DUAL BAND
GSM TELEPHONE
SGH-N620
OWNER’S MANUAL
Printed in Korea
Code No.: GH68-02493A
Eng. 10/01. Rev.1.0
World Wide Web
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Safety Precautions . . . . . . . . . . . . . . . .
7
9
Unpacking . . . . . . . . . . . . . . . . . . . . . .
Your Phone . . . . . . . . . . . . . . . . . . . . . 10
Phone Layout. . . . . . . . . . . . . . . . . . . . . . . . . . 10
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Service Light . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Getting Started . . . . . . . . . . . . . . . . . . 15
Installing the SIM Card and the Battery . . . 15
Charging a Battery . . . . . . . . . . . . . . . . . . . . . 18
Switching the Phone On/Off . . . . . . . . . . . . . 20
Call Functions . . . . . . . . . . . . . . . . . . . 22
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . 22
Adjusting the Volume . . . . . . . . . . . . . . . . . . . 24
Answering or Rejecting a Call . . . . . . . . . . . 25
Viewing Missed Calls. . . . . . . . . . . . . . . . . . . 26
In-Call Options . . . . . . . . . . . . . . . . . . . . . . . . 28
Entering Text . . . . . . . . . . . . . . . . . . . 35
Changing the Text Input Mode . . . . . . . . . . . 36
Using the T9 Mode . . . . . . . . . . . . . . . . . . . . . 36
Using the ABC Mode . . . . . . . . . . . . . . . . . . . 38
Using the Number Mode . . . . . . . . . . . . . . . . 40
Using the Symbolic Mode . . . . . . . . . . . . . . . 40
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents(continued)
Phonebook . . . . . . . . . . . . . . . . . . . . . 41
Storing a Phone Number with a Name . . . . 41
Phonebook Options . . . . . . . . . . . . . . . . . . . . 42
Speed-Dialling by SIM Memory Location . . 45
Searching for and Dialling a Number
Voice Functions . . . . . . . . . . . . . . . . . . 66
Voice Dial (Menu 3-1) . . . . . . . . . . . . . . . . . . . . 66
Voice Command (Menu 3-2) . . . . . . . . . . . . . . . 69
Voice Memo (Menu 3-3) . . . . . . . . . . . . . . . . . . 69
Voice Active (Menu 3-4) . . . . . . . . . . . . . . . . . . 71
AnswerPhone (Menu 3-5) . . . . . . . . . . . . . . . . . 72
in the Phonebook . . . . . . . . . . . . . . . . . . . . . . 46
Dialling a Number using the Service
Tones . . . . . . . . . . . . . . . . . . . . . . . . . 73
Ring Tone (Menu 4-1) . . . . . . . . . . . . . . . . . . . 73
Melody Composer (Menu 4-2). . . . . . . . . . . . 74
Ring Volume (Menu 4-3). . . . . . . . . . . . . . . . . 76
Alert Type (Menu 4-4). . . . . . . . . . . . . . . . . . . 76
Keypad Tone (Menu 4-5) . . . . . . . . . . . . . . . . 77
Message Tone (Menu 4-6) . . . . . . . . . . . . . . . 77
Error Tone (Menu 4-7). . . . . . . . . . . . . . . . . . . 78
Minute Minder (Menu 4-8). . . . . . . . . . . . . . . 78
Connect Tone (Menu 4-9). . . . . . . . . . . . . . . . 78
Directory or Information Numbers . . . . . . . 47
Selecting Functions and Options . . . . . . 48
Using the Menus . . . . . . . . . . . . . . . . . 50
Accessing Menu Functions by Scrolling . . . 50
Accessing Menu Functions by
Using Shortcuts . . . . . . . . . . . . . . . . . . . . . . . 51
Menu Structure. . . . . . . . . . . . . . . . . . . . . . . . 52
Call Records . . . . . . . . . . . . . . . . . . . . 55
Missed Calls (Menu 1-1) . . . . . . . . . . . . . . . . 55
Received Calls (Menu 1-2). . . . . . . . . . . . . . . 55
Dialled Calls (Menu 1-3). . . . . . . . . . . . . . . . . 56
Call Time (Menu 1-4). . . . . . . . . . . . . . . . . . . . 56
Call Cost (Menu 1-5) . . . . . . . . . . . . . . . . . . . . 57
Settings . . . . . . . . . . . . . . . . . . . . . . . 79
Phone Settings (Menu 5-1) . . . . . . . . . . . . . . 79
Network Services (Menu 5-2) . . . . . . . . . . . . 84
Security Settings (Menu 5-3). . . . . . . . . . . . . 93
LCD/LED Settings (Menu 5-4) . . . . . . . . . . . . 96
Browser Settings (Menu 5-5) . . . . . . . . . . . . 98
Messages . . . . . . . . . . . . . . . . . . . . . . 58
Voice Mail (Menu 2-1) . . . . . . . . . . . . . . . . . . 58
Read Messages (Menu 2-2). . . . . . . . . . . . . . 59
Write Messages (Menu 2-3) . . . . . . . . . . . . . 61
Preset Message List (Menu 2-4) . . . . . . . . . . 62
Set Up (Menu 2-5). . . . . . . . . . . . . . . . . . . . . . 62
Broadcast (Menu 2-6) . . . . . . . . . . . . . . . . . . 63
Picture Messages (Menu 2-7). . . . . . . . . . . . 64
Organiser . . . . . . . . . . . . . . . . . . . . . . 99
Scheduler (Menu 6-1). . . . . . . . . . . . . . . . . . . 99
Alarm (Menu 6-2) . . . . . . . . . . . . . . . . . . . . . . 101
Calculator (Menu 6-3). . . . . . . . . . . . . . . . . . . 103
World Time (Menu 6-4). . . . . . . . . . . . . . . . . . 105
Clock (Menu 6-5). . . . . . . . . . . . . . . . . . . . . . . 106
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Contents(continued)
Games . . . . . . . . . . . . . . . . . . . . . . . . 107
Squares (Menu 7-1) . . . . . . . . . . . . . . . . . . . . . 108
Fortress (Menu 7-2) . . . . . . . . . . . . . . . . . . . . . 109
Ice Cave (Menu 7-3) . . . . . . . . . . . . . . . . . . . . 110
Read these simple guidelines. Failure to comply with
them may be dangerous or illegal.
For more detailed safety information, see “Safety
Information” on page 127.
WWW Services . . . . . . . . . . . . . . . . . . 111
Home (Menu 8-1) . . . . . . . . . . . . . . . . . . . . . . . 111
Bookmark (Menu 8-2) . . . . . . . . . . . . . . . . . . . 112
Goto (Menu 8-3) . . . . . . . . . . . . . . . . . . . . . . . . 113
Navigating with the WAP Browser. . . . . . . . 113
Entering Text, Numbers, or Symbols . . . . . . . 115
Network Connection Information . . . . . . . . . 116
Road safety comes first
Do not use a hand-held phone while driving; park the
vehicle first. Remember that in some countries, it is
illegal to use a hand-held phone while driving.
Switch off when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Additional Services . . . . . . . . . . . . . . . 117
ALS (Alternate Line Service). . . . . . . . . . . . . 117
Switch off in aircraft
Mobile phones can cause interference. Using them
on aircraft is both illegal and dangerous.
Solving Problems . . . . . . . . . . . . . . . . . 119
Reference Information . . . . . . . . . . . . . 122
Access Codes . . . . . . . . . . . . . . . . . . . . . . . . 122
Using the Batteries . . . . . . . . . . . . . . . . . . . . 125
Safety Information . . . . . . . . . . . . . . . . . . . . . 127
Respect special regulations
Follow any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause interference
or danger (in a hospital for example).
Glossary . . . . . . . . . . . . . . . . . . . . . . 131
Index . . . . . . . . . . . . . . . . . . . . . . . . . 135
Quick Reference Card . . . . . . . . . . . . . . 139
Interference
All mobile phones may be subject to radio
interference, which may affect their performance.
7
6
Download from Www.Somanuals.com. All Manuals Search And Download.
S a f e t y P re c a u t io n s
Unpacking
Your package contains the following items.
Qualified service
Only qualified service personnel must repair cellular
equipment. Use only approved accessories and
batteries.
Use sensibly
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Phone
Travel Adapter
Emergency calls
Ensure that the phone is switched on and in service.
Enter the emergency number (112 or another official
emergency number) and press the
key. Give your
location. Do not end the call until given permission to
do so.
Battery
Hand Strap Owner’s Manual
End the call by pressing
.
IMPORTANT! Use only SAMSUNG-approved
accessories. The use of any other power accessory
will invalidate any approval or warranty applying to
the phone, and may be dangerous.
In addition, you can obtain the following accessories
for your phone from your local SAMSUNG dealer:
• Cigarette lighter adapter
• Simple hands-free car kit
• Standard battery
• Data kit
When you disconnect the power cord of any
accessory, grasp and pull the connector, not the cord.
• Ear-microphone*
* : Depending on the country, this accessory may be
supplied in the standard package.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Yo u r P h o n e
Your Phone
Soft keys
Perform the functions indicated by the text
above them (in the bottom line of the display).
Phone Layout
In the menu facility, scroll through the menu
options and phonebook memory.
allows you to access the Ring Tone menu
The following illustration shows the main elements
of your phone.
in idle mode.
allows you to access the
Voice dialling or Voice command when you set
the Voice Active option.
Deletes characters from the display.
In idle mode, allows you to access the WAP
Browser quickly.
Service light
Antenna
Makes or answers a call.
In idle mode, recalls the last number dialled.
In the menu facility, selects a menu function or
stores information that you have entered (such
as a name) in the phonebook.
Earpiece
Earphone jack
Ends a call. Also switches the phone on and
off when pressed and held.
Display
Volume keys
In the menu facility, returns to the idle mode
and cancels your input.
Enter numbers, letters and some special
characters.
When held down in idle mode, locks the
keypad manually.
When held down, toggles the Silent mode on
and off.(This feature is not available when
the phone is connected to a optional car kit.).
Microphone
During a call, adjust the earpiece volume.
In idle mode, adjust the key tone volume.
When you get a call, silent the ring tone
immediately.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Yo u r P h o n e
Yo u r P h o n e
Display
Display Layout
Icons
The display comprises three areas.
Signal strength: shows the received
signal strength. The greater the number
of bars, the better the signal strength.
Icons
Text and
graphic area
Service: appears when a call is in
progress.
Soft key
indications
New Message: appears when a new
text message has been received.
Area
Description
Displays various icons (see opposite).
New Voice Mail: appears when a new
voice mail message has been received.
First line
Middle lines Display messages, instructions and
any information that you enter
Vibrator on/Silent mode on: appears
when the Vibrate mode or Silent mode
is active.
(number to be dialled, for example).
Last line
Shows the functions currently
assigned to the two soft keys.Or
shows various types of information,
such as missed calls, call diverting
options, advice of charge information
or the keypad lock icon ( ). This
information varies, depending on
your SIM card, service provider or
current context.
Alarm on: appears when you set an
alarm.
Battery strength: shows the level of
your battery. The more bars you see, the
more power you have left.
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Yo u r P h o n e
Getting Started
Installing the SIM Card and the Battery
Backlight
The display and keypad are illuminated by a
backlight. When you press any key, the backlight
comes on.
When you subscribe to a cellular network, you are
provided with a SIM card loaded with your subscription
details (PIN, optional services available and so on).
To specify the length of time for which the backlight
is active, set the Backlight menu option (5-1-5); see
page 81 for further details.
• Keep all SIM cards out of the reach of small
children.
• The SIM card and its contacts can be easily
damaged by scratches or bending, so be careful
when handling, inserting or removing the card.
• Before installing the SIM card, always make sure
that the phone is switched off before removing the
battery.
Note When you are in lock mode, press and hold the
soft key to come on the backlight.
Service Light
There are several cases in which the service light
flashes.
1. If necessary, switch off the phone by holding
down
until the closing animation is displayed.
• When in service.
2. Remove the battery. To do so:
To activate or deactivate the service light, set the
Service Light menu option (5-1-6); see page 82.
To select the colour of the service light, set the
Service Colour menu option (5-4-4); see page 97.
À Press and hold down the catch above the
battery on the back of the phone
Á Slide the battery away, as shown
• When an SMS message is received (the light is
yellow, only if the Alert type set Light only.).
¬
• When the alarms rings.
•
• When you receive a call (the light is green by
default).
To change the colour, set the phonebook Colour
option; see page 45.
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge t t in g S t a rt e d
Ge t t in g S t a rt e d
5. Close the SIM card holder and slide the ivory-
coloured lock right.
3. Slide the ivory-coloured lock on the SIM card
holder left to unlock the holder. Lift the holder up.
6. Place the battery back on the phone. Slide the
battery up towards the catch until it locks into
place. Make sure that the battery is properly
installed before switching on the power.
4. Insert the SIM card, ensuring that the cut corner
faces top left and the gold contacts of the card
face into the phone.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge t t in g S t a rt e d
Ge t t in g S t a rt e d
Charging a Battery
Your phone is powered by a rechargeable Li-ion
battery. A travel adapter is provided with your phone.
Use only approved batteries and chargers. Ask your
local SAMSUNG dealer for further details.
3. When charging is finished, disconnect the adapter
from the power outlet and from the phone by
pressing the grey tabs on both sides of the
connector and pulling the connector out.
The phone can be used while the battery is charging.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
140minutes.
1. With the battery in position on the phone connect
the lead from the travel adapter to the bottom of
the phone. Check that the arrow on the lead
connector is facing towards the front of the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, you will hear a warning tone and a
message will be repeated at regular intervals on the
display:
** Warning **
Bat t e ry Low
2. Connect the adapter to a standard AC wall outlet.
When the battery is charging, the battery icon
in the top right-hand corner of the display fills
repeatedly.
When the battery becomes too weak for the phone
to operate, the phone switches off automatically.
Note: Do not remove the battery from the phone
while the travel adapter is connected to the
phone.
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Ge t t in g S t a rt e d
Ge t t in g S t a rt e d
Switching the Phone On/ Off
4. When you wish to switch the phone off, hold
down for more than two seconds.
1. Hold down
for more than one second to
switch the phone on.
Note: If “Insert SIM Card” appears on the display,
please check that the SIM card is correctly
inserted.
Note: If you want to switch the phone off in lock
mode, unlock the phone first by pressing left
soft key and pressing the
key.
2. If the phone asks for a password, key in the
password and press the OK soft key. The phone
password is factory set to 0000. For further
details, see page 122.
3. If the phone asks for a PIN, key in the PIN and
press the OK soft key. For further details, see
page 123.
The phone searches for your network and when it
finds it, the idle screen, illustrated below, is
displayed.
<SERVICE PROVIDER>
Sat 1 4 Mar 1 2 :5 7
Me nu
Pho ne Bo o k
Note: The display language is determined by the
SIM card inserted. To change the language,
use the Language menu option (5-1-3).See
page 80.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Ca ll Fu n c t io n s
Call Functions
Making a Call
When the idle screen is displayed, key in the area
Ending a Call
code and phone number and press
.
When you have finished your call, briefly press
.
Note: If you have set the Auto Redial option (5-1-7) to
ON (see page 82) and the person called does not
answer or the line is busy, the number is
Making a Call from the Phonebook
redialled automatically up to ten times.
You can store the names and phone numbers of the
people you call regularly in the SIM card memory and
phone memory, called the phonebook. You then
simply select the required name to recall the
associated number. For further details on the
Phonebook feature, refer to page 41.
Making International Calls
1. Press and hold down the
key.
The + international prefix appears.
2. Key in the country code, area code and phone
number and press
.
Redialling the Last Number
The phone stores the last 10 numbers dialled. To
recall any of these numbers, proceed as follows.
Correcting the Number
To clear...
Then...
1. If there are any characters on the display, press
The last digit
displayed
Press the
soft key.
or key
the
2. Press the
numbers dialled.
3. Use the and
numbers until the required number is displayed.
4. Press the key to dial the number displayed.
key to return to the idle mode.
key to access the list of the last
Any other digit
in the number
Press the
until the cursor ( x) is immedia-
keys to scroll through the
tely to the right of the digit to
be cleared. Press the
key. You can also insert a
soft
missing digit simply by pressing
the appropriate key.
The whole display Hold down the
soft key
for more than one second.
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Ca ll Fu n c t io n s
Ca ll Fu n c t io n s
Adjusting the Volume
Answering or Rejecting a Call
During a call, if you wish to adjust the earpiece
volume, use the volume key on the left side of the
phone.
When somebody calls you, the phone rings and the
phone icon in the middle of the screen flashes.
If the caller can be identified, the caller’s phone
number (or name if stored in your phonebook) is
displayed.
Answering a Call
There are two ways to answer an incoming call.
• Press the Accept soft key.
• When the Any-Key Answer menu option is set to
ON, press any key( except
or the Reject soft
key).
When you get a call, press the volume key to silent
the ring tone immediately.
Rejecting a Call
To reject a call, press
or the Reject soft key.
In idle mode, you can adjust the key tone volume
using the same keys.
Note When you have a call in lock mode, the lock
mode is deactivated automatically. When you
end the call the phone will be locked
automatically after the predetermined amount of
time.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Ca ll Fu n c t io n s
Ca ll Fu n c t io n s
Viewing Missed Calls
If you are unable to answer a call for any reason, you
can find out who was calling you, provided that this
service is available. In this way, you can call the
person back, if necessary.
Editing a Missed Call Number
1. Press the Options soft key.
2. Press
or
to highlight the Paste option.
The number of missed calls is displayed on the idle
screen immediately after the call was missed.
3. Press the Select soft key.
4. Change the number as required. Press
to move back through the number.
or
To view the missed call immediately, proceed as
follows.
5. To...
Call the number
Then press the...
1. Press the View soft key.
key.
The number corresponding to the most recent
missed call is displayed, if available.
Store the number
Save soft key and enter
the name and location
required (for further
2. To...
Scroll through the
Then press the...
details, refer to page 41).
or
key.
missed calls
Deleting a Missed Call
Call the number displayed
key.
1. Press the Options soft key.
2. Press or to highlight the Delete option.
3. Press the Select soft key.
Edit or delete a missed
call number
Options soft key
(see opposite).
You can press
feature.
at any time to exit the Missed Call
Note: You can access the Missed Call feature at any
time by selecting the Missed Calls menu option
(1-1); for further details, see page 55.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Ca ll Fu n c t io n s
Ca ll Fu n c t io n s
In-Call Options
Your phone provides a number of control functions
during a call. To access these functions during a call,
press the Options soft key.
Searching for a Number in the Phonebook
You can search for a number in the phonebook during
a call.
Switching the Microphone Off (Mute)
1. Press the Options soft key.
You can temporarily switch your phone’s microphone
off, so that the other party cannot hear you.
2. Press
option.
or
to highlight the Phonebook
Example: You wish to say something to another
person in the room but do not want the
other party to hear you.
3. Press the OK soft key.
4. Enter the start of the name that you wish to find
and press the Find soft key.
To switch the microphone off temporarily, proceed as
follows.
Note: You can also scroll through the phonebook
from the beginning, by pressing the Find
soft key directly.
1. Press the Options soft key.
2. Press
or
to highlight the Mute option.
The phonebook entries are listed, starting with
the first entry matching your input. This entry is
also highlighted.
3. Press the OK soft key.
Your correspondent can no longer hear you.
5. To view the highlighted entry, press the View soft
To switch the microphone back on, proceed as
follows.
key.
For a more detailed description of the Phonebook
feature, refer to page 41.
1. Press the Options soft key.
2. Press
option.
or
to highlight the Unmute
3. Press the OK soft key.
Your correspondent can hear you again.
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Ca ll Fu n c t io n s
Ca ll Fu n c t io n s
Putting a Call on Hold
Answering a Second Call
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can swap between the calls.
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and you have set the Call Waiting menu
option (5-2-3) to Activate (see page 89). You will be
notified of an incoming call by a call waiting tone.
To place a call on hold, press the Options soft key,
and select the Hold option. You can reactivate the
call whenever you want, by pressing the Retrieve
soft key.
To answer a call while you have a call in progress,
proceed as follows.
1. Press
to answer the incoming call.
The first call is automatically put on hold.
To make a call while you have a call in progress,
proceed as follows.
2. To switch between the two calls, press the Swap
1. Key in the phone number that you wish to dial or
look it up in the phonebook.
soft key.
To end a held call, press the Options soft key and
select the End held call option.
2. Press
to dial the second call.
The first call is automatically put on hold.
3. To end the current call, press
.
Or alternatively, proceed as follows.
You are automatically switched back to any held
calls.
1. Put the current call on hold by pressing the
Options soft key and selecting the Hold option.
2. Make the second call in the normal way.
To swap between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other party.
When you have finished, end each call normally by
pressing
.
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Ca ll Fu n c t io n s
Ca ll Fu n c t io n s
Making a Multiparty Call
A multiparty call is a network service that allows
up to six people to take part simultaneously in a
multiparty or conference call. For more information,
contact your service provider.
2. Highlight the required person, by pressing
or , followed by
.
3. Select Private.
Now you can talk privately with that person. The
other participants can continue to converse with
each other.
Setting up the Multiparty Call
1. Call the first participant in the normal way.
4. To return to the multiparty call, press the Options
soft key and select Join.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
All the multiparty call participants can now hear
each other.
3. To join the first participant to the multiparty call,
press the Options soft key and select the Join
option.
Dropping One Participant
1. Press the Options soft key and choose the
Select one option.
4. To add a new person to the multiparty call, call
the person in the normal way, then press the
Options soft key and select the Join option.
The list of call participants appears.
2. Highlight the required person, by pressing
You can add incoming callers by answering the call
and pressing Options, followed by Join. Repeat as
required.
or
, followed by
.
3. Select the Remove soft key.
The call is ended with that participant, but you
can continue to talk with the other participants.
Having a Private Conversation With One
Participant
4. End the multiparty call by pressing
.
1. Press the Options soft key and choose the
Select one option.
The list of call participants appears.
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Ca ll Fu n c t io n s
Entering Text
Muting/ Sending Key Tones
When storing a name in the phonebook, creating
your personal greeting or scheduling events in your
calendar, you will need to enter text.
These options allow you to turn the key tones off or
on. If the Mute keys option is selected, your phone
does not transmit the key tones.
You are provided with the following text input
modes.
Note: To communicate with answering machines or
computerised telephony systems, the Send
keys option must be selected.
T9 mode
This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has
more than one letter – when you press the
once, J, K or L may be displayed. The T9 mode
automatically compares your keystrokes with an
internal linguistic dictionary to determine the correct
word, thus requiring far fewer keystrokes than the
traditional ABC mode.
key
Using the SMS Service
If you receive an SMS (Short Message Service)
message during a call, the message icon (
appears in the display.
)
After you have finished your call, you can read the
message; refer to page 59 for further details.
ABC mode
This mode allows you to enter letters by pressing the
key labelled with the required letter once, twice or
three times until the letter is displayed.
Number mode
This mode allows you to enter numbers.
Symbolic mode
This mode allows you to enter special characters.
is a registered trademark of Tegic Communications, Inc.
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
En t e rin g Te xt
En t e rin g Te xt
Changing the Text Input Mode
1. When you are in the T9 predictive text input
mode, start entering a word by pressing keys
to . Press each key only once for one letter.
1. When you are in a field that allows characters to
be entered, you will notice the text input mode
indicator in the lower right corner of the display.
Example: to enter HELLO in the T9 English mode,
press and
,
,
,
.
The word that you are typing appears in the display.
It may change with each key that you press.
S a v e
Text input mode
indicator:
ABC: ABC mode
NUM: Number mode
: T9 mode
2. Enter the whole word before editing or deleting
any keystrokes.
3. If the word is correct, start entering the next
word.
SYM: Symbolic mode
Otherwise, press
repeatedly to display
alternate word choices for the keys that you have
pressed.
2. Press the right soft key.
The modes available are displayed.
Example: OF and ME both share the sequence
3. Scroll to the required mode, then press the Select
soft key.
,
. The phone displays the
most commonly used choice first.
4. Complete each word with a space by pressing
Using the T9 Mode
the
key.
To type words not found in the T9 mode, change the
text input mode to the ABC mode.
The T9 predictive text input mode allows you to enter
words easily with a minimum of key presses. As you
press each key, the phone selects a letter that makes
up the word that it thinks you are typing, based on a
built-in dictionary. As a new letter is added, the word
changes based on the key that you have pressed.
To delete letters, press
to erase entire words.
. Press and hold down
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
En t e rin g Te xt
En t e rin g Te xt
There are three shift options:
2. Select the other letters in the same way.
•
•
•
Lower Case (no shift indicator)
Initial Cap ( indicator)
Caps Lock ( indicator)
Note: The cursor moves to the right when you
press a different key. When entering the
same letter twice (or a different letter on the
same key), just wait for a few seconds for
the cursor to move right automatically, and
then select the next letter.
P
ress
one or more times to display the appro-
priate shift indicator and continue typing normally.
There are three shift options:
Me e t m e at
•
•
•
Lower Case (no shift indicator)
Initial Cap ( indicator)
Caps Lock ( indicator)
OK
ENG
Press the
key one or more times to display the
Shift indicator
appropriate shift indicator in the bottom line of the
display and continue typing normally.
Note: To exit the text input mode without saving your
input, press . The phone returns to the
To insert a space, press the
key.
previous menu level.
To delete letters, press the
key. Press and hold
down the
key to clear the display.
Using the ABC Mode
Use the
to
keys to enter your text.
1. Press the key labelled with the required letter:
• Once for the first letter
• Twice for the second letter
• And so on
38
39
Download from Www.Somanuals.com. All Manuals Search And Download.
En t e rin g Te xt
Phonebook
You can store phone numbers and their correspon-
ding names in the memory of your SIM card. In
addition, you can store up to 500 numbers and
names in the phone memory. The SIM card and
phone memories, although physically separate, are
used as if they were a single entity, called the
phonebook.
Using the Number Mode
The Number mode enables you to enter numbers in a
text message (a telephone number, for example).
Press the keys corresponding to the required digits
before manually switching back to the appropriate
text entry mode.
Storing a Phone Number with a Name
Using the Symbolic Mode
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in the phonebook.
The Symbolic mode enables you to enter various
symbols.
1. Key in the number to be stored.
Notes:
• If you make a mistake while entering a number,
1 2 3 4 5 6 7 8 9
correct it using the
soft key. For further
.( ) ,
:
;
%!
details, refer to page 22.
• To insert a dialling pause for special phone
services, such as banking by phone, hold down
. ‘P’ is displayed to indicate the pause.
S a v e
S YM
To scroll through the symbols available, press
the or key. Press the number key
2. When you are sure that the number is correct,
press the Save soft key.
corresponding to the required symbol. The phone
then automatically switches back to the text entry
mode used immediately prior to selecting the
Symbolicmode.
3. Enter the corresponding name (the maximum
length depends on your SIM card). For information
on how to enter a name, see page 35.
4. When you are satisfied, press the Save soft key.
The phone now displays the first free location in
the SIM card for you to save the number and
name. If the card memory is full, the first free
location in the phone memory is displayed.
5. Press the right soft key to toggle between the phone
(To Phone) and card (To Card) memories.
40
41
Download from Www.Somanuals.com. All Manuals Search And Download.
P h o n e b o o k
P h o n e b o o k
6. If you do not want to save the number and name
Voice Record
in the suggested location, press
to clear the
Note: This option only appears if no name has as yet
location number and enter your preferred location
by pressing the number keys.
been recorded.
This option allows you to add a voice tag to the
number.
7. Press OK to store the name and number.
You can access the phonebook options by
pressing the Options soft key, or scroll through
Follow the instructions given by your phone to record
the required name.
the memory with
or
.
8. To exit, press the
key.
Play Voice
Note: This option only appears when you have
Phonebook Options
already recorded a name.
This option plays back the names that you have
recorded.
When storing or viewing a number in the phonebook,
Options appears above the left soft key to allow you
to access the phonebook options, described in the
following paragraphs.
Voice Delete
Note:This option only appears when you have
already recorded a name.
Accessing the Options
This option allows you to delete a specific voice tag.
You are asked to confirm the deletion by pressing the
OK soft key.
To access the various phonebook options, proceed as
follows.
1. Press the Options soft key.
Paste
The first available option is highlighted.
Allows you to paste the phonebook number into the
normal dialling mode. Use this option to dial a
number similar to one in the phonebook (a different
extension in the same office for example).
2. To...
Then press the...
Select the
Select soft key.
highlighted option
Use the soft key to change the number as
required (refer to page 22 for further details). When
Highlight a
or
key one or
you are ready to dial, press
.
different option
more times until the
required option is
42
highlighted.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
P h o n e b o o k
P h o n e b o o k
Edit
Colour
Allows you to edit a number and name stored in the
phonebook.
This option allows you to assign a specific service
light colour to a number and thus distinguish the
caller by the service light colour.
Four colours are available (normal, orange, violet and
blue) and they can be assigned to up to five numbers.
If no specific colour is assigned, the service light
flashes in normal color when you receive a call.
Erase
Allows you to erase a number and name stored in
the phonebook.
You are asked to confirm that you wish to erase the
name and number from the phonebook by pressing
the Yes soft key.
Speed-Dialling by SIM Memory Location
Once you have stored phone numbers in the SIM
card, you can dial them easily whenever required.
Copy
Allows you to copy a phonebook number to another
location. Use this option to store a number similar to
one already in memory; once copied, edit the number
and store it in another location on the SIM card or in
the phone memory.
To speed-dial a number, proceed as follows.
To speed-dial a
Then...
number in locations...
2 to 9
Press and hold down the
appropriate key.
Memory Status
10 and above
Press the appropriate keys,
followed by the # key.
When the display shows
the name, phone number
and location, press the
Dial soft key.
This option allows you to check how many names and
phone numbers are stored and how many locations
are still free in the card memory and phone memory.
Alert
This option allows you to assign a specific ringing
tone to a number and thus distinguish the caller by
the ringing tone. Specific ringing tones can be
assigned to up to five numbers.
Note: Memory location 1 is reserved for your Voice
Mail server number.
44
45
Download from Www.Somanuals.com. All Manuals Search And Download.
P h o n e b o o k
P h o n e b o o k
Searching for and Dialling a Number in
the Phonebook
Dialling a Number using the Service
Directory or Information Numbers
1. When the idle screen is displayed, press the
Note: The Service Dir. and Information Numbers
options may not be available, depending on
your SIM card.
PhoneBook soft key.
2. If your SIM card provides Service Dialling Number
(SDN) and Information Number services, press the
OK soft key when Find Entry is highlighted.
If not, go to step 3.
When the idle screen is displayed, press the
PhoneBook soft key, then you can select one of the
services.
3. Enter the start of the name that you wish to find
Service Dir.: enables you to view the Service
Directory and make calls from it.
and press the Find soft key.
Note: You can also scroll through the phonebook
from the beginning, by pressing the Find
soft key directly.
Information Numbers: enables you to see the
Information Numbers in a tree structure and make
a call.
The phonebook entries are listed, starting with
the first entry matching your input. This entry is
also highlighted.
5. To...
View the
Then press the...
View soft key.
highlighted entry
Select a
or
key one or more
different entry
times until the required entry
is highlighted.
Look for a name Key labelled with the required
starting with a
different letter
letter.
6. Once you have found the required entry, press
to dial the number.
46
47
Download from Www.Somanuals.com. All Manuals Search And Download.
S e le c t in g Fu n c t io n s a n d Op t io n s
Selecting Functions
and Options
To view the various functions/options available and
select the one required, proceed as follows.
Your phone offers a set of functions that allow
you to customise your phone. These functions are
arranged in menus and sub-menus, accessed via the
two soft keys. Each menu and sub-menu allows you
to view and alter the settings of a particular function.
1. Press the appropriate soft key.
2. To...
Select the:
Then press the...
The roles of the soft keys vary according to the
current context; the label on the bottom line of the
display just above each key indicates its current role.
Left soft key.
• Function displayed
or
• Option highlighted
View the next function
or highlight the next
option in a list
key.
key.
Example:
Move back to the
previous function
or option in a list
<SERVICE PROVIDER>
S a t 1 4 M a r 1 2 : 5 7
Move back up one
level in the structure
Right soft key.
key.
Exit the structure
without changing
the settings
In some functions, you may be asked for a password
or PIN. Enter the required code and press
.
Note: When you access a list of options, your phone
highlights the current option. If, however, there
are only two options, such as On/Off or
Enable/Disable, your phone highlights the
option that is not currently active, so that you
can select it directly.
Press the left soft key
to access the menu
feature.
Press the right soft
key to access the
Phonebook feature.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
49
Us in g t h e Me n u s
Using the Menus
The phone offers a range of functions that allow you
to tailor the phone to your needs. These functions
are arranged in menus and sub-menus.
Accessing Menu Functions by Using
Shortcuts
The menu items (menu, sub-menus and options) are
numbered and can be accessed quickly by using their
shortcut number. The shortcut number is shown in
the bottom line on the display.
The menus and sub-menus can be accessed by
scrolling or by using the shortcuts.
Accessing Menu Functions by Scrolling
1. In idle mode, press the Menu soft key to access
the menu facility.
1. In idle mode, press the Menu soft key to access
the menu facility. Scroll with the
or
2. Key in the first digit of the shortcut number.
Repeat this for each digit of the shortcut number.
keys to reach the required main menu, such as
Tones. Press the Select soft key to enter the
menu.
Example: setting the Any-key Answer function
2. If the menu contains any sub-menus, Ring Tone
for example, you can access them by scrolling
Press the Menu soft key, and key in
,
,
,
.
with the
or
keys and pressing the
Select soft key.
Menu to enter the menu, 5 for Settings, 1 for
Phone Settings, 4 for Any-key Answer and 2 to
set the Any-key Answer option to ON.
If the menu you have selected contains further
options, repeat the same procedure.
3. To...
Scroll through the menus
Confirm the chosen setting Select soft key.
Then press the...
Note: The numbers assigned to each menu option
are indicated in the list on next page. They
may not match the menu number on the
phone. It depends on the services
or keys.
supported by the SIM card.
Return to the previous
menu level
soft key.
Exit the menu, without
changing the settings
key.
50
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Us in g t h e Me n u s
Us in g t h e Me n u s
Menu Structure
Main menu
level 1
level 2
Menus let you check or change your phone settings. The
following outline shows the menu structure.
3. Voice Functions
1. Voice Dial
1. Record
2. Act
3. Delete One
4. Play All
5. Delete All
1. Record
Note: You can only see menu 0, if your SIM card supports
the SIM Application Toolkit. This is a network
feature. Please contact your service provider for
more information.
2. Voice Command
3. Voice Memo
2. Act
3. Play All
4. Delete All
1. Record
2. Replay
Main menu
level 1
level 2
3. Delete One
4. Delete All
1. Off
2. Voice Dial
3. Voice Command
1. Call Records
1. Missed Calls
2. Received Calls
3. Dialled Calls
4. Call Time
4. Voice Active
5. AnswerPhone
1. Last Call Time
2. Total Sent
3. Total Received
4. Reset Timers
1. Last Call Cost
2. Total Cost
4. Tones
1. Ring Tone
2. Melody Composer
3. Ring Volume
4. Alert Type
5. Keypad Tone
6. Message Tone
7. Error Tone
1
5. Call Cost
3. Max Cost
4. Reset Counters
5. Set Max Cost
6. Price/Unit
8. Minute Minder
9. Connect Tone
2. Messages
1. Voice Mail
1. Connect to Voice Mail
2. Voice Server Number
5. Settings
1. Phone Settings
1. Greeting Message
2. Read Messages
3. Write Messages
4. Preset Message List
5. Setup
1
2. Own Number
3. Language
4. Any-key Answer
5. Backlight
6. Service Light
7. Auto Redial
8. Auto Answer
9. Caller ID
1. Service Centre
2. Default Type
3. Default Validity
4. Reply Path
5. Delivery Report
1. Read
6. Broadcast
0. KeyLock Settings
*. Reset Settings
#. Active Line
2. Receive
3. Channel List
4. Language
1
7. Picture Messages
1
Shown only if supported by your SIM card.
52
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Us in g t h e Me n u s
Call Records
Main menu
level 1
level 2
2
5. Settings
2. Network Services
1. Call Diverting
2. Call Barring
2
2
Via this menu, you can view the phone calls:
3. Call Waiting
4. Network Selection
5. Line Identification
6. Closed User Group
1. PIN Check
• Missed
• Received
• Dialled
2
3. Security Settings
2. Change PIN
3. Phone Lock
The number and name (if available) are displayed
together with the date and time at which the call
was made. You can also view call times and costs.
4. Change Password
5. SIM Lock
1
6. FDN Mode
1
7. Change PIN2
4. LCD/LED Settings
5. Browser Settings
1. Screen Mode
2. Select Image
3. LCD Contrast
4. Service Colour
1. Proxy Settings
2. Current Proxy
Missed Calls
Menu 1-1
2
This option lets you view the last 10 unanswered
calls. You can also:
• Edit the number if available and dial it or save it
in the phonebook
6. Organiser
1, Scheduler
2. Alarm
1. Daily Alarm
2. Once Alarm
3. Weekly Alarm
4. Alarm Tone
3. Calculator
4. World Time
5. Clock
• Delete the call from the list
• Listen the left messges by Answerphone using the
Listen option
1. Set Time
2. Set Date
3. Format
7. Games
1. Squares
2. Fortress
3. Ice Cave
Received Calls
Menu 1-2
2
8. WWW Services
1. Home
This option lets you view the last 10 phone calls
received. You can also:
2. Bookmark
3. Goto
• Edit the number if available and dial it or save it
in the phonebook
• Delete the call from the list
1
Shown only if supported by your SIM card.
2
May not be shown or supported by your network service provider.
54
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Ca ll Re c o rd s
Ca ll Re c o rd s
Dialled Calls
Menu 1-3
Call Cost
Menu 1-5
Note: The options of this menu may vary, depending
This option lets you view the last 10 numbers dialled.
You can also:
on your SIM card.
• Edit the number and save it in the phonebook
• Redial the number
• Delete the number from the list
This network feature lets you view the cost of calls.
The following options are available.
Last Call Cost: cost of the last call made.
Total Cost: total cost of all calls made since the cost
counter was last reset. If the total cost exceeds the
maximum cost set via the Set Max Cost option, you
will no longer be able to make any calls, except calls
to the emergency services, until you reset the
counter.
Call Time
Menu 1-4
This option lets you view the timers for calls made
and received. The following timers are available.
Last Call Time: length of the last call.
Max Cost: maximum cost set via the Set Max
Cost option (see below).
Total Sent: total length of all calls made since the
timer was last reset.
Reset Counters: option used to reset the cost
counter; you must first enter your PIN2 (see
page 123) and then press the OK soft key.
Total Received: total length of all calls received
since the timer was last reset.
Reset Timers: option used to reset the call timers;
you must first enter the phone password (see
page 122) and then press the OK soft key.
Set Max Cost: option used to enter the maximum
cost that you authorise for your calls. You must first
enter your PIN2 (see page 123) and then press the
OK soft key.
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, rounding-off for billing
purposes and so forth.
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls. You must first enter your PIN2
(see page 123) and then press the OK soft key.
Note: AOC (Advice Of Charge) information may be
displayed in idle mode, depending on your SIM
card or service provider.
56
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Me s s a g e s
Messages
Your phone receives voice mail notification messages,
and the Short Message Service(SMS) messages. Voice
mail and the SMS are network services. Please contact
your service provider for more information.
Note: In idle mode, you can access your voice mail
server directly by holding down the
key.
Voice Server Number
You can change the voice mail server number.
When the
icon appears, you have received new
To...
Then press the...
text messages. If the Alert type menu option (4-4) is
set to Light only, the service light flashes yellow.
Enter the server
number
Corresponding number
keys.
When the
mail. If the message memory is full, an error message
is displayed, the icon flashes and you cannot
icon appears, you have received voice
Recall a number in
the phonebook
PhoneBook soft key.
receive any new messages. Use the Delete option in
the Read Messages menu (2-2) to delete obsolete
messages.
Correct a digit
soft key.
Move the cursor to
the left/right without
clearing the digit
or
key.
Picture and ringing tone messages can also be received.
To...
Then use the...
Send or receive
Picture Messages menu
Note: See page 41 for instructions on how to use the
phonebook.
picture messages
option (2-7); see page 64.
Load ringing
tone messages
Ring Tone menu option (4-1);
see page 73.
Read Messages
Menu 2-2
Voice Mail
Menu 2-1
When the Read Messages menu is selected, the
header of the first message is displayed:
• Message number
This menu provides you with a quick way of accessing
your voice mailbox (if provided by your network).
• Message status (new, old, not sent, sent)
To view this message, press the View soft key. The
screen shows the:
Connect to Voice Mail
• Sender’s phone number (if sent with the message)
• Date and time at which the message was
received
Before using this feature, you must enter the voice
server number obtained from your service provider (see
the following page). You can then select this option
and simply press the OK soft key to listen to your
messages.
• Message text
58
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Me s s a g e s
Me s s a g e s
Write Messages
Menu 2-3
To scroll through the messages, press the
or
Via this menu, you can write and edit text messages
of up to 160 characters.
keys. You can choose the following options, by
pressing the Options soft key.
1. Key in a message. For details on how to enter
text, refer to page 35.
Text Reply: allows you to reply by sending a text
message. You can also:
2. After you complete the message, you can select
the following options.
• Send the message
• Save and send the message
• Save but not send the message
Send Only: allows you to send the message
immediately. You can enter the required
destination.
Call back: allows you to call the sender back.
Edit: allows you to edit a message.
Save and Send: allows you to save a copy of the
message and then send the message to the
required destination. You can read the message
using the Read Messages option. When you
read the message, ‘Sent’ is displayed to indicate
the message state.
Delete: allows you to delete obsolete messages.
Cut Number: allows you to extract a number from
the message text, so that you can call the number or
save it in the phonebook.
Send: allows you to send a message that you have
not already sent.
Save Only: allows you to save the message so
that it can be sent later. When you read the
message, ‘Not sent’ is displayed.
Send again: allows you to resend a message that
you have already sent.
3. After selecting the required option, press the
Select soft key.
Note: The options available vary, depending on the
message status (new, old, not sent, sent).
The display prompts you to enter the destination
number.
4. Enter the phone number and press the OK soft
key.
60
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Me s s a g e s
Me s s a g e s
Preset Message List
Menu 2-4
Default Type: allows you to set the default message
type (Text, Voice, Fax, X.400, Email, and ERMES). The
network can convert the messages into the selected
format.
Using this menu, you can preset up to five messages
that you use most frequently. This menu shows the
preset message list. Scroll through the list using
Default Validity: allows you to set the length of
time for which your text messages will be stored at
the SMS centre while attempts are made to deliver
them to you.
the
or
keys. When the required message
number appears, press the Options soft key.
The following options are available.
Possible values are one hour, 6 hours, 24 hours, one
week and the maximum authorised by your service
provider.
Edit: allows you to write a new message or edit the
selected preset message.
Note: For further information on how to enter text in
Reply Path: allows the recipient of your SMS
message to send you a reply via your message
centre, if the service is provided by the network.
your message, refer to page 35.
Send Message: allows you to recall the selected
preset message. Once you have completed the
message, you can send, save and send, or simply save
it.
Delivery Report: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether or not
your message has been delivered.
Delete: allows you to delete the selected preset
message.
Broadcast
Menu 2-6
Setup
Menu 2-5
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately they are
received, provided that:
Via this menu, you can set up default SMS
information.
Service Centre: allows you to store or change the
number of your SMS centre required when sending
text messages. You must obtain this number from
your service provider.
•
•
•
The phone is in the idle mode
The Receive option is set to Enable
The message channel is currently active in the
channel list
If the message is long, press the
one or more times.
and
keys
62
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Me s s a g e s
Me s s a g e s
The last five messages are also stored for later
retrieval. Please contact your service provider for
more information.
The following options are available.
Write Message: allows you to write the text of the
picture message.
The following options are available.
Erase: deletes the picture message; Empty is
displayed instead of the title.
Read: lets you view the first message. Scroll through
the message using
or
. At the end of the
message, press the Next soft key to move to the
next message.
Send Message: allows you to enter the destination
phone number; you must then press the OK soft key
to send the picture message.
Receive: allows you to enable or disable the
reception of broadcast messages.
Cut Number: allows you to extract a number from
the picture message, so that you can call the number
or save it in the phonebook.
Channel List: lists all available channels. The
channels currently selected are indicated by an
asterisk ( ) beside the name. When you select one of
them, you can edit, enable, disable or delete the
channel.
The Enter Channel option allows you to add a new
channel to the channel list. Enter the appropriate
channel ID obtained from your service provider, and a
title for the channel.
*
Receiving a Picture Message
To view a message immediately you receive it, press
the View soft key. To toggle between the text and
image, press the right soft key.
The following options are available.
Save: allows you to save the picture message to
your picture message list.
Language: allows you to select your preferred
language to be used when displaying cell broadcast
messages.
Discard: allows you to discard the picture message
without saving it.
Picture Messages
Menu 2-7
Cut Number: allows you to extract a number from
the picture message, so that you can call the number
or save it in the phonebook.
The phone allows you to send and receive text
messages that contain pictures. These messages are
calls ‘Picture Messages’, several of which are preset
in the phone and can be replaced with new one
received from other sources.
Note: This function is available between phones
supporting Nokia’s* Smart Messaging
services.
* Nokia is a registered trademark of Nokia Corporation.
64
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Vo ic e Fu n c t io n s
Voice Functions
Voice Dial Record
You can use the Voice feature to customize various
settings, such as the:
• Voice Dial
Allows you to record name tags and allocate them to
numbers for voice dialling.
• Voice Command
• Voice Memo
• AnswerPhone
Say the name you want to use for voice dialling after
you hear a voice prompt. For best results, use names
with at least two syllables, or use both a first and
last name. The phone stores the name as a “first”
sample, and then prompts you to say the name
again.
Voice Dial
Menu 3-1
Respond to the prompt by repeating the name. The
phone stores the name as a second sample and then
requests the phone number.
The voice dialling feature allows you to make phone
calls by saying a voice tag that has been added to a
desired name and phone number. Any spoken word, for
example a name, can be a voice tag.
To store the number, press the OK soft key. Follow
the instructions described on page 41 to complete
storing number into your internal phonebook.
Before using voice dialling, note that:
• Voice tags are not dependent on a language.They
are dependent on the speaker’s voice.
• The voice tags are sensitive to any background
noise. Where possible, record voice tags or make
calls in a quiet environment.
• When recording a voice tag or making a call, hold
the phone in the normal position close to your ear.
• The maximum length for a voice tag recording is
about 1.5 seconds, but very short names are not
recorded
Voice Dial Act
This option activates voice dialling.
You hear a voice prompt and Say Name is
displayed. Say the voice tag clearly. If no match for
the voice tag is found or recognized, the phone may
ask you to try again. The phone automatically dials
the number of the recognized voice tag.
• You can store up to twenty voice tags in the
phone’s memory.
Note: This option is only available once you have
recorded voice tags.
66
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Vo ic e Fu n c t io n s
Vo ic e Fu n c t io n s
Voice Command
Menu 3-2
Voice Dial Delete One
This menu allows you to get quick access to the
frequently used menus by saying your own voice
command.
Allows you to delete an individual voice tag. The
corresponding phone number remains in the
phonebook but the voice tag is deleted.
If the name displayed is... Then press the...
You can select the following functions:
To be deleted
OK soft key.
Voice Command Record: The most frequently used
menu functions are programmable with your own
voice commands. The menus are preset to OFF at the
factory, indicating that they are not recorded. When
voice commands are recorded successfully, the
menus are changed to ON in the display.
Not to be deleted
or
key.
The next name is
displayed.
To exit the Voice Dial Delete One option, press the
soft key.
Voice Command Act: Use this menu to access the
menu of the recorded voice commands.
Voice Dial Play All
Voice Command Play All: Plays all voice
commands you have recorded.
Allows you to play back all recorded voice tags.
Voice Command Delete All : Deletes all
commands you have recorded.
Voice Dial Delete All
Allows you to delete all voice tags. The
corresponding phone numbers remain in the
phonebook but the voice tags are all deleted. Press
the OK soft key when the message ‘Delete All
confirm?’ is displayed.
Voice Memo
Menu 3-3
You can use the Voice Memo feature to :
• Record up to 3 voice memos
• Play the recorded voice memos
• Delete one or all voice memos
Otherwise, press the Cancel soft key to exit the
function without deleting the voice tags.
68
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Vo ic e Fu n c t io n s
Vo ic e Fu n c t io n s
Voice Memo Record: Allows you to record a
memo. The screen displays the:
• Memo location
• Date and time when the memo was recorded
• Recording time counter
Voice Active
Menu 3-4
This setting automatically enables the voice dial or
voice command mode when you press the
in idle mode.
key
The maximum recording time is about 35 seconds.
If you want to record for longer, press the Continue
soft key. Split appears instead of Continue. You can
continue recording and the rest of the memo is
stored in the next memo location.
The following options are available:
Off: The voice dial or voice command mode must be
activated manually.
To stop recording, press the Stop soft key.
Voice Dial: The voice dial mode is activated when
you press the
key in idle mode.
Note: If all memo locations are full, you must delete
an old memo before recording a new one.
Voice Command: The voice command mode is
activated when you press the
mode.
key in idle
Voice Memo Replay: Allows you to play back all
memos recorded, starting with the most recent
memo. The screen displays the:
• Memo location
• Date and time when the memo was recorded.
To skip to the next memo, press the Skip soft key, to
stop the playback, press the Stop soft key.
Voice Memo Delete One: Allows you to delete a
specific memo. All memos recorded are played back,
starting with the most recent one.
Voice Memo Delete All: Allows you to delete all
memos. Press the OK soft key to confirm.
70
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Vo ic e Fu n c t io n s
AnswerPhone
Menu 3-5
You can set your phone to answer calls with your
own recorded message.
You can use the message to inform callers of your
current situation and to guide them to leave
messages in your phone.
Note: You can listen the left message by using the
Listen option of the Missed Call function.
While the message is being played, if you wish, you
can take the call by pressing the Accept soft key.
The following options are available.
Disable: The AnswerPhone is not used.
Enable: TheAnswerPhone is ready to use.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Tones
You can use the Tones menu to customise various
sound settings, such as the:
• Ringing tone or melody, volume and type
• Sounds made when you press a key, make an error
or receive a message
Note: The silent mode allows you to turn the various
tones off when discretion is required. Press and
hold down
deactivating the silent mode.
to toggle between activating and
Ring Tone
Menu 4-1
This option allows you to select the required ringing
tone. 25 different tones are available; 8 for default ring
tone, 12 for downloading tone from internet, 2 by the
Melody Composer, 3 by SMS.
When you receive a ringing tone message, proceed as
follows.
1. To listen to the tone, press the Play soft key.
2. Press the Save soft key.
3. Select one of the ringing tone locations and
press the OK soft key.
4. To use this tone as the ringing tone, press the Yes
soft key. Otherwise No soft key.
If your SIM card supports the ALS feature, this option
also allows you to select a different ringing tone for
each line, and thus distinguish incoming calls.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
To n e s
To n e s
To...
Then press the...
Melody Composer
Menu 4-2
Enter a rest
key (press the key
until the rest is of the
required length).
This option allows you to compose your own melody
to be used as the ringing tone.
• Three octaves are available.
Delete notes
key.
• A maximum of 100 notes can be entered.
• You can adjust the length of the notes and add
rests, as required.
Move a note a
semitone up or down
or
key (for
example, the note A
changes to A#, B, C, C#,
and so on in the scale
each time you press
Composing a Melody
the
key).
1. When you access the menu, the names of any
melodies created are displayed. Otherwise,
(Empty) appears. Select the melody that you wish
to create or edit.
Add # to a note or
not
key.
Change the length
of a note
key (the length
will be changed each
2. Press the Select soft key and compose your
time you press the key)
Listen soft key.
key.
.
melody using the following keys.
Listen to your melody
Cancel your changes
To...
Then press the...
Enter C, the first note
in the musical scale
key.
3. When you are satisfied with your melody, press
the Yes soft key.
Enter D
Enter E
Enter F
Enter G
Enter A
Enter B
key.
key.
key.
key.
key.
4. Enter a title for the melody.
Note: For further details on how to enter
characters, refer to page 35.
You are asked if the melody is to become the
ringing tone.
key.
key.
5. To use the melody as the ringing tone, press the
Yes soft key.
Move a note up or
down one octave
The melody is saved and is played each time your
phone rings.
74
75
Download from Www.Somanuals.com. All Manuals Search And Download.
To n e s
To n e s
Keypad Tone
Menu 4-5
Deleting a Melody
1. Select the melody that you wish to delete.
This option allows you to select the tone that the
keypad generates when you press a key. The
following options are available.
2. Press and hold
for a few seconds.
All notes are erased.
3. Press the Listen soft key. You are asked to
confirm that you wish to delete the melody by
pressing the Yes soft key.
OFF: the keys do not make any sound.
Tone: each key, when pressed, makes a different
sound.
Beep: each key, when pressed, makes the same
sound.
Ring Volume
Menu 4-3
This option allows you to adjust the ringing volume
level.
Message Tone
Menu 4-6
Use the
or
keys. The greater the number
of bars, the greater the volume level.
This option allows you to select how the phone
informs you that a new message has been received.
The following options are available.
Alert Type
Menu 4-4
SMS Tone1 ~ SMS Tone5: the phone uses an SMS
tone. You are provided with ten SMS tones.
This option allows you to indicate how you are to be
informed of any incoming calls. The following options
are available.
Single Beep: the phone beeps once.
Light Only: the service light on the top of the phone
flashes yellow.
Light only: only the backlight is switched on; the
phone neither rings nor vibrates.
Melody: the phone rings using the ringing tone
selected via menu option 4-1.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone both rings and vibrates.
76
77
Download from Www.Somanuals.com. All Manuals Search And Download.
To n e s
Settings
Error Tone
Menu 4-7
Many different features of your phone can be
customised to suit your preferences. All of these
features are accessed via the Settings menu.
This option allows you to select how the phone
informs you that you have made a mistake. The
following options are available.
OFF: the phone does not beep.
Phone Settings
Menu 5-1
ON: the phone beeps to indicate an invalid entry.
Greeting Message
Minute Minder
Menu 4-8
This option allows you to set a greeting message to
be displayed briefly when the phone is switched on.
The current message is displayed.
This option allows you to specify whether the phone
must beep every minute during an outgoing call to
keep you informed of the length of your call. The
following options are available.
To...
Then press the...
Clear the existing message
key and hold it
down until the message
is cleared.
OFF: the phone does not beep.
ON: the phone beeps every minute.
Enter a new message
Appropriate
alphanumeric keys.
Connect Tone
Menu 4-9
For more information on how to enter characters,
refer to page 35.
This option allows you to specify whether the phone
should beep when the phone connects to the
network. The following options are available.
To go back to the previous menu level without saving
your input, press
.
OFF: the phone does not beep.
ON: the phone beeps when your call is accepted.
78
79
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t in g s
S e t t in g s
Own Number
Any-key Answer
Note: The contents of this menu may vary,
Depending on the setting of the Any-key Answer
depending on the SIM card.
option, you can answer an incoming call by pressing
any key, except
To reject the call, press
The following options are available.
and the Reject soft key.
or the Reject soft key.
You can enter your own name and number using this
menu. If you have subscribed to the Alternate Line
Service, you can select a line with
or
.
ON: you can press any key, except
and Reject.
The following options are available:
OFF: you can only press
or the Accept soft key.
Add: allows you to add name and number.
Edit: allows you to edit name and number.
Backlight
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off. The
following options are available.
Erase: allows you to erase name and number.
Language
You can select the text language. When the
Short: the backlight comes on when you press a key
or receive a call and switches off 10seconds after
the last key is pressed.
language option is set to Automatic, the language
is automatically selected according to the language
of the SIM card used.
Long: the backlight comes on when you press a key
or receive a call and switches off 20seconds after
the last key is pressed.
You can also set the default text input mode. For
details on the text input modes available, refer to
page 35.
OFF: the backlight is not used.
80
81
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t in g s
S e t t in g s
Service Light
Caller ID
This option allows you to select whether or not the
service light on the top of the phone is used. The
following options are available.
You can prevent your phone number from being
displayed on the phone of the person being called.
Note: Some networks do not allow the user to
change this setting.
ON: the service light flashes when the phone is
ready for use.
The following options are available.
OFF: the service light is not used.
Default: the default setting provided by the network
is used.
Hide Number: your number is not displayed on the
other person’s phone.
Auto Redial
With the Auto Redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
Send Number: your number is sent each time you
make a call.
Note: The interval between two call attempts varies.
KeyLock Settings
The following options are available.
ON: the number is redialled automatically.
OFF: the number is not redialled.
With the key lock function, you can prevent accidental
key pressing.
15 seconds/ 30 seconds/ 1 minute/ 2 minutes:
You can see the lock icon( )is displayed or your key
input doesn’t work in idle mode. To activate the key
pad, press the left soft key and press the
The keypad is automatically locked if no key is
pressed within the setting time.
key.
Auto Answer
With the Auto Answer function, the phone auto-
matically answers calls after 3, 5 or 10 seconds. You
can also turn this feature off.
OFF: the keypad will not lock automatically.
Note: You can make the keypad lock manually by
pressing and holding the key in
idle mode regardless of this key lock setting.
Note: This feature is only available when the phone
is connected to a car kit (optional).
82
83
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t in g s
S e t t in g s
Call Diverting
Reset Settings
Note: Some call divert options may not be shown if
they are not supported by your network
operator.
You can easily reset your phone to its default
configuration. To do so, proceed, as follows.
1. Select the Reset Settings menu option.
This network service enables incoming calls to be
rerouted to the number that you specify.
2. Enter the 4-digit phone password.
Example: You may wish to divert your business calls
to a colleague while you are on holiday.
Note: The password is preset to 0000. To change this
password, refer to page 95.
Call diverting can be set up in the following ways.
Active Line
Divert Always: all calls are diverted.
Some SIM cards may be used with two subscriber
numbers (network service). This function is available
only if your SIM card supports it.
Busy: calls are diverted if you are already on the
phone.
This menu allows you to select the line to be used
when making calls. However, calls can be answered
on both lines, regardless of the line selected. When
you select a line, the line number appears as an
indicator after the operator/service provider’s names.
No Reply: calls are diverted if you do not answer the
phone.
Unreachable: calls are diverted if you are not in an
area covered by your service provider.
When you select the Manual option, you can choose
a line whenever you access the call barring, diverting
and waiting features; the active line is not displayed.
Unavailable: calls are diverted if you are busy, do not
answer or cannot be reached.
Cancel All: all call diverting options are cancelled.
Network Services
Menu 5-2
Note: These options may be different, depending on
the SIM card.
These menu functions are network services.
Please contact your service provider to check their
availability and subscribe to them, if you so wish.
You can specify individual diverting options for each of
the following call types:
• Voice calls only
• Fax calls only (not available when line 2 is in use)
• Data calls only (not available when line 2 is in use)
84
85
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t in g s
S e t t in g s
Example: You can:
3. Press the Remove soft key.
• Systematically divert fax calls to your
office fax machine
• Divert voice calls to your colleague if
you are already using the phone
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all call diverting settings by
selecting the Cancel All option.
To set your call diverting options, proceed as follows.
1. Select the type of call diverting required by
Note: When all calls are diverted, one of the
indicators below is displayed on the last line of
the display,if supported by your SIM card.
pressing
or
until the appropriate
option is highlighted, and then press the Select
soft key.
Divert Line 1: all calls from line 1 are diverted.
Divert Line 2: all calls from line 2 are diverted.
Divert All: all calls from lines 1 and 2 are
diverted.
2. Select the type of calls to be diverted by pressing
or
until the appropriate option is
highlighted and then press the Select soft key.
Call Barring
3. Press the Activate soft key to confirm your settings.
The call barring network service allows you to
restrict your calls.
4. Enter the number to which the calls are to be
diverted.
To enter the international code, press 0 until the
+ sign is displayed. You can also select a number
in the phonebook or the voice server number, by
pressing the Options soft key, followed by
PhoneBook or Voice Server Number.
Call barring can be set up in the following ways.
All outgoing: calls cannot be made.
International: international calls cannot be made.
International except to home: when abroad, calls
can be made only to numbers within the current
country and to your home country, that is the country
where your home network provider is located.
5. When you are satisfied, press
key.
or the OK soft
The phone sends your setting to the network and
the network’s acknowledgement is displayed.
All Incoming: calls cannot be received.
To deactivate specific call diverting settings, proceed
as follows.
Incoming while abroad: calls cannot be received
when you are using your phone outside your home
service area.
1. Select the call diverting option to be deactivated.
2. Select the type of call to which this option applies.
Cancel All: all call barring settings are deactivated;
calls can be made and received normally.
86
87
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t in g s
S e t t in g s
Change Barring Password: you can set and
To set your call barring options, proceed as follows.
1. Select the type of call barring required by pressing
change the call barring password obtained from your
service provider using this option. You must enter the
current password before you can specify a new one.
or
until the appropriate option is
highlighted and then press the Select soft key.
Once you have entered a new password, you are
asked to confirm it by entering it again.
2. Select the type of calls to be barred by pressing
the
or
key until the appropriate option
is highlighted and then press the Select soft key.
Call Waiting
3. Press the Activate soft key to confirm your
This network service enables you to be informed when
someone is trying to reach you during another call.
settings.
4. Enter your call barring password supplied by your
service provider.
To set your call waiting options, proceed as follows.
1. Select the type of calls to which the call waiting
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
option is to be applied by pressing
or
until the appropriate option is highlighted and
then press Select.
To deactivate specific call barring settings, proceed
as follows.
2. Press the Activate soft key to confirm your
settings.
1. Select the call barring option to be deactivated.
2. Select the type of call to which this option applies.
3. Press the Remove soft key.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
To deactivate specific call waiting settings, proceed
as follows.
4. Enter your call barring password supplied by your
service provider.
1. Select the type of call to which the option applies.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
2. Press the Deactivate soft key.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all call barring settings by
selecting the Cancel All option.
You can also deactivate all call waiting settings by
selecting the Cancel All option.
88
89
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t in g s
S e t t in g s
Network Selection
Line Identification
The Network Selection feature enables you to:
• Indicate whether the network used when roaming
(outside your home area) is selected automatically
or manually
This option allows you to view the following line
identification settings.
CLIP (Calling Line Identification Presentation) /
COLP (Connected Line Identification Presentation)
If these network functions are active, the caller’s
number is displayed during a call. If the phone
number matches one stored in the phonebook, the
caller’s name is also displayed.
CLIR (Calling Line Identification Restriction) /
COLR (Connected Line Identification Restriction)
If these network functions are active, your phone
number is not displayed on the called person’s phone.
Note: You can select a network other than your
home network only if it has a valid roaming
agreement with your home network.
To indicate whether the network is to be selected
automatically or manually when roaming, proceed as
follows.
1. When Network Select is displayed, press the
Select soft key.
2. Press
or
until the appropriate option is
highlighted and press the OK soft key.
If you select Automatic, you are connected to the
first available network when roaming.
If you select Manual, the phone scans for the
available networks. Go to Step 3.
3. Press
or
until the preferred network is
highlighted and press the OK soft key.
You are connected to that network when roaming.
90
91
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t in g s
S e t t in g s
Outside Access: enables you to allow or prohibit
calls to numbers other than those nominated for the
Closed User Group. This feature depends on the
nature of your CUG subscription. Please check with
your service provider.
Closed User Group (CUG)
This network service allows incoming and outgoing
calls to be restricted to a selected user group. You
may be a member of up to 10 user groups.
For details on how to create, activate and use a
closed user group, contact your service provider.
Default Group: you may communicate a default
CUG to your service provider. If you have done so,
you can enable the Default Group option on your
phone. When making a call, you will be given the
option of using your default CUG, instead of
selecting one from the list.
Example: A company lends SIM cards to its
employees and wants to restrict outgoing
calls to members of the same team.
Activating a Closed User Group
If you select the Closed User Group menu, you are
asked if you wish to activate the CUG function. Press
the Yes soft key. You can now access the following
options.
Security Settings
Menu 5-3
The Security feature enables you to restrict the use
of your phone to:
Deactivate: deactivates the CUG function.
• The people of your choice
• The types of calls of your choice
Index List: lets you list, add or delete CUG index
numbers. The list of current CUG indexes appears.
Add a new CUG index (as advised by your service
provider) or delete a selected group.
Various codes and passwords are used to protect the
features of your phone. They are described in the
following sections (also see page 122).
To...
Then press the...
or key.
Scroll through the
existing CUG indexes
Add a new CUG index Options soft key, select
Add and enter the index.
Delete a CUG index
or
key to select
the index to be deleted,
press the Options soft key
and select Delete.
92
93
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t in g s
S e t t in g s
The following options are available.
PIN Check
Enable: you are required to enter the phone
password when you switch the phone on.
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
Disable: you are not asked to enter the phone
password when you switch the phone on.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
Change Password
The Change Password feature allows you to change
your current phone password to a new one. You must
enter the current password before you can specify a
new one.
The following options are available.
Enable: you must enter the PIN each time the phone
is switched on.
Disable: the phone connects directly to the network
when you switch it on.
The password is factory set to 0000. Once you have
entered a new password of up to 4 digits, you are
asked to confirm it by entering it again.
Change PIN
SIM Lock
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature is
enabled. You must enter the current PIN before you
can specify a new one.
When the SIM Lock feature is enabled, your phone
only works with the current SIM.
Once you have entered the lock code, you are asked
to confirm it by entering it again.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock code.
Phone Lock
FDN Mode
When the Phone Lock feature is enabled, the phone
is locked and you must enter the phone password
each time the phone is switched on.
The FDN(Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
The password is factory set to 0000. To change the
phone password, refer to the Change Password
menu option (5-3-4).
Once the correct password has been entered, you
can use the phone until you switch it off.
94
95
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t in g s
S e t t in g s
Clock: The LCD displays an analogue clock. To
The following options are available.
display the normal mode for a while, press any key.
Enable: you can only call phone numbers stored in
the phonebook. You must enter your PIN2.
Select Image
Disable: you can call any number.
This option allows you to select the image to be
displayed when you set the Screen Mode option to
Image Display. You can select one of images.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
Change PIN2
LCD Contrast
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked to
confirm it by entering it again.
This option allows you to adjust the contrast of the
LCD screen. Press
decrease the contrast.
to increase or
to
Service Colour
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
There are six colours available for the service light:
normal (green), yellow, orange, violet, blue and sky
blue.
LCD/ LED Settings
Menu 5-4
You can scroll through these colours, by pressing the
The LCD/LED Settings menu enables you to set the
style of the LCD display.
or
key. Press the Select soft key to select
the required colour.
Screen Mode
You can select the screen image to be displayed in
idle mode.
Normal Mode: the LCD displays <Service
Provider> and the current time and date.
Image Display: The LCD displays the image
selected via the Select Image option. To display the
normal mode for a while, press any key.
96
97
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t in g s
Browser Settings
Menu 5-5
Note: This menu may not be shown, depending on
your network service provider.
You can set up several proxies, using the Proxy
Settings menu (5-5-1), and you can designate one
as the current proxy, using the Current Proxy menu
option (5-5-2). The following parameters must be set
for each proxy; they may vary depending on your
service provider. Contact your service provider for
further details.
Proxy Name: name of the proxy server.
WAP Address: IP address required to connect to the
Internet.
Port Number: number of the port to be used to
connect the gateway.
Home URL: URL of your home Web site.
Access Point
• NAS Phone Number: PPP server phone number.
• Login Name: PPPserver login ID (may be optional).
• Password: PPP server password (may be optional).
• Network Type: V.32 Transparent, V.32 Non-
Transparent, V.110 Transparent or V.110 Non-
Transparent.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Organiser
The Organiser feature enables you to:
• Write your schedule
• Calculate
• Set the current date and time
• Set the alarm so that the phone rings at a specific
time (to remind you of an appointment for
example)
• Find out what time it is in various cities around
the world
Scheduler
Menu 6-1
The Scheduler helps you to keep track of reminders,
calls that you need to make, meetings and birthdays.
The phone alarm rings when the date set for a
birthday, reminder or call is reached.
When you access the Scheduler menu, the
following options are available.
Go to date: allows you to enter a particular date and
schedule an event on that date.
View All: shows the events scheduled.
Delete All: deletes all scheduled events.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Org a n is e r
Org a n is e r
To schedule a new event, proceed as follows.
1. When the calendar is displayed, use the
A date that has a schedule already associated is
displayed in bold. If you select such a date, you will
see the contents.
and
keys to select the month, the
keys to select the week and the
keys to select the day. You can also use the
and
and
Note: If you have scheduled more than one event on
a given day, you can scroll to the required
event by pressing
or
.
Go to date menu option to specify the date.
The following options are available.
Note: To exit the Calendar screen, press
.
The phone returns to the previous menu
level.
Add: allows you to add new contents.
Delete: deletes the scheduled event.
Move: moves the scheduled event to a new date.
2. Press the OK soft key.
Copy: copies the scheduled event to a new date.
3. Select a schedule type. Four types are available.
Reminder: requires a description and the time.
Call: requires a phone number and the time.
Meeting: requires a description and the time.
Birthday: requires a name and the time.
Delete Day: deletes all events scheduled on that
date.
Alarm
Menu 6-2
4. Enter the appropriate information, referring to
page35 for further details on how to enter text if
necessary.
This option allows you to set the alarm to ring at a
specific time when your phone is switched on. You
can set one or more alarms.
5. If you wish to set the alarm to ring on the
scheduled date and time, select Yes. Otherwise,
select No.
The following alarms are available.
Daily Alarm: the alarm rings every day at the same
time.
6. If you selected Yes, set the time for the alarm
Once Alarm: the alarm rings only once and is then
deactivated.
and press OK.
Weekly Alarm: the alarm rings every week on the
same day and at the same time.
The Alarm Tone option allows you to select a
specific tone for the alarm.
100
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Org a n is e r
Org a n is e r
To set the alarm, proceed as follows.
Calculator
Menu 6-3
1. Select an alarm type by pressing the Select soft
key.
You can use the phone as a 9-digit calculator. The
calculator provides the basic arithmetic functions:
addition, subtraction, multiplication, division,
percentages.
The Set Alarm option allows you to set the alarm
time or days of the week.
2. If you choose Weekly Alarm, select the required
day of the week and press
.
To use the calculator, proceed as follows.
The symbol appears to indicate that the day is
selected.
*
1. Enter the first number using the number keys.
To remove it, press
You can set more than one day.
.
2. Press the Operator soft key until you find the
appropriate arithmetic symbol: + (add),
- (subtract), x (multiply), / (divide).
3. Press the OK soft key.
3. Enter the second number.
4. Enter the required time, then press the OK soft
key.
4. Repeat Steps 2 and 3 if necessary.
Alarm Activated is displayed.
5. To calculate the result to two decimal places,
press the Equal soft key or the
key.
The alarm icon ( ) appears in the top line of the
display. The service light flashes in white when the
alarm rings. To stop the alarm when it rings, press
the Exit soft key or press any key.
To erase any mistakes or clear the display, press
the key.
To enter a decimal point, press the
key.
To deactivate the alarm, select Remove Alarm.
102
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Org a n is e r
Org a n is e r
World Time
Menu 6-4
Examples:
You can use your phone to check the current time in
21 major cities around the world. Scroll through the
Expression
Key Sequence
Result
12*3+5=
12x3+5
(or
)
41
cities using the
or
key.
The screen shows the:
• City name
34+57=
45+57=
34+57
45
(or
(or
)
)
91
102
• Current date and time
48-23=
14-23=
48-23
14
(or
(or
)
)
25
-9
• Time difference between the selected city and
your city if you have set the local time (see below
for further details) or GMT (by default)
68*25=
68*40=
68x25
40
(or
(or
)
)
1700
2720
35/14=
98/14=
35/14
98
(or
(or
)
)
2.5
7
To select the time zone in which you are located,
proceed as follows.
10% of 200
10=? % of 100
200x10
10/100
20
10
1. Select the city corresponding to your time zone by
pressing the
times.
or
keys one or more
10% premium of 200 200+10
10% discount of 200 200-10
220
180
The local date and time are displayed.
square of 4
reciprocal of 8
4x
8/
(or
(or
)
)
16
0.12
2. Press the Set soft key.
3. To...
Update the current
Then press the...
Set Local soft key.
date/time with this
new setting
Note: When you have finished with the calculator,
press to return to the previous menu level.
Indicate that the
Set DST soft key.
time zone is currently A check mark is shown
using the daylight
saving time
next to the time
difference.
Indicate that the
Remove DST soft key
time zone is no longer (only available when a
using the daylight
saving time
check mark is shown
next to the time
difference).
104
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Org a n is e r
Games
Clock
Menu 6-5
Using this menu you can also enjoy games on the
phone.
Set Time
This option allows you to change the time displayed,
using the 24-hour system.
Scroll to the desired game and press the Select soft
key.
Note: Before setting the time, you must specify your
time zone, via the World Time menu option (6-4).
The following options are available.
New Game: allows you to start a new game.
High Score: show you the high score list.
Set Date
This option allows you to change the date displayed.
Enter the day, month and year, using the format
specified in the option below.
Key Info.: shows you the key usage.
Continue: allows you to enjoy the paused status. It
enables only when the game was puased before.
Format
This option allows you to select the date format:
While you are playing a game,
•
•
DD/MM/YYYY (day, month, year)
MM/DD/YYYY (month, day, year)
To...
Then press the...
adjust the game volume
volume keys
toggle the backlight
on and off
pause the game
pause and exit the game
106
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Ga m e s
Ga m e s
When you are ranked within fifth rank finishing a game,
you are allowed to enter your name up to 10
characters.
To...
Then press the...
scroll up or down menu
level up/ down
or
Here are the list of available characters or function.
left soft key /right soft
key
1: . @ - _ / : ~ 1
2: A B C 2
3: D E F 3
start a game
4: G H I 4
5: J K L 5
6: M N O 6
Key Commands
7: P Q R S 7
8: T U V 8
9: W X Y Z 9
0: 0
: to clear a previous character
left/right soft key: to move the cursor left or
right
2: move up
8: move down
4: move left
5: rotate
Fortress
Menu 7-2
: to move the cursor to the next position
Object
Squares
Menu 7-1
The goal of the game is to defend the earth against
UFOs. You can check the appearance of UFOs in the
radar. When you depend a city with the given energy
during the given period of time, the stage can be
completed. You can check your energy and remain
time in the left and right parts of the radar.
Object
The goal of the game is to break the blocks making
diamonds. The block can be moved and rotated. There
are three kinds of special blocks; ‘H’ breaks all blocks in
a horizontal line, ‘V’ breaks all blocks in a vertical line,
and ‘S’ breaks all blocks around it.
When you start a new game, you can see the map of
the earth. The ‘V’ mark means you already depended
the city. Press any key to start.
When you break the blocks as many as the remain
numbers, the level can be completed.
When you start a new game, press any key to display
the game setting menu.
108
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Ga m e s
WWW Services
Key Commands
You can use your phone as a Web Browser.
You can obtain up-to-date news, weather, sport, and
other information as well as use e-mail and other
Internet services.
2: move up the cannon
8: move down the cannon
4: move left the cannon
6: move right the cannon
5: shoot
Please contact your service provider to open your
Internet account. To use the Web Browser, you must
indicate your phone number via the Own Number
menu option (5-1-2).
Ice Cave
Menu 7-3
Home
Menu 8-1
Object
The goal of the game is to move eggs into the hole
in ice cave safely within the given period of time.
The penguin can push the egg, push the blinking ice
and jump. The egg can be broken when it is fallen
from higher than 4 steps.
To launch the browser from the idle mode, press
the key on the right side of the display, or
press the Menu soft key, followed by the
and keys.
You can see the ‘T’=time, ‘L’=life, and ‘S’=stage
information on the right side of the display.
Once connected, the homepage is displayed. The
content depends on the service provider.
When you start the game and the initial animation
finished, you can adjust the stage using the left or
To exit the browser at any time, press the
The idle screen is displayed.
key
.
right soft key. Press the
key to start the stage.
Key Commands
2: scroll up the screen
8: scroll down the screen
4: move left
6: move right
5: jump
#: retry
110
111
Download from Www.Somanuals.com. All Manuals Search And Download.
WWW S e rv ic e s
WWW S e rv ic e s
Bookmark
Menu 8-2
Goto
Menu 8-3
You can open any WWW page by entering its URL
address.
You can store the addresses of up to five Internet
sites for easy access using the Bookmark feature.
To enter the URL address directly, proceed as follows.
To access the Bookmark feature, proceed as follows.
1. In idle mode, press the Menu soft key.
1. In idle mode, press the Menu soft key.
2. Press
3. Press
for WWW Services.
2. Press
3. Press
for WWW Services.
for Goto.
for Bookmark.
4. Enter the URL address and press the Go soft key.
4. Highlight the required bookmark using the
or
key and press the Select soft key.
Navigating with the WAP Browser
5. Press the Options soft key.
Three options are available.
You can surf the Internet using either the phone keys
or the WAP Browser menu.
Edit: allows you to create or edit a local bookmark.
1. Enter the required title (up to 14 characters).
2. Press the OK soft key.
Using the Phone Keys
When surfing the Internet, the phone keys function
differently from the phone mode.
3. Enter the URL address (up to 128 characters).
4. Press the OK soft key.
To...
Then press the...
or
Go: allows you to open the selected page.
Scroll each line of the
content area
.
Delete: allows you to delete the selected bookmark.
Return to the previous page
key (except on
the homepage).
Return to the startup
homepage
key and hold it
down anywhere.
112
113
Download from Www.Somanuals.com. All Manuals Search And Download.
WWW S e rv ic e s
WWW S e rv ic e s
Advanced...: gives you access to the following
Using the WAP Browser Menu
advanced features. Some features may not be
supported by your network operator.
There are various menu options available when
surfing the Wireless Web.
Show URL: shows the URL of the current page.
HomePage: moves to the homepage.
To access the WAP Browser menu, proceed as
follows.
Offline Services: allows you to copy and save Web
pages so that you can view them, even if the network
is down.
1. Press
.
A list of menu options appears.
2. Highlight the required option using the
key.
or
Outbox: stores outgoing requests from the browser so
that they can be processed at a later date.
3. Press the OK soft key to select the option.
Restart Up.Browser: clears the cache memory and
displays the homepage.
4. If necessary, select the secondary option by
pressing the
or
key, followed by OK.
Encryption: allows you to check and generate the
security key required to contact a server.
Note: The WAP Browser menus may vary,
depending on your version of the browser.
Entering Text, Numbers, or Symbols
The following options are available.
When you are prompted to enter text, the current text
entry mode appears above the right soft key:
abc/Abc/ABC, NUM or SYM 1 ~ 4. To change modes,
press the right soft key until the required mode is
displayed.
Reload: reloads the current page.
Home: takes you back at any time to the homepage
of the Wireless Web service provider.
Bookmarks: allows you to load a bookmarked Web
page directly.
abc/Abc/ABC: allows you to enter lower-case and
upper-case letters. You can switch between lower-
Mark Site: adds the current page to your bookmark
list.
and upper-case letters by pressing the
key.
SYM1 ~ 4: allows you to enter various symbols and
punctuation marks. To view more symbols, press the
More soft key.
About Phone.com: shows the version of the WAP
Browser.
NUM: allows you to enter numbers.
114
115
Download from Www.Somanuals.com. All Manuals Search And Download.
WWW S e rv ic e s
Additional Services
If you wish to edit text, move the cursor to the
required position, using the
or
key and
clear the wrong letter by pressing the
enter the correct letter.
key. Then
ALS (Alternate Line Service)
Note: Please contact your service provider to check
the availability of this feature and how to
subscribe to it.
Network Connection Information
To check the network connection time, press and
The ALS feature enables two lines to be associated
with one SIM card. Consequently, you can make and
receive calls on either line as required. If you
subscribe to this network service, a few additional
menu options enable you to set up this feature.
hold down the
key. You can see the connection
time on the last line of the content area. The linger
time is one or more minutes (depending on your
service provider). Consequently, if you do not use the
browser for one or more minutes, the network is
disconnected automatically. In this case, you can see
that the connection time is stopped at that point.
The connection time is reset whenever you exit the
browser.
1. Selecting a Line
With the Active Line menu option (5-1-#), you can
set a line to be used automatically when you make a
call or you can select the line manually for each call.
For further details, refer to page 84.
2. Editing the Line Name
You can edit the name of each line via the Own
Number menu option (5-1-2).
When you edit the name of a line, the name is
displayed, whenever necessary, instead of “Line 1” or
“Line 2”. For further details, refer to page 80.
116
117
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad d it io n a l S e rv ic e s
3. Setting the Ring Type
To distinguish between incoming calls on the two
lines, you can select a different ring tone for each line
with the Ring Tone menu option (4-1). See page 73
for further details.
4. Setting Call Diverting Options
You can set up call diverting options for each line, via
the Call Diverting menu option (5-2-1). This service
enables you to divert calls received on a given line to
the number specified. See page 85 for further details.
118
Download from Www.Somanuals.com. All Manuals Search And Download.
Solving Problems
Before contacting the after-sales service, perform the
following simple checks. They may save you the time
and expense of an unnecessary service call.
When you switch your phone on, the following
messages appear
Insert SIM Card
• Check that the SIM card is correctly installed.
Phone Locked
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
• The option requiring that the PIN be entered each
time the phone is switched on has been enabled.
You must enter your PIN and then disable this
option if so required.
Enter PUK
• The PIN code was entered wrongly three times in
succession and the phone is now blocked. Enter
the PUK supplied by your network operator.
119
Download from Www.Somanuals.com. All Manuals Search And Download.
S o lv in g P ro b le m s
S o lv in g P ro b le m s
“No service” is displayed
The phone starts beeping and “** Warning **
Battery Low” flashes in the display
• The battery is insufficiently charged. Replace the
battery with a charged one and recharge it.
• The network connection was lost. You may be in a
weak reception area (in a tunnel or surrounded by
buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
The audio quality of the call is poor
• Check the signal strength indicator in the display
(
); the number of bars after it indicates the
signal strength from strong ( ) to weak ( ).
You have entered a number but it was not dialled
• Try moving the phone slightly or moving closer to
a window if you are in a building.
• Have you pressed
?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
No number is dialled when you recall a
phonebook entry
• Check that the numbers have been stored
correctly, by using the Phonebook Search feature.
• Re-store them, if necessary.
Your correspondent cannot reach you
• Is your phone switched on ( pressed for more
than one second)?
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
If the above guidelines do not enable you to solve
the problem, take a note of:
• The model and serial numbers of your phone
• Your warranty details
Your correspondent cannot hear you speaking
• Have you switched off the microphone
(
appears)?
• A clear description of the problem
• Are you holding the phone close enough to your
mouth? The microphone is located in the bottom
centre of the phone.
Then contact your local dealer or SAMSUNG
after-sales service.
120
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Re f e re n c e In f o rm a t io n
Reference Information
PIN
The PIN (Personal Identification Number) protects
your SIM card against unauthorised use. The PIN is
usually supplied with the SIM card. When the PIN
Check feature is enabled (menu option 5-3-1), the
PIN is needed each time the phone is switched on.
Access Codes
There are several access codes that are used by your
phone and its SIM card. These codes help you protect
the phone against unauthorised use.
If you key in an incorrect PIN three times in
The access codes (except for the PUK and PUK2
codes) can be changed using the Security Settings
menu options (5-3). See page 93 for further details.
succession, key in the PUK and press the OK soft key
Key in a new PIN and press the OK soft key. Key in
the new PIN again and press the OK soft key.
.
Phone Password
PIN2
The PIN2, supplied with some SIM cards, is required
to access specific functions, such as call cost
counters. These functions are only available if
supported by your SIM card.
The phone password can be set to avoid unauthorised
use of the phone. The password generally supplied
with the phone is 0000. You are advised to change it
before you start using your phone.
If you key in an incorrect PIN2 three times in
succession, key in the PUK2 and press the OK soft
key. Key in a new PIN2 and press the OK soft key.
Key in the new PIN2 again and press the OK soft
key.
Keep the new password secret and in a safe place,
separate from the phone.
122
123
Download from Www.Somanuals.com. All Manuals Search And Download.
Re f e re n c e In f o rm a t io n
Re f e re n c e In f o rm a t io n
PUK
Using the Batteries
The PUK (Personal Unblocking Key) is required to
change a blocked PIN. The PUK may be supplied with
the SIM card. If not, contact your local service
provider.
Your phone is powered by a rechargeable Li-ion
standard battery.
Precautions When Using Batteries
If you key in an incorrect PUKten times in
succession, the SIM card cannot be used anymore.
Contact your service provider for a new card.
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
You cannot change the PUK. If you lose it, contact
your service provider.
• If you use the phone near the network’s base
station, it uses less power; talk and standby times
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
PUK2
The PUK2, supplied with some SIM cards, is required
to change a blocked PIN2.
• Battery charging times depend on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time
to buy a new battery.
If you key in an incorrect PUK2ten times in
succession, you cannot use the functions requiring
the PIN2. Contact your service provider for a new
card.
You cannot change the PUK2. If you lose it, contact
your service provider.
• If left unused, a fully charged battery will
discharge itself over time.
Barring Password
The 4-digit barring password is required when you use
the Call Barring function. You obtain the password
from your service provider when you subscribe to this
function.
124
125
Download from Www.Somanuals.com. All Manuals Search And Download.
Re f e re n c e In f o rm a t io n
Re f e re n c e In f o rm a t io n
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-approved
chargers. When a charger is not in use, disconnect
it from the power source. Do not leave the battery
connected to a charger for more than a week,
since overcharging may shorten its life.
Safety Information
Road Safety
• Remember, road safety always comes first!
• Do not use a hand-held phone while driving a
vehicle. Always park the vehicle before having a
conversation.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Make sure that the phone is stored safely and will
not fall or be broken in the event of a collision or
emergency stop.
• Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and life-time of the
• The use of an alert device to operate a vehicle’s
lights or horn on public roads is not permitted.
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Only qualified personnel should install or service
the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the unit.
• Do not short-circuit the battery. Accidental short
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the back of the battery), for example when
you carry a spare battery in a pocket or bag.
Short-circuiting the terminals may damage the
battery or the object causing the short-circuit.
• Electronic fuel injection, anti-skid braking,
electronic cruise control or any other electronic
systems may malfunction due to the lack of
protection from radio signals. Check regularly that
all cellular phone equipment in your vehicle is
mounted and operating correctly.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
126
127
Download from Www.Somanuals.com. All Manuals Search And Download.
Re f e re n c e In f o rm a t io n
Re f e re n c e In f o rm a t io n
Operating Environment
• Switch off your cellular phone when in aircraft.
The use of cellular phones in aircraft is illegal and
may be dangerous to the operation of the aircraft
or disrupt the cellular network. Failure to observe
these instructions may lead to the suspension or
denial of cellular telephone services to the
offender, legal action or both.
• Remember to follow any special regulations in
force in any area and always switch off your
phone whenever it is forbidden to use it, or when
it may cause interference or danger (in a hospital
for example).
• Operation of any radio transmitting equipment,
including cellular phones, may interfere with
inadequately protected medical devices. Consult
a doctor or the manufacturer of the medical
device if you have any questions. Other electronic
equipment may also be subject to interference.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfil the warranty
obligations and enjoy this product for many years.
• As with other mobile radio transmitting equipment,
you are advised that for satisfactory operations
and personal safety, the equipment should only be
used in the normal operating position.
• Keep the phone and all its parts and accessories
out of the reach of small children.
• The effect of the GSM transmit/duty cycle on
hearing aids and pacemakers is being
investigated, and there is a potential hazard
associated with use close to such personal
medical electronic devices.
• Keep the phone dry. Precipitation, humidity and
liquids containing minerals will corrode the
electronic circuits.
• Do not use or store the phone in dusty, dirty areas
as its components may be damaged.
• Always switch off the phone when at a refuelling
point (service station). You are reminded of the
need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and
distribution areas), chemical plants or where
blasting operations are in progress.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal temperature,
moisture can form inside the phone, which may
damage the electronic circuits.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
128
129
Download from Www.Somanuals.com. All Manuals Search And Download.
Re f e re n c e In f o rm a t io n
• Do not attempt to open the phone. Non-expert
handling of the phone may damage it.
• Do not drop or knock the phone. Rough handling
may damage the internal circuits.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with
a soft cloth slightly dampened in mild, soapy water.
• If the phone or any of its accessories are not
working properly, take them to your nearest
qualified service centre. The personnel there will
assist you, and if necessary, arrange for the phone
to be repaired.
Emergency Calls
Important!This phone, like any cellular phone, uses
radio signals, cellular and landline
networks, as well as user-programmed
functions that cannot guarantee
connection in all conditions. Therefore,
you should never rely solely on any
cellular phone for essential communi-
cations (medical emergencies for example).
Remember, to make or receive any calls, the phone
must be switched on and in a service area with
adequate cellular signal strength.
Emergency calls may not be possible on all cellular
phone networks or when certain network services
and/or phone features are in use. Check with local
cellular service providers.
130
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
To help you understand the main technical terms and
abbreviations used in this booklet and take full
advantage of the features on your mobile phone, here
are a few definitions.
ALS (Alternate Line Service)
Capability of associating two alternate lines with one
SIM card. You can make and receive calls on either
line as required.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Diverting
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call Waiting
Ability to inform users that they have an incoming call
when engaged on another call.
131
Download from Www.Somanuals.com. All Manuals Search And Download.
Glo s s a ry
Glo s s a ry
GSM (Global System for Mobile Communication)
PUK (PIN Unblocking Key)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Line Identification Services
Roaming
Service allowing subscribers to view or block the
telephone numbers of callers.
Use of your phone when you are outside your home
area (when travelling for example).
Multiparty Calling
SIM (Subscriber Identification Module)
Ability to establish a conference call involving up to
five additional parties.
Card containing a chip with all the information
required to operate the phone (network and memory
information, as well as the subscriber’s personal
data). The SIM card fits into a small slot on the back
of the phone and is protected by the battery.
Phone Password
Security code used to unlock the phone when you
have selected the option to lock it automatically each
time it switches on.
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to speak
to the correspondent. The message created or
received (up to 160 characters long) can be
displayed, received, edited or sent.
PIN (Personal Identification Number)
Security code that protects the phone/SIM card
against unauthorised use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
132
133
Download from Www.Somanuals.com. All Manuals Search And Download.
Glo s s a ry
Index
Soft Keys
Calls (continued)
A
redialling • 23
ABC text mode • 38
Access codes • 122
Accessories • 9
Keys marked
of which:
• Varies according to the function that you are
currently using
• Is indicated on the bottom line of the display just
above the corresponding key
and
on the phone, the purpose
automatically • 82
rejecting • 25
searching for a number in
the phonebook • 46
time (1-4) • 56
Active Line (5-1-#) • 84
Alarm (6-2) • 101
Alert Type (4-4) • 45; 76
ALS • 117
via the phonebook • 41
waiting (5-2-3) • 89
Answering
Card
installing SIM• 15
Care • 129
Changing
call barring
password • 89
password (5-3-4) • 95
PIN (5-3-2) • 94
PIN2 (5-3-7) • 96
text modes • 36
Characters
changing modes • 36
entering • 35
a call• 25
a second call• 31
Any-key Answer (5-1-4) • 81
Auto Answer (5-1-8) • 82
Auto Redial (5-1-7) • 82
Voice Mail
Computerised answering service that automatically
answers your calls when you are not available, plays
a greeting (optionally in your own voice) and records
a message.
B
Backlight • 14; 81
Barring
calls (5-2-2) • 87
password • 89; 124
Batteries
charging • 18
Charging batteries • 18
Clock (6-5) • 106
type• 97
Closed User Group
(5-2-6) • 92
Colour
service light• 14; 97
Composer
Melody (4-2) • 74
Conference calls • 32
Connect
to Voice Mail (2-1-1) • 58
Tone (4-9) • 78
Contrast (5-4-3) • 97
Copying phonebook
numbers • 44
Cost of calls• 57
CUG (5-2-6) • 92
installing • 15
low battery indicator • 19
precautions • 125
Broadcast (2-6) • 63
Browser
settings (5-5) • 98
using (8) • 111
C
Calculator (6-3) • 103
Caller ID (5-1-9) • 83
Calls
answering • 25
a second call • 31
barring (5-2-2) • 87
cost (1-5) • 57
dialled (1-3) • 56
diverting (5-2-1) • 85
emergency • 8; 130
ending • 23
holding • 30; 89
international • 22
making • 22
D
Date
format (6-5-3) • 106
setting (6-5-2) • 106
Deleting
missed calls • 27
phonebook numbers • 44
schedules • 101
missed (1-1) • 26; 55
multiparty • 32
received (1-2) • 55
records (1) • 55
134
135
Download from Www.Somanuals.com. All Manuals Search And Download.
In d e x
In d e x
Dialled Calls (1-3) • 56
Dialling • 22
Network Selection
(5-2-4) • 90
Picture Messages (2-7) • 64
PIN • 123
changing (5-3-2) • 94
checking (5-3-1) • 94
PIN2 • 123
changing (5-3-7) • 96
Preset Message
List (2-4) • 62
L
Language (5-1-3) • 81
Last number redialling • 23
automatic • 82
LCD
Display • 12
Network Services (5-2) • 84
Numbers
contrast • 97
icons • 13
copying phonebook• 44
correcting• 22
editing
missed call• 27
phonebook• 44
entering• 40
language • 77
layout • 12
Diverting calls (5-2-1) • 85
settings (5-4) • 96
LED indicator • 14
Length of calls • 56
Letters
E
Problem solving • 119
PUK • 124
PUK2 • 124
Earpiece volume • 24
Editing
erasing phonebook• 44
fixed dial• 95
mode • 40
changing modes• 36
entering • 35
messages• 61
R
missed calls• 27
phonebook numbers• 44
schedules• 101
Emergency calls • 8; 130
Erasing
Line
Read Messages (2-2) • 59
Received calls (1-2) • 55
Records
own• 80
active • 84
redialling • 23
automatically• 82
searching/dialling• 46
storing• 41
identification (5-2-5) • 91
Locking
keypad • 21;83
phone (5-3-3) • 94
SIM card (5-3-5) • 95
Low battery indicator • 19
call (1) • 55
Redialling
missed calls • 27
phonebook numbers• 44
schedules• 101
Error Tone (4-7) • 78
automatically • 82
last number • 23
Rejecting calls • 25
O
Options
selecting • 48
Organiser (6) • 99
Own Number (5-1-2) • 80
Reset Settings (5-1- ) • 84
M
*
F
Ring
Maintenance • 129
Melody Composer (4-2) • 74
Memory status• 45
Menus • 50-54
Fixed Dial Number (FDN)
mode (5-3-6) • 95
Functions
tone (4-1) • 73
type • 76
P
volume (4-3) • 76
ringing tone messages • 76
Roaming • 90
selecting • 48
Password
Messages
barring • 124
broadcast (2-6) • 63
greeting (5-1-1) • 79
picture (2-7) • 64
preset (2-4) • 62
reading (2-2) • 59
ringing tone • 73
setup (2-5) • 62
G
changing • 89
Games (7) • 107
Greeting Message
(5-1-1) • 79
Groups
S
Safety
phone • 122
changing (5-3-4) • 95
Pasting numbers • 44
Phone
batteries • 125
information • 127
precautions • 7
Scheduler (6-1) • 99
preset (2-4) • 62
SDN • 47
user • 92
Lock (5-3-3) • 94
password • 95; 122
settings (5-1) • 79
Phonebook • 41
alert tone • 45
colours • 45
copying numbers • 44
dialling • 46
editing numbers • 44
erasing numbers • 44
making calls • 23; 46
memory status • 45
options • 43
pasting numbers • 44
ring tones • 45
searching/dialling • 46
storing numbers/
names • 41
H
tone (4-6) • 77
Holding calls • 30; 89
voice mail (2-1) • 58
writing (2-3) • 61
Microphone mute • 28
Minute Minder (4-8) • 78
Missed calls (1-1) • 26; 55
Multiparty calls • 32
Mute
Searching for names/
numbers • 46
Security (5-3) • 93
Selecting functions/
options • 48
I
Icons • 13
Identifying a caller • 83
Image
screen • 96
Sending
key tones • 34
microphone • 28
key tones • 34
messages • 61
Service
K
Key tones
muting • 34
N
Names
colours • 97
selecting • 77
sending • 34
volume • 24
Keypad locking • 83
Keys • 10; 11
dialling numbers
(SDN) • 47
entering • 35
searching/dialling • 46
storing in the
light (5-1-6) • 14; 82
phonebook • 41
136
137
Download from Www.Somanuals.com. All Manuals Search And Download.
In d e x
Settings
U
alarm • 101
User groups • 92
browser • 98
date• 106
language• 80
LCD • 96
network • 84
phone • 79
reset • 84
security • 93
service colour • 97
time • 106
Setup (2-5) • 62
Silent mode • 11
SIM card
V
Vibration • 76
Voice Active (3-4) • 71
Voice Command (3-2) • 69
Voice Dial (3-1) • 66
activating • 67
deleting numbers • 68
playing recorded
names/numbers• 60
recording • 67
earpiece • 24
Voice Functions (3) • 66
Voice Memo (3-3) • 69
deleting • 70
installing • 15
locking (5-3-5) • 95
precautions • 15
SMS
recording • 70
replaying • 70
see Messages
Soft keys • 48
Solving problems • 119
Speed dialling • 45
Switching on/off
microphone• 28
phone• 20
Voice Server Number
(2-1-2) • 59
Volume adjustment
earpiece • 24
game • 107
keypad • 24
ring (4-3) • 76
Symbolic mode• 40
W
Waiting
T
Text
calls • 30; 89
changing modes • 36
entering • 35
Time
call (1-4) • 56
format • 106
setting (6-5-1) • 106
world (6-4) • 105
Tone
WAP Browser • 111
World Time (6-4) • 105
Write Messages (2-3) • 61
WWW Services (8) • 111
connect (4-9) • 78
error (4-7) • 78
keypad (4-5) • 77
melody • 74
message (4-6) • 77
ring (4-1) • 73
Travel adapter • 18
T9 mode • 36
138
139
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|