Technical Information
Writer
Technical Support in HQ
CS-110309
Importance
Date of Issue
Type
Low
Issue No.
Related Models
Subject
9th Mar. 2011
Information
SPC-6000, SRD Series
SPC-6000 Quick Setup Guide
Contents
Quick Set-up Guide
■ Summary
The SPC-6000 Quick set-up guide describes how to connect to both
an SPD speed dome and Samsung Digital Video Recorder for both
basic and multiple operations.
The equipment used in this example includes:
• SPC-6000(FW v1.00_100913)
• SRD-1670DC(FW v1.02_110118164134)
• SPD-3750T(Dome v1.28)
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
b. Menu Set
Caution : Both of SPC-6000 and SCC-3100A cannot be used as Master, Slave in one system. 2
keyboards are not compatible, if SVR and SRD series are used in one system, the system
keyboard should be separately used as recommended below.
- SVR Series : SCC-3100A
- SRD Series : SPC-6000
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
<Multiple Operation>
a. hardware connection
First, let’s take a look at the system with coax camera installed. In order to control the
specific camera of the specific SRD connected, what you only need to do is to connect SRD.
If succeed, keyboard will send packets to control SRD and SRD will control PTZ cameras. For
example, if you would like to control Camera which is connected to channel 1 of SRD,
Connect SRD first by pushing [DVR] + [1] + [Enter] and choose channel 1. Also, if you would
like to control Camera connected to channel 2 of SRD 2, Connect SRD by pushing [DVR] + [2]
+ [Enter] + [2] + [CAM] in sequence.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
In case of system using RS-485 data cable, TX port on rear side of SRD will connect both of
keyboard data +/- and camera data +/-. It looks like the SRD uses ‘Serial control’ (Keyboard
controls SRD, and SRD controls Camera that I call it ‘Serial control’) but SRD will just bypass
the data from the keyboard and pass it to the camera directly.(I call it ‘Parallel control’) In
short,
-
-
SRD with coax PTZ : Serial control from the keyboard
SRD with RS-485 PTZ : Parallel control from the keyboard (SRD bypass data & Keyboard
controls PTZ directly)
Therefore, Please assign ID of PTZs & SRDs with all different numbers to prevent
communication error of the data between the keyboard and devices. Also please don’t forget
to set termination as ‘ON’ for far position of camera from the DVR.
b. menu set
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
c. Controller Operation
- End -
Download from Www.Somanuals.com. All Manuals Search And Download.
|