Samsung DVD Player BD D7000 User Guide

BD-D7000  
Blu-ray Disc Player  
user manual  
imagine the possibilities  
Thank you for purchasing this Samsung product.  
To receive more complete service,  
please register your product at  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Information  
Warning  
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
The lighting flash and Arrowhead within the CAUTION: TO REDUCE THE RISK OF ELECTRIC The explanation point within the triangle  
triangle is a warning sign alerting you of  
dangerous voltage inside the product.  
SHOCK, DO NOT REMOVE COVER (OR BACK)  
is a warning sign alerting you of important  
NO USER SERVICEABLE PARTS INSIDE. REFER instructions accompanying the product.  
SERVICING TO QUALIFIED SERVICE PERSONNEL.  
WARNING  
CLASS 1 LASER PRODUCT  
To reduce the risk of fire or electric shock, do  
This Compact Disc player is classified as a CLASS  
1 LASER product. Use of controls, adjustments  
or performance of procedures other than those  
specified herein may result in hazardous radiation  
exposure.  
not expose this appliance to rain or moisture.  
FCC NOTE (for U.S.A)  
This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC rules. These limits  
are designed to provide reasonable protection  
against harmful interference in a residential  
installation. This equipment generates, uses  
and can radiate radio frequency energy and, if  
not installed and used in accordance with the  
instructions, may cause harmful interference  
to radio or television reception, which can be  
determined by turning the equipment off and on.  
Complies with 21CFR 1040.10 except for  
deviations pursuant to Laser Notice No. 50, dated  
June 24, 2007.  
DANGER :  
VISIBLE AND INVISIBLE LASER RADIATION  
WHEN OPEN. AVOID DIRECT EXPOSURE TO  
BEAM. (FDA 21 CFR)  
CAUTION :  
CLASS 3B VISIBLE AND INVISIBLE LASER  
RADIATION WHEN OPEN. AVOID EXPOSURE  
TO THE BEAM (IEC 60825-1)  
The user is encouraged to try to correct the  
interference by one or more of the following measures.  
Reorient or relocate the receiving antenna.  
THIS PRODUCT UTILIZES A LASER. USE  
OF CONTROLS OR ADJUSTMENTS OR  
PERFORMANCE OF PROCEDURES OTHER  
THAN THOSE SPECIFIED HEREIN MAY  
RESULT IN HAZARDOUS RADIATION  
EXPOSURE. DO NOT OPEN COVER AND DO  
NOT REPAIR YOURSELF. REFER SERVICING  
TO QUALIFIED PERSONNEL.  
Increase the separation between the equipment  
and receiver.  
Connect this equipment into an outlet on a  
circuit different from that to which the receiver is  
connected.  
Consult the dealer or an experienced radio/TV  
technician for help.  
This class B digital product meets all  
requirements of the Canadian Interference -  
Causing Equipment Regulations.  
CLASS 1  
KLASSE 1  
LUOKAN 1  
KLASS 1  
LASER PRODUCT  
LASER PRODUKT  
LASER LAITE  
Note to CATV system installer  
LASER APPARAT  
PRODUCTO LÁSER CLASE 1  
This reminder is provided to call CATV system  
installer’s attention to Article 820-40 of the  
National Electrical Code (Section 54 of Canadian  
Electrical Code, Part I) that provides guidelines  
for proper grounding and, in particular, specifies  
that the cable ground shall be connected to the  
grounding system of the building as close to the  
point of cable entry as practical.  
NOTE  
If the Region number of a Blu-ray Disc/DVDs does  
not correspond to the Region number of this player,  
the player cannot play the disc.  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Information  
Precautions  
13. Unplug this apparatus during lightning storms  
or when unused for long periods of time.  
14. Refer all servicing to qualified service  
personnel. Servicing is required when the  
apparatus has been damaged in any way,  
such as power-supply cord or plug is  
Important Safety Instructions  
Read these operating instructions carefully before  
using the unit. Follow all the safety instructions  
listed below.  
damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus  
has been exposed to rain or moisture, does  
not operate normally, or has been dropped.  
Keep these operating instructions handy for future  
reference.  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
Viewing using 3D function  
IMPORTANT HEALTH AND SAFETY  
INFORMATION FOR 3D PICTURES.  
Read and understand the following safety  
information before using the 3D function.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
7. Do not block any ventilation openings. Install  
in accordance with the manufacturer’s  
instructions.  
Some viewers may experience discomfort while  
viewing 3D TV such as dizziness, nausea, and  
headaches.  
If you experience any such symptom, stop  
viewing 3D TV, remove the 3D Active Glasses,  
and rest.  
8. Do not install near any heat sources such  
as radiators, heat registers, stoves, or other  
apparatus (including AV receivers) that  
produce heat.  
Watching 3D images for an extended period of  
time may cause eye strain. If you feel eye strain,  
stop viewing 3D TV, remove your 3D Active  
Glasses, and rest.  
9. Do not defeat the safety purpose of the  
polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the  
other. A grounding type plug has two blades  
and a third grounding prong. The wide blade  
or the third prong are provided for your safety.  
If the provided plug does not fit into your  
outlet, consult an electrician for replacement  
of the obsolete outlet.  
A responsible adult should frequently check on  
children who are using the 3D function.  
If there are any reports of tired eyes, headaches,  
dizziness, or nausea, have the child stop viewing  
3D TV and rest.  
Do not use the 3D Active Glasses for other  
purposes (such as general eyeglasses,  
sunglasses, protective goggles, etc.)  
10. Protect the power cord from being walked on  
or pinched particularly at plugs, convenience  
receptacles, and the point where they exit  
from the apparatus.  
Do not use the 3D function or 3D Active Glasses  
while walking or moving around. Using the 3D  
function or 3D Active Glasses while moving  
around may cause you to bump into objects,  
trip, and/or fall, and cause serious injury.  
11. Only use attachments/accessories specified  
by the manufacturer.  
12. Use only with the cart,  
stand, tripod, bracket,  
or table specified by the  
manufacturer, or sold with  
the apparatus. When a cart  
is used, use caution when  
moving the cart/apparatus combination to  
avoid injury from tip-over.  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Storage & Management  
Handling Cautions  
Do not write on the printed side with a ball-point  
pen or pencil.  
Disc Handling  
Do not use record cleaning sprays or antistatic  
sprays to clean discs. Also, do not use volatile  
chemicals, such as benzene or thinner.  
Disc Shape  
Use discs with regular  
Do not apply labels or stickers to discs. (Do not  
use discs fixed with exposed tape adhesive or  
leftover peeled-off stickers.)  
shapes. If you use an irregular  
disc (a disc with a special  
shape), you can damage the player.  
Do not use scratch-proof protectors or covers.  
Holding discs  
Do not use discs printed with label printers  
available on the market.  
Avoid touching the surface of  
a disc where data has been  
recorded.  
Do not load warped or cracked discs.  
Before connecting other components to this  
player, be sure to turn them off.  
Blu-ray Discs  
Do not move the player while it is playing a disc.  
The disc can be scratched or damaged and the  
player’s internal parts can be damaged.  
Do not leave a Blu-ray Disc in the player for long  
periods of time. Remove the Blu-ray Disc from  
the player and store it in its case.  
Do not put a flower vase filled with water or any  
small metal objects on the player.  
Be careful not to scratch or leave fingerprints on  
the surface of the Blu-ray Disc.  
Be careful not to put your hand into the disc  
slot.  
DVD-VIDEO, Audio CD (CD-DA)  
Do not place anything other than the disc in the  
disc slot.  
Wipe off dirt or contamination on the disc with a  
soft cloth.  
Interference from exterior sources such as  
lightening and static electricity can affect  
the normal operation of this player. If this  
occurs, turn the player off and on again with  
the POWER button, or disconnect and then  
reconnect the AC power cord to the AC power  
outlet. The player will operate normally.  
Disc Storage  
Be careful not to damage the disc because the  
data on these discs is highly vulnerable to the  
environment.  
Do not keep under direct sunlight.  
Keep in a cool ventilated area.  
Store vertically.  
Be sure to remove the disc and turn off the  
player after use.  
Disconnect the AC power cord from the AC  
outlet when you don’t intend to use the player  
for long periods of time.  
Keep in a clean protection jacket.  
If you move your player suddenly from a cold  
place to a warm place, condensation may occur  
on the operating parts and lens and cause  
abnormal disc playback. If this occurs, unplug  
the player, wait for two hours, and then connect  
the plug to the power outlet. Then, insert the  
disc, and try to play back again.  
To clean a disc, wipe it in a straight  
line from the inside to the outside of  
the disc.  
Do not expose the player to any  
liquid.  
When the player is turned off, but still connected  
to a wall socket, it is in standby mode and will  
continue to draw power.  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Information  
Do not expose the player to dripping or  
splashing. Do not place objects filled with  
liquids, such as vases, on the player.  
Restrictions on Playback  
This player may not respond to all operating  
commands because some Blu-ray Disc, DVD,  
and CD discs allow specific or limited operation  
and provide only certain features during  
playback.  
To turn off the player completely so that it draws  
no power, you must remove its power plug from  
the wall socket. Consequently, you should keep  
the player’s power plug easily accessible at all  
times.  
Please note that this is not a defect in the  
player.  
Do not touch the power plug with a wet hand.  
Otherwise, it can cause an electric shock.  
Samsung cannot guarantee that this player  
will play every disc bearing the Blu-ray Disc,  
DVD or CD logo because disc formats evolve,  
and problems and errors may occur during the  
creation of Blu-ray Disc, DVD, and CD software  
and/or the manufacture of discs.  
Do not share one power socket with multiple  
electric devices. Otherwise, it may cause an  
overheat, resulting in a fire.  
If you encounter an abnormal noise, burning  
smell or smoke, turn off the power switch  
immediately and disconnect the power plug  
from the wall outlet. Then, contact the nearest  
customer center for technical assistance. If you  
still use the product as it is, this may cause an  
electric shock or fire.  
Please contact the SAMSUNG customer care  
center if you have questions or encounter  
difficulty in playing Blu-ray Disc, DVD, or CD  
discs in this player. Also, refer to rest of this user  
manual for additional information on playback  
restrictions.  
Maintenance of Cabinet  
Before you clean the Blu-ray Disc’s cabinet, be  
sure to disconnect the AC power cord from the  
AC outlet.  
Do not use benzene, thinner, or other solvents  
for cleaning.  
Wipe the cabinet with a soft cloth.  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
2
2
Blu-ray Disc Features  
KEy FEATURES  
Blu-ray Disc Player Features  
3
4
4
4
5
5
Warning  
SAFETy INFORMATION  
Precautions  
Important Safety Instructions  
Viewing using 3D function  
Disc Storage & Management  
Disc Handling  
11 Before using the User Manual  
GETTING STARTED  
11  
11  
12  
12  
13  
13  
14  
16  
Disc Types and Contents your player can play  
Disc types your player cannot play  
Blu-ray Disc Compatibility  
Disc Types  
Region Code  
Copyright  
Supported File Formats  
Logos of Discs the player can play  
16 Accessories  
17 Front Panel  
18 Rear Panel  
19 Remote Control  
19  
20  
Tour of the Remote Control  
Setting the Remote Control to Operate Your TV  
21 Connecting to a TV  
CONNECTIONS  
21  
22  
Case 1 : Connecting to a TV with an HDMI Cable  
- Best Quality (Recommended)  
Case 2 : Connecting to a TV with an Audio/Video  
cable - Good Quality  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
23 Connecting to an Audio System  
CONNECTIONS  
23  
24  
24  
Case 1 : Connecting to an Audio System  
(HDMI supported AV receiver) - Best Quality  
(Recommended)  
Case 2 : Connecting to an Audio System  
(AV receiver with Dolby Digital or DTS decoder)  
- Better Quality  
Case 3 : Connecting to an Audio System  
(Stereo Amplifier) - Good Quality  
25 Connecting to the Network  
25  
26  
Cable Network  
Wireless Network  
27 Initial Settings  
SETUP  
28 Accessing the Settings Menu  
29 Display  
29  
30  
30  
30  
30  
32  
32  
33  
33  
33  
3D Settings  
TV Aspect (Picture Size and Format)  
Smart Hub Screen Size  
BD Wise (Samsung Players only)  
Resolution  
HDMI Color Format  
Movie Frame (24Fs)  
HDMI Deep Color  
Still Mode  
Progressive Mode  
33 Audio  
33  
35  
35  
35  
35  
36  
Digital Output  
PCM Downsampling  
Dynamic Range Control  
Downmixing Mode  
DTS Neo:6 Mode  
Audio Sync  
36 Network  
36  
39  
40  
Network Settings  
Network Status  
BD-LIVE Internet Connection  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40 System  
SETUP  
40  
40  
40  
41  
41  
41  
Initial Settings  
Anynet+(HDMI-CEC)  
BD Data Management  
Time Zone  
DivX® Video On Demand  
Reset  
41 Language  
41 Security  
41  
41  
41  
BD Parental Rating  
DVD Parental Rating  
Change Password  
42 General  
42  
42  
Front Display  
Network Remote Control  
42 Support  
42  
44  
Software Upgrade  
Contact Samsung  
45 Playing a Video  
BASIC FUNCTIONS  
45  
45  
46  
Playback  
3D Converter  
Disc Structure  
46 Using the Disc Menu/Title Menu/Popup Menu  
46  
46  
46  
46  
Using the Disc Menu  
Using the Title Menu  
Playing the Title List  
Using the Popup Menu  
47 Using the Search and Skip Functions  
47  
47  
Searching for a Desired Scene  
Skipping Chapters  
47 Slow Motion Play/Step Motion Play  
47  
47  
Slow Motion Play  
Step Motion Play  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
47 Using the TOOLS button  
BASIC FUNCTIONS  
48  
48  
48  
48  
49  
49  
49  
50  
50  
Moving to a Desired Scene Directly  
Repeating the Title or Chapter  
Repeating a Section  
Changing to Full Screen  
Selecting the Picture Settings  
Selecting the Audio Language  
Selecting the Subtitle Language  
Changing the Camera Angle  
Setting BONUSVIEW  
50 Listening to Music  
50  
51  
51  
Playing an Audio CD (CD-DA)/MP3  
Repeat an Audio CD (CD-DA)/MP3  
Playlist  
52 Playing back Pictures  
52  
52  
Playing JPEG files  
Using the TOOLS button  
53 Playing back a USB Storage Device  
54 Using Smart Hub  
NETWORK SERVICES  
APPENDIx  
54  
57  
59  
61  
Starting Smart Hub for the First Time  
The Settings Menu - BLUE (D)  
The Edit Mode Menu - YELLOW (C)  
The Sort Menu - GREEN (B)  
61 Samsung Apps  
61  
For Pay Apps  
63 BD-LIVE™  
63 Using the AllShare Function  
64 Troubleshooting  
66  
Repairs  
67 Index  
68 Specifications  
10  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Before using the User Manual  
Disc Types and Contents your player can play  
Term  
Logo  
Icon  
Definition  
h
z
Indicates a function available on a BD-ROM or BD-RE/-R disc recorded in the BD-RE  
format.  
VIDEO  
Z
Indicates a function available on a DVD-VIDEO or recorded DVD+RW/ DVD-RW(V)/  
DVD-R/+R discs that have been recorded and finalized.  
Indicates a function available in a CD-RW/-R, DVD-RW/-R, BD-RE/-R disc or a USB  
storage media containing DivX, MKV, MP4 contents.  
-
o
G
Indicates a function available on an audio CD-RW/-R (CD-DA format).  
MUSIC  
PHOTO  
Indicates a function available in a CD-RW/-R, DVD-RW/-R, BD-RE/-R disc or a USB  
storage media containing MP3 or WMA contents.  
-
-
Indicates a function available in a CD-RW/-R, DVD-RW/-R, BD-RE/-R disc or a USB  
storage media containing JPEG contents.  
NOTE  
The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.  
If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.  
Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.  
Your player will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds 30 Mbps.  
Disc types your player cannot play  
HD DVD  
DVD-RAM  
DVD-RW(VR mode)  
3.9 GB DVD-R Disc for  
Authoring.  
DVD-ROM/PD/MV-  
Disc, etc  
Super Audio CD  
(except CD layer)  
CVD/CD-ROM/CDV/  
CD-G/CD-I/LD  
(CD-Gs play audio only,  
not graphics.)  
English  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
NOTE  
Disc Types  
Some commercial discs and DVDs purchased  
outside your region may not play on this player.  
BD-ROM  
Playback may not work for some types of discs, or  
when you use specific operations, such as angle  
change and aspect ratio adjustment. Information  
about the discs is written in detail on the disc box.  
Please refer to this if necessary.  
Blu-ray ROM discs can only be played back.  
This player can play back pre-recorded  
commercial BD-ROM discs.  
BD-RE/-R  
Do not allow the disc to become dirty or scratched.  
Fingerprints, dirt, dust, scratches or deposits of  
cigarette smoke on the recording surface may make  
it impossible to use the disc for playback.  
Blu-ray RE/-R discs can be recorded on and  
played back.  
This player can play back a BD-RE/-R disc  
recorded by other compatible Blu-ray Disc  
recorders.  
Discs with PAL programs recorded on them cannot  
be played using this player.  
This player is compatible with the NTSC color system  
only.  
DVD-VIDEO  
This player can play back pre-recorded  
commercial DVDs (DVD-VIDEO discs) with  
movies.  
When you play a BD-J title, loading may take longer  
than a normal title or some functions may operate  
slowly.  
When switching from the first layer to the  
second layer of a dual-layered DVD-VIDEO disc,  
there may be momentary distortion in the image  
and sound. This is not a malfunction of the  
player.  
This player may not respond to all operating  
commands because some Blu-ray Disc, DVD, and  
CD discs allow specific or limited operation and  
provide only certain features during playback.  
Please note that this is not a defect in the player.  
Samsung cannot guarantee that this player will play  
every disc bearing the Blu-ray Disc, DVD or CD logo  
because disc formats evolve, and problems and  
errors may occur during the creation of Blu-ray Disc,  
DVD, and CD software and/or the manufacture of  
discs.  
DVD-RW/-R/+R  
This player can play back a DVD-RW/-R/+R disc  
recorded and finalized with a DVD video recorder.  
The ability to play back may depend on recording  
conditions.  
Please contact the SAMSUNG customer care center  
if you have questions or encounter difficulty when  
playing Blu-ray Disc, DVD, or CD discs in this player.  
Also, refer to rest of this user manual for additional  
information on playback restrictions.  
DVD+RW  
This player can play back a DVD+RW disc  
recorded with a DVD Video recorder. The  
ability to play back may depend on recording  
conditions.  
Blu-ray Disc Compatibility  
Audio CD (CD-DA)  
Blu-ray Disc is a new and evolving format.  
Accordingly, disc compatibility issues are possible.  
Not all discs are compatible and not every disc will  
play back. For additional information, refer to the  
Compliance and Compatibility Notice section of  
this user manual.  
This player can play back CD-DA format audio  
CD-RW/-R discs.  
The player may not be able to play some  
CD-RW/-R discs due to the condition of the  
recording.  
1ꢀ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD-RW/-R  
Region Code  
Use a 700MB (80 minute) CD-RW/-R disc.  
If possible, do not use an 800MB (90 minute) or  
larger disc, as the disc may not play back.  
Both players and discs are coded by region.  
These regional codes must match for a disc to  
play. If the codes do not match, the disc will not  
play.  
If the CD-RW/-R disc was not recorded as a  
closed session, you may experience delays  
when playing back the beginning of the disc or  
all recorded files may not play.  
The Region Number for this player is displayed on  
the rear panel of the player.  
Region  
Some CD-RW/-R discs may not play on this  
player, depending on the device which was  
used to burn them. For contents recorded on  
CD-RW/-R media from CDs for your personal  
use, playability may vary depending on the  
contents and discs.  
Disc Type  
Area  
Code  
North America, Central America,  
South America, Korea, Japan,  
Taiwan, Hong Kong and South  
East Asia.  
A
Europe, Greenland, French  
territories, Middle East, Africa,  
Australia and New Zealand.  
AVCHD (Advanced Video Codec High  
Definition)  
Blu-ray Disc  
B
This player can play back AVCHD format discs.  
These discs are normally recorded and used in  
camcorders.  
India, China, Russia, Central  
and South Asia.  
C
1
2
3
The AVCHD format is a high definition digital  
video camera format.  
The U.S., U.S. territories and  
Canada  
The MPEG-4 AVC/H.264 format compresses  
images with greater efficiency than the  
conventional image compressing format.  
Europe, Japan, the Middle East,  
Egypt, South Africa, Greenland  
Some AVCHD discs use the “x.v.Color” format.  
This player can play back AVCHD discs that use  
“x.v.Color” format.  
Taiwan, Korea, the Philippines,  
Indonesia, Hong Kong  
“x.v.Color” is a trademark of Sony Corporation.  
“AVCHD” and the AVCHD logo are trademarks  
of Matsushita Electronic Industrial Co., Ltd. and  
Sony Corporation.  
Mexico, South America,  
Central America, Australia,  
New Zealand, Pacific Islands,  
Caribbean  
DVD-VIDEO  
4
NOTE  
Some AVCHD format discs may not play, depending  
on the recording condition.  
Russia, Eastern Europe, India,  
most of Africa, North Korea,  
Mongolia  
5
6
AVCHD format discs need to be finalized.  
“x.v.Color” offers a wider color range than normal  
DVD camcorder discs.  
China  
Some DivX, MKV and MP4 format discs may not  
play, depending on the video resolution and frame  
rate condition.  
Copyright  
© 2011 Samsung Electronics Co.,Ltd.  
All rights reserved; No part or whole of this user’s  
manual may be reproduced or copied without the  
prior written permission of Samsung Electronics  
Co.,Ltd.  
English  
1ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Supported File Formats  
Notes on the USB connection  
Your player supports USB storage media, MP3 players, digital cameras, and USB card readers.  
The player does not support folder or file names longer than 128 characters.  
Some USB/digital camera devices may not be compatible with the player.  
Your player supports the FAT16, FAT32, and NTFS files systems.  
Connect USB devices directly to the player’s USB port. Connecting through a USB cable may cause  
compatibility problems.  
Inserting more than one memory device into a multi-card reader may cause the reader to operate  
improperly.  
The player does not support the PTP protocol.  
Do not disconnect a USB device during a “loading” process.  
The bigger the image resolution, the longer the image takes to display.  
This player cannot play MP3 files with DRM (Digital Rights Management) downloaded from commercial  
sites.  
External HDD device is not supported.  
Your player only supports the video that is under 30fps (frame rate).  
Video File Support  
Frame rate  
(fps)  
File Extension  
Container  
Video Codec  
Resolution  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
Bit rate (Mbps) Audio Codec  
Divx 3.11/4.x/  
6 ~ 30  
8
MP3  
AC3  
5.1/6.0  
XviD  
6 ~ 30  
6 ~ 30  
6 ~ 30  
6 ~ 30  
8
25  
8
*.avi  
LPCM  
AVI  
MKV  
ASF  
H.264 BP/MP/HP  
MPEG4 SP/ASP  
Motion JPEG  
ADPCM  
DTS Core  
8
DivX 3.11/4.x/  
5.1/6.0  
6 ~ 30  
8
1920x1080  
MP3  
AC3  
6 ~ 30  
6 ~ 30  
6 ~ 30  
6 ~ 30  
8
25  
8
XviD  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
*.mkv  
*.asf  
LPCM  
H.264 BP/MP/HP  
MPEG4 SP/ASP  
Motion JPEG  
ADPCM  
DTS Core  
8
DivX 3.11/4.x  
/5.1/6.0  
6 ~ 30  
8
1920x1080  
MP3  
AC3  
6 ~ 30  
6 ~ 30  
6 ~ 30  
6 ~ 30  
6 ~ 30  
6 ~ 30  
6 ~ 30  
6 ~ 30  
8
25  
8
XviD  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
LPCM  
ADPCM  
WMA  
H.264 BP/MP/HP  
MPEG4 SP/ASP  
Motion JPEG  
8
Window Media  
Video v9  
*.wmv  
*.mp4  
25  
WMA  
ASF  
25  
H.264 BP/MP/HP  
MPEG4 SP/ASP  
XVID  
MP3  
ADPCM  
AAC  
8
MP4  
8
1ꢂ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADPCM  
AAC  
6 ~ 30  
6 ~ 30  
24/25/30  
24/25/30  
25  
8
30  
30  
H.264 BP/MP/HP  
MPEG4 SP/ASP  
MPEG2  
1920x1080  
1920x1080  
1920x1080  
352 X 288  
*.3gp  
*.vro  
3GPP  
HE-AAC  
AC3  
VRO  
VOB  
MPEG  
MPEG1  
LPCM  
24/25/30  
24/25/30  
6 ~ 30  
24/25/30  
6 ~ 30  
30  
30  
25  
30  
25  
25  
MPEG1  
MPEG2  
H.264  
MPEG2  
H.264  
VC1  
352 X 288  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
1920x1080  
AC3  
MPEG  
LPCM  
AAC  
*.mpg  
PS  
TS  
*.mpeg  
AC3  
*.ts  
*.tp  
AAC  
MP3  
*.trp  
DD+  
6 ~ 30  
HE-AAC  
Limitations  
.
-
Even when the file is encoded by a supported codec mentioned above, a file might not be played if its  
content has a problem.  
-
-
-
-
Normal playback is not guaranteed if the file's container information is wrong or the file itself is corrupted.  
Files having higher Bit rate/frame rate than standard may stutter with sound/video playback.  
Seek (skip) function is not available if the file's index table is damaged.  
When you playback a file remotely through network connection, video playback may stutter depending  
on established network speed.  
Video decoder  
.
-
-
-
Supports up to H.264 Level 4.1  
Does not support H.264 FMO/ASO/RS, VC1 SP/MP/AP L4 and AVCHD  
XVID, MPEG4 SP, ASP :  
Below 1280 x 720: 60 frame max  
Above 1280 x 720: 30 frame max  
-
.
Does not support GMC 2 or higher  
Audio decoder  
-
-
-
-
-
Supports WMA 7, 8, 9 and STD  
Does not support WMA 9 PRO multi-channel if number of channels is more than 2.  
Does not support WMA 9 Lossless, voice.  
Does not support WMA sampling rate of 220/50Hz mono  
Does not support APDCM MULAW, ALAW  
Music File Support  
File Extension  
*.mp3  
Container  
Audio Codec  
Support Range  
MP3  
-
MP3  
Compliant with WMA version 10  
*.wma  
WMA  
* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48  
* Bit rates - All bit-rates in the range 5kbps to 384kbps  
WMA  
English  
1ꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Logos of Discs the player can play  
Blu-ray Disc  
3D Blu-ray Disc  
DTS-HD Master Audio  
DivX  
Java  
NTSC broadcast system in  
BD-LIVE  
Dolby TrueHD  
U.S.A, Canada, Korea, Japan  
Accessories  
Check for the supplied accessories below.  
TV  
POWER  
POWER  
2D  
3D  
SOURCE  
1
4
2
3
6
5
8
0
7
9
SUBTITLE  
AUDIO  
DISC MENU  
TOOLS  
MENU  
TITLE MENU  
POPUP  
INFO  
RETURN  
EXIT  
SMART  
HUB  
SEARCH  
L  
79  
MUTE  
VOL  
CH  
Audio/Video cable  
(AK39-00148A)  
Adapter  
Remote Control  
(AK59-00122A)  
(AK44-00012A)  
Batteries for Remote Control  
(AAA Size) (AC43-12002H)  
User Manual  
Quick Guide  
(AK68-02030A)  
(AK68-01996E)  
NOTE  
Use only the audio/video cable that comes with this player.  
The signal from an external source may not output properly if you use another audio/video cable for the connection.  
If you lose this cable, visit the nearest Samsung service center to purchase a replacement cable.  
1ꢄ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel  
a
h g  
f e d c b  
DISC SLOT  
Inserts a disc.  
1
2
3
4
5
6
7
8
EJECT BUTTON  
ENTER BUTTON  
PLAY/PAUSE BUTTON  
STOP BUTTON  
DISPLAY  
Ejects a disc.  
Selects menu items or starts a disc.  
Plays a disc or pauses playback.  
Stops disc playback.  
Displays the playing status.  
Turns the player on and off.  
POWER BUTTON  
REMOTE CONTROL SENSOR Detects signals from the remote control.  
NOTE  
When the player displays the Blu-ray Disc menu, you may not start the movie by pressing the Play button on the player or  
the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the ENTER button.  
Do not place an object on the top of this player.  
Otherwise, the door on the top panel will open, which may cause damage to the player or a malfunction.  
English  
1ꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Rear Panel  
a b c d e f  
DIGITAL AUDIO OUT  
DC 12V  
AV OUT  
HDMI OUT  
OPTICAL  
LAN  
5V 500mA  
DC 12V  
Connects to power supply.  
1
2
3
4
You can connect a USB memory flash stick here and use it as storage when  
the player is connected to BD-LIVE. You can also use the USB Host for software  
upgrades and MP3/JPEG/DivX/MKV/MP4 playback.  
USB HOST  
A/V OUT  
Connects the input of external equipment using a audio/video cable.  
Using an HDMI cable, connect this HDMI output terminal to the HDMI input terminal  
on your TV for the best quality picture or to your AV receiver for the best quality  
sound.  
HDMI OUT  
DIGITAL AUDIO OUT  
LAN  
Connects to an AV receiver.  
5
Can be used for network based services (See pages 54~63), BD-LIVE and software  
upgrades using a network connection.  
6
NOTE  
You can only perform software upgrades using the USB Host jack with a USB memory flash stick.  
1ꢆ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
Tour of the Remote Control  
TV  
POWER  
POWER  
Turn the player on and off.  
Press to eject a disc.  
Turn the TV on and off.  
(To operate your TV, please refer to page 20)  
2D 3D  
SOURCE  
After setup, allows you to set the input  
source on your TV.  
Press to use the 3D function.  
1
4
2
5
8
0
3
6
Press numeric buttons to operate options.  
7
9
SUBTITLE  
AUDIO  
Use to access various audio functions on a  
disc (Blu-ray Disc/DVD).  
Press to switch the Blu-ray Disc/DVD’s  
subtitle language.  
Press to skip backwards or forwards.  
Press to search a disc backwards or  
forwards.  
Press to stop a disc.  
Use to enter the disc menu.  
Press to pause a disc.  
Press to play a disc.  
DISC MENU  
TOOLS  
MENU  
TITLE MENU  
POPUP  
Use to enter the popup menu/title menu.  
Press to move to the home menu.  
Press to use Tools menu.  
INFO  
Use to display the playback information  
during playing a Blu-ray Disc/DVDs.  
Use to select menu items and change  
menu value.  
RETURN  
EXIT  
Return to the previous menu.  
Press to exit the menu.  
These buttons are used both for menus  
on the player and also several Blu-ray Disc  
functions.  
Press to use Netflix.  
SMART  
HUB  
SEARCH  
Press to use Smart Hub.  
79  
Press to search contents.  
MUTE  
VOL  
CH  
TV volume adjustment.  
Use to select a TV channel.  
Mutes the speakers of your TV.  
NOTE  
Installing batteries  
If the remote does not operate properly:  
Check the polarity +/– of the batteries.  
Check if the batteries are drained.  
Check if the remote sensor is blocked by  
obstacles.  
Check if there is any fluorescent lighting nearby.  
CAUTION  
!
Dispose of batteries according to local environmental  
regulations. Do not put them in the household trash.  
English  
1ꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
TV Control Codes  
Setting the Remote Control to  
Operate Your TV  
Brand  
SAMSUNG  
AIWA  
Code  
Brand  
NOBLEX  
NOKIA  
Code  
TV POWER+66  
TV POWER+74  
You can control certain functions of your TV with  
this remote control.  
TV POWER+01, +02,  
+03, +04, +05,  
+06, +07, +08, +09  
Button  
Function  
TV POWER+72, +73,  
NORDMENDE  
PANASONIC  
PHILIPS  
+75  
TV POWER+82  
TV POWER  
Used to switch the television on and off.  
TV POWER+53, +54,  
+74, +75  
TV POWER+10, +11,  
Used to select an external source  
ANAM  
+12, +13, +14,  
TV SOURCE  
+15, +16, +17, +18  
TV POWER+06, +55,  
connected to the TV.  
+56, +57  
BANG & OLUFSEN TV POWER+57  
TV VOL (+/–) Used to adjust the volume of the television.  
TV POWER+06, +56,  
+57  
PHONOLA  
PIONEER  
BLAUPUNKT  
BRANDT  
BRIONVEGA  
CGE  
TV POWER+71  
TV POWER+73  
TV POWER+57  
TV POWER+52  
TV CH (  
/
)
Used to select the desired channel.  
Used to toggle the sound on and off.  
, .  
TV POWER+58, +59,  
+73, +74  
TV MUTE  
RADIOLA  
TV POWER+06, +56  
NOTE  
CONTINENTAL  
RADIOMARELLI TV POWER+57  
TV POWER+75  
EDISON  
The functions listed above will not necessarily work  
on all televisions. If you encounter problems, use the  
TV remote control.  
RCA  
REX  
TV POWER+45, +46  
TV POWER+74  
TV POWER+19, +20,  
+23, +24, +25,  
+26, +27, +28,  
+29, +30, +31,  
+32, +33, +34  
DAEWOO  
TV POWER+57, +72,  
SABA  
SALORA  
SANYO  
+73, +74, +75  
To determine whether your television is  
EMERSON  
FERGUSON  
TV POWER+64  
TV POWER+73  
TV POWER+74  
compatible, follow the instructions below.  
TV POWER+41, +42,  
1. Switch your television on.  
TV POWER+06, +49,  
FINLUX  
+43, +44, +48  
+57  
2. Point the remote control towards the  
FORMENTI  
FUJITSU  
GRADIENTE  
TV POWER+57  
TV POWER+84  
TV POWER+70  
SCHNEIDER  
SELECO  
TV POWER+06  
TV POWER+74  
television.  
3. Press and hold the TV POWER button, and  
then enter the two-figure code in the table  
to the right that corresponds to the brand of  
your television by pressing the appropriate  
number buttons.  
TV POWER+36, +37,  
SHARP  
+38, +39, +48  
TV POWER+49, +52,  
GRUNDIG  
+71  
SIEMENS  
SINGER  
SINUDYNE  
SONY  
TELEAVA  
TV POWER+71  
TV POWER+57  
TV POWER+57  
TV POWER+35, +48  
TV POWER+73  
TV POWER+60, +72,  
+73, +75  
HITACHI  
If your television is compatible with the remote  
control, it will switch off.  
IMPERIAL  
JVC  
TV POWER+52  
TV POWER+61, +79  
The remote is now programmed to operate  
TV POWER+06, +19,  
LG  
the TV.  
+20, +21, +22, +78  
TV POWER+67, +73,  
TELEFUNKEN  
+75, +76  
LOEWE  
TV POWER+06, +69  
NOTE  
TV POWER+72, +73,  
+75  
LOEWE OPTA TV POWER+06, +57  
THOMSON  
If several codes are listed for your television brand,  
MAGNAVOX  
METZ  
TV POWER+40  
TV POWER+57  
try each one in turn until you find one that works.  
THOMSON ASIA TV POWER+80, +81  
If you replace the remote control’s batteries, you  
TV POWER+47, +48,  
TOSHIBA  
TV POWER+06, +48,  
MITSUBISHI  
+49, +50, +51, +52  
must set the brand code again.  
+62, +65  
MIVAR  
NEC  
NEWSAN  
TV POWER+52, +77  
TV POWER+83  
TV POWER+68  
WEGA  
YOKO  
ZENITH  
TV POWER+57  
TV POWER+06  
TV POWER+63  
ꢀ0  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting to a TV  
Case 1 : Connecting to a TV with an HDMI Cable - Best Quality  
(Recommended)  
1. Using an HDMI cable, connect the HDMI OUT terminal on the player to the HDMI IN terminal of your  
TV.  
2. Turn on the player and TV.  
3. Press the input selector on your TV remote control until the HDMI signal from the player appears on  
your TV screen.  
If you have set the remote control to operate your TV (See page 20), press the TV SOURCE  
button on the remote control and select HDMI as the external source of the TV.  
DC 12V  
AV OUT  
HDM
5V 500mA  
HDMI cable  
(not included)  
NOTE  
An HDMI cable outputs digital video/audio, so you don’t need to connect an audio cable.  
If the player is connected to your TV in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed  
(category 2) HDMI cable.  
HDMI outputs only a pure digital signal to the TV.  
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.  
Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.  
When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI output  
resolution will be automatically set to the highest supported by the TV.  
You must have an HDMI connection to enjoy videos with 3D technology.  
A long HDMI cable may cause a screen noise. If this occurs, set Deep Color to Off in the menu.  
If you use HDMI-to-DVI cable to connect to your display device, you must also connect the AV Out or Digital Audio Out to  
your display device or an audio sytem to hear audio.  
English  
ꢀ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Case 2 : Connecting to a TV with an Audio/Video cable - Good Quality  
1. Using an Audio/Video cable, connect the A/V OUT (yellow) terminal on the player to the VIDEO IN  
(yellow) / AUDIO IN (red and white) terminals of your TV.  
2. Turn on the player and TV.  
3. Press the input selector on your TV remote control until the “VIDEO” signal from the player appears  
on the TV screen.  
If you have set the remote control to operate your TV (See page 20), press the TV SOURCE  
button on the remote control and select VIDEO as the external source of the TV.  
DC 12V  
AV OUT  
HDM
5V 500mA  
Audio/Video cable  
Red  
White Yellow  
NOTE  
Noise may be generated if the audio cable is placed too close to the power cable.  
If you want to connect to an AV receiver, please refer to the AV receiver connection pages. (See pages 23~24)  
The number and position of input terminals may vary depending on your TV set. Please refer to the user manual of your  
TV.  
CAUTION  
!
Do not connect the player to your TV through a VCR. Video signals fed through VCRs may be affected by copyright  
protection systems and the picture will be distorted on the television.  
ꢀꢀ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to an Audio System  
Please turn the volume down when you turn on the AV receiver. A sudden loud sound may cause  
damage to the speakers and your ears.  
Set the audio output format according to the capabilities of your AV receiver. (See pages 33~36)  
The position of HDMI input terminals may vary depending on your AV receiver. Please refer to the  
user manual of your AV receiver.  
Case 1 : Connecting to an Audio System (HDMI supported AV receiver)  
- Best Quality (Recommended)  
1. Using an HDMI cable, connect the HDMI OUT terminal on the player to the HDMI IN terminal of your  
AV receiver.  
2. Using an HDMI cable, connect the HDMI OUT terminal of the AV receiver to the HDMI IN terminal of  
your TV.  
3. Turn on the player, TV, and AV receiver.  
4. Press the input select button of the AV receiver to select the external input and hear sound from the  
player. Refer to your AV receiver’s user manual to set the AV receiver’s audio input.  
5. Press the input selector on your TV remote control until the HDMI signal from the player appears on  
your TV screen.  
DC 12V  
AV OUT  
HDM
5V 500mA  
HDMI cable  
(not included)  
HDMI cable  
(not included)  
English  
ꢀꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Case 2 : Connecting to an Audio  
System (AV receiver with Dolby Digital  
or DTS decoder) - Better Quality  
Case 3 : Connecting to an Audio System  
(Stereo Amplifier) - Good Quality  
1. Using the Audio/Video cable, connect the A/V  
OUT (yellow) terminal on the player to the  
AUDIO IN (red and white) terminals of your  
stereo using the red and white wires.  
1. Using an optical cable, connect the DIGITAL  
AUDIO OUT (OPTICAL) terminal on the  
player to the DIGITAL AUDIO IN (OPTICAL)  
terminal of your AV receiver.  
2. Using the video signal cable(s), connect the  
HDMI terminal on the player to the HDMI  
terminal on your TV or connect the yellow  
wire from the Audio/Video cable to the AV In  
terminal of your TV. (See pages 21~22)  
2. Using the video signal cable(s), connect the  
HDMI or A/V OUT terminal on the player to  
the HDMI or VIDEO IN terminal of your TV.  
(See pages 21~22)  
3. Turn on the player, TV and Stereo Amplifier.  
3. Turn on the player, TV, and AV receiver.  
4. Press the input select button of the Stereo  
Amplifier to select the external input in order  
to hear sound from the player. Refer to your  
Stereo Amplifier’s user manual to set the Stereo  
Amplifier’s audio input.  
4. Press the input select button of the AV receiver  
to select the external input and hear sound from  
the player. Refer to your AV receiver’s user  
manual to set the AV receiver’s audio input.  
5. Press the input selector on your TV remote control  
5. Press the input selector on your TV remote control  
to select the video source (HDMI or Video.)  
to select the video source (HDMI or Video.)  
DC 12V  
AV OUT  
HDM
5V 500mA  
Case 3 : Audio/  
Video cable  
Case 2 : Optical cable  
(not included)  
Red  
White  
NOTE  
If you use the Digital Audio connection described in Case 2, discs with PCM audio soundtracks will play through the  
front two speakers only.  
To connect to your TV using the Audio/Video cable, you may need to connect an extension cable to the yellow video wire.  
If you use an extension cable, the cable must have an RCA male plug on one end and an RCA female jack on the other.  
ꢀꢂ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to the Network  
This player lets you use network based services (See pages 54~63) such as Smart Hub and BD-LIVE,  
and download software upgrades when it is connected to a network. We recommend using an AP (Access  
Point) or IP router for the connection. For more information on router connections, refer to the user  
manual of the router or contact the router manufacturer for technical assistance.  
Cable Network  
1. Using a Direct LAN Cable (UTP cable), connect the LAN terminal of the player to the LAN terminal of  
your modem or router.  
2. To set the network options, see pages 36~40.  
DIGITAL AUDIO OUT  
Router  
Broadband modem  
(with integrated router)  
Broadband modem  
Or  
Broadband  
service  
Broadband  
service  
Networking with PC for  
AllShare function  
NOTE  
Internet access to Samsung’s software update server may not be allowed, depending on the router you use or your ISP’s  
policy. For more information, contact your ISP (Internet Service Provider).  
DSL users, please use a router to make a network connection.  
To use the AllShare function, you must connect your PC to your network as shown in the figure.  
The connection can be wired or wireless.  
English  
ꢀꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Wireless Network  
Your player has built in Wi-Fi capability. You can connect to a network through a Wireless IP sharer  
(a router or modem).  
To set the network options, see pages 36~40.  
Broadband  
service  
Wireless IP sharer  
Networking with PC for  
AllShare function  
NOTE  
To use a wireless network, your player must be connected to a wireless IP sharer (router). If the wireless IP sharer  
supports DHCP, your player can use a DHCP or static IP address to connect to the wireless network.  
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer  
is currently being used by another device nearby, this will result in interference and communication failure.  
If you select Pure High-throughput (Greenfield) 802.11n mode and set the Encryption type to WEP, TKIP or TKIP-  
AES (WPS2Mixed) on your AP, this player will not support the connection in compliance with new Wi-Fi certification  
specifications.  
If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration)  
or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.  
You can set up a wireless network three ways:  
-
-
-
Using Wireless (General)  
Using WPS(PBC)  
Using One Foot Connection  
Wireless (General) includes both Automatic and Manual setup procedures.  
Wireless LAN, by its nature, may cause interference, depending on the operating conditions (AP performance, distance,  
obstacles, interference by other radio devices, etc).  
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.  
The player supports only the following wireless security key protocols :  
-
WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)  
To use the AllShare function, you must connect your PC to your network as shown in the figure.  
The connection can be wired or wireless.  
ꢀꢄ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Home Menu  
Initial Settings  
1. Turn on your TV after connecting the player.  
When you connect the player to a TV for the  
first time, player turns on automatically and  
the Initial Settings screen appears.  
My Contents  
Videos  
Photos  
Music  
My Devices  
Internet  
Settings  
Initial Settings | On-Screen Language  
Select a language for the on-screen displays.  
Български  
Dansk  
Hrvatski  
Nederlands  
Suomi  
Čeština  
English  
Français  
Magyar  
한국어  
d
WPS(PBC)  
Eesti keel  
Deutsch  
Indonesia  
Ελληνικά  
Italiano  
NOTE  
m
Move  
"
Enter  
When the player is connected to the TV for the first  
time, the player turns on automatically. This is not a  
malfunction.  
The Home menu will not appear if you do not  
2. Press the ▲▼◄► buttons to select the  
desired language, and then press the ENTER  
button.  
configure the initial settings except as noted below.  
If you press the BLUE (D) button during the network  
setup, you can access the Home menu even if the  
network setup is not completed yet.  
3. Press the ENTER button to select Start.  
4. Press the ▲▼ buttons to select the desired  
TV Aspect Ratio, and then press the ENTER  
button. (See page 30)  
If you want to display the Initial Setting screen again  
to make changes, select the Reset option. (See page  
41)  
5. Press the ▲▼ buttons to select the desired  
If you use an HDMI cable to connect the player to an  
Anynet+(HDMI-CEC)-compliant Samsung TV and  
1.) You have set the Anynet+(HDMI-CEC) feature  
to On in both the TV and the player and 2.) You have  
set the TV to a language supported by the player,  
the player will select that language as the preferred  
language automatically.  
Network Settings : Wired, Wireless  
(General), WPS(PBC) or One Foot  
Connection, and then press the ENTER  
button. If you do not know the details of your  
Network Settings, press the BLUE (D) button  
on your remote instead to skip Network  
Settings here, finish the Initial Settings, and go  
to the Home menu.  
If you leave the player in the stop mode for more  
than 5 minutes without using it, a screen saver will  
appear on your TV. If the player is left in the screen  
saver mode for more than 20 minutes, the power  
will automatically turn off.  
If you selected a Network Setting, go to  
pages 36~40 for more information about the  
Network settings. When done, go to Step 6.  
6. The Home menu appears. (For more  
information about the Home menu, please  
see page 28.)  
English  
ꢀꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
2. Press the ◄► buttons to select Settings,  
Accessing the Settings Menu  
and then press the ENTER button.  
DISC MENU  
MENU  
TITLE MENU  
3. Press the ▲▼ buttons to select the desired  
POPUP  
1
submenu, and then press the ENTER button.  
TOOLS  
INFO  
4. Press the ▲▼ buttons to select the desired  
item, and then press the ENTER button.  
3
4
5. Press the EXIT button to exit the menu.  
RETURN  
EXIT  
NOTE  
2
When the player is connected to a network, select  
Smart Hub from the Home menu.  
MENU Button : Press to move to the Home menu.  
1
2
Download the desired content from Samsung Apps.  
(See pages 61~63)  
RETURN Button : Return to the previous menu.  
The access steps may differ depending on the menu  
ENTER / DIRECTION Button :  
Move the cursor or select an item.  
Activate the currently selected item.  
Confirm a setting.  
EXIT Button : Press to exit the current menu.  
you selected.  
3
4
The OSD (On Screen Display) may change in this  
player after you upgrade the software version.  
Settings menu  
Settings  
To access the Settings menu and sub-menus,  
Display  
Audio  
3D Settings  
follow these steps:  
3D Settings  
1. Press the POWER button.  
Network  
3D Blu-ray Playback Mode : Auto  
System  
The Home Menu appears.  
Screen Size  
:
55 inch  
Languag
Security  
General  
Support  
Home Menu  
>
Move  
"
Enter  
'
Return  
My Contents  
Videos  
Photos  
Music  
2
3
Above : The Settings menu showing the 3D  
Settings sub-menu.  
My Devices  
Internet  
Settings  
The following menu items are on the Settings  
1
4
5
Menu :  
d
WPS(PBC)  
Display  
Audio  
Network  
System  
Language  
Security  
General  
Support  
Selects My Devices.  
Selects My Contents.  
Selects Internet.  
Selects Settings.  
Displays the buttons available.  
1
2
3
4
5
The menu items are addressed in the order  
listed above on the following pages, starting with  
Display.  
ꢀꢆ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display  
Screen Size  
Lets you enter the actual screen size of your TV so  
that the player can adjust the image according to  
the screen size and display an optimal 3D image.  
(For 3D displays bigger than 116 inches, setting  
screen size to 116 is a safe choice.)  
You can configure various display options such as  
the TV Aspect Ratio, Resolution, etc.  
3D Settings  
CAUTION  
Select whether to play a Blu-ray Disc with 3D  
contents in 3D Mode.  
!
If you want to enjoy 3D content, connect a 3D device  
(3D compliant AV receiver or TV) to the player’s  
HDMI OUT port using a high-speed HDMI cable. Put  
on 3D glasses before playing the 3D content.  
Settings  
Display  
Audio  
3D Settings  
The player outputs 3D signals only through HDMI  
cable connected to the HDMI OUT port.  
3D Settings  
Network  
System  
Languag
Security  
General  
Support  
3D Blu-ray Playback Mode : Auto  
Screen Size  
:
55 inch  
As the video resolution in 3D play mode is fixed  
according to the resolution of the original 3D  
video, you can not change the resolution to your  
preference.  
>
Move  
"
Enter  
'
Return  
Some functions such as BD Wise, screen size  
adjustment, and resolution adjustment may not  
operate properly in 3D play mode.  
3D Blu-ray Playback Mode  
You must use a high-speed HDMI cable for proper  
output of the 3D signal.  
3D Blu-ray Discs are available in two formats: Blu-  
ray 3D and 3D only. You can choose to watch a  
Blu-ray 3D disc in 3D or 2D mode before playing  
the disc.  
Stay at least three times the width of the screen from  
the TV when watching 3D images. For example, if  
you have a 46 inch screen, stay 138 inches (11.5  
feet) from the screen.  
Auto : Automatically detect if a connected TV  
has 3D capability and play a Blu-ray 3D disc in  
3D or 2D accordingly or a 3D only disc in 3D if  
the TV supports 3D.  
-
Place the 3D video screen at eye level for the  
best 3D picture.  
When the player is connected to some 3D devices,  
the 3D effect may not function properly.  
3D only discs will not be played if your TV does  
not support 3D.  
“Blu-ray 3D” and “Blu-ray 3D” logo are trademarks  
of the Blu-ray Disc Association.  
3D 3D : Play 3D only and Blu-ray 3D discs in  
3D mode at all times.  
3D 2D : Play Blu-ray 3D discs in 2D mode at  
all times. 3D only discs will not be played.  
NOTE  
For some 3D discs, to stop a movie during 3D  
playback, press the STOP (  
) button once. The  
movie stops and the 3D mode option is de-activated.  
To change a 3D option selection when you are  
playing a 3D movie, press the STOP (  
) button  
once. The Blu-ray menu appears. Press the STOP  
(
) button again, then select 3D Settings in the  
Blu-ray menu.  
Depending on the content and the position of the  
picture on your TV screen, you may see vertical  
black bars on the left side, right side, or both sides.  
English  
ꢀꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
TV Aspect (Picture Size and Format) BD Wise (Samsung Players only)  
Depending on the type of television you have, you  
BD Wise is Samsung’s latest inter-connectivity  
feature.  
may want to adjust the screen size setting.  
When you connect a Samsung player and a  
Samsung TV with BD Wise to each other via  
HDMI, and BD Wise is on in both the player and  
TV, the player outputs video at the video resolution  
and frame rate of the Blu-ray Disc/DVDs.  
16:9 Original : Select when you connect the  
player to a 16:9 TV screen. The player will  
display all content in its original aspect ratio.  
Content formatted in 4:3 will be displayed with  
black bars on the left and right.  
Off : The output resolution stays fixed at the  
resolution you set previously in the Resolution  
menu, regardless of the resolution of the disc.  
See Resolution below.  
16:9 Full : Select when you connect the player  
to a 16:9 TV screen. All content will fill the  
full screen. Content formatted in 4:3 will be  
stretched.  
On : The player outputs video at the original  
resolution and frame rate of the Blu-ray Disc/  
DVDs.  
4:3 Letter Box : Select when you connect the  
player to a 4:3 TV screen. The player will display  
all content in its original aspect ratio. Content  
formatted in 16:9 will be displayed with black  
bars on the top and bottom.  
NOTE  
When BD Wise is on, the Resolution setting  
automatically defaults to BD Wise and BD Wise  
appears in the Resolution menu.  
4:3 Pan-Scan : Select when you connect the  
player to a 4:3 TV screen. 16:9 content will have  
the extreme left and right portions cut off.  
If the player is connected to a device that does not  
support BD Wise, you can not use the BD Wise  
function.  
NOTE  
Depending on the disc type, some aspect ratios may  
not be available.  
For proper operation of BD Wise, set the BD Wise  
If you select an aspect ratio and option which is  
different than the aspect ratio of your TV screen,  
then the picture might appear to be distorted.  
menu of both the player and the TV to On.  
Resolution  
If you select the 16:9 Original, your TV may display  
Lets you set the output resolution of the HDMI  
video signal to Auto, 1080p, 1080i, 720p, 480p,  
or 480i. The number indicates the number of lines  
of video per frame. The i and p indicate interlaced  
and progressive scan, respectively. The more  
lines, the higher the quality.  
4:3 Pillarbox (black bars on sides of picture).  
Smart Hub Screen Size  
Set the Smart Hub Screen to the optimal size.  
Size 1 : Smart Hub screen size will be smaller  
than default. You may see some black on sides  
of screen.  
Auto : Automatically sets the output resolution  
to the connected TV’s maximum resolution.  
BD Wise : Automatically sets the resolution to  
the resolution of the Blu-ray Disc/DVDs if you  
have connected the player via HDMI to a TV  
with the BD Wise feature. (The BD Wise menu  
item appears only if BD Wise is set to On. See  
BD Wise above.)  
Size 2 : This is the default setting for Smart  
Hub. The player displays the normal Smart Hub  
screen size.  
Size 3 : This will display a larger Smart Hub  
screen size. The image may be too large for  
your TV screen.  
1080p : Outputs 1080 lines of progressive  
video.  
1080i : Outputs 1080 lines of interlaced video.  
720p : Outputs 720 lines of progressive video.  
480p : Outputs 480 lines of progressive video.  
480i : Outputs 480 lines of interlaced video.  
ꢁ0  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Resolution according to the output mode  
Blu-ray Disc/E-contents/Digital Contents playback  
HDMI / connected  
HDMI / not connected  
VIDEO Mode  
HDMI Mode  
Output  
Setup  
VIDEO Mode  
E-contents/Digital  
Blu-ray Disc  
contents  
Resolution of Blu-ray  
BD Wise  
1080p@60F  
480i  
480i  
-
-
Disc  
Max. Resolution of TV Max. Resolution of TV  
Auto  
input  
1080p@60F  
1080p@24F  
1080i  
input  
1080p@60F  
1080p@24F  
1080i  
1080p@60F  
Movie Frame : Auto (24Fs)  
480i  
480i  
480i  
480i  
480i  
-
-
-
1080i  
720p  
480p  
480i  
480i  
480i  
480i  
480i  
720p  
720p  
480p  
480p  
-
-
DVD playback  
HDMI / connected  
HDMI / not connected  
Output  
Setup  
HDMI Mode  
VIDEO Mode  
VIDEO Mode  
BD Wise  
Auto  
480i  
480i  
480i  
480i  
480i  
480i  
480i  
-
-
Max. Resolution of TV input  
-
1080p@60F  
1080i  
1080p@60F  
1080i  
720p  
-
480i  
480i  
480i  
480i  
720p  
480p  
480p  
-
480i  
English  
ꢁ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
NOTE  
HDMI Color Format  
If the TV you connected to the player does not  
Lets you set the color space format for HDMI  
output to match the capabilities of the connected  
device (TV, monitor, etc).  
support Movie Frame or the resolution you selected,  
the message “If no pictures are shown after  
selecting ‘Yes’, please wait for 15 seconds to return  
to the previous resolution. Do you want to change  
the resolution?” appears.  
Auto : Automatically sets the player to the  
optimum format supported by your device.  
YCbCr (4:4:4) : If your TV supports the YCbCr  
color space via HDMI, select this to output the  
normal YCbCr color gamut.  
If you select Yes, the TV’s screen will go blank for  
15 seconds, and then the resolution will revert to the  
previous resolution automatically.  
RGB (Standard) : Select this to output the  
If the screen stays blank after you have changed the  
normal RGB color gamut.  
resolution, remove all discs, and then press and hold  
RGB (Enhanced) : If you have connected the  
player to a DVI display device such as a monitor,  
select this to output the enhanced RGB color  
gamut.  
the STOP (  
) button on the front of the player for  
more than 5 seconds. All settings are restored to the  
factory default. Follow the steps on the previous page  
to access each mode and select the Display Setup  
that your TV will support.  
When the factory default settings are restored, all  
Movie Frame (24Fs)  
stored user BD data is deleted.  
Setting the Movie Frame (24Fs) feature to Auto  
allows you to adjust the player’s HDMI output to  
24 frames per second for improved picture quality.  
You can enjoy the Movie Frame (24Fs) feature only  
on a TV supporting this frame rate. You can select  
Movie Frame only when the player is in the HDMI  
1080i or 1080p resolution output modes.  
The Blu-ray Disc must have the 24 frame feature for  
the player to use the Movie Frame (24Fs) mode.  
Auto : Movie Frame (24Fs) functions work.  
Off : Movie Frame (24Fs) functions are off.  
ꢁꢀ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio  
HDMI Deep Color  
Lets you output video from the HDMI OUT jack  
with Deep Color. Deep Color provides more  
accurate color reproduction with greater color  
depth.  
Digital Output  
You set the Digital Output to match the capabilities  
of the AV receiver you’ve connected to the player :  
Auto : The player outputs video with Deep Color  
to a connected TV which supports HDMI Deep  
Color.  
PCM : Choose if you have connected an HDMI  
supported AV receiver.  
Bitstream (Unprocessed) : Select if you have  
connected an HDMI supported AV receiver  
with Dolby TrueHD and DTS-HD Master Audio  
decoding capabilities.  
Off : The picture is output without Deep Color.  
Still Mode  
Bitstream (Re-encoded DTS) : Choose if you  
have connected an AV receiver using a Digital  
Optical input that can decode DTS.  
Lets you set the type of picture the player displays  
when you pause DVD playback.  
Auto : Automatically shows the best still picture  
Bitstream (Re-encoded Dolby D) : Select if  
you don’t have an HDMI supported AV receiver,  
but have an AV receiver with Dolby Digital  
decoding capabilities.  
depending on the content.  
Frame : Select when pausing a scene with a  
little action.  
Field : Select when pausing a scene with a lot  
For more details, please refer to the digital output  
selection table. (See pages 34~35)  
of action.  
Progressive Mode  
Lets you improve picture quality when viewing  
DVDs.  
Auto : Select to have the player automatically  
select the best picture quality for the DVD you’re  
watching.  
Video : Select for the best picture quality from  
concert or TV show DVDs.  
English  
ꢁꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Digital Output Selection  
Bitstream  
(Re-encoded  
DTS)  
Bitstream  
(Re-encoded  
Dolby D)  
Bitstream  
Setup  
PCM  
(Unprocessed)  
HDMI  
HDMI  
HDMI supported HDMI supported  
Connection  
supported  
Optical  
supported  
Optical  
AV receiver or  
AV receiver or  
AV receiver  
AV receiver  
Optical  
Optical  
Up to PCM  
Re-encoded  
PCM  
Dolby Digital  
PCM 2ch  
PCM  
PCM 2ch DTS re-encoded  
7.1ch  
Dolby Digital *  
Up to PCM  
7.1ch  
Re-encoded  
PCM 2ch Dolby Digital Dolby Digital DTS re-encoded  
Dolby Digital  
Dolby Digital *  
Dolby Digital Up to PCM  
Re-encoded  
PCM 2ch  
Dolby Digital DTS re-encoded  
Plus  
Dolby TrueHD  
7.1ch  
Plus  
Dolby Digital *  
Audio Stream  
on Blu-ray  
Disc  
Up to PCM  
7.1ch  
Re-encoded  
PCM 2ch Dolby TrueHD Dolby Digital DTS re-encoded  
Dolby Digital *  
Up to PCM  
Re-encoded  
DTS  
PCM 2ch  
DTS  
DTS  
DTS  
DTS re-encoded  
DTS re-encoded  
6.1ch  
Dolby Digital *  
DTS-HD High  
Resolution  
Audio  
DTS-HD High  
Up to PCM  
7.1ch  
Up to PCM  
Re-encoded  
PCM 2ch Resolution  
Audio  
Dolby Digital *  
DTS-HD  
DTS-HD  
Re-encoded  
PCM 2ch  
PCM 2ch  
DTS  
DTS re-encoded  
PCM 2ch  
PCM 2ch Dolby Digital Dolby Digital Dolby Digital  
Master Audio  
7.1ch  
Master Audio  
Dolby Digital *  
PCM  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
Up to PCM  
5.1ch  
Audio Stream Dolby Digital  
Dolby Digital  
on DVD  
Up to PCM  
6.1ch  
DTS  
PCM 2ch  
DTS  
DTS  
DTS  
DTS  
Decodes the main  
Decodes main  
feature audio and  
feature audio and  
Outputs only the main  
BONUSVIEW audio BONUSVIEW audio  
Decodes the main feature feature audio stream so that  
audio and BONUSVIEW your AV receiver can decode  
stream together  
stream together  
Definition for  
Any  
into PCM audio and  
into PCM audio  
audio stream together  
into PCM audio and adds  
Navigation Sound Effects.  
the audio bitstream.  
You will not hear  
adds Navigation and add Navigation  
Blu-ray Disc  
Sound Effects, then Sound Effects, then  
BONUSVIEW audio or  
Navigation Sound Effects.  
re-encodes the  
reencodes the PCM  
digital bitstream.  
PCM audio into DTS audio into Dolby  
bitstream.  
* If the Source Stream is 2ch or mono, “Re-encoded Dolby D” Setting are not applied. Output will be  
PCM 2ch.  
Blu-ray Discs may include three audio streams :  
-
-
-
Main Feature Audio : The audio soundtrack of the main feature.  
BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.  
Navigation Sound Effects : When you choose some menu navigation, Navigation Sound Effects may  
sound. Navigation Sound Effects are different on each Blu-ray Disc.  
ꢁꢂ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE  
Dynamic Range Control  
Be sure to select the correct Digital Output or you  
You can listen at low volumes, but still hear dialog  
will hear no sound or just loud noise.  
clearly.  
If the HDMI device (AV receiver, TV) is not compatible  
with compressed formats (Dolby digital, DTS), the  
audio signal outputs as PCM.  
This is only active if your player detects a Dolby  
Digital signal.  
Auto : The Dynamic Range Control will be set  
automatically based on the information provided  
by the Dolby TrueHD Soundtrack.  
Regular DVDs do not have BONUSVIEW audio and  
Navigation Sound Effects.  
Some Blu-ray Discs do not have BONUSVIEW audio  
and Navigation Sound Effects.  
Off : You can enjoy the movie with the standard  
Dynamic Range.  
On : When Movie soundtracks are played at low  
volume or through smaller speakers, the system  
can apply appropriate compression to make  
low-level content more intelligible and prevent  
dramatic passages from getting too loud.  
This Digital Output setup does not effect the analog  
(L/R) audio or HDMI audio output to your TV.  
It effects the optical and HDMI audio output when  
your player is connected to an AV receiver.  
If you play MPEG audio soundtracks, the audio signal  
outputs as PCM regardless of your Digital Output  
selections (PCM or Bitstream).  
Downmixing Mode  
Lets you select how the player will downmix multi-  
channel audio into fewer channels.  
PCM Downsampling  
Normal Stereo : Downmixes the multi-channel  
audio into two channel stereo. Choose when  
connected to equipment that does not support  
virtual surround functions such as Dolby Pro  
Logic.  
Lets you set 48kHz and 96kHz PCM down-  
sampling on or off.  
Off : Select when the AV receiver connected to  
the player is 96kHz compatible.  
On : Select when the AV receiver connected  
to the player is not 96kHz compatible. 96kHz  
signals will be down converted to 48kHz.  
Surround Compatible : Downmixes multi-  
channel audio into surround compatible stereo.  
Choose when connected to equipment that  
supports virtual surround functions such as  
Dolby Pro Logic.  
NOTE  
Even when PCM Downsampling is set to Off, some  
discs will only output downsampled audio through  
the optical digital outputs.  
DTS Neo:6 Mode  
You can enjoy multi-channel sound from an Audio  
CD (CD-DA).  
HDMI  
If your TV is not compatible with compressed  
multi-channel formats (Dolby Digital, DTS), the  
player may output PCM 2ch downmixed audio  
even though you selected Bitstream (either Re-  
encoded or Unprocessed) in the setup menu.  
Off : Outputs a 2-channel audio signal through  
the front speakers only.  
Cinema : Select to play 2-channel movie sound  
over multi-channels.  
Music : Select to play 2-channel music over  
If your TV is not compatible with PCM sampling  
rates over 48kHz, the player may output 48kHz  
downsampled PCM audio even though you set  
PCM Downsampling to Off.  
multi-channels.  
NOTE  
If you are using an HDMI supported AV receiver, this  
option is available when you set Digital Output setup  
as PCM.  
English  
ꢁꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Wired Network  
Audio Sync  
In some cases when the player is connected to a  
digital TV, the audio signal may not synchronize  
with the video signal. If this occurs, adjust the  
audio delay time to match the video signal.  
Setting Up a Wired Connection - Auto  
1. Press the ▲▼ buttons to select Wired.  
You can set the audio delay time between 0  
msec and 200 msec.  
Settings  
Network Settings  
Display  
Audio  
Adjust it to the optimal setting.  
Select a network connection type.  
Wired  
Network  
System  
Languag
Security  
General  
Support  
NOTE  
Wireless  
(General)  
The audio delay time you specify may not be exact  
depending on the played content.  
Connect to the network using LAN cable. Please make  
WPS(PBC)  
sure that the LAN cable is connected.  
One Foot  
Connection  
>
Move  
"
Enter  
'
Return  
Network  
Before you begin, contact your ISP to find out  
if your IP address is static or dynamic. If it is  
dynamic, and you are using a wired or wireless  
connection, we recommend using the Auto setup.  
If you are using a wireless connection and your  
router has the capability, you can use WPS(PBC)  
or One Foot Connection.  
2. Press the ENTER button.  
The Network Status screen appears. The  
player connects to the network after the  
network connection is verified.  
Setting Up a Wired Connection - Manual  
If your IP address is static, you must use the  
manual set up procedure for both wired and  
wireless connections.  
If you have a static IP address or the Auto Setting  
does not work, you’ll need to set the Network  
Settings values manually.  
To view your Network Settings values on most  
Windows computers, follow these steps:  
Network Settings  
Windows XP  
.
To begin setting up the network connection for  
your player, follow these steps:  
1. Right click the Network icon on the bottom  
right of the Windows desktop.  
1. In the Home menu, press the ◄► buttons to  
select Settings, and then press the ENTER  
button.  
2. In the pop-up menu, click Status.  
3. On the dialog that appears, click the Support  
2. Press the ▲▼ buttons to select Network, and  
tab.  
then press the ENTER button.  
4. On the Support tab, click the Details button.  
3. Press the ▲▼ buttons to select Network  
The Network settings are displayed.  
Settings, and then press the ENTER button.  
Windows 7  
.
4. Press the ▲▼ buttons to select Wired,  
Wireless (General), WPS(PBC) or One Foot  
Connection, and then press the ENTER  
button.  
1. Click the Network icon on the bottom right of  
the Windows desktop.  
2. In the pop-up menu, click Network and  
Sharing Center.  
5. If you have a wired network, go to the next  
section, Wired Network below. If you have a  
wireless network, go to Wireless Network on  
pages 37~39.  
ꢁꢄ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. On the dialog that appears, click Local Area  
Connection or Wireless Network Connection  
depending on your network connection.  
10. Press the ▼ button to go to DNS Mode.  
11. Press the ▼ button to go to the first DNS  
entry field. Enter the numbers as above.  
4. On the Support tab, click the Details button.  
12. Press the ENTER button to select OK.  
The Network Status screen appears. The  
player connects to the network after the  
network connection is verified.  
The Network settings are displayed.  
NOTE  
Depending on your Windows version, the information  
may differ.  
Wireless Network  
To enter the Network settings into your player,  
You can setup a wireless network three ways:  
follow these steps:  
Wireless (General)  
Using WPS(PBC)  
One Foot Connection  
1. Press the ▲▼ buttons to select Wired, and  
then press the ENTER button.  
2. Press the ◄► buttons to select IP Settings,  
Wireless (General) includes both Automatic and  
Manual setup procedures.  
and then press the ENTER button.  
3. On the Network Status screen, select Cancel,  
and then press Enter.  
Setting Up the Wireless Network Connection  
- Auto  
Settings  
Most wireless networks have an optional security  
system that requires devices that access the  
network to transmit an encrypted security code  
called an Access or Security Key. The Security  
Key is based on a Pass Phrase, typically a word  
or a series of letters and numbers of a specified  
length you were asked to enter when you set up  
security for your wireless network. If you use this  
method of setting up the network connection, and  
have a Security Key for your wireless network, you  
will have to enter the Pass Phrase during the Auto  
setup process.  
IP Settings  
0
Display  
Audio  
IP Mode  
Manual  
IP Address  
0
0
0
0
0
0
0
0
0
Network  
System  
Languag
Security  
General  
Support  
.
.
.
.
.
.
.
Subnet Mask  
Gateway  
0
0
.
.
DNS Mode  
DNS Server  
Manual  
0
0
0
0
.
.
.
OK  
>
Move  
"
Enter  
'
Return  
4. Press the ENTER button to select IP Mode.  
5. Press the ▲▼ buttons to select Manual, and  
1. Press the ▲▼ buttons to select Wireless  
then press the ENTER button.  
(General).  
6. Press the ▼ button to go to the first entry field  
(IP Address).  
Settings  
7. Use the number buttons on your remote to  
Network Settings  
Di
Select a network connection type.  
enter numbers.  
Au
Ne
8. When done with each field, press the ►  
button to move successively to the next field.  
You can also use the other arrow buttons to  
move up, down, and back.  
Wired  
Sy
Wireless  
(General)  
La
Se
Ge
Set up wireless network by selecting your Wireless  
Router. You may need to enter security key depending  
on the setting of the Wireless Router.  
WPS(PBC)  
One Foot  
Connection  
Su
9. Enter the IP Address, Subnet Mask, and  
>
Move  
"
Enter  
'
Return  
Gateway values.  
2. Press the ENTER button.  
When done, it displays a list of the available  
networks.  
English  
ꢁꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
3. Press the ▲▼ buttons to select the desired  
network, and then press the ENTER button.  
The Security screen appears.  
Windows 7  
.
1. Click the Network icon on the bottom right of  
the Windows desktop.  
4. On the Security screen, enter your network’s  
Pass Phrase. Enter numbers directly using your  
remote control.  
2. In the pop-up menu, click Network and  
Sharing Center.  
3. On the dialog that appears, click Local Area  
Connection or Wireless Network Connection  
depending on your network connection.  
To select a letter, press the ▲▼◄► buttons to  
move the cursor, then press the ENTER button.  
4. On the Support tab, click the Details button.  
Settings  
The Network settings are displayed.  
Display  
Audio  
Network Settings  
Enter security key.  
0 entered  
NOTE  
Network  
System  
Languag
Security  
General  
Support  
a
g
b
h
n
t
c
i
d
j
e
k
f
l
1
4
7
y
2
3
6
9
0
Depending on your Windows version, the information  
5
8
z
may differ.  
m
s
o
u
p
v
q
r
x
w
a/A  
Delete  
Space  
Done  
To enter the Network settings into your player,  
*
a
Previous  
m
Move  
"
Enter  
'
Return  
follow these steps:  
1. Follow Steps 1 through 4 in the ‘Setting Up  
the Wireless Network Connection - Auto’  
procedure.  
NOTE  
2. When done, press the GREEN (B) button on  
your remote, or press the ▲▼◄► buttons to  
move the cursor to Done, and then press the  
ENTER button. The Network Status screen  
appears.  
You should be able to find the Pass Phrase on one of  
the set up screens you used to set up your router or  
modem.  
5. When done, press the GREEN (B) button on  
your remote, or press the ▲▼◄► buttons to  
move the cursor to Done, and then press the  
ENTER button.  
Settings  
IP Settings  
0
Display  
Audio  
The Network Status screen appears. The  
player connects to the network after the  
network connection is verified.  
IP Mode  
Manual  
IP Address  
0
0
0
0
0
0
0
0
0
Network  
System  
Languag
Security  
General  
Support  
.
.
.
.
.
.
.
Subnet Mask  
Gateway  
0
0
.
.
DNS Mode  
DNS Server  
Manual  
Setting Up the Wireless Network Connection  
0
0
0
0
.
.
.
- Manual  
OK  
>
Move  
"
Enter  
'
Return  
If the Auto Setting does not work, you need to  
enter the Network setting values manually.  
To view the Network Settings values on most  
Windows computers, follow these steps:  
3. On the Network Status screen, select Cancel,  
and then press Enter.  
Windows XP  
.
4. Press the ◄► buttons to select IP Settings,  
1. Right click the Network icon on the bottom  
and then press the ENTER button.  
right of the Windows desktop.  
5. Press the ENTER button to select IP Mode.  
2. In the pop-up menu, click Status.  
6. Press the ▲▼ buttons to select Manual, and  
3. On the dialog that appears, click the Support  
then press the ENTER button.  
tab.  
7. Press the ▼ button to go to the first entry field  
4. On the Support tab, click the Details button.  
(IP Address).  
The Network settings are displayed.  
ꢁꢆ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Use the number buttons to enter numbers.  
One Foot Connection  
9. When done with each field, press the ►  
button to move successively to the next field.  
You can also use the other arrow buttons to  
move up, down, and back.  
You can set up the wireless connection  
automatically if you have a Samsung Wireless  
Router which supports One Foot Connection. To  
connect using the One Foot Connection function,  
follow these steps:  
10. Enter the IP Address, Subnet Mask, and  
Gateway values.  
1. Press the ▲▼ buttons to select One Foot  
11. Press the ▼ to go to DNS Mode.  
Connection.  
12. Press the ▼ button to go to the first DNS  
entry field. Enter the numbers as above.  
Settings  
Network Settings  
13. Press the OK button.  
Di
Select a network connection type.  
Au
14. The Network Status screen appears. The  
player connects to the network after the  
network connection is verified.  
Ne
Wired  
Sy
Wireless  
(General)  
La
Se
Ge
Connect to wireless network automatically if your  
Wireless Router supports One Foot Connection. Select  
this connection type after placing the Wireless Router  
within 10 inches(25cm) of product.  
WPS(PBC)  
One Foot  
WPS(PBC)  
Connection  
Su
>
Move  
"
Enter  
'
Return  
The easiest way to set up the wireless network  
connection is using the WPS(PBC) function or the  
One Foot Connection function.  
2. Press the ENTER button.  
If your wireless router has a WPS(PBC) button,  
follow these steps:  
3. Place the Samsung Wireless Router within 25  
cm (10 inches) of your player to connect.  
1. Press the ▲▼ buttons to select WPS(PBC).  
4. Wait until the connection is automatically  
established.  
Settings  
Network Settings  
Di
Select a network connection type.  
Au
Ne
Network Status  
Wired  
Sy
Wireless  
(General)  
La
Se
Ge
Connect to the Wireless Router easily by pressing the  
WPS(PBC) button. Choose this if your Wireless Router  
supports Push Button Configuration(PBC).  
Check whether a connection to the network and  
the Internet have been established.  
WPS(PBC)  
One Foot  
Connection  
Su
>
Move  
"
Enter  
'
Return  
S
Network Status  
Di
Au
MAC Address  
IP Address  
Subnet Mask  
Gateway  
XX:XX:XX:XX:XX:XX  
0.0.0.0  
0.0.0.0  
Ne
Sy
2. Press the ENTER button.  
KT_WLAN  
0.0.0.0  
DNS Server  
0.0.0.0  
3. Press the WPS(PBC) button on your router  
within two minutes. Your player automatically  
acquires all the network settings values it  
needs and connects to your network.  
LaIn  
te  
rnet is connected successfully.  
If you have a problem using any Internet services, contact your Internet service  
Se
provider.  
Ge
Su
Network Settings  
IP Settings  
Retry  
OK  
<
Move  
"
Enter  
'
Return  
4. The Network Status screen appears. The  
player connects to the network after the  
network connection is verified.  
English  
ꢁꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
NOTE  
BD-LIVE Internet Connection  
This function is not available if the HDMI cable does  
Set to allow or prohibit an Internet connection  
not support CEC.  
when you use the BD-LIVE service.  
If your Samsung TV has an Anynet+ logo, then it  
Allow (All) : The Internet connection is allowed  
supports the Anynet+ function.  
for all BD-LIVE contents.  
Depending on your TV, certain HDMI output  
resolutions may not work.  
Allow (Valid Only) : The Internet connection is  
allowed only for BD-LIVE contents containing a  
valid certificate.  
Please refer to the user manual of your TV.  
Prohibit : No Internet connection is allowed for  
any BD-LIVE content.  
BD Data Management  
NOTE  
Lets you manage the downloaded contents you  
accessed through a Blu-ray Disc that supports the  
BD-LIVE service and stored on an attached Flash  
memory device.  
What is a valid certificate?  
When the player uses BD-LIVE to send the disc data  
and a request to the server to certify the disc, the  
server uses the transmitted data to check if the disc is  
valid and sends the certificate back to the player.  
You can check the device’s information including  
the storage size, delete the BD data, or change  
the Flash memory device.  
The Internet connection may be restricted while you  
are using BD-LIVE contents.  
Change Device allows you to select either the  
player’s Internal Memory or External Memory  
(connected USB Device).  
System  
If the data to be stored from BD-LIVE is greater  
than the size of the remaining memory or the  
Internal Memory is full, connect an External USB  
device, then select External Device in the menu.  
Initial Settings  
By using the Initial Settings function, you can set  
the language, Network Settings, etc.  
BD Data Management Screen Information :  
For more information about the Initial Settings  
function, refer to the Initial Settings section of this  
user manual. (See pages 27~44)  
Current Device : Display the current connected  
device.  
Total Size : Total memory size of the device.  
Available Size : Available memory in the device.  
Delete BD data : Delete all BD data from the  
storage.  
Anynet+(HDMI-CEC)  
Anynet+ is a convenient function that offers linked  
operations with other Samsung players that have  
the Anynet+ feature.  
Select Device : Change the storage location  
of BD data. Select Internal Memory or External  
Memory.  
To operate this function, connect this player to a  
Samsung TV with an HDMI cable.  
NOTE  
With Anynet+ on, you can operate this player  
using a Samsung TV remote control and start  
In the external memory mode, disc playback may  
disc playback simply by pressing the PLAY (  
button on the TV’s remote control.  
For more information, please see the TV user  
manual.  
)
be stopped if you disconnect the USB device in the  
middle of playback.  
Only those USB devices formatted in FAT file  
system (DOS 8.3 volume label) are supported. We  
recommend you use USB devices that support USB  
2.0 protocol with 4 MB/sec or faster read/write  
speed.  
Off : Anynet+ functions will not work.  
On : Anynet+ functions will work.  
ꢂ0  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Resume Play function may not work after you  
format the storage device.  
Security  
This function works in conjunction with Blu-ray  
Disc/DVDs that have been assigned an age rating  
or numeric rating that indicates the maturity level  
of the content. These numbers help you control  
the types of Blu-ray Disc/DVDs that your family  
can watch.  
The total memory available to BD Data Management  
may differ, depending on the conditions.  
Time Zone  
You can specify the time zone that is applicable to  
your area.  
Select an age rating you want to set for the BD  
Parental Rating and a rating level you want to set  
for the DVD Parental Rating. The player will only  
play Blu-ray Discs rated at or below the age rating  
and DVDs rated below the numeric rating unless  
the password is entered.  
Settings  
Time Zone  
Display  
Audio  
Network  
System  
Languag
Security  
Larger numbers indicate more mature content.  
GMT + 00:00  
General  
Support  
BD Parental Rating  
London, Lisbon, Casablanca  
<
Change  
"
Save  
'
Return  
Prevent playback of Blu-ray Discs with specific  
age ratings unless a password is entered.  
DivX® Video On Demand  
DVD Parental Rating  
View DivX® VOD Registration Codes to purchase  
and play DivX® VOD contents.  
Prevent playback of DVDs with specific numerical  
ratings unless a password is entered.  
Change Password  
Reset  
Change the 4-digit password used to access  
security functions.  
All settings will revert to the default except for the  
network and Smart Hub settings.  
NOTE  
If you forgot your password  
The default password is 0000.  
1. Remove the disc.  
2. Press and hold the STOP (  
) button on the  
Language  
front panel for 5 seconds or more.  
All settings will revert to the factory settings.  
You can select the language you prefer for the  
Home menu, disc menu, etc.  
NOTE  
On-Screen Menu : Select the language for the  
When the factory default settings are restored, all  
the user stored BD data will be deleted.  
on-screen displays.  
Disc Menu : Select the language for the disc  
menu displays.  
Audio : Select the language for disc audio.  
Subtitle : Select the language for disc subtitles.  
NOTE  
The selected language will only appear if it is  
supported on the disc.  
English  
ꢂ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
General  
Support  
Front Display  
Software Upgrade  
Change the brightness of the front panel.  
The Software Upgrade menu allows you to  
upgrade the player’s software for performance  
improvements or additional services.  
Auto : Dim during playback.  
Dim : Dim the display window.  
Bright : Brighten the display window.  
By Internet  
To upgrade by Internet, follow these steps:  
Network Remote Control  
1. Select By Internet, and then press the  
ENTER button. The Connecting to Server  
message appears.  
The Network Remote Control function lets you  
control your Blu-ray Disc player from a remote  
device such as a smart phone through a wireless  
connection to your local area network.  
2. If there is a download available, the Download  
pop-up appears with a progress bar and the  
download starts.  
To use the Network Remote Control function,  
follow these steps:  
3. When the download is complete, the Upgrade  
Query window appears with three choices:  
Upgrade Now, Upgrade Later, or Don’t  
Upgrade.  
1. Select On in the Network Remote Control  
menu.  
2. Install the Samsung network remote control  
application to control your player on your  
compatible portable device.  
4. If you select Upgrade Now, the player  
upgrades the software, turns off, and then  
turns on automatically.  
3. Make sure your portable device and your  
player are connected to the same wireless  
router.  
5. If you do not make a selection in one minute  
or select Upgrade Later, the player stores  
the new upgrade software. You can upgrade  
the software later using the By Downloaded  
function.  
4. Start the application on your portable device.  
The application should find your player and  
display it on a list.  
6. If you select Don’t Upgrade, the player  
5. Select the player.  
cancels the upgrade.  
6. If this is the first time you are using the  
function, it will ask you to allow or deny  
remote control of the player. Select Allow.  
NOTE  
Your player must be connected to the Internet to use  
the By Internet function.  
7. Follow the instructions that came with the  
application to control the player.  
The upgrade is complete when the player turns off,  
and then turns on again by itself.  
Never turn the player off or back on manually during  
the update process.  
ꢂꢀ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Samsung Electronics shall take no legal responsibility  
for player malfunction caused by an unstable  
Internet connection or consumer negligence during a  
software upgrade.  
5. Finalize the disc before you remove it from  
your computer.  
6. Insert the disc into player.  
7. In the player’s menu, go to Settings > Support  
If you want to cancel the upgrade while the upgrade  
> Software upgrade.  
software is downloading, press the ENTER button.  
8. Select By Disc.  
NOTE  
By USB  
When the system upgrade is done, check the  
To upgrade by USB, follow these steps:  
software details in the software Upgrade menu.  
Do not turn off the player during the Software  
2. Download the latest USB software upgrade  
Upgrade. It may cause the player malfunction.  
zip archive to your computer.  
3. Unzip the zip archive to your computer. You  
should have a single folder with the same  
name as the zip file.  
By Downloaded  
The By Downloaded option lets you upgrade  
using a file the player downloaded earlier but  
you decided not to install immediately or a file  
downloaded by the player in Standby Mode (See  
Download in Standby Mode below).  
4. Copy the folder to a USB flash drive.  
5. No disc should be inserted in the product,  
and then insert the USB flash drive into the  
USB port of the player.  
To upgrade By Downloaded, follow these steps:  
6. In the player’s menu, go to Settings > Support  
1. If upgrade software has been downloaded,  
you will see the software version number to  
the right of By Downloaded.  
> Software Upgrade.  
7. Select By USB.  
2. Select By Downloaded, and then press the  
NOTE  
ENTER button.  
No disc should be inserted in the product when you  
upgrade the software using the USB Host jack.  
3. The player displays a message asking if you  
want to upgrade. Select Yes. The player  
begins the upgrade.  
When the software upgrade is done, check the  
software details in the software Upgrade menu.  
4. When the update is complete, the player turns  
Do not turn off the player during the software  
upgrade. It may cause the player to malfunction.  
off automatically, and then turns on.  
NOTE  
Software upgrades using the USB Host jack must be  
When the system upgrade is done, check the  
software details in the software Upgrade menu.  
performed with a USB memory flash stick only.  
By Disc  
Do not turn off the player during the software  
Upgrade. It may cause the player to malfunction.  
To upgrade by Disc, follow these steps:  
Download in Standby Mode  
2. Download the latest disc software upgrade  
You can set the Download in Standby Mode  
function so that the player downloads new  
upgrade software when it is in Standby mode. In  
Standby mode, the player is off, but its Internet  
connection is active. This allows the player to  
download upgrade software automatically, when  
you are not using it.  
zip archive to your computer.  
3. Unzip the zip archive to your computer. You  
should have a single folder with the same  
name as the zip file.  
4. Write the folder onto a disc. We recommend  
a CD-R or DVD-R.  
English  
ꢂꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
To set Download in Standby Mode, follow these  
steps:  
1. Press the ▲▼ buttons to select Download in  
Standby Mode, and then press the ENTER  
button.  
2. Select On or Off.  
Off : If you select Off, the player will notify  
you with a pop up message when new  
upgrade software is available.  
On : If you select On, the player will  
automatically download new upgrade  
software when it is in Standby mode with  
the power off. If it downloads new upgrade  
software, the player will ask you if you want  
to install it when you turn the player on.  
NOTE  
To use the Download in Standby Mode function, your  
player must be connected to the Internet.  
Contact Samsung  
Provides contact information for assistance with  
your player.  
ꢂꢂ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Functions  
Playing a Video  
3. You can toggle between 2D and 3D by  
pressing the 2D3D button repeatedly.  
If you are playing 3D contents in the 3D  
mode, you cannot use this function.  
Playback  
NOTE  
1. Press the OPEN/CLOSE (  
) button to  
You can’t convert 2D contents into 3D or use the  
open the disc slot.  
2D3D button In the following cases:  
2. Push a disc into the Blu-ray Disc player with  
-
When the player is not connected with an HDMI  
cable  
the disc’s label facing up.  
-
-
When the connected TV does not support 3D  
When you are playing 3D contents (disc, file).  
2D content is converted into the following 3D  
formats:  
-
-
-
1080p 24fps : Output to 1080p 24 fps 3D.  
Others : Output to 720p 3D.  
Photo files : Output to 720p 3D.  
3. Press the PLAY (  
) button.  
2D content that the player can convert to 3D:  
-
-
2D content that supports 3D conversion  
Playback related buttons  
Smart Hub content, DVD Video, BD-ROM, VCD,  
Video files, and photo files.  
PLAY (  
STOP (  
PAUSE (  
)
Starts playback.  
Stops playback.  
When you use the 3D converter, the Bonusview  
function is not available.  
If you press the button once : The  
stop position is memorized.  
(Depending on the disc, a black outline appears.)  
)
Some viewers may experience discomfort while  
viewing 3D contents such as dizziness, nausea, and  
headaches.  
If you press the button twice : The  
stop position is not memorized.  
)
Pauses playback.  
Adjusting the 3D Depth  
NOTE  
The 3D Depth function lets you adjust the 3D  
depth of 2D to 3D conversions. Values range from  
1 to 10. The higher the number, the deeper the  
3D depth.  
For some discs, pressing the STOP (  
) button  
once may not memorize the stop position.  
Video files with high bit rates of 20Mbps or more  
strain the player’s capabilities and may stop playing  
during playback.  
1. When you are viewing converted 3D contents,  
press the TOOLS button.  
2. Press the ▲▼ buttons to select 3D Depth,  
3D Converter  
and then press the ENTER button.  
3. Adjust the 3D Depth using the ◄► buttons.  
This function can convert the 2D output of 2D  
contents into 3D.  
1. Connect this player to a TV that supports 3D  
using an HDMI cable.  
2. When you play 2D contents, press the 2D  
3D button on the remote control to convert  
2D into 3D contents.  
English  
ꢂꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Functions  
Disc Structure  
Using the Title Menu  
The content of discs are usually divided as shown  
Z
below.  
1. During playback, press the TITLE  
Blu-ray Disc, DVD-VIDEO  
MENU button on the remote control.  
title 1  
title 2  
2. Press the ▲▼◄► buttons to make  
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3  
the desired selection, then press the ENTER  
button.  
NOTE  
Depending on the disc, the menu items may differ  
and this menu may not be available.  
Audio CD (CD-DA)  
Playing the Title List  
track 1  
track 2  
track 3  
track 4  
track 5  
file 3  
z
1. During playback, press the DISC  
MENU or TITLE MENU button.  
MP3, WMA, DivX, MKV and MP4  
2. Press the ▲▼ buttons to select an  
entry you want to play from the Title  
List, and then press the ENTER  
button.  
folder (group) 1  
folder (group) 2  
file 1 file 2  
file 1  
file 2  
NOTE  
If your disc has a playlist, press the GREEN (B) button  
to go to the playlist.  
Using the Disc Menu/Title Menu/  
Popup Menu  
Using the Popup Menu  
h
Using the Disc Menu  
1. During playback, press the POPUP  
MENU button on the remote control.  
hZ  
2. Press the ▲▼◄► buttons or ENTER  
1. During playback, press the DISC  
button to select the desired menu.  
MENU button on the remote control.  
NOTE  
2. Press the ▲▼◄► buttons to make a  
selection, and then press the ENTER  
button.  
Depending on the disc, the menu items may differ  
and this menu may not be available.  
NOTE  
Depending on the disc, the menu items may differ  
and this menu may not be available.  
ꢂꢄ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Search and Skip Functions  
Slow Motion Play/Step Motion Play  
During play, you can search quickly through a  
chapter or track, and use the skip function to  
jump to the next selection.  
Slow Motion Play  
hzZ�  
)
Searching for a Desired Scene  
hzZ��  
In pause mode, press the SEARCH (  
button.  
Each time you press the SEARCH (  
) button,  
During playback, press the SEARCH (  
)
the playback speed will change as follows:  
*
button.  
1/8  
*
1/4  
*
1/2  
Each time you press the SEARCH (  
)
To return to normal speed playback, press the  
button, the playback speed will change as follows  
:
PLAY (  
) button.  
NOTE  
BD-ROM,  
)
)
1   
)
)
2   
)
)
3   
BD-RE/-R,  
The player does not play sound in Slow mode.  
4   
5   
6   
)
(
7
7
DVD-RW/-R,  
DVD+RW/+R,  
DVD-VIDEO  
(
(
1   
(
(
2   
(
(
3   
4   
5   
6   
Step Motion Play  
)
(
1   
)
(
2   
)
(
3
3
hzZ��  
) button.  
DivX, MKV, MP4  
1   
2   
In pause mode, press the PAUSE (  
Each time you press the PAUSE (  
) button, a  
To return to normal speed playback, press the  
new frame appears.  
PLAY (  
) button.  
To return to normal speed playback, press the  
NOTE  
PLAY (  
) button.  
The player does not play sound in search mode.  
NOTE  
The player does not play sound in Step mode.  
Skipping Chapters  
Using the TOOLS button  
hzZ��  
)
During playback, press the SKIP (  
During playback, you can operate the disc  
button.  
menu by pressing the TOOLS button.  
If you press the SKIP (  
If you press the SKIP (  
) button, the disc  
moves to the next chapter.  
Tools Menu Screen  
) button, the disc  
moves to the beginning of the chapter. One  
more press makes the disc move to the  
beginning of the previous chapter.  
Tools  
:
Title Search  
Chapter Search  
Time Search  
Repeat Mode  
Full Screen  
Picture Settings  
Audio  
1/2  
1/20  
: 00:00:13/01:34:37  
:
:
:
:
:
:
:
:
0ff  
Original  
Normal  
1/1 JPN 2CH  
0/2 Off  
1/1  
Subtitle  
Angle  
BONUSVIEW Video  
BONUSVIEW Audio  
Off  
0/1 Off  
<
Change  
"
Enter  
'
Return  
English  
ꢂꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Functions  
NOTE  
Repeating a Section  
Depending on the disc, the Tools menu may differ.  
hzZ�  
1. During playback, press the TOOLS  
Moving to a Desired Scene Directly  
hzZ�  
button.  
1. During playback, press the TOOLS button.  
2. Press the ▲▼ buttons to select Repeat Mode.  
2. Press the ▲▼ buttons to select Title Search,  
3. Press the ◄► buttons to select Repeat A-B,  
Chapter Search, or Time Search.  
then press the ENTER button.  
3. Press the ◄► or number button to select  
desired Title, Chapter or Time, then press the  
ENTER button.  
4. Press the ENTER button at the point where  
you want repeat play to start (A).  
5. Press the ENTER button at the point where  
you want repeat play to stop (B).  
Repeating the Title or Chapter  
hzZ�  
6. To return to normal play, press the TOOLS  
button again.  
7. Press the ▲▼ buttons to select Repeat Mode.  
8. Press the ◄► buttons to select Off, and then  
To repeat the disc title or chapter.  
press the ENTER button.  
Depending on the disc, the Repeat function may  
not be available.  
NOTE  
If you set point (B) before 5 seconds has elapsed, a  
1. During playback, press the TOOLS  
prohibition message appears.  
button.  
Depending on the disc, the menu items may differ  
and this menu may not be available.  
2. Press the ▲▼ buttons to select Repeat Mode.  
3. Press the ◄► buttons to select Chapter or  
Changing to Full Screen  
Title, then press the ENTER button.  
4. To return to normal play, press the TOOLS  
1. During playback, press the TOOLS button.  
button again.  
2. Press the ▲▼ buttons to select Full Screen.  
5. Press the ▲▼ buttons to select Repeat Mode.  
3. Press the ◄► buttons to select the desired  
6. Press the ◄► buttons to select Off, then  
mode.  
press the ENTER button.  
NOTE  
This function is available when the TV aspect ratio is  
16:9 full. (See page 30)  
ꢂꢆ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The languages available through the Audio Language  
function depend on the languages that are encoded  
on the disc. This function or certain languages may  
not be available.  
Selecting the Picture Settings  
hzZ�  
This function enables you to adjust video quality  
A Blu-ray Disc can contain up to 32 audio languages  
when the player is connected to a TV.  
and a DVD up to 8.  
1. During playback, press the TOOLS button.  
Some Blu-ray Discs may allow you to select either  
the PCM or Dolby digital audio soundtrack in English.  
2. Press the ▲▼ buttons to select Picture  
Settings, and then press the ENTER button.  
If you press the AUDIO button on the remote control,  
Audio bar appears.  
3. Press the ◄► buttons to select the desired  
Picture Settings, and then press the ENTER  
button.  
Press the RETURN button to remove the Audio bar.  
Dynamic : Choose this setting to increase  
Selecting the Subtitle Language  
hZ�  
You can also operate this function by  
pressing the SUBTITLE button on the  
remote control.  
Sharpness.  
Normal : Choose this setting for most  
viewing applications.  
Movie : This is the best setting for watching  
movies.  
User : Lets you adjust the sharpness and  
noise reduction function respectively.  
1. During playback, press the TOOLS button.  
NOTE  
2. Press the ▲▼ buttons to select Subtitle.  
When you use BD wise function, this menu will not  
appear.  
3. Press the ◄► buttons to select the desired  
subtitle language.  
NOTE  
Selecting the Audio Language  
hzZ�  
You can also operate this function by  
pressing the AUDIO button on the  
remote control.  
Depending on the Blu-ray Disc / DVD, you may be  
able to change the desired subtitle in the Disc Menu.  
Press the DISC MENU button.  
This function depends on the selection of subtitles  
that are encoded on the disc and may not be  
available on all Blu-ray Discs/DVDs.  
A Blu-ray Disc can contain up to 255 subtitle  
languages and a DVD up to 32.  
1. During playback, press the TOOLS button.  
Information about the main feature/BONUSVIEW  
mode will also appear if the Blu-ray Disc has a  
BONUSVIEW section.  
2. Press the ▲▼ buttons to select Audio.  
3. Press the ◄► buttons to select the desired  
audio language.  
This function changes both the primary and  
NOTE  
secondary subtitles at the same time.  
The ◄► indicator will not appear on the screen  
if the BONUSVIEW section does not contain any  
BONUSVIEW audio settings.  
The total numbers of primary and secondary  
subtitles are displayed respectively.  
If you press the SUBTITLE button on the remote  
Information about the main feature/BONUSVIEW  
mode will also appear if the Blu-ray Disc has a  
BONUSVIEW section.  
control, the subtitle bar appears.  
Press the RETURN button to remove the subtitle bar.  
Press the ◄► button to switch between main  
feature and BONUSVIEW audio modes.  
English  
ꢂꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Functions  
Listening to Music  
Changing the Camera Angle  
o  
hZ  
When a Blu-ray Disc/DVD contains multiple angles  
of a particular scene, you can use the ANGLE  
function.  
Playing an Audio CD (CD-DA)/MP3  
1. Insert an Audio CD (CD-DA) or an MP3 Disc.  
1. During playback, press the TOOLS button.  
For an Audio CD (CD-DA), the first track  
2. Press the ▲▼ buttons to select Angle.  
plays automatically.  
3. Press the ◄► buttons to select the desired  
For an MP3 disc, press the ▲▼ buttons to  
select Music, then press the ENTER button  
on the connected device popup.  
Angle.  
Setting BONUSVIEW  
Press the ENTER button.  
Audio CD (CD-DA)/MP3 Screen Elements  
h
The BONUSVIEW feature allows you to view  
additional content (such as commentaries) in a  
small screen window while the movie is playing.  
This function is only available if the disc has the  
Bonusview feature.  
1
2
3
Music  
1/13  
1. During playback, press the TOOLS button.  
TRACK 001  
TRACK 001  
00:43  
2. Press the ▲▼ buttons to select BONUSVIEW  
TRACK 002  
03:56  
Video or BONUSVIEW Audio.  
TRACK 003  
04:41  
3. Press the ◄► buttons to select the desired  
7
6
TRACK 004  
04:02  
Bonusview.  
+
00:13 / 00:43  
NOTE  
Audio CD  
"
Enter  
<
Page  
/
Tools  
'
Return  
If you switch from BONUSVIEW Video, BONUSVIEW  
Audio will change automatically in accordance with  
BONUSVIEW Video.  
5
4
2D contents are playing convert into 3D, bonusview  
function is not available.  
Displays the music information.  
Displays the playlist.  
Display the current track/total tracks.  
Displays buttons available.  
Shows the current play time/total play time.  
Displays the current playback status.  
Displays the repeated playback status.  
1
(Depending on discs, black outline may be shown)  
2
3
4
5
6
7
2. Press the ▲▼ buttons to select the track  
you want to play, and then press the ENTER  
button.  
ꢃ0  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Press the ▲▼◄► buttons to move to a  
desired track, and then press the ENTER  
button. A check appears on the track.  
Repeat this procedure to select additional  
tracks.  
Repeat an Audio CD (CD-DA)/MP3  
1. During the Playlist playback, press the  
TOOLS button.  
2. Press the ▲▼ buttons to select  
Repeat Mode, and then press the ◄►  
1/2 Page  
Audio CD  
| Music  
buttons to select the desired repeat mode.  
Selected Items : 3  
3. Press the ▲▼ buttons to select Shuffle Mode,  
and then press the ◄► buttons to select On  
or Off.  
TRACK 001  
TRACK 002  
00:43  
03:56  
TRACK 003  
04:41  
TRACK 004  
04:02  
TRACK 005  
TRACK 006  
03:43  
03:40  
4. Press the ENTER button.  
TRACK 007  
04:06  
TRACK 008  
03:52  
Songs are played in the order in which  
Off  
they were recorded.  
c
Close Edit Mode  
(
)
Page  
/
Tools  
"
Select  
'
Return  
(
(
) One Song The current song is repeated.  
5. To remove a track from the list, move to the  
track, and then press the ENTER button  
again.  
) All  
All songs are repeated.  
The random option plays songs in  
The check on the track is cancelled.  
(
)
Shuffle Mode random order. To operate this function,  
6. When done, press the TOOLS button.  
please set the shuffle mode to On.  
7. Press the ▲▼ buttons to select Play  
Selected, and then press the ENTER button.  
The tracks you selected play automatically.  
Playlist  
Music  
1. Insert an Audio CD (CD-DA) or an MP3 Disc.  
1/3  
For an Audio CD (CD-DA), the first track  
TRACK 001  
TRACK 001  
00:43  
plays automatically.  
TRACK 002  
03:56  
For an MP3 disc, press the ▲▼ buttons  
to select Music, then press the ENTER  
button.  
TRACK 003  
04:41  
+
00:13 / 00:43  
2. To move to the Music List, press the STOP  
Audio CD  
"
Enter  
/
Tools  
'
Return  
(
) or RETURN button.  
The Music List screen appears.  
8. To go to the Music List, press the RETURN  
3. Press the YELLOW (C) button.  
button.  
NOTE  
You can create a playlist with up to 99 tracks on  
Audio CDs (CD-DA).  
English  
ꢃ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Functions  
Zoom : Select to enlarge the current picture.  
Playing back Pictures  
(Enlarged up to 4 times)  
Rotate : Select to rotate the picture. (This will  
rotate the picture either clockwise or counter  
clockwise.)  
G
Playing JPEG files  
Picture Settings : Select this if you want to  
adjust the picture quality.  
1. Insert a JPEG disc.  
Information : Shows the picture information  
2. Press the ▲▼ buttons to select Photos, and  
including the name and size, etc.  
then press the ENTER button.  
NOTE  
3. Press the ▲▼◄► buttons to select the folder  
you want to play, and then press the ENTER  
button.  
To enable the background music function, the photo  
file must be in the same storage media as the music  
file. However, the sound quality can be affected by  
the bit rate of the MP3 file, the size of the photo, and  
the encoding method.  
4. Press the ▲▼◄► buttons to select the photo  
you want to play, and then press the ENTER  
button.  
Using the Slide Show function  
NOTE  
You can’t enlarge the subtitle and PG graphic in the  
full screen mode.  
1. Press the TOOLS button.  
2. Press the ▲▼ buttons to select Start Slide  
Show, and then press the ENTER button.  
The Slide Show starts.  
Using the TOOLS button  
3. To pause the slide show, press the TOOLS  
button again.  
You can use various function by pressing  
the TOOLS button.  
Tools  
Pause Slide Show  
Slide Show Speed  
Slide Show Effect  
Background Music  
:
:
:
Normal  
Blind  
Off  
Tools  
Start Slide Show  
Background Music  
:
Off  
Background Music Setting  
Zoom  
Background Music Setting  
Zoom  
Rotate  
Rotate  
Picture Settings  
Information  
Picture Settings  
Information  
"
Enter  
'
Return  
"
Enter  
'
Return  
4. Press the ▲▼ buttons to select Pause Slide  
Show, and then press the ENTER button.  
5. You can also set the slide show speed and  
Start Slide Show : Select to start the slide  
effect using the same method.  
show.  
Background Music : Select to listen to music  
while viewing a picture.  
Background Music Setting : Select to set the  
background music setting.  
ꢃꢀ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE  
Playing back a USB Storage Device  
You must remove the USB storage device safely  
You can use the USB connection to play  
multimedia files (MP3, JPEG, DivX, etc) located  
from a USB storage device.  
(by performing the “Safely Remove USB” function)  
in order to prevent a possible damage to the USB  
memory. Press the MENU button to move to the  
Home menu, select the YELLOW (C) button, and  
then press the ENTER button.  
1. Move to the Home menu.  
If you insert a disc when playing a USB storage  
device, the device mode changes to “DVD or CD”  
automatically.  
My Contents  
Videos  
Photos  
Music  
My Devices  
Internet  
Settings  
d
WPS(PBC)  
2. In Stop mode, connect the USB storage  
device to the USB port on the front panel of  
the player.  
My Contents  
Videos  
Connected Device  
123  
My Devices  
Settings  
"
Enter  
'
Return  
c
Safely Remove USB  
d
WPS(PBC)  
3. Press the ENTER button.  
4. Press the ▲▼◄► buttons to select Videos,  
Music, or Photos, and then press the ENTER  
button.  
5. For playing back Video, Music or Photo files,  
see pages 45~53.  
English  
ꢃꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Services  
You can enjoy various network services such as  
Smart Hub or BD-LIVE by connecting the player  
to your network.  
3. The Smart Hub screen appears.  
In a few cases, the Country screen appears  
immediately after.  
4. If the Country screen has appeared, press  
the ▲▼ buttons to select your country, then  
press the ENTER button.  
Read the following instructions before using any  
network service.  
1. Connect the player to the network.  
NOTE  
(See pages 25~26)  
Certain applications are available only in certain  
countries.  
2. Configure the network settings.  
(See pages 36~40)  
5. The Terms of Service Agreement screen  
appears.  
If you want to agree, press the ◄► buttons  
to select Agree, then press the ENTER  
button.  
Using Smart Hub  
Using Smart Hub, you can stream movies, videos,  
and music from the Internet, access various for  
pay or free-of-charge applications and view them  
on your TV. Application content includes news,  
sports, weather forecasts, stock market quotes,  
maps, photos, and games.  
NOTE  
Screens can take a few seconds to appear.  
6. The Service Update screen appears and  
installs a number of services and applications.  
When done, it closes. The applications and  
services downloaded are displayed on the  
Smart Hub screen. This may take some time.  
You can also start this function by  
pressing the SMART HUB button on  
the remote control.  
NOTE  
Smart Hub may close momentarily during the  
installation process.  
Starting Smart Hub for the First  
Time  
A number of screens may appear after installation.  
You can press the ENTER button to close them or let  
them close on their own.  
To start Smart Hub for the first time, follow these  
steps :  
7. To start an application, press the ▲▼◄►  
buttons to highlight a widget, then press the  
ENTER button.  
1. Go to the Home menu.  
My Contents  
Videos  
Photos  
Music  
My Devices  
Internet  
Settings  
d
WPS(PBC)  
2. Press the ◄► buttons to select Internet, and  
then press the ENTER button.  
ꢃꢂ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Smart Hub at a Glance  
Navigation Help : Displays the remote control  
buttons you can use to navigate in Smart Hub.  
1
2
3
4
5
RED (A) : To log in to Smart Hub.  
6
GREEN (B) : To sort the applications.  
YELLOW (C) : To edit the applications.  
BLUE (D) : To change the settings of Smart Hub.  
Search  
Your Video  
Samsung Apps  
Contents  
1
Contents  
2
Contents  
3
Contents  
4
Recommended  
Contents  
1
Contents  
2
Contents  
3
Contents  
4
Contents  
5
My Applications : Displays your personal gallery  
of applications which you can add to, modify, and  
delete.  
xxxxxxxx  
xxxxxxxx  
xxxxxxxx  
xxxxxxxx  
xxxxxxxx  
7
Contents  
1
Contents  
2
Contents  
3
Contents  
4
Contents  
5
Contents  
6
xxxxxxxx  
xxxxxxxx  
xxxxxxxx  
xxxxxxxx  
xxxxxxxx  
xxxxxxxx  
Contents  
7
Contents  
8
Contents  
9
Contents 10  
Contents 11  
Contents 12  
xxxxxxxx  
xxxxxxxx  
xxxxxxxx  
xxxxxxxx  
xxxxxxxx  
xxxxxxxx  
NOTE  
a
Login  
b
Sort by  
c
Edit Mode  
d
Settings  
Samsung Electronics takes no legal responsibility for  
any interruption of the Smart Hub service caused by  
the service provider for any reason.  
7
6
The Smart Hub service downloads and processes  
data via the Internet so that you can enjoy the  
Internet contents on your TV screen.  
If the Internet connection is unstable, the service  
may be delayed or interrupted.  
Commercial : Displays the Smart Hub Guide, an  
introduction to the player, and new application  
introductions.  
1
2
Your Video : Provides recommendations for videos  
Furthermore, the player may turn off automatically in  
response to conditions on the Internet.  
If this occurs, check the Internet connection and try  
again.  
based on your tastes.  
Lets you see movie recommendations based on  
your previous preferences.  
Lets you select a movie, displays a list of VOD  
(Video on Demand) providers that have the movie,  
and then lets you choose a provider for streaming.  
(Streaming is unavailable in some areas.)  
Application services may be provided in English only  
and the contents available may vary, depending on  
your area.  
For instructions to use Your Video, please visit  
For more information about a Smart Hub service,  
visit the web site of the applicable service provider.  
The services provided are subject to change by the  
Smart Hub service provider without notice.  
Search : Provides an integrated search of your video  
providers and connected AllShare devices.  
The Smart Hub service contents may differ  
Usable while using Smart Hub (except when you  
are watching a Blu-ray Disc).  
depending on the player’s firmware version.  
3
For easy access, use the SEARCH button on the  
remote control.  
For instructions to use search function, please  
Samsung Apps : You can download various for pay  
4
5
or free-of-charge application services.  
Recommended : Displays recommended contents  
managed by Samsung.  
English  
ꢃꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Services  
To move within the text, use the Arrow buttons.  
To delete text, move the cursor to the right of the  
character you want to delete, and then press the  
AUDIO button. To change case or enter numbers  
or punctuation, press the SUBTITLE button.  
Using the Keypad  
Through your remote, you can use the On-Screen  
Keypad to enter letters, numbers, and symbols.  
Creating an Account  
1
2
3
. , –  
abc  
def  
To establish your own, exclusive, configuration of  
Smart Hub, create your own Smart TV Account.  
4
5
6
1
ghi  
jkl  
mno  
7
8
9
To create an account, follow these steps:  
pqrs  
tuv  
wxyz  
0
1. Press the RED (A) button on your remote  
2
3
6
Shift  
Delete  
control. The Create Account screen appears.  
T9  
ab Ab AB  
1
b
Input Method  
/
Language: English  
Login  
Smart TV ID  
Password  
Press [Enter]  
%
4
5
Press [Enter]  
Remember my Smart TV ID and password  
Login  
Cancel  
Create Account  
Forgot Password  
The current keypad.  
1
2
Use to enter letters, numbers, and symbols.  
Press the SUBTITLE button on the remote control to  
shift the input mode.  
2. Press the ▲▼◄► buttons to select Create  
: ab, Ab, AB, numbers or icons.  
Account, and then press the ENTER button.  
Displays the current input mode.  
3
4
3. On the next screen, select Smart TV ID, and  
then press the ENTER button.  
Press the GREEN (B) button on the remote control  
An entry screen and keypad appear.  
to change the input method. (T9 or ABC)  
4. Use the keypad to enter your e-mail address.  
Press the TOOLS button on the remote control to  
This will serve as your ID.  
5
6
change the language.  
NOTE  
Press the AUDIO button on the remote control to  
The keypad works like the keypad on a cell phone.  
delete a character.  
5. When done, press the ENTER button to  
select OK, and then press the ENTER  
button again. The Create Account screen re-  
appears.  
Entering Text, Numbers and Symbols  
To enter text, press the number button on the  
remote that corresponds to the letter you want  
to enter. Press the button rapidly to enter a letter  
that is not the first letter listed on the On-Screen  
keypad button. For example, if you want to enter  
the letter b, press the 2 button on your remote  
rapidly twice. To enter the first letter listed on a  
button, press, release, and then wait.  
6. Select Password, and then press the ENTER  
button. An entry screen and a keypad appear.  
7. Use the keypad to enter a password.  
The password can be any combination of  
letters, numbers, and symbols.  
NOTE  
Press the RED (A) button on your remote to show or  
hide the password as you enter it.  
ꢃꢄ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. When done, press the ENTER button to  
select OK, and then press the ENTER  
button again. The Create Account screen re-  
appears.  
3. Select your ID from the list that appears, and  
then press the ENTER button. The Create  
Account screen re-appears.  
4. Select Password, and then press the ENTER  
button. An entry screen and a keypad  
appears.  
9. Select Confirm password, and then press  
the ENTER button.  
10. Repeat Steps 7 and 8.  
5. Using the keypad and your remote, enter your  
password. When done, press the ENTER  
button, select OK, and then press the ENTER  
button again.  
11. When the Create Account screen re-appears,  
select Create Account, and then press the  
ENTER button. The Confirmation window  
appears.  
NOTE  
12. Select OK, and then press the ENTER  
button. The Continue to Register Service  
window appears.  
If you want Smart Hub to enter your password  
automatically, select Remember my Smart TV ID and  
password after you have entered your password,  
and then press the ENTER button. A check  
13. Select Go Register, and then press the  
appears. Smart Hub will now enter your password  
automatically when you select or enter your ID.  
ENTER button.  
14. The Register Service Account Window  
appears.  
If you have existing accounts with any of  
the listed providers, you can associate the  
provider account and the provider account  
password with your Smart TV Account.  
Registration makes it easier to access  
the providers web site. For registration  
instructions, go to Step 2 in Account  
Management under the Settings Menu.  
The Settings Menu - BLUE (D)  
The Settings Menu Screen gives you access  
to account management, reset, and properties  
functions.  
To access the Settings Menu, and then select a  
menu item, follow these steps:  
1. Press the BLUE (D) button on your remote.  
If you don’t have existing provider accounts  
or do not want to register existing accounts  
at this time, select OK, and then press  
the ENTER button. You can also let the  
window close on its own in about a minute.  
2. Press the ▲▼ to select a menu item, and  
then press the ENTER button.  
The functions on the Settings Menu screen are  
described below.  
NOTE  
NOTE  
The Service Manager item listed in the Settings  
Menu is not available for Blu-ray Disc players.  
You must use an e-mail address as an ID.  
You can register up to 10 User Accounts.  
You do not need an account to use Smart Hub.  
Account Management  
The Account Management Menu contains  
Account Log In  
functions that let you register your service provider  
accounts, change your Smart Hub password, and  
delete or deactivate your Smart TV Account.  
To log in to your Smart TV Account, follow these  
steps:  
1. With the Smart Hub main screen displayed  
on your TV, press the RED (A) button on your  
remote. The Create Account screen appears.  
2. Select the Down Arrow next to the Smart TV  
ID field, and then press the ENTER button.  
English  
ꢃꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Services  
Register Service Account  
Change Password  
If you have existing accounts with any of the  
providers listed by the Register Service Account  
function, you can associate the provider account  
and the provider account password with your  
Smart TV Account. If you associate the account,  
you will be able to log onto the account through  
Smart Hub easily, without entering your account  
name or password.  
The Change Password function lets you change  
your Smart Hub password. To change the  
password, follow these steps:  
1. Select Change Password, and then press  
the ENTER button.  
2. Enter your current password. The next screen  
appears.  
3. On the next screen, enter a new password on  
the first line. Enter it again on the second line  
to confirm.  
To use the Register Service Account function,  
follow these steps:  
1. In the Account Management menu, select  
Register Service Account, and then press the  
ENTER button. The Register Service Account  
Window appears.  
4. The Changing Password Complete message  
screen appears. Press the ENTER button  
or wait for the screen to close - about 5  
seconds.  
2. Press the ▲▼ buttons to select a Service  
Provider you want to associate with your  
Smart TV Account, and then press the  
ENTER button.  
Remove from TV Account list  
The Remove Service Accounts function cancels  
all your current registered Service Accounts that  
you registered on the Register Service Account  
screen.  
NOTE  
If you have a Samsung apps account and you want  
to use the Samsung Apps function in Smart Hub,  
you must register your Samsung Apps account here.  
See pages 61~63 for more information.  
Deactivate Account  
The Deactivate Account function deactivates  
your Smart TV Account and deletes it and all your  
account settings entirely from Smart Hub.  
3. Press the ▲▼ buttons to select Register, and  
then using your remote and the on-screen  
Keypad, enter your site ID and password.  
When done, press the ENTER button.  
Reset  
NOTE  
The Reset function initializes all downloaded  
widgets, erases all user accounts and settings  
from the player, and resets all Smart Hub settings  
to the factory default settings. It then restarts  
Smart Hub as if it were starting for the first time.  
Your account, however, remains on the Smart  
Hub server. To log into your account, enter your  
ID and password on the Create Account screen.  
This is the ID and password you normally use to  
access your account on this site.  
4. If you have entered the ID and password  
correctly, the Registered Successfully  
message appears.  
5. If you pressed OK, repeat Steps 2 through 4  
to associate another Service Provider.  
To use the Reset function, follow these steps:  
6. When you are done, press the RETURN  
1. In the Settings menu, select Reset, and then  
button.  
press the ENTER button.  
The Reset screen appears.  
2. Enter the your Security password. This is the  
password you entered if you set up a BD or  
DVD Parental rating (See page 41). If you did  
not, enter 0000.  
ꢃꢆ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. After a few moments, Smart Hub automatically  
resets. The screen may go black, then Smart  
Hub re-appears. In a few moments, it starts  
the re-initialization procedure.  
The functions in the Edit Mode Menu bar are  
described below.  
NOTE  
Some menu items may not appear on the screen.  
To see these items, press the ◄► to move to the  
screen edge, and then press one more time to reveal  
the items.  
4. To complete the re-initialization, go to Step 4  
in Starting Smart Hub for the First Time. (See  
page 54)  
NOTE  
You can close the bar by highlighting the X on the  
bottom right side, and then pressing the ENTER  
button.  
If you forgot your password, press the STOP (  
)
button on the front panel of the player for more than  
5 seconds with no disc inserted.  
Move  
Properties  
The Move function lets you change the screen  
position of a widget. To use the Move function,  
follow these steps:  
The Properties menu item lists three functions that  
display information about Smart Hub :  
1. Press the YELLOW (C) button on your  
Detail  
remote.  
Lists information about Smart Hub including  
version number, the number of services installed,  
memory usage, and the unique product ID.  
2. Select a widget, and then press the ENTER  
button. A check appears above the widget.  
3. Press the ▲▼◄► to select Move, and then  
press the ENTER button. A position change  
icon appears above the widget.  
Terms of Service Agreement  
Displays the Terms of Service Agreement.  
4. Press the ▲▼◄► to move the icon. Press  
the ENTER button when the icon is in the  
position of your choice. The widget moves to  
its new location.  
The Edit Mode Menu - YELLOW (C)  
The functions in the Edit Mode menu let you  
manipulate the widgets in the My Applications  
section of the Smart Hub screen. Using these  
functions, you can lock and unlock access to  
some widgets, New Folder and move widgets to  
them, rename folders, delete widgets, and change  
the position of widgets on the screen.  
Move to Folder  
The Move to Folder function lets you move a  
widget to a folder. To use the Move to Folder  
function, follow these steps:  
1. Press the YELLOW (C) button on your  
To access the Edit Mode Menu, and then select a  
remote.  
menu item, follow these steps:  
2. Select a widget, and then press the ENTER  
button. If you already create a folder, the  
widget can be moved.  
1. Press the YELLOW (C) button on your  
remote. The Edit Mode menu bar appears on  
the bottom of the screen.  
3. Press the ▲▼◄► to select Move to Folder,  
and then press the ENTER button. The Move  
to Folder window opens.  
2. Press the ▲▼◄► to select a menu item, and  
then press the ENTER button.  
4. Press the ▲▼◄► to select a folder, and  
then press the ENTER button. The Moved to  
Folder message appears, and then closes.  
The widget has been moved to the folder.  
English  
ꢃꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Services  
To Access Widgets in a Folder  
Rename Folder  
1. Close the Edit Mode menu.  
The Rename Folder function lets you rename  
folders. To use the Rename Folder function, follow  
these steps:  
2. In My Applications, press the ▲▼◄► to  
select a folder, and then press the ENTER  
button. The folder opens.  
1. Press the YELLOW (C) button on your  
remote.  
3. Select a widget, and then press the ENTER  
button. The widget’s application or service  
starts.  
2. Press the ▲▼◄► to select a folder, and then  
press the ENTER button.  
3. Press the ▲▼◄► to select Rename Folder,  
and then press the ENTER button. The Folder  
Rename window and a keypad appears.  
To Edit Items in a Folder  
Select a folder, and then press the ENTER button.  
The folder opens.  
4. Use the keypad to enter a new name, and  
then press the ENTER button. The Rename  
window closes and the new name appears  
below the folder.  
Press the YELLOW (C) button on your remote.  
The Edit buttons appear at the bottom of the  
screen.  
These buttons work the same as the Edit Mode  
menu buttons on the main screen. For example,  
to move a widget back to the My Applications  
main screen:  
Lock  
The Lock function lets you lock some widgets  
in My Applications so they can not be opened  
without entering the Parental Security Code.  
1. Select the widget.  
2. Select Move to Folder, and then press the  
ENTER button. The Move to Folder window  
appears.  
To use the Lock function, follow these steps:  
1. Press the YELLOW (C) button on your  
remote.  
3. Select My Applications, and then press the  
ENTER button. The Move to Folder window  
closes and the widget returns to the main My  
Applications screen.  
2. Press the ▲▼◄► to select a widget, and  
then press the ENTER button. If the widget  
can be locked, the Lock menu item darkens.  
3. Press the ▲▼◄► to select Lock, and then  
press the ENTER button. The Lock Service  
window appears.  
New Folder  
The New Folder function lets you create and name  
new folders. Once you have created a folder, you  
can move widgets into it. To use the New Folder  
function, follow these steps:  
4. Enter your Parental Security Code (See  
page 41). If you have not created a Parental  
Security Code, enter 0000.  
5. Press the ENTER button. The Lock Service  
window appears confirming the lock, and  
then closes. A lock symbol appears next to  
the widget.  
1. Press the YELLOW (C) button on your  
remote.  
2. Press the ▲▼◄► to move the cursor to New  
Folder, and then press the ENTER button.  
The New Folder window and a keypad  
appear.  
3. Use the keypad to enter the name of the  
folder, and then press the ENTER button.  
The New Folder screen closes and the New  
Folder appears on the Smart Hub screen.  
ꢄ0  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unlock  
Samsung Apps  
1. Press the YELLOW (C) button on your  
Samsung Apps lets you download for pay or free-  
of-charge applications and services to your Blu-ray  
Disc player and view or use them on your TV.  
remote.  
2. Press the ▲▼◄► to select a locked widget,  
These applications and services include videos,  
music, photos, games, news, sports, etc. Widgets  
for the new apps appear in My Applications.  
and then press the ENTER button.  
3. Press the ▲▼◄► to select Unlock, and then  
press the ENTER button. The Lock Service  
window appears.  
Additional applications and services are added  
regularly.  
4. Enter the Parental Security Code (See page  
41). If you have not created a Parental  
Security Code, enter 0000.  
For Pay Apps  
5. Press the ENTER button. The Lock Service  
Released window appears confirming the lock  
has been release, and then closes.  
To download for pay apps, you need to create a  
Samsung Apps account and add a credit card to the  
account.  
To create a Samsung Apps account, please visit  
Delete  
The Delete function lets you delete widgets from  
My Applications. To use the Delete function, follow  
these steps:  
NOTE  
This service may not provided in some countries.  
1. Press the YELLOW (C) button on your  
Accessing the Samsung Apps Screen  
remote.  
To access Samsung Apps, press the ▲▼◄►  
buttons to navigate to the Samsung Apps area  
on the Smart Hub main screen, and then press  
the ENTER button. The Samsung Apps screen  
appears.  
2. Press the ▲▼◄► to select a widget, and  
then press the ENTER button.  
3. Press the ▲▼◄► to select Delete, and then  
press the ENTER button. The message, “Do  
you want to delete selected item(s)?” appears.  
NOTE  
4. Select Yes, and then press the ENTER  
If this is the first time you are accessing this screen,  
the terms of service window appears. If you want  
to agree, select Agree, and then press the ENTER  
button.  
button. The widget is deleted.  
The Sort Menu - GREEN (B)  
The functions in the Sort Menu let you sort the  
widgets in My Applications by Name, Date,  
Frequency (of use), and Category. If you manually  
change the position of a widget, the Sort Menu  
automatically highlights User Defined when you  
start it.  
To sort the widgets in My Applications, follow  
these steps:  
1. Press the GREEN (B) button on your remote.  
2. Press the ◄► to select a sorting method,  
and then press the ENTER button. Smart  
Hub sorts the widgets by the method you  
have chosen.  
English  
ꢄ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Services  
Using the Samsung Apps Screen  
Samsung Apps by category  
To use the Samsung Apps screen, follow these  
The following categories are available:  
steps:  
What’s New? : Displays newly registered  
applications.  
1. Press the ◄► buttons to move to the  
Video : Displays various video media such as  
category list on the left.  
movies, TV shows, and short length videos.  
2. Press the ▲▼ to highlight a category. In a few  
seconds, the Samsung Apps screen displays  
the applications in that category. The Sort  
tabs appear across the top.  
Game : Displays various games such as sudoku  
and chess.  
Sports : Displays various sports media services  
such as match information, images, and short  
length videos.  
3. Press the ► button to move to the displayed  
applications or services.  
Lifestyle : Includes various lifestyle media  
services such as music, personal photo  
management tools, and social networking such  
as Facebook and Twitter.  
4. Press the ▲▼◄► buttons to select an  
application or service, and then press the  
ENTER button. The Application Details screen  
appears describing the service or application.  
Information : Includes various information  
5. Select Download Now, and then press the  
ENTER button. If the application or service is  
free, it downloads and runs. If not, and there  
is a fee, follow the directions on the screen to  
complete the download.  
services such as news, stocks, and weather.  
Other : Includes other miscellaneous services.  
My Account  
My Account gives you access to your Samsung  
Apps order and download history, and to the My  
Apps Cash screen. You must have a Samsung  
Apps account to access this information.  
NOTE  
Some apps are free to download, but require  
registration with the provider or a paid account with  
the provider to use.  
Widgets for applications and services you have  
downloaded from Samsung Apps appear in My  
Applications.  
Help  
If you have questions about Samsung Apps,  
check Help first. If none of the tips apply, please  
Sort By Tabs  
To use the Help function, follow these steps:  
You can access the Sort By tabs on the top of  
the screen using the ▲▼◄► buttons. Each  
tab displays the services or applications in the  
category you chose, sorted by the criteria on the  
tab (Recommended, Most Downloaded, Most  
Recent, Name).  
1. Press the ▲▼◄► buttons to select Help,  
and then press the ENTER button.  
2. Press the ▲▼ to scroll the Help text.  
3. Press the ◄ to exit Help.  
You can also use the BLUE (D) button on your  
remote to access the Sort By tabs. Each time  
you press the BLUE (D) button, you change the  
display from one sort tab to the next.  
ꢄꢀ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the colored buttons on your remote  
with Samsung Apps  
Using the AllShare Function  
AllShare lets you play music, video, and photo  
files located in your PC or your DLNA compatible  
mobile phone or NAS on the player.  
RED (A) (Login) : To log into your Smart TV  
Account.  
GREEN (B) (Thumbnail View/List View) : To  
toggle applications between Thumbnail and List  
view.  
To use AllShare with your player, you must  
connect the player to your network (See pages  
25~26).  
BLUE (D) (Sort By) : To sort the applications  
in a category by Recommended, Most  
Downloaded, Most Recent, or Name.  
To use AllShare with your PC, you must install  
AllShare software on your PC.  
If you have a DLNA compatible mobile phone or  
NAS, you can use AllShare without any additional  
software.  
Return : To return to the previous menu.  
NOTE  
You can download the PC software and get  
detailed instructions for using AllShare from the  
Samsung.com web site.  
The Internet contents services may be added or  
deleted by providers without notice.  
For instructions to use Your Video or Search  
BD-LIVE™  
Once the player is connected to the network, you  
can enjoy various movie-related service contents  
using a BD-LIVE compliant disc.  
1. Attach a USB memory stick to the USB jack  
on the side of the player, and then check  
its remaining memory. The memory device  
must have at least 1GB of free space to  
accommodate the BD-LIVE services.  
2. Insert a Blu-ray Disc that supports BD-LIVE.  
3. Select an item from various BD-LIVE service  
contents provided by the disc manufacturer.  
NOTE  
The way you use BD-LIVE and the provided contents  
may differ, depending on the disc manufacturer.  
English  
ꢄꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Troubleshooting  
Before requesting service, please check the following.  
PROBLEM  
SOLUTION  
No operation can be performed with the  
Check the batteries in the remote control. They may need replacing.  
Operate the remote control at a distance of no more than 20 feet.  
remote control.  
Remove batteries and hold down one or more buttons for several minutes  
to drain the microprocessor inside the remote control to reset it. Reinstall  
batteries and try to operate the remote control again.  
Disc does not play.  
Ensure that the disc is installed with the label side facing up.  
Check the region number of the Blu-ray Disc/DVD.  
Disc Menu does not appear.  
Ensure that the disc has disc menus.  
The prohibition message appears on the  
screen.  
This message appears when an invalid button is pressed.  
The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).  
You’ve requested a title or chapter number or search time that is out of  
range.  
Play mode differs from the Setup Menu  
selection.  
Some of the functions selected in the Setup Menu may not work properly if  
the disc is not encoded with the corresponding function.  
The screen ratio cannot be changed.  
The Screen Ratio is fixed on your Blu-ray Disc/DVD.  
This is not a problem with the player.  
No audio.  
Make sure you have selected the correct Digital Output in the Audio Options  
Menu.  
The screen is blocked  
If the HDMI output is set to a resolution your TV cannot support (for  
example, 1080p), you may not see a picture on your TV.  
Press the STOP (  
) button (on front panel) for more than 5 seconds with  
no disc inside. All settings will revert to the factory settings.  
When the factory default settings are restored, all stored user BD data is  
deleted.  
ꢄꢂ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROBLEM  
SOLUTION  
Forgot password  
Press the STOP (  
) button (on front panel) for more than 5 seconds with  
no disc inside. All settings including the password will revert to the factory  
settings.  
Don’t use this unless absolutely necessary.  
When the factory default settings are restored, all stored user BD data is  
deleted.  
If you experience other problems.  
Go to the contents and find the section of the user manual that contains the  
explanations regarding the current problem, and follow the procedure once  
again.  
If the problem still cannot be solved, please contact your nearest Samsung  
authorized service center.  
The picture is noisy or distorted  
No HDMI output.  
Make sure that the disc is not dirty or scratched.  
Clean the disc.  
Check the connection between the TV and the HDMI jack of the player.  
Check if your TV supports 480p, 720p, 1080i, 1080p HDMI input resolution.  
Abnormal HDMI output screen.  
If random noise appears on the screen, it means that TV does not support  
HDCP (High-bandwidth Digital Content Protection).  
AllShare function  
I can see folders shared through AllShare,  
AllShare shows only files corresponding to the Image, Music, and Movie  
categories. Files that do not correspond to these categories may not be  
displayed.  
but I cannot see the files.  
Video is played intermittently.  
Check if the network is stable.  
Check if the network cable is properly connected and if the network is not  
overloaded.  
The wireless connection between the DLNA compatible device and the  
player is unstable.  
Check the connection.  
AllShare connection between player and PC  
is unstable.  
The IP address under the same subnetwork should be unique. If they are  
not, IP interference can cause this phenomenon.  
Check if you have a firewall enabled.  
If so, disable the firewall function.  
English  
ꢄꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
PROBLEM  
BD-LIVE  
SOLUTION  
I cannot connect to the BD-LIVE server.  
Check whether the network connection is successful or not by using the  
Network Status menu. (See page 39)  
Check whether the USB memory device is connected to the player.  
The memory device must have at least 1GB of free space to accommodate  
the BD-LIVE service.  
You can check the available size in BD Data Management. (See page 40)  
Check whether the BD-LIVE Internet Connection menu is set to Allow(All).  
If all above fails, contact the contents provider or update the player to the  
latest firmware.  
When using the BD-LIVE service, an error  
occurs.  
The memory device must have at least 1GB of free space to accommodate  
the BD-LIVE service.  
You can check the available size in BD Data Management. (See page 40)  
NOTE  
When the factory default settings are restored, all stored user BD data is deleted.  
Repairs  
If you contact us to repair your player, an administration fee may be charged if either:  
1. An engineer is called out to your home at your request and there is no defect in the product.  
2. You bring the unit to a repair center and there is no defect in the product.  
We will provide you with the amount of the administration fee before we make a home visit or begin any  
work on your player.  
or contact Samsung Customer Care at 1-800-SAMSUNG (726-7864) before seeking to repair your  
player.  
ꢄꢄ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
K
U
A
Keypad  
56  
USB Storage Device  
53  
Accessories  
16  
63  
40  
49  
AllShare  
M
W
Anynet+ (HDMI-CEC)  
Audio Language  
Movie Frame (24Fs)  
MP3  
32  
Wired Network  
36~37  
37~40  
50~51  
Wireless Network  
B
N
Z
Background Music  
52  
BD Data Management 40~41  
Network Settings  
36~40  
Zoom  
52  
BD-LIVE  
40, 63  
30  
BD Wise  
P
BONUSVIEW  
50  
PCM Downsampling  
Popup Menu  
35  
46  
33  
C
Progressive Mode  
Camera Angle  
50  
44  
Contact Samsung  
R
Region Code  
13  
19  
D
Remote Control  
Remote Control Sensor  
Resolution  
Digital Output  
33~35  
46  
17  
Disc Menu  
30~32  
Disc Structure  
Disc Types  
46  
11~13  
35  
S
Downmixing Mode  
Dynamic Range Control  
Samsung Apps  
Slide Show  
61~63  
52  
35  
Smart Hub  
54~61  
42~44  
49~50  
H
Software Upgrade  
Subtitle Language  
HDMI Deep Color  
33  
40  
52  
I
T
Initial Settings  
3D Settings  
Title Menu  
TV Aspect  
29  
46  
30  
J
JPEG  
English  
ꢄꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Specifications  
Power Requirements  
DC12V, 2.0A  
Power Consumption  
Weight  
17W  
2.4 Ibs  
General  
Dimensions  
7.1 (W) X 7.1 (D) X 1.2 (H) inches  
Operating Temperature Range  
Operating Humidity Range  
BD (Blu-ray Disc)  
+41°F to +95°F  
10 % to 75 %  
Reading Speed : 9.834 m/sec  
Reading Speed : 6.98 ~ 7.68 m/sec  
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.  
Reading Speed : 4.8 ~ 5.6 m/sec.  
Maximum Play Time : 74 min.  
Reading Speed : 4.8 ~ 5.6 m/sec.  
Maximum Play Time : 20 min.  
1 Channel : 1.0 Vp-p (75Ω load)  
Blu-ray/DVDs : 480i  
DVD (Digital Versatile Disc)  
CD : 5 inches (COMPACT DISC)  
CD : 3 1/2 inches (COMPACT DISC)  
Composite Video  
Disc  
Video Output  
Video/Audio  
Audio Output  
2D : 1080p, 1080i, 720p, 480p  
3D : 1080p, 720p  
HDMI  
PCM audio, Bitstream audio  
L(1/L), R(2/R)  
2 Channel  
Digital Audio Output  
Ethernet  
Optical  
10/100BASE-TX Terminal  
Built-in  
Wireless LAN  
WEP (OPEN/SHARED)  
WPA-PSK (TKIP/AES)  
WPA2-PSK (TKIP/AES)  
Network  
Security  
WPS(PBC)  
Supported  
-
-
-
Design and specifications are subject to change without prior notice.  
Weight and dimensions are approximate.  
Dispose unwanted electronics through an approved recycler.  
(877) 278 - 0799  
ꢄꢆ  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Compliance and Compatibility Notice  
NOT ALL discs are compatible  
Subject to the restrictions described below and those noted throughout this Manual, including the Disc  
Type and Characteristics section of this user manual, disc types that can be played are: pre-recorded  
commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA) discs; BD-RE/-R, DVD-RW/-R discs; and  
CD-RW/-R discs.  
Discs other than the above cannot and/or is not intended to be played by this player. And some of the  
above discs may not play due to one or more reasons provided below.  
Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,  
DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not respond to  
all operating commands or operate all features of every disc. These and other disc compatibility and  
player operation issues with new and existing format discs are possible because:  
-
Blu-ray is a new and evolving format and this player may not operate all features of Blu-ray Discs  
because some features may be optional, additional features may have been added to the Blu-ray  
Disc format after the production of this player, and certain available features may be subject to  
delayed availability;  
-
-
-
not all new and existing disc format versions are supported by this player;  
new and existing disc formats may be revised, changed, updated, improved and/or supplemented;  
some discs are produced in a manner that allows specific or limited operation and feature during  
playback;  
-
-
some features may be optional, additional features may have been added after the production of this  
player or certain available features may be subject to delayed availability;  
some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and  
CD-RW/-R logos may still be non-standardized discs;  
-
-
some discs may not be played depending on their physical state or recording conditions;  
problems and errors can occur during the creation of Blu-ray Disc, DVD software and/or the  
manufacture of discs;  
-
-
this player operates differently than a standard DVD player or other AV equipment; and/or  
for reasons noted throughout this user manual and for other reason(s) discovered and posted by  
SAMSUNG customer care center.  
If you encounter disc compatibility or player operation problems, please contact SAMSUNG customer  
care center.  
You may also contact SAMSUNG customer care center for possible updates on this player.  
For additional information on playback restrictions and disc compatibility, refer to the Precautions,  
Before Reading the user manual, Disc Types and Characteristics, and Before Playing sections of this  
user manual.  
Copy Protection  
Because AACS (Advanced Access Content System) is approved as content protection system for  
Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain  
restrictions are imposed on playback, analog signal output, etc., of AACS protected contents.  
The operation of this product and restrictions on this product may vary depending on your time of  
purchase as those restrictions may be adopted and/or changed by AACS after the production of this  
product. Furthermore, BD-ROM Mark and BD+ are additionally used as content protection system for  
Blu-ray Disc format, which imposes certain restrictions including playback restrictions for BD-ROM  
Mark and/or BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark, BD+,  
or this product, please contact SAMSUNG customer care center.  
English  
ꢄꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should only connect  
your Player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from  
copy-protected Blu-ray Disc/DVDs.  
This item incorporates copy protection technology that is protected by U.S. patents and other  
intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.  
Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use,  
display, distribution, or revision of television programs, videotapes, Blu-ray Discs, DVDs, and other  
materials may subject you to civil and/or criminal liability.  
For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT NOT  
ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND  
MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF PROGRESSIVE SCAN  
PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO  
THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET  
COMPATIBILITY WITH THIS PRODUCT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.  
Network Service Disclaimer  
All content and services accessible through this device belong to third parties and are protected by  
copyright, patent, trademark and/or other intellectual property laws. Such content and services are  
provided solely for your personal noncommercial use. You may not use any content or services in a  
manner that has not been authorized by the content owner or service provider. Without limiting the  
foregoing, unless expressly authorized by the applicable content owner or service provider, you may  
not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or  
distribute in any manner or medium any content or services displayed through this device.  
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS IS.” SAMSUNG DOES NOT WARRANT  
CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE.  
SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED  
TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SAMSUNG  
DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS  
OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO  
CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN  
CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL  
DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN  
CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF ANY  
CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF  
SUCH DAMAGES.  
Third party services may be terminated or interrupted at any time, and Samsung makes no representation  
or warranty that any content or service will remain available for any period of time. Content and services  
are transmitted by third parties by means of networks and transmission facilities over which Samsung  
has no control. Without limiting the generality of this disclaimer, Samsung expressly disclaims any  
responsibility or liability for any interruption or suspension of any content or service made available  
through this device.  
Samsung is neither responsible nor liable for customer service related to the content and services.  
Any question or request for service relating to the content or services should be made directly to the  
respective content and service providers.  
ꢅ0  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
License  
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol  
are trademarks of Dolby Laboratories.  
Manufactured under license under U.S. Patent #’s : 5,451,942; 5,956,674; 5,974,380;  
5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567  
& other U.S. and worldwide patents issued & pending. DTS and the Symbol are  
registered trademarks, & DTS-HD, DTS-HD Master Audio, and the DTS logos are  
trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.  
DivX  
®
-
-
ABOUT DIVX VIDEO : DivX is a digital video format created by DivX, Inc.  
®
This is an official DivX Certified device that plays DivX video.  
®
ABOUT DIVX VIDEO-ON-DEMAND : This DivX Certified device must be registered in order to  
play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the  
DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to  
complete your registration.  
®
®
-
-
-
DivX Certified to play DivX video up to HD 1080p, including premium content.  
®
®
DivX , DivX Certified and associated logos are trademarks of DivX, Inc. and are used under license.  
Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274.  
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks  
or registered trademarks of HDMI Licensing LLC in the United States and other  
countries.  
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names  
may be trademarks of their respective owners  
This license is limited to private non-commercial use by end-user consumers for licensed contents.  
No rights are granted for commercial use. The license does not cover any product unit other than this  
product unit and the license does not extend to any unlicensed product unit or process conforming to  
ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit.  
The license only covers the use of this product unit to encode and/or decode audio files conforming to  
the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features  
or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.  
Open Source License Notice  
-
In the case of using open source software, Open Source Licenses are available on the product  
menu.  
Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.  
This item incorporates copy protection technology that is protected by U.S. patents and other  
intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.  
English  
ꢅ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY TO ORIGINAL PURCHASER  
This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original  
consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited  
warranty period of:  
One (1) Year Parts and Labor*  
(*90 Days Parts and Labor for Commercial Use)  
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United  
States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures.  
Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be  
presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the  
product to and from the service center is the responsibility of the purchaser.  
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts  
or products if found to be defective during the limited warranty period specified above. All replaced parts and products become  
the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original  
warranty, or ninety (90) days, whichever is longer.  
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set  
forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an “AS  
IS” basis.  
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.  
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the  
extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following,  
including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this  
product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire,  
water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories,  
applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this  
product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure  
to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the  
instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other  
signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.  
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES  
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY  
OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED  
ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH  
RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF  
REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR  
CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF  
THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY  
OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE  
PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING  
THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND  
PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY  
TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS  
LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS  
NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.  
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or  
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights,  
and you may also have other rights which vary from state to state.  
To obtain warranty service, please contact SAMSUNG customer care center.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contact SAMSUNG WORLD WIDE  
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG  
customer care center.  
Area  
Contact Center  
Web Site  
Area  
Contact Center   
Web Site  
0700 Samsung (0700 726  
7864)  
` North America  
Canada  
Serbia  
1-800-SAMSUNG (726-7864)  
Slovakia  
0800-SAMSUNG (726-7864)  
Mexico  
01-800-SAMSUNG (726-7864) www.samsung.com  
Spain  
902-1-SAMSUNG (902 172 678) www.samsung.com  
U.S.A  
1-800-SAMSUNG (726-7864)  
Sweden  
0771 726 7864 (SAMSUNG)  
` Latin America  
Argentine  
Brazil  
ch_fr/(French)  
0800-333-3733  
0800-124-421 / 4004-0000  
800-SAMSUNG (726-7864)  
01-8000112112  
0-800-507-7267  
1-800-751-2676  
1-800-10-7267  
800-6225  
0848-SAMSUNG (7267864,  
Switzerland  
CHF 0.08/min)  
Chile  
U.K  
0330 SAMSUNG (7267864)  
0818 717100  
Colombia  
Costa Rica  
Dominica  
Ecuador  
Eire  
Lithuania  
Latvia  
8-800-77777  
8000-7267  
Estonia  
` CIS  
800-7267  
El Salvador  
Guatemala  
Honduras  
Jamaica  
1-800-299-0013  
800-7919267  
Russia  
Georgia  
Armenia  
Azerbaijan  
8-800-555-55-55  
8-800-555-555  
0-800-05-555  
-
-
-
1-800-234-7267  
00-1800-5077267  
800-7267  
Nicaragua  
Panama  
088-55-55-555  
8-10-800-500-55-500  
(GSM: 7799)  
Kazakhstan  
Uzbekistan  
Kyrgyzstan  
Tadjikistan  
Peru  
0-800-777-08  
Puerto Rico  
1-800-682-3180  
8-10-800-500-55-500  
00-800-500-55-500  
8-10-800-500-55-500  
Trinidad &  
Tobago  
1-800-SAMSUNG (726-7864)  
0-800-100-5303  
Venezuela  
` Europe  
Albania  
ua_ru  
Ukraine  
0-800-502-000  
42 27 5755  
-
Belarus  
810-800-500-55-500  
00-800-500-55-500  
-
-
0810 - SAMSUNG (7267864,  
€ 0.07/min)  
Austria  
Moldova  
` Asia Pacific  
be (Dutch)  
Australia  
1300 362 603  
Belgium  
02-201-24-18  
be_fr (French)  
New Zealand  
China  
0800 SAMSUNG (0800 726 786) www.samsung.com  
400-810-5858 / 010-6475 1880 www.samsung.com  
Bosnia  
Bulgaria  
Croatia  
05 133 1999  
07001 33 11  
-
Hong Kong  
(852) 3698 4698  
hk_en/  
062 SAMSUNG (062 726 7864) www.samsung.com  
800-SAMSUNG (800-726786)  
3030 8282 / 1800 110011 /  
India  
Samsung Zrt., česká organizační  
1800 3000 8282 / 1800 266 8282  
Czech  
složka, Oasis Florenc, Soko-  
0800-112-8888 /  
021-5699-7777  
Indonesia  
lovská394/17, 180 00, Praha 8  
Denmark  
Finland  
France  
Germany  
70 70 19 70  
Japan  
0120-327-527  
1800-88-9999  
030 - 6227 515  
01 48 63 00 00  
Malaysia  
1-800-10-SAMSUNG(726-7864) /  
1-800-3-SAMSUNG(726-7864) /  
1-800-8-SAMSUNG(726-7864) /  
02-5805777  
01805 - SAMSUNG (726-7864  
€ 0,14/Min)  
Philippines  
Hungary  
06-80-SAMSUNG (726-7864)  
800-SAMSUNG (726-7864)  
+381 0113216899  
261 03 710  
Singapore  
Thailand  
Taiwan  
1800-SAMSUNG (726-7864)  
Italia  
1800-29-3232 / 02-689-3232 www.samsung.com  
Kosovo  
-
0800-329-999  
1 800 588 889  
Luxemburg  
Macedonia  
Montenegro  
Vietnam  
` Middle East  
Bahrain  
023 207 777  
-
-
020 405 888  
8000-4726  
0900-SAMSUNG  
Netherlands  
Norway  
Poland  
(0900-7267864) (€ 0,10/Min)  
Egypt  
08000-726786  
800-22273  
815-56 480  
Jordan  
0 801 1SAMSUNG (172678)  
/ 022-607-93-33  
Morocco  
Oman  
080 100 2255  
800-SAMSUNG (726-7864)  
9200-21230  
Portugal  
80820-SAMSUNG (726-7864)  
Saudi Arabia  
Turkey  
1. 08010 SAMSUNG (72678) -  
doar din reţeaua Romtelecom,  
tarif local  
444 77 11  
U.A.E  
800-SAMSUNG (726-7864)  
Rumania  
` Africa  
2. 021.206.01.10 - din orice  
reţea, tarif normal  
Nigeria  
0800-SAMSUNG (726-7864)  
0860-SAMSUNG (726-7864 )  
South Africa  
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUESTIONS OR COMMENTS?  
COUNTRY  
CALL  
OR VISIT US ONLINE AT  
WRITE  
Samsung Electronics America, Inc.  
85 Challenger Road Ridgefield Park,  
NJ 07660-2112  
1-800-SAMSUNG  
IN THE US  
(726-7864)  
AK68-02030A-00  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Headphones 17 890 User Guide
RCA Cordless Telephone 27930 User Guide
Regency Indoor Fireplace L900E NG User Guide
Revolabs Digital Camera 01 USBAUD35 KIT User Guide
RIDGID Saw MS1250LZA User Guide
Roper Range W10204318A User Guide
Russound Satellite Radio CAM66X S1 S2 User Guide
Samsung All in One Printer CLX 6200 User Guide
Samsung Answering Machine Smt i5210 User Guide
SATO Printer CL408e 412e User Guide