* Some of the contents of this manual may differ from your phone,
depending on the software installed or your service provider.
* Depending on your country, your phone and accessories may
appear different from the illustrations in this manual.
Printed in Korea
Code No.:GH68-06516A
English. 05/2005. Rev 1.2
World Wide Web
http://www.samsungmobile.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Use road safety at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Important
safety
Switch off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
precautions
Switch off the phone near all medical
equipment
Failure to comply with the following
precautions may be dangerous or illegal.
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Download from Www.Somanuals.com. All Manuals Search And Download.
Interference
Keep your phone away from small children
All wireless phones may be subject to interference,
which could affect their performance.
Keep the phone and all its parts, including accessories,
out of the reach of small children.
Be aware of special regulations
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories could
damage your phone and may be dangerous.
Water resistance
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Qualified service
Only qualified service personnel may repair your
phone.
Emergency calls
For more detailed safety information, see "Health and
safety information" on page 88.
Key in the emergency number for your present
location, then press
.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Camera and Camcorder
Use the camera module on your
phone to take a photo or record a
video.
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Special
features of your phone
Indicates that you need to pay careful
attention to the subsequent information
regarding safety or phone features.
•
MP3 Player
Play MP3 music files using your
phone as an MP3 player.
Indicates that you can get more information
on the referenced page.
ꢀ
→
Indicates that you need to press the
Navigation keys to scroll to the specified
option and then select it.
•
Bluetooth
Send photos, images, videos, and
other personal data, and connect
to other devices using free,
wireless Bluetooth technology.
[
]
Indicates a key on the phone. For example,
[
]
< >
Indicates a soft key, whose function is
displayed on the phone screen. For example,
<Menu>
2
Download from Www.Somanuals.com. All Manuals Search And Download.
•
E-mail
•
•
Get Personal with Photo Caller
ID
See who’s calling you when their
very own photo displays.
Send and receive e-mails with images, video, and
audio attachments.
•
Java
Name Card
Enjoy Java™-based embedded
Create name cards with your
number and profile. Whenever
introducing yourself to others, use
this convenient electronic name
card.
games and download new games.
•
Calendar
Keep track of your daily, weekly,
and monthly schedule.
•
WAP browser
Access the wireless web and access
various services and current
information.
•
Voice recorder
Record memos or sounds.
•
Multimedia Message Service (MMS)
Send and receive MMS messages with a
combination of text, images, video, and audio.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Use Phonebook .................................................... 17
Browse the web ................................................... 18
Send messages.................................................... 18
View messages .................................................... 20
Use Bluetooth...................................................... 21
Contents
Unpack
6
6
7
Make sure you have each item
Your phone
+Enter text
22
24
29
86
AB, T9, Numeric, and Symbol mode
Call functions
Buttons, features, and locations
Get started
Advanced calling features
Menu functions
First steps to operate your phone
Install and charge the phone ................................... 7
Power on or off...................................................... 8
Keys and display.................................................... 9
Access menu functions.......................................... 11
Customise your phone .......................................... 12
Make/Answer calls................................................ 14
All menu options listed
Solve problems
Help and personal needs
Health and safety information
88
94
Step outside the phone
14
Index
Begin with your camera, music, and other special features
Use camera......................................................... 14
Play MP3s ........................................................... 15
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of menu functions
To access Menu mode, press <Menu> in Idle mode.
1 Call records
ꢀ
p.29
3 Applications
ꢀ
p.35
5 Messages
ꢀ
p.45
8 Camera
9 Settings
ꢀ
p.66
p.73
1 Current contacts
2 Missed calls
3 Dialled calls
4 Received calls
5 Delete all
ꢀp.29
ꢀp.30
ꢀp.30
ꢀp.30
ꢀp.30
ꢀp.30
ꢀp.31
1 Java world
2 MP3 player
3 Voice recorder
4 World time
5 Alarm
6 PIM sync
7 Calculator
8 Converter
9 Timer
ꢀp.36
ꢀp.36
ꢀp.39
ꢀp.40
ꢀp.40
ꢀp.41
ꢀp.42
ꢀp.42
ꢀp.43
ꢀp.43
1 Create message
2 My messages
3 Templates
4 Delete all
5 Settings
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
p.45
p.48
p.54
p.54
p.55
p.59
ꢀ
1 Time & Date
ꢀp.73
ꢀp.74
ꢀp.75
ꢀp.76
ꢀp.77
ꢀp.80
ꢀp.83
ꢀp.84
ꢀp.85
2 Phone settings
3 Display settings
4 Sound settings
5 Network services
6 Bluetooth
7 Security
8 Connection settings
9 Reset settings
6 Call time
6 Memory status
7 Call cost*
6 File manager
ꢀ
p.59
2 Phonebook
ꢀp.31
Images
Videos
Music
Sounds
Other files
Memory status
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
p.59
p.60
p.60
p.61
p.62
p.62
1 Contacts list
2 Add new contact
3 Group
ꢀp.31
ꢀp.32
ꢀp.33
ꢀp.33
ꢀp.34
ꢀp.34
ꢀp.35
ꢀp.35
0 Stopwatch
4 Browser
ꢀp.43
4 Speed dial
1 Home
2 Bookmarks
3 http://
4 WAP profile
5 Clear cache
ꢀp.44
ꢀp.44
ꢀp.45
ꢀp.45
ꢀp.45
5 My name card
6 Own number
7 Management
8 Service number*
* Shows only if supported by your
SIM card.
7 Calendar
ꢀ
p.62
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Unpack
Your phone
Make sure you have each item
Buttons, features, and locations
Earpiece
Display
Phone
Travel Charger
Flash
Camcorder
microphone
Navigation keys
(Up/Down/Left/
Right)
Camera
Camera key
External
WAP access/
Confirm key
User’s Manual
Battery
display
Headset jack
MP3 player
control keys
Soft key (right)
Soft key (left)
Volume keys
Dial key
Power on/off/
Menu exit key
You can obtain various accessories from
your local Samsung dealer.
Correct key
Alphanumeric
keys
The items supplied with your phone
and the accessories at your Samsung
dealer may vary, depending on your
country or service provider.
Special
function keys
Microphone
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Get started
First steps to operate your phone
Install the battery.
Plug the travel charger
into the phone.
3
5
4
SIM card information
When you subscribe to a cellular network, you receive
a plug-in SIM (Subscriber Identity Module) card
loaded with your subscription details, such as your
PIN, and available optional services.
Install and charge the phone
Plug the charger into a standard AC wall outlet.
Remove the battery.
Insert the SIM card.
1
2
The LED on the charger indicates the charging
progress:
•
•
•
Red: the battery is being charged.
Green: the battery is completely charged.
Orange: the battery is not correctly plugged in
or is operating at a too high or too low
temperature.
If the phone is already
on, first turn it off by
Make sure that the gold-
coloured contacts on the
card face down into the
phone.
holding
[
].
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Get started
Power on or off
When the phone is completely charged (green
charger LED), unplug the charger from the power
outlet.
6
Switch on
1. Open the phone.
Remove the charger from the phone.
7
2. Press and hold [
the phone.
] to turn on
Do not turn on
the phone when
mobile phone
3. If necessary, enter the PIN and
use is prohibited.
press <OK>.
1. Open the phone.
Switch off
Low battery indicator
2. Press and hold [
].
When the battery is low:
•
•
•
a warning tone sounds,
the battery low message displays, and
the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Keys and display
Enter numbers, letters, and some special
characters.
In Idle mode, hold [1] down to access your
voice mail server.
Perform the function indicated on the
bottom line of the display.
In Idle mode, access your favourite menus
Enter special characters.
directly.ꢀp. 74
Hold [
]
down to activate or deactivate
In Menu mode, scroll through the menu
options.
Quiet mode.
Adjust the phone volume.
In Idle mode, launch the Wireless
Application Protocol (WAP) browser.
In Menu mode, select the highlighted menu
option.
In Idle mode, with the phone open, adjust
the keypad tone volume. With the phone
closed, hold down to turn on the backlight.
(on the left)
In Idle mode, hold down to turn on the
camera.
In Camera mode, take a photo or record a
video.
Delete characters from the display.
(on the right)
Send or answer a call.
In Idle mode, retrieve the recent numbers
dialled, missed, or received.
Hold down to launch or close the MP3 player.
Start playing music.
(on the front)
(on the front)
(on the front)
End a call.
Get back to the previous file during
playback.
Hold down to switch the phone on and off.
In Menu mode, cancel input and return the
phone to Idle mode.
Skip to the next file during playback.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Get started
Display
Layout
Icons
(continued)
New voice mail
Call diverting feature is active
Bluetooth feature is active
Connected to hands-free or headset
Synchronised with a PC
GPRS network
Icons
display various icons.
Text and graphics
display messages,
instructions, and
information you enter.
Roaming network
Soft key function
indicators
show the current functions
assigned to the two soft
keys.
Menu
Contacts
Home Zone, if you have registered
for the appropriate service
Call ringer set to vibrate
Icons*
Received signal strenth
Call in progress
Mute mode is active during a call
Quiet mode is active (Mute)
Quiet mode is active (Vibration)
Battery power level
Out of your service area; you cannot
send or receive calls
Alarm set
* The icons shown on the display may vary, depending
on your country or service provider.
New message
New e-mail message
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Access menu functions
Select an
option
1. Press the appropriate soft key.
Use the soft
keys
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
2. Press the Navigation keys to
move to the next or previous
option.
display indicates their current role.
3. Press <Select> or [ ] to
confirm the function displayed
or option highlighted.
Menu
Contacts
4. To exit, choose either of the
following methods.
•
Press <Back> to move up
one level.
•
Press [
mode.
] to return to Idle
Press the right soft
key to access
Contacts list in the
Phonebook menu.
Press the left soft
key to access
Menu mode.
Use shortcuts Press the number key
corresponding to the option you
want.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Get started
Customise your phone
You can set a wallpaper for the
main or external display.
Idle mode
wallpaper
1. In Idle mode, press <Menu
>
Display
1. In Idle mode, press <Menu
>
and select Settings
settings Language
2. Select a language.
→
Phone
language
and select Settings
→
Display
→
.
settings Wallpaper
→
→
Main
display or Cover display
.
2. Select an image category.
1. In Idle mode, press <Menu
>
Call ringer
melody
and select Settings
settings
Ringtone
→
Sound
3. Select an image and press
Select>.
→
Incoming call
→
<
.
4. Press <Save>.
2. Select a ringer category.
3. Select a ringer melody.
4. Press <Save>.
You can change the colour for the
display components, such as title
bars and highlight bars.
Menu mode
skin colour
1. In Idle mode, press <Menu
and select Settings Display
settings Skin
2. Select a colour pattern.
>
→
→
.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
You can switch to Quiet mode to
avoid disturbing other people with
your phone sound.
Quiet mode
You can protect the phone against
unauthorised use with a phone
password.
Phone lock
Press and hold
[
]
in Idle mode.
1. In Idle mode, press <Menu
and select Settings
Security Change
password
2. Enter the default password,
>
→
→
.
You can use the Navigation keys as
shortcut keys to access specific
menus directly from Idle mode.
Menu
shortcuts
“00000000” and press <OK>.
To assign a shortcut menu:
3. Enter a new 4- to 8- digit
1. In Idle mode, press <Menu
and select Settings Phone
settings Short cut
2. Select a key.
>
password and press <OK>.
→
.
→
4. Enter the new password again
and press <OK>.
5. Select Phone lock
6. Select Enable
7. Enter the password and press
OK>.
.
3. Select a menu to be assigned to
the key.
.
<
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Make/Answer calls
Step outside the phone
Begin with your camera, music, and other special features
Use camera
1. In Idle mode, enter an area code
and phone number.
2. Press
3. To end the call, press
Make a call
[
].
[
].
1. Open the phone.
Take a photo
2. In Idle mode, press and hold
1. When the phone is ringing, press
Answer a call
[
]
to turn on the camera.
[
].
3. Aim the lens at the subject and
adjust the image.
2. To end the call, press
[
].
4. Press
[
] to take a photo. The
Press [ ].
/
Adjust the
volume during
a call
photo is saved automatically.
5. Press <Preview> to take
another photo.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
1. In Capture mode, press the left
1. In Record mode, press the left
View a photo
Play a video
soft key and select Go to
soft key and select Go to
photos
.
videos.
2. Press [Left] or [Right] to select
a photo category.
2. Press [Left] or [Right] to select
a video category.
3. Select a photo you want.
3. Select a video you want.
Play MP3s
1. In Idle mode, press and hold
Record a video
[
] to turn on the camera.
Use these methods:
Copy MP3 files
to the phone
2. Press [
1
] to switch to Record
mode.
•
•
Download from the wireless
web p. 43
ꢀ
3. Press
4. Press
[
] to start recording.
Download from a computer
using Samsung PC Studio
[
] to stop recording. The
video is saved automatically.
ꢀSamsung PC Studio User’s
5. Press <Preview> to record
Guide
another video.
•
Receive via Bluetooth
ꢀp. 83
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Step outside the phone
1. In Idle mode, press <Menu
and select Applications
MP3 player
2. Press <Options> and select
Add to playlist Add all or
Add files
>
1. From the MP3 player screen,
press [ ].
Create a play
list
Play MP3 file
→
.
2. During playback, use the
following keys:
→
•
•
•
[
]: pauses/resumes
.
playback.
[Left]: goes back to the
previous file.
[Right]: skips to the next
file.
3. For Add files, select specific
files and press <Select>.
Repeat from step 2.
•
•
•
[Up]: opens the play list.
[Down]: stops playback.
[
/
]: adjusts the volume.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Use Phonebook
1. In Idle mode, press
Contacts>.
Find an entry
<
To the phone’s memory
Add an entry
2. Select an entry.
1. In Idle mode, enter a phone
3. Select a number and press
number and press <Options>.
[
<
]
to dial, or press
2. Select Save contact
a number type.
→
Phone
Options> to access options.
→
3. Specify the contact information:
First name, Last name, Mobile,
Home, Office, Fax, Other, Email,
Caller ID, Ringtone, Group, and
Memo.
1. In Idle mode, press <Menu
and select Phonebook My
name card
>
Create and
send a name
card
→
.
2. Specify your contact
information.
4. Press <Save> to save the
3. Press [ ] to save the name
card.
entry.
To the SIM card
4. To send the name card to other
1. In Idle mode, enter a phone
people, press <Options> and
number and press <Options>.
select Send
→
SMS/MMS/
2. Select Save contact
→
SIM
.
Email Bluetooth.
/
3. Enter a name.
4. Press <Save> to save the
entry.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Step outside the phone
Browse the web
Send messages
Using a built-in WAP (Wireless Application Protocol)
browser, you can get easy access to the wireless web
to get a variety of up-to-date services and information
and to enjoy downloads of web content.
1. In Idle mode, press <Menu
>
Send a text
message (SMS)
and select Messages
message
2. Enter the message text.
3. Press <Options> and select
→
Create
→
Text message.
In Idle mode, press [ ].
Launch the
browser
Save and send or Send only
4. Enter destination numbers.
5. Press [ ] to send the message.
.
•
•
•
To scroll through browser items,
press [Up] or [Down].
Navigate with
the WAP
browser
To select an item, press
1. In Idle mode, press <Menu
and select Messages Create
Multimedia
>
Send a
<Options> and select Select.
→
multimedia
message
(MMS)
To return to the previous page,
press <Options> and select
message
message
→
.
Back
.
2. Select Subject
.
•
To access browser options,
press <Menu>.
3. Enter the message subject and
press [ ].
18
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select Picture&Video or
1. In Idle mode, press <Menu
and select Messages Create
message Email
2. Select Subject
>
Send a
Send an e-mail
Sound and add a media file.
→
multimedia
message
(MMS)
→
.
For Picture&Video, select Add
image or Add video to add a
photo or video clip.
.
(continued)
3. Enter the e-mail subject and
press [ ].
For Sound, select Add sound
to add a sound clip.
4. Select Message
5. Enter the e-mail text and press
].
6. Select File attach
.
5. Select Message
.
6. Enter the message text and
press [ ].
[
.
7. Press <Options> and select
7. Add image, video, music, or
sound files.
Send
.
8. Enter destination numbers.
8. Press <Options> and select
9. Press [ ] to send the message.
Send.
9. Enter e-mail addresses.
10.Press [ ] to send the e-mail.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Step outside the phone
View messages
From the Inbox:
View a
multimedia
message
(continued)
1. In Idle mode, press <Menu
>
When a notification appears:
View a text
message
and select Messages
messages Inbox
2. Select a message.
→
My
1. Press <View>.
→
.
2. Select a message from the
inbox.
-
From the Inbox:
1. In Idle mode, press <Menu
and select Messages My
messages Email box
2. Select an account.
>
View an e-mail
1. In Idle mode, press <Menu
>
My
→
and select Messages
messages Inbox
2. Select a message.
→
→
.
→
.
3. Press <Yes> when Check new
Email is displayed to retrieve
an e-mail or a header.
When a notification appears:
View a
multimedia
message
1. Press <View>.
4. Select an e-mail or a header.
5. If you selected a header, press
2. Press <Options> and select
Retrieve
.
<
Options> and select
3. Select a message from the
inbox.
Retrieve
.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Use Bluetooth
1. Access an application.
2. Scroll to an item.
Send data
Your phone is equipped with Bluetooth technology
which enables you to connect the phone wirelessly to
other Bluetooth devices and exchange data with them,
talk hands-free, or control the phone remotely.
3. Press <Options> and select
Send via
→
Bluetooth.
4. Select a device.
In Idle mode, press <Menu> and
select Settings Bluetooth
Activation On
Turn on
Bluetooth
5. If necessary, enter the
→
.
→
Bluetooth PIN and press <OK>.
→
To receive data via Bluetooth, your
phone’s Bluetooth feature must be
active.
Receive data
1. In Idle mode, press <Menu
and select Settings
Bluetooth My devices
>
Search for and
pair with a
Bluetooth
device
→
→
→
If necessary, press <Yes> to
confirm the reception.
Search new device
.
2. Select a device.
3. Enter a Bluetooth PIN code or
the other device’s Bluetooth PIN
code, if it has one, and press
<OK>.
When the owner of the other
device enters the same code,
pairing is complete.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using AB mode
Press the appropriate key until the character you want
appears on the screen.
+Enter text
AB, T9, Numeric, and Symbol mode
You can enter text for some features such as
messaging, Phonebook, or Calendar, using AB mode,
T9 mode, Numeric mode, and Symbol mode.
Changing the text input mode
The text input mode indicator appears when the cursor
is in a text field.
•
Press and hold [ ] to switch between T9 and AB
modes. Depending on your country, you may also
be able to access an input mode for your specific
language.
•
•
Press [ ] to change case or switch to Numeric
mode.
Press and hold [ ] to switch to Symbol mode.
Tips for using AB mode
•
To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
Press [ ] to insert a space.
4. Press [ ] to insert a space and enter the next
word.
Press [Left] or [Right] to move the cursor.
Press [
and hold [
C
] to delete characters one by one. Press
Tips for using T9 mode
C] to clear the display.
•
Press [1] to enter periods or apostrophes
automatically.
Using T9 mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
•
•
•
Press [ ] to insert a space.
Press [Left] or [Right] to move the cursor.
Press [
C] to delete characters one by one. Press
and hold [
C] to clear the display.
Entering a word in T9 mode
1. Press [
each key once for each letter.
For example, press [ ], [ ], [
enter HELLO in T9 mode.
2] to [9] to start entering a word. Press
Adding a new word to the T9 dictionary
This feature may not be available for some languages.
1. Enter the word that you want to add.
4
3
5], [5], and [6] to
2. Press [0] to display alternative words for your key
T9 predicts the word that you are typing, and it
may change with each key that you press.
presses. When there are no more alternative
words, Add appears on the bottom line.
2. Enter the whole word before editing or deleting
characters.
3. Press <Add>.
4. Enter the word you want using AB mode and press
3. When the word displays correctly, go to step 4.
<OK>.
Otherwise, press [
choices for the keys that you have pressed.
For example, OF and ME use [ ] and [ ].
Download from Www.Somanuals.com. All Manuals Search And Download.
0] to display alternative word
6
3
23
Using Numeric mode
Numeric mode enables you to enter numbers.
Call functions
Advanced calling features
Press the keys corresponding to the digits you want.
Making a call
1. In Idle mode, enter the area code and phone
number.
Using Symbol mode
Symbol mode enables you to insert symbols.
Press and hold [ ] to enter Symbol mode.
2. Press [ ].
Press
[
C
]
to clear the last digit or press and hold
To
Press
[C]
to clear the whole display. You can move the
display more symbols
select a symbol
[Up] or [Down].
cursor to edit an incorrect digit.
the corresponding
number key.
Making an international call
1. In Idle mode, press and hold [
appears.
0]. The
+
character
clear the entered symbol(s)
insert the symbol(s)
[C].
2. Enter the country code, area code, and phone
number, then press [ ].
<OK>.
Redialling recent numbers
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press [ ].
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a call from Phonebook
Answering a call
When you receive an incoming call, the phone rings
and displays the incoming call image.
Once you have stored a number in Phonebook, you
can dial the number by selecting it from
Phonebook.ꢀp. 31
Press <Accept> or [ ] to answer the call.
You can also use the speed dial feature to assign your
most frequently called numbers to specific number
Tips for answering a call
•
When Anykey answer in the Extra settings
menu is active, you can press any key, except for
keys.
ꢀp. 33
Dialling a number from the SIM card
1. In Idle mode, enter the location number for the
phone number you want and press [ ].
<Reject> or [ ].
ꢀp. 75
•
When Active folder in the Extra settings menu
is active, you can simply open the phone.
ꢀ
p. 74
2. Press [Left] or [Right] to scroll through other
numbers.
•
•
Press <Reject> or [ ] to reject a call.
With the phone closed, press and hold [
reject a call.
/
] to
3. Press <Dial> or [ ] to dial the number you want.
Ending a call
Close the phone or press [ ].
Viewing missed calls
If you have missed calls, the screen displays how
many calls you have missed.
1. Press <View>.
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Call functions
Placing a call on hold/Retrieving
Press <Hold> or <Retrieve> to place a call on hold
or retrieve the call.
Using the headset
Use the headset to make or answer calls without
holding the phone.
Connect the headset to the jack on the left side of the
phone.
Making a second call
You can make another call if your network supports it.
1. Press <Hold> to put the call on hold.
2. Make the second call in the normal way.
3. Press <Swap> to switch between the calls.
The buttons on the headset work as listed below:
To
Press
redial the last call
answer a call
end a call
and hold the button twice.
the button.
4. Press <Options> and select End held call to end
the call on hold.
the button.
5. To end the current call, press [ ].
Answering a second call
You can answer an incoming call while already on the
phone, if your network supports it and you have
Options during a call
You can access a number of functions during a call.
activated the call waiting feature.
ꢀp. 78
Adjusting the volume during a call
1. Press [ ] to answer the call. The first call is
automatically put on hold.
Use [
/
] to adjust the earpiece volume during a call.
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
2. Press <Swap> to switch between the calls.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press <Options> and select End held call to end
Using the menu options
You can access Menu mode and use menu functions.
the call on hold.
4. To end the current call, press [ ].
During a call, some menu functions are not
available.
Transferring a call
You can transfer the currently active call to a caller on
hold, if your network supports it. With this option, the
two callers can talk to each other, but you are
disconnected from the call.
Press <Options> and select Menu.
Switching off the microphone (Mute mode)
You can temporarily switch off your phone’s
microphone so that the person on the phone cannot
hear you.
Press <Options> and select Transfer
.
Using an external speaker
Press <Options> and select Mute or Unmute
.
Use an optional external speaker to talk and listen
with the phone a short distance away. First, you must
plug a speaker into the phone.
Muting or sending key tones
You can turn the key tones off or on.
Press <Options> and select Mute keys or Send
keys
Using a Bluetooth headset
.
Use an optional Bluetooth headset to talk on the
phone without holding the phone to your ear. To use
this feature, you first need to register your headset
To communicate with answering machines or
computerised telephone systems, Send keys must
be selected.
and connect it to the phone.
Press <Options> and select Switch to headset or
Switch to phone
ꢀp. 80
.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Call functions
Sending a sequence of DTMF tones
Using SIM services
Dual tone multi-frequency (DTMF) tones are the tones
used in phones for tone dialling.
The SIM service menu is available if you use a SIM
card in your phone. A SIM card provides services such
as news, weather, sports, entertainment, and location
services.
You can send DTMF tones as a group after entering the
entire number you need to send or retrieving a
number from Phonebook. This feature is helpful for
entering a password or an account number when you
call an automated system, like a banking service.
For details, see your SIM card instructions or contact
your service provider.
Making a multi-party call
1. When connected with a teleservice system, press
Use this feature to allow as many as six people to join
a multi-party call, or conference call.
<
Options> and select Send DTMF
2. Enter the number you need to send and press
OK>.
.
<
Your service provider must support multi-party calls
for you to use this feature.
Using Phonebook
You can access the Phonebook menu to locate or
store entries.
Setting up a multi-party call
1. Call the first participant.
ꢀp. 31
2. Call the second participant. The first call is
automatically put on hold.
Press <Options> and select Phonebook
.
3. Press <Options> and select Join. The first
participant is added to the multi-party call.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
4. If desired, call another person or answer an
incoming call.
Menu functions
5. Press <Options> and select Join
.
All menu options listed
6. Repeat steps 4 and 5 as desired.
Call records (Menu 1)
Use this menu to view the calls you have dialled,
received, or missed, the length of your calls, and the
cost of your calls.
Having a private conversation with one
participant
1. Press <Options> and select Private
.
2. Select a name or number from the participant list.
To access this menu, press <Menu> in Idle mode and
You can talk privately with that person, while the
other participants converse with each other.
select Call records
.
3. To return to the multi-party call, press <Options
>
Current contacts (Menu 1.1)
and select Join
.
This menu displays the 90 most recent calls dialled,
received, or missed.
Dropping one participant
1. Press <Options> and select Remove
.
Accessing a call record
1. Press [Left] or [Right] to select a call type.
2. Press [Up] or [Down] to scroll through the call list.
2. Select a name or number from the participant list.
The participant is dropped from the call, but the
call continues with the other parties.
3. Press [ ] to view the details of a call, or [ ] to
dial a number.
3. Close the phone or press [ ] to end the multi-
party call.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
Using call record options
Delete all (Menu 1.5)
While viewing the call list, press <Options> to access
the following options:
Use this menu to delete all of the records in each call
type.
•
•
•
•
•
Detail: show the details of the selected call.
Paste: edit the phone number.
1. Press [ ] to check the call type(s) to be cleared.
2. Press <Delete>.
Save contact: save the number to Phonebook.
Send message: send an SMS or MMS message.
3. Press <Yes> to confirm the deletion.
Call time (Menu 1.6)
Delete: delete the selected call record or all
records.
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
Missed calls (Menu 1.2)
This menu displays the 30 most recent calls that you
did not answer.
•
•
Last call time: check the length of your last call.
Total sent: check the total length of all the calls
you have dialled.
Dialled calls (Menu 1.3)
•
Total received: check the total length of all the
This menu displays the 30 most recent calls you have
dialled.
calls you have received.
To reset the call timers, press <Reset>. You need to
enter the phone password.
Received calls (Menu 1.4)
The password is preset to 00000000. You can
This menu displays the 30 most recent calls you have
received.
change this password.
ꢀp. 83
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Call cost (Menu 1.7)
Phonebook (Menu 2)
This network feature displays the cost of calls. This
menu is available only if your SIM card supports this
feature. Note that this is not intended to be used for
billing purposes.
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Phonebook.
•
•
Last call cost: check the cost of your last call.
To access this menu, press <Menu> in Idle mode and
Total cost: check the total cost of all of your calls.
If the total cost exceeds the maximum cost set in
Set max cost, you must reset the counter before
you can make another call.
select Phonebook
.
Contacts list (Menu 2.1)
Use this menu to search for numbers in Phonebook.
•
•
•
•
Max cost: check the maximum cost limit set in
Press <Contacts> in Idle mode to quickly access
this menu.
Set max cost
.
Reset counters: reset the cost counters. You
need to enter your PIN2.
Finding an entry
1. Enter the first few letters of the name that you
want to find.
Set max cost: set the maximum cost authorised
for your calls. You need to enter your PIN2.
2. Select the name you want from the list.
Price/Unit: set the price per unit that is applied
when the cost of your calls is calculated. You need
to enter your PIN2.
3. Press [ ] to dial the number, or <Options> to
access Phonebook options.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
2. Change the settings or enter information about the
contact.
Using Phonebook options
While viewing the contact list or contact details, press
•
•
First name
Mobile Home
number in any category.
/
Last name: assign a name.
<
Options> to access the following options:
View: display details about the contact.
Edit: edit the contact information.
/
/
Office Fax Other: add a
/
/
•
•
•
•
Email: assign an e-mail address.
•
Send message: send an SMS, MMS, or e-mail
message.
Caller ID: assign an image as a caller ID
image to alert you to a call from the number.
Ringtone: assign a ringer melody to alert you
to a call from the number.
•
•
•
•
Add new contact: add a new contact to
Phonebook.
•
Copy to: copy the contact to the phone’s memory
or the SIM card.
•
•
Group: assign the number to a caller group.
Memo: add a memo about the person.
Send via: send the contact via SMS, MMS, e-mail,
or Bluetooth.
3. Press <Save> to save the contact.
Storing a number on the SIM card
1. Select SIM and enter a name.
Delete: delete the selected contact or all contacts.
Add new contact (Menu 2.2)
2. Press [Down] and enter a phone number.
Use this menu to add a new contact to Phonebook.
3. Press [Down] and change the location number, if
necessary.
Storing a number in the phone’s memory
4. Press <Save> to save the contact.
1. Select Phone
.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing caller groups
Group (Menu 2.3)
While viewing the group list, press <Options> to
access the following options:
Use this menu to organise your contacts in caller
groups.
•
•
•
•
View: display the members of the selected group.
Add: add a new group.
Creating a new caller group
1. Press <Options> and select Add
.
Edit: change the properties of the selected group.
2. Enter a name for the group.
Send message: send an SMS, MMS, or e-mail
message to the member(s) you want.
3. Select the Caller ID line and select an image.
4. Select the Ringtone line and select a melody.
5. Press <Save> to save the group.
•
Delete: delete the selected group or all groups.
Group members, however, are not deleted from
Phonebook.
Adding members to a caller group
1. Select a group.
Speed dial (Menu 2.4)
2. Press <Add>. The list of contacts stored in your
Use this menu to assign a speed dial number (2 to 9)
for eight of your most frequently called numbers.
phone’s memory is displayed.
3. Press [ ] to select specific contacts you want to
add to the selected group and press <Select>.
Assigning speed dial numbers
4. To add more members, press <Options> and
1. Select a key location from
reserved for your voice mail server.
2. Select a contact you want from the contact list.
2
to
9. Key [1] is
select Add
→
a contact.
5. Repeat step 4 as desired.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
Managing speed dial entries
Using name card options
From the Speed dial screen, press <Options> to
access the following options:
After saving your name card, press <Options> to
access the following options:
•
•
•
Add: assign a number to an unassigned key.
•
•
Edit: edit the name card.
View: show the number assigned to the key.
Send: send the name card via SMS, MMS, e-mail,
or Bluetooth.
Change: assign a different number to the
assigned key.
•
•
Exchange name card: exchange name cards with
another person via Bluetooth.
•
Remove: clear the speed dial setting.
Delete: delete the name card.
Dialling speed dial entries
Press and hold the appropriate key in Idle mode.
Own number (Menu 2.6)
Use this feature to check your phone numbers, or to
assign a name to each of the numbers. Changes made
here do not affect the actual subscriber numbers on
your SIM card.
My name card (Menu 2.5)
Use this menu to create a name card and send it to
other people.
Saving your name card
The procedure for creating your name card is the
same as the one for saving a phone number in the
phone’s memory.ꢀp. 32
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Management (Menu 2.7)
Service number (Menu 2.8)
Use this menu to manage Phonebook.
This menu is available if your SIM card supports
Service Dialling Numbers (SDN). Use this menu to
view the list of SDNs assigned by your service
provider, including emergency numbers, directory
enquiries, and voice mail numbers.
•
Default saving: select a default memory location
to save contacts.
If you select Ask on saving, the phone will ask
you to select a memory location when saving a
number.
1. Scroll to the number you want and press <View>.
2. Press <Dial> or [ ].
•
•
Copy all to phone: copy all of the contacts stored
on the SIM card to the phone’s memory.
Applications (Menu 3)
Use this menu to play Java games, to play music files,
to record a voice memo, to set time zones and alarms,
or to use the phone as a calculator, timer, or
stopwatch. You can also synchronise Phonebook or
calendar data in the phone’s memory with a computer.
Delete all: delete all of the contacts from your
phone’s memory, your SIM card, or both.
1.Press [ ] to check the location(s) to be cleared.
2.Press <Delete>.
3.Enter the phone password and press <OK>.
The password is preset to 00000000. You
To access this menu, press <Menu> in Idle mode and
can change this password.ꢀp. 83
select Applications
.
4.Press <Yes> again to confirm the deletion.
•
Memory status: display the number of contacts
you have stored in Phonebook.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
Checking memory status
Java world (Menu 3.1)
You can view the amount of total memory for the Java
games as well as the amount of available and used
memory. You can also view the number of downloaded
games.
Use this menu to access and play Java games and to
select a profile for accessing Java services.
Using Java game options
From the Java world screen, select Downloads and
press <Options> to access the following options:
From the Java world menu, select Memory status
.
•
•
Launch: launch the selected game.
MP3 player (Menu 3.2)
Delete: delete the selected game or all games,
except for embedded games.
Use this menu to enjoy music. First, you need to save
MP3 files in your phone’s memory.
•
Properties: view game properties.
Downloading or receiving music files
Accessing Java settings
Use these methods to save MP3 files to your phone’s
memory:
You can select a connection profile for accessing Java
services.
•
•
Download from the wireless web
ꢀp. 43
From the Java world menu, select Settings and then
a profile.
Download from a computer using the Samsung PC
Studio programꢀSamsung PC Studio User’s
Guide
You can edit a profile using the Connection
settings menu.ꢀp. 84
•
Via an active Bluetooth connectionꢀp. 83
The downloaded or received files are stored in the
Music folder. p. 60
ꢀ
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating a play list
Keys
[Up]
Function
Add MP3 files to the play list.
Opens the play list.
1. From the MP3 player screen, press <Options
>
[Down]
Stops playback.
and select Add to playlist
.
2. Select either of the following options:
[
[
[
[
[
[
/
]
Adjusts the volume level.
Turns the 3D sound on or off.
Changes the skin type.
Changes the repeat mode
Changes the equalizer mode
Turns shuffle mode on or off.
•
•
Add all: add all of the files in the phone’s
memory to the play list.
Add files: add specific files to the play list.
1
2
3
4
6
]
]
]
]
]
3. If you selected Add files, press [ ] to check the
files to be added and press <Select>.
4. Press <Back> to go back to the MP3 player
screen.
Playing music files
Using MP3 file options
From the MP3 player screen, press [ ].
During playback, use the following keys:
From the MP3 player screen, press <Options> to
access the following options:
•
•
•
•
Play: begin playback.
Keys
Function
Open playlist: display the play list.
Go to music: go to the Music folder.
[
]
Pauses or resumes playback.
Goes to the previous file.
Skips to the next file.
[Left]
Send via: send the currently selected file via
e-mail or Bluetooth.
[Right]
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
•
Set as: set the file as your ring tone or as a caller
alert melody for a Phonebook entry.
•
•
•
Change order: move the selected file to the
position you want within the play list.
Remove: remove the selected file or all files
from the play list.
•
•
Remove from playlist: remove the selected file
from the play list.
Properties: view the properties of the file.
Settings: change the default settings for playing
music files.
Playing MP3 files with the phone closed
Repeat mode: select a repeat mode.
•
Use the following keys to control the MP3 player:
Shuffle: set the MP3 player to play music in
random order.
Keys Function
[
]
Launches or closes the MP3 player
when held down.
Equalizer: select an equalizer setting.
3D sound: turn 3D sound on or off.
Skin: select a skin type.
Starts playing music or pauses
playback.
Volume: select a volume level.
[
]
Returns to the previous file.
Skips to the next file.
Adjusts the volume.
•
Properties: view the properties of the file.
[
[
]
Accessing the play list
1. From the MP3 player screen, press <Options
>
/
]
and select Open playlist to access the play list.
2. Press <Options> to access the following options:
•
Press and hold [ ] to lock the exposed keys to
keep accidental presses from affecting playback.
The key lock icon ( ) appears on the bottom line.
•
•
Play: play the currently selected file.
Add to playlist: add files to the play list.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Properties: view the properties of the voice
memo.
Voice recorder (Menu 3.3)
Use this menu to record voice memos. A voice memo
can be up to one hour long.
Playing a voice memo
1. From the Voice recorder screen, press <Options
>
Recording a voice memo
and select Go to voice list
.
1. Press [ ] to start recording.
2. Speak into the microphone.
Press [ ] to pause or resume the recording.
2. Select a voice memo. The memo plays.
During playback, use the following keys:
Keys
Function
3. When you finish, press [Down]. The voice memo is
saved automatically.
[
]
Pauses or resumes playback.
Moves backward.
Moves forward.
4. Press [Up] to record another voice memo, or press
[Left]
<Options> to access the following options:
•
•
•
•
Play: play back your voice memo.
Record: record another voice memo.
Go to voice list: display the voice memo list.
Send via: send the voice memo via MMS,
e-mail, or Bluetooth.
[Right]
[Down] or
Stops playback.
<Stop>
[
/
]
Adjusts the volume.
•
•
•
Delete: delete the voice memo.
Rename: change the name of the voice memo.
Protection: protect the voice memo from
being deleted.
Using voice memo options
From the Voice recorder screen, press <Options> to
access the following options:
•
Record: record a new voice memo.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
•
Go to voice list: go to the list of voice memos you
have recorded.
Applying Daylight Savings Time
1. From the world map, press <Options> and select
Set daylight saving time
.
•
Setting: select a recording time setting.
2. Press [ ] to check the time zone(s) you want.
Limit for MMS: record a voice memo for adding to
an MMS message.
3. Press <Save>.
Limit for Email: record a voice memo for adding
to an e-mail.
Alarm (Menu 3.5)
Max 1 hour: record a voice memo for up to one
hour.
Use this menu to set alarms to sound at specific times.
Setting an alarm
1. Select the type of alarm.
World time (Menu 3.4)
2. Press [Left] or [Right] to select On on the Alarm
Use this menu to set your local time zone and find out
what time it is in another part of the world.
line and press [Down].
3. Enter the time for the alarm to sound and press
[Down].
Setting your local time zone
1. From the world map, press [Left] or [Right] to
select the city that corresponds to your home time
zone. As the time line moves, the time and date of
the given zone display.
4. Select AM or PM in 12-hour time format and press
[Down].
Your phone is preset to 12-hour time format.
You can change the time format.ꢀp. 73
2. Press <Options> and select Save to save the
time zone.
5. Select a repeat option.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Select the Alarm tone line and select an alarm
PIM sync (Menu 3.6)
melody.
Use this menu to synchronise personal data with
corresponding PC applications via the optional
WideSync program.
7. Press <Save>.
Stopping an alarm
•
When an alarm sounds, press <Exit> or any key
to stop the alarm.
Creating a synchronisation profile
1. Press <Add>.
•
When a wake-up call alarm sounds, press
2. Specify the following information for the profile:
<Confirm> or [ ] to stop the alarm.
•
•
Profile name: enter the profile name.
Sync category: select the applications you
want to synchronise.
Otherwise, press <Snooze> or any key to stop
the alarm and cause it to sound again after 5
minutes. You can do this a maximum of five times.
•
•
Sync type: select a synchronisation type.
Sync protocol: select a connection method.
Setting the alarm to ring even if the phone is
off
3. Press <Save> to save the profile.
From the Alarm screen, select Auto power
→
On.
Starting synchronisation
If the phone is off when it is time for the alarm to ring,
the phone is switched on and sounds the alarm.
1. Make sure that your PC has MS Outlook and the
WideSync program installed, and the phone and
the PC are connected by a USB cable or an active
Bluetooth connection.
2. Open MS Outlook.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
3. From the PIM sync screen, select a profile.
4. Press [ ].
Calculator (Menu 3.7)
Use this menu to perform basic arithmetic functions,
such as addition, subtraction, multiplication, and
division.
Using synchronisation options
From the PIM sync screen, press <Options> to access
the following options:
1. Enter the first number.
Press the left soft key to insert a decimal point or
bracket.
•
Start sync: start a synchronisation for the
selected profile.
To move the cursor, press
[
] or [
].
•
View result: show the result of the last
synchronisation.
2. Press one of the Navigation keys to access the
math function you want.
•
•
New sync profile: add a new profile.
Edit sync profile: change the properties of the
profile.
3. Enter the second number.
4. Press [ ] to view the result.
•
Delete: delete the selected profile or all profiles.
Converter (Menu 3.8)
Use this menu for common conversions, such as
currency and temperature.
1. Select a converter.
2. Press [Left] or [Right] to select the original unit
and press [Down].
42
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Enter the value to be converted and press [Down].
Stopping the timer
•
•
Press <Exit> or any key when the timer rings.
•
•
Press [ ] to insert a decimal point.
Press [ ] to change the temperature to above
zero (+) or below zero (-).
Press [ ] on the Timer screen to stop the timer
before it rings.
For the currency converter, you can view and
set up the rates by pressing <View rate>.
Stopwatch (Menu 3.0)
Use this menu to measure elapsed time. The precision
of the stopwatch is one one-hundredth of a second.
The maximum measurement time is 10 hours.
4. Press [Left] or [Right] to select the unit you want
to convert to.
The equivalent value for the amount you entered
displays.
1. Press [ ] to start the stopwatch.
2. Press [ ] to check an interval. You can repeat this
step for a total of 4 intervals.
Timer (Menu 3.9)
3. To reset the stopwatch, press <Reset>.
Use this menu to set a period of time for the phone to
count down. The phone will sound an alarm when the
specified period of time has expired.
Browser (Menu 4)
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
Using the WAP browser, you can access up-to- date
information and a wide variety of media content, such
as wallpapers, ring tones, and music files.
Starting the timer
1. Press <Set>.
2. Enter the length of time you want to count down
and press <OK>.
3. Press [ ] to start counting down.
To access this menu, press <Menu> in Idle mode and
select Browser
.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
•
Show URL: display the URL address of the current
web page. You can also set the current page as the
home page for the WAP browser or a bookmark.
Home (Menu 4.1)
Use this menu to connect your phone to the network
and load the home page of the wireless web service
provider. You can also press [ ] in Idle mode.
•
•
Clear cache: clear the cache memory.
Inbox: access WAP push messages in the WAP
browser.
Navigating with the WAP browser
To
Press
•
•
Show images: display images on the current
page.
scroll through browser items
select a browser item
[Up] or [Down].
Certificates: display the WAP browser certificate.
<Options> and
Exiting the WAP browser
select Select
.
Press [ ] to exit the browser.
return to the previous page
<Options> and
select Back
.
Bookmarks (Menu 4.2)
Use this menu to save URL addresses in order to
quickly access websites.
Using WAP page options
From any WAP page, press <Menu> to access the
following options:
Adding a bookmark
1. Select an empty location.
•
•
•
•
Bookmarks: display the Bookmarks list.
Reload: reload the current page.
2. Enter a name for the bookmark.
3. Enter a URL address and press <Save>.
Home: go back to the home page.
Go to URL: enter a URL address manually.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessing a bookmarked page
Clear cache (Menu 4.5)
Scroll to a bookmark item and press [ ].
Use this menu to clear the cache, a temporary
memory that stores recently accessed web pages.
Using bookmark options
After saving an item, press <Options> to access the
following options:
Messages (Menu 5)
Use the Messages menu to send and receive text
messages, multimedia messages, and e-mails. You
can also use WAP push message, and cell broadcast
message features.
•
•
•
Go to URL: access the bookmarked website.
Edit: edit the address and name of the bookmark.
Delete: delete the selected bookmark or all
bookmarks.
To access this menu, press <Menu> in Idle mode and
select Messages
.
http:// (Menu 4.3)
Use this menu to manually enter the URL address of a
website and access the website.
Create message (Menu 5.1)
Use this menu to create and send SMS, MMS, or
e-mail messages.
WAP profile (Menu 4.4)
Text message (Menu 5.1.1)
Use this menu to select a connection profile for
accessing the WAP browser.
Short Message Service (SMS) allows you to send or
receive text messages that may include pictures,
animated images, and melodies.
You can edit a profile using the Connection
settings menu.ꢀp. 84
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
•
•
Text style: change the text attributes.
Input method: change the text input mode.
The maximum number of characters allowed in a
text message varies by service provider. If your
message exceeds the maximum number of
characters, the phone will split the message.
3. When you have finished, press <Options> and
select Save and send or Send only
.
4. Enter a destination number.
1. Enter your message.
To send the message to more than one recipient,
press [Down] and fill in additional destination
fields.
2. Press <Options> to access one of the following
options:
•
Save and send: both save a copy of the
message and send the message.
Send only: send the message.
Insert: add a template, Phonebook entry, or
bookmark.
5. Press [ ] to send the message.
Multimedia message (Menu 5.1.2)
•
•
Multimedia Message Service (MMS) delivers messages
containing a combination of text, image, video, and
audio, from phone to phone or from phone to e-mail.
•
•
•
•
Add picture/animation/melody: attach a
picture, animated image, or melody.
Attach: attach a name card or calender data
as a data format attachment.
Save to: save the message in the Drafts box
or one of the folders you have created.
Language select: change the language used
in T9 input mode.
1. Select the Subject line and enter the message
subject.
2. Select the Picture&Video or Sound line and add
an image, a video, or a sound file.
The maximum size allowed for an MMS message
can differ depending on the country. If you
cannot attach another file, add another page.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select the Message line and enter the message
•
•
•
Attach: attach a name card or calender data
as a data format attachment.
Clear subject/message: clear the subject or
text.
Remove media/sound: remove an added
item.
text.
4. Press <Options> to access the following options:
•
•
•
Add: add a subject or text to your message.
Edit: edit the subject or text of your message.
Add image/video/sound: add photos, videos,
or sounds to the message. Depending on the file
type or DRM (Digital Rights Management) system,
5. When you have finished, press <Options> and
select Send
.
some files may not be able to be forwarded
.
6. Enter a phone number or e-mail address.
•
•
Change image/video/sound: change an
added item.
Preview: display the message you have
created.
Send: send the message.
Save to: save the message in the Drafts box
or one of the folders you have created.
Add page: add pages. Move to each page by
pressing [Left] or [Right] on the message
screen.
Delete page: delete an added page.
Edit page: change the duration of page display
or move the page forward.
To send the message to more than one recipient,
press [Down] and fill in additional destination
fields.
7. Press <Options> and select Send
.
•
•
Email (Menu 5.1.3)
You can send e-mails that include text, audio, and
images. To use this feature, you need to subscribe to
an e-mail service and set up your e-mail account and
•
profile.ꢀp. 58
1. Select the Subject line and enter the subject of
•
•
your e-mail.
2. Select the Message line and enter the e-mail text.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
3. Press <Options> to add multimedia files by
selecting the following options in the File attach
line:
•
•
•
Remove subject/message: clear the subject
or text.
Remove attachment: delete the selected
attachment.
Remove all attachment: delete all
attachments.
•
Add image/video/sound/music: add items
stored in the phone’s memory. Depending on
the file type or DRM (Digital Rights Management)
system, some files may not be able to be
5. When you have finished, press <Options> and
select Send
forwarded
.
.
•
•
Other files: add files in a format which your
phone does not support.
Attach: attach a name card or calender data
as a data format attachment.
6. Enter an e-mail address.
To send the e-mail to more than one recipient,
press [Down] and fill in additional destination
fields.
4. When you have finished, press <Options> to
7. Press [ ] to send the e-mail.
access the following options:
Options may vary depending on the selected
field.
My messages (Menu 5.2)
Use this menu to store all of the messages you have
received, sent, or failed to send.
•
•
•
•
Edit: edit the subject or text.
View Play: display/play an added item.
/
Inbox (Menu 5.2.1)
Send: send the e-mail.
Save to: save the message in the Drafts box
or one of the folders you have created.
This folder stores all of the messages you have
received, except for e-mails.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
CB messages
Viewing a message at the time of its receipt
Delivery report for your sent messages
When a message has been received, the phone alerts
you by:
• According to the DRM (Digital Rights
Management) system, messages having web
content may not be able to be forwarded.
They are indicated by
• A icon next to a message means that a
message is of high priority. A grey-coloured
message icon is of low priority.
•
•
Displaying a message icon with text notification
Sounding a tone or vibrating, depending on the
message alert setting.
.
To read a message immediately, press <View> and
select a message from the Inbox.
For an MMS message, press <Options> and select
Retrieve. The message is downloaded from the MMS
server to the phone’s memory.
While viewing the message list, press <Options> to
access the following options:
Viewing a message in Inbox
Options may vary depending on your country or
service provider.
The following icons may appear on the message list;
depending on the message type or status, icons may
vary:
•
•
View: open the message.
Retrieve: retrieve the MMS message from the
server.
•
•
•
SMS
MMS
•
•
Delete: delete the message.
MMS notification;
being retrieved from the server and
indicates that an MMS is
Move to My folder: move the message to one of
the folders you have created in the My folders
menu.
indicates that an MMS has failed to retrieve.
•
WAP push messages/OTA messages
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
•
Sort by: change the sort order of the messages.
MMS messages
•
Protection: protect the message from being
deleted.
•
•
Reply via SMS: send a reply message via SMS.
Reply via MMS to: send a reply message via
MMS.
Using message options
•
•
•
Forward: forward the message to another person.
While viewing a message, press <Options> to access
the following options:
Delete: delete the message or all messages.
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
SMS messages
•
•
•
•
Reply: reply to the sender.
Forward: forward the message.
Delete: delete the message.
•
•
•
Cut media: save media content from the message
into your phone’s memory.
Protection: protect the message from being
deleted.
Move to phone/SIM: move the message between
the SIM card and the phone’s memory.
Properties: view the message properties.
•
•
•
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
OTA messages
•
Install: apply the configuration specified in the
message to your phone.
Cut media: save media content from the message
into your phone’s memory.
•
•
Delete: delete the message.
Protection: protect the message from being
deleted. You can protect only those messages
stored in the phone’s memory.
Protection: protect the message from being
deleted.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
WAP push messages
Drafts (Menu 5.2.2)
•
Go to URL: connect to the URL specified in the
message.
This folder stores messages you have saved to send at
a later time.
•
Cut address: extract URL, e-mail addresses, or
phone numbers from the message.
Press <Options> to access the following options:
•
•
•
Edit: edit the message.
•
•
Delete: delete the message.
Delete: delete the message or all messages.
Protection: protect the message from being
deleted.
Move to My folder: move the message to one of
the folders you have created in the My folders
menu.
CB messages
•
•
Save: save the message to the phone’s memory.
•
•
Sort by: change the sort order of the messages.
Cut address: extract URL, e-mail addresses, or
phone numbers from the message.
Protection: protect the message from being
deleted.
•
Delete: delete the message.
•
Properties: view the message properties.
Delivery report messages
Outbox (Menu 5.2.3)
•
Cut address: extract URL, e-mail addresses, or
phone numbers from the message.
This folder stores messages that the phone is
attempting to send or has failed to send.
•
•
Delete: delete the message.
In this folder, the following icons are available:
Protection: protect the message from being
deleted.
•
•
Message that the phone is sending
Message that the phone has failed to send
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
While viewing a message or the message list, press
•
•
•
Send: send the message.
<Options> to access the following options:
Delete: delete the message or all messages.
•
View: display the message.
Move to My folder: move the message to one of
the folders you have created in the My folders
menu.
•
Delete: delete the message or all messages.
•
Move to My folder: move the message to one of
the folders you have created in the My folders
menu.
•
•
•
Sort by: change the sort order of the messages.
Forward: forward the message to other people.
•
•
•
•
Sort by: change the sort order of the messages.
Send again: send the message.
Cut address: extract URL, e-mail addresses, or
phone numbers from the message.
Forward: forward the message to other people.
•
•
Protection: protect the message from being
deleted.
Cut address: extract URL, e-mail addresses, or
phone numbers from the message.
Properties: view the message properties.
•
Protection: protect the message from being
deleted.
Email box (Menu 5.2.5)
This folder stores e-mails that you have received.
1. Select an e-mail account.
•
Properties: view the message properties.
Sent (Menu 5.2.4)
2. Press <Yes> when Check new Email is displayed
This folder stores messages that you have sent.
to get new mails from the server.
The phone checks for new e-mails and retrieves
received e-mails.
While viewing a message or from the message list,
press <Options> to access the following options:
•
View: open the message.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
The following icons may appear on the message
list; depending on the e-mail status, icons may
vary:
While viewing the e-mail content or message list,
press <Options> to access the following options:
Options may vary depending on the status of the
e-mail.
•
•
•
•
has been read
has not been read
has been retrieved from the server
has not been retrieved;
•
•
View: open the selected item.
Retrieve: retrieve one or all of the e-mails from
the e-mail server.
indicates that
an e-mail is being retrieved from the
•
Reply: send a reply to the sender or to all of the
other recipients.
server and
indicates that an e-mail has
failed to retrieve.
•
•
•
Forward: forward the e-mail.
A
icon next to a message means that a
message is of high priority. A grey-
coloured message icon is of low priority.
Delete: delete the currently selected item.
Move to My folder: move the e-mail to one of the
folders you have created in the My folders menu.
3. Scroll to an e-mail or header and press [ ].
•
Add to filtering list: add the sender’s e-mail
address to the filter list to reject e-mails from that
address.
4. If the e-mail has more than one page, press [
to scroll through pages one by one.
/
]
Press [Left] or [Right] to move to the first or last
page.
•
•
Cut address: extract URL, e-mail addresses, or
phone numbers from the message.
5. Select an attached file to view or play it.
Cut media: save media content from the message
to your phone’s memory.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
•
Check new Email: check the Email box for new
e-mails.
Templates (Menu 5.3)
Use this menu to make and use templates of
frequently used messages.
•
•
Protection: protect the e-mail from being deleted.
Properties: view the properties of the e-mail.
Creating a text template
1. Select an empty location.
My folders (Menu 5.2.6)
Use this menu to create new folders and store and
organise your messages.
2. Enter a message and press <OK>.
Using template options
Creating a new folder
1. Press <OK>.
From the template list, press <Options> to access
the following options:
2. Enter a folder name and press <OK>.
•
•
Edit: edit the template.
Using folder options
Send message: send a new message using the
template.
On the folder list, press <Options> to access the
following options:
•
•
Delete: delete the template.
•
•
•
•
Open: open the folder.
Add new: add a new template.
Add folder: add a new folder.
Delete all (Menu 5.4)
Rename folder: change the name of the folder.
Delete: delete the selected folder.
Use this menu to delete messages in each message
folder one by one, or all at once. You can also delete
all messages in all folders at one time.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Bearer selection: select either GSM or GPRS
preferred, depending on your network.
Settings (Menu 5.5)
Use this menu to set up various options for using the
messaging service.
•
•
Current profile: select a profile.
Profile settings: set the following properties in a
profile:
Text message (Menu 5.5.1)
You can configure default SMS settings for sending or
receiving messages.
Service centre: store or change the number of
your message centre.
•
Send settings: set up the following options for
sending a text message:
Default destination: enter the default
destination. It will be displayed in the first field on
the Recipients field.
Reply path: allow the recipient to reply to you
through your message centre.
Default type: set the default message type. The
network can convert the messages into the
selected format.
Delivery report: set the network to inform you
when your message has been delivered.
Character support: select a character encoding
type. If you select Automatic, the phone switches
the encoding type from GSM-alphabet to Uni-
code if you enter an Uni-code character. Use of
Uni-code encoding will reduce the maximum
number of characters in a message to about half.
If this menu is not shown, your phone provides the
Automatic character encoding by default.
Default validity: set the length of time your
messages are stored in the SMS centre while
attempts are made to deliver them.
Setting name: enter a profile name.
Multimedia message (Menu 5.5.2)
You can configure default MMS settings for sending or
receiving messages.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
•
Send settings: set up the following options for
sending a multimedia message:
Personal allowed: accept personal messages.
Report allowed: send a delivery report from the
Delivery report: set the network to inform you
network to the sender.
when your message has been delivered.
Home reception: determine if your phone
retrieves new messages automatically when you
are in your home service area.
Hide address: set your address to be hidden from
the recipient’s phone.
Read reply: determine whether or not the phone
sends a read-reply request.
Roaming reception: determine if your phone
retrieves new messages automatically when you
are roaming in another network.
Priority: set the priority level of your messages.
Home reception and Roaming reception have the
following options:
Expiry date: set the length of time your messages
are stored in the message centre.
•
Automatic: the phone automatically retrieves
messages from the server.
Reject: the phone rejects all messages.
Manual: the phone displays notifications. Use
the Retrieve option to manually download new
messages.
Delivery time: set a time delay before messages
are sent.
•
•
Outgoing message size: select a maximum size
of attached items allowed for an MMS message.
•
Retrieve settings: set up the following options
for receiving a multimedia message:
•
Profile: select a connection profile to be used for
MMS.
Reject unknown sender: reject messages from
unknown senders.
You can edit a profile using the Connection
Advert allowed: accept advertisements.
settings menu.ꢀp. 84
Information allowed: accept information
messages.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Receive settings: set up the following options for
receiving an e-mail:
Email (Menu 5.5.3)
You can configure default network settings that are
required to send or receive e-mails.
Check interval: determine how often the phone
checks the server for incoming e-mails.
You cannot change e-mail profile settings while an
e-mail is being sent or retrieved.
If you set this option to Do not notify, you can
use the Check new Email feature to check your
e-mail manually.
•
Send settings: set up the following options for
sending an e-mail:
Read reply: determine whether or not the phone
sends a read-reply request.
Delivery report: set the network to inform you
when your e-mail has been delivered.
When this option is set to Announce, the phone
reminds you to send a read-reply request with
your e-mail address.
Reply to address: set the network to send a
request for a reply along with your e-mail to the
recipient.
Reject if larger than: determine the maximum
size for incoming e-mails. Your phone will reject
e-mails that exceed the specified size.
Priority: select the priority level of your e-mail.
Include signature: attach your name, phone
number, a simple memo, or a tag line to your
e-mail.
Leave a copy of messages on the server: leave
copies of e-mails after retrieving.
Edit name: edit the name in your signature.
•
Block list: specify e-mail addresses or subjects to
reject messages from the address or containing
the subjects.
Edit telephone number: edit the phone number
in your signature.
Edit note: edit the tag line in your signature.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
•
Email account: set up an e-mail account and
select an account to be used.
•
•
POP3 port: enter the POP3 port number.
APOP login: connect to the server by using
the APOP login scheme when this option is
selected.
Current account: select an account.
Account settings: configure up to five e-mail
accounts using different e-mail servers. The
following options are available for each account:
These options are available when the protocol type
is IMAP4
:
•
IMAP4 server: enter the IP address or domain
name of the server that receives your e-mail.
IMAP4 port: enter the IMAP4 port number.
Include attachments: select this option to
receive attachments with e-mails.
•
Account name: enter a name for the currently
selected account.
User name: enter a user name.
Email address: enter your e-mail address.
User ID: enter your e-mail ID.
Password: enter your e-mail password.
SMTP server: enter the IP address or domain
name of the outgoing e-mail server.
SMTP port: enter the SMTP port number.
Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
•
•
•
•
•
•
•
•
Email retrieval limit: set the number of
headers you will retrieve from the server.
•
Email profile: select a connection profile to be
used for e-mail services.
•
•
You can edit a profile using the Connection
settings menu.ꢀp. 84
The following options are available when the
protocol type is POP3
POP3 server: enter the IP address or domain
name of the server that receives your e-mail.
Download from Www.Somanuals.com. All Manuals Search And Download.
:
•
58
Push message (Menu 5.5.4)
Memory status (Menu 5.6)
You can change the settings for receiving WAP push
messages from the wireless web server. The following
options are available:
Use this menu to view the maximum memory and
available memory for each message type. You can also
view the memory currently in use in each folder.
•
Receive: set how your phone receives push
messages.
File manager (Menu 6)
The File manager menu allows you to access images,
videos, music files, and sound files stored in the
phone’s memory.
•
Service centre: enter the address of the server
from which you want to receive push messages,
when the Receive option is set to SMS-C
specific
.
To access this menu, press <Menu> in Idle mode and
Broadcast (Menu 5.5.5)
select File manager
.
You can change the settings for receiving CB
messages. The following options are available:
According to the DRM (Digital Rights Management)
system, web content may not be able to be
•
•
Receive: select the reception of CB messages.
forwarded. The content is indicated by
.
Channel list: indicate the channels from which
you wish to receive CB messages. Please contact
your service provider for further details.
Images
This menu displays photos you have taken and images
downloaded or received in messages.
•
Language: select the preferred language in which
broadcast messages display.
Viewing an image
1. Select an image folder.
2. Scroll to an image and press [ ].
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
•
Set as wallpaper: set the video clip, if saved for
adding to MMS messages or e-mails, as your
wallpaper for the idle screen.
Using image options
While viewing an image or the image list, press
<Options> to access the options.
ꢀp. 69
•
•
•
Delete: delete the video clip.
Videos
Rename: change the name of the video clip.
Move to Favourite videos: move the file to the
Favourite videos folder.
This menu displays video clips you have recorded,
downloaded, or received in messages.
•
Share for bluetooth: set whether or not to
prevent this file from being accessed from other
Bluetooth devices.
Video clips recorded on other devices, such as
camcorders, may not play correctly.
Playing a video clip
1. Select a video folder.
•
•
Protection: protect the video clip from being
deleted.
2. Scroll to a clip and press [ ].
ꢀp. 60
Properties: view the properties of the video clip.
Using video options
Music
While viewing the video list, press <Options> to
This menu displays MP3 files you have downloaded,
received in messages, or imported from your
computer.
access the options.
•
•
Play: play the video clip.
Send via: send the video clip via MMS, e-mail, or
Bluetooth.
Playing a music file
Scroll to a file and press [ ].ꢀp. 37
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Using music options
Playing a sound clip
1. Select a sound folder.
2. Scroll to a clip and press [ ].
While viewing the music list, press <Options> to
access the following options:
•
•
•
•
Play: begin playback.
Using sound options
Send via: send the file via e-mail or Bluetooth.
Add to playlist: add a file to the play list.
While viewing the sound list, press <Options> to
access the following options:
Set as: set the file as your ring tone or as a caller
alert melody for a Phonebook entry.
•
•
Play: play the sound file.
Send via: send the file via MMS, e-mail, or
Bluetooth.
•
•
•
Delete: delete the selected file or all files.
Rename: change the file name.
•
Set as: set the file as your ring tone or as a caller
alert melody for a Phonebook entry.
Share for bluetooth: set whether or not to
prevent this file from being accessed from other
Bluetooth devices.
•
•
•
Delete: delete the selected file or all files.
Rename: change the file name.
•
•
Protection: protect the file from being deleted.
Move to Favourite sounds: move the file to the
Favourite sounds folder.
Properties: view the properties of the file.
•
Share for bluetooth: set whether or not to
prevent this file from being accessed from other
Bluetooth devices.
Sounds
This menu displays sound files you have recorded,
downloaded, or received in messages.
•
•
Protection: protect the file from being deleted.
Properties: view the properties of the file.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
Other files
Calendar (Menu 7)
Files that you have received but which are not
supported by your phone are stored in this folder. You
cannot open these files on the phone. Unsupported file
formats include *.doc, *.ppt, and *.txt.
The calendar feature enables you to keep track of your
schedule and to-do list, to view missed alarm events,
and to make a memo.
To access this menu, press <Menu> in Idle mode and
While viewing the file list, press [ ] to access the
following options:
select Calendar
.
Consulting the calendar
•
•
•
•
Send via: send the file via e-mail, or Bluetooth.
Delete: delete the selected file or all files.
Rename: change the file name.
When you enter the Calendar menu, the calendar in
Month view appears with today’s date indicated by a
blue box.
Share for bluetooth: set whether or not to
prevent this file from being accessed from other
Bluetooth devices.
The number of events for the specific day appears at
the bottom of the calendar. The following icons
indicate the type of event:
•
•
Protection: protect the file from being deleted.
•
•
Scheduled event
To-do item
•
•
Anniversary
Memo
Properties: view the properties of the file.
Memory status
Press <Options> to access the following options:
You can check the total amount of memory for media
items and the amount of memory currently in use in
each media box.
•
View mode: change the view mode of the
calendar.
•
Create: add a new event.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Go to: go to the current date or enter a specific
date.
•
•
•
Subject: enter the title of the event.
Details: enter event details.
Start date and Start time: enter the starting
date and time for the event.
AM/PM: select AM or PM in 12-hour time
format.
End date and End time: enter the ending date
and time for the event.
AM/PM: select AM or PM in 12-hour time
format.
•
•
Sort by: sort items by the type of event.
Delete: delete item(s) stored on the calendar by
using various deleting options.
•
•
•
•
You can only delete scheduled event with a
repeating alarm on Day view.
•
•
Missed alarm events: view events whose alarms
you have missed.
Memory status: view the memory status for
items stored in the phone’s memory.
Location: enter information about the event
location.
•
•
Alarm: set an alarm for the event.
Before: set how long before the event the
alarm is to alert you.
Alarm tone: select an alarm tone.
Repeat: select to set the event to recur and a
repeat unit.
Creating an event
You can schedule up to 400 events on the calendar,
and schedule more than one event per day.
•
•
Entering a new scheduled event
1. Scroll to a date on the calendar.
•
Until: if the event will recur, set the ending
date.
2. Press <Options> and select Create
→
Schedule.
3. Enter information or change the settings in the
following entry fields:
4. Press <Save> to save the event.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
Entering a new anniversary
Entering a memo
1. Select a date on the calendar.
1. Select a date on the calendar.
2. Press <Options> and select Create
3. Enter a memo and press <Save>.
2. Press <Options> and select Create
→
→
→
Memo.
Anniversary
.
3. Enter information or change the settings in the
following entry fields:
Entering a to-do item
1. Select a date on the calendar.
2. Press <Options> and select Create
•
Occasion: enter information about the
anniversary.
To do
.
3. Enter information or change the settings in the
following entry fields:
•
•
Date: enter the date.
Alarm: select to set an alarm for the
anniversary.
•
•
•
•
To do: enter information about the item.
Start date: enter the starting date.
Due date: enter the ending date.
•
•
•
Before: set how long before the event the
alarm is to alert you.
Alarm time: enter the time for the alarm to
sound.
AM/PM: select AM or PM in 12-hour time
format.
Select priority: select a priority level.
4. Press <Save> to save the event.
Viewing an event
•
•
Alarm tone: select an alarm tone.
Repeat every year: select to set the phone to
remind you of the anniversary every year.
Square brackets on a calendar date indicate the
following type of events scheduled for that day:
•
•
Blue: scheduled event • Orange: anniversary
Red: to-do item Green: memo
4. Press <Save> to save the event.
•
64
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Select a date on the calendar to display the events
for the day.
Viewing an event in different mode
By default, the calendar appears in Month view mode.
2. Select an event to view its details.
Press <Options> and select View mode to change
the mode.
While viewing an event or the event list, press
<
Options> to access the following options:
View: display the event details.
Edit: edit the event.
Day view
•
You can view events for the selected date.
Select an event to view its details.
•
•
Create: add a new event.
The following icons will be displayed according to the
event’s type and status:
•
Send via: send the event via SMS, MMS,
e-mail, or Bluetooth.
•
•
•
•
Alarm set
•
View mode: change the view mode of the
calendar.
Recurring event
Completed to-do
•
•
Sort by: sort items by the type of event.
To-do priority; its colour indicates the priority
level (Red: high, Blue: normal, and Grey: low)
Delete: delete item(s) stored on the calendar by
using various deleting options.
•
•
Missed alarm events: view events whose alarms
you have missed.
Week view
You can view events (only for items stored for
Schedule) for the selected week.
Memory status: view the memory status for
items stored in the phone’s memory.
A cell on the timetable indicates the presence of event
information.
Select the cell that contains the event you want.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
Viewing a missed alarm event
Camera (Menu 8)
When you are unable to acknowledge an alarm, the
phone displays a missed alarm notification.
You can use the camera module embedded in your
phone to take photos and record videos.
•
•
Press <View> to view the corresponding event.
To access this menu, press <Menu> in Idle mode and
Press <Exit>.
select Camera, or press and hold [
].
Accessing missed event alarm
1. Press <Options> and select Missed alarm
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are
not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
events
.
2. Select an event.
3. Press <Confirm> to confirm and delete the event.
Using missed alarm options
Taking a photo
From the event list, press <Options> to access the
following options:
You can take photos in various modes using the
phone. The camera produces JPEG photos.
•
•
•
View: display the event details.
Delete: delete the event.
When you take a photo in direct sunlight or in bright
conditions, shadows may appear on the photo.
Delete all: delete all events.
1. Access the Camera menu to turn on the camera.
The image to be captured appears on the display.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Adjust the image by aiming the camera lens at the
subject.
Multi shot: take a series of action stills. Select the
number of photos the camera will take.
•
Press the left soft key to access the camera
options.
Use the keypad to change the camera settings
Mosaic shot: take several stills and save them in
one frame. Select the number of still images the
camera will take.
•
or switch to other modes.
3. Press [ to take a photo. The photo is saved in
the Photos folder.
ꢀp. 68
•
•
Effects: change the colour tone or apply a special
effect to photos to be taken in normal mode.
]
Frames: apply a decorative frame to photos to be
taken in normal mode.
4. To
Press
Options>.
•
•
Flash: determine the flash use.
use photo options
delete the photo
<
ꢀ
p. 68
Timer: set a time delay before the camera takes a
photo.
[C] and then <Yes>.
•
•
Go to photos: go to the Photos folder.
return to Capture mode
<Preview>.
Settings: change the default settings for taking a
photo.
Using camera options in Capture mode
Size: select an image size.
In Capture mode, press the left soft key to access the
following options:
Quality: select an image quality setting.
Viewfinder mode: select a preview screen.
Shutter sound: select the sound that you hear
•
•
Record video: switch to Record mode.
Shooting mode: take a photo in the following
modes:
when you press the shutter release, [
].
•
Short cuts: view the functions of the keys you can
Single shot: take a photo in normal mode.
use.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
Using the keypad in Capture mode
Key
Function
You can use the keypad to customise your camera
settings in Capture mode.
[6]
Reduces the distortion on the image to
maximise detail and sharpness.
Key
Function
[7
[8
[9
[0
[
]
]
]
]
Selects a decorative frame.
Sets the timer.
[
[
]
]
Flips the image vertically.
Shows the mirror image.
Adjusts the brightness of the image.
Goes to the Photos folder.
Determines the flash use.
Changes the preview screen.
[Left/
Right]
]
[Up/
Zooms in or out.
Down]
Using photo options
[1]
[2]
[3]
[4]
[5]
Switches to Record mode.
ꢀp. 70
After saving a photo, press <Options> to access the
following options:
Changes the image size.
•
•
Take another: return to Capture mode.
Changes the image quality.
Changes the camera mode.
Send via: send the photo via MMS, e-mail, or
Bluetooth.
•
Set as: set the photo as your wallpaper for the
displays or as a caller ID image for a Phonebook
entry.
Changes the colour tone or applies a
special effect to the photo.
•
Delete: delete the photo.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
•
Rename: change the name of the photo.
Go to photos: go to the Photos folder.
•
•
Move to Favourite images: move the photo to
the Favourite images folder.
Slide show: display all photos in turn as a slide
show. You can select the rate at which the photos
cycle.
Protection: protect the photo from being deleted.
Properties: view the properties of the photo.
Viewing a photo
1. In Capture mode, press the left soft key and select
•
Share for bluetooth: set whether or not to
prevent this file from being accessed from other
Bluetooth devices.
Go to photos
.
2. Scroll to a photo and press [ ].
•
•
Protection: protect the photo from being deleted.
While viewing a photo or the photo list, press
Properties: view the properties of the photo.
<
Options> to access the following options:
List: return the screen to the photo list.
View: view the photo on the full screen.
Taking a photo with the phone closed
1. Press and hold [
2. If necessary, press [
•
].
•
] to highlight
.
•
Send via: send the photo via MMS, e-mail, or
Bluetooth.
3. Adjust the image by aiming the camera lens at the
subject.
•
Set as: set the photo as your wallpaper for the
displays or as a caller ID image for a Phonebook
entry.
4. To
flip the image vertically
Press
[
[
].
].
•
•
Delete: delete the photo.
show the mirror image
turn the flash on or off
Rename: change the name of the photo.
and hold [
/
].
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
4. Press [
]
or the right soft key to stop recording.
4. To
Press
The video is automatically saved in the Video
clips folder.
adjust the brightness of
the image
[
].
5. To
Press
zoom in or out
[
].
play back the video clip
use the video options
delete the video clip
return to Record mode
[
].
5. Press [
]
to take a photo. The photo is
<
Options>.ꢀp. 72
automatically saved in the Photos folder.
[C
] and then <Yes>.
Recording a video
<
Preview>.
You can record a video of what is displayed on the
camera screen and save it.
Using camera options in Record mode
1. In Capture mode, press [1].
In Record mode, press the left soft key to access the
following options:
2. Aim the camera lens at the subject to adjust the
image.
•
•
Take photo: switch to Capture mode.
•
Press the left soft key to access the camera
options.
Effects: change the colour tone or apply a special
effect to a video.
•
Use the keypad to change the camera settings
or switch to other modes.
•
•
Flash: determine the flash use.
ꢀp. 71
Timer: set a time delay before the camera starts
recording.
3. Press [ to start recording.
]
•
Go to videos: go to the Video clips folder.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Settings: change the following settings for
recording a video:
Keys
Function
[
]
Shows the mirror image.
Adjusts the brightness of the image.
Recording mode: select a video recording mode.
[Left/
Right]
Select Limit for Message to record a video
suitable for an MMS or e-mail message. The video
clip is saved in 3GP format.
[Up/
Zooms in or out.
Select Normal to record a video within the limit of
Down]
the currently available memory.
[1]
[2]
[3]
[4]
[5]
Switches to Capture mode.
ꢀp. 66
Size: select a frame size.
Changes the frame size.
Video quality: select an image quality setting.
Screen mode: select a preview screen.
Audio record: record audio with a video clip.
Changes the image quality.
Changes the video recording mode.
•
Short cuts: view the functions of the keys you can
use.
Changes the colour tone or applies a special
effect to the photo.
Using the keypad in Record mode
[
6
]
Reduces the distortion on the image to
maximise detail and sharpness.
You can use the keypad to customise your camera
settings in Record mode:
[7
[8
[9
]
]
]
Mutes or unmutes the audio.
Sets the timer.
Keys
Function
[
]
Flips the image vertically.
Goes to the Video clips folder.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
Playing a video clip
Keys
Function
1. In Record mode, press the left soft key and select
[0]
Determines the flash use.
Go to videos
.
[
]
Changes the preview screen.
2. Scroll to a video clip and press [ ].
During playback, use the following buttons on the
display:
Using video options
After saving a video clip, press <Options> to access
the following options:
Keys
Function
[
]
Pauses/resumes playback.
Stops playback.
•
•
Record another: return to Record mode.
Send via: send the video clip via MMS, e-mail, or
Bluetooth.
[Down]
[Left]
Skips backward through a file.
Skips forward through a file.
Adjusts the volume.
•
Set as wallpaper: set the video clip, if saved for
adding it to MMS messages or e-mails, as your
wallpaper for the idle screen.
[Right]
[
/
]
•
•
•
•
Delete: delete the video clip.
Rename: change the name of the video clip.
Go to videos: go to the Video clips folder.
3. Press <Options> to access the following options:
•
•
List: return to the video clip list.
Send via: send the video clip via MMS, e-mail,
or Bluetooth.
Protection: protect the video clip from being
deleted.
•
Set as wallpaper: set the video clip, if saved
for adding it to MMS messages or e-mails, as
your wallpaper for the idle screen.
•
Properties: view the properties of the video clip.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
Delete: delete the video clip.
4. To
adjust the brightness of
Press
Rename: change the name of the video clip.
Move to Favourite videos: move the video
clip to the Favourite videos folder.
Share for bluetooth: set whether or not to
prevent this file from being accessed from
other Bluetooth devices.
Protection: protect the video clip from being
deleted.
Properties: view the properties of the video
clip.
[
].
the image
zoom in or out
[
].
•
5. Press [
6. Press [
]
]
to start recording.
to stop recording. The video clip is
•
•
automatically saved in the Video clips folder.
Settings (Menu 9)
Use this menu to customise your phone settings. You
can also reset the settings to their default values.
Recording a video with the phone closed
1. Press and hold [
2. If necessary, press [
].
To access this menu, press <Menu> in Idle mode and
] to highlight
.
select Settings
.
3. Adjust the image by aiming the camera lens at the
subject.
Time & Date (Menu 9.1)
4. To
flip the image vertically
Press
Use this menu to change the time and date displayed
on your phone. Before setting the time and date,
specify your time zone in the World time menu.
[
[
].
].
show the mirror image
turn the flash on or off
ꢀp. 40
and hold [
\
].
•
Set time: enter the current time.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
•
AM/PM: select AM or PM in 12-hour time format.
Time format: select time format.
Assigning a shortcut menu
•
•
•
1. Select a key to be used as a shortcut key and press
[
].
Set date: enter the current date.
2. Select the menu to be assigned to the key.
Using shortcut options
Starting day of calendar: set which day of the
week the calendar starts with.
Press <Options> to access the following options:
Phone settings (Menu 9.2)
•
•
Change: assign or change a shortcut menu.
Many different features of your phone’s system can be
customised to suit your preferences.
Remove: deactivate the shortcut assignment to
the selected key.
Language (Menu 9.2.1)
•
Remove all: deactivate all shortcut assignments.
Use this menu to select one of several languages for
the display text.
Extra settings (Menu 9.2.4)
You can turn the automatic redialling or answering
feature on or off, and lock the external keys.
Greeting message (Menu 9.2.2)
Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
•
Auto redial: set the phone to make up to ten
attempts to redial a phone number after an
unsuccessful call.
Short cut (Menu 9.2.3)
•
Active folder: answer an incoming call by opening
the phone.
You can use the Navigation keys as shortcut keys to
access specific menus directly from Idle mode. Use
this menu to assign a shortcut to a key.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Anykey answer: answer an incoming call by
pressing any key, except [ ] or <Reject>.
•
•
Text colour: select the text colour.
Graphic logo: set the phone to display the service
provider’s logo instead of its name, if you have
downloaded it.
When this option is not selected, you must press
[
] or <Accept> to answer a call.
Cover keypad lock: lock the exposed keys to
keep accidental presses from affecting your
phone’s operation when the phone is closed.
Skin (Menu 9.3.2)
You can select a skin colour for Menu mode.
LCD brightness (Menu 9.3.3)
Display settings (Menu 9.3)
You can adjust the brightness of the display for
varying lighting conditions.
Use this menu to change settings for the display and
light.
Back light (Menu 9.3.4)
Wallpaper (Menu 9.3.1)
You can select the length of time the backlight stays
on and the display is on in Dim mode, in which the
backlight is off.
You can set up the idle screen on both displays.
•
•
•
Main display: select an image or video clip to be
displayed on the main display.
•
Main LCD on: select the length of time the
backlight is on.
Cover display: select an image to be displayed on
the external display.
•
Main LCD dim: select the length of time the
display is in Dim mode after the backlight turns off.
After a specified time, the display turns off.
Text position: select a text position on the
display. If you don’t want to display text in Idle
•
Show cover indicators: set whether or not the
cover display icons are shown on the external
display.
mode, select Off
.
•
Text mode: select a text mode.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
Message tone (Menu 9.4.3)
Sound settings (Menu 9.4)
Use this menu to customise various sound settings.
Incoming call (Menu 9.4.1)
Use this menu to set up the ringer for incoming SMS
messages, MMS messages, e-mails, and CB
messages.
Use this menu to select a volume and alert type for
incoming calls.
•
•
Tone: select one of several message tones.
Alert type: specify how you are to be informed of
any incoming messages.
•
•
•
Ringtone: select a ring tone for the call ringer.
Volume: select a ringer volume.
•
Repetition: specify how often the phone informs
you of a new message.
Alert type: specify how you are to be informed of
incoming calls.
Power on/off (Menu 9.4.4)
Melody: the phone rings using the selected ring
tone.
Use this menu to select the melody that the phone
sounds when it is switched on or off.
Vibration: the phone vibrates but not rings.
Folder tone (Menu 9.4.5)
Vibration then melody: the phone vibrates three
times and then starts ringing.
Use this menu to select the tone that the phone
sounds when you open or close the phone.
Keypad tone (Menu 9.4.2)
Use this menu to select the tone that the phone
sounds when you press a key.
You can adjust the keypad tone volume using
[
/
]
in Idle mode.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Quiet mode (Menu 9.4.6)
Network services (Menu 9.5)
Use this menu to set how the phone acts to alert you
to a specific event in Quiet mode, instead of making
sounds.
Use this menu to access network services. Please
contact your service provider to check their availability
and subscribe to them, if you wish.
•
•
Vibration: set the phone to vibrate.
Call diverting (Menu 9.5.1)
Mute: mute all sound settings.
This network service reroutes incoming calls to a
phone number that you specify.
Extra tones (Menu 9.4.7)
Use this menu to customise additional tones for the
phone.
1. Select a call diverting option:
•
•
Divert always: divert all calls.
Busy: divert calls when you are on another
call.
•
Minute minder: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
•
•
No reply: divert calls when you do not answer
the phone.
Unreachable: divert calls when you are not in
an area covered by your service provider or
when your phone is switched off.
Cancel all: cancel all call diverting options.
•
•
Connection tone: set the phone to beep when it
is connected to the system.
Alert on call: set the phone to beep when you
receive a new message or when the time for an
alarm comes during a call.
•
2. Select the type of calls to be diverted.
•
Error tone: set the phone to beep when you have
made a mistake or something wrong happens on
the phone.
3. To activate call diverting, select Activate
.
Otherwise, select Deactivate
.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
4. Move to the Divert to line.
•
•
Cancel all: cancel all call barring settings,
allowing calls to be sent and received normally.
Change barring password: change the call
barring password obtained from your service
provider.
5. Enter the number to which calls are to be diverted
and press <Select>.
6. If you selected No reply, move to the Seconds
line and select the length of time the network
delays before diverting a call.
2. Select the type of calls to be barred.
3. Select Activate. To deactivate call barring, select
Call barring (Menu 9.5.2)
Deactivate
.
This network service allows you to restrict your calls.
1. Select a call barring option:
4. Enter the call barring password supplied by your
service provider and press <Select>.
•
•
•
All outgoing: prohibit all outgoing calls.
International: prohibit international calls.
International except to home: only allow
calls to numbers within the current country
when you are abroad, and to your home
country, defined as where your home network
provider is located.
Call waiting (Menu 9.5.3)
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which call waiting option
will apply.
2. Select Activate and press <Select>.
•
•
All incoming: prohibit incoming calls.
Incoming while abroad: prohibit incoming
calls when you use your phone outside of your
home country.
To deactivate call waiting, select Deactivate
.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Network selection (Menu 9.5.4)
Voice mail server (Menu 9.5.6)
This network service allows you to either automatically
or manually select the network to be used while
roaming outside of your home area.
Use this menu to store the number of the voice mail
server and access your voice mails.
You must enter the voice server number before you
can access your voice mails. Your service provider
can give the voice server number.
You can select a network other than your home
network only if there is a valid roaming agreement
between the two.
•
•
Connect to voice server: connect to the voice
mail server to allow you to listen to your
messages. You can also connect to the voice mail
•
Automatic: connect to the first available network
when roaming.
•
Manual: select the network you want.
server by pressing and holding [1] in Idle mode.
Voice server number: enter the voice mail
server number.
Caller ID (Menu 9.5.5)
This network service allows you to prevent your phone
number from being displayed on the phone of the
person being called. However, some networks do not
allow the user to change this setting.
Closed user group (Menu 9.5.7)
Use this menu to set incoming and outgoing calls to be
restricted to a selected user group. For details about
how to create a closed user group, contact your
service provider.
•
•
•
Default: use the default setting provided by the
network.
Hide number: ensure your number does not
display on the other person’s phone.
•
Index list: add, delete, or activate CUG index
numbers. Press <Options> to access the options
for setting up an index list.
Send number: send your number each time you
make a call.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
•
Outside access: enable calls to numbers other
than those in the Closed user group. This feature
depends on the nature of your CUG subscription.
When you select a new band, your phone
automatically searches for all available networks. Your
phone registers with a preferred network within the
band.
•
•
Default group: enable the default CUG, if you
have set one with your service provider. When
making a call, you are given the option of using
your default CUG, instead of selecting one from the
list.
Bluetooth (Menu 9.6)
Use this menu to activate the Bluetooth feature.
• You cannot use the Bluetooth feature while using
multimedia features such as voice recorder,
camera, and Music player, or vice versa.
• Some devices may not be compatible with your
phone.
Deactivate: deactivate the CUG function, if the
default group is enabled or a CUG index is
selected.
Band selection (Menu 9.5.8)
For the phone to make and receive phone calls, it
must register with an available network. Your phone
can handle any of the following types of networks:
GSM 1900 and Combined GSM 900/1800.
Using the Bluetooth feature, you can connect the
phone wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or control
the phone remotely.
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you may need to change to an
appropriate band.
Bluetooth technology allows free wireless connections
between all Bluetooth-compliant devices within a
range of 10 meters. Since the devices communicate
using radio waves, they do not need to be in line of
sight to each other.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Select Search new device
.
Setting up the Bluetooth feature
If you have searched for devices before, the phone
displays More devices along with the devices you
have searched for previously. To search for new
The Bluetooth menu provides the following options:
•
•
•
•
Activation: activate or deactivate the Bluetooth
feature.
devices, select More devices
.
My devices: search for connectable Bluetooth
devices.
After searching, a list of devices to which you can
connect displays. The following icons indicate the
kind of device:
My phone’s visibility: allow other Bluetooth
devices to search for your phone.
•
Hands-free or
headset
•
Mobile phone
My phone’s name: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
•
•
Computer
Printer
•
•
PDA
Unknown device
•
•
Secure mode: determine if the phone asks for
your confirmation when other devices access your
data.
The colour of the icon indicates the status of the
the device:
Bluetooth services: display available Bluetooth
services.
•
•
•
Grey for unpaired devices
Blue for paired devices
Red for devices that are currently connected to
your phone
Searching for and pairing with a Bluetooth
device
1. From the Bluetooth setting options, select My
3. Select a device.
devices
.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
4. Enter a Bluetooth PIN code and press <OK>. This
code is used just once and you don’t need to
memorise it.
•
Browse files: search for data from the device
and import data directly to your phone.
Service list: refresh the Bluetooth service list.
Rename: rename the paired device.
•
•
•
When the owner of the other device enters the
same code, pairing is complete.
Authorise/Unauthorised device: determine
whether or not the phone asks you to permit
connection when other devices try to connect
to your phone.
Some devices, especially headsets or hands-free
car kits, may have a fixed Bluetooth PIN, such as
0000. If the other device has a code, you must
enter it.
•
Delete: remove the device from the device list.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
Using device options
1. From the device list, scroll to a device you want.
2. Select the application in which the item you want
to send is stored.
2. If your phone didn’t find Bluetooth services for the
selected device, press <Select>.
3. Scroll to the item you want and press <Options>.
3. Press <Options> to access the following options:
4. Select Send via
→
Bluetooth.
Options may vary depending on the paired
device.
The phone searches for devices within range and
displays a list of available devices.
•
•
Connect: connect to the currently selected
device.
Disconnect: end the connection with the
device.
5. Select a device.
6. If necessary, enter the Bluetooth PIN needed for
pairing and press <OK>.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving data via Bluetooth
Change PIN (Menu 9.7.2)
To receive data via Bluetooth, your phone’s Bluetooth
feature must be active.
Use this menu to change your PIN. The PIN check
feature must be enabled to use this feature.
If an unauthorised Bluetooth device sends data to your
phone, the phone displays a confirmation message. To
receive data, press <Yes>.
Phone lock (Menu 9.7.3)
This feature locks the phone from unauthorised use.
When this feature is enabled, you must enter a 4- to
8-digit phone password each time the phone is
switched on.
Security (Menu 9.7)
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
The password is preset to 00000000. To change the
password, use the Change password menu.
Change password (Menu 9.7.4)
If you enter an incorrect PIN /PIN 2 three times in
succession, the SIM card is blocked. To unblock it
you need to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are supplied by your
network operator.
Use this menu to change your phone password. The
password is preset to 00000000
.
Privacy (Menu 9.7.5)
Use this menu to lock all menu functions on the
phone, except for call functions.
PIN check (Menu 9.7.1)
The 4- to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
When this feature is enabled, you must enter the
phone password to access menu functions. The
password is preset to 00000000
.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu functions
SIM lock (Menu 9.7.6)
Connection settings (Menu 9.8)
The SIM lock feature allows your phone to work only
with the current SIM by assigning a SIM lock code. You
must enter the SIM lock code to use a different SIM
card.
Use this menu to create and customise the profiles
containing the settings for connecting your phone to
the network. You need these settings to use the WAP
browser or send MMS messages or e-mails.
FDN mode (Menu 9.7.7)
Your phone is suited for connecting to the network
by default. If you change the settings without first
checking with your service provider, the WAP, MMS,
and e-mail features may not work properly.
If supported by your SIM card, Fixed Dialling Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored in
the SIM card. To use this feature, you must enter your
PIN2.
Creating a profile
1. Press <New> and specify following information:
•
•
Profile name: enter a profile name.
Home URL: enter the address of the WAP
home page of your service provider.
Proxy: activate or deactivate the proxy server.
When this option is activated, the IP address
and Port options are activated.
DNS: activate or deactivate the DNS address.
When this option is selected, DNS1 and DNS2
are activated.
Change PIN2 (Menu 9.7.8)
If supported by your SIM card, the change PIN2
feature changes your current PIN2.
•
•
84
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Bearer: select the network bearer type.
Advanced settings: change the advanced
options. Depending on the bearer setting,
available options vary.
Using profile options
Press <Options> to access the following options:
•
•
•
Edit: edit the profile.
Delete: delete the profile.
When the bearer is set to GPRS
:
Add new connection: add a new profile.
APN: enter the access point name.
Login ID: enter the login ID.
Reset settings (Menu 9.9)
Password: enter the login password.
Use this menu to reset the phone settings, display
settings, and sound settings individually. You can also
reset all the settings in your phone at the same time.
When the bearer is set to GSM
:
Dial number: enter the PPP phone number.
Login ID: enter the login ID.
1. Press [ ] to check the setting category(ies) to be
reset.
Password: enter the login password.
2. Press <Reset> to reset the marked items.
3. Press <Yes> to confirm the reset.
Data call type: select a call type for data
transmission.
4. Enter the phone password and press <OK>.
2. Press <Save> to save the profile.
The password is preset to 00000000. You can
change this password
ꢀp. 83
85
Download from Www.Somanuals.com. All Manuals Search And Download.
“Enter PUK”
The PIN code has been entered incorrectly three
Solve problems
•
times in succession, and the phone is now blocked.
Enter the PUK supplied by your service provider.
Help and personal needs
To save the time and expense of an unnecessary service
call, perform the simple checks in this section before
contacting a service professional.
“No service,” “Network failure,” or “Not done”
displays
When you switch on your phone, the following
messages may appear:
•
The network connection has been lost. You may be
in a weak signal area. Move and try again.
•
You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
“Insert SIM card”
•
Be sure that the SIM card is correctly installed.
“Enter password”
You have entered a number but it was not
dialled
•
•
•
The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
Be sure that you have pressed [
].
Be sure you have accessed the right cellular
network.
“Enter PIN”
•
You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
•
Be sure that you have not set an outgoing call
barring option.
•
The PIN check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Try moving the phone slightly or moving closer to a
window if you are in a building.
Your correspondent cannot reach you
•
•
•
Be sure your phone is switched on. ([ ] pressed
for more than one second.)
No number is dialled when you re-call a
Phonebook entry
•
Be sure you are accessing the correct cellular
network.
Use the Contacts list feature to ensure the number
has been stored correctly.
Be sure that you have not set an incoming call
barring option.
•
Re-store the number, if necessary.
Your correspondent cannot hear you speaking
If the above guidelines do not help you to
solve the problem, take note of:
•
•
Be sure you have switched on the microphone.
•
•
•
The model and serial numbers of your phone
Your warranty details
Be sure you are holding the phone close enough to
your mouth. The microphone is located at the
bottom of the phone.
A clear description of the problem
The phone starts beeping and “Low battery”
flashes on the display
Then contact your local dealer or Samsung after-sales
service.
•
Your battery is insufficiently charged. Recharge the
battery.
The audio quality of the call is poor
Check the signal strength indicator on the display
). The number of bars indicates the signal
strength from strong ( ) to weak ( ).
•
(
87
Download from Www.Somanuals.com. All Manuals Search And Download.
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple
power levels so as to use only the power required to reach
the network. In general, the closer you are to a base
station, the lower the power output of the phone.
Health and safety information
SAR certification information
This phone meets European Union (EU) requirements
concerning exposure to radio waves.
Your mobile phone is a radio transmitter and receiver. It is
designed and manufactured to not exceed the limits for
exposure to radio-frequency (RF) energy, as
recommended by the EU Council. These limits are part of
comprehensive guidelines and establish permitted levels
of RF energy for the general population. The guidelines
were developed by independent scientific organisations
through the periodic and thorough evaluation of scientific
studies. The limits include a substantial safety margin
designed to ensure the safety of all persons, regardless of
age and health.
Before a new model phone is available for sale to the
public, compliance with the European R&TTE Directive
must be shown. This directive includes as one of its
essential requirements the protection of the health and
safety of the user and any other person.
The exposure standard for mobile phones employs a unit
of measurement known as Specific Absorption Rate (SAR).
The SAR limit recommended by the EU Council is 2.0W/
kg.*
*
The SAR limit for mobile phones used by the public is 2.0
watts/kilogram (W/kg) averaged over ten grams of body tis-
sue. The limit incorporates a substantial margin of safety to
give additional protection for the public and to account for any
variations in measurements. The SAR values may vary,
depending on national reporting requirements and the network
band.
The highest SAR value for this model phone was 0.664 W/
kg.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Extreme temperatures will affect the charging capacity
of your battery: it may require cooling or warming
first.
Do not leave the battery in hot or cold places because
the capacity and lifetime of the battery will be
reduced. Try to keep the battery at room temperature.
A phone with a hot or cold battery may not work
temporarily, even when the battery is fully charged.
Li-ion batteries are particularly affected by
Precautions when using batteries
•
Never use a charger or battery that is damaged in any
way.
•
•
Use the battery only for its intended purpose.
If you use the phone near the network’s base station,
it uses less power. Talk and standby time are greatly
affected by the signal strength on the cellular network
and the parameters set by the network operator.
temperatures below 0°C (32°F).
•
Battery charging time depends on the remaining
battery charge, the type of battery, and the charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out. When
the operation time is noticeably shorter than normal, it
is time to buy a new battery.
•
•
Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object like a coin,
clip or pen causes a direct connection between the +
and – terminals of the battery (metal strips on the
battery). For example, do not carry a spare battery in
a pocket or bag where the battery may contact metal
objects. Short-circuiting the terminals may damage
the battery or the object causing the short-circuiting.
•
•
If left unused, a fully charged battery will discharge
itself over time.
Use only Samsung-approved batteries, and recharge
your battery only with Samsung-approved chargers.
Disconnect the charger from the power source when it
is not in use. Do not leave the battery connected to a
charger for more than a week, since overcharging may
shorten its life.
Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and safety information
Road safety
Electronic devices
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
When you are driving a car, driving is your first
responsibility. When using your wireless phone while
driving, follow local regulations in the country or region
you are in.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations
are consistent with the independent research and
recommendations of Wireless Technology Research. If you
have any reason to suspect that interference is taking
place, switch off your phone immediately.
Operating environment
Remember to follow any special regulations in force in the
area you are in, and always switch off your phone
whenever it is forbidden to use it, or when it may cause
interference or danger.
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
Hearing aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
As with other mobile radio transmitting equipment, users
are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is
recommended that the equipment should only be used in
the normal operating position (held to your ear with the
antenna pointing over your shoulder).
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Other medical devices
Potentially explosive environments
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is
adequately shielded from external RF energy.
Switch off your phone when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Your physician may be able to assist you in obtaining this
information.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting operations are
in progress.
Switch off your phone in health care facilities when
regulations posted in these areas instruct you to do so.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its representative regarding your
vehicle.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include the areas
below decks on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas, such as
propane or butane, areas where the air contains chemicals
or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted facilities
Switch off your phone in any facility where posted notices
require you to do so.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Health and safety information
Emergency calls
Other important safety information
•
Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the
phone, its parts, or accessories.
For vehicles equipped with an air bag, remember that
an air bag inflates with great force. Do not place
objects, including installed or portable wireless
equipment, in the area over the air bag or in the air
bag deployment area. Improperly installed wireless
equipment could result in serious injury if the air bag
inflates.
This phone, like any wireless phone, operates using radio
signals, wireless, and landline networks as well as user-
programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
•
•
communications like medical emergencies.
To make or receive calls, the phone must be switched on
and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
•
To make an emergency call:
1. Switch on the phone.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
•
•
Switch off your phone before boarding an aircraft. It is
dangerous and illegal to use wireless phones in an
aircraft because they can interfere with the operation
of the aircraft.
Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
3. Press
[
].
Certain features like Call Barring may need to be
deactivated before you can make an emergency call.
Consult this document and your local cellular service
provider.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it with a
soft cloth slightly dampened in a mild soap-and-water
solution.
Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
Do not put the phone in or on heating devices, such as
a microwave oven, stove, or radiator. The phone may
explode when overheated.
Use only the supplied or an approved replacement
antenna. Unauthorised antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
If the phone, battery, charger, or any accessory is not
working properly, take it to your nearest qualified
service facility. The personnel there will assist you, and
if necessary, arrange for service.
Care and maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years.
•
•
•
Keep the phone and all its parts and accessories out of
the reach of small children.
•
Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
•
•
•
Do not use the phone with a wet hand. Doing so may
cause an electric shock to you or damage to the
phone.
•
•
Do not use or store the phone in dusty, dirty areas, as
its moving parts may be damaged.
Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
•
Do not store the phone in cold areas. When the phone
warms up to its normal operating temperature,
moisture can form inside the phone, which may
damage the phone’s electronic circuit boards.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
CB (Cell Broadcast)messages •
51
Dialled calls • 30
Display
language • 74
settings • 75
Diverting, calls • 77
DTMF tones, send • 28
C
Index
A
AB mode, text input • 22
Alarm • 40
Answering
Calculator • 42
Calendar • 62
Call cost • 31
Call records
dialled • 30
missed • 30
received • 30
Call time • 30
Caller group
creating • 33
managing • 33
Caller ID • 79
Calls
Characters, enter • 22
Conference call • 28
Connection tone • 77
Converter • 42
Creating messages
e-mail • 47
MMS • 46
SMS • 46
Creating organiser
anniversaries • 64
events • 63
call • 25
E
second call • 26
Anykey answer • 75
Auto redial • 74
E-mails
creating/sending • 47
deleting • 53
setting • 57
B
viewing • 52
Backlight time, set • 75
Band selection • 80
Barring, calls • 78
Battery
Emergency calls • 92
External speaker • 27
memos • 64
tasks • 64
answering • 25
barring • 78
diverting • 77
holding • 26
redialling • 24
rejecting • 25
transferring • 27
waiting • 78
Camera
F
D
charging • 7
FDN (Fixed Dialling Number)
mode • 84
Deleting
low indicator • 8
precautions • 89
Bluetooth
call records • 29
e-mails • 53
events • 65
messages • 49
missed alarms • 66
phonebook 35
photos • 69
Forwarding
e-mails • 53
MMS messages • 50
receiving, data • 83
sending, data • 82
settings • 81
G
Broadcast messages • 51
Browser, WAP • 43
Games • 36
options • 67
photos • 66
videos • 70
Greeting message • 74
video clips • 73
Delivery reports, message • 55
94
Download from Www.Somanuals.com. All Manuals Search And Download.
microphone • 27
My name card • 34
unpacking • 6
Phonebook
H
M
Health and safety • 88
Holding, call • 26
Memory status
copying • 32
deleting • 35
editing • 32
managing • 35
options • 32
downloaded items • 62
N
phonebook 35
Message tone • 76
Messages
Names
I
entering • 22
Icons, description • 10
Images, downloaded • 59
Inbox, messages
e-mail • 52
searching • 31
Network band, select • 80
Network selection • 79
Network services • 77
cell broadcast • 51
e-mail • 47
greeting • 74
MMS • 46
SMS • 45
speed-dialling • 33
Photos
MMS • 50
SMS • 49
deleting • 69
taking • 66
viewing • 69
O
International calls • 24
Internet • 43
web • 51
Outbox, messages • 51
Own number • 34
PIM sync
Minute minder • 77
Missed alarm events • 66
Missed calls • 30
MMS messages
creating/sending • 46
deleting • 50
creating a profile • 41
starting • 41
PIN, change • 83
PIN2, change • 84
Power on/off tone • 76
Privacy • 83
K
P
Key tone volume • 76
Keypad tones
selecting • 76
sending • 27
Password
call barring • 78
phone • 83
Phone
setting • 55
viewing • 48
care and maintenance •
93
display • 10
icons • 10
locking • 83
password • 83
resetting • 85
switching on/off • 8
L
Problems, solve • 86
Language, select • 74
Last number, redial • 24
Locking
MP3 player
R
options • 37
playing • 37
Received calls • 30
Received messages
e-mail • 52
menu functions • 83
phone • 83
SIM card • 84
Multi-party calls • 28
Music, downloaded • 60
Muting
Recording
videos • 70
voice memos • 39
Low battery indicator • 8
key tones • 27
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Redialling
Switching on/off
microphone • 27
phone • 8
Voice memos
playing • 39
recording • 39
Voice recorder
automatically • 74
manually • 24
Resetting phone • 85
Ringer
incoming calls • 76
messages • 76
Road safety • 90
Roaming • 79
T
playing • 39
recording • 39
Templates • 54
Text input mode, change • 22
Text, enter • 22
Timer • 43
W
Waiting call • 78
WAP browser
access • 43
Tone
S
connect • 77
Safety
folder • 76
keypad • 76
message • 76
minute minder • 77
power on/off • 76
Transfer • 27
bookmarks • 44
cache, clear • 45
World time • 40
information • 88
Security, calls • 83
Sent messages • 52
SIM card
inserting • 7
locking • 84
V
SMS messages
creating/sending • 45
deleting • 49
Videos
deleting • 73
playing • 72
recording • 70
Voice mail server
connecting • 79
editing • 79
viewing • 49
Sound settings • 76
Sounds, downloaded • 61
Speed-dial • 33
Stopwatch • 43
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
