Samsung CRT Television TX T2781, TX T2782, TX T2082 User Guide

TX-T2781  
TX-T2782  
TX-T2082  
COLOR TELEVISION  
Owner’s  
Instructions  
Record your Model and Serial number here for future reference.  
▪ Model _______________ ▪ Serial No. _______________  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Accessories  
Please make sure the following items are included with your TV.  
If any items are missing, contact your dealer.  
Remote Control (AA59-00405B)/  
AAA Batteries  
Owner’s Instructions/  
Safety Guide Manual  
Warranty Cards/  
Registration Card  
Viewing the Control Panel  
You can control your TV’s basic features, including the on-screen menu.  
To use the more advanced features, you must use the remote control.  
TX-T2781  
TX-T2782  
TX-T2082  
The product color and shape may vary depending on the model.  
1
SOURCE  
4
5
CH  
Toggles between all the available input sources (TV, AV1,  
AV2, Component).  
In the on-screen menu, use this button as you would use the  
ENTER button on the remote control.  
Press to change channels.  
In the on-screen menu, use the  
would use the ▲ and ▼ buttons on the remote control.  
CH  
buttons as you  
Power Indicator  
2
3
MENU  
Lights up when you turn the power off.  
Press to see an on-screen menu of your TV’s features.  
-
-
Power Off: Red  
Power On: Off  
+ VOL −  
Press to increase or decrease the volume.  
In the on-screen menu, use the + VOL – buttons as you would  
use the ◄ and ► buttons on the remote control.  
6
7
Remote Control Sensor  
Aim the remote control towards this spot on the TV.  
POWER  
Press to turn the TV on and off.  
English - 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing the Connection Panel  
Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players.  
Rear of the TV  
Side of the TV  
TX-T2781/TX-T2782  
TX-T2082  
The product color and shape may vary depending on the model.  
1
2
3
ANT IN (AIR/CABLE)  
Connect to an antenna(air) or cable TV system.  
5
6
Headphone  
Connect a set of external headphones to this jack for private  
listening.  
AV OUT  
Connect to the audio/video input jacks of a recording VCR.  
UPGRADE PORT (USB)  
Connect for service and software upgrade.  
AV IN 1 / AV IN 2  
Video and audio inputs for external devices, such as a  
camcorder or VCR.  
4
COMPONENT IN  
Connect Component video/audio.  
English - 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
You can use the remote control up to a distance of about 23 feet from the TV. When using the remote control, always point it  
directly at the TV.  
This is a special remote control for the visually impaired, and has Braille points on the POWER, Channel, and Volume buttons.  
The performance of the remote control may be affected by bright light.  
1
2
3
POWER  
Turns the TV on and off.  
@
#
$
SOURCE  
Press to display all of the available  
video sources.  
NUMERIC BUTTONS  
Press to directly select a channel.  
INFO  
Press to display information on the  
TV screen.  
Press to select additional channels  
being broadcast by the same station.  
For example, to select channel “54-  
3”, press “54”, then press “–” and “3”.  
TV/DTV  
Press to switch between TV (Analog)  
and DTV (Digital) mode.  
4
VOL +, VOL –  
Press to increase or decrease the  
volume.  
%
^
&
*
(
CH  
, CH  
Press to change channels.  
EXIT  
5
6
MENU  
Press to exit from the menu.  
Displays the main on-screen menu.  
MUTE  
UP▲/DOWN▼/LEFT◄/RIGHT►/  
ENTER  
Use to select on-screen menu items  
and change menu values.  
Press to temporarily cut off the sound.  
P.SIZE  
Press to change the screen size.  
SLEEP  
7
8
9
S.MODE  
Press to select the sound mode.  
Press to select a preset time interval  
for automatic shut off.  
P.MODE  
Press to select the picture mode.  
)
MTS  
Press to choose stereo, mono  
or Separate Audio Program(SAP  
broadcast).  
AUTO PROG.  
Press to automatically store selected  
Air/Cable channels.  
a
b
CAPTION  
Controls the caption decoder.  
0
!
ADD/DEL  
Use to store and delete channels  
to/from memory.  
R.SURF  
Press to automatically return to a  
preferred channel after a user-preset  
time delay.  
PRE-CH  
Tunes to the previous channel.  
c
TURBO  
Press to select Turbo sound.  
Installing Batteries in the Remote Control  
1
2
Lift the cover at the back of the remote control upward as shown in the figure.  
Install two AAA size batteries.  
Make sure to match the + and ends of the batteries with the diagram inside the  
compartment.  
Do not mix battery types, i.e. alkaline and manganese.  
3
Replace the cover.  
Remove the batteries and store them in a cool and dry place if you won’t be using the  
remote control for a long time. The remote control can be used up to about 23 feet from  
the TV. (Assuming typical TV usage, the batteries last for about one year.)  
English - 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting VHF and UHF Antennas  
Antennas with 300 Ω Flat Twin Leads  
If you are using an off-air antenna(such as a roof antenna or “rabbit ears”) that has 300 Ω twin flat leads, follow the directions  
below.  
1
Place the wires from the twin leads under the screws on a 300-75 Ω adapter(not supplied).  
Use a screwdriver to tighten the screws.  
1
2
2
Plug the adaptor into the ANT IN (AIR/CABLE) terminal on the back of the TV.  
Antennas with 75 Ω Round Leads  
Plug the antenna lead into the ANT IN (AIR/CABLE) terminal on the back of the TV.  
1
1
Separate VHF and UHF Antennas  
If you have two separate antennas for your TV(one VHF and one UHF), you must combine the two antenna signals before  
connecting the antennas to the TV. This procedure requires an optional combiner-adaptor(available at most electronics  
shops).  
1
Connect both antenna leads to the combiner.  
1
2
Plug the combiner into the ANT IN (AIR/CABLE) terminal on the back of the TV.  
2
Connecting Cable TV  
Cable without a Cable Box  
1
Plug the incoming cable into the ANT IN (AIR/CABLE) terminal on the back of the TV.  
Because this TV is cable-ready, you do not need a cable box to view unscrambled cable  
1
channels.  
Connecting to a Cable Box that Descrambles All Channels  
1
Find the cable that is connected to the ANT OUT terminal on your cable box.  
This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.  
ANT IN  
ANT OUT  
2
Connect the other end of this cable to the ANT IN (AIR/CABLE) terminal on the back of the TV.  
1
2
Connecting to a Cable Box that Descrambles Some Channels  
If your cable box descrambles only some channels(such as premium channels), follow the instructions below. You will need a  
two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics stores.)  
5
1
2
6
Incoming  
cable  
4
3
TV Rear  
Splitter  
RF (A/B)  
Switch  
Cable Box  
Cable Box  
1
Find and disconnect the cable that is connected to the  
ANT IN terminal on your cable box.  
5
6
Connect another cable between the other OUT terminal on  
the splitter and the A-IN terminal on the RF (A/B) switch.  
This terminal might be labeled “ANT IN”, “VHF IN” or  
simply, “IN”.  
Connect the last Antenna cable between the OUT terminal  
on the RF (A/B) switch and the ANT IN (AIR/CABLE)  
terminal on the back of the TV.  
2
3
Connect this cable to a two-way splitter.  
Connect an Antenna cable between an OUT terminal on  
the splitter and the IN terminal on the cable box.  
After you have made this connection, set the A/B switch to the  
“A” position for normal viewing. Set the A/B switch to the “B”  
position to view scrambled channels. (When you set the A/B  
switch to “B”, you will need to tune your TV to the cable box’s  
output channel, which is usually channel 3 or 4.)  
4
Connect an Antenna cable between the ANT OUT terminal  
on the cable box and the B-IN terminal on the RF(A/B)  
switch.  
English - 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting a VCR  
Video Connection  
These instructions assume that you have already connected your TV to an antenna or a cable TV system(according to the  
instructions on page 6). Skip step 1 if you have not yet connected to an antenna or a cable system.  
Each VCR has a different back panel configuration.  
When connecting a VCR, match the color of the connection terminal to the cable.  
1
2
Unplug the cable or antenna from the back of the TV.  
Rear of the TV  
Connect the cable or antenna to the ANT IN terminal on  
the back of the VCR.  
VCR  
3
Connect an Antenna cable between the ANT OUT terminal  
on the VCR and the ANT IN (AIR/CABLE) terminal on the  
TV.  
4
5
Connect a Video Cable between the VIDEO OUT jack on  
the VCR and the AV IN 1 [VIDEO] jack on the TV.  
Connect Audio Cables between the AUDIO OUT jacks on  
the VCR and the AV IN 1 [L-AUDIO-R] jacks on the TV.  
Audio Cable  
5
If you have a “mono” (non-stereo) VCR, use a  
(Not supplied)  
2
Y-connector(not supplied) to hook up to the right and  
left audio input jacks of the TV. If your VCR is stereo,  
you must connect two cables.  
4
3
Video Cable(Not supplied)  
Antenna cable(Not supplied)  
Also, you can connect to AV IN 2 on the side panel of TV.  
Connecting a Camcorder  
The side panel jacks on your TV make it easy to connect a camcorder to your TV.  
They allow you to view the camcorder tapes without using a VCR.  
Each Camcorder has a different back panel configuration.  
When connecting a Camcorder, match the color of the connection terminal to the cable.  
1
2
Connect a Video Cable between the AV IN 2 [VIDEO] jack  
on the TV and the VIDEO OUT jack on the camcorder.  
Side of the TV  
Connect Audio Cables between the AV IN 2  
[L-AUDIO-R] jacks on the TV and the AUDIO OUT jacks  
on the camcorder.  
1
2
Video Cable(Not supplied)  
Camcorder  
Audio Cable(Not supplied)  
English - 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting a DVD Player/Set-Top Box  
The rear panel jacks on your TV make it easy to connect a DVD player/Set-Top Box.  
Each DVD Player/Set-Top Box has a different back panel configuration.  
When connecting a DVD Player/Set-Top Box, match the color of the connection terminal to the cable.  
1
Connect Component Cables between the COMPONENT  
IN [Y, PB, PR] jacks on the TV and the COMPONENT OUT  
[Y, PB, PR] jacks on the DVD Player/Set-Top Box.  
Rear of the TV  
DVD Player/Set-Top Box  
2
Connect Audio Cables between the COMPONENT IN  
[L-AUDIO-R] jacks on the TV and the AUDIO OUT jacks  
on the DVD Player/Set-Top Box.  
Component video separates the video into Y(Luminance  
(brightness)), PB(Blue), and PR(Red) for enhanced video  
quality. Be sure to match the component video and audio  
connections.  
For example, if connecting the video cable to  
COMPONENT IN, connect the audio cable to  
COMPONENT IN also.  
Audio Cable  
(Not supplied)  
2
1
Component Cable(Not supplied)  
This product is an SD-grade DTV and must be connected  
in the resolution of 480i.  
If this product is connected in the resolution of 480p, 720p  
or 1080i, the screen may be displayed abnormally or may  
not be displayed at all.  
Connecting an Amplifier/DVD Home Theater - Analog  
Each Amplifier/DVD Home Theater has a different back panel configuration.  
When connecting an Amplifier/DVD Home Theater, match the color of the connection terminal to the cable.  
1
Connect Audio Cables between the AV OUT  
[L-AUDIO-R] on the TV and AUDIO IN on the Amplifier/  
DVD Home Theater.  
Rear of the TV  
Amplifier/  
DVD Home Theater  
When an audio amplifier is connected to the AUDIO OUT  
[L-AUDIO-R] terminals: Decrease the volume of the TV,  
and adjust the volume level with the Amplifier’s volume  
control.  
1
Audio Cable(Not supplied)  
English - 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Plug & Play Feature  
When the TV is initially powered on, basic settings proceed automatically and  
subsequently:  
Plug & Play  
Start Plug & Play  
1
Press the POWER button on the remote control.  
The message Start Plug & Play is displayed.  
Press the ENTER button, then the Language menu is displayed.  
OK  
Enter  
Exit  
2
3
Press the ▲ or ▼ button to select the desired language, then press the ENTER button.  
The message Select Home Mode when installing this TV at home. is displayed.  
Plug & Play  
Language  
English  
Español  
Français  
Press the ◄ or ► button to select Shop or Home, then press the ENTER button.  
The Check antenna input. menu is displayed.  
The default selection is Home.  
We recommend setting the TV to Home mode for the best picture in your home  
environment.  
Move  
Enter  
Skip  
Shop mode is only intended for use in retail environments.  
If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home)  
mode, press the Volune button and then hold down the MENU button for five seconds  
on the TV panel.  
Plug & Play  
Select Home Mode  
when installing this TV  
at home.  
4
5
6
Make sure that an antenna is connected to the TV.  
Press the ENTER button, then the Antenna menu is displayed.  
Shop  
Home  
Move  
Enter  
Skip  
Press the ▲ or ▼ button to select the desired connection.  
Press the ENTER button to memorize the channels of the selected connection.  
Plug & Play  
Press the ENTER button to start.  
First analog, then digital channels will be memorized.  
Auto Program  
Air  
Cable  
Air+Cable  
When selecting Cable TV:  
7
8
9
Press the ▲ or ▼ button to select Cable, then press the ENTER button.  
The Cable System menu is displayed.  
Move  
Enter  
Skip  
Press the ▲/▼/◄/► buttons to select the cable system for analog and digital channels  
respectively, then press the ENTER button.  
Plug & Play  
Auto Program  
Cable System  
Analog  
Start  
Press the ENTER button to start. The TV begins memorizing all available channels.  
Press the ENTER button to stop.  
After all available channels are stored, the Clock Set menu is displayed.  
STD  
HRC  
HRC  
IRC  
Digital  
STD  
IRC  
When you select Cable or Air+Cable, it also executes “Clearing Scrambled Channels”  
simultaneously. See page 15.  
Move  
Enter  
Skip  
10 Press the ◄ or ► button to move to the hour or minute.  
Set the clock by pressing the ▲ or ▼ button, then press the ENTER button.  
Plug & Play  
Auto Program in progress  
STD 120  
11 The message Enjoy your watching. is displayed.  
3%  
When you have finished, press the ENTER button.  
Even if the ENTER button is not pressed, the message will automatically disappear after  
several seconds.  
Stop  
Enter  
Skip  
If you want to reset this feature...  
Scrambled Channels Searched  
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Setup, then press the ENTER button.  
Press the ENTER button to select Plug & Play.  
Plug & Play  
2
For further details on setting up options, refer to the top of this page.  
Clock Set  
-- : -- am  
The Plug & Play feature is only available in TV and DTV mode.  
Move  
Enter  
Skip  
Enjoy your watching.  
OK  
English - 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memorizing the Channels  
Your TV can memorize and store all of the available channels for both air and cable  
Channel  
channels. After the available channels are memorized, use the CH  
and CH  
button  
Antenna  
Auto Program  
Clear Scrambled Channel  
Add/Delete  
Fine Tune  
:
Air  
Cable  
to scan through the channels. This eliminates the need to change channels by entering  
the channel digits. There are three steps for memorizing channels: selecting a broadcast  
source, memorizing the channels(automatic) and adding or deleting channels(manual).  
Name  
Signal Strength  
Selecting the Video Signal-source  
Before your television can begin memorizing the available channels, you must specify the  
type of signal source that is connected to the TV(i.e. an air or a cable system).  
Move  
Enter  
Return  
Channel  
Antenna  
Auto Program  
Clear Scrambled Channel  
Add/Delete  
Fine Tune  
Name  
Signal Strength  
: Air  
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Channel, then press the ENTER button.  
2
Press the ENTER button select Antenna.  
Press the ▲ or ▼ button to select Air or Cable, then press the ENTER button.  
Storing Channels in Memory (Automatic Method)  
Move  
Enter  
Return  
3
4
5
Press the ▲ or ▼ button to select Auto Program, then press the ENTER button.  
Auto Program  
Press the ▲ or ▼ button to select the antenna connection, then press the ENTER button.  
Air  
Cable  
Air+Cable  
Press the ENTER button to start.  
First analog, then digital channels will be memorized.  
When selecting Cable TV:  
Move  
Enter  
Return  
7
Press the ▲ or ▼ button to select Cable, then press the ENTER button.  
The Cable System menu is displayed.  
Auto Program  
8
Press the ▲/▼/◄/► buttons to select the cable system for analog and digital channels  
respectively, then press the ENTER button.  
Cable System  
Analog  
Start  
STD, HRC, and IRC identify various types of cable TV systems. Contact your local cable  
company to identify the type of cable system that exists in your particular area.  
At this point the signal source has been selected.  
STD  
Digital  
HRC  
HRC  
IRC  
STD  
IRC  
Move  
Enter  
Return  
9
Press the ENTER button to start.  
The TV begins memorizing all available channels.  
Press the ENTER button to stop.  
Auto Program  
Auto Program in progress  
STD 120  
When you select Cable or Air+Cable it also executes “Clearing Scrambled Channels”  
simultaneously. See page 15.  
3%  
This TV can receive Digital HD (High Definition) signals, but converts them to SD (Standard  
Definition) for viewing.  
Stop  
Return  
Enter  
You can also press the AUTO PROG. button on the remote control to bring up the Auto  
Scrambled Channels Searched  
Program menu.  
English - 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To Select the Source  
Use to select TV or other external input sources such as DVD players, VCRs, etc. connected  
to the TV.  
Source List  
TV  
DTV  
AV1  
AV2  
1
Press the MENU button to display the menu.  
Press the ENTER button to select Input.  
- - - -  
- - - -  
- - - -  
Component  
2
Press the ENTER button to select Source List.  
Press the ▲ or ▼ button to select signal source, then press the ENTER button.  
You can choose between the following sets of jacks: TV, AV1, or Component on the  
TV’s rear panel and AV2 on the TV’s side panel.  
Move  
Enter  
Return  
Press the SOURCE button on the remote control to view an external signal source.  
In TV(Analog) mode: TV AV1 AV2 Component  
In DTV(Digital) mode: DTV AV1 AV2 Component  
To check the input signals displayed, press the INFO button on the remote control.  
To Edit the Input Source Name  
Name the external device connected to the input jacks to make your input source selection  
easier.  
Edit Name  
AV1  
AV2  
Component  
: -
----  
: -
VCR  
: -
DVD  
1
Press the MENU button to display the menu.  
Press the ENTER button to select Input. Press the ▲ or ▼ button to select Edit Name, then  
press the ENTER button.  
Cable STB  
Sat. STB  
AV Receiver  
DVD Receiver  
2
3
Press the ▲ or ▼ button to select AV1, AV2, or Component input jack, then press the  
ENTER button.  
Move  
Enter  
Return  
Press the ▲ or ▼ button to select VCR, DVD, Cable STB, Sat. STB, AV Receiver,  
DVD Receiver, Game, Camcorder, or DVD Combo input source, then press the ENTER  
button.  
Press the EXIT button to exit.  
Using Automatic Picture Settings  
Your TV has four automatic picture settings (“Dynamic”, “Standard”, “Movie”, “Custom”)  
that are preset at the factory.  
Mode  
Mode  
:
Dynamic  
You can activate a Picture Setting by making a selection from the menu.  
Contrast  
Brightness  
Sharpness  
Color  
Tint  
Color Tone  
Reset  
Standard  
50  
Movie  
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Picture, then press the ENTER button.  
:
Custom  
: G 50 R 50  
: Cool1  
2
Press the ENTER button to select Mode.  
Press the ENTER button again. Press the ▲ or ▼ button to select the Dynamic, Standard,  
Movie, or Custom picture setting, then press the ENTER button.  
Move  
Enter  
Return  
Choose Dynamic for viewing the TV during the day or when there is bright light in the  
room.  
Choose Standard for general TV watching mode.  
Choose Movie when watching movies.  
Choose Custom if you want to adjust the settings according to personal preference.  
Press the P.MODE button on the remote control to select one of the standard picture  
settings.  
Continued...  
English - 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
4
Press the ▲ or ▼ button to select Contrast, Brightness, Sharpness, Color, or Tint, then  
press the ENTER button.  
Press the ◄ or ► button to decrease or increase the value of a particular item.  
Contrast  
Mode  
100  
You can not adjust the Tint in DTV, AV, or Component mode.  
Press the ENTER button to return to Mode.  
Mode  
5
6
7
: Dynamic  
Press the ▲ or ▼ button to select Color Tone, then press the ENTER button.  
Press the ▲ or ▼ button to select Cool2, Cool1, Normal, Warm1, or Warm2, then press the  
ENTER button.  
Contrast  
:
:
:
:
100  
50  
Brightness  
Sharpness  
Color  
Tint  
Color Tone  
Reset  
Cool2  
Cool1  
Normal  
:
Warm1  
:
Resetting the Picture Settings to the Factory Defaults  
8
Warm2  
Press the ▲ or ▼ button to select Reset, then press the ENTER button.  
Press the EXIT button to exit.  
Move  
Enter  
Return  
Each picture mode can be reset.  
Changing the Screen Size  
You can select the picture size which best corresponds to your viewing requirements.  
Picture  
Mode  
Size  
Digital NR  
Tilt  
: Dynamic  
:
Zoom  
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Picture, then press the ENTER button.  
Normal  
:
0
2
3
Press the ▲ or ▼ button to select Size, then press the ENTER button.  
Press the ▲ or ▼ button to select the screen format you want, then press the ENTER button.  
Press the EXIT button to exit.  
Move  
Enter  
<TV Mode>  
Return  
Normal: Sets the picture to 4:3 normal mode.  
Zoom: Magnifies the size of the picture on the screen.  
Wide: Sets the picture to 16:9 wide mode.  
Press the P.SIZE button on the remote control repeatedly to change the picture size.  
Changing the screen size is determined by the TV signal type being viewed. Analog and  
Digital signals display different screen sizes.  
Analog TV Mode: Switching between Normal and Zoom is possible. The TV must  
be connected to Analog Air/Cable, or to an external device via Composite, S-Video or  
Component to view these screen sizes.  
Digital TV Mode: Switching between Normal and Wide is possible. The TV must be  
connected to Digital Air/Cable to view these screen sizes  
To identify whether the current mode is TV Mode or DTV Mode, press the INFO button on  
the remote control. To switch between Analog and Digital Air/Cable mode, press the TV/DTV  
button on the remote.  
Analog TV Mode  
Digital TV Mode  
Normal  
Zoom  
Normal  
Wide  
Digital Noise Reduction  
If the signal received by the television is weak, you can activate this feature to reduce any  
static and ghosting that may appear on the screen.  
Picture  
Mode  
Size  
Digital NR  
Tilt  
: Dynamic  
: Normal  
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Picture, then press the ENTER button.  
Off  
:
On  
:
2
3
Press the ▲ or ▼ button to select Digital NR, then press the ENTER button.  
Press the ▲ or ▼ button to select Off or On, then press the ENTER button.  
Press the EXIT button to exit.  
Move  
Enter  
Return  
English - 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tilt (TX-T2781/TX-T2782 only)  
Due to the Earth’s magnetic field there may be some minor image tilt depending on the TV’s  
location. When this occurs, follow the steps below.  
Picture  
Mode  
Size  
Digital NR  
Tilt  
: Dynamic  
: Normal  
: On  
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Picture, then press the ENTER button.  
:
+ 2  
2
3
Press the ▲ or ▼ button to select Tilt, then press the ENTER button.  
Press the ◄ or ► button to adjust screen tilt.  
Press the EXIT button to exit.  
Move  
Adjust  
Return  
Using Automatic Sound Settings  
Your TV has automatic sound settings (“Standard”, “Music”, “Movie”, “Speech”, and  
“Custom”) that are preset at the factory. Or, you can select “Custom”, which automatically  
recalls your personalized sound settings.  
Sound  
Mode  
Equalizer  
MTS  
Auto Volume  
Pseudo Stereo  
Turbo Plus  
: Standard  
Music
: Movie
Speech  
Custom  
: Off  
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Sound, then press the ENTER button.  
2
Press the ENTER button to select Mode. Press the ▲ or ▼ button to select Standard, Music,  
Movie, Speech, or Custom sound setting, then press the ENTER button.  
Move  
Enter  
Return  
Press the EXIT button to exit.  
Choose Standard for the standard factory settings.  
Choose Music when watching music videos or concerts.  
Choose Movie when watching movies.  
Choose Speech when watching a show that is mostly dialog (i.e., news).  
Choose Custom to recall your personalized settings (see “Customizing the Sound”).  
Press the S.MODE button on the remote control repeatedly to select one of the standard  
sound settings.  
Customizing the Sound  
The sound settings can be adjusted to suit your personal preference. (Alternatively, you  
can use one of the “automatic” settings.)  
Equalizer  
R
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Sound, then press the ENTER button.  
L
2
3
Press the ▲ or ▼ button to select Equalizer, then press the ENTER button.  
100 300 1K  
Adjust  
3K 10K  
Return  
Press the ◄ or ► button to select a particular frequency to adjust.  
Press the ▲ or ▼ button to increase or decrease the level of the particular frequency, then  
press the ENTER button.  
Move  
Press the EXIT button to exit.  
R/L Sound Balance Adjustment:  
To adjust the sound balance of the R/L speakers.  
Bandwidth Adjustment(100, 300, 1K, 3K, 10K):  
To adjust the level of different bandwidth frequencies.  
If you make any changes to the equalizer settings, the sound mode is automatically switched to the Custom.  
English - 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Choosing a Multi-Channel Sound (MTS) Track - Digital  
The digital-TV transmission system is capable of simultaneous transmission of many audio  
tracks (for example, simultaneous translations of the program into foreign languages).  
The availability of these additional “multitracks” depends upon the program.  
Sound  
Mode  
Equalizer  
Pref. lang.  
Auto Volume  
Pseudo Stereo  
Turbo Plus  
: Custom  
English
Spanish  
French  
: Off  
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Sound, then press the ENTER button.  
2
3
Press the ▲ or ▼ button to select Pref. lang., then press the ENTER button.  
Move  
Enter  
Return  
Press the ▲ or ▼ button to choose the language (English, Spanish, or French) you want,  
then press the ENTER button.  
Press the EXIT button to exit.  
Press the MTS button on the remote control to listen in a language other than the  
preferred language.  
Choosing a Multi-Channel Sound (MTS) Track - Analog  
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Sound, then press the ENTER button.  
Sound  
Mode  
Equalizer  
MTS  
Auto Volume  
Pseudo Stereo  
Turbo Plus  
: Custom  
: Mono
Stereo  
SAP
2
3
Press the ▲ or ▼ button to select MTS, then press the ENTER button.  
Press the ▲ or ▼ button to select a setting you want, then press the ENTER button.  
Press the EXIT button to exit.  
: Off  
Move  
Enter  
Return  
Choose Mono for channels that are broadcasting in mono, or if you are having difficulty  
receiving a stereo signal.  
Choose Stereo for channels that are broadcasting in stereo.  
Choose SAP to listen to the Separate Audio Program, which is usually a foreign  
language translation.  
Press the MTS button on the remote control repeatedly to select Mono, Stereo, or SAP.  
Automatic Volume Control  
Sound  
Reduces the differences in volume level among broadcasters.  
Mode  
Equalizer  
MTS  
Auto Volume  
Pseudo Stereo  
Turbo Plus  
: Custom  
: Stereo  
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Sound, then press the ENTER button.  
:
Off  
:
On  
2
3
Press the ▲ or ▼ button to select Auto Volume, then press the ENTER button.  
Press the ▲ or ▼ button to select On or Off, then press the ENTER button.  
Press the EXIT button to exit.  
: Off  
Move  
Enter  
Return  
English - 14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Pseudo Stereo  
“Pseudo Stereo” converts a mono sound signal into two identical left and right channels.  
Once the “Pseudo Stereo” is set to “On” or “Off”, the setting is applied to sound effects  
such as “Standard”, “Music”, “Movie”, and “Speech”.  
Sound  
Mode  
Equalizer  
MTS  
Auto Volume  
Pseudo Stereo  
Turbo Plus  
: Custom  
: Stereo  
: Off  
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Sound, then press the ENTER button.  
:
Off  
:
On  
2
3
Press the ▲ or ▼ button to select Pseudo Stereo, then press the ENTER button.  
Press the ▲ or ▼ button to select On or Off, then press the ENTER button.  
Press the EXIT button to exit.  
Move  
Enter  
Return  
Using Turbo Plus  
“Turbo Plus” emphasizes the bass and treble frequencies to add fullness to the sound.  
Sound  
Mode  
Equalizer  
MTS  
Auto Volume  
Pseudo Stereo  
Turbo Plus  
: Custom  
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Sound, then press the ENTER button.  
: Stereo  
: Off  
: Off  
2
3
Press the ▲ or ▼ button to select Turbo Plus, then press the ENTER button.  
Press the ▲ or ▼ button to select On or Off, then press the ENTER button.  
Press the EXIT button to exit.  
:
Off  
On  
Move  
Enter  
Return  
Press the TURBO button on the remote control repeatedly to select On or Off.  
Clearing Scrambled Channels - Digital  
The Clear Scrambled Channel function is used to filter out scrambled channels after Auto  
Program is completed.  
It removes the scrambled channels from the list by tuning the digital cable channels.  
This process may take up to 20~30 minutes.  
Channel  
Antenna  
Auto Program  
: Cable  
Clear Scrambled Channel  
Add/Delete  
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Channel, then press the ENTER button.  
Fine Tune  
Name  
Signal Strength  
2
Press the ▲ or ▼ button to select Clear Scrambled Channel, then press the ENTER button.  
It searches scrambled channels, which are to be removed from the list.  
Move  
Enter  
Return  
To stop searching scrambled channels;  
Press the ▼ button to select Stop, then press the ENTER button.  
Press the ◄ button to select Yes, then press the ENTER button.  
Clear Scrambled Channel  
Removing Scrambled Channel.  
3
When the scrambled channel searching is completed, press the ENTER button.  
Press the EXIT button to exit.  
DTV STD 50-1  
60%  
Stop  
Return  
Enter  
Adding and Erasing Channels - Analog  
You can add or delete a channel to display the channels you want.  
Add/Delete  
▲ More  
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Channel, then press the ENTER button.  
Press the ▲ or ▼ button to select Add/Delete, then press the ENTER button.  
Press the ▲ or ▼ button to select the desired channel, then press the ENTER button.  
Press the ▲ or ▼ button to select Deleted or Added, then press the ENTER button.  
Press the EXIT button to exit.  
Air  
Air  
Air  
Air  
Air  
2
3
4
5
6
:
Deleted  
:
Added  
2
3
4
: Deleted  
: Deleted  
: Deleted  
▼ More  
Move  
Enter  
Return  
Press the ADD/DEL button on the remote control. Press the CH  
and CH  
button to  
select the channel to be added or deleted, then press the ENTER button.  
English - 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adding and Erasing Channels - Digital  
You can add or delete a DTV channel to display the DTV channels you want.  
Add/Delete  
Delete  
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Channel, then press the ENTER button.  
DTV  
2
3
Press the ▲ or ▼ button to select Add/Delete, then press the ENTER button.  
Air 50-1  
Added  
Press the CH  
or CH  
button to select the desired channel, then press the ENTER  
button and select Delete or Add.  
Press the EXIT button to exit.  
Return  
Ch.Change  
Enter  
Press the ADD/DEL button on the remote control. Press the CH  
and CH  
button to  
select the channel to be added or deleted, then press the ENTER button.  
Fine Tuning Analog Channels - Analog  
Use fine tuning to manually adjust a particular channel for optimal reception.  
Fine Tune  
Reset  
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Channel, then press the ENTER button.  
Air 3 ✽  
+ 2  
2
3
4
Press the ▲ or ▼ button to select Fine Tune, then press the ENTER button.  
Press the ◄ or ► button to adjust the fine tuning.  
Move  
Adjust  
Return  
To store the fine tuning setting in the TV’s memory, press the ENTER button.  
To reset the fine tuning setting, press the ▼ button to select Reset, then press the ENTER  
button.  
Press the EXIT button to exit.  
Only analog TV channels can be fine tuned.  
“*” will appear next to the number of fine-tuned channels.  
Labeling Channels - Analog  
Channels can be labeled so that their call letters appear whenever the channel is selected.  
Name  
▲ More  
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Channel, then press the ENTER button.  
Press the ▲ or ▼ button to select Name, then press the ENTER button.  
Air  
Air  
Air  
Air  
Air  
2
: A  
3
4
5
6
: - - - -  
: - - - -  
: - - - -  
: - - - -  
2
3
Press the ▲ or ▼ button to select the channel to be assigned a new name, then press the  
ENTER button.  
▼ More  
Move  
Adjust  
Return  
Press the ▲ or ▼ button to select a letter, a number or a blank(Results in this sequence: A~Z,  
0~9, blank, , -). Press the ► button to switch to the next field, which will be selected. Select a  
*
second letter or digit by pressing the ▲ or ▼ button, as above. Repeat the process to select  
the last two digits. When you have finished, press the ENTER button to assign the new name.  
Press the EXIT button to exit.  
The names of digital broadcasting channels are automatically assigned and thus cannot  
be assigned by users.  
If you add or delete the TV channel, the corresponding label information will also be  
added or deleted.  
English - 16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Checking the Digital-Signal Strength - Digital  
Unlike analog channels, which can vary in reception quality from “snowy” to clear,  
digital(HDTV) channels have either perfect reception quality or you will not receive them at  
all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however,  
adjust your antenna to improve the reception of available digital channels.  
Signal Strength  
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Channel, then press the ENTER button.  
OK  
2
Press the ▲ or ▼ button to select Signal Strength, then press the ENTER button.  
If the signal strength meter indicates that the signal is weak, physically adjust your antenna  
to increase the signal strength. Continue to adjust the antenna until you find the best position  
with the strongest signal.  
Enter  
Return  
Press the EXIT button to exit.  
You can also press the ENTER button to select OK, then press the EXIT button to exit.  
Using the R.Surf Feature  
This feature allows you to set the TV to return to a particular channel after a certain amount  
of time. For example, you may be watching a channel when commercials start. You can set  
the R.Surf to “5 minutes”, then switch channels. After 5 minutes, the TV will return to the  
original channel. To use the R.Surf feature:  
1
While you are watching the channel to which you want to return, press the R.SURF button.  
The Surf Off is displayed.  
2
Press the R.SURF button again to set the timer in thirty second intervals, up to five minutes.  
The time will start decreasing while you are setting up the timer, and will reset after  
5 minutes has passed or you turn it off.  
3
The time you set will begin counting down on the screen.  
When the time runs out, the TV will return to the channel you were watching when you set the  
timer.  
Surf  
00: 29  
Selecting a Menu Language  
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Setup, then press the ENTER button.  
Language  
English  
Español  
Français  
2
3
Press the ▲ or ▼ button to select Language, then press the ENTER button.  
Press the ▲ or ▼ button to select the appropriate language: English, Español or Français,  
then press the ENTER button.  
Press the EXIT button to exit.  
Move  
Enter  
Return  
English - 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Time  
Setting the clock is necessary in order to use the various timer features of the TV.  
Also, you can check the time while watching the TV. (Just press the INFO button.)  
Time  
12 : 00 am  
Clock  
Sleep Timer  
On Timer  
Off Timer  
: Off  
-- : -- am Off  
-- : -- am Off  
1
Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then  
press the ENTER button. Press the ▲ or ▼ button to select Time, then press the ENTER  
button.  
On Timer Source  
On Timer Antenna  
On Timer Channel  
On Timer Volume  
:
:
:
TV  
Air  
3
2
3
Press the ENTER button to select Clock.  
:
10  
Move  
Adjust  
Return  
Press the ◄ or ► button to move to the hour or minute.  
Set the clock by pressing the ▲ or ▼ button, then press the ENTER button.  
Press the EXIT button to exit.  
The current time will appear every time you press the INFO button.  
Setting the Sleep Timer  
Time  
09 : 30 am  
Off  
The Sleep Timer automatically shuts off the TV after a preset time(from 30 to 180 minutes).  
Clock  
Sleep Timer  
On Timer  
Off Timer  
:
1
Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then  
press the ENTER button. Press the ▲ or ▼ button to select Time, then press the ENTER  
button.  
30  
-- : -
60  
-- : -
90  
On Timer Source  
On Timer Antenna  
On Timer Channel  
On Timer Volume  
120  
150  
2
3
Press the ▲ or ▼ button to select Sleep Timer, then press the ENTER button.  
180  
:
10  
Move  
Enter  
Return  
Press the ▲ or ▼ button to select the minutes.  
To cancel the set sleep timer:  
Press the ▲ or ▼ button to select Off, then press the ENTER button.  
Press the EXIT button to exit.  
Press the SLEEP button on the remote control until the appropriate time interval appears  
(any of the preset values from 30 min to 180 min).  
Setting the On/Off Timer  
Time  
Clock  
09 : 30 am  
: Off  
12 : 00 am Off  
-- : -- am Off  
Use this feature to set the TV to turn on or off at a desired time.  
You must set the clock first.  
Sleep Timer  
On Timer  
Off Timer  
On Timer Source  
On Timer Antenna  
On Timer Channel  
On Timer Volume  
1
Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then  
press the ENTER button. Press the ▲ or ▼ button to select Time, then press the ENTER  
button.  
:
:
:
TV  
Air  
3
:
10  
Move  
Adjust  
Return  
2
3
Press the ▲ or ▼ button to select On Timer, then press the ENTER button.  
Time  
Press the ▲ or ▼ button to set the hour, then press the ► button to move to the next step.  
Set other items using the same method as above.  
Clock  
09 : 30 am  
: Off  
06 : 30 am On  
11 : 00 pm On  
Sleep Timer  
On Timer  
Off Timer  
On Timer Source  
On Timer Antenna  
On Timer Channel  
On Timer Volume  
When finished, press the MENU button to return.  
:
:
:
TV  
Air  
3
4
5
Press the ▲ or ▼ button to select Off Timer, then press the ENTER button.  
Press the ▲ or ▼ button to set the hour, then press the ► button to move to the next step.  
Set other items using the same method as above.  
:
10  
Move  
Adjust  
Return  
When finished, press the MENU button to return.  
Auto Power Off  
When you set the timer “On”, the TV will eventually turn off if no controls are operated for 3  
hours after the TV was turned on by timer. This function is only available in timer “On” mode  
and prevents overheating, which may occur if a TV is on for too long time.  
Setting the Preferred Option  
The preferred TV source, antenna, channel and volume can be set for when the timer  
automatically turns on the TV.  
Time  
Clock  
09 : 30 am  
: Off  
06 : 30 am On  
11 : 00 pm On  
Sleep Timer  
On Timer  
Off Timer  
On Timer Source  
On Timer Antenna  
On Timer Channel  
On Timer Volume  
6
7
8
Press the ▲ or ▼ button to select On Timer Source, then press the ENTER button.  
Press the ▲ or ▼ button to select TV or DTV, then press the ENTER button.  
:
:
:
TV  
DTV  
Press the ▲ or ▼ button to select On Timer Antenna, then press the ENTER button.  
Press the ▲ or ▼ button to select Air or Cable, then press the ENTER button.  
3
:
10  
Return  
Move  
Enter  
Press the ▲ or ▼ button to select On Timer Channel or On Timer Volume.  
Press the ◄ or ► button to select the desired channel or adjust volume level.  
Press the EXIT button to exit.  
English - 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing Closed Captions(On-Screen Text Messages) - Digital  
The Digital Captions function operates on digital channels.  
Caption  
Caption  
Mode  
Options  
:
Default  
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Setup, then press the ENTER button.  
Service1  
:
Service2  
Service3  
Service4  
Service5  
Service6  
CC1  
2
3
Press the ▲ or ▼ button to select Caption, then press the ENTER button.  
Press the ENTER button to select Caption. Press the ▲ or ▼ button to select On, then press  
the ENTER button.  
Move  
Enter  
Return  
4
Press the ▲ or ▼ button to select Mode, then press the ENTER button.  
Press the ▲ or ▼ button to select the submenu (Default, Service1~Service6, CC1~CC4, or  
Text1~Text4) you want, then press the ENTER button.  
Options  
Size  
Font Style  
Fore Color  
: Default  
: Default  
: Default  
5
6
Press the ▲ or ▼ button to select Options, then press the ENTER button.  
Back Color : Default  
Fore Opacity : Default  
Back Opacity : Default  
Return to Default  
Press the ENTER button to select Size. Press the ▲ or ▼ button to select the desired caption  
option, then press the ENTER button. Press the ▲ or ▼ button to select the desired sub-  
menu options(see options below), then press the ENTER button.  
Move  
Enter  
Return  
Press the EXIT button to exit.  
The availability of captions depends on the program being broadcast.  
Default means to follow the standard set by the broadcaster.  
Fore(Foreground) and Back cannot be set to have the same color.  
Fore Opacity and Back Opacity cannot be both set to Transparent.  
Size: This option consists of Default, Small, Standard, and Large. The default is Standard.  
Font Style: This option consists of Default, Style0 ~ Style7. You can change the font you want.  
The default is Style0.  
Fore Color: This option consists of Default, White, Black, Red, Green, Blue, Yellow, Magenta, and Cyan. You can change the  
color of the letter. The default is White.  
Back Color: This option consists of Default, White, Black, Red, Green, Blue, Yellow, Magenta, and Cyan. You can change the  
background color of the caption. The default is Black.  
Fore Opacity: This option consists of Default, Solid, Flashing, Translucent, and Transparent.  
You can change the opacity of the letter.  
Back Opacity: This option consists of Default, Solid, Flashing, Translucent, and Transparent.  
You can change the background opacity of the caption.  
Return to Default: This option sets each of Size, Font Style, Fore Color, Back Color, Fore Opacity, and Back Opacity to its  
factory default.  
You can also press the CAPTION button on the remote control to select Captions On or  
Off.  
Viewing Closed Captions(On-Screen Text Messages) - Analog  
The Analog Caption function operates in either analog TV channel mode or external signal  
Caption  
mode. (Depending on the broadcasting signal, the Analog Caption function may operate on  
digital channels.)  
Caption  
Mode  
Channel  
Field  
: O
Off  
:
On  
: 1  
: 1  
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Setup, then press the ENTER button.  
2
3
Press the ▲ or ▼ button to select Caption, then press the ENTER button.  
Move  
Enter  
Return  
Press the ENTER button to select Caption.  
Press the ▲ or ▼ button to select On, then press the ENTER button.  
Misspellings and unusual characters sometimes occur during closed caption  
transmissions, especially those of live events. There may be a small delay before captions  
appear when you change channels. These are not malfunctions of the TV.  
4
Press the ▲ or ▼ button to select Mode, then press the ENTER button.  
Press the ▲ or ▼ button to select the Caption or Text, then press the ENTER button.  
In Caption mode, captions appear at the bottom of the screen, and they usually cover  
only a small portion of the picture.  
In Text mode, information unrelated to the program, such as news or weather, is  
displayed. Text often covers a large portion of the screen.  
Continued...  
English - 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Depending on the particular broadcast, it might be necessary to make changes to Channel  
and Field. Press the ▲ or ▼ button to select Channel or Field, then press the ENTER button.  
Press the ▲ or ▼ button to select 1 or 2, then press the ENTER button.  
Different channels and fields display different information:  
Field 2 carries additional information that supplements the information in Field 1.  
(For example, Channel 1 may have subtitles in English, while Channel 2 has subtitles in  
Spanish.)  
Press the EXIT button to exit.  
You can also press the CAPTION button on the remote control to select Captions On or  
Off.  
Setting the Blue Screen Mode  
If no signal is being received or the signal is very weak, a blue screen automatically  
replaces the noisy picture background. If you wish to continue viewing the poor picture,  
you must set the “Blue Screen” mode to “Off”.  
Setup  
Plug & Play  
Language  
Time  
: English  
Caption  
Blue Screen  
Melody  
V-Chip  
Software upgrade  
1
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Setup, then press the ENTER button.  
:
:
On  
Off  
2
Press the ▲ or ▼ button to select Blue Screen, then press the ENTER button.  
Press the ▲ or ▼ button to select On or Off, then press the ENTER button.  
Move  
Enter  
Return  
Press the EXIT button to exit.  
Setting the On/Off Melody  
A melody sound can be set to come on when the TV is powered On or Off.  
Setup  
Plug & Play  
Language  
Time  
Caption  
Blue Screen  
Melody  
1
2
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Setup, then press the ENTER button.  
: English  
: Off  
: Off  
On  
Press the ▲ or ▼ button to select Melody, then press the ENTER button.  
Press the ▲ or ▼ button to select On or Off, then press the ENTER button.  
V-Chip  
Software upgrade  
Move Enter  
Press the EXIT button to exit.  
Return  
TRADEMARK & LABEL LICENSE NOTICE  
Manufactured under license from Dolby Laboratories. Dolby and the double-D  
symbol are trademarks of Dolby Laboratories.  
Using the V-Chip  
U.S.A Only  
This product is covered by the following U.S. patents : US4,930,158 US4,930,160  
The V-Chip feature automatically locks out programs that are deemed inappropriate for children.  
The user must enter a PIN(Personal ID number) before any of the V-Chip restrictions are set up or changed.  
How to Enable/Disable the V-Chip  
V-Chip  
1
2
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Setup, then press the ENTER button.  
V-Chip Lock  
Change PIN  
:
Off  
On  
Press the ▲ or ▼ button to select V-Chip, then press the ENTER button.  
The message Enter PIN will appear. Enter your 4 digit PIN.  
The default PIN of a new TV set is “0-0-0-0”.  
3
The V-Chip screen will appear. To enable the V-Chip feature, press the ENTER button so that  
the V-Chip Lock field is On. (Pressing the ▲ or ▼ button will alternate between On and Off.)  
Move  
Enter  
Return  
Continued...  
English - 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up Your Personal ID Number(PIN)  
V-Chip  
4
5
Press the ▲ or ▼ button to select Change PIN, then press the ENTER button.  
V-Chip Lock  
TV Parental Guidelines  
MPAA Rating  
Downloadable U.S. Rating  
Change PIN  
: On  
The Enter New PIN screen will appear. Choose any 4 digits for your PIN and enter them.  
As soon as the 4 digits are entered, the Confirm New PIN screen appears. Re-enter the  
same 4 digits. When the Confirm screen disappears, your PIN has been memorized.  
If you forget the PIN, press the remote control buttons in the following sequence, which resets  
the pin to 0-0-0-0 : Power Off → MUTE → 8 → 2 → 4 → Power On.  
Move  
Enter  
Return  
<for USA models only >  
How to Set up Restrictions Using the ‘TV Parental Guidelines’  
V-Chip  
First, set up a personal identification number(PIN), and enable the V-Chip.  
(See previous section.)  
Parental restrictions can be set up using either of two methods:  
The TV guidelines or the MPAA rating.  
V-Chip Lock  
TV Parental Guidelines  
MPAA Rating  
Canadian English  
Canadian French  
Downloadable U.S. Rating  
Change PIN  
: On  
6
7
Press the ▲ or ▼ button to select TV Parental Guidelines, then press the ENTER button.  
Press the ▲ or ▼ button to select one of the six aged based categories:  
Move  
Enter  
Return  
TV-Y: Young children.  
TV-Y7: Children 7 and  
TV-PG: Parental guidance.  
TV-14: Viewers 14 and  
<for Canada models only>  
over.  
over.  
TV-G: General audience.  
TV-MA: Mature audience.  
TV Parental Guidelines  
ALL FV  
B
V
S
L
D
TV-Y  
8
Press the ► button. Press the ▲ or ▼ button to select B or U. (U: Unblocked, B: Blocked)  
Press the MENU button to save. To select a different TV-Rating, press the ▲ or ▼ button and  
then repeat the process.  
TV-Y7  
TV-G  
B
U
U
U
U
B
TV-PG  
TV-14  
TV-MA  
U
U
U
U
U
U
U
U
U
U
U
The TV-Y, TV-Y7, TV-G, TV-PG, TV-14 and TV-MA have additional options.  
B: Blocked  
U: Unblocked  
See the next step to change any of the following sub-ratings.  
Move  
Adjust Return  
FV: Fantasy violence.  
D: Sexually suggestive dialog.  
L: Adult language.  
S: Sexual situation.  
V: Violence.  
The V-Chip will automatically block certain categories that are “more restrictive”. For example, if you block TV-Y category, then  
TV-Y7 will automatically be blocked. Similarly, if you block the TV-G category, then all the categories in the “young adult” group  
will be blocked (TV-G, TV-PG, TV-14, and TV-MA). The sub-ratings (D, L, S, V) work together similarly. (See next section.)  
9
How to set the FV, V, S, L, and D sub-ratings. First, select one of these TV-Ratings: TV-Y, TV-Y7, TV-G, TV-PG, TV-14, or TV-MA  
(See Step 7), and press the ► button. The B will be displayed for each sub-rating. While B is selected, press the ► button to go to  
a sub rating. Press the ▲ or ▼ to block the sub rating. Press the MENU button to save. To select a different TV-Rating, press the  
▲ or ▼ button and then repeat the process.  
The V-chip will automatically block certain categories that are “more restrictive”.  
For example, if you block L sub-rating in TV-PG, then the L sub-ratings in TV-14 and TV-MA will automatically be blocked.  
These categories consist of two separate groups: TV-Y and TV-Y7 (young children through age 7), and TV-G through TV-MA  
(everybody else). The restrictions for these two groups work independently: If a household includes very young children as well as  
young adults, the TV guidelines must be set up separately for each age group.  
How to Set up Restrictions Using the MPAA Ratings: G, PG, PG-13, R, NC-17, X, NR  
The MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main application is for  
movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings  
(either MPAA or TV-Ratings).  
10 Press the ▲ or ▼ button to select MPAA Rating, then press the ENTER button.  
MPAA Rating  
G
B
11 Press the ▲ or ▼ button to select an appropriate restriction. Press the ► button, then press  
the ▲ or ▼ button to select B or U (U: Unblocked, B: Blocked).  
Press the MENU button to save.  
PG  
B
PG-13  
B
R
B
NC-17  
B
X
B
G: General audience(no restriction).  
PG: Parental guidance suggested.  
PG-13: Parents strongly cautioned.  
R: Restricted. Children under 17 should be accompanied by an adult.  
NC-17: No children under age 17.  
X: Adults only.  
NR  
U
B: Blocked  
U: Unblocked  
Move  
Adjust  
Return  
NR: Not rated.  
The V-Chip will automatically block any category that is “more restrictive”.  
For example, if you block the PG-13 category, then R, NC-17, and X will automatically be blocked also.  
Continued...  
English - 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Set up Restrictions Using the ‘Canadian English’ (for Canada Models)  
Canadian English  
12 Press the ▲ or ▼ button to select Canadian English, then press the ENTER button.  
E
B
C
U
13 Press the ▲ or ▼ button to select an appropriate restriction. Press the ► button.  
Press the ▲ or ▼ button to select B or U (U: Unblocked, B: Blocked).  
Press the MENU button to save.  
C8+  
U
G
U
PG  
U
14+  
U
18+  
U
E: Exempt programming includes...news, sports, documentaries and other information  
programming, talk shows, music videos, and variety programming.  
C: Programming intended for children under age 8.  
C8+: Programming generally considered acceptable for children 8 years and over to  
watch on their own.  
B: Blocked  
U: Unblocked  
Move  
Adjust  
Return  
G: General programming, suitable for all audiences.  
PG: Parental guidance.  
14+: Programming contains themes or content which may not be suitable for viewers  
under the age of 14.  
18+: Adult programming.  
The V-Chip will automatically block any category that is “more restrictive”.  
For example, if you block G category, then PG, 14+, and 18+ will automatically be blocked also.  
How to Set up Restrictions Using the ‘Canadian French’ (for Canada Models)  
14 Press the ▲ or ▼ button to select Canadian French, then press the ENTER button.  
Canadian French  
E
G
B
U
U
U
U
U
15 Press the ▲ or ▼ button to select a appropriate restriction. Press the ► button.  
Press the ▲ or ▼ button to select B or U (U: Unblocked, B: Blocked).  
Press the MENU button to save.  
8 ans+  
13 ans+  
16 ans+  
18 ans+  
E: Exempt programming includes...news, sports, documentaries and other information  
programming, talk shows, music videos, and variety programming.  
G: General.  
B: Blocked  
Move  
U: Unblocked  
Adjust  
Return  
8 ans+: Not recommended for young children.  
13 ans+: Programming may not be suitable for children under the age of 13.  
16 ans+: Programming is not suitable for children under the age of 16.  
18 ans+: Programming restricted to adults.  
The V-Chip will automatically block any category that is “more restrictive”.  
For example, if you block 8 ans+ category, then 13 ans+, 16 ans+, and 18 ans+ will automatically be blocked also.  
Using the V-Chip for Digital channels  
Parental restriction information can be used while watching DTV channels.  
V-Chip  
V-Chip Lock  
TV Parental Guidelines  
MPAA Rating  
Canadian English  
Canadian French  
Downloadable U.S. Rating  
Change PIN  
: On  
16 Press the ▲ or ▼ button to select Downloadable U.S. Rating, then press the ENTER button.  
If information is not downloaded from the broadcasting station, the Downloadable  
U.S. Rating menu is deactivated.  
Parental restriction information is automatically downloaded while watching DTV  
channels. It may take several seconds.  
The Downloadable U.S. Rating menu is available for use after information is  
downloaded from the broadcasting station. However, depending on the information  
from the broadcasting station, it may not be available for use.  
Move  
Enter  
Return  
The number of  
current rating title  
17 Press the ▲ or ▼ button to select an appropriate restriction. Press the ENTER button to  
Rating title  
activate the restriction selected. The  
(Lock) symbol is indicated.  
Press the EXIT button to exit.  
Downloadable U.S. Rating  
Allow All: Press to unlock all TV ratings.  
Humor Level  
1/ 2  
Block All: Press to lock all TV ratings.  
NV  
MV  
V
VV  
EV  
Allow All  
Block All  
Parental restriction levels differ depending on the broadcasting station.  
The default menu name and Downloadable US rating changes depending on the  
downloaded information.  
Even if you set the On-screen display to your desired language, the Downloadable  
U.S. Rating menu will appear in English only.  
Move  
Enter  
Return  
The rating will automatically block certain categories that are more restrictive.  
The rating titles (for example: Humor Level..etc) and TV ratings (for example: NV, MV,  
V...etc) may differ depending on the broadcasting station.  
The number of all rating title  
English - 22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Upgrading the Software  
Samsung may offer upgrades for your TV’s firmware in the future. Please contact the  
Samsung call center at 1-800-SAMSUNG to receive information about downloading  
upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to  
the USB port located on the back of your TV.  
USB Drive  
1
2
Insert a USB drive containing the firmware upgrade into the USB Upgrade Port on the back of  
the TV.  
Press the MENU button to display the menu.  
Press the ▲ or ▼ button to select Setup, then press the ENTER button.  
3
4
Press the ▲ or ▼ button to select Software upgrade, then press the ENTER button.  
Software upgrade  
Press the ▲ or ▼ button to select USB Upgrade, then press the ENTER button.  
The message Scanning for USB... It may take up to 30 seconds. is displayed.  
Please be careful to not disconnect the power or remove the USB drive while upgrades are  
being applied.  
USB Upgrade  
The TV will shut off and turn on automatically after completing the firmware upgrade.  
Please check the firmware version after the upgrades are complete.  
The firmware and upgrade process may be different by country and region.  
Move  
Enter  
Return  
USB Upgrade  
Scanning for USB...  
It may take up to 30 seconds.  
Identifying Problems  
If the TV seems to have a problem, first try this list of possible problems and solutions.  
If none of these troubleshooting tips apply, call your nearest Samsung service center.  
Problem  
Possible Solution  
Poor picture quality.  
Try another channel.  
Adjust the antenna.  
Check all wire connections.  
Poor sound quality.  
No picture or sound.  
Try another channel.  
Adjust the antenna.  
Try another channel.  
Press the SOURCE button.  
Make sure the TV is plugged in.  
Check the antenna connections.  
Make sure the MUTE button is off.  
No sound or sound is too low at  
maximum volume.  
First, check the volume of units connected to your TV (digital broadcasting receiver, DVD,  
cable broadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly.  
Picture rolls vertically.  
Check all connections.  
The TV operates erratically.  
The TV won’t turn on.  
Unplug the TV for 30 seconds, then try operating it again.  
Make sure the wall outlet is working.  
Remote control malfunctions  
Replace the remote control batteries.  
Clean the upper edge of the remote control(transmission window).  
Check the battery terminals.  
Press the TV/DTV button to put your remote control in the “TV” mode.  
Make sure the remote has batteries.  
Check that the “+” and “-” ends of the batteries are inserted correctly.  
Digital broadcasting screen problem. Please check the digital signal strength and input antenna.  
The image is too light or too dark.  
Adjust the Brightness and Contrast.  
Adjust the Fine tuning.  
The visual qualities of digital  
channels vary.  
The visual qualities of digital channels may vary depending on the original production  
method(analog or digital).  
-
-
If the original production method is digital: High visual quality program.  
If the original production method is analog: The digital program displayed on the screen is  
originally an analog program which has been converted to digital. The visual quality is of an  
SD(Standard Definition) grade.  
Although the TV caption shows HD,  
the visual quality is not satisfactory.  
The HD(High Definition) caption that appears when switching channels or when pressing the  
Information button on the remote control means the selected channel is a digital channel. If the  
broadcasting station converts an analog signal into digital and transmits the signal, the visual  
quality may not be perfect.  
English - 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Model Name  
TX-T2781  
TX-T2782  
TX-T2082  
Screen Size (Diagonal)  
Sound Output  
27 inches  
20 inches  
5W X 2  
Dimensions (WxHxD)  
Body  
30.35 x 23.34x 16.53 inches /  
771 x 593 x 420 mm  
31.33 x 23.34 x 16.57 inches /  
796 x 593 x 421 mm  
23.77 x 18.58 x 14.19 inches /  
604 x 472 x 360.5 mm  
Weight  
90.38 lbs / 41 Kg  
94.79 lbs / 43 Kg  
44.09 lbs / 20 Kg  
Operating Temperature  
Operating Humidity  
Storage Temperature  
Storage Humidity  
50 °F to 104 °F (10 °C to 40 °C)  
10% to 80%, non-condensing  
-4 °F to 113 °F (-20 °C to 45 °C)  
5% to 95%, non-condensing  
Environmental  
Considerations  
Design and specifications are subject to change without prior notice.  
For the power supply, refer to the label attached to the product.  
Contact SAMSUNG WORLD-WIDE  
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.  
Country  
Web Site  
Address  
Customer Care Center   
Samsung Electronics Canada Inc., Customer Service  
55 Standish Court Mississauga, Ontario L5R 4B2  
Canada  
CANADA  
1-800-SAMSUNG (7267864)  
Samsung Electronique Canada Inc., Service à la Clientèle  
55 Standish Court Mississauga, Ontario L5R 4B2  
Canada  
Samsung Electronics America, Inc.  
105 Challenger Road  
U.S.A  
1-800-SAMSUNG (7267864)  
Ridgefield Park, NJ 07660-0511  
AA68-03783D-01  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Model Vehicle 60 4326 User Guide
Radio Shack Stereo Receiver STAV 3780 User Guide
RedMax Brush Cutter TR2301S User Guide
Remington Electric Shaver DA 57 User Guide
Ricoh Projector PJ S2130 User Guide
RocketFish Video Gaming Accessories RF GWII015 User Guide
Rosewill Network Card RNX N2X User Guide
Samsung Flat Panel Television UNB700 User Guide
Scientific Atlanta Stereo System Digital Home Communications Terminal User Guide
Sears Treadmill NTL610111 User Guide