SYSTEM ACCESS CODES
The DCS telephone system has the following pre-set (default) feature
access codes. These codes can be used if a key is not available for
the feature you want to use. Standard telephone users must always
dial these codes.
9
Call attendant or system
operator
54+zone Meet Me Page
55 + 0
55 + 1
55 + 2
55 + 3
55 + 4
55 + 5
55 + 6
55 + 7
55 + 8
55 + 9
55 + ✱
56
Page all internal zones
10 + xxx
11
Retrieve parked calls
Put calls on and take calls off
hold
Page internal zone 1
Page internal zone 2
Page internal zone 3
Page internal zone 4
Page external zone 1
Page external zone 2
Page external zone 3
Page external zone 4
Page all external zones
All Page
12 +xxx
Retrieve calls on hold at another
station
13
Door lock release
16 + xxx
17
Make speed dial calls
Save number and redial it
Recall dial tone for new call
Last number redial
Extension numbers
Extension numbers
Cancel Do not Disturb
Set Do Not Disturb
Set Message No Ring
Cancel message
18
19
2xx
3xx
400
401
41
Meet Me Answer
57
Alarm sensor clear
DISA alarm clear
58
59
Walking class of service
Cancel all call forwarding
600
42 + xxx
43
601 + xxx Set Forward All Calls
602 + xxx Set Forward Busy
603 + xxx Set Forward No Ans
604 + xxx Set Fwd Busy/No Ans
605 + xxx Set Fwd Follow me
Set/return messages
Busy station/line callback
Busy station camp-on
Set up a conference
Enter account code
Set programmed station
message
44
45
46
47
65
Directed call pickup
Group call pickup
Universal Answer
Voice Dialler
48
66
67
49
Send flash to outside line
Station hunt group
681
682
7xx
8x
500
to
Voice Dialler Record
Individual line numbers
Line groups
529
Station hunt group
53+grp+0 Out of group
53+grp+1 In group
0
Line group 0 (Local)
Where xxx is a line, extension or group number
CODE: GA68-60747A
ED: 01
AUGUST 1998
Printed In Korea
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK REFERENCE GUIDE
SAMSUNG
DS-2100B
AUGUST 1998
Download from Www.Somanuals.com. All Manuals Search And Download.
DS-2100B Layout
Volume Control Keys
Used to set independent
SPEAKER
For handsfree operation
and ringing
levels for handset, speaker,
ring and page volume
Multi-Function Lamp
Indicates call progresses
1. Fast flickering indicates a
new incoming call
2. Slow flikering indicates
any message left on you
3. Any steady lamp indicates
speakerphone mode
SPEAKER KEY Used to switch
call to speakerphone
MICROPHONE
For handsfree operation
Redial Key
For Last Number Redial
Memory Key
Used for Speed Dialling
TRANSFER Key
For transferring a call
1
Download from Www.Somanuals.com. All Manuals Search And Download.
THINGS YOU SHOULD KNOW
USER ORIENTATION
The system automatically numbers the various system resources as
follows:
System Extensions
Outside Lines
Station Groups
201, 202, 203,........etc
701, 702, 703.........etc
500 -529
These are the normal setting however your Samsung Communication
Specialist may have changed the system to meet your Company's
specific requirements. Please see your System Administrator.
SPEAKERPHONE
Pressing the Speakerkey will answer or release a call on the speaker
phone.
Switching from the handset to the speaker phone is easy. Press the
Speakerkey and hang up the handset.
The Multi-Function Lamp will steady on when you are using speaker
phone.
OUTSIDE CALLS
MAKING AN OUTSIDE CALL
• Lift the handset or press the Speaker key and dial the outside
line access code
• Dial the telephone number
• Finish the call by replacing the handset or pressing the Speaker key.
ANSWERING AN OUTSIDE CALL
• Lift handset and you are automatically connected to the ringing call
OR
• Press the Speaker key to answer on the speakerphone.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
SENDING A FLASH
While on an outside call, press the TRSF and dial 49 to send a flash
to the telephone company.
BUSY LINE QUEUING WITH CALL-BACK
If you receive busy signal when you are selecting outside line,
• Dial 44 and you will hear confirmation tone.
• When the line becomes free the system will call you back.
• Lift the handset or press Speaker key to answer.
INTERCOM CALL
MAKING A CALL
• Dial the extension number or group number.
• Wait for the party to answer. If you hear a brief tone burst
instead of ringback tone, the station you called is set for Voice
announce or Auto answer. Begin speaking immediately after the tone.
• Finish the call by replacing handset or press Speakerkey.
ANSWERING INTERCOM CALLS
• Lift the handset -OR- press the Speakerkey.
• To finish the call, replace the handset or press the Speakerkey.
BUSY STATION CALLBACK
When you call another station and receive a busy signal:
• Dial 44 and you will hear confirmation tone.
• When the busy station becomes free, your keyset will ring.
• Lift the handset or press Speakerkey to call the now idle station.
BUSY STATION CAMP-ON
When you call another station and receive a busy signal:
• Dial 45
• The called station will receive off-hook ring tone.
• Wait for the called party to answer.
CALLING YOUR SYSTEM OPERATOR
• Dial 9 to call your system operator.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CALL PROCESSING
RETRIEVING CALLS HELD AT ANOTHER
STATION
When a line is on hold and it does not appear on your keyset,
• Dial 12 plus the line number or the extension number of the
station that placed the call on hold.
TRANSFERRING CALLS
• Press theTRSFkey and dial an extension number or group number.
• Hang up when you hear ringing
OR
• Wait for the called party to answer, announce the call and then
hang up.
• To return to outside party, press TRSF.
TRANSFER WITH CAMP-ON
• Transfer the call as per the above
• After hearing the busy signal just hang up
• The call will recall to your station if not answered within the
specified time.
CONFERENCE CALLS
While engaged in a conversation,
• Dial TRSF 46 and receive conference tone.
• Make another call, either intercom or outside, press TRSF key
and receive conference tone.
• Make another call or press the TRSF key to join all parties.
• Repeat last step until all parties are added.
STATION CALL PICKUP
To pick up (answer) a call ringing at another station:
• Lift your handset and dial 65 plus the extension number of the
ringing phone.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
GROUP CALL PICKUP
To pick up (answer) a call ringing in any pickup group,
• Lift your handset and dial 66 plus the desired group number
01-20
DIALLING FEATURES
SPEED DIALLING
• Press the Memorykey or dial 16.
• Dial the desired speed dial number location.
• The telephone number is automatically dialled for you.
PROGRAMMING PERSONAL SPEED
DIAL NUMBERS
To store telephone numbers in your personal speed dial list.
• While on-hook, press TRSF and then dial 105 .
• Dial a speed dial number (00-49).
• Dial a line or line group access code .
• Dial the telephone number to be stored (18 digits maximum).
It can include #, ✱.
• PressTRSF to store number.
LAST NUMBER REDIAL
• Press the Redialkey or dial 19.
PAGING AND MESSAGING
MAKING A PAGE CALL
To make an announcement through the keyset and/or external
speakers:
• Lift the handset and dial 55.
• Dial the desired zone number 1, 2, 3 or 4, for internal zones
5
Download from Www.Somanuals.com. All Manuals Search And Download.
|