Samsung Digital Camera EC ST66ZZBPRUS User Guide

This user manual includes detailed usage  
instructions for your camera. Please read  
this manual thoroughly.  
Click a topic  
ST66/ST68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Health and safety information  
Do not touch the flash while it fires.  
Caution—situations that could cause damage to your camera  
or other equipment  
The flash is very hot when fired and may burn your skin.  
When you use the AC charger, turn off the camera before you  
disconnect the power to the AC charger.  
Remove the batteries from your camera when storing it for an  
extended period of time.  
Failing to do so may result in fire or electric shock.  
Installed batteries may leak or corrode over time and cause  
serious damage to your camera.  
Disconnect the charger from the wall socket when not in use.  
Failing to do so may result in fire or electric shock.  
Use only authentic, manufacturer-recommended, Lithium-ion  
replacement batteries. Do not damage or heat the battery.  
Do not use a damaged power supply cord, plug, or loose outlet  
when you charge batteries.  
Inauthentic, damaged, or heated batteries may cause a fire or  
personal injury.  
This may cause a fire or electric shock.  
Use only Samsung-approved batteries, chargers, cables and  
accessories.  
Do not allow the AC charger to come in contact with the +/-  
terminals on the battery.  
Using unauthorized batteries, chargers, cables or accessories  
can cause batteries to explode, damage your camera, or cause  
injury.  
This may cause a fire or electric shock.  
Samsung is not responsible for damage or injuries caused by  
unapproved batteries, chargers, cables or accessories.  
Do not force the camera’s parts or apply pressure to the  
camera.  
This may cause your camera to malfunction.  
Use the battery only for its intended purpose.  
Misusing the battery may cause a fire or electric shock.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Health and safety information  
Exercise caution when you connect cables or adapters and  
install batteries and memory cards.  
Check that the camera is operating properly before use.  
The manufacturer takes no responsibility for any loss of files or  
damage that may result from camera malfunction or improper use.  
If you force the connectors, improperly connect cables, or  
improperly install batteries and memory cards, you can damage  
ports, connectors, and accessories.  
You must plug the small end of the USB cable into your camera.  
If the cable is reversed, it may damage your files. The manufacturer  
is not responsible for any loss of data.  
Keep cards with magnetic strips away from the camera case.  
Information stored on the card may be damaged or erased.  
Never use a damaged charger, battery, or memory card.  
This may result in electric shock or camera malfunction or cause  
a fire.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Outline of the User Manual  
Copyright information  
Microsoft Windows and the Windows logo are  
registered trademarks of the Microsoft Corporation.  
Mac is a registered trademark of the Apple Corporation.  
microSD™ and microSDHC™ are registered  
trademarks of the SD Association.  
Trademarks and trade names used in this manual are  
the property of their respective owners.  
Camera specifications or contents of this manual may  
be changed without prior notice due to upgrade of  
camera functions.  
Use this camera responsibly and adhere to all laws  
and regulations concerning its use.  
You are not allowed to reuse or distribute any part of  
this manual without prior permission.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Indicators used in this manual  
Icons used in this manual  
Shooting mode  
Smart Auto  
Program  
Indicator  
S
Icon  
Function  
Additional information  
p
N
d
Safety warnings and precautions  
Live Panorama  
Picture in Picture  
Scene  
Camera buttons. For example, [Shutter] represents the  
shutter button.  
[ ]  
( )  
s
Page number of related information  
Movie  
v
The order of options or menus you must select to  
perform a step; for example: Select  
a
Photo Size  
(represents Select  
a, and then select Photo Size).  
Shooting mode icons  
*
Annotation  
These icons appear in the text when a function is available in a  
mode. See the example below.  
Note: The smode may not support functions for all scenes.  
For example:  
Available in Program  
and Movie modes  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Expressions used in this manual  
Pressing the shutter  
Exposure (Brightness)  
Half-press [Shutter]: press the shutter halfway down  
Press [Shutter]: press the shutter all the way down  
The amount of light that enters your camera determines the  
exposure. You can alter the exposure by changing the shutter  
speed, aperture value, or ISO sensitivity. By altering the exposure,  
your photos will be darker or lighter.  
Normal exposure  
Overexposure (too bright)  
S
S
Half-press [Shutter]  
Press [Shutter]  
Subject, background, and composition  
Subject: the main object in a scene, such as a person, animal,  
or still life  
Background: the objects around the subject  
Composition: the combination of a subject and background  
Background  
Composition  
Subject  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic troubleshooting  
Learn to solve common problems by setting shooting options.  
The subject’s eyes  
appear red.  
Red eye occurs when the subject's eyes reflect light from the camera flash.  
Set the flash option to  
Red-eye or  
Red-eye Fix. (p. 52)  
If the photo has already been captured, select  
Photos have dust  
spots.  
If dust particles are present in the air, you may capture them in photos when you use the flash.  
Turn off the flash or avoid capturing photos in a dusty place.  
Photos are blurred.  
Blurring can occur if you capture photos in low light conditions or hold the camera incorrectly.  
Use the DIS function or half-press [Shutter] to ensure the subject is focused. (p. 30)  
Photos are blurred  
when shooting at  
night.  
As the camera tries to let in more light, the shutter speed slows. This can make it difficult to hold the  
camera steady long enough to capture a clear photo and may result in camera shake.  
Select  
Night in  
s
Use a tripod to prevent your camera from shaking.  
Subjects come out  
When the light source is behind the subject or when there is a high contrast between light and dark areas,  
too dark because of the subject may appear too dark.  
backlighting.  
Avoid shooting toward the sun.  
Select Backlight in mode. (p. 39)  
s
Set the flash option to Fill in. (p. 52)  
Set the metering option to  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Quick reference  
Capturing photos of people  
Adjusting the exposure  
(brightness)  
ISO sensitivity (to adjust the sensitivity to light)  
Viewing files by category in Smart Album  
f
dmode  
f
Viewing files as thumbnails  
f
f
smode > Beauty Shot  
f
Deleting all files on the memory card  
78  
f
EV (to adjust exposure)  
f
smode > Intelligent Portrait  
f
Viewing files as a slide show  
f
ACB (to compensate for subjects against bright  
backgrounds) 64  
Red-eye/Red-eye Fix (to prevent or correct  
red-eye) 52  
Viewing files on a TV  
f
f
f
Connecting your camera to a computer  
Metering  
f
Face Detection  
f
f
AEB (to capture 3 photos of the same scene  
with different exposures) 68  
Self-Portrait  
f
Adjusting sound and volume  
f
f
Adjusting the brightness of the display  
f
Capturing photos at night or in  
the dark  
Capturing photos of scenery  
Changing the display language  
f
Setting the date and time  
f
smode > Night, Sunset, Dawn  
f
Nmode  
f
Before contacting a service center  
f
Flash options  
f
smode > Landscape  
f
ISO sensitivity (to adjust the sensitivity to light)  
f
Applying effects to photos  
Capturing action photos  
smode > Magic Frame  
f
smode > Funny Face  
f
Continuous, Motion Capture  
f
Smart Filter effects  
f
Image Adjust (to adjust Contrast, Sharpness, or  
Saturation) 71  
Capturing photos of text,  
insects, or flowers  
f
smode > Text  
f
Reducing camera shake  
Macro  
f
Digital Image Stabilization (DIS)  
f
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Contents  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Contents  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unpacking  
The following items are included in your product box.  
Optional accessories  
Camera  
AC adapter/USB cable  
Camera case  
A/V cable  
Rechargeable battery  
Strap  
Battery charger  
Memory card/  
Memory card adapter  
Quick Start Guide  
The illustrations may differ slightly from the items shipped with your  
product.  
You can purchase optional accessories at a retailer or a Samsung  
service center. Samsung is not responsible for any problems  
caused by using unauthorized accessories.  
Basic functions 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Camera layout  
Before you start, familiarize yourself with your camera’s parts and their functions.  
Microphone  
Shutter button  
POWER button  
Speaker  
Flash  
Lens  
AF-assist light/Timer lamp  
Tripod mount  
USB and A/V port  
Accepts USB cable and A/V cable  
Battery chamber cover  
Insert a memory card and battery  
Basic functions 14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Camera layout  
Zoom button  
In Shooting mode: Zoom in or out  
In Playback mode: Zoom in on part  
of a photo or view files as thumbnails,  
or adjust the volume  
Status lamp  
Blinking: When the camera is  
Attaching the strap  
saving a photo or video, being  
read by a computer or printer,  
when the image is out of focus,  
or there is a problem charging  
the battery  
Steady: When the camera  
is connected to a computer,  
charging the battery, or when the  
image is in focus  
x
y
Display  
Buttons  
(p. 16)  
15  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
 
Camera layout  
Buttons  
Button  
Description  
Button  
Description  
Basic functions  
Other functions  
Move up  
Access options or menus.  
Select a shooting mode.  
Change the display option.  
Change the macro option.  
Change the flash option.  
Change the timer option.  
D
c
Move down  
Move left  
Description  
Mode  
F
Smart Auto: Capture a photo with a scene  
mode selected automatically by the camera.  
Move right  
t
S
Confirm the highlighted option or menu.  
Enter Playback mode.  
Program: Capture a photo with settings you  
have set manually.  
p
N
Live Panorama: Capture and combine a series  
of photos to create a panoramic image.  
Access options in Shooting mode.  
Delete files in Playback mode.  
Picture in Picture: Capture or select a full-  
sized background photo, and then insert a  
smaller photo into the foreground to create a  
synthesized photo.  
d
Scene: Capture a photo with options preset for  
a specific scene.  
s
v
Movie: Record a video.  
16  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
 
Inserting the battery and memory card  
Learn how to insert the battery and an optional memory card into the camera.  
Removing the battery and memory card  
Push the card gently until it  
disengages from the camera,  
and then pull it out of the slot.  
Memory card  
Insert a memory card with the  
gold-colored contacts facing  
up.  
Battery lock  
Memory card  
Slide the lock up to release the  
battery.  
Insert the battery with the  
Samsung logo facing up.  
Rechargeable battery  
Rechargeable battery  
You can use the internal memory for temporary storage if a memory card is  
not inserted.  
Basic functions 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Charging the battery and turning on your camera  
Charging the battery  
Turning on your camera  
Press [POWER] to turn your camera on or off.  
The initial setup screen appears when you turn on the camera  
for the first time. (p. 19)  
Before you use the camera for the first time, you must charge the  
battery. Plug the small end of the USB cable into your camera,  
and then plug the other end of the USB cable into the  
AC adapter.  
Status lamp  
Red light on: Charging  
Red light off: Fully charged  
Red light blinking: Error  
Turning on your camera in Playback mode  
Press [P]. The camera turns on and immediately accesses  
Playback mode.  
Use only the AC adapter and USB cable supplied with your camera. If you  
use another AC adapter (such as SAC-48), the camera battery may not  
charge or work properly.  
If you turn on your camera by pressing and holding [P] until the status lamp  
blinks, the camera does not emit any sounds.  
Basic functions 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Performing the initial setup  
When you turn on your camera for the first time, the initial setup screen appears. Follow the steps below to configure the camera’s basic  
settings.  
Press [  
t
] to select Language, and then  
] or [ ].  
Press [F/t] to select a time zone, and then press [o].  
1
4
To set daylight-savings time, press [D].  
press [  
t
o
Time Zone  
London  
[GMT +00:00] 2012/01/01 12:00PM  
Back  
DST  
Press [  
D
/
c
] to select a language, and then  
2
3
press [o  
].  
Press [D  
/
c
] to select Time Zone, and then  
press [t  
] or [o].  
Basic functions 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Performing the initial setup  
Press [  
D
] or [  
/
c
o
] to select Date/Time Set, and then  
].  
Press [  
D/c] to select Date Type, and then  
5
8
9
press [t  
press [t  
] or [o  
].  
Press [D  
/
c
] to select a date type, and then  
English  
London  
press [o  
].  
Time Zone  
Date/Time Set  
English  
London  
Date Type  
YYYY MM DD  
Time Zone  
Date/Time Set  
Date Type  
YYYY/MM/DD  
MM/DD/YYYY  
DD/MM/YYYY  
Back  
Set  
The screen may differ depending on the language selected.  
Back  
Set  
Press [  
F
/
t
] to select an item.  
6
7
The default date type may differ depending on the language  
selected.  
Press [  
press [  
D/c] to set the date and time, and then  
o
].  
Press [m] to switch to Shooting mode.  
10  
20  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
 
Learning icons  
The icons the camera displays on the screen change according to the mode you select or the options you set.  
3
Shooting options (left)  
Icon  
Description  
1
2
Photo resolution when Intelli  
zoom is on  
Icon  
Description  
Actively moving subject  
Shooting mode  
Zoom indicator  
Zoom ratio  
Aperture value and shutter speed  
Long time shutter  
Current time and date  
EV (Exposure Value)  
3
2
Shooting options (right)  
White balance  
Face tone  
1
Shooting information  
Icon  
Description  
Photo resolution  
Icon  
Description  
Face retouch  
ISO sensitivity  
Smart filter  
Available number of photos  
Video resolution  
Frame rate  
Memory card not inserted  
(Internal memory)  
Image adjust (constrast,  
sharpness, and saturation)  
Photo quality  
Memory card inserted  
: Fully charged  
: Partially charged  
: Empty (Recharge)  
Metering  
Sound Alive on  
Flash  
Burst option  
Timer  
Available recording time  
Auto focus frame  
Camera shake  
Digital Image Stabilization (DIS)  
Auto focus option  
Face detection  
Basic functions 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Selecting options or menus  
To select an option or a menu, press [m] or [f].  
Going back to the previous menu  
Press [ ] again to go back to the previous menu.  
Using [MENU]  
To select options, press [m], and then press  
m
[D/c/F/t] or [o].  
Half-press [Shutter] to return to Shooting mode.  
In Shooting mode, press [  
m
].  
1
2
Select an option or a menu.  
To move up or down, press [  
D] or [c].  
To move left or right, press [  
F
] or [t].  
Press [o] to confirm the highlighted option or menu.  
3
Basic functions 22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Selecting options or menus  
For example, to select a White Balance option  
in Program mode:  
Press [  
D
] or [o  
/
c
] to select White Balance, and then  
].  
5
press [t  
In Shooting mode, press [  
M
].  
Photo Size  
Quality  
EV  
1
2
3
Select  
Press [  
p.  
ISO  
m
].  
White Balance  
Smart Filter  
Photo Size  
Face Detection  
Quality  
EV  
Shooting  
Exit  
Back  
Sound  
ISO  
Display  
Settings  
White Balance  
Smart Filter  
Press [  
F/t] to select a White Balance option.  
6
7
Face Detection  
Change  
Exit  
Daylight  
Press [  
D
/c] to select  
a
, and then press  
4
[t] or [o].  
Back  
Move  
Press [o  
] to save your settings.  
23  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
Selecting options or menus  
Press [  
D
/
c
] to scroll to  
.
Using [Fn]  
4
5
6
You can access shooting options by pressing [f], but some  
options are not available.  
For example, to select a White Balance option  
in Program mode:  
White Balance  
In Shooting mode, press [  
M].  
1
2
3
Exit  
Move  
Select  
Press [  
p.  
f].  
Press [F  
/
t
] to select a White Balance option.  
Photo Size  
Daylight  
Exit  
Move  
Exit  
Move  
Press [o  
] to save your settings.  
24  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
 
Setting the display and sound  
Learn how to change the basic display information and sound settings.  
Setting the display type  
You can select a display type for the Shooting or Playback mode.  
Each type displays different shooting or playback information.  
See the table below.  
Setting the sound  
Turn the sound your camera emits when you perform functions.  
In Shooting or Playback mode, press [  
m].  
1
2
3
Select  
O
Beep Sound.  
Select an option.  
Option  
Off  
Description  
Show all photographic  
information.  
The camera does not emit any sounds.  
The camera emits sounds.  
1/2/3  
Press [D] repeatedly to change the display type.  
Mode  
Display type  
Hide all information about shooting options.  
Show all information about shooting options.  
Hide all information about the current file.  
Shooting  
Show information about the current file, except the  
shooting settings.  
Playback  
Show all information about the current file.  
Basic functions 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Capturing photos  
Learn how to capture photos easily and quickly in Smart Auto mode.  
In Shooting mode, press [  
M
].  
Half-press [Shutter] to focus.  
1
2
3
4
A green frame means the subject is in focus.  
A red frame means the subject is out of focus.  
Select  
S.  
Align your subject in the frame.  
Press [Shutter] to capture a photo.  
5
6
Press [P] to view the captured photo.  
To delete the photo, press [  
f
], and then select Yes.  
Press [ ] to return to Shooting mode.  
P
7
See page 30 for tips to get clearer photos.  
Basic functions 26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Capturing photos  
Digital zoom  
ps  
Zooming  
The Digital zoom is supported by default in Shooting mode. If you  
zoom in on a subject in Shooting mode and the zoom indicator  
is in the digital range, your camera is using the Digital zoom. By  
using both the 5X Optical zoom and 5X Digital zoom, you can  
zoom in up to 25 times.  
You can capture close-up photos by adjusting the zoom.  
Optical range  
Zoom indicator  
Zoom ratio  
Digital range  
Zoom in  
Zoom out  
The Digital zoom is not available with the Smart Filter effect or  
Tracking AF option.  
If you capture a photo with the Digital zoom, the photo quality may be  
lower than normal.  
The farther you rotate the zoom button, the faster the camera zooms  
in or out.  
When you rotate the zoom button, the zoom ratio shown on the  
screen may change inconsistently.  
27  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
 
Capturing photos  
Intelli zoom  
Setting Intelli zoom  
ps  
If the zoom indicator is in the Intelli range, your camera is using  
the Intelli zoom. Photo resolution varies according to the zoom  
rate if you use the Intelli zoom. By using both the Optical zoom  
and Intelli zoom, you can zoom in up to 10 times.  
In Shooting mode, press [  
m].  
1
2
3
Select  
a
Intelli Zoom.  
Select an option.  
Photo resolution when  
the Intelli zoom is on  
Icon  
Description  
Off: The Intelli zoom is deactivated.  
Optical range  
Zoom indicator  
On: The Intelli zoom is activated.  
Intelli range  
The Intelli zoom is not available with the Smart Filter effect or Tracking  
AF option.  
The Intelli zoom helps you capture a photo with less quality  
deterioration than the Digital zoom. However, the photo quality may be  
lower than when you use the Optical zoom.  
The Intelli zoom is available only when you set a 4:3 resolution ratio.  
If you set another resolution ratio with Intelli zoom on, the Intelli zoom  
will be turned off automatically.  
28  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
 
Capturing photos  
Reducing camera shake (DIS) ps  
DIS may not function properly when:  
-
-
-
-
you move your camera to follow a moving subject  
you use the Digital zoom  
there is too much camera shake  
the shutter speed is slow (for example, when you capture night  
scenes)  
Reduce camera shake digitally in Shooting mode.  
-
-
the battery is low  
you capture a close-up shot  
If you use the DIS function with a tripod, your images may be blurred  
by the vibration of the DIS sensor. Deactivate the DIS function when  
you use a tripod.  
Before correction  
After correction  
S
S
If the camera is hit or dropped, the display will be blurry. If this occurs,  
turn off the camera, and then turn it on again.  
The DIS function is not available when you set Burst option.  
In Shooting mode, press [  
m].  
1
2
3
Select  
a
DIS.  
Select an option.  
Icon  
Description  
Off: DIS is deactivated.  
On: DIS is activated.  
29  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
   
Tips for getting a clearer photo  
Holding your camera correctly  
Reducing camera shake  
Set the Digital Image Stabilization option to reduce  
Ensure nothing is  
blocking the lens,  
flash, or microphone.  
camera shake digitally. (p. 29)  
When  
is displayed  
Half-pressing the shutter button  
Half-press [Shutter] and adjust the  
focus. The camera adjusts the focus and  
exposure automatically.  
Camera shake  
When you shoot in the dark, avoid setting the flash option to  
Slow Sync or Off. The aperture remains open longer and it may be  
harder to hold the camera steady long enough to capture a clear  
photo.  
The camera sets the aperture value  
and shutter speed automatically.  
Focus frame  
Press [Shutter] to capture the photo  
if the focus frame appears in green.  
Change the composition and  
Use a tripod or set the flash option to Fill in. (p. 52)  
Set ISO sensitivity options. (p. 54)  
half-press [Shutter] again if the  
focus frame appears in red.  
30  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
   
Preventing your subject from being out of focus  
When you capture photos in low light  
Turn on the flash.  
It may be difficult to get your subject in focus when:  
-
there is little contrast between the subject and background  
(for example, when your subject is wearing clothing that is similar in  
color to the background)  
(p. 52)  
-
-
-
-
the light source behind the subject is too bright  
the subject is shiny or reflective  
the subject includes horizontal patterns, such as blinds  
the subject is not positioned in the center of the frame  
When subjects are moving rapidly  
Use the Continuous  
or Motion Capture  
function. (p. 68)  
Using the focus lock  
Half-press [Shutter] to focus. When the subject is in focus,  
you can reposition the frame to change the composition.  
When you are ready, press [Shutter] to capture your photo.  
31  
Download from Www.SomanuBaalssi.ccfounmct.ioAnsll Manuals Search And Download.  
Using the Smart Auto mode  
In Smart Auto mode, your camera automatically chooses the appropriate camera settings based on the type of scene it detects. The Smart  
Auto mode is helpful if you are not familiar with the camera settings for various scenes.  
In Shooting mode, press [  
M].  
Icon  
Description  
1
2
3
Portraits with backlighting  
Select  
S.  
Portraits  
Align your subject in the frame.  
Close-up photos of objects  
Close-up photos of text  
Sunsets  
The camera automatically selects a scene. An appropriate  
scene icon appears at the top left of the screen. The icons are  
listed below.  
Blue skies  
Forested areas  
Close-up photos of colorful subjects  
Camera is stabilized or on a tripod (when shooting in  
the dark)  
Actively moving subjects  
Fireworks (when using a tripod)  
Icon  
Description  
Landscapes  
Half-press [Shutter] to focus.  
4
5
Scenes with bright white backgrounds  
Landscapes at night  
Press [Shutter] to capture the photo.  
Portraits at night  
Landscapes with backlighting  
Extended functions 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the Smart Auto mode  
If the camera does not recognize an appropriate scene mode,  
it uses the default settings for the mode.  
S
Even if it detects a face, the camera may not select a portrait mode  
depending on the subject's position or lighting.  
The camera may not select the correct scene depending on the  
shooting conditions, such as camera shake, lighting, or distance to  
the subject.  
Even if you use a tripod, the camera may not detect the  
if the subject is moving.  
mode  
In  
S
mode, the camera consumes more battery power, because  
it changes settings often to select appropriate scenes.  
Extended functions 34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Program mode  
In Program mode, you can set most options, except the shutter speed and aperture value, which the camera sets automatically.  
In Shooting mode, press [  
M].  
1
2
3
Select  
p.  
Set the desired options.  
For a list of options, refer to "Shooting options". (p. 48)  
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
4
5
Press [Shutter] to capture the photo.  
Extended functions 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the Live Panorama mode  
In Live Panorama mode, you can capture a wide panoramic scene in a single photo. Capture and combine a series of photos to create a  
panoramic image.  
With [Shutter] pressed, slowly move the camera in the  
direction that will let it capture the rest of the panorama.  
5
When the viewfinder is aligned with the next scene, the  
camera captures the next photo automatically.  
Shooting example  
S
In Shooting mode, press [  
M].  
1
2
3
Select  
N.  
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
Align the camera with the far left or the far right, or very top or  
bottom, of the scene you want to capture.  
When you are finished, release [Shutter].  
6
Press and hold [Shutter] to start shooting.  
4
When you have captured all the necessary shots, the camera  
combines them into one panoramic photo.  
Extended functions 36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using the Live Panorama mode  
For best results when capturing panoramic photos, avoid the  
following:  
-
-
-
-
-
-
-
-
moving the camera too quickly or too slowly  
moving the camera too little to capture the next image  
moving the camera at irregular speeds  
shaking the camera  
changing the camera direction while capturing a photo  
shooting in dark places  
capturing moving subjects nearby  
shooting conditions where the brightness or color of light is  
changing  
Selecting Live Panorama mode will disable the Digital and Optical  
zoom functions. If you select Live Panorama mode while the lens  
is zoomed in, the camera automatically zooms out to the default  
position.  
In Live Panorama mode, some shooting options are not available.  
The camera may stop shooting due to the shooting composition or  
movement within the scene.  
In Live Panorama mode, your camera may not capture the last scene  
in its entirety if you stop moving the camera exactly where you want  
the scene to end. To capture the entire scene, move your camera  
slightly beyond the point where you want the scene to end.  
Extended functions 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Picture-in-Picture mode  
In the Picture-in-Picture mode, you can capture or select a full-sized background photo, and then insert a smaller photo into the foreground.  
In Shooting mode, press [  
M
].  
Press [  
the insertion size.  
o
], and then press [  
D/c/F/t] to change  
1
2
3
6
Select  
d.  
Press [ ] to save the setting.  
o
7
8
Half-press [Shutter] to focus, and then press [Shutter]  
to capture the photo.  
Half-press [Shutter] to focus, and then press [Shutter]  
to capture and insert a photo.  
To select a background photo from your saved photos,  
press [ ], and then select Background “  
m
a
The insertion window appears larger when you half-press  
[Shutter], so that you can determine whether or not the  
subject is in focus.  
Album a desired photo. You cannot select a video file or a  
photo captured in Live Panorama mode.  
Press [  
o
] to set the photo as a background image.  
4
5
To view the synthesized photo, press [  
P
].  
9
To recapture a background photo, press [ ].  
m
Press [P] again to return to Shooting mode.  
When capturing background photos, the resolution is automatically set  
to and all photos captured are saved.  
The final Picture-in-Picture photos are saved as one combined file and  
the inserted photos are not saved separately.  
When inserting an image, the resolution for the combined file is  
automatically set to  
.
The maximum size of the insertion window is 1/4 of the screen, and  
the aspect ratio stays the same when changing the size.  
When using the Picture-in-Picture mode, the focus distance options  
are not available.  
Back  
Move  
Press [o], and then press [D/c/F/t] to change  
the insertion point.  
Extended functions 38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using the Scene mode  
In Scene mode, you can capture a photo with options that are preset for a specific scene.  
In Shooting mode, press [  
M].  
Option  
Description  
1
2
3
Landscape  
Capture still-life scenes and landscapes.  
Select  
s.  
Clearly capture text from printed or electronic  
documents.  
Text  
Select a scene.  
Capture scenes at sunset, with natural-looking  
reds and yellows.  
Sunset  
Magic Frame  
Beauty Shot  
Intelligent Portrait  
Funny Face  
Night  
Dawn  
Capture scenes at sunrise.  
Capture backlit subjects.  
Backlight  
Reduce underexposure of subjects caused by  
sunlight reflected from sand or snow.  
Beach & Snow  
Landscape  
Text  
To change a scene mode, press [m], and then  
select . You can select any of the scenes listed.  
s
Option  
Description  
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
4
5
Capture scenes with various frame effects.  
(p. 40)  
Magic Frame  
Capture a portrait with options to hide facial  
imperfections. (p. 41)  
Press [Shutter] to capture the photo.  
Beauty Shot  
Intelligent  
Portrait  
Automatically extract and save close-up portraits  
of an individual subject in a scene. (p. 42)  
Funny Face  
Capture a photo with funny face effects. (p. 43)  
Capture scenes at night or in low lighting  
(using a tripod is recommended). (p. 44)  
Night  
Extended functions 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using the Scene mode  
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
Using the Magic Frame mode  
In Magic Frame mode, you can apply various frame effects to  
your photos. The shape and the feel of the photos will change  
according to the frame you select.  
6
7
Press [Shutter] to capture the photo.  
In Shooting mode, press [  
M].  
In Magic Frame mode, the resolution is automatically set to  
.
1
2
3
4
5
Select  
Press [  
Select  
s
Magic Frame.  
].  
Frame.  
m
a
Select an option.  
Mural  
Move  
Back  
Extended functions 40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using the Scene mode  
Select  
a
Face Retouch.  
Using the Beauty Shot mode  
7
8
In Beauty Shot mode, you can capture a portrait with options to  
hide facial imperfections.  
Select an option.  
For example, increase the face retouch setting to hide more  
imperfections.  
In Shooting mode, press [M].  
1
2
3
4
5
Select  
Press [  
Select  
s
Beauty Shot.  
].  
Face Tone.  
Level 2  
m
a
Select an option.  
For example, increase the face tone setting to make skin  
appear lighter.  
Back  
Move  
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
9
Level 2  
Press [Shutter] to capture the photo.  
10  
When you use the Beauty Shot mode, the focus distance will be set to  
Auto Macro.  
Back  
Move  
Press [m].  
6
Extended functions 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using the Scene mode  
Using the Intelligent Portrait mode  
The Intelligent Portrait mode will save only the original photo if:  
-
-
-
no face is detected  
more than 2 faces are detected  
the detected facial area is larger than a certain ratio  
In Intelligent Portrait mode, you can extract and save close-up  
portraits of an individual subject in a scene. Once the camera  
detects a face from the scene, it automatically enlarges it and  
crops the image around the face. The camera then saves the full  
scene and two close-up portraits as three separate files.  
Cropped photos will be saved with the same aspect ratio (16:9) as the  
original or the inverse aspect ratio (9:16).  
When you use the Intelligent Portrait mode, the focus distance will be  
set to Auto Macro.  
In Shooting mode, press [  
M
].  
1
2
3
Select  
s
Intelligent Portrait.  
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
Press [Shutter] to capture the photo.  
4
The original photo and 2 cropped photos are showed on the  
display instantly and saved under consecutive file names.  
Extended functions 42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using the Scene mode  
Press [  
m
].  
Using the Funny Face mode  
6
7
8
9
In Funny Face mode, you can distort your subject’s face with  
funny effects.  
Select  
a
Distortion Level.  
Adjust the distortion level.  
In Shooting mode, press [M].  
1
2
3
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
Select  
s
Funny Face.  
Aim the camera at the subject's face.  
Press [Shutter] to capture the photo.  
10  
The camera detects faces with the face detection function.  
The Funny Face mode does not work if the camera cannot detect  
a face.  
If the camera detects 2 or more faces, the effect will be applied only to  
the face nearest the camera.  
When using the Funny Face mode, the focus distance options are  
not available.  
Press [  
m
].  
4
5
Select  
a
Funny Effect a funny effect.  
You can review the face with the effect applied on the display.  
Up Nose  
Back  
Move  
Extended functions 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using the Scene mode  
Select an option.  
Using the Night mode  
In Night mode, you can use a slow shutter speed to extend  
the time the shutter stays open. Increase the aperture value to  
prevent overexposure.  
6
If you select AUTO, the aperture value or shutter speed will be  
adjusted automatically.  
Align your subject in the frame, and then half-press  
[Shutter] to focus.  
7
8
In Shooting mode, press [  
M].  
1
2
3
4
5
Press [Shutter] to capture the photo.  
Select  
Press [  
Select  
s
Night.  
].  
Long Time Shutter.  
m
Use a tripod to prevent blurry photos.  
When using the Night mode, the focus distance options are not  
available.  
a
Select the aperture value or shutter speed.  
Aperture value  
Shutter speed  
Long Time Shutter  
Move  
Back  
Extended functions 44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the Movie mode  
In Movie mode, you can record HD videos of up to 20 minutes in length. The camera saves recorded videos as MJPEG files.  
Some memory cards may not support high definition recording. If your card does not, set a lower resolution.  
Memory cards with slow writing speeds will not support high-resolution videos. To record high-resolution videos, use memory cards with faster write speeds.  
If you use the zoom function when recording a video, the camera may record the noise of the zoom operating. To decrease zoom noise, use the Sound Alive  
function. See Steps 7 and 8 below.  
In Shooting mode, press [  
M].  
Select  
v
Sound Alive.  
1
2
3
4
5
7
8
Select  
Press [  
Select  
v.  
Select a Sound Alive option.  
Icon  
Description  
m
].  
Sound Alive On: Turn on the Sound Alive function to  
reduce the zoom noise.  
v
Frame Rate.  
Sound Alive Off: Turn off the Sound Alive function.  
The camera can record the zoom noise.  
Select a frame rate (the number of frames per second).  
As the frame rate increases, action appears more natural, but  
the file size also increases.  
Mute: Do not record sounds.  
Press [m].  
6
Do not block the microphone when you use the Sound Alive  
function.  
Recordings made with Sound Alive may differ from actual  
sounds.  
Extended functions 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the Movie mode  
Pause recording  
Set desired options.  
9
For a list of options, refer to "Shooting options". (p. 48)  
The camera allows you to temporarily pause a video while  
recording. With this function, you can record separate scenes as  
a single video.  
Press [Shutter] to start recording.  
10  
11  
Press [Shutter] again to stop recording.  
Stop  
Record  
Press [o] to pause while recording.  
Press [o] to resume.  
Extended functions 46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Movie mode  
Using the Smart Scene Detection mode  
In Smart Scene Detection mode, your camera automatically  
chooses the appropriate camera settings based on the scene it  
has detected.  
Icon  
Description  
Landscapes  
Sunsets  
Blue skies  
In Shooting mode, press [M].  
1
2
3
4
5
Forested areas  
Select  
Press [  
Select  
v.  
Press [Shutter] to start recording.  
6
7
m
].  
Press [Shutter] again to stop recording.  
v
Smart Scene Detection On.  
If the camera does not recognize an appropriate scene mode,  
it uses the default settings for the Smart Scene Detection mode.  
The camera may not select the correct scene depending on the  
shooting conditions, such as camera shake, lighting, and distance to  
the subject.  
Align your subject in the frame.  
The camera automatically selects a scene. An appropriate  
scene icon will appear at the top left of the screen.  
Smart Filter effects are not available in Smart Scene Detection mode.  
Extended functions 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Shooting options  
Learn how to set the options in Shooting mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Selecting a resolution and quality  
Learn how to change the image resolution and quality settings.  
Selecting a resolution  
Icon  
Description  
As you increase the resolution, your photo or video will include  
more pixels, so it can be printed on larger paper or displayed on  
a larger screen. When you use a high resolution, the file size will  
also increase.  
1984 X 1488: Print on A5 paper.  
1920 X 1080: Print on A5 paper in panorama ratio (16:9)  
or play back on an HDTV.  
1024 X 768: Attach to an email.  
Sps  
].  
Setting the photo resolution  
In Shooting mode, press [  
m
1
2
3
Setting the video resolution  
v
Select  
a
Photo Size.  
In Video Shooting mode, press [m].  
1
2
3
Select an option.  
Select  
v
Movie Size.  
Icon  
Description  
4608 X 3456: Print on A1 paper.  
Select an option.  
Icon  
Description  
4608 X 3072: Print on A1 paper in wide ratio (3:2).  
1280 X 720 HQ: High-quality files to play back on an  
HDTV.  
4608 X 2592: Print on A2 paper in panorama ratio (16:9)  
or play back on an HDTV.  
640 X 480: Files to play back on an analog TV.  
3648 X 2736: Print on A3 paper.  
320 X 240: Post on a web page.  
2592 X 1944: Print on A4 paper.  
Shooting options 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Selecting a resolution and quality  
Setting the video quality  
v
Selecting an image quality  
Set the photo and video quality settings. Higher image quality  
settings will result in larger file sizes.  
The camera compresses and saves the videos you record in  
MJPEG format.  
In Video Shooting mode, press [  
m].  
1
2
3
Setting the photo quality  
pds  
The camera compresses and saves the photos you capture in  
the JPEG format.  
Select  
v
Frame Rate.  
Select an option.  
In Shooting mode, press [  
m].  
1
2
3
Icon  
Description  
Select  
a
Quality.  
30 FPS: Record 30 frames per second.  
15 FPS: Record 15 frames per second.  
Select an option.  
Icon  
Description  
Super Fine: Capture photos in super high quality.  
Fine: Capture photos in high quality.  
Normal: Capture photos in normal quality.  
Shooting options 50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Spdsv  
Using the timer  
Learn how to set the timer to delay shooting.  
In Shooting mode, press [  
t].  
Press [Shutter] to start the timer.  
1
3
The AF-assist light/timer lamp blinks. The camera will  
automatically capture a photo after the specified time has  
elapsed.  
Off  
Press [Shutter] or [t] to cancel the timer.  
Depending on the Face Detection options or the Focus Area options  
you selected, the timer function may not be available.  
Timer options are not available if you set Burst options.  
Select an option.  
2
Icon  
Description  
Off: The timer is not active.  
10 Sec: Capture a photo after a 10-second delay.  
2 Sec: Capture a photo after a 2-second delay.  
Double: Capture one photo after a 10-second delay  
and another photo after a 2-second delay.  
Available options may differ depending on the shooting conditions.  
Shooting options 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Shooting in the dark  
Learn how to capture photos at night or in low light conditions.  
Preventing red-eye ps  
Using the flash Spds  
If the flash fires when you capture a photo of a person in the dark,  
a red glow may appear in the person’s eyes. To prevent this,  
select Red-eye or Red-eye Fix. Refer to flash options in  
“Using the flash”.  
Use the flash when you capture photos in the dark or when you  
need more light in your photos.  
In Shooting mode, press [F].  
1
Auto  
Before correction  
After correction  
S
S
Select an option.  
2
Icon  
Description  
Off:  
The flash will not fire.  
The camera will display the shake warning  
you are shooting in low light.  
when  
Shooting options 52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Shooting in the dark  
Icon  
Description  
Red-eye Fix:  
Icon  
Description  
Red-eye:  
The flash fires twice when the subject or background  
is dark. The camera corrects red-eyes through its  
advanced software analysis.  
The flash will fire twice when the subject or  
background is dark to reduce the red-eye effect.  
There is an interval between the 2 bursts of the flash.  
Do not move until the flash fires a second time.  
There is an interval between the 2 bursts of the flash.  
Do not move until the flash fires a second time.  
Auto: The flash will fire automatically when the subject or  
Slow Sync:  
background is dark.  
The flash fires and the shutter stays open longer.  
Auto: The camera will select a proper flash setting for  
the scene it detects in Smart Auto mode.  
This option is recommended when you want to  
capture more ambient light to reveal more details in  
the background.  
Available options may differ depending on the shooting conditions.  
Use a tripod to prevent your photos from blurring.  
Flash options are not available if you set Burst options or select  
Self-Portrait or Blink Detection.  
Make sure that your subjects are within the recommended distance  
from the flash. (p. 118)  
If light from the flash is reflected or there is a substantial amount of  
dust in the air, tiny spots may appear in your photo.  
The camera will display the shake warning  
you are shooting in low light.  
when  
Fill in:  
The flash always fires.  
The camera automatically adjusts light intensity.  
Shooting options 53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Shooting in the dark  
Adjusting the ISO sensitivity  
p
The ISO sensitivity is the measure of a film’s sensitivity to light as  
defined by the International Organization for Standardization (ISO).  
The higher ISO sensitivity you select, the more sensitive to light  
your camera becomes. Use a higher ISO sensitivity to capture  
better photos and reduce camera shake when not using the  
flash.  
In Shooting mode, press [  
m].  
1
2
3
Select  
a
ISO.  
Select an option.  
Select to use an appropriate ISO sensitivity based on the  
brightness of the subject and lighting.  
Higher ISO sensitivities may result in more image noise.  
Shooting options 54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Changing the camera’s focus  
Learn how to adjust the camera’s focus to suit the subject and the shooting conditions.  
Using macro psv  
Use macro to capture close-up photos of subjects, such as  
flowers or insects.  
Using auto focus Spsv  
To capture sharp photos, select the appropriate focus option  
according to your distance from the subject.  
In Shooting mode, press [  
c].  
1
Normal (AF)  
Try to hold the camera firmly to prevent blurry photos.  
Turn off the flash if the distance to the subject is less than 40 cm.  
Shooting options 55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Changing the camera’s focus  
Select an option.  
Focus on the subject you want to track, and then  
2
3
press [o].  
Icon  
Description  
A focus frame appears on the subject and follows the subject  
as you move the camera.  
Normal (AF): Focus on a subject farther than 80 cm  
away. 250 cm when you use the zoom.  
Macro: Focus on a subject that is 5-80 cm from the  
camera. 100-250 cm when you use the zoom.  
Auto Macro:  
Focus on a subject farther than 5 cm away.  
Farther than 100 cm away when you use the zoom.  
It is set automatically in some shooting modes.  
Available options may differ depending on the shooting conditions.  
The white frame means that your camera is tracking the  
subject.  
When you half-press [Shutter], the green frame means that  
your subject is in focus.  
ps  
Using tracking auto focus  
Tracking AF allows you to track and auto focus on your subject,  
even when you are moving.  
Press [Shutter] to capture the photo.  
4
In Shooting mode, press [m  
].  
1
2
Select  
a
Focus Area Tracking AF.  
Shooting options 56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Changing the camera’s focus  
Adjusting the focus area ps  
You can get clearer photos by selecting an appropriate focus  
area according to your subject's location in the scene.  
If you do not select a focus area, the focus frame will appear in the  
center of the screen.  
Tracking a subject may fail when:  
-
-
-
-
-
-
the subject is too small  
the subject moves excessively  
the subject is backlit or you are shooting in a dark place  
colors or patterns on the subject and the background are the same  
the subject includes horizontal patterns, such as blinds  
the camera shakes excessively  
In Shooting mode, press [  
m].  
1
2
3
Select  
a
Focus Area.  
Select an option.  
When tracking a subject fails, the focus frame will appear as a white  
single-line frame ( ).  
Icon  
Description  
If the camera fails to track the subject, you must reselect the subject  
to track.  
If the camera fails to focus, the focus frame will change to a red  
single-line frame ( ).  
If you use this function, you cannot set Face Detection options, Timer  
options, Intelli zoom, and Smart Filter effects.  
Center AF: Focus on the center of the frame (suitable  
when subjects are located at or near the center).  
Multi AF: Focus on one or more of 9 possible areas.  
Tracking AF: Focus on and track the subject. (p. 56)  
Available options may differ depending on the shooting conditions.  
Shooting options 57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ps  
Using Face Detection  
If you use Face Detection options, your camera can automatically detect a human face. When you focus on a human face, the camera  
adjusts the exposure automatically. Use Blink Detection to detect closed eyes or Smile Shot to capture a smiling face. You can also use  
Smart Face Recognition to register faces and prioritize the focus on them.  
Detecting faces  
When your camera detects a face, it tracks the detected face  
automatically.  
Face Detection may not be effective when:  
Your camera automatically detects up to 10 human faces in one  
scene.  
-
-
-
-
-
-
the subject is far from the camera  
it is too bright or too dark  
the subject is not facing the camera  
the subject is wearing sunglasses or a mask  
the subject’s facial expression changes drastically  
the subject is backlit or the lighting conditions are unstable  
In Shooting mode, press [  
m
].  
1
2
Select  
a
Face Detection Normal.  
Face Detection is not available when you set the Smart Filter effects,  
Image adjustment, or Tracking AF.  
Depending on the shooting options you selected, available Face  
Detection options may differ.  
Depending on the Face Detection options you selected, the timer  
function may not be available.  
When you set Face Detection options, the AF area is automatically  
set to Multi AF.  
The face nearest the  
camera or nearest the  
center of the scene appears  
in a white focus frame and  
the rest of the faces appear  
in gray focus frames.  
Depending on the Face Detection options you selected, Burst options  
may not be available.  
When you set Smart Face Recognition option and capture photos of  
detected faces, they will be registered in the face list.  
You can view registered faces in order of priority in Playback mode.  
(p. 75) Even though faces are registered successfully, they may not be  
classified in Playback mode.  
The closer you are to the subjects, the quicker your camera will detect faces.  
A face detected with Smart Face Recognition option may not appear  
in the face list or Smart Album.  
Shooting options 58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Face Detection  
Capturing a self portrait shot  
Capture photos of yourself. The camera sets the focus distance  
to close-up, and then emits a beep when ready.  
Capturing a smile shot  
The camera automatically releases the shutter when it detects a  
smiling face.  
In Shooting mode, press [  
m
].  
In Shooting mode, press [  
m
].  
Face Detection Smile Shot.  
Compose your shot.  
1
2
3
4
1
2
3
Select  
a
Face Detection Self-Portrait.  
Select  
a
Compose your shot with the lens facing you.  
The camera automatically releases the shutter when it detects  
a smiling face.  
When you hear a quick beep, press [Shutter].  
When your subject smiles  
broadly, your camera can detect  
the smile more easily.  
When faces are located in the center,  
the camera beeps rapidly.  
If you turn Volume off in the sound settings, the camera will not emit a beep.  
(p. 99)  
Shooting options 59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Face Detection  
Detecting eye blinking  
Using Smart Face Recognition  
If your camera detects closed eyes, it will automatically capture  
2 photos in succession.  
The camera automatically registers faces that you frequently  
photograph. The Smart Face Recognition feature will automatically  
prioritize the focus on those faces and on favorite faces. The Smart  
Face Recognition feature is available only when you use a memory  
card.  
In Shooting mode, press [m  
].  
1
2
Select  
a
Face Detection Blink Detection.  
In Shooting mode, press [  
m
].  
1
2
Select  
a
Face Detection Smart Face Recognition.  
: Faces that you have registered as favorites.  
(To register faces as favorites, refer to page 61.)  
: Faces that the camera has automatically registered.  
Shooting options 60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Face Detection  
Registering faces as your favorites (My Star)  
You can register your favorite faces to prioritize the focus and  
exposure on those faces. This feature is available only when you  
use a memory card.  
The camera may recognize and register faces incorrectly depending  
on lighting conditions, drastic changes in the subject's pose or face,  
and whether or not the subject is wearing glasses.  
The camera can automatically register up to 12 faces. If the camera  
recognizes a new face when 12 faces have already been registered,  
it will replace the lowest priority face with the new one.  
In Shooting mode, press [  
m
].  
1
2
3
Select  
a
Smart FR Edit My Star.  
Align your subjects face with the oval guideline, and then  
press [Shutter] to register the face.  
Back  
Set  
Shooting options 61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Face Detection  
Viewing your favorite faces  
Capture photos of one person at a time when registering faces.  
Capture 5 photos of the subject’s face for best results: one each  
from the front, left, right, above, and below.  
When capturing photos from the left, right, above, and below,  
instruct the subject not to turn his or her face more than  
30 degrees.  
In Shooting mode, press [  
m].  
1
2
Select  
a
Smart FR Edit Face List.  
To change the ranking of your favorite faces, press [f], and then  
select Edit Ranking. (p. 74)  
To delete a favorite face, press [  
You can register a face even if you capture only one photo of the  
subject's face.  
f], and then select Delete. (p. 75)  
When you are finished capturing the photos, the face list  
appears.  
4
Your favorite faces are indicated with a  
on the face list.  
You can register up to 8 favorite faces.  
The flash will not fire when you register a favorite face.  
If you register the same face twice, you can delete one of the faces  
in the face list.  
Shooting options 62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting brightness and color  
Learn how to adjust the brightness and color for better image quality.  
Select a value to adjust the exposure.  
Adjusting the exposure manually (EV)  
3
The photo will be brighter as the exposure value increases.  
When you adjust the exposure value, the icon will appear as  
shown below.  
pv  
Depending on the intensity of the ambient light, your photos  
may be too bright or dark. In these cases, you can adjust the  
exposure to get a better photo.  
Darker (-)  
Neutral (0)  
Brighter (+)  
S
S
S
Press [  
o] to save your settings.  
4
In Shooting mode, press [  
m].  
1
2
Once you adjust the exposure, the setting will be stored automatically.  
You may need to change the exposure value later to avoid  
overexposure or underexposure.  
Select  
a
or  
v
EV.  
If you cannot decide on an appropriate exposure, select AEB  
(Auto Exposure Bracket). The camera will capture 3 consecutive  
photos, each with a different exposure: normal, underexposed, and  
overexposed. (p. 68)  
Shooting options 63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Adjusting brightness and color  
Select an option.  
p
Compensating for backlighting (ACB)  
3
When the light source is behind your subject or there is high  
contrast between your subject and the background, your subject  
is likely to appear dark in the photo. In this case, set the Auto  
Contrast Balance (ACB) option.  
Icon  
Description  
Off: ACB is off.  
On: ACB is on.  
The ACB feature is always on in Smart Auto mode.  
The ACB feature is not available when you set Burst options or  
Smart Filter options.  
Without ACB  
With ACB  
S
S
In Shooting mode, press [  
m].  
1
2
Select  
a
ACB.  
Shooting options 64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Adjusting brightness and color  
Changing the metering option pv  
The metering mode refers to the way in which a camera  
measures the quantity of light. The brightness and lighting of your  
photos will vary depending on the metering mode you select.  
Icon  
Description  
Spot:  
Your camera measures only the light intensity at the  
very center of the frame.  
If a subject is not in the center of the frame, your  
photo may be improperly exposed.  
In Shooting mode, press [  
m].  
1
2
3
Suitable for a subject with backlighting.  
Select  
a
or  
v
Metering.  
Center-weighted:  
Select an option.  
Your camera averages the meter reading of the entire  
frame with emphasis placed on the center.  
Icon  
Description  
Multi:  
Suitable for photos with subjects in the center of the  
frame.  
Your camera divides the frame into several areas,  
and then measures the light intensity of each area.  
Suitable for general photos.  
Shooting options 65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Adjusting brightness and color  
In Shooting mode, press [  
m
].  
Selecting a White Balance setting pv  
1
2
3
The color of your photo depends on the type and quality of the  
light source. If you want the color of your photo to be realistic,  
select a White Balance setting that is appropriate for the lighting  
conditions, such as Auto WB, Daylight, Cloudy, or Tungsten.  
Select  
a
or  
v
White Balance.  
Select an option.  
Icon  
Description  
Auto WB: Automatically set the White Balance based  
on the lighting conditions.  
Daylight: For outdoor photos on a sunny day.  
Cloudy: For outdoor photos on a cloudy day or in  
shadows.  
Auto WB  
Daylight  
Fluorescent_H: For shooting under a daylight  
fluorescent or 3-way fluorescent light.  
Fluorescent_L: For shooting under white fluorescent  
light.  
Tungsten: For shooting indoor photos under  
incandescent bulbs or halogen lamps.  
Measure: Shutter: To use White Balance settings that  
you define. (p. 67)  
Cloudy  
Tungsten  
Shooting options 66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Adjusting brightness and color  
Defining your own White Balance  
You can customize the White Balance by capturing a photo of  
a white surface, such as a piece of paper, under the lighting  
conditions in which you intend to capture a photo. The White  
Balance feature will help you to match the colors in your photo  
with the actual scene.  
In Shooting mode, press [  
m
].  
1
2
3
4
Select  
a
or  
v
White Balance.  
Scroll to Measure: Shutter.  
Aim the lens at a piece of white paper, and then  
press [Shutter].  
The "New white balance value is set." message appears  
on the screen.  
Shooting options 67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
p
Using burst modes  
It can be difficult to capture photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos.  
Also, it can be difficult to adjust the exposure correctly and select a proper light source. In these cases, select one of the burst modes.  
Icon  
Description  
Motion Capture: While you are pressing [Shutter],  
the camera captures  
photos (6 photos per second;  
maximum of 30 photos).  
AEB:  
Capture 3 consecutive photos, each with a different  
exposure: normal, underexposed, and overexposed.  
Use a tripod to prevent blurry photos.  
In Shooting mode, press [  
m].  
1
2
3
Select  
a
Drive.  
You can use the flash, timer, ACB, DIS, and Smart Filter options only  
when you select Single.  
When you select Motion Capture, your camera will set the resolution  
and set the ISO sensitivity to Auto.  
Depending on the Face Detection option you selected, some Burst  
options may not be available.  
Select an option.  
to  
Icon  
Description  
Single: Capture a single photo.  
It may take longer to save the photos depending on the memory card  
capacity and performance.  
Continuous:  
While you are pressing [Shutter], the camera  
continuously captures photos.  
The maximum number of photos depends on the  
capacity of your memory card.  
Shooting options 68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Applying effects/Adjusting images  
Available filters while capturing a photo  
Applying Smart Filter effects pv  
Apply various filter effects to your photos and videos to create  
unique images.  
Icon  
Description  
Normal: No effect  
Miniature: Apply a tilt-shift effect to make the subject  
appear in miniature.  
Vignetting: Apply the retro-looking colors, high contrast,  
and strong vignette effect of Lomo cameras.  
Half Tone Dot: Apply a halftone effect.  
Miniature  
Vignetting  
Sketch: Apply a pen sketch effect.  
Fish-eye: Blacken the edges of the frame and distort  
objects to imitate the visual effect of a fisheye lens.  
Defog: Make image clearer.  
Classic: Apply a black and white effect.  
Retro: Apply a sepia tone effect.  
Negative: Apply a negative film effect.  
Fish-eye  
Sketch  
In Shooting mode, press [  
m
].  
1
Select  
a
or  
v
Smart Filter.  
2
3
Depending on the option you select, the photo size may change to  
or smaller automatically.  
If you set Smart Filter effects, you cannot use the Face Recognition  
options, ACB, Burst options, Image Adjustment options, Intelli zoom,  
or Tracking AF.  
Select an effect.  
Shooting options 69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Applying effects/Adjusting images  
Available filters while recording a video  
If you select Miniature, the miniature recording time is also displayed  
with the Miniature icon and is shorter than the real recording time.  
If you select Miniature, you cannot record the video sound.  
Icon  
Description  
Normal: No effect  
Depending on the option you select, the recording speed may change  
to  
and the recording resolution may change to  
or smaller  
Palette Effect 1: Create a vivid look with sharp contrast  
and strong color.  
automatically.  
Palette Effect 2: Make scenes clean and clear.  
Palette Effect 3: Apply a soft brown tone.  
Palette Effect 4: Create a cold and monotone effect.  
Miniature: Apply a tilt-shift effect to make the subject  
appear in miniature.  
Vignetting: Apply the retro-looking colors, high contrast,  
and strong vignette effect of Lomo cameras.  
Fish-eye: Distort close objects to imitate the visual effect of  
a fisheye lens.  
Defog: Make image clearer.  
Classic: Apply a black and white effect.  
Retro: Apply a sepia tone effect.  
Negative: Apply a negative film effect.  
Shooting options 70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Applying effects/Adjusting images  
Press [  
F
/
t
] to adjust each value.  
p
4
Adjusting images  
Adjust the sharpness, saturation, or contrast of your photos.  
Contrast  
Description  
-
Decrease the color and brightness.  
Increase the color and brightness.  
In Shooting mode, press [  
m].  
1
2
3
+
Select  
a
Image Adjust.  
Sharpness  
Description  
Select an option.  
Soften the edges on your photos (suitable for  
editing the photos on your computer).  
-
Contrast  
Sharpness  
Saturation  
Sharpen the edges to improve the clarity of your  
photos. This may also increase the noise in your  
photos.  
+
Saturation  
Description  
Image Adjust  
-2  
-2  
-1  
-1  
0
0
+1  
+1  
+2  
+2  
-
Decrease the saturation.  
Increase the saturation.  
Contrast  
Sharpness  
Saturation  
+
-2  
-1  
0
+1  
+2  
Press [o] to save your settings.  
5
Back  
Move  
Select 0 if you do not want to apply any effects (suitable for printing).  
If you set adjustment functions, you cannot use Smart Filter options  
and Face Detection options.  
Shooting options 71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Viewing photos or videos in Playback mode  
Learn how to play back photos or videos and how to manage files.  
Photo file information  
Starting Playback mode  
View photos or play videos stored in your camera.  
Memory in use  
File Information  
Press [  
P].  
1
The most recent file will be displayed.  
If the camera is off, it will turn on and display the most recent  
file.  
Press [  
F
/
t
] to scroll through files.  
] to scroll through files quickly.  
2
Press and hold [  
F/t  
Icon  
Description  
If you want to view files stored in the internal memory, remove your  
memory card.  
You may not be able to edit or play back files that were captured with  
other cameras, due to unsupported sizes (image size, etc) or codecs.  
Use a computer or another device to edit or play back these files.  
Print order has been set (DPOF)  
Protected file  
Photo includes a registered face (Available only when  
you use a memory card.)  
Folder name–File name  
To display file information on the screen, press [  
D].  
Playback/Editing 73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Viewing photos or videos in Playback mode  
Video file information  
Ranking your favorite faces  
You can rank your favorite faces. The favorite face feature is  
available only when you insert a memory card into the camera.  
In Playback mode, press [  
m
].  
1
2
3
Select  
u
Face List Edit Edit Ranking.  
Select a face from the list, and then press [  
o].  
Play  
Capture  
Face List Edit  
1
2
5
6
7
8
Icon  
Description  
v
Video file  
Protected file  
3
Folder name–File name  
Video length  
4
Back  
Set  
Press [  
and then press [ ].  
D
/
c
] to change the ranking of the face,  
f
4
Playback/Editing 74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Viewing photos or videos in Playback mode  
Deleting favorite faces  
Viewing files by category in Smart Album  
You can delete your favorite faces. The favorite face feature is  
available only when you insert a memory card into the camera.  
View files by category, such as date, face, or file type.  
In Playback mode, rotate [Zoom] to the left.  
1
In Playback mode, press [m  
].  
Face List Edit Delete.  
Select a face, and then press [ ].  
Press [ ].  
When the pop-up message appears, select Yes.  
1
2
3
4
5
Press [  
m].  
2
3
Select  
u
Select a category.  
o
f
Type  
Date  
Color  
Week  
Face  
Back  
Set  
Option  
Type  
Description  
View files by the file type.  
Date  
View files by the date they were saved.  
View files by the dominant color of the image.  
View files by the day of the week they were saved.  
Color  
Week  
View files by recognized faces and favorite faces.  
(Up to 20 people)  
Face  
Playback/Editing 75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Viewing photos or videos in Playback mode  
Viewing files as thumbnails  
Press [  
F
/
t
] to scroll through the files.  
4
5
Press and hold [ ] to scroll through files quickly.  
F/t  
Scan thumbnails of files.  
Press [ ] to return to the normal view.  
o
In Playback mode, rotate [Zoom] to the left to view  
thumbnails (3 at a time). Rotate [Zoom] to the left once  
or twice more to display more thumbnails (9 or 20 at a  
time). Rotate [Zoom] to the right to return to the previous  
view.  
When selecting Color, Etc appears if color is not extracted.  
It may take some time for the camera to open Smart Album, change  
the category, or reorganize files.  
Filter  
To  
Description  
Scroll through files  
Delete files  
Press [  
D
/
c
/
F
/
t
].  
Press [f  
], and then select Yes.  
Playback/Editing 76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Viewing photos or videos in Playback mode  
Protecting files  
Deleting files  
Protect your files from accidental deletion.  
Select files to delete in Playback mode.  
In Playback mode, press [  
m].  
1
2
Deleting a single file  
You can select one file, and then delete it.  
Select  
u
Protect Select.  
To protect all files, select All Lock.  
In Playback mode, select a file, and then press [  
f].  
1
Scroll to the file you want to protect, and then press  
3
When the pop-up message appears, select Yes.  
2
[
o].  
Press [o] again to cancel your selection.  
When viewing files in Smart Album or thumbnails view, press [  
f] to delete  
a file.  
Protected file icon  
Select  
Set  
Press [f].  
4
You cannot delete or rotate a protected file.  
Playback/Editing 77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Viewing photos or videos in Playback mode  
Deleting multiple files  
Deleting all files  
You can select multiple files, and then delete them at once.  
You can select all files, and then delete them at once.  
In Playback mode, press [  
f
].  
In Playback mode, press [m].  
1
2
1
2
3
When the pop-up message appears, select  
Multiple Delete.  
Select  
u
Delete All.  
When the pop-up message appears, select Yes.  
You can also delete multiple files in Playback mode by  
All unprotected files are deleted.  
pressing [m], and then selecting  
u
Delete “  
Select.  
Copying files to a memory card  
Scroll to each file you want to delete, and then press  
3
Copy files from the internal memory to a memory card.  
[
o].  
Press [o] again to cancel your selection.  
In Playback mode, press [  
m].  
1
2
3
Press [  
f].  
4
5
Select  
u
Copy to Card.  
When the pop-up message appears, select Yes.  
When the pop-up message appears, select Yes.  
Playback/Editing 78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing photos or videos in Playback mode  
To  
Description  
Viewing photos  
Enlarge part of a photo or view photos as a slide show.  
Move the enlarged area  
Press [D  
/
c
/F  
/t  
].  
Press [  
o
], and then select Yes.  
Enlarging a photo  
(The trimmed photo will be saved as a  
new file. The original photo is retained in its  
original form.)  
Trim the enlarged photo  
In Playback mode, rotate [Zoom] to the right to enlarge  
a portion of the photo. Rotate [Zoom] to the left to  
zoom out.  
When you view photos that were captured by another camera, the zoom  
ratio may differ.  
Enlarged area  
Trim  
Playback/Editing 79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Viewing photos or videos in Playback mode  
Viewing panoramic photos  
Playing a slide show  
View photos captured in Live Panorama mode.  
Apply effects and audio to a slide show of your photos. The slide  
show function does not work for videos.  
In Playback mode, press [  
panoramic photo.  
F/t] to scroll to a desired  
1
2
In Playback mode, press [  
m].  
1
2
3
The entire panoramic photo appears on the screen.  
Select  
C.  
Press [ ].  
o
Select a slide show effect option.  
The camera automatically scrolls through the photo from left to  
right for a horizontal panoramic photo and from top to bottom  
for a vertical panoramic photo. The camera then switches to  
Playback mode.  
Skip to step 4 to start a slide show with no effects.  
* Default  
Option  
Description  
Set whether or not to repeat the slide show.  
(Play, Repeat)  
While playing back a panoramic photo, press [  
or resume.  
o] to pause  
Start  
After you have paused the playback of a panoramic photo,  
press [ ] to move the photo horizontally or  
Set the photos you want to view as a slide show.  
D
/
c
/F/  
t
All*: View all photos in a slide show.  
vertically, depending on the direction you moved when  
capturing the photo.  
Images  
Date: View photos captured on a specific date  
in a slide show.  
Select: View selected photos in a slide show.  
Press [m] to return to Playback mode.  
3
Set the interval between photos.  
(1 sec*, 3 sec, 5 sec, 10 sec)  
The camera automatically scrolls through the panoramic photo only if the  
longest side of the photo is two or more times longer than the shortest side.  
Interval  
You must set the Effect option to Off to set the  
interval.  
Playback/Editing 80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Viewing photos or videos in Playback mode  
* Default  
Playing a video  
Option  
Music  
Description  
In Playback mode, you can view a video, and then capture parts  
of the playing video. You can save the captured segments as  
new files.  
Set background audio.  
Set a scene change effect between photos.  
(Off*, Calm, Shine, Relax, Lively, Sweet)  
In Playback mode, select a video, and then press [  
o].  
1
2
Effect  
Select Off to cancel effects.  
When you use the Effect option, the interval  
between photos will be set to 1 second.  
View the video.  
Select Start Play.  
4
5
Select Repeat to loop the slide show.  
View the slide show.  
Press [  
Press [  
o
o
] to pause the slide show.  
] again to resume the slide show.  
Pause  
Stop  
Press [  
to Playback mode.  
Rotate [Zoom] to the left or right to adjust the volume level.  
o], and then press [F/t] to stop the slide show and return  
To  
Description  
Scan backward  
Press [  
Press [  
Press [  
F].  
Pause or resume  
playback  
o
].  
Scan forward  
t
].  
Adjust the volume level  
Rotate [Zoom] to the left or right.  
Playback/Editing 81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Viewing photos or videos in Playback mode  
Capturing an image from video  
While viewing a video, press [  
want to capture an image.  
o] at the point where you  
1
2
Press [c].  
The resolution of the captured image will be the same as the original  
video.  
The captured image is saved as a new file.  
Playback/Editing 82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Editing a photo  
Learn how to edit photos.  
The camera will save edited photos as new files.  
When you edit photos, the camera will automatically convert them to a lower resolution. Photos that you rotate or resize manually are not automatically converted to  
a lower resolution.  
You cannot edit the panoramic photos.  
Resizing photos  
Rotating a photo  
Change the size of a photo and save it as a new file. You can also  
select a photo to be displayed when the camera turns on.  
In Playback mode, select a photo, and then press  
1
[
m
].  
In Playback mode, select a photo, and then press  
1
Select  
eRotate.  
[m  
].  
2
3
Select an option.  
Select  
eResize.  
2
3
Select an option.  
Select Start Image to save the photo as a start image.  
Right 90˚  
(p. 99)  
1984 X 1488  
Back  
Move  
The camera will overwrite the original file.  
Back  
Move  
Available resize options differ depending on the original size of the photo.  
Playback/Editing 83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Editing a photo  
Creating a close-up portrait  
Extract the face of an individual subject from an existing photo.  
Applying Smart Filter effects  
Apply special effects to your photos.  
In Playback mode, select a photo, and then  
In Playback mode, select a photo, and then press  
1
1
press [m  
].  
[
m
].  
Select  
e
Intelligent Portrait.  
Select  
eSmart Filter.  
2
3
2
3
Select Save to crop the photo around the detected face.  
Select an effect.  
2 cropped portraits are saved with consecutive file names.  
Miniature  
Back  
Save  
Move  
Back  
Move  
Icon  
Description  
Normal: No effect  
The Intelligent Portrait feature will not function if:  
-
-
-
no face is detected  
more than 2 faces are detected  
the detected facial area is larger than a certain ratio  
Miniature: Apply a tilt-shift effect to make the subject  
appear in miniature.  
Playback/Editing 84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Editing a photo  
Icon  
Description  
Adjusting your photos  
Learn how to correct red-eye, adjust the skin tone, and adjust the  
brightness, contrast, or saturation. If the center of a photo is dark,  
you can adjust it to be brighter. The camera will save an edited  
photo as a new file, but may convert it to a lower resolution.  
Vignetting: Apply the retro-looking colors, high  
contrast, and strong vignette effect of Lomo cameras.  
Soft Focus: Hide facial imperfections or apply dreamy  
effects.  
Old Film 1: Apply a vintage film effect 1.  
Old Film 2: Apply a vintage film effect 2.  
Half Tone Dot: Apply a halftone effect.  
Sketch: Apply a pen sketch effect.  
Adjusting dark subjects (ACB)  
In Playback mode, select a photo, and then  
1
press [  
Select  
Press [  
m].  
e
o
Image Adjust ACB.  
2
3
Fish-eye: Blacken the edges of the frame and distort  
objects to imitate the visual effect of a fisheye lens.  
] to save your settings.  
Defog: Make image clearer.  
Classic: Apply a black and white effect.  
Retro: Apply a sepia tone effect.  
Negative: Apply a negative film effect.  
Playback/Editing 85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Editing a photo  
Removing red-eye  
Adjusting brightness, contrast, or saturation  
In Playback mode, select a photo, and then  
In Playback mode, select a photo, and then  
1
1
press [  
Select  
Press [  
m
].  
press [m  
].  
e
o
Image Adjust Red-eye Fix.  
Select  
e
Image Adjust.  
2
3
2
3
] to save your settings.  
Select an adjusting option.  
Icon  
Description  
Brightness  
Retouching faces  
Contrast  
In Playback mode, select a photo, and then  
1
Saturation  
press [  
Select  
Press [  
Press [  
m
].  
Image Adjust Face Retouch.  
].  
e
Press [  
Press [  
Press [  
o
].  
2
3
4
4
5
6
o
F
/
t
] to adjust the option.  
F/t] to adjust the skin tone.  
o
] to save your settings.  
As the number increases, the skin tone appears brighter and  
smoother.  
Press [o] to save your settings.  
5
Playback/Editing 86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Editing a photo  
Adding noise to the photo  
Scroll to a photo you want to print, rotate [Zoom] to the  
left or right to select the number of copies, and then  
3
In Playback mode, select a photo, and then  
1
press [  
If you select All, press [  
copies, and then press [  
f].  
press [  
Select  
Press [  
m].  
D/c] to select the number of  
o].  
e
o
Image Adjust Add Noise.  
2
3
Press [m  
].  
4
5
] to save your settings.  
Select  
u
DPOF Size Select.  
Select All to choose the print size for all photos.  
Scroll to a photo you want to print, rotate [Zoom] to the  
6
Creating a print order (DPOF)  
left or right to select the print size, and then press [  
If you select All, press [ ] to select the print size, and  
then press [ ].  
f].  
Select photos to print and save print options in the Digital Print  
Order Format (DPOF). This information is saved in the MISC  
folder on your memory card for convenient printing on DPOF-  
compatible printers.  
D/c  
o
In Playback mode, press [  
m
].  
1
2
Select  
u
DPOF Standard Select.  
Select All to print all photos.  
Playback/Editing 87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Editing a photo  
Printing photos as thumbnails  
Print photos as thumbnails to check all the photos at once.  
In Playback mode, press [  
m].  
1
2
3
Select  
u
DPOF Index.  
When the pop-up message appears, select Yes.  
You can take the memory card to a print shop that supports DPOF  
(Digital Print Order Format) or you can print photos directly through a  
DPOF-compatible printer at home.  
Photos with dimensions that are wider than the paper may be cut off  
on the left and right edges. Ensure that your photo dimensions are  
compatible with the paper you select.  
You cannot set DPOF options for photos stored in the internal  
memory.  
If you specify the print size, you can print photos only with  
DPOF 1.1-compatible printers.  
Playback/Editing 88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing files on a TV  
Play back photos or videos by connecting your camera to a TV with the A/V cable.  
In Shooting or Playback mode, press [  
m
].  
Turn on your TV, and then select the A/V video source  
with the TV remote control.  
1
2
3
6
7
Select  
n
Video Out.  
Turn on your camera.  
Select the video signal output for your country or region.  
(p. 102)  
The camera automatically enters into Playback mode when  
you connect it to a TV.  
Turn off your camera and TV.  
4
5
View photos or play videos using the camera buttons.  
8
Connect your camera to your TV with the A/V cable.  
Depending on the TV model, you may see some digital noise or part  
of an image may not appear.  
Images may not be centered on the TV screen depending on your  
TV settings.  
Audio  
Video  
Playback/Editing 89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Transferring files to your Windows computer  
Transfer files to your Windows computer, edit them with Intelli-studio, and upload them to the web.  
Requirements  
The requirements are recommendation only. Intelli-studio may not work  
properly even when the computer meets the requirements, depending  
on the condition of your computer.  
If your computer does not meet the requirements, videos may not play  
correctly or it may take longer to edit videos.  
Install DirectX 9.0c or later before you use Intelli-studio.  
Your computer must be running Windows XP, Windows Vista, or  
Windows 7 for you to connect the camera as a removable disk.  
Item  
CPU  
RAM  
OS*  
Requirements  
Intel® Pentium®4 3.2 GHz or higher/  
AMD Athlon™ FX 2.6 GHz or higher  
Minimum 512 MB RAM (1 GB or more recommended)  
Windows XP SP2, Windows Vista, or Windows 7  
(32-bit editions)  
Hard disk  
capacity  
250 MB or more (1 GB and above recommended)  
The manufacturer is not responsible for any damage that results from using  
unqualified computers such as a computer you assembled yourself.  
CD-ROM drive  
1024 X 768 pixels, 16-bit color display compatible  
monitor (1280 X 1024 pixels, 32-bit color display  
recommended)  
Others  
USB 2.0 port  
nVIDIA Geforce 7600GT or higher/  
ATI X1600 series or higher  
Microsoft DirectX 9.0c or higher  
* A 32-bit version of Intelli-studio will be installed—even on 64-bit editions of  
Windows XP, Windows Vista, and Windows 7.  
Playback/Editing 90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Transferring files to your Windows computer  
Turn on the camera.  
5
6
Transferring files with Intelli-studio  
When the Intelli-studio installation pop-up appears on the  
computer screen, follow the on-screen instructions to  
complete the installation.  
You can download Intelli-studio from the linked webpage and  
install it on your computer. When you connect the camera to  
a computer with Intelli-studio installed, the program will launch  
automatically.  
Once the Intelli-studio is installed on your computer, the  
computer recognizes the camera and launches the  
Intelli-studio automatically.  
The battery will charge while the camera is connected to a computer with the  
USB cable.  
If you set the USB option to Select Mode, select Computer in the  
pop-up window.  
In Shooting or Playback mode, press [  
m].  
1
2
3
4
Select a destination folder on your computer, and then  
select Yes.  
Select  
n
PC Software On.  
Turn off the camera.  
New files stored on the camera will automatically transfer to  
the selected folder.  
If your camera has no new files, the pop-up window for saving  
new files will not appear.  
Connect the camera to your computer with the  
USB cable.  
You must plug the small end of the USB cable into your camera. If the  
cable is reversed, it may damage your files. The manufacturer is not  
responsible for any loss of data.  
For Windows Vista and Windows 7, select Run iLinker.exe from the Auto  
Play window to start Intelli-studio. If Run iLinker.exe does not appear on  
the computer, click  
Computer Intelli-studio, and then follow the  
on-screen instructions to complete the Intelli-studio installation.  
Playback/Editing 91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Transferring files to your Windows computer  
Using Intelli-studio  
Intelli-studio allows you to play back and edit files. For details, select Help Help from the program toolbar.  
You can update the firmware of your camera by selecting Web Support Upgrade firmware for the connected device from the program toolbar.  
You cannot edit files directly on the camera. Transfer files to a folder on your computer before editing.  
Intelli-studio supports the following formats:  
-
-
Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG)  
Photos: JPG, GIF, BMP, PNG, TIFF  
1
2
3
4
5
6
7
%
$
8
#
9
0
@
!
Playback/Editing 92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Transferring files to your Windows computer  
No.  
Description  
Transferring files by connecting the camera  
as a removable disk  
1
Open menus.  
2
3
4
Connect the camera to your computer as a removable disk.  
Display files in the selected folder.  
Switch to the Photo edit mode.  
Switch to the Video edit mode.  
In Shooting or Playback mode, press [  
m].  
1
2
3
4
Select  
n
PC Software Off.  
Switch to the Sharing mode (to send files by email or  
upload files to websites, such as Flickr or YouTube).  
5
Turn off the camera.  
6
7
8
9
0
!
@
#
$
Enlarge or reduce the thumbnails in the list.  
Select a file type.  
Connect the camera to your computer with the  
USB cable.  
View files in the selected folder on your computer.  
Show or hide files on the connected camera.  
View files in the selected folder on the camera.  
View files as thumbnails or on a map.  
Browse folders stored on the camera.  
Browse folders stored on your computer.  
Move to the previous or next folder.  
You must plug the small end of the USB cable into your camera. If the  
cable is reversed, it may damage your files. The manufacturer is not  
responsible for any loss of data.  
Print files, view files on a map, store files in My Folder, or  
register faces.  
%
Playback/Editing 93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Transferring files to your Windows computer  
Turn on the camera.  
5
Disconnecting the camera (for Windows XP)  
With Windows Vista and Windows 7, the methods for  
disconnecting the camera are similar.  
The computer recognizes the camera automatically.  
If you set the USB option to Select Mode, select Computer in the  
pop-up window.  
Verify that the status lamp is not blinking.  
1
The status lamp blinks when transferring files. Wait until it  
stops.  
On your computer, select My Computer “  
6
7
Removable Disk DCIM 100PHOTO.  
Click  
computer screen.  
on the tool bar at the bottom right of your  
2
Drag or save files to your computer.  
Click the pop-up message.  
3
4
Click the message box that indicates the camera can be  
removed safely.  
Remove the USB cable.  
5
The camera may not disconnect safely while Intelli-studio is running. End the  
program before disconnecting the camera.  
Playback/Editing 94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Transferring files to your Mac computer  
When you connect the camera to a Macintosh computer, the computer will automatically recognize the device. You can transfer files directly  
from the camera to the computer without installing any programs.  
Mac OS 10.4 or later is supported.  
Turn off the camera.  
Turn on the camera.  
1
2
3
The computer recognizes the camera automatically and  
displays a removable disk icon.  
Connect your camera to a Macintosh computer with the  
USB cable.  
If you set the USB option to Select Mode, select Computer in the  
pop-up window.  
You must plug the small end of the USB cable into your camera. If the  
cable is reversed, it may damage your files. The manufacturer is not  
responsible for any loss of data.  
Double-click the removable disk icon.  
Drag or save files to your computer.  
4
5
Playback/Editing 95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Printing photos with a PictBridge photo printer  
Print photos with a PictBridge-compatible printer by connecting your camera directly to the printer.  
Configuring print settings  
In Shooting or Playback mode, press [  
m].  
1
2
3
Select  
n
USB Printer.  
Press [  
m
] to configure print settings.  
Turn on the printer, and then connect your camera to the  
printer with the USB cable.  
One Photo  
Auto  
Images  
Size  
Auto  
Layout  
Type  
Auto  
Auto  
Quality  
Exit  
Print  
If the camera is off, press [POWER] or [  
P
] to turn it on.  
4
5
Option  
Description  
The printer recognizes the camera automatically.  
Images  
Size  
Select whether to print the current photo or all photos.  
Set the print size.  
Press [ ] to select a file to print.  
F/t  
Press [ ] to set printing options.  
m
Set the number of photos to be printed on a single  
sheet of paper.  
Layout  
See “Configuring print settings”.  
Press [ ] to print.  
Printing starts. Press [F] to cancel printing.  
Type  
Set the type of paper.  
o
6
Quality  
Date Print  
File Name  
Reset  
Set the print quality.  
Set to print the date.  
Set to print the file name.  
Reset settings to their default values.  
Some options may not be supported by some printers.  
Playback/Editing 96  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Settings menu  
Learn to configure your camera's settings.  
Select an item.  
Accessing the settings menu  
3
4
Volume  
Medium  
In Shooting or Playback mode, press [  
m].  
1
Start Sound  
Shutter Sound  
Beep Sound  
AF Sound  
Off  
1
Select a menu.  
2
1
On  
Volume  
Shooting  
Sound  
Start Sound  
Shutter Sound  
Beep Sound  
AF Sound  
Exit  
Back  
Display  
Settings  
Select an option.  
Exit  
Change  
Volume  
Off  
Start Sound  
Shutter Sound  
Beep Sound  
AF Sound  
Low  
Option  
O
Description  
Medium  
High  
Sound: Set various camera sounds and the volume.  
(p. 99)  
i
Display: Customize the display settings. (p. 99)  
Settings: Customize the settings for the camera  
system. (p. 100)  
n
Back  
Set  
Press [m] to return to the previous screen.  
5
Settings 98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Settings menu  
Sound  
Display  
* Default  
* Default  
Item  
Description  
Item  
Description  
Set the volume of all sounds.  
(Off, Low, Medium*, High)  
Function  
Description  
Display a brief description of an option or a menu.  
(Off, On*)  
Volume  
Set the sound the camera emits when you turn on  
your camera. (Off*, 1, 2, 3)  
Set a start image to display when the camera  
turns on.  
Start Sound  
Shutter Sound  
Beep Sound  
AF Sound  
Off*: Display no start image.  
Set the sound the camera emits when you press  
the shutter button. (Off, 1*, 2, 3)  
Logo: Display a default image stored in the  
internal memory.  
Set the sound the camera emits when you press  
the buttons or switch modes. (Off, 1*, 2, 3)  
User Image: Select User Image from the  
Start Image  
photos you captured in the memory. (p. 83)  
Set to emit a sound when you half-press the  
shutter button. (Off, On*)  
The camera will save only one User Image in the  
internal memory at a time.  
If you select a new photo as a User Image or  
reset your camera, the camera will delete the  
current image.  
Set a wallpaper image for the Mode and Menu  
screens.  
Wallpapers  
Date/Time  
Display  
Set whether or not to display the date and time on  
the camera's display. (Off*, On)  
Settings 99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Settings menu  
* Default  
Settings  
Item  
Description  
* Default  
Adjust the brightness of the screen.  
(Auto*, Dark, Normal, Bright)  
Item  
Description  
Display  
Brightness  
Format the internal memory and the memory card.  
Formatting will delete all files, including protected  
files. (Yes, No)  
Normal is fixed in Playback mode even if you have  
selected Auto.  
Set whether or not to review a captured image  
before returning to the Shooting mode. (Off, On*)  
Format  
Errors can occur if you use a memory card formatted by  
another brand of camera, a memory card reader, or a  
computer. Please format memory cards in the camera  
before using them to capture photos.  
Quick View  
Power Save  
If you perform no operations for 30 seconds, the  
camera automatically switches to Power Save  
mode. (Off*, On)  
Reset menus and shooting options. Date and  
times, language, and video output settings will not  
be reset. (Yes, No)  
In Power Save mode, press any button other  
than [POWER] to resume using the camera.  
Even if you do not set the Power Save mode,  
the screen will dim 30 seconds after the last  
operation to save power.  
Reset  
Language  
Time Zone  
Date/Time Set  
Set a language for the display text.  
Set the time zone for your location. When you  
travel to another country, select the appropriate  
time zone.  
Set the date and time.  
Set a date format. (YYYY/MM/DD,  
MM/DD/YYYY, DD/MM/YYYY)  
Date Type  
The default date type may differ depending on the  
language selected.  
Settings 100  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Settings menu  
* Default  
* Default  
Item  
Description  
Item  
Description  
Specify how to name files.  
Set whether or not to display the date and time on  
Reset: Set the file number to start from 0001  
captured photos. (Off*, Date, Date & Time)  
when you insert a new memory card, format a  
memory card, or delete all files.  
The date and time will be displayed on the  
bottom right corner of the photo.  
Some printer models may not print the date and  
time properly.  
Series*: Set the file number to resume from  
the previous file number when you insert a new  
memory card, format a memory card, or delete  
all files.  
Imprint  
The photo will not display the date and time if:  
-
you select Intelligent Portrait, Funny Face,  
or Text in  
you select  
you select  
s
N
d
mode  
mode  
mode  
The default name of the first folder is 100PHOTO  
and the default name of the first file is  
SAM_0001.  
The file number increases by one, from  
SAM_0001 to SAM_9999, each time you take  
a picture.  
The folder number increases by one, from  
100PHOTO to 999PHOTO, each time a folder  
is full.  
-
-
File No.  
Set the camera to automatically turn off when you  
perform no operations for a specified period.  
(Off, 1 min, 3 min*, 5 min, 10 min)  
Your settings will not change when you replace  
the battery.  
The camera will not automatically turn off when  
the camera is connected to a computer or printer,  
and when you are playing a slide show or videos.  
Auto Power Off  
The maximum number of files that can be stored  
in one folder is 9,999.  
The camera defines file names according to  
the Design rule for Camera File system (DCF)  
standard. If you intentionally change file names,  
the camera may not play back the files.  
Settings 101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Settings menu  
* Default  
Item  
Description  
Set the video signal output for your region.  
NTSC: USA, Canada, Japan, Korea, Taiwan,  
Mexico  
PAL (supports only BDGHI): Australia, Austria,  
Belgium, China, Denmark, England, Finland,  
France, Germany, Italy, Kuwait, Malaysia,  
Netherlands, New Zealand, Norway, Singapore,  
Spain, Sweden, Switzerland, Thailand  
Video Out  
AF Lamp  
USB  
Set a light to automatically turn on in dark places  
to help you focus. (Off, On*)  
Select the mode to use when you connect the  
camera to a computer or printer with a USB cable.  
Computer*: Connect your camera to a  
computer for transferring files.  
Printer: Connect your camera to a printer for  
printing files.  
Select Mode: Manually select the USB mode  
when you connect your camera to a device.  
Set Intelli-studio to launch automatically when you  
connect your camera to your computer. (Off, On*)  
PC Software  
Open source  
licenses  
Show the Open source licenses information.  
Settings 102  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Error messages  
When the following error messages appear, try these remedies.  
Error message  
Card Error  
Suggested remedies  
Error message  
File Error  
Suggested remedies  
Turn off your camera, and then turn it on  
again.  
Delete the damaged file or contact a service  
center.  
Remove your memory card, and then insert  
it again.  
Your camera does not support the FAT file  
structure of the inserted memory card. Format  
the memory card on the camera.  
File system not  
supported.  
Format your memory card.  
The inserted memory card is not supported by  
your camera. Insert a microSD or microSDHC  
memory card.  
Low Battery  
Memory Full  
Insert a charged battery or recharge the battery.  
Card not  
supported.  
Delete unnecessary files or insert a new memory  
card.  
File names do not match the DCF standard.  
Transfer the files from the memory card to your  
computer and format the card. Then, open the  
Settings menu and select File No. Reset.  
(p. 101)  
Capture photos or insert a memory card that  
contains some photos.  
No Image File  
DCF Full Error  
Appendixes 104  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Camera maintenance  
Camera body  
Cleaning your camera  
Wipe gently with a soft, dry cloth.  
Camera lens and display  
Use a blower brush to remove dust and wipe the lens gently with  
a soft cloth. If any dust remains, apply lens cleaning liquid to a  
piece of lens cleaning paper and wipe gently.  
Never use benzene, thinners, or alcohol to clean the device. These  
solutions can damage the camera or cause it to malfunction.  
Do not press on the lens cover or use a blower brush on the lens  
cover.  
Appendixes 105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Camera maintenance  
Storing for extended period of time  
Using or storing the camera  
When you store the camera for an extended period, place it in a  
sealed container with an absorbent material, such as silica gel.  
Inappropriate places to use or store the camera  
Remove the batteries from your camera when storing it for an  
extended period. Installed batteries may leak or corrode over  
time and cause serious damage to your camera.  
Avoid exposing the camera to very cold or very hot  
temperatures.  
Avoid using your camera in areas with extremely high humidity,  
or where the humidity changes drastically.  
Over time, unused batteries will discharge and must be  
recharged before use.  
Avoid exposing the camera to direct sunlight and storing it in  
hot, poorly-ventilated areas, such as in a car during summer  
time.  
The present date and time can be initialized when the camera  
is turned on after the camera and battery have been separated  
for over 40 hours.  
Protect your camera and the display from impact, rough  
handling, and excessive vibration to avoid serious damage.  
Avoid using or storing your camera in dusty, dirty, humid, or  
poorly-ventilated areas to prevent damage to moving parts and  
internal components.  
Using the camera with caution in humid environments  
When you transfer the camera from a cold environment to a warm  
one, condensation can form on the lens or internal components  
of the camera. In this situation, turn off the camera and wait for at  
least 1 hour. If condensation forms on the memory card, remove  
the memory card from the camera and wait until all moisture has  
evaporated before reinserting it.  
Do not use your camera near fuels, combustibles, or flammable  
chemicals. Do not store or carry flammable liquids, gases, or  
explosive materials in the same compartment as the camera or  
its accessories.  
Do not store the camera where there are mothballs.  
Other cautions  
Using on beaches or shores  
Do not swing your camera by the strap. This may cause injury  
to yourself or others or damage to your camera.  
Protect your camera from sand and dirt when you use it on  
beaches or in other similar areas.  
Do not paint your camera, as paint can clog moving parts and  
prevent proper operation.  
Your camera is not waterproof. Do not handle the battery,  
adapter, or memory card with wet hands. Operating the camera  
with wet hands may cause damage to your camera.  
Turn off the camera when not using it.  
Appendixes 106  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Camera maintenance  
Your camera contains delicate parts. Avoid impacts to the  
camera.  
Paint or metal on the outside of the camera may cause  
allergies, itchy skin, eczema, or swelling for people with  
sensitive skin. If you experience any of these symptoms, stop  
using the camera immediately and consult a doctor.  
Protect the display from external force by keeping it in the case  
when not in use. Protect the camera from scratches by keeping  
it away from sand, sharp implements, or loose change.  
Do not insert foreign objects into any of your camera’s  
compartments, slots, or access points. Damage due to  
improper use may not be covered by your warranty.  
Do not use the camera if the screen is cracked or broken.  
Broken glass or acrylic could cause injury to your hands and  
face. Take the camera to a Samsung service center to have it  
repaired.  
Do not allow unqualified personnel to service the camera or  
attempt to service the camera yourself. Any damage that results  
from unqualified service is not covered by your warranty.  
Never place cameras, batteries, chargers, or accessories near,  
on, or in heating devices, such as microwave ovens, stoves, or  
radiators. These devices may be deformed and can overheat  
and cause a fire or explosion.  
Do not expose the lens to direct sunlight, as this may discolor  
the image sensor or cause it to malfunction.  
About memory cards  
Protect the lens from fingerprints and scratches. Clean the lens  
with a soft, clean, debris-free lens cloth.  
Supported memory cards  
Your camera supports microSD (Secure Digital) or microSDHC  
(Secure Digital High Capacity) memory cards.  
The camera may turn off if struck or dropped. This is to protect  
the memory card. Turn on the camera to use it again.  
To read data with a PC or memory card reader,  
insert the memory card into a memory card  
adapter.  
While you use the camera, it may heat up. This is normal and  
should not affect your camera’s lifespan or performance.  
When you use the camera in low temperatures, it may take  
some time to turn on, the color of the display may be changed  
temporarily, or after-images may appear. These conditions are  
not malfunctions and they will correct themselves when the  
camera is returned to milder temperatures.  
Appendixes 107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Camera maintenance  
Memory card capacity  
Videos  
The memory capacity may differ depending on shooting scenes  
or shooting conditions. These capacities are based on a 1 GB  
microSD card:  
Size  
30 FPS  
15 FPS  
Approx. 4' 03"  
Approx. 7' 31"  
Approx. 9' 20"  
Approx. 33' 21"  
Approx. 18' 04"  
Approx. 60' 31"  
Photos  
Size  
Super Fine  
Fine  
Normal  
* The figures above are measured without using the zoom function. Available  
recording time may vary if you use the zoom. Several videos were recorded  
in succession to determine the total recording time.  
106  
210  
308  
122  
142  
238  
280  
349  
412  
168  
328  
477  
325  
617  
873  
531  
970  
1,358  
1,909  
3,055  
873  
1,455  
2,546  
1,608  
Appendixes 108  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Camera maintenance  
Prevent memory cards from making contact with liquids, dirt, or  
foreign substances. If dirty, wipe the memory card clean with a  
soft cloth before you insert the memory card into your camera.  
Cautions when using memory cards  
Avoid exposing memory cards to very cold or very hot  
temperatures (below 0 °C/32 °F or above 40 °C/104 °F).  
Extreme temperatures can cause memory cards to malfunction.  
Do not allow liquids, dirt, or foreign substances to come in  
contact with memory cards or the memory card slot. Doing so  
may cause memory cards or the camera to malfunction.  
Insert a memory card in the correct direction. Inserting a  
memory card in the wrong direction may damage your camera  
and memory card.  
When you carry a memory card, use a case to protect the card  
from electrostatic discharges.  
Do not use memory cards that have been formatted by other  
cameras or by a computer. Reformat the memory card with  
your camera.  
Transfer important data to other media, such as a hard disk,  
CD, or DVD.  
When you use the camera for an extended period, the memory  
card may become warm. This is normal and does not indicate  
a malfunction.  
Turn off the camera before you insert or remove the memory  
card.  
Do not remove the memory card or turn off your camera while  
the lamp is blinking, as this may damage your data.  
The manufacturer is not responsible for any loss of data.  
When the lifespan of a memory card has expired, you cannot  
store any more photos on the card. Use a new memory card.  
Do not bend, drop, or subject memory cards to heavy impact  
or pressure.  
Avoid using or storing memory cards near strong magnetic  
fields.  
Avoid using or keeping memory cards in areas with high  
temperature, high humidity, or corrosive substances.  
Appendixes 109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Camera maintenance  
Battery life  
About the battery  
Use only Samsung-approved batteries.  
Average shooting time/  
Number of photos  
Test conditions  
(when the battery is fully charged)  
Battery specifications  
The battery life was measured under  
the following conditions: in  
p
mode,  
Specification  
Model  
Description  
in darkness,  
DIS on.  
resolution, Fine quality,  
BP70A  
Type  
Lithium-ion battery  
700 mAh  
3.7 V  
1. Set the flash option to Fill in, take a  
single shot, and zoom in or out.  
2. Set the flash option to Off, take a  
single shot, and zoom in or out.  
3. Perform steps 1 and 2, waiting  
30 seconds between each step.  
Repeat the process for 5 minutes,  
and then turn off the camera for  
1 minute.  
Approximately  
140 min/  
Approximately  
280 photos  
Cell capacity  
Voltage  
Photos  
Charging time*  
(when the camera is switched off)  
Approximately 160 min  
* Charging the battery by connecting it to a computer may take longer.  
4. Repeat steps 1 to 3.  
Approximately  
Videos  
Record videos at  
30 FPS.  
resolution and  
110 min  
The figures above are measured by Samsung’s standards. Your results may  
differ, depending on your actual usage.  
Several videos were recorded in succession to determine the total recording  
time.  
Appendixes 110  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Camera maintenance  
Low battery message  
Cautions about using the battery  
When the battery has fully discharged, the battery icon will turn  
red and the "Low Battery" message will appear.  
Protect batteries, chargers, and memory cards from  
damage  
Prevent batteries from making contact with metal objects, as this  
can create a connection between the + and – terminals of your  
battery and lead to temporary or permanent battery damage and  
may cause a fire or electric shock.  
Notes about using the battery  
Avoid exposing batteries to very cold or very hot temperatures  
(below 0 °C/32 °F or above 40 °C/104 °F). Extreme  
temperatures can reduce the charging capacity of your  
batteries.  
Notes about charging the battery  
If the status lamp is off, make sure that the battery is inserted  
correctly.  
When you use the camera for an extended period, the area  
around the battery chamber may become warm. This does not  
affect the normal use of the camera.  
If the camera is on while charging, the battery may not fully  
charge. Turn off the camera before charging the battery.  
Do not pull the power supply cord to disconnect the plug from  
the power outlet, as this may cause a fire or electric shock.  
Do not use your camera when you are charging the battery.  
This may cause a fire or electric shock.  
In temperatures below 0 °C/32 °F, battery capacity and battery  
life may decrease.  
Do not pull the power supply cord to disconnect the plug from  
the power outlet, as this may cause a fire or electric shock.  
Battery capacity may decrease in low temperatures but will  
return to normal in milder temperatures.  
Let the battery charge for at least 10 minutes before turning on  
the camera.  
If you connect the camera to an external power source when  
the battery is depleted, using high energy-consuming functions  
will cause the camera to turn off. To use the camera normally,  
recharge the battery.  
Appendixes 111  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Camera maintenance  
If you reconnect the power cable when the battery is fully  
charged, the status lamp turns on for approximately 30 minutes.  
Handling and disposing of batteries and chargers  
with care  
Using the flash or recording videos depletes the battery quickly.  
Charge the battery until the red status lamp turns off.  
Never dispose of batteries in a fire. Follow all local regulations  
when you dispose of used batteries.  
If the status lamp blinks in red, reconnect the cable, or remove  
the battery and insert it again.  
Never place batteries or cameras on or in heating devices,  
such as microwave ovens, stoves, or radiators. Batteries may  
explode when they are overheated.  
If you charge the battery when the cable is overheated or  
the temperature is too high, the status lamp may blink in red.  
Charging will start when the battery cools down.  
Overcharging batteries may shorten battery life. After charging is  
finished, disconnect the cable from your camera.  
Do not bend or place heavy objects on the AC cable. Doing so  
may damage the cable.  
Notes about charging with a computer connected  
Use only the provided USB cable.  
The battery may not charge when:  
-
-
-
you use a USB hub  
other USB devices are connected to your computer  
you connect the cable to the port on the front side of your  
computer  
-
the USB port of your computer does not support the power output  
standard (5 V, 500 mA)  
Appendixes 112  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Camera maintenance  
Personal injury or death can occur if the battery is  
handled carelessly or improperly. For your safety,  
follow these instructions for proper battery handling:  
Do not disassemble or puncture the battery with any  
sharp object.  
Avoid exposing the battery to high pressure or crushing  
forces.  
The battery can ignite or explode if not handled properly.  
If you notice any deformities, cracks, or other  
Avoid exposing the battery to major impacts, such as  
dropping it from high places.  
abnormalities in the battery, immediately discontinue use  
of the battery and contact a service center.  
Do not expose the battery to temperatures of 60 °C  
(140 °F) or above.  
Use only authentic, manufacturer-recommend battery  
chargers and adapters and charge the battery only by the  
methods described in this user manual.  
Do not allow the battery to come in contact with  
moisture or liquids.  
Do not place the battery near heating devices or expose  
it to excessively warm environments, such as the inside  
of an enclosed car in the summertime.  
Do not expose the battery to sources of excessive heat  
such as sunshine, fire or the like.  
Do not place the battery in a microwave oven.  
Disposal guidelines  
Avoid storing or using the battery in hot, humid places,  
such as spas or shower enclosures.  
Dispose of the battery with care.  
Do not dispose of the battery in a fire.  
Do not rest the camera on flammable surfaces, such as  
bedding, carpets, or electric blankets for a prolonged  
period.  
Disposal regulations may differ by country or region.  
Dispose of the battery in accordance with all local and  
federal regulations.  
When the camera is switched on, do not leave it in any  
confined space for a prolonged period.  
Guidelines for charging the battery  
Charge the battery only by the method described in  
this user manual. The battery can ignite or explode if  
not charged properly.  
Do not allow battery terminals to come in contact with  
metallic objects, such as necklaces, coins, keys, or  
watches.  
Use only authentic, manufacturer-recommended,  
Lithium-ion replacement batteries.  
Appendixes 113  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before contacting a service center  
If you are having trouble with your camera, try these troubleshooting procedures before you contact a service center. If you have attempted  
the suggested remedy and are still having problems with your device, contact your local dealer or service center.  
When you leave your camera at a service center, be sure to also leave the other components that may have contributed to the malfunction, such as the memory card and battery.  
Situation  
Suggested remedies  
Situation  
Suggested remedies  
Ensure that the battery is inserted.  
There is no space on the memory card.  
Delete unnecessary files or insert a new  
card.  
Cannot turn on the  
camera  
Ensure that the battery is inserted  
correctly. (p. 17)  
Format the memory card.  
Charge the battery.  
Charge the battery.  
The memory card is defective. Get a new  
memory card.  
Cannot capture photos  
Your camera may be in Auto Power Off  
mode. (p. 101)  
Make sure that the camera is switched  
on.  
The power turns off  
suddenly  
The camera may turn off to prevent the  
memory card from being damaged due  
to an impact. Turn on your camera again.  
Charge the battery.  
Make sure that the battery is inserted  
correctly.  
The battery may lose power more quickly  
in low temperatures (below 0 °C/32 °F).  
Keep the battery warm by putting it into  
your pocket.  
The camera freezes  
The camera heats up  
Remove the battery and insert it again.  
While you use the camera, it may heat up.  
This is normal and should not affect your  
camera’s lifespan or performance.  
The camera is losing  
battery power quickly  
Using the flash or recording videos  
depletes the battery quickly. Recharge  
if needed.  
The flash option may be set to Off.  
(p. 52)  
The flash does not  
work  
Batteries are consumable parts that must  
be replaced over time. Get a new battery  
if the battery life is diminishing quickly.  
You cannot use the flash in some modes.  
Appendixes 114  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Before contacting a service center  
Situation  
Suggested remedies  
Situation  
Suggested remedies  
The flash fires  
unexpectedly  
The flash may fire due to static electricity.  
The camera is not malfunctioning.  
Make sure that the focus option you set  
is suitable for close-up shots. (p. 55)  
Make sure that the lens is clean. If not,  
clean the lens. (p. 105)  
The date and time are  
incorrect  
Set the date and time in the display settings.  
(p. 100)  
The photo is blurry  
Make sure that the subject is within range  
of the flash. (p. 118)  
The display or buttons  
do not work  
Remove the battery, and then insert it again.  
An incorrect White Balance can create  
unrealistic color. Select the proper White  
Balance option to suit the light source.  
(p. 66)  
If you use your camera at very low  
The colors in the photo  
do not match the actual  
scene  
temperatures, it may cause the camera  
screen to malfunction or discolor. For better  
performance of your camera screen, use  
your camera in moderate temperatures.  
The camera display  
responds poorly  
Your photo is overexposed.  
Turn off the flash. (p. 52)  
Turn off your camera, and then turn it  
on again.  
The photo is too bright  
The photo is too dark  
Adjust the ISO sensitivity. (p. 54)  
Adjust the exposure value. (p. 63)  
Remove your memory card, and then  
insert it again.  
The memory card has  
an error  
Your photo is underexposed.  
Format your memory card.  
Turn on the flash. (p. 52)  
See “Cautions when using memory cards”  
for more detail. (p. 109)  
Adjust the ISO sensitivity. (p. 54)  
Adjust the exposure value. (p. 63)  
If you change the name of a file, your  
camera may not play the file (the name of  
the file should meet the DCF standard). If  
you encounter this situation, play back the  
files on your computer.  
Cannot play back files  
Appendixes 115  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before contacting a service center  
Situation  
Suggested remedies  
Situation  
Suggested remedies  
Make sure that the camera is correctly  
connected to the TV with the A/V cable.  
End Intelli-studio and restart the program.  
The TV does not  
display your photos  
You cannot use Intelli-studio on  
Macintosh computers.  
Make sure that your memory card  
contains photos.  
Make sure that PC Software is set to  
On in the settings menu. (p. 102)  
Make sure that the USB cable is  
connected correctly.  
Intelli-studio is not  
functioning properly  
Depending on your computer's  
Your computer does  
not recognize your  
camera  
specifications and environment, the  
program may not launch automatically. In  
this case, click Start All Programs “  
SAMSUNG Intelli-studio “  
Make sure that your camera is switched  
on.  
Make sure that you are using a supported  
operating system.  
Intelli-studio on your computer.  
Your computer  
disconnects the  
camera while  
The file transmission may be interrupted by  
static electricity. Disconnect the USB cable  
and connect it again.  
transferring files  
Videos may not play on some video player  
Your computer cannot programs. To play video files captured with  
play videos  
your camera, install and use the Intelli-studio  
program on your computer. (p. 91)  
Appendixes 116  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Camera specifications  
Image sensor  
Focusing  
Type  
1/2.3" (Approximately 7.76 mm) CCD  
Approximately 16.1 mega-pixels  
Approximately 16.4 mega-pixels  
TTL auto focus (Multi AF, Center AF, Face Detection AF,  
Tracking AF, Smart Face Recognition AF)  
Type  
Effective pixels  
Wide (W)  
80 cm-infinity  
5-80 cm  
Tele (T)  
Total pixels  
Normal (AF)  
Macro  
250 cm-infinity  
100-250 cm  
100 cm-infinity  
Range  
Lens  
Samsung Lens f = 4.5–22.5 mm  
(35 mm film equivalent: 25–125 mm)  
Auto Macro  
5 cm-infinity  
Focal length  
F-stop range  
Zoom  
Shutter speed  
F2.5 (W)–F6.3 (T)  
Smart Auto: 8–1/2,000 sec.  
Still image mode: 1.0–5.0X  
(Optical zoom X Digital zoom: 25.0X)  
Program: 1–1/2,000 sec.  
Night: 8–1/2,000 sec.  
Display  
Exposure  
Type  
TFT LCD  
Control  
Program AE  
Feature  
2.7" (6.9 cm) QVGA (230K)  
Metering  
Multi, Spot, Center-weighted, Face Detection  
2EV (1/3 EV Step)  
Compensation  
Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800,  
ISO 1600, ISO 3200  
ISO equivalent  
Appendixes 117  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Camera specifications  
Flash  
Date Imprinting  
Off, Date, Date & Time  
Shooting  
Mode  
Off, Red-eye Fix, Slow Sync, Fill in, Red-eye, Auto  
Wide: 0.3–4.2 m (ISO Auto)  
Tele: 0.5–1.6 m (ISO Auto)  
Range  
Modes: Smart Auto (Portrait, Night Portrait,  
Backlight Portrait, Night, Backlight, Landscape,  
White, Natural Green, Blue Sky, Sunset, Macro,  
Macro text, Macro Color, Tripod, Action, Fireworks),  
Program, Live Panorama, Picture in Picture, Scene  
(Magic Frame, Beauty Shot, Intelligent Portrait,  
Funny Face, Night, Landscape, Text, Sunset,  
Dawn, Backlight, Beach & Snow)  
Recharging time  
Approximately 5 sec.  
Shake reduction  
Digital Image Stabilization (DIS)  
Photos  
Effect  
Smart Filter: Normal, Miniature, Vignetting,  
Half Tone Dot, Sketch, Fish-eye, Defog, Classic,  
Retro, Negative  
Burst: Single, Continuous, Motion Capture, AEB  
Timer: Off, 10 Sec, 2 Sec, Double  
Photo Shooting  
mode  
Image Adjust: Contrast, Sharpness, Saturation  
Modes: Smart Scene Detection (Landscape,  
Blue Sky, Natural Green, Sunset), Movie  
Smart Filter: Normal, Palette Effect 1, Palette Effect 2,  
Palette Effect 3, Palette Effect 4, Miniature, Vignetting,  
Defog, Fish-eye, Classic, Retro, Negative  
Video Shooting  
mode  
Format: MJPEG (Max. recording time: 20 min)  
Size: 1280 X 720 HQ (Per one file: Max. 4 GB),  
640 X 480, 320 X 240  
Videos  
White Balance  
Frame Rate: 30fps, 15fps  
Auto WB, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten,  
Measure: Shutter  
Sound Alive: Sound Alive On, Sound Alive Off,  
Mute  
Video editing (embedded): Pause during recording,  
Still image capture  
Appendixes 118  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Camera specifications  
Playback  
For 1 GB microSD: Number of photos  
Single image, Thumbnails, Multi Slide Show with  
Super Fine  
106  
Fine  
Normal  
308  
Music and Effect, Movie clip, Smart Album*  
* Smart Album category: Type, Date, Color, Week,  
Face  
Type  
Edit  
4608 X 3456  
4608 X 3072  
4608 X 2592  
3648 X 2736  
2592 X 1944  
1984 X 1488  
1920 X 1080  
1024 X 768  
210  
238  
122  
349  
142  
280  
412  
Resize, Rotate, Intelligent Portrait, Smart Filter,  
Image Adjust, Trim  
168  
328  
477  
Image size  
Image Adjust: ACB, Red-eye Fix, Face Retouch,  
Brightness, Contrast, Saturation, Add Noise  
325  
617  
873  
531  
970  
1,358  
1,909  
3,055  
Effect  
Smart Filter: Normal, Miniature, Vignetting,  
873  
1,455  
2,546  
Soft Focus, Old Film 1, Old Film 2, Half Tone Dot,  
Sketch, Fish-eye, Defog, Classic, Retro, Negative  
1,608  
Storage  
These figures are measured under Samsung’s  
standard conditions. Your results may vary depending  
on the shooting conditions and camera settings.  
Internal memory: Approximately 70 MB  
External memory (Optional):  
microSD card (1–2 GB guaranteed),  
microSDHC card (up to 8 GB guaranteed)  
Media  
Internal memory capacity may not match these  
specifications.  
Still Image: JPEG (DCF), EXIF 2.21, DPOF 1.1,  
PictBridge 1.0  
File format  
Movie Clip: AVI (MJPEG)  
Appendixes 119  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Camera specifications  
Interface  
Dimensions (W X H X D)  
90.9 X 53.9 X 16.9 mm (without protrusions)  
Weight  
Digital output  
connector  
USB 2.0  
Audio input/output Internal speaker (Mono), Microphone (Mono)  
101 g (without battery and memory card)  
Operating Temperature  
0–40 °C  
Video output  
A/V: NTSC, PAL (selectable)  
5.0 V  
DC power input  
connector  
Operating Humidity  
5–85 %  
Power source  
Rechargeable  
battery  
Lithium-ion battery (BP70A, 700 mAh)  
Micro USB (5 pin)  
Software  
Intelli-studio  
Connector type  
Specifications may change without notice to improve performance.  
The power source may differ depending on your region.  
Appendixes 120  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
ACB (Auto Contrast Balance)  
Composition  
This feature automatically improves the contrast of your images  
when the subject is backlit or when there is a high contrast  
between your subject and the background.  
Composition in photography means arranging objects in a photo.  
Usually, abiding by the rule of thirds leads to a good composition.  
DIS (Digital Image Stabilization)  
AEB (Auto Exposure Bracket)  
This feature compensates in real-time for shaking and vibrating  
while shooting. There can be a certain amount of image  
degradation compare to Optical Image Stabilization.  
This feature automatically captures several images at different  
exposures to help you capture a properly-exposed image.  
AF (Auto Focus)  
DCF (Design rule for Camera File system)  
A system that automatically focuses the camera lens on the  
subject. Your camera uses the contrast to focus automatically.  
A specification to define a file format and file system for digital  
cameras created by the Japan Electronics and Information  
Technology Industries Association (JEITA).  
Aperture  
Depth of field  
The aperture controls the amount of light that reaches the  
camera’s sensor.  
The distance between the nearest and farthest points that can  
be acceptably focused in a photograph. Depth of field varies with  
lens aperture, focal length, and distance from the camera to the  
subject. Selecting a smaller aperture, for example, will increase  
the depth of field and blur the background of a composition.  
Camera shake (Blur)  
If the camera is moved while the shutter is open, the entire image  
may appear blurred. This occurs more often when the shutter  
speed is slow. Prevent camera shake by raising the sensitivity,  
using the flash, or using a faster shutter speed. Alternately, use a  
tripod, the OIS or DIS function to stabilize the camera.  
Digital zoom  
A feature that artificially increases the amount of zoom available  
with a zoom lens (Optical zoom). When using the Digital zoom,  
the image quality will deteriorate as the magnification increases.  
Appendixes 121  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Glossary  
DPOF (Digital Print Order Format)  
Flash  
A format for writing printing information, such as selected images  
and number of prints, on a memory card. DPOF-compatible  
printers, sometimes available at photo shops, can read the  
information from the card for convenient printing.  
A speed light that helps to create adequate exposure in low-light  
conditions.  
Focal length  
The distance from the middle of the lens to its focal point (in  
millimeters). Longer focal lengths result in narrower angles of view  
and the subject is magnified. Shorter focal lengths result in wider  
angles of view.  
EV (Exposure Value)  
All the combinations of the camera’s shutter speed and lens  
aperture that result in the same exposure.  
EV Compensation  
Image sensor  
This feature allows you to quickly adjust the exposure value  
measured by the camera, in limited increments, to improve the  
exposure of your photos. Set the EV compensation to -1.0 EV to  
adjust the value one step darker and 1.0 EV to one step brighter.  
The physical part of a digital camera that contains a photosite for  
each pixel in the image. Each photosite records the brightness of  
the light that strikes it during an exposure. Common sensor types  
are CCD (Charge-coupled Device) and CMOS (Complementary  
Metal Oxide Semiconductor).  
Exif (Exchangeable Image File Format)  
ISO sensitivity  
A specification to define an image file format for digital cameras  
created by the Japan Electronic Industries Development  
Association (JEIDA).  
The sensitivity of the camera to light, based on the equivalent film  
speed used in a film camera. At higher ISO sensitivity settings,  
the camera uses a higher shutter speed, which can reduce blur  
caused by camera shake and low light. However, images with  
high sensitivity are more susceptible to noise.  
Exposure  
The amount of light allowed to reach the camera’s sensor.  
Exposure is controlled by a combination of the shutter speed, the  
aperture value, and ISO sensitivity.  
Appendixes 122  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
JPEG (Joint Photographic Experts Group)  
Noise  
A lossy method of compression for digital images. JPEG images  
are compressed to reduce their overall file size with minimal  
deterioration of the image resolution.  
Misinterpreted pixels in a digital image that may appear as  
misplaced or random, bright pixels. Noise usually occurs when  
photos are shot with a high sensitivity or when a sensitivity is  
automatically set in a dark place.  
LCD (Liquid Crystal Display)  
Optical zoom  
A visual display commonly used in consumer electronics. This  
display needs a separate backlight, such as CCFL or LED, to  
reproduce colors.  
This is a general zoom which can enlarge images with a lens and  
does not deteriorate quality of images.  
Macro  
Quality  
This feature allows you to capture close-up photos of very small  
objects. When using the macro feature, the camera can maintain  
a sharp focus on small objects at a near life-size ratio (1:1).  
An expression of the rate of compression used in a digital image.  
Higher quality images have a lower rate of compression, which  
usually results in a larger file size.  
Metering  
Resolution  
The metering refers to the way in which the camera measures the  
quantity of light to set the exposure.  
The number of pixels present in a digital image. High resolution  
images contain more pixels and typically show more detail than  
low resolution images.  
MJPEG (Motion JPEG)  
A video format which is compressed as a JPEG image.  
Appendixes 123  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
Shutter speed  
Shutter speed refers to the amount of time it takes to open and  
close the shutter, and it is an important factor in the brightness of  
a photo, as it controls the amount of light which passes through  
the aperture before it reaches the image sensor. A fast shutter  
speed allows less time to let light in and the photo becomes  
darker and more easily freezes subjects in motion.  
Vignetting  
A reduction of an image’s brightness or saturation at the periphery  
(outer edges) compared to the center of the image. Vignetting  
can draw interest to subjects positioned in the center of an  
image.  
White balance (color balance)  
An adjustment of the intensities of colors (typically the primary  
colors red, green, and blue), in an image. The goal of adjusting  
the white balance, or color balance, is to correctly render the  
colors in an image.  
Appendixes 124  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Correct Disposal of This Product  
Correct disposal of batteries in this product  
(Waste Electrical & Electronic Equipment)  
(Applicable in the European Union and other European  
countries with separate battery return systems)  
(Applicable in the European Union and other European  
countries with separate collection systems)  
This marking on the battery, manual or packaging indicates that  
the batteries in this product should not be disposed of with other  
household waste at the end of their working life. Where marked, the  
chemical symbols Hg, Cd or Pb indicate that the battery contains  
mercury, cadmium or lead above the reference levels in EC Directive  
2006/66. If batteries are not properly disposed of, these substances  
can cause harm to human health or the environment.  
This marking on the product, accessories or literature indicates that  
the product and its electronic accessories (e.g. charger, headset, USB  
cable) should not be disposed of with other household waste at the  
end of their working life. To prevent possible harm to the environment  
or human health from uncontrolled waste disposal, please separate  
these items from other types of waste and recycle them responsibly to  
promote the sustainable reuse of material resources. Household users  
should contact either the retailer where they purchased this product,  
or their local government office, for details of where and how they can  
take these items for environmentally safe recycling. Business users  
should contact their supplier and check the terms and conditions of the  
purchase contract. This product and its electronic accessories should  
not be mixed with other commercial wastes for disposal.  
To protect natural resources and to promote material reuse, please  
separate batteries from other types of waste and recycle them through  
your local, free battery return system.  
This Class [B] digital apparatus complies with Canadian  
ICES-003.  
PlanetFirst represents Samsung Electronics'  
commitment to sustainable development and social  
responsibility through eco-driven business and  
management activities.  
Dispose unwanted electronics through an approved recycler.  
To nd the nearest recycling location, go to our website:  
www.samsung.com/recyclingdirect Or call, (877) 278 - 0799  
Appendixes 125  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCC notice  
NOTE:  
Declaration of Conformity  
This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to part 15 of the  
FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation.  
This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of  
the following measures:  
Trade Name  
: Samsung Electronics America, Inc.  
Model No.  
: Samsung ST66/ST68  
Responsible Party  
Address  
: Samsung Electronics America, Inc.  
: 85 Challenger Road, Ridgefield Park,  
NJ 07660  
Telephone No.  
: 1-800-SAMSUNG (726-7864)  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2)  
this device must accept any interference received, including  
interference that may cause undesired operation.  
- Reorientate, or relocate, the receiving antenna.  
- Increase the distance between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
- Consult the dealer or an experienced radio / TV technician for  
help.  
CAUTION:  
Changes or modifications not expressly approved by the  
manufacturer responsible for compliance could void the user’s  
authority to operate the equipment.  
Appendixes 126  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Please refer to the warranty that came with your product or  
or inquiries.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

RCA Camcorder CC9370 User Guide
Rheem Water Heater HE45 160 User Guide
Rosewill Network Card RNX N2X User Guide
Runco Flat Panel Television CR 32HD User Guide
Saitek Games P2500 User Guide
Salton Stereo System WT50BL User Guide
Samsung Indoor Furnishings WE357A0C User Guide
Samsung Stereo System MAX VS720 User Guide
Sanyo Cordless Telephone CLT 2418 User Guide
Sennheiser Headphones 500643 User Guide