Samsung DVR 895M User Guide

Quick Setup Guide  
1 EZ Record  
HDD & DVD RECORDER  
DVD-893M/895M/897M  
2 Getting Connected  
3 DTV Functions  
4 Basic Operation  
1 EZ Record  
Recordable Discs  
DVD-RAM/ RW/ R  
This function allows you Initialise and Finalise a disc automatically.  
(Refer to page 48 of the Instruction Manual for more information.)  
1. With the unit in Stop mode, press the MENU button.  
2. Press the ꢀꢁ buttons to select Setup, then press the OK or  
button.  
3. Press the ꢀꢁ buttons to select Recording, then press the OK or  
button.  
button.  
4. Press the ꢀꢁ buttons to select EZ Record, then press the OK or  
5. Press the ꢀꢁ buttons to select On, then press the OK or  
button.  
Press the EXIT button to exit the menu.  
6. Insert a disc.  
If the disc is new, it is initialised to V mode automatically. (DVD-RW only)  
7. Press the REC button.  
2 Getting Connected  
Select one of the following three types of connections :  
The VHF/UHF RF OUT jack of this product sends only signals received through the antenna.  
It does not output audio/video signals.  
You must use one of the following connections on this unit.  
Antenna + HDD & DVD Recorder + TV  
AV amplifier (receiver) ▼  
You can connect your HDD & DVD Recorder to the  
television using the SCART cable if the appropriate input is  
available on the television. You thus:  
Obtain better quality sound and pictures  
Simplify the setting up procedure of your HDD & DVD Recorder  
Connect the RF cable as shown.  
OR  
Connect one end of the SCART cable to the AV1 jack  
on the rear of the HDD & DVD Recorder. Also use the  
Video/Audio Cable to connect AUDIO OUT(R/L)/VIDEO  
OUT jacks on the HDD & DVD Recorder to the Audio &  
Video jacks on the TV.  
To RF IN  
For the best picture quality, if your TV has Component  
video jacks, you can use component cables instead of  
the yellow video connector on the Video/Audio cable. If  
your TV has a HDMI or DVI jack, you can use the HDMI  
or HDMI-DVI cable instead of the yellow video  
connector on the Video/Audio cable.  
To RF OUT  
RF Cable  
HDD & DVD Recorder  
OR  
OR  
OR  
If you have an AV amplifier  
Connect either audio cables from the AUDIO OUT(R/L) jacks on  
the HDD & DVD Recorder to the AUDIO IN jacks on your AV  
amplifier, or a digital cable from the DIGITAL AUDIO OUT  
(OPTICAL) jack on the HDD & DVD Recorder to the DIGITAL  
AUDIO IN jack on your AV amplifier.  
To ANT INPUT  
TV  
English-1  
C Samsung Electronics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. With the unit in Stop mode, press the MENU button.  
2. Press the ꢀꢁ buttons to select “Disc Manager”, then  
3 DTV Functions  
press the OK or  
button.  
3. Press the ◄ ► buttons to select “Format”, then press  
Display Screen  
the OK button.  
HDD/DVD-RAM/DVD+RW  
After the television channels have been stored, you will see the  
following picture(banner) each time you switch channels.  
You will be prompted with the confirmation message  
Current media : Do you want to format?”.  
Press the ◄ ► buttons to select “Yes”, then press the  
OK button.  
***  
Banner Elements  
1. Displays the favorite channel.  
2. Displays the teletext.  
3. Displays the subtitle.  
DVD-RW  
You will be prompted with the confirmation message  
“Choose the recording format for DVD-RW”.  
Press the ◄ ► buttons to select the desired format  
type, then press OK button. “All data will be deleted.  
Do you want to continue?” is displayed.  
4. Displays the multi audio.  
HDD  
DTV  
TF1  
001  
4. Press the ◄ ► buttons to select “Yes”, then press the  
OK button.  
The disc is formatted.  
The icon is displayed according to the service  
information of signal.  
Recording the current TV programme  
you are watching  
The icon is displayed only with more than one audio type  
and language.  
1. Press the HDD or DVD button.  
By pressing the button, you can see the detailed  
information.  
If you select DVD, Press the OPEN/CLOSE button  
and place a recordable disc on the disc tray.  
2. Press the OPEN/CLOSE button to close the disc tray.  
Wait until “LOAD” disappears from the front panel  
display.  
Guide  
The electronic programme guide gives you a channel list  
for the channels.  
3. Press the PROG (  
) or Number buttons to select  
the current programme you want to record.  
1. With the unit in Stop mode, press the MENU button.  
4. Press the REC MODE button repeatedly, (or press the  
REC MODE button and then press the ꢀꢁ buttons)  
to select the recording speed (quality).  
2. Press the ꢀꢁ buttons to select Guide, then press the  
OK or  
button.  
Press the GUIDE button while you are viewing a  
programme. (DTV)  
§SP§LP§EP§XP  
RED(A) button (Timer Record) : Setting the Timer  
Record.  
Record Mode  
SP (02:12)  
(
$
) button : Go to next day  
(#  
) button : Go to previous day  
It displays programme from now to 7 days after.  
DVD-SH893M  
HDD(160GB)  
ꢀꢁ◄ ► button : select the programme and  
station.  
XP(High,approx. 33 hours) SP(Standard,approx. 67  
hours) LP(Low,approx. 133 hours) ➝  
EP(Extended,approx. 199 hours/264 hours) ➝  
FR(Flexible,approx. 33~264 hours)  
INFO button (Information) : View the detail information  
DVD-SH895M  
HDD(250GB)  
4 Basic Operation  
XP(High,approx. 53 hours) SP(Standard,approx.  
106 hours) LP(Low,approx. 211 hours) ➝  
EP(Extended,approx. 316 hours/421 hours) ➝  
FR(Flexible,approx. 53~421 hours)  
Formatting a Disc  
When you insert an unused disc, the following message  
appears. Since available functions differ depending on the  
disc type, select a disc that best fits your preferences.  
DVD-SH897M  
HDD(320GB)  
XP(High,approx. 68 hours) SP(Standard,approx.  
135 hours) LP(Low,approx. 270 hours) ➝  
EP(Extended,approx. 405 hours/534 hours) ➝  
FR(Flexible,approx. 68~534 hours)  
DVD-RAM/DVD+R : Formatting will be started  
automatically.  
DVD+RW : Use after formatting the disc.  
DVD-RW : Use after initializing the disc. If you want to  
change the V or VR mode, refer to "Formatting a  
Disc" on the Instruction Manual.  
DVD  
XP(High,approx. 1 hour) SP(Standard,approx. 2  
hours) LP(Low,approx. 4 hours) ➝  
EP(Extended,approx. 6 hours/8 hours) ➝  
FR(Flexible,approx. 1~8 hours)  
DVD-R : Formatting disc is unnecessary and only  
Video Mode Recording is supported.  
English-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Press the REC button.  
Finalising a Disc  
Information concerning the channel being recorded is  
displayed on the screen and then recording begins.  
Icon (REC) is displayed on the front panel.  
After you record titles onto a DVD-RW/ R disc with your  
HDD & DVD Recorder, it needs to be finalised before it can  
be played back on external devices.  
To stop recording  
1. With the unit in Stop mode, press the MENU button.  
Press the STOP ( ) button to stop or finish a recording in progress.  
2. Press the ꢀꢁ buttons to select “Disc Manager”, then  
press the OK or  
button.  
Making a Timer Recording  
3. Press the  
DVD-RW(VR)  
Disc Manager  
ꢀꢁ◄ ► button  
to select  
Finalise”, then  
press the OK  
button.  
1. Press the OPEN/CLOSE button, place a recordable  
Disc Name  
Used Space  
Available Space  
00:17  
(
0.52 GB)  
3.85 GB)  
disc on the disc tray.  
01:54 SP  
(
2. Press the OPEN/CLOSE button to close the disc tray.  
Disc Protection Info  
Current Rec. Mode  
Not Protected  
VR-Mode  
Wait until “LOAD” disappears from the front panel display.  
Rename  
You will be  
3. With the unit in Stop mode, press the TIMER button.  
Protection  
Delete All  
Finalise  
Format  
prompted with  
the message  
“Do you want  
to finalise  
< MOVE  
sSELECT  
rRETURN  
eEXIT  
4. Press the ꢀꢁ button to select the Scheduled List  
,
then press the OK or  
button.  
DVD-RW(VR)  
Disc Manager  
5. Press the OK  
HDD  
Scheduled List  
disc?”.  
button to select  
“Add a list”.  
The Timer  
Current Time 10:54  
Disc Name  
No.  
To  
Source Date  
Start  
End  
Mode  
PDC  
Used
Avai
If you select  
"Yes", you will  
be prompted  
again with the  
message “Disc  
will be finalised.  
Do you want  
to continue?”.  
Add a list  
Do you want to finalise disc?  
Disc
Curr
Record Input  
items (Date/  
Time etc.) are  
displayed.  
Fill in the items  
using the ꢀꢁ◄  
and number  
buttons.  
No  
Yes  
Rename  
Protection  
Delete All  
Finalise  
Format  
Recordable Time HDD 69:30 SP  
Recorded List  
rRETURN eEXIT  
< MOVE  
sSELECT  
rRETURN  
eEXIT  
< MOVE  
sSELECT  
HDD  
Scheduled List  
Current Time 10:54  
4. Press the ◄ ► buttons to select “Yes”, then press the  
No.  
To  
Source Date  
Start  
End  
Mode  
PDC  
OK button.  
No.01 No Title  
To  
Source  
AV  
Date  
Start  
12:00  
End  
Mode  
PDC  
The disc is finalised.  
6. After selecting  
the set up  
HDD  
1
JAN 01  
14:00  
SP  
Off  
• Once a disc is finalised, you cannot delete entries  
from the record list.  
Recordable Time HDD 69:30 SP  
Recordable Time HDD 69:30 SP  
Title  
s
Save  
value for each  
mode, press  
the OK button  
to select  
Recorded List  
eEXIT  
After being finalised, the DVD R/DVD-RW(V-mode)  
operates in the same manner as a DVD-Video.  
Depending on the disc type, the displayed screen  
may be different.  
Finalising time may be different depending on the  
amount of data recorded on the disc.  
Data on the disc will be damaged if the recorder is  
powered off during finalisation process.  
< MOVE  
sSELECT  
rRETURN  
Save”.  
7. Turn the power off to finish the Timer Recording setting.  
Timer Recording will not work when the power is on.  
Anynet+(HDMI CEC)  
You can finalise the disc automatically using  
EZ Record. Refer to page 48 of the Instruction  
Manual for more information  
Anynet+ is a function that can be used to operate the  
recorder using a Samsung TV remote control, by  
connecting the HDD & DVD RECORDER to a SAMSUNG  
TV using an HDMI Cable. (This is only available with  
SAMSUNG TVs that support Anynet+.)  
Disc compatibility  
Not all brands of discs will be compatible with this unit.  
1. With the unit in Stop mode, press the MENU button.  
2. Press the ꢀꢁ buttons to select Setup, then press the  
OK or  
button.  
3. Press the  
System  
ꢀꢁ buttons  
to select  
System,  
HDD  
Library  
Auto Power Off  
Power Save  
: Off  
: Off  
Guide  
Channel  
Anynet+ (HDMI CEC) 
Off  
then press  
On  
DVB-T Auto Subtitle 
Timer Record  
Touch Key Sound  
: Off  
the OK or  
Disc Manager  
Setup  
DivX(R) Registration  
button.  
4. Press the  
m MOVE  
sSELECT  
rRETURN  
eEXIT  
ꢀꢁ buttons  
to select Anynet+ (HDMI CEC), then press the OK or  
button. Anynet+ (HDMI CEC) items will be  
displayed.  
5. Press the ꢀꢁ buttons to select On, then press the OK  
or  
button.  
English-4  
AK68-01594B  
Download from Www.Somanuals.com. All Manuals Search And Download.  

RAD Data comm Network Router ASMi 52 User Guide
Radio Shack Computer Keyboard 26 534 User Guide
RCA Universal Remote RCR6373 User Guide
Renesas Network Card M3T F160 80NSD User Guide
Sabrent Network Card PCI 802N User Guide
Sakar Camcorder 32490 User Guide
Samsung Printer ML 6060N User Guide
Samsung Vacuum Cleaner SC88P User Guide
Sanyo Refrigerator MPR 715F User Guide
Seagate Computer Drive 54002 SATA User Guide