SyncMaster 1200NF
Color Monitor
Owner’s
Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Unpacking Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Setting up Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Connecting Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Plug and Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installing the Video Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
®
Windows 98 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
®
Windows 95 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Self-Test Feature Check (STFC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Warm-up Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Adjusting Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
User Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Automatic Save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Direct-Access Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Menu Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Recall. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Pincushion/Trapezoid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Parallel/Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Pinbalance/Linearity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Side Pin Corner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
PinBalance Corner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Clear Moiré . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Purity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Convergence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Sharpness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Degauss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Sync. Input Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Video Input Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
D-SUB/BNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Menu Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Menu Duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Languages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
AutoSize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
PowerSaver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Display Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
English
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
Before connecting the AC power cord to the DC adapter outlet, make sure the voltage designa-
tion of the DC adapter corresponds to the local electrical supply.
1
2
3
4
5
6
Never insert anything metallic into the monitor openings. Doing so may create the danger of
electric shock.
To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should
open the monitor’s case.
Never use your monitor if the power cord has been damaged. Do not allow anything to rest on
the power cord, and keep the cord away from areas where people can trip over it.
Be sure to hold the plug, not the cord, when disconnecting the monitor from an electric socket.
Openings in the monitor cabinet are provided for ventilation. To prevent overheating, these
openings should not be blocked or covered. Also, avoid using the monitor on a bed, sofa, rug, or
other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If
you put the monitor in a bookcase or some other enclosed space, be sure to provide adequate
ventilation.
Put your monitor in a location with low humidity and a minimum of dust.
7
8
Do not expose the monitor to rain or use it near water (In kitchens, near swimming pools, etc.).
If the monitor accidentally gets wet, unplug it and contact an authorized dealer immediately.
You can clean the monitor with a damp cloth when necessary, but be sure to unplug the monitor
first.
Place the monitor on a solid surface and treat it carefully. The screen is made of glass and can
be damaged if dropped or hit sharply.
9
10
11
Locate your monitor near an easily accessible AC outlet.
If your monitor does not operate normally – in particular, if there are any unusual sounds or
smells coming from it – unplug it immediately and contact an authorized dealer or service
center.
High temperature can cause problems. Don’t use your monitor in direct sunlight, and keep it
away from heaters, stoves, fireplaces, and other sources of heat.
12
13
14
Unplug the monitor when it is going to be left unused for an extended period of time.
Unplug your monitor from the AC outlet before any service.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
English
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Unpacking Your Monitor
Please make sure the following items are included with your monitor. If any items are
missing, contact your dealer.
Install driver
Manual
USB Diskette
Warranty Card
Monitor and Stand
(Not available in all locations)
Power Cord
BNC Cable
(Option)
USB Cable
Signal Cable
English
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your Monitor
Connecting Your Monitor
R
H/V
V
5
6
2
3
7
Figure 1. Cable connections
Turn off your computer and unplug its power cord.
1
2
3
Connect the signal cable to the D-SUB or BNC signal port on the back of your monitor.
If you are using an IBM-compatible computer, skip to step 5. If you are using a
Macintosh computer, connect the other end of the signal cable to a Macintosh
adapter. (Adapter not included)
Follow the instructions included with your adapter to set the pins on your adapter, if
necessary.
4
5
Connect the signal cable (with an adapter, if necessary) to the video port on the back
of your computer. This port might be directly attached to your computer, or it might be
part of a video adapter, video card, or graphics card.
Connect the power cord for your monitor to the power port on the back of the monitor.
6
7
8
Plug the power cords of your computer and your monitor into a nearby outlet.
Turn on your computer and monitor. If your monitor displays an image, installation is
complete.
English
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your Monitor
Plug and Play
®
Our adoption of the new VESA Plug and Play solution eliminates complicated and time
consuming setup. It allows you to install your monitor in a Plug and Play compatible system
without the usual hassles and confusion. Your PC system can easily identify and configure
itself for use with your display. This monitor automatically tells the PC system its Extended
Display Identification (EDID) data using Display Data Channel (DDC) protocols so the PC
system can automatically configure itself to use the flat panel display. If your PC system
needs a video driver, following the instructions given below according to the operating
system your computer uses.
Installing the Video Driver
When prompted by the operating system for the monitor driver, insert the Driver diskette
included with this monitor. Driver installation is slightly different from one operating system
to another. Follow the directions as appropriate for the operating system you have.
Windows® 98
®
Windows 98 will auto-detect your new monitor and start the “Add New Hardware
1
Wizard” if the drivers are not already installed. Click the NEXT button to search for
drivers.
Check the diskette drive box to install the drivers off the diskette provided with your
monitor and click NEXT.
2
Confirm that Windows found the driver on the diskette and click NEXT again to install
the driver.
3
To manually install or update the driver, follow the directions below:
Click on START, SETTINGS, CONTROL PANEL, DISPLAY SETTINGS tab,
1
ADVANCED, MONITOR tab, CHANGE. This will start the “Add New Hardware
Wizard”.
Follow the same directions as given in the steps in the section above.
2
English
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your Monitor
Windows® 95
®
To determine the version of Windows 95 that your computer uses, right click on the My
Computer icon on the Windows desktop and select Properties. The version number can be
seen on the General section under “System”. Follow the directions given below according to
®
the version of your Windows 95 operating system:
Version 4.00.950A
Click on START, SETTINGS, CONTROL PANEL, DISPLAY SETTINGS tab,
CHANGE DISPLAY TYPE, CHANGE, HAVE DISK.
1
Type the diskette drive letter in the box and click OK.
2
Version 4.00.950B
Click on START, SETTINGS, CONTROL PANEL, DISPLAY, ADVANCED
PROPERTIES, MONITOR tab, HAVE DISK.
1
Type the diskette letter in the box and click OK.
2
Self-Test Feature Check (STFC)
Your monitor provides a self test feature that allows you to check whether your monitor is
functioning properly. If your monitor and computer are properly connected but the monitor
screen remains dark and the power indicator is blinking, run the monitor self-test by
performing the following steps:
Turn off both your computer and the monitor.
1
Unplug the video cable from the back of the computer.
2
Turn on the monitor.
3
If the monitor is functioning properly, you will see a white box with a red border and black
text inside as shown in the following illustration:
English
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Your Monitor
No Connection
C h e c k S i g n a l C a b l e
Figure 2. Monitor self test screen
The three boxes inside the border are red, green and blue. Failure of any of the boxes to
appear indicates a problem with your monitor. This box also appears during normal operation
if the video cable becomes disconnected or damaged.
Turn off your monitor and reconnect the video cable; then turn on both your computer
and the monitor.
4
If your monitor screen remains blank after using the previous procedure, check your video
controller and computer system; your monitor is functioning properly.
Getting Help
If your monitor does not display an image, check your cable connections and refer to
Troubleshooting on page 25.
Warm-up Time
All monitors need time to become thermally stable the first time you turn them on each day.
Therefore, to achieve more accurate adjustments for parameters, allow the monitor to warm
(be on) for at least 30 minutes before making any screen adjustments.
English
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your Monitor
User Controls
Your Samsung SyncMaster computer monitor allows you to easily adjust the characteristics
of the image being displayed. All of these adjustments are made using the control buttons on
the front of the monitor. These buttons operate the On Screen Display, which shows you the
monitor’s settings and allows you to change those settings.
i
8
1
2
4
5
6
7
3
Figure 3. User control locations
Information (
) button
i
1
Use this button to show the horizontal and vertical frequencies and the resolution
received from your computer or video board.
EXIT (
) button
2
3
Use this button to Exit the active menu or the OSD.
,
,
,
buttons
These buttons allow you to highlight and adjust items in the menu. These buttons are
also direct access buttons for the contrast and brightness feature. All menus
automatically save your adjustments 3 seconds after you stop adjusting the setting.
MENU (
) button
4
5
6
Use this button to open the OSD and activate a highlighted menu item.
Auto size ( ) button
Activates the auto size adjusting function.
Power indicator
This light glows green during normal operation, and grows amber when you are
making adjustments.
Power button
Use this button to turn the monitor on and off.
7
8
USB connector
Connect the USB cable for your monitor to the USB connector on the front of the
monitor.
English
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your Monitor
Automatic Save
Whenever you open the on screen display and allow an adjustment window to remain active
for about 3 seconds without pressing another button, the monitor automatically saves any
adjustments you have made. These changes are saved into a user area in the monitor. User
areas are reserved according to the signal frequency from your computer. The monitor can
save adjustments for up to 10 user modes. It has 8 factory preset or preload modes, one for
each signal frequency as listed in Display Modes on page 28.
If you have made no adjustments, the on-screen menu disappears and the monitor does not
save anything. To exit without saving the changes you have made, press the EXIT (
)
button before the 3 seconds elapse.
Direct-Access Feature
The feature described on this page and the next page can be accessed quickly, at the touch
of one button. When you finish making adjustments to a feature, push the EXIT (
) button
to turn off the menu or allow the OSD to time out and disappear automatically
Information
The Information on this screen shows available
horizontal and vertical frequencies and display
resolution.
Information
Frequency Range:
H: 30 - 121kHz
V: 50 - 185Hz
With the menu off, push the
button
i
Recommended Timing:
1600x1200 / 85Hz
Serial Number:
1
once to see information about your monitor.
The current Horizontal/Vertical frequencies
received from the computer or video board is
displayed along the bottom.
37k/70 640x350
Push the
button once more to see the
i
2
3
user defined timing mode.
Scroll down with the button to display the
factory preset timings.
Note: These screens do not allow any changes to
the settings; they are for information only.
English
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your Monitor
Menu Features
The following features can all be accessed using your monitor’s on screen display system.
Follow the instructions below to adjust the features.
Once you are finished making adjustments to a feature, push the EXIT button to return to
then push EXIT again to turn off the menu.
Position
Follow these instructions to change the position of
the monitor’s entire display.
RGB
Position/Size
Position
Size
Zoom
Recall
With the menu off, push the
Push the button or button until the
“Position / Size” screen is displayed.
button.
1
:
Access Function
Push the button or button to select
2
3
4
Position.
Position
Push the
button to open the Position
adjustment screen.
2
8
Use the and buttons to change the
vertical position of the monitor’s viewing
area; use the and buttons to change
the horizontal position of the monitor’s
viewing area.
:
Previous Menu
Size
Follow these instructions to change the size of the
monitor’s entire display.
RGB
Position/Size
Position
Size
Zoom
Recall
With the menu off, push the
Push the button or button until the
“Position / Size” screen is displayed.
button.
1
:
Access Function
Push the button or button to select
2
3
4
Size.
Size
Push the
button to open the Size
adjustment screen.
3
Use the and buttons to change the
vertical size of the monitor’s viewing area;
use the and buttons to change the
horizontal size of the monitor’s viewing area.
33
:
Previous Menu
English 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your Monitor
Zoom
Follow these instructions to get a close-up or a
longshot view of the monitor’s viewing area.
RGB
Position/Size
Position
Size
Zoom
Recall
With the menu off, push the
Push the button or button until the
“Position / Size” screen is displayed.
button.
1
:
Access Function
Push the button or button to select
2
3
4
Zoom.
Zoom
Push the
button to open the Zoom
adjustment screen.
Use the button to decrease the screen
viewing area. Use the button to enlarge
the screen viewing area.
:
Previous Menu
Recall
Use the recall feature to reset these monitor
settings to their original level: Position, Size and
Zoom only.
RGB
Position/Size
Position
Size
With the menu off, push the
button.
Zoom
Recall
1
Push the button or button until the
"Position / Size" screen is displayed.
Access Function
:
Push the button or button to select
Position/Size
2
3
4
Recall.
Push the
button to open the Recall
YES NO
adjustment screen.
Use the button or button to adjust the
recall setting.
:
Previous Menu
English 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your Monitor
Pincushion/Trapezoid
Adjust the pincushion setting when the sides of
the display are bowed in or bowed out; adjust the
trapezoid setting when the top or bottom of the
display is too large or small.
RGB
Geometry
/
Pincushion
Trapezoid
Parallel/Rotation
Pinbalance/Linearity
Side Pin Corner
PinBalance Corner
Recall
With the menu off, push the
button.
1
Push the button or button until the
“Geometry” screen is displayed.
:
Access Function
Pincushion/Trapezoid
Push the button or button to select
2
3
4
Pincushion/Trapezoid.
21
35
Push the
button to open the
Pincushion/Trapezoid adjustment screen.
:
Previous Menu
Use the button or button to adjust the
pincushion setting; use the button
or button to adjust the trapezoid setting.
Parallel/Rotation
Adjust the parallelogram setting when the display
is leaning left or right; adjust the Rotation setting
when the entire display is tilted left or right.
RGB
Geometry
Pincushion/Trapezoid
Parallel/Rotation
Pinbalance/Linearity
Side Pin Corner
PinBalance Corner
Recall
With the menu off, push the
button.
1
Push the button or button until the
“Geometry” screen is displayed.
:
Access Function
Push the button or button to select
Parallel/Rotation
2
3
4
Parallel/Rotation.
2
Push the
button to open the Parallel/
Rotation adjustment screen.
17
Use the button or button to adjust the
Parallel setting; use the button or
button to adjust the Rotation setting.
:
Previous Menu
English 12
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your Monitor
Pinbalance/Linearity
Adjust the pinbalance setting when the sides of the
RGB
Geometry
/
display are bowed towards the left or right. Adjust
the linearity setting when the display image is
compressed at the left, right or top, bottom.
Pincushion
Trapezoid
Parallel/Rotation
Pinbalance/Linearity
Side Pin Corner
PinBalance Corner
Recall
With the menu off, push the
Push the button or button until the
“Geometry” screen is displayed.
button.
1
:
Access Function
Pinbalance/Linearity
Push the button or button to select
2
3
4
Pinbalance/Linearity.
44
53
Push the
button to open the
Pinbalance/Linearity adjustment screen.
:
Previous Menu
Use the button or button to adjust the
pinbalance setting; use the button or
button to adjust the linearity setting.
Side Pin Corner
Adjust the side pin corner correction when the
sides of the display are bowed in or bowed out;
adjust the side pin corner correction when the top
or bottom of the display is too large or small.
RGB
Geometry
Pincushion/Trapezoid
Parallel/Rotation
Pinbalance/Linearity
Side Pin Corner
PinBalance Corner
Recall
With the menu off, push the
Push the button or button until the
“Geometry” screen is displayed.
button.
1
:
Access Function
Side Pin Corner
Push the button or button to select
2
3
4
Side Pin Corner.
3
Push the
button to open the Side Pin
15
Corner adjustment screen.
:
Previous Menu
Use the button to adjust the Side Pin Corner
correction; use the
/
or
/
buttons to adjust the Side Pin Corner
correction.
English 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your Monitor
PinBalance Corner
Adjust the Pinbalance Corner correction when the
RGB
Geometry
/
sides of the display are bowed in or bowed out;
adjust the side pinbalance corner correction when
the top or bottom of the display is too large or
small.
Pincushion
Trapezoid
Parallel/Rotation
Pinbalance/Linearity
Side Pin Corner
PinBalance Corner
Recall
With the menu off, push the
Push the button or button until the
“Geometry” screen is displayed.
button.
:
Access Function
1
PinBalance Corner
Push the button or button to select
3
2
3
4
PinBalance Corner.
15
Push the
button to open the Pin
Balance Corner adjustment screen.
:
Previous Menu
Use the or buttons to adjust
/
/
the Pinbalance Corner correction.
Recall
RGB
Use the recall feature to reset the Geometry
settings to their original level.
Geometry
Pincushion/Trapezoid
Parallel/Rotation
Pinbalance/Linearity
Side Pin Corner
PinBalance Corner
Recall
With the menu off, push the
button.
1
Push the button or button until the
“Geometry” screen is displayed.
:
Access Function
Push the button or button to select
2
3
4
Recall.
Geometry
YES NO
Push the
button to open the Recall
adjustment screen.
Use the button or button to adjust the
Recall setting.
:
Previous Menu
English 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your Monitor
Color
Color temperature is a measure of the “warmth” of
the image colors. The available range is between
RGB
Color
5000 to 9300. Follow these steps to change the color
temperature and adjust individual R, G, B color
control.
Color1
Color2
Color3
Recall
With the menu off, push the
button.
:
Access Function
1
Push the button or button until the
“Color” screen is displayed.
Color1
Use the button or button to select
9300 9300K 5000
2
3
4
Color 1, Color 2, or Color 3.
R
0
0
0
Push the
button to open the “Color 1”,
G
B
:
“Color 2”, or “Color 3” adjustment screen.
The current color temperature is shown
highlighted between 9300 and 5000. Use
the button or button to adjust the color
temperature.
Previous Menu
Color 2
9300 9300K 5000
Adjust the color temperature as close to the
desired temperature as possible using only
the and buttons. To fine tune the color
5
R
0
0
0
G
B
:
hue, use the
or button to select R(ed),
G(reen), or B(lue), then use the and
Previous Menu
Color 3
buttons until you reach the desired color.
Note: Recall does not reset the color settings.
9300 9300K 5000
R
0
0
0
G
B
:
Previous Menu
Recall
Use the recall feature to reset the color settings to
their original level.
Color
With the menu off, push the
button.
1
Push the button or button until the
“Color” screen is displayed.
YES NO
Push the button or button to select
2
3
4
:
Previous Menu
Recall.
Push the
button to open the Recall
adjustment screen.
Use the button or button to select the
Recall setting.
English 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your Monitor
Clear Moire
A “moiré” pattern can appear on your screen,
looking like a series of concentric circles or arcs. To
eliminate this pattern, use the Clear Moire
adjustments.
RGB
Screen
Clear Moire
Focus
Purity
Convergence
Sharpness
Recall
F
With the menu off, push the
button.
1
Push the button or button until the
“Screen” OSD is displayed.
:
Access Function
Clear Moire
Push the button or button to select
2
3
4
Clear Moire.
Push the
button to open the Clear
70
Moire adjustment screen.
Use the button or button to adjust
horizontal moiré; use the button
or button to adjust vertical moiré.
:
Previous Menu
Focus
Use the focus control when the image displayed on
the screen is not sharp in all areas.
RGB
Screen
Clear Moire
Focus
Purity
Convergence
Sharpness
Recall
F
With the menu off, push the
button.
1
Push the button or button until the
“Screen” OSD is displayed.
Access Function
:
Push the button or button to select
2
3
4
Focus.
Focus
Push the
button to open the Focus
adjustment screen.
2
Fv
Fh
Fh
Fv
Use the button or button to adjust the
focus along the left and right areas of the
screen. Use the button or button to
adjust the center area of the screen.
17
:
Previous Menu
English 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your Monitor
Purity
Adjusts the color purity of the overall image.
RGB
Screen
With the menu off, push the
Push the button or button until the
“Screen” OSD is displayed.
button.
Clear Moire
Focus
Purity
Convergence
Sharpness
Recall
1
F
Push the button or button to select
Purity.
2
3
4
Access Function
:
Purity
Push the
button to access the purity
adjustment screen.
0
0
0
0
Use the button or button to select the
adjustment area, and the button
or button to perform the adjustment.
:
Previous Menu
Convergence
Convergence affects picture clarity. Adjust the
horizontal or vertical convergence to properly align
the color dots that make up the image.
RGB
Screen
Clear Moire
Focus
Purity
Convergence
Sharpness
Recall
F
With the menu off, push the
button.
1
Push the button or button until the
“Screen” OSD is displayed.
:
Access Function
Push the button or button to select
2
3
4
5
Convergence
Convergence.
Static
Top
Bottom
Push the
button to open the
convergence adjustment screen.
Push the button or button to select
static, top or bottom.
:
:
Previous Menu
Static
Use the
button or button to adjust the
horizontal convergence; use the
or button to adjust the vertical
convergence.(Static, Top or Bottom.)
button
50
50
Previous Menu
English 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your Monitor
Sharpness
Adjusts the sharpness of the overall image.
RGB
Screen
Clear Moire
With the menu off, push the
Push the button or button until the
“screen” is displayed.
button.
Focus
Purity
F
1
Convergence
Sharpness
Recall
Push the button or button to select
Access Function
:
2
3
Sharpness.
Sharpness
Use the button or button to adjust
Nomal or Text.
Normal Text
:
Previous Menu
Recall
Use the recall feature to reset Screen settings to
their original level.
RGB
Screen
Clear Moire
Focus
Purity
Convergence
Sharpness
Recall
F
With the menu off, push the
button.
1
Push the button or button until the
screen is displayed.
:
Access Function
Push the button or button to select
2
3
4
Recall.
Screen
Push the
button to open the Recall
adjustment screen.
YES NO
Use the button or button to adjust the
recall setting.
:
Previous Menu
English 18
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your Monitor
Degauss
Use the recall feature to reset Advenced settings to
their original level.
RGB
Advanced
Degauss
Reset
+++
G
With the menu off, push the
button.
Push the button or button until the
“Advanced” screen is displayed.
Sync. Input Type
Video Input Level
D-SUB/BNC
USB
1
Access Function
:
Push the button or button to select
Degauss.
2
3
Degauss
Push the
button to execute the degauss
function. The degaussing screen will appear.
Degaussing...
NOTE: The monitor may buzz momentarily, the image
colors may change and the image will jiggle
for a few seconds. These effects are normal.
:
Previous Menu
After a few seconds, the degauss main menu
will return.
4
Reset
Use the recall feature to reset these monitor
settings to their original levels: Position, Size,
Pincushion, Trapezoid, Parallelogram, Pinbalance,
Rotation, and Clear Moiré.
RGB
Advanced
Degauss
Reset
Sync. Input Type
Video Input Level
D-SUB/BNC
USB
+++
G
With the menu off, push the
Push the button or button until the
“Advanced” screen is displayed.
button.
1
Access Function
:
Reset
Push the button or button to select
2
3
4
Reset.
YES NO
Push the
button to open the recall
selection screen.
:
Previous Menu
Push the button to select YES. If you
don’t want to reset the monitor, use the
button to select NO.
NOTE: If you have selected “YES”, all settings listed
above will be reset. All other settings will
remain the same.
CAUTION: This operation resets all of the data in
the user memory area for the current
timing sigal.
English 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your Monitor
Sync. Input Type
Use this menu to set your monitor to the corrent
type of synchronization. Select “Separate” if the
computer is sending a separate synchronization
signal. Select “Sync. on Green” if the computer
expects the monitor to synchronize with the green
signal it sends. Refer to your computer or video
card user’s manual to determine the correct setting.
RGB
Advanced
Degauss
Reset
Sync. Input Type
Video Input Level
D-SUB/BNC
USB
+++
G
:
Access Function
Sync.Input Type
With the menu off, push the
Push the button or button until the
“Advanced” screen is displayed.
button.
1
Separate
Sync. on Green
Push the button or button to select
2
3
4
Sync. Input Type.
:
Previous Menu
Push the
button to open the sync input
type selection screen.
Use the button or button to select
Separate or Sync. on Green.
Video Input Level
Some video cards use video signals higher than 1.0 V
which causes the display to be very bright. For those
video cards, use this feature to select the 1.0 V Level.
RGB
Advanced
Degauss
Reset
Sync. Input Type
Video Input Level
D-SUB/BNC
USB
+++
G
With the menu off, push the
button.
1
Push the button or button until the
“Advanced” screen is displayed.
Access Function
:
Push the button or button to select
2
3
4
Video Input Level
Video Input Level.
Push the
button to open the video input
0.7 V
1.0 V
level selection screen.
Use the or buttons to select 0.7 V or
1.0 V.
:
Previous Menu
English 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your Monitor
D-SUB/BNC
Use this menu to choose between the signal source
RGB
Advanced
Degauss
Reset
Sync. Input Type
Video Input Level
D-SUB/BNC
USB
connected to the BNC connector input and the
signal source connected to the D-SUB connector
input.
+++
G
With the menu off, push the
Push the button or button until the
“Advanced” screen is displayed.
button.
1
:
Access Function
D-SUB/BNC
Push the button or button to select
2
3
4
D-SUB/BNC.
Push the
button to open the D-SUB/
D-SUB
BNC
BNC selection screen.
Previous Menu
Use the button or button to select
D-SUB or BNC.
:
NOTE: When you are finished, wait for a few
seconds and the screen will blank then
display the image from the new signal
source (Other computer). A cable must be
connected to both inputs to use this
function.
USB
Use this menu to choose between the up stream
ports A or B.
RGB
Advanced
Degauss
Reset
+++
G
With the menu off, push the
Push the button or button until the
“Advanced” screen is displayed.
button.
Sync. Input Type
Video Input Level
D-SUB/BNC
USB
1
:
Access Function
Push the button or button to select
USB.
2
3
4
USB
Push the
button to open the USB
selection screen.
A
B
Use the button or button to select
A or B.
:
Previous Menu
English 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your Monitor
Menu Position
You can change the position where the OSD menu
appears on your monitor.
RGB
Menu
With the menu off, push the
button.
Push the button or button until the
“Menu” screen is displayed.
Menu Position
Menu Duration
Languages
1
Access Function
Menu Position
:
Push the button or button to select
2
3
4
Menu Position.
Push the
button to open the menu
position adjustment screen.
0
Use the or buttons to place
,
,
60
the menu in the position you prefer.
:
Previous Menu
Menu Duration
The menu will automatically turn off if no
adjustments are made for a certain time period. You
can set the amount of time the menu will wait
before it turns off.
RGB
Menu
Menu Position
Menu Duration
Languages
With the menu off, push the
Push the button or button until the
“Menu” screen is displayed.
button.
1
:
Access Function
Menu Duration
Push the button or button to select
2
3
4
Menu Duration.
3
7
10 20 50
Push the
button to open the menu
duration selection screen.
(Seconds)
Previous Menu
:
Use the or buttons to select 3, 7, 10,
20, or 50 seconds. 10 seconds is the default
value.
English 22
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your Monitor
Languages
Follow these steps to change the language used in
RGB
Menu
the menu. The language chosen affects only the
language of the OSD. It has no effect on any
software running on the computer.
Menu Position
Menu Duration
Languages
With the menu off, push the
Push the button or button until the
“Menu” screen is displayed.
button.
1
Access Function
Languages
:
Push the button or button to select
2
3
4
Languages.
Deutsch
English
Push the
button to open the language
selection screen.
:
Previous Menu
Use the button or button to select the
language you would like to use. You can
choose one of nine languages (English,
Korean, Russian, Swedish, Portuguese,
Italian, French, Spanish, or German).
AutoSize
Autosize
With the menu off, push the
button.
Push the button to adjust the size automatically
and the
button to cancel.
YES NO
:
Exit
English 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
PowerSaver
This monitor has a built-in power management system called PowerSaver. This power
management system saves energy by switching your monitor into a low-power mode when it
has not been used for a certain amount of time.
This power management system operates with a VESA DPMS compliant video card installed
in your computer. You use a software utility installed on your computer to set up this feature.
See the table below for details.
Table 1. Power-saving modes
Power-Saving Function
Normal
Operation
mode
State
Power-off Mode
Horizontal Sync
Vertical Sync
Video
Active
Active
Active
Inactive
Inactive
Blanked
Power Indicator
Green
Green Blinking (1 sec interval)
Power
Consumption
150 W (Max.)
145 W (Nom.)
Less than 3W
NOTE: This monitor automatically returns to normal operation when horizontal and vertical
sync return. This occurs when you move the computer’s mouse or press a key on the
keyboard.
®
This monitor is EPA ENERGY STAR compliant and NUTEK compliant when used with a
computer equipped with VESA DPMS functionality.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods.
English 24
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
Before calling for service, check the information in this section to see if you can remedy any
problems yourself.
If you do need assistance, please call the phone number on the warranty card, the phone
number on the back cover of this manual, or contact your dealer.
Table 2. Troubleshooting problems
Symptom
Corrective Actions
There is no screen image
• Check to see that both the monitor and the
computer are plugged in and turned on.
“No Connection,
Check Signal Cable” appears
• Check the signal cable connections between the
computer and the monitor.
“Sync. Out of Range” appears
• Check the maximum resolution and the
frequency on the video port of your computer.
• Compare these values with the data in the
Display Modes Timing chart, on page 28.
The image is too light or too dark
The image is too large or too small
• Adjust the Brightness or Contrast settings.
• Adjust the Size settings.
The colors are distorted with dark or
shadowed areas
• Activate the Degauss feature.
The power indicator is amber blinking or
amber blinking
• The monitor is using its power management
system. Check the power management utility on
your computer
You need the monitor driver software
• You can download the driver from the internet at
English 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Specifications
Table 3. Specifications
Picture Tube
55cm (22") Full square type [50.8 cm (20”) Viewable]
Flat face, 90° Deflection
Dot pitch : 0.24mm
Multi-Layer treatment with anti-electrostatic properties
Medium-short persistence phosphor
Synchronization
Display Colors
Horizontal :
30 kHz to 121 kHz (Automatic)
50 Hz to 185 Hz (Automatic)
Vertical :
Unlimited Colors
Maximum Resolu- Horizontal :
2048 Dots
1536 Lines
tion
Vertical :
Active Display
Horizontal : 395.0 3 mm (15.55" 0.12”)
Vertical : 296.0 3 mm (11.65" 0.12”)
(Active display size is dependent upon signal timing and image size
selection.)
Input Signal,
Terminated
Video signal : Analog video 0.7 Vpp positive at 75 W
Separate sync.: TTL Level, positive or negative
Composite sync.: TTL Level, positive or negative
Sync-on-green : Composite sync 0.3 Vpp negative
(Video 0.7 Vpp positive)
Maximum Pixel
Clock
340 MHz
Power Supply
AC 100-240 V 10%, 60 Hz/50 Hz 3 Hz
Power Consump- 160 W (Maximum)
tion
Dimensions/
Weight
(W x D x H)
Unit :
500 x 476 x 510 mm ; 31.5 kg
19.7x 18.7x 20.1 inch ; 69.4 Ibs
Carton : 634 x 625 x 642 mm ; 36.5 kg
25.0 x 24.6 x 25.3 inch ; 80.5 Ibs
(All measurements approximate)
Environmental
Considerations
Operating Temperature: 32 F to 104 F (20 C to 40 C)
Humidity: 110% to 80%
Storage Temperature: -4 F to 113 F (20 C to 45 C)
Humidity: 15% to 95%
NOTE: Design and specifications are subject to change without prior notice.
English 26
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Pin Assignments
Table 4. 15-Pin D-SUB connector
Sync.
Type
15-Pin Side of the Signal Cable
(Figure 1)
Cable Adapter
(Figure 2)
Pin No.
Separate
Composite
Sync on Green
Apple MacII
1
2
3
4
5
6
7
8
9
Red
Green
Blue
Red
Green
Blue
Red
Green+Sync.
Blue
GND
DDC Return
GND-R
GND-G
GND-B
Reserved
GND-R
Red
H/V Sync.
Sense 0
Green
GND-G
Sense 1
Reserved
Blue
GND
GND
DDC Return
GND-R
GND-G
GND-B
Reserved
DDC Return
GND-R
GND-G
GND-B
Reserved
10
GND-Sync./Self- GND-Sync./Self- GND-Sync./Self-
Sense 2
Raster
GND
DDC Data
H-Sync.
V-Sync.
DDC Clock
Raster
GND
DDC Data
H-Sync.
Not Used
DDC Clock
Raster
GND
DDC Data
Not Used
Not Used
DDC Clock
11
12
13
14
15
GND
V-Sync.
GND-B
GND
H-Sync.
Figure 1: Male Type
Figure 2: Male Type
1
2
3
4
5
1
2
3
4
5
6
7
8
6
7
8
10
X
9
10 11 12 13 14 15
11 12 13 14 15
English 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Table 5. BNC Connectors
Signals
Pin Assignment
Sync-On-Green
Composite Sync.
Separate Sync.
Red
R
Red
Green+Sync.
Blue
Red
Green+Sync.
Blue
G
Green
B
Blue
H/V
NC
H/V Comp. Sync.
NC
H-Sync.
V-Sync.
V
NC
NC = No Connection
G
B
V
R
H/V
Display Modes
For the display modes listed below, the screen image has been optimized during manufacture.
Table 6. Preset timing modes
Vertical
Frequency
(Hz)
Horizontal
Frequency
(kHz)
Pixel Clock Sync Polarity
Display Mode
(MHz)
(H/V)
IBM, VGA2, 720 x 400
IBM, VGA3, 640 x 480
VESA, 800 x 600
31.469
31.469
53.674
68.677
67.500
91.146
106.250
112.73
70.087
59.940
85.061
84.997
75.000
85.024
85.000
75.000
28.322
25.175
56.250
94.500
108.00
157.500
229.500
297.59
–/+
–/–
+/+
+/+
+/+
+/+
+/+
–/+
VESA, 1024 x 768
VESA, 1152 x 864
VESA, 1280 x 1024
VESA, 1600 x 1200
VESA, 1920 x 1440
English 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
P
Advanced,19
Automatic Save,9
Autosize button,8
Paralle,12
Pinbalance,13
Pinbalance Corner,14
Pincushion,12
B
Position,10
BNC,21
Position/Size,10
Power button,8
Power indicator,8
Power-off Mode,24
Power-saving modes,24
Preset timing modes,28
Purity,17
Brightness,8
C
CAUTION,2
Convergence,17
Clear moiré,16
Color,15
Contrast,8
D
R
Recall,18
Reset,19
Rotation,12
Degauss,19
D-SUB,21
E
EXIT (
S
) button,8
Screen,16
Shasrpness,18
Side Pin Corner,13
Size,10
F
Focus,16
G
Geometry,12
I
Sync. input type,20
T
Trapezoid,12
Information,9
Troubleshooting,25
Information (
) button,8
i
U
USB,21
L
Languages,23
USB Cable,3
USB connector,8
User Controls,8
Linearity,13
M
MENU (
) button,8
V
Menu duration,22
Video input level,20
Z
Zoom,11
Menu position,22
N
No Connection, Check Signal Cable,25
English 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Information
device must accept any interference received, including
FCC Information
interference that may cause undesired operation.
The party responsible for product compliance:
SAMSUNG ELECTRONICS CO., LTD
America QA Lab of Samsung
85 West Tasman Drive
User Instructions
The Federal Communications Commission Radio
Frequency Interference Statement includes the following
warning:
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio
or television receptions, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
San Jose, CA 95134 USA
Tel) 408-544-5124
Fax) 408-544-5191
Provided with this monitor is a detachable power supply
cord with IEC320 style terminations. It may be suitable for
connectiontoanyULListedpersonalcomputerwithsimilar
configuration. Before making the connection, make sure
the voltage rating of the computer convenience outlet is
the same as the monitor and that the ampere rating of the
computer convenience outlet is equal to or exceeds the
monitor voltage rating.
For 120 Volt applications, use only UL Listed detachable
power cord with NEMA configuration 5-15P type (parallel
blades) plug cap. For 240 Volt applications use only UL
Listed Detachable power supply cord with NEMA
configuration 6-15P type (tandem blades) plug cap.
n Reorient or relocate the receiving antenna.
n Increase the separation between the equipment and
receiver.
IC Compliance Notice
This Class B digital apparatus meets all requirements of
theCanadianInterference-CausingEquipmentRegulations
of ICES-003.
n Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
n Consult the dealer or an experienced radio/TV
technician for help.
User Information
Cet appareil Numérique de classe B respecte toutes les
exigences du Règlemont ICES-003 sur les équipements
produisant des interférences au Canada.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
If necessary, consult your dealer or an experienced radio/
television technician for additional suggestions. You may
find the booklet called How to Identify and Resolve Radio/
TV Interference Problems helpful. This booklet was
prepared by the Federal Communications Commission. It is
available from the U.S. Government Printing Office,
Washington, DC 20402, Stock Number 004-000-00345-4.
MPR II Compliance
This monitor complies with SWEDAC(MPR II)
recommendations for reduced electric and magnetic fields.
European Notice
Products with the CE Marking comply with both the EMC
Directive (89/336/EEC), (92/31/EEC), (93/68/EEC) and the
Low Voltage Directive (73/23/EEC) issued by the
Commission of the European Community.
Warning
User must use shielded signal interface cables to maintain
FCC compliance for the product.
Compliance with these directives implies conformity to the
following European Norms:
n EN55022:1998 – Radio Frequency Interference
n EN55024:1998 – Electromagnetic Immunity
Declaration of conformity for products
Marked with FCC Logo
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this
n
EN61000-3-2:1995 + A1 + A2 – Power Line Harmonics
n EN61000-3-3:1995 – Voltage Fluctuations
n EN60950 – Product Safety.
Download from Www.Somanuals.com. All Manuals Search And Download.
U.S.A. :
Samsung Electronics America (SEA)
One Samsung Place
Ledgewood, NJ 07852
Tel. : 1-800-SAMSUNG (1-800-726-7864)
ESPAÑA :
Samsung Electrónics Comercial Ibérica, S.A.
Ciencies, 55-65 (Polígono Pedrosa) 08908
Hospitalet de Llobregat (Barcelona)
Tel. : (93) 261 67 00
Fax. : (93) 261 67 50
CANADA :
Samsung Electronics Canada Inc.
7037 Financial Drive
Mississauga, Ontario L5N 6R3
Tel. : 1-800-SAMSUNG (1-800-726-7864)
Fax. : (905) 542-1199
UK :
Samsung Electronics (UK) Ltd.
Samsung House, 225 Hook Rise South
Surbiton, Surrey KT6 7LD
Tel. : (0181) 391 0168
Fax. : (0181) 397 9949
GERMANY :
<European Service Center & National Service>
Stafford Park 12 Telford, Shropshire, TF3 3BJ
Tel. : (01952) 292 262
Samsung Electronics GmbH
Samsung-Haus, Am Kronberger Hang 6
65824 Schwalbach/Ts.
Fax. : (01952) 292 033
Tel. 49 (0180) 5121213
*
Fax. 49 (0180) 5121214
*
THAILAND :
Samsung Service Center
729-729/1 JSP Tower Rachadapisek RD.,
Bangpongpang, Yannawa, Bangkok 10120
Tel : (662) 2954508-14
DM 0,24/Min.
*
AUSTRALIA :
Samsung Electronics Australia Pty Ltd.
Unit G, 10-16 South Street,
Rydalmere, N.S.W. 2116
P.O. BOX 368
Fax : (662) 2954267
SOUTH AFRICA :
Tel. : (02) 638-5200
Samsung Electronics South Africa
Somerset Office Park 5 Libertas Road
Bryanston, South Africa
ITALIA :
Samsung Electronics Italia SpA
Via C. Donat Cattin,
5-20063 Cernusco sul Naviglio (Mi)
Tel. : 167-010740
Tel : (27)-11-463-5678
Fax : (27)-11-463-5215
BRASIL :
PANAMA :
Samsung Eletrônica da Amazonia Ltda.
R. Prof. Manoelito de Ornellas, 303-2º Andar
Chácara Sto. Antônio • cep : 04719-040
São Paulo • SP
Servicios Samsung (Zona Libre), S.A.
50 and 61 Streets Sta, Cecilia
Bdl. Don Camilo, Panama City
Tel. : (507) 264-0195 or 269-5571
Fax : (507) 269-5568
Tel. : (011) 541-8500
Fax : (011) 523-3995, 522-0726
MEXICO
SWEDEN:
Samsung Electronics Mexico S.A. de C.V.
Saturno 44 Col. Nva. Industrial Vallejo
Del. Gustavo A. Madero C.P. 07700
Samsung Electronics Svenska, AB
Box 713, S-194 27 Upplands Vasby
Tel.: (468) 590-966-00
Fax : (468) 590-966-50
Mexico D.F.
Tel. 5747-5100
RFC: SEM950215S98
IMPORTADO POR:SAMSUNG ELECTRONICS MEXICO S.A. DE C.V.
SATURNO 44 COL. NVA. INDUSTRIAL VALLEJO
DEL. GUSTAVO A. MADERO C.P. 07700
“As an ENERGYSTAR® Partner, SAMSUNG has
determined that this product meets the
ENERGYSTAR® guidelines for energy efficiency.”
MEXICO D.F.
TEL. 5747-5100
RFC: SEM950215S98
EXPORTADO POR: SAMSUNG ELECTRONICS CO.,LTD.
JOONG-ANG DAILY NEWS BLDG.
P/N: BH68-00359E-00
7 SOON-WHA-DONG CHUNG-KU,
C.P.O BOX 2775, 1144 SEOUL, KOREA
Printed on recyclable paper
Download from Www.Somanuals.com. All Manuals Search And Download.
|