Samsung CRT Television TX T2041X User Guide

Connection Panel (depending on the model)  
COLOR TELEVISION  
The product color and shape may vary depending on the  
TX-T2041X/TX-T2042X  
model.  
Rear Jack  
Side Jack  
Owner’s Instructions  
1
4
Before operating, please read this manual thoroughly,  
and retain it for future reference.  
1
Audio input  
3
2
3
Record your Model and Serial number.  
2
3
Video input  
▪ Model __________ ▪ Serial No. __________  
Headphone jack  
Whenever you connect an audio or video system to your  
television, ensure that all elements are switched off.  
Please be sure to match the color coded input terminals  
and cable jacks.  
Please be sure to match the color coded input terminals  
and cable jacks.  
When both the side and rear jacks (AV IN 2) are  
connected to external equipment, the side receives  
priority.  
Control Panel (depending on the model)  
The product color and shape may vary depending on the  
model.  
1 Audio/Video Output Jacks  
Connect to the audio/video input jacks of a recording VCR.  
1 Audio Input Jacks  
Front Panel  
2 Audio/Video Input Jacks  
Connect audio signals from a camcorder or video game.  
Connect to the audio/video output jacks of VCRs, DVD players  
and similar devices.  
2 Video Input Jack  
Connect a video signal from a camcorder or video game.  
3 Component Video Input Jacks (Y, PB, PR)  
3 Headphone Jack  
Connect to the Component video outputs of a DVD or DTV  
set-top box. 480i video signal input is available.  
When using the Component Video input, connect audio jacks  
to “AV IN 2 (AUDIO-L/R)”.  
Connect a set of external headphones to this jack for private  
listening.  
1
2
3
4
5
6
On-screen menu display  
Volume adjustment  
Channel selection  
Remote control sensor  
Indicator (Standby or Timer)  
Power on/off  
4 VHF/UHF  
Connect to an antenna or to a cable TV system.  
The 2and 3buttons also have the same function as the  
◄/►/▲/▼ buttons on the remote control.  
If the remote control no longer works or you have  
misplaced it, you can use the controls on the panel of the  
television.  
AA68-03905M-00  
English - 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup - Plug & Play  
Channel - Memorizing the Channels  
When the TV is initially powered on, several basic customer  
settings proceed automatically and subsequently.  
The following settings are available.  
Your TV can memorize and store all of the available channels  
for both air and cable channels. After the available channels  
6
When you have finished,  
press the MENU button.  
The “Enjoy your watching.” is  
displayed.  
are memorized, use the CH  
and CH  
buttons to scan  
Enjoy your watching.  
OK  
through the channels.  
1
2
3
Press the POWER button on  
the remote control.  
The “Start Plug & Play” is  
displayed. Press the ENTER  
button, then the “Language”  
is displayed.  
This eliminates the need to change channels by entering the  
channel digits. There are three steps for memorizing channels:  
“Air/Cable”, “Auto Program” and “Add/Delete”.  
Plug & Play feature  
doesn’t work in the AV  
mode.  
Plug & Play  
Start Plug & Play  
OK  
Enter  
Return  
Channel  
Air/Cable  
Air/Cable  
Auto Program  
Add/Delete  
Fine Tune  
Name  
:Air  
Before your TV can begin  
memorizing the available  
channels, you must specify  
the type of signal source  
that is connected to the TV  
(i.e., an antenna or a cable  
system).  
STD  
HRC  
IRC  
Re-setting the Plug & Play  
Method:  
MENU ▲/▼ (Setup)   
ENTER ▲/▼ (Plug & Play)  
ENTER  
Setup  
Plug & Play  
Language  
Time  
Caption  
V-Chip  
Press the ▲ or ▼ button to  
select the desired language,  
then press the ENTER  
button. The “Check antenna  
input.” is displayed.  
: English  
Plug & Play  
Language  
English  
Blue Screen  
Melody  
Demonstration  
: Off  
: On  
Move  
Enter  
Return  
Español  
Português  
Français  
Move  
Enter  
Return  
Select “Air”, “STD”, “HRC”, or “IRC” by pressing the ▲ or  
▼ button.  
Move  
Enter  
Skip  
Make sure that the antenna  
is connected to the TV.  
Press the ENTER button,  
then the “Auto Program” is  
displayed.  
Auto Program  
All available channels are  
automatically stored in  
Search  
Plug & Play  
Air 3  
Check antenna input.  
3%  
memory when channels are  
OK  
selected by the direct tuning  
Enter  
Skip  
Stop  
function.  
Enter  
Return  
Press the ENTER button  
at any time to interrupt the  
memorization process.  
Input - Source List / Edit Name  
4
5
Press the ENTER button  
to start. The TV begins  
memorizing all available  
channels. Press the ENTER  
button to stop.  
Plug & Play  
Source List  
Auto Program  
Air 3  
Source List  
You can switch between  
viewing signal from  
connected equipment, such  
as a VCR, DVD, set-top  
box, and the TV source  
(broadcast or cable).  
Add/Delete  
TV  
AV1  
AV2  
Component  
Add/Delete  
3%  
----  
----  
----  
▲ More  
2
3
You can add or delete  
a channel to display the  
channels you want only.  
To use the “Add/Delete”  
function, first run Auto  
Program.  
Select “Deleted” or “Added”  
by pressing the ▲ or ▼  
button.  
Deleted  
Added  
: Deleted  
:
Stop  
4
5
6
: Deleted  
: Deleted  
: Deleted  
Enter  
Skip  
▼ More  
Move  
Enter  
Return  
Move  
Enter  
Return  
After all available channels  
are stored, the “Clock Set” is  
displayed.  
Press the ◄ or ► button to  
move to the hour or minute.  
Set the clock by pressing the  
▲ or ▼ button.  
Press the SOURCE button on the remote control  
repeatedly to select the desired signal source.  
Plug & Play  
Clock Set -- : -- am  
Move  
Edit Name  
Edit Name  
You can give a name to the  
external source.  
Enter  
Skip  
----  
AV1  
AV2  
Component  
VCR  
DVD  
Cable STB  
Sat. STB  
AV Receiver  
DVD Receiver  
Move  
Enter  
Return  
continued...  
English - 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Channel - Fine Tune  
Setup - Time  
Setup - Caption  
Time  
The Fine Tuning function lets  
you manually adjust the TV’s  
tuner if you have difficulty tuning  
channels.  
Clock  
Setting the clock is  
necessary in order to use the  
various timer features of the  
TV. Also, you can check the  
time while watching the TV.  
(Just press the INFO button.)  
Your TV decodes and displays  
the closed captions that are  
broadcast with certain TV shows.  
These captions are usually  
subtitles for the hearing impaired  
or foreign-language translations.  
All VCRs record the closed  
Caption  
Clock  
-- : -- am  
: Off  
Caption  
Mode  
Channel  
Field  
: On  
Fine Tune  
Reset  
Sleep Timer  
On Timer  
Off Timer  
On Timer Channel  
On Timer Volume  
: Caption  
-- : -- am Off  
-- : -- am Off  
3 *  
1
: 1  
: 1  
:
:
3
10  
Adjust the fine tuning by pressing  
the ◄ or ► button.  
Move  
Adjust  
Return  
Move  
Enter  
Return  
Move  
Enter  
Return  
To store the fine tuning setting  
in the TV’s memory, press the  
MENU button.  
caption signal from TV programs,  
so home-recorded video tapes also provide closed captions.  
Most pre-recorded commercial video tapes provide closed  
captions as well. Check for the closed caption symbol in your  
TV schedule and on the tape’s packaging: CC .  
Sleep Timer  
You can select a time period of between 30 and 180  
minutes after which the TV automatically switches to  
standby mode.  
To reset the fine tuning to “0”, select ”Reset” by pressing the  
▲ or ▼ button, then press the ENTER button.  
Press the SLEEP button on the remote control  
repeatedly until the appropriate time interval appears  
(any of the preset values from “30 Min.” to “180 Min.”).  
Caption: On/Off  
You can activate or deactivate the “Caption” function.  
Mode  
On Timer / Off Timer  
You can set the On/Off timers so that the TV will switch on  
or off automatically at the time you select.  
-
In “Caption” mode, captions appear at the bottom  
of the screen, and they usually cover only a small  
portion of the picture.  
Channel - Name  
You must set the clock first.  
-
In “Text” mode, information unrelated to the program,  
such as news or weather, is displayed.  
Use this feature to assign an  
easy-to-remember label to any  
channel (i.e., “CBS”, “ESPN”,  
“PBS2”, “CNN1”, etc.).  
A label consists of four fields,  
where each field is a letter  
(A~Z), a number (0~9), a blank,  
or -. When the INFO button is  
pressed, the channel label will  
appear next to the channel number.  
Text often covers a large portion of the screen.  
Name  
On Timer Channel  
The preferred channel can be set for when the timer  
automatically turns on the TV.  
▲ More  
2
3
4
5
6
:
:
:
:
:
A
- - - -  
- - - -  
- - - -  
- - - -  
Channel / Field  
Depending on the particular broadcast, it might be  
necessary to make changes to “Channel” and “Field”.  
Different channels and fields display different information:  
Field 2 carries additional information that supplements  
the information in Field 1. (For example, Channel 1 may  
have subtitles in English, while Channel 2 has subtitles in  
Spanish.)  
▼ More  
On Timer Volume  
The preferred volume can be set for when the timer  
automatically turns on the TV.  
Move  
Adjust  
Return  
Auto Power Off  
When you set the timer “On”, the TV will eventually turn  
off, if no controls are operated for 3 hours after the TV was  
turned on by timer. This function is only available in timer  
“On” mode and prevents overheating or leakages, which  
may occur if a TV is on for too long.  
Misspellings and unusual characters sometimes occur  
during closed caption transmissions, especially those of  
live events. There may be a small delay before captions  
appear when you change channels. These are not  
malfunctions of the TV.  
English - 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
V-Chip  
Change PIN  
Setup -  
Language / Blue Screen /  
Melody / Demonstration  
The TV-Y7, TV-PG, TV-14 and TV-MA have additional  
options:  
V-Chip Lock  
TV Parental Guidelines  
MPAA Rating  
Canadian English  
Canadian French  
Change PIN  
: Off  
Choose any 4 digits for your  
PIN and enter them. As soon  
as the 4 digits are entered,  
“Confirm New Pin” screen  
appears. Re-enter the same  
4 digits. When the Confirm  
screen disappears, your Pin  
has been memorized.  
FV  
D
L
Fantasy violence  
Dialog  
Offensive language  
Sexual situation  
Violence  
Move  
Enter  
Return  
Setup  
Language  
Plug & Play  
Language  
Time  
S
When you start using the TV  
for the first time, you must  
select the language which  
will be used for displaying  
menus and indications.  
: English  
Enter New PIN  
- - - -  
V
Caption  
If you forget the PIN,  
V-Chip  
Blue Screen  
Melody  
: Off  
: On  
The V-Chip will automatically block certain categories  
that are “more restrictive.” For example, if you block  
“TV-Y” category, then “TV-Y7” will automatically be  
blocked.  
Similarly, if you block the TV-G category, then all the  
categories in the “young adult” group will be blocked  
(TV-G, TV-PG, TV-14 and TVMA).  
press the remote control  
keys in the following  
sequence, which resets  
the pin to  
Demonstration  
Move  
Enter  
Return  
Confirm New PIN  
- - - -  
Blue Screen  
Blue Screen If no signal is being received or the signal is  
very weak, a blue screen automatically replaces the noisy  
picture background. If you wish to continue viewing the  
poor picture, you must set the “Blue Screen” to “Off”.  
0-0-0-0: POWER (Off),  
MUTE, 8, 2, 4, POWER (On).  
The sub-ratings (D, L, S, V) work together similarly.  
V-Chip  
Off  
V-Chip Lock: Off/On  
You can activate or  
deactivate the V-Chip Lock  
function.  
V-Chip Lock  
TV Parental GuidelinOn
Melody  
MPAA Rating  
MPAA Rating  
MPAA Rating  
You can hear melody sound when the TV is powered on  
or off.  
Canadian English  
Canadian French  
Change PIN  
The MPAA rating system  
uses the Motion Picture  
Association of America  
(MPAA) system, and its main  
application is for movies.  
When the V-Chip lock is on,  
the TV will automatically  
G
:
:
:
:
:
:
:
U
U
U
U
U
U
U
PG  
PG-13  
R
NC-17  
X
NR  
Demonstration  
Move  
Enter  
Return  
B: Blocked  
U: Unblocked  
To become familiar with the various menus provided by  
the TV, you can view the in built demonstration.  
Each of the menu options is displayed in turn.  
When you wish to stop the demonstration, press any  
button on the remote control.  
TV Parental Guidelines  
TV Parental Guidelines  
First, set up a personal  
identification number (PIN),  
and enable the V-Chip. (See  
previous section.) Parental  
restrictions can be set up  
using either of two methods:  
The TV guidelines or the  
MPAA rating.  
Move  
Adjust  
Return  
All FV  
U
V
S
L
D
TV-Y  
TV-Y7  
:
U
U
block any programs that are coded with objectionable  
ratings (either MPAA or TV-Ratings).  
TV-G  
:
:
:
:
U
U
U
U
TV-PG  
TV-14  
TV-MA  
U
U
U
U
U
U
U
U
U
U
U
B: Blocked  
U: Unblocked  
G
General audience (no restrictions).  
Parental guidance suggested.  
Parents strongly cautioned.  
PG  
PG-13  
R
Move  
Adjust  
Return  
Restricted. Children under 17 should  
be accompanied by an adult.  
TV-Y  
Young children  
Setup - V-Chip  
NC-17  
X
No children under age 17.  
Adults only.  
TV-Y7  
Children 7 and over  
The V-Chip feature automatically locks out programming that is  
deemed inappropriate for children. The user must first enter a  
PIN (personal ID number) before any of the V-Chip restrictions  
can be set up or changed.  
TV-G  
General audience  
Parental guidance  
Viewers 14 and over  
Mature audience  
NR  
Not rated.  
TV-PG  
TV-14  
TV-MA  
The V-Chip will automatically block any category  
that is “more restrictive.” For example, if you block  
the “PG-13” category, then “R,” “NC-17,” and “X” will  
automatically be blocked also.  
The “Enter Pin” screen appear  
after entering the V-Chip menu.  
Enter your 4-digit PIN number.  
Enter PIN  
- - - -  
These categories consist of two separate groups:  
TV-Y and TV-Y7 (young children through age 7),  
and TV-G through TV-MA (everybody else). The  
restrictions for these two groups work independently:  
If a household includes very young children as well  
as young adults, the TV guidelines must be set up  
separately for each age group.  
The default PIN number for a  
new TV set is “0-0-0-0”.  
When the V-chip feature is active, channel-auto program  
features do not function.  
U.S.A Only  
continued...  
continued...  
This product is covered by the following U.S. patents  
: US4,930,158 US4,930,160  
English - 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Canadian English  
B/U  
Canadian English  
How to Reset the TV after the V-Chip Blocks a Channel  
(“Emergency Escape”)  
Blocks a Channel (“Emergency Escape”) If the TV is tuned  
to a restricted channel, the V-Chip will block it. The screen  
will go black and the following message will appear:  
“Excessive rating”.  
To resume normal viewing, tune to a different channel  
using the number buttons. Under certain conditions  
(depending on the rating of the local TV programs) the  
V-Chip might lock out all the channels. In this case, use  
the V-Chip function for an “emergency escape”:  
Press the MENU button to display the menu. Press the  
▲ or ▼ button to select the “Setup” menu and press the  
ENTER button. Press the ▲ or ▼ button to select the  
“V-Chip” menu and press the ENTER button. Enter your  
PIN number, and press the ► button to temporarily disable  
the V-Chip Lock.  
Picture -  
Mode / Custom / Color Tone /  
Digital NR  
E
U
E
Exempt  
programming  
includes...  
C
C8+  
G
PG  
14+  
18+  
U
U
U
U
U
U
news, sports,  
documentaries and  
other information  
programming, talk  
B: Blocked  
U: Unblocked  
Move  
Adjust  
Return  
Mode:  
Dynamic/Standard  
Movie/Custom  
Picture  
Mode  
Digital NR  
: Dynamic  
: Off  
shows, music videos, and variety programming.  
You can select the type  
of picture which best  
corresponds to your viewing  
requirements.  
C
Programming intended for children under age 8.  
C8+  
Programming generally considered  
acceptable for children 8 years and over to  
watch on their own.  
Move  
Enter  
Return  
G
General programming, suitable for all audiences.  
Parental Guidance.  
Contrast/Brightness/  
Sharpness/Color/Tint  
The TV has several settings  
which allow you to control  
the picture quality.  
Mode  
: Dynamic  
Mode  
Contrast  
Brightness  
Sharpness  
Color  
:
:
:
:
90  
55  
50  
45  
PG  
14+  
Programming contains themes or content which  
may not be suitable for viewers under the age  
of 14.  
Tint  
Color Tone  
Reset  
: G 50 R 50  
: Cool1  
Move  
Enter  
Return  
18+  
Adult programming.  
Color Tone: Cool2/Cool1/Normal/Warm1/Warm2  
You can change the color of the entire screen according to  
your preference.  
Canadian French  
Canadian French  
E
R.Surf Feature  
B/U  
U
Exempt  
programming  
includes...  
news, sports,  
documentaries  
and other  
information  
programming, talk shows, music videos, and  
variety programming.  
E
G
U
U
U
U
U
8 ans+  
13 ans+  
16 ans+  
18 ans+  
Reset  
This feature allows you to set  
the TV to return to a particular  
channel after a certain amount of  
time. For example, you may be  
watching a channel when  
commercials start. You can set  
the R.Surf to “5 minutes”, then  
switch channels. After minutes,  
the TV will return to the original  
channel.  
The previously adjusted picture settings will be reset to the  
factory defaults.  
B: Blocked  
U: Unblocked  
Move  
Adjust  
Return  
Digital NR  
Surf  
00: 29  
If the signal received by the TV is weak, you can activate  
this feature to reduce any static and ghosting that may  
appear on the screen.  
G
General.  
8 ans+  
Not recommended for young children.  
Press the R.SURF button repeatedly to set the timer  
in thirty second intervals, up to five minutes.  
13 ans+ Programming may not be suitable for children  
under the age of 13.  
16 ans+ Programming is not suitable for children  
under the age of 16.  
18 ans+ Programming restricted to adults.  
continued...  
English - 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound -  
Troubleshooting  
Mode / Equalizer / MTS / Auto Volume /  
Pseudo Stereo /Turbo Plus  
If the TV seems to have a problem, first try this list of possible  
problems and solutions. If none of these troubleshooting tips  
apply, then call your nearest Samsung authorized service  
center.  
The TV won’t turn on.  
Make sure the wall outlet is working.  
Make sure the TV is plugged in.  
Make sure the remote has batteries.  
Mode: Standard/Music/  
Movie/Speech/Custom  
You can select the type of  
special sound effect to be  
used when watching a given  
broadcast.  
Sound  
Mode  
Equalizer  
MTS  
Auto Volume  
Pseudo Stereo : Off  
Turbo Plus : Off  
: Custom  
Poor picture.  
Remote control malfunctions  
: Stereo  
: Off  
Try another channel.  
Adjust the antenna.  
Check all wire connections.  
Replace the remote control batteries.  
Clean the upper edge of the remote control (transmission  
window).  
Move  
Enter  
Return  
Check that the “+” and “-” ends of the batteries are  
inserted correctly.  
Check that the batteries are drained.  
Poor sound quality.  
Equalizer  
Try another channel.  
Adjust the antenna.  
The TV has several settings which allow you to control the  
sound quality.  
No picture or sound.  
If you make any changes to these settings, the sound  
mode is automatically switched to “Custom”.  
Try another channel.  
Press the SOURCE button.  
Make sure the TV is plugged in.  
Check the antenna connections.  
Make sure the MUTE button is off.  
MTS (Multi-channel Television Sound)  
Depending on the particular program being broadcast, you  
can listen to Mono, Stereo, or SAP.  
No color, wrong colors or tints.  
Press the MTS button on the remote control  
repeatedly to select “Stereo”, “Mono”, or “SAP”  
(Secondary Audio Program).  
Make sure the program is broadcast in color.  
Adjust the picture settings.  
Picture rolls vertically.  
Auto Volume  
Adjust the antenna.  
Check all wire connections.  
If you are using a VCR, check the tracking.  
Each broadcasting station has its own signal conditions,  
and so it is not easy to adjust the volume every time the  
channel is changed. This feature lets you automatically  
adjust the volume of the desired channel by lowering the  
sound output when the modulation signal is high or by  
raising the sound output when the modulation signal is  
low.  
The TV operates erratically.  
Unplug the TV for 30 seconds, then try operating it again.  
Your remote control does not operate your TV.  
Make sure the remote has batteries.  
Check that the “+” and “-” ends of the batteries are  
inserted correctly.  
Pseudo Stereo  
This feature converts a monaural sound signal into two  
identical left and right channels. Once the “Pseudo Stereo”  
is set to “On” or “Off”, the setting applies to the sound  
effects such as “Standard”, “Music”, “Movie” and “Speech”.  
Check that the batteries are drained.  
Turbo Plus  
This feature emphasizes the bass and treble frequencies  
to add fullness to the sound.  
continued...  
English - 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD Map  
Important Warranty Information  
Regarding Television Format Viewing  
Input  
– Source List  
– Edit Name  
– TV / AV1 / AV2 / Component  
– VCR / DVD / Cable STB / Sat. STB / AV Receiver / DVD Receiver / Game /  
Camcorder / DVD Combo  
Standard screen format televisions (4:3, the aspect ratio of the  
screen width to height) are primarily designed to view standard  
format full-motion video. The images displayed on them should  
primarily be in the standard 4:3 ratio format and constantly  
moving. Displaying stationary graphics and images on screen,  
such as the dark top and bottom letterbox bars (wide screen  
pictures), should be limited to no more than 15% of the total  
television viewing per week.  
Picture  
– Mode  
– Mode  
Contrast  
– Dynamic / Standard / Movie / Custom  
Brightness  
Sharpness  
Color  
Tint  
Color Tone  
Reset  
Wide screen format televisions (16:9, the aspect ratio of  
the screen width to height) are primarily designed to view  
wide screen format full-motion video. The images displayed  
on them should primarily be in the wide screen 16:9 ratio  
format, or expanded to fill the screen if your model offers this  
feature, and constantly moving. Displaying stationary graphics  
and images on screen, such as the dark side-bars on non-  
expanded standard format television video and programming,  
should be limited to no more than 15% of the total television  
viewing per week.  
– Cool2 / Cool1 / Normal / Warm1 / Warm2  
– Digital NR  
– Off / On  
Sound  
– Mode  
– Standard / Music / Movie / Speech / Custom  
– Equalizer  
– MTS  
– Auto Volume  
– Pseudo Stereo  
– Turbo Plus  
– Mono / Stereo / SAP  
– Off / On  
– Off / On  
– Off / On  
Additionally, viewing other stationary images and text such as  
stock market reports, video game displays, station logos, web  
sites or computer graphics and patterns, should be limited as  
described above for all televisions. Displaying any stationary  
images that exceed the above guidelines can cause  
uneven aging of picture tubes (CRTs) that leave subtle,  
but permanent burned-in ghost images in the television  
picture. To avoid this, vary the programming and images,  
and primarily display full screen moving images, not  
stationary patterns or dark bars. On television models that  
offer picture sizing features, use these controls to view the  
different formats as a full screen picture.  
Channel  
Setup  
– Air/Cable  
– Auto Program  
– Add/Delete  
– Fine Tune  
– Name  
– Air / STD / HRC / IRC  
– Added / Deleted  
– Plug & Play  
– Language  
– Time  
– English / Español / Português / Français  
– Clock  
– Sleep Timer  
– On Timer  
– Off Timer  
Be careful in the selection and duration of television formats  
used for viewing. Uneven CRT aging as a result of format  
selection and use, as well as other burned-in images, is not  
covered by your Samsung limited warranty.  
– On Timer Channel  
– On Timer Volume  
– Caption  
– Mode  
– Channel  
– Caption  
– V-Chip  
– Off / On  
– Caption / Text  
– 1 / 2  
– 1 / 2  
– Off / On  
– Field  
– V-Chip Lock  
– TV Parental Guidelines  
– MPAA Rating  
– Canadian English  
– Canadian French  
– Change PIN  
– Off / On  
– Blue Screen  
– Melody  
– Off / On  
– Demonstration  
English - 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Reebok Fitness Treadmill RBTL699080 User Guide
Ricoh All in One Printer 4035e DSm635 LD135 AG Aficio 2035e User Guide
Rival Rice Cooker RC161 User Guide
Roland Drums TD 8KV User Guide
Roland Electronic Keyboard GR 33B User Guide
Salton Oven FAC800TO User Guide
Samson Automobile Parts 3222 5724 User Guide
Sanyo Vacuum Cleaner SC B1211 User Guide
Sears Air Compressor 91915347 User Guide
Sears Slow Cooker 6 QUART OVAL SLOW COOKER User Guide