DVD Player
DVD-HD748
AK68-00517C
Download from Www.Somanuals.com. All Manuals Search And Download.
General Features
Disc Type and Characteristics
Excellent Sound
MPEG4
This DVD player is capable of playing the following types of discs with the corresponding logos:
Dolby Digital, a technology developed by Dolby
Laboratories, provides crystal clear sound
reproduction.
This unit can play MPEG4 formats within an avi file.
Recording Types Disc Size Max. Playing Time
Characteristics
Disc Types (Logos)
DVD AUDIO
DVD AUDIO is a format specifically designed to
provide the highest possible audio fidelity capable
on DVD.
• DVD contains excellent sound and
video due to Dolby Digital and
MPEG-2 system.
Single-sided 240 min.
DVD-VIDEO
12 Cm
Double-sided 480 min.
Audio
+
Screen
Video with MPEG-2 compression technology.
Both regular and widescreen(16:9) pictures can be
viewed.
• Various screen and audio functions
can be easily selected through the
on-screen menu.
Single-sided 80 min.
Video
DVI (Digital Visual Interface)
DVI reduces picture noise by allowing a pure digital
video signal path from the player to your TV.
8 Cm
Double-sided 160 min.
Slow Motion
An important scene can be viewed in slow motion.
VIDEO-CD
AUDIO-CD
74 min.
20 min.
12 Cm
8 Cm
Audio
+
Video
• Video with CD sound, VHS
quality & MPEG-1 compression
technology.
Note
* Discs which cannot be played with this player.
Programmed Play (CD)
You can program tracks to play in desired order.
• DVD-ROM
• CD-ROM
• CDI
• DVD-RAM
• CDV
• CVD
Parental Control (DVD)
• CD is recorded as a Digital Signal
with better audio quality, less
distortion and less deterioration of
audio quality over time.
74 min.
20 min.
12 Cm
8 Cm
• CDGs play audio only, not graphics.
The parental control allows users to set the level
necessary to prohibit children from viewing harmful
movies such as those with violence, adult subject
matter, etc.
Audio
* Ability to play back may depend on recording
conditions.
• DVD-R, +R
• CD-RW
• DVD AUDIO is a format specifically
designed to provide the highest
possible audio fidelity capable on
DVD.
DVD AUDIO
SACD
• DVD+RW, -RW
Audio
+
Video
Various On-Screen Menu Functions
You can select various languages (Audio/Subtitle)
and screen angles while enjoying movies.
400 min.
74 min.
12 Cm
12 Cm
* The unit may not play certain CD-R, CD-RW and
DVD-R due to the disc type or recording
conditions.
EZ VIEW (DVD)
Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
•
SACD is a high quality audio format with
higher sampling rates and fuller, richer
sound as compared to regular CD.
Audio
COPY PROTECTION
Many DVD discs are encoded with copy
protection. Because of this, you should only
connect your DVD player directly to your TV, not
to a VCR. Connecting to a VCR results in a
distorted picture from copy-protected DVD
discs.
Digital Photo Viewer (JPEG)
Disc Markings
Play Region Number
You can view Digital Photos on your TV.
Both the DVD player and the discs are coded by region.
These regional codes must match in order for the disc to
play. If the codes do not match, the disc will not play.
Repeat
~
Play Region Number
You can repeat a song or movie simply by pressing
the REPEAT button.
PAL broadcast system in U.K, France,
Germany, etc.
The Region Number for this player is described on the
rear panel of the player.
PAL
This product incorporates copyright protection
technology that is protected by methods claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise
MP3/WMA
This unit can play discs created from MP3/WMA
files.
Dolby Digital disc
Stereo disc
DivX Certification
STEREO
Instant Replay (DVD)
This function is used to replay the previous
10 seconds of a movie from the current position.
DivX, DivX Certified, and
associated logos are
trademarks of DivXNetworks, Inc and
are used under license.
DIGITAL
SOUND
Digital Audio disc
authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
DTS disc
Instant Skip (DVD)
This function skips playback ahead 10 seconds.
MP3 disc
SACD (Super Audio CD)
SACD is a high quality audio format with higher
sampling rates and fuller, richer sound as compared
to regular CD.
SACD disc
DVD AUDIO disc
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-4
ENG-5
Description-Front Panel
Description-Rear Panel
1
7
6
7
5
Pr
Pb
Y
STANDBY
R
R
RAER
L
SUBWOOFER
CENTER
COAXIAL
R
COMPONENT OUT
DVI OUT
OPTICAL
FRONT
L
L
AUDIO
VIDEO
S-VIDEO
5.1CH ANALOG AUDIO OUT
OUT
1
2
3
4
8
Front Panel Controls
5
6
1
2
3
4
1. STANDBY/ON (
)
5. STOP (
)
• When the unit is first plugged in, the red indicator
lights. When STANDBY/ON button is pressed on,
the blue light appears and the player is turned
on.
Rear Panel
1. DIGITAL AUDIO OUT JACKS
• Use an optical or coaxial digital cable to connect
to a compatible Dolby Digital receiver.
• Stops disc play.
6. SKIP (
) / SEARCH
7. COMPONENT OUT JACKS
• Use to reverse skip a scene or music.
• Use these jacks if you have a TV with
Component Video in jacks. These jacks provide
Pr, Pb and Y video.
• If Component (P-SCAN) & DVI Video Output is
selected in Setup Menu, interlaced scan mode
and Video, S-Video will not work.
• If Component (I-SCAN) Video Output is selected
in Setup Menu, progressive scan and DVI mode
will not work.
7. PLAY/PAUSE (
• Begin or pause disc play.
)
2. DISC TRAY
• Place the disc here.
Use to connect to an A/V Amplifier that contains
a Dolby Digital, MPEG-2 or DTS decoder.
8. SKIP (
) / SEARCH
3. OPEN/CLOSE (
)
2. 5.1CH ANALOG AUDIO OUT JACKS
• Connect to an amplifier with 5.1ch analog input
jacks.
• Use to forward skip a scene or music.
• Press to open and close the disc tray.
4. DISPLAY
• Operation indicators are displayed here.
3. AUDIO OUT JACKS
• Connect to the Audio input jacks of your
television, audio/video receiver.
Important Note
Display Indicators
4. VIDEO OUT JACK
• Use a video cable to connect to the Video input
jack on your television.
• The Video Output in Setup Menu must be set to
Component (I-SCAN) or S-Video.
• Consult your TV User’s Manual to find out if your
TV supports Progressive Scan. If Progressive
Scan is supported, follow the TV User’s Manual’s
instructions regarding Progressive Scan settings in
the TV’s menu system.
1
5. S-VIDEO OUT JACK
• If Component(P-SCAN) & DVI Video Output is
selected in Setup Menu, Video and S-Video will
not work.
• Use the S-Video cable to connect this jack to
the S-Video jack on your television for a higher
quality picture.
• The Video Output in Setup Menu must be set to
S-Video.
• See page 35 to get more information on how to
use the setup menu.
3
2
Front Panel Display
6. DVI OUT JACK
1. Disc type indicators
2. Play / Pause / Forward play
• Use the DVI cable to connect this jack to the
DVI jack on your television for the best quality
picture.
• The Video Output in Setup Menu must be set to
Component (P-SCAN) & DVI.
3. Displays various messages concerning operations such as PLAY, STOP, LOAD ...
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc information.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-6
ENG-7
Tour of the Remote Control
Choosing a Connection
This remote control can also control most TVs. See page 38.
8. SEARCH Buttons (
/
)
The following shows examples of connections commonly used to connect the DVD player with a TV
and other components.
DVD POWER
TV POWER
• Allow you to search forward/backward through a disc.
1
18
9. STOP Button (
10. MENU Button
)
Before Connecting the DVD Player
• Brings up the DVD player’s menu.
2
3
11. RETURN Button
• Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
• Returns to a previous menu.
• If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
12. ZOOM Button
• Enlarges DVD picture.
19
20
PROG
CLEAR
• Refer to the owner’s manual of the additional components you are connecting for more information on those
particular components.
INSTANT
CH
13. AUDIO Button
STEP
REPLAY
SKIP
4
5
21
22
23
•
Use this button to access various audio functions on a disc.
VOL
TV/VIDEO
OPEN/CLOSE
14. SUBTITLE Button
Connection to an Audio System
6
15. INDEX Buttons
• Use to skip the INDEX.
VIDEO SEL.
DVI SEL.
7
8
24
16. SACD/CD Button
• Selects SACD or CD playback mode.
Method 1
Method 2
Method 3
17. SHUTTLE DIAL (Search mode)
25
26
27
• Performs fast motion play.
9
10
18. TV POWER button
• Turns the TV’s power on or off.
28
AUDIO
SYSTEM
11
19. CLEAR Button
•
Use to remove menus or status displays from the screen.
29
20. INSTANT SKIP Button
• This function skips playback ahead 10 seconds.
5.1ch Analog Amplifier
Audio Input Jacks
2ch Amplifier
Dolby Digital Decoder
Digital Audio Input Jack
ZOOM
EZ VIEW
REPEAT
21. INSTANT REPLAY Button
12
13
14
30
31
32
Audio Input Jacks
• This function is used to replay the previous 10
seconds of a movie from the current position.
SUBTITLE
AUDIO
NEXT
ANGLE
PRE.
22. CH
/
buttons
• Channel selection.
INDEX
PAGE
PRE.
NEXT
33
34
23. OPEN/CLOSE (
) Button
15
16
SACD/CD
BOOKMARK
• To open and close the disc tray.
24. DVI SEL. Button
• DVI Output resolution setup.
25. SKIP Buttons (
/
)
• Use to skip the title, chapter, or track.
OR
35
17
26. PLAY/PAUSE Button (
• Begin/Pause disc play.
)
27. INFO Button
• Displays the current disc mode.
DVD
Player
28. DISC MENU Button
• Brings up the Disc menu.
29. ENTER/DIRECTION Button
DVD Function Buttons
1. DVD POWER Button
(UP/DOWN or LEFT/RIGHT Buttons)
• This button functions as a toggle switch.
Audio Output Jaks
(2 Channel)
5.1CH Analog Audio Output Jacks
(Multi Channel)
Digital Audio Output Jack
• Turns the power on or off.
2. NUMBER Buttons
3. PROG Button
30. EZ VIEW Button
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
31. ANGLE Button
• Use to access various camera angles on a DVD.
• Allows you to program a specific order.
4. STEP Button
• Advances play one frame at a time.
Note
32. REPEAT Button
• Allows you to repeat play a title, chapter, track, or disc.
• DVD-AUDIO only plays back two channel audio through the Digital Audio out. Multi-channel DVD-Audio discs
are output through the Analog outputs.
• SACD plays back only through the Analog outputs. (See page 32~33)
5. VOL +/- Buttons
• Control volumes.
33. PAGE Buttons
• Use to skip the PAGE.
6. TV/VIDEO Button
• Press to display all of the available video sources
( i.e., TV, Cable, Video)
34. BOOKMARK Button
35. JOG DIAL (Step mode)
• Operates frame by frame play. In CD mode, performs
track search.
7. VIDEO SEL. Button
• Selects Video output format.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-8
ENG-9
Choosing a Connection
Choosing a Connection
Connection to a TV (For Video)
Connection to a TV (For Progressive scan, Digital Video)
TV (Normal, Widescreen, Projection, etc..)
Method 1
Method 2
S-Video
Method 3
Method 2
Method 1
Basic Audio
Video
Interlace scan
Digital Video
DVI Audio Input
Progressive scan
Basic Audio
TV
TV
S-Video
Cable
AV
Cable
Video
Cables
OR
OR
DVD
Player
DVD
Player
Component Jacks
Digital Video Out
Audio Output Jacks
Audio Output Jacks
Component Jacks
Audio Output
Jacks
Video Output
Jack
S-Video Jack
Method 1
1. Connect a cable with the desired method.
2. Turn on your TV and DVD Player.
3. Set your TV the correct video input by pressing TV/VIDEO button on. (See page 38)
4. Select the video output according to the cable connection.
DVD Player + TV with Component Video Jacks.
(The Video Output in Setup Menu must be set to Component (P-SCAN) & DVI.)
Method 2
If you use the VIDEO SEL. button, you can change easily video output in no disc mode.
DVD Player + TV with DVI Jack.
• Depending on your TV, your hookup for Method 2 may differ from the illustration.
(The Video Output in Setup Menu must be set to Component (P-SCAN) & DVI.)
Method 1
DVD Player + TV with Video Input Jack
(The Video Output in Setup Menu must be set to S-Video or Component (I-SCAN).)
Method 2
Important Note
DVD Player + TV with S-Video Input Jack
(The Video Output in Setup Menu must be set to S-Video.)
• Consult your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan
settings in the TV’s menu system.
• When the Video output is Progressive Scan, Video and S-Video will not work.
• If you want to convert Video Output to Progressive Scan, select Component (P-SCAN)& DVI in SETUP menu
and then select "Yes" within 10 seconds. Finally change the TV's external input to Component(576p/480p).
(See Page 35)
Method 3
DVD Player + TV with Component Video Jacks
(The Video Output in Setup Menu must be set to Component (I-SCAN).)
Note
• Use the VIDEO SEL. button to easily change the video output in no disc mode. (See page 10)
• Refer to your TV user's manual.
• If you press the VIDEO SEL. button, Video output mode is changed in regular sequence in no disc mode.
(S-Video ➝ I-SCAN ➝ P-SCAN & DVI )
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-10
ENG-11
Choosing a Connection
Playing a Disc
7. Step Motion Play
DVI VIDEO Specifications
Before Play
(Except CD/DVD-AUDIO/SACD)
Turn the Jog dial clockwise or press the STEP button on
the remote during play.
- Each time the button is pressed or Jog Dial is turned, a
new frame will appear.
• Turn on your TV and set it to the correct Video
Input by pressing TV/VIDEO button on the TV
remote control.
• If you connected an external Audio System, turn
on your Audio System and set it to the correct
Audio Input.
When you press the DVI SEL. button, in case of PAL TV system in setup menu 576p, 720p, 768p, 1080i ; [50Hz]
are selected in order.
When you press the DVI SEL. button, in case of NTSC TV system in setup menu 480p, 720p, 768p, 1080i ;
[60Hz] are selected in order.
The first press of the DVI SEL. button, brings up the current resolution.
The second press allows you to change the DVI output resolution.
* The specific resolution of DVI output may not work depending on your TV.
* Refer to the TV users manual.
- No sound is heard during STEP mode.
- Press PLAY/PAUSE (
play.
) button to resume normal
After plugging in the player, the first time you press
the DVD POWER button, this screen comes up :
If you want to select a language, press a
NUMBER button. (This screen will only appear
when you plug in the player for the first time.)
If the language for the startup screen is not set,
the settings may change whenever you turn the
power on or off. Therefore, make sure that you
select the language you want to use.
- You can only perform step motion play in the forward
direction.
Important Note
• DVI (Digital Visual Interface)
DVI is an interface to enable the digital transmission of video signals between various digital devices.
Using DVI, the DVD player transmits a digital video signal and displays a vivid picture on a TV having a DVI
jack.
• Description of the DVI connection
DVI-D connector : digital signal only.
DVI-I connector : digital and analog signal.
8. Slow Motion Play
(Except CD/DVD-AUDIO/SACD)
Press the FWD SEARCH (
) button on the remote
during PAUSE or STEP mode.
- By pressing the FWD SEARCH (
) button, you can
select slow motion play for 1/8, 1/4 or 1/2 of normal
speed.
- No sound is heard during slow mode.
- Press PLAY/PAUSE (
) to resume normal play.
• Though the player uses a DVI-I cable, the player outputs only a pure digital signal to the TV.
• If TV does not support HDCP (High-bandwidth Digital content protection), snow noise or blue screen appears
on the screen.
- Reverse slow motion play will not work.
RESUME function
When you stop disc play, the player remembers
where you stopped, so when you press
• Be careful that various connectors are similar to DVI connector, for example VESA PnD, VESA DFD and so on.
• Why does Samsung use DVI?
Analog TVs require an analog video signal. However, when playing a DVD, the data transmitted to a TV is
digital. Therefore either a digital-to-analog converter(in the dvd player) or an analog-to-digital converter (in the
TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss.
DVI technology is superior because it requires no D/A conversion and is a pure digital signal from the player to
your TV.
PLAY/PAUSE (
) button again, it will pick up
where you left off. (unless the disc is removed or the
player is unplugged, or if you press the STOP (
button twice.)
)
Play
• What is the HDCP?
1. Press the OPEN/CLOSE button.
The STANDBY indicator light goes out and the tray
opens.
HDCP(High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted via DVI
from being copied. It provides a secure digital link between a video source(PC, DVD. etc) and a display
device(TV, projector . etc). Content is encrypted at the source device to prevent unauthorized copies from
being made.
Note
• If the player is left for about 5 minutes in pause
mode, it will stop.
2. Place a disc gently into the tray with the disc’s
label facing up.
• If the player is left in the stop mode for more than
about 30 minutes, the power will automatically
shut off. (Automatic Power-Off Function)
3. Press the PLAY/PAUSE (
OPEN/CLOSE button to close the disc tray.
) button or
PROGRESSIVE SCAN OUTPUT (525p/625p)
• If the player is left in the stop mode for more than
one minute without any user interaction, a screen
saver will be activated. Press the PLAY/PAUSE
“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE
DISPLAYED IN THE PICTURE, IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO
THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR
TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.”
4. Stopping Play
Press the STOP (
) button during play.
(
) button to resume normal play.
• This
icon indicates an invalid button press.
5. Removing Disc
Press the OPEN/CLOSE button.
6. Pausing Play
Press the PLAY/PAUSE (
remote during play.
) or STEP button on the
- Screen stops, no sound.
- To resume, press the PLAY/PAUSE (
again.
) button once
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-12
ENG-13
Using the Search & Skip Functions
Using the Display Function
Using the Display Function
Using the Disc and Title Menu
To access the desired title when there is
During play, you can search quickly through a
chapter or track or use the skip function to
jump to the next selection.
When Playing a DVD/VCD/CD
1. During play, press the INFO button on the
remote.
Using the Disc Menu
more than one in the disc.
For example, if there is more than one
movie on a DVD, each movie will be
identified.
Title
1. During the playback of a DVD disc, press the
MENU button on the remote.
2. Use the UP/DOWN buttons to select the desired
item.
2. Select Disc Menu using the UP/DOWN buttons,
then press the RIGHT or ENTER button.
Searching through a Chapter or Track
During play, press the SERACH (
button and press again to search at a faster speed.
• You can also use the Shuttle dial on the remote by
turning. (2X, 4X, 8X, 16X, 32X, 128X)
or
)
Most DVD discs are recorded in
chapters so that you can quickly find a
specific passage (similar to tracks on an
audio CD).
3. Use the LEFT/RIGHT buttons to make the
desired setup and then press ENTER.
• You may use the number buttons of the remote
control to directly access a title, chapter or to
start the playback from the desired time.
Chapter
• In case of SACD, when the clips menu is off, you can use
Allows playback of the film from a
desired time. You must enter the starting
time as a reference.
this function. (See page 23)
4. To make the screen disappear, press the INFO
button again.
Time
Audio
DVD
VCD
2X, 8X, 32X, 128X
4X, 8X
Refers to the language of the film
soundtrack. In the example, the
soundtrack is played in English 5.1CH.
A DVD disc can have up to eight
different soundtracks.
DVD
CD/SACD/DVD-AUDIO 2X, 4X, 8X
DVD
Using the Title Menu
01
Title
02
1. During the playback of a DVD disc, press the
MENU button on the remote.
Chapter
0:00:13
Time
ENG 5.1CH
Audio
Skipping Tracks
2. Select Title Menu using the UP/DOWN buttons,
then press the RIGHT or ENTER button.
Off
Refers to the subtitle languages
available in the disc.
You will be able to choose the subtitle
languages or, if you prefer, turn them off
from the screen.
Subtitle
During play, press the
• When playing a DVD if you press the
moves to the next chapter. If you press the
moves to the beginning of the chapter. One more press
makes it move to the beginning of the previous chapter.
or
button.
button, it
button, it
Subtitle
A DVD disc can have up to 32 different
subtitles.
VCD
• When playing a VCD 2.0 in Menu Off mode, a VCD 1.1,
VCD
SACD/ DVD-AUDIO or a CD, if you press the
it moves to the next track. If you press the
moves to the
button,
button, it
01
Track
0:00:48
Time
beginning of the track. One more press makes it move to
the beginning of the previous track.
Note
• When VCD 2.0 is in Menu Off mode only, this
function works. (See page 14)
• If a track exceeds 15 minutes when playing a VCD and
you press the
button, it moves forward 5 minutes, in
menu off mode. If you press the
backward 5 minutes.
button, it moves
Note
CD
• Depending on a disc, the Title and Disc Menus
may not work.
CD
01
• Title Menu will only be displayed if there are at
least two titles in the disc.
Track
0:00:48
Time
Note
• You can also use the Disc Menu, using the DISC
MENU button on the remote.
• When playing a VCD 2.0, you can choose Menu
On or Menu Off by using the DISC MENU
button.
• In VCD 2.0, the DISC MENU button is used to
select Menu On or Menu Off mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-14
ENG-15
Using the Function Menu
Repeat Play
Slow Repeat Play
Program Play & Random Play
Using the Function Menu
Repeat the current track, chapter, title, a
chosen section (A-B), or all of the disc.
This feature allows you to slowly repeat
scenes containing sports, dancing, musical
instruments being played etc. so you can
study them more closely.
Program Play (CD)
1. Press the MENU button during playback.
1. Press the PROG button.
2. Use the UP/DOWN buttons to highlight Function,
then press the RIGHT or ENTER button.
2. Use the LEFT/RIGHT buttons to select
PROGRAM. Press the ENTER button.
1. Press the REPEAT button on the remote.
Repeat screen appears.
When playing a DVD/VCD
3. Use the LEFT/RIGHT/UP/DOWN buttons to
select the first track to add to the program.
Press the ENTER button. The selection numbers
appear in the Program Order box.
3. Function selection screen appears: Info, Zoom,
Bookmark, Repeat and EZ View.
2. Select Chapter, Title or A-B using the
LEFT/RIGHT buttons.
1. During play, press the PLAY/PAUSE (
button.
)
-
-
-
-
-
Info (See Page 14~15)
Zoom (See Page 22)
Bookmark (See Page 21)
Repeat (See Page 16)
EZ View (See Page 18)
• Chapter (
) : repeats the chapter that is playing.
2. Press the FWD SEARCH (
) button on the
• Title ( T ) : repeats the title that is playing.
• A-B : repeats a segment of the disc that you select.
4. Press the PLAY/PAUSE (
The disc will be played in programmed order.
) button.
remote during PAUSE or STEP mode.
* A-B REPEAT
• Press ENTER at the point where you want the repeat
play to start (A).
• Press ENTER at the point where you want the repeat
play to stop (B).
• To terminate the function, press the 'CLEAR' button.
• A-B REPEAT does not allow you to set point (B) until at
least 5 seconds has elapsed after point (A) has been
set.
3. Press the REPEAT button on the remote.
Repeat screen appears.
PROGRAM
RANDOM
4. Use the UP/DOWN button to highlight one of the
5 functions. Then press the RIGHT or ENTER
button to access the function.
4. Select A-B using the LEFT/RIGHT buttons.
5. Press ENTER at the point where you want the
repeat play to start (A).
• A-B REPEAT does not allow you to set point (B) until at
least 5 seconds has elapsed after point (A) has been
set.
PROGRAM 01
Track
Program Order
- - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
01 02 03 04
05 06 07 08
09 10 11 12
13 14 15 16
DVD
6. Press ENTER at the point where you want repeat
play to stop (B).
REPEAT ENTER
Off
01
01 A - B
T
7. To return to normal play, press the CLEAR button
CLEAR
and then press the PLAY/PAUSE (
) button.
VCD/CD
Note
Random Play (CD)
REPEAT ENTER
Off
T
01
D
01 A - B
• The disc will play from A to B repeatedly at the
speed you chose.
Note
1. Press the PROG button.
• You can also directly select these functions using
their respective buttons on the remote.
2. Use the LEFT/RIGHT buttons to select RANDOM.
Press the ENTER button.
• When VCD 2.0 is in Menu Off mode only, this
function works. (See page 14)
PROGRAM
RANDOM
3. Press ENTER.
4. To return to normal play, press REPEAT again,
then press the LEFT/RIGHT buttons to select Off
and press ENTER.
Note
• Depending on a disc, the Program and Random
Play functions may not work.
Note
• DVD repeats play by chapter or title, CD and VCD
repeat play by disc or track.
• This unit can support a maximum of 20
programmed tracks.
• Depending on a disc, the Repeat function may not
work.
• While in playback mode, press the CLEAR button
on the remote control to cancel Programmed Play
or Random Play.
• When VCD 2.0 is in Menu Off mode only, this
function works. (See page 14)
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-16
ENG-17
Adjusting the Aspect Ratio (EZ View)
Selecting the Audio Language
Selecting the Subtitle Language
To play back using aspect ratio (DVD)
Press the EZ VIEW button.
If you are using a 4:3 TV
You can select a desired audio quickly and
easily with the AUDIO button.
You can select a desired subtitle quickly and
easily with the SUBTITLE button.
1. For 16:9 aspect ratio discs
• The screen size changes when the button is
pressed repeatedly.
• The screen zoom mode operates differently
depending on a screen setting in the initial setup
menu.
• To ensure correct operation of the EZ VIEW
button, you should set the correct aspect ratio in
the initial setup (See page 34).
• 4:3 Letter Box
Using the AUDIO button
Using the SUBTITLE button
Displays the content of the DVD title in 16:9
aspect ratio. The black bars will appear at the
top and bottom of the screen.
1. Press the AUDIO button.
1. Press the SUBTITLE button.
- The subtitle languages are represented by
abbreviations.
2. The Audio changes when the button is pressed
repeatedly.
The audio languages are represented by abbreviations.
• 4:3 Pan Scan
The left and right of the screen are cut off and
displays the central portion of the 16:9 screen.
2. The subtitle changes when the button is pressed
repeatedly.
DVD
• Screen Fit
The top and bottom of the screen are cut off
and the full screen appears.
The picture will look vertically stretched.
DVD
If you are using a 16:9 TV
1. For 16:9 aspect ratio discs
AUDIO
ENG DOLBY DIGITAL 5.1CH
SUBTITLE
Off
•
Wide Screen
Displays the content of the DVD title in 16:9
aspect ratio.
• Zoom Fit
The top, bottom, left and right of the screen are
cut off and the central portion of the screen is
enlarged.
- In case of a VCD or CD, you can select among Stereo,
Right or Left.
• Screen Fit
- Use the LEFT/RIGHT buttons to select the desired
subtitle language on a MPEG4 then press the ENTER.
The top and bottom of the screen are cut off.
When playing a 2.35:1 aspect ratio disc, the
black bars at the top and bottom of the screen
will disappear. The picture will look vertically
stretched. (Depending on a type of disc, the
black bars may not disappear completely.)
VCD/CD
2. For 4:3 aspect ratio discs
MPEG4
• Normal Screen
Displays the content of the DVD title in 4:3
aspect ratio.
AUDIO
Stereo
None
• Screen Fit
The top and bottom of the screen are cut off
and the full screen appears.
The picture would look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are
cut off and the central portion of the screen is
enlarged.
- Use the LEFT/RIGHT buttons to select the desired
Audio on a MPEG4 then press the ENTER.
• Zoom Fit
3. To remove the SUBTITLE icon, press the CLEAR
or RETURN button.
MPEG4
The top, bottom, left and right of the screen are
cut off and the central portion of the screen is
enlarged.
2. For 4:3 aspect ratio discs
MP3 1/8
• Normal Wide
Displays the content of the DVD title in 16:9
aspect ratio. The picture will look horizontally
stretched.
• Screen Fit
The top and bottom of the screen are cut off
and the full screen appears.
The picture will look vertically stretched.
Note
Note
• This function depends on what subtitles are
encoded on the disc and may not work.
3. To remove the AUDIO icon, press the CLEAR or
RETURN button.
• This function may behave differently depending on
a type of disc.
• A DVD disc can contain up to 32 subtitle
languages.
• Zoom Fit
The top, bottom, left and right of the screen are
cut off and the central portion of the screen is
enlarged.
• How to have the same subtitle language come
up whenever you play a DVD;
Refer to “Setting Up the Language Features” on
page 32.
Note
• This function depends on what audios are
encoded on the disc and may not work.
• Vertical Fit
• A DVD disc can contain up to 8 audio languages.
When a 4:3 DVD is viewed on a 16:9 TV, black
bars will appear at the left and right of the
screen in order to prevent the picture from
looking horizontally stretched.
• How to have the same audio language come up
whenever you play a DVD;
Refer to “Setting Up the Language Features” on
page 31.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-18
ENG-19
Changing the Camera Angle
Using the Instant Replay/Skip Function
Using the Bookmark Function
When a DVD contains multiple angles of a
particular scene, you can use the ANGLE
function.
Using the Instant Replay function (DVD)
This feature lets you bookmark sections of a
DVD or VCD (Menu Off mode) so you can
quickly find them at a later time.
Recalling a Marked Scene
If you miss a scene, you can see it again using
this function.
1. During play, press the BOOKMARK button on the
remote.
Using the ANGLE button
If you press the INSTANT REPLAY button, the
current scene moves backward about 10 seconds,
and plays back.
Using the Bookmark Function (DVD/VCD)
2. Use the LEFT/RIGHT buttons to select a marked
scene.
If the disc contains multiple angles, the ANGLE
mark appears on the screen.
1. During play, press the BOOKMARK button on the
remote.
3. Press the PLAY/PAUSE (
the marked scene.
) buttons to skip to
* Depending on a disc, the Instant Replay function may not
work.
1. Press the ANGLE button, then ANGLE icon will
appear with the current angle number and the
number of angles available.
2. Use the LEFT/RIGHT buttons to move to the
desired bookmark icon.
3. When you reach the scene you want to mark,
press the ENTER button. The icon will change to
a number (1, 2, or 3).
2. Press the ANGLE button repeatedly to the
desired angle.
3. To remove the ANGLE icon, press the CLEAR or
RETURN button.
4. Press the BOOKMARK button to turn Off the
display.
ANGLE
4/6
Clearing a Bookmark
Using the Instant Skip function (DVD)
1. During play, press the BOOKMARK button on the
remote.
Use this function to skip playback about 10
seconds ahead of the current scene.
2. Use the LEFT/RIGHT buttons to select the
bookmark number you want to delete.
Press the INSTANT SKIP button.
Note
3. Press the CLEAR button to delete a bookmark
number. Press the BOOKMARK button to turn Off
the display.
- Playback will skip ahead 10 seconds.
- Depending on a disc, this function may not work.
• If the disc has only one angle, this feature won’t
work. Currently, very few discs have this feature.
Note
• Up to three scenes may be marked at a time.
• When VCD 2.0 is in Menu Off mode only, this
function works. (See page 14)
• Depending on a disc, the Bookmark function may
not work.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-20
ENG-21
Using the Zoom Function
SACD Playback
SACD Playback
1. Open the disc tray.
Using the Zoom Function (DVD/VCD)
SACD Clips Menu Off Play Function
CD Layer Play Function
1. In Stop mode, press the DISC MENU button until
the Clips menu is off.
During SACD playback, press the SACD/CD button
to playback the CD layer of a dual layer SACD disc.
(Refer to the page 14 for setting CD playback
Function).
2. Place the SACD disc on the tray.
- Place the SACD disc with the labeled side up.
1. During play or pause mode, press the ZOOM
button on the remote.
A Zoom mark will be displayed on screen.
2. During playback, press the INFO button and the
screen below appears.
3. Close the tray.
- The tray closes and you should get a screen
that looks like the one below.
2. Use the UP/DOWN or LEFT/RIGHT buttons to
select the part of the screen you want to zoom in
on.
3. Use the UP/DOWN buttons to select the desired
item.
CD
01
Track
0:00:13
Time
3. Press the ENTER button.
- During DVD play, press ENTER to zoom in
2X/4X/2X/Normal in order.
SACD
SACD
O ff
01
Track
00:00:23
2CH
MULTI
0:00:13
Time
MULTI
Audio
0 0 1 . West Side Story
:
MUSIC
1
- During VCD play, press ENTER to zoom in 2X/Normal
in order.
0 0 2 . West Side Story
0 0 3 . West Side Story
0 0 4 . West Side Story
0 0 5 . West Side Story
0 0 6 . West Side Story
:
:
:
:
:
MUSIC
MUSIC
MUSIC
MUSIC
MUSIC
2
3
4
5
6
West Side Story
:
MUSIC
1
To access the desired Track when there
is more than one in the disc.
INFO
R
E
P
E
AT
REPEAT
I
N
F
O
4. Use the LEFT/RIGHT buttons to make the
desired setup and then press ENTER.
• You may use the number buttons of the remote
control to directly access a track and to start the
playback from the desired time.
Allows playback from a desired time.
You must enter the starting time as a
reference.
SACD Clips Menu On Play Function
1. Use the UP/DOWN buttons to select a music title.
To access the desired Track when there
is more than one in the disc.
2. Press the ENTER button to begin playback of the
music title.
Note
- If you want to use the Repeat Function, press the
REPEAT button to change the mode, such as Off,
Track, Disc.
Allows playback from a desired time by
using the number buttons.
• Some SACD discs do not include a CD layer.
• Depending on a disc, this function may not work.
*Off : Normal Playback
If you want to change the 2channel or
multi channel in play or stop mode,
press AUDIO button.
- You can use this function when SACD
disc includes multi channel and 2
channel audio format.
*Track : Repeats the current music title.
*Disc : Repeats the music titles in the SACD.
- If you want to see information about the Disc title
and Artist, press the INFO button.
- If you want to convert into regular CD mode,
press the SACD/CD button.
- During play or stop mode, you can change the
2CH or MULTI mode by using LEFT/RIGHT
buttons.
• 2CH : L, R
• MULTI : F/L, F/R, R/L, R/R, C/T, S/W
(You can use this function when SACD disc
includes multi channel and 2 channel audio
format.)
5. To make the screen disappear, press the INFO
button again.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-22
ENG-23
DVDAUDIOPlayback
DVD AUDIO Playback
Clips Menu for MP3/WMA/JPEG/MPEG4
1. Open the disc tray.
Most DVD AUDIO discs are recorded in
Group, you can change Groups with this
Function.
REPEAT Play
1. Press the REPEAT button on the remote during
playback.
Discs with MP3/WMA/JPEG/MPEG4 contain
individual songs, pictures or movies that can
be organized into folders as shown below.
They are similar to how you use your
2. Place the DVD AUDIO disc on the tray.
-
Place the DVD AUDIO disc with the labeled side up.
Note
2. Select Title (
LEFT/RIGHT button.
), Group (
) using the
computer to put files into different folders.
* Bonus Group playback.
3. Close the tray.
- The tray closes and disc plays.
• Some DVD AUDIO discs have Bonus
groups. If you want to play a Bonus
group, you must enter the Bonus
Group code. The code is usually on
the DVD AUDIO disc case.
3. Press ENTER.
1. Open the disc tray.
2. Place the disc on the tray.
- Place the disc with the labeled side up.
Using the Display Function
1. During play, press the INFO button on the
remote.
REPEAT ENTER
Off
T
01
01
G
3. Close the tray.
- The tray closes and you should get a screen
that looks like the one below.
To access the desired Track when there is
more than one on the DVD AUDIO disc.
2. Use the UP/DOWN buttons to select the desired
item.
If pages are included with the
DVD-AUDIO, you can see this icon.
To access the desired page, you can
use this Function.
O ff
3. Use the LEFT/RIGHT buttons to make the
desired setup and then press ENTER.
• You may use the number buttons of the remote
control to directly access a Group, Track, Page
or to start the playback from the desired time.
00:00:23
1_mp3
B e c a u s e Yo u
C a c t u s
If a slide show is included with the
DVD-AUDIO, you can see this icon.
In this case you cannot use PAGE
PRE./NEXT buttons.
Sad Day
4. To make the screen disappear, press the INFO
button again.
Wonderful
AUDIO Format Display
During DVD AUDIO playback, press the AUDIO
button to see AUDIO Format information.
If a video zone is included with the
DVD-AUDIO, you can see this icon.
In this case you cannot use PAGE
PRE./NEXT buttons.
DVD AUDIO
01
Group
• LPCM : Linear Pulse Code Modulation.
Not compressed Audio data format.
• PPCM : Packet Pulse Code Modulation.
Lossless compressed Audio data format.
01
Track
Parent Folder, Current Folder Folders and Files in
and Peer Folders Current Folder
01
Page
0:00:13
Time
Allows playback of the music from a
desired time by using the number buttons.
•
•
•
: Name of currently playing file.
: Current Playback Time.
Page, Index Function
1. Use PAGE PRE./NEXT buttons to Skip the Page
when there is more than one in a group.
• Some DVD-AUDIO discs include a slide show.
In the slide show mode, this function can not
use.
: Current Playback Mode : There are 4
modes. They can be selected in order by
pressing the REPEAT button.
Note
Some DVD-AUDIO discs don’t audio down-mixing.
These discs always output 5.1ch analog audio
regardless of audio setup.
- Off : Normal Playback
• PAGE is still images. You can see the still
images when playback DVD-AUDIO disc.
- Track : Repeats the current track.
- Folder : Repeats the current folder.
- Random : Files in the disc will be played
in random order.
2. Use INDEX PRE./NEXT buttons to Skip the Index
when there is more than one in a track.
Note
Some DVD-AUDIO discs don’t allow audio
down-mixing. These discs always output 5.1ch
analog audio regardless of audio setup.
Note Depending on a disc, this function may not work.
Note When you play a MPEG4(AVI) file, refer
to page 27.
•
•
•
: MP3 file icon.
: WMA file icon.
: JPEG file icon.
•
•
•
: AVI file icon.
: Folder icon.
: Current Folder
icon.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-24
ENG-25
Folder Selection
MP3/WMA Playback
MP3/WMA Playback
MPEG4 Playback
1. Open the disc tray.
1. Open the disc tray.
The folder can only be selected in the Stop
mode.
CD-R MP3/WMA discs
When you record MP3 or WMA files on CD-R,
please refer to the following.
2. Place the disc on the tray.
- Place the disc with the labeled side up.
2. Place the disc on the tray.
- Place the disc with the labeled side up.
• To select the Parent Folder
• Your MP3 or WMA files should be ISO 9660 or JOLIET
format.
ISO 9660 format and Joliet MP3 or WMA files are
compatible with Microsoft's DOS and Windows, and with
Apple's Mac. This format is the most widely used.
Press the RETURN button to go to parent folder,
or use the UP/DOWN buttons to select “..” and
press ENTER to go to the parent folder.
3. Close the tray.
- The tray closes and you should get a screen
that looks like the one below.
3. Close the tray.
- The tray closes and you should get a screen
that looks like the one below.
• To select the Peer Folder
MPEG4 Play Function
Use the LEFT/RIGHT buttons to highlight left
window. Use the UP/DOWN buttons to select the
desired folder, then press ENTER.
MP3/WMA Play Function
• When naming your MP3 or WMA files, do not exceed 8
characters, and enter “.mp3, .wma” as the file
extension.
General name format of: Title.mp3. or Title.wma.
When composing your title, make sure that you use 8
characters or less, have no spaces in the name, and
avoid the use of special characters including: (.,/,\,=,+).
AVI files are used to contain the audio and video
data. Only AVI format files with the “.avi” extensions
can be played.
1. Select the desired folder.
2. Use the UP/DOWN or LEFT/RIGHT buttons to
select a song file.
• To select the Sub-Folder
1. Select the desired folder. (See page 26 to select
the folder)
Use the LEFT/RIGHT buttons to highlight right
window. Use the UP/DOWN buttons to select the
desired folder, then press ENTER.
3. Press ENTER to begin playback of the song file.
• Use a decompression transfer rate of at least 128
Kbps when recording MP3 files.
2. Use the UP/DOWN or LEFT/RIGHT buttons to
select an avi file (DivX/XviD) and then press the
ENTER button.
Sound quality with MP3 files basically depends on the rate
of compression/decompression you choose. Getting CD
audio sound requires an analog/digital sampling rate, that
is conversion to MP3 format, of at least 128 Kbps and up
to 160 Kbps. However, choosing higher rates, like 192
Kbps or more, only rarely give better sound quality.
Conversely, files with decompression rates below 128
Kbps will not be played properly.
Root
O ff
WMA
JPEG
00:00:23
MP3
Parent Folder
Wonderful
MUSIC
Current Folder
• Use a decompression transfer rate of at least 64Kbps
when recording WMA files.
1st
Sub-Folders
Sound quality with WMA files basically depends on the
rate of compression/decompression you choose.
Getting CD audio sound requires an analog/digital
sampling rate, that is conversion to WMA format, of at
least 64Kbps and up to 192Kbps.
2nd
Repeat/Random playback
SONG FILE
SONG FILE
1
2
Press the REPEAT button to change playback
mode. There are 4 modes, such as Off, Track,
Folder and Random.
Peer Folders
Repeat Playback
Conversely, files with decompression rates below 64Kbps
or over 192Kbps will not be played properly.
SONG FILE
3
- Off : Normal Playback
Press the REPEAT button to change playback
mode. There are 4 modes, such as Off, Folder, Title
and A-B (a distance between two points appointed
by user).
- Track : Repeats the current song file.
- Folder : Repeats the song files which have the
same extension in the current folder.
- Random : Song files which have the same
extension will be played in random
order.
•
Do not try recording copyright protected MP3 files.
Certain "secured" files are encrypted and code protected
to prevent illegal copying. These files are of the following
types: Windows MediaTM (registered trade mark of
Microsoft Inc) and SDMITM (registered trade mark of The
SDMI Foundation). You cannot copy such files.
MPEG4 FILES
REPEAT ENTER
Off
FD
01 A - B
F
T
• Important: The above recommendations cannot be taken
as a guarantee that the DVD player will play MP3
* To resume normal play, press the CLEAR button.
recordings, or as an assurance of sound quality. You
should note that certain technologies and methods for
MP3 file recording on CD-Rs prevent optimal playback of
these files on your DVD player (degraded sound quality
and in some cases, inability of the player to read the files).
F
• Folder (
) : repeats the AVI files which have the same
extension in the current folder.
• Title ( T ) : repeats the title that is playing.
• A-B : repeats a segment of the file that you select.
• This unit can play a maximum of 3000 files and 300
folders per disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-26
ENG-27
MPEG4 Playback
Picture CD Playback
1. Select the desired folder. (See page 26 to select
the folder)
Note
Using the Display Function
1. During play, press the INFO button on the
remote.
MPEG4 Function Description
• If no buttons on the remote control pressed for 10
seconds, the menu will disappear.
Press the INFO button on the remote control to
display the menu again.
• Press the STOP button to return to the clips menu.
• When playing a Kodak Picture CD, the unit
displays the Photo directly, not the clips menu.
Function
Description
Reference page
-
2. Use the UP/DOWN buttons to select a Picture file in
clips menu and then press the ENTER button. You
should get a screen that looks like the one below.
During play, press the
button, it moves forward
or backward 5 minutes.
or
Skip
or
2. Use the UP/DOWN buttons to select the desired
item.
(
(
)
)
During play, press the
3. Use the LEFT/RIGHT buttons to make the
desired setup and then press ENTER.
• You may use the number buttons of the remote
control to directly access a title or to start the
playback from the desired time.
SERACH (
or
)
ENTER RETURN
button and press again to
search at a faster speed.
Allows you to search at a
faster speed in an AVI file.
(2X, 4X, 8X)
Search
or
-
CD-R JPEG Discs
• Only files with the ".jpg" and ".JPG" extensions can
be played.
Allows you to search at a
slower speed in an AVI file.
(1/8X, 1/4X, 1/2X)
4. To make the screen disappear, press the INFO
button again.
Slow Motion
Play
P 13
• If the disc is not closed, it will take longer to start
playing and not all of the recorded files may be
played.
• Use the INFO button on the remote control to select
the menu you want to view and then press the
ENTER button.
Each time the STEP button
is pressed, a new frame will
appear.
Step Motion
Play
DivX
P 13
P 22
01
Title
• Only CD-R discs with JPEG files in ISO 9660 or Joliet
format can be played.
0:00:13
Time
ZOOM
2X/4X/2X/Normal in order
•
: Returns to the Album Screen.
MP3 1/8
Audio
None
Subtitle
• The name of the JPEG file may not be longer than 8
characters and should contain no blank spaces or
special characters (. / = +).
- These functions may not work depending on
MPEG4 file.
• To see the next 6 pictures, press the
button.
button.
640x272
Size
• To see the previous 6 pictures, press the
• Only a consecutively written multisession disc can be
played. If there is a blank segment in the multisession
disc, the disc can be played only up to the blank
segment.
CD-R AVI file
•
: Each time the ENTER button is pressed, the
picture rotates 90 degrees clockwise.
This unit can play the following video compression
formats within the AVI file format:
- DivX 3.11 contents
- DivX 4 contents (Based on MPEG-4 Simple
Profile)
- DivX 5 contents (MPEG-4 simple profile plus
additional features such as bi-directional frames.
Qpel and GMC are also supported)
- XviD MPEG-4 compliant Contents.
To access the desired title when there is
more than one in the disc.
Title
Time
•
: Each time the ENTER button is pressed, the
picture is enlarged up to 4X.
(Normal ➝ 2X ➝ 4X ➝ 2X ➝ Normal)
• A maximum of 3000 images can be stored on a single
CD.
Allows playback of the film from a
desired time. You must enter the starting
time as a reference.
• Kodak Picture CDs are recommended.
•
: The unit enters slide show mode.
• When playing a Kodak Picture CD, only the JPEG
files in the pictures folder can be played.
*Before beginning the Slide Show, the picture interval
must be set.
To select the desired language of the
title soundtrack. The MP3, AC3 and
WMA are supported. You can use this
function using the AUDIO button.
(See page 19)
• Kodak Picture CD : The JPEG files in the pictures
folder can be played automatically.
Audio
ENTER RETURN
TIMER:
• Konica Picture CD : If you want to see the Picture,
select the JPEG files in the clips menu.
This unit supports all resolutions up to maximum below.
• Fuji Picture CD : If you want to see the Picture, select
the JPEG files in the clips menu.
DivX3.11 & DivX4 & XviD
Bitrate may fluctuate:
Device may skip decoding 720 x 576 @25fps
the high bitrate portions
and begin decoding again
when Bitrate returns to
normal.
DivX5
You will be able to choose the subtitle
languages or, if you prefer, turn them off
from the screen. You can use this
function using the SUBTITLE button.
(See page 19)
720 x 480 @30fps
• QSS Picture CD : The unit cannot play QSS Picture
CD.
Subtitle
Size
: Maximum bitrate : 4Mbps
•
: When this icon is selected and ENTER is
pressed, the pictures change automatically
with about a 6 second interval.
• If the number of files in 1 Disc is over 3000, only 3000
JPEG files can be played.
• If the number of folders in 1 Disc is over 300, only
JPEG files in 300 folders can be played.
File Size has a relationship with
resolution of a title. The larger file size
is, the higher resolution is displayed.
If the file resolution is small, it scales up
automatically. So you can see the larger
screen.
•
•
: The pictures change automatically with about
a 12 second interval.
Note
: The pictures change automatically with about
a 18 second interval.
• Some MPEG-4 files created on a personal
computer may not be play back. That is why
Codec Type, Version and Higher resolution over
specification is not supported.
*
*
Depending on a file size, the amount of time between
each picture may be different from the manual.
• This unit supports CD-R/RW written in MPEG4 in
accordance with the “ISO9660 format”.
If you don’t press any button, the slide show will start
automatically in about 10 seconds by default.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-28
ENG-29
Using the Setup Menu
Setting Up the Language Features
Setting Up the Language Features
The Setup menu lets you customize your DVD
player by allowing you to select various
language preferences, set up a parental level,
even adjust the player to the type of television
screen you have.
If you set the player menu, disc menu, audio
and subtitle language in advance, they will
come up automatically every time you watch a
movie.
Using the Disc Menu Language
Using the Audio Language
This function changes the text language only on the
disc menu screens.
1. With the unit in Stop mode, press the MENU
button.
1. With the unit in Stop mode, press the MENU
button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
Using the Player Menu Language
1. With the unit in Stop mode, press the MENU
button on the remote. Select Setup using
UP/DOWN buttons, then press the RIGHT or
ENTER button.
1. With the unit in Stop mode, press the MENU
button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3. Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3. Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
4. Select Audio using UP/DOWN buttons, then
press the RIGHT or ENTER button.
Language Setup : Setup of the Language.
3. Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
4. Select Disc Menu using UP/DOWN buttons, then
press the RIGHT or ENTER button.
5. Use the UP/DOWN buttons to select the desired
language.
Audio Setup : Setup of the Audio Options.
- Select “Original” if you want the default soundtrack
language to be the original language the disc is
recorded in.
Display Setup : Setup of the Display Options.
Use to select which type of screen you want to
watch and several display options.
5. Use the UP/DOWN buttons to select the desired
language.
- Select “Others” if the language you want is not listed.
- Select “Others” if the language you want is not listed.
Parental Setup : Setup of the Parental Level.
Allows users to set the level necessary to
prevent children from viewing unsuitable
movies such as those with violence, adult
subject matter, etc.
AUDIO LANGUAGE
Audio
4. Select Player Menu using UP/DOWN buttons,
then press the RIGHT or ENTER button.
Original
Others
DivX(R) Registration : Please use the
Registration code to register this player with
the DivX(R) Video on Demand service.
This will allow you to rent and purchase videos
using the DivX(R) Video On Demand format.
LANGUAGE SETUP
6. Press the ENTER button.
- The language is selected and the screen returns to
6. Press the ENTER button.
- The language is selected and the screen returns to
Language Setup menu.
Language Setup menu.
Disc Menu
Title Menu
5. Use the UP/DOWN buttons to select the desired
language.
Function
Setup
2. Use the UP/DOWN buttons on the remote to
access the different features.
3. Press the ENTER or RIGHT button to access the
sub features.
To make the setup screen disappear after setting
up, press the MENU button again.
6. Press the ENTER button.
- The language is selected and the screen returns to
Language Setup menu.
- To make the SETUP menu disappear, press the
RETURN or LEFT button.
Note
Depending on a disc, some Setup Menu selections
may not work.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-30
ENG-31
Setting Up the Language Features
Setting Up the Audio Options
Setting Up the Audio Options
Surround Sound Speaker Setup
1. With the unit in Stop mode, press the MENU button.
DTS
1. With the unit in Stop mode, press the MENU
button.
Using the Subtitle Language
1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
1. With the unit in Stop mode, press the MENU
button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
Note There is no analog audio output when you play
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3. Select Audio Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
DTS sound disc.
3. Select Audio Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
3. Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
4. Select Subtitle using UP/DOWN buttons, then
press the RIGHT or ENTER button.
PCM Down Sampling
1. On : Select this when the amplifier connected to the
player is not 96KHz compatible. In this case, the
96KHz signals will be down converted to 48KHZ.
5. Use the UP/DOWN buttons to select the desired
language.
2. Off : Select this when the amplifier connected to the
player is 96KHz compatible. In this case, all
signals will be output without any changes.
- Select “Automatic” if you want the subtitle language to
be the same as the language selected as the audio
preference.
4. Use the UP/DOWN buttons to select the desired
item. Then press the RIGHT or ENTER button.
Speaker Setup (See pages 33~34)
- Select “Others” if the language you want is not listed.
Some discs may not contain the language you select
as your initial language; in that case the disc will use its
original language setting.
4. Use the UP/DOWN buttons to select Speaker
Setup. Then press the RIGHT or ENTER button.
AUDIO SETUP
Note
AUDIO SETUP
Dolby Digital Output
:
PCM
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
MPEG-2 Digital Out
DTS
:
:
:
:
PCM
Off
Dolby Digital Output
:
PCM
MPEG-2 Digital Out
DTS
:
:
:
:
PCM
Off
Dynamic Compression
PCM Down Sampling
Speaker Setup
On
On
Dynamic Compression
PCM Down Sampling
Speaker Setup
On
• Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
On
• “DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
Dolby Digital Output
1. PCM : Converts to PCM(2CH) 48kHz audio. Select
PCM when using the Analog Audio Outputs.
• DVD-AUDIO
5. Use the UP/DOWN or LEFT/RIGHT buttons to
select the desired item. Then press the ENTER
button.
- Outputs 2 channel digital audio only.
- Some DVD-AUDIO discs do not downmix, so
they will not output 2 channel digital audio.
- MULTI channel DVD-AUDIO discs play back
through the analog outputs.
6. Press the ENTER button.
- The language is selected and the screen returns to
Language Setup menu.
2. Bitstream : Converts to Dolby Digital Bitstream
(5.1CH). Select Bitstream when using the
Digital Audio Output.
SPEAKER SETUP
Note Even when PCM Down sampling is Off
•
Some discs will only output down sampled
audio through the digital outputs.
• SACD
Outputs analog signals only.
Note
On
• If the selected language is not recorded on the
disc, the original pre-recorded language is
selected.
•
High sampling rate DVD-Audio discs
(192KHz or 176.4KHz) always output audio
down sampled to 96KHz or 88.2KHz through
the digital outputs.
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
•
When playing LPCM or PPCM DVD
protected by copyright. If digital audio source
is 48KHz/16bit the Digital output is mute.
MPEG-2 Digital Out
1. PCM : Converts to PCM(2CH) audio. Select PCM
when using the Analog Audio Outputs.
2. Bitstream : Converts to MPEG-2 Digital Bitstream
(5.1CH or 7.1CH). Select Bitstream when
using the Digital Audio Output.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-32
ENG-33
Surround Sound Speaker Setup
Setting Up the Display Options
Setting Up the Display Options
Video Output
Select Video Output.
The default settings : FRONT L, R (Small),
CENTER (Small), SURROUND (Small).
Select the size of the speakers to be connected.
1. With the unit in Stop mode, press the MENU button.
Still Mode
These options will help prevent picture shake in still
mode and display small text clearer.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
1. S-Video : Select when you want to use Video and
S-Video Out.
1. Auto : When selecting Auto, Field/Frame mode will be
automatically converted.
• Front (FL, FR)
- Large: Normally select this.
- Small: When the sound distorts or the surround
sound effects are difficult to hear, select this.
This activates the Dolby Digital bass redirection
circuitry and outputs the bass frequencies of the
speaker from the subwoofer.
2. Component (I-SCAN) : Select when you want to use
Video and Component 525i(Interlace) Out
3. Select Display Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
2. Field : Select this feature when the screen shakes in
the Auto mode.
3. Component (P-SCAN) & DVI : Select when you want
to use Component 525p(Progressive) Out or DVI.
3. Frame : Select this feature when you want to see
small letters more clearly in the Auto mode.
* If you press the VIDEO SEL. button, Video output
mode is changed in regular sequence in stop mode.
(S-Video ➝ I-SCAN ➝ P-SCAN & DVI )
Screen Messages
Use to turn on-screen messages On or Off.
• Center
- None: If you do not connect a center speaker,
select this.
- Large: Normally select this.
- Small: When the sound distorts, select this.
This activates the Dolby Digital bass redirection
circuitry and outputs the bass frequencies of the
center speaker from other speakers.
Black Level
Adjusts the brightness of the screen.(On/Off)
* If the Yes/No selection in the Display Setup sub Menu
is not made within 10 seconds, the screen returns to
the previous menu.
TV System
1. NTSC Disc : In case of using NTSC disc
• If your TV system only has PAL-Video input, you
must choose “PAL”. When you choose “PAL”,
Interlace output format is PAL 60 Hz output.
4. Use the UP/DOWN buttons to select the desired
item. Then press the RIGHT or ENTER button.
• If your TV system only has NTSC, input you must
choose “NTSC Output”.
• Surround (SL, SR)
- None: If you do not connect a center speaker,
select this.
• If you set up the NTSC TV system, DVI output frame
rate is 60 Hz.
DVI Output
:
Mode B
- Large (Rear/Side): Normally select either of these
according to the rear speaker’s position.
- Small (Rear/Side): When the sound distorts or the
surround sound effects are difficult to hear, select
either of these according to the rear speaker’s
position. This activates the Dolby Digital bass
redirection circuitry and outputs the bass
frequencies of the rear speaker from other
speakers.
2. PAL Disc : In case of using PAL disc
• If your TV system only has NTSC-Video input, you
must choose “NTSC Output”.
DVI Output
:
Mode B
DISPLAY SETUP
• If your TV system only has PAL input, you must
choose “PAL Output”.
S-Video
Component (I-SCAN)
• If you set up the PAL TV system, DVI output frame
rate is 50 Hz.
Component (P-SCAN) & DVI
TV ASPECT
4:3 Letter Box
4:3 Pan Scan
16:9 Wide
Setting up TEST
The test output signals come clockwise starting from
the Front Speaker(L). Adjust Channel Balance to
match to the volume of test signals memorized in
the system.
DVI Output
You can use this function to DVI output format.
• This function corrects a biased TV screen to secure a
normal view.
DVI Output
:
Mode B
• If DVI Output is set incorrectly, the screen can be
biased.
TV Aspect
FRONT(L)
FRONT(R)
➝
➝
CENTER
SURROUND(R)
➝
SUBWOOFER
➝
Depending on the type of television you have, you may
want to adjust the screen setting (aspect ratio).
➝
SURROUND(L)
1. 4:3 Letter Box : Select when you want to see the total
16:9 ratio screen DVD supplies, even though you
have a TV with a 4:3 ratio screen. Black bars will
appear at the top and bottom of the screen.
Important Note
Important Note
Note
• Consult your TV User’s Manual to find out if your
TV supports Progressive Scan. If Progressive
Scan is supported, follow the TV User’s Manual’s
instructions regarding Progressive Scan settings in
the TV’s menu system.
• In case of differ from your TV and TV system set-
ting value video output may be blocked.
How to make the SETUP menu disappear or return
to menu screen during set up. Press RETURN or
LEFT button.
2. 4:3 Pan Scan : Select this for conventional size TVs
when you want to see the central portion of the 16:9
screen. (Extreme left and right side of movie picture
will be cut off.)
• You have to setup TV system correctly.
• Refer to your TV user's manual.
• The subwoofer test output signal is lower than the
other speakers.
• If Video Output is set incorrectly, the screen can
be blocked. (See page 40)
• If you use NTSC disc at PAL TV system, motion
picture may be distorted.
3. 16:9 Wide : You can view the full 16:9 picture on your
widescreen TV.
• The MPEG Multichannel logo is a trademark
registered by PHILIPS Corporation.
• If you use PAL disc at NTSC TV system, motion
picture may be distorted.
• If you set Front (L, R) “Small”, LFE(Subwoofer) is
set “On” automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-34
ENG-35
Setting Up the Parental Control
Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that have been assigned a rating which helps you
control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.
Setting Up the Rating Level
6. Select the Rating Level you want using
UP/DOWN buttons.
For example, if you select up to Level 6, discs
that contain Level 7, 8 will not play.
- To cancel the Rating Level, select No using RIGHT or
ENTER in Use Password.
1. With the unit in Stop mode, press the MENU
button.
5. Enter your password. The Re-enter Password
screen appears to confirm the password.
Enter your password again.
1. With the unit in Stop mode, press the MENU
button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
2. Select Setup using UP/DOWN buttons, then
The player is locked (
).
The player is locked (
).
press the RIGHT or ENTER button.
e.g) Setting up in LEVEL6.
3. Select Parental Setup using UP/DOWN buttons,
CREATE PASSWORD
then press the RIGHT or ENTER button.
RATING LEVEL
Enter Password
Level 8 Adult
Level 7
Level 6
-
-
-
-
Level 5
Level 4
Level 3
Level 2
Level 1 Kids Safe
0 ~ 9
3. Select Parental Setup using UP/DOWN buttons,
CREATE PASSWORD
then press the RIGHT or ENTER button.
About the Change Password
4. Enter your password.
The Parental Setup screen appears.
Re-enter Password
- Highlight Change Password using UP/DOWN buttons.
- Press ENTER button.
-
-
-
-
4. Use RIGHT or ENTER to select Yes if you want
to use a password. The Enter Password screen
appears.
The Change Password screen appears.
- Enter your new password. Enter the new password again.
PASSWORD CHECK
0 ~ 9
Enter Password
PARENTAL SETUP
-
-
-
-
Note
Use Password
:
No
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
0 ~ 9
• If you have forgotten your password, see page 40.
5. Select Rating Level using UP/DOWN buttons,
and press ENTER or RIGHT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-36
ENG-37
Controlling a TV with the Remote
Firmware upgrade
The remote can also be set up to control most TVs. To program the remote, use the
code that corresponds to your brand.
4. Press the ENTER button.
Firmware upgrade starts
Introduction
Samsung will often support the software upgrade to
improve the performance of this unit to the latest
status, through Samsung Internet Site
TV Codes
BRAND
ANAM
AIWA
CODE
BRAND
NORDMENDE
NOKIA
CODE
(www.samsung.com).
10, 11, 12, 13, 14, 15, 16, 17, 18
72, 73
74
Because the specially new mpeg4 codec continues
and it is appearing. What improvements are made
depends on the upgrade software you are using as
well as the software that your DVD-player contained
before the upgrade.
82
BANG&OLUFSEN
BLAUPUNKT
BRANDT
BRIONVEGA
CGE
57
71
73
57
52
75
PANASONIC
PHILPS
53, 54, 74, 75
06, 55, 56, 57
06, 56, 57
58, 59, 73, 74, 75
06, 56
57
45, 46
74
PHONOLA
PIONEER
RADIOLA
RADIOMARELLI
RCA
CONTINENTAL EDISON
5. In the middle of the writing, the tray will open
automatically. After taking out the disc, please
wait for about 2 minutes.
How to make an upgrade disc
19, 20, 23, 24, 25, 26, 27, 28, 29,
30 , 31, 32, 33, 34
DAEWOO
REX
Write the downloaded file onto a blank CD-R or
CD-RW disc, using the following settings:
EMERSON
FERGUSON
FINLUX
FORMENTI
FUJITSU
GRADIENTE
GRUNDIG
HITACHI
IMPERIAL
JVC
64
73
SABA
57, 72, 73, 74, 75
74
01, 02, 03, 04, 05, 06, 07, 08, 09
41, 42, 43, 44, 48
06
74
36, 37, 38, 39, 48
71
57
57
SALORA
SAMSUNG
SANYO
SCHNEIDER
SELECO
SHARP
SIEMENS
SINGER
SINUDYNE
SONY
1. You have to download a new file through
Download Center of Samsung Internet Site
(www.samsung.com).
6. If the unit was successfully updated, the unit will
turn off and on after closing the tray automatically.
When the unit turns on, this screen will display.
06, 49, 57
57
84
70
49, 52, 71
60, 72, 73, 75
52
61, 79
2. Write the file to Disc using CD-RW of your
computer.
Note
• File System CD-ROM ISO Level
• Character set ISO 9660
• Finalized, single session
• Write speed low
LG
06, 19, 20, 21, 22, 78
35, 48
LOEWE
06, 69
06, 57
40
57
TELEAVA
TELEFUNKEN
THOMSON
73
LOEWE OPTA
MAGNAVOX
METZ
67, 73, 75, 76
72, 73, 75
7. Select the desired language.
THOMSON ASIA 80, 81
MITSUBISHI
MIVAR
NEC
NEWSAN
NOBLEX
06, 48, 62, 65
52, 77
83
68
66
TOSHIBA
WEGA
YOKO
47, 48, 49, 50, 51, 52
Note • If the “Select Menu Language” does't
appears, please contact to “Samsung
Service Center”.
57
06
63
Upgrade procedure
• Do not press any button and unplug
the power code during upgrade.
1. Press OPEN/CLOSE to open the disc tray.
2. Insert the upgrade CD-R disc, label facing up.
3. Press OPEN/CLOSE to close the disc tray.
ZENITH
• The upgrade procedure may change,
refer to the web site
(www.samsung.com).
1. Turn on the TV.
4. If the TV turns off, setup is complete.
Enter other codes of the same brand if the first
code does not work.
Firmware upgrade appears on the display
2. Point the DVD’s remote at the TV.
3. While holding the TV POWER button down, enter
the code for your brand.
5. To operate the TV, use the “TV Function Buttons”
described on page 8.
Important Note
e.g) For Samsung 2 TVs
• The remote may not be able to control every
model TV of the brands listed.
• If you replace the remote control's batteries, set
the brand code again.
While holding down the TV POWER button,
enter 0 and then 1.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-38
ENG-39
Troubleshooting
Troubleshooting
Before requesting service (troubleshooting), please check the following.
Action
Action
Problem
Page
Problem
Page
•
•
•
Check the batteries in the remote. They may need replacing.
Operate the remote control at a distance of no more than 20 feet.
Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try to operate the remote again.
•
•
Check the Video output is DVI enabled.
Check the connection between the TV and the DVI
jack of DVD player.
No operations can be
performed with the remote.
No DVI output.
P11~12
P3
•
See if the TV supports this 480p/576p/720p/768p/1080i DVD player.
•
•
Ensure that the disc is installed with the label side facing up.
Check the region number of the DVD.
•
If snow noise appears on the screen, it means
that TV does not support HDCP (High-bandwidth Digital Content
Protection).
Disc does not play.
Abnormal DVI output
screen.
P5
P12
P35
5.1 channel sound is not
being reproduced.
•
5.1 channel sound is reproduced only when the following condi-
tions are met. :
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
Check whether the disc being played has the “Dolby 5.1 ch” mark
on the outside.
•
•
Check your TV system set up correctly.
DVI output Judder
The screen judder phenomenon may occur when frame rate is con-
verted from 50Hz to 60Hz or 60Hz to 50Hz.
Refer to your TV users manual.
P9
•
•
•
•
Check if your audio system is connected and working properly.
In a SETUP Menu, is the Audio Output set to Bitstream?
P32
The
screen.
icon appears on
•
The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that
is out of range.
P13
Disc Menu doesn’t appear.
•
•
Check if the disc has a Menu.
Play mode differs from the
Setup Menu selection.
Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
P30~37
The screen ratio cannot
be changed.
•
•
The Screen Ratio is fixed on your DVDs.
P34~35
P32~34
Make sure you have selected the correct Digital Output in the
Audio Options Menu.
No audio.
The screen is blocked
•
Press power on from a cold start with no disc in the unit.
Press the
button on the front panel for 5 seconds.
P34~35
P36~37
The SELECT MENU LANGUAGE display will appear.
Select the number button of the desired language.
•
Press power on from a cold start with no disc in the unit.
Forgot password
Press the
button on the front panel for 5 seconds.
The SELECT MENU LANGUAGE display will appear. Select the
number button of the desired language. Press the MENU button,
and then press DOWN button to select Setup, then press RIGHT or
ENTER. Press Up or Down to select Parental Setup The Parental
Setup is now unlocked as indicated on the display.
You can change your password.
If you experience other
problems.
•
•
Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
If the problem still cannot be solved, please contact your nearest
authorized service center.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-40
ENG-41
Specifications
Power Requirements
AC 110-240 V, 50/60 Hz
Power Consumption
Weight
14 W
1.9 Kg
General
Dimensions
430mm (W) X 207mm (D) X 50mm (H)
+5°C to +35°C
Operating Temperature Range
Operating Humidity Range
10 % to 75 %
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time
(Single Sided, Single Layer Disc) : 135 min.
DVD
(DIGITAL VERSATILE DISC)
CD : 12Cm
(COMPACT DISC)
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
Disc
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
CD : 8Cm
(COMPACT DISC)
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min. (Video + Audio)
VCD : 12Cm
1 channel : 1.0 Vp-p (75 Ω load)
Composite Video
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Component Video
S-VIDEO
Video
Output
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.3 Vp-p (75 Ω load)
Digital Visual Interface
DVI
2 Channel
5.1 Channel
L(1/L), R(2/R)
F/L, F/R, R/L, R/R, C/T, S/W
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
*Frequency Response
Audio
Output
*S/N Ratio
110 dB
100 dB
0.004 %
*Dynamic Range
*Total Harmonic Distortion
*: Nominal specification
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-42
|