Samsung CRT Television TXN2745FP TXN3245FP User Guide

TXN2771HF/TXN3071WHF  
TXN3271HF/TXN2798HF  
TXN3098WHF/TXN3298HF  
TXN2775HF/TXN3075WHF  
TXN3275HF/TXN2670WHF  
TXN2745FP/TXN3245FP  
TXN3234HF  
COLOR TELEVISION  
1-800-SAMSUNG (1-800-726-7864)  
Samsung Electronics America  
Service Division  
400 Valley Road, Suite 201  
Mount Arlington, NJ 07856  
Samsung Electronics Canada Inc.  
Samsung Customer Care  
7037 Financial Drive  
Mississauga, Ontario  
L5N 6R3  
.............  
Owner’s  
Instructions  
AA68-02942A-00  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning! Important  
Safety Instructions  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT  
REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
This symbol indicates high voltage is present inside. It is  
dangerous to make any kind of contact with any inside part of  
this product.  
This symbol alerts you that important literature concerning  
operation and maintenance has been included with this product.  
Note to CATV system installer: This reminder is provided to call CATV system  
installer’s attention to Article 820-40 of the National Electrical Code (Section 54 of  
Canadian Electrical Code, Part I), that provides guidelines for proper grounding  
and, in particular, specifies that the cable ground shall be connected to the  
grounding system of the building as close to the point of cable entry as practical.  
Caution: FCC/CSA regulations state that any unauthorized changes or modifica-  
tions to this equipment may void the users authority to operate it.  
Caution: To prevent electric shock, match the wide blade of plug to the wide slot,  
and fully insert the plug.  
Attention: pour eviter les chocs electriques, introduire la lame le plus large de la  
fiche dans la borne correspondante de la prise et pousser jusqu’au fond.  
Important: One Federal Court has held that unauthorized recording of  
copyrighted TV programs is an infringement of U.S. copyright laws.  
Certain Canadian programs may also be copyrighted and any unauthorized  
recording in whole or in part may be in violation of these rights.  
To prevent damage which may result in fire or electric shock  
hazard, do not expose this appliance to rain or moisture.  
As an ENERGY STAR Partner,  
Samsung Electronics America, Inc. has determined that this product or product  
model meets the ENERGY STAR guidelines for energy efficiency.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Thank You for Choosing Samsung  
Thank you for choosing Samsung! Your new Samsung TV represents the latest in television  
technology. We designed it with easy-to-use on-screen menus and closed captioning capabili-  
ties, making it one of the best products in its class. We are proud to offer you a product that  
will provide convenient, dependable service and enjoyment for years to come.  
Important Safety Information  
Always be careful when using your TV receiver. To reduce the risk of fire, electrical shock,  
and other injuries, keep these safety precautions in mind when installing, using, and  
maintaining your machine.  
• Read all safety and operating instructions before operating your TV.  
• Keep the safety and operating instructions for future reference.  
• Heed all warnings on the TV receiver and in the operating instructions.  
• Follow all operating and use instructions.  
• Unplug the TV receiver from the wall outlet before cleaning. Use a damp cloth; do not use  
liquid or aerosol cleaners.  
• Never add any attachments and/or equipment without approval of the manufacturer. Such  
additions can increase the risk of fire, electric shock, or other personal injury.  
• Do not use the TV receiver where contact with or immersion in water is a possibility, such as  
near bath tubs, sinks, washing machines, swimming pools, etc.  
• Do not place the TV on an unstable cart, stand, tripod, bracket, or  
table where it can fall. A falling TV can cause serious injury to a  
child or adult, and serious damage to the appliance. Use only with  
a cart, stand, tripod, bracket, or table recommended by the manu-  
facturer or sold with the TV. Follow the manufacturers instruc-  
tions when mounting the unit, and use a mounting accessory rec-  
ommended by the manufacturer. Move the TV and cart with care.  
Quick stops, excessive force, and uneven surfaces can make the  
unit and cart unsteady and likely to overturn.  
• Provide ventilation for the TV receiver. The unit is designed with slots in the cabinet for ven-  
tilation to protect it from overheating. Do not block these openings with any object, and do  
not place the TV receiver on a bed, sofa, rug, or other similar surface. Do not place it near a  
radiator or heat register. If you place the TV receiver on a rack or bookcase, ensure that there  
is adequate ventilation and that you’ve followed the manufacturers instructions for mount-  
ing.  
• Operate your TV receiver only from the type of power source indicated on the marking label.  
If you are not sure of the type of power supplied to your home, consult your appliance dealer  
or local power company.  
• Use only a grounded or polarized outlet. For your safety, this TV is equipped with a polarized  
alternating current line plug having one blade wider than the other. This plug will fit into the  
power outlet only one way. If you are unable to insert the plug fully into the outlet, try  
reversing the plug. If the plug still does not fit, contact your electrician to replace your outlet.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Protect the power cord. Power supply cords should be routed so that they won’t be walked  
on or pinched by objects placed on or against them. Pay particular attention to cords at  
plugs, convenience receptacles, and the point where they exit from the unit.  
• Unplug the TV from the wall outlet and disconnect the antenna or cable system during a  
lightning storm or when left unattended and unused for long periods of time. This will pre-  
vent damage to the unit due to lightning and power-line surges.  
• Avoid overhead power lines. An outside antenna system should not be placed in the vicinity  
of overhead power lines or other electric light or power circuits or where it can fall into such  
power lines or circuits. When installing an outside antenna system, be extremely careful to  
keep from touching the power lines or circuits. Contact with such lines can be fatal.  
• Do not overload the wall outlet or extension cords. Overloading can result in fire or electric  
shock.  
• Do not insert anything through the openings in the unit, where they can touch dangerous  
voltage points or damage parts. Never spill liquid of any kind on the TV.  
• Ground outdoor antennas. If an outside antenna or  
EXAMPLE OF  
ANTENNA GROUNDING  
cable system is connected to the TV, be sure the  
ANTENNA  
LEAD IN WIRE  
antenna or cable system is grounded so as to provide  
GROUND CLAMP  
some protection against voltage surges and built-up  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
static charges. Section 810 of the National Electrical  
ELECTRIC  
SERVICE  
Code, ANSI/NFPA No.70-1984, provides information  
GROUNDING  
EQUIPMENT  
CONDUCTORS  
(NEC SECTION 810-21)  
about proper grounding of the mast and supporting  
structure, grounding of the lead-in wire to an antenna  
GROUND CLAMPS  
discharge unit, size of grounding conductors, location  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
of antenna discharge unit, connection to grounding  
NEC — NATIONAL ELECTRICAL CODE  
electrodes, and requirements for the grounding elec-  
trode.  
• Do not attempt to service the TV yourself. Refer all servicing to qualified service personnel.  
Unplug the unit from the wall outlet and refer servicing to qualified service personnel under  
the following conditions:  
- when the power-supply cord or plug is damaged  
- if liquid has been spilled on the unit or if objects have fallen into the unit  
- if the TV has been exposed to rain or water  
- if the TV does not operate normally by following the operating instructions  
- if the TV has been dropped or the cabinet has been damaged  
- when the TV exhibits a distinct change in performance  
• If you make adjustments yourself, adjust only those controls that are covered by the operat-  
ing instructions. Adjusting other controls may result in damage and will often require exten-  
sive work by a qualified technician to restore the TV to normal.  
• When replacement parts are required, be sure the service technician uses replacement parts  
specified by the manufacturer or those that have the same characteristics as the original part.  
Unauthorized substitutions may result in additional damage to the unit.  
• Upon completion of any service or repairs to this TV, ask the service technician to  
perform safety checks to determine that the TV is in a safe operating condition.  
This device complies with part 15 of the FCC Rules. Operation is subject to the  
following two conditions:  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference that may cause undesired operation.  
This television receiver provides display of television closed captioning in accordance  
with §15.119 of the FCC rules.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Warranty Information  
Regarding Television Format  
Viewing  
Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are  
primarily designed to view standard format full-motion video. The images displayed on  
them should primarily be in the standard 4:3 ratio format and constantly moving.  
Displaying stationary graphics and images on screen, such as the dark top and bottom  
letterbox bars (wide screen pictures), should be limited to no more than 15% of the total  
television viewing per week.  
Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are  
primarily designed to view wide screen format full-motion video. The images displayed  
on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the  
screen if your model offers this feature, and constantly moving. Displaying stationary  
graphics and images on screen, such as the dark side-bars on non-expanded standard  
format television video and programming, should be limited to no more than 15% of the  
total television viewing per week.  
Additionally, viewing other stationary images and text such as stock market reports,  
video game displays, station logos, web sites or computer graphics and patterns, should  
be limited as described above for all televisions. Displaying any stationary images that  
exceed the above guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle,  
but permanent burned-in ghost images in the television picture. To avoid this, vary the pro-  
gram-ming  
and images, and primarily display full screen moving images, not stationary patterns or  
dark bars. On television models that offer picture sizing features, use these controls to  
view the different formats as a full screen picture.  
Be careful in the selection and duration of television formats used for viewing. Uneven  
CRT aging as a result of format selection and use, as well as other burned-in images, is  
not covered by your Samsung limited warranty.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
Chapter 1: Your New TV . . . . . . . . . . . . . . . . 8  
List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Familiarizing Yourself with The TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Side Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Chapter 2: Installation. . . . . . . . . . . . . . . . . 14  
Connecting VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Antennas with 300-ohm Flat Twin Leads . . . . . . . . . . . . . . . 14  
Antennas with 75-ohm Round Leads . . . . . . . . . . . . . . . . . . 15  
Separate VHF and UHF Antennas. . . . . . . . . . . . . . . . . . . . . 15  
Connecting Cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Cable without a Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Connecting to a Cable Box that Descrambles All Channels . . . . 16  
Connecting to a Cable Box that Descrambles Some Channels. . . . . 16  
Connecting a VCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Connecting an S-VHS VCR . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Connecting a Second VCR to Record from the TV. . . . . . . . . 20  
Connecting a DVD Player (480i/480p) . . . . . . . . . . . . . . . . . . . . . . . . 20  
Connecting a Digital TV Set-Top Box (480p/1080i). . . . . . . . . . . . . . . 21  
Connecting to Y,Pb,Pr. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Connecting to DVI (Digital Visual Interface) . . . . . . . . . . . . . 22  
Connecting a Camcorder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Installing Batteries in the Remote Control . . . . . . . . . . . . . . . . . . . . . . 24  
Chapter 3: Operation . . . . . . . . . . . . . . . . . . 25  
Turning the TV On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Plug & Play Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Viewing the Menus and On-Screen Displays . . . . . . . . . . . . . . . . . . . . 27  
Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Viewing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Selecting a Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Memorizing the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Selecting the Video Signal-source . . . . . . . . . . . . . . . . . . . . . 29  
Storing Channels in Memory (Automatic Method) . . . . . . . . 30  
Adding and Erasing Channels (Manual Method). . . . . . . . . . 31  
Changing Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Using the Channel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Directly Accessing Channels . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Using the PRE-CH Button to select the Previous Channel . . . 32  
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Using Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Labeling the Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Setting the Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Option 1: Setting the Clock Manually. . . . . . . . . . . . . . . . . . 34  
Option 2: Using the Local PBS Channel to  
Automatically Set the TV Clock . . . . . . . . . . . . . . . . . . . . . . 35  
Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Using Automatic Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
Customizing the Sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Using Automatic Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Viewing an External Signal Source . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
Chapter 4: Special Features. . . . . . . . . . . . . 42  
Customizing Your Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Setting Up Your Remote Control to Operate Your VCR (or DVD) . . 42  
Setting Up Your Remote Control to Operate Your Cable Box . . . . . 44  
Fine Tuning Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
LNA (Low Noise Amplifier). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
TM  
DNIe (Digital Natural Image engine) . . . . . . . . . . . . . . . . . . . . . . . . 48  
Digital Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50  
Changing the Color Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Using the R.Surf Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52  
Freezing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52  
Setting the On/Off Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Choosing a Multi-Channel Sound (MTS) Soundtrack . . . . . . . . . . . . . 55  
Extra sound settings (Turbo Sound, Surround, Auto Volume,  
Melody, BBE or Woofer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Viewing Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Viewing Picture-in-Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60  
Activating Picture-in-Picture . . . . . . . . . . . . . . . . . . . . . . . . . 60  
Selecting a Signal Source (External A/V) for PIP . . . . . . . . . . 61  
Changing the Size of the PIP Window. . . . . . . . . . . . . . . . . . 62  
Swapping the Contents of the PIP image and Main image. . . 63  
Changing the PIP Channel . . . . . . . . . . . . . . . . . . . . . . . . . . 64  
Using the V-Chip (USA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65  
Setting Up Your Personal ID Number (PIN) . . . . . . . . . . . . . 65  
How to Enable/Disable the V-Chip . . . . . . . . . . . . . . . . . . . . 66  
How to Set up Restrictions Using the “TV guidelines. . . . . . 66  
How to Set up Restrictions using the MPAA Ratings:  
G, PG, PG-13, R, NC-17, X. . . . . . . . . . . . . . . . . . . . . . . . . . 68  
How to Reset the TV after the V-Chip  
Blocks a Channel (“Emergency Escape”) . . . . . . . . . . . . . . . . 69  
Using the V-Chip (Canada) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70  
Setting Up Your Personal ID Number (PIN) . . . . . . . . . . . . . 70  
How to Enable/Disable the V-Chip . . . . . . . . . . . . . . . . . . . . 71  
How to Set up Restrictions Using the “TV guidelines. . . . . . 71  
How to Set up Restrictions using the MPAA Ratings:  
G, PG, PG-13, R, NC-17, X. . . . . . . . . . . . . . . . . . . . . . . . . . 73  
How to Set up Restrictions Using the Canadian English . . . . 74  
How to Set up Restrictions Using the Canadian French . . . 75  
How to Reset the TV after the V-Chip  
Blocks a Channel (“Emergency Escape”) . . . . . . . . . . . . . . . . 76  
Viewing the Demonstration. . . . . . . . . . . . . . . . . . . . . . . . . . 77  
Chapter 5: Troubleshooting. . . . . . . . . . . . . 78  
Identifying Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78  
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79  
Cleaning and Maintaining Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 79  
Using Your TV in Another Country. . . . . . . . . . . . . . . . . . . . . . . . . . . 79  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter One  
YOUR NEW TV  
List of Features  
Your TV was designed with the latest technology. This TV is a high-performance unit that  
includes the following special features:  
• Full Flat Screen  
• Easy-to-use remote control  
• Easy-to-use on-screen menu system  
• Automatic timer to turn the TV on and off  
• Adjustable picture and sound settings that can be stored in the TVs memory  
• Automatic channel tuning for up to 181 channels  
• A special filter to reduce or eliminate reception problems  
• Fine tuning control for the sharpest picture possible  
• A built-in multi-channel sound decoder for stereo and bilingual listening  
• Built-in, dual channel speakers  
• A special sleep timer  
• Headphone jack for private listening  
• 16:9 letter box format available depending upon source  
• Picture in Picture (TXN2798HF/TXN3098WHF/TXN3298HF)  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
YOUR NEW TV  
Familiarizing Yourself with The TV  
Front Panel Buttons  
The buttons on the front panel control your TVs basic features, including the on-screen  
menu. To use the more advanced features, you must use the remote control.  
TXN2771HF  
TXN3271HF  
TXN3071WHF  
The Touch-Sensitive buttons do  
not work.  
1. Did you use a light touch when  
pressing the buttons?  
2. Is the Power Plug correctly connect-  
ed to the outlet?  
3. Did you use your finger to touch the  
button(using a pen or pencil may not  
work)?  
TXN2670WHF  
TXN2798HF  
TXN3298HF  
TXN3098WHF  
TXN2775HF  
TXN3275HF  
TXN3075WHF  
TXN2745FP  
TXN3245FP  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
YOUR NEW TV  
TXN3234HF  
Œ
´
ˇ
TV/VIDEO  
Press to change between viewing TV programs  
and signals from other components.  
¨
ˆ
CH M and CH L  
Press to change channels. Also press to high-  
light various items on the on-screen menu.  
MENU  
Press to see an on-screen menu of your TV's  
features.  
STANDBY indicator  
Lights up when you turn the power off.  
Remote Control Sensor  
Aim the remote control towards this spot on the  
TV.  
VOL – , +  
Press to increase or decrease the  
volume. Also used to select items on the on-  
mscreen menu.  
Ø
POWER  
Press to turn the TV on and off.  
Side Panel Jacks  
You can use the side panel jacks to connect an A/V component that is used only occa-  
sionally, such as a camcorder or video game. (For information on connecting equipment,  
see pages 13-22.)  
Œ
AUDIO INPUT jacks  
Used to connect the audio signals from a camcorder or video  
game.  
´
VIDEO INPUT jack  
Used to connect a video signal from a camcorder or video  
game.  
ˇ
¨
SUPER VIDEO INPUT jack  
S-Video signal from an S-VHS VCR or DVD player.  
HEADPHONE jack  
Connect a set of external headphones to this jack for private  
listening.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
YOUR NEW TV  
Rear Panel Jacks  
Use the rear panel jacks to connect an A/V component that will be connected  
continuously, such as a VCR or a DVD player.  
Because there are two sets of input jacks, you can connect two different A/V  
components (i.e., a VCR and a DVD, 2 VCRs, etc.)  
For more information on connecting equipment, see pages 13 22.  
Œ
´
ˇ
AUDIO-VIDEO MONITOR  
OUTPUT jacks  
VHF/UHF jack  
Connect to an antenna or to a cable TV system.  
Connect to the audio/video input jacks of a  
recording VCR.  
SUB-WOOFER SPEAKER  
OUTPUT jack  
Note: The Monitor Out does not operate in  
Component 1 or 2 modes.  
(TXN3298HF/TXN3098WHF/  
TXN2798HF)  
,
¨,ˆAV INPUT jacks  
Video and Audio signals from VCRs, DVD players  
and similar devices.  
Note: The common jack of component 1 and  
AV2, component 2 and AV3 input jacks are  
exclusive relation with each other.  
Connect to the Sub-woofer speaker jack (built in  
Sub-woofer cable).  
˝
DVI AUDIO INPUT jacks  
(TXN3298HF/TXN3098WHF/  
TXN2798HF)  
Receives the digital audio signals from a set top  
box.  
COMPONENT 1 INPUT jacks  
(480i/480p/1080i)  
Connect to the audio and component output  
jacks of a DVD player or Set-Top Box.  
Note: Only black and white signals are output  
from a monitor in DVD/DTV mode.  
DIGITAL INPUT (Digital  
Visual Interface) jack  
(TXN3298HF/TXN3098WHF/  
TXN2798HF)  
Receives the digital video signals from a set top  
box.  
• TXN2745FP/TXN3245FP: 480i/480p only.  
Ø
COMPONENT 2 INPUT jacks  
(480i/480p/1080i)  
Connect to the audio and component output  
jacks of a DVD player or Set-Top Box.  
Note: Only black and white signals are output  
from a monitor in DVD/DTV mode.  
TXN2745FP/TXN3245FP: 480i/480p only.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
YOUR NEW TV  
Remote Control  
You can use the remote control up to about 23 feet from the TV. When using the remote,  
always point it directly at the TV.  
You can also use your remote control to operate your VCR and cable box. See page 41  
for details.  
Œ
´
POWER  
Turns the TV on and off.  
Ô
MODE  
Selects a target device to be con-  
trolled by the Samsung remote  
control (i.e., TV, Set Top Box, VCR,  
Cable box, or DVD).  
S.MODE  
Adjust the TV sound by selecting  
one of the preset factory settings  
(or select your personal, cus-  
tomized sound settings).  
Ò
PRE-CH  
Tunes to the previous channel.  
ˇ
¨
P.MODE  
TV/VIDEO  
Adjust the TV picture by selecting  
one of the preset factory settings  
(or select your personal, cus-  
tomized picture settings).  
Press to display all of the available  
video sources (i.e., AV1, AV2, AV3,  
S-VIDEO).  
Ú
Æ
CHL and CHM  
(Channel Up/Down)  
Press CHL or CHM to change  
channels.  
Number buttons  
Press to select channels directly  
on the TV.  
+100  
INFO  
Press to select channels over 100.  
For example, to select  
channel 121, press +100,then  
press 2and 1.”  
Press to see the time, channel,  
etc., on-screen. Also press to exit  
(quit) the menu system.  
ı
˜
EXIT  
Press to exit the menu.  
ˆ
Ø
VOL -, VOL  
+
Press to increase or decrease the  
volume.  
Up,Down,Left,  
Right (L,M,œ,)/  
ENTER  
Press to select highlight up, down,  
left, or right. While using the on-  
screen menus, press ENTER to  
activate (or change) a particular  
item.  
MUTE  
Press to temporarily cut off  
the sound.  
SLEEP  
Press to select a preset time inter-  
val for automatic shutoff.  
¯
TURBO  
MENU  
Displays the main on-screen  
menu.  
(TXN2771HF/TXN3071WHF/  
TXN3271HF/TXN2670WHF/  
TXN2775HF/TXN3275HF/  
TXN3075WHF/TXN2745FP/  
TXN3245FP/TXN3234HF)  
Press to turn the TURBO sound On  
or Off.  
P.SIZE  
Press to change the screen size.  
Your choices are Normal, Zoom1,  
Zoom2 or Wide screen.  
˘
MTS (Multichannel  
Television Stereo)  
Press to choose stereo, mono or  
Separate Audio Program (SAP  
broadcast).  
˝
R.SURF  
Press the R.SURF button to auto-  
matically return to a preferred  
channel after a user-preset time  
delay.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
YOUR NEW TV  
Remote Control  
¿
TV/COMPONENT  
Press to switch the TV, COMPO-  
NENT1, 2, or DIGITAL mode.  
STILL (Main picture)  
Press to stop the action during a  
particular scene. Press again to  
resume normal video.  
Note: The still function doesnt  
operate in Component 1, 2 mode.  
Note: The DIGITAL mode does  
work in TXN2798HF/  
TXN3098WHF/ TXN3298HF models.  
PIP Controls  
(TXN3298HF/TXN3098WHF/  
TXN2798HF)  
¸
˛
DNIe  
(TXN3298HF/TXN3098WHF/  
TXN2798HF)  
Activates DNIe (Digital Natural  
Image engine).  
PIP ON  
Press this button to control the PIP  
window.  
VCR Controls  
SIZE  
REW (Rewind)  
Press to rewind a tape in your  
VCR.  
Press to make the PIP window  
small, large, double screen or  
stock ticker window.  
STOP  
Press this button to stop a tape  
during play, record, rewind or  
fast forward. If the button is  
pressed during Full-Automatic  
play, the function will be can-  
celled.  
SWAP  
Exchanges the video signal that is  
currently displayed on the main  
screen with the signal in the PIP  
window.  
PLAY/PAUSE  
CH  
Press the PLAY/PAUSE button to  
play back prerecorded tapes or  
pause the tape.  
Displays the available channels in  
sequence (These buttons change  
channels in the PIP window only).  
FF  
RESET  
Press to fast forward the tape in  
your VCR.  
If your remote control is not func-  
tioning properly, take out the bat-  
teries and press the reset button  
for about 2~3 seconds. Re-insert  
the batteries and try using the  
remote control again.  
SET  
Use this button when you are set-  
ting up your remote control to  
operate your Set Top Box, VCR,  
Cable box, or DVD.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Chapter Two  
INSTALLATION  
Connecting VHF and UHF Antennas  
If your antenna has a set of leads that  
look like this, see “Antennas with  
300-ohm Flat Twin Leads,” below.  
If your antenna has one lead that looks  
like this, see “Antennas with 75-ohm  
Round Leads,” on page 15.  
If you have two antennas, see “Separate  
VHF and UHF Antennas,” on page 15.  
Antennas with 300-ohm Flat Twin Leads  
If you are using an off-air antenna (such as a roof antenna or rabbit ears) that has  
300-ohm twin flat leads, follow the directions below.  
1
Place the wires from the  
twin leads under the  
screws on the 300-75 ohm  
adaptor (not supplied).  
Use a screwdriver to  
tighten the screws.  
2
Plug the adaptor into the  
VHF/UHF terminal on the  
bottom of the back panel.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Antennas with 75-ohm Round Leads  
1
Plug the antenna lead into  
the VHF/UHF  
terminal on the bottom of  
the back panel.  
Separate VHF and UHF Antennas  
If you have two separate antennas for your TV (one VHF and one UHF), you must  
combine the two antenna signals before connecting the antennas to the TV.  
This procedure requires an optional combiner-adaptor (available at most electronics  
shops).  
1
Connect both antenna  
leads to the combiner.  
2
Plug the combiner  
into the VHF/UHF ter-  
minal on the bottom  
of the rear panel.  
Connecting Cable TV  
To connect to a cable TV system, follow the instructions below.  
Cable without a Cable Box  
Because this TV is  
1
cable-ready, you do not need a  
cable box to view unscrambled cable  
channels.  
Plug the incoming cable  
into the VHF/UHF  
antenna terminal on back  
of the TV.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Connecting to a Cable Box that Descrambles All Channels  
This terminal might be labeled  
“ANT OUT,” “VHF OUT,” or simply,  
“OUT.”  
1
Find the cable that is con-  
nected to the ANTENNA  
OUT terminal on your  
cable box.  
2
Connect the other end of  
this cable to the VHF/UHF  
antenna  
terminal on the back of  
the TV.  
Connecting to a Cable Box that Descrambles Some Channels  
If your cable box descrambles only some channels (such as premium channels), follow the  
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of  
coaxial cable. (These items are available at most electronics stores.)  
This terminal might be labeled  
ANT IN,” “VHF IN,or simply,  
IN.”  
1
Find and disconnect the  
cable that is connected to  
the ANTENNA IN  
terminal on your  
cable box.  
2
Connect this cable to a  
two-way splitter.  
3
Connect a coaxial cable  
between an OUTPUT ter-  
minal on the splitter and  
the IN terminal on the  
cable box.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
4
Connect a coaxial cable  
between the ANTENNA  
OUT terminal on the cable  
box and the B–IN terminal  
on the A/B switch.  
5
Connect another cable  
between the other OUT  
terminal on the splitter  
and the AIN terminal on  
the RF (A/B) switch.  
6
Connect the last coaxial  
cable between the OUT  
terminal on the RF (A/B)  
switch and the VHF/UHF  
terminal on the rear of the  
TV.  
After youve made this connection, set the A/B switch to the Aposition for normal viewing.  
Set the A/B switch to the Bposition to view scrambled channels. (When you set the A/B  
switch to B,you will need to tune your TV to the cable boxs output channel, which is usu-  
ally channel 3 or 4.)  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Connecting a VCR  
These instructions assume that you have already connected your TV to an antenna or a  
cable TV system (according to the instructions on pages 14-16). Skip step 1 if you have  
not yet connected to an antenna or a cable system.  
1
Unplug the cable or  
antenna from the back of  
the TV.  
2
Connect the cable or  
antenna to the  
ANTENNA IN terminal on  
the back of the VCR.  
3
Connect a coaxial cable  
between the ANTENNA  
OUT terminal on the VCR  
and the antenna  
terminal on the TV.  
A coaxial cable is usually included with a VCR. (If not, check your local electronics  
store).  
4
Connect a set of audio  
cables between the  
AUDIO OUT jacks on the  
VCR and the AUDIO  
jacks(AV1~AV3) on the TV.  
If you have a mono(non-stereo) VCR, use the Y-connector (not supplied) to hook up  
to the left and right audio input jacks of the TV. If your VCR is stereo, you must con-  
nect two cables.  
5
Connect a video cable  
between the VIDEO OUT  
jack on the VCR and the  
VIDEO jack(AV1~AV3) on  
the TV.  
Follow the instructions in Viewing a VCR or Camcorder Tapeto view your VCR tape.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Connecting an S-VHS VCR  
Your TV can be connected to an S-Video signal from an S-VHS VCR.  
(This connection delivers a better picture as compared to a standard VHS VCR.)  
1
To begin, follow steps  
13 in the previous  
section to connect the  
antenna or cable to your  
VCR and your TV.  
2
Connect a set of audio  
cables between the  
AUDIO OUT jacks on the  
VCR and the AUDIO  
INPUT 1 jacks on the TV.  
Make sure the jacks you are using are underneath the number 1.”  
3
Connect an S-video cable  
between the S-VIDEO OUT  
jack on the VCR and the  
S-VIDEO INPUT jack on  
the TV.  
An S-video cable is usually included with an S-VHS VCR. (If not, check your local  
electronics store.)  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Connecting a Second VCR to Record from the TV  
Your TV can send out signals of its picture and sound to be recorded by a second VCR.  
To do this, connect your second VCR as follows:  
1
Connect a set of audio  
cables between the  
AUDIO OUT jacks on the  
TV and the AUDIO IN  
jacks on the VCR.  
(The VCR input jacks might be either on the front or on back of the VCR.)  
2
Connect a video cable  
between the VIDEO OUT  
jack on the TV and the  
VIDEO IN jack on the VCR.  
Refer to your VCRs instructions for more information about how to record using this kind  
of connection.  
Connecting a DVD Player (480i/480p)  
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.  
1
Connect a set of audio  
cables between the AV-2  
INPUT(VCR) or AV-3  
INPUT(VCR) jacks on the  
TV and the AUDIO OUT  
jacks on the DVD player.  
2
Connect a video cable  
between the COMPO-  
NENT 1 INPUT (Y/V, PB,  
PR) or COMPONENT 2  
INPUT (Y/V, PB, PR)jacks  
on the TV and the DVD-  
OUT (Y, PB, PR) jacks on  
the DVD player.  
Note: For an explanation of Component video, see your DVD player's owner's manual.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Connecting a Digital TV Set-Top Box (480p/1080i)  
Connecting to Y,Pb,Pr  
Connect the Y, PB, and PR video outputs of the set-top box to their corresponding inputs on  
the TV. Next, connect the Left and Right audio from the set-top box to the corresponding L  
and R terminals on the TV. (The connections for a typical set-top box are shown below.)  
TXN2745FP/TXN3245FP: 480p only.  
1
Connect a coaxial cable  
between the ANTENNA  
OUT terminal on the Set  
Top Box and the antenna  
terminal on the TV.  
2
Connect a set of audio  
cables between the AV-3  
INPUT(VCR) or AV-2  
INPUT(VCR) jacks on the  
TV and the AUDIO OUT  
jacks on the Set Top Box.  
3
Connect a video cable  
between the COMPO-  
NENT 2 INPUT (Y/V, PB,  
PR) or COMPONENT 1  
INPUT (Y/V, PB, PR)jacks  
on the TV and the VIDEO  
OUT (Y, PB, PR) jacks on  
the Set Top Box.  
Note: For detailed information, refer to the Set Top Box instruction manual.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Connecting to DVI (Digital Visual Interface)  
(TXN3298HF/TXN3098WHF/ TXN2798HF)  
By inputting a high-bandwidth Digital Content Protection high-definition picture source  
to the DIGITAL INPUT jack on the TV, high-definition pictures can be displayed on the  
screen in their digital form. (This DIGITAL INPUT jack is for use in the future when  
High-bandwidth Digital Content Protection DTV decoders, DVD players and D-VHS are  
put on the market.)  
1
Connect a coaxial cable  
between the ANTENNA  
OUT terminal on the Set  
Top Box and the antenna  
terminal on the TV.  
2
Connect a set of audio  
cables between the  
AUDIO INPUT jacks on the  
TV and the AUDIO OUT  
jacks on the Set Top Box.  
3
Connect a DVI cable  
between the DIGITAL  
INPUT jack on the TV and  
the DVI OUT jack on the  
Set Top Box.  
Note  
The DIGITAL INPUT jack can only be use with 1080i and 480p picture signals.  
Set the DTV decoder DIGITAL OUTPUT jack output setting to 1080I OR 480P.  
For detailed information, refer to the Set Top Box instruction manual.  
The DIGITAL INPUT jack is not compatible with the picture signal of a personal computer.  
Use a DVI 25-pin cable (commercially available) in order to digitally connect the TV with a  
DTV decoder.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Connecting a Camcorder  
The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow  
you to view the camcorder tapes without using a VCR. (Also see Viewing an External Signal  
Sourceon page 41).  
1
Locate the A/V output  
jacks on the camcorder.  
They are usually found on  
the side or back of the  
camcorder.  
2
Connect an audio cable  
between the AUDIO OUT-  
PUT jack on the cam-  
corder and the AUDIO  
terminals on the TV.  
3
Connect a video cable  
between the VIDEO OUT-  
PUT jack on the cam-  
corder and the VIDEO ter-  
minal on the TV.  
The audio-video cables shown here are usually included with a Camcorder. (If not, check  
your local electronics store.) If your camcorder is stereo, you need to connect a set of two  
cables.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Installing Batteries in the Remote Control  
1
Slide the cover out com-  
pletely.  
Make sure to match the +and  
2
ends of the batteries with the  
Install two AAA size  
batteries.  
diagram inside the compartment.  
Remove the batteries and store  
them in a cool, dry place if you wont  
be using the remote control for a  
long time.  
3
Replace the cover.  
The remote control can be used up  
to about 23 feet from the TV.  
(Assuming typical TV usage, the bat-  
teries last for about one year.)  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter Three  
OPERATION  
Turning the TV On and Off  
Press the POWER button on the remote control.  
You can also use the POWER button on the front panel.  
Plug & Play Feature  
When the TV is initially powered On, five basic customer settings proceed automatically  
and subsequently: Setting the language, Video signal source, Ant. input check, Auto pro-  
gram, and Clock.  
1
Press the POWER button  
on the remote control.  
The message “Plug &  
Play” is displayed.  
It flickers for a little while  
and then the “Language”  
menu is automatically  
displayed.  
2
Press the œ or button  
to select the desired lan-  
guage. Press the MENU  
button to enter the lan-  
guage, and then the  
“Channel” menu is auto-  
matically displayed.  
3
Press the œ or button  
to select the desired video  
signal source.  
Press the MENU button to  
enter the video signal  
source, and then the  
“Ant Input check” is  
automatically displayed.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
4
Make sure that the  
antenna is connected to  
the TV. And then press the  
œ or button to activate  
"Auto Program" or  
press the MENU button to  
skip. (refer to “Auto  
program” on page 30.)  
5
Press the ENTER button to  
move to the hour or  
minute. Set the hour or  
minute by pressing the L  
or button. (refer to  
“Setting the clock” on  
page 34.)  
6
When you have finished,  
press the MENU button.  
The message “Enjoy your  
watching..” is displayed.  
7
If you want to reset this  
feature  
(1)Press the MENU button.  
(2)Press the button to  
select the Setup menu  
and press the ENTER  
button.  
(3)Press the button to  
select Plug & Play and  
press the ENTER button.  
The message “Plug &  
Play” is displayed.  
Note: Plug & Play feature doesn’t work when the V-chip is  
on or when in the A/V mode.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Viewing the Menus and On-Screen Displays  
Viewing the Menus  
The on-screen menus disappear  
from the screen after thirty seconds.  
1
With the power on, press  
the MENU button.  
The main menu appears  
on the screen. Its left side  
has five icons: Picture,  
Sound, Channel, Time and  
Setup.  
You can also use the MENU,  
CHANNEL, and VOLUME buttons  
on the control panel of the TV to  
make selections.  
2
Use the L and buttons to highlight one of the 5 icons. Then  
press the ENTER button to access the icon’s sub-menu.  
3
Press the MENU button to exit.  
Viewing the Display  
The display identifies the current channel and the status  
of certain audio-video settings.  
The on-screen displays  
1
disappear after ten seconds.  
Press the INFO button on  
the remote control.  
The on-screen display  
shows any or all of the fol-  
lowing: Active channel,  
the channel label, video  
source, the time, and the  
time remaining on the  
sleep timer.  
(“*” indicates a channel  
has been manually fine  
tuned.)  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Selecting a Menu Language  
1
Press the MENU button to  
display the menu.  
Press the button to  
select “Setup”, then press  
the ENTER button  
2
Press the œ or button  
to select the appropriate  
language: English,  
Español, or Français.  
3
Press the MENU button to  
exit.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Memorizing the Channels  
Your TV can memorize and store all of the available channels for both “off-air” (antenna)  
and cable channels. After the available channels are memorized, use the CH  
and  
CH  
buttons to scan through the channels. This eliminates the need to change chan-  
nels by entering the channel digits. There are three steps for memorizing channels:  
selecting a broadcast source, memorizing the channels (automatic) and adding and delet-  
ing channels (manual).  
Selecting the Video Signal-source  
Before your television can begin memorizing the available channels, you must specify the  
type of signal source that is connected to the TV (i.e., an antenna or a cable system).  
1
Press the MENU button to  
display the menu.  
Press the button to  
select “Channel”, then  
press the ENTER button  
2
Repeatedly press the  
œ or button to cycle  
through these choices:  
ANT (antenna) STD, HRC  
or IRC (all cable TV).  
Note: STD, HRC and IRC identify various types of cable  
TV systems. Contact your local cable company to identify  
the type of cable system that exists in your particular area.  
At this point the signal source has been selected. Proceed  
to “Storing Channels in Memory” (next page).  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Storing Channels in Memory (Automatic Method)  
1
First, select the correct  
signal source (ANT, STD,  
HRC, IRC). See steps 1~2  
on previous page.  
2
Press the L button to  
select “Auto program”.  
The TV automatically cycles  
through all of the available channels  
and stores them in memory. This  
takes about one to two minutes.  
3
Press the ENTER button.  
The TV will begin  
memorizing all of the  
available channels.  
Press MENU at any time to interrupt  
the memorization process and return  
to the Channel menu.  
After all the available  
channels are stored, the  
Auto program menu reap-  
pears. Press the MENU  
button to exit.  
Note: Channel auto program does not function when the V-chip is active.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Adding and Erasing Channels (Manual Method)  
1
Press the MENU button to  
display the menu.  
Press the button to  
select “Channel”, then  
press the ENTER button.  
2
Press the L or button  
to select “Add/Erase”,  
then press the ENTER but-  
ton.  
3
Press the button.  
Press the L or button  
or the number buttons to  
select the channel you  
want to add or erase.  
Press the MENU button.  
4
Press the L or button  
to select “Select”.  
Press the œ or button  
to select “Added” or  
“Erased”.  
Press the MENU button to  
exit.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Changing Channels  
Using the Channel Buttons  
1
Press the CH  
or CH  
button to change channels.  
When you press CH  
or CH  
, the TV changes channels in sequence. You will see all the  
channels that the TV has memorized. (The TV must have memorized at least three channels.)  
You will not see channels that were either erased or not memorized.  
Directly Accessing Channels  
Use the number buttons to quickly tune to any channel.  
1
Press the number buttons to go directly to a channel.  
For example, to select channel 27, press “2” then “7”.  
The TV will change channels when you press the  
second number.  
When you use the number buttons, you can directly select channels that were either erased or  
not memorized.  
To select a channel over 100, press the +100 button.  
(For channel 122, press “+100” then “2” then “2”.)  
To change to single-digit channels (0–9) faster, press “0” before the single digit.  
(For channel “4” press “0” then “4”.)  
Using the PRE-CH Button to select the Previous Channel  
To quickly switch between two  
channels that are far apart, tune to  
one channel, then use the number  
button to select the second channel.  
Then, use the PRE-CH button to  
quickly alternate between them.  
1
Press the PRE-CH button.  
The TV will switch to the last channel viewed.  
Adjusting the Volume  
Press VOL + or – VOL – to increase or decrease the volume.  
Using Mute  
At any time, you can temporarily cut off the sound using the Mute button.  
1
Press MUTE and the sound cuts off.  
The word “Mute” will appear in the lower-left corner of the  
screen.  
2
To turn mute off, press MUTE again, or simply press either the  
VOL + or VOL – button.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Labeling the Channels  
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,  
“PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a num-  
ber, “*”, or a blank. When the INFO button is pressed, the channel label will appear  
next to the channel number.  
1
Press the CH  
or CH  
button to tune to the channel  
that will be labeled.  
Note: You cannot select  
2
“Labeling” in the A/V mode.  
Press the MENU button to dis-  
play the menu, then press the  
button to select “Channel”.  
Press the ENTER button.  
3
Press the button to select  
“Labeling”.  
Press the button to begin  
labeling. The left-most field will  
be highlighted.  
(Each label has four fields.  
See top paragraph.)  
4
Press the L or button to  
select a letter, a number, “*”, or  
a blank. (Pressing the L or ꢀ  
button results in this sequence:  
A,B,...Z,*, blank,0,1,...9).  
5
Press the button to switch to  
the next field, which will be  
highlighted. Select a second  
letter or digit using the L and  
buttons, as above. Repeat  
the process to select the last  
two digits.  
Press the MENU button to set the label and clear the menus from  
the screen.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Setting the Clock  
Setting the clock is necessary in order to use the various timer features of the TV.  
Also, you can check the time while watching the TV (Just press the INFO button).  
Option 1: Setting the Clock Manually  
1
Press the MENU button to  
display the menu.  
Press the button to  
select “Time”, then press  
the ENTER button.  
When selecting the hours, be sure  
2
to select the proper time of day (AM  
or PM).  
Press the ENTER button  
again (the hours digits will  
be highlighted). Press the  
L or button repeatedly  
until the correct hour  
appears.  
You can change the hours by pressing  
the L or button repeatedly (or by  
holding down either of these buttons).  
The time will appear every time  
you press the INFO button.  
3
After the hour is entered,  
Press the button.  
(at this point the minutes  
digits will be highlighted).  
Press the L or button  
to select the correct min-  
utes.  
After selecting the correct  
minutes, press the but-  
ton.  
Press the MENU button to  
exit.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Option 2: Using the Local PBS Channel to Automatically Set the  
TV Clock  
1
Press the MENU button to  
display the menu.  
Press the button to  
select “Time”, then press  
the ENTER button.  
2
Press the button to  
select “Auto Clock Set”  
menu, then press the  
ENTER button.  
3
Press the button to  
select Auto clock set  
“On”.  
4
Press the button to  
select “PBS Channel”.  
While “PBS Channel” is  
selected, press the but-  
ton to activate the chan-  
nel-number field.  
Press the L and to  
select your local PBS  
channel.  
Press the MENU button.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
5
Press the button to  
select “Time Zone”.  
While “Time Zone” is  
selected, then press the  
œ or to change the  
Time zone.  
Sequence: ATL., EAST,  
CEN., MTN., PAC., ALAS.,  
HAW..  
6
Press the button to  
select “DST”(Daylight  
saving time). While “DST”  
is selected, press the œ or  
button to indicate “Yes”  
or “No”.  
The clock is set.  
Press the MENU button to  
exit.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Customizing the Picture  
You can use the on-screen menus to change the Contrast, Brightness, Sharpness, Color,  
Tint and according to personal preference. (Alternatively, you can use one of the  
“automatic” settings. See next page.)  
Note: The DNIe function appears  
in TXN2798HF/ TXN3098WHF/  
TXN3298HF models.  
1
Press the MENU button to  
display menu, then press  
the ENTER button.  
2
Press the button to  
select “Custom”, then  
press the ENTER button.  
(The words Contrast,  
Brightness, Sharpness,  
Color, and Tint will appear  
on the screen.)  
Press the L or button  
to select a particular item.  
After adjusting an item, the gauge  
will automatically disappear (after  
about 3 seconds).  
3
Press the œ or button  
to increase or decrease  
the value of a particular  
item.  
For example, if you select  
“Contrast,” pressing the  
button increases it.  
Press the MENU button to  
exit.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Using Automatic Picture Settings  
Your TV has three automatic picture settings (“Dynamic”, “Standard” and “Movie” ) that  
are preset at the factory. You can activate either Standard, Mild or Dynamic by pressing  
the P.MODE button (or by making a selection from the menu). Or, you can select  
“Custom” which automatically recalls your personalized picture settings.  
1
Press the MENU button to  
display the menu, then  
press the ENTER button.  
2
Press the œ or button  
to select the “Dynamic”,  
“Standard,” “Movie,” or  
“Custom” picture setting.  
Choose Dynamic for viewing the TV during the day or when there is bright-  
light in the room (only ANT and video mode).  
Choose Standard for the standard factory settings.  
Choose Movie when viewing the movie.  
Choose Custom if you want to adjust the settings accordings to personal  
preference (see “Customizing the Picture”, page 37).  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Customizing the Sound  
The sound settings can be adjusted to suit your personal perferences.  
(Alternatively, you can use one of the “automatic” settings. See next page.)  
Note: The BBE function appears  
in TXN2798HF/ TXN3098WHF/  
TXN3298HF models.  
1
Press the MENU button to  
display the menu.  
Press the button to  
select the “Sound”, then  
press the ENTER button.  
2
Press the button to  
select “Equalizer”, then  
press the ENTER button.  
3
Press the œ or button  
to highlight a particular  
item to be channel.  
Press the or L button  
to increase or decrease  
the value of a particular  
item.  
Press the MENU button  
exit.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Using Automatic Sound Settings  
Your TV has four automatic sound settings (“Standard,” “Music,” “Movie,” and “Speech”)  
that are preset at the factory. You can activate either Standard, Music, Movie or Speech  
by pressing the S.MODE button (or by making a selection from the menu). Or, you can  
select “Custom,” which automatically recalls your personalized sound settings.  
1
Press the MENU button to  
display the menu.  
Press the button to  
select the “Sound”, then  
press the ENTER button.  
2
Press the œ or button  
repeatedly to select the  
“Standard,” “Music,”  
“Movie,” “Speech” or  
“Custom” sound settings.  
Choose Standard for the standard factory settings.  
Choose Music when watching music videos or concerts.  
Choose Movies when watching movies.  
Choose Speech when watching a show that is mostly dialogue (i.e., news).  
Choose Custom to recall your personalized settings.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Viewing an External Signal Source  
You must select the appropriate mode in order to view the external signal on the TV.  
Quick way to access the external  
signal source: Just press the  
“TV/VIDEO” button on the remote  
control.  
1
Press the MENU button to  
display the menu.  
Press the button to  
select “Setup”, then  
press the ENTER button.  
2
Press the œ or button.  
You will switch between  
viewing the signals com-  
ing from equipment con-  
nected to the TV’s A/V  
jacks, and the TV signal.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter Four  
SPECIAL FEATURES  
Customizing Your Remote Control  
Your TV comes equipped with a “universal” remote control. In addition to  
controlling the TV, the universal remote can also operate a VCR, DVD and a cable box  
(even if your VCR and cable box are made by manufacturers other than Samsung).  
Note: The remote control might not be compatible with all DVD players, VCRs, and Cable boxes.  
Setting Up Your Remote Control to Operate Your VCR (or DVD)  
1
Turn off your VCR.  
The remote control has four  
2
“modes”: “TV, “VCR”, “Cable” and  
Press the MODE button and make sure that the VCR (or DVD)  
“DVD.” Press the “MODE” button to  
switch the remote control to the “VCR”  
(or DVD) mode.  
LED is illuminated.  
3
On your Samsung remote control, press the SET button.  
Make sure you enter 3 digits of the  
code, even if the first digit is a “0.”  
4
Enter 3 digits of the VCR (or DVD) code listed on the next  
page for your brand of VCR (or DVD).  
If more than one code listed, try the first  
one.  
If your VCR (or DVD) does not turn  
on, repeat steps 2, 3, and 4, but try one of  
the other codes listed for the brand of  
your particular VCR (or DVD).  
5
Press the POWER button on the remote control. Your VCR  
(or DVD) should turn on. If your VCR (or DVD) turns on, your  
remote control is now set correctly.  
If no other codes are listed, try each code,  
000 through 088.  
When your remote control is in the  
“VCR” (or DVD) mode, the volume but-  
tons still control your TV’s volume.  
6
Once your remote control is set up, press the MODE button  
any time you want to use the remote to operate your VCR (or  
DVD).  
When your remote is in the “TV” mode,  
the VCR control buttons (PLAY, PAUSE,  
etc.) will still operate your VCR.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
VCR Codes  
DVD Codes  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Setting Up Your Remote Control to Operate Your Cable Box  
1
Turn off your cable box.  
The remote control has four  
“modes”: “TV”, “VCR”, “Cable” and  
“DVD”.  
2
Press the MODE button and make sure that the CABLE LED  
is illuminated.  
Press the “MODE” button to switch the  
remote control to the “Cable” mode.  
3
On your Samsung remote control, press the SET button.  
Make sure you enter 3 digits of the  
code, even if the first digit is a “0.” (If  
more than one code listed, try the first  
one.)  
4
Enter 3 digits of the cable box code listed below for your  
brand of cable box.  
If your cable box does not turn on,  
repeat steps 2, 3, and 4, but try one of the  
other codes listed for your particular  
brand of cable box (If no other codes are  
listed, try each cable box code, 000  
through 077).  
5
Press the POWER button. Your cable box should turn on. If your  
cable box turns on, your remote control is now “set up” correctly.  
When your remote control is  
6
in the “CABLE” mode, the volume but-  
tons still control your TV’s volume. Also,  
the VCR control buttons (PLAY, PAUSE,  
etc.) will still operate your VCR.  
Once your remote control is set up, press the MODE button  
any time you want to use the remote to operate your cable  
box.  
Cable Box Codes  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Fine Tuning Channels  
Use fine tuning to manually adjust a particular channel for optional reception.  
1
Press MENU to display  
the menu.  
Press the M button to  
select the “Channel”, then  
press the ENTER button.  
2
Press the M button to  
select “Fine tune”.  
After you adjust the fine tuning,  
3
“*” will appear when you press  
INFO while watching this channel.  
Press the œ or button  
to adjust the fine tuning.  
4
To store the fine tuning  
setting in the TV’s memory,  
press the L button.  
(“*” will appear).  
To reset the fine tuning to  
“oo”, press the M button.  
Press the MENU button to  
exit.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
LNA (Low Noise Amplifier)  
(TXN2798HF/TXN3098WHF/TXN3298HF)  
If the TV is operating in a weak-signal area, sometimes the LNA function can improve  
the reception (a low-noise preamplifier boosts the incoming signal).  
1
Select the appropriate  
channel.  
Press MENU to display  
the menu.  
Press the M button to  
select the “Channel”, then  
press the ENTER button.  
2
Press the M button to  
select “LNA”.  
Pressing œ or will alternate  
between “On” and “Off.”  
3
Press the œ or button  
to select LNA “on.”  
Press the MENU button to  
exit.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Tilt  
Due to the Earths magnetic field there may be same minor image tilt depending on the  
TVs location. When this occurs, follow the steps below.  
1
Press the MENU button to  
display the menu, then  
press the ENTER button.  
2
Press the M button to  
select “Tilt”.  
3
Press the œ or button  
to adjust the Tilt.  
Press the MENU button to  
exit.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
TM  
DNIe (Digital Natural Image engine)  
TXN2798HF/TXN3098WHF/TXN3298HF  
Samsungs New Technology enables an improved image with detail, contrast and white  
enhancement and 3D noise reduction.  
1
Press the MENU button to  
display the menu, then  
press the ENTER button.  
2
Press the M button to  
select “DNIe”.  
3
Press the œ or button  
to select DNIe “Off”, “On”  
or “Demo”.  
Press the MENU button to  
exit.  
On: Switches on the DNIe mode.  
DNIe Demo  
Demo: The screen before applying  
DNIe appears on the right  
and the screen after applying DNIe  
appears on the left.  
DNIe On  
DNIe Off  
Off: Switches off the DNIe mode.  
NOTE  
The DNIe function doesn’t operate in the DVI modes.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Digital Noise Reduction  
If the broadcast signal received by your TV is weak, you can activate the Digital Noise  
Reduction feature to help reduce any static and ghosting that may appear on the screen.  
1
Press the MENU button to  
display the menu, then  
press the ENTER button.  
2
Press M button to select  
"Digital NR."  
Pressing the œ or button will  
3
alternate between “On” and “Off”.  
Press the œ or button  
to select Digital NR “On”.  
Press the MENU button to  
exit.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Changing the Screen Size  
TXN3071WHF/TXN3098WHF/TXN3075WHF/TXN2670WHF  
Press the P.SIZE button to change the screen.  
• Wide:  
Sets the picture to 16:9 wide mode.  
• Panorama: Use this mode for the wide aspect ratio of a panoramic picture.  
• Zoom1:  
• Zoom2:  
Magnifies the size of the picture on screen.  
You can also move the picture on screen using the joystick up or down.  
Magnifies the size of the picture more than Zoom1.  
You can also move the picture on screen using the joystick up or down.  
• 4:3(Normal): Sets the picture to 4:3 normal mode.  
Notes: Screen size cannot be changed in the PIP mode. When the Aspect button is selected  
and then the appropriate OSD(On-Screen Display) is displayed, the Channel Up/Down but-  
tons don't operate for about three seconds.  
TXN3271HF/TXM2771HF/TXN3298HF/TXN2798HF/TXN3275HF/  
TXM2775HF/TXN2745FP/TXN3245FP/TXN3234HF  
Press the P.SIZE button to change the screen.  
• Normal:  
• Zoom1:  
Sets the picture to 4:3 normal mode.  
Magnifies the size of the picture on screen.  
You can also move the picture on screen using the joystick up or down.  
Magnifies the size of the picture more than Zoom1.  
You can also move the picture on screen using the joystick up or down.  
Sets the picture to 16:9 wide mode.  
• Zoom2:  
• Wide:  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Changing the Color Tone  
1
Press the MENU button to  
display the menu, then  
press the ENTER button.  
2
Press the M button to  
select “Color tone”.  
3
Press the œ or button  
to select ”Normal”,  
“Warm 1”, “Warm 2”,  
“Cool 2”or “Cool 1”  
according to personal  
preference.  
Press the MENU button to  
exit.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Using the R.Surf Feature  
This feature allows you to set the TV to return to a particular channel after a certain  
amount of time. For example, you may be watching a channel when commercials start.  
You can set the R.Surf to “5 minutes”, then switch channels. After minutes, the TV will  
return to the original channel. To use the R.Surf feature:  
1
While you are watching  
the channel to which you  
want to return, press  
R.SURF. The on-screen  
display will read “Surf  
off”.  
2
Press R.SURF again to set  
the timer in thirty second  
intervals, up to five min-  
utes.  
3
The time you set will begin counting down on the screen.  
When the time runs out, the TV will return to the channel  
you were watching when you set the timer.  
Freezing the Picture  
Note: The still function doesn’t  
operate in Component 1, 2 mode.  
1
Press the STILL button to freeze a moving picture.  
(normal sound will still be heard.)  
Press again to cancel.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Setting the On/Off Timer  
Before using the timer, you must  
set the TV’s clock. (See “Setting the  
Clock” on page 34).  
1
Press the MENU button to  
display the menu.  
When any of the timers are set, the  
“Timer” LED will illuminate (front  
panel of TV.)  
Press the M button to  
select "Time", then press  
the ENTER button.  
2
Press the M button to  
select "On time".  
Press the button to  
select the “On time” hours.  
(The hours digits will be  
highlighted.)  
Press the L or M button  
repeatedly to select the  
appropriate hours (i.e., the  
hour when the TV will turn  
on.)  
3
Press the button to  
select the “On time” min-  
utes.  
(The minutes digits will be  
highlighted.)  
Press the L or M button to  
select the appropriate min-  
utes.  
To deactivate the “On time,”  
select “Off” during this step.  
4
Press the button to  
select “On/Off.”  
Press the L or M button  
to turn the on-timer “On.”  
(Repeatedly pressing the  
L or M button will alter-  
nate between on and off.)  
5
When finished, press the  
MENU button.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Absent Power Off  
When you set the timer “On”, your  
television will eventually be turned  
off, if you do not operate any  
controls during the 3 hours after the  
TV is turned on by timer.  
6
To set the Off time, press  
the M button to select  
“Off time.”  
This function is available in only the  
timer “On” mode and will prevent a  
leakage accident or overheating,  
caused by your TV left on for a long  
time due to the timer “On” (when  
you are away on holiday, for  
example).  
Press the button and  
set the hours and minutes.  
(Follow the same proce-  
dure as in steps 1~5  
above.)  
7
When finished setting the timer, press the MENU button to exit.  
Setting the Sleep Timer  
The sleep timer automatically shuts off the TV after a preset time  
(from 10 to 180 minutes).  
After about 5 seconds, the sleep  
display will disappear from the  
screen, and the time interval will be  
set.  
1
Press the SLEEP button on the remote control.  
2
Press the SLEEP button repeatedly until the appropriate time  
interval appears (any of the preset values from “Off” to  
“180”).  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Choosing a Multi-Channel Sound (MTS)  
Soundtrack  
Depending on the particular program being broadcast, you can listen to Stereo, Mono, or  
a Separate Audio Program. (SAP audio is usually a foreign-language translation.  
Sometimes SAP has unrelated information like news or weather.)  
Quick way to access the MTS:  
Just press the “MTS” button on the  
remote control.  
1
Press the MENU button to  
display the menu.  
Note: The BBE function appears in  
TXN2798HF/ TXN3098WHF/  
TXN3298HF models.  
Press the M button once  
to select the “Sound”,  
then press the ENTER but-  
ton.  
2
Press the M button to  
select “MTS”.  
The text at the bottom of the  
menu tells you if the incoming  
audio is stereo, SAP, or mono.  
3
Press the œ or button  
repeatedly to select  
“Stereo”, “SAP”, or  
“Mono”.  
Press the MENU button to  
exit.  
Choose Stereo for channels that are broadcasting in stereo.  
Choose Mono for channels that are broadcasting in mono, or if you are  
having difficulty receiving a stereo signal.  
Choose SAP to listen to the Separate Audio Program, which is usually a  
foreign-language translation.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Extra sound settings (Turbo Sound,  
Surround, Auto Volume, Melody, BBE or  
Woofer)  
The following sound settings can be adjusted to suit your personal preferences.  
• Auto Volume  
Each broadcasting station has its own signal conditions, which can make it necessary  
to adjust the volume every time the channel is changed. “Auto volume” lets you  
automat-ically adjust the volume of the desired channel by lowering the sound output  
when the modulation signal is high or by raising the sound output when the modula-  
tion sig-nal is low.  
• BBE (TXN2798HF/TXN3298HF/TXN3098WHF)  
BBE is a built-in effect that adds clarity, punch and dynamics to the sound.  
1
Press the MENU button to  
display the menu.  
Press the M button to  
select the “Sound”, then  
press the ENTER button.  
2
Press the L or M button  
to select the required  
item, press the œ or √  
button to select “On”.  
Press the MENU button to  
exit.  
continued...  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
• Surround  
Your Samsung TV can create a "surround" effect such that the sound seems to come  
from all directions. Once the “Surround” is set to “On”, the setting applies to sound  
effects such as Standard, Music, Movie and Speech.  
• Turbo Sound  
(TXN2771HF/TXN3071WHF/TXN3271HF/TXN2670WHF/TXN2775HF/  
TXN3275HF/TXN3075WHF/TXN2745FP/TXN3245FP/TXN3234HF)  
Turbo sound emphasizes the bass and treble frequencies to add fullness to the sound.  
• Woofer (TXN2798HF/TXN3298HF/TXN3098WHF)  
Woofer sound emphasizes the bass frequencies to add fullness to the sound.  
1
Press the MENU button to  
display the menu.  
Press the M button to  
select the “Sound”, then  
press the ENTER button.  
2
Press the M button to  
select “Sound effect, then  
press the ENTER button.  
3
Press the L or M button  
to select the required  
item, then press the œ or  
button to select “On”.  
Press the MENU button to  
exit.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
• Melody  
You can hear clear a melody sound when the TV is powered on or Off.  
1
Press the MENU button to  
display the menu.  
Press the M button to  
select the “Setup”, then  
press the ENTER button.  
2
Press the M button to  
select “Melody” then  
press the œ or button  
to select “On”.  
Press the MENU button to  
exit.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Viewing Closed Captions  
Your TV decodes and displays the closed captions that are broadcast with certain TV shows.  
These captions are usually subtitles for the hearing impaired or foreign-language trans-  
lations. All VCRs record the closed caption signal from television programs, so home-record-  
ed video tapes also provide closed captions. Most pre-recorded commercial video tapes pro-  
vide closed captions as well. Check for the closed caption symbol in your television schedule  
and on the tapes packaging:  
.
1
Press the MENU button to  
display the menu.  
Press the M button to  
select the “Setup”, then  
press the button.  
2
Press the M button to  
select the “Caption”, then  
press the ENTER button.  
Misspellings and unusual  
characters sometimes occur during  
closed caption transmissions, especially  
those of live events. There may be a  
small delay before captions appear when  
you change channels. These are not  
malfunctions of the TV.  
3
Press the œ or button  
to turn closed captioning  
on/off.  
In caption mode, captions appear at  
the bottom of the screen, and they usual-  
ly cover only a small portion of the  
picture.  
4
Press the M button to  
select “Mode”, then press  
œ or to select  
“Caption” or “Text.”  
In text mode, information unrelated to  
the program, such as news or weather, is  
displayed. Text often covers a large  
portion of the screen.  
Different channels and fields  
display different information: Field 2  
carries additional information that  
supplements the information in Field 1.  
(For example, Channel 1 may have  
subtitles in English, while Channel 2 has  
subtitles in Spanish.)  
5
Depending on the particular broadcast, it might be necessary to  
make changes to “Channels” and “Field”:  
Use the L, M, œ and buttons to make the changes. (Follow  
the same procedure as in steps 3~4 above.)  
Press the MENU button to exit.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Viewing Picture-in-Picture  
(TXN2798HF/TXN3098WHF/TXN3298HF)  
You can use the PIP feature to simultaneously to watch two video sources.  
Note:The PIP feature does not work with DVD signals and S-Video mode.  
When PIP is selected in the Zoom mode, the Mode is automatically converted  
into the Normal mode.  
Activating Picture-in-Picture  
Quick way to access the PIP:  
Just press the PIP button on the  
remote control.  
1
Press the MENU button to  
display the menu, then  
press the ENTER button.  
2
Press the M button to  
select PIP, then press the  
ENTER button.  
If you turn TV off while watching  
3
and turn it on again, the PIP window  
will disappear.  
Press the button to  
select PIP “On.”  
Press the MENU button to  
exit.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Selecting a Signal Source (External A/V) for PIP  
1
Press the MENU button to  
display the menu, then  
press the ENTER button.  
2
Press the M button to  
select PIP, then press the  
ENTER button.  
Press the button to  
select PIP “On.”  
For more information about  
3
external A/V components and sig-  
nals, see “Viewing an External Signal  
Source” on page 41.  
Press the M to select the  
“TV/AV”, then press the √  
button repeatedly to cycle  
through all of the available  
signal sources:  
If you select “TV”, the PIP image is  
the same as the main image.  
“TV”, “AV1”, “AV2” and  
“AV3”.  
Press the MENU button to  
exit.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Changing the Size of the PIP Window  
Quick way to access the PIP size:  
Just press the SIZE button on the remote  
control.  
1
Press the MENU button to  
display the menu, then  
press the ENTER button.  
Press the SIZE button repeatedly to cycle  
through this sequence: double screen  
window, large window, small window and  
stock ticker window.  
2
Press the M button to  
select PIP, then press the  
ENTER button.  
Press the button to  
select PIP “On.”  
3
Press the M to select the  
“Size”, then press the √  
button repeatedly to  
select the “Double  
Screen”, “Large”, “Small”  
or “Stock ticker”.  
Press the MENU button to  
exit.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Swapping the Contents of the PIP image and Main image  
Quick way to access the SWAP:  
Just press the SWAP button on the  
remote control.  
1
Press the MENU button to  
display the menu, then  
press the ENTER button.  
2
Press the M button to  
select PIP, then press the  
ENTER button.  
Press the button to  
select PIP “On.”  
3
Press the M to select the  
“Swap”, then press the √  
button.  
The image in the PIP win-  
dow will appear on the  
main screen, and vice  
versa.  
Press the MENU button to  
exit.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Changing the PIP Channel  
Quick way to access the PIP channel:  
Just press the CH or CH button  
(blue color) on the remote control.  
1
Press the MENU button to  
display the menu, then  
press the ENTER button.  
2
Press the M button to  
select PIP, then press the  
ENTER button.  
Press the button to  
select PIP “On.”  
3
Press the M to select the  
“Channel”, then press the  
button.  
Press the L or M button  
to change the channel  
that appears in the PIP  
window.  
Press the MENU button to  
exit.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Using the V-Chip (USA)  
The V-Chip feature automatically locks out programming that is deemed inappropriate  
for children. The user must first enter a PIN (personal ID number) before any of the  
V-Chip restrictions can be set up or changed.  
Note : When the V-chip feature is active, channel-auto program features do not function.  
Setting Up Your Personal ID Number (PIN)  
1
Press the MENU button to  
display the menu.  
Press the M button to  
select the “Setup”, then  
press the ENTER button.  
2
Press the M button to  
select the “V-chip”, then  
press the ENTER button.  
The “Enter Pin” screen  
will appear. Enter your 4-  
digit PIN number,  
Note: The default PIN number for a new TV set is 0-0-0-0”.  
3
After entering a valid PIN  
number, the “V-chip”  
screen will appear.  
Press the M button and  
select “Change pin.”  
Note: If you forget the PIN,  
press the remote-control keys in the  
following sequence, which resets the  
pin to 0-0-0-0:  
4
While the “Change pin”  
field is selected, press the  
ENTER button.  
POWER OFF MUTE 8 2 ➜  
4 POWER ON.  
The Change pin screen  
will appear. Choose any  
4-digits for your PIN and  
enter them.  
As soon as the 4 digits are entered, the “Confirm new pin”  
screen appears. Re-enter the same 4 digits. When the Confirm  
screen disappears, your PIN has been memorized.  
Press the MENU button to exit.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
How to Enable/Disable the V-Chip  
1
Press the MENU button to  
display the menu.  
Press the M button to  
select the “Setup”, then  
press the ENTER button.  
2
Press the M button to  
select the “V-chip”, then  
press the ENTER button.  
The “Enter Pin” screen  
will appear. Enter your 4-  
digit PIN number,  
3
To enable the V-Chip  
feature, press the but-  
ton so that the “V-Chip  
lock” field is Yes.  
(Pressing the button  
will alternate between Yes  
and No.)  
How to Set up Restrictions Using the “TV guidelines”  
First, set up a personal identification number (PIN), and enable the V-Chip.  
(See previous section.) Parental restrictions can be set up using either of two methods:  
The TV guidelines or the MPAA rating.  
1
Press the MENU button to  
display the menu.  
Press the M button to  
select the “Setup”, then  
press the ENTER button.  
2
Press the M button to  
select the “V-chip”, then  
press the ENTER button.  
The “Enter Pin” screen  
will appear. Enter your 4-  
digit PIN number,  
continued...  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
3
Press the M button to  
select the “TV Guidelines”,  
then press the ENTER but-  
ton.  
Note: These categories consist of  
two separate groups: TV-Y and TV-Y7  
(young children through age 7), and  
TV-G through TV-MA (everybody  
else).  
4
The “TV guidelines”  
screen will appear.  
Press the L, M buttons to  
select one of the six age-  
based categories:  
The restrictions for these two groups  
work independently: If a household  
includes very young children as well  
as young adults, the TV guidelines  
must be set up separately for each age  
group. (See next step.)  
TV-Y  
Young children  
TV-Y7  
Children 7 and over  
--------------------------------------  
TV-G  
General audience  
TV-PG Parent Guidance  
TV-14  
Viewers 14 and over  
TV-MA Mature audience  
5
At this point, one of the TV-Ratings is selected.  
Press the ENTER button: Depending on your existing setup, a letter “U” or “B” will start blinking.  
(U= Unblocked, B= Blocked)  
While the “U” or ”B” is red, press the L or M button to block or unblock the category.  
Press the MENU button once to save the TV guidelines. A TV-Rating will be selected (BLUE), and no letters  
will blink. To exit this screen, press the MENU button again. To select a different TV-Rating, press the L or  
M button and then repeat the process.  
Note 1: The TV-Y7, TV-PG, TV-14 and TV-MA have additional options. See the next step to change  
any of the following sub-ratings:  
FV: Fantasy violence  
D: Dialog  
L: Adult language  
S: Sexual situation  
V: Violence  
Note 2: The V-Chip will automatically block certain categories that are “more restrictive.” For example, if  
you block “TV-Y” category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G catego-  
ry, then all the categories in the “young adult” group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The  
sub-ratings (D, L, S, V) work together similarly. (See next section.)  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
6
How to set the FV, D, L, S and V sub-ratings:  
First, select one of these TV-Ratings: TV-Y7, TV-PG, TV-14 or TV-MA (See Step 4, on previous page).  
Next, while the TV-Rating is selected , repeatedly press the button. This will cycle through the available  
sub-ratings (FV,L, S, D or V).  
A blinking letter (“U” or “B”) will be displayed for each sub-rating. While the “U” or “B” is blinking, press  
the L or M button to change the sub-rating.  
Press the MENU button once to save the TV guidelines. A TV-Rating will be selected (BLUE), and no letters  
will blink. To exit this screen, press the MENU button again. To select a different TV-Rating, press the L or  
M button and then repeat the process.  
Note: The V-chip will automatically block certain categories that are “More restrictive”. For example, if you  
block “L” sub-rating in TV-PG, then the “L” sub-ratings in TV-14 and TV-MA will automatically be blocked.  
7
Press the MENU button three times to clear all the screens. (Or proceed to the next section, and set up  
additional restrictions based on the MPAA codes).  
How to Set up Restrictions using the MPAA Ratings: G, PG, PG-  
13, R, NC-17, X  
The MPAA rating system uses the Motion Picture Association of America (MPAA) system,  
and its main application is for movies. (Eventually, movie videocassettes will be encoded  
with MPAA ratings.) When the V-Chip lock is on, the TV will automatically block any  
programs that are coded with objectionable ratings (either MPAA or TV-Ratings).  
1
Press the MENU button to  
display the menu.  
Press the M button to  
select the “Setup”, then  
press the ENTER button.  
2
Press the M button to  
select the “V-chip”, then  
press the ENTER button.  
The “Enter Pin” screen  
will appear. Enter your  
4-digit PIN number,  
continued...  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
3
The “V-chip” screen will  
appear.  
Press the M button to  
select “MPAA rating”,  
then press the ENTER but-  
ton.  
Note: The V-Chip will automati-  
cally block any category that is “more  
restrictive.” For example, if you block  
the “PG-13” category, then “R,” “NC-  
17,” and “X” will automatically be  
blocked also.  
4
The “MPAA rating” screen  
will appear.  
Repeatedly press the M  
button to select a  
particular MPAA category.  
Pressing the M button will  
cycle through the MPAA  
categories:  
G
General audience (no restrictions).  
PG Parental guidance suggested.  
PG-13PG-13 (Parents strongly cautioned).  
R
R (Restricted. Children under 17 should  
be accompanied by an adult).  
NC-17 No children under age 17.  
X (Adults only).  
X
NR Not rated.  
While a particular category is selected, press ENTER to activate  
it.  
A letter (“U” or “B”) will be displayed. Press the L or M button  
to select “U” or”B”.  
Press the MENU button to save the settings and to clear all  
screens.  
How to Reset the TV after the V-Chip  
Blocks a Channel (“Emergency Escape”)  
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following  
message will appear: “Excessive rating.”  
To resume normal viewing, tune to a different channel using the number buttons. Under certain conditions  
(depending on the rating of the local TV programs) the V-Chip might lock out all the channels. In this case,  
use the V-Chip function for an “emergency escape”:  
Press the MENU button to display the menu. Press the M button to select the “Setup” menu and press the  
ENTER button.  
Press the M button to select the “V-chip” menu and press the ENTER button. Enter your PIN number, and  
press the button to temporarily disable the V-Chip Lock.  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Using the V-Chip (Canada)  
The V-Chip feature automatically locks out programming that is deemed inappropriate  
for children. The user must first enter a PIN (personal ID number) before any of the  
V-Chip restrictions can be set up or changed.  
Note : When the V-chip feature is active, channel-auto program features do not function.  
Setting Up Your Personal ID Number (PIN)  
1
Press the MENU button to  
display the menu.  
Press the M button to  
select the “Setup”, then  
press the ENTER button.  
2
Press the M button to  
select the “V-chip”, then  
press the ENTER button.  
The “Enter Pin” screen  
will appear. Enter your 4-  
digit PIN number,  
Note: The default PIN number for a new TV set is 0-0-0-0”.  
3
After entering a valid PIN  
number, the “V-chip”  
screen will appear.  
Press the M button and  
select “Change pin.”  
Note: If you forget the PIN,  
press the remote-control keys in the  
following sequence, which resets the  
pin to 0-0-0-0:  
4
While the “Change pin”  
field is selected, press the  
ENTER button.  
POWER OFF MUTE 8 2 ➜  
4 POWER ON.  
The Change pin screen  
will appear. Choose any  
4-digits for your PIN and  
enter them.  
As soon as the 4 digits are entered, the “Confirm new pin”  
screen appears. Re-enter the same 4 digits. When the Confirm  
screen disappears, your PIN has been memorized.  
Press the MENU button to exit.  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
How to Enable/Disable the V-Chip  
1
Press the MENU button to  
display the menu.  
Press the M button to  
select the “Setup”, then  
press the ENTER button.  
2
Press the M button to  
select the “V-chip”, then  
press the ENTER button.  
The “Enter Pin” screen  
will appear. Enter your 4-  
digit PIN number,  
3
To enable the V-Chip  
feature, press the but-  
ton so that the “V-Chip  
lock” field is Yes.  
(Pressing the button  
will alternate between Yes  
and No.)  
How to Set up Restrictions Using the “TV guidelines”  
First, set up a personal identification number (PIN), and enable the V-Chip.  
(See previous section.) Parental restrictions can be set up using either of two methods:  
The TV guidelines or the MPAA rating.  
1
Press the MENU button to  
display the menu.  
Press the M button to  
select the “Setup”, then  
press the ENTER button.  
2
Press the M button to  
select the “V-chip”, then  
press the ENTER button.  
The “Enter Pin” screen  
will appear. Enter your 4-  
digit PIN number,  
continued...  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
3
Press the M button to  
select the “TV Guidelines”,  
then press the ENTER but-  
ton.  
Note: These categories consist of  
two separate groups: TV-Y and TV-Y7  
(young children through age 7), and  
TV-G through TV-MA (everybody  
else).  
4
The “TV guidelines”  
screen will appear.  
Press the L, M buttons to  
select one of the six age-  
based categories:  
The restrictions for these two groups  
work independently: If a household  
includes very young children as well  
as young adults, the TV guidelines  
must be set up separately for each age  
group. (See next step.)  
TV-Y  
Young children  
TV-Y7  
Children 7 and over  
--------------------------------------  
TV-G  
General audience  
TV-PG Parent Guidance  
TV-14  
Viewers 14 and over  
TV-MA Mature audience  
5
At this point, one of the TV-Ratings is selected.  
Press the ENTER button: Depending on your existing setup, a letter “U” or “B” will start blinking.  
(U= Unblocked, B= Blocked)  
While the “U” or ”B” is red, press the L or M button to block or unblock the category.  
Press the MENU button once to save the TV guidelines. A TV-Rating will be selected (BLUE), and no letters  
will blink. To exit this screen, press the MENU button again. To select a different TV-Rating, press the L or  
M button and then repeat the process.  
Note 1: The TV-Y7, TV-PG, TV-14 and TV-MA have additional options. See the next step to change  
any of the following sub-ratings:  
FV: Fantasy violence  
D: Dialog  
L: Adult language  
S: Sexual situation  
V: Violence  
Note 2: The V-Chip will automatically block certain categories that are “more restrictive.” For example, if  
you block “TV-Y” category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G catego-  
ry, then all the categories in the “young adult” group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The  
sub-ratings (D, L, S, V) work together similarly. (See next section.)  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
6
How to set the FV, D, L, S and V sub-ratings:  
First, select one of these TV-Ratings: TV-Y7, TV-PG, TV-14 or TV-MA (See Step 4, on previous page).  
Next, while the TV-Rating is selected , repeatedly press the button. This will cycle through the available  
sub-ratings (FV,L, S, D or V).  
A blinking letter (“U” or “B”) will be displayed for each sub-rating. While the “U” or “B” is blinking, press  
the L or M button to change the sub-rating.  
Press the MENU button once to save the TV guidelines. A TV-Rating will be selected (BLUE), and no letters  
will blink. To exit this screen, press the MENU button again. To select a different TV-Rating, press the L or  
M button and then repeat the process.  
Note: The V-chip will automatically block certain categories that are “More restrictive”. For example, if you  
block “L” sub-rating in TV-PG, then the “L” sub-ratings in TV-14 and TV-MA will automatically be blocked.  
7
Press the MENU button three times to clear all the screens. (Or proceed to the next section, and set up  
additional restrictions based on the MPAA codes).  
How to Set up Restrictions using the MPAA Ratings: G, PG, PG-  
13, R, NC-17, X  
The MPAA rating system uses the Motion Picture Association of America (MPAA) system,  
and its main application is for movies. (Eventually, movie videocassettes will be encoded  
with MPAA ratings.) When the V-Chip lock is on, the TV will automatically block any  
programs that are coded with objectionable ratings (either MPAA or TV-Ratings).  
1
Press the MENU button to  
display the menu.  
Press the M button to  
select the “Setup”, then  
press the ENTER button.  
2
Press the M button to  
select the “V-chip”, then  
press the ENTER button.  
The “Enter Pin” screen  
will appear. Enter your  
4-digit PIN number,  
continued...  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
3
The “V-chip” screen will  
appear.  
Press the M button to  
select “MPAA rating”,  
then press the ENTER but-  
ton.  
Note: The V-Chip will automati-  
cally block any category that is “more  
restrictive.” For example, if you block  
the “PG-13” category, then “R,” “NC-  
17,” and “X” will automatically be  
blocked also.  
4
The “MPAA rating” screen  
will appear.  
Repeatedly press the M  
button to select a  
particular MPAA category.  
Pressing the M button will  
cycle through the MPAA  
categories:  
G
General audience (no restrictions).  
PG Parental guidance suggested.  
PG-13PG-13 (Parents strongly cautioned).  
R
R (Restricted. Children under 17 should  
be accompanied by an adult).  
NC-17 No children under age 17.  
X (Adults only).  
X
NR Not rated.  
While a particular category is selected, press ENTER to activate  
it.  
A letter (“U” or “B”) will be displayed. Press the L or M button  
to select “U” or”B”.  
Press the MENU button to save the settings and to clear all  
screens.  
How to Set up Restrictions Using the  
Canadian English  
1
Press the MENU button to  
display the menu.  
Press the M button to  
select the “Setup”, then  
press the ENTER button.  
2
Press the M button to  
select the “V-chip”, then  
press the ENTER button.  
The “Enter Pin” screen will  
appear. Enter your 4-digit  
PIN number,  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
3
The “V-chip” screen will  
appear.  
Press the M button to  
select “Canadian English”,  
then press the ENTER but-  
ton.  
4
The “Canadian English” screen will appear.  
Repeatedly press the M button to select a particular  
Canadian English category.  
Pressing the M button will cycle through the Canadian  
English categories:  
E
Exempt programming includes...news, sports,  
documentaries and other information programming,  
talk shows, music videos, and variety programming.  
C
Programming intended for children under age 8.  
C8+ Programming generally considered acceptable for  
children 8 years and over to watch on their own.  
G
General programming, suitable for all audiences.  
PG Parental Guidance.  
14+ Programming contains themes or content which  
may not be suitable for viewers under the age of 14.  
18+ Adult programming.  
While a particular category is selected, press ENTER to activate it.  
A letter (“U” or “B”) will be displayed. Press the L or M button to select “U” or”B”.  
Press the MENU button to save the settings and to clear all screens.  
How to Set up Restrictions Using the  
Canadian French  
1
Press the MENU button to  
display the menu.  
Press the M button to  
select the “Setup”, then  
press the ENTER button.  
2
Press the M button to  
select the “V-chip”, then  
press the ENTER button.  
The “Enter Pin” screen will  
appear. Enter your 4-digit  
PIN number,  
continued...  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
3
The “V-chip” screen will  
appear.  
Press the M button to  
select “Canadian French”,  
then press the ENTER but-  
ton.  
4
The “Canadian French” screen will appear.  
Repeatedly press the M button to select a particular  
Canadian French category.  
Pressing the M button will cycle through the Canadian  
French categories:  
E
Exempt programming includes...news, sports,  
documentaries and other information programming,  
talk shows, music videos, and variety programming.  
G
General.  
8 ans+ 8+ General-Not recommended for young children.  
13 ans+ Programming may not be suitable for children under  
the age of 13.  
16 ans+ Programming is not suitable for children under the  
age of 16.  
18 ans+ Programming restricted to adults.  
While a particular category is selected, press ENTER to activate it.  
A letter (“U” or “B”) will be displayed. Press the L or M button to select “U” or”B”.  
Press the MENU button to save the settings and to clear all screens.  
How to Reset the TV after the V-Chip  
Blocks a Channel (“Emergency Escape”)  
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following  
message will appear: “Excessive rating.”  
To resume normal viewing, tune to a different channel using the number buttons. Under certain conditions  
(depending on the rating of the local TV programs) the V-Chip might lock out all the channels. In this case,  
use the V-Chip function for an “emergency escape”:  
Press the MENU button to display the menu. Press the M button to select the “Setup” menu and press the  
ENTER button.  
Press the M button to select the “V-chip” menu and press the ENTER button. Enter your PIN number, and  
press the button to temporarily disable the V-Chip Lock.  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Viewing the Demonstration  
(TXN2798HF/TXN3098WHF/TXN3298HF)  
To become familiar with the various menus provided by your television, you can view  
the in built demonstration.  
1
Press the MENU button to  
display the menu.  
Press the M button to  
select the “Setup”, then  
press the ENTER button.  
2
Press the M button to  
select “Demonstration”,  
then press the ENTER but-  
ton.  
3
Each of the menu options  
is displayed in turn.  
When you wish to stop  
the demonstration, press  
any button on the remote  
control.  
Press the MENU button to  
exit.  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter Five  
TROUBLESHOOTING  
If the TV seems to have a problem, first try this list of possible problems and solutions.  
If none of these troubleshooting tips apply, then call your nearest service center.  
Identifying Problems  
Problem  
Possible Solution  
Poor picture  
Try another channel.  
Adjust the antenna.  
Check all wire connections.  
Poor sound quality.  
No picture or sound.  
Try another channel.  
Adjust the antenna.  
Try another channel.  
Press the TV/VIDEO button.  
Make sure the TV is plugged in.  
Check the antenna connections.  
No color, wrong colors or tints.  
Make sure the program is broadcast in color.  
Adjust the picture settings.  
If the set is moved or turned in a different  
direction, the power should be OFF for at least  
30 minutes.  
Picture rolls vertically.  
The TV operates erratically  
The TV won’t turn on.  
Adjust the antenna.  
Check all wire connections.  
Unplug the TV for 30 seconds, then try  
operating it again.  
Make sure the wall outlet is working.  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
Cleaning and Maintaining Your TV  
With proper care, your TV unit will give you many years of service. Please follow these  
guidelines to get the maximum performance from your TV.  
Placement  
Do not place the TV near extremely hot, cold, humid or dusty places.  
Do not place the TV near appliances with electric motors that create magnetic fields,  
such as vacuum cleaners.  
Keep the ventilation openings clear; do not place the TV on a soft surface, such as  
cloth or paper.  
Place the TV in a vertical position only.  
Liquids  
Do not handle liquids near or on the TV. Liquids that spill into it can cause serious  
damage.  
Cabinet  
Never open the cabinet or touch the parts inside.  
Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or  
chemicals.  
Do not put heavy objects on top of the cabinet.  
Temperature  
If your TV is suddenly moved from a cold to a warm place, unplug the power cord,  
and allow at least two hours for moisture that may have formed inside the unit to dry  
completely.  
Using Your TV in Another Country  
If you plan to take your TV with you to a foreign country, please be aware of the different  
television systems that are in use around the world. A TV designed for one system may  
not work properly with another system due to differences in the TV channel frequencies  
Specifications  
TXN3071WHF / TXN3075WHF  
TXN3098WHF  
TXN3271HF / TXN3275HF  
TXN3298HF/TXN3234HF  
TXN3245FP  
TXN2771HF / TXN2775HF  
TXN2798HF/TXN2670WHF  
TXN2745FP  
Model  
AC 120 V  
60Hz  
190 W  
AC 120 V  
60Hz  
190 W  
AC 120 V  
60Hz  
Voltage  
Frequency of Operation  
Power Consumption  
Dimensions  
190 W (TXN2670WHF: 200 W)  
742 x 561 x 581 / 29.21 x 22.08 x 22.87  
762 x 519 x 600 / 30.00 x 20.43 x 23.62  
704 x 542 x 619 / 27.72 x 21.34 x 24.37  
800 x 553 x 505 / 31.50 x 21.77 x 19.88  
742 x 561 x 581 / 29.21 x 22.08 x 22.87  
45.5 / 100.31  
880 x 600 x 555 / 34.65 x 23.62 x 21.85 880 x 585 x 690 / 34.65 x 23.03 x 27.16  
898 x 559 x 587 / 35.35 x 22.01 x 23.11 911x 579 x 703 / 35.87 x 22.80 x 27.68  
830 x 557 x 619 / 32.68 x 21.93 x 24.37 836 x 582 x 719 / 32.91 x 22.91 x 28.31  
940 x 959 x 685 / 37.01 x 37.76 x 26.97  
(mm/inches)  
880 x 585 x 690 / 34.65 x 23.03 x 27.16  
55.5 / 122.36  
56.0 / 123.46  
57.8 / 127.43  
67.5 / 148.81  
67 / 147.71  
68.8 / 151.68  
66.0 / 145.51  
67.5 / 148.81  
Weight  
(Kg/ lbs)  
47.5 / 104.72  
46.5 / 102.52  
40.4 / 89.07  
45.5 / 100.31  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Quatech Stereo Receiver 24GHz User Guide
Raypak Swimming Pool Heater 652B User Guide
RIDGID Nail Gun R350RHA User Guide
Rikaline GPS Receiver GPS 6030 User Guide
Saitek Video Game Controller CCB4330200B2041 User Guide
Salton CD Player WT51BL User Guide
Samsung Baby Monitor SNH E6411BN User Guide
Samsung Security Camera SCC B9270 User Guide
Sanyo Air Conditioner CH3082 User Guide
Sears Water Heater 153326362 User Guide