STB-DVD-VCR
SV-DVD54T
Instruction Manual
PAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Overview
Download from Www.Somanuals.com. All Manuals Search And Download
Contents
ꢀ DVD Functions
ꢀ Solving Problems
Choosing a Connection . . . . . . . . . . . . . . . . . . .28
Setting Up the Language Features . . . . . . . . . .28
Setting Up the Audio Options . . . . . . . . . . . . . . .30
Setting Up the Display Options . . . . . . . . . . . . .31
Setting Up the Parental Control . . . . . . . . . . . . .32
A/V Receiver Connections . . . . . . . . . . . . . . . . .33
Special Playback Features . . . . . . . . . . . . . . . .33
Adjusting the Aspect Ratio (EZ View) . . . . . . . . .34
Using the Display Function . . . . . . . . . . . . . . . .35
Changing the Camera Angle . . . . . . . . . . . . . . .36
Selecting the Subtitle Language . . . . . . . . . . . .36
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Selecting the Audio Language . . . . . . . . . . . . . .37
Using the Mark Function . . . . . . . . . . . . . . . . . .38
MP3/WMA Play . . . . . . . . . . . . . . . . . . . . . . . . .38
Picture CD Playback . . . . . . . . . . . . . . . . . . . . .39
Technical Specification (VCR,DVD) . . . . . . . . . . 47
Technical Specification (STB) . . . . . . . . . . . . . . 48
Troubleshooting Guide (VCR) . . . . . . . . . . . . . .49
Troubleshooting Guide (DVD) . . . . . . . . . . . . . .50
Troubleshooting Guide (STB) . . . . . . . . . . . . . .51
ꢀ STB Functions
Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Volume Control . . . . . . . . . . . . . . . . . . . . . . . . .41
Select Soundtrack . . . . . . . . . . . . . . . . . . . . . . .41
Select Videotrack . . . . . . . . . . . . . . . . . . . . . . .42
Service Favorites . . . . . . . . . . . . . . . . . . . . . . .42
Program Information . . . . . . . . . . . . . . . . . . . . . 42
Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Teletext VBI . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Channel Organising . . . . . . . . . . . . . . . . . . . . . .44
Parental Lock . . . . . . . . . . . . . . . . . . . . . . . . . .45
System Setup . . . . . . . . . . . . . . . . . . . . . . . . . .46
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-3
Safety Instructions
The following illustrations represent precautions.
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE STB-DVD-VCR. Refer to service personnel.
10%
75%
40°C
H
H
5°C
Do NOT expose the STB-DVD-
VCR to direct sunlight.
Do NOT expose the STB-DVD-
VCR to any liquids.
Do NOT expose the STB-DVD-VCR
to extreme temperature conditions
(below 5°C and above 40°C) or to
extreme humidity conditions (less
than 10% and more than 75%).
Do NOT place any objects on the
STB-DVD-VCR or remote control.
During a storm and/or lightning,
unplug the STB-DVD-VCR from
the mains socket and aerial.
If the remote control is not used for
a long period of time, remove the
batteries and store it in a cool, dry
place.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS
This product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners.
Use of this copyright protection technology must by authorized by Macrovision Corporized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-4
Disc Type and Characteristics
This DVD player is capable of playing the following types of discs with the corresponding logos :
Disc Types (Logos) Recording Types Disc Size
DVD
Max. Playing Time
Characteristics
•
•
DVD contains excellent sound and video
due to Dolby Digital and MPEG-2 system.
Single-sided 240 min.
Double-sided 480 min.
12 Cm
Audio
+
Various screen and audio functions can
be easily selected through the on-screen
menu.
Single-sided 80 min.
Double-sided 160 min.
Video
8 Cm
•
An LP is recorded as an analog signal
with more distortion. CD is recorded as a
Digital Signal with better audio quality,
less distortion and less deterioration of
audio quality over time.
AUDIO-CD
12 Cm
8 Cm
74 min.
20 min.
Audio
* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
* It may not be to play CD-R,CD-RW and DVD-R in all cases due to the type of disc or condition of the recording.
Disc Markings
Play Region Number
Both the DVD player and the discs are coded by
region. These regional codes must match in order for
the disc to play. If the codes do not match, the disc
will not play.
The Region Number for this player is described
on the rear panel of the player.
~
• Play Region Number
• PAL colour system in Australia, Newzealand, etc.
PAL
NTSC
• NTSC broadcast system in U.S.A, Canada,
Korea, Japan, etc.
• Dolby Digital disc
• Stereo disc
STEREO
DIGITAL
SOUND
• Digital Audio disc
• DTS disc
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-5
Front View of the STB-DVD-VCR
1
2
3
4
5
6
7
8
9
10
11 12
13 14 15
16
1
2
3
4
5
6
DVD DECK
7
8
9
STOP BUTTON
12 INPUT SELECTION BUTTON
13 STB/DVD/VCR BUTTON
14 LINE 2 VIDEO INPUT JACK
15 LINE 2 AUDIO L, R INPUT JACK
16 EZ VIEW BUTTON
OPEN/CLOSE BUTTON
PLAY/STILL BUTTON
VIDEO CASSETTE COMPARTMENT
EJECT BUTTON
F.F / SKIP NEXT BUTTON
10 PROGRAMME SELECTION
BUTTON
STANDBY/ON BUTTON
REW/SKIP BACK BUTTON
11 RECORD BUTTON
Rear View of the STB-DVD-VCR
1
2
3
4
5
AERIAL IN SOCKET
COMPONENT VIDEO OUT
6
7
8
9
10
11
1
2
3
5
6
OUT TO TV SOCKET
LINE IN1 / LINE OUT
(COMPOSITE)
9
DIGITAL AUDIO OUT SOCKET
(OPTICAL)
10 RS-232 SOCKET
11 ANT OUT SOCKET
DIGITAL AUDIO OUT SOCKET
(COAXIAL)
7
8
S-AUDIO OUT SOCKETS
S-VIDEO OUT SOCKET
4
ANT IN SOCKET
Accessories
You have just purchased a SAMSUNG SV-DVD54T (STB-DVD-VCR).
Together with your STB-DVD-VCR, you will find the following accessories in the box.
REMOTE CONTROL
& BATTERIES
AUDIO & VIDEO
CABLE
OWNER’S
INSTRUCTIONS
COAXIAL CABLE
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-6
Connecting STB-DVD-VCR to
the TV using the RCA Cable
Display Indicators
1
2
3
4
5
You can connect your STB-DVD-VCR to the television
using the RCA cable if any appropriate Line input is
available on the television. You thus:
◆
◆
Obtain better quality sound and pictures
Simplify the setting up procedure of your
STB-DVD-VCR
◆
Make sure that both the television and the STB-
DVD-VCR are switched off before connecting
the cables.
7
6
8
9
10
1
2
3
The DVD Deck is active.
A DVD, CD is loaded
1
2
3
Connect the aerial RF cable to ANT.IN on the rear
of your STB-DVD-VCR.
The time, counter position, time remaining or
current deck status is displayed
VHS tape is inserted
The VCR Deck is active
3D sound
4
5
6
7
8
9
Use the RCA Audio/Video cable to connect the
STB-DVD-VCR and the TV receiver.
Use LINE OUT on the STB-DVD-VCR and LINE IN
on the TV.
DTS disc
STEREO indicator
REC Mode
10 A Timer Recording is programmed or in progress.
Inserting Batteries in the Remote
Control
1
You must insert or replace the batteries in the remote
control when you:
2
◆
◆
Purchase the STB-DVD-VCR
Find that the remote control is no longer
working correctly
TV
1
2
Push the tab in the direction of the arrow to release
the battery compartment cover on the rear of the
remote control.
3
Insert two AAA, RO3 or equivalent batteries,
checking for polarities:
◆
+ on the battery with + on the remote control
◆
– on the battery with – on the remote control
3
Replace the cover by aligning it with the base of
the remote control and pushing it back into place.
1
◆
Use same types of batteries
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-7
Connecting STB-DVD-VCR to a
Satellite Receiver or Other
Equipment
Connecting STB-DVD-VCR to the
TV using the Coaxial Cable
You can connect other audio and/or video equipment
to your STB-DVD-VCR in different ways. The following
illustrations give a few examples of the connection
possibilities.
To receive television programmes a signal must be
received from one of the following sources:
◆
◆
◆
◆
An outdoor aerial
An indoor aerial
A cable television network
A satellite receiver
◆
The RCA input/output connectors on the rear of
the STB-DVD-VCR are used for equipment, such
as camcorders, VCRs or sound systems.
◆
Make sure that both the television and the STB-
DVD-VCR are switched off before connecting the
cables.
Camcorder
VCR
1
Connect this the RF cable to the 75Ω coaxial
socket marked ANT.IN on the rear of your STB-
DVD-VCR.
TV
2
3
Plug the coaxial cable supplied into the
on your STB-DVD-VCR.
socket
Plug the other end of the coaxial cable into the
connector previously used for the aerial on the
television.
REAR OF THE
STB-DVD-VCR
Sound system
4
To obtain better quality pictures and sound on your
television, you can also connect your STB-DVD-
VCR to the television via the RCA cable (see
previous page) if your television is equipped with
this type of connection.
Plug & Auto Set up
The VCR section of the STB-DVD-VCR will
automatically set itself up when it is plugged into the
mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your STB-
DVD-VCR will then be ready for use. Confirm the aerial
is plug to ANT.IN.
1
1
Connect the RCA cable as indicated on page 7.
(Connecting Your STB-DVD-VCR to the TV Using
the RCA Audio/Video Cable)
2
TV
2
3
4
Plug the STB-DVD-VCR into the mains.
Result : The Language Set menu is displayed.
Select the required language by pressing the
3
ꢀ
or
❷
buttons.
Press OK to store the language selected.
Result: A message is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-8
Tuning Your Television for the
STB-DVD-VCR
5
6
Press OK button.
You must tune your television for the STB-DVD-VCR
only if you are not using a RCA cable
Press OK to start the auto scanning.
◆
The number of stations automatically stored by
the STB-DVD-VCR depends on the number of
stations found.
◆
To view pictures from your STB-DVD-VCR
when a RCA cable is used, the television must
be set to the audio/video mode (LINE).
◆
“AUTO” appears in the Front Panel.
1
2
Switch on the television.
Auto setup
Switch on the STB-DVD-VCR by pressing
STANDBY/ON on the front of the STB-DVD-VCR or
STANDBY/ON on the remote control.
Please wait
00 %
3
4
Select a programme position on the television to be
reserved for use with your STB-DVD-VCR.
Insert the video cassette in the STB-DVD-VCR.
Check that the STB-DVD-VCR starts playing the
cassette; if not, press
button.
❿
II
5
6
7
Start tuning your television or set the television to
UHF channel 38.
Fine tune the television until the pictures and sound
are obtained clearly.
7
The time and date are displayed automatically.
To set Time and Date, see page 10.
If you cannot find the pictures and sound, or there
is interference from nearby channels, it may be
necessary to change the setting of the STB-DVD-
VCR output channel (see Setting the STB-DVD-
VCR Output Channel on page 14 and
Clock Set
Time
Date
Year
12 : 00
1 / JAN / 2004 THU
Troubleshooting Guide on page 49.
8
When the picture and sound are perfectly clear,
store this channel at the desired programme
position on the television.
Result: That channel is now tuned for use with
your STB-DVD-VCR.
◆
Plug & Auto Set up tunes only the analog
broadcasting.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-9
Setting the Date and Time
Setting the Menu Language
Your STB-DVD-VCR contains a 24-hour clock and
calendar used to:
1
Open “MENU”
After pressing the MENU, press the OK or
❿.
◆
◆
Automatically stop programme recording
Preset your STB-DVD-VCR to record a
programme automatically
Language
:
English
You must set the date and time when:
You purchase the STB-DVD-VCR
Install
User Set
◆
Auto Power Off
Screen Messages
:
:
Off
On
◆
Do not forget to reset the time when you
change clocks from winter to summer
time and vice versa.
◆
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿.
2
3
Select “Language”
Use the
then press the OK or
ꢀ
or
❷
buttons to highlight Language,
❿.
Language
:
English
Press the buttons to select language you
ꢀ
or
❷
want, then press the OK button.
Install
User Set
Auto Power Off
Screen Messages
:
:
Off
On
2
3
Press the corresponding
the Clock option.
ꢀ
,
❷
buttons to select
Press the OK or
❿
to select this option.
Result: The Clock Set menu is displayed.
4
On completion, press RETURN to exit the menu.
Clock Set
Time
Date
Year
12 : 00
1 / JAN / 2004 THU
4
5
Press
month and year.
Result: The option selected highlight.
➛
or
❿
to select the hour, minutes, day,
Press the
the value.
ꢀ
or
❷
buttons to increase or decrease
Result: The day of the week is displayed
automatically.
◆
You can hold the
more quickly through the values.
ꢀ
or
❷
buttons down to scroll
6
On completion, press RETURN to exit the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-10
Presetting the Stations Automatically
You do not need to preset the stations if you
5
Press OK to start the auto scanning.
◆◆◆
have already set them automatically (see Plug &
Auto Set Up on page 8).
Your STB-DVD-VCR contains a built-in tuner used to
receive television broadcasts.
You must preset the stations received through the tuner.
This can be done:
◆
◆
◆
Plug & Auto Set up (see page 8)
Automatically
Manually (see page 12)
You can store up to 80 stations.
Auto Setup
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿.
Please Wait
15%
Language
:
English
Install
User Set
Auto Power Off
Screen Messages
:
:
Off
On
Result:
◆
◆
The Please Wait indication highlight on
the television screen.
The first frequency band is scanned and
the first station found is displayed and
stored.
◆
◆
The STB-DVD-VCR then searches for the
second station and so on.
When the automatic scanning procedure
has finished, the STB-DVD-VCR switches
automatically to programme 1.
2
3
Press the corresponding
the Install option.
ꢀ
,
❷
buttons to select
Press the OK or
❿
to select this option.
Result: The Install menu is displayed.
◆
The number of stations automatically stored by
the STB-DVD-VCR depends on the number of
stations found.
Install
Auto Setup
Manual Setup
6
If you wish to cancel the auto scanning before the
end, press the MENU button to exit the menu.
◆◆◆
Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception
and delete the ones no longer required (see page
13).
4
Press the corresponding
Auto Setup is selected.
ꢀ
or
❷
buttons, until the
And then press the OK or
❿ to select this option.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-11
Presetting the Stations Manually
8
9
Press the
➛
or
❿
buttons to start scanning channel.
You do not need to preset the stations manually if
◆◆◆
Result: The frequency band is scanned and the first
station found is displayed.
you have already set them automatically.
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿.
Press the
ꢀ
or❷
buttons until the NAME is selected.
The station name is set automatically from the
broadcast signal.
2
Press the corresponding
Install option.
ꢀ
,❷buttons to select the
10 To change the programme’s name, press the
button.
❿
3
Press the OK or
Result: The Install menu is displayed.
❿
to select this option.
Result: The first letter of the name flashes.
11 To...
Then...
Install
Auto Setup
Manual Setup
38
Select a character Press the
ꢀ
or
❷
button until
the required character is
displayed (letters, numbers or “-”
character).
Move to the next or Press the
previous character respectively.
➛
or
❿
buttons
4
5
Press the corresponding
Manual Setup option is selected.
ꢀ
or
❷
buttons, until the
12 If you...
Then...
Press the OK or to select a Manual Setup option.
❿
Wish to store the
station displayed
◆
◆
Press the
until the MFT is selected.
Press the buttons to
ꢀ
or
❷
buttons
Result: The TV STATION TABLE menu is displayed.
➛
or
❿
adjust the picture, if necessary.
TV STATION TABLE
◆
◆
Press OK to store the station
PR
1
CH
NAME
Do not wish to
store the station
displayed
Press the
until the CH is selected.
Press the or buttons to
ꢀ
or❷ꢁbuttons
2
3
4
◆
➛
❿
5
go on scanning the
frequency band and display
the next station
SWAPPING : OK
RETURN
DELETE
:
CLEAR
◆
Go back to the beginning of
Step 9
6
7
Press the
number as required.
ꢀ
or
❷
buttons to select a programme
Press the button to preset the station.
Result: The MANUAL TUNING menu is displayed.
❿
13 Repeat this procedure from Step 6 onwards, until
all the required stations have been stored.
14 On completion, press the RETURN button three
times to exit the menu.
MANUAL TUNING
PR
:
:
:
:
CH
- - -
-
MFT
NAME
- - - -
MEMORY
:
OK
RETURN
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-12
Changing the Preset Station Table
Clearing a Preset Station
You can rearrange the Station Table and give different
programme numbers to the stations listed according to
your own preferences.
If you have stored a TV station:
◆◆
◆
That you do not require
At the wrong programme position
you can cancel it.
◆
1
2
3
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿.
Press the corresponding
the Install option.
ꢀ
,❷
buttons to select
1
2
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿.
Press the OK or
❿
buttons to select this option.
Press the corresponding
the Install option.
ꢀ
,❷
buttons to select
Result: The Install menu is displayed.
Install
3
Press the OK or
Result: The Install menu is displayed.
❿
to select this option.
Auto Setup
Manual Setup
38
Install
Auto Setup
Manual Setup
38
4
5
Press the corresponding
Manual Setup option is selected.
Press the OK or button to select this option.
ꢀ
or
❷
buttons, until the
❿
Result: The TV STATION TABLE menu is displayed.
4
5
Press the corresponding
Manual Setup option is selected.
ꢀ
or
❷
buttons, until the
TV STATION TABLE
PR
1
CH
27
NAME
- - - -
Press the OK or to select a Manual Setup option.
❿
2
Result: The TV STATION TABLE menu is displayed.
3
4
5
TV STATION TABLE
SWAPPING : OK
RETURN
PR
1
CH
NAME
DELETE
:
CLEAR
2
3
4
TV STATION TABLE
NAME
5
PR
1
CH
27
SWAPPING : OK
RETURN
DELETE
:
CLEAR
2
3
- - - -
4
5
6
Press the corresponding
required preset TV station (PR) is selected.
ꢀ
or
❷buttons, until the
SWAPPING : OK
RETURN
DELETE
: CLEAR
7
8
Press the CLEAR button.
6
7
Press the corresponding
ꢀ
or
❷
buttons, until the
Repeat the same procedure from Step 6 onwards
until all the required stations have been cleared.
required preset TV programme is selected.
Result: The selected station is displayed at the
same time on the television screen.
To change the programme number assigned to a
station press the OK button on the remote control.
(For example, To move a TV station in programme
1 to programme 3)
9
On completion, press the RETURN button four
times to exit the menu.
8
9
Press the
ꢀ
or
❷
buttons to select required
position. And then press OK again to swap the
position.
On completion, press the RETURN button four
times to exit the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-13
Setting the STB-DVD-VCR Output
Channel
Selecting the Colour Mode
Your STB-DVD-VCR output channel may need to be
changed if the pictures suffer from interference or if
your TV cannot find the pictures.
Also, you can change the STB-DVD-VCR output
channel to adjust the frequency in which information is
displayed on the screen.
Before recording or playing back a cassette, you can
select the required system standard.
Otherwise, the system automatically selects the
reception standard when you select AUTO.
◆◆◆
◆
When playing back a cassette, the standard is
automatically selected by the STB-DVD-VCR.
When you playback an NTSC-recorded tape on
this STB-DVD-VCR make a setting on the
colour system according to your TV.
If your TV is Multi System TV (NTSC 4.43
compatible), set NT4.43 and you can record
NT4.43.
◆
1
2
3
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿.
Press the corresponding
the Install option.
ꢀ
,
❷
buttons to select
Press the OK or
❿
to select this option.
Result: The Install menu is displayed.
1
2
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿.
Install
Press the corresponding
ꢀ
,
❷
buttons to select
CH 28
Auto Setup
Manual Setup
38
the User Set option.
:
CH 38
:
3
Press the OK or
Result: The User Set menu is displayed.
❿
to select this option.
CH 69
User Set
Auto
Colour System
IPC
G-Code Extend
:
:
:
Auto
On
Off
PAL
MESECAM
B/W
4
5
Press the
CH option is selected.
ꢀ
or
❷
buttons, until the VCR Output
Select the required output channel (CH28~CH69)
by pressing the OK or
❿
buttons
◆◆◆CH28 .. CH38
◆
◆ .. CH69
4
5
Press the corresponding
Colour System option is selected.
ꢀ
or ❷ꢁbuttons, until the
6
On completion, press RETURN to exit the menu.
Then tune your television again (see page 9).
Press the OK or button to select
❿
Auto PAL ◆◆MESECAM ◆◆B/W.
◆
Auto When playing back a cassette, the system
standard is automatically selected by the
STB-DVD-VCR.
B/W Black and White
6
On completion, press RETURN three time to exit
the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-14
Intelligent Picture Control
G-CODE Extend
To prevent delays or over-runs the STB-DVD-VCR has a
function called G-CODE EXTEND allowing you to
extend the recording time by up to 60 minutes.
The Intelligent Picture Control Feature allows you to
adjust the sharpness of the image automatically,
according to your own preferences.
1
2
After pressing the MENU, press the OK or
❿.
1
During playback, press the MENU button on the
remote control.
Result: The Setup menu is displayed.
Press the corresponding
ꢀ,
❷
buttons to select
the User Set option.
2
3
4
Press the OK or
Result: The Setup menu is displayed.
❿.
3
Press the OK or
Result: The User Set menu is displayed.
❿
buttons to select this option.
Press the corresponding
the User Set option.
ꢀ
,
❷
buttons to select
User Set
Colour System
IPC
G-Code Extend
:
:
:
Auto
On
Off
Off
10
20
30
40
50
60
Press the OK or
Result: The User Set menu is displayed.
❿
buttons to select this option.
User Set
Colour System
IPC
G-Code Extend
:
:
:
Auto
On
Off
On
Off
4
5
6
Press the corresponding
G-Code Extend option is selected.
ꢀ
,
❷
buttons, until the
Press the OK or buttons to set the G-Code
❿
Extend time by increments of 10 minutes.
To turn off, press OK or
❿
buttons repeatedly until
5
6
Press the corresponding
IPC option is selected.
ꢀ
or
❷
buttons, until the
Off shows.
Press the OK or
❿
buttons to select the IPC
(intelligent picture control) option.
◆
When intelligent picture control mode is ON, the
sharpness of the image is adjusted
automatically.
7
8
To adjust the sharpness manually, press the
button to turn the IPC mode OFF.
❷
Press the
➛
or
❿
buttons until the picture is
displayed according to your preferences.
◆
If you do not press a button within ten seconds,
the PICTURE menu disappears automatically.
9
On completion, press RETURN three times to exit
the menu.
◆
You can use the IPC function with ease by
using the ANGLE key on the REMOCON.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-15
Auto Power off
Screen Messages
Your STB-DVD-VCR displays most information both on
the STB-DVD-VCR and the television.
You can choose to display or hide this information on
the television screen (except for the SEARCH,
Programming MENU and Timer functions, which
cannot be hidden).
The Auto Power Off feature automatically turns off
your STB-DVD-VCR if no signal is received and you do
not press any button for the selected time.
1
2
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿.
Press the corresponding
ꢀor
❷
buttons, until the
1
2
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿.
Auto Power Off option is selected.
Press the corresponding
ꢀor
❷
buttons, until the
Screen Messages option is selected.
Language
:
English
Install
User Set
Off
Auto Power Off
Screen Messages
:
:
Off
On
1Hour
2Hour
3Hour
Language
:
English
Install
User Set
Auto Power Off
Screen Messages
:
:
Off
On
On
Off
STB
3
4
Press the OK or
of Auto Power Off interval.
Off 1Hour 2Hour
❿
buttons, until you select the time
◆
◆
◆
◆
3Hour
3
4
To...
Display on-screen information On is displayed.
Hide on-screen information Off is displayed.
Press OK or
❿, until...
On completion, press RETURN twice to exit the
menu.
On completion, press RETURN twice to exit the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-16
Selecting the Cassette Type
Selecting the Recording Speed
If you wish to use the tape counter to display the time
remaining on a cassette, you must indicate the type of
cassette inserted.
You can record a cassette at two different speeds:
◆
◆
SP (Standard Play)
LP (Long Play)
In Long Play modes:
1
2
After pressing the MENU press the corresponding
buttons to select the VCR option.
◆
◆
Each cassette lasts twice as long
The recording is of a slightly lower
quality
ꢀ,
❷
Press the OK or buttons to select this option.
Result: The VCR Setup menu is displayed.
Press the corresponding or buttons, until the
Tape Select option is selected.
❿
To record a cassette... Press the SPEED button on the
remote control, until...
3
ꢀ
❷
In standard play mode SP is displayed.
VCR Setup
E180
E240
E260
E300
In long play mode
LP is displayed.
Tape Select
:
E180
Off
Repeat Play
VCR Function
:
T
ype
Recording Time (in SP)
180 mins. or 3 hours
STB
E-180
E-240
E-260
E-300
240 mins. or 4 hours
260 mins. or 4 hours and 20 mins.
300 mins. or 5 hours
4
5
Press the OK or
required, until the correct cassette length is
displayed.
❿
buttons as many times as
ꢁ
E180
ꢁ
ꢂ
E240
E260
E 300
ꢂ
Protecting a Recorded Cassette
Press RETURN twice to exit the menu.
Video cassettes have a safety tab to prevent accidental
erasure. When this tab has been removed, you cannot
record on the tape.
Repeat Play
1
2
If you wish to protect a cassette, break off the tab
using a small screwdriver.
You can set repeat play to repeat the tape continuously
from beginning to end.
To re-record over a protected cassette (safety tab
broken), cover the hole with adhesive tape.
VCR Setup
Tape Select
:
E180
Off
Off
On
Repeat Play
VCR Function
:
STB
To...
Press OK or
❿, until...
Repeat play
Do not wish to repeat play
On is displayed.
Off is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-17
Recording a Programme
Immediately
Recording a Programme with
Automatic Stop
Before recording a programme, you must have preset
the corresponding station (unless you are recording via
an external video source). If you have not done so,
refer to pages 11.
This function enables you to record up to nine hours
(LP) of programmes.
Your STB-DVD-VCR stops automatically after the
requested length of time.
1
2
Switch on the television.
1
2
Switch on the television.
To monitor the programme being recorded, select
the television channel reserved for use with your
STB-DVD-VCR (or the LINE input if used).
To monitor the programme being recorded, select
the television channel reserved for use with your
STB-DVD-VCR (or the LINE input if used).
3
4
Insert the cassette on which the programme is to be
recorded, with the window visible and the safety tab
intact or the opening covered with adhesive tape.
3
4
Insert the cassette on which the programme is to
be recorded, with the window visible and the safety
tab intact or the opening covered with adhesive tape.
Select:
Select:
◆
The station to be recorded using the PROG
or ) buttons and SELECT (VCR or STB)
◆
The station to be recorded using the PROG
or ) buttons and SELECT (VCR or STB)
(
(
buttons or
buttons or
◆
The LINE1, LINE2 source using the INPUT
SEL. button for external video source
◆
The LINE1, LINE2 source using the INPUT
SEL. button for external video source
Result: The station number is displayed and the
programme can be seen on the
television.
Result: The channel number is displayed and the
programme can be seen on the television.
5
6
Select the recording speed by pressing the SPEED
button as many times as required (see page 17).
5
6
Select the recording speed by pressing the SPEED
button as many times as required (see page 17).
Hold the REC button ( ) down for a while to start
◆
Hold the REC button ( ) down for a while to start
◆
recording.
recording.
Result: The record indicator appears on the
television screen and STB-DVD-VCR
display. An index is recorded on the tape
Result: The record indicator appears on the
television and STB-DVD-VCR display. An
index is recorded on the tape (see page
24).
7
Press the REC button ( ) several times to increase
◆
the recording time in:
7
To stop recording, press once.
◆
◆
◆
30-minute intervals up to four hours
1-hour intervals up to nine hours
◆
◆
If your STB-DVD-VCR ejects the cassette
when you start recording, check to make sure
that the cassette’s safety tab is intact or that
the opening (created by a broken safety tab) is
covered with adhesive tape.
Result: The length is displayed on the television
displays. The selected programme is
recorded for the length of time requested.
At the end of that time, the STB-DVD-VCR
stops recording automatically and power off.
◆
◆
◆
If you reach the end of the tape while
recording, the cassette rewinds automatically.
8
If you wish to cancel the recording before the end,
press STANDBY/ON.
If STB view changes to VCR view during
recording, the change of channel is impossible.
◆
◆
If the end of the tape is reached while recording:
◆
The recording stops and power off.
VCR function key is not operated for Play, FF,
REW on STB view.
This function is not available in DVD recording
LENGTH 2:30
SET LENGTH :
PRESS REC
◆
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-18
Using the G-CODE Feature
Before presetting your STB-DVD-VCR:
3
Press the OK button.
Result: The information concerning the programme
is displayed.
◆
Switch on both the television and your STB-DVD-
VCR
◆
◆
Check that the date and time are correct
Insert the cassette on which the programme is to
be recorded (safety tab intact)
◆
When using the G-Code function for the
first time with stored stations, the programme
number flashes. This one time, you must enter
the station number manually by pressing the
Up to six programmes can be preset.
ꢀor
❷
buttons. Refer to the following page if:
1
To enter a G-Code, press the TIMER button.
Press the
ꢀor
❷
and OK or
❿
buttons to select
G-Code
Result: A message is displayed to allow you to
enter the G-Code code.
◆
If all six programmes have been set, the
message Timer is full is displayed. Refer to
page 22 if you wish to cancel a preset recording.
Timer Method
Standard
G-Code
◆
◆
The programme number or times flash
You wish to modify the programme
4
5
If the programme and times are correct, press the
RETURN button.
Press the STANDBY/ON button to activate the
timer.
G-Code
6
Refer to page 21~22 if you wish to:
◆
Check that your STB-DVD-VCR has been
programmed correctly
Code
Code
:
:
0 - 9
Correct
◆
Cancel a preset recording
◆
The numbers next to each TV programme listing
are G-Code code numbers, which allow you to
programme your STB-DVD-VCR instantly with
the remote control. Tap in the G-Code code for
the programme you wish to record.
2
Press the numeric buttons to enter the code
opposite the programme that you wish to record in
your television magazine.
◆
If you wish to correct the G-Code code that
you are entering:
™G-Code is a trademark of Gemstar Development
Corporation. The G-Code system is manufactured under
licence from Gemstar Development Corporation.
◆
Press the
corrected is cleared
Enter the correct digit
➛
button until the digit to be
◆
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-19
Modifying G-code Programming
If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press MENU a second time to confirm.
If you wish to...
Then...
Select an input source other
than the tuner (LINE 1 or LINE 2)
◆
◆
Press the
➛
or
❿
buttons, until the PR selection flashes.
Press the INPUT SEL. button one or more times to change the
input source selection.
Result: The programme number is replaced by:
•
The LINE 1 or LINE 2 source using the INPUT
SEL. button for a satellite tuner or external video
source
◆ The input source must be selected before changing any other
value.
Record a programme every day
(Monday to Sunday) at the same time
◆
◆
Press the
Press the
displayed.
➛
or
or
❿
buttons, until the DAY selection flashes.
buttons, until the DLY (Daily) value is
ꢀ
❷
Record a programme every week
on the same day and at the same time
◆
◆
Press the
Press the
➛
or
or
❿
buttons, until the DAY selection flashes.
buttons, until the W- (Week) value is
ꢀ
❷
displayed, followed by the required day.
Example: W-SA (Weekly Saturday)
Extend the recording time
Select the recording speed
◆
◆
Press the
Press the
time.
➛
ꢀ
or
or
❿
❷
buttons, until the STOP selection flashes.
buttons to increase or decrease the stop
◆
◆
Press the
flashes.
Press the
displayed:
➛
or
or
❿
buttons, until the recording speed selection
buttons until the correct indication is
ꢀ
❷
•
•
•
AUTO (Auto Tape Speed Select) : see page 21
SP (Standard Play)
LP (Long Play)
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-20
Using the Timer Programming
Feature
The Timer Programming feature allows you to preset
the STB-DVD-VCR to record a programme up to one
month before that programme is to be broadcast. Up to
six programmes can be preset.
12 Select the required recording stop time by pressing
the or❷ꢁbuttons, following the same procedure
as when selecting the recording start time.
ꢀ
13 Press to select the recording speed.
❿
◆
Before presetting a recording, check that the
date and time are correct.
14 Press the ꢀor❷ buttons to select the SP
(Standard Play), LP (Long Play), Auto (Auto Tape
1
Insert the cassette and press TIMER on the remote
control.
speed Select) recording speeds.
15 When you have finished, press the RETURN button.
Result: The Timer method is displayed.
16 Press the STANDBY/ON button to activate the timer.
Result: Before starting recording, the STB-DVD-
VCR compares the timer duration with the
remaining time on the cassette.
Timer Method
Standard
G-Code
◆
Auto Tape Speed select. The STB-DVD-VCR’s
“Auto Tape Speed select” function compares the
duration of the timer recording to the actual
recording time remaining on the tape loaded.
If there is insufficient tape to complete a timer
recording in AUTO mode, the STB-DVD-VCR
automatically switches to LP mode to record the
whole programme.
2
Press the OK button to select Standard option.
Result: The TIMER PROGRAMMING menu is
displayed.
Checking a Preset Recording
You can check your preset recordings:
◆
When you have finished presetting the STB-DVD-
VCR
◆
If you have forgotten which programmes will be
recorded
3
4
Press
❿
to select the input source.
1
Press TIMER on the remote control.
Result: The timer selection is displayed.
Select the required station by pressing the
buttons or INPUT SEL. to select the LINE 1, LINE 2
input sources.
ꢀ,❷
2
Press the OK button to select Standard option.
Result: The TIMER PROGRAMMING menu is
displayed.
5
6
Press
❿
to select the recording day.
Select the required day by pressing the
buttons.
ꢀor❷ꢁ
3
4
Press the
ꢀor❷
buttons to select the required
programme.
7
8
Press
❿
to select the recording start time.
Press the
➛
or
❿
buttons to select and change any
values as required. For more details, refer to the
previous page.
Select the required hour value by pressing the
ꢀor❷
buttons.
5
On completion, press RETURN twice.
9
Press
❿
to select the minutes.
10 Select the required minute value by pressing the
ꢀor❷
buttons.
11 Press
❿
to select the recording stop time.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-21
Adjusting Picture Alignment
Manually
Cancelling a Preset Recording
You can cancel any programmes that are:
The Picture Adjustment feature allows you to adjust the
alignment manually to obtain the best possible picture.
◆
◆
Incorrect
No longer required
When noise bars or streaks appear during playback,
adjust alignment manually by pressing the TRK buttons
until the picture is clear and stable.
1
Press TIMER on the remote control.
Result: The timer selection is displayed.
Result:
◆
◆
◆
The tracking bar appears.
The image is adjusted.
The tracking bar disappears when you
release the button.
2
Press the OK button to select Standard option.
Result: The TIMER PROGRAMMING menu is
displayed.
3
4
Select the programme to be cancelled by pressing
the
ꢀ
or
❷
buttons.
Press the CLEAR button to cancel the selected
programme.
Selecting the Audio Output Mode
Result: All the recording information is deleted and
the broadcast will not be recorded.
5
On completion, press RETURN twice.
You can select the mode in which the sound is
reproduced on the loudspeakers and AV outputs.
The following options are available.
Playing a Cassette
Option
Description
L
Used to listen to the sound on the left Hi-Fi
channel.
R
Used to listen to the sound on the right
Hi-Fi channel.
This function allows you to play back any pre-recorded
cassette.
MIX
Used to listen to the mixed sound of the
Hi-Fi and normal channels.
1
Switch on both the television and your STB-DVD-
VCR.
MONO
L R
Used to listen to the sound on the normal
mono channel.
2
Insert the video cassette to be played. If the safety
tab on the cassette is intact, press ❿ll
.
Otherwise, the cassette is played automatically.
Used to listen to Hi-Fi stereo sound on the
left and right channels.
◆◆◆When playing back tapes recorded in
Hi-Fi, the sound switches to Hi-Fi after
five seconds of Mono.
◆◆◆When a cassette is loaded, the tape position is
optimized automatically to reduce disturbance
(Digital Auto Tracking).
When playing a cassette, if the end of the tape
is reached, the cassette is rewound
automatically.
NTSC tapes can be played back but cannot
be recorded with this STB-DVD-VCR.
To select the sound mode, simply press the AUDIO
button on the remote control until the required option is
displayed.
3
To...
Then press...
L
R
MIX
Stop the playback
Eject the cassette
(STOP).
◆
L R
MONO
(EJECT).
◆
The selection of audio output is impossible on STB
view.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-22
Playing a Sequence at Variable
Speeds
Playing a Cassette in Slow Motion
You can play a cassette in slow motion.
You can vary the playback speed using the Shuttle
function (up to nine times the normal speed).
◆◆◆No sound is heard when playing back a
cassette in slow motion.
Example: You wish to analyze a sportsperson’s
technique, movement by movement.
1
Press:
◆
◆
◆
◆
❿ll to start playing the cassette
❿ll button one more time to make still mode.
❿❿ to start SLOW mode.
➛➛ or ❿❿ button as many times as required to
decrease or increase the speed respectively
To return to the normal speed, press the ❿ll button
twice.
The Shuttle function is available on the Remote control
◆◆◆No sound is heard when playing a sequence at
variable speeds.
1
◆
◆
◆
Press:
❿ll during playback
4 buttons to play the cassette backwards
6 buttons to play the cassette forwards
◆
2
When playing back in slow motion, picture
interference may occur.
Press the TRK buttons to minimize this effect.
2
Each time you press a the 4 or 6 buttons, the
speed is changed as shown in the following
illustration.
◆
When you have been using the Slow Motion
function for more than about two minutes, the
STB-DVD-VCR will automatically play to protect
the:
REVERSE REVERSE REVERSE
SLOW
STILL MOTION MOTION PLAY
X1/10 X1/5
SLOW
PLAY PLAY PLAY
X3 X5 X9
PLAY
X9
PLAY
X5
PLAY
X3
◆
Cassette
◆
Video heads
Playing a Sequence Frame by
Frame
You can
◆
Stop the cassette at a given frame (image)
◆
Advance one frame at a time
◆◆◆No sound is heard when playing back frame by
frame.
1
◆
◆
◆
Press:
❿ll to start playing the cassette
❿ll button one more time to make still mode.
INPUT SEL to advance frame by frame
2
To return to normal playback, press ❿ll.
◆◆◆Vertical stability: When playing back frame by
frame, interference may be seen on the screen.
Press the TRK buttons to minimize this effect.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-23
Searching for a Specific Sequence
Each time you record a cassette on this STB-DVD-VCR,
an “index” is automatically marked on the tape when
recording starts.
End Search
Use this feature when you want to search for a blank
position to record a program on a cassette.
The Search function allows you to fast-forward or
rewind to a specific index and start playback from that
point. Depending on the direction selected, the indexes
are numbered as follows:
The VCR will fast forward, searching for a blank
position, and then automatically stop at that position.
If the VCR reaches the end of the tape during end
search, the tape will be ejected.
1
After pressing the SEARCH, press the
corresponding or buttons, until the End
Search option is selected.
Prev
Seq.
Seq. being
played
Next
Seq.
ꢀ
❷
etc.
etc.
2
1
1
2
◆◆◆This STB-DVD-VCR uses a standard indexing
system (VISS). As a result, it will recognize any
indexes marked by other VCRs using the same
system and vice versa.
STB
Go To [0:00:00] Stop
2
Press the OK or
❿.
Use this feature when you want to search for the
0:00:00 counter position on a cassette. Press the
CLEAR button at the point on the tape where you want
to set the counter to 0:00:00.
Intro Scan
The VCR will rewind or fast forward, searching for the
0:00:00 counter position, and then automatically stop at
that position.
1
After pressing the SEARCH, press the
corresponding or buttons, until the Intro Scan
option is selected.
ꢀ
❷
2
3
Press the OK or
❿.
1
After pressing the SEARCH, press the
corresponding or buttons, until the Go To
[0:00:00] option is selected.
Press the ➛➛ or ❿❿ buttons depending on the
direction where your desired programme is located.
ꢀ
❷
4
5
When an Index mark is found, the STB-DVD-VCR
will playback the tape for 5 seconds, after which it
will continue searching for the next Index mark.
If you want to watch the tape from a particular
Index, simply press
❿
II
twice.
STB
INTRO SCAN:
➛
➛ꢁꢁꢁꢁ❿
❿
2
Press the OK or
❿.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-24
Using the Tape Counter
Searching for a Specific Sequence
The tape counter:
Index Skip Search
◆
◆
◆
Indicates the elapsed time in the play and record
modes (hours, minutes and seconds)
Is reset when a cassette is inserted in the STB-DVD-
VCR
This feature will enable you to fast forward/rewind to a
specific point on a tape: E.g. if you have recorded 3
different programmes on a tape and you have rewound
the tape to the beginning, by using this feature you can
go directly to the start of programme 2 simply by
pressing the SEARCH button.
Allows you to find the beginning of a sequence easily
◆
If the remaining time is to be calculated
correctly, you must indicate the type of cassette
being used.
1
After pressing the SEARCH, press the
corresponding or buttons, until the Intro
Scan option is selected.
ꢀ
❷
1
Insert a cassette in your STB-DVD-VCR.
2
3
Press the OK or
❿.
2
To set the tape counter to zero at the beginning of a
sequence:
Press the ➛➛ or ❿❿ buttons twice more.
This will take you directly to the start of the desired
programme is located.
◆
◆
Press INFO. twice to display the counter
Press CLEAR when you want to set the tape
counter to zero
4
5
These Index searches can be made forwards:
(press ❿❿) or backwards: (press ➛➛).
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆ ◆
◆
◆
(➛➛ -20
0
+20 ❿❿✌
To cancel an Index search simply press the
❿
II
or
button.
◆
0:00:00
INDEX SEARCH :
➛➛
-06
3
When you are ready,
◆
◆
◆
Start playback or Recording.
Press the button.
To fast-forward or rewind to the sequence at
◆
which the counter was set to zero, press ➛➛ or
❿❿
.
◆
Some STB-DVD-VCR information, such as the
counter, can be displayed on the television screen
(unless you have deactivated the Screen messages
mode; refer to page 16).
Press INFO.:
◆
Once to display the current function,
programme number, recording speed, date,
time and counter
◆
◆
Twice to display the counter only
Three times to display the time remaining on
the cassette
◆
Four times to clear the display
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-25
Connecting an RCA Audio/Video
Input Cable
Recording from Another VCR or
Camcorder
You can connect other audio/video equipment to your
STB-DVD-VCR using audio/video cables if the
appropriate outputs are available on the equipment
chosen.
You can copy a cassette to your STB-DVD-VCR from
another video source, such as another VCR or a
camcorder.
◆
It is an infringement of copyright laws to copy
prerecorded cassettes or to re-record them in any
form without the permission of the owners of the
corresponding copyright.
Examples:
◆
You wish to copy a video cassette with
the help of a second VCR.
◆
You wish to play back and/or copy
pictures taken with a camcorder .
1
Connect the other audio/video equipment, from
which the cassette is to be copied, to the
appropriate RCA audio and video input connectors
on the front of your STB-DVD-VCR, as indicated on
page 26.
◆
Make sure that both the television and the STB-DVD-
VCR are switched off before connecting the cables.
1
Connect one end of the RCA video cable into
the VIDEO INPUT socket on the front of the STB-DVD-
VCR.
2
3
Insert a blank cassette in your STB-DVD-VCR.
Insert the pre-recorded cassette in the other video
source (VCR or camcorder).
2
3
Plug the other end of the video cable into the
appropriate output connector on the other system
(VCR or camcorder).
4
Press the INPUT SEL. button to select the
appropriate input on your STB-DVD-VCR:
Connect one end of the RCA audio cable supplied
into the AUDIO INPUT sockets on the front of the
STB-DVD-VCR.
◆
LINE 2 for the front RCA input and LINE 1 for
the rear RCA input.
◆◆◆Take care to respect the colour coding of the
5
6
Start playing back the cassette to be copied.
Hold REC down for a while to start recording
on your STB-DVD-VCR.
left and right channels.
( )
◆
4
Plug the other end of the audio cable into the
appropriate output connectors on the other system
(VCR, camcorder or Hi-Fi sound system).
7
When you have finished recording, press
on
◆
both other audio/video equipment and STB-DVD-
VCR.
◆
If you wish to view the cassette being copied:
◆
Your STB-DVD-VCR must be connected as
usual to the television (see page 7 for further
details)
1
3
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-26
Using the TV Buttons on the Remote Control
Button
Function
Your STB-DVD-VCR remote control will work with
Samsung televisions and compatible brands.
TV STANDBY/ON Used to switch the television on
and off.
To determine whether your television is compatible,
follow the instructions below.
TV or VCR
Used to switch between the TV and
VCR modes.
1
2
3
Switch your television on.
INPUT SEL.
Used to select an external source.
Point the remote control towards the television.
TV VOL + or –
Used to adjust the volume of the
television.
Hold down the TV button and enter the two-figure
code corresponding to the brand of your television,
by pressing the appropriate numeric buttons.
PROG
Used to select the required
programme.
(
or
)
Brand
SAMSUNG 01 to 06
AKAI 09, 23
GRUNDIG 09, 17, 21
LOEWE 02
Codes
Brand
Codes
MUTE
Used to mute the volume of the
TV.
PHILIPS 02, 20, 22
SABA
SONY
13, 14, 22 to 24
15, 16
◆
The various functions will not necessarily work
on all televisions. If you encounter problems,
operate the television directly.
THOMSON 13, 14, 24
PANASONIC 08, 23 to 27 TOSHIBA 07, 16 to 19, 21
◆
TV/VCR Key of remote controller does not
operate.
Result: If your television is compatible with the
remote control, it will switch off. It is now
programmed to operate with the remote
control.
◆
If several codes are indicated for your
television brand, try each one in turn until you
find one that works.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-27
Choosing a Connection
Setting Up the Language Features
The following shows examples of connections commonly
used to connect the STB-DVD-VCR player with a TV and
other components. It is only available for DVD. The VCR
out can not watch by this connection. The STB does not
output digital signals.
If you set the player menu, disc menu, audio and
subtitle language in advance, they will come up
automatically every time you watch a movie.
Using the Disc Menu Language
Connection to
an Audio System
Connection to an
Television
1
2
With the unit in Stop mode, press the MENU button.
Select DVD using buttons, then OK or button
ꢀ,❷
❿
Setup
Setup
Display Setup
Setup
Television
:
STB
Dolby Digital
Decoder
Digital Audio
Input Jack
COAXIAL
OPTICAL
3
Select Language Setup using
ꢀ,❷
buttons, then
press the OK or
❿
button.
Language Setup
Disc Menu
Audio
:
:
:
English
English
Automatic
Subtitle
or
or
4
5
Select Disc Menu using
the OK or ❿ꢁbutton.
ꢀ,❷
buttons, then press
COAXIAL
OPTICAL
Use the
ꢀ,❷
buttons to select English.
- Select “Others” if the language you want is not listed.
Disc Menu Language
Disc Menu
Digital
Audio out
Jack
S-Video
Jack
Component
Video Jack
6
Press the OK button.
- English is selected and the screen returns to
Language Setupmenu.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-28
Setting Up the Language Features
Using the Audio Language
Using the Subtitle Language
1
2
3
With the unit in Stop mode, press the MENU button.
Select DVD using buttons, then OK or ❿ꢁbutton.
Select Language Setup using buttons, then
1
2
3
With the unit in Stop mode, press the MENU button.
Select DVD using buttons, then OK or ❿ꢁbutton.
Select Language Setup using buttons, then
ꢀ
,
❷
ꢀ,❷
ꢀ
,
❷
ꢀ,❷
press the OK or
❿
button.
press the OK or
❿
button.
Language Setup
Language Setup
Disc Menu
Audio
:
:
:
English
English
Automatic
Disc Menu
Audio
:
:
:
English
English
Automatic
Subtitle
Subtitle
4
5
Select Audio using
OK or button.
ꢀ,❷
buttons, then press the
4
5
Select Subtitle using
OK or ❿ꢁbutton.
ꢀ,❷
buttons, then press the
❿
Press the
ꢀ,❷
buttons to select English.
Use the
ꢀ,❷
buttons to select English.
- Select “Original” if you want the default soundtrack
language to be the original language the disc is
recorded in.
- Select “Automatic” if you want the subtitle
language to be the same as the language selected
as the audio preference.
Subtitle Language
Automatic
Subtitle
- Select “Others” if the language you want is not
listed. Some discs may not contain the language
you select as your initial language; in that case the
disc will use its original language setting.
- Select “Others” if the language you want is not
listed. Some discs may not contain the language
you select as your initial language; in that case the
disc will use its original language setting.
6
Press the OK button.
- English is selected and the screen returns to
Language Setup menu.
6
Press the OK button.
- English is selected and the screen returns to
Language Setup menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-29
Setting Up the Audio Options
1
2
With the unit in Stop mode, press the MENU button.
ꢃ
ꢃ
Dynamic Compression
1. On :
2. Off :
To select dynamic compression.
To select the standard range.
Select DVD using
ꢀ,❷
buttons, then OK or ❿ꢁbutton.
PCM Down Sampling
Setup
Setup
1. On :
2. Off :
Select this when the amplifier
connected to the player is not 96KHz
compatible.
In this case, the 96KHz signals will be
down converted to 48KHZ.
Display Setup
Setup
:
STB
Select this when the amplifier
connected to the player is 96KHz
compatible.
3
4
Select Audio Setup using
the OK or button.
ꢀ,❷
buttons, then press
In this case, all signals will be output
without any changes.
❿
Use the buttons to select the desired item.
ꢀ,❷
Then press the OK or
❿
button.
◆
• How to make the SETUP menu disappear or
return to menu screen during set up; Press
Dolby Digital Out
MPEG-2 Digital Out
DTS
RETURN or
➛
button.
• Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
PCM Down Sampling
• “DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
ꢃ
Dolby Digital Out
1. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream : Converts to Dolby Digital Bitstream
(5.1CH). Select Bitstream when using
the Digital Audio Output.
◆◆◆Be sure to select the correct Digital Output or no
audio will be heard.
ꢃ
MPEG-2 Digital Out
1. PCM : Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream : Converts to MPEG-2 Digital Bitstream
(5.1CH or 7.1CH).Select Bitstream
when using the Digital Audio Output.
ꢃ
DTS
1. Off :
2. On :
Doesn’t output digital signal.
Outputs DTS Bitstream via digital
output only. Select DTS when
connecting to a DTS Decoder.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-30
Setting Up the Display Options
1
2
With the unit in Stop mode, press the MENU button.
2. 4:3 Pan Scan : Select this for conventional size
TVs when you want to see the
central portion of the 16:9
Select DVD using
ꢀ,❷
buttons, then OK or
❿
button.
screen. (Extreme left and right
side of movie picture will be cut
off.)
Setup
Setup
3. 16:9 Wide :
You can view the full 16:9
Display Setup
Setup
:
picture on your widescreen TV.
STB
ꢃ
ꢃ
Black Level
Adjusts the brightness of the screen.(On/Off)
NTSC Disc Output
3
4
Select Display Setup using
press the OK or button.
ꢀ,❷
buttons, then
“NTSC” if the screen only has one NTSC-video
entrance. If this is not the case, you can choose
to leave “ PAL 60Hz” as is.
❿
Use the buttons to select the desired item.
ꢀ,❷
Then press the OK or
❿
button.
ꢃ
DVD/STB Out
Component : Sends Component signal from the
RCA JACK.
Display Setup
4:3 L-Box
TV Aspect
:
Black Level
NTSC Disc Output
DVD/STB
S-Video :
Sends S-VIDEO signal from the AV
JACK (S-Video terminal).
:
:
PAL 60 Hz
Component
Video :
Sends COMPOSITE VIDEO signal
from the RCA JACK
ꢃ
TV Aspect
Depending on the type of television you have, you
may want to adjust the screen setting (aspect ratio).
1. 4:3 Letter Box : Select when you want to see
the total 16:9 ratio screen DVD
supplies, even though you have
a TV with a 4:3 ratio screen.
Black bars will appear at the top
and bottom of the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-31
Setting Up the Parental Control
The Parental Control function works in conjunction
with DVDs that have been assigned a rating - which
helps you control the types of DVDs that your family
watches.
Yes
There are up to 8 rating levels on a disc.
1
2
3
With the unit in Stop mode, press the MENU button.
Select DVD using buttons, then OK or button.
Select Parental Setup using buttons, then
press the OK or button.
ꢀ
,❷
❿
ꢀ,❷
❿
Setup
Setup
Display Setup
Setup
:
STB
.
ꢃ
About the Rating Level ;
The Rating Level will work only when Use Password
is set to Yes. To unlock the player, use to
to select Rating Level.
❿
4
Use OK or
❿
to select Yes if you want to use a
select No. Use
Press OK.
ꢀ,❷
password. The Enter Password screen appears.
- Use
ꢀ,❷
to select the level(e.g. Level 6) and
Parental Setup
press OK. Discs that contain Level 7 will now
not play.
No
Yes
Use Password
:
No
- To cancel the rating level, use
No in Use Password.
❿
or OK to select
ꢃ
About the Change Password ;
- Use to select Change Password.
ꢀ,❷
Press OK. The Change Password screen appears.
- Enter your new password. Enter the new password
again.
◆
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or
➛
button.
~
• If you have forgotten your password, see Forget
Password in the Troubleshooting Guide.
5
Enter your password. The Re-Enter Password
screen appears to confirm the password.
Enter your password again. The Parental setup
screen appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-32
Special Playback Features
A/V Receiver Connections
During DVD/CD playback you can select from the
following special playback options. To resume normal
To take full advantage of the movie theater experience
that DVD offers, you may want to connect your STB-
DVD-VCR to a complete Surround Sound system,
including an A/V Receiver and six Surround Sound
speakers.
playback, press the
❿ll button.
1
Still
Press the
playback.
❿ll button on the remote control during
Before You Begin...
• The picture will still and the audio will mute.
• To resume playback, press the ll button.
• If the player is left in Still mode for 5 minutes, it
•
If your A/V receiver is equipped with a Dolby
Digital Decoder, you have the option to bypass the
STB-DVD-VCR’s built-in Dolby Digital Decoder. Use
the Digital Audio Out connection below.
❿
will stop automatically.
2
Skip Forward/Back
While a CD or DVD disc is in Play mode, press the
Skip l➛➛ / ❿❿l buttons on the remote control or
front panel to jump forward and backward through
disc chapters/tracks.
• Skip Forward will jump to the next chapter/track.
• Skip Back will jump to the beginning of the current
chapter/track.
• Press Skip Back again to jump to the beginning of
the previous chapter/track.
ꢂ
ORꢁ
To Digital Audio Input of an A/V
Receiver with a Dolby Digital Decoder
Search Forward/Back
While a disc is in Play mode, press and hold the
1
Digital Audio Out
Connect EITHER an optical cable OR a digital
coaxial cable from the Digital Audio Out jacks on the
back panel of the STB-DVD-VCR to their
corresponding Digital Audio Input jacks on your A/V
Receiver:
➛➛
/
❿❿ buttons on the remote control or front panel
to visually search forward/backward at 2X - 4X - 8X -
16X - 32X - 128X speed. Press
resume normal speed.
❿ll button to
3
4
Slow Motion
During playback, press the
• Optical
• Coaxial
❿ll button to Still the
image. Then use the Search ❿❿ to play in slow
motion at variable speeds.
• Each press increases the slow motion speed
playback to 1/8, 1/4 or 1/2 normal speed.
• Audio is muted during slow motion playback.
• Use whichever connection is available on your
A/V Receiver.
Stop/Resume
• Press the Stop button once to stop playback.
To resume the DVD/CD from the point where the
disc stopped, press the
❿ll button.
• Press the button twice to completely
◆
stop playback. The next time you press
disc will start over from the beginning.
❿ll, the
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-33
Adjusting the Aspect Ratio (EZ View)
If you are using a 4:3 TV
To play back using aspect ratio (DVD)
1
Press the EZ VIEW button.
ꢃ
•
For 16:9 aspect ratio discs
•
The screen size changes when the button is
pressed repeatedly.
4:3 Letter Box
Displays the content of the DVD title in 16:9 aspect
ratio.
The black bars will appear at the top and bottom of
the screen.
•
The screen zoom mode operates differently
depending on the screen setting in the initial DVD
menu.
•
To ensure correct operation of the EZ VIEW
button, you should set the correct aspect ratio in
the initial setup.
•
•
4:3 Pan Scan
The left and right of the screen are cut off and
displays the central portion of the 16:9 screen.
Screen Fit
The top and bottom of the screen are cut off and the
full screen appears. The picture will look vertically
stretched.
If you are using a 16:9 TV
ꢃ
•
For 16:9 aspect ratio discs
•
Zoom Fit
Wide Screen
Displays the content of the DVD title in 16:9 aspect
ratio.
The top, bottom, left and right of the screen are cut
off and the central portion of the screen is enlarged.
ꢃ
•
For 4:3 aspect ratio discs
•
•
Screen Fit
Normal Screen
Displays the content of the DVD title in 4:3 aspect
ratio.
The top and bottom of the screen are cut off. When
playing a 2.35:1 aspect ratio disc, the black bars at
the top and bottom of the screen will disappear.
The picture will look vertically stretched. (Depending
on the type of disc, the black bars may not
disappear completely.)
•
•
Screen Fit
The top and bottom of the screen are cut off and the
full screen appears. The picture would look vertically
stretched.
Zoom Fit
The top, bottom, left and right of the screen are cut
off and the central portion of the screen is enlarged.
Zoom Fit
The top, bottom, left and right of the screen are cut
off and the central portion of the screen is enlarged.
ꢃ
For 4:3 aspect ratio discs
•
Normal Wide
Displays the content of the DVD title in 16:9 aspect
ratio. The picture will look horizontally stretched.
◆
This function may behave differently depending on
the type of disc.
•
Screen Fit
The top and bottom of the screen are cut off and the
full screen appears. The picture will look vertically
stretched.
•
•
Zoom Fit
The top, bottom, left and right of the screen are cut
off and the central portion of the screen is enlarged.
Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars
will appear at the left and right of the screen in order
to prevent the picture from looking horizontally
stretched.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-34
Using the Display Function
When Playing a DVD/CD
To access the desired title when there is more than
one in the disc. For example, if there is more than
one movie on a DVD, each movie will be identified.
1
2
3
During play, press the INFO. button on the remote.
TITLE
Use the
Use the
•
ꢀ
,
❷
buttons to select the desired item.
➛
,
❿
buttons to make the desired setup.
You may use the number buttons of the remote
control to directly access a title, chapter or to start
the playback from the desired time.
Most of DVD discs are recorded in chapters so that
you can quickly find a specific passage.
CHAPTER
TIME
Allows playback of the film from a desired time.
You must ok the starting time as a reference.
Refers to the language of the film soundtrack. In the
example, the soundtrack is played in English 5.1CH.
A DVD disc can have up to eight different
soundtracks.
ENG 5.1CH
ENG
AUDIO
Off
Refers to the subtitle languages available in the disc.
You will be able to choose the subtitles language or,
if you prefer, turn them off from the screen.
SUBTITLE
3D SOUND
A DVD disc can have up to 32 different subtitles.
ENG 5.1CH
ENG
A surround sound effect is generated using only two
front speakers.
Off
ENG 5.1CH
ENG
Off
~
4
To make the screen disappear, press the INFO.
button again.
◆
• What is a Chapter?
Each Title on a DVD is usually divided into
chapters (similar to tracks on an audio CD).
• What is a Title?
A DVD may contain several different titles.
For example, if a disc contains four different
movies, each might be considered a title.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-35
Selecting the Subtitle Language
Changing the Camera Angle
You can select a desired subtitle quickly and easily with
the subtitle button.
Using the ANGLE button
When a DVD contains multiple angles of a particular
scene, you can select the Angle function.
Using the SUBTITLE button
1
2
Press the SUBTITLE button.
Use the ❿ꢁbuttons to select the desired subtitle
language.
Use the buttons to determine whether or not
Press the ANGLE button to see if an ANGLE
➛
,
(
) mark is present at the upper Right hand corner
of the screen.
3
ꢀ
,
❷
1
When an ANGLE mark is shown, press the ANGLE
button, then an ANGLE select icon will appear at the
upper left hand corner of the screen.
the subtitle will be displayed.
• The subtitle languages are represented by
abbreviations.
2
3
Use the
angle.
➛
,
❿
buttons to select the desired screen
To turn off the display, press the ANGLE button
again.
ENG
On
ENG
Off
◆
• This function depends on what languages are
encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
• How to have the same subtitle language come up
whenever you play a DVD; Refer to “Setting Up
the Language Features” on page 29.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-36
Repeat Play
Selecting the Audio Language
Repeat the current track, chapter, title, a chosen section
(A-B), or all of the disc.
You can select a desired language quickly and easily
with the AUDIO button.
When playing a DVD
Using the Audio button
1
2
Press the REPEAT button on the remote.
Repeat screen appears.
1
2
Press the AUDIO button.
Use the buttons to select the desired language
on a DVD.
- The audio languages are represented by abbreviations.
Use the buttons to select Stereo (On CD).
➛
,
❿
Select Chapter, Title or A-B using the
• Press the REPEAT button. Select A-B on screen
with the buttons.
➛
,
❿
buttons.
➛
,
❿
3
➛
,
❿
• Press OK at the point where you want the repeat
play to start (A). The B is automatically highlighted.
• Press OK at the point where you want the repeat
play to stop (B).
DVD
• To terminate the function, press the CLEAR button.
• A-B REPEAT does not allow you to set point (B)
until at least 5 seconds has elapsed after point (A)
has been set.
DVD
Chapter Title A - B
Off
CD
CD
Track Disc A - B
Off
◆
• This function depends on what languages are
encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
• How to have the same audio language come up
whenever you play a DVD ; Refer to “Setting Up
the Language Features” on page 29.
3
4
Press OK.
To return to normal play, press REPEAT again, then
press the buttons to select Off and press OK.
➛
,
❿
• It is available to press CLEAR button on the
remote controller in order to stop REPEAT play.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-37
Using the Mark Function
MP3/WMA Play
This feature lets you mark sections of a DVD so you can
quickly find them at a later time.
When an MP3/WMA Disc is inserted into the DVD
player, the first song file of the first folder plays.
•
If more than two file extensions are present, select
the media of your choice.
Using the Mark Function (DVD)
•
To change the currently playing media, press the
button twice and then press the DISC MENU
button.
1
During play, press the MARK button on the remote.
The Mark icons will be displayed.
◆
•
If no button on the remote controller is pressed for
60 seconds, the menu will disappear and the
selected item will be played.
CLEAR
–
–
1
MP3/WMA Play Function
1
When the first song file is playing, the music file
menu will appear on the right side of the screen.
Up to 8 music folders can be displayed at a time.
If you have more than 8 folders on a disc, press the
2
3
Use the
icon.
➛
,
❿
buttons to move to the desired Mark
➛
,
❿
buttons to bring them up on the screen.
When you reach the scene you want to mark, press
the OK button. The icon will change to a number
(1, 2, or 3).
Total : 1/3
ROOT
..
20020822094
MP3
A
B
C
4
Press the MARK button to turn off the display.
Recalling a Marked Scene
1
2
3
During play, press the MARK button on the remote.
Use the buttons to select a marked scene.
Press the ❿ll buttons to skip to the marked scene.
➛
,
❿
2
Use the
ꢀ
,
❷ꢁor
➛
,
❿
buttons to select the desired
music folder, then press OK.
Use the buttons again to select a
song file.
Press OK to begin playback of the song file.
ꢀ❷ꢁor
,
➛,❿
Clearing a Mark
1
2
During play, press the MARK button on the remote.
Use the buttons to select the mark number
you want to delete.
➛
,
❿
3
Press the CLEAR button to delete a mark number.
Press the MARK button to turn off the display.
◆
• Up to three scenes may be marked at a time.
• Depending on the disc, the mark function may not
work.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-38
MP3/WMA Play
Picture CD Playback
•
•
Select JPEG in the menu to view a Photo CD.
To change the currently playing media, press the
button twice and then press the DISC MENU
button.
If no button on the remote controller is pressed for
60 seconds, the menu will disappear and the
selected item will be played.
CD-R MP3/WMA discs
◆◆
When playing CD-R/MP3 or WMA discs, please
follow all the recommendations for CD-R above,
plus the comments below:
•
ꢃ
Your MP3 or WMA files should be ISO 9660 or
JOLIET format.
ISO 9660 format and Joliet MP3 or WMA files are
compatible with Microsoft's DOS and Windows, and
with Apple's Mac. These two formats are the most
widely used.
1
2
Open the disc tray.
Load the disc on the tray.
Load the disc with the labeled side up.
ꢃ
When naming your MP3 or WMA files do not
exceed 8 characters, and place ".mp3, .wma" as
the file extension.
3
Close the tray.
- The tray closes and you should get a screen that
looks like the one below.
General name format of: Title.mp3. or Title.wma.
When composing your title, make sure that you use
8 characters or less, have no spaces in the name,
and avoid the use of special characters including:
(.,/,\,=,+).
• Use the
controller to select the picture you want to view
and then press the OK button.(Press the button
ꢀ
,
❷
or
➛
,
❿
buttons on the remote
❿
II
ꢃ
Use a decompression transfer rate of at least
128Kbps when recording MP3 files.
if you want to play it in the Slide Show mode.)
• To see the next 6 pictures, press the ❿❿ button.
• To see the previous 6 pictures, press the ➛➛ button.
l
Sound quality with MP3 files basically depends on
the rate of compression/decompression you choose.
Getting audio CD quality sound requires an
analog/digital sampling rate, that is conversion to
MP3 format, of at least 128Kbps and up to 160Kbps.
However, choosing higher rates, like 192Kbps or
more, only rarely give better sound quality.
l
•
•
:
:
Return to the Album Screen.
Each time the OK button is pressed, the
picture rotates 90 degrees clockwise.
Conversely, files with decompression rates below
128Kbps will not be played properly.
•
:
Each time the OK button is pressed, the
picture is enlarged up to 2X.
ꢃ
Use a decompression transfer rate of at least
64Kbps when recording WMA files.
(Normal
ꢁ
2X
ꢁ
Normal)
Sound quality with WMA files basically depends on
the rate of compression/decompression you choose.
Getting audio CD quality sound requires an
analog/digital sampling rate, that is conversion to
WMA format, of at least 64Kbps and up to 192Kbps.
Conversely, files with decompression rates below
64Kbps or over 192Kbps will not be played properly.
•
:
The unit enters slide show mode.
* Press the RETURN button to return to the album screen.
* Before the Slide Show can begin, the picture interval
must be set.
•
:
When this icon is selected and OK is
pressed, the pictures change automatically
with about an 6 second interval.
ꢃ
ꢃ
Do not try recording copyright protected MP3 files.
Certain "securized" files are encrypted and code
protected to prevent illegal copying.
These files are of the following types: Windows
MediaTM (registered trade mark of Microsoft Inc)
and SDMITM (registered trade mark of The SDMI
Foundation). You cannot copy such files.
•
•
:
:
The pictures change automatically with about
an 12 second interval.
The pictures change automatically with about
an 18 second interval.
Important :
* Depending on the file size, each interval between
images may take longer or shorter than the manual
suggests.
The above recommendations cannot be taken as a
guarantee that the DVD player will play MP3
recordings, or as an assurance of sound quality.
You should note that certain technologies and
methods for MP3 file recording on CD-Rs prevent
optimal playback of these files on your DVD player
(degraded sound quality and in some cases,
inability of the player to read the files).
ꢃ
This unit can play a maximum of 500 files and 300
folders per disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-39
Picture CD Playback
CD-R JPEG Discs
• Only files with the ".jpg" and ".JPG" extensions can be
played.
• If the disc is not closed, it will take longer to start
playing and not all of the recorded files may be
played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet
format can be played.
Album
Photo : 1 /215
• The name of the JPEG file may not be longer than 8
characters and should contain no blank spaces or
special characters (. / = +).
• Only a consecutively written multisession disc can be
played. If there is a blank segment in the multisession
disc, the disc can be played only up to the blank
segment.
• A maximum of 500 images can be stored on a single
CD.
Photo : 1 /215
• Only Kodak Picture CDs can be played.
• When playing a Kodak Picture CD, only the JPEG
files in the pictures folder can be played.
• Picture discs other than Kodak Picture CD may take
longer to start playing or may not play at all.
• If a number of files in 1 Disc is over 500, only 500
JPEG file can be played.
Timer :
• If a number of folders in 1 Disc is over 300, only
JPEG files in 300 folders can be played.
◆
• When the banner is being appeared, press the
RETURN button to return to the album screen.
• If no buttons on the remote controller pressed for
10 seconds, the menu will disappear.
Press the
controller to display the menu again.
ꢀ
,
❷
or
➛
,
❿
buttons on the remote
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-40
Main Menu
STB Function
After installing your antenna system and SV-DVD54T
with appropriate connectors.
Display Screen
1. Plug in the AC main power and switch on the
receiver.
2. Press the MENU key to bring up the main menu.
Before you can view the television programme, you
must perform the installation.
Therefore you will see only menu images at first.
After the television channels have been
programmed, you will see the following
picture(banner) each time you switch channels:
STB
The number of soundtrack
Logical Channel Number
in current channel
STB
Signal Status
Programme
Information
◆
The following on screen display will appear:
The sub menu topics will be displayed from 1 to 4.
For the sub-menus 1, 2 and 3 you need the PIN
Code.
1. Press the INFO. key in view mode.
2. Select the channel by pressing the Numerical
0~9 keys or
RADIO key to move to TV or Radio channel.
ꢀ
,
❷
keys and select the TV /
Volume Control
◆
You will also see this picture each time you
change channels.
When you press the TV / RADIO key on the
Remote Control Unit, TV and Radio
programme are toggled.
To control the volume level :
1. Press the
2. Press the MUTE key to turn to silence mode.
3. Press the MUTE key again or keys in
➛
,
❿
keys to adjust the volume level.
Detailed programme information
1. Press the INFO. key twice while you are
➛
,
❿
viewing a programme.
order to cancel the mute function.
◆
◆
First you will see the banner described above.
After the INFO. key is pressed in the second
time, detailed information for current
programme can be displyed on another banner,
if there is more information. When this
information is more than one page, ➛➛ ❿❿ can
be used for page up and down.
Select Soundtrack
1. Press the ALT key to see the soundtrack list
2. Press the ❷ꢁand OK key to select one.
ꢀ
,
This service depends on service provider.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-41
Select Videotrack
1. Press the ALT key twice to see the videotrack
5.
➛
,
❿
key: Use to display the programme list
by 30 minutes per block.
list.
2. Press the
ꢀ
,❷ꢁand OK key to select one.
6. Select the channel by pressing
ꢀ
,
❷
key and
press the OK key to watch this channel.
Select Favorites
Subtitle
1. Press the FAV key see the Favorite list.
2. Press the
ꢀ
,❷ꢁand OK key to select one.
When the current broadcasting programme
provides subtitle, press the TEXT key to see the
current subtitle language list. If subtitle is available
on current programme, [ ] is displayed on the
banner after changing programme(channel).
To change the subtitle language:
1. Press the TEXT key to see the subtitle
language List.
2. Use the
ꢀ
,
❷
keys to select a subtitle
language you want.
Programme Information
3. Press the OK key and then the subtitle
language you want is displayed.
◆
The menu display is carefully created and user
friendly to assure the easy operation of the receiver
by the user.
EPG-Electronic Programme Guide
The electronic programme guide gives you a channel
list for the channels.
◆
1. This service depends on service provider.
2. After receiver recognized the TOT-time from
the signal which takes few seconds, it can
display correct EPG information.
1. Press the EPG key while you are viewing a
programme.
This function is displayed on the screen by
using only time.
2. ❿❿ key is for moving to the next coming date.
3. ➛➛ key is for moving back to the previous date.
4. INFO. key : This key is used to watch the
programme information, if there is
more information than one page.
Use the ❿❿ ➛➛ keys to move up
and down pages.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-42
Teletext VBI
When the current broadcasting program provides
Teletext, press the TEXT key two times to see the
current Teletext VBI list. If Teletext VBI is available
on current programme, [ ] is displayed on the
banner after changing programme(channel).
Manual Scanning
To tune-in new channels and weak signals, the SV-
DVD54T has been provided with the option
“Manual Scanning” where the channel data can be
entered by the user. After selecting the “Manual
Scanning” from the Installation Menu, the following
screen will be displayed:
To change the Teletext VBI:
1. Use the
ꢀ
,
❷
keys to select a Teletext VBI
1. Select the channel which you want to find.
2. Input the frequency of the channel you want to
find.
3. Select the bandwidth. You can select the value
of 6, 7or 8 MHz.
4. After selecting option, press the OK key to start
the scanning process.
you want.
2. Press the OK key and then the Teletext VBI
you want is displayed on the screen.
◆
A television with TV functions supported shall be
used.The system shall operate with the subtitle
turned off.
Installation
This menu consists of 3 sub-menus:
Manual Scanning, Auto Scanning and Reset to
Factory Default.
1. Select “Installation” in the main menu mode to
select the sub menu.
2. Enter the PIN Code.
Auto Scanning
The sub menu “Auto Scanning” will enable
download of the channels automatically from the
preprogrammemed load.
◆
If you have not entered your own PIN Code then
the PIN Code 0000 applies, which was set at the
factory.
To download channels automatically:
1. You can select All or Free Only option mode.
All: Scanning all the channels
STB
Free Only: Scanning free channels
2. Setting the maximum or minimum frequency.
3. Press the OK key.
Auto Scanning menu will be displayed.
All the channels in the list will be automatically
downloaded.
STB
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-43
Installation
Delete Frequency
Reset to Factory Defaults
1. Select the desired frequency list you want to
This is to restore the factory set values in case the
user has encountered some problems after
changing any values of channel data and others
which may be in error.
delete by pressing INFO. key.
2. Press the OK key for confirmation.
◆
This feature doesn’t delete frequency itself but
deletes the list of channels registered for frequency.
At the request window,
if you press the OK key, the receiver will be reset to
factory default settings automatically.
◆
This cause your previous settings to be deleted!
STB
Delete Channel
1. Select the desired channel you want to delete by
pressing the INFO. key.
2. Press the OK key for confirmation.
Channel Organising
The “Channel Organising” menu has six functions:
The “Channel Organising” menu is used to delete
the Frequencies and Channels or to make Favorite
channels or move channel as you want.
1. Enter the PIN Code.
If you have not entered your own PIN Code PIN
Code 0000 applies, which was set at the factory.
Delete All Channels
At the request window, press the OK key to delete
all channels and press the RETURN to exit.
STB
STB
STB
Delete Scrambled Channels
At the request window, press the OK key to delete
scrambled channels and press the RETURN to exit.
STB
STB
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-44
Channel Organising
Parental Lock
This “Parental Lock” feature sets viewing
restrictions and prevents unauthorized access to
your SV-DVD54T through the PIN (Personal
Identification Number), which is a 4 digit number.
(The factory presets PIN Code : 0000)
On selecting this menu, you will have two options:
to set lock for any desired channel and to change
your PIN value.
Favorite Channels
You can immediately register the present channel to
the desired Favorite Group.
In addition, you can register a channel to multiple
favorite groups.
1. Select the desired Favorite Group(FAV1~FAV4)
using the FAV key.
2. Select the desired channel list using the
or ❿❿ ➛➛ keys at the TV or RADIO list window.
3. Press the INFO. key and then register the
selected channel at the Favorite Group.
1. Enter PIN Code.
ꢀ
,
❷
If you have not entered your own PIN Code then
the PIN Code 0000 applies, which was set at the
factory.
4. Then press the OK key for confirmation.
STB
You can change TV list or Radio list by the
TV/RADIO key and change favorite list by the FAV
key.
5. When you press the TV/RADIO key, TV list and
Radio list are toggled.
STB
6. Press the FAV key to select another favorite list.
To delete channels from Favorite Group:
7. Select a channel list to delete with
ꢀ
,❷ꢁor ➛➛
❿❿ keys.
8. Press the INFO. key to delete the selected
channel from the favorite channels.
STB
Move Channel
1. Select the TV/RADIO list with
➛
,
❿
keys.
2. Select channel by pressing the INFO. key.
3. Press the key to change the position
ꢀ
,
❷
of the channel you want, and press the OK
key for confirmation.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-45
Parental Lock
System Setup
Set Channel Lock
STB
1. Select the TV or RADIO channel window by
pressing the
2. Select the channel by pressing the
➛➛ ❿❿ keys.
➛
,
❿
or TV/RADIO key.
ꢀ
,
❷
or
,
STB
3. Select the channel lock by pressing INFO. key.
4. Press the OK key for confirmation.
This will lock the channel. Whenever you need to
view the channel, you will have to enter the PIN at
the request window.
After entering PIN Code to able to access a
parental locked channel, it will work on all parental
locked channels.
It means that you can access all parental locked
channels with entering PIN Code on any parental
locked channel successfully.
STB
To cancel the lock :
1. Press the INFO. key again in order to cancel the
lock.
Time Setting
Time Setting is automatically done according to
Time Offset Table (TOT) of broadcasting signal. If it
is set different from the current time, you can adjust
it by changing Time Zone.
Change PIN Code
1. To change the PIN Code, select the second
option “Change PIN Code”.
This will take you to the following menu:
In this option, you need to enter the current PIN
Code at the first cursor, and at the second cursor
enter the desired PIN Code.
◆
It may be different from the time shown on the
VCR.
To confirm, you need to enter the new PIN Code
again.
Please remember the PIN Code should be a 4 digit
numerical value.
THE FACTORY PRESET PIN CODE : 0 0 0 0.
System Information
If you have to contact your service provider or a
service center they might ask for information
available from this menu.
Place the cursor on this sub menu and press the
OK key.
◆
If you forget the PIN Code, contact your dealer or
service provider.
Once you change password, please do not forget
and keep well.
The following will be the on-screen display.
Change PIN Code
Enter the old PIN code
- - - -
- - - -
- - - -
Enter the new PIN code
Confirm the new PIN code
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-46
Technical Specifications (VCR / DVD)
Rated voltage
Power consumption
Weight
AC 110 - 240V~, 50/60Hz
30Watts
4.5Kg
General
Size
430mm X 330mm X 94mm
+5°C ~ +35°C
Operating ambient temperature
Installation conditions
Operation position : Horizontal,
Relative humidity : Below 75%
RCA jack : 1.0Vp-p (unbalanced) 75Ω
RCA jack : -8dBm, 47Kohm unbalanced
UHF 28-69 (Initial CH38)
RCA jack
Video input (Rear)
Audio input (Rear)
RF out
Input
Audio (DVD, VCR)
Audio (DVD only)
Video (DVD, VCR)
Video (DVD only)
Output
Digital audio out RCA jack
RCA jack
S-Video out
COMPONENT out
Tape format
VHS type video tape
PAL, MESECAM, NTSC4.43, NTSC playback on PAL TV
B/B
Colour system
Tuning system
Video S/N
VCR
Above 43dB (standard recording)
Above 240 lines (standard recording)
Above 68dB (Hi-Fi), 39dB (Mono)
20Hz - 20KHz (Hi-Fi)
DVD, CD (12cm), CD (8cm),
95dB
Resolution
Audio S/N
Audio frequency characteristics
Disc
DVD
Audio S/N
Audio dynamic range
105dB
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-47
Technical Specifications (STB)
Type
COFDM DEMODULATION (DVB-T)
2K OR 8K
Demodulator
RF Input
FFT
Code Rate
2/3, 7/8
Guard Intervals
Input Connector
Frequency range
Input Signal Level
System decoding
Profile and level
1/32
IEC, Female
174~230MHz, 470~862MHz
-78 ~ -20 dBm
MPEG 2 ISO/IEC 13818.(transport stream)
MPEG 2 MP@ML (4:2:2)
1~ 15 Mb/s
Video decoder Data rate
Video formats
4:3 (normal) & 16:9 (widescreen)
720(H) x 576(V) x 50 fields/sec
MPEG 1 ISO/IEC 11172~3 layer I & II
single channel, dual channel, stereo, joint stereo
32, 44.1, 48 KHz
Picture resolution
System decoding
Audio Decoder Audio mode
Sampling frequency
◆
The specification of the STB may be changed without notice in advance.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-48
Troubleshooting Guide (VCR)
Before contacting the Samsung after-sales service, perform the following simple checks.
Problem
Explanation/Solution
No power
◆ Check that the power plug is connected to a wall outlet.
◆ Have you pressed the STANDBY/ON button?
You cannot insert a video cassette
◆ A video cassette can only be inserted with the window
side up and the safety tab facing you.
The television programmeme was not recorded ◆ Check the STB-DVD-VCR aerial connections.
◆ Is the STB-DVD-VCR tuner properly set?
◆ Check if the safety tab is intact on the cassette.
Timer recording was unsuccessful
◆ Was the STANDBY/ON button pressed to activate the timer?
◆ Re-check the recording start/stop time settings.
◆ If there was a power failure or interruption during timer
recording, the recording will have been cancelled.
No playback picture or the picture
is distorted
◆ Check to see if you are using a prerecorded tape.
You cannot see normal broadcasts
◆ Check the TUNER/EXTERNAL setting. It should be on TUNER.
◆ Check the TV/VCR aerial connections.
Noise bars or streaks on playback
◆ Press the TRK (
ꢀ
or
❷) buttons to minimize this effect.
When the ❿ button is pressed
during playback, the still picture
◆ A still picture may have “noise bars”, depending on the
II
condition of the tape. Press the TRK ( or ) buttons
ꢀ
❷
has severe “noise bars” streaks
during SLOW motion to minimize this effect.
Video Head Cleaning
◆ If poor pictures appear on a variety of cassettes, the video
heads may need cleaning. This is not a common problem
and unless it appears, the heads should not be cleaned.
When cleaning the video heads, read all instructions
provided with the head cleaning cassette. Incorrect head
cleaning can permanently damage the video heads.
If when tuning in your TV to the STB-DVD-VCR 1. Remove the aerial input plug from the socket marked (aerial
TV does not find the Screen or the pattern
when found suffers from interference, it may
be due to the STB-DVD-VCR output channel
clashing with the normal TV transmissions in
your area. To prevent this you will need to
change the STB-DVD-VCR output channel in
the following way
symbol) on the rear of the STB-DVD-VCR.
2. Carry out the instructions “Tuning Your Television for the
STB-DVD-VCR” (see page 9).
3. Carry out the instructions “Setting the STB-DVD-VCR output
Channel” (see page 14), move the channel number
several channels down from the original setting.
(example: from 35 to 38).
4. Replace the aerial plug into the socket marked (aerial
symbol) on the rear of the STB-DVD-VCR.
5. Re-tune your TV to the STB-DVD-VCR again by following
instructions “Tuning Your Television for the STB-DVD-VCR”
(page 9).
6. If the problem still exists repeat steps 1 to 5 moving several
more channels away from the original setting.
If you are unable to solve the problem after reading the above instructions, note:
◆
◆
◆
The model and serial number on the rear of your STB-DVD-VCR
The warranty information
A clear description of the problem
Then contact your nearest SAMSUNG after-sales service.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-49
Troubleshooting Guide (DVD)
Before requesting service (troubleshooting)
Problem
Action
Page
◆
◆
◆
Ensure that the disc is installed with the label side facing up.
Check the region number of the DVD.
This player cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD,
a CD.
Disc does not play.
P5
◆
5.1 channel sound is reproduced only when the following conditions
are met. :
P28
P30
1) The STB-DVD-VCR player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
Check whether the disc being played has the “Dolby 5.1 ch” mark
on the outside.
5.1 channel sound is not
being reproduced.
◆
◆
◆
Check if your audio system is connected and working properly.
The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is
out of range.
P28-40
P28-32
The
icon appears on
screen.
◆
◆
◆
Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
Playback mode differs from
the Setup Menu selection.
The screen ratio cannot be
changed.
The Screen Ratio is fixed on your DVDs.
P31
P30
Make sure you have selected the correct Digital Output in the Audio
Options Menu.
No audio.
◆
Press STANDBY/ON on from a cold start with no disc in the unit.
Press the ➛➛ and ❿❿ buttons simultaneously on the front panel for
five seconds. Switch off and on the STB-DVD-VCR by pressing
STANDBY/ON button. The Parental Mode is now unlocked as
indicated on the display. You can now set your rating level and
change your password to a new number.
P32
Forgot password
◆
◆
Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
If the problem still cannot be solved, please contact your nearest
authorized service center.
If you experience other
problems.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-50
Troubleshooting Guide (STB)
In some region, the digital terrestrial signal may be weak.So you’d better use the antenna in which the booster
was built, for watching the weak sinal channels.
You can download and upgrade the system software of the receiver through a specific channel through a specific
channel designated by the broadcaster.The Distributor will provide you with more information about that.
Problem
Possible cause
Solution of the problem
No pictures on the screen
Receiver in Standby mode;
Scart not connected tightly
to video output of television;
incorrect channel or video
output selected on television
Set receiver to “On”;
Check connection and correct;
Check channel and video output and
correct (TV instruction manual)
No sound
Audio cord connected
incorrectly;
Check connection and correct;
Loudness level = 0;
Muting active
Increase loudness on television set;
Press the MUTE key
Remote Control does not
operate directly
incorrect operation;
Point remote control
towards the Receiver.
Batteries dead or inserted
incorrectly
Replace batteries or insert correctly
Poor picture quality
Signal strength too low
Check the signal strength in
the “Auto Scanning” menu, correct
alignmenta of your antenna
On-Screen Error Message
“Searching for signal”
Antenna cable not connected
or not tight;
Check connection and correct;
incorrect position of the
antenna;
Check position and correct,
Check the signal strength in
the “Auto Scanning” menu
On-Screen Error Message
“Channel data
Rereiver not yet set
Scanning of in “Automatic scanning”
or “Manual scanning” menu
does not exist.”
Disposal
The device, packaging material (e.g. Styrofoam) and the batteries must never
be disposed of with household refuse.
Please obtain appropriate information about the regulations in your community,
and dispose of all refuse in accordance with regulations at the separate locations provided.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-51
THIS APPLIANCE IS DISTRIBUTED BY
ELECTRONICS
AK68-00467C
Download from Www.Somanuals.com. All Manuals Search And Download.
|