
2
BBC TWO
BBC ThRee
abc1
★
★
★
1. In the "Edit Favourite Channels" menu,
select the channel to be previewed by pressing the ▲ or ▼
button.
ꢂ
1ꢄ
2. Press the yellow button.
The selected channel is displayed on the screen.
Prewiew
Delete
Add
Move
Move
Return
Delete
edit Favourite Channels
1. In the "Edit Favourite Channels" menu, select the channel to
be deleted from the favourite channels list by pressing the
▲ or ▼ button.
2
ꢂ
BBC TWO
★
★
BBC ThRee
2. Press the blue button.
The selected channel and number will be deleted.
To add a deleted channel back in to the favourite channel
list, see "Add" on page 34.
Move
Delete
Add
Prewiew
Move
Return
english - ꢀꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Channel list
You can exclude the channels you have chosen from the
channels you have scanned.When you scan through the
stored channels, those you have chosen to skip are not
displayed. All channels that you do not specifically choose to
skip are displayed during scanning.
Channel list
All Channels
1/2
Test Card M' v2.0
1
ꢀ
ꢁ
ꢄ
ꢅ
Test Card M'
Vida00ꢀb
Vida00ꢁb
vida00ꢄb
vida00ꢅb
2ꢀ bid-up.tv
2ꢄ TCM
ꢅ0 Television x
ꢂ0 BBC Radio 1
ꢂ2 BBC Radio 2
ꢂꢀ BBC Radio ꢀ
ꢂꢁ BBC Radio ꢁ
ꢃꢁ heat
2ꢅ uKTV Style
2ꢂ Discovery
2ꢃ Discoveryh&l
1ꢄ Cartoon Nwk
ꢀꢀ Boomerang
1ꢄ Ch 1ꢄ
1ꢅ QVC
91 MOJO
1. Press the D.MeNu button to display the DTV menu.
1ꢂ uKTV Gold
ꢄꢄ Ttext holidays
ꢃ00 ARD-MhP-Data
6
More
2. Press the ▲ or ▼ button to select "Channel", then press the
Previous Page
Move
NextPage
Favourites
TV
eNTeR/OK button.
Watch
Return
ꢀ. Press the ▲ or ▼ button to select "Channel List".
Press the eNTeR/OK button.
ꢁ. Press the ▲ or ▼ button to select "All", "Favourites" or "Default".
Press the eNTeR/OK button.
ꢄ. Press the yellow button to toggle between your favourite channels and all channels.
Your favourite channels are only displayed if they were previously set in the "Editing Your
Favourite Channels" menu (refer to page 34).
ꢅ. Press the red or green button to display the previous or next channel List page.
ꢂ. Press the ▲ or ▼ button to select a channel to be tuned.
Press the eNTeR/OK button.
The channel number, name and an icon are displayed in the top left corner while changing the
channel. The channel number and name are displayed if the channel is one of the all channels,
and a icon if the channel is one of the favourite channels.
ꢃ. Press the blue button to toggle between your TV, Radio, Data/Other and All.
9. Press the Ch lIST button to exit from the channel List.
Displaying Programme Information
While viewing a channel, additional information about the
current programme may be displayed.
1. While viewing a programme, press the INFO button.
The programme information is displayed.
1ꢁ:ꢀ0 Sat 1 Sep
2. To exit from banner information, press the INFO button.
AII Channels
A
1 AFDO,1ꢅ:9
AFDO 1ꢅ:9
No Block
SD
1ꢁ:ꢀ0~1ꢁ:ꢀꢀ
Contains video with AFD O; coded frame
is 1ꢅ:9
Stereo
Subtitle
english
exit
english - ꢀꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the ePG (electronic Programme Guide) Information
Now & Next Guide
The ePG (electronic Programme Guide) information is
13:28 Wed 16 Feb
provided by the broadcasters. Programme entries may
appear blank or out of date as a result of the information
Extreme Machines: Armoured Cars
INFO
Information
broadcast on a given channel. The display will dynamically
Now
Next
update as soon as new information becomes available.
Now & Next Guide
For the six channels indicated in the left-hand column,
displays the Current programme and the Next programme
information.
Watch
Full Guide
Favourites
Exit
Full Guide
13:28 Wed 16 Feb
Full Guide
Extreme Machines: Armoured Cars
Displays the programme information as time ordered One
hour segments. Two hours of programme information is
displayed which may be scrolled forwards or backwards in
time.
INFO
Information
Today
13:00
14:00
1. Press the D.MeNu button to display the DTV menu.
2. Press the eNTeR/OK button, to select "Guide".
Watch
Now/Next
Favourites
-24Hours
+24Hours
Exit
ꢀ. Press the ▲ or ▼ button to select "Now & Next Guide" or
"Full Guide".
Press the eNTeR/OK button.
You can also display the guide menu simply by pressing
the GuIDe button.
ꢁ.
To...
Then...
• Select a programme by pressing
the 5, 6, , button.
Watch a programme in the EPG list
• Press the eNTeR/OK button.
If the next program is selected, it is scheduled with the clock icon
displayed. If the eNTeR/OK button is pressed again, the scheduling is
canceled with the clock icon gone. For details about scheduling
programmes, refer to the next page.
• Select a programme of your choice by
pressing the 5, 6, , button.
View programme information
• Press the INFO button when the
programme of your choice is
highlighted.
Toggle between the "Now & Next
• Press the red button repeatedly.
Guide" or "Full Guide"
Display the "Favourites" and the "All
• Press the green button repeatedly.
Channels" list
Scrolls backwards quickly (24 hours).
Scrolls forward quickly (24 hours).
Exit the guide
• Press the yellow button repeatedly.
• Press the blue button repeatedly.
• Press the exIT button.
The programme title is on the upper part of the screen center. Please click on INFO button for
the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality
Information(HD/SD), Sound Modes, Subtitle or Teletext, Languages of Subtitle or Teletext, and
brief summary of the highlighted programme are included on the detailed information. "..." will be
appeared if the summary is long.
Six channels are displayed. To scroll between channels, move to a channel using the ▲ or ▼
button. To display page by page, use the P
or
button.
english - ꢀꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
using the Scheduled list
Scheduled list
(No programmes)
If you make a scheduled viewing list of programs you may
like to see, the channel will be automatically switched to the
scheduled program at the scheduled time even if you are
watching another program.
1. Press the D.MeNu button to display the DTV menu.
2. Press the eNTeR/OK button, to select "Guide".
Add Programme
ꢀ. Press the ▲ or ▼ button to select "Scheduled List", then
Return
press the eNTeR/OK button.
ꢁ. Press the red button.
The channel will be switched to the scheduled program.
ꢄ. Press the eNTeR/OK button to select an item and adjust with
the ◄ or ► button .
Scheduled list
Tuesday 22 Apr
ꢃ01 RaiTre
1ꢄ:ꢀ0 ~ 1ꢅ:00
Once
You can also set hour and minute by pressing the number
buttons on the remote control.
•
•
•
•
Channel: Set the channel.
Time: Set the time.
Date: Set Year, Month and Day.
Frequency: Set the frequency.
Add Programme
Edit
Delete
("Once", "Daily", or "Weekly")
Move
Return
ꢅ. After setting the schedule, Press the red button.
ꢂ. Press the exIT button to exit.
•
•
•
•
•
Save: Save the adjusted schedule.
Cancel: Cancel the adjusted schedule.
Add Programme: Add a new schedule.
edit: Re-adjust the selected schedule.
Delete: Delete the selected schedule.
Scheduled list
Channel
ꢃ02 Raiuno
Time
Date
1ꢄ : 20 to -- : --
Tue 22 Apr 200ꢂ
Once
Frequency
Save
Cancel
Adjust
Move
Return
Setting the Default Guide
You can preset the default guide style.
Guide
Now & Next Guide
Full Guide
Scheduled list
Default Guide
1. Press the D.MeNu button to display the DTV menu.
2. Press the eNTeR/OK button, to select "Guide".
: F
Now/Next
ꢀ. Press the ▲ or ▼ button to select "Default Guide", then press
Full Guide
the eNTeR/OK button.
ꢁ. Select "Now/Next" or "Full Guide" using the ▲ or ▼ button,
Move
enter
Return
and press the eNTeR/OK button.
ꢄ. Press the exIT button to exit.
You can select these options
by simply pressing the GuIDe
button on the remote control.
english - ꢀꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing All Channels and Favourite Channels
In the ePG menu, you can display all channels or favourite
channels.
1. Press the D.MeNu button to display the DTV menu.
2. Press the eNTeR/OK button again, to select "Guide".
ꢀ. Select the your required guide ("Now & Next Guide" or "Full
Now & Next Guide
13:28 Wed 16 Feb
Extreme Machines: Armoured Cars
INFO
Information
Guide") by pressing the ▲ or ▼ button.
Now
Next
ꢁ. Press the eNTeR/OK button.
ꢄ. Press the green button.
All the channel lists and the favorite channel lists will be
toggled.
Watch
Full Guide
Favourites
Exit
ꢅ. Select a programme of your choice by pressing the ▲, ▼,
◄, or ► button.
ꢂ. Press the INFO button to display information about the
highlighted programme.
Full Guide
ꢃ. When the Edit Favourite Channels list has not been set up:
13:28 Wed 16 Feb
•
"The favourites list is empty.
Extreme Machines: Armoured Cars
Would you like to choose your favourites now?" message is
displayed.
Select "Yes".
INFO
Information
The favourites list is empty.
Would you like to choose your
favourites now?
Today
:00
•
Yes
No
The "Edit Favourite Channels" menu is displayed.
If you select "No", all channels will remain unchanged.
• To edit the favourite channels, refer to page 34 for more
details.
Watch
Now/Next
Favourites
-24Hours
+24Hours
Exit
9 . Press the exIT button to exit.
"All Channels" is the list of channels that have been scanned by
the channel list update.
All channels are displayed in the all channel mode.
"Favourites" (favourite channels) is the list of channels that has
been set in the "Edit Favourite Channels" menu (refer to page 34).
english - ꢀ9
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Menu Translucency
Setup
You can set the translucency of the menu.
Menu Transparency :
high
Medium
:
1. Press the D.MeNu button to display the DTV menu.
Parental lock
Subtitle
Subtitle Mode
Audio Format
low
:
2. Press the ▲ or ▼ button to select "Setup", then press
Opaque
the eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "Menu Transparency"
then press the eNTeR/OK button.
ꢁ. Select the required option ("High", "Medium", "Low", or
"Opaque") by pressing the ▲ or ▼ button, and press the
eNTeR/OK button to change the setting.
Move
enter
Return
ꢄ. Press the exIT button to exit.
Setting up the Parental lock
This feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by a
ꢁ-digit PIN (Personal Identification Number) code that is
defined by the user. The on-screen menu will instruct you to
assign a PIN code (you can change it later, if necessary).
Setup
Menu Transparency : Medium
Parental lock
Subtitle
Subtitle Mode
Audio Format
: On
: Normal
1. Press the D.MeNu button to display the DTV menu.
Move
enter
Parental lock
Return
2. Press the 5 or 6 button to select "Setup", then press
the eNTeR/OK button.
ꢀ. Press the 5 or 6 button to select "Parental Lock.", then
press the eNTeR/OK button.
enter PIN
ꢁ.
The "Enter PIN" is displayed.
ꢄ. Enter your current 4-digit PIN code by using the numeric
buttons (0~9).
The options available in the "Parental Lock" group are
displayed with the "Parental Rating" selected.
The default PIN code for a new TV set is 0000.
If you enter an invalid PIN code,the "Invalid PIN code.
Please try again." message is displayed.
enter PIN
Return
Parental lock
▲
Parental Rating:
ꢅ. Press the eNTeR/OK button.
N
o Block
Change PIN
3
4
5
6
7
ꢂ. Press the 5 or 6 button to select the age rating you want to
lock out.
Press the eNTeR/OK button.
ꢃ. If you want to change the PIN code,select "Change PIN" by
pressing the 5 or 6 button. Press the eNTeR/OK button.
The "Enter New PIN" is displayed.
▼
Move
Return
enter
9. Enter your new PIN code by using the numeric buttons (0~9).
Change PIN
Confirm New PIN
The "Confirm New PIN" is displayed.
10. Re-enter your new PIN code to confirm by using the numeric
buttons (0~9).
The Your PIN code has been changed successfully
message is displayed.
Your PIN code has been changed successfully.
OK
11. Press the eNTeR/OK button.
12. Press the exIT button to exit.
enter PIN
Return
If you forget the PIN code, press the remote control buttons
in the following sequence, which resets the PIN to 0-0-0-0:
POWeR (Off), MuTe, ꢃ, 2, ꢁ, POWeR (On).
english - ꢁ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Subtitle
Setup
Menu Transparency : Medium
Parental lock
You can activate and deactivate the subtitles.
1. Press the D.MeNu button to display the DTV menu.
Subtitle
:
: N
On
2. Press the ▲ or ▼ button to select "Setup", then press the
Off
Subtitle Mode
Audio Format
eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "Subtitle ", then press the
eNTeR/OK button.
Move
Return
ꢁ. Select "On" by pressing the ▲ or ▼ button. Press the
enter
eNTeR/OK button.
ꢄ. Press the exIT button to exit.
Setting the Subtitle Mode
Setup
use this menu to set the Subtitle Mode. "Normal" under
the menu is the basic subtitle and "hard of hearing" is the
subtitle for a hearing-impaired person.
Menu Transparency : Medium
Parental lock
Subtitle
: On
Subtitle Mode
Audio Format
:
1. Press the D.MeNu button to display the DTV menu.
Normal
hard of hearing
2. Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
Move
Return
ꢀ. Press the ▲ or ▼ button to select "Subtitle Mode", then
enter
press the eNTeR/OK button.
ꢁ. Press the ▲ or ▼ button to select "Normal" or
"Hard of hearing". Press the eNTeR/OK button.
ꢄ. Press the exIT button to exit.
If the programme you are watching does not support the
"Hard of hearing" function, "Normal" automatically activates
even though "Hard of hearing" mode is selected.
Selecting the Audio Format
You can only hear Dolby Digital sound through the audio
receiver connected through an optical cable. You can only
hear PCM sound through the main speaker.
When sound is emitted from both the main speaker and the
audio receiver, a sound echo may occur due to the decoding
speed difference between the main speaker and the audio
receiver. In this case, use the internal mute function.
Setup
Menu Transparency : Medium
Parental lock
Subtitle
Subtitle Mode
Audio Format
: On
: Normal
: PCM
1. Press the D.MeNu button to display the DTV menu.
Move
enter
Return
2. Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "Audio Format", then press the eNTeR/OK button.
ꢁ. Press the ▲ or ▼ button to select "PCM" or "Dolby Digital". Press the eNTeR/OK button.
ꢄ. Press the exIT button to exit.
The Audio Format appears according to the broadcasting signal.
Dolby digital sound is only available when the TV is connected with an external speaker using an
optical cable.
english - ꢁ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Digital Text
If the programme is broadcast with digital text, this feature is
enabled.
Setup
Digital Text :
Disable
1. Press the D.MeNu button to display the DTV menu.
Time Zone
System
enable
2. Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "Digital Text", then press
the eNTeR/OK button.
Move
enter
Return
ꢁ. Press the ▲ or ▼ button to select "Disable" or
"Enable". Press the eNTeR/OK button.
ꢄ. Press the exIT button to exit.
MHEG(Multimedia and Hypermedia Information Coding Experts Group) An International standard
for data encoding systems used in multimedia and hypermedia. This is at a higher level than the
MPEG system which includes data-linking hypermedia such as still images, character service,
animation, graphic and video files as well as multimedia data. MHEG is user runtime interaction
technology and is being applied to various fields including VOD (Video-On-Demand), ITV
(Interactive TV), EC (Electronic Commerce), tele-education, tele-conferencing, digital libraries and
network games.
Selecting the Time Zone (Spain only)
Select the time zone where locate
Setup
1. Press the D.MeNu button.
Digital Text
2. Press the ▲ or ▼ button to select "Setup", then press the
Time Zone
System
eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "Time Zone", then press
the eNTeR/OK button.
ꢁ. Select the time zone where you locate by pressing the
▲ or ▼ button.
Move
enter
Return
Press the eNTeR/OK button.
Time Zone
The following options are available
The Iberian Peninsula and Balears Islands -
Canarian Islands
The Iberian Peninsula and Balears Islands
Canarian Islands
ꢄ. Press the exIT button to exit.
Adjust
enter
Return
Viewing Product Information
You can view your product information. For service or
repair, please contact a Samsung approved dealer.
Product Information
Software Version: T_BDxPDeu00_0ꢂ00
Firmware Version: T_STDeuꢂ_102c
1. Press the D.MeNu button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "System", then press
the eNTeR/OK button.
Return
ꢁ. Press the eNTeR/OK button again, to select "Product
Information".
The Product Information menu is selected.
- Software Version, Firmware Version
ꢄ. Press the exIT button to exit.
english - ꢁ2
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the Signal Information
You can get information about the signal status.
Signal Information
Service: ?
1. Press the D.MeNu button to display the DTV menu.
Service ID:0000
Multiplex: ? (TSID 0000, ONID 0000)
Network: ? (ID 0000)
2. Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
Bit error level:
10
0
ꢀ. Press the ▲ or ▼ button to select "System", then press the
Signal Strength:
eNTeR/OK button.
Return
ꢁ. Press the ▲ or ▼ button to select "Signal Information",
then press the eNTeR/OK button.
ꢄ. Press the exIT button to exit.
If the signal status is poor, the "No signal." message is
displayed.
upgrading the Software
To keep your product up-to-date with new Digital Television
features then software upgrades are periodically broadcast
as part of the normal Television signal.
It will automatically detect these signals and display the
software upgrade banner. You are given the option to install
the upgrade.
System
Product Information
Signal Information
Software upgrade
Common Interface
Reset
1. Press the D.MeNu button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Setup", then press the
Move
enter
Return
eNTeR/OK button.
Software upgrade
ꢀ. Press the ▲ or ▼ button to select "System", then press the
Software Information
Manual upgrade
eNTeR/OK button.
Standby Mode upgrade : On
ꢁ. Press the ▲ or ▼ button to select "Software Upgrade",
then press the eNTeR/OK button.
ꢄ. Press the ▲ or ▼ button to select "Software Infomation",
"Manual Upgrade" or "Satandby Mode upgrade".
Press the eNTeR/OK button.
Move
enter
Return
Software Inforamtion
Press the eNTeR/OK button, then the current software
version is shown. To display the software version
information, press the eNTeR/OK button again.
Software upgrade
Software Information
Manual upgrade
Standby Mode upgrade : On
Manual Upgrade
Press the eNTeR/OK button to search for new software
from the currently broadcasting channels.
Standby Mode Upgrade : On / Off
Press the eNTeR/OK button. To continue software
upgrade with master power on, Select On by pressing
the ▲ or ▼ button.
45 minutes after entering standby mode, a manual
upgrade is automatically conducted. Since the power
of the unit is turned on internally, the screen may be
on slightly for the LCD product. This phenomenon may
continue for more than 1 hour until the software upgrade
is completed.
Move
enter
Return
Software upgrade
Software Information
Manual upgrade
Standby Mode upgrade : On
ꢅ. Press the exIT button to exit.
Move
enter
Return
english - ꢁꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Common Interface
This contains information on CAM inserted in the CI slot and
displays it.
Application Info
Type : CA
Manufacturer : Channel Plus
Info : Top Up TV
1. Press the D.MENU button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
3. Press the ▲ or ▼ button to select "System", then press the
ENTER/OK button.
Return
4. Press the ▲ or ▼ button to select "Common Interface",
then press the ENTER/OK button.
5. Press the ENTER/OK button to display the information for
your application.
6. Press the EXIT button to exit.
The Application Info inserting is about the CI CARD.
You can install the CAM anytime whether the TV is ON or
OFF.
1.Purchase the CI CAM module by visiting your nearest dealer
or by phone.
2.Insert the CI CARD into the CAM in the direction of the
arrow until it fits.
3.Insert the CAM with the CI CARD installed into the common
interface slot.
(Insert the CAM in the direction of the arrow, right up to the end
so that it is parallel with the slot.)
4. Check if you can see a picture on a scrambled signal
channel.
Selecting the CI (Common Interface) Menu
CI Menu
This enables the user to select from the CAM-provided menu.
Main menu
Module information
1. Press the D.MENU button to display the DTV menu.
Smart card information
Language
2. Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
Software Download
3. Press the ▲ or ▼ button to select "System", then press the
Press OK to select, or Exit to quit
ENTER/OK button.
4. Press the ▲ or ▼ button to select "Common Interface",
Move
Enter
Exit
then press the ENTER/OK button.
5. Select to "CI Menu" by pressing the ▲ or ▼ button, and
press the ENTER/OK button.
6. Select the required option by pressing the ▲ or ▼ button,
and press the ENTER/OK button.
7. Press the EXIT button to exit.
Select the CI Menu based on the menu PC Card.
English - 44
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting
You can reset the values stored to the factory default
values.
Reset
enter PIN
The Reset operation deletes all channel information and
user preferences returningall values to their default factory
state.
1. Press the D.MeNu button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Setup", then press the
enter PIN
Return
Reset
eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "System", then press
WARNING: All channel settings and user
preferences will be lost and returned to
the factory defaults. It is recommended
that a reset is performed only when
serious problems are experienced.
the eNTeR/OK button.
ꢁ. Press the ▲ or ▼ button to select "Reset", then press the
eNTeR/OK button.
ꢄ. The "Enter PIN" screen will appear.
ꢅ. Enter your current 4-digit PIN code by using the numeric
buttons (0~9).
Return
The warning message is displayed.All values will be
reset by pressing the coloured buttons (red, green,
yellow, and blue)in turn.
ꢂ. Press the exIT button to exit.
Selecting the Preferred language (Audio, Subtitle or Teletext)
You can change the default value for subtitle, audio teletext
languages.
language
Audio language
Displays the language information for the incoming stream.
Subtitle language
Teletext language
1. Press the D.MeNu button to display the DTV menu.
Preference
2. Press the ▲ or ▼ button to select "Language", then press
the eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "Audio Language",
Move
enter
Return
" Subtitle Language" or "Teletext Language".
Press the eNTeR/OK button.
language
ꢁ. Select a particular language by pressing the ▲ or ▼ button
repeatedly.
Audio language
Subtitle language
Teletext language
Preference
Press the eNTeR/OK button.
English is the default in cases where the selected
language is unavailable in the broadcast.
ꢄ. Press the exIT button to exit.
While viewing a programme, the subtitle can be selected.
Move
enter
language
Return
While viewing a programme, audio languages can be
selected.
Audio language
Subtitle language
Teletext language
Preference
Move
enter
Return
english - ꢁꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Preference
This menu consists of ꢅ sub-menus:
language
Audio language
Primary Subtitle language, Secondary Subtitle language,
Primary Audio language, Secondary Audio language,
Primary Teletext language, and Secondary Teletext
language.
Subtitle language
Teletext language
Preference
Using this feature, users can select one of the languages
(English, German, Italian, Swedish, French, Welsh, Gaelic,
Irish, Danish, Finnish, Norwegian, Spanish, Czech, and Greek).
The language selected here is the default when the user selects
a channel.
Move
enter
Return
Press the ▲ or ▼ button to select required menu (Primary Subtitle Language, Secondary Subtitle
Language, Primary Audio Language, Secondary Audio Language, Primary Teletext Language, or
Secondary Teletext Language), then press the eNTeR/OK button. The options of the selected menu
are displayed.
Press the ▲ or ▼ button to select required option (English, German, Italian, Swedish, French,
Welsh, Gaelic, Irish, Danish, Finnish, Norwegian, Spanish, Czech, or Greek), then press the
eNTeR/OK button.
If you change the language setting, the Subtitle Language, Audio Language, and the Teletext
Language of the Language menu (refer to page 45) are automatically changed to the selected
language.
The Subtitle Language, Audio Language, and the Teletext Language of the Language menu
show a list of languages supported by the current channel and the selection is highlighted. If
you change this language setting, the new selection is only valid for the current channel. The
changed setting does not change the setting of the Primary Subtitle Language, Primary Audio
Language, or the Primary Teletext Language of the Preference menu.
Teletext Decoder
Most set channels carry " teletext ", pages of written
information that provide information such as:
Television programme times.
News bulletins and Weather forecasts.
Sports results.
Subtitles for the hard of hearing.
The teletext pages are organized according to six categories:
Contents
Part
A
B
C
D
Selected page number.
Broadcasting station identity.
Current page number or search status.
Date and time.
Text.
e
Status information.
F
english - ꢁꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying the Teletext Information
You can display teletext information at any time, but signal reception
must be good. Otherwise:
Information may be missing.
Some pages may not be displayed.
To activate the teletext mode and display the contents page:
1. Using the P
(
) or P
(
) button, select the channel providing
the teletext service.
2. Press the TexT/MIx (
) button to activate the teletext mode.
The contents page is displayed. It can be redisplayed at any time
by pressing the MeNu ( ) button.
ꢀ. Press the TexT/MIx (
) button again.
The actual broadcast will be displayed with "Teletext", "Double",
and "Mix" in order on the screen.
ꢁ. Press the TV/DTV button to exit from the Text display.
If any broken character appears while Text is being viewed, make
sure that the Text language is identical with the language in the
"Setup" menu mode. If both languages are different, select the
same language with the Text language on the "Setup" menu.
Selecting a Specific Teletext Page
Press the number buttons on the remote control to enter the
page number directly:
1. Enter the three-digit page number listed in the contents by pressing
the corresponding numeric buttons.
2. If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display
on a given page, press the PIP ( ) . Press the PIP ( ) button
again to resume.
ꢀ. Using the various display options:
To display...
Press the...
Both teletext information and the normal broadcast
Hidden text (answers to quiz games, for example)
The normal screen
TexT/MIx (
)
INFO (
)
)
INFO (
A secondary page, by entering its 4-digit number
PRe-Ch (
)
The next page
The previous page
P
P
(
(
)
)
Double-size letters in the:
Upper half of the screen
Lower half of the screen
P.SIZe
Once
Twice
(
)
Normal screen
Three times
english - ꢁꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
using Fastext to Select a Teletext Page
The various topics included in the teletext pages are colour-coded,
and can be selected by pressing the coloured buttons on the remote
control.
1. Display the teletext contents page by pressing the TexT/MIx (
)
button.
2. Press the coloured button corresponding to the topic that you wish to
select (The available topics are listed on the status information line).
ꢀ. Press the Red button to display the previous page.
Press the Green button to display the next page.
ꢁ. Press the TV/DTV button to exit from the Text display.
Setting up Your Remote Control
After it has been set up properly, your remote control can operate in five
different modes: TV, DVD, Cable, Set-Top Box, VCR. Pressing the cor-
responding button on the remote control allows you to switch between
these modes, and control whichever piece of equipment you choose.
The remote control might not be compatible with all DVD Players,
VCRs, Cable boxes, and Set-Top Boxes.
Setting up the Remote to Operate Your VCR, CABle, DVD and STB
1. Turn off your VCR, CABle, DVD and STB.
2. Press the VCR, CABle, DVD and STB button on your TV’s remote con-
trol.
ꢀ. Press the SeT button on your TV’s remote control.
ꢁ. Using the number buttons on your remote control, enter three digits of the
VCR code listed on pages 49~51 of this manual for your brand of VCR.
Make sure you enter three digits of the code, even if the first digit is a "0".
(If more than one code is listed, try the first one.)
ꢄ. Press the POWeR button on the remote control.
Your VCR should turn on if your remote is set up correctly.
If your VCR does not turn on after set up, repeat steps 2, 3, and 4, but try
one of the other codes listed for your brand of VCR.
If no other codes are listed, try each VCR code, 000 through 080.
english - ꢁꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Codes
VCR
Brand
Code
Brand
Code
SAMSUNG
ADMIRAL
AIWA
000 001 002 003 004 005 077 078 079
MONTGOMERY WARD
MTC
020
020
002 025
025
MULTITECH
NEC
002 005 025 038
007 008 018 026 037 062 064
020
AKAI
004 027 032
AUDIO DYNAMICS
BELL&HOWELL
BROKSONIC
CANDLE
007 026
OPTIMUS
ORION
018
073 074 075 076
021 056 071 072
019 041 075
008
022
PANASONIC
PENTAX
002 003 006 008 015 055
CANON
021 056
PENTEX
RESEARCH+
CITIZEN
002 003 006 008 015 055
PHILCO
021 056 059
COLORTYME
CRAIG
007
PHILIPS
021 080
002 024
PIONEER
PORTLAND
PROSCAN
QUARTZ
QUASAR
019 026 039 053
CURTIS MATHES
DAEWOO
DB
002 007 008 017 021 025 056 064 066
015 049 055
003 010 011 012 013 014 015 016
017
007 026
017
018
DIMENSIA
DYNATECH
ELECTROHOME
EMERSON
021 056
025
RADIO SHACK/
REALISTIC
006 018 020 021 024 025 029 034 048 056
034
001 003 006 021 022 025 030 032 034 040
047 050 052 060 063 065 066 067 069 073
RCA
002 017 019 021 035 041 043 057 068 076
SANSUI
026
FISHER
018 024 028 029 048 051 061
SANYO
018 024
FUNAI
025
SCOTT
003 047 052 067
GENERAL ELECTRIC
GO VIDEO
HARMAN KARDON
HITACHI
INSTANT REPLAY
JC PENNEY
JCL
002 005 017 021 056
SEARS
006 018 019 024 028 029 041 048 051
002
SHARP
020 034 045 015
007
SHIMTOM
SIGNATURE
SONY
027 033 038 058
019 025 041 042 074
025
021
027 033 044
002 007 018 019 021 026 037 041 054 056
SYLVANIA
SYMPHONIC
TANDY
021 025 056 059
007 008 018 021 026 037
025
JVC
081 082 083
018 025
KENWOOD
KLH
007 008 018 021 026 037
TASHIKA
TATUNG
006
070
037
KONIA
036
TEAC
025 037 068
LG(Goldstar)
LIOYD
006 007 008 009 010
TECHNICS
TEKNIKA
TMK
021
025
006 021 025 031
LOGIK
038
066
LXI
025
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
003 019 029 051 052
MAGNAVOX
MARANTZ
MARTA
021 056 059
002 006
007 008 018 021 026 037 062
002
006
007 026
MEI
021
026
MEMOREX
MGA
006 021 024 025
034
VIDEO CONCEPTS
VIDEOSONIC
WARDS
007 026
002
MIDLAND
MINOLTA
MITSUBISHI
005
002 003 006 019 020 021 024 025 034 038 041
007 008 018 026 037
019 041 075
019 034 041 046
YAMAHA
ZENITH
023 027 033
english - ꢁ9
Download from Www.Somanuals.com. All Manuals Search And Download.
CABle BOx
Brand
Code
Brand
Code
SAMSUNG
GI
000 001 002 003 004 005 006 007
REGENCY
SA
015 023
041
042 043
HAMLIN
HITACHI
JERROLD
MACOM
MAGNAVOX
OAK
003 024 031
025 030
SCIENTIFIC ATLAN
SPRUCER
STARGATE 2000
SYLVANIA
TEXSCAN
TOCOM
042 043
022
038 039
036
025 030
016
019 023 028
026
016
032
PANASONIC
PHILIPS
PIONEER
RCA
003 022 027 037 044
019 021 023 028
004 018 020 044
014 022 040
003
UNIVERSAL
VIEWSTAR
WAMER AMEX
ZENITH
033 034
019 021 023 028
046
017 029 035 037 045
REGAL
SAMSuNG DVD
Product
Code
Product
Code
DVD
000 001 002
Home Theater VCR COMBO
HDD Recorder COMBO
TWIN TRAY COMBO
STB DVD COMBO
DVD Receiver
014 015 016
DVDR
003 004
017
018
019
020
021
BD Record
VCR COMBO
VCR Record
DHR COMBO
005 006
007 008 009 010 011
012
013
AV Receiver
DVD
Brand
Code
Brand
Code
092
ANAM
030
INTEGRA
JBL
AUDIOVOX
AUDIOLOGIC
ANABA
075
091
085
JVC
022 033 115 116
072
JATON
KENWOOD
KISS
073
APEX DIGITAL
AIWA
070 071 074 086 083 084 088 111 112
051 108 109
073
114
BROKSONIC
BLAUPUNKT
B&K
062
KONKA
KLH
059 100 106 107
074 075
025 031
057
074
122 123
LG(Goldstar)
LOEWE
LASONIC
CURTIS MATHES
CYBER HOME
CLARION
CIRRUS
027
077 078 079 082
058
080 125
081
MOBILE
AUTHORITY
054
MEMOREX
MALATA
055
CYBER HOME
CINEVISION
DAEWOO
DENON
065
056
095
MAGNAVOX
MINTEK
076 093
074 094
073
066
146
MONYKA
NORCENT
NEXT BASE
NEC
FARENHEIT
FISHER
067 068
090
048 049 050
052
GPX
060
053
GO VIDEO
GE
061 089 133 135
069 074
074
NANTAUS
NESA
144
074
GREENHILL
HITACHI
OPTOMEDIA
ELECTRONICS
105
064 113
071
HITEKER
HOYO
OPTIVIEW
ONKYO
072
073
076 092 119
044 045
046 047
023
HARMAN / KARDON
IRT
091 110
089
PHILCO
PRINCETON
PROSCAN
english - ꢄ0
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
Brand
Code
Brand
Code
145
PANASONIC
PHILIPS
ROTEL
RIO
024 034 124 134 136 137 138
THOMSON
TOSHIBA
TECHNICS
TVIEW
036 076
028 062 076
139
117 118
120
072
RCA
023 035 074 075 131 132
TOKAI
073
RAITE
073
TEAC
096
ROWA
038
TECHWOOD
TREDEX
097
SAMPO
SONY
104
098 099 101
076
026 029 126 127 128 129 130 141
URBAN CONCEPTS
VENTURER
VOCOPRO
YAMAHA
YAMAKAWA
XWAVE
SHERWOOD
SVA
039 041
042
075
102
SYLVANIA
SHARP
SANSUI
SANYO
SHINSONIC
043 093
140
032 063
040 073
103
062
062 090
094
ZENITH
076 121
SAMSuNG SeT-TOP BOx
Product
Code
001 002
003
Product
Code
010
011
Ground wave STB
Satellite STB
Satellite STB HDD COMBO Premium
CABLE STB HDD COMBO Standard
CABLE STB HDD COMBO Premium
Ground wave STB HDD COMBO Standard
Ground wave STB HDD COMBO Premium
CABLE STB
004
012
013
014
STB DVD COMBO
Satellite STB HDD COMBO Standard
008
009
SeT-TOP BOx
Brand
Code
023
Brand
Code
ALPHASTAR
ANAM
MAGNAVOX
MEMOREX
MOTOROLA
MACOM
016 021 036 038 039 040 041 042
043
016
CHANNEL
MASTER
018 034
064
018
CROSSDIGITAL
CHAPARRAL
DIRECT TV
019
035
MITSUBISHI
NEXT LEVEL
PHILIPS
015
047 048 064
015 016 017 019 022 045 060 061 062
065 066 067 068
015 016 017 021 033 036 038 039 040
041 042 067
DAEWOO
074
PRIMESTAR
PANASONIC
PAYSAT
046 049 050 063
DISH NETWORK
SYSTEM
069 070
058 059 061 062
016
DISHPRO
DRAKE
069
PROSCAN
RCA
065 066
018 024 032
051 052 053 065 066
DX ANTENNA
ECHOSTAR
EXPRESSVU
GOI
027
RADIOSHACK
REALISTIC
STAR TRAK
STS
064
025 069 070 071
057
069
026
069
020 027
GE
065
SKY
031
GENERAL INSTRUMENT
HTS
046 047 048 063 064
SKY LIFE
SHACK
005 006 007
069
064
HOME CABLE
HITACHI
056
STAR CHOICE
SONY
064
022
054 060
HUGHES NETWORK
IQ
015 017
020
TOSHIBA
015 017 028 029 030 072
060 066
ULTIMATE TV
UNIDEN
ZENITH
IQ PRISM
020
016 021 037 055 056 057
024 031 068
JANEIL
059
JERROID
JVC
063
069 070
044 073
LG(Goldstar)
english - ꢄ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your PC Software (Based on Windows xP)
The Windows display-settings for a typical computer are shown below. The
actual screens on your PC may be different depending upon your particular
version of Windows and your particular video card. even if your actual
screens look different, the same, basic set-up information will apply in almost
all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1. First, click on "Control Panel" on the Windows start menu.
2. When the control panel window appears, click on "Appearance and Themes"
and a display dialog-box will appear.
ꢀ. When the control panel window appears, click on "Display" and a display dia-
log-box will appear.
ꢁ. Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution): Optimum- 1360 X 768
If a vertical-frequency option exists on your display settings dialog box, the correct value is
"60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The resolutions in the table are recommended. (All resolutions between the supported limits are
supported)
D-Sub Input
horizontal
Frequency (khz)
Vertical
Frequency (hz)
Pixel Clock
Frequency (Mhz)
Sync Polarity
Mode
IBM
Resolution
(h/V)
640×350
720×400
640×480
31.469
31.469
31.469
70.086
70.087
59.940
25.175
28.322
25.175
+/-
-/+
-/-
VeSA
640×480
640×480
640×480
800×600
800×600
800×600
800×600
1024×768
1024×768
1024×768
1024×768
1360×768
1152×864
37.861
37.500
43.269
37.879
48.077
46.875
53.674
48.363
56.476
68.677
60.023
47.712
53.783
72.809
75.000
85.008
60.317
72.188
75.000
85.061
60.004
70.069
84.997
75.029
60.015
59.959
31.500
31.500
36.000
40.000
50.000
49.500
56.250
65.000
75.000
94.500
78.750
85.800
81.750
-/-
-/-
-/-
+/+
+/+
+/+
+/+
-/-
-/-
+/+
+ /+
+/+
-/+
640×480
800×600
1024×768
35.000
43.750
57.672
70.000
70.000
72.000
28.560
45.500
78.434
-/+
-/+
-/-
VeSA GTF
hDMI/DVI Input
horizontal
Frequency (khz)
Vertical
Frequency (hz)
Pixel Clock
Frequency (Mhz)
Sync Polarity
Mode
Resolution
(h/V)
640×350
720×400
640×480
800×600
1024×768
31.469
31.469
31.469
37.879
48.364
70.086
70.087
59.940
60.317
60.000
25.175
28.322
25.175
40.000
65.000
+/-
-/+
-/-
+/+
-/-
IBM
VeSA
1360×768
47.712
60.015
85.800
+/+
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
english - ꢄ2
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the PC
Coarse and Fine Tuning of the Image (Image lock):
The purpose of picture quality adjustment is to remove or
reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (coarse) and Fine-tune
again.
After the noise has been reduced, re-adjust the picture so that
it is aligned on the center of screen.
Mode
Coarse
: Custom
ꢄ0
TV
Image lock
Fine
ꢄ0
Move
Return
1. Preset: Press the SOuRCe button to select PC mode.
enter
2. Press the MeNu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
eNTeR/OK button.
ꢀ. Press the ▲ or ▼ button to select "PC", then press the eNTeR/OK button.
ꢁ. Press the eNTeR/OK button to select "Image Lock".
ꢄ. Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the eNTeR/OK button.
ꢅ. Press the
◄
or
►
button to adjust the screen quality.
Press the eNTeR/OK button.
ꢂ. Press the exIT button to exit.
Changing the Image Position:
Adjust the PC’s screen positioning if it does not fit the TV
screen.
TV
Position
1. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)"
instructions number 1 to 3.
2. Press the ▲ or ▼ button to select "Position", then press the
eNTeR/OK button.
Move
enter
Return
ꢀ. Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the
◄
or
►
button to adjust the Horizontal-Position.
Press the eNTeR/OK button.
ꢁ. Press the exIT button to exit.
Adjusting the PC Screen Automatically (Auto Adjustment):
Auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal. The values of fine, coarse and
position are adjusted automatically.
PC
TV
Image lock
Position
Auto Adjustment
Image Reset
1. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)" instructions number 1 to 3.
2. Press the ▲ or ▼ button to select "Auto Adjustment", then
press the eNTeR/OK button.
Move
enter
Return
ꢀ. Press the exIT button to exit.
Initializing the Image Settings (Image Reset):
You can replace all image settings with the factory default
values.
PC
TV
Image lock
Position
Auto Adjustment
Image Reset
1. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)" instructions number 1 to 3.
2. Press the ▲ or ▼ button to select "Image Reset", then press
the eNTeR/OK button.
ꢀ. Press the exIT button to exit.
Move
enter
Return
english - ꢄꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
using the Anti-Theft Kensington lock
The Kensington lock is a device used to physically fix the system when using it in a public place.
The locking device has to be purchased separately. The appearance and locking method may dif-
fer from the illustration depending on the manufacturer. Please refer to the manual provided with
the Kensington lock for proper use.
1. Insert the locking device into
the Kensington slot on the
Cable
LCD TV (Figure 1), and turn it
in the locking direction
(Figure 2).
Figure 2
2. Connect the Kensington lock
Figure 1
cable.
ꢀ. Fix the Kensington lock to a
desk or a heavy stationary
object.
The place of the Kensington Lock may be
different depending on its model.
<Optional>
Troubleshooting: Before Contacting Service Personnel
No sound or picture
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the POWER
Check the picture contrast and brightness settings.
Check the volume.
buttons on the front of the set.
Normal picture but no
sound
Check the volume.
Check whether the MUTE
Check if "Internal Mute" is off
button has been pressed on the remote control.
No picture or and white
picture
Adjust the colour settings.
Check that the broadcast system selected is correct.
Sound and picture
interference
Try to identify the electrical appliance that is affecting the set and move it
further away.
Plug your set into a different mains socket.
Blurred or snowy picture,
distorted sound
Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
"Check signal cable."
message is displayed.
Check that the signal cable is firmly connected to the PC or video sources.
Check that the PC or video sources are turned on.
On PC mode, "Not Supported
Mode." message is displayed.
Check the maximum resolution and the frequency of the video adaptor.
Compare these values with the data in the Display Modes.
The TFT LCD panel uses a panel consisting of sub pixels (3,133,440) which require sophisticated tech-
nology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have
no impact on the performance of the product.
english - ꢄꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical and Environmental Specifications
Model Name
le2ꢀRꢃ
le2ꢅRꢃ
26 inch
23 inch
Screen Size (Diagonal)
Power Consumption
PC Resolution
100 W
120 W
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
Sound
3 W X 2
5 W X 2
Output
Dimension (WxDxh)
Body
586 x 79 x 406 mm
586 x 216 x 446 mm
666 x 75 x 461 mm
666 x 216 x 500 mm
With stand
Weight
8.1 kg
9.8 kg
With stand
environmental Considerations
Operating Temperature
Operating Humidity
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
Storage Temperature
Storage Humidity
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply, refer to the label attached to the product.
english - ꢄꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning! Important Safety Instructions
Please read the appropriate section that corresponds to the marking on your Samsung product before
attempting to install the product.
This symbol indicates that high voltage is
present inside.
It is dangerous to make any kind of contact
with any internal part of this product.
CAuTION
RISK OF eleCTRIC ShOCK DO NOT OPeN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). THERE ARE NO
USER SERVICEABLE PARTS INSIDE. REFER ALL SERVIC-
ING TO QUALIFIED PERSONNEL.
This symbol alerts you that important
literature concerning operation and mainte-
nance has been included with this product.
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation.
To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings
must never be blocked or covered.
- Do not cover the slots and openings with a cloth or other materials.
- Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
- Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper venti
lation is provided.
• Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.
• Do not place sources of heat on this apparatus, such as a candles, ash trays, incense or other similar items.
• Do not place a water containing vessel on this apparatus, as this can result in a risk of fire or electric shock.
• Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool etc.).
If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.
You can clean this apparatus with damp cloth when necessary, but be sure to unplug the apparatus first.
• Do not expose this apparatus to extreme temperature conditions or to extreme humidity conditions.
• This apparatus use batteries. In your community there might be regulations that require you to dispose of these
batteries properly under environmental considerations. Please contact your local authorities for disposal or
recycling information.
• To cut off the power source, unplug this apparatus from the wall outlet.
• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or
electric shock.
• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plug end, adaptors and the point where they exit
from the appliance.
• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the set due to lightning and power line surges.
• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC
adaptor correspondsto the local electrical supply.
• Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric
shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this
apparatus.
• Be sure to hold the plug, not the cord, when disconnecting this apparatus from an electric socket.
• Locate this apparatus near an easily accessible AC outlet.
• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming
from it
- unplug it immediately and contact an authorized dealer or service center.
• Unplug this apparatus from the AC outlet before any service.
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for
an extended period of time (especially when children, elderly or disabled people will be left alone in the
house).
- Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to
generate sparks and heat or the insulation to deteriorate.
• Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or
low temperatures, high humidity, chemical substances and where it operates for 24 hours such as the airport,
the train station etc. Failure to do so may cause serious damage to your set.
Download from Www.Somanuals.com. All Manuals Search And Download.
Wiring the Mains Power Supply Plug (uK Only)
IMPORTANT NOTICe
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is
indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating
must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse
cover is required, it must be of the same colour as the pin face of the plug. Replacement covers are available
from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a
power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative but to cut off the plug, remove the fuse and then safely dispose of the plug. Do
NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL BROWN - LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as
follows: The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE
or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured
BROWN or RED.
WARNING:
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE
LETTER E OR BY THE EARTH SYMBOL
, OR COLOURED GREEN OR GREEN AND YELLOW.
Warranty Card
uNITeD KINGDOM
This Samsung product is warranted for a period of twelve (12) months from the original date of purchase, against
defective materials and workmanship. In the event that warranty service is required, you should return the
product to the retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised
Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the
country concerned. In case of difficulty, details of our Authorised Service Centres are available from:
Samsung electronics u.K. ltd.
Customer Care Centre
PO Box 1ꢂ2ꢁꢀ
edinburgh, eh11 ꢁYB
united Kingdom
Tel: 0ꢃꢂ0 SAMSuNG (ꢂ2ꢅꢂꢃꢅꢁ)(uK & Northern Ireland)
Tel: 0ꢃ1ꢃ ꢂ1ꢂ 100 (Republic of Ireland Only)
Fax: +ꢁꢁ (0)ꢃꢂ0 ꢂ22112ꢂ
WARRANTY CONDITIONS
1. The warranty is only valid if, when warranty service is required, the warranty card is fully and properly
completed and is presented with the original invoice or sales slip or confirmation, and the serial number on
the product has not been defaced.
2. Samsung’s obligations are limited to the repair or, at its discretion, replacement of the product or the
defective part.
3. Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres.
No re-imbursement will be made for repairs carried out by non Samsung Dealers and, any such repair work
and damage to the products caused by such repair work will not be covered by this warranty.
4. This product is not considered to be defective in materials nor workmanship by reason that it requires
adaptation in order to conform to national or local technical or safety standards in force in any Country other
than the one for which the product was originally designed and manufactured.
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is intentionally
left blank.
Download from Www.Somanuals.com. All Manuals Search And Download.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at
the end of its working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to
promote the sustainable reuse of material resources. Household users should contact either the retailer where they pur-
chased this product, or their local government office, for details of where and how they can take this item for environmentally
safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Quatech Stereo Receiver 24GHz User Guide
Reebok Fitness Exercise Bike RBEX29010 User Guide
Ricoh Printer SP 4510DN User Guide
Roland Electronic Keyboard FXWS01 User Guide
Roland Musical Instrument SC 88 Pro User Guide
Russell Hobbs Blender HQ 282 User Guide
Samsung Camcorder HDR CX7E User Guide
SATO Printer CX208 212 User Guide
SECO LARM USA Home Security System 190 User Guide
Sencore Home Theater Server VP300 User Guide