Samsung DVD Player DVD V940K User Guide

Instruction Manual  
DVD-V940K  
STANDBY/ON  
OP  
E
N
/C  
L
OS  
E
OK  
PAL/NTSC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Selecting the Audio Output Mode . . . . . . . . . 20  
Playing a Cassette in Slow Motion . . . . . . . . . 21  
Playing a Sequence Frame by Frame . . . . . . 21  
Playing a Sequence at Variable Speeds . . . . 21  
Searching for a Specific Sequence . . . . . . . . 22  
Using the Tape Counter . . . . . . . . . . . . . . . . . 23  
Using the Assemble Edit Function . . . . . . . . . 23  
Recording from Another VCR or Camcorder . 24  
Foreword  
Safety Instructions . . . . . . . . . . . . . . . . . . . . .  
Disc Type and Characteristics . . . . . . . . . . . .  
3
4
DVD-VCR Overviews  
Front View of the DVD-VCR . . . . . . . . . . . . .  
Rear View of the DVD-VCR . . . . . . . . . . . . . .  
Accessories . . . . . . . . . . . . . . . . . . . . . . . . .  
Display In dicators . . . . . . . . . . . . . . . . . . . . .  
5
5
5
6
KARAOKE Functions (VCR)  
Connecting Your DVD-VCR  
Inserting Batteries in the Remote Control . . . .  
Connecting DVD-VCR to the TV  
using the Coaxial Cable . . . . . . . . . . . . . . . .  
Connecting DVD-VCR to the TV  
using the AV Cable . . . . . . . . . . . . . . . . . . . .  
Connecting DVD-VCR to a Satellite  
Receiver or Other Equipment . . . . . . . . . . . .  
Plug & Auto Set up . . . . . . . . . . . . . . . . . . . .  
Tuning Your Television for the DVD-VCR . . . .  
Deck Control Keys . . . . . . . . . . . . . . . . . . . .  
Basic TV Tuner Operations . . . . . . . . . . . . . .  
Using the KARAOKE Function . . . . . . . . . . . . 24  
SCORE Function . . . . . . . . . . . . . . . . . . . . . . 24  
KARAOKE SEARCH Function . . . . . . . . . . . . 24  
6
6
7
DVD Functions  
Choosing a Connection . . . . . . . . . . . . . . . . . 25  
Setting Up the Language Features . . . . . . . . 25  
Setting Up the Audio Options . . . . . . . . . . . . . 27  
Setting Up the Display Options . . . . . . . . . . . 28  
Setting Up the Parental Control . . . . . . . . . . . 29  
Special Playback Features . . . . . . . . . . . . . . 30  
A/V Receiver Connections . . . . . . . . . . . . . . . 30  
Component Connections (for DVD) . . . . . . . . 31  
Adjusting the Aspect Ratio (EZ View) . . . . . . 32  
Using the Display Function . . . . . . . . . . . . . . 33  
Changing the Camera Angle . . . . . . . . . . . . . 34  
Selecting the Subtitle Language . . . . . . . . . . 34  
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Selecting the Audio Language . . . . . . . . . . . . 35  
Using the Mark Function . . . . . . . . . . . . . . . . 36  
MP3/WMA Play . . . . . . . . . . . . . . . . . . . . . . . 36  
Program Play & Random Play . . . . . . . . . . . . 38  
Picture CD Playback . . . . . . . . . . . . . . . . . . . 38  
DivX/XviD/MPEG4 Special Playback  
7
8
8
9
9
Copying from DVD to VCR . . . . . . . . . . . . . . 10  
Setting the Date and Time . . . . . . . . . . . . . . . 10  
Setting Up Your DVD-VCR  
Presetting the Stations Automatically . . . . . . . 11  
Presetting the Stations Manually . . . . . . . . . . 12  
Clearing a Preset Station . . . . . . . . . . . . . . . . 13  
Changing the Preset Station Table . . . . . . . . . 13  
Selecting the RF OUT Sound Mode (G-K) . . . 14  
Setting the DVD-VCR Output Channel . . . . . . 14  
Selecting the Colour Mode . . . . . . . . . . . . . . 15  
NICAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Intelligent Picture Control . . . . . . . . . . . . . . . 16  
Auto Power off . . . . . . . . . . . . . . . . . . . . . . . 16  
Screen Messages . . . . . . . . . . . . . . . . . . . . . 16  
Selecting the Cassette Type . . . . . . . . . . . . . 17  
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
DivX/XviD/MPEG4 Playback . . . . . . . . . . . . . 41  
KARAOKE Functions (DVD)  
Beginning Karaoke Functions . . . . . . . . . . . . 42  
Key Control . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Reserving a Song . . . . . . . . . . . . . . . . . . . . . 42  
Cancellation of reservation . . . . . . . . . . . . . . 43  
Vocal Fader . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Guide Melody . . . . . . . . . . . . . . . . . . . . . . . . 43  
Score Function . . . . . . . . . . . . . . . . . . . . . . . 43  
Types of Karaoke disc . . . . . . . . . . . . . . . . . . 43  
Recording Television Broadcasts  
Selecting the Recording Speed . . . . . . . . . . . 17  
S-VHS Play . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Recording a Programme Immediately . . . . . . 18  
Protecting a Recorded Cassette . . . . . . . . . . 18  
Recording a Programme with Automatic Stop 18  
Using the Timer Programming Feature . . . . . 19  
Checking a Preset Recording . . . . . . . . . . . . 19  
Cancelling a Preset Recording . . . . . . . . . . . 20  
Solving Problems  
Technical Specifications . . . . . . . . . . . . . . . . 44  
Problems and Solutions (VCR) . . . . . . . . . . . 45  
Troubleshooting Guide (DVD) . . . . . . . . . . . . 46  
Playing Back  
Playing a Cassette . . . . . . . . . . . . . . . . . . . . 20  
Adjusting Picture Alignment Manually . . . . . . 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-2  
Safety Instructions  
The following illustrations represent precautions.  
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.  
DO NOT OPEN THE DVD-VCR. Refer to service personnel.  
10%  
75%  
40°C  
H
H
5°C  
Do NOT expose the DVD-VCR to  
direct sunlight.  
Do NOT expose the DVD-VCR to  
any liquids.  
Do NOT expose the DVD-VCR to  
extreme temperature conditions  
(below 5°C and above 40°C) or to  
extreme humidity conditions (less  
than 10% and more than 75%).  
Do NOT place any objects on the  
DVD-VCR or remote control.  
During a storm and/or lightning,  
unplug the DVD-VCR from the  
mains socket and aerial.  
If the remote control is not used for  
a long period of time, remove the  
batteries and store it in a cool, dry  
place.  
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL  
ENVIRONMENTS  
This product incorporates copyright protection technology that is protected by method claims of certain  
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights  
owners.  
Use of this copyright protection technology must by authorized by Macrovision Corporized by Macrovision  
Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by  
Macrovision Corporation. Reverse engineering or disassembly is prohibited.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-3  
Disc Type and Characteristics  
This DVD player is capable of playing the following types of discs with the corresponding logos :  
Disc Types (Logos) Recording Types Disc Size  
DVD  
Max. Playing Time  
Characteristics  
Single-sided 240 min.  
Double-sided 480 min.  
DVD contains excellent sound and video  
due to Dolby Digital and MPEG-2 system.  
12 Cm  
Audio  
+
Various screen and audio functions can  
be easily selected through the on-screen  
menu.  
Single-sided 80 min.  
Double-sided 160 min.  
Video  
8 Cm  
Video with CD sound, VHS quality &  
MPEG-1 compression technology.  
VIDEO-CD  
AUDIO-CD  
12 Cm  
8 Cm  
74 min.  
20 min.  
Audio  
+
Video  
An LP is recorded as an analog signal  
with more distortion. CD is recorded as a  
Digital Signal with better audio quality,  
less distortion and less deterioration of  
audio quality over time.  
12 Cm  
8 Cm  
74 min.  
20 min.  
Audio  
* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!  
(CDGs play audio only, not graphics.)  
* It may not be to play CD-R,CD-RW and DVD-R in all cases due to the type of disc or condition of the recording.  
Disc Markings  
Play Region Number  
Both the DVD player and the discs are coded by  
region. These regional codes must match in order for  
the disc to play. If the codes do not match, the disc  
will not play.  
The Region Number for this player is described  
on the rear panel of the player.  
~
Play Region Number  
PAL colour system in Australia, Newzealand, etc.  
PAL  
NTSC  
NTSC broadcast system in U.S.A, Canada,  
Korea, Japan, etc.  
Progressive Scan Outputs (525p/625p)  
Dolby Digital disc  
Consumers should note that not all high definition  
television sets are fully compatible with this product  
and may cause artifacts to be displayed in the picture,  
in case of 525 or 625 progressive scan picture prob-  
lems, it is recommended that the user switch the con-  
nection to the STANDARD DEFINITIONoutput. If  
there are questions regarding our TV set compatibility  
with this model 525p and 625p DVD player, please  
contact our customer servise center.”  
Stereo disc  
STEREO  
DIGITAL  
SOUND  
Digital Audio disc  
DTS disc  
Disc contains a Divx software product  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-4  
Front View of the DVD-VCR  
1
2
3
4
5
6
7
8
9
10 11 12  
13  
14  
15  
16  
1
2
3
4
5
6
DVD DECK  
OPEN / CLOSE BUTTON  
VIDEO CASSETE COMPARTMENT  
EJECT BUTTON  
STANDBY/ON BUTTON  
REW / SKIP BACK BUTTON  
7
8
9
STOP BUTTON  
PLAY / STILL BUTTON  
F.F / SKIP NEXT BUTTON  
13 PROGRESSIVE BUTTON  
14 PROGRAME SELECTION BUTTON  
15 ECHO BUTTON  
10 RECORD BUTTON  
11 COPY BUTTON  
12 DVD / VCR SELECT BUTTON  
16 MIC JACK  
Rear View of the DVD-VCR  
1
2
3
4
5
6
7
8
9
1
2
3
4
RF ANTENNA INPUT  
RF OUT TO TV  
5
6
AUDIO LINE OUT TO TV  
7
8
COMPONENT VIDEO OUT  
DIGITAL AUDIO OUT SOCKET  
(OPTICAL)  
(S-VIDEO OR COMPONENT)  
DIGITAL AUDIO OUT SOCKET  
(COAXIAL)  
LINE IN 1  
LINE OUT TO TV (COMPOSITE)  
9
S-VIDEO OUT JACK  
Accessories  
You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR).  
Together with your DVD-VCR, you will find the following accessories in the box.  
REMOTE CONTROL  
& BATTERIES  
AUDIO & VIDEO  
CABLE  
OWNERS  
INSTRUCTIONS  
COAXIAL CABLE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-5  
Connecting DVD-VCR to the  
TV using the Coaxial Cable  
Display Indicators  
1
2
3
4
5
To receive television programmes a signal must be  
received from one of the following sources:  
An outdoor aerial  
An indoor aerial  
A cable television network  
A satellite receiver  
6
Make sure that both the television and the DVD-  
VCR are switched off before connecting the  
cables.  
1
2
3
The DVD Deck is active  
A DVD, CD, VCD, or SVCD is loaded  
The time, counter position, time remaining or  
current deck status is displayed  
VHS tape is inserted  
1
2
3
4
Remove the aerial or network input cable from the  
television.  
4
5
6
Connect this cable to the 75coaxial socket  
The VCR Deck is active  
A Timer Recording is programmed or in progress.  
marked  
on the rear of your DVD-VCR.  
TV  
Plug the coaxial cable supplied into the  
on your DVD-VCR.  
socket  
Plug the other end of the coaxial cable into the  
connector previously used for the aerial on the  
television.  
Inserting Batteries in the  
Remote Control  
5
To obtain better quality pictures and sound on your  
television, you can also connect your DVD-VCR to  
the television via the AV cable (see next page) if  
your television is equipped with this type of  
connection.  
You must insert or replace the batteries in the remote  
control when you:  
Purchase the DVD-VCR  
Find that the remote control is no longer  
working correctly  
1
2
Push the tab in the direction of the arrow to release  
the battery compartment cover on the rear of the  
remote control.  
2
Insert two AAA, RO3 or equivalent batteries, taking  
care to respect the polarities:  
+ on the battery with + on the remote control  
on the battery with on the remote control  
3
Replace the cover by aligning it with the base of  
the remote control and pushing it back into place.  
TV  
1
3
4
Do not mix different battery types (manganese  
and alkaline for example).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-6  
Connecting DVD-VCR to a  
Satellite Receiver or Other  
Equipment  
Connecting DVD-VCR to the  
TV using the AV Cable  
You can connect your DVD-VCR to the television using  
the AV cable if the appropriate input is available on the  
television. You thus:  
You can connect other audio and/or video equipment  
to your DVD-VCR in different ways. The following  
illustrations give a few examples of the connection  
possibilities.  
Obtain better quality sound and pictures  
Simplify the setting up procedure of your  
DVD-VCR  
The AV input/output connectors on the rear of  
the DVD-VCR are used for equipment, such as  
camcorders, VCRs or sound systems.  
Regardless of the type of connection chosen, you  
must always connect the coaxial cable supplied.  
Otherwise, no picture will be visible on the  
screen when the DVD-VCR is switched off.  
Make sure that both the television and the  
DVD-VCR are switched off before connecting the  
cables.  
Camcorder  
VCR  
1
2
Connect the coaxial cable as indicated on page 6.  
Connect one end of the AV cable to the Video  
output and Audio L, R output socket on the rear of  
the DVD-VCR.  
REAR OF THE  
DVD-VCR  
3
4
Plug the other end into the appropriate connector  
on the television.  
Sound system  
To view DVD-VCR, you must select AV mode on  
your TV.  
Aerial  
TV  
3
2
RF coaxial cable  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-7  
Tuning Your Television for the  
DVD-VCR  
Plug & Auto Set up  
You must tune your television for the DVD-VCR only if  
you are not using a AV cable  
Your DVD-VCR will automatically set itself up when it  
is plugged into the mains for the first time. TV stations  
will be stored in memory. The process takes a few  
minutes. Your DVD-VCR will then be ready for use.  
To view pictures from your DVD-VCR when a AV  
cable is used, the television must be set to the  
audio/video mode (AV).  
1
Connect the coaxial cable as indicated on page 6.  
(Connecting Your DVD-VCR to the TV Using the  
Coaxial Cable)  
1
2
Switch on the television.  
2
3
4
5
Plug the DVD-VCR into the mains.  
Result: The Auto Setup is started automatically.  
Switch on the DVD-VCR by pressing STANDBY/ON  
on the front of the DVD-VCR or STANDBY/ON on  
the remote control.  
Select the required language by pressing the  
buttons.  
or  
3
4
Select a programme position on the television to be  
reserved for use with your DVD-VCR.  
Press OK to store the language selected.  
Result: A message appears.  
Insert the video cassette in the DVD-VCR. Check  
that the DVD-VCR starts reading the cassette; if  
Press OK to start the auto scanning.  
not, press  
button.  
II  
The number of stations automatically stored by  
the VCR depends on the number of stations  
that it has found.  
5
6
7
Start a scan on your television or set the television  
to UHF channel 36.  
6
The current time and date are displayed  
automatically. Check the date and time. if it is :  
Fine tune the television until the pictures and sound  
are obtained clearly.  
Correct, Press RETURN button twice to exit the  
menu.  
If you cannot find the pictures and sound, or there  
is interference from nearby channels, it may be  
necessary to change the setting of the DVD-VCR  
output channel (see Setting the DVD-VCR Output  
Channel on page 14 and Problems and Solutions  
on page 45).  
incorrect, see page 10.  
Auto preset can be performed by pressing  
the front panel continuously for 5 seconds or  
more with no tape inserted in VCR mode.  
on  
8
When the picture and sound are perfectly clear,  
store this channel at the desired programme  
position on the television.  
Result: That programme is now reserved for use  
with your DVD-VCR.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-8  
Deck Control Keys  
Basic TV Tuner Operations  
The DVD-VCR uses one set of controls to operate both  
decks. The following keys are helpful in successfully  
controlling each deck.  
The following buttons are used when watching  
television via the DVD-VCR’s built-in TV tuner.  
1
2
3
PROG  
Button  
1
2
STANDBY/ON Button  
Press the STANDBY/ON button on the remote  
control or front panel to turn on the DVD-VCR.  
Press to change to the next or previous channel.  
0-9 Buttons  
Press to select channels directly.  
DVD Button  
Press the DVD button on the remote control when  
you want to control the DVD deck.  
INFO.  
Press to display the channel you are watching.  
Also works in DVD and VCR mode.  
The DVD indicator will light on the Front  
Panel Display to show that the DVD deck is  
selected.  
3
VCR Button  
Press the VCR button on remote control when you  
want to control the VCR deck.  
The VCR indicator will light on the Front Panel  
Display to show that VHS deck is selected.  
4
INPUT SEL. Button  
Press the INPUT SEL. button repeatedly to cycle  
through all of your input sources, including the  
Tuner (PR##), Line 1 (rear AV input).  
Before using the VCR operation of 10~24 pages,  
press the VCR button on the remote control to  
select VCR mode.  
Before using the DVD operation of 25~43 pages,  
press the DVD button on the remote control to  
select and watch DVD.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-9  
Copying from DVD to VCR  
Setting the Date and Time  
Your DVD-VCR contains a 24-hour clock and calendar  
used to:  
The DVD-VCR allows you to copy the contents of a  
DVD to a VHS tape with a press of the COPY button.  
If the DVD you are attempting to copy is copy  
protected, you will not be able to copy the  
disc. It is not permitted to copy Macrovision®  
encoded DVDs.  
Automatically stop programme recording  
Preset your DVD-VCR to record a programme  
automatically  
You must set the date and time when:  
You purchase the DVD-VCR  
1
Insert Disc  
Do not forget to reset the time when you  
change clocks from winter to summer time  
and vice versa.  
Insert the disc you wish to copy in the DVD deck  
and close the drawer.  
2
3
Insert VHS Tape  
Insert a blank VHS videotape into the VCR deck.  
1
After pressing the MENU, press the OK or  
Result: The Setup menu is displayed.  
.  
Copy the DVD to VHS Tape  
Press the COPY button on the DVD-VCR front  
panel.  
The DVD will go into Play mode and the VCR  
will go into Record mode.  
If the DVD disc menu appears, you may need  
to press the PLAY button manually to begin  
copying.  
4
Stop the Copy Process  
When the DVD is finished playing, press the VCR  
button on the remote control and then press the  
STOP button to end the copy.  
2
3
Press the corresponding  
the Clock option.  
,
buttons to select  
You must stop the Copy process manually  
when the DVD movie ends or the DVD may  
replay and record over and over again.  
Press the OK or  
to select this option.  
Result: The Clock Set menu is displayed.  
Clock Set  
Time  
Date  
Year  
12 : 00  
1 / JAN / 2004 THU  
1
2
3
4
5
Press  
month and year.  
Result: The option selected highlight.  
or  
to select the hour, minutes, day,  
Press the  
the value.  
or  
buttons to increase or decrease  
Result: The day of the week is displayed  
automatically.  
You can hold the  
more quickly through the values.  
,❷  
buttons down to scroll  
6
On completion, press RETURN to exit the menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-10  
Presetting the Stations Automatically  
You do not need to preset the stations if you  
Auto Setup  
◆  
have already set them automatically (see Plug &  
Auto Set Up on page 8).  
Your data will be lost  
Your DVD-VCR contains a built-in tuner used to receive  
television broadcasts.  
Press OK to continue  
Menu to exit  
You must preset the stations received through the tuner.  
This can be done:  
Plug & Auto Set up (see page 8)  
Automatically  
Manually (see page 12)  
Auto Setup  
15%  
Please Wait  
You can store up to 80 stations.  
1
After pressing the MENU, press the OK or  
Result: The Setup menu is displayed.  
.  
Result:  
The Please Wait indication highlight on  
the television screen.  
The first frequency band is scanned and  
the first station found is stored.  
The DVD-VCR then searches for the  
second station and so on.  
When the automatic scanning procedure  
has finished, the DVD-VCR switches  
automatically to programme 1.  
2
3
Press the corresponding  
the Install option.  
,
buttons to select  
The number of stations automatically stored by  
the DVD-VCR depends on the number of  
stations that it has found.  
Press the OK or  
to select this option.  
Result: The Install menu is displayed.  
6
If you wish to cancel the auto scanning before the  
end, press the MENU button to exit the menu.  
Install  
Auto Setup  
Manual Setup  
TV System  
VCR Output CH  
: G  
: CH 36  
Once the auto scanning procedure has finished,  
some stations may have been stored more than  
once; select the stations with the best reception  
and delete the ones no longer required.  
(See page 13)  
4
5
Press the corresponding  
Auto Setup is selected.  
And then press the OK or  
Result: A message appears, indicating that any  
channels already preset on your DVD-VCR  
will be deleted.  
,
buttons, until the  
to select this option.  
Press OK to start the auto scanning.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-11  
Presetting the Stations Manually  
9
Press the  
,
buttons until the NAME is selected.  
You do not need to preset the stations manually if  
◆  
The station name is set automatically from the  
broadcast signal.  
you have already set them automatically.  
1
After pressing the MENU, press the OK or  
Result: The Setup menu is displayed.  
.  
10 To change the programmes name, press the  
button.  
Result: The first letter of the name flashes.  
2
Press the corresponding  
,buttons to select the  
Install option.  
11 To...  
Then...  
3
Press the OK or  
Result: The Install menu is displayed.  
to select this option.  
Select a character Press the  
,
button until the  
in the name  
required character is displayed  
(letters, numbers or -character).  
Install  
Move to the next or Press the  
previous character respectively.  
or  
buttons  
Auto Setup  
Manual Setup  
TV System  
: G  
VCR Output CH  
: CH 36  
12 If you...  
Then...  
Wish to store the  
station displayed  
Press the  
until the MFT is selected.  
Press the buttons to  
,
buttons  
,
4
5
Press the corresponding  
Manual Setup option is selected.  
,
buttons, until the  
adjust the picture, if necessary.  
Press OK to store the station  
Press the OK or to select a Manual Setup option.  
Do not wish to  
store the station  
displayed  
Press the  
until the CH is selected.  
Press the buttons to  
,❷ꢁbuttons  
Result: The TV STATION TABLE menu is displayed.  
,
go on scanning the  
frequency band and display  
the next station  
TV STATION TABLE  
PR  
1
CH  
NAME  
2
Go back to the beginning of  
Step 14  
3
4
5
SWAPPING : OK  
RETURN  
DELETE  
:
CLEAR  
13 Repeat this procedure from Step 6 onwards, until  
all the required stations have been stored.  
14 On completion, press the RETURN button three  
6
7
Press the  
number as required.  
,
buttons to select a programme  
times to exit the menu.  
Press the button to preset the station.  
Result: The MANUAL TUNING menu is displayed.  
MANUAL TUNING  
PR  
:
:
:
:
1
CH  
- -  
MFT  
NAME  
-
- - - -  
MEMORY  
:
OK  
RETURN  
8
Press the  
channels.  
or  
buttons to start scanning the  
Result: The frequency band is scanned and the  
first station found is displayed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-12  
Changing the Preset  
Station Table  
Clearing a Preset Station  
You can rearrange the Station Table and give different  
programme numbers to the stations listed according to  
your own preferences.  
If you have stored a TV station:  
◆◆  
That you do not require  
At the wrong programme position  
1
2
After pressing the MENU, press the OK or  
Result: The Setup menu is displayed.  
.  
you can cancel it.  
1
2
After pressing the MENU, press the OK or  
Result: The Setup menu is displayed.  
.  
Press the corresponding  
,❷  
buttons to select  
the Install option.  
Press the corresponding  
the Install option.  
,❷  
buttons to select  
3
Press the OK or  
Result: The Install menu is displayed.  
buttons to select this option.  
3
Press the OK or  
Result: The Install menu is displayed.  
to select this option.  
Install  
Auto Setup  
Manual Setup  
Install  
TV System  
VCR Output CH  
: G  
: CH 36  
Auto Setup  
Manual Setup  
TV System  
: G  
VCR Output CH  
: CH 36  
4
5
Press the corresponding  
Manual Setup option is selected.  
,
buttons, until the  
4
5
Press the corresponding  
Manual Setup option is selected.  
,
buttons, until the  
Press the OK or button to select this option.  
Result: The TV STATION TABLE menu is  
Press the OK or to select a Manual Setup option.  
displayed.  
Result: The TV STATION TABLE menu is  
displayed.  
TV STATION TABLE  
PR  
1
CH  
21  
NAME  
TV STATION TABLE  
- - - -  
2
PR  
1
CH  
21  
NAME  
3
4
2
5
3
4
SWAPPING : OK  
RETURN  
5
DELETE  
:
CLEAR  
SWAPPING : OK  
RETURN  
DELETE  
:
CLEAR  
TV STATION TABLE  
PR  
1
CH  
NAME  
6
Press the corresponding  
required preset TV station (PR) is selected.  
,
buttons, until the  
2
3
21  
- - - -  
7
8
Press the CLEAR button.  
4
5
Repeat the same procedure from Step 6 onwards  
until all the required stations have been cleared.  
SWAPPING : OK  
RETURN  
DELETE  
:
CLEAR  
9
On completion, press the RETURN button four  
times to exit the menu.  
6
Press the corresponding  
,
buttons, until the  
required preset TV programme is selected.  
Result: The selected station is displayed at the  
same time on the television screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-13  
Changing the Preset  
Station Table  
Setting the DVD-VCR Output  
Channel  
Your DVD-VCR output channel may need to be  
changed if the pictures suffer from interference or if  
your TV cannot find the pictures.  
Also, you can change the DVD-VCR output channel to  
adjust the frequency in which information is displayed  
on the screen.  
7
To change the programme number assigned to a  
station press the OK button on the remote control.  
(For example, To move a TV station in programme  
1 to programme 3)  
8
9
Press the  
,
buttons to select required position.  
And then press OK again to swap the position.  
1
2
After pressing the MENU, press the OK or  
Result: The Setup menu is displayed.  
.  
On completion, press the RETURN button four  
times to exit the menu.  
Press the corresponding  
,
buttons to select  
the Install option.  
3
Press the OK or  
Result: The Install menu is displayed.  
to select this option.  
Selecting the RF OUT Sound  
Mode (G-K)  
Install  
You can choose the sound mode (G or K) according to  
the TV set connected to your VCR.  
Auto Setup  
CH:21  
Manual Setup  
TV System  
VCR Output CH  
:
CH:36  
:
: G  
: CH 36  
1
2
After pressing the MENU, press the OK or  
Result: The Setup menu is displayed.  
.  
CH:69  
Press the corresponding  
,❷  
buttons to select  
the Install option.  
3
4
Press the OK button to select this option.  
Result: The Install menu is displayed.  
4
5
Press the  
option is selected.  
,
buttons, until the VCR Output CH  
Press the OK  
or  
buttons, until the TV  
Select the required output channel (CH21~CH69)  
by pressing the OK or buttons. and buttons.  
System option is selected.  
Install  
CH21 ꢂꢁ .. CH36 ꢂꢁ .. CH69  
Auto Setup  
Manual Setup  
TV System  
VCR Output CH  
G
K
: G  
: CH 36  
6
On completion, press RETURN to exit the menu.  
Then tune your television again (see page 8).  
5
6
Press the OK or  
button to select G or K.  
On completion, press RETURN to exit the menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-14  
Selecting the Colour Mode  
NICAM  
Before recording or playing back a cassette, you can  
select the required system standard.  
NICAM programmes are divided into 3 types. NICAM  
Stereo, NICAM Mono and Bilingual (transmission in  
another language). NICAM programmes are always  
accompanied by a standard mono sound broadcast and  
you can select the desired sound.  
When you playback an NTSC-recorded tape on  
this DVD-VCR make a setting on the colour  
system according to your TV. If your TV is a  
PAL system only TV, set NTPB.  
Please refer to page 20.  
If your TV is Multi System TV (NTSC 4.43  
compatible), set NT4.43 and you can record  
NT4.43.  
1
2
After pressing the MENU, press the OK or  
Result: The Setup menu is displayed.  
.  
Press the corresponding  
the User Set option.  
,
buttons to select  
1
2
After pressing the MENU, press the OK or  
Result: The Setup menu is displayed.  
.  
3
Press the OK or  
to select this option.  
Result: The User Set menu is displayed.  
Press the corresponding  
the User Set option.  
,
buttons to select  
User Set  
3
Press the OK or  
Result: The User Set menu is displayed.  
to select this option.  
Colour System  
NICAM  
:
:
:
Auto  
On  
On  
Off  
IPC  
On  
User Set  
Auto  
Colour System  
NICAM  
:
:
:
Auto  
On  
PAL  
MESECAM  
B/W  
IPC  
On  
4
5
Press the corresponding  
NICAM option is selected.  
,
buttons, until the  
To...  
Press OK or  
, until...  
4
5
Press the corresponding  
Colour System option is selected.  
,
❷ꢁbuttons, until the  
Mono mode  
Off is displayed.  
Off: Only set at this position to  
record the standard mono  
sound during a NICAM  
broadcast if the stereo sound is  
distorted due to inferior  
Press the OK or button to select  
Auto  
B/W  
PAL  
MESECAM B/W.  
Black and White  
reception conditions.  
6
On completion, press RETURN three time to exit  
the menu.  
NICAM mode  
On is displayed.  
On: Normally set at this  
position.  
6
On completion, press RETURN three times to exit  
the menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-15  
Intelligent Picture Control  
The Intelligent Picture Control Feature allows you to  
adjust the sharpness of the image automatically,  
according to your own preferences.  
2
Press the corresponding  
Auto Power Off option is selected.  
,
buttons, until the  
1
2
During playback, press the MENU button on the  
remote control.  
Language  
:
English  
Install  
User Set  
Press the OK or  
.  
Off  
Auto Power Off  
Screen Messages  
:
:
Off  
On  
1Hour  
2Hour  
3Hour  
Result: The Setup menu is displayed.  
3
4
Press the corresponding  
the User Set option.  
,  
buttons to select  
Press the OK or  
buttons to select this option.  
Result: The User Set menu is displayed.  
3
4
Press the OK or  
buttons, until you select the time  
of Auto Power Off interval.  
User Set  
Off 1Hour 2Hour  
3Hour  
Colour System  
NICAM  
:
:
:
Auto  
On  
On  
Off  
IPC  
On  
On completion, press RETURN twice to exit the  
menu.  
Screen Messages  
5
6
Press the corresponding  
IPC option is selected.  
,
buttons, until the  
Your DVD-VCR displays most information both on the  
DVD-VCR and the television.  
You can choose to display or hide this information on  
the television screen (except for the SEARCH,  
Programming MENU and Timer functions, which  
cannot be hidden).  
Press the OK or  
buttons to select the IPC  
(intelligent picture control) option.  
When intelligent picture control mode is ON, the  
sharpness of the image is adjusted  
automatically.  
1
2
After pressing the MENU, press the OK or  
Press the corresponding buttons, until the  
Screen Messages option is selected.  
.  
7
8
To adjust the sharpness manually, press the  
button to turn the IPC mode OFF.  
,  
Press the  
or  
buttons until the picture is  
displayed according to your preferences.  
If you do not press a button within ten seconds,  
Language  
:
English  
the PICTURE menu disappears automatically.  
Install  
User Set  
9
On completion, press the RETURN button.  
Auto Power Off  
Screen Messages  
:
:
Off  
On  
On  
Off  
You also can directly select this function using  
IPC button on the remote control.  
3
4
To...  
Press OK or  
, until...  
Auto Power off  
Display on-screen information On is displayed.  
Hide on-screen information Off is displayed.  
The Auto Power Off feature automatically turns off  
your DVD-VCR if no signal is received and you do not  
press any button for the selected time.  
On completion, press RETURN twice to exit the  
menu.  
1
After pressing the MENU, press the OK or  
Result: The Setup menu is displayed.  
.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-16  
Selecting the Cassette Type  
Selecting the Recording Speed  
If you wish to use the tape counter to display the time  
remaining on a cassette, you must indicate the type of  
cassette inserted.  
You can record a cassette at two different speeds:  
SP (Standard Play)  
LP (Long Play)  
In Long Play modes:  
1
2
After pressing the MENU press the corresponding  
buttons to select the VCR option.  
Each cassette lasts twice as long  
The recording is of a slightly lower  
quality  
,  
Press the OK or buttons to select this option.  
Result: The VCR Setup menu is displayed.  
Press the corresponding buttons, until the  
Tape Select option is selected.  
3
,  
To record a cassette... Press the SPEED button on  
the remote control, until...  
In standard play mode  
In long play mode  
SP is displayed.  
VCR Setup  
E180  
E240  
E260  
E300  
LP is displayed.  
Tape Select  
Repeat Play  
S-VHS  
:
:
:
E180  
Off  
Off  
T
ype  
Recording Time (in SP)  
180 mins. or 3 hours  
E-180  
E-240  
E-260  
E-300  
240 mins. or 4 hours  
260 mins. or 4 hours and 20 mins.  
300 mins. or 5 hours  
4
5
Press the OK or  
required, until the correct cassette length is  
displayed.  
buttons as many times as  
E180  
E240  
E260  
E 300  
S-VHS Play  
Press RETURN twice to exit the menu.  
The DVD-VCR allows you to playback high quality S-  
VHS tapes.  
Repeat Play  
VCR Setup  
You can set repeat play to repeat the tape continuously  
from beginning to end.  
Tape Select  
Repeat Play  
S-VHS  
:
:
:
E180  
Off  
Off  
On  
Off  
VCR Setup  
Tape Select  
Repeat Play  
S-VHS  
:
:
:
E180  
Off  
Off  
On  
Off  
To...  
Press OK or  
, until...  
S-VHS play  
On is displayed.  
Do not wish to S-VHS play  
Off is displayed.  
To...  
Press OK or  
, until...  
Repeat play  
On is displayed.  
Do not wish to repeat play  
Off is displayed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-17  
Recording a Programme  
Immediately  
Recording a Programme with  
Automatic Stop  
Before recording a programme, you must have preset  
the corresponding station (unless you are recording via  
an external video source). If you have not done so,  
refer to pages 11 and 12.  
This function enables you to record up to nine hours  
(LP) of programmes.  
Your DVD-VCR stops automatically after the requested  
length of time.  
1
2
Switch on the television.  
1
2
Switch on the television.  
To monitor the programme being recorded, select  
the television channel reserved for use with your  
DVD-VCR (or the AV input if used).  
To monitor the programme being recorded, select  
the television channel reserved for use with your  
DVD-VCR (or the AV input if used).  
3
4
Insert the cassette on which the programme is to be  
recorded, with the window visible and the safety tab  
intact or the opening covered with adhesive tape.  
Result: The DVD-VCR is switched on automatically.  
3
4
Insert the cassette on which the programme is to  
be recorded, with the window visible and the safety  
tab intact or the opening covered with adhesive tape.  
Result: The DVD-VCR is switched on automatically.  
Select:  
The station to be recorded using the PROG  
Select:  
(
or  
) buttons  
The station to be recorded using the PROG  
or  
(
or ) buttons  
The LINE1 source using the INPUT SEL. button  
for a satellite tuner or external video source  
or  
The LINE1 source using the INPUT SEL. button  
for a satellite tuner or external video source  
Result: The station number is displayed and the  
programme can be seen on the television.  
Result: The channel number is displayed and the  
programme can be seen on the television.  
5
6
Select the recording speed by pressing the SPEED  
button as many times as required (see page 17).  
5
6
Select the recording speed by pressing the SPEED  
button as many times as required. (see page 17)  
Hold REC ( ) down for a while to start recording.  
Result: The record indicator appears on the  
television and DVD-VCR display. An index  
is recorded on the tape (see page 22).  
Hold the REC button ( ) down for a while to start  
recording.  
Result: The record indicator appears on the  
television screen and DVD-VCR display. An  
index is recorded on the tape.  
(see page 22)  
7
To stop recording, press once.  
If your DVD-VCR ejects the cassette when you  
start recording, check to make sure that the  
cassettes safety tab is intact or that the  
opening (created by a broken safety tab) is  
covered with adhesive tape.  
7
Press the REC button ( ) several times to increase  
the recording time in:  
30-minute intervals up to four hours  
1-hour intervals up to nine hours  
If you reach the end of the tape while  
recording, the cassette rewinds automatically.  
Result: The length is displayed on the television  
displays. The selected programme is  
recorded for the length of time requested.  
At the end of that time, the DVD-VCR stops  
recording automatically and power off.  
Protecting a Recorded Cassette  
8
If you wish to cancel the recording before the end,  
press STANDBY/ON.  
Video cassettes have a safety tab to prevent accidental  
erasure. When this tab has been removed, you cannot  
record on the tape.  
If the end of the tape is reached while recording:  
The recording stops and power off.  
1
2
If you wish to protect a cassette, break off the tab  
using a small screwdriver.  
To re-record over a protected cassette (safety tab  
broken), cover the hole with adhesive tape.  
LENGTH 2:30  
SET LENGTH :  
PRESS REC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-18  
Using the Timer Programming  
Feature  
The Timer Programming feature allows you to preset  
the DVD-VCR to record a programme up to one month  
before that programme is to be broadcast. Up to six  
programmes can be preset.  
Auto Tape Speed select. The DVD-VCR’s “Auto  
Tape Speed select” function compares the  
duration of the timer recording to the actual  
recording time remaining on the tape loaded.  
If there is insufficient tape to complete a timer  
recording in AUTO mode, the DVD-VCR  
automatically switches to LP mode to record the  
whole programme.  
Before presetting a recording, check that the  
date and time are correct.  
1
Insert the cassette and press TIMER on the remote  
control.  
Result: The Timer Programming is displayed.  
Checking a Preset Recording  
You can check your preset recordings:  
2
Select the required station by pressing the  
When you have finished presetting the DVD-VCR  
If you have forgotten which programmes will be  
recorded  
,
❷ꢁbuttons or INPUT SEL. to select the LINE1,  
input sources.  
3
4
5
6
Press to select the recording day.  
Select the required day by pressing the  
Press to select the recording start time.  
Select the required hour value by pressing the  
buttons.  
Press to select the minutes.  
Select the required minute value by pressing the  
buttons.  
to select the recording stop time.  
1
Press TIMER on the remote control.  
Result: The Timer Programming is displayed.  
,❷ꢁbuttons.  
2
3
Press the  
or  
buttons to select and change any  
,  
values as required. For more details, refer to the  
previous page.  
7
8
On completion, press RETURN twice.  
,  
9
Press  
10 Select the required recording stop time by pressing  
the ❷ꢁbuttons, following the same procedure  
as when selecting the recording start time.  
,  
11 Press to select the recording speed.  
12 Press the buttons to select the SP (Standard Play),  
ꢀ❷  
,
LP (Long Play), Auto (Auto Tape speed Select)  
recording speeds.  
13 When you have finished, press the RETURN button.  
14 Press the STANDBY/ON button to activate the timer.  
Result: Before starting recording, the DVD-VCR  
compares the timer duration with the  
remaining time on the cassette.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-19  
Adjusting Picture Alignment  
Manually  
Cancelling a Preset Recording  
You can cancel any programmes that are:  
The Picture Adjustment feature allows you to adjust the  
alignment manually to obtain the best possible picture.  
Incorrect  
No longer required  
When noise bars or streaks appear during playback,  
adjust alignment manually by pressing the TRK buttons  
until the picture is clear and stable.  
1
Press TIMER on the remote control.  
Result: The Timer Programming is displayed.  
Result:  
The tracking bar appears.  
The image is adjusted.  
The tracking bar disappears when you  
release the button.  
2
Press the CLEAR button to cancel the selected  
programme.  
Result: All the recording information is deleted and  
the broadcast will not be recorded.  
3
On completion, press RETURN twice.  
Selecting the Audio Output  
Mode  
You can select the mode in which the sound is  
reproduced on the loudspeakers and AV outputs. The  
following options are available.  
Playing a Cassette  
This function allows you to play back any pre-recorded  
cassette.  
Option  
Description  
L
Used to listen to the sound on the left Hi-Fi  
channel.  
1
2
Switch on both the television and your DVD-VCR.  
Insert the video cassette to be played. If the safety  
R
Used to listen to the sound on the right  
Hi-Fi channel.  
tab on the cassette is intact, press ll  
.
Otherwise, the cassette is played automatically.  
MIX  
Used to listen to the mixed sound of the  
Hi-Fi and normal channels.  
When a cassette is loaded, the tape position is  
optimized automatically to reduce disturbance  
(Digital Auto Tracking).  
MONO  
L R  
Used to listen to the sound on the normal  
mono channel.  
When playing a cassette, if the end of the  
tape is reached, the cassette is rewound  
automatically.  
Used to listen to Hi-Fi stereo sound on the  
left and right channels.  
When playing back tapes recorded in  
Hi-Fi, the sound switches to Hi-Fi after  
five seconds of Mono.  
3
To...  
Then press...  
Stop the playback  
Eject the cassette  
(STOP).  
(EJECT).  
To select the sound mode, simply press the AUDIO  
button on the remote control until the required option is  
displayed.  
L
R
MIX  
L R  
MONO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-20  
Playing a Cassette in Slow  
Motion  
Playing a Sequence at  
Variable Speeds  
You can play a cassette in slow motion.  
You can vary the playback speed using the Shuttle  
function (up to nine times the normal speed).  
No sound is heard when playing back a  
cassette in slow motion.  
Example: You wish to analyse a sportsperson’s  
technique, movement by movement.  
1
Press:  
ll to start playing the cassette  
ll button one more time to make still mode.  
❿❿ to start SLOW mode.  
➛➛ or button as many times as required to  
decrease or increase the speed respectively  
To return to the normal speed, press the ll  
button twice.  
The Shuttle function is available on the Remote control  
No sound is heard when playing a sequence at  
variable speeds.  
1
2
Press:  
ll during playback  
SHUTTLE (<<) to play the cassette backwards  
SHUTTLE (>>) to play the cassette forwards  
2
When playing back in slow motion, picture  
interference may occur.  
Each time you press a SHUTTLE button, the speed  
is changed as shown in the following illustration.  
Press the TRK buttons to minimize this effect.  
When you have been using the Slow Motion  
function for more than about two minutes, the  
DVD-VCR will automatically play to protect the:  
REVERSE REVERSE REVERSE  
SLOW  
STILL MOTION MOTION PLAY  
X1/10 X1/5  
SLOW  
PLAY PLAY PLAY  
X3 X5 X9  
Cassette  
Video heads  
PLAY  
X9  
PLAY  
X5  
PLAY  
X3  
Playing a Sequence Frame by  
Frame  
You can  
Stop the cassette at a given frame (image)  
Advance one frame at a time  
No sound is heard when playing back frame by  
frame.  
1
Press:  
ll to start playing the cassette  
ll button one more time to make still mode.  
F.ADV/STEP to advance frame by frame  
2
To return to normal playback, press ll.  
Vertical stability: When playing back frame by  
frame, interference may be seen on the screen.  
Press the TRK buttons to minimize this effect.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-21  
Searching for a Specific Sequence  
Each time you record a cassette on this DVD-VCR, an  
“index” is automatically marked on the tape when  
recording starts.  
Intro Scan  
1
After pressing the SEARCH, press the  
corresponding buttons, until the Intro Scan  
,
The Search function allows you to fast-forward or  
rewind to a specific index and start playback from that  
point. Depending on the direction selected, the indexes  
are numbered as follows:  
option is selected.  
2
3
Press the OK or  
.  
Press the or buttons depending on the  
direction where your desired programme is located.  
4
5
When an Index mark is found the DVD-VCR will  
playback the tape for 5 seconds, after which it will  
continue searching for the next Index mark.  
Prev  
Seq.  
Seq. being  
played  
Next  
Seq.  
etc.  
etc.  
2
1
1
2
If you want to watch the tape from a particular  
Index, simply press  
II  
twice.  
This DVD-VCR uses a standard indexing system  
(VISS). As a result, it will recognize any indexes  
marked by other VCRs using the same system  
and vice versa.  
INTRO SCAN  
:
Go To [0:00:00] Stop  
Use this feature when you want to search for the  
0:00:00 counter position on a cassette. Press the  
CLEAR button at the point on the tape where you want  
to set the counter to 0:00:00.  
The VCR will rewind or fast forward, searching for the  
0:00:00 counter position, and then automatically stop at  
that position.  
Index Skip Search  
This feature will enable you to fast forward/rewind to a  
specific point on a tape: E.g. if you have recorded 3  
different programmes on a tape and you have rewound  
the tape to the beginning, by using this feature you can  
go directly to the start of programme 2 simply by  
pressing the SEARCH button.  
1
After pressing the SEARCH, press the  
corresponding buttons, until the Go To  
[0:00:00] option is selected.  
,  
1
After pressing the SEARCH, press the  
corresponding buttons, until the Intro Scan  
option is selected.  
,  
2
3
Press the OK or  
.  
Press the or buttons twice more.  
This will take you directly to the start of the desired  
programme is located.  
2
Press the OK or  
.
4
5
These Index searches can be made forwards:  
(press ) or backwards: (press ).  
◆ ◆  
(
➛➛ -20  
To cancel an Index search simply press the  
button.  
0
+20 ✌  
End Search  
or  
II  
Use this feature when you want to search for a blank  
position to record a program on a cassette.  
The VCR will fast forward, searching for a blank  
position, and then automatically stop at that position.If  
the VCR reaches the end of the tape during end  
search, the tape will be ejected.  
INDEX SEARCH  
:
-
6
1
After pressing the SEARCH, press the  
corresponding or buttons, until the End  
Search option is selected.  
2
Press the OK or  
.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-22  
Using the Assemble Edit  
Function  
Using the Tape Counter  
The tape counter:  
This function allows you to start a new recording at a  
specific position on the cassette while maintaining a  
very smooth scene change.  
Indicates the elapsed time in the play and record  
modes (hours, minutes and seconds)  
Is reset when a cassette is inserted in the DVD-VCR  
Allows you to find the beginning of a sequence easily  
1
2
3
Insert the cassette to be edited in your DVD-VCR.  
Press the ll button to start playback.  
When you reach the position from which you wish  
to start the new recording, press the ll button.  
If the remaining time is to be calculated  
correctly, you must indicate the type of cassette  
being used.  
4
5
6
Press the F.ADV/STEP button again as often as  
necessary to advance frame by frame, until the  
exact recording position is located.  
1
Insert a cassette in your DVD-VCR.  
2
To set the tape counter to zero at the beginning of a  
sequence:  
While the DVD-VCR is in still mode, hold the REC  
button  
Assemble Edit function.  
(
)
down for a while to activate the  
Press INFO. twice to display the counter  
Press CLEAR when you want to set the tape  
counter to zero.  
Select the source from which you wish to record by  
pressing:  
The PROG buttons for television channels  
The INPUT SEL. button for the LINE input  
sources  
7
8
Press the ll button to start recording.  
When you have finished recording, press  
.
0:00:00  
3
When you are ready,  
Start playback or Recording.  
Press the button.  
To fast-froward or rewind to the sequence at  
which the counter was set to zero, press or  
.  
Some DVD-VCR information, such as the counter,  
can be displayed on the television screen (unless  
you have deactivated the Screen messages mode;  
refer to page 16).  
Press INFO.:  
Once to display the current function,  
programme number, recording speed, date,  
time and counter  
Twice to display the counter only  
Three times to display the time remaining on  
the cassette  
Four times to clear the display  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-23  
Recording from Another  
VCR or Camcorder  
Using the KARAOKE Function  
1
2
Press the STANDBY/ON button and insert  
KARAOKE tape.  
You can copy a cassette to your DVD-VCR from  
another video source, such as another VCR or a  
camcorder.  
Connect Mic into MIC1 or MIC2 jack.  
Then the KARAOKE mode is transferred ON”  
mode.  
It is an infringement of copyright laws to copy  
prerecorded cassettes or to re-record them in any  
form without the permission of the owners of the  
corresponding copyright.  
Disconnect the Mic makes the KARAOKE mode  
transfer to OFFmode automatically.  
Press the KARAOKE button on the remote  
control.  
1
Connect the DVD-VCR, from which the cassette is  
to be copied, to the appropriate audio and video  
input connectors on the rear of your DVD-VCR, as  
indicated on page 7.  
Press the  
or  
button to select KARAOKE  
mode ON.  
3
4
Adjust the Mic volume and ECHO level.  
Sing with accompaniment.  
2
3
Insert a blank cassette in your DVD-VCR.  
Insert the pre-recorded cassette in the other video  
source (VCR or camcorder).  
4
Press the INPUT SEL. button to select the  
appropriate input on your DVD-VCR: LINE IN for  
the AV input.  
SCORE Function  
5
6
Start playing back the cassette to be copied.  
1
2
Press the KARAOKE button on the remote control.  
Hold REC  
on your DVD-VCR.  
(
)
down for a while to start recording  
Press the corresponding  
the SCORE mode.  
or  
buttons to select  
7
When you have finished recording, press  
both VCR and DVD-VCR.  
on  
3
4
Press the  
or  
buttons to select the SCORE  
mode ON.  
Score will pop up whenever a song is completed.  
If you wish to view the cassette being copied:  
Your DVD-VCR must be connected as usual to  
the television (see page 6~7 for further details)  
KARAOKE :ON  
SCORE :ON  
➛❿  
➛❿  
KARAOKE SEARCH Function  
1
2
Press the STANDBY/ON button and insert  
KARAOKE tape.  
Press the KARAOKE button on the remote control.  
Press the  
or  
button to select KARAOKE mode  
ON.  
3
4
Press  
to start playing the cassette.  
II  
When you want the next song during playing a  
song, press the KARAOKE SEARCH or  
KARAOKE SEARCH buttons on the remote  
control.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-24  
Setting Up the Language  
Features  
Choosing a Connection  
If you set the player menu’s disc menu, audio and  
subtitle language in advance, they will come up  
automatically every time you watch a movie.  
The following show examples of connections commonly  
used to connect the DVD -VCR player with a TV and  
other components. It is only available for DVD. The  
VCR out can not watch by this connection.  
Using the Disc Menu Language  
Connection to  
an Audio System  
Connection to a  
Television  
This function changes the text language only on the  
disc menu screens.  
1
2
With the unit in Stop mode, press the MENU button.  
Select DVD using  
,
buttons, then OK or  
Television  
button  
Setup  
Setup  
Display Setup  
Setup  
Dolby Digital  
Decoder Digital  
Audio Input Jack  
:
COAXIAL  
OPTICAL  
3
Select Language Setup using  
,
buttons, then  
press the OK or  
button.  
or  
Language Setup  
Disc Menu  
Audio  
:
:
:
English  
English  
Automatic  
or  
Subtitle  
4
5
Select Disc Menu using  
the OK or ❿ꢁbutton.  
,
buttons, then press  
COAXIAL OPTICAL  
Use the  
,
buttons to select English.  
- Select Othersif the language you want is not  
listed.  
Disc Menu Language  
Component  
Video Jack  
Digital Audio  
out Jack  
S-Video  
Jack  
Disc Menu  
6
Press the OK button.  
- English is selected and the screen returns to  
Language Setupmenu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-25  
Setting Up the Language Features  
Using the Subtitle Language  
Using the Audio Language  
1
2
3
With the unit in Stop mode, press the MENU button.  
Select DVD using buttons, then OK or ❿ꢁbutton.  
Select Language Setup using buttons, then  
1
2
3
With the unit in Stop mode, press the MENU button.  
Select DVD using buttons, then OK or ❿ꢁbutton.  
Select Language Setup using buttons, then  
,❷  
,❷  
,❷  
,❷  
press the OK or  
button.  
press the OK or  
button.  
Language Setup  
Language Setup  
Disc Menu  
Audio  
:
:
:
English  
English  
Automatic  
Disc Menu  
Audio  
:
:
:
English  
English  
Automatic  
Subtitle  
Subtitle  
4
5
Select Subtitle using  
OK or ❿ꢁbutton.  
,❷  
buttons, then press the  
4
5
Select Audio using  
OK or button.  
,❷  
buttons, then press the  
Use the  
,❷  
buttons to select English.  
Press the  
,❷  
buttons to select English.  
- Select Originalif you want the default soundtrack  
language to be the original language the disc is  
recorded in.  
- Select Automaticif you want the subtitle  
language to be the same as the language selected  
as the audio preference.  
- Select Othersif the language you want is not listed.  
Subtitle Language  
Automatic  
Subtitle  
- Select Othersif the language you want is not  
listed. Some discs may not contain the language  
you select as your initial language; in that case the  
disc will use its original language setting.  
6
Press the OK button.  
- English is selected and the screen returns to  
Language Setup menu.  
6
Press the OK button.  
- English is selected and the screen returns to  
Language Setup menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-26  
Setting Up the Audio Options  
1
2
With the unit in Stop mode, press the MENU button.  
DTS  
Select DVD using  
,❷  
buttons, then OK or ❿ꢁbutton.  
1. Off :  
2. On :  
Doesnt output digital signal.  
Outputs DTS Bitstream via digital  
output only. Select DTS when  
connecting to a DTS Decoder.  
Setup  
Setup  
Display Setup  
Setup  
Dynamic Compression  
:
1. On :  
2. Off :  
To select dynamic compression.  
To select the standard range.  
PCM Down Sampling  
1. On :  
2. Off :  
Select this when the amplifier  
connected to the player is not 96KHz  
compatible.  
In this case, the 96KHz signals will be  
down converted to 48KHZ.  
3
4
Select Audio Setup using  
the OK or button.  
,❷  
buttons, then press  
Use the buttons to select the desired item.  
,❷  
Then press the OK or  
button.  
Select this when the amplifier  
connected to the player is 96KHz  
compatible.  
In this case, all signals will be output  
without any changes.  
Dolby Digital Out  
MPEG-2 Digital Out  
DTS  
PCM Down Sampling  
How to make the SETUP menu disappear or  
return to menu screen during set up; Press  
RETURN or  
button.  
Manufactured under license from Dolby  
Laboratories. Dolbyand the double-D symbol are  
trademarks of Dolby Laboratories.  
Dolby Digital Out  
1. PCM :  
Converts to PCM(2CH) audio.  
Select PCM when using the Analog  
Audio Outputs.  
• “DTSand DTS Digital Outare trademarks of  
Digital Theater Systems, Inc.  
2. Bitstream : Converts to Dolby Digital Bitstream  
(5.1CH). Select Bitstream when using  
the Digital Audio Output.  
Be sure to select the correct Digital Output or no  
audio will be heard.  
MPEG-2 Digital Out  
1. PCM : Converts to PCM(2CH) audio.  
Select PCM when using the Analog  
Audio Outputs.  
2. Bitstream : Converts to MPEG-2 Digital Bitstream  
(5.1CH or 7.1CH).Select Bitstream  
when using the Digital Audio Output.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-27  
Setting Up the Display Options  
1
2
With the unit in Stop mode, press the MENU button.  
TV Aspect  
Depending on the type of television you have, you  
may want to adjust the screen setting (aspect ratio).  
Select DVD using  
,❷  
buttons, then OK or  
button.  
1. 4:3 Letter Box : Select when you want to see  
the total 16:9 ratio screen DVD  
supplies, even though you have  
a TV with a 4:3 ratio screen.  
Setup  
Setup  
Display Setup  
Setup  
:
Black bars will appear at the  
top and bottom of the screen.  
2. 4:3 Pan Scan : Select this for conventional size  
TVs when you want to see the  
central portion of the 16:9  
screen. (Extreme left and right  
side of movie picture will be cut  
off.)  
3
4
Select Display Setup using  
press the OK or button.  
,❷  
buttons, then  
Use the buttons to select the desired item.  
,❷  
3. 16:9 Wide :  
You can view the full 16:9  
picture on your widescreen TV.  
Then press the OK or  
button.  
Display Setup  
Black Level  
TV Aspect  
:
:
4:3 L-Box  
PAL 60  
Black Level  
Adjusts the brightness of the screen.(On/Off)  
PAL60  
NTSC  
NTSC Disc Output  
NTSC Disc Output  
NTSCif the screen only has one NTSC-video  
entrance. If this is not the case, you can choose  
to leave PAL60as is.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-28  
Setting Up the Parental Control  
The Parental Control function works in conjunction  
with DVDs that have been assigned a rating - which  
helps you control the types of DVDs that your family  
watches.  
There are up to 8 rating levels on a disc.  
1
2
3
With the unit in Stop mode, press the MENU button.  
Select DVD using buttons, then OK or button.  
Select Parental Setup using buttons, then  
press the OK or button.  
,❷  
,❷  
Setup  
Setup  
Display Setup  
Setup  
:
.
.
About the Rating Level ;  
The Rating Level will work only when Use Password  
is set to Yes. To unlock the player, use ❿ꢁor OK to  
4
Use OK or  
to select Yes if you want to use a  
select No. Use  
,❷  
to select Rating Level. Press  
password. The Enter Password screen appears.  
OK.  
- Use  
,❷  
to select the level(e.g. Level 6) and  
Parental Setup  
press OK. Discs that contain Level 7 will now not  
play.  
No  
Yes  
Use Password  
:
No  
- To cancel the rating level, use  
No in Use Password.  
or OK to select  
About the Change Password ;  
- Use to select Change Password.  
,❷  
Press OK. The Change Password screen appears.  
- Enter your new password. Re-Enter the new  
password again.  
How to make the SETUP menu disappear or  
return to menu screen during set up;  
Press RETURN or  
button.  
~
If you have forgotten your password, see Forget  
Password in the Troubleshooting Guide.  
5
Enter your password. The Re-Enter Password  
screen appears to confirm the password.  
Enter your password again. The Parental Setup  
screen appears.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-29  
Special Playback Features  
A/V Receiver Connections  
During DVD/CD playback you can select from the  
following special playback options. To resume normal  
To take full advantage of the movie theater experience  
that DVD offers, you may want to connect your DVD-  
VCR to a complete Surround Sound system, including  
an A/V Receiver and six Surround Sound speakers.  
playback, press the  
ll button.  
1
Still  
Before You Begin...  
Press the  
playback.  
ll button on the remote control during  
If your A/V receiver is equipped with a Dolby  
Digital Decoder, you have the option to bypass the  
DVD-VCR’s built-in Dolby Digital Decoder. Use the  
Digital Audio Out connection below.  
The picture will still and the audio will mute.  
To resume playback, press the ll button.  
If the player is left in Still mode for 5 minutes, it  
will stop automatically.  
2
Frame Advance (Step)  
While in playback mode, press the F.ADV/STEP  
button on the remote control to advance one frame  
at a time.  
Audio is muted during Frame Advance mode.  
Press  
ll to resume normal playback.  
O R ꢁ  
NOTE: Frame Advance operates only in the forward  
direction.  
To Digital Audio Input of an A/V  
Receiver with a Dolby Digital Decoder  
3
Skip Forward/Back  
While a CD or DVD disc is in Play mode, press the  
Skip l/ l buttons on the remote control or  
front panel to jump forward and backward through  
disc chapters/tracks.  
Skip Forward will jump to the next chapter/track.  
Skip Back will jump to the beginning of the current  
chapter/track.  
1
Digital Audio Out  
Connect EITHER an optical cable OR a digital  
coaxial cable from the Digital Audio Out jacks on the  
back panel of the DVD-VCR to their corresponding  
Digital Audio Input jacks on your A/V Receiver:  
Optical  
Coaxial  
Press Skip Back again to jump to the beginning of  
the previous chapter/track.  
Use whichever connection is available on your  
A/V Receiver.  
Search Forward/Back  
While a disc is in Play mode, press and hold the ➛  
/
❿❿ buttons on the remote control or front panel to  
visually search forward/backward at 2X - 4X - 8X -  
16X - 32X - 128X speed. Press  
resume normal speed.  
ll button to  
4
5
Slow Motion  
During playback, press the  
ll button to Still the  
image. Then use the Search to play in slow  
motion at variable speeds.  
Each press increases the slow motion speed  
playback to 1/8, 1/4 or 1/2 normal speed.  
Audio is muted during slow motion playback.  
Stop/Resume  
Press the Stop button once to stop playback.  
To resume the DVD/CD from the point where the  
disc stopped, press the  
ll button.  
Press the button twice to completely stop  
playback. The next time you press  
start over from the beginning.  
ll, the disc will  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-30  
Component Connections (for DVD)  
Component video output is available only for DVD  
playback. RF and Line output are available for Tuner  
and VCR playback.  
If your TV set supports Progressive Scan, it can transmit  
Pr, Pb, and Y signals separately, so you can enjoy sharp  
and clear picture.  
Press OK to confirm Progressive  
scan mode. Otherwise press  
RETURN .  
What is Progressive Scan?  
It is a set of jacks that can provide sharp and clear  
picture quality by using twice the number of fields of  
lines than component output.  
1
Connect the component output of the DVD player  
to your TV set.  
Use the component cable to connect the  
component output on the back panel of the DVD-  
VCR to the component input of your TV.  
Please set your TV to component  
Input. If your TV doesn't have  
Progressive scan mode, there will  
be no signal on the screen.  
If you mix up the connections when connecting  
the component cable, the picture will appear  
reddish or bluish.  
2
3
Set your TV to COMPONENT.  
Select component input as your TV's AV input. At  
this point, even if the picture appears reddish, it is  
normal.  
Press the Progressive button on the front panel.  
If the Progressive button on the front panel of the  
DVD-VCR is pressed, the following message will  
be displayed:  
To activate Progressive Scan, press OK.  
The following message will be displayed and then  
the picture will be played in Progressive Scan  
mode.  
4
To deactivate Progressive Scan, press the  
Progressive button again.  
If the Progressive button on the front panel of the  
DVD-VCR is pressed again, Progressive Scan  
mode will be canceled. Select another mode as  
your TV's AV input to view another output of the  
DVD-VCR.  
This is available only for a TV set that supports  
Progressive Scan.  
While Progressive Scan is active, video,  
S-video, and A/V output are not available.  
To activate Progressive Scan, the DVD-VCR  
must be in Stop mode.  
You can listen to audio sound through Rear audio  
output while watching Component or S-Video  
output.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-31  
Adjusting the Aspect Ratio (EZ View)  
If you are using a 4:3 TV  
To play back using aspect ratio (DVD)  
1
Press the EZ VIEW button.  
For 16:9 aspect ratio discs  
The screen size changes when the button is  
pressed repeatedly.  
4:3 Letter Box  
Displays the content of the DVD title in 16:9 aspect  
ratio.  
The black bars will appear at the top and bottom of  
the screen.  
The screen zoom mode operates differently  
depending on the screen setting in the initial DVD  
menu.  
To ensure correct operation of the EZ VIEW  
button, you should set the correct aspect ratio in  
the initial setup.  
4:3 Pan Scan  
The left and right of the screen are cut off and  
displays the central portion of the 16:9 screen.  
Screen Fit  
The top and bottom of the screen are cut off and the  
full screen appears. The picture will look vertically  
stretched.  
If you are using a 16:9 TV  
For 16:9 aspect ratio discs  
Zoom Fit  
Wide Screen  
When a 4:3 DVD is viewed on a 16:9 TV, black bars  
will appear at the left and right of the screen in order  
to prevent the picture from looking horizontally  
stretched.  
Displays the content of the DVD title in 16:9 aspect  
ratio.  
Screen Fit  
The top and bottom of the screen are cut off. When  
playing a 2.35:1 aspect ratio disc, the black bars at  
the top and bottom of the screen will disappear.  
The picture will look vertically stretched. (Depending  
on the type of disc, the black bars may not  
disappear completely.)  
For 4:3 aspect ratio discs  
Normal Screen  
Displays the content of the DVD title in 4:3 aspect  
ratio.  
Zoom Fit  
Screen Fit  
The top, bottom, left and right of the screen are cut  
off and the central portion of the screen is enlarged.  
The top and bottom of the screen are cut off and the  
full screen appears. The picture would look vertically  
stretched.  
Zoom Fit  
For 4:3 aspect ratio discs  
The top, bottom, left and right of the screen are cut  
off and the central portion of the screen is enlarged.  
Normal Wide  
Displays the content of the DVD title in 16:9 aspect  
ratio. The picture will look horizontally stretched.  
Screen Fit  
The top and bottom of the screen are cut off and the  
full screen appears. The picture will look vertically  
stretched.  
This function may behave differently depending on  
the type of disc.  
Zoom Fit  
The top, bottom, left and right of the screen are cut  
off and the central portion of the screen is enlarged.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-32  
Using the Display Function  
4
To make the screen disappear, press the INFO.  
button again.  
When Playing a DVD/VCD/CD  
• What is a Chapter?  
Each Title on a DVD is usually divided into  
chapters (similar to tracks on an audio CD).  
1
2
3
During play, press the INFO. button on the remote.  
Use the  
Use the  
,
buttons to select the desired item.  
• What is a Title?  
,
buttons to make the desired setup.  
A DVD may contain several different titles.  
For example, if a disc contains four different  
movies, each might be considered a title.  
You may use the number buttons of the remote  
control to directly access a title, chapter or to start  
the playback from the desired time.  
To access the desired title when there is more than  
one in the disc. For example, if there is more than  
one movie on a DVD, each movie will be identified.  
TITLE  
ENG 5.1CH  
ENG  
Most of DVD discs are recorded in chapters so that  
you can quickly find a specific passage.  
Off  
CHAPTER  
TIME  
Allows playback of the film from a desired time.  
You must ok the starting time as a reference.  
Refers to the language of the film soundtrack. In the  
example, the soundtrack is played in English 5.1CH.  
A DVD disc can have up to eight different  
soundtracks.  
AUDIO  
ENG 5.1CH  
ENG  
Off  
Refers to the subtitle languages available in the disc.  
You will be able to choose the subtitles language or,  
if you prefer, turn them off from the screen.  
SUBTITLE  
A DVD disc can have up to 32 different subtitles.  
A surround sound effect is generated using only two  
front speakers.  
ENG 5.1CH  
3D SOUND  
ENG  
Off  
* When in VCD 2.0 mode (MENU ON mode), this function does not  
~
work.  
Use the DISC MENU button in VCD 2.0 mode to select MENU  
ON or OFF.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-33  
Selecting the Subtitle  
Language  
Changing the Camera Angle  
You can select a desired subtitle quickly and easily with  
the subtitle button.  
Using the ANGLE button  
When a DVD contains multiple angles of a particular  
scene, you can select the Angle function.  
Using the SUBTITLE button  
1
2
Press the SUBTITLE button.  
Use the ❿ꢁbuttons to select the desired subtitle  
language.  
Use the buttons to determine whether or not  
Press the ANGLE button to see if an ANGLE  
,
(
) mark is present at the upper Right hand corner  
of the screen.  
3
,
1
When an ANGLE mark is shown, press the ANGLE  
the subtitle will be displayed.  
button, then an ANGLE select icon will appear at the  
upper left hand corner of the screen.  
The subtitle languages are represented by  
abbreviations.  
2
3
Use the  
angle.  
,
buttons to select the desired screen  
ENG  
On  
To turn off the display, press the ANGLE button  
again.  
ENG  
Off  
This function depends on what languages are  
encoded on the disc and may not work with all DVDs.  
A DVD disc can contain up to 32 subtitle languages.  
How to have the same subtitle language come up  
wheneveryou play a DVD; Refer to Setting Up the  
Language Featureson page 26.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-34  
Repeat Play  
Selecting the Audio Language  
Repeat the current track, chapter, title, a chosen section  
(A-B), or all of the disc.  
You can select a desired language quickly and easily  
with the AUDIO button.  
When playing a DVD  
Using the Audio button  
1
2
Press the REPEAT button on the remote.  
Repeat screen appears.  
1
2
Press the AUDIO button.  
Use the buttons to select the desired language  
on a DVD.  
- The audio languages are represented by abbreviations.  
Use the buttons to select Stereo, or  
,
Select Chapter, Title or A-B using the  
Press the REPEAT button. Select A-B on screen  
with the buttons.  
,
buttons.  
,
3
,
Press OK at the point where you want the repeat  
play to start (A). The B is automatically highlighted.  
Press OK at the point where you want the repeat  
play to stop (B).  
(On VCD/CD)  
DVD  
To terminate the function, press the CLEAR button.  
A-B REPEAT does not allow you to set point (B)  
until at least 5 seconds has elapsed after point (A)  
has been set.  
DVD  
Chapter Title A - B  
Off  
VCD / CD  
VCD / CD  
Track Disc A - B  
Off  
This function depends on what languages are  
encoded on the disc and may not work with all DVDs.  
A DVD disc can contain up to 8 audio languages.  
How to have the same audio language come up  
whenever you play a DVD ; Refer to Setting Up  
the Language Featureson page 26.  
3
Press OK.  
4
To return to normal play, press REPEAT again, then  
press the buttons to select Off and press OK.  
It is available to press CLEAR button on the  
,
remote controller in order to stop REPEAT play.  
DVD repeats play by chapter or title, CD and VCD  
repeat play by disc or track.  
Depending on the disc, the Repeat function may  
not work.  
When in VCD 2.0 mode (MENU ON mode), this  
function does not work.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-35  
Using the Mark Function  
MP3/WMA Play  
This feature lets you mark sections of a DVD or VCD  
(MENU OFF mode) so you can quickly find them at a  
later time.  
If you insert an MP3/WMA Disc into the DVD-VCR  
player, you can see the folder directory.  
Select the desired folder in the root directory.  
Use the OK or ll button to select the desired  
folder.  
Using the Mark Function (DVD/VCD)  
1
During play, press the MARK button on the remote.  
The Mark icons will be displayed.  
MP3/WMA Play Function  
1
Press the OK or ll button, the selected music file  
will be played back.  
Up to 8 music folders can be displayed at a time. If  
you have more than 8 folders on a disc, press the  
button to display them on the screen.  
Total : 1/2  
ROOT  
ROOT  
20020822094  
MP3  
CLEAR  
2
Use the  
,
buttons to select the desired music  
folder, then press OK.  
Press the buttons again to select a music  
file. Press the OK button to begin playback of a  
music file.  
2
3
Use the  
icon.  
,
buttons to move to the desired Mark  
,
When you reach the scene you want to mark, press  
the OK button. The icon will change to a number  
(1, 2, or 3).  
4
Press the MARK button to turn off the display.  
Total : 1/3  
ROOT  
..  
20020822094  
MP3  
A
B
C
Recalling a Marked Scene  
1
2
3
During play, press the MARK button on the remote.  
Use the buttons to select a marked scene.  
Press the ll buttons to skip to the marked scene.  
,
Clearing a Mark  
1
2
During play, press the MARK button on the remote.  
Use the buttons to select the mark number  
you want to delete.  
,
3
Press the CLEAR button to delete a mark number.  
Press the MARK button to turn off the display.  
Up to three scenes may be marked at a time.  
When in VCD 2.0 mode (MENU ON mode), this  
function does not work.  
Depending on the disc, the mark function may not  
work.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-36  
MP3/WMA Play  
Use a decompression transfer rate of at least  
128Kbps when recording MP3 files.  
Program/Random playback  
Sound quality with MP3 files basically depends on the  
rate of compression/decompression you choose.  
Getting audio CD quality sound requires an  
analog/digital sampling rate, that is conversion to MP3  
format, of at least 128 Kbps and up to 160 Kbps.  
However, choosing higher rates, like 192 Kbps or  
more, only rarely give better sound quality.  
1
Press the MODE button in STOP mode to switch  
between the RANDOM and PROGRAM modes.  
PROGRAM  
RANDOM  
Conversely, files with decompression rates below 128  
Kbps will not be played properly.  
Use a decompression transfer rate of at least  
64Kbps when recording WMA files.  
Sound quality with WMA files basically depends on  
the rate of compression/decompression you choose.  
Getting audio CD quality sound requires an  
analog/digital sampling rate, that is conversion to  
WMA format, of at least 64Kbps and up to 192Kbps.  
Conversely, files with decompression rates below  
64Kbps or over 192Kbps will not be played properly.  
Press the REPEAT button in PLAY mode to hear  
only music continuously and press it once again to  
release.  
CD-R MP3/WMA discs  
Do not try recording copyright protected MP3  
files.  
When playing CD-R/MP3 or WMA discs, please  
follow all the recommendations for CD-R above,  
plus the comments below:  
Certain "securized" files are encrypted and code  
protected to prevent illegal copying. These files are of  
the following types: Windows MediaTM (registered  
trade mark of Microsoft Inc) and SDMITM (registered  
trade mark of The SDMI Foundation). You cannot  
copy such files.  
Your MP3 or WMA files should be ISO 9660 or  
JOLIET format.  
ISO 9660 format and Joliet MP3 or WMA files are  
compatible with Microsoft's DOS and Windows, and  
with Apple's Mac. These two formats are the most  
widely used.  
Important :  
The above recommendations cannot be taken as a  
guarantee that the DVD player will play MP3  
recordings, or as an assurance of sound quality.  
You should note that certain technologies and  
methods for MP3 file recording on CD-Rs prevent  
optimal playback of these files on your DVD player  
(degraded sound quality and in some cases, inability  
of the player to read the files).  
When naming your MP3 or WMA files do not  
exceed 8 characters, and place ".mp3, .wma" as  
the file extension.  
General name format of: Title.mp3. or Title.wma.  
When composing your title, make sure that you use 8  
characters or less, have no spaces in the name, and  
avoid the use of special characters including:  
(.,/,\,=,+).  
This unit can play a maximum of 500 files and 300  
folders per disc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-37  
Program Play & Random Play  
Picture CD Playback  
CD-R JPEG Discs  
Program Play (CD/MP3/WMA)  
1
2
Press the MODE button.  
Use the buttons to select PROGRAM.  
Press the OK button.  
Only files with the ".jpg" and ".JPG" extensions can be  
played.  
,
If the disc is not closed, it will take longer to start  
playing and not all of the recorded files may be  
played.  
PROGRAM  
RANDOM  
Only CD-R discs with JPEG files in ISO 9660 or Joliet  
format can be played.  
The name of the JPEG file may not be longer than 8  
characters and should contain no blank spaces or  
special characters (. / = +).  
Only a consecutively written multisession disc can be  
played. If there is a blank segment in the multisession  
disc, the disc can be played only up to the blank  
segment.  
3
Use the  
track to add to the program.  
Press the OK button. The selection numbers appear  
in the Program Order box.  
,
❷ꢁ  
/
,
buttons to select the first  
A maximum of 500 images can be stored on a single  
CD.  
PROGRRAM 01  
Only Kodak Picture CDs can be played.  
Track  
Program order  
- - - - - - - -  
- - - - - - - -  
- - - - - - - -  
- - - - - - - -  
- - - - - - - -  
01 02 03 04  
05 06 07 08  
09 10 11 12  
13 14 15 16  
When playing a Kodak Picture CD, only the JPEG  
files in the pictures folder can be played.  
Picture discs other than Kodak Picture CD may take  
CLEAR  
longer to start playing or may not play at all.  
If a number of files in 1 Disc is over 500, only 500  
JPEG file can be played.  
4
Press the  
button.  
II  
The disc will be played in programmed order.  
If a number of folders in 1 Disc is over 300, only  
JPEG files in 300 folders can be played.  
Random Play (CD/MP3/WMA)  
1
2
Press the MODE button.  
Use the buttons to select RANDOM.  
Press the OK button.  
,
The disc will be played in random order.  
PROGRAM  
RANDOM  
Depending on the disc, the Program and Random  
Play functions may not work.  
To resume normal play, press the CLEAR button.  
This unit can support a maximum of 20  
programmed order.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-38  
Picture CD Playback  
1
2
Open the disc tray.  
Total : 1/3  
ROOT  
ROOT  
Load the disc on the tray.  
Load the disc with the labeled side up.  
D CD1  
D CD2  
D CD3  
3
Close the tray.  
- The tray closes and you should get a screen that  
looks like the one below.  
Use the  
,
buttons on the remote controller  
to select the picture you want to view and then  
press the OK button.  
Photo : 1 /215  
To see the next 6 pictures, press the ❿  
l
button.  
To see the previous 6 pictures, press the button.  
l
:
:
Return to the Album Screen.  
Each time the OK button is pressed, the  
picture rotates 90 degrees clockwise.  
:
Each time the OK button is pressed, the  
picture is enlarged up to 4X.  
Album  
Photo : 1 /215  
(Normal  
2X  
4X  
Normal)  
:
The unit enters slide show mode.  
* Press the RETURN button to return to the album screen.  
* Before the Slide Show can begin, the picture interval  
must be set.  
:
When this icon is selected and OK is  
pressed, the pictures change automatically  
with about an 6 second interval.  
Timer :  
:
:
The pictures change automatically with about  
an 12 second interval.  
The pictures change automatically with about  
an 18 second interval.  
* Depending on the file size, each interval between  
images may take longer or shorter than the manual  
suggests.  
If no buttons on the remote control are pressed for  
10 seconds, the menu will disappear.  
Press the DISC MENU button on the remote  
control to display the menu again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-39  
DivX/XviD/MPEG4 Special Playback Features  
5
Zoom  
During DivX/XviD/MPEG4 playback you can select  
from the following special playback options. To resume  
During play, press the MENU button on the remote.  
Then press the corresponding  
select the FUNC option.  
,❷  
buttons to  
normal playback, press the  
ll button.  
1
Still  
Auto Scaling : CIF(100kbps)~D1(784kbps)  
resolution.  
If the file resolution is small, it scales up to 2 times  
automatically. So you can see the more larger  
screen.  
Press the  
playback.  
ll button on the remote control during  
The picture will still and the audio will mute.  
To resume playback, press the ll button.  
If the player is left in Still mode for 5 minutes, it  
will stop automatically.  
2
Frame Advance (Step)  
While in playback mode, press the F.ADV/STEP  
button on the remote control to advance one frame  
at a time.  
Audio is muted during Frame Advance mode.  
Press  
ll to resume normal playback.  
NOTE: Frame Advance operates only in the forward  
direction.  
3
4
Slow Motion  
During playback, press the  
ll button to Still the  
image. Then use the Search to play in slow  
motion at variable speeds.  
Each press increases the slow motion speed  
playback to 1/8, 1/4 or 1/2 normal speed.  
Audio is muted during slow motion playback.  
Stop/Resume  
Press the  
To resume the DivX/XviD/MPEG4 from the point  
where the disc stopped, press the ll button.  
button once to stop playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-40  
DivX/XviD/MPEG4 Playback  
1
When the disc is inserted, the file structure of the  
disc will be shown. Depending on the file format, a  
DivX/XviD/MPEG4 Feature Table  
different icon will appear next to each file. The  
,
, and  
Use  
OK or  
files will have been highlighted.  
to select the movie file, and then press  
MPEG4 Supported  
,
Avi files are used to contain the audio and video data;  
these must be stored on CD in the ISO 9660 format.  
.
II  
Result : When the 'Reading Index......' message is  
displayed, wait for a second or two. The  
movie will be played back.  
SPEC  
VIDEO Compatibility DivX 3.11 upper Up to the latest VERSION  
XviD  
Total : 1/3  
ROOT  
ROOT  
D CD1  
WMV(?)  
MP3  
AC3  
WMV V1/V2/V3/V7  
CBR : 80kbps~320kbps  
CBR : 128kbps~448kbps  
DivX  
DivX  
DivX  
AUDIO Compatability  
D CD2  
D CD3  
AAC(?)  
WMA  
CBR : 56kbps~160kbps  
MPEGs containing DivX can be divided into Video  
and Audio.  
If the "Codec. Not Supported" message is displayed, the  
selected file cannot be played back.  
Video compatibility : All versions of DivX later than  
3.11 (including the latest 5.1)  
are supported. In addition,  
1
To navigate to a specific time while viewing the  
movie, press the INFO. key.  
XviD is supported. For WMV,  
V1, V2, V3, and V7 formats  
are possible.  
The file format of the current file (  
,
, or  
)
and time information will be displayed.  
Audio compatibility : MP3s encoded at bitrates from  
80kbps to 320kbps, AC3s from  
128kbps to 448kbps, and  
2
Use the numeric keys on the remote control to enter  
the time to jump to that time in the movie.  
WMAs from 56kbps to  
160kbps are supported.  
DivX  
In addition, for subtitles, Samsung will support Text  
format (SMI).  
1/1  
XXX  
~
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-41  
Beginning Karaoke Functions  
Reserving a Song  
1
Connect the Mixed Audio Out terminals with the TV  
or AMP.  
It is the function to reserve the desired song in advance  
by use of Karaoke function.  
2
3
Press the STANDBY/ON button.  
1
Playback the Karaoke Disc containing the wanted  
songs.  
Connect Mic into Mic 1 or Mic 2 jack. Then the  
karaoke mode is transferred to ON mode.  
- To disconnect the Mic makes the karaoke mode  
transfer to OFF mode automatically.  
2
3
Press the KARAOKE button on the remote control.  
Select the Requestusing the  
or  
buttons,  
then press OK button.  
This function operates only in DVD, VCD, and CD  
DISC.  
This function cannot operate according to the disc  
type.  
4
5
Input the number (Track No.) of the desired song  
into the flickering part(--).  
- You can reserve up to 10 songs.  
When you want the next reserved song during  
Keycon Request  
playing a song, press the l button.  
Keycon Request  
Key Control  
Request  
1
2
3
Press the KARAOKE button.  
~
CLEAR  
Select the Keyconusing the  
or  
buttons.  
By use of the  
tone.  
or  
buttons, change to the desired  
-
-
-
: To let 7 scales down by half scale.  
: Original scale.  
: To let 7 scales up by half scale.  
#
This function operates only in DVD, VCD, and CD  
DISC.  
This function cannot operate according to the disc  
type.  
Keycon Request  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-42  
Cancellation of reservation  
Score Function  
1
Cancel by pressing the CLEAR button of the  
remote.  
Press KARAOKE button twice to turn the Score Mode  
On.  
- The last reserved song will be erased first.  
Score will pop up whenever a song is completed.  
2
3
Continuous pressing of the CLEAR button can  
cancel the next reserved song.  
If the reservation is required again, input the song  
number in the flickering part.  
Types of Karaoke disc  
Request function is available only when the  
Karaoke mode is ON.  
When using lbutton, it can not work at the  
last song.  
When using Request function, the REPEAT”  
function does not work.  
DVD Karaoke Disc  
Karaoke  
Channel  
5CH. DVD  
2CH. DVD  
-Channel  
1 CH  
2 CH  
3 CH  
4 CH  
5 CH  
L
R
M
V1  
V2  
Left stereo music Left stereo music + Vocal  
Right stereo music Right stereo music + Vocal  
Guide melody  
Vocal track  
Vocal track  
-
-
-
Vocal Fader  
CVD, VCD Karaoke Disc  
Karaoke  
Channel  
CVD  
VCD, CD  
Pressing the KARAOKE button twice displays the  
following in Karaoke ON mode:  
-Channel  
1 CH CH1 LEFT Left stereo music+Vocal  
Left stereo music  
1 CH CH1 RIGHT Right stereo music+Vocal Right stereo music + Vocal  
- This function can provide the only melody without  
specific vocal sound when playing a Karaoke disc.  
2 CH CH2 LEFT  
2 CH CH2 RIGHT  
Left stereo music  
Right stereo music  
-
-
VOCAL FADER  
Remark  
* It cannot be done as above picture in accordance  
with the disc type.  
V1  
V2  
V1 V2  
OFF  
CH1. Vocal Cancel  
CH2. Vocal Cancel  
CH1, CH2. Vocal Cancel  
Vocal Fader Off  
CAUTIONS: Make sure to turn the KARAOKE MODE  
to OFF to play a movie disc or play in a  
general mode. If you play a movie disc  
with the KARAOKE ON , a score will  
show up every time when a chapter is  
over.  
- In VCD, CVD or CD, you can select only the L, R,  
OFF.  
Vocal Fader  
Guide Melody  
Score  
: Off  
: Off  
: On  
Guide Melody  
To guide melody through xylophone and piano help  
you sing easily.  
This function works only on the DVD Karaoke disc  
on which the guide melody is recorded.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-43  
Technical Specifications  
Rated voltage  
Power consumption  
Weight  
110 - 240V, 50/60Hz  
19 Watts  
3.8 Kg  
General  
Input  
Size  
430mm X 282mm X 82mm  
+5°C ~ +35°C  
Operating ambient temperature  
Installation conditions  
Operation position : Horizontal,  
Relative humidity : Below 75%  
A/V jack : 1.0Vp-p (unbalanced) 75  
A/V jack : -8dBm, 47Kohm unbalanced  
2 Mic Input  
Video input (Rear)  
Audio input (Rear)  
Mic (front)  
RF out  
UHF 21-69 (Initial CH36)  
A/V jack  
Audio (DVD, VCR)  
Audio (DVD only)  
Video (DVD, VCR)  
Video (DVD only)  
Output  
Digital audio out (OPTICAL, COAXIAL)  
A/V jack  
S-Video out  
COMPONENT out : A/V jack  
VHS type video tape,  
Tape format  
S-VHS type video tape (Playback only)  
PAL, MESECAM, NT 3.58, NTSC4.43, NTSC playback on PAL TV  
B/G, D/K  
Color system  
Tuning system  
Video S/N  
VCR  
Above 43dB (standard recording)  
Above 240 lines (standard recording)  
Above 68dB (Hi-Fi), 39dB (Mono)  
20Hz - 20KHz (Hi-Fi)  
Resolution  
Audio S/N  
Audio frequency characteristics  
Disc  
DVD, CD (12cm), CD (8cm), VIDEO-CD (12cm)  
95dB  
DVD  
Audio S/N  
Audio dynamic range  
105dB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-44  
Problems and Solutions (VCR)  
Before contacting the Samsung after-sales service, perform the following simple checks.  
Problem  
Explanation/Solution  
No power  
Check that the power plug is connected to a wall outlet.  
Have you pressed the STANDBY/ON button?  
You cannot insert a video cassette  
A video cassette can only be inserted with the window  
side up and the safety tab facing you.  
The television programme was not recorded  
Check the DVD-VCR aerial connections.  
Is the DVD-VCR tuner properly set?  
Check if the safety tab is intact on the cassette.  
Timer recording was unsuccessful  
Was the STANDBY/ON button pressed to activate the timer?  
Re-check the recording start/stop time settings.  
If there was a power failure or interruption during timer  
recording, the recording will have been cancelled.  
No playback picture or the picture  
is distorted  
Check to see if you are using a prerecorded tape.  
You cannot see normal broadcasts  
Check the TUNER/EXTERNAL setting. It should be on  
TUNER.  
Check the TV/VCR aerial connections.  
Noise bars or streaks on playback  
Press the TRK ( or ) buttons to minimize this effect.  
When the  
during playback, the still picture  
button is pressed  
A still picture may have noise bars, depending on the  
condition of the tape. Press the TRK ( or ) buttons  
during SLOW motion to minimize this effect.  
II  
has severe noise barsstreaks  
Video Head Cleaning  
If poor pictures appear on a variety of cassettes, the video  
heads may need cleaning. This is not a common problem  
and unless it appears, the heads should not be cleaned.  
When cleaning the video heads, read all instructions  
provided with the head cleaning cassette. Incorrect head  
cleaning can permanently damage the video heads.  
If when tuning in your TV to the DVD-VCR  
TV does not find the Screen  
1. Remove the aerial input plug from the socket marked (aerial  
symbol) on the rear of the DVD-VCR.  
or the pattern when found suffers  
from interference, it may be due to the  
DVD-VCR output channel clashing with  
the normal TV transmissions in your area.  
To prevent this you will need to change the  
DVD-VCR output channel in the following  
way  
2. Carry out the instructions Tuning Your Television for the DVD-  
VCR(see page 8).  
3. Carry out the instructions Setting the DVD-VCR output  
Channel(see page 14), move the channel number  
several channels down from the original setting.  
(example: from 36 to 37).  
4. Replace the aerial plug into the socket marked (aerial symbol)  
on the rear of the DVD-VCR.  
5. Re-tune your TV to the DVD-VCR again by following  
instructions Tuning Your Television for the DVD-VCR”  
(page 8).  
6. If the problem still exists repeat steps 1 to 5 moving several  
more channels away from the original setting.  
If you are unable to solve the problem after reading the above instructions, note:  
The model and serial number on the rear of your DVD-VCR  
The warranty information  
A clear description of the problem  
Then contact your nearest SAMSUNG after-sales service.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-45  
Troubleshooting Guide (DVD)  
Before requesting service (troubleshooting)  
Problem  
Action  
Page  
Ensure that the disc is installed with the label side facing up.  
Check the region number of the DVD.  
This player cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD, a  
VIDEO-CD or a CD.  
Disc does not play.  
P4  
5.1 channel sound is reproduced only when the following conditions are  
met. :  
1) The DVD-VCR player is connected with the proper amplifier  
2) The disc is recorded with 5.1 channel sound.  
Check whether the disc being played has the Dolby 5.1 chmark on  
the outside.  
5.1 channel sound is not  
being reproduced.  
P27  
Check if your audio system is connected and working properly.  
The features or action cannot be completed at this time because:  
1. The DVDs software restricts it.  
2. The DVDs software doesnt support the feature (e.g., angles).  
3. The feature is not available at the moment.  
4. Youve requested a title or chapter number or search time that is out of  
range.  
The  
screen.  
icon appears on  
P30-43  
Some of the functions selected in the Setup Menu may not work  
properly if the disc is not encoded with the corresponding function.  
Playback mode differs from  
the Setup Menu selection.  
P25-29  
P28  
The screen ratio cannot be  
changed.  
The Screen Ratio is fixed on your DVDs.  
Make sure you have selected the correct Digital Output in the Audio  
Options Menu.  
No audio.  
P27  
Press STANDBY/ON from a cold start with no disc in the unit. Press the  
➛➛ and buttons simultaneously on the front panel for five seconds.  
Switch off and on the DVD-VCR by pressing STANDBY/ON button. The  
Parental Mode is now unlocked as indicated on the display. You can now  
set your rating level and change your password to a new number.  
Forgot password  
Go to the contents and find the section of the instruction book that  
contains the explanations regarding the current problem, and follow the  
procedure once again.  
If you experience other  
problems.  
If the problem still cannot be solved, please contact your nearest  
authorized service center.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-46  
Schematic Diagrams  
1
S.M.P.S.  
Power Drive  
Display/Function  
System Control/Servo  
A/V  
Hi-Fi  
A2/NICAM  
TM (China/Hong Kong Only)  
TM  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
2
3
4
5
6
7
8
9
10 Input-Output  
11 Karaoke  
12 DVD AV Decoder  
13 DVD Servo  
14 DVD Audio/Video  
NOTE  
For schematic Diagram  
- Resistors are in ohms, 1/8W unless otherwise noted.  
Special note :  
Most semiconductor devices are electrostatically sensitive and therefore require the  
special handling techniques described under the “electrostatically sensitive (ES)  
devices” section of this service manual.  
Note :  
Do not use the part number shown on this drawing for ordering. The correct part  
number is shown in the parts list (may be slightly different or amended since this  
drawing was prepared).  
Important safety notices :  
Components identified with the mark  
have the special characteristics for safety.  
When replacing any of these components. Use only the same type.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-47  
Block Identification of Main PCB  
<Component Side>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENG-62  
MEMO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
THIS APPLIANCE IS DISTRIBUTED BY  
ELECTRONICS  
AK68-00374T  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ricoh Fax Machine 1900L User Guide
Roland Network Router DP90S User Guide
Ryobi Saw CSB142LZ User Guide
Samsung Computer Drive 100737108 A User Guide
Samsung Copier SCX 6545N User Guide
Samsung Projection Television HL S6167W, HL S6767W User Guide
Samsung Washer Q1044C S V User Guide
Sanus Systems Indoor Furnishings PFAV30 User Guide
Sanyo Air Conditioner 42XLS32A User Guide
Sanyo Air Conditioner C1852 User Guide