1. Smart phone requirements
•
Confirm Password : Checks whether your password is
entered correctly.
Hardware / Operating System
Requirements
OS
- iOS 4.3.5/5.0/6.0/6.1
- 600MHz or higher
•
•
Name : Enter your name.
CPU
RAM
E-mail : Email address is used to recover your account
password.
- 128MB or more (recommended),
RAM : 50MB (Minimum)
`
For further details, please refer to the user’s manual.
M
- WiFi or 3G/LTE wireless communication-
enabled smart phone
Network
Video Codec
- H.264
3. Logging In
Recommended Smart Phones - iPhone 4/5
SmartCam
1. Enter your ID and password
created during the subscription
com or on the smartphone
application.
Recommended Tablet PC
- iPad 2/3
for iOS SNH-1011N
English
2. Subscription
1. Run the downloaded application.
•
Remember me :
Saves your account information
for later use.
Auto Login : If checked, logs
in automatically from the next
application running.
•
With SmartCam app, you can monitor what matters to you
directly from your smart phone.
Download the application from the App Store and install it on
your smart phone.
“Smartcam”, “SAMSUNG TECHWIN”, “TECHWIN”.
2. Tap <Login>.
Search keywords for the application: “Samsung SmartCam”,
`
If you forgot your ID or password, use Find ID/Password below the
M
<Login> tab.
2. Tap <Sign up here>.
3. Enter requested information.
4. Check “Agree to the terms
and conditions”, and tap
<Register>.
•
ID : Create user ID using
letters, numbers and periods
between 8-14 characters.
PW : Create password using
letters and numbers except
colons and commas between
8-14 characters.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Live Video
3. Press and hold the Mic icon and start talking. Press and
hold for 2sec after finished talking to properly send the
audio over the internet.
1. Tap the desired camera’s
Live Video
[
] or tap the <Live> icon.
4. Even if you did not activate the two-way audio function,
you can receive the audio sound of the video. In addition,
the microphone setting should be at least 1 or higher if you
want to use the two-way audio function.
f
`
When there are multiple users logged on to the camera, first person
J
who tap the Talk icon will have the control.
Condition
WiFi
Audio Support
2. Enter the <Camera password>
for the camera selected. This
is the same camera password
you created at the time you
registered the camera.
a
b
c
d
e
O
3G/LTE
Depending on your network.
Relay Mode
X
No.
Description
Check the <SAVE> option to
save the camera password.
Within 20 seconds, it will start
streaming.
Relay mode
Capture
You can capture and save a still image from the video.
Enables high quality video (640x480 resolution).
`
a
If the router where your camera is connected to does not have
the UPnP function or if the camera is connected to a dual
router, your mobile device will be connected to the 3G or LTE
network in a relay mode and you will see the video for the first
seven minutes only. In this case, set your mobile device to WiFi
network to achieve a normal connection.
HQ
b
Video and audio playback depends on the policies of
your service provider or the network connection status.
Flip
Flips the video image.
c
Brightness Adjusts the screen brightness.
d
e
`
Relay mode is added feature where the video from the camera is
transmitted to Samsung server then retransmitted to the user's
computer.
Two-way
Enable 2-way audio between the camera and the
J
`
The loading time may be longer depending on the policy of the
service provider or the network connection status.
Audio
phone.
M
Press and hold to talk. Let go to hear front from the
Mic
f
`
`
Audio is not supported in Relay Mode.
camera.
If the router’s UPnP is not set, then you might be connected in relay
mode. The settings may differ depending on the connected
Broadband Router model. For more information, refer to the user
manual of the applicable router.
Two-way Audio
`
samsungsmartcam.com", go to support page, and refer to
“Troubleshooting” on it.
1. Tap on the Two-way Audio icon.
2. The Mic icon will appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Event List
1. Tap on the <Event> icon to see
the YouTube and Picasa event
links.
YouTube icon:
2. Tap on the <Delete All> to clear
Tap on the YouTube
icon to play the YouTube
video.
the event list.
Picasa icon:
Tap on the Picasa icon
to see picture.
Audio
Detection icon
Motion Detection
Icon
Deleting Each Event
`
`
You will get a notification prompt
when event is detected by the
camera.
M
1. Slide you finger right to left on
the event you want to delete.
`
Phone does not allow you to play the private videos automatically.
To see the event videos on your phone, tap on the YouTube app and
sign into your account(same YouTube account used for the Camera).
While logged in to the YouTube, tap the YouTube icon to play the video
automatically.
M
While transmitting videos to
YouTube or Picasa for about 30
seconds, the device does not
detect Events.
Deleting All Events
1. Tap on the <Edit> then Tap on
the <Clear>.
2. If you want to check the event
list, go to the camera settings
and set up the reception of
2. Tap on <Delete> to delete the
event.
YouTube or Picasa alarms. If
event video is uploaded to your
YouTube or Picasa account, it will
be displayed in the event list.
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Camera Setup
Tap the <Setup> icon to configure a camera to be monitored.
3. Configure the notification.
Time setting
•
•
Push Notification : Notifies
alarm events.
1. Tap <Time setting>.
2. Set the camera’s clock.
YouTube : Creates 30 seconds
long footage and uploads onto
the user’s YouTube account.
•
•
Time Zone : Select your region.
Summer Time : Check this
option if you live in a country
or region where DST(Daylight
Saving Time) is applied.
•
Picasa : Sends event images
to the user’s Picasa account.
4. Tap <Apply>.
Network setting
1. Tap the <Network setting>.
9. Auto Login Setup
General setting
2. Configure the wireless network.
1. Move to the <Setup> item.
1. Tap <General setting>.
•
WiFi : Shows the list of
available access points.
2. Enable <Auto Login> to login
automatically from the next
application running.
2. Configure the basic camera
settings.
-
: Connecting to the AP
requires password.
•
Camera Name : Camera name
is used to easily identify the
camera when you have more
than one. i.e., Living room,
Kitchen, Bedroom.
-
: Connecting to the AP
requires no password.
- Show password : The
password entered by user
is displayed on the screen
when selecting encryption
Wifi.
•
Event Alarm : Specify whether
to trigger the alarm or not, and
specify the sensitivity.
The higher the sensitivity is, the
•
Other WiFi Networks : Enter
the SSID name and password
to connect to the network.
If selected, it shows guide
on SSID and networking
procedures.
subtler motion/audio events will be detected.
10. Info.
•
•
Night Vision : Set the IR lighting.
Enable <Night Vision> for the camera to switch
1. Move to the <Info.> item.
automatically to night vision mode.
2. Shows the information on
Samsung Techwin Smartcam
Application.
vX.XX
Audio : Adjust the volume of the built-in microphone and
speaker of the camera as appropriate.
XXXX.X.XX.
`
The camera LED will change from
M
flashing blue to solid green within
30 seconds. This confirms the
camera is connected to your WiFi
network. You can now unplug the
camera and place the camera anywhere within your wireless
network range. If the camera LED did not change to solid green,
please contact our tech support.
Download from Www.Somanuals.com. All Manuals Search And Download.
|