SPH-i325
P O R T A B L E D u a l - M o d e
T E L E P H O N E
User Guide
Please read this manual before operating your phone, and keep it for
future reference.
BMC_i325_UG_EN_05072008_F1
Download from Www.Somanuals.com. All Manuals Search And Download.
Disclaimer of Warranties; Exclusion of Liability
Except as set forth in the express warranty contained on the warranty page enclosed
with the product, the purchaser takes the product "as is", and Samsung makes no
express or implied warranty of any kind whatsoever with respect to the product,
including but not limited to the merchantability of the product or its fitness for any
particular purpose or use; the design, condition or quality of the product; the
performance of the product; the workmanship of the product or the components
contained therein; or compliance of the product with the requirements of any law,
rule, specification or contract pertaining thereto. Nothing contained in the
instruction manual shall be construed to create an express or implied warranty of
any kind whatsoever with respect to the product. In addition, Samsung shall not be
liable for any damages of any kind resulting from the purchase or use of the product
or arising from the breach of the express warranty, including incidental, special or
consequential damages, or loss of anticipated profits or benefits.
Privacy
The privacy and copyright laws of Canada govern the disclosure, reproduction and
distribution of data, media and other content, including music and video content.
Certain activities, including downloads or transfer by any means (including, via
cable, Bluetooth® or otherwise) of such content may be an infringement of privacy
or copyright law. Neither Samsung Electronics Canada Inc. nor any of its affiliates
shall be liable or responsible for any data or content disclosed, reproduced,
downloaded or distributed by the user of this equipment.
Warning
Depending on the user interface used in the handset, you may experience slow
keypad response when performing tasks in the background. This can impact making
phone calls. When there is no activity or change in the icons at the top of the main
LCD display, the handset will resume normal operations.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Getting Started................................................................................... 1
Setting Up Your Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Getting Started With Your Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Using your Device to Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Setting Up Your Voicemail (Optional Feature) . . . . . . . . . . . . . . . . . . . . . . . . 4
Phone Basics...................................................................................... 5
Front View of Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Rear and Side Views of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Turning Your Phone On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Viewing the Display Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Using Softkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using the End Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Completing a Hard Reset of the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Features of Your Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Using Your Phone’s Battery and Charger. . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Using the Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Navigating Through Device Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Displaying Your Phone Number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Making and Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Settings............................................................................................ 29
Sounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Location Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Call Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
TTY Use with Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Discreet Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Device Customization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Using Speed Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Device Security ................................................................................ 47
Accessing the Security Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Using Your Device’s Lock Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Using Special #s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Using Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Managing Certificates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Resetting Your Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Download from Www.Somanuals.com. All Manuals Search And Download.
Roaming........................................................................................... 52
Setting Your Device’s Roam Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Call History....................................................................................... 54
Viewing History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Call History Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Making a Call From the Call History. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Saving a Phone Number From Call History . . . . . . . . . . . . . . . . . . . . . . . . . 56
Deleting Call History Entries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Contacts........................................................................................... 58
Adding a New Contacts Entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Assigning Speed Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Finding Contacts Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Contacts Entry Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Adding a Phone Number to a Contacts Entry. . . . . . . . . . . . . . . . . . . . . . . . 62
Editing a Contacts Entry’s Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Editing a Contacts Entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Deleting Contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Beaming a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Selecting a Ringer Type for an Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Tools................................................................................................ 64
Using Your Device’s Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Using Your Device’s Alarm Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Using Your Device’s Notepad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Using Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Managing Voice Memos. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Using the Tip Calculator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Using the Calculator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Using the Smart Converter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Using the Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Using the World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
File Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Task Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
microSD........................................................................................... 77
Using Your Device’s microSD Card and Adapter. . . . . . . . . . . . . . . . . . . . . 77
microSD Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
microSD Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Connecting Your Device to Your Computer. . . . . . . . . . . . . . . . . . . . . . . . . 80
General Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Camera............................................................................................. 83
Taking Pictures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Adjusting Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Recording Videos. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Download from Www.Somanuals.com. All Manuals Search And Download.
Working with Pictures and Videos. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Sending Pictures and Videos by Email. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Printing Pictures via Bluetooth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Bluetooth.......................................................................................... 96
Turning Bluetooth On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Using the Bluetooth Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Bluetooth Profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Bluetooth Information Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Pairing Bluetooth Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Beaming Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Using Hands-Free Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Bluetooth OBEX FTP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Using a Bluetooth Virtual Serial Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Applications ................................................................................... 106
Launching Internet Explorer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Using Live Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Using the RSS Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Podcasts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Using Internet Sharing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Synchronizing with ActiveSync ...................................................... 112
ActiveSync Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Synchronization Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Setting Up and Configuring ActiveSync . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Connecting with Your Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Setting up Windows Media Player Sync Options. . . . . . . . . . . . . . . . . . . . 116
Synching Music via Windows Media Player . . . . . . . . . . . . . . . . . . . . . . . 117
Service Features............................................................................. 119
Using Voicemail (Optional Feature) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Using SMS Text Messaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Using Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
What You Will Need to Set Up Your IMAP or POP3 Account . . . . . . . . . . 124
Using Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Responding to Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Making a Three-Way Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Using Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Voice Command............................................................................. 130
Voice Command Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Making a Call With Voice Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
GSM Service Mode......................................................................... 132
Your SIM Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Using Your Device in GSM Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting GSM Services Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Selecting a Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
SMS Sending Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Safety............................................................................................. 142
Getting the Most Out of Your Reception . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Maintaining Safe Use of and Access to Your Phone . . . . . . . . . . . . . . . . . 143
Using Your Phone With a Hearing Aid Device . . . . . . . . . . . . . . . . . . . . . . 145
Caring for the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Owner’s Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
User Guide Proprietary Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Warranty ........................................................................................ 150
Index.............................................................................................. 153
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Setting up service on your new device is quick and easy. This section walks you
through the necessary steps to set up, turn on, and unlock your device; set up
your voicemail; establish passwords; and contact your service provider for
assistance with your service.
Setting Up Your Device
1. Remove the battery cover.
• Press down with thumbs as indicated below.
• While applying pressure, slide cover away from the camera lens (as
shown below).
2. Install the battery.
• Insert the battery into the opening on the back of the device, making
sure the connectors align. Gently press down to secure the battery.
• Position the battery cover and firmly slide it in until you hear a click.
Getting Started
1
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press
to turn the device on.
• Your device will turn on, search for
service, and then enter standby mode.
• If your device is not yet activated, or if it
is locked, contact your service provider
to activate your device.
Initial Setup
After you have powered on your device, you may wish
to set some basic options. After the initial power-up,
your device will display the Windows Mobile® screen
where you will be guided through a series of setup
procedures.
1. From the initial screen, press Next (right
softkey) to begin the setup process.
2. Use both the navigation key and keypad to enter new values within the
date and time fields. See "Configuring the Time and Date" on page 45.
• To toggle between AM and PM, highlight the AM/PM field and then
press either A (for AM) or P (PM) on the keypad.
3. Press Next (right softkey) to continue on to the password setup screen
where you can create a password, which must be used to access your
device’s features and data. See "Locking Your Device with a Password"
on page 47.
– or –
Skip to the next step if you do not wish to assign a password at this
time.
4. Select “Prompt if device unused for” and press
. (Enabling this
option activates the remaining fields.)
5. Select each field and enter the desired information:
• Minutes: to select the amount of unused time (idle) required before
you are prompted for a password.
• Password type: to choose from one of the following PIN types:
• Simple PIN: must be at least four characters in length and cannot
contain a simple sequence such as 0000, 1111, or 1234.
2
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
• Strong alphanumeric: must be at least seven characters in length
and must contain at least three characters from each of the
following categories: uppercase/lowercase letters, numerals, and
symbols.
• Password: use the keypad to enter the desired password.
• Confirm password: use the keypad to re-enter the same password.
6. Press Done (left softkey) to store these settings.
7. From the Email screen, press Skip (left softkey) to return to the email
account setup process at a later time, or press Next (right softkey) to
continue with the setup process.
• For more information, please see "Using Email" on page 123.
Note: Some data connection charges may apply during the feedback update
process.
Note: Your device’s battery should have enough charge to power on the device,
find a signal, set up your voicemail, and make a call. You should fully charge your
battery as soon as possible. See "Charging the Battery" on page 15.
Getting Started With Your Service
Determining Whether Your Device Is Activated
If you purchased your device at a store, it is probably activated, unlocked, and
ready to use. If you received your device in the mail, it has probably already been
activated; all you need to do is unlock it.
If your device is not activated, please call your service provider.
Note: If you don't set the device lock, the device is not locked when you first turn it
on.
Locking Your Device
1. Press
• The device is unlocked by default.
2. Press and select Lock or press
to turn the device on.
to set the phone lock.
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Unlocking Your Device
1. Enter your password using the keypad.
2. Press Unlock (left softkey).
Note: To select a softkey, press the softkey button directly below the softkey text
that is displayed at the bottom left and bottom right of your device’s display screen.
Softkey actions change according to the screen you’re viewing and will not be
displayed if there is no corresponding action available.
Using your Device to Call
1. Use your keypad to enter a phone number.
2. Press
.
See "Making and Answering Calls" on page 18.
Setting Up Your Voicemail (Optional Feature)
All unanswered calls to your device are automatically transferred to your voicemail,
even if your device is in use or turned off. Therefore, you will want to set up your
voicemail and personal greeting as soon as your device is activated.
1. From standby mode, press and hold
2. Follow the system prompts to:
• Create your passcode.
.
• Record your name announcement.
• Record your greeting.
For more information about using your voicemail, see "Using Voicemail (Optional
Feature)" on page 119.
4
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone Basics
Your device is packed with features that simplify your life and expand your ability
to stay connected to the people and information that are important to you. This
section guides you through the basic functions and calling features of your device.
Front View of Phone
1. Earpiece
18. Navigation
Key
2. Display Screen
3. OK Key
17. Right Softkey
4. Left Softkey
5. Talk Key
16. End Key
6. Home/
Task Manager Key
15. Back/Clear
Key
7. Voicemail Key
14. Keypad
8. Function Key
13. Camera Key
12. Microphone
9. Plus Code
Dialing Key
11. Messaging Key
10. Space/Silent
Mode Key
1. Earpiece: The Earpiece allows you to hear the caller.
2. Display Screen: The Display Screen shows signal and battery strength,
time, day, and date. It also displays incoming calls or messages.
3. OK key: Pressing when navigating through a menu accepts the
highlighted choice in a menu. Pressing this key also begins a new line
when writing memos or messages.
4. Left Softkey: Allows you to select softkey actions or menu items
corresponding to the bottom left line on the display screen.
5. Talk Key: Allows you to place or receive a call. Press the key once to
access the recent call log.
Phone Basics
5
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Home/Task Manager key: Press to return to the Home Screen from any
menu, submenu, or application. Press and hold to launch Task Manager.
7. Voicemail key: Allows you to automatically dial your voicemail.
8. Function Key: Allows you to quickly launch predefined applications or
activate specific functionality. This feature is activated by pressing and
holding the key in conjunction with other specified keys. When entering
text, press to enter numbers or specific characters on the keypad.
9. Plus Code Dialing Key: Automatically dials the international access
code for the country in which you are located.
10. Space/Silent Mode Key: Adds either a space to a text entry or activates
the device’s silent mode. Press briefly to insert a blank character space
into a message. In idle mode, press and hold to put your device in silent
mode.
11. Messaging Key: Allows you to access either the SMS Inbox or Message
Composer. Press briefly to access the SMS (Text message) Inbox. Press
and hold to launch the Text Message Composer (for new messages).
12. Microphone: The Microphone allows the other caller to hear you clearly
when you are speaking to them.
13. Camera Key: Press and hold to access the Camera preview.
14. Keypad: Allows you to enter numbers, letters, and characters using a
full keypad interface that has the same layout as a computer keyboard.
15. Back/Clear Key: Deletes characters from the display when you are in
text entry mode. Press to return to the previous menu or screen when
navigating features on your phone.
16. End Key: Ends a call or returns to standby mode. Press and hold this
key for two seconds to lock the keypad. While in the main menu, it
returns the phone to standby mode and cancels your input.
17. Right Softkey: Allows you to select softkey actions or menu items
corresponding to the bottom right line on the display screen. For
example, when you receive an incoming call, you would press Ignore
(right softkey) to reject the call and route it to your voicemail.
18. Navigation Key: This key allows you to scroll through the phone menu
options.
6
Phone Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear and Side Views of Your Phone
1. Mirror
5. External Speaker
4. Camera Lens
3. Battery Cover
2. Thumbwheel
9. microSD Slot
8. Power Button
7. Volume Key
6. Power/Accessory
Interface Connector
10. Back-Clear/
Camera Access Key
Phone Basics
7
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Mirror: Displays your reflection when taking pictures and videos.
2. Thumbwheel: Allows you to navigate through menu options. Press
briefly to either select an option or execute the selected application.
Press and hold to display the Quick Launcher screen (as shown on page
10).
3. Battery Cover: Covers and secures the internal battery and the SIM
card.
4. Camera Lens: Allows you to take photos or shoot video.
5. External Speaker: Allows you to hear the other caller and the different
ring tones or sounds offered by your device.
6. Power/Accessory Interface Connector: Allows you to plug in the travel
adapter (power), PC connection cable (data transfer), and optional
headset for convenient hands-free conversations.
7. Volume Key: Allows you to adjust the earpiece volume or adjust the
voice volume during a call.
8. Power Button: Press and hold to turn the device on or off. When the
device is on, a short press displays the Quick List screen.
9. microSD™ card slot: Allows you to use the microSD card to expand the
memory of your device.
10. Back-Clear/Camera Access Key: Allows you to clear an entry and
return to a previous menu. This button is also user-configurable. (See
"Device Customization" on page 43.) Press briefly to either clear an entry
or go back to a previously active menu. Press and hold to launch the
camera mode.
Turning Your Phone On and Off
To turn your phone on:
• Press and hold the Power button
, located at the top of the device, to
turn your phone on.
Once your phone is On, it displays an icon which indicates that your phone is
searching for a signal. When your phone finds a signal, it automatically enters
standby mode – the phone’s idle state. At this point, you are ready to begin making
and receiving calls.
8
Phone Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
If your phone is unable to find a signal after 15 minutes of searching, a Power Save
feature is automatically activated. When a signal is found, your phone
automatically returns to standby mode.
In Power Save mode, your phone searches for a signal periodically without your
intervention.
Tip: The Power Save feature helps to conserve your battery power when you are in
an area where there is no signal.
To turn your phone off:
• Press and hold the Power button
for two or more seconds until you see
the powering down animation on the display screen.
• Briefly press the Power button to access the Quick List, highlight
Power off, and press
.
Your screen remains blank while your phone is off (unless the battery is charging).
Viewing the Display Screen
Your device’s display screen provides information about your device’s status and
options. The Home Screen shows items such as menu icons and other listings.
(For more information see page 31.)The display can be divided into the following
main areas:
• Status Icons: indicates your device’s current status.
• Recently Used Apps.: provides an icon list of recently accessed/used
applications or features. This list becomes updated with each consecutive
application or feature which is accessed/used.
• Upcoming Events: displays the nearest upcoming event in your calendar.
Select it and press
to access your Today Calendar.
• Message Access: provides quick access to the different message types:
SMS (text messages), Email, and Voicemail.
• Taskbar/Softkey: provides access to Windows Mobile features such as the
Start menu and Contacts.
• Quick Launcher: appears as a scrollable list at the far right of the screen
when the thumbwheel is pressed and held for more than three seconds.
Phone Basics
9
Download from Www.Somanuals.com. All Manuals Search And Download.
The following list identifies the icons you’ll see on your phone’s display screens:
displays your current signal strength. When you are receiving maximum
signal strength, six bars are shown.
indicates the wireless feature has been turned off. Your device is in Flight
mode and your cellular radio is turned off.
X
indicates there is no service available and your phone is searching for a
network.
indicates the 1xRTT high speed data transfer protocol is currently in use.
indicates your device has high speed data service (Ev-Do protocol), which
is required for video streaming and downloads.
Ev
indicates that your phone is in a roaming area.
R
indicates the Voice Command feature is active and awaiting a verbal
command.
indicates a call is in progress and provides its signal strength.
indicates you missed a call.
indicates the speakerphone is enabled.
indicates that you have a new text message.
indicates that you have a new voice mail.
indicates that you have a new email message.
indicates your device’s location feature is active.
indicates your device’s location feature is inactive.
indicates the device has not detected an internal GSM SIM card.
indicates ringer volume is set to vibrate.
X
indicates Silence All mode is enabled. The ringer for the selected profile is
set to off.
X
10 Phone Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
indicates your device is operating in TTY mode.
indicates that the Camera is enabled.
indicates that the Camcorder is enabled.
indicates that the self-timer function is enabled. With the self timer
enabled, a set amount of time is required prior to taking a picture.
OFF
indicates the Single Shot mode. This is used to take a single picture.
indicates the Multi Shot mode. This is used to take a series of pictures.
6
indicates the Mosaic Shot mode. This is used to take a series of four
pictures displayed in a 2x2, side-by-side, or top/bottom pattern.
indicates the Night Shot mode. This is used to take a picture in low light
levels.
indicates that the white balance has been set to Automatic.
AUTO
indicates that the white balance has been set to Daylight. This is used for
taking pictures outdoors.
indicates that the white balance has been set to Cloudy. This is used for
taking pictures outdoors under cloudy conditions.
indicates that the white balance has been set to Tungsten. This is used for
taking pictures indoors under normal lighting conditions.
indicates that the white balance has been set to Fluorescent. This is used
for taking pictures indoors under fluorescent lighting conditions.
indicates the No effects mode.
x
indicates the Sepia effect mode. This applies a Sepia color tone to the
sx picture.
indicates the B/W effect mode. This applies a black and white color tone
B/W to the picture.
x
indicates the Negative effect mode. This applies a color tone of a film
negative to the picture.
N
x
launches the shortcut key screen for both camera and camcorder mode.
HELP
launches the options menu for both the camera and camcorder.
indicates battery charge level (icon shown is full).
Phone Basics 11
Download from Www.Somanuals.com. All Manuals Search And Download.
indicates battery charge level indicates battery charge level (icon shown
fully discharged and device will power down).
indicates battery is being charged.
indicates that Bluetooth technology is active and enabled.
Using Softkeys
Softkeys are special keys whose functions are determined by the currently active
dialog, menu, or page. The current function for these keys is displayed above them
on the screen. Your device has a left (
) and a right (
) softkey.
Using the End Key
The
key can function differently depending on your current task, location, and
the length of the press.
In Idle mode, while in a menu or page:
• A brief press takes you back to the Home Screen.
• A longer press locks the device.
While in a voice call:
• A brief press hangs up the current call.
Completing a Hard Reset of the Device
WARNING: This reset will delete any installed applications or personal information
saved to the device. Contacts stored on the SIM card will not be deleted.
1. Remove the storage card from the device, if one is present.
Note: A hard reset will erase the cipher key used for encrypting data on the
microSD card. Please ensure that all personal data stored on this card is backed up
to a computer so that it can later be transferred back to the memory card.
2. With the phone powered off:
• Press and hold both the left and right softkeys.
• While both softkeys are held down, press and hold the Power Button
until the unit powers on.
3. As the device begins to power on, release both softkeys.
12 Phone Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Once the phone powers on, you should see an onscreen alert message (a
white screen with blue text). If you do not see this screen, let the device power up
normally, turn it off again, and then repeat steps 2 and 3.
4. Immediately after the alert screen appears, press the left softkey.
Note: You have only five seconds to press the left softkey. Otherwise, the device
will start up normally and the reset will be unsuccessful.
5. If the reset was successful, the device displays a pop-up message
stating the device is currently reformatting. This process can take
several minutes. Allow the process to finish without interruption.
6. When the device has finished resetting, follow the Windows Mobile
setup instructions displayed on the screen. See "Initial Setup" on page 2.
Features of Your Device
The Samsung i325 is lightweight, easy-to-use, and reliable, and it offers many
features and service options. The following list previews some of those features
and provides page numbers where you can find out more:
• Digital dual-band capability allows you to make and receive calls while on
the network and to roam on other 1900 and 800 MHz digital networks
where Bell Mobility has implemented roaming agreements.
• Included GSM SIM card allows you to expand your calling options using
GSM technology while travelling in GSM only areas. This card comes in-box
and may have been installed at time of activation. (page 132).
• Windows Mobile® 6 comes pre-installed and converts this device into a
portable computer that can use Microsoft® applications such as Outlook®.
(For more information, please see "Using Email" on page 123.)
• The Samsung i325 uses ActiveSync® 4.5 to keep your computer and your
device synchronized (page 112).
• SMS Text Messaging (page 120) provides quick and convenient messaging
capabilities.
• Voice Command lets you dial device numbers by speaking a name or a
device number (page 130).
• Your Contacts list can be stored onto your Phone (page 58).
Phone Basics 13
Download from Www.Somanuals.com. All Manuals Search And Download.
• The built-in Calendar offers several personal information management
features to help you manage a busy lifestyle (page 64).
• The Location feature works in connection with available location-based
services (page 35).
• The keypad lets you quickly type messages (page 25).
• Speed dial lets you dial device numbers with one or two key presses (page
24).
• The Internet Sharing feature lets you use your device as a modem to
connect your computer to the Internet anywhere on the network (page
110).
Using Your Phone’s Battery and Charger
WARNING: Use only Samsung-approved batteries and chargers with your device.
Failure to use a Samsung approved battery and charger may increase the risk that
your device will overheat, catch fire, or explode, resulting in serious bodily injury,
death, or property damage.
Battery Capacity
Your phone is equipped with a Lithium Ion (LiIon) battery. It allows you to recharge
your battery before it is fully drained.
When the battery runs low, the battery icon will blink to remind you to recharge the
battery. When the battery capacity is close to completely drained, the phone
sounds an audible alert and then powers down.
Note: Long backlight settings, low signal strength, searching for service, vibrate
mode, playing games, or browser use affect the battery’s talk and standby times.
Tip: Be sure to watch your phone’s battery level indicator and charge the battery
before it runs out of power.
Installing the Battery
See ‘Setting Up Your Device” on page 1 for instructions on installing the battery.
14 Phone Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Battery
1. Make sure the power is off so that you don’t lose any stored numbers
or messages.
2. Press down on the upper end of the battery compartment cover (just
above the embossed Samsung logo), slide the cover off, and remove
the battery from the device.
WARNING: Do not handle a damaged or leaking Lilon battery as you can be
burned.
Charging the Battery
Your phone’s LiIon battery is rechargeable and should be charged as soon as
possible so you can begin using your phone.
Keeping track of your battery’s charge is important. If your battery level becomes
too low, your phone automatically turns off and you will lose all the information you
were just working on. For a quick check of your phone’s battery level, glance at the
battery charge indicator located in the upper-right corner of either of your phone’s
display screens.
indicates that the battery is full. If the battery charge is
getting too low, the battery icon
tone.
appears and the phone sounds a warning
Always use a Samsung-approved desktop charger, travel adapter, or vehicle power
adapter to charge your battery.
Phone Basics 15
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING! FOR CONNECTION TO AN ELECTRICAL SUPPLY NOT LOCATED IN
NORTH AMERICA, YOU MUST USE AN ADAPTER OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. USE OF THE WRONG ADAPTER
COULD DAMAGE YOUR PHONE AND VOID YOUR WARRANTY. IMPORTANT
SAFETY INSTRUCTIONS - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS. THIS POWER UNIT IS INTENDED
TO BE CORRECTLY ORIENTED IN A VERTICAL OR HORIZONTAL OR FLOOR
MOUNT POSITION.
Note: You must unplug the adapter before removing the battery from the phone
during charging to avoid damage.
Using the Charger
1. Locate the interface connector on the side of the phone and pull out and
turn the plastic cover.
2. Plug the terminal end of the adapter into the phone’s interface
connector, orienting the adapter’s gold contact pin upward.
Correct
+
Incorrect
3. Plug the other end into an electrical outlet.
4. An animated battery icon is displayed on the main screen. The icon
provides an indication of whether the battery is being charged or is fully
charged.
16 Phone Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: It takes approximately 4 hours to fully recharge a completely drained
standard battery. With the Samsung approved LiIon battery, you can recharge the
battery before it drains completely.
Navigating Through Device Menus
The navigation key on your device lets you scroll through menus quickly and
easily. The scroll bar at the right of the menu keeps track of your position in the
menu at all times.
To navigate through a menu, one option is to press the navigation key up or down.
If you are in a first-level menu, such as Settings, you may navigate to the next
menu by pressing
or to the previous menu by pressing
.
A second navigation option is to use the thumbwheel located on the right side of
the device. While in a list, the thumbwheel can be used to quickly scroll through
available options.
Selecting Menu Items
As you navigate through a menu, options are
highlighted. Select any numbered option by
pressing the corresponding number on the
device’s keypad. You may also select an item by
highlighting it and pressing
.
For example, if you want to adjust a device setting:
1. Press Start (left softkey) to access the
main menu.
2. Select Settings, and then select Sounds
by pressing
or by highlighting it
(using either the navigation key or thumbwheel) and press
.
Note: For the remainder of this guide, these steps condense into “Press Start >
More > More > Settings > Sounds.”
Backing Up Within a Menu
To go to the previous menu:
• Press
.
Phone Basics 17
Download from Www.Somanuals.com. All Manuals Search And Download.
To return to standby mode:
or
• Press
.
Displaying Your Phone Number
• Press Start > More > More > Settings > More... > More... > Phone
Information. (Your phone number and other information about your device
will be displayed.)
Making and Answering Calls
Making Calls
Placing a call from your device is as easy as making a call from any landline device.
1. Make sure your device is on.
2. Enter a phone number from standby mode. (If you make a mistake while
dialing, press
3. Press
4. Press
to erase the numbers.)
.
to end the call.
Tip: To redial your last outgoing call, press TALK (
) twice. When making calls
outside your service provider’s network, always dial using 11 digits (1 + area code
+ phone number).
You can also place calls from your device by using Voice Command (page 130),
speed dialing numbers from your Contacts (page 24), and using your Call History
listings (page 56).
Dialing Options
When you enter numbers in standby mode, you will see a variety of dialing options
displayed as softkeys on the device’s display screen.
To initiate an option, press the corresponding softkey.
• Save: Enter a seven-digit or ten-digit number (phone number and area
code) and press Save (
) to save the phone number in your Contacts.
(See "Saving a Phone Number" on page 23.)
• Menu: Pressing Menu (
), provides you with the following options:
• Open: Allows you to display information specific to the current caller
(if they have been previously entered into the Contacts list).
• Send Text Message: Allows you to send a text message to the
currently entered (or selected) number.
18 Phone Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
• View: Allows you to filter your onscreen list of numbers by one of
three criteria: Calls and Contacts, All Calls, or Speed Dial.
• The Speed Dial filter allows you to enter a number (1-99) and
then display any speed dial entries which match the specified
speed dial location. Press
to dial the speed dial number. (See
"Assigning Speed Dial Numbers" on page 58.)
Tip: To speed dial a phone number from standby mode, press and hold the speed
dial number. If the speed dial number is two digits, enter the first digit, and then
press and hold the second digit. (This feature will not work when you are roaming
off your service provider’s network; when roaming you must dial using eleven
digits [1 + the area code + the seven-digit phone number.])
Answering Calls
1. Make sure your device is on.
2. Press
to answer an incoming call.
– or –
Press Answer (left softkey). (Depending on your settings, you may also
answer incoming calls by pressing any number key. See "Call Options"
on page 36 for more information.)
Your device notifies you of incoming calls in the following ways:
• The device rings or vibrates.
• The backlight illuminates.
• The screen displays an incoming call message screen.
If the incoming call is from a number stored in your Contacts, the associated name
is displayed. If the incoming caller is not stored in your Contacts list, only the
phone number is displayed. The caller’s assigned image may also be displayed, if
available.
For all incoming calls, the following options are displayed. To select an option,
press the corresponding softkey.
• Answer to answer the incoming call. (This is the same as pressing
.)
• Ignore to send the call to your voicemail box. (This is the same as pressing
.)
Phone Basics 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: When your device is off, calls go directly to voicemail.
Ending a Call
• Press
.
Using Call History
When you place, accept, or miss a call, a record of the call is saved in the Call
History list. When you view the numbers in this list, an icon to the left of the
number indicates the call type:
Dialed: Indicates all outgoing calls made from your device.
Missed: Indicates any missed calls.
Received: Indicates any received calls that were answered.
For more detailed information about Call History, see "Call History" on
page 54.
Making Calls from Call History
1. Press Start > Call History.
2. Use either the navigation key or thumbwheel to scroll through the
available list.
Tip: The previous two steps can be shortened by pressing
from the Home
screen to display a list of recent calls.
3. Highlight the number and press
.
Missed Call Notification
When an incoming call is not answered, the missed call icon (
the top of your screen.
) is displayed at
To display a missed call entry:
1. Press Start > Call History > Menu > Filter > Missed Calls.
2. Select the missed call entry you wish to view. (To call that number,
press
.)
Calling Emergency Numbers
You can place calls to 911 (dial
your account is restricted.
), even if your device is locked or
20 Phone Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: When you place an emergency call, your device automatically enters
Emergency mode.
During an emergency call, press Menu (right softkey) to display your options.
Select an option and press
.
• Unlock to unlock your device (appears only if the device is locked).
To exit Emergency mode:
1. Press
to end a 911 call.
• When calling a non-emergency number or selecting Emergency call
only (default layout), you must select Yes to exit the Emergency call
back mode.
Note: When you are in Emergency mode, you can exit after selecting Emergency
call only. Select Yes at the prompt.
Enhanced 911 (E911) Information
This device features an embedded Global Positioning System (GPS) chip necessary
for utilizing E911 emergency location services where available.
When you place an emergency 911 call, the GPS feature of your device seeks
information to calculate your approximate location. Depending on several
variables, including availability and access to satellite signals, it may take up to 30
seconds or more to determine and report your approximate location.
Important: Always report your location to the 911 operator when placing an
emergency call. Some designated emergency call takers, known as Public Safety
Answering Points (PSAPs) may not be equipped to receive GPS location
information from your device.
In-Call Options
Pressing Menu (right softkey) during a call displays a list of available in-call
features. To select an option, press the corresponding keypad number or select the
option and press
menu:
. The following options may be available through the Options
• Mute/Unmute to toggle the onboard microphone’s mute state (on/off).
Phone Basics 21
Download from Www.Somanuals.com. All Manuals Search And Download.
• Speakerphone On or Speakerphone Off to route the device’s audio through
the speaker or through the earpiece.
• Select Speakerphone On to route the device’s audio through the
speaker. (You can adjust the speaker volume using the volume keys
on the side of the device.)
• Select Speakerphone Off to use the device’s earpiece.
WARNING: Because of higher volume levels, do not place the device near your ear
during speakerphone use.
• Turn Hands free On or Turn Hands free Off to toggle the state of the
Bluetooth hands free feature between on or off when the Bluetooth headset
is connected.
• Contacts to display your Contacts list.
• Save to Contact to store the current phone number as a new entry into your
Contacts list.
• View Calendar to display your calendar entries.
• Call History to display Call History list.
During a call, the left softkey functions as the Mute button. Press it to mute the
device’s microphone for privacy. Press it again to Unmute the device.
End-of-Call Options
After you receive a call from or make a call to a phone number that is not in your
Contacts, the phone number and the duration of the call are displayed. Press Save
(left softkey) to add the new number to your Contacts. (See “Saving a Phone
Number” below.)
After you receive a call from or make a call to a phone number that is already in
your Contacts, the entry name, phone number, and the duration of the call are
displayed.
• Press Menu > View Contact to view the Contacts information for the
number.
22 Phone Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
Saving a Phone Number
Your device can store up to 12 phone numbers in each of 10 Contacts entry types.
Each entry’s name can contain 255 characters. Your device automatically sorts the
Contacts entries alphabetically. (For more information, see "Contacts" on page 58.)
To save a number from standby mode:
1. Enter a phone number and press Save (left softkey).
2. Select <New Contact> and press
.
3. Use the keypad to enter a first and last name for the new contact name.
(You can also choose to update the number at this time.)
4. Use the navigation key to select a number type for the new contact from
one of the following entries:
• Mobile
• Work
• Home
• Work 2
• Home 2
• Company
• Pager
• Car
• Assistant
• Radio
5. Select Save.
Finding a Phone Number
You can search Contacts entries for phone numbers that contain a specific string of
numbers.
1. Enter one or more digits or characters in standby mode. (Both phone
numbers and names matching your entry are displayed. The more
numbers or characters you enter, the more specific the search
becomes.)
• Although your current Contacts list is displayed in alphabetical order,
any recent numbers matching the criteria are displayed.
2. To dial the number, press
.
Phone Basics 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Plus (+) Code Dialing
When placing international calls, you can use Plus Code Dialing to automatically
enter the international access code for your location. This key can also be assigned,
not only for an International prefix, but also for a Country code and City code. See
"Assigning an International Country Code" on page 37.
1. Press and hold
until a “+” is displayed on your device’s display
screen.
2. Dial the country code and phone number you’re calling, and press
(The access code for international dialing will automatically be dialed,
followed by the country code and phone number.)
.
Dialing From the Contacts List
1. Press Contacts (right softkey) to list the entries.
2. Use the thumbwheel to scroll through the list of available contacts and
select the entry you want to call.
3. Press
to dial the entry’s default phone number.
– or –
To dial another number assigned to the contact entry, select the name
and press
, and then select a number and press
.
Using Speed Dialing
You can store up to 99 numbers in your device’s speed dial memory to make
contacting friends and family as easy as pressing a button or two. With this feature,
you can dial speed dial entries using one keypress for locations 1–9 or two
keypresses for locations 10–99.
To use One-Touch Dialing for speed dial locations 1–9:
• Press and hold the appropriate key for approximately two seconds.
• If a number has been assigned to the current number, the display
confirms that the number has been dialed when it shows “Dialing...”.
• If an application has been assigned to the number, the corresponding
application will launch.
To use Two-Touch Dialing for speed dial locations 10–99:
1. Press the first digit.
2. Press and hold the second digit for approximately two seconds. The
display confirms that the number has been dialed when it shows
“Dialing...”.
24 Phone Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
To manage all of your speed dial entries, press Start > More > Accessories >
Speed Dial.
See "Using Speed Dial" on page 44.
Note: You cannot use numbers ending in “0” (10, 20, etc.) for speed dial
locations.
Entering Text
Selecting Characters
Your device provides convenient ways to enter words, letters, punctuation, and
numbers whenever you are prompted to enter text (for example, when adding a
Contacts entry or when using Microsoft® Outlook® and SMS Text Messaging).
The built-in keypad supports quick and easy text input, just as you would when
using a computer’s keyboard.
1. When you display a screen where you can enter text, use the keypad to
enter different character types:
Note: The
key can also be used to quickly launch up to four user-defined
features or applications. See "Customizing the Function Key" on page 43.
Function: Allows you to use characters displayed at the top of the blue
QWERTY keys. Examples: $, @, #, ?
Caps/Shift: Converts the alphabetic character into uppercase. Changes the
text input mode to Upper/Lower case mode.
Symbol: Launches the Symbols page from where you choose from an
extensive list of symbols and other character sets.
Enter: Moves the insertion point to the next line in a message.
Delete Character: Deletes the previous character, similar to the backspace
key on a computer keyboard.
Phone Basics 25
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Select one of the following character types:
• Letters to enter the alphabetic characters associated with each key
• oNnumthbeekrseytpoaedn.t(eSreneupmabgeers26b.y) pressing the numbers on the keypad.
• (SSyemebpoalgseto27en.)ter symbols and “emoticons.” (See page 27.)
• Word Completion to disable or change Word Completion settings.
To change Word Completion settings, press Start > More > More >
Settings > More... > Word Completion.
The keypad provides dual-use keys labeled with alphabetic characters on the lower
half and numbers and symbols on the upper half. Press the key corresponding to
the character you want to enter.
Entering Characters
Entering Uppercase and Lowercase Letters
1. Press
to make the next character uppercase. Characters revert back
to lowercase after the next character is typed.
2. Press the corresponding text keys.
• For example, to enter the word “Bill,” type the keypad sequence
below. (If you make a mistake, press
to erase a single character.
Press and hold
to erase an entire word.)
B
i
l
l
• To enter all uppercase characters, press
before each letter.
BILL
26 Phone Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering Numbers
The keypad can be used to enter numbers, letters, and symbols. Although these
keys default to text (letters), numbers can be input by using
with the correct number key.
in conjunction
1. Press
pressed.
to input the character on the top row of the next key
2. Press the corresponding keys. (For example, to enter “9:30,” you
would use the keypad sequence below. If you make a mistake, press
to erase a single character. Press and hold
word.)
to erase an entire
9:30
Entering Symbols and Preset Messages
Symbols can be entered from the keypad (using the
key) or from the Symbols
page (accessed using the
key).
To enter symbols:
1. Position the cursor where you want the symbol to appear within your
message.
2. Press
and use the navigation key to highlight a symbol. Press
to insert the symbol into your message. There are multiple pages of
available symbols.
• Press Next (right softkey) to open the next page of symbols.
• Press Previous (left softkey) to return to the previous page of
symbols.
– or –
Phone Basics 27
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Position the cursor where you want the symbol to appear within your
message.
2. Press
and then press the key for the symbol you wish to insert.
Ted@
To enter preset messages:
1. Position the cursor where you want to insert the preset text into your
message.
2. Press Menu > My Text.
3. Scroll to a preprogrammed message and press
.
Note: Preset messages (My Text) make composing text messages easier by
allowing you to enter predefined text, such as “Meet me at,” or a customized preset
message of your own. (For more information on preset messages, see "Using
Preset Messages" on page 122.)
28 Phone Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
This section describes how to change your device’s settings to best suit your
needs. Take a few moments to review these options and to adjust or add settings
that are right for you.
Sounds
Ringer Type
You can assign ringer types to individual Contacts entries, types of calls, and
types of messages. There are five main sound categories available:
• Ring Tone: assigns ringtones for incoming calls.
• Notification: assigns ringtones for categories such as new email, new text
messages, new voice messages, and new instant messages.
• System Sound: assigns ringtones for system categories such as
Exclamations, Questions, and Warnings.
• Keypad Tone: assigns a tone for use with keypad presses.
• Call Alert: assigns ringtones for call-specific activities such as Minute Beep,
Connection, and Signal Fade.
• R2VS: assigns a simulated audio effect to the sound being routed through a
connected headset.
Selecting Ringer Types for Voice Calls
Your device provides a variety of ringer options that allow you to customize your
ring and volume settings. These options allow you to identify incoming calls by the
ring.
1. Press Start > More > More > Settings > Sounds > Ring Tone.
2. Use your navigation key to scroll through the available ringers. A sample
ringer will sound as you highlight each option.
3. Press Done (left softkey) to assign a ringer.
Selecting Ringer Types for Message Notifications
1. Press Start > More > More > Settings > Sounds > Notification.
2. Select New e-mail, New text message, New voice message, or New
instant message.
3. Use your navigation key to scroll through the available ringers. A sample
ringer will sound as you highlight each option.
4. Press Done (left softkey) to assign a ringer.
Settings 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Ringer Types for System Sounds
1. Press Start > More > More > Settings > Sounds > System Sound.
2. Select Exclamation, Question, or Warnings.
3. Use your navigation key to scroll through the available ringers. A sample
ringer will sound as you highlight each option.
4. Press Done (left softkey) to assign a ringer.
Keypad Tone
Your device offers a number of options for selecting the audible tones
accompanying a keypress.
1. Press Start > More > More > Settings > Sounds > Keypad Tone.
2. Use your navigation key to scroll through the available tones (default is
Click).
3. Press Done (left softkey) to assign a tone.
Call Alert Notification
Your device can alert you with an audible tone when you change service areas,
once a minute during a voice call, or when a call has been connected.
1. Press Start > More > More > Settings > Sounds > Call Alert.
2. Select Minute beep, Connect tone, or Signal fade tone.
3. Select On or Off for each category and press Done (left softkey).
Selecting an R2VS Setting
R2VS™ significantly enhances the quality of mono and stereo audio by simulating
stereo sound through a connected headset, thereby creating improved dynamics
and bass performance. R2VS provides panoramic three-dimensional audio that
extends the sound beyond the speakers or headphones themselves. These
enriching effects are especially noticeable on digitally compressed audio formats
such as MP3 and WMA.
To utilize this feature, your device needs to be connected to a headset via the
Power/Accessory Interface Connector.
1. Press Start > More > More > Settings > Sounds > R2VS.
2. Use your navigation key to scroll through the available stereo settings.
3. Choose None (Mono), 3D Sound, or M-Theater.
4. Press Done (left softkey) to assign a setting.
30 Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
Assigning Sound Profiles
Using profiles, you can adjust and customize device tones for different events or
environments and then apply the settings as a group. The currently selected
profile is displayed in the upper-right section of the Home screen.
1. Press Start > More > More > Settings > Profiles.
2. Select Normal, Silent, Vibrate, Outdoor, or Automatic and press Done
(left softkey).
Tip: You can quickly change the profile by briefly pressing and then releasing the
key. Select the profile you want from the Quick List and press . You can
quickly activate or deactivate the Silent profile by pressing and holding
the Home screen.
from
Customizing Sound Profiles
1. Press Start > More > More > Settings > Profiles.
2. Select the desired profile you want and press Menu > Edit.
3. Use the navigation key (
) to change the settings in each field.
Available options may differ depending on the selected profile.
4. When you have finished, press Done (left softkey).
Resetting a Sound Profile to Factory Default
1. Press Start > More > More > Settings > Profiles.
2. Select the desired profile you want to revert and press Menu > Reset to
default.
3. Press Done (left softkey) complete the update.
Display
Configuring the Home Screen
The Home screen is displayed on your device while in standby mode. From here,
you can view important information for the day or messages at a glance. You can
also quickly switch to programs you’ve recently accessed.
The standby mode displays the Home screen from where you can:
• Access your Contacts List.
• Review upcoming appointments.
• Access unread SMS (text messages), email, and voicemail messages.
Settings 31
Download from Www.Somanuals.com. All Manuals Search And Download.
• Launch the most recently accessed programs or change the sound profile
option (top of screen).
• Access the Quick Launcher using the thumbwheel to provide access to
some common features such as the Task Manager, Alarms, Calendar, and
Edit menu.
The Home screen can be quickly accessed from any menu or screen by pressing
. See "Viewing the Display Screen" on page 9.
1. Update the Home screen settings by pressing Start > More > More >
Settings > Display > Home Screen. The following Home screen settings
are available:
• Home screen layout: Select the layout to be used for the Home
screen.
• Color scheme: Select the color scheme to be used for the Home
screen.
• Background image: Select an image to use as a background image
on the Home screen.
• Time out: Specify the length of time the device waits before returning
the display to the Home screen if the device is not used.
Setting the Home Screen Properties
Customize your Home screen’s display appearance by selecting a new appearance
and layout.
1. From standby mode, press Start > More > More > Settings > Display >
Home Screen > Home screen layout.
2. Use the navigation key to select an option.
3. Press Done (left softkey) to store the new selection and return to the
Home Screen.
Changing the Color Scheme
Customize your device’s display appearance by selecting a color scheme to reflect
your personality.
1. Press Start > More > More > Settings > Display > Home Screen >
Color scheme.
2. Use the navigation key to select an option.
3. Press Done (left softkey) to assign the color scheme and return to the
previous screen.
32 Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Display Screen Wallpaper
Choose what you see on the display screen while in standby mode. This selected
image is displayed as the Home screen background image. The image can be
chosen from either the default set or from a My Pictures folder.
1. Press Start > More > More > Settings > Display > Home Screen >
Background image.
Note: If you delete the default display image, the Home screen layout may not
work properly.
2. Use the navigation key to select an image. The list is sequential and
includes a listing of any stored images (both on the device and within
the optional memory card).
3. Press Done (left softkey) to assign the image and return to the previous
screen.
Setting the Time-out Properties
Choose the time delay before the Home screen turns off.
1. From standby mode, press Start > More > More > Settings > Display >
Home Screen > Time out.
2. Use the navigation key to select an option.
3. Press Done (left softkey) to assign the time-out value and return to the
previous screen.
Selecting the Start Menu Style
The Home screen provides access to the start menu using the Windows taskbar’s
Start button.
1. From standby mode, press Start > More > More > Settings > Display >
Start Menu Style.
2. Select Grid or List and press Done (left softkey).
Settings 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Management
You can conserve battery power by adjusting the timeout settings for the display
and the keypad and display backlight or adjusting the display brightness. This
section also provides you with an additional indication of your current main battery
charge level.
Reviewing the Battery Charge Level
• From standby mode, press Start > More > More > Settings > Power
Management.
Changing the Backlight Time-Out
Select the length of time the display backlight stays on when you do not use the
device.
1. From standby mode, press Start > More > More > Settings > Power
Management > Backlight time out.
• Choose Never, 5 seconds, 10 seconds, 15 seconds, 30 seconds, or
60 seconds.
2. Press the navigation key left or right to select a new time out setting and
press Done (left softkey).
Note: Long backlight time-out settings reduce the battery’s talk and standby times.
Changing the Display Time-Out
Select the length of time the display stays on.
1. From standby mode, press Start > More > More > Settings > Power
Management > Display time out.
• During standby, the device goes into sleep mode after a specified
period of time to conserve power. Choose Never, 10 seconds, 15
seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, or 10
minutes.
2. Press the navigation key left or right to select a new time-out setting and
press Done (left softkey).
Changing the Brightness
Adjust your screen’s brightness to suit your surroundings.
1. From standby mode, press Start > More > More > Settings > Power
Management > Display brightness.
• Adjust the brightness level for the display. Choose Level 1 - Level 5.
34 Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press the navigation key left or right to select a new level setting and
press Done (left softkey).
Changing the Keypad Backlight Time-Out
Select the length of time the keypad backlight stays on when you do not use the
keys.
1. From standby mode, press Start > More > More > Settings > Power
Management > Keypad backlight time out.
• Choose 1 second, 2 seconds, 3 seconds, 4 seconds, 5 seconds, or
10 seconds.
2. Press the navigation key left or right to select a new time-out setting
and press Done (left softkey).
Restricting the Keypad Backlight Time-Out
By default, the keypad backlight time-out is enabled all the time. With this setting
you can restrict the time of day that the keypad backlight time-out will be enabled.
For example, if you were planning a day at the beach (when you would not need the
keypad backlight), you could disable the backlight time-out for that period.
1. From standby mode, press Start > More > More > Settings > Power
Management > Keypad backlight on.
2. Choose Any time (default) or Custom time. If you wish to set a custom
time, enter new start and end times using the 24-hour time format
(0000 - 2400), and press Done (left softkey). The backlight will be
enabled only during the start and end time that you have set.
Location Settings
Your device is equipped with a Location feature for use in connection with location-
based services.
The Location feature allows the network to detect your position. Turning Location
off will hide your location from everyone except 911.
Note: Turning Location on will allow the network to detect your position using GPS
technology, making some applications and services easier to use. Turning Location
off will disable the GPS location function for all purposes except 911, but will not
hide your general location based on the cell site serving your call. No application or
service may use your location without your request or permission. GPS-enhanced
911 is not available in all areas.
Settings 35
Download from Www.Somanuals.com. All Manuals Search And Download.
To enable your device’s Location feature:
1. From standby mode, press Start > More > More > Settings > More... >
More... > Other Settings > Location. (The Location disclaimer will be
displayed.)
2. Read the disclaimer and press OK (left softkey).
3. Select Location on or Location off and press Done (left softkey).
When the Location feature is on, your device’s standby screen will display the
icon. When Location is set to Location off, the
icon will be displayed. In this
instance, the location feature is only enabled while in a 911 call so that emergency
personnel can locate you during an emergency.
Call Options
You can customize settings related to call functions. Although your current phone
number is displayed, it cannot be changed in this menu.
To access the Call Options menu:
1. From standby mode, press Start > More > More > Settings > Call
Options.
Call options allow you to change the following settings:
• Any key answer to set up how you answer incoming calls.
• Auto answer to answer incoming calls automatically with the optional
hands-free car kit or earphone.
• Voice mail number to set up the call-in number for your assigned voicemail
server.
Note: The voicemail number is automatically set when you receive your device. You
should not need to change it unless otherwise instructed by your service provider.
• International code to set up a standard international long distance prefix.
Setting Any Key Answer
Select how to answer incoming calls on your device: whether you want to be
required to press either
or any number key.
When this option is enabled, you can answer incoming calls by pressing any key,
except for the following:
.
36 Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
To enable Any key answer:
1. From standby mode, press Start > More > More > Settings > Call
Options.
2. Use the navigation key to highlight the “Any key answer” field and
press
to check the box.
Auto-Answer Mode
You may set your device to automatically pick up incoming calls when connected
to an optional hands-free car kit or headset.
To enable or disable auto-answer mode:
1. From standby mode, press Start > More > More > Settings > Call
Options > Auto answer.
• Choose Never (to disable Auto-Answer), 2 seconds, 4 seconds, 6
seconds, 8 seconds, or 10 seconds.
• Assigning a time causes all calls to be automatically answered when
the device is connected to a hands-free car kit or a headset (sold
separately).
2. Press the navigation key left or right to select a new time setting and
press Done (left softkey).
Reviewing Your Voice mail Number
During the initial system setup, the device automatically detects and sets your
voicemail number. If this field is blank, you can manually enter the number
obtained from your service provider.
Note: Although this field is editable, it is not recommended that this number be
altered.
Assigning an International Country Code
You can enter a frequently used country code that will be entered when plus code
dialing is used. The Plus Code Dialing Key ( ) automatically dials the
international access code for the country in which you are located.
This field allows you to prepend multiple dialing codes to a number. This can be
useful for long distance dialing where the international prefix, country code, and
city code are already stored on the device.
Settings 37
Download from Www.Somanuals.com. All Manuals Search And Download.
To enable the International Country Code:
1. From standby mode, press Start > More > More > Settings > Call
Options > International code.
2. Use the keypad to enter an international country code and press Done
(left softkey).
• When using Plus Code Dialing, the international code defaults to the
code for the country you are currently in, but when a value is entered
in this field, all international calls begin with this new value. This new
value supersedes the default International code.
• As an example, if this field contained: 01159399, then whenever you
pressed
, the “+” symbol would appear onscreen and then you
would simply key in the local phone number.
3. Press Done (left softkey).
Messaging Settings
Staying connected to your friends and family has never been easier. With your
device’s advanced messaging capabilities, you can send and receive many different
kinds of text messages without placing a voice call. (For more information, see
"Using SMS Text Messaging" on page 120.)
Messaging settings make text messaging easier by letting you decide how you
would like to be notified of new messages, create a signature with each sent
message, and create your own preset messages.
Accessing SMS Message Settings
1. From standby mode, press Start > Messaging.
2. Use your navigation key to select Text Messages and press Select (left
softkey) to launch the Text Messages menu.
3. Press Menu > Tools > Options.
Configuring Message Display Settings
1. From standby mode, press Start > Messaging > Text Messages.
2. Press Menu > Tools > Options > Display.
3. Use your navigation key to make the appropriate selections.
• Show date and time in the message list places additional date and
time information into the message display.
• Sort messages by provides different sorting criteria for those
messages currently in the message list:
38 Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
• Choose from either: Date received, Subject, Sender or Message
type.
• Choose from either: Descending or Ascending.
• After deleting or moving a message lets you set one of the
following options: Show next message, Show previous message, or
Return to message list.
4. Press Done (left softkey) to update these display settings.
Setting Message Sending Options
1. From standby mode, press Start > Messaging > Text Messages.
2. Press Menu > Tools > Options > Sending.
3. Use the navigation key to highlight a field:
• Include copy of original message when replying to e-mail.
• Save copies of sent items places a copy into the Sent folder.
4. Press Done (left softkey) to check the box.
Tip: To access the Messaging Settings menu, you can also press Start >
Messaging > Menu > Settings.
Adding a Customized Signature
Add a customized signature to each message you send.
1. From standby mode, press Start > Messaging > Text Messages.
2. Press Menu > Tools > Options > Signatures.
3. Select either Text Messages or Outlook E-mail to assign which
message category will use the configured signature.
4. Highlight the “Use signature with this account” field and press
to
check the box. (If you do not wish to attach a signature to your outgoing
messages, do not check the “Use signature with this account” field.)
5. Highlight the “Include when replying and forwarding” field and press
to check the box. (This adds the signature to your outgoing
messages.)
6. Enter a signature and press Done (left softkey). (See "Entering Text" on
page 25.)
Settings 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Preset Messages
Preset messages make sending text messages to your friends, family, and co-
workers easier than ever. My Text messages lets you quickly insert commonly used
phrases into the body of a new message or a reply to a message.
To add a preset message to a text message:
1. While the message is open, position the cursor to where you would like
the preset message to go.
2. Press Menu (right softkey) > My Text.
3. Highlight a message to insert, and press Insert (left softkey).
To edit a preset message:
1. Select an existing preset message and press Menu (right softkey) > Edit
My Text and use the keypad to edit or replace the message. and press
. (See "Entering Text" on page 25.)
To delete a preset message:
1. Select a preset message and press Menu > Edit My Text. (The entire
message is highlighted.)
2. Press and hold
to delete the message.
3. Press Done (left softkey) to complete the deletion, or press Cancel
(right softkey) to cancel the deletion.
Updating Account Settings
You can request that a notification message be sent back to your device when a
message has been successfully delivered and also that your callback number will
be attached to the message.
1. From standby mode, press Start > Messaging > Text Messages.
2. Press Menu > Tools > Options > Account Settings.
3. Use the navigation key to highlight a field and then press
to check
the box.
• Request delivery notifications launches an onscreen pop-up
message to notify you if the last outgoing message was successfully
delivered.
• Always send callback number provides additional information to the
outgoing message by attaching the number used in the Callback
number field.
40 Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select the Callback number field, and if desired, use the keypad to enter
a new callback number. Press and hold
numbers.
to delete the previous
5. Press Done (left softkey).
Deleting Messages
Delete individual messages you have read whenever you like, or delete all old
messages.
To delete messages:
1. From standby mode, press Start > Messaging > Text Messages.
2. Select a message from the list and press Delete (left softkey).
3. When prompted to confirm the deletion, press Yes (left softkey).
To empty previously deleted messages:
1. From standby mode, press Start > Messaging > Text Messages.
2. Press Menu > Tools > Empty Deleted Items.
3. When prompted to confirm the deletion, press Yes (left softkey).
TTY Use with Handset
A TTY (teletypewriter, also known as a TDD or Text Telephone) is a
telecommunications device that allows people who are deaf, hard of hearing, or
who have speech or language disabilities, to communicate by telephone.
Your device is compatible with select TTY devices. Please check with the
manufacturer of your TTY device to ensure that it supports digital wireless
transmission. Your device and TTY device will connect via a special cable that
plugs into your device's headset jack.
If this cable was not provided with your TTY device, contact your TTY device
manufacturer to purchase the connector cable.
Note: Not all service providers support TTY. Consult your service provider for more
information.
Settings 41
Download from Www.Somanuals.com. All Manuals Search And Download.
To turn TTY Mode on or off:
1. From standby mode, press Start > More > More > Settings > More... >
More... > Other Settings > TTY.
2. Read the onscreen alert message and press
3. Press the navigation key left or right to select a setting and press Done
).
.
(
• Choose from TTY OFF or TTY FULL.
Note: In TTY Mode, the device’s standby screen will display the TTY icon. If TTY
mode is enabled, the audio quality of non-TTY devices connected to the headset
jack may be impaired.
IMPORTANT 911 Emergency Calling: We recommend that TTY users make
emergency calls by other means, including Telecommunications Relay Services
(TRS), analog cellular, and land line communications. Wireless TTY calls to 911
may be corrupted when received by public safety answering points (PSAPs)
rendering some communications unintelligible. The problem encountered appears
related to TTY equipment or software used by PSAPs. The wireless industry and
PSAP community are currently working to resolve this.
Discreet Mode
You can set your device to discreet mode when you do not want others to hear your
normal ring tone or you want to be courteous (such as in a movie theater).
To set your device to discreet mode:
1. From standby mode, press Start > More > More > Settings > More... >
More... > Other Settings > Discreet mode.
2. Use your navigation key to select On or Off and press Done (left
softkey).
42 Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Customization
Customizing the Side Back-Clear Key Settings
You can change the program assigned to the side
Back-Clear key
when it is pressed and held.
1. From the Home screen, press Start >
More > More > Settings > More...>
More... > Key Settings > Side Key
Settings.
• Pressing and releasing either clears
an entry or takes you back to a
previously active menu.
• By default, pressing and holding
launches the camera mode.
2. Use your navigation key to assign a new application and press Done
(left softkey).
Customizing the Message Key
You can change the Message application assigned when you press and release or
press and hold the Messaging key ( ). By default:
• Pressing and releasing (“short press”) lets you access the Text Message
Inbox.
• Pressing and holding (“long press”) activates the Text Message Composer
(for new messages).
1. From the Home screen, press Start > More > More > Settings >
More... > More... > Key Settings > Message Key Settings.
2. Use your navigation key to assign either Text Messages Inbox or
Outlook Email Inbox in the ‘(Short press)’ field.
3. Use your navigation key to assign either Text Messages Composer or
Outlook Email Composer in the ‘(Long press)’ field.
4. Press Done (left softkey) to store these settings and return to the
previous menu.
Customizing the Function Key
While in the Home screen, pressing and holding the
key in conjunction with
other specified keys can launch predefined applications or activate specific
functions.
Settings 43
Download from Www.Somanuals.com. All Manuals Search And Download.
To show the list of customizable application hot keys:
1. From the Home screen, press Start > More > More > Settings >
More...> More... > Key Settings > Fn Key Settings.
2. Press Show List to both display a list of four predefined application
buttons and their currently associated application.
• The W key is by default associated with the World Clock application.
• The B key by default, will launch the Bluetooth Settings menu.
• The I key is by default associated with International Usage.
• The F key by default, will launch the Fn Key Settings menu.
To use the Fn key:
1. From the Home screen, press and hold
for a few seconds to activate
the onscreen Launch Application window. This pop-up indicates the
current application assignments of the four available hot keys.
• As an example, to quickly change the device’s service mode from
CDMA to GSM, press and hold
setting).
, and then press
(in the default
To change the hot keys:
1. From the Home screen, press Start > More > More > Settings >
More... > More... > Key Settings > Fn Key Settings > Show List.
2. Select one of the four buttons from the list and press
3. From the Select an Item screen, use your navigation key to choose an
item and press . (This list is extensive and you should note that
.
there are many available options.)
4. Press Done (left softkey) when you have finished assigning hot keys.
Using Speed Dial
Assigning an Application to a Speed Dial Location
Start menu applications can be set to launch when activated by a speed dial
keypress in the same way that phone numbers can be assigned to a speed dial key.
Tip: You can also assign email addresses or Web pages to the number keys as
speed dial entries.
44 Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
1. From the Home screen, press Start.
2. Select a desired application from the Start menu screen (or from
available submenus), but don’t press
.
3. Press Menu (right softkey) > Add Speed Dial.
4. Use the keypad to assign a descriptive name within the Name field (or
accept the default).
5. In the Keypad assignment field, select an available speed dial location
for the application.
Note: Keypad numbers 0, 1, and all digits ending in 0 (10, 20, 30, etc.) are
reserved and cannot be overwritten. Speed dial 1 is reserved for quick access to
Voicemail services.
6. Press Done (left softkey) to finish assigning the speed dial.
To view the list of current Speed Dial assignments:
1. Press Start > More > Accessories > Speed Dial.
• This list displays both phone numbers and applications that have
been assigned a speed dial location (from 2 -99).
To delete a current Speed Dial assignment:
1. Press Start > More > Accessories > Speed Dial.
2. Select a speed dial entry and press Menu (right softkey) > Delete.
3. Confirm the deletion by pressing Yes (left softkey) or cancel by pressing
No (right softkey).
Configuring the Time and Date
The Date and Time settings enable you to either manually set the date, time, and
time zone or to allow the device to automatically update the information over the
network.
1. From the Home screen, press Start > More > More > Settings >
More... > Date and Time.
2. Select your time zone and set the current date and time.
Settings 45
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Set the Time settings and Time zone settings fields to either Manual or
Auto.
• Manual requires the information to be updated by the user.
• Auto obtains the time and date information from the network.
4. Press Done (left softkey) to complete the setup process.
Configuring the Regional Settings
This menu allows you to change the way some data is formatted and displayed on
the device such as language, locale, date styles, and currency and time formats
appropriate to your current location.
1. From the Home screen, press Start > More > More > Settings >
More... > More... > Regional Settings.
2. Select the fields for any categories you wish to change and then press
the navigation key left or right to change settings.
3. Press Done (left softkey) to complete the setup process.
Note: If you changed a language or locale setting, after pressing Done you will need
to turn the device off and then back on again for your changes to take effect.
To change from English to French:
1. From the Home screen, press Start > More > More > Settings >
More... > More... > Regional Settings.
2. In the ‘Language’ field, select Français and press Done (left softkey).
3. Press OK (left softkey) to acknowledge the change in the language.
4. Press and hold
for two seconds until you see the powering down
animation on the display screen.
• When the device restarts, French menus will be displayed.
To change from French to English:
1. Repeat steps 1 – 4, this time selecting US English in the ‘Language’
field.
46 Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Security
This section will familiarize you with your device’s security settings. With several
options available, you can customize your device to meet your personal needs.
Accessing the Security Menu
All of your device’s security settings are available through the Security menu.
1. Press Start > More > More > Settings > More... > Security.
Using Your Device’s Lock Feature
Locking Your Device with a Password
When your device is locked, you can only receive incoming calls or make calls to
911 or special numbers. (See "Using Special #s" on page 49.)
When you lock your device, it requires a password to return to normal operation.
When a password is set up, the device can be locked immediately or configured to
lock when the screen goes blank.
1. Press Start > More > More > Settings > More... > Security.
2. Select Device Lock and press
.
3. Select “Prompt if device unused for” and press
. (Enabling this
option activates the remaining fields.)
4. Select each field and enter the required information:
• Time: select the amount of unused time (idle) required before you are
prompted for a password.
• Password type: to choose from one of the following PIN types:
• Simple PIN: must be at least four characters in length and
cannot contain a simple sequence such as 0000, 1111, or
1234.
• Strong alphanumeric: must be at least seven characters in
length and must contain at least one character from each of
the following categories: uppercase/lowercase letters,
numerals, symbols. Examples of strong alphanumeric
passwords are sb?8A!3 and %$VH5hW.
• Password: use the keypad to enter the desired password.
• Confirm password: use the keypad to re-enter the same password.
5. Press Done (left softkey) > Yes (left softkey) to store these settings.
Device Security 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Unlocking Your Device Using a Password
Once the preset time has expired, the display screen will dim and the taskbar Start
option is replaced with Unlock.
1. From standby mode, press Unlock.
2. Enter your password using the keypad.
3. Press Unlock.
Changing the Device Lock Code
1. Press Start > More > More > Settings > More... > Security.
2. Select Device Lock and press
.
3. Enter your password using the keypad.
4. Press Unlock.
5. Navigate to the Password field and then to the Confirm password field,
pressing and holding
information.
in each field to delete the current password
6. Enter your new password within both fields and when prompted, re-
enter your new lock code.
7. Press Done (left softkey) to store the new password.
Removing the Device Lock
1. Press Start > More > More > Settings > More... > Security.
2. Select Device Lock and press
.
Tip: If you can’t recall your lock code, try using the last four digits of either your
Social Insurance Number or Mobile Directory Number or try 0000. If none of these
work, call Customer Service at 1-800-Samsung.
3. Enter your password using the keypad.
4. Press Unlock.
5. Select “Prompt if device unused for” and press
. (This action
removes the check mark from this option and disables the device lock
feature.)
6. Press Done (left softkey) > Yes (left softkey) to store the new settings.
48 Device Security
Download from Www.Somanuals.com. All Manuals Search And Download.
Manually Locking Your Device
This manual process temporarily locks the device
without the need to enter a password.
You can still receive calls, but you cannot make
calls or use the keypad.
1. Press
to activate the Quick List
menu. (This menu allows you to quickly
turn the device off, access the Wireless
Manager, lock the device, or activate
sound profiles.)
2. Select Lock and press
. (The display
screen dims and the Unlock option now
appears in the taskbar.)
– or –
Press and hold
.
Ma•nuParlleyssUnUlnolcokcikng(letfhtesoDfetkveicye) and then immediately press
. (This removes
the manual lock and allows you to fully utilize the device and all its
features.)
Calling in Lock Mode
You can place calls to 911 and to your special numbers when in lock mode.
• To call an emergency number or special number, enter the phone number
and press
.
Using Special #s
Special numbers are important numbers that you have designated as being “always
available.” You can call and receive calls from special numbers even if your device
is locked.
You can save up to three special numbers in addition to your Contacts entries (the
same number may be in both directories).
To add or replace a special number:
1. Press Start > More > More > Settings > More... > Security.
2. Select Emergency Numbers and press
.
3. Select a location for your entry.
4. Enter the number and press Done (left softkey).
Device Security 49
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Read the Alert pop up and press Yes (left softkey) to activate a soft reset
of your device or No (right softkey) to cancel the operation.
Note: There are no speed dial options associated with special numbers.
Using Encryption
The encryption feature is used with files stored on the optional microSD™ card to
make them readable only on your device.
To encrypt files stored on a microSD card:
1. Press Start > More > More > Settings > More... > Security.
2. Select Encryption and press
3. Press to enable the encryption option and then press Done (left
softkey).
.
Managing Certificates
You can add and delete public key certificates. Three types of certificates can be
created.
To access information about different certificate types:
1. Press Start > More > More > Settings > More... > Security.
2. Select Certificates and press
. From this screen, you can manage
the following certificate types:
• Personal: Used to identify yourself to others.
• Intermediate: Used to identify intermediate certification authorities.
(Intermediate certificates are issued by the trusted root certificate
authority, and any SSL [secure sockets layer] certificates then issued
by the intermediate certificate will inherit the trust of the trusted root.
• Root: Used to identify root certification authorities. (A root certificate
is the top-most certificate of the certificate tree. All certificates below
the root certificate inherit the trustworthiness of the root certificate.)
3. Select the encryption option and press
to see the certificate
information.
50 Device Security
Download from Www.Somanuals.com. All Manuals Search And Download.
To delete a certificate:
1. Press Start > More > More > Settings > More... > Security.
2. Select Certificates and press
.
3. Select any of the three available certificates and press
to reveal a
list of related certificates.
4. Select an entry from the list and press Menu > Delete.
• After selecting Delete, the certificate is disabled by default.
5. Read the disclaimer and press OK (left softkey).
Resetting Your Device
Resetting the device restores all the factory defaults, including the ringer types
and display settings. The Contacts list, call history, scheduler, and messaging are
also affected.
1. Press Start > More > More > Settings > More... > Security.
2. Select Phone Reset and press
.
3. Enter the lock code and press Done (left softkey).
4. Read the disclaimer and press OK (left softkey).
• The device will restart and all current data stored on the device will be
deleted. This reset process does not affect the data stored on the
microSD card.
• After the device restarts, you may have to press Next (right softkey)
and reconfigure basic settings such as the time and date (page 45)
and the password (page 47).
Device Security 51
Download from Www.Somanuals.com. All Manuals Search And Download.
Roaming
This section explains how roaming works as well as special features that let you
manage your roaming experience
Recognizing Icons on the Display Screen
Your device’s Home screen always lets you know when you’re off the network.
Anytime you are roaming, the device displays the roaming icon ( ) and extra
R
charges may apply when making or receiving a call.
Tip: Remember, when you are using your device off the network, always dial
numbers using 11 digits (1 + area code + number).
Note: You may pay a higher per-minute rate for roaming calls.
Roaming on Other Digital Networks
When you’re roaming, you may not be able to access certain features, such as web
services.
Note: If you’re on a call when you leave the network and enter an area where roaming
is available, your call is dropped. If your call is dropped in an area where you think
service is available, turn your phone Off and On again to reconnect to the network.
Checking for Voicemail Messages While Roaming
When you are roaming off the network, you may not receive automatic on-device
notification of new voicemail messages. Callers can still leave messages, but you
will need to periodically check your voicemail for new messages if you are in a
roaming service area for an extended period of time.
1. Dial 1 + area code + your phone number.
2. When you hear your voicemail greeting, press
.
3. Enter your passcode at the prompt and follow the voice prompts.
When you return to the network, voicemail notification will resume as normal.
52 Roaming
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Your Device’s Roam Mode
Your device allows you to control your roaming capabilities. Your device has a way
of alerting you when you are roaming off the network: the onscreen roaming icon.
By using the Roaming menu option, you can determine which signals your device
accepts, and which network you will use.
Enabling the Roaming Option
Choose from three different settings on your device to control your roaming
experience.
1. Press Start > More > More > Settings > More... > Roaming.
2. Use the navigation key to select an option in the ‘Roaming option’ field
and press Done (left softkey).
• Automatic to seek service. When service is unavailable, the phone
searches for an alternate system.
• Home Only to access the home network only and prevent roaming
on other networks.
• 1X Only to access 1X networks. No EVDO service is available.
International Data Roaming
You can keep connected via email and Web browsing when traveling in countries in
which data service is offered. Data services are available on both CDMA and GSM
networks; check with your service provider to determine the services available
where you are traveling.
Note: Prior to using your GSM Data Services, you must establish and utilize your
CDMA data services domestically on the network.
Roaming 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Call History
This section guides you through accessing and making the most of your Call
History.
Viewing History
Call History is a list of recent phone numbers (or Contacts entries) for calls you
placed, accepted, or missed. Call History makes redialing a number fast and easy.
It is continually updated as new numbers are added to the beginning of the list and
the oldest entries are removed from the bottom of the list. When you view the
numbers in this list, an icon to the left of the number indicates the call type:
Dialed: Indicates all outgoing calls made from your device.
Missed: Indicates any missed calls. These are routed to your voicemail.
Received: Indicates any received calls that were answered.
Each entry contains the phone number (if it is available) and the Contacts entry
name (if the phone number is in your Contacts).
Accessing Call History
1. Press Start > Call History.
2. Use either the navigation key or thumbwheel to scroll through the
available list.
Tip: The previous two steps can be shortened by pressing
from the Home
screen to display a list of recent calls.
3. Highlight the number and press
.
Note: Call History records only those calls that occur while the device is turned on.
If a call is received while your device is turned off, it will not be included in the
device’s Incoming or Missed call logs. If you return a call from the voicemail menu,
it will not be included in your device’s Outgoing call log.
54 Call History
Download from Www.Somanuals.com. All Manuals Search And Download.
Call History Options
Select a Call History entry and press
to display the date and time of the call,
the phone number (if available), and the caller’s name (if the number is already in
your Contacts).
1. Access the Call History list.
2. Press Menu (right softkey) to display the following options:
• Find Contact to find a contact entry matching the selected phone
number.
• Send Text Message to activate the Text Message Composer (for a
new message).
• E-mail to activate the Microsoft Outlook® Composer (for a new
email message).
• View Timers to display the recorded time for the following
categories.
• Last call: call length for last outgoing call.
• All calls: length of all incoming and outgoing calls since the
last reset of the timers (page 56).
• Incoming calls: total time used for all incoming calls.
• Outgoing calls: total time used for all outgoing calls.
• Roaming calls: total time used for all roaming calls.
• Data calls: total time used for all data transmissions (calls).
• Last reset: shows most recent reset time.
• Lifetime calls: total combined time used for all of the above
call types.
• Delete to delete the currently selected entry.
• Delete List to delete all Call History entries.
• Save to Contacts to save the number into your Contacts list if it is
not already stored. (See "Saving a Phone Number From Call History"
on page 56.)
• Filter to restrict the list of entries that appear.
Tip: You can also view the next Call History entry by pressing the navigation key
down or view the previous entry by pressing the navigation key up.
Call History 55
Download from Www.Somanuals.com. All Manuals Search And Download.
Filtering Calls in Call History
1. Press Start > Call History > Menu (right softkey) > Filter. (This option
filters the list to display only those calls meeting your selected criteria.)
2. Select an option and press
.
• No Filter: all calls are displayed.
• Missed Calls: only calls which were not answered are displayed.
• Incoming Calls: only calls that were answered are displayed.
• Outgoing Calls: only calls that were placed are displayed.
Resetting Timers from the Call History
1. Press Start > Call History > Menu (right softkey) > View Timers.
2. Press Menu > Reset Timers.
3. Read the disclaimer and press Yes (left softkey).
Making a Call From the Call History
1. Press Start > Call History.
2. Select an entry (number or Contacts name) and press
.
Note: You cannot make calls from Call History to entries identified as No ID or
Restricted.
Saving a Phone Number From Call History
The number of Contacts that can be stored on the device is determined by the
storage capacity. Each Contacts entry can store up to a total of 10 phone numbers,
and each entry’s name can contain 255 characters.
1. Select a Call History entry and press Save (left softkey).
2. Select <New Contact> and press
.
3. Use the keypad to type in the new entry's first and last name. The
device’s word prediction feature may try to identify the word being
typed.
56 Call History
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select a Number type from one of the following categories (groups):
• Mobile
• Work
• Company
• Pager
• Home
• Work 2
• Home 2
• Car
• Assistant
• Radio
After you have saved the number, the new Contacts entry is displayed in the
alphabetical listing. (See "Contacts Entry Options" on page 61.)
Note: You cannot save phone numbers already in your Contacts or from calls
identified as Unknown ID or Restricted.
Deleting Call History Entries
You can delete individual entries from Call History, or you can delete all entries.
To Delete individual entries in Call History:
1. Press Start > Call History.
2. Select an entry and press Menu (right softkey) > Delete.
3. Read the disclaimer and if you are certain you want to permanently
delete the entry, press Yes (left softkey).
– or –
Press No (right softkey) to return to the previous menu.
To Delete all entries in Call History:
1. Press Start > Call History.
2. Press Menu (right softkey) > Delete List.
3. Read the disclaimer and if you are certain you want to permanently
delete the list of entries, press Yes (left softkey).
– or –
Press No (right softkey) to return to the previous menu.
Call History 57
Download from Www.Somanuals.com. All Manuals Search And Download.
Contacts
This section explains how to use your device’s Contacts list.
Adding a New Contacts Entry
The number of Contacts entries that can be stored on the device is determined by
the storage capacity of the device. Each Contacts entry can store up to a total of 10
phone numbers, and each entry’s name can contain 255 characters.
1. Press Start > Contacts > New.
2. Enter a name for the new entry. (See "Entering Text" on page 25.)
3. Enter the phone number(s) for the entry.
4. Press Done (left softkey) to store the new entry into the Contacts list.
After you have saved the number, the new Contacts entry is displayed. (See
"Contacts Entry Options" on page 61.)
Assigning Speed Dial Numbers
Your device can store up to 99 phone numbers in speed dial locations. (For details
on how to make calls using speed dial numbers, see "Using Speed Dialing" on page
24.) You can assign speed dial numbers when you add a new Contacts entry, when
you add a new phone number to an existing entry, or when you edit an existing
number.
Note: Numbers 0, 1, and all digits ending in 0 (10, 20, 30, etc.) are reserved and
cannot be overwritten. Speed dial 1 is reserved for quick access to Voicemail.
To assign a speed dial number to a new phone number:
1. Add a phone number to a new or to an existing Contacts entry. (See
"Adding a New Contacts Entry" on page 58 or "Adding a Phone Number
to a Contacts Entry" on page 62.)
2. Select the new entry from the Contacts list and press
. (This opens a
details screen for the selected entry.)
3. Press Menu (right softkey) > Add to Speed Dial and press
.
4. Edit the name using the keypad (if desired).
5. Select an available speed dial location (2 - 99) and press Done (left
softkey) to complete the speed dial assignment. (A confirmation will be
displayed.)
58 Contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
To assign a speed dial number to an existing phone number:
1. From the Home screen, press Contacts (right softkey).
2. Select an entry and press
.
3. Select a number to assign to a speed dial location.
4. Press Menu (right softkey) > Add to Speed Dial and press
.
5. Select an available speed dial location (2 - 99) and press Done (left
softkey) to return to the details page. (A confirmation will be displayed.)
6. Press Done (left softkey) to return to the Contacts menu.
Note: If you attempt to assign an already in-use speed dial location to a new
phone number, a message will appear asking if you wish to replace the existing
speed dial assignment. Press Yes (left softkey) to assign the location to the new
phone number and delete the previous speed dial assignment.
To review a list of previously assigned speed dial numbers:
1. Press Start > More > Accessories > Speed Dial.
Finding Contacts Entries
There are several ways to display your Contacts entries: by name, by speed dial
number, by group, and by voice dial tags. Follow the steps outlined in the sections
below to display entries from the Contacts menu.
Finding Contacts by Name
1. Press Start > Contacts.
– or –
From the Home screen, press Contacts (right softkey).
2. Scroll through all the entries.
– or –
Enter the first letter of a name. (The more letters you enter, the more
your search narrows.)
3. To display the details for an entry, select it and press
.
Contacts 59
Download from Www.Somanuals.com. All Manuals Search And Download.
4. To dial the entry’s default phone number, press
.
– or –
To display additional Contacts entries, press the navigation key up or
down.
Finding Speed Dial Numbers
1. Press Start > More > Accessories > Speed Dial.
2. Scroll through speed dial entries. Speed dial numbers are displayed in
numeric order.
– or –
Enter the number of a speed dial location using your numeric keypad.
3. To display the details of an entry, highlight it and press
4. To dial the entry’s default phone number, highlight the entry from the
list and press
.
.
Finding Entries by Category
To make the search process easier and quicker, Contacts entries can be assigned
to any or all of these categories: Business, Holiday, Personal, and Seasonal.
1. Press Start > Contacts > Menu > Filter.
2. Select one of the available category types from the pop-up menu and
press
to filter the current list of Contacts. (If your category does not
appear in the list, select More... to display additional entries.)
• All Contacts does not filter the Contacts list.
• Recent displays only the most recently added contacts.
• No Categories displays only entries that are not assigned to a
category.
• Business displays only entries that are assigned to the Business
category.
• Holiday displays only entries that are assigned to the Holiday
category.
• Personal displays only entries that are assigned to the Personal
category.
• Seasonal displays only entries that are assigned to the Seasonal
category.
60 Contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
• More.. allows you to select multiple category types and display only
those entries that match.
3. To display an entry within the category, select it and press
.
4. To dial the entry’s default phone number, press
– or –
.
To dial another listed number:
• Select the entry and press
.
• Select the phone number and press Call (left softkey).
Contacts Entry Options
To access a Contacts entry’s options, display the entry and press Menu. Select an
option and press
.
• Edit to add to or change a Contacts entry. (See "Adding a New Contacts
Entry" on page 58 or "Adding a Phone Number to a Contacts Entry" on page
62.)
• Send Contact [Beam] to send and receive information wirelessly between
your device and one or more other Bluetooth-enabled devices.
• Copy Contact to create a duplicate of a Contacts entry.
• Delete Contact to permanently delete an entry.
• Copy All to transfer a copy of all current contacts to either the phone or to
the SIM card, depending on the original storage location of the selected
entry.
• View By to filter how entries are displayed (either by Name [alphabetical] or
by Company [user-defined]).
• Delete All to permanently delete all Contacts entries from either the phone
or the SIM card.
• Filter to display only entries matching a selected filter category. See
"Finding Entries by Category" on page 60.
Tip: You can view the next entry by pressing the navigation key right or view the
previous entry by pressing the navigation key left.
Contacts 61
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding a Phone Number to a Contacts Entry
1. Display a Contacts entry. (See "Finding Contacts Entries" on page 59.)
2. Press Menu > Edit.
3. Select a phone number field, use the keypad to enter the new number,
and press Done (left softkey).
Editing a Contacts Entry’s Phone Number
1. Display a Contacts entry. (See "Finding Contacts Entries" on page 59.)
2. Press Menu > Edit.
3. Select a number to change, and use
to clear one digit at a time, or
press and hold to erase the entire number.
4. Re-enter or edit the number and press Done (left softkey).
Editing a Contacts Entry
1. Display a Contacts entry.
2. Press Menu > Edit.
3. Select the information you wish to edit (Name, Group, Ringer, etc.), and
use
to clear one character at a time, or press and hold
to
erase the entire entry.
4. Add or edit the information using the keypad and press Done (left
softkey) to save the changes.
Deleting Contacts
You can quickly delete either individual entries or all entries from your Contacts
list. Contacts can be deleted from either the device or from the SIM card.
To delete a single contact:
1. Press Start > Contacts.
2. Select a contact from the list and press Menu > Delete Contact.
3. Read the disclaimer and press Yes (left softkey).
To delete all contacts:
1. Press Start > Contacts > Menu > Delete All.
2. Select either Phone or SIM and press
.
3. Read the disclaimer and press Yes (left softkey).
62 Contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
Beaming a Contacts Entry
You can send and receive information wirelessly between your phone and up to
two Bluetooth-enabled devices. The following example shows how to transmit
Contacts entry information to another phone.
1. Display a Contacts entry.
2. Press Menu > Send Contact > Beam. (The device will search for other
Bluetooth-enabled devices in range.)
3. Select a Bluetooth device from the list and press Beam. (The recipient
will then be given the option to agree to save the contact to their own
device.)
To Receive a Beamed Contact:
When receiving a Contacts entry from another device, you will be prompted to
accept the beamed information.
1. Read the confirmation screen and press Done (left softkey).
Selecting a Ringer Type for an Entry
Assign a ringer type to a Contacts entry so you can identify the caller by the ringer
type. (See "Ringer Type" on page 29.)
1. Display a Contacts entry.
2. Press Menu > Edit.
3. Scroll through available ringers in the Custom ring tone field. (When
you highlight a ringer type, a sample ringer will sound.)
4. Select a ringer and press Done (left softkey) to save the new ringer type.
Contacts 63
Download from Www.Somanuals.com. All Manuals Search And Download.
Tools
This section shows you how to use these features to turn your device into a time
management planner that helps you keep up with your contacts, schedules, and
commitments.
Using Your Device’s Calendar
Adding an Event to the Calendar
Your Calendar helps organize your time and reminds you of important events.
1. Press Start > Organizer > Calendar.
2. Press the left softkey to cycle between Week, Month, and Agenda (full-
screen table calendar view).
Tip: Press the navigation key up or down to scroll through the Calendar.
3. Select the day to which you would like to add an event and press Menu
(right softkey) > New Appointment.
4. Enter a title for the event in the Subject field using the keypad. (See
"Entering Text" on page 25.)
5. Select a time and date for the event by selecting the corresponding
fields, pressing
to delete any previous information, and using the
keypad to enter new values.
• To toggle between AM and PM, highlight it and press either A (for
AM) or P (PM) on the keypad.
6. Press
to set as an All day event.
7. Use the keypad to enter a location for the event.
8. Select the number of Attendees for the event (default is No
attendees...).
• Select to add either a Required Attendee or an Optional Attendee
and press
.
• Press Menu > New Contact. (See "Adding a New Contacts Entry" on
page 58.)
9. Select an alarm time for the event by highlighting the Reminder field.
• Select None, 1 minute, 5 minutes, 10 minutes, 15 minutes, 30
minutes, 1 hour, 1 day, or 1 week.
64 Tools
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Select a recurrence status for the event by highlighting the Occurs field.
• Select Once, Every [Day], Day [Number] of every month, or Every
[Month Number].
11. Select a status category for the event by highlighting the Status field.
• Select Busy, Out of Office, Free, or Tentative.
12. Select a sensitivity for the event by highlighting the Sensitivity field.
• Select Normal, Personal, Private, or Confidential.
13. From within the Notes field, press the navigation key right to access the
Note dialog and enter an optional note.
14. Press Done (left softkey) to save the event and return to the calendar
page.
Event Alert Menu
When your device is turned on and you have an event alarm scheduled, your
device alerts you and displays the event summary. There are several ways your
device alerts you to scheduled events:
• By playing the assigned ringer type
• By illuminating the backlight
To adjust the reminder type in the calendar and task:
1. Press Start > More > More > Settings > Profile.
2. Select files that you want and press Menu > Edit.
To view additional options, press the appropriate softkey:
• Dismiss acts to dismiss the event.
• Menu silences the alarm and schedules it to replay again at a select interval:
• Remind 5 mins before
• Snooze 5 minutes
• Snooze 10 minutes
• Snooze 15 minutes
• Snooze 1 hour
• Snooze 1 day
• Dismiss All
• View Item
Tools 65
Download from Www.Somanuals.com. All Manuals Search And Download.
Reviewing Calendar Events
You can quickly access any calendar entries by either selecting an upcoming event
from the Home screen or by using the thumbwheel to open the Calendar via the
Quick Launcher.
To go to the Calendar menu for today’s date:
1. From the Home screen, use the thumbwheel or navigation key to scroll
down to the Calendar Events section and press
.
• Calendar Events: displays the next upcoming event and allows quick
access to the Calendar screen.
– or –
1. Press Start > Organizer > Calendar > Menu > Go to Today.
2. Select the event you would like to view and press
. (If you have
multiple events scheduled for the selected day, they will be listed in
chronological order.)
To review all Calendar events:
1. Press and hold the thumbwheel for at least three seconds to activate the
Quick Launcher (displayed on the right side of the current screen.)
2. Scroll to the Calendar icon and press
to launch the event viewer.
3. Press Menu > Month View.
Tip: In the Agenda view, days with events scheduled are shown with a triangular
icon at the corner.
Deleting an Event
1. Press Start > Organizer > Calendar.
2. Select the event you would like to erase and press Menu (right softkey)
> Delete Appointment.
• When deleting an event, you will be able to delete events for the
selected day or week only.
66 Tools
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: If the day for which you are deleting events contains a recurring event, you
will see this prompt: “Do you want to delete all occurrences of the recurring
appointment or only this one?” Select All (left softkey) to delete all occurrences of
the event or One (right softkey) to delete the event for the selected day only.
Using Your Device’s Alarm Clock
Your device comes with a built-in alarm clock that has multiple alarm capabilities.
To Set a wake-up alarm:
1. Press Start > Organizer > Alarms > Wake-up alarm.
2. Check the box to the left of the Time field by pressing
. This will
allow you to use the navigation key to scroll right to the Time field.
3. Highlight the Time field (7:00 by default) and then use the keypad to
enter a new time for the wake-up alarm.
4. Use
alarm.
to uncheck any days for which you do not want to hear the
• Press Menu (right softkey) to choose from a list of day options.
• Choose from Select every day, Select Mon-Fri, Select Mon-Sat,
Select Sat-Sun, Select Sun-Thu, or Deselect All.
• Make your selection and press
.
5. Select a ringer tone for the alarm by selecting the Tone field and
pressing the navigation key left or right to scroll through the tones. If
you pause on a tone, a sample will play.
6. Select a snooze setting by selecting the Snooze field and using the
navigation key to select Off, 1 min, 3 min, 5 min, 7 min, or 10 min.
7. When you have finished setting the alarm, press Done (left softkey).
To Set a custom alarm:
1. Press Start > Organizer > Alarms.
2. Select Alarm 1 - Alarm 9.
3. Use the keypad to enter an optional label for the alarm in the Name field.
4. Turn the alarm on or off by selecting the Alarm activation field and using
the navigation key to adjust the selection.
• Select On or Off.
Tools 67
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Select a time for the alarm by selecting the Alarm time field and using
the navigation key to adjust the selection.
• Using your keypad or navigation key, set the alarm time notification
setting and time.
• Select Manual setting in the Alarm time window to set an exact time
for the alarm, or scroll to set the alarm to go off from 10 minutes to 2
hours from the current time.)
6. Select a ringer tone for the alarm by selecting the Tone field and
selecting from an available alert tone.
• To select a ringer menu, press the navigation key right or left to make
your selection, after which a sample of the tone will sound.
7. Select a repeating status for the alarm by selecting the Repeat field and
using the navigation key to adjust the selection.
• Highlight Every day, Except Sunday, None, or Except Saturday and
Sunday.
8. Select a snooze status for the alarm by selecting the Snooze field and
using the navigation key to adjust the selection.
• Highlight Off, 1 min, 3 min, 5 min, 7 min, or 10 min.
9. When you have finished setting the alarm, press Done (left softkey).
Using Your Device’s Notepad
Your device comes with a notepad that you can use to compose and store
reminders and notes to help keep you organized.
To compose a note:
1. Press Start > Organizer > Notepad > New (left softkey).
• When there is more than one note already stored, press Menu (right
softkey) > New note to create a new note.
2. Type your note using the keypad and press Done (left softkey). (See
"Entering Text" on page 25.)
To read a saved note:
1. Press Start > Organizer > Notepad.
2. Select a note and press
.
68 Tools
Download from Www.Somanuals.com. All Manuals Search And Download.
To delete saved notes:
1. Press Start > Organizer > Notepad.
2. Select a note and press Menu (right softkey)> Delete (or Delete all, to
delete all saved notes).
To display sorted notes:
1. Press Start > Organizer > Notepad > Menu (right softkey) > Sort.
2. Select a sort order (ascending order or descending order) and press
.
3. Select a sort key and press
.
• By name sorts the notes based on the first few characters.
• By date sorts the notes based on the creation date.
• By size sorts the notes based on file size.
To send a note via text messaging (SMS):
1. Press Start > Organizer > Notepad.
2. Select a note and press Menu (right softkey) > Send via Email/
Message.
3. Select Text Messages and press
.
4. Use the keypad to enter the recipient’s phone number and press Send
(left softkey). (For more information, see "Using SMS Text Messaging"
on page 120.)
To send a note via email:
1. Press Start > Organizer > Notepad.
2. Select a note and press Menu (right softkey) > Send via Email/
Message.
• A working email account must be set up on the device before you can
send an email message. (For more information, please see "Setting
Up an IMAP or POP Account" on page 123.)
3. Select Outlook E-mail and press Select (left softkey).
4. Use the keypad to enter the recipient’s contact information and subject,
and then press Send. (For more information, please see "Composing
Email Messages" on page 126.)
Tools 69
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Tasks
Your device can keep track of your to-do list items (tasks).
To create a new task:
1. Press Start > Organizer > Tasks > Menu (right softkey) > New Task.
2. Enter the task using the keypad and press
.
3. With the task still selected, press
again, and then press Edit (left
softkey).
4. Select the Priority field and press the navigation key to assign a priority
to the task (Normal, Low, or High).
5. Assign a Start date and Due date for the task by selecting the
appropriate field and using the keypad to enter the new dates.
6. Use the navigation key in the Occurs field to designate how often the
task comes up.
• Highlight Once, Every [Weekday], Day [Number] of every month] or
Every [Month Day].
7. You can set a reminder to let you know of an upcoming task:
• Select the Reminder field and press
.
• Enter a date the reminder should appear.
8. Select an optional category for the task: Business, Holiday, Personal,
or Seasonal. (See "Sorting and Filtering Tasks" on page 71.)
9. Select an optional sensitivity level for the task: Normal, Personal,
Private, or Confidential.
10. Select the Notes field and press
to attach an optional personalized
note to this task. When you have completed the note text, press Done
(left softkey).
11. Press Done (left softkey) to complete the setup and addition of the new
task to your task list.
All new tasks are saved to the task list. You can organize your tasks based on
priority level, subject, start date, due date, status, or other related criteria.
Marking a Task as Complete
You can place a check mark beside a task to show that it has been completed.
1. Press Start > Organizer > Tasks.
2. Select the task from the list and press Complete (left softkey).
70 Tools
Download from Www.Somanuals.com. All Manuals Search And Download.
Task Options
To display a task's options, select a task and press Menu (right softkey). Select an
option and press
.
• New Task to create a new task. (See "To create a new task:" on page 70.)
• Beam Task to send and receive task information between your device and
other Bluetooth-enabled devices.
• Delete Task to permanently delete the selected task.
• Sort By to organize how tasks are sorted within the list, using sort keys
such as Status, Priority, Subject, Start Date, Due Date.
• Filter to display only those entries which match a selected sort key. (See
"Filtering the Task List" on page 71.)
• Options to select other task settings.
• Set reminders for new items automatically creates an alert when a
new task is created.
• Show start and due dates causes the start and due date for each
task to be displayed in the task list.
Sorting and Filtering Tasks
Sorting the Task List
1. Press Start > Organizer > Tasks > Menu (right softkey) > Sort By.
2. Select one of the available sort keys from the pop-up menu and press
to organize the current list.
• Status sorts tasks based on their status.
• Priority sorts tasks based on their priority.
• Subject sorts tasks alphabetically based on their subject title.
• Start Date sorts tasks based on their beginning date.
• Due Date sorts tasks based on their due date.
Filtering the Task List
1. Press Start > Organizer > Tasks > Menu (right softkey) > Filter.
2. Press
or press the navigation key right to open a pop-up menu.
Note: Each task can be assigned to as many as four categories.
Tools 71
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select a category type and press
to filter the current list. (If your
category does not appear in the list, select More... to display additional
entries.)
• All Tasks displays the complete task list.
• Recent displays only the most recently added tasks.
• No Categories displays only those tasks that currently have no
category assignment.
• Active Tasks displays only those tasks that are currently active (not
checked off as completed).
• Completed Tasks displays only those tasks that have been checked
off as completed. (See "Marking a Task as Complete" on page 70.)
If there are additional categories such as Business, Holiday, Personal, or Seasonal,
these will also be listed as filter options.
Editing a Task
1. Press Start > Organizer > Tasks.
2. Select a task and press
.
3. Press Edit (left softkey).
4. Select the information you wish to edit (Subject, Priority, Status, etc.)
and either press to clear one character at a time, or use the
navigation key to make changes within the text.
5. Press Done (left softkey) to save your changes.
Deleting a Task
1. Press Start > Organizer > Tasks.
2. Select a task and press Menu (right softkey) > Delete Task.
3. Press Yes (left softkey) to delete or No (right softkey) to cancel.
Beaming a Task via Bluetooth
Your device allows you to send and receive information wirelessly between up to
two Bluetooth-enabled devices at a time. (For more information, see "Beaming
Files" on page 102.)
To beam a task:
1. Press Start > Organizer > Tasks.
2. Select a task and press Menu > Beam Task. (The phone begins to
search for compatible devices in range.)
72 Tools
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select a target Bluetooth device from the list and press Beam (left
softkey). (The recipient’s phone will then display a confirmation screen
where they’ll have to agree to save the newly sent task to their own list.)
To receive a beamed contact:
When receiving a task sent by another compatible device, you are prompted to
accept the new incoming information and then store it to your current tasks list.
1. Read the confirmation screen and press Done (right softkey).
Managing Voice Memos
Use your device’s Voice Notes to record brief memos to remind you of important
events, phone numbers, or grocery list items.
Recording Voice Memos
1. Press Start > Organizer > Voice Notes > Record (left softkey).
2. Begin recording after the prompt.
To end the recording of your memo:
1. Press Stop (left softkey).
Note: Memo storage capacity is limited only by the amount of available memory.
Voice Memo Options
To rename voice memos you have recorded:
1. Press Start > Organizer > Voice Notes. Voice memo names start with
the prefix “Recording,” followed by a sequence number for each
recording, starting at 1.
2. Select a voice memo from the list and press Menu > Rename.
3. Either press
to clear one character at a time, or use the navigation
key to make changes within the voice memo name.
4. Press Done (left softkey) to complete the process.
To play the voice memos you have recorded:
1. Press Start > Organizer > Voice Notes.
2. Press
.
– or –
Press Menu (right softkey) > Play.
Tools 73
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing Voice Memos
To erase all voice memos:
1. Press Start > Organizer > Voice Notes.
2. Select a voice memo from the list and press Menu (right softkey) >
Delete.
Using the Tip Calculator
1. Press Start > More > Accessories > Tip Calculator.
2. Use the keypad to enter the bill amount.
3. Select the tip percentage (5%,10%, 15%, 20%, Manual setting). If
you're selecting Manual setting, use the keypad to enter the tip
percentage.
4. If you’re splitting the check, highlight the Split field and enter the
number of people in your party.
5. Press Calculate (left softkey) to complete the process.
Using the Calculator
Your device comes with a built-in calculator.
1. Press Start > More > Accessories > Calculator.
2. Enter numbers using your keypad.
• Press
• Press
to enter decimal points.
to change the numeric value from positive to negative.
3. Press (+, -, *, / ) using the navigation pad.
4. Press
to calculate the total.
5. Press Clear (left softkey) to clear all numbers.
Using the Smart Converter
Your device comes with a built-in conversion application.
1. Press Start > More > Accessories > Smart Converter.
2. Select a conversion type and press
.
• Select Currency, Length, Weight, Volume, Area, or Temperature.
3. Select a unit to convert from and then enter a value for the unit.
• Press
to add a decimal point. Your device can display up to six
digits after an inserted decimal point.
74 Tools
Download from Www.Somanuals.com. All Manuals Search And Download.
• For temperature conversions, press
either below or above zero.
to change the temperature to
• Press Clear (left softkey) to delete all numbers.
Using the Stopwatch
Your device comes with a built-in stopwatch.
1. Press Start > More > Accessories > Stopwatch.
2. Press Start (right softkey) to turn on the timer.
3. While the timer is running, you can press Record (left softkey) to record
one or more time lapses.
4. When you want to stop running or recording the timer, press Stop
(right softkey).
5. Press Reset (left softkey) to set the timer back to zero.
6. Press
to exit the application and return to the Home screen.
Using the World Clock
To view the time in over 50 different locations:
1. Press Start > Organizer > World Clock.
2. Press the left softkey to switch between World map and World clock
views.
3. Highlight Clock 1 or Clock 2 and then press Edit (right softkey) >
Assign to configure the clock.
4. Select a Country, City, and Time Zone (including Daylight Savings Time)
and press Done (left softkey).
File Viewer
File Viewer allows you to view documents in a variety of formats such as PDF,
Word, Powerpoint, and Excel on your device.
To view a document, you must transfer documents from a PC. If you have installed
the memory card, you can view the files stored in it.
To open the File Viewer:
• Press Start > File Viewer.
Tools 75
Download from Www.Somanuals.com. All Manuals Search And Download.
To view a document:
When you open File Viewer, the file directory of the phone displays.
1. Select the folder containing the document you want.
2. Select the file you want to open.
3. From a file view, you can use the keypad to quickly perform an option:
• Panning: To pan to a different part of the document, press the
Navigation keys to move to the direction you want.
• Zooming: To zoom in or out, press the Zoom soft key and then use the
left and right softkeys to Zoom In and Zoom Out as needed. To access
the Menu soft key again, press the
key.
• Fit to..: To fit the page on screen, press the Menu soft key and select
Fit To.. > Fit on screen. You can also select to Fit on origin, Fit on
width, Fit on height, or Reflow. The Reflow option will display the
document in a Notepad/text format.
• Navigating: To navigate the pages, press the Menu soft key and
select Prev page, Next page, or Go to page.
• Rotating: To rotate the screen 90 degrees clockwise, press
.
• Search: To search for a word, number, or phrase in the document,
press the Menu soft key to access the Search tool.
• Help: Access the Help screen for using File Viewer.
Task Manager
Your phone is a multi-tasking device. It can run more than one program at the
same time. However, multi-tasking may cause hang-ups, freezing, memory
problems, and additional power consumption. To avoid these problems, end
unnecessary programs using Task Manager.
To open Task Manager:
• Press Start > Accessories > Task Manager. The list of all the programs
currently running on your phone appears.
To manage running programs:
• To activate a program, press the Menu soft key and select Activate.
• To close a program, press the Stop (left softkey). To close all programs,
press the Menu soft key and select Stop all.
• To refresh the program list, press the Menu soft key and select Refresh.
76 Tools
Download from Www.Somanuals.com. All Manuals Search And Download.
microSD
This section details the features and options of your device’s microSD functionality.
Using Your Device’s microSD Card and Adapter
Using the microSD Card
Your device is capable of supporting an optional memory storage medium known
as a microSD memory card. This card allows you to expand your device's memory
space to store music, videos, photographs, and data in your device.
Memory cards with over 2 GB storage capacity will not work with this device.
Installing the microSD Memory Card
1. Locate the memory slot on the right side of the device and flip up the
microSD plastic cover.
microSD slot
plastic cover
microSD card
2. Make sure the microSD card's gold contacts are facing up.
3. Carefully insert the microSD card into the opening and firmly push it in
until you hear a click that indicates the card is securely installed.
4. With the card now securely installed, replace the plastic cover over the
microSD slot on the device.
Note: Be sure to use only recommended microSD cards (32MB–2 GB). Using non-
recommended microSD cards could cause data loss and damage your device.
microSD 77
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the microSD Memory Card
1. Flip up the microSD plastic cover on the right side of the device.
2. Firmly push the end of the card further into the device and release—the
card should pop out from the memory card slot. If this does not work,
repeat this process.
Note: The microSD card can be easily damaged by improper operation. Please be
careful when inserting, removing, or handling it.
Note: DO NOT remove a microSD card while files are being accessed or
transferred. Doing so will result in loss or damage of data.ꢀ
Make sure your battery is fully charged before using the microSD card. Your data
may become damaged or unusable if the battery runs out while using the microSD
card.
microSD Settings
Formatting the microSD Card
1. With the microSD card inserted, press Start > More > More > Settings
> More...> Memory Information.
2. Press Menu (right softkey) > Format Storage Card. (A warning will be
displayed.)
3. If you are sure you wish to remove all the files from your microSD card,
press Yes (left softkey), or press No (right softkey) to cancel the
operation.
78 microSD
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: The formatting procedure erases all the data on the microSD card, after
which the files CANNOT be retrieved. To prevent the loss of important data, please
check the contents before you format the card.
4. Press OK (left softkey) to return to the Memory Information screen.
5. Press Done (left softkey) to exit this screen.
Creating Folders in the microSD Card
The built-in camera or camcorder will create a My Pictures folder on an installed
microSD memory card the first time a picture or video is saved to the memory
card. Also, the camcorder will create a My Videos subfolder in the My Pictures
folder on an installed microSD card the first time the camcorder stores a video to
the card.
You can create other folders on the microSD card using the following steps.
1. Ensure that the microSD card is properly inserted.
2. Press Start > More > File Explorer > Menu (right softkey) > Storage
Card. (This accesses the microSD card and displays the root
directory.)
3. Select Edit > New Folder.
4. With the default “New Folder” name highlighted, use the keypad to
enter a new name and press
.
Note: When a picture or video is first taken, the device automatically creates a My
Pictures folder. See "Adjusting Settings" on page 86.
Vie•wiWngitMh tehme omriycrSopSaDcecaornd itnhseemrteidcr,opSreDssCSatradrt > More > More > Settings >
More... > Memory Information. (The total, free, and used memory space is
shown numerically in addition to a color-coded bar that shows used vs. free
memory space.)
microSD Folders
Viewing Your microSD Folders
All the files stored in your microSD card are organized into folders.
1. Press Start > More > File Explorer > Menu (right softkey) > Storage
Card.
microSD 79
Download from Www.Somanuals.com. All Manuals Search And Download.
To change the display mode:
1. Press Menu (right softkey) > View.
2. Select either Icons or List and press
.
• Icons displays all content (folders and files) as icons in rows of four.
• List displays all files as a list.
To change the sort order:
1. Press Menu (right softkey) > Sort By.
2. Select a sort key (Name, Date, Size, or Type) and press
Launching a File from the microSD Card
.
1. Press Start > More > File Explorer > Menu (right softkey) > Storage
Card.
2. Select a folder and press
to reveal the folder’s contents.
3. Select a file and press
to launch the file’s associated application.
Connecting Your Device to Your Computer
Before using your device’s mass storage capabilities, you need to prepare your
device’s data services to synchronize with your desktop or laptop computer. Once
the device is connected to the computer, you can transfer your data to or from the
microSD card.
The device can be configured to communicate with your computer as an extension
of your computer by using the ActiveSync® utility which is used to synchronize
computer applications with your device.
Before you can connect your device to your computer via USB, you will need to
install the ActiveSync application.
1. With the microSD card inserted, press Start > More > More > Settings
> Connections > More... > USB to PC.
2. Check the “Enable advanced network functionality” box by pressing
and press Done (left softkey).
3. Connect the other end of the cable to your computer.
80 microSD
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Plug one end of the included USB cable into your Power/Accessory
Interface connection located on the side of the device. (Wait for the
connection to be completed. When connected, your computer will
automatically detect your device.)
Correct
+
Incorrect
5. If ActiveSync was previously installed on your computer, the
application will prompt you to configure the new connection profile.
For now, click Cancel and close the application. Setup and
configuration of ActiveSync is covered in a later section (page 112).
6. Click the My Computer icon on the Windows desktop, and double-click
Mobile Device (which may appear as an icon or text, depending on
your View settings).
• A window opens showing a My Windows Mobile-Based Device icon
and additional folders which comprise your device's My Documents
folder. This folder may contain subfolders for My Pictures, My
Ringtones, Notes, and Templates. These folders must not be modified
or deleted.
• The My Documents directory (Start > More [left softkey] > File
Explorer > Menu [right softkey] > My Documents) provides access to
only those folders available on the device and not on the microSD
card.
7. Double-click the My Windows Mobile-Based Device icon to reveal all
the device contents (both storage card and internal device folders).
• My Documents contains all the built-in device folders that are part of
the My Documents group.
• Program Files contains all currently installed applications, such as
Camera, RSS Reader, and Windows Media Player®.
microSD 81
Download from Www.Somanuals.com. All Manuals Search And Download.
• Storage Card contains the microSD card directory of user-created
files and folders.
8. Double-click the Storage Card folder to reveal the contents of the
microSD card.
Transferring data directly to the microSD
The microSD card can be accessed and used just as easily as any other
communicating storage device.
1. From your Desktop, double-click My Computer > Mobile Device > My
Windows Mobile-Based Device > Storage Card entry to display the
folders and files available on the internal microSD card.
2. Open a folder and begin the transfer process of files for your computer
to the internal card’s target folder.
To remove the connection:
• When you have finished transferring data, unplug the USB cable from the
device.
General Precautions
• No driver installation is required for Windows 2000/ME/XP users. If you use
Windows 98 (or 98SE), you will need to download and install the USB mass
storage driver. Contact your service provider for this information.
• To avoid loss of data, do not remove the USB cable, the microSD card, or
the battery while files are being accessed or transferred.
• Do not use your computer to change or edit folder or file names on the
microSD, and do not attempt to transfer large amounts of data from the
computer to the microSD card. Doing so may cause the microSD card to
fail.
• Do not turn off or restart your computer, or put it into standby mode while
using a mass storage device. Doing so may result in loss or damage of
data.
• If you connect a mass storage device to a peripheral device, the peripheral
device may not work properly.
82 microSD
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera
You can activate the camera and take pictures when the phone is open. In addition
to taking pictures, you can also record, view, and send videos to your friends and
family with your phone’s built-in video camera. This section explains the features
and options of your device’s built-in camera.
Taking Pictures
Taking pictures with your device’s built-in camera is as simple as choosing a
subject, pointing the lens, and pressing a button.
Although the side button
can be used for clearing text, you can also quickly
activate the camera or camcorder by pressing and holding the side button.
To launch the camera or camcorder:
1. Press and hold
– or –
.
Press and hold
.
Note: The camera will open to its last-used function (camera or camcorder).
To take a picture:
1. Press Menu > Camera to activate camera mode. (Additional camera
options are available through the camera’s Menu. See "Camera Mode
Options" on page 84 for more information.)
2. Using the device’s display screen as a viewfinder, aim the camera lens at
your subject.
Camera 83
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press
or the thumbwheel until the shutter sounds. (The picture will
be saved in your selected storage area. See "General Settings" on page
86.)
• To return to camera mode to take another picture and save your
current image, press Save (left softkey).
Note: When the Autosave feature is enabled, your pictures are automatically stored
(page 87).
Camera Mode Options
When the device is in camera mode, press Menu (right softkey) and navigate
through the various options:
• Camera/Camcorder to toggle between camera and camcorder.
• Shooting Mode to select from the following image capture options:
• Single Shot, Multi Shot, Mosaic Shot, Frame Shot, or Night Shot.
(See "Taking Multiple Shots" on page 85.)
• Size to select a picture’s image size (1280x960, 640x480, or 320x240).
• Timer to activate the camera’s timer. (See "Setting the Self-timer" on page
84.)
• White Balance to adjust white balance based on changing conditions.
Select from Auto, Daylight, Cloudy, Tungsten, or Fluorescent.
• Effect to select a variety of color tones for the picture (No effects [default],
Sepia, B/W, or Negative).
• Help to view key functions in camera mode.
• Settings to adjust General, Camera, and Camcorder settings. (See
"Adjusting Settings" on page 86.)
Setting the Self-timer
1. From camera mode, press Menu > Timer.
2. Highlight the length of delay you want the timer to use (2 Sec, 5 Sec, or
10 Sec) and press
3. Press to start the timer. (A numeric countdown is displayed on the
upper left portion of the display screen.)
.
4. Get ready for the picture. (The device will make a chirping sound just
before taking the picture.)
84 Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel the Self-timer after it has started:
• Press
.
Note: While the self-timer is active, all keys are disabled except Back, End, and
Home.
Taking Multiple Shots
This feature allows you to take a series of continuous shots. When you take
multiple shots, thumbnails of those images are displayed in the viewfinder. When
multiple shots are selected, the image size is automatically set to 640 x 480.
1. From camera mode, press Menu (right softkey) > Shooting mode.
Note: If your device’s memory is full, the Shooting mode option is still displayed
but a picture can not be taken.
2. Select one of the following options and press
.
• Single shot to take a single picture.
• Multi shot to take a series of pictures. (This value is determined by
the Multi shot value set in the Settings menu [page 87].)
• Mosaic shot to take a series of four pictures displayed in a 2x2,
side-by-side, or top/bottom pattern.
• Frame shot to take a single picture surrounded by a fun picture frame
(frame [default], rabbit, bean, Charles, hair, Christmas, snow,
Halloween, birthday, or heart).
• Night shot to take a picture in low light levels.
3. Press
or the thumbwheel button to take the pictures. (The Multi
shot option will display 3,6,9, or 12 thumbnail pictures onscreen.)
Note: When the Autosave feature is enabled, your pictures are automatically stored
(page 87).
Camera 85
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Zoom
This feature allows you to zoom in on an object when you take a picture. Depending
on your resolution settings, you can adjust the zoom from 1x to 2x.
• From camera mode, press the navigation key up or down to adjust the
zoom. A zoom bar is displayed on the right side of the display screen.
Adjusting the Brightness
• From camera mode, press the navigation key left or right to adjust the
brightness level. (A brightness level bar is displayed across the bottom of
the display screen.)
Adjusting Settings
There are three categories of settings that can be made within camera/camcorder
mode:
• General
• Camera
• Camcorder
General Settings
These are options that apply to both the camera and camcorder such as Viewfinder,
Auto save, Default Storage, and Time Out.
1. Press Start > Camera > Menu (right softkey).
2. Use the navigation key to select the Settings icon (
) and press
.
3. Select General and press
.
Setting the viewfinder format:
1. From the General menu, select Viewfinder and use the navigation key to
select from one of the available options:
• Normal View displays a common set of icon indicators along the top
portion of the screen
• No Indicators displays only
and the softkey options (View and
Menu) along the bottom portion of the screen.
• Guideline view displays a 3x3 grid over the entire display to help you
compose the image. This view also provides the standard icon
indicators along the top portion of the screen.
2. Press Done (left softkey) to store the setting.
86 Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
Enabling Auto save:
1. From the General menu, select Auto save and use the navigation key to
select a setting:
• On automatically stores the new picture or video into the default
storage location. This option bypasses the Save option being
presented onscreen.
• Off causes an onscreen Save option to appear onscreen. This
requires that you choose whether to save or discard each new image/
video.
2. Press Done (left softkey) to store the setting.
Setting a default storage location:
1. From the General menu, select Default Storage and use the navigation
key to select a setting:
• My device stores new pictures or videos into the My Pictures folder
on the device.
• Storage card stores new pictures or videos into the My Pictures
folder on the memory card.
2. Press Done (left softkey) to store the setting.
Setting a time out value:
1. From the General menu, select Time Out and use the navigation key to
select an inactivity timeout setting (After 1 minute, After 2 minutes,
After 3 minutes, or Never.)
2. Press Done (left softkey) to store the setting.
Camera Settings
These options affect camera operation only.
1. Press Start > Camera > Menu (right softkey).
2. Use the navigation key to select the Settings icon (
3. Select Camera and press
4. Select and change settings using your navigation key.
) and press
.
.
• Quality to select the picture quality setting (Fine, Normal, or
Economy).
Camera 87
Download from Www.Somanuals.com. All Manuals Search And Download.
• Multi Shot to take simultaneous pictures.
• Number to select how many pictures are taken during a multishot
sequence (6, 9, 12, or 3).
• Speed to select how quickly the camera responds after
is
pressed (Normal, Low, or High).
• Mosaic Shot to select the number and orientation of the pictures
taken for a mosaic shot (2x2, 2Horz, or 2Vert).
• Sound to set sound options for camera functions.
• Shutter to select a shutter sound (Shutter1, Shutter2, Crystal,
Dingdong, Great, or Off).
• Zoom determines whether a sound is played when zooming (On or
Off).
• Brightness determines whether a sound is played when the
brightness is adjusted (On or Off).
5. Press Done (left softkey) to store these settings.
Camcorder Settings
These settings affect camcorder operation only.
1. Press Start > Camera > Menu (right softkey).
2. Use the navigation key to select the Settings icon (
) and press
.
3. Select Camcorder and press
.
4. Select and change settings using your navigation key.
• Sound to set sound options for camcorder functions.
• Start determines whether a sound is played when the camcorder
begins recording (On or Off).
• End determines whether a sound is played when the camcorder
stops recording (On or Off).
5. Press Done (left softkey) to store these settings.
Recording Videos
In addition to taking pictures, you can also record, view, and send videos to your
friends and family with your device’s built-in video camera.
1. Press Start > Camera > Menu > Camcorder to activate video mode.
– or –
88 Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
Press and hold
> Menu > Camcorder. (Additional video options are
available through the video mode Menu. See "Video Mode Options" on
page 89.)
2. Using the device's display screen as a viewfinder, aim the camera lens
at your subject.
3. Press
or the thumbwheel to begin recording.
• Press Cancel (right softkey) to reset the camcorder without saving.
4. Press
or the thumbwheel to stop recording.
5. Press Save (left softkey) to save the video to the default storage
location. (See "General Settings" on page 86.)
Video Mode Options
When the device is in camcorder mode, press Menu (left softkey) and navigate
through the various options:
• Camera/Camcorder to toggle between Camera and Camcorder. (For more
information see "Recording Videos" on page 88.)
• Size to select a video’s image size (320x240 or 176x144).
• Timer to activate the camcorder’s timer. (See "Setting the Self-timer" on
page 84.)
• White Balance to adjust white balance based on changing conditions.
Select from Auto, Daylight, Cloudy, Tungsten, or Fluorescent.
• Audio to toggle the microphone On or Off during recording.
• Effect to select a variety of color tones for the video (No effects [default],
Sepia, B/W, or Negative).
• Help to view key functions in camcorder mode.
• Settings to adjust General, Camera, and Camcorder settings. (See
"Adjusting Settings" on page 86.)
Selecting Video Settings
See "Camcorder Settings" on page 88.
Working with Pictures and Videos
Depending on the default storage location, your pictures and videos are stored in
the My Pictures folder either on the device or on the memory card.
The number of pictures and videos that can be stored in your device is not only
determined by the fixed amount of available onboard memory, but also by the size
of other files stored on your device such as Contacts, Voice Notes, and Calendar
entries.
Camera 89
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Deleting pictures will free up memory space on your device to enable you to
take more pictures.
The number of pictures and videos stored on the microSD card is much more
variable because of differences in memory card sizes.
Device Picture and Video Folders
To review your pictures and videos saved on the device:
1. Press Start > More > Pictures & Videos. (This navigates to the My
Pictures folder on the device. From there you can access videos by
opening the My Videos subfolder.)
2. Use your navigation key to view and scroll through the pictures.
• To launch the camera, highlight the camera icon and press
.
3. Select a picture or video and press
to view the file.
– or –
1. Press Start > More > File Explorer > My Documents > My Pictures.
2. Use your navigation key to view and scroll through the available pictures
or videos (within the My Videos subfolder).
microSD Picture and Video Folders
You can save pictures and videos directly to the microSD card using your device’s
pictures and videos settings. The maximum number of pictures or videos that can
be saved to the microSD card is limited only by the memory size of the card.
To review your pictures and saved to the storage card:
1. Press Start > More > Pictures & Videos > Menu (left softkey) > Folders
> Storage Card. (This navigates to the My Pictures folder on the
microSD on the device. From there you can access videos by opening
the My Videos subfolder.)
2. Select the My Pictures folder and press
.
3. Use your navigation key to view and scroll through the pictures.
• To launch the camera, highlight the camera icon and press
.
4. Select a picture or video and press
to view the file.
– or –
90 Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Press Start > More > File Explorer > Menu > Storage Card > My
Pictures.
2. Use your navigation key to view and scroll through the available pictures
or videos (within the My Videos subfolder).
My Pictures Folder Options
Whether a picture file is stored in either the device or on the storage card, the My
Pictures folder provides some general folder options.
1. Navigate to the My Pictures folder in either the device or storage card.
2. Highlight an image, press Menu for more options:
• Send to send the image or video in a message. (See page 93 for
details.)
• Beam... to send the image or video directly to another Bluetooth-
compatible device.
• Edit to display the following:
• Cut to remove the file from the current location, and temporarily
store it in the phone’s memory.
• Copy to make a copy of the current file and temporarily store it in
the phone’s memory.
• Paste to transpose the previously selected file (via either cut or
copy) file to the current folder.
• Delete to erase the currently selected file.
• Rename to change the name of the currently highlighted file.
• New Folder to create a new subfolder in the current location.
• Properties to provide Name, Location, File Type, File Size, and Date
Created information.
• View to display the current files as either a List or as a series of
Icons.
• Sort By to sort the entries by Name, Date, Size, or Type.
• My Device to display all folders on your device (including those on
the storage card).
• Storage Card to display all folders on your storage card.
• My Documents to display the My Documents folder stored in the
device.
Camera 91
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING: Do not modify or delete any folders other than the storage card or the
My Documents folders, as this could affect the device and its applications.
Picture and Video File Options
When you are viewing a picture or playing a video file from either the device or the
storage card, press Menu (right softkey) to display the following options:
• Zoom to change the level of detail in the picture displayed on the screen.
Select from Zoom In, Zoom Out, Fit to Screen, or Actual Size.
• Play Slide Show to view a sequence of pictures from the selected folder
(onl•y aTvoaielaxbitlethwehSelindetwshooowr,mproersespictures are saved to the folder).
or
.
• To rotate an image, press the navigation key up or down.
• Use as Home Screen to set the current image as the background for the
Home screen.
• Beam picture... to choose from a list of compatible devices and then send
the image via Bluetooth to a selected device. (See "Beaming Files" on page
102.)
• Edit•toRdoitsaptleaytothreotfaotlelotwheinpgicotputrieon9s0: degrees clockwise.
• Crop to cut out unwanted parts of the picture using your navigation
key to reframe the visible image.
• Auto Correct to correct the image for brightness, contrast, and color.
• Undo to undo the last action.
• Cancel to cancel the edit process.
• Save As to save a picture to the same location under a different name
using the keypad and
.
• Save to save the picture using either:
• Save to Contact... to assign the current picture as the Caller ID for a
selected Contacts entry. Select an entry and press
.
• Save As... to save the picture under a different name (see above).
• Properties to display a picture's name, file type, dimensions, file size, date
created, and protection status.
92 Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
• Options to access other image options:
• General to set the dimensions for images to be emailed (Large
[640x480], Medium [320x240], Small [160x120], or Original size)
and to rotate left 90 degrees or right 90 degrees when rotating a
picture.
• Slideshow to set the default orientation (landscape or portrait) for
pictures in slideshows; and to enable the slideshow to run as a
screensaver on a connected computer after a two-minute idle period.
• Print via Bluetooth to send the selected picture to a Bluetooth-compatible
prin•terU. sSeeeyo"PurrinntainviggaPtiicotnurkeesyvtioa sBplueectifoyotthhe" ofonllpoawgieng94s.ettings for the
printed image: Layout, Media Size, MediaType, Quality, Orientation,
Sides, Copies, and NumberUp.
• Press Print to send the file to the printer.
Sending Pictures and Videos by Email
Once you have taken a picture or a video, you can use the messaging capabilities
of your device to instantly share it with family and friends as an email attachment.
You will need to set up an email account before you can send pictures or videos.
(For more information, please see "Setting Up an IMAP or POP Account" on page
123.)
To send pictures or videos to email recipients:
1. Highlight a picture or video by following the steps listed in either
"Working with Pictures and Videos" on page 89 or "microSD Picture and
Video Folders" on page 90 (depending on the storage location of the
picture or video you wish to send).
2. Press Menu (right softkey) > Send.
3. Highlight an email account and press Select (left softkey).
4. Enter the recipient's email address in the To: field using the keypad.
(See "Entering Text" on page 25.)
5. Enter a message title in the Subject: field using the keypad.
6. Press the navigation key down to the message area below the
Attachment field and enter a message, if desired.
7. To insert an additional picture or video, press Menu (right softkey) >
Insert > Picture.
Camera 93
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Highlight a picture (or navigate to a video) and press
.
9. Press Send (left softkey) to send the message.
Printing Pictures via Bluetooth
Your device can send pictures to a Bluetooth-compatible printer, allowing you to
print pictures stored on your device without the need for connecting cables or
additional software.
Note: Make sure your battery is fully charged before using this feature and that
your printer is turned on and functioning properly.
To set up your device for Bluetooth printing:
1. Confirm that Bluetooth has been enabled on your device. (See "Turning
Bluetooth On and Off" on page 96.)
2. Press Start > More > More > Settings > Connections > Bluetooth.
3. Select Add new device... and press
.
4. Select a Bluetooth-enabled printer from the list of detected devices and
press Next (left softkey).
5. Use the keypad to enter a passcode and press Next (left softkey). (An
onscreen message will tell you if the connection was made successfully.
If the connection failed, please confirm the device is functioning
correctly and repeat steps 3 and 4.)
6. Press OK (left softkey).
7. Use the keypad and
to enter a display name for the printer and
press Next (left softkey).
8. From the Services screen, check the Printer box by highlighting the
option and pressing
.
9. Press Done (left softkey) twice to return to the Connections screen.
To print pictures directly from your device:
1. Press Start > More > Pictures & Videos. (This displays pictures and
videos stored on the device.)
– or –
Press Start > More > File Explorer > Menu > Storage Card > My
Pictures.
94 Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Highlight an image.
• If the picture has already been selected and opened, press Menu >
Print via Bluetooth.
3. From the list of available BPP-configured devices, highlight a printer and
press
.
4. Specify printer settings:
Note: On some printers, the image may be printed using the printer’s default
printing setup without the need to make any settings on your device.
• Layout: To print one large print or two, four, or nine smaller prints per
sheet.
• Media Size: To set the print size (4x6, 5x7, 8x10, letter, etc.). Print
sizes may vary according to the type of printer you have.
• Media Type: To set the paper type.
• Quality: To set the print quality.
• Orientation: To set the orientation of the printed page (Portrait or
Landscape).
• Sides: To choose from either Single-Sided or Double-Sided.
• Copies: To specify the number of copies to print at one time.
• NumberUp: To print a page number on each print.
Note: You may need to provide a passkey to continue printing.
5. When you have finished selecting the printer settings, press Print (left
softkey).
Camera 95
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth
Bluetooth is a short-range communications technology that allows you to connect
wirelessly to a number of Bluetooth devices, such as mono or stereo headsets,
hands-free car kits, and Bluetooth-enabled handhelds, PCs, printers, and wireless
phones. The Bluetooth communication range is usually up to approximately 10
meters (30 feet).
Turning Bluetooth On and Off
By default, your device’s Bluetooth feature is turned
off. Turning your Bluetooth on makes your device
discoverable (connectable).
To turn Bluetooth on:
1. Press the Power button to launch the Quick
List screen.
Note: On the Wireless Manager screen, select and
activate the All field to toggle the Bluetooth and your
wireless connection on and off.
2. Select Wireless Manager and press
.
3. Highlight the Bluetooth field and press
to enable Bluetooth.
• When Bluetooth is inactive, the Bluetooth field displays the
icon.
• When Bluetooth is active, the
icon is displayed on both thXis field
and on the screen.
4. Press Done (left softkey) to exit and return to the Start screen.
To turn Bluetooth off:
1. Press the Power button, select Wireless Manager, and press
2. Highlight the Bluetooth field and press to disable Bluetooth.
.
3. Press Done (left softkey) to exit and return to the Start screen.
Bluetooth Status Indicators
The following icons show your Bluetooth connection status at a glance:
•
•
– Bluetooth is active.
X– Bluetooth is disabled (default status).
96 Bluetooth
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Bluetooth Settings Menu
The Bluetooth Settings menu allows you to set up many of the characteristics of
your device’s Bluetooth service, including:
• Entering or changing the name your device uses for Bluetooth
communication
• Setting your device’s visibility (or “discoverability”) for other Bluetooth
devices
To access the Bluetooth Settings screen:
1. Press the Power button, select Wireless Manager and press
.
2. Highlight the Bluetooth field and press Menu (right softkey) > Bluetooth
Settings.
Note: Another way to navigate to the Bluetooth Settings screen is Start > More >
More > Settings > Connections > Bluetooth.
3. Press Menu (right softkey) to set your Bluetooth options.
• Select Turn Off Bluetooth to disable Bluetooth. If Bluetooth is
already turned off, this option will be Turn On Bluetooth.
• Select Turn On Visibility to make your device visible to other
Bluetooth-enabled devices. If visibility is already turned on, this
option will be Turn Off Visibility.
• Select COM Ports to set up a COM port (after pairing with a device)
by pressing Menu (right softkey) > New Outgoing Port.
About Discoverability (Visibility)
Making your device discoverable (visible) allows other devices to detect it when
they search for in-range Bluetooth-compatible devices. Your device must be turned
on and the built-in Bluetooth radio must also be turned on and discoverable. To
turn on your device's visibility, see step 3 in "To access the Bluetooth Settings
screen:" on page 97.
Bluetooth 97
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth Profiles
All of the Bluetooth settings you configure are stored in your device’s Bluetooth
user profile. You can use different profiles for specific Bluetooth functions.
• HSP: Headset Profile – This profile functions as a wireless ear jack. When
an incoming call is received, the ringer can be heard through the headset
instead of through the device. The call can then be received by pushing a
button. While using the device, you can use the headset instead of the
device by pushing a button on the headset, the same as inserting a jack into
the device. Increase or decrease the volume by using the volume key on the
side of the device.
• HFP: Hands-Free Profile – This profile functions as a wireless car kit.
Incoming calls ring to the hands-free headset or device. Calls can be
received by pressing a button on the headset or device. For dialing, four
functions are supported: recent call dial, voice dial, speed dial, and number
dial. Increase or decrease the volume by using the volume key on the side
of the handset.
Note: This feature may not be initially available.
• PAN: Personal Area Network Profile – This profile functions as a wireless
data cable, connecting a computer or PDA to a network through your
handset.
• OPP: ObjectPush Profile – This profile uses the Generic Object Exchange
profile services to send data objects between devices and can be used to
exchange objects like music files, pictures, and calendar (vCal) and
business cards (vCard).
• FTP: File Transfer Profile – This profile allows you to transfer files to or
from other Bluetooth-enabled devices.
• BPP: Basic Printing Profile – This profile enables simpler printing from
your device to a Bluetooth-enabled printer.
• A2DP: Advanced Audio Distribution Profile – This profile allows you to
transmit high quality stereo music from your device to other compatible
accessories including Bluetooth stereo headsets.
• AVRCP: Audio/Video Remote Control Profile – This profile enables your
device to remotely control compatible accessories including Bluetooth
stereo headsets. You can play, pause, stop, forward, backward from a
headset. (Playback functions may vary among Bluetooth accessories.)
98 Bluetooth
Download from Www.Somanuals.com. All Manuals Search And Download.
• PBAP: Phone Book Access Profile – This profile enables exchange of
Contacts information between devices. It is likely to be used between a car
kit and a mobile device to allow the car kit to display the name of the
incoming caller.
• HID: Human Interface Device Profile - This profile enables your device to
remotely control compatible accessories including Bluetooth Human
Interface Devices (such as a mouse, keyboard, etc).
• ActiveSync: To use ActiveSync® via Bluetooth wireless technology, you
need to configure the settings for both your computer and your device. For
more information, refer to "Synchronizing with ActiveSync" on page 112.
• OBEX: Object Exchange Protocol - This is an efficient, compact binary
protocol that enables a wide range of devices to exchange data
spontaneously in a simple, efficient manner.
• SPP: Serial Port Profile - This profile emulates a serial cable to provide a
wireless replacement for existing RS-232 based serial communications
applications.
Bluetooth Information Settings
Your device’s My Information Setting menu allows you to configure and review
many of your device’s Bluetooth settings, including:
• Entering or changing the name your device uses for Bluetooth
communication.
• Displaying your device’s Bluetooth address.
To Assign a Bluetooth Name to your Device:
By default, your device is given the Bluetooth name “SPH-I325”. You may wish to
assign a unique name to avoid confusion if there are other similar devices within
the Bluetooth coverage range.
1. Press Start > More > More > Settings > Connections > Bluetooth
Profiles > My Information Setting.
2. Select the Device Name field.
3. Press
to delete the default “SPH-I325” name.
4. Use the keypad to enter a new descriptive name. (This is the name
which will appear to other users when your Bluetooth visibility is turned
on.)
5. Press Done (left softkey) to return to the Bluetooth Profiles screen.
Bluetooth 99
Download from Www.Somanuals.com. All Manuals Search And Download.
To view your Bluetooth device address:
1. Press Start > More > More > Settings > Connections > Bluetooth
Profiles > My Information Setting.
2. Use either the thumbwheel or navigation key to scroll down the My
Information Manager page to review the Device Address Bluetooth uses
for your device.
Pairing Bluetooth Devices
Pairing Devices
The Bluetooth pairing process (bonding) allows you to establish trusted
connections between your device and another Bluetooth device. When devices are
paired, a passcode is shared between devices, allowing for fast, secure
connections while bypassing the discovery and authentication process.
Note: When pairing your device to other Bluetooth devices, ensure that your device
is not connected to your computer via a USB cable.
To pair your phone with another Bluetooth device:
1. Confirm that Bluetooth is enabled. (See "Turning Bluetooth On and Off"
on page 96.)
2. Press Start > More > More > Settings > Connections > Bluetooth.
3. Select Add new device.. and press
. (Your device will display a list
of discovered in-range Bluetooth devices.)
4. Select a device and press Next (left softkey).
5. Use the keypad to enter a passcode and press Next (left softkey). (An
onscreen message will tell you if the connection was made successfully.
If the connection failed, please confirm the device is functioning
correctly and repeat steps 3 and 4.)
6. Use the keypad and
to enter a display name for the Bluetooth
device and press Next (left softkey).
7. From the Services page, check the Hands Free box by highlighting the
option and pressing
.
• If you are connecting to a Bluetooth-capable printer, you must check
the Printer box on the Services page.
100 Bluetooth
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Due to different specifications and features of other Bluetooth-compatible
devices, display and operations may be different, and functions such as transfer or
exchange may not be possible with all Bluetooth-compatible devices.
Waiting for Pairing from an External Device
If you are going to be using a Personal Area Network (PAN) profile to pair with a
computer or PDA, you will need to allow the other device to initiate pairing with
your phone.
To allow your phone to be paired with another Bluetooth device:
1. Make sure your Bluetooth feature is active and your device is visible.
See "Using the Bluetooth Settings Menu" on page 97.
2. From the Confirm screen, press Yes (left softkey) to accept the
connection from the external Bluetooth device.
3. Enter the passcode (the same one used by the initiating device) in the
passcode field and press Next (left softkey).
Note: Although your device can connect to any Bluetooth-compatible device, only
two connections can be made at a time. If an incoming pairing request is rejected,
you might need to disable pairing with another device.
To inactivate Bluetooth devices in your list:
1. Press the Power button, select Wireless Manager and press
.
2. Highlight the Bluetooth field and press Menu (right softkey) >
Bluetooth Settings.
3. Highlight an entry from the list, press
4. Uncheck boxes for Services options by highlighting an option and
pressing
and press Next (left softkey).
.
5. Press Done (left softkey) to return to the Bluetooth Devices list.
To configure the settings of Bluetooth devices in your list:
1. Press the Power button, select Wireless Manager and press
.
2. Highlight the Bluetooth field and press Menu (right softkey) > Bluetooth
Settings.
Bluetooth 101
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Highlight a device and press Menu (right softkey) > Edit.
4. Use the keypad and
to change the device name and press Next
(left softkey).
5. Highlight an option and then press
to check or uncheck the box for
the option.
6. Press Done (left softkey).
To delete a Bluetooth device from your list:
1. Press the Power button, select Wireless Manager and press
.
2. Highlight the Bluetooth field and press Menu (right softkey) > Bluetooth
Settings.
3. Highlight a device and press Menu (right softkey) > Delete.
4. From the Confirm screen, press Yes (left softkey) to delete the device or
press No (right softkey) to cancel.
Beaming Files
Using an active Bluetooth connection, you can beam any data file (Contacts,
pictures, video, text, etc.) directly to another Bluetooth device. Both devices must
be active ( ), with visibility turned on, and the recipient must accept the
incoming data.
When you send data to another user, it is up to the recipient to either accept the
incoming data or reject the connection. If you are sending a picture to a Bluetooth-
compatible printer, you may need the passcode to establish a connection.
Beaming Contacts via Bluetooth
1. Press Start > Contacts.
2. Select an entry and press Menu (right softkey) > Send Contact > Beam.
(Your device will search for and list all discovered Bluetooth devices.)
Note: Each device that appears in the above search will initially appear as
"Unknown device." After a short time the correct display names will appear.
3. Highlight a device and press Beam (left softkey) to send the name card
to this recipient. (The recipient’s device will display an onscreen
message asking whether they would like to receive and save your
Contact entry to their list.)
102 Bluetooth
Download from Www.Somanuals.com. All Manuals Search And Download.
Beaming a Multimedia File
1. Press Start > More > Pictures & Videos. (This displays pictures and
videos stored on the device.)
– or –
Press Start > More (left softkey) > File Explorer > Menu (right softkey)
> Storage Card.
2. Highlight an image and press Menu (right softkey) > Beam.... (Your
device will search for and list all discovered Bluetooth devices.)
3. From the list of devices, highlight a device and press Beam. (The
recipient’s device will display an onscreen message asking whether they
would like to receive and save your picture or video to their device.)
Printing Pictures via a Bluetooth Printer
There are two ways you can print pictures via Bluetooth:
• Using the Print via Bluetooth option. See "Printing Pictures via a Bluetooth
Printer" on page 103.
• Using the Beam option (see below).
To print pictures via direct Beaming:
1. Follow steps 1 and 2 in “Beaming a Multimedia File.”
2. From the list of devices, highlight a printing device, press Beam, and
press
.
Note: Each device that appears in the above search will initially appear as
“Unknown device.” After a short time the correct display names will appear.
Using Hands-Free Devices
Your device allows pairing with hands-free devices. Although the pairing process is
similar to that of most other Bluetooth devices, the Hands-Free option must be
enabled within the Services menu to take advantage of this feature. (See "Pairing
Bluetooth Devices" on page 100.)
Some or all of the features below are available when using a Bluetooth hands-free
device.
• Voice recognition using the Voice Commands application
• Last number redial
• Call holding and call switching
Bluetooth 103
Download from Www.Somanuals.com. All Manuals Search And Download.
• Ending a call
• Switching to a private call
Note: For specific information about the features available with your hands-free
device, please refer to the user manual provided with your device.
Bluetooth OBEX FTP
Your device can fully utilize the OBEX FTP (object exchange file transfer protocol)
application provided to exchange data with other devices using Bluetooth
technology as the transport layer. To use your device as a Bluetooth OBEX FTP
server, ensure that your device's visibility is turned on so that the OBEX FTP client
can both search for and then automatically establish an OBEX FTP connection.
Bluetooth OBEX FTP Server Setting
If the OBEX FTP client attempts an OBEX FTP connection with your device,
Bluetooth pairing is usually required. The default shared folder of the OBEX FTP
server is “\My Documents”.
Exchanging Files via an OBEX FTP Server
When a client device attempts to upload files to or download files from your
device’s OBEX FTP server, a dialog box opens asking, “Someone is trying to get
your files. Do you accept the request?” or “A new file has arrived. Do you accept
the incoming file?”.
(The message that is displayed depends on whether a download or upload is
requested.) In either case, press Yes (left softkey) to confirm you want to allow an
upload to or download from your server.
Using a Bluetooth Virtual Serial Port
Many Bluetooth devices such as GPS devices, support the Bluetooth serial port
profile (SPP). You can use your device’s virtual Bluetooth serial port to make a
Bluetooth serial connection with such devices.
Assigning a Bluetooth Virtual Serial Port
1. Pair your phone with the target Bluetooth device. (See "Pairing
Bluetooth Devices" on page 100.)
2. From the Bluetooth Devices page, press Menu (right softkey) > COM
Ports > Menu (right softkey) > New Outgoing Port.
3. Select a device from the list and press Select (left softkey).
4. Select a COM port for the connection and press Done (left softkey).
104 Bluetooth
Download from Www.Somanuals.com. All Manuals Search And Download.
The port you selected above can now be used by other applications available on
your device. For example, you can use this new port to communicate with a third-
party Bluetooth GPS application.
Bluetooth 105
Download from Www.Somanuals.com. All Manuals Search And Download.
Applications
This section outlines Mobile applications such as: Internet Explorer®, Live
Search®, and RSS Reader.
Launching Internet Explorer
Your device comes with a version of Microsoft Internet Explorer with many of the
same features as the browser you use on your computer.
1. Press Start > Internet > Internet Explorer.
Navigating to a specific Web address:
1. Press Menu (right softkey) > Address Bar.
2. Press and hold
to delete the default Web address.
3. Enter a new address and press Go.
• A list of recently visited Web sites may appear below the address bar
in the event you would like to navigate to one of those Web sites
without having to retype the address.
Adding a Web page to your Favorites list:
When you find a Web page that you would like to revisit, it can be saved as a
Favorite link.
1. Press Menu (right softkey) > Address Bar.
2. Press and hold
to delete the current Web address.
3. Enter a new address beginning with www. and press Go.
4. When the page has fully loaded, press Menu (right softkey) > Add to
Favorites.
• To alter the default entry name, press and hold
to delete the
current name and then use the keypad to enter a new name.
5. Press Add (left softkey).
Browser Display Options:
You can change the way Web pages are displayed on your screen. You can adjust
text size, appearance, and the speed that pages are loaded (by blocking pictures).
1. Press Menu (right softkey) > View.
2. Select Text Size to adjust the default text size used by the browser to
display onscreen content.
• Choose from Largest, Larger, Medium (default), Smaller, or
Smallest.
106 Applications
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select the format and orientation for pages displayed on your screen.
Choose from:
• One Column to display a page in a single-column format.
• Fit To Screen to force the page to fit your available screen size.
• Desktop to retain the page's original format. (You may need to scroll
vertically or horizontally to view the entire page.)
• Full Screen to turn off menu and icon display to view the page using
your whole screen.
4. The Show Pictures option can be deselected to increase the speed at
which Web pages are loaded onto your screen.
• Highlight Show Pictures and press
to uncheck this option if it is
enabled.
Using Live Search
Your device comes with a built-in Web search engine called Live Search. This visual
search engine provides ready access to a variety of topics, searches, and maps.
Using Live Search from the Start Menu
1. Press Start > More (left softkey) > Live Search.
2. Read the service agreement and press Accept (left softkey).
3. Enter a text string to search. See "Entering Text" on page 25.
4. Once you’ve entered keywords press
to launch the Live Search
engine and view your results.
5. Use your navigation key and keypad to begin your searches:
• <Business or Category> to enter a term, keyword, or business name
as your search key.
• <City, State> to scroll through a list of available cities to further
refine a search.
• Highlight Choose a new location and press
to select a location
that is not currently listed.
• Use the thumbwheel to scroll through the alphabetical list of cities
and select a location that is not currently listed. You can choose a
specified city, from a map, or from Contacts.
– or –
Applications 107
Download from Www.Somanuals.com. All Manuals Search And Download.
Choose from one of the following search presets (select the
corresponding icon onscreen or press Menu [right softkey]):
• Categories to narrow your search by starting with a main category
and then refining your search.
• Select a category and then press the navigation key right to
expand a given category, or down to scroll through a list of
categories. When you find the category you want, press
.
Note: These searches are based on the location currently selected from the main
Live Search screen.
• Map displays a map of the currently selected city.
• Press Menu (right softkey) to access options such as Zoom Out,
Zoom In, and View (Road, Aerial, Full Screen, and Traffic).
• Directions allows you to enter a start and end point for the current
city to get driving directions.
• Enter starting and ending locations and press Route (left softkey)
to begin receiving the directions.
• Traffic provides a dynamic view of traffic conditions that is updated
every two minutes for the currently selected city.
• Press Menu (right softkey) to access options such as Zoom Out,
Zoom In, and View (Road, Aerial, Full Screen, and Traffic).
• Movies displays a listing of showtimes and locations for movies
showing within the selected area.
• Use your navigation key to select either the Movies tab or the
Theaters tab.
• Scroll to a movie or theater and press
information.
to get more
Using the RSS Reader
An RSS ("Really Simple Syndication") reader is a software application that resides
on your device and obtains syndicated Web content such as news headlines, music
and video podcasts, and blogs from different locations and displays them to you in
an easy-to-view stream on your display screen.
108 Applications
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Press Start > Internet > RSS Reader.
2. Press Menu (right softkey) > Update all. (This updates the RSS feeds to
all current categories.)
3. Press Done (left softkey) when updating has ended to return to the RSS
Reader - Feeds screen. (Each RSS entry is listed with the number of
feeds currently available for that entry.)
Creating a New Folder
1. Press Menu (right softkey) > Edit > New folder.
2. Enter a name for the new RSS folder and press OK (left softkey).
Adding a New Feed
1. Press Menu (right softkey) > Edit > New feed.
2. Enter the RSS URL for the feed, assign a folder location for the newly
created feed, and press OK (left softkey).
Deleting a Current Feed
1. Within a category, select a feed.
2. Press Menu (right softkey) > Edit > Delete.
3. Read the confirmation screen and press Yes (left softkey) to delete the
selected feed or No (right softkey) to cancel the operation.
Moving a Feed to Another Folder
1. Within a category folder, select a feed.
2. Press Menu (right softkey) > Edit > Move. (The selected field should
now be highlighted.)
3. Move the navigation key up or down to relocate the feed to a new folder
and press Done (left softkey).
Searching for Feeds
1. Select a category folder.
2. Press Menu (right softkey) > Feed search.
3. Enter a keyword to search.
4. Press Search (left softkey) to start. (Multiple search engines will search
on your keyword and return any searches that match your criteria.)
5. Select a search result from the list and press Add (left softkey) to insert
it into the currently selected folder.
Applications 109
Download from Www.Somanuals.com. All Manuals Search And Download.
Podcasts
Your device comes equipped with podcasts that you can easily access and transfer
to your device. When podcasts are downloaded, they are stored under Audio or
Video depending on the type of podcast you downloaded.
To download and listen to a podcast:
1. Press Start > Internet > Podcast.
2. Select Podcasts. You can press Menu (right softkey) to access the
following options:
• Search Podcast: Enter a keyword and press Search (left softkey).
• Subscribe to Podcast: Enter a URL and press Subscribe (left
softkey).
• Update Podcast: Select to update the selected podcast on your
device.
• Delete: Select to delete the selected podcast from the list.
• Cancel: Select to cancel the selected podcast from downloading.
3. Select a podcast from the list and press Get (left softkey).
• The podcast will start playing as soon as it completes downloading.
To play a previously downloaded podcast:
1. Press Start > Internet > Podcast.
2. Select Audio or Video depending on the type of podcast you want to
access.
3. Select a podcast from the list and press Play (left softkey).
Note: You can also access previously downloaded podcasts under Start > More
(left softkey) > File Explorer > Podcast.
Using Internet Sharing
Internet Sharing lets you use your device as a modem to connect your computer to
the Internet from anywhere on the network. This feature works by using either a
direct USB or wireless Bluetooth connection to your computer.
110 Applications
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT: Internet Sharing requires a Phone As Modem service plan. Please
contact your service provider to add this plan to your account before using this
feature.
• See "Connecting with Your Computer" on page 115.
1. Press Start > More > More > Internet Sharing.
2. Use either the navigation key or thumbwheel to scroll to the PC
Connection field and then select either USB or Bluetooth PAN.
• The Network Connection field cannot be altered and should read
Phone as Modem or Data.
3. Press Connect (left softkey) to establish an Internet connection.
• Confirm the connection by launching your computer’s Web browser
and going to a Web address that you know is valid (for example,
www.yahoo.com, www.google.com, or www.msn.com).
Applications 111
Download from Www.Somanuals.com. All Manuals Search And Download.
Synchronizing with ActiveSync
Your device features a built-in ActiveSync® utility that allows you to synchronize
data between your computer and your device. This software helps keep Contacts,
Calendar, Tasks, or Inbox data up-to-date.
ActiveSync Requirements
The computer to which you install ActiveSync (v4.5 or higher) must meet the
following hardware and software requirements:
• Operating system: Microsoft Windows XP with SP1 or later, Windows 2000
with SP4, Windows XP Tablet PC Edition, or Windows Server 2003.
• Web browser: Microsoft Internet Explorer 6 or later (required)
• Storage: Hard-disk drive with 12 to 65 MB of free space. (Actual
requirements will vary depending on features selected and system
configuration.)
• I/O Port: USB port (1.0 or higher)
• Optical drive: CD-ROM drive
• Video card: VGA graphics card or compatible video graphics adapter
supporting 256 colors or more.
Installing ActiveSync on Your Computer
1. Insert the Software Installation CD into your computer’s disc drive.
2. Click the Setup and Installation link from the onscreen disc menu.
3. Click the Install button to begin the installation of the ActiveSync
application to your computer.
• You can also download the latest version of Microsoft® ActiveSync
from the Microsoft site at:ꢀ
http://www.microsoft.com/windowsmobile/activesync/
Note: If the ActiveSync option is greyed out, you may have the application already
installed. It is recommended that you uninstall any previous version prior to
completing this new installation.
4. Launch the setup program and follow the onscreen instructions.
112 Synchronizing with ActiveSync
Download from Www.Somanuals.com. All Manuals Search And Download.
At the end of the installation process, you will see an ActiveSync icon in your
taskbar.
• Synchronization will begin automatically the first time your device is
connected to your computer.
• All selected synchronization items will be copied from your computer to
your device and Windows Explorer will create a shortcut of the Mobile
device on your Taskbar.
Synchronization Overview
Once you begin the synchronization process (by connecting your device to your
computer) the Microsoft ActiveSync window should automatically open.
Your device will remain connected to the computer after synchronization is
complete. If any selected content is changed on your computer (new email, photos,
playlist updates, etc.), Microsoft ActiveSync automatically resyncs the information
on the device. You can open the device’s file directory in ActiveSync on your
computer by clicking Tools > Explore Smartphone from the ActiveSync main
menu. You can then copy files quickly and easily from the device to the computer,
or vice versa.
Setting Up and Configuring ActiveSync
Your computer can assign a different profile to each device that is connected to it
via the ActiveSync application.
1. Right-click the ActiveSync icon found in your computer’s taskbar and
select the Connection Settings... option.
2. Make sure the following options are checked and click OK:
• Allow USB Connections
• Open ActiveSync when my device connects
3. Connect one end of the USB data cable (included with your device) into
the USB port on your computer.
Synchronizing with ActiveSync 113
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Connect the other end into the Power/Accessory Interface Connector.
(The Synchronization Setup Wizard will launch on your computer and
prompt you to set up a sync partnership with the device.)
Correct
+
Incorrect
Configuring ActiveSync Options
1. From the initial Synchronization Setup Wizard, click Next to begin the
setup process.
2. If you do not use Microsoft Exchange®, skip to step 3.
If you want to use Microsoft Exchange, see "Setting Up Exchange Server
via ActiveSync" on page 125.
• Check the box in the Synchronize directly with a server running
Microsoft Exchange field and click Next.
Note: The information in these fields is case-sensitive. Some fields may have
already been filled in by your device upon connection.
• Enter an Exchange Server Address (also known as the Outlook Web
Access server address).
• If your server requires an encrypted connection, check the box for
“This server requires an encrypted (SSL) connection.”
• Enter your User name, Password, and Domain information.
• To enable automatic email synchronization, check the box for Save
password.
• Click Next to continue.
114 Synchronizing with ActiveSync
Download from Www.Somanuals.com. All Manuals Search And Download.
3. From the Synchronization Options screen, check all information types
you would like to synchronize with your device and your computer.
(Contacts, Calendar, E-mail, Tasks, Favorites, Files, and Media.)
4. Click Next to continue.
5. Check the box for Allow wireless data connections if you would like to
allow this connection type (usually disabled if your device is using an
active USB connection), and click Next.
6. Click Finish to complete the setup process and establish the
partnership. ActiveSync will save the settings and begin synchronizing
your device with your computer based on those settings.
Note: Media synchronization can require that you launch Windows Media Player to
finish the process of setting up the partnership.
Connecting with Your Computer
You can connect the device to your computer by one of two methods:
• Using a USB cable (page 113).
• Using a Bluetooth connection (requires a COM port assignment).
Using Bluetooth with ActiveSync
1. Ensure that your computer's Bluetooth radio is turned on and visible.
• Your Bluetooth device will occupy a COM port when actively in use
on a USB port.
Note: The Bluetooth transmitter should be connected to an available USB port.
Refer to the Bluetooth device's manual for specific setup and configuration
instructions.
2. Pair your device and your computer.
• Press Start > More > More > Settings > Connections > Bluetooth.
• Select Add new device.. and press
. (See "To pair your phone
with another Bluetooth device:" on page 100.)
3. Right-click the ActiveSync icon found in your taskbar and select the
Connection Settings... option.
Synchronizing with ActiveSync 115
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Check the Allow connections to one of the following option and
choose the COM port used by your Bluetooth device from the drop-
down list.
5. Ensure that the Open ActiveSync when my device option is checked,
and click OK.
6. Right-click the ActiveSync icon found on your computer's taskbar and
select the Connection Settings... option.
7. Click Connect.. to initiate the wireless synchronization process.
Setting up Windows Media Player Sync Options
If you choose to synchronize multimedia files (pictures, video, and music), you will
need to set up a sync partnership between your device and your computer's
Windows Media Player.
It is recommended that you have the latest version of Windows Media Player
installed. (You can verify this by clicking Help > Check for Updates... from the
Media Player menu.)
1. From within the Synchronized items field (adjacent to the Media entry)
click the Setup must be completed link.
2. In the pop-up dialog box, click Yes to begin the setup process.
3. Launch Windows Media Player. (Your device appears within the left
pane.)
116 Synchronizing with ActiveSync
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Click on the Sync tab to launch the partnership process.
5. If the Device Setup screen (shown above) does not appear, right-click
on the phone icon (left pane) and select Setup Sync...
6. Enter a new name for the device (as it will appear within the Windows
Media Player’s left pane) and click Finish.
Synching Music via Windows Media Player
1. Click on any of the available library categories (such as Artist, Album,
or Songs) to display a list of all current music files detected by
Windows Media Player.
• For the purpose of this section, Artist has been selected.
Note: Songs that are copy-protected (DRM protection) will not be transferred and
can result in a transfer error message.
2. Select a song and drag it to the Sync List section of the application
(right pane). (The available memory indicator will change depending on
the size of the selected song.)
Synchronizing with ActiveSync 117
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
ꢁ
ꢂ
3. When you have finished selecting songs, click Start Sync to begin the
upload process from your computer to your device’s Music folder.
• If this list is later updated on your computer, it will be updated on
your device during the next synchronization session.
118 Synchronizing with ActiveSync
Download from Www.Somanuals.com. All Manuals Search And Download.
Service Features
Using Voicemail (Optional Feature)
Setting Up Your Voicemail
All unanswered calls to your device are automatically transferred to your voicemail,
even if your device is in use or turned off. Therefore, you will want to set up your
Voicemail and personal greeting as soon as your device is activated.
1. Press and hold
.
2. Follow the system prompts to:
• Create your passcode.
• Record your name announcement.
• Record your greeting.
Voicemail Notification
Your device alerts you to a new message in the following ways:
• By sounding the assigned ringer type.
• By displaying
at the top of the Home screen.
New Voicemail Message Alerts
When you receive a new voice message, your device alerts you and prompts you to
call your voicemail.
To display your Missed Log:
1. Press
once
– or –
Press Start > Call History.
Retrieving Your Voicemail Messages
You can review your messages directly from your wireless device or from any
other touch-tone device.
Note: When you are roaming off the network, you may not receive notification of
new voicemail messages. It is recommended that you periodically check your
voicemail by dialing 1 + area code + your wireless phone number. When your
voicemail answers, press , and enter your passcode. You will be charged
roaming rates when accessing voicemail while roaming off the network.ꢀ
Service Features 119
Download from Www.Somanuals.com. All Manuals Search And Download.
Your device accepts messages even when it is turned off. However, you are notified
of new messages only when your device is turned on and you are in a service area.
Note: You are charged for airtime minutes when you are accessing your voicemail
from your wireless device.
Using One-Touch Message Access
1. Press and hold
.
2. Press to access your voicemail settings.
Using Another Device to Access Messages
1. Dial your wireless phone number.
2. When your voicemail answers, press
3. Enter your passcode.
.
Tip: When you call into voicemail, you first hear the header information (date, time,
and sender information) for the message. To skip directly to the message, press 4
during the header.
Voicemail Menu Key
Following the prompts on the voicemail system, you can use your keypad to
navigate through the voicemail menu. Your device’s voicemail menu structure is
depended on your service provider.
Using SMS Text Messaging
With SMS Text Messaging, you can send and receive instant text messages
between your device and another messaging-ready device. When you receive a
new message, it will alert you by sounding the assigned ringer type and then
displaying the SMS icon (
) at the top of your screen.
In addition, SMS Text Messaging includes a variety of preset messages, such as
“I’m running late, I’m on my way,” that make composing messages fast and easy.
Use your device to customize your own preset messages (up to 256 characters).
Composing SMS Text Messages
1. Press Start > Messaging > Text Messages.
2. Press Menu (right softkey) > New.
120 Service Features
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press Menu (right softkey) > Add Recipients, select a Contacts entry,
and press
message.)
. (You may include an unlimited number of recipients per
4. Press Menu (right softkey) > Check Names. Recipient names currently
used within the To: field will be verified against the current Contacts list.
• Contacts to select a recipient from your Contacts list (qualifying
Contacts entries must contain a wireless phone number).
• Mobile phone number to manually enter a wireless phone number
that is not in Contacts.
Note: Use semicolons to separate multiple recipients.
5. Enter a message or choose one of the preset messages available within
the My Text area.
• To use a preset message, press Menu > My Text, select a message
and press Insert (left softkey).
• You can have any combination of both preset messages and text
within your message.
Note: There is a 140-character limit for text messages.
6. Review your message and select additional messaging options by
pressing Menu > Message Options and checking boxes for any
options you wish to enable.
• Request message delivery notifications notifies you when the
message has been successfully delivered.
• Priority assigns a priority to the outgoing message (Normal or
High).
• Send a callback number sends your callback number as part of the
outgoing text message.
• Callback number allows you to either use your default phone number
or a different number.
7. Press Done (left softkey) to return to the main message.
8. Press Send (left softkey) to deliver your message.
Service Features 121
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessing SMS Text Messages
To read an SMS Text message:
When you receive a text message, it will be displayed automatically on your
device’s screen (
).
1. Use your navigation key or thumbwheel to select the SMS option from
the Message Access section, and press
2. Select the message from the list and press
To reply to an SMS Text message:
.
.
1. While the message is open, press Reply (left softkey).
2. Compose your reply or use the preset messages.
• To type a message, use the keypad to enter your message.
• To use a preset message, press Menu (right softkey) > My Text,
highlight a message, and press Insert (left softkey).
3. Review your reply and press Send. (Review your message and select
additional messaging options by pressing Menu [right softkey] >
Message Options.)
Using Preset Messages
Preset messages make sending text messages to your friends, family, and co-
workers easier than ever. My Text messages let you quickly insert commonly used
phrases into the body of a new message or a reply to a message.
To add a preset message to a text message:
1. While the message is open, press Menu (right softkey) > My Text.
2. Highlight a message to insert, and press Insert (left softkey).
To edit a preset message:
1. While the message is open, press Menu > Edit My Text.
2. Select an existing preset message and press
.
3. Use the keypad to edit or replace the message and press
. (See
"Entering Text" on page 25.)
To delete a preset message:
1. Select a preset message from the list and press Menu (right softkey) >
Edit My Text. (The entire messages is highlighted.)
2. Press and hold
to delete the message.
122 Service Features
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press
(left softkey) to complete the deletion, or press
(right
softkey) to cancel the deletion.
Using Email
Setting Up an IMAP or POP Account
If you want to send and receive email messages through an ISP (Internet Service
Provider) account, or if you wish to use your device to access your corporate email
through a VPN (Virtual Private Network), you will first need to set up an IMAP
(Internet Message Access Protocol) or a POP3 (Post Office Protocol) account.
To automatically set up a POP or IMAP account:
Note: If you have multiple email accounts, you must configure each account with
its own settings.
1. From the Home screen, press Start > Messaging > New E-Mail
Account.
2. Use the keyboard to enter an email address.
• The device will attempt to determine the necessary communication
settings for both incoming and outgoing email messages.
3. Press Next (right softkey) to attempt to retrieve these settings
automatically. This process may take several minutes.
4. If the device was able to automatically retrieve the necessary settings,
press Next (right softkey).
– or –
If the device was unable to automatically obtain the settings, press
Previous (left softkey) to return to the initial Email Setup screen and
proceed with the manual setup process described in "To manually set
up a POP or IMAP account:" on page 124.
5. On the next screen, use the keypad to enter the name you wish to
associate with this email account.
• This name will appear within the list of available email accounts on
your Messages screen.
6. Press Next (right softkey).
7. Use the keypad to enter the account’s User name and Password
information.
Service Features 123
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Press
to check the “Save password” check box if you would like the
device to always remember your password during later access to this
email account.
9. Press Next (right softkey).
10. Select the time interval in the Automatic Send/Receive field that you
would like for your device to send and check for new email.
11. Press Finish (right softkey).
What You Will Need to Set Up Your IMAP or POP3 Account
If Auto configuration was unsuccessful, or if you need to access an account using a
VPN server connection, contact your ISP (Internet service provider) or network
administrator for the following information and enter it manually:
• Account type (IMAP or POP3)
• Incoming and Outgoing Mail Server Names
• Username and Password
• Domain Name
• Special Security Settings (if used)
For more information about configuring email accounts, go to:
http://www.microsoft.com/windowsmobile/help/smartphone/default.mspx
To manually set up a POP or IMAP account:
1. From the Home screen, press Start > Messaging > New E-Mail
Account.
2. Use the keyboard to enter an email address.
3. Press
to remove the check mark from the ‘Try to get e-mail settings
automatically from the Internet’ field that is highlighted.
4. Press Next (right softkey).
5. Select an option for ‘Your e-mail provider’ and press Next (right
softkey).
6. On the next screen, enter your name and a display name for the account
in the ‘Your name’ and ‘Account display name’ fields respectively.
7. Press Next (right softkey).
8. Enter the Incoming mail server information and select an account type
(POP3 or IMAP4).
9. Press Next (right softkey).
124 Service Features
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Enter your user name and password in the appropriate fields.
11. Press to check the “Save password” check box if you would like the
device to always remember your password during later access to this
email account.
12. Press Next (right softkey).
13. Enter the Outgoing (SMTP) mail server information.
14. Place a check mark on the appropriate fields by pressing
.
• Outgoing server requires authentication is used if you need to use a
password for outgoing mail in addition to incoming mail.
• Use the same name and password for sending e-mail to use the
same user name and password for outgoing mail as for incoming
mail.
15. Press Next (right softkey).
16. Select the time interval in the Automatic Send/Receive field that you
would like for your device to send and check for new email.
17. Press Finish (right softkey).
Setting Up Exchange Server via ActiveSync
Email, Contacts, and other information can be synchronized wirelessly on your
device using the Microsoft Exchange Server.
To synchronize wirelessly using Microsoft Exchange Server:
• Activate Data Services. Verify that the Data connection is correct. To enter
this information, press Start > More > More > Settings > Connections >
Dialup. (For more information, see "Installing ActiveSync on Your
Computer" on page 112.)
• Create an email account as described in "Setting Up an IMAP or POP
Account" on page 123.
• Work with your system administrator to collect the following information:
• Exchange Server address and domain name
• Your user name and password
1. Press Start > More (left softkey) > ActiveSync.
2. Press Menu (right softkey) > Add Server Source.
3. Enter the server address and press Next (right softkey). Remove the
check mark from 'This server requires an encrypted (SSL) connection'
if the server does not provide SSL.
Service Features 125
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Enter your user name, password, and domain name. (The password is
case-sensitive.)
5. Leave the Save password box checked to avoid having to enter the
password whenever you log on to this account, and press Next (right
softkey).
6. Check the boxes for the types of information you wish to synchronize
with the Exchange Server, and then press Finish (left softkey).
When the setup is complete, synchronize to retrieve your email
messages. You can also set up a sync schedule to automatically retrieve
messages by pressing Menu (right softkey).
Composing Email Messages
1. Press Start > Messaging > Outlook E-mail.
2. Press Menu (right softkey) > New.
3. Press Menu (right softkey) > Add Recipient, select a Contacts entry,
and press
message.)
. (You may include an unlimited number of recipients per
4. Press Menu (right softkey) > Check Names. Recipient names currently
used within the To: field will be verified against the current Contacts list.
Note: Use semicolons to separate multiple recipients.
5. Enter a subject and the message or choose one of the preset messages
available within the My Text area.
• To use a preset message, press Menu > My Text, select a message
and press Insert (left softkey).
• You can have any combination of both preset messages and text
within your message.
6. Review your message and select additional messaging options by
pressing Menu > Message Options and checking boxes for any options
you wish to enable.
• Priority assigns a priority to the outgoing message (Low, Normal,
High).
• Language allows you to assign a language to the message.
7. Press Done (left softkey) to return to the main message.
126 Service Features
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Press Send (left softkey) to deliver your message.
Accessing Email Messages
To read an email message:
When you receive an email message, it will be displayed automatically on your
device’s screen (
).
1. Use your navigation key or thumbwheel to select the Email option from
the Message Access section, and press
2. Select the message from the list and press
To reply to an email message:
.
.
1. While the message is open, press Reply (left softkey).
2. Compose your reply or use the preset messages.
• To type a message, use the keypad to enter your message.
• To use a preset message, press Menu (right softkey) > My Text,
highlight a message, and press Insert (left softkey).
3. Review your reply and press Send. (Review your message and select
additional messaging options by pressing Menu [right softkey] >
Message Options.)
Using Caller ID
Caller ID allows people to identify a caller before answering the device by
displaying the number of the incoming call. If you do not want your number
displayed when you make a call, follow these steps.
1. Press
2. Enter the number you want to call.
3. Press
.
.
To permanently block your number, call your service provider.
Responding to Call Waiting
When you’re on a call, Call Waiting alerts you to incoming calls by sounding two
beeps. Your device’s screen informs you that another call is coming in and
displays the caller’s device number (if it is available and you are in digital mode).
Service Features 127
Download from Www.Somanuals.com. All Manuals Search And Download.
To respond to an incoming call while you’re on a call:
• Press
. (This puts the first caller on hold and answers the second call.)
To switch back to the first caller:
• Press
again.
Making a Three-Way Call
With Three-Way Calling, you can talk to two people at the same time. When using
this feature, the normal airtime rates will be charged for each of the two calls.
1. Enter a number you wish to call and press
.
2. Once you have established the first connection, press
. (This puts
the first caller on hold and dials the second number.)
3. Dial the second number you wish to call and press
.
4. When you’ve connected to the second party, press
again to begin
your three-way call.
• If one of the parties in the current call hangs up, you and the
remaining caller still remain connected.
• If you initiated the call and are the first to hang up, all other callers are
disconnected.
Using Call Forwarding
Call Forwarding lets you forward all your incoming calls to another phone number
– even when your device is turned off. You can continue to make calls from your
device when Call Forwarding is activated.
Note: You cannot forward your calls to an international number.
To activate Call Forwarding:
1. Press
.
2. Enter the area code and phone number to which your future calls should
be forwarded.
3. Press
. (You will see a message and hear a tone to confirm the
activation of Call Forwarding.)
128 Service Features
Download from Www.Somanuals.com. All Manuals Search And Download.
To deactivate Call Forwarding:
1. From your device, press
. (You will see a message
and hear a tone to confirm the deactivation.)
Note: You are charged a higher rate for calls you have forwarded.
Service Features 129
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice Command
Voice Command enables you use your voice to perform multiple tasks such as
make phone calls, look up contacts, get calendar information, play and control
music, and start programs.
Voice Command Settings
To adjust the Voice Command setting prior to use:
1. Press Start > Voice Command.
2. Use the navigation key to change the values within the different fields.
These settings determine which applications you want to be accessible
when using the Voice Command feature.
• Voice Enabled activates the Voice Command feature. (Choose from
either Yes or No.)
• Availability allows you to make the feature either Always available
or Password Protected.
• Announcement Routing routes announcements via a designated
method. (Choose from either Bluetooth Only, Bluetooth if Available,
or Speaker Only.)
• Announcements restricts the use of announcements to either Free
Time Only or Always.
• Call Confirmations allows you to configure the use of call
confirmations. (Choose from either Yes or No.)
• Dial Confirmations allows you to configure the use of dialing
confirmations. (Choose from either Yes or No.)
• Announce Calls allows you to configure the use of announcement
calls. (Choose from either Yes or No.)
• Announce Messaging allows you to determine which type of
messages are announced. (Choose from either High Priority Only,
No, or Yes.)
• Calendar Reminders allows you to configure the use of calendar
event reminders. (Choose from either Yes or No.)
• Media Selections allows you to configure the use of the voice
command feature on media selections. (Choose from either Yes or
No.)
3. Press Done to store these values.
130 Voice Command
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a Call With Voice Command
To make a call with Voice Command:
1. Press and hold
and you’ll hear a beep. The
icon appears in the
upper-right of the screen.
2. After the beep, say, in a natural voice, “Call” and the name of the person
or “Dial” and the number you’d like to call. (For example, you can say,
“Call Bob Miller,” or “Dial 555-1234.”)
• Call: Lets you dial a phone number by saying a name saved in your
contact list.
• Dial: Lets you dial a phone number by saying the digits in the
telephone number.
• Lookup: Lets you retrieve contact information for any entry in your
contacts list.
• Open: This provides you with one-step access to many of your
device’s applications such as Calendar.
3. Your request will be repeated and you will be asked to verify. Say “Yes”
to call the number or person. (The number will automatically be dialed.)
Say “No” if you wish to cancel.
Tip: Keep in mind that Voice Command recognizes not only your voice, but any
voice, so that others can experience the same convenience if they use your device.
Voice Command 131
Download from Www.Somanuals.com. All Manuals Search And Download.
GSM Service Mode
Your device allows you to roam throughout the world using both CDMA (Code
Division Multiple Access) and GSM (Global System for Mobile Communications)
networks.
Your SIM Card
Your device comes with a preinstalled SIM (Subscriber Identity Module) card to
support roaming on compatible GSM networks. The SIM card must be activated for
international wireless service prior to its initial use.
To activate service, call your service provider.
Note: The SIM card included with your device contains information specific to your
device and should be retained with the device for use on GSM networks.
Installing Your SIM Card
1. Remove the battery cover.
• Press down with thumbs as indicated below.
• While applying pressure, slide cover away from the camera lens (as
shown below).
2. Remove the battery to gain access to the SIM card slot.
132 GSM Service Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Carefully insert the SIM card into the slot (shown below).
4. Reinstall the battery.
• Insert the battery into the opening on the back of the device, making
sure the connectors align. Gently press down to secure the battery.
• Position the battery cover and firmly slide it in until you hear a click.
5. Press
to turn the device on.
• Your device will turn on, search for
service, and then enter standby mode.
• If your device is not yet activated, or if
the SIM card is blocked, contact your
service provider to activate your device.
• If your device does not detect a SIM
card while in GSM mode, it will display
X
in the upper-right corner of the
Home screen.
Note: Your device’s battery should have enough charge to turn on, find a signal,
set up your voicemail, and make a call. You should fully charge your battery as
soon as possible. See "Charging the Battery" on page 15.
GSM Service Mode 133
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing Your SIM Card
1. Repeat steps 1 and 2 from "Installing Your SIM Card" on page 132 to
remove the battery cover gain access to the SIM card slot.
2. Carefully remove the SIM card from the slot (shown below).
3. Reinstall the battery.
• Insert the battery into the opening on the back of the device, making
sure the connectors align. Gently press down to secure the battery.
• Position the battery cover and firmly slide it in until you hear a click.
Using Your Device in GSM Mode
Note: In countries where CDMA networks are available, accessing service in these
countries is as simple as powering on your device. Call your service provider
before your trip to verify your service allows for international dialing. In countries
where CDMA service is not available you will need to access a GSM network.
Entering GSM Mode
Once you have inserted the SIM card, your device may be used in GSM mode on
GSM networks while traveling internationally. To operate on international GSM
networks, you need to switch the device from CDMA (default) mode to GSM mode.
To enter GSM mode from CDMA mode:
1. Press Start > International Usage. The following options appear in the
selection window:
• CDMA
134 GSM Service Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
• Int’l GSM
2. Use the navigation key to select the Int’l GSM service mode and then
press Apply (right softkey). A Confirm Reset dialogue box appears in
the display asking if you wish to change phone modes.
3. Type 'yes' in the box and press OK (right softkey). Press Cancel (left
softkey) to return to the previous screen.
• If you pressed OK, the device will power off and then restart in the
selected mode.
• When in GSM Mode, the International Usage menu has the
additional options Phone Settings (page 137) and SMS Sending
Options (page 141). Also, the
icon will appear to indicate that
your device is operating outside the domestic network.
Note: While in Canada, your device will operate only in CDMA mode; domestic
GSM networks will not be accessible via this device.
To return to CDMA mode from GSM mode:
1. Repeat the steps from "To enter GSM mode from CDMA mode:" on page
134, except select the CDMA service mode.
• When in CDMA Mode, the International Usage menu has no
additional options.
Making and Answering Calls in GSM Mode
When traveling on international GSM networks while in GSM mode, you can place
and answer calls the same as in CDMA mode. See "Making and Answering Calls" on
page 18. Certain features and services are not available in all countries.
Calling Emergency Numbers in GSM Mode
When traveling on international GSM networks while in GSM mode, you can place
calls to emergency services (even if your account is restricted or Call Barring is
active.)
To place calls to emergency services:
• Press
or
.
GSM Service Mode 135
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: If your device is within and connected to a GSM network, ensure that your
device is in GSM mode in order to place a call to emergency services. If your device
is outside of a GSM coverage area, you need to switch the device from GSM mode
to CDMA mode (page 135) to place a call to emergency services.
Using Plus (+) Code Dialing
Placing calls from one country to another country is simple with the Plus (+) Code
Dialing feature. When placing international calls, you can use Plus Code Dialing to
automatically enter the international access code for your location.
To use Plus Code Dialing to place an international call:
1. Press and hold
until a “+” is displayed on the device’s display
screen.
2. Enter the country code, city code or area code, and the phone number
you’re calling, and then press . (The access code for international
dialing will automatically be dialed, followed by the country code, city or
area code, and the phone number.)
Direct Dial
To place an international call by dialing direct:
1. Dial the international access code, the country code, the city or area
code, and the phone number, and then press to send the call.
Making Calls Within a Country (Local or Long Distance Dialing)
The steps for placing an international call within the same country are identical to
those for calling country-to-country, except it is not necessary to enter the country
code.
Calling Other Countries
To place from one country to another country:
1. Press and hold
to display the “+” symbol. The “+” symbol
automatically inserts the exit code for the country from which you are
calling.
2. Enter the country code of the person you are calling.
3. Enter the area code without the leading zero, followed by the number of
the person you are calling and press
.
136 GSM Service Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
Retrieve Voicemail Messages
The Voicemail box of your GSM device is the same as the one on CDMA.
To retrieve voicemail messages:
1. Press and hold
2. Press followed by your 10-digit phone number.
3. When you hear the voice greeting, press and enter your password,
followed by
International Data Roaming
until a “+” symbol appears on your device display.
.
You can keep connected via email and Web browsing when traveling in countries in
which data service is offered. Data services are available on both CDMA and GSM
networks; check with your service provider to determine the services available
where you are traveling.
Note: Prior to using your GSM Data Services, you must establish and utilize your
CDMA data services domestically on the network.
Setting GSM Services Options
There are several user options available for GSM operation under your device’s
Settings menu, including Call Forwarding, Call Barring, Call Waiting, SMS Sending
options, and GSM Network Selection. All these options require that your device be
in GSM mode and in a GSM roaming coverage area. (See "Entering GSM Mode" on
page 134.)
Tip: You can also access these services by pressing Start > International Usage >
Phone Settings.
Using Call Barring (GSM)
Call Barring allows you to block certain types of incoming and outgoing calls on
your device. This would be useful, for example if you allowed someone to use
your device for a short period of time.
To activate Call Barring (GSM):
1. Press Start > More > More > Settings > Phone > Call Barring.
2. Follow the onscreen instructions.
GSM Service Mode 137
Download from Www.Somanuals.com. All Manuals Search And Download.
Services
Caller ID
Caller ID displays the number (and name, if in your Phone Book) of incoming calls.
Caller ID in GSM mode must be enabled by the user.
To enable or disable caller ID:
1. Press Start > More > More > Settings > Phone > Caller ID.
2. Press Everyone, No one or Only my contacts and press
.
Call Waiting
Call Waiting notifies you of an incoming call even while you’re in a call. You can
then accept, reject, or ignore the incoming call. Unlike Call Waiting in CDMA mode,
Call Waiting in GSM mode must first be activated.
To use Call Waiting Internationally:
1. Press Start > More > More > Settings > Phone > Call Waiting.
2. Place a check mark in the “Provide call waiting notifications” field and
press
.
Voicemail and Text Messages
To activate voicemail settings:
1. Press Start > More > More > Settings > Phone > Call Options.
2. Select the Voicemail number field. The number to call your voicemail is
then displayed.
3. To change the number, press and hold
to erase the numbers, then
use the keypad to enter a new number and press
.
Note: This number is automatically set up when you receive your device. You will
probably not need to change it unless otherwise instructed by your carrier.
Selecting a Network
To access your email and browse the Web when traveling, you may need to
manually select the carrier that provides service in your location. Your device may
be able to select a network automatically.
138 GSM Service Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: If your screen displays “No Service” or “Limited Service”, this means that
your device is outside of a GSM coverage area. If the device does not automatically
select a network for you, you need to manually select one (page 139).
To automatically select a GSM data service for a specific country:
1. Press Start (left softkey) > More > More > Settings > Phone > More...
> Networks.
• The Current Network field displays a description of the currently
active network. From the Network selection field, select Automatic.
2. Press Menu (right softkey) > Find a New Network.
• When the Network Selection is set to Automatic, your device will
scan for networks and acquire one of the networks that are in the
Preferred Networks list. The checked networks inside the preferred
network list are the networks that can be acquired. If you want to
avoid a particular network, go into the Preferred Networks and
uncheck the network to remove it from the list.
3. Press
. The settings are sent to the network.
To manually select a GSM data service for a specific country:
1. Press Start (left softkey) > More > More > Settings > Phone > More...
> Networks.
• The Current Network field displays a description of the currently
active network.
2. From the Network selection field, select Manual.
3. Press Menu (right softkey) > Find a New Network.
• When the Network Selection is set to Manual, you can use the
Select a Network menu to select which network to use.
• To select a network, press Menu (right softkey) > Select a Network.
Use the navigation key to select a network from the available list and
press Select (left softkey).
4. Press Set Networks. The settings are sent to the network.
5. Press
.
GSM Service Mode 139
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: This setting is temporary. Any preferred networks you add will be erased if
you turn off your device.
Note: When traveling, it may be necessary to select a new compatible GSM data
service carrier each time you enter a new country.
Viewing Your Preferred Networks
1. Press Start (left softkey) > More > More > Settings > Phone > More...
> Networks.
• The Current Network field displays a description of the currently
active network.
2. From the Network selection field, select Manual.
3. Press Menu (right softkey) > Preferred Networks.
Adding a Preferred Network
If a network is not in the preferred list but you know that it exists, you can add it to
the preferred list.
To add a new preferred network:
1. Repeat steps 1 - 3 from “Viewing Your Preferred Networks” to access
the Preferred Networks screen.
2. Press Menu (right softkey) > Add Custom.
• Alternatively, you can select Add. Use the navigation key to select a
new network from the available list and press Select (left softkey).
(This newly added network then appears on the Preferred Networks
screen.)
3. Enter the numeric code and press Done (left softkey).
Note: This is a temporary setting. Any preferred networks you add will be erased if
you turn off your device.
To remove a preferred network:
1. Repeat steps 1 - 3 from “Viewing Your Preferred Networks” to access
the Preferred Networks screen.
140 GSM Service Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Use the navigation key to select a network from the available list and
uncheck the network to remove it from the list.
SMS Sending Options
Your device will store an SMS message temporarily if the recipient mobile phone is
offline. When in GSM mode, your device allows you to specify the period after
which the SMS message will be deleted so that the SMS message will not be
forwarded to the recipient mobile phone when it becomes online.
To set the SMS sending options:
1. Press Start (left softkey) > International Usage > SMS Sending
Options.
2. Select the Validity period: Max, 1 hour, 6 hours, 12 hours, 1 day, 1
week.
3. Press Done (left softkey).
GSM Service Mode 141
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety
Getting the Most Out of Your Reception
Keeping Tabs on Signal Strength
The quality of each call you make or receive depends on the signal strength in your
area. Your phone informs you of the current signal strength by displaying a number
of bars next to the signal strength icon. The more bars displayed, the stronger the
signal. If you’re inside a building, being near a window may give you better
reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of searching, a Power Save
feature is automatically activated. If your phone is active, it periodically rechecks
service availability. Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your phone returns to standby
mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it’s turned on, it
receives and transmits radio frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This power can range from
0.006 watts to 0.2 watts in digital mode.
Knowing Radio Frequency Safety
The design of your phone complies with updated NCRP standards described below.
In 1991-92, the Institute of Electrical and Electronics Engineers (IEEE) and the
American National Standards Institute (ANSI) joined in updating ANSI’s 1982
standard for safety levels with respect to human exposure to RF signals. More than
120 scientists, engineers and physicians from universities, government health
agencies and industries developed this updated standard after reviewing the
available body of research. In 1993, the Federal Communications Commission
(FCC) adopted this updated standard in a regulation. In August 1996, the FCC
adopted hybrid standard consisting of the existing ANSI/IEEE standard and the
guidelines published by the National Council of Radiation Protection and
Measurements (NCRP).
Maintaining Your Phone’s Peak Performance
There are several simple guidelines for operating your phone properly and
maintaining safe, satisfactory service.
• Speak directly into the mouthpiece.
142 Safety
Download from Www.Somanuals.com. All Manuals Search And Download.
• Avoid exposing your phone and accessories to rain or liquid spills. If your
phone does get wet, immediately turn the power off and remove the battery.
If it’s inoperable, return it to a dealer store or call Customer Support for
service.
Note: For the best care of your phone, only authorized personnel should service
your phone and accessories. Faulty service may void the warranty.
Maintaining Safe Use of and Access to Your Phone
Failure to follow the instructions outlined may lead to serious personal injury and
possible property damage.
Using Your Phone While Driving
Talking on your phone while driving (or operating the phone without a hands-free
device) is prohibited in some jurisdictions. Laws vary as to specific restrictions.
Remember that safety always comes first.
When using your phone in the car:
• Get to know your phone and its features, such as speed dial and re-dial.
• When available, use a hands-free device.
• Position your phone within easy reach.
• Let the person you are speaking to know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather conditions.
• Do not take notes or look up phone numbers while driving.
• Dial sensibly and assess the traffic; if possible, place calls when stationary
or before pulling into traffic.
• Do not engage in stressful or emotional conversations that may divert your
attention from the road.
• Dial 911 to report serious emergencies. It’s free from your wireless phone.
• Use your phone to help others in emergencies.
• Call roadside assistance or a special non-emergency wireless number
when necessary.
Following Safety Guidelines
To operate your phone safely and efficiently, always follow any special regulations
in a given area. Turn your phone off in areas where use is forbidden or when it
may cause interference or danger.
Safety 143
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF) signals.
However, RF signals from wireless phones may affect inadequately shielded
electronic equipment.
RF signals may affect improperly installed or inadequately shielded electronic
operating systems and/or entertainment systems in motor vehicles. Check with the
manufacturer or their representative to determine if these systems are adequately
shielded from external RF signals. Also check with the manufacturer regarding any
equipment that has been added to your vehicle.
Consult the manufacturer of any personal medical devices, such as pacemakers
and hearing aids, to determine if they are adequately shielded from external RF
signals.
Note: Always turn off the phone in health care facilities and request permission
before using the phone near medical equipment.
Turning Off Your Phone Before Flying
Turn off your phone before boarding any aircraft. To prevent possible interference
with aircraft systems, the U.S. Federal Aviation Administration (FAA) regulations
require you to have permission from a crew member to use your phone while the
plane is on the ground. To prevent any risk of interference, FCC regulations prohibit
using your phone while the plane is in the air.
Turning Off Your Phone in Dangerous Areas
To avoid interfering with blasting operations, turn off your phone when in a blasting
area or in other areas with signs indicating that two-way radios should be turned
off. Construction crews often use remote-control RF devices to set off explosives.
Turn off your phone when you are in an area with a potentially explosive
atmosphere. Although it is rare, your phone or its accessories could
generate sparks. Sparks could cause an explosion or a fire resulting in
bodily injury or even death. These areas are often, but not always,
clearly marked. These areas include:
• Fueling areas such as gas stations.
• Below deck on boats.
• Fuel or chemical transfer or storage facilities.
144 Safety
Download from Www.Somanuals.com. All Manuals Search And Download.
• Areas where the air contains chemicals or particles such as grain, dust or
metal powders.
• Any other area where you would normally be advised to turn off your
vehicle’s engine.
Note: Never transport or store flammable gas, liquid or explosives in the
compartment of your vehicle that contains your phone or accessories.
Restricting Children’s Access to your Phone
Your phone is not a toy. Children should not be allowed to play with it because they
could hurt themselves and others, damage the phone, dial 911 by mistake or make
calls that increase your phone bill.
Using Your Phone With a Hearing Aid Device
Your phone has been tested for hearing aid device compatibility. When some
wireless phones are used with certain hearing devices (including hearing aids and
cochlear implants), users may detect a noise which can interfere with the
effectiveness of the hearing device.
Some hearing devices are more immune than others to this interference noise, and
phones also vary in the amount of interference noise they may generate. ANSI
standard C63.19 was developed to provide a standardized means of measuring
both wireless phone and hearing devices to determine usability rating categories
for both.
Ratings have been developed for mobile phones to assist hearing device users find
phones that may be compatible with their hearing device. Not all phones have been
rated for compatibility with hearing devices. Phones that have been rated have a
label located on the box. Your Samsung phone has an M3 rating.
These ratings are not guarantees. Results will vary depending on the user’s
hearing device and individual type and degree of hearing loss. If a hearing device
is particularly vulnerable to interference noise; even a phone with a higher rating
may still cause unacceptable noise levels in the hearing device. Trying out the
phone with your hearing device is the best way to evaluate it for your personal
needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements for hearing aid
compatibility and are likely to generate less interference to hearing devices than
unrated phones. (M4 is the better/higher of the two ratings.)
Safety 145
Download from Www.Somanuals.com. All Manuals Search And Download.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more
usable with a hearing device’s telecoil (“T Switch”or “Telephone Switch”) than
unrated phones. (T4 is the better/higher of the two ratings. Note that not all hearing
devices have telecoils in them.)
Hearing aid devices may also be measured for immunity to interference noise from
wireless phones and should have ratings similar to phones. Ask your hearing
healthcare professional for the rating of your hearing aid. Add the rating of your
hearing aid and your phone to determine probable usability:
• Any combined rating equal to or greater than six offers excellent use.
• Any combined rating equal to five is considered normal use.
• Any combined rating equal to four is considered usable.
Thus, if you pair an M3 hearing aid with an M3 phone, you will have a combined
rating of six for “excellent use.” This is synonymous for T ratings.
To ensure that the Hearing Aid Compatibility rating for your phone is maintained,
secondary transmitters such as Bluetooth and WLAN components must be
disabled during a call. See "Turning Bluetooth On and Off" on page 96 for
instructions to disable these components.
More information about hearing aid compatibility may be found at: www.fcc.gov,
www.fda.gov, and www.accesswireless.org.
More information about hearing aid compatibility may be found at: www.fcc.gov,
www.fda.gov, and www.accesswireless.org.
Getting the Best Hearing Device Experience With Your Phone
To further minimize interference:
• Set the phone’s display and keypad backlight settings to ensure the
minimum time interval:
1. Press Start > More > More > Settings > Power Management > Display
time out or Keypad backlight time out.
2. Select the minimum time setting and press
.
• Phones with embedded antennas may produce more interference.
• Move the phone around to find the point with least interference.
146 Safety
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the Battery
Protecting Your Battery
The guidelines listed below help you get the most out of your battery’s
performance.
• Use only Samsung approved batteries and desktop chargers. These
chargers are designed to maximize battery life. Using other batteries or
chargers voids your warranty and may cause damage.
• In order to avoid damage, charge the battery only in temperatures that
range from 32º F to 113º F (0º C to 45º C).
• Don’t use the battery charger in direct sunlight or in high humidity areas,
such as the bathroom.
• Never dispose of the battery by incineration.
• Keep the metal contacts on top of the battery clean.
• Don’t attempt to disassemble or short-circuit the battery.
• The battery may need recharging if it has not been used for a long period of
time.
• It’s best to replace the battery when it no longer provides acceptable
performance. When used correctly, the battery can be recharged hundreds
of times before it needs replacing.
• Don’t store the battery in high temperature areas for long periods of time.
It’s best to follow these storage rules:
• Less than one month:ꢀ
-4º F to 140º F (-20º C to 60º C)
• More than one month:ꢀ
-4º F to 113º F (-20º C to 45º C)
Disposal of Lithium Ion (LiIon) Batteries
For safe disposal options of your LiIon batteries, contact your nearest service
center.
Special Note: Be sure to dispose of your battery properly. In some areas, the
disposal of batteries in household or business trash may be prohibited.
Note: For safety, do not handle a damaged or leaking LiIon battery.
Safety 147
Download from Www.Somanuals.com. All Manuals Search And Download.
Acknowledging Special Precautions and Industry Canada Notice
Cautions
Any changes or modifications to your phone not expressly approved in this
document could void your warranty for this equipment, and void your authority to
operate this equipment. Only use approved batteries, antennas and chargers. The
use of any unauthorized accessories may be dangerous and void the phone
warranty if said accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of equipment and can be
broken. Avoid dropping, hitting, bending or sitting on it.
Information to User
This equipment has been tested and found to comply with the limits of a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation; if this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient / relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rates (SAR) for Wireless Phones
The SAR is a value that corresponds to the relative amount of RF energy absorbed
in the head of a user of a wireless handset.
The SAR value of a phone is the result of an extensive testing, measuring and
calculation process. It does not represent how much RF the phone emits. All phone
models are tested at their highest value in strict laboratory settings. But when in
operation, the SAR of a phone can be substantially less than the level reported to
the FCC. This is because of a variety of factors including its proximity to a base
station antenna, phone design and other factors. What is important to remember is
148 Safety
Download from Www.Somanuals.com. All Manuals Search And Download.
that each phone meets strict federal guidelines. Variations in SARs do not
represent a variation in safety.
All phones must meet the federal standard, which incorporates a substantial
margin of safety. As stated above, variations in SAR values between different model
phones do not mean variations in safety. SAR values at or below the federal
standard of 1.6 W/kg are considered safe for use by the public.
The highest reported SAR values of the SPH-i325 are:
- Cellular CDMA mode (Part 22):
Head: 1.00 W/kg; Body-worn: 1.28 W/kg
- PCS mode (Part 24):
Head: 1.36 W/kg; Body-worn: 0.862 W/kg
Owner’s Record
The model number, regulatory number and serial number are located on a
nameplate inside the battery compartment. Record the serial number in the space
provided below. This will be helpful if you need to contact us about your phone in
the future.
Model: SPH-i325
Serial No.:
User Guide Proprietary Notice
CDMA Technology is licensed by QUALCOMM Incorporated under one or more of
the following patents:
4,901,307 5,109,390 5,267,262 5,416,797
5,506,865 5,544,196 5,657,420 5,101,501
5,267,261 5,414,796 5,504,773 5,535,239
5,600,754 5,778,338 5,228,054 5,337,338
5,710,784 5,056,109 5,568,483 5,659,569
5,490,165 5,511,073
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat.
5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents pending.
Safety 149
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
STANDARD LIMITED WARRANTY
What is Covered and For How Long? SAMSUNG Electronics Canada Inc. ("SAMSUNG") warrants to the
original purchaser ("Purchaser") that SAMSUNG's phones and accessories ("Products") are free from
defects in material and workmanship under normal use and service for the period commencing upon
the date of purchase and continuing for the following specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case/Pouch/Holster
Game Pad
90 Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned upon proper use of Product by Purchaser.
This Limited Warranty does not cover: (a) defects or damage resulting from accident, misuse, abuse,
neglect, unusual physical, electrical or electromechanical stress, or modification of any part of Product,
including antenna, or cosmetic damage; (b) equipment that has the serial number removed or made
illegible; (c) any plastic surfaces or other externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in conjunction with accessories,
products, or ancillary/peripheral equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance, installation, or adjustment; (f) installation,
maintenance, and service of Product; or (g) Product used or purchased outside Canada. This Limited
Warranty covers batteries only if battery capacity falls below 80% of rated capacity or the battery leaks,
and this Limited Warranty does not cover any battery if: (i) the battery has been charged by a battery
charger not specified or approved by SAMSUNG for charging the battery; (ii) any of the seals on the
battery are broken or show evidence of tampering; or (iii) the battery has been used in equipment
other than the SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty period, SAMSUNG will repair or
replace, at SAMSUNG's sole option, without charge to Purchaser, any defective component part of
Product. To obtain service under this Limited Warranty, Purchaser must return Product to an
authorized phone service facility in an adequate container for shipping, accompanied by Purchaser's
sales receipt or comparable substitute proof of sale showing the date of purchase, the serial number of
Product and the sellers' name and address. To obtain assistance on where to deliver the Product, call
Samsung Customer Care at 1-800-Samsung. Upon receipt, SAMSUNG will promptly repair or replace
the defective Product. SAMSUNG may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new
parts or components when repairing any Product or replace Product with a rebuilt, reconditioned or
new Product. Repaired/replaced leather cases, pouches and holsters will be warranted for a period of
ninety (90) days. All other repaired/replaced Product will be warranted for a period equal to the
remainder of the original Limited Warranty on the original Product or for 90 days, whichever is longer.
All replaced parts, components, boards and equipment shall become the property of SAMSUNG. If
150 Warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
SAMSUNG determines that any Product is not covered by this Limited Warranty, Purchaser must pay all
parts, shipping, and labour charges for the repair or return of such Product.
What Are the Limits On SAMSUNG's Liability? EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
·
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE
OR USE;
·
·
·
·
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN
EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL
IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION OF LAW, INCLUDING
IF APPLICABLE THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS
WRITTEN WARRANTY STATED HEREIN. SOME JURISDICTIONS DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO
YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND
RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE PRODUCT OR
ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF USE OF THE PRODUCT OR FROM
THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL
OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES
ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT
COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT
OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. SOME
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO
YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY FROM PROVINCE TO PROVINCE. THIS LIMITED WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND SHALL
BE PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS HELD
ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY FOR THE REMAINDER OF THIS
LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE THIRD-PARTY SOFTWARE OR
EQUIPMENT IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO WARRANTIES OR
REPRESENTATIONS AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
Warranty 151
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY
OF ANY THIRD-PARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR OTHERWISE,
INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY
SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE
DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS
THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure between Purchaser and SAMSUNG, and
SAMSUNG's Product pricing reflects this allocation of risk and the limitations of liability contained in
this Limited Warranty. The agents, employees, distributors, and dealers of SAMSUNG are not authorized
to make modifications to this Limited Warranty, or make additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer advertising or presentation, whether oral or written,
do not constitute warranties by SAMSUNG and should not be relied upon.
Samsung Electronics Canada, Inc.
©2008 Samsung Electronics Canada, Inc.. SAMSUNG is a registered trademark of Samsung Electronics
Co., Ltd. and its related entities.
No reproduction in whole or in part allowed without prior written approval.
Specifications and availability subject to change without notice.
#861826 v2 | 4032342
152 Warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Deleting 57
Numerics
Filtering 56
3-Way Calling 128
Making a Call 56
Options 55
Resetting Timers 56
Saving a Phone Number 56
Timers 55
A
ActiveSync
Configuration 113, 125
Windows Media Player 116
Add Recipients 121, 126
Alarm Clock 67
Using 20
Call Options
Any Key 36, 37
International Code 37
Voice mail Number 37
Call Waiting 127
Call waiting 138
Caller ID 127, 138
Camera 83–95
Answering Calls 19
B
Back-Clear Key 43
Backlight Time-Out 34
Battery
Taking Pictures 83
Categories 60, 71
Certificates 50
Capacity 14, 15
Disposal 147
Check Names 121, 126
Communication
Data Cable 113
Installing 14
Beam 72
Receiving a Contact 73
Task 72
Wireless Bluetooth 115
Contacts 58–63
Adding an Entry 58
Beaming 63
Beaming
Files 102
Multimedia Files 103
Bluetooth 96–105
Deleting a Device 102
Hands-Free 103
Inactivating Devices 101
My Information Settings 99
OBEX FTP 104
Dialing From 24
Editing a Phone Number 62, 61
Finding 59, 60
D
Default Storage
Pairing 100, 101
Settings Menu 97, 102
Camera, Camcorder 87
Dialing Options 18
Discoverability 97
C
Discreet Mode 42
Display Screen Symbols 9
Display Screen Wallpaper 33
Display Settings 31–33
Driving Directions 108
DRM 117
Calculator 74
Calendar 64–67
Call
Making 4
Call Forwarding 128
Call History 54–57
Index 153
Download from Www.Somanuals.com. All Manuals Search And Download.
Activating Service 132
Calling Emergency Numbers 135
Data Roaming 53, 137
GSM Mode 134
E
Email 126
IMAP Account 123, 124
POP Account 123, 124
Retrieving Voicemail Messages
137
End Key 12
Entering Characters
Preset Messages 28
Symbols 27
SIM Card 132
Internet Explorer
Browser Display Options 106
Internet Sharing 110
Event
Adding 64, 65
Deleting an Event 66
Reviewing 66
K
Exchange Server 125
Keypad Backlight Time-Out 35
Keypad Tone 30
F
L
Feed 109
File Viewer 75
Fn key 44
Function Key 43
Live Search 107
Main Application 107
LiveSearch
Directions 108
Map 108
G
Traffic 108
GSM
Location Settings 35
Lock Code
Calling Internationally from
another country 136
Services Options 137
GSM Mode 134
Changing 48
Removing 48
Locking
Entering 134, 135
Manually 49
Making and Answering Calls 135
Locking Your Device 47
H
M
Home Screen
Configuring 31
Layout 32
Messaging
Account Settings 40
Deleting Old Messages 41
Sending Options 39
Messaging Settings 38
microSD
Start Menu Style 33
Time Out 33
Wallpaper 33
Creating Folders 79
Displaying Folders 79
Formatting 78
I
Icon Glossary 9
Indicator
Installation 77
Launching a File 80
Removal 78
signal strength 10
International
Viewing Memory Space 79
154 Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Mobile Applications 106–111
My Text 28
Preferred Networks 140
Profiles 31
N
R
Network
R2VS 30
Selecting 138
Note
Composing 68
Deleting 69
Reading 68
Sending via email 69
Notepad 68
Reviewing Pictures 89
Reviewing Videos 89
Ringer Types 29
Roaming 52
Other Digital Networks 52
RSS Reader 108
S
O
Security Menu 47
Self-Timer 84
Options
My Pictures Folder 91
Pictures & Video Files 92
Outlook
Service
Setting Up 1
Settings
Creation via ActiveSync 125
Adjusting General Settings 86
Camcorder 88
SIM Card
P
Installing 132
Removing 134
Passcode 100
Phone Customization
Assigning Application to Speed
Dial 44
Smart Converter 74
SMS 69, 120
SMS Sending Options 141
SMS Text Messaging 120–123
Softkeys
Fn Key 43
Message Key 43
Regional Settings 46
Time and Date 45
Phone Number
Displaying 18
Using 12
Sound
Call Alert Notifications 30
Message Notifications 29
Profiles 31
Finding 23
Phone Settings
Call Options 36
R2VS Headphone 30
System Sounds 30
Voice Calls 29
Location Settings 35
Power Management 34–35
Pictures and Videos by Email
93–94
Sound Settings 29
Special Numbers 49
Speed Dialing 24
Assigning Numbers 58
Stopwatch 75
Synchronization 112–118
Overview 113
Plus (+) Code Dialing 24
Podcasts 110
Power Management
Backlight 34
Display 34
Keypad Backlight 35
Index 155
Download from Www.Somanuals.com. All Manuals Search And Download.
T
W
Taking Pictures 83–88
Task Manager 76
Tasks 70
Windows Media Player
DRM 117
Sync List 117
World Clock 75
Beaming via Bluetooth 72
Completing 70
Deleting 72
Editing 72
Filtering the List 71
Options 71
Sorting and Filtering 71
Three-Way Calling 128
Timer 84
Tip Calculator 74
Tools 64–76
TTY Use 41–42
Turning Your Phone On and Off 8
U
Understanding Your Phone
Rear View of Your Phone 7
Unlocking the Device 49
Unlocking Your Device 48
V
Videos
Recording 88
Voice Command 130–131
Making a Call 131
Settings 130
Voice Memos 73–74
Erasing 74
Options 73
Playing 73
Recording 73
Voicemail
Accessing from Another Number
120
Menu Key 120
Retrieving 119
Setting Up 4, 119
156 Index
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Quantum Universal Remote 313 User Guide
Roland Electronic Keyboard RD 300GX User Guide
Samsung Cooktop CTI613EH User Guide
Samsung Home Theater System 20051111103302296 User Guide
Samsung Stereo System MM DX7 User Guide
Sanyo Air Conditioner 12XS71 User Guide
Saturn Automobile 2006 Ion User Guide
Schumacher Welding System PID 750 User Guide
Sears Humidifier 75814417 User Guide
Seiko Group Printer TM L60 User Guide