Samsung CRT Television CL 29Z40MQ User Guide

CL-29Z40MQ  
COLOR TELEVISION  
Owner’s  
Instructions  
Register your product at www.samsung.com/global/register  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Warranty Information  
Regarding Television Format  
Viewing  
Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are  
primarily designed to view standard format full-motion video. The images displayed on  
them should primarily be in the standard 4:3 ratio format and constantly moving.  
Displaying stationary graphics and images on screen, such as the dark top and bottom  
letterbox bars (wide screen pictures), should be limited to no more than 15% of the total  
television viewing per week.  
Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are  
primarily designed to view wide screen format full-motion video. The images displayed on  
them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the  
screen if your model offers this feature, and constantly moving. Displaying stationary  
graphics and images on screen, such as the dark side-bars on non-expanded standard  
format television video and programming, should be limited to no more than 15% of the  
total television viewing per week.  
Additionally, viewing other stationary images and text such as stock market reports, video  
game displays, station logos, web sites or computer graphics and patterns, should be  
limited as described above for all televisions. Displaying any stationary images that exceed  
the above guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle, but  
permanent burned-in ghost images in the television picture. To avoid this, vary the  
programming and images, and primarily display full screen moving images, not  
stationary patterns or dark bars. On television models that offer picture sizing features,  
use these controls to view the different formats as a full screen picture.  
Be careful in the selection and duration of television formats used for viewing. Uneven CRT  
aging as a result of format selection and use, as well as other burned-in images, is not  
covered by your Samsung limited warranty.  
© 2006 Samsung Electronics Co., Ltd. All rights reserved.  
English - 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A Guide to Digital TV  
What is Digital Television?  
Digital television (DTV) is a new way of transmitting high quality video and audio to  
your TV set. Using DTV, broadcasters can transmit high definition TV (HDTV) images,  
Dolby Digital surround audio, and new services such as multicasting (transmitting more  
than one program on the same TV channel) and datacasting (providing electronic  
program guides and interactive television). Several of these services can be combined into  
a single digital broadcast.  
Digital Television Services  
Digital Picture Quality  
DTV programs are transmitted in two different formats. The first is Standard Definition  
Television (SDTV) and the second is High Definition Television (HDTV).  
SDTV program formats include 480-line interlaced (480i) and 480-line progressive  
(480p) video. 480i programs are essentially a digital version of our current analog TV  
programs, while the 480p format offers improved image detail over 480i. Some 480p  
programs are broadcast in widescreen and are comparable to progressive-scan DVD  
movies in image quality.  
HDTV program formats include 1080-line interlaced (1080i) and 720-line progressive  
(720p). Both HDTV formats are always broadcast in widescreen, and offer much higher  
picture quality than SDTV.  
Dolby Surround Sound  
With DTV, you can listen to a variety of Dolby Digital audio formats from Dolby  
Surround 2.0 to Dolby Digital 5.1 surround, using your home audio system. Many  
HDTV programs are now broadcast with Dolby Digital 5.1 soundtracks.  
Interactive Communications and Datacasting  
DTV will allow you to interact with your television; choosing programs from a detailed  
program guide, ordering products on-line while watching TV, and accessing ancillary  
data about a program.  
English - 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to View Digital Television  
There are three ways to watch DTV. The first is to use an integrated digital TV; one with  
a built-in digital television tuner. The second is to connect an external DTV set-top  
receiver to a DTV-ready television or monitor. This type of TV or monitor will have  
wideband component video and stereo audio inputs. You can also watch DTV signals  
with personal computer (PC) tuner cards and computer monitors.  
Integrated TVs versus DTV-ready TVs and monitors  
The advantage of an integrated DTV set is that it can tune both analog and digital TV  
channels at the same time. All you need to do is add an external antenna and you are  
ready to watch DTV.  
However, integrated DTV sets are not as common as DTV-ready TVs and monitors.  
If you already own a DTV-ready TV with component video inputs, you can enjoy DTV  
broadcasts by simply adding a low-cost DTV set-top receiver and antenna.  
NOTE  
This television receiver supports the copy protection system regulated by DTLA (Digital  
Transmission Licensing Administrator). It should be noted that copy protected content may  
not be viewable depending on your particular connections.  
English - 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Q&A  
1. Is the antenna I use for existing TV reception good enough for DTV?  
Over-the-air (OTA) digital TV broadcasting uses the same channels as analog TV and  
works well with many existing TV antennas. However, DTV broadcast channel  
assignments are different than analog channels. You should find out whether your  
local DTV broadcasts are on VHF (channels 2-13) or UHF (channels 14-69) to see if  
you need a different antenna.  
If your DTV channels are on UHF and you already get good UHF reception, your  
present antenna may work fine. The same holds true for VHF DTV reception. Note  
that in some markets, both VHF and UHF channels are used for DTV broadcasts.  
You can find out the latest DTV channel assignments for your area by browsing selected  
Internet web sites such as www.titantv.com, and www.fcc.gov.  
2.How difficult is it to receive DTV signals indoors?  
This depends on whether your local DTV stations are running full power or not and  
how close your location is to the transmission tower. DTV receivers do not require as  
much signal as analog TV receivers to produce high-quality images and sound.  
Once the DTV signal level exceeds a certain threshold at the receiver, the digital video  
and audio data is decoded at the same quality it was originally encoded for broadcast.  
This is a big advantage for DTV over analog TV - there is no noise, ghosting, static, or  
scratchy audio.  
3.How can I connect an antenna in my townhouse, co-operative  
apartment, condominium, or apartment?  
The Federal Communications Commission's OTARD Rule (part of the  
Telecommunications Act of 1996) allows residents of condominiums, townhouse, or  
members of neighborhood associations to put up outside antennas for reception of  
broadcast TV signals as long as those antennas are not located in common areas and  
are no more than 12'' in height.  
Residents of rental units (apartments, etc) are not covered by the OTARD rules and  
will have to use indoor antennas to receive DTV broadcasts. It is possible that the  
landlord of an apartment complex can provide broadcast DTV signals via a master TV  
antenna system to each apartment.  
4. Can I connect my DTV set-top receiver to my cable TV service?  
Cable TV systems use a different method for transmitting digital TV programs that is  
currently incompatible with broadcast DTV set-top receivers. So you will still need to  
use an outdoor or indoor antenna to receive OTA broadcast DTV programs.  
The good news is that you won't have to pay a monthly or per-program charge to  
watch OTA DTV and HDTV programs. They're free, unlike subscription satellite TV or  
premium cable TV. All you need is an antenna and a DTV set-top receiver to enjoy  
clear, sharp widescreen images and high-quality audio.  
English - 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
Chapter 1: Your New TV ................................8  
List of Features..........................................................................................8  
Checking Accessories ................................................................................8  
Familiarizing Yourself with the TV.............................................................9  
Control Buttons..............................................................................9  
Connection Jacks (Side)................................................................10  
Connection Jacks (Rear) ...............................................................11  
Remote Control ............................................................................12  
Chapter 2: Installation................................. 13  
Connecting VHF and UHF Antennas.......................................................13  
Antennas with 300-ohm Flat Twin Leads......................................13  
Antennas with 75-ohm Round Leads............................................14  
Separate VHF and UHF Antennas.................................................14  
Connecting Cable TV ..............................................................................15  
Cable without a Cable Box ...........................................................15  
Connecting to a Cable Box that Descrambles All Channels...........15  
Connecting to a Cable Box that Descrambles Some Channels.......16  
Connecting a VCR...................................................................................17  
Connecting a Second VCR to Record from the TV ........................18  
Connecting a Camcorder.........................................................................18  
Connecting a DVD Player........................................................................19  
Connecting to Y, PB, PR.................................................................19  
Connecting to Regular Audio and Video Jacks..............................19  
Connecting to an Analog Amplifier..........................................................20  
Installing Batteries in the Remote Control................................................21  
Chapter 3: Operation....................................22  
Turning the TV On and Off .....................................................................22  
Plug & Play Feature.................................................................................22  
Viewing the Menus and On-Screen Displays............................................25  
Viewing the Menus.......................................................................25  
Viewing the Display......................................................................25  
Selecting a Menu Language......................................................................26  
Selecting the Antenna Input ....................................................................26  
Memorizing the Channels........................................................................27  
Selecting the Video Signal Source .................................................27  
Storing Channels in Memory........................................................28  
Adding and Erasing Channels..................................................................30  
Changing Channels .................................................................................31  
Using the Channel Buttons...........................................................31  
Using the Number Buttons...........................................................31  
Using the “-” Button in DTV mode...............................................31  
Using the PRE-CH Button to Select the Previous Channel ............31  
Labelling the Channels ............................................................................32  
Picture Control........................................................................................33  
Using Automatic Picture Settings..................................................33  
Customizing the Picture ...............................................................34  
Resetting the Picture Settings to the Factory Defaults....................35  
continued...  
English - 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
Chapter 3: Operation....................................36  
Sound Control.........................................................................................36  
Adjusting the Volume ...................................................................36  
Using the MUTE Button ...............................................................36  
Using Automatic Sound Settings...................................................37  
Customizing the Sound................................................................38  
Setting the Clock.....................................................................................39  
Viewing an External Signal Source...........................................................40  
Setting the Signal Source ..............................................................40  
Assigning Names to External Input Mode.....................................41  
Chapter 4: Special Features.........................42  
Fine Tuning Channels....................................................................42  
Analog  
Digital  
Checking the Digital-Signal Strength.............................................43  
Changing the Screen Size ........................................................................44  
Digital Noise Reduction...........................................................................45  
Tilt ..........................................................................................................46  
Using the R.Surf Feature..........................................................................47  
Analog  
Choosing a Multi-Channel Sound (MTS) track..............................48  
Digital  
Choosing a Multi-Channel Sound (MTS) track..............................49  
Extra Sound Settings (Auto Volume, Pseudo Stereo, or Turbo Plus).........50  
Setting the On/Off Timer.........................................................................51  
Setting the Preferred Option.........................................................52  
Setting the Sleep Timer............................................................................53  
Analog  
Viewing Closed Captions (On-Screen Text Message) .....................54  
Digital  
Viewing Closed Captions (On-Screen Text Message) .....................56  
Setting the Blue Screen Mode ..................................................................58  
Setting the On/Off Melody.......................................................................59  
Chapter 5: Troubleshooting.........................60  
Identifying Problems ...............................................................................60  
Appendix .......................................................61  
Cleaning and Maintaining Your TV..........................................................61  
Using Your TV in Another Country .........................................................61  
Specifications ..........................................................................................61  
English - 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter One  
YOUR NEW TV  
List of Features  
Your TV is designed with the latest technology. This TV is a high-performance unit that  
includes the following special features:  
• Easy-to-use remote control  
• Easy-to-use on-screen menu system  
• Automatic timer to turn the TV on and off  
• Adjustable picture and sound settings that can be stored in the TVs memory  
• Automatic channel tuning for up to 181 channels  
• A special filter to reduce or eliminate reception problems  
• A built-in multi-channel sound decoder for stereo and bilingual listening  
• Built-in, dual channel speakers  
• A special sleep timer  
• Capable of receiving Analog and Digital TV broadcasts  
Checking Accessories  
Once you have unpacked your TV, check to make sure that you have all the parts  
shown here. If any piece is missing or broken, call your dealer.  
Remote Control/  
AAA Batteries  
Owners Instructions  
Safety Guide Manual  
/
Warranty Cards/  
Registration Card  
(Not available in all locations)  
The following parts are sold separately and are available at most electronics stores.  
S-VIDEO Cable  
Video Cable  
Audio Cable  
Antenna Cable  
Component Cable  
English - 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
YOUR NEW TV  
Familiarizing Yourself with the TV  
Control Buttons  
You can control your TVs basic features, including the on-screen menu. To use the more  
advanced features, you must use the remote control. The product color and shape may  
vary depending on the model.  
Œ
´
Remote Control Sensor  
Aim the remote control towards this spot on the  
TV.  
¨
MENU  
Press to see an on-screen menu of your TV's  
features.  
Stand-By Indicator  
Lights up when you turn the power off.  
- Power Off ; Red  
ˆ
Ø
+ VOL –  
Press to increase or decrease the volume.  
Also used to select items on the on-screen menu.  
- Power On ; Off  
ˇ
POWER  
Press to turn the TV on and off.  
CH  
Press to change channels. Also press to move  
between items on the on-screen menu.  
English - 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
YOUR NEW TV  
Connection Jacks (Side)  
You can connect an A/V component that is used only occasionally, such as a camcorder or  
video game. (For information on connecting equipment, see page 18.)  
Please be sure to match the color coded input terminals and cable jacks.  
Œ
´
ˇ
S-VIDEO Input  
Connect an S-Video signal from a camcorder or video game.  
VIDEO Input  
Connect a video signal from a camcorder or video game.  
AUDIO (R/L) Input  
Connect audio signals from a camcorder or video game.  
English - 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
YOUR NEW TV  
Connection Jacks (Rear)  
Use the rear panel jacks to connect an A/V component that will be connected  
continuously, such as a VCR or a DVD player.  
For more information on connecting equipment, see pages 13~20.  
Please be sure to match the color coded input terminals and cable jacks.  
Œ
´
ˇ
¨
Audio-Video Output jacks  
Connect to the audio/video input jacks of a  
recording VCR.  
ˆ
Ø
UPGRADE PORT (USB)  
For service only.  
ANTENNA terminals  
Two independent cables or antennas can be  
connected to these terminals. Use “ANT 1 IN  
(AIR)” and “ANT 2 IN (CABLE)” terminals to  
receive a signal from VHF/UHF antennas or your  
cable system.  
Video Input jacks  
Connect to the video output jacks of VCRs, DVD  
players and similar devices.  
Audio Input jacks  
Connect to the audio output jacks of VCRs, DVD  
players and similar devices.  
Component Input jacks  
(Y, PB, PR, AUDIO-R/L)  
Connect to the Component audio and video  
outputs of a DVD or DTV set-top box. 480i video  
signal input is available.  
English - 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
YOUR NEW TV  
Remote Control  
You can use the remote control up to about 23 feet from the TV. When using the remote,  
always point it directly at the TV.  
This is a special remote control for the visually impaired, and has Braille points on the  
Power, Channel and Volume buttons.  
Œ
´
POWER  
Turns the TV on and off.  
Æ
ı
INFO  
Press to display information on the  
TV screen. (Refer to page 25)  
Number buttons  
Press to select channels directly  
on the TV.  
PRE-CH  
Tunes to the previous channel.  
(Refer to page 31)  
ˇ
¨
-
Press to select additional channels  
being broadcast by the same  
station. (Refer to page 31)  
˜
¯
˘
CH , CH  
Press to change channels.  
EXIT  
Press to exit the menu.  
VOL +, VOL  
-
Press to increase or decrease the  
volume.  
MUTE  
Press to temporarily cut off the  
sound. (Refer to page 36)  
ˆ
Ø
MENU  
Displays the main on-screen menu.  
¿
¸
P.SIZE  
Press to change the picture size.  
(Refer to page 44)  
//œ/√  
Controls the cursor in the menu.  
ENTER  
SLEEP  
While using the on-screen menus,  
press ENTER to activate (or  
change) a particular item.  
Press to select a preset time  
interval for automatic shut off.  
(Refer to page 53)  
˝
S.MODE  
Adjust the TV sound by selecting  
one of the preset factory settings  
(or select your personal,  
customized sound settings).  
(Refer to page 37)  
˛
MTS  
(Multi-channel Television Sound)  
Press to choose “Stereo”, “Mono”,  
or “SAP” (Secondary Audio  
Program). (Refer to pages 48~49)  
P.MODE  
CAPTION  
Controls the caption decoder.  
(Refer to pages 55, 57)  
Adjust the TV picture by selecting  
one of the preset factory settings  
(or select your personal,  
customized picture settings).  
(Refer to page 33)  
TURBO  
Press to select Turbo sound.  
ADD/DEL  
Press to add or erase channels in  
the TV’s memory.  
R.SURF  
Press to automatically return to a  
preferred channel after a user-  
preset time delay.  
(Refer to page 30)  
(Refer to page 47)  
Ô
AUTO PROG.  
Press to display the memorized  
channels menu. (Refer to page 29)  
ANTENNA  
Press to select “Cable” or “Air”.  
(Refer to page 26)  
Ò
Ú
TV/DTV  
Press to switch between TV  
(Analog) and DTV (Digital) mode.  
SOURCE  
Press to display all of the available  
video sources. (Refer to page 40)  
English - 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter Two  
INSTALLATION  
Connecting VHF and UHF Antennas  
If your antenna has a set of leads that look like this,  
see “Antennas with 300-ohm Flat Twin Leads”  
below.  
If your antenna has one lead that looks like this,  
see “Antennas with 75-ohm Round Leads” on page  
14.  
If you have two antennas, see “Separate VHF and  
UHF Antennas” on page 14.  
Antennas with 300-ohm Flat Twin Leads  
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has  
300-ohm twin flat leads, follow the directions below.  
1
Place the wires from the  
twin leads under the screws  
on the 300-75 ohm adapter  
(not supplied). Use a  
screwdriver to tighten the  
screws.  
2
Plug the adapter into the  
“ANT 1 IN (AIR)” terminal on  
the rear panel.  
English - 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Antennas with 75-ohm Round Leads  
1
Plug the antenna lead into  
the “ANT 1 IN (AIR)” terminal  
on the rear panel.  
Separate VHF and UHF Antennas  
If you have two separate antennas for your TV (one VHF and one UHF), you must  
combine the two antenna signals before connecting the antennas to the TV. This  
procedure requires an optional combiner-adapter (available at most electronics shops).  
1
Connect both antenna leads  
to the combiner.  
2
Plug the combiner into the  
“ANT 1 IN (AIR)” terminal on  
the rear panel.  
English - 14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Connecting Cable TV  
To connect to a cable TV system, follow the instructions below.  
Cable without a Cable Box  
1
Plug the incoming cable into  
the “ANT 2 IN (CABLE)”  
terminal on the rear panel.  
Connecting to a Cable Box that Descrambles All Channels  
œ This terminal might be labelled  
1
“ANT OUT”, “VHF OUT” or  
simply, OUT”.  
Find the cable that is  
connected to the ANTENNA  
OUT terminal on your cable  
box.  
Cable Box  
2
Connect the other end of this  
cable to the “ANT 2 IN  
(CABLE)” terminal on the  
rear panel.  
English - 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Connecting a VCR  
These instructions assume that you have already connected your TV to an air or a cable  
TV system (according to the instructions on pages 13~16).  
Please be sure to match the color coded input terminals and cable jacks.  
1
TV Rear Panel  
Connect a coaxial cable between the “ANT  
1 IN (AIR)” (or “ANT 2 IN (CABLE)”)  
terminal on the TV and the antenna out  
terminal on the VCR.  
A coaxial cable is usually included with a  
VCR. (If not, check your local electronics  
store).  
2
Connect a set of audio cables between the  
“AV IN 1 (R, L)” jacks on the TV and AUDIO  
OUT jacks on the VCR.  
If you have a mono VCR, connect L (mono)  
to VCR audio out using only one audio  
cable.  
From Cable  
2
1
Coaxial  
Cable  
Video Cable  
3
Audio Cable  
3
Connect a video cable between the “AV IN  
1 (VIDEO)” jack on the TV and the VIDEO  
OUT jack on the VCR.  
From Antenna  
Refer to your VCRs instructions for more  
information about how to view your VCR  
tape.  
VCR Rear Panel  
• Also, you can connect to “AV IN 2” on the side panel of TV.  
English - 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Connecting a Second VCR to Record from the TV  
Your TV can send out signals of its picture and sound to be recorded by a second VCR.  
To do this, connect your second VCR as follows:  
1
TV Rear Panel  
Connect a set of audio cables between the  
“AV OUT (R, L)” jacks on the TV and the AUDIO  
IN jacks on the VCR.  
(The VCR input jacks might be either on the  
front or rear of the VCR.)  
2
Connect a video cable between the “AV OUT  
(VIDEO)” jack on the TV and the VIDEO IN jack  
on the VCR.  
Audio Cable  
Refer to your VCRs instructions for more  
information about how to record using this kind  
of connection.  
From Cable  
Video Cable  
2
1
Coaxial  
Cable  
VCR Rear Panel  
From Antenna  
Connecting a Camcorder  
The side panel jacks on your TV make it easy to connect a Camcorder to your TV. They  
allow you to view the Camcorder tapes without using a VCR.  
Please be sure to match the color coded input terminals and cable jacks.  
1
Locate the A/V output jacks on the Camcorder.  
Camcorder  
TV Side Panel  
They are usually found on the side or rear of  
the Camcorder.  
S-Video Cable  
2
3
Connect a set of audio cables between the  
OR  
“AV IN 2 (R, L)” jacks on the TV and the AUDIO  
OUT jacks on the Camcorder.  
If you have mono Camcorder, connect L(mono)  
to Camcorder audio out using only one audio  
cable.  
3
Video Cable  
Audio Cable  
3
2
Connect a video or S-video cable between the  
“AV IN 2 (VIDEO)” (or “S-VIDEO”) jack on the  
TV and the VIDEO OUT jacks on the  
Camcorder.  
The audio-video cables shown here are usually included with a Camcorder. (If not, check your local  
electronics store.) If your Camcorder is stereo, you need to connect a set of two cables.  
• This figure shows the Standard connector-jack panel. The actual configuration for your TV may be  
different.  
English - 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Connecting a DVD Player  
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.  
Please be sure to match the color coded input terminals and cable jacks.  
Connecting to Y, PB, PR  
1
TV Rear Panel  
Connect a set of audio cables between the  
“COMPONENT IN (R, L)” jacks on the TV and the  
AUDIO OUT jacks on the DVD player.  
2
Connect a set of video cables between the  
“COMPONENT IN (Y, PB, PR)” jacks on the TV and  
the VIDEO OUT (Y, PB, PR) jacks on the DVD player.  
Video Cable  
2
1
Audio Cable  
DVD Player  
• Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr (Red)  
for enhanced video quality. Be sure to match the component video and audio connections. For  
example, if connecting the video cable to COMPONENT IN, connect the audio cable to  
COMPONENT IN also.  
• This product is an SD-grade DTV and must be connected in the resolution of 480i.  
If this product is connected in the resolution of 480p, 720p or 1080i, the screen may be  
displayed abnormally or may not be displayed at all.  
Connecting to Regular Audio and Video Jacks  
1
TV Rear Panel  
Connect a set of audio cables between the “AV IN 1  
(R, L)” jacks on the TV and the AUDIO OUT jacks on  
the DVD player.  
2
Connect a video cable between the “AV IN 1 (VIDEO)”  
jack on the TV and the VIDEO OUT jack on the DVD  
player.  
1
Video Cable  
Audio Cable  
2
DVD Player  
• Also, you can connect to “AV IN 2” on the side panel of TV.  
English - 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Connecting to an Analog Amplifier  
Please be sure to match the color coded input terminals and cable jacks.  
The “AV OUT (R, L)” terminals cannot be used for  
external speakers. You must hook them up to an  
TV Rear Panel  
amplifier.  
When an audio amplifier is connected to the “AV  
OUT (R, L)” terminals: Decrease the gain (volume) of  
the TV, and adjust the volume level with the  
Amplifier's volume control.  
Speaker  
Speaker  
Audio Cable  
Amplifier  
AV OUT R-AUDIO-L  
Component  
(480i)  
RF  
Analog  
AV,  
S-Video  
Digital  
Sound  
Output  
Sound  
Output  
Sound  
Output  
Mute  
• If you want to play movies by connecting DVD player with the COMPONENT IN jacks on the  
TV, connect the AUDIO OUT jacks on DVD player to an Amplifier.  
English - 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Installing Batteries in the Remote Control  
1
Lift the cover at the back of  
the remote control upward  
as shown in the figure.  
œ Make sure to match the “+” and  
2
” ends of the batteries with the  
diagram inside the compartment.  
Install two AAA size  
batteries.  
œ Remove the batteries and store  
them in a cool, dry place if you  
won’t be using the remote control  
for a long time.  
3
Close the cover as shown in  
the figure.  
The remote control can be used  
up to about 23 feet from the TV.  
(Assuming typical TV usage, the  
batteries last for about one year.)  
English - 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter Three  
OPERATION  
Turning the TV On and Off  
Press the POWER button on the remote control.  
You can also use the POWER button on the front panel.  
Plug & Play Feature  
When the TV is initially powered On, basic customer settings proceed automatically and  
subsequently: Setting the language, Antenna input check, Channel Memorize and Time  
Setting.  
The Plug & Play function operates after plugging in the TV for the first time.  
œ Plug & Play feature is available in  
1
the TV and DTV mode only.  
Press the POWER button  
on the remote control.  
Plug & Play  
œ Even if ENTER button is not  
pressed, the “Language” will be  
displayed automatically.  
Start Plug & Play  
OK  
The “Start Plug & Play” is  
displayed.  
Press the ENTER button,  
then the “Language” is  
displayed.  
Enter  
Exit  
2
Plug & Play  
Language  
Press the or button  
to select the desired  
language, then press the  
ENTER button.  
English  
Español  
Français  
The“Check antenna input.”  
is displayed.  
Move  
Enter  
Skip  
3
Make sure that the  
antenna is connected to  
the TV.  
Press the ENTER button,  
then “Antenna” is  
displayed.  
Plug & Play  
Check antenna input.  
OK  
Enter  
Skip  
continued...  
English - 22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
4
Plug & Play  
Antenna  
Press the or button  
to select the desired  
connection.  
Air  
Cable  
Air+Cable  
Press the ENTER button to  
memorize the channels of  
the selected connection.  
Move  
Enter  
Skip  
First analog, then digital  
channels will be  
memorized.  
Plug & Play  
Plug & Play  
TV Auto Program  
Air 3  
DTV Auto Program  
DTV 17  
3%  
60%  
Stop  
Enter  
Stop  
Enter  
Skip  
Skip  
When selecting Cable TV:  
Press the or button  
to select “Cable”, then  
press the ENTER button.  
“Cable System” is  
Plug & Play  
Antenna  
Air  
Cable  
Air+Cable  
displayed.  
Press the or button  
to select “STD”, “ HRC”, or  
“IRC”, then press the  
ENTER button.  
Move  
Enter  
Skip  
Plug & Play  
Plug & Play  
Cable System  
TV Auto Program  
STD 7  
Press the ENTER button to  
start.  
The TV begins memorizing  
all available channels.  
Press the ENTER button to  
stop.  
STD  
HRC  
IRC  
3%  
Stop  
Enter  
Move  
Enter  
Skip  
Skip  
After all available channels are stored, the “Clock Set” is displayed.  
• STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company  
to identify the type of cable system that exists in your particular area.  
• When Air (!), Cable (@), or Air+Cable (#) is selected on the Antenna menu in the  
Plug & Play or Auto Program menus :  
Channel Memorization  
Antenna Select  
Antenna Air:  
Antenna Air:  
Antenna Cable: Antenna Cable:  
Analog Channels DTV Channels Analog Channels DTV Channels  
O
X
O
X
X
O
O
X
X
X
Air  
!
@
#
Cable  
O
O
Air + Cable  
O : Channels can be memorized.  
X : Channels can not be memorized.  
For Example, when you want to receive the DTV Air signal, connect your antenna to the  
“ANT 1 IN (AIR)” teminal on the back of the set and select Air (!) or Air+Cable (#).  
continued...  
English - 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
œ Refer to “Setting the Clock” on  
5
page 39.  
Press the œ or button to  
move to the hour or  
minute. Set the clock by  
pressing the or ▼  
button, then press the  
MENU button.  
Plug & Play  
Clock Set  
Move  
-- : -- am  
Enter  
Skip  
œ Even if the ENTER button is not  
pressed, the message will  
automatically disappear after  
several seconds.  
6
The message “Enjoy your  
watching.” is displayed.  
When you have finished,  
press the ENTER button.  
Enjoy your watching.  
OK  
7
Setup  
If you want to reset this  
feature  
Plug & Play  
Language  
Time  
Caption  
Blue Screen  
Melody  
:
English  
(1) Press the MENU  
button.  
(2) Press the or ▼  
button to select  
:
:
On  
Off  
“Setup”, then press  
the ENTER button.  
“Plug & Play” is selected.  
(3) Press the ENTER button.  
Move  
Enter  
Return  
“Start Plug & Play” is displayed.  
English - 24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Viewing the Menus and On-Screen Displays  
Viewing the Menus  
1
Input  
With the power on, press  
Source List  
Edit Name  
: TV  
the MENU button.  
The “Input” menu  
appears on the screen.  
Its left side has five icons:  
Input, Picture, Sound,  
Channel, and Setup.  
Move  
Enter  
Exit  
Press the or button to select one of the five icons. Then  
press the ENTER button to access the icon’s sub-menu.  
œ You can also use the MENU,  
2
Input  
+
-
VOL / and CH  
/
buttons on  
Press the or button  
to move to items in the  
menu (the icon is  
selected).  
Source List  
Edit Name  
: TV  
the control panel of the TV to  
make selections.  
Press the ENTER or √  
button to enter items in  
the menu.  
Move  
Enter  
Return  
Press the //œ/√  
button to change the selected items.  
Press the MENU or œ button to return to the previous menu.  
3
Press the EXIT button to exit.  
Viewing the Display  
The display identifies the current channel and the status of certain audio-video settings.  
Alternate method:  
Press the INFO button on  
the remote control.  
The TV displays the  
current channel, the  
status of certain picture,  
sound settings and the  
current time.  
Air 10  
Mono  
Picture  
:
:
Dynamic  
Custom  
Sound  
12 : 00 am  
English - 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Selecting a Menu Language  
1
Setup  
Press the MENU button.  
Plug & Play  
Language  
Time  
Caption  
Blue Screen  
Melody  
:
English  
Press the or button  
to select “Setup”, then  
press the ENTER button.  
:
:
On  
Off  
Move  
Enter  
Return  
2
Language  
Press the or button  
to select “Language”,  
then press the ENTER  
button.  
English  
Español  
Français  
Press the or button  
to select “English”,  
“Español”, or “Français”,  
then press the ENTER  
button.  
Move  
Enter  
Return  
Press the EXIT button to  
exit.  
Selecting the Antenna Input  
You can connect to two different signal sources by choosing the antenna input  
(Air or Cable).  
Alternate method:  
Press the ANTENNA  
button repeatedly to  
select “Air” or “Cable”.  
Antenna : Air  
English - 26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Memorizing the Channels  
Your TV can memorize and store all of the available channels for both “off-air” (antenna)  
and cable channels. After the available channels are memorized, use the CH and CH  
buttons to scan through the channels. This eliminates the need to change channels by  
entering the channel digits. There are three steps for memorizing channels: selecting a  
broadcast source, memorizing the channels (automatic) and adding and deleting channels  
(manual).  
Selecting the Video Signal Source  
Before your television can begin memorizing the available channels, you must specify  
the type of signal source that is connected to the TV (i.e., an antenna or a cable  
system).  
1
Channel  
Press the MENU button.  
Antenna  
:
Air  
Auto Program  
Add/Delete  
Fine Tune  
Name  
Press the or button  
to select “Channel”, then  
press the ENTER button  
Signal Strength  
Move  
Enter  
Return  
2
Channel  
Press the ENTER button  
to select “Antenna”.  
Antenna  
:
Air  
Air  
Auto Program  
Add/Delete  
Fine Tune  
Name  
Cable  
Press the or button  
to select “Air” or “Cable”,  
then press the ENTER  
button.  
Signal Strength  
Move  
Enter  
Return  
Channel  
3
Antenna  
:
Air  
Press the or button  
to select “Auto Program”,  
then press the ENTER  
button.  
Auto Program  
Add/Delete  
Fine Tune  
Name  
Signal Strength  
Move  
Enter  
Return  
continued...  
English - 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Storing Channels in Memory  
4
Auto Program  
Press the or button  
to select the antenna  
connection, then press the  
ENTER button.  
Air  
Cable  
Air+Cable  
Move  
Enter  
Return  
First analog, then digital  
channels will be  
memorized.  
Auto Program  
Auto Program  
Air 3  
DTV 17  
3%  
60%  
Stop  
Stop  
Enter  
Return  
Enter  
Return  
When selection Cable TV:  
Press the or button  
to select “Cable”, then  
press the ENTER button.  
Press the or button  
to select “STD”, “ HRC”,  
or “IRC”, then press the  
ENTER button.  
Auto Program  
Air  
Cable  
Air+Cable  
Move  
Enter  
Return  
Press the ENTER button to  
start.  
Auto Program  
Auto Program  
The TV begins memorizing  
all available channels.  
Press the ENTER button to  
stop.  
STD 7  
STD  
HRC  
IRC  
3%  
Stop  
Move  
Enter  
Return  
Enter  
Return  
• STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company  
to identify the type of cable system that exists in your particular area.  
• When Air (!), Cable (@), or Air+Cable (#) is selected on the Antenna menu in the  
Plug & Play or Auto Program menus :  
Channel Memorization  
Antenna Select  
Antenna Air:  
Antenna Air:  
Antenna Cable: Antenna Cable:  
Analog Channels DTV Channels Analog Channels DTV Channels  
O
X
O
X
X
O
O
X
X
X
Air  
!
@
#
Cable  
O
O
Air + Cable  
O : Channels can be memorized.  
X : Channels can not be memorized.  
For Example, when you want to receive the DTV Air signal, connect your antenna to the  
“ANT 1 IN (AIR)” teminal on the back of the set and select Air (!) or Air+Cable (#).  
continued...  
English - 28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Alternate method:  
Simply press the AUTO  
PROG. button on the  
remote control to  
memorize the channels  
menu.  
Auto Program  
Auto Program  
Start  
Air  
Cable  
Air+Cable  
0%  
Enter  
Exit  
Move  
Enter  
Exit  
• All available channels are automatically stored in memory when channels are selected by  
the direct tuning function.  
• The TV must be connected to an antenna in order to receive TV signals. Even if a particular  
channel is deleted from the memory, you can always tune to that channel directly by using  
the number buttons on the remote control.  
English - 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Adding and Erasing Channels  
To add channels that were not memorized (or to delete unwanted channels from memory):  
Channel  
1
Antenna  
:
Air  
Press the MENU button.  
Auto Program  
Add/Delete  
Fine Tune  
Name  
Press the or button  
to select “Channel”, then  
press the ENTER button.  
Signal Strength  
Move  
Enter  
Return  
Add/Delete  
2
More  
Press the or button  
to select “Add/Delete”,  
then press the ENTER  
button.  
Air  
Air  
Air  
Air  
Air  
2
: Deleted  
: Deleted  
: Deleted  
: Deleted  
: Deleted  
3
4
5
6
More  
Press the or button  
to select the desired  
channel, then press the  
ENTER button.  
Move  
Enter  
Return  
Add/Delete  
3
More  
Press the or button  
to select “Deleted” or  
“Added”, then press the  
ENTER button.  
Air  
Air  
Air  
Air  
Air  
2
: Deleted  
: Added
: Deleted  
: Deleted  
: Deleted  
3
4
5
6
More  
Press the EXIT button to  
exit.  
Move  
Enter  
Return  
Alternate method:  
Simply press the ADD/DEL  
and ENTER buttons on the  
remote control to add  
channels that were not  
memorized or to delete  
unwanted channels from  
memory.  
Add/ Delete  
Delete  
Air  
3
Added  
Ch. Change  
Enter  
Exit  
English - 30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Changing Channels  
Using the Channel Buttons  
Press the CH or CH button to change channels.  
When you press CH  
or CH , the TV changes channels in sequence. You will see all the  
channels that the TV has memorized. (The TV must have memorized at least three channels.)  
You will not see channels that were either erased or not memorized.  
Using the Number Buttons  
Use the number buttons to quickly tune to any channel.  
Press the number buttons to go directly to a channel.  
For example, to select channel 27, press “2” then “7”.  
The TV will change channels when you press the second number.  
To select a channel over 100, press the “-” button. (For channel “122”, press the +100  
button, then “2”, then “2”.)  
Using the “ ” Button in DTV mode  
The “-” button is used to select channels that broadcast a digital signal.  
For example, for channel 7 (digital),  
press “7”, then “-”, then “1” and  
you will see as left.  
DTV  
7
-
1
TV #1  
English  
Using the PRE-CH Button to Select the Previous Channel  
œ To quickly switch between two  
Alternate method:  
Press the PRE-CH button.  
The TV changes to the  
last channel you were  
watching.  
channels that are far apart, tune to  
one channel, then use the number  
buttons to select the second  
channel. Then, use the PRE-CH  
button to quickly alternate  
between them.  
English - 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Labelling the Channels  
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,  
“PBS2”, “CNN1”, etc.). A label consists of four fields, where each field is a letter, a number  
or a blank. When the INFO button is pressed, the channel label will appear next to the  
channel number.  
1
Channel  
Press the MENU button.  
Antenna  
:
Air  
Auto Program  
Add/Delete  
Fine Tune  
Name  
Press the or button  
to select “Channel”, then  
press the ENTER button.  
Signal Strength  
Move  
Enter  
Return  
Name  
œ If you add or delete the TV channel,  
the corresponding label information  
will also be added or deleted.  
2
Press the or button  
to select “Name”, then  
press the ENTER button.  
More  
Air  
Air  
Air  
Air  
Air  
2
:
:
:
:
:
- - - -  
- - - -  
- - - -  
- - - -  
- - - -  
3
4
5
6
Press the or button  
to select the channel to be  
assigned to a new name,  
then press the ENTER  
button.  
More  
Move  
Enter  
Return  
3
Name  
Press the or button  
to select a letter, a number  
or a blank. (Results in this  
sequence: A...Z, 0...9,  
More  
Air  
Air  
Air  
Air  
Air  
2
A- - - -  
3
4
5
6
:
:
:
:
- - - -  
- - - -  
- - - -  
- - - -  
blank,  
,
-.)  
*
More  
Press the button to  
switch to the next field,  
which will be selected.  
Move  
Adjust  
Return  
Select a second letter or digit by pressing the or button, as  
above.  
Repeat the process to select the last two digits.  
When you have finished, press the MENU or ENTER button.  
Press the EXIT button to exit.  
English - 32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Picture Control  
You can select the type of picture which best corresponds to your viewing requirements.  
Using Automatic Picture Settings  
Your TV has automatic picture settings (“Dynamic”, “Standard”, and “Movie”) that are preset  
at the factory. You can activate either Dynamic, Standard, or Movie by making a selection  
from the menu. Or, you can select “Custom” which automatically recalls your personalized  
picture settings.  
Picture  
1
Mode  
Size  
:
:
Dynamic  
Normal  
Press the MENU button.  
Digital NR  
Tilt  
:
:
Off  
0
Press the or button  
to select “Picture”, then  
press the ENTER button.  
Move  
Enter  
Return  
Mode  
2
Press the ENTER button to  
select “Mode”.  
Press the ENTER button  
again.  
Mode  
: Dynamic  
Contrast  
Brightness  
Sharpness  
Color  
Tint  
Color Tone  
Reset  
Standard
Movie
Custom
:
:
:
50  
G 50 R 50  
Cool1  
Press the or button  
to select a particular item,  
then press the ENTER  
button.  
Move  
Enter  
Return  
Press the EXIT button to exit.  
Alternate method:  
Simply press the P.MODE  
button on the remote  
control repeatedly to  
select one of the standard  
picture settings.  
Dynamic  
Choose “Dynamic” for viewing the TV during the day or when there is bright light in  
the room.  
Choose “Standard” for the standard factory settings.  
Choose “Movie” when viewing a movie.  
Choose “Custom” if you want to adjust the settings according to personal preference.  
English - 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Customizing the Picture  
You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”,  
“Color”, “Tint”, and “Color Tone” according to personal preference.  
Picture  
1
Mode  
Size  
:
:
Dynamic  
Normal  
Press the MENU button.  
Digital NR  
Tilt  
:
:
Off  
0
Press the or button  
to select “Picture”, then  
press the ENTER button.  
Move  
Enter  
Return  
Mode  
2
Mode  
: Dynamic  
Press the ENTER button to  
select “Mode”.  
Press the ENTER button  
again.  
Contrast  
Brightness  
Sharpness  
Color  
Tint  
Color Tone  
Reset  
Standard
Movie
Custom
:
:
:
50  
G 50 R 50  
Cool1  
Press the or button  
to select a particular item  
(“Dynamic”, “Standard”,  
“Movie, or “Custom”),  
then press the ENTER  
button.  
Move  
Enter  
Return  
œ You can not adjust the “Tint” in  
DTV, AV, S-Video, or any  
component mode.  
3
Mode  
Dynamic  
Press the or button  
to select a particular item  
(“Contrast”, “Brightness”,  
“Sharpness”, “Color”, or  
“Tint”), then press the  
ENTER button.  
Mode  
:
Contrast  
Brightness  
Sharpness  
Color  
Tint  
Color Tone  
Reset  
:
:
:
:
:
:
100  
50  
75  
50  
G 50 R 50  
Cool1  
Move  
Enter  
Return  
4
Press the œ or button  
to decrease or increase  
the value of a particular  
item.  
Contrast  
100  
Press the or button  
to select other items.  
When you have finished,  
press the ENTER button.  
continued...  
English - 34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Mode  
Dynamic  
5
Mode  
:
Press the or button  
to select “Color Tone”,  
then press the ENTER  
button.  
Contrast  
Brightness  
Sharpness  
Color  
Tint  
Color Tone  
Reset  
:
:
:
:
:
:
100  
50  
Cool2
Cool1
Normal
Warm1  
Warm2  
Press the or button  
to select a particular item  
(“Cool2”, “Cool1”,  
Move  
Enter  
Return  
“Normal”, “Warm1”, or  
“Warm2”), then press the  
ENTER button.  
Resetting the Picture Settings to the Factory Defaults  
Mode  
6
Mode  
:
Dynamic  
Press the or button  
to select “Reset”, then  
press the ENTER button.  
Contrast  
Brightness  
Sharpness  
Color  
Tint  
Color Tone  
Reset  
:
:
:
:
:
:
100  
50  
75  
50  
G 50 R 50  
Cool1  
The reset function is set  
for each mode  
(“Dynamic”, “Standard”,  
“Movie”, or “Custom”).  
Move  
Enter  
Return  
The previously adjusted settings will be reset to the factory  
defaults.  
Press the EXIT button to exit.  
English - 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Sound Control  
Adjusting the Volume  
Press the VOL + or VOL - buttons to increase or decrease the  
volume.  
Using the MUTE Button  
At any time, you can temporarily cut off the sound using the MUTE button.  
1
Press the MUTE button  
and the sound cuts off.  
” is displayed.  
To turn mute off, press  
the MUTE button again,  
or press either the VOL  
+
-
or VOL button.  
English - 36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Using Automatic Sound Settings  
Your TV has automatic sound settings (“Standard”, “Music”, “Movie”, and “Speech”) that are  
preset at the factory. You can activate either Standard, Music, Movie or Speech by making a  
selection from the menu. Or, you can select “Custom,” which automatically recalls your  
personalized sound settings.  
Sound  
1
Mode  
Equalizer  
MTS  
:
:
Custom  
Press the MENU button.  
Stereo  
Press the or button  
to select “Sound”, then  
press the ENTER button.  
Auto Volume  
Pseudo Stereo  
Turbo Plus  
:
:
:
Off  
Off  
Off  
Move  
Enter  
Return  
2
Sound  
Press the ENTER button to  
select “Mode”.  
Mode  
Equalizer  
MTS  
: Standard  
Music  
: Movie
Speech
Auto Volume  
Press the or button  
to select a particular item,  
then press the ENTER  
button.  
Pseudo Stereo Custom
Turbo Plus Off  
:
Move  
Enter  
Return  
Press the EXIT button to  
exit.  
Alternate method:  
Press the S.MODE button  
on the remote control  
repeatedly to select one  
of the standard sound  
settings.  
Custom  
Choose “Standard” for the standard factory settings.  
Choose “Music” when watching music videos or concerts.  
Choose “Movie” when watching movies.  
Choose “Speech” when watching a show that is mostly dialog (i.e., news).  
Choose “Custom” to recall your personalized settings.  
English - 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Customizing the Sound  
The sound settings can be adjusted to suit your personal preferences.  
(Alternatively, you can use one of the automatic settings. See page 37.)  
Sound  
1
Mode  
Equalizer  
MTS  
:
:
Custom  
Press the MENU button.  
Stereo  
Press the or button  
to select “Sound”, then  
press the ENTER button.  
Auto Volume  
Pseudo Stereo  
Turbo Plus  
:
:
:
Off  
Off  
Off  
Move  
Enter  
Return  
2
Equalizer  
Press the or button  
to select “Equalizer”, then  
press the ENTER button.  
R
L
Press the œ or button to  
select the balance or a  
particular frequency to be  
adjusted.  
100 300 1K 3K 10K  
Adjust Return  
Move  
Press the or button to increase or  
decrease the level of the required item.  
Press the EXIT button to exit.  
If you make any changes to the equalizer settings, the sound mode is  
automatically switched to the “Custom” mode.  
“R/L” Sound Balance Adjustment  
To adjust the sound balance of the R/L speakers.  
Bandwidth Adjustment (100, 300, 1K, 3K, 10K)  
To adjust the level of different bandwidth frequencies.  
English - 38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Setting the Clock  
Setting the clock is necessary in order to use the various timer features of the TV. Also, you  
can check the time while watching the TV. (Just press the INFO button.)  
1
Setup  
Press the MENU button.  
Plug & Play  
Language  
Time  
Caption  
Blue Screen  
Melody  
:
English  
Press the or button  
to select “Setup”, then  
press the ENTER button.  
:
:
On  
Off  
Move  
Enter  
Return  
Time  
2
Clock  
Sleep Timer  
On Timer  
Off Timer  
On Timer Source  
On Timer Channel  
On Timer Volume  
--  
:
:
:
:
-- am  
Off  
Press the or button  
to select “Time”, then  
press the ENTER button.  
--  
--  
-- am Off  
-- am Off  
:
:
:
Air  
3
10  
Move  
Enter  
Return  
œ The current time will appear every  
Time  
time you press the INFO button.  
3
Clock  
12 : 00 am  
Off  
Press the ENTER button to  
select “Clock”.  
Sleep Timer  
On Timer  
Off Timer  
:
--  
--  
:
:
-- am Off  
-- am Off  
On Timer Source  
On Timer Channel  
On Timer Volume  
:
:
:
Air  
3
10  
Press the œ or button  
to move to the hour or  
minute. Set the clock by  
pressing the or ▼  
button, then press the  
ENTER button.  
Move  
Adjust  
Return  
Press the EXIT button to  
exit.  
English - 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Viewing an External Signal Source  
Use the remote control to switch between viewing signals from connected equipment,  
such as a VCR, DVD, set-top box, and the TV source (broadcast or cable).  
Setting the Signal Source  
1
Input  
Press the MENU button.  
Source List  
Edit Name  
: TV  
Press the ENTER button to  
select “Input”.  
Move  
Enter  
Return  
œ When you connect equipment to  
the TV, you can choose between  
the following sets of jacks : AV1or  
Component on the TV’s rear panel,  
and AV2 or S-Video on the TV’s  
side panel.  
2
Source List  
Press the ENTER button  
to select “Source List”.  
TV  
DTV  
AV1  
AV2  
S-Video  
Component  
----  
----  
----  
----  
Press the or button  
to select the desired  
signal source, then press  
the ENTER button.  
Move  
Enter  
Return  
œ SOURCE button :  
In TV (Analog) mode  
: TV AV1 AV2 S-Video  
Component  
Alternate method:  
Press the SOURCE button  
on the remote control  
repeatedly to select the  
desired signal source.  
In DTV (Digital) mode  
: DTV AV1 AV2 →  
S-Video Component  
AV 1  
English - 40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Assigning Names to External Input Mode  
1
Input  
Press the MENU button.  
Source List  
Edit Name  
: TV  
Press the ENTER button to  
select “Input”.  
Move  
Enter  
Return  
Input  
2
Press the or button  
to select “Edit Name”,  
then press the ENTER  
button.  
Source List  
Edit Name  
: TV  
Move  
Enter  
Return  
3
Edit Name  
Press the or button  
to select the signal source  
to be edited, then press  
the ENTER button.  
AV1  
AV2  
S-Video  
Component  
:
:
:
:
----  
----  
----  
----  
Move  
Enter  
Return  
4
Edit Name  
Press the or button  
to select the desired  
external device (VCR, DVD,  
Cable STB, Sat. STB, AV  
Receiver, DVD Receiver,  
Game, Camcorder, DVD  
Combo).  
AV1  
AV2  
S-Video  
Component  
:
:
:
:
----  
VCR  
DVD  
Cable STB  
Sat. STB  
AV Receiver  
DVD Receiver  
Move  
Enter  
Return  
Press the ENTER button.  
Press the EXIT button to  
exit.  
English - 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ChapterFour  
SPECIAL FEATURES  
Fine Tuning Channels  
Analog  
The Fine Tuning function lets you manually adjust the TVs tuner if you have difficulty  
tuning channels.  
1
Channel  
Press the MENU button.  
Antenna  
:
Air  
Auto Program  
Add/Delete  
Fine Tune  
Name  
Press the or button  
to select “Channel”, then  
press the ENTER button.  
Signal Strength  
Move  
Enter  
Return  
œ The symbol “ * ” will appear  
next to the name of the  
2
Fine Tune  
Reset  
channels you have adjusted.  
Press the or button  
to select “Fine Tune”,  
then press the ENTER  
button.  
Air 3  
0
Move  
Adjust  
Press the œ or button  
to adjust the fine tuning.  
To store the fine tuning  
setting in the TV’s  
memory, press the MENU  
button.  
Return  
Fine Tune  
Reset  
Air 3 ✽  
1
To reset the fine tuning to  
“0”, select ”Reset” by  
pressing the or ▼  
button, then press the  
ENTER button.  
Move  
Adjust  
Return  
Fine Tune  
Reset  
Press the EXIT button to  
exit.  
Air 3 ✽  
1
Move  
Enter  
Return  
English - 42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Checking the Digital-Signal Strength  
Digital  
Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital  
(HDTV) channels have either perfect reception quality or you will not receive them at all.  
So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust  
your antenna to improve the reception of available digital channels.  
1
Channel  
Press the MENU button.  
Antenna  
:
Air  
Auto Program  
Add/Delete  
Fine Tune  
Name  
Press the or button  
to select “Channel”, then  
press the ENTER button.  
Signal Strength  
Move  
Enter  
Return  
Channel  
2
Antenna  
:
Air  
Press the or button to  
select “Signal Strength”,  
then press the ENTER  
button.  
Auto Program  
Add/Delete  
Fine Tune  
Name  
Signal Strength  
If the signal strength meter  
indicates that the signal is  
weak, physically adjust  
your antenna to increase  
the signal strength.  
Move  
Enter  
Return  
Signal Strength  
Continue to adjust the  
antenna until you find the  
best position with the  
strongest signal.  
OK  
Return  
Enter  
Press the EXIT button to  
exit.  
English - 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Changing the Screen Size  
Picture  
1
Mode  
Size  
:
:
Dynamic  
Normal  
Press the MENU button.  
Digital NR  
Tilt  
:
:
Off  
0
Press the or button  
to select “Picture”, then  
press the ENTER button.  
Move  
Enter  
Return  
2
<TV Mode>  
<DTV Mode>  
Press the or button  
to select “Size”, then  
press the ENTER button.  
Picture  
Picture  
Dynamic  
Normal  
Mode  
Size  
:
:
Dynamic  
Normal  
Zoom
Mode  
Size  
:
:
Digital NR  
Tilt  
Digital NR  
Tilt  
:
0
Wide  
:
0
Press the or button  
to select the desired size,  
then press the ENTER  
button.  
Move  
Enter  
Return  
Move  
Enter  
Return  
Press the EXIT button to  
exit.  
Alternate method:  
Press the P.SIZE button on the remote control repeatedly to select  
one of the screen formats you want.  
TV Mode  
Normal  
Zoom  
DTV Mode  
Normal  
Wide  
English - 44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Digital Noise Reduction  
If the signal received by the television is weak, you can activate this feature to  
reduce any static and ghosting that may appear on the screen.  
Picture  
1
Mode  
Size  
:
:
Dynamic  
Normal  
Press the MENU button.  
Digital NR  
Tilt  
:
:
Off  
0
Press the or button  
to select “Picture”, then  
press the ENTER button.  
Move  
Enter  
Return  
2
Picture  
Press the or button  
to select “Digital NR”,  
then press the ENTER  
button.  
Mode  
Size  
Digital NR  
Tilt  
:
:
Dynamic  
Normal  
:
:
Off  
On  
Press the or button  
to select “On” or “Off”,  
then press the ENTER  
button.  
Move  
Enter  
Return  
Press the EXIT button to  
exit.  
English - 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Tilt  
Due to the Earths magnetic field there may be some minor image tilt depending  
on the TVs location. When this occurs, follow the steps below.  
Picture  
1
Mode  
Size  
:
:
Dynamic  
Normal  
Press the MENU button.  
Digital NR  
Tilt  
:
:
Off  
0
Press the or button  
to select “Picture”, then  
press the ENTER button.  
Move  
Enter  
Return  
Picture  
2
Mode  
Size  
Digital NR  
Tilt  
:
:
Dynamic  
Normal  
Press the or button  
to select “Tilt”.  
:
:
Off  
0
Move  
Adjust  
Return  
Picture  
3
Mode  
Size  
Digital NR  
Tilt  
:
:
Dynamic  
Normal  
Press the œ or button  
to adjust the Tilt.  
:
:
Off  
+2  
Press the EXIT button to  
exit.  
Move  
Adjust  
Return  
English - 46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Using the R.Surf Feature  
This feature allows you to set the TV to return to a particular channel after a certain  
amount of time. For example, you may be watching a channel when commercials start.  
You can set the R.Surf to “5 minutes”, then switch channels. After minutes, the TV will  
return to the original channel. To use the R.Surf feature:  
1
While you are watching  
the channel to which you  
want to return, press the  
R.SURF button.  
The “Surf Off” is  
displayed.  
Surf  
Off  
œ The time will start decreasing  
while you are setting up the  
timer, and will reset after 5  
minutes has passed or you turn  
it off.  
2
Press the R.SURF button  
again to set the timer in  
thirty second intervals,  
up to five minutes.  
Surf  
00: 29  
3
The time you set will begin counting down on the screen. When  
the time runs out, the TV will return to the channel you were  
watching when you set the timer.  
English - 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Choosing a Multi-Channel Sound (MTS) track  
Analog  
Depending on the particular program being broadcast, you can listen to Mono, Stereo, or  
SAP.  
Sound  
1
Mode  
Equalizer  
MTS  
:
:
Custom  
Press the MENU button.  
Stereo  
Press the or button  
to select “Sound”, then  
press the ENTER button.  
Auto Volume  
Pseudo Stereo  
Turbo Plus  
:
:
:
Off  
Off  
Off  
Move  
Enter  
Return  
2
Sound  
Press the or button  
to select “MTS”, then  
press the ENTER button.  
Mode  
Equalizer  
MTS  
:
:
Custom  
Mono
Auto Volume  
Pseudo Stereo SAP
Turbo Plus Off  
Stereo
:
Press the or button  
to select one of the  
settings, then press the  
ENTER button.  
Move  
Enter  
Return  
Press the EXIT button to  
exit.  
Alternate method:  
Press the MTS button on  
the remote control  
repeatedly to select one  
of the settings.  
MTS  
: Stereo  
Signal : Mono  
• Choose Mono” for channels that are broadcasting in mono, or if you are having difficulty  
receiving a stereo signal.  
• Choose Stereo” for channels that are broadcasting in stereo.  
• Choose SAP” to listen to the Separate Audio Program, which is usually a foreign-language  
translation.  
English - 48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Choosing a Multi-Channel Sound (MTS) track  
Digital  
The digital-TV transmission system is capable of simultaneous transmission of many audio  
tracks (for example, simultaneous translations of the program into foreign languages).  
The availability of these additional “multitracks” depends upon the program.  
Sound  
1
Mode  
Equalizer  
MTS  
:
:
Custom  
Press the MENU button.  
English  
Press the or button  
to select “Sound”, then  
press the ENTER button.  
Auto Volume  
Pseudo Stereo  
Turbo Plus  
:
:
:
Off  
Off  
Off  
Move  
Enter  
Return  
2
Sound  
Press the or button  
to select “MTS”, then  
press the ENTER button.  
Mode  
Equalizer  
MTS  
:
:
Custom  
English  
Auto Volume  
Pseudo Stereo French
Turbo Plus Off  
Spanish
:
Press the or button  
to select the language  
you want, then press the  
ENTER button.  
Move  
Enter  
Return  
Press the EXIT button to  
exit.  
Alternate method:  
Press the MTS button on  
the remote control to  
listen in a language other  
than the favorite  
language.  
2
English  
English - 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Extra Sound Settings (Auto Volume,  
Pseudo Stereo, or Turbo Plus)  
The following sound settings can be adjusted to suit your personal preferences  
• Auto Volume  
Each broadcasting station has its own signal conditions, which can make it necessary  
to adjust the volume every time the channel is changed. “Auto Volume” lets you  
automatically adjust the volume of the desired channel by lowering the sound output  
when the modulation signal is high or by raising the sound output when the  
modulation signal is low.  
• Pseudo Stereo  
“Pseudo Stereo” converts a monaural sound signal into two identical left and right  
channels. Once the “Pseudo Stereo” is set to “On” or “Off”, the setting applies to the  
sound effects such as “Standard”, “Music”, “Movie” and “Speech”.  
• Turbo Plus  
Turbo Plus” emphasizes the bass and treble frequencies to add fullness to the sound.  
Sound  
1
Mode  
Equalizer  
MTS  
:
:
Custom  
Press the MENU button.  
Stereo  
Press the or button  
to select “Sound”, then  
press the ENTER button.  
Auto Volume  
Pseudo Stereo  
Turbo Plus  
:
:
:
Off  
Off  
Off  
Move  
Enter  
Return  
2
Sound  
Press the or button  
to select the required item  
(“Auto Volume”, “Pseudo  
Stereo”, or “Turbo Plus’),  
then press the ENTER  
button.  
Mode  
Equalizer  
MTS  
Auto Volume  
Pseudo Stereo  
Turbo Plus  
:
:
Custom  
Stereo  
:
:
:
Off  
On  
Off  
Move  
Enter  
Return  
Press the or button  
to select “On” or “Off”,  
then press the ENTER  
button.  
Press the EXIT button to  
exit.  
English - 50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Setting the On/Off Timer  
1
œ You must set the clock first.  
Setup  
Press the MENU button.  
Plug & Play  
Language  
Time  
:
English  
Press the or button  
to select “Setup”, then  
press the ENTER button.  
Caption  
Blue Screen  
Melody  
:
:
On  
Off  
Move  
Enter  
Return  
œ The current time will appear  
every time you press the INFO  
button.  
Time  
2
Clock  
Sleep Timer  
On Timer  
09 : 30 am  
Off  
Press the or button  
to select “Time”, then  
press the ENTER button.  
:
--  
--  
:
:
-- am Off  
-- am Off  
Off Timer  
On Timer Source  
On Timer Channel  
On Timer Volume  
:
:
:
Air  
3
10  
Move  
Enter  
Return  
œ Auto Power Off  
Time  
When you set the timer “On”,  
the television will eventually  
turn off, if no controls are  
operated for 3 hours after the  
TV was turned on by timer.  
This function is only available  
in timer “On” mode and  
prevents overheating or  
leakages, which may occur if a  
TV is on for too long time.  
3
Clock  
09 : 30 am  
Off  
12 : 00 am Off  
-- am Off  
Press the or button  
to select “On Timer”, then  
press the ENTER button.  
Sleep Timer  
On Timer  
Off Timer  
On Timer Source  
On Timer Channel  
On Timer Volume  
:
--  
:
:
:
:
Air  
3
10  
Press the œ or button  
to move to the hour or  
minute. Set the clock by  
pressing the or ▼  
button.  
Press the œ or button  
to move to “Off”. To  
activate the “On Timer”,  
set to “On” by pressing  
the or button.  
Move  
Adjust  
Return  
Time  
Clock  
09 : 30 am  
Off  
Sleep Timer  
On Timer  
Off Timer  
On Timer Source  
On Timer Channel  
On Timer Volume  
:
06 : 30 am On  
11 : 00 pm On  
:
:
:
Air  
3
10  
Press the ENTER button.  
Move  
Enter  
Return  
Set the “Off Timer” as  
methods for “On Timer”  
setting.  
continued...  
English - 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Setting the Preferred Option  
The preferred TV source, channel and volume can be set for when the timer automatically  
turns on the TV.  
Time  
4
Clock  
09 : 30 am  
Off  
Press the or button  
to select “On Timer  
Sleep Timer  
On Timer  
Off Timer  
On Timer Source  
On Timer Channel  
On Timer Volume  
:
06 : 30 am On  
11 : 00 pm On  
Source”, then press the  
ENTER button.  
Press the or button  
to select “Air”, “Cable”, or  
“DTV”, then press the  
ENTER button.  
:
:
:
Air  
Cable  
DTV  
Move  
Enter  
Return  
œ If the Auto Program was not  
performed for both signal  
Time  
Press the or button  
to select “On Timer  
Channel” or “On Timer  
Volume”.  
Press the œ or button  
to select the desired  
channel or adjust volume  
level.  
Clock  
09 : 30 am  
Off  
06 : 30 am On  
11 : 00 pm On  
Sleep Timer  
On Timer  
Off Timer  
On Timer Source  
On Timer Channel  
On Timer Volume  
:
sources (Air and Cable), you can  
select any channel you want as  
the On Timer Channel.  
:
:
:
Air  
3
10  
Move  
Adjust  
Return  
Time  
Press the EXIT button to  
exit.  
Clock  
09 : 30 am  
Off  
06 : 30 am On  
11 : 00 pm On  
Sleep Timer  
On Timer  
Off Timer  
:
On Timer Source  
On Timer Channel  
On Timer Volume  
:
:
:
Air  
3
10  
Move  
Adjust  
Return  
English - 52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Setting the Sleep Timer  
The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes).  
1
Setup  
Press the MENU button.  
Plug & Play  
Language  
Time  
Caption  
Blue Screen  
Melody  
:
English  
Press the or button  
to select “Setup”, then  
press the ENTER button.  
:
:
On  
Off  
Move  
Enter  
Return  
Time  
2
Clock  
Sleep Timer  
On Timer  
09 : 30 am  
Off  
0
06 : 3
Press the or button  
to select “Time”, then  
press the ENTER button.  
:
Off Timer  
11 :
60  
On Timer Source  
On Timer Channel  
On Timer Volume  
90  
120  
Press the or button  
to select “Sleep Timer”,  
then press the ENTER  
button.  
150  
180  
Move  
Enter  
Return  
Press the or button to select the appropriate  
time interval, then press the ENTER button.  
Press the EXIT button to exit.  
œ After about 5 seconds, the sleep  
display will disappear from the  
screen, and the time interval  
will be set.  
Alternate method:  
Press the SLEEP button  
on the remote control  
repeatedly until the  
appropriate time interval  
appears (any of the  
preset values from “30  
Min.” to “180 Min.”).  
30 Min.  
English - 53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Viewing Closed Captions  
(On-Screen Text Message)  
Analog  
Your TV decodes and displays the closed captions that are broadcast with certain TV shows.  
These captions are usually subtitles for the hearing impaired or foreign-language  
translations. All VCRs record the closed caption signal from television programs, so home-  
recorded video tapes also provide closed captions. Most pre-recorded commercial video  
tapes provide closed captions as well. Check for the closed caption symbol in your television  
schedule and on the tapes packaging:  
.
1
Setup  
Press the MENU button.  
Plug & Play  
Language  
:
English  
Time  
Press the or button  
Caption  
to select “Setup”, then  
press the ENTER button.  
Blue Screen  
Melody  
:
:
On  
Off  
Move  
Enter  
Return  
œ Misspellings and unusual  
characters sometimes occur  
during closed caption  
Caption  
2
Caption  
Mode  
Channel  
Field  
:
Off  
Press the or button  
to select “Caption”, then  
press the ENTER button.  
:
:
:
On
transmissions, especially those of  
live events. There may be a small  
delay before captions appear  
when you change channels.  
These are not malfunctions of  
the TV.  
1
1
Press the ENTER button to  
select “Caption”.  
Move  
Enter  
Return  
Press the or button  
to select “On”, then press  
the ENTER button.  
œ In “Caption” mode, captions  
appear at the bottom of the  
screen, and they usually cover  
only a small portion of the  
picture.  
Caption  
3
Caption  
Mode  
Channel  
Field  
:
:
:
:
On  
Press the or button  
to select “Mode”, then  
press the ENTER button.  
Caption  
Text  
1
In “Text” mode, information  
unrelated to the program, such as  
news or weather, is displayed. Text  
often covers a large portion of the  
screen.  
Press the or button  
to select “Caption” or  
“Text”, then press the  
ENTER button.  
Move  
Enter  
Return  
continued...  
English - 54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
œ Different channels and fields  
display different information:  
Field 2 carries additional  
information that supplements  
the information in Field 1.  
(For example, Channel 1 may  
have subtitles in English, while  
Channel 2 has subtitles in  
Spanish.)  
Caption  
4
Caption  
Mode  
Channel  
Field  
:
:
:
:
On  
Depending on the  
particular broadcast, it  
might be necessary to  
make changes to  
“Channel” and “Field”.  
Caption  
1
2  
Move  
Enter  
Return  
Press the or button  
to select “Channel” or  
“Field, then press the  
ENTER button.  
Caption  
Caption  
Mode  
Channel  
Field  
:
:
:
:
On  
Caption  
1
1
2
Press the or button  
to select “1” or “2”, then  
press the ENTER button.  
Press the EXIT button to  
Move  
Enter  
Return  
exit.  
Alternate method:  
Press the CAPTION button  
on the remote control  
repeatedly to select “On”  
or “Off”.  
Caption : Off  
English - 55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Viewing Closed Captions  
(On-Screen Text Message)  
Digital  
The Digital Captions function operates on digital channels.  
1
Setup  
Press the MENU button.  
Plug & Play  
Language  
Time  
Caption  
Blue Screen  
Melody  
:
English  
Press the or button  
to select “Setup”, then  
press the ENTER button.  
:
:
On  
Off  
Move  
Enter  
Return  
Caption  
2
Caption  
Mode  
Option  
:
:
Off  
Press the or button  
to select “Caption”, then  
press the ENTER button.  
On
Press the ENTER button to  
select “Caption”.  
Move  
Enter  
Return  
Press the or button  
to select “On”, then press  
the ENTER button.  
Caption  
3
Default  
Caption  
Mode  
Option  
Press the or button  
to select “Mode”, then  
press the ENTER button.  
Service1  
Service2  
Service3  
Service4  
Service5  
Service6  
CC1  
Press the or button  
to select submenu  
(Service1~ Service6,  
CC1~CC4, or Text1 ~ Text4)  
you want, then press the  
ENTER button.  
Move  
Enter  
Return  
Caption  
4
Caption  
Mode  
Option  
:
:
On  
Default  
Press the or button  
to select “Option”, then  
press the ENTER button.  
Move  
Enter  
Return  
continued...  
English - 56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
œ The availability of captions  
depends on the program being  
broadcast.  
Option  
5
Size  
:Default  
Press the ENTER button to  
Font Style :Default  
Fore Color  
Back Color  
Fore Opacity  
Back Opacity  
Return to Default  
select “Size”.  
:Default  
:Default  
:Default  
:Default  
œ The “Default” means to follow  
the rule of broadcasting.  
Press the or button  
to select one you want,  
the press the ENTER  
button.  
Move  
Enter  
Return  
œ Foreground Color and Back Color  
cannot be set to same color.  
Fore Opacity and Back Opacity  
cannot be both set to  
Set other listed options  
below using the same  
method as above.  
Transparent”.  
Press the EXIT button to  
exit.  
Size  
This option consists of “Default”, “Small”, “Standard” and “Large”.  
The default is “Standard”.  
Font Style  
This option consists of “Default”, “Style0 ~ Style 7”.  
You can change the font you want. The default is “Style 0”.  
Fore Color  
This option consists of “Default”, “White”, “Black”, “Red”, “Green”,  
“Blue”, “Yellow”, “Magenta” and “Cyan”.  
You can change the color of the letter. The default is “White”.  
Back Color  
This option consists of “Default”, “White”, “Black”, “Red”, “Green”,  
“Blue”, “Yellow”, “Magenta” and “Cyan”.  
You can change the background color of the caption. The default is  
“Black”.  
Fore Opacity  
This option consists of “Default”, “Solid”, “Flashing”, “Translucent”,  
and “Transparent”.  
You can change the opacity of the letter.  
Back Opacity  
This option consists of “Default”, “Solid”, “Flashing”, “Translucent”,  
and “Transparent”.  
You can change the background opacity of the caption.  
Return to Default  
This option sets each of “Size”, “Font Style”, “Fore Color”, “Back  
Color” , “Fore Opacity”, and “Back Opacity” to its factory default.  
Alternate method:  
Press the CAPTION button  
on the remote control  
repeatedly to select “On”  
or “Off”.  
Caption : Off  
English - 57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Setting the Blue Screen Mode  
If no signal is being received or the signal is very weak, a blue screen automatically replaces  
the noisy picture background. If you wish to continue viewing the poor picture, you must  
set the “Blue Screen” mode to “Off”.  
1
Setup  
Press the MENU button.  
Plug & Play  
Language  
Time  
Caption  
Blue Screen  
Melody  
:
English  
Press the or button  
to select “Setup”, then  
press the ENTER button.  
:
:
On  
Off  
Move  
Enter  
Return  
Setup  
2
Plug & Play  
Language  
Time  
Caption  
Blue Screen  
Melody  
Press the or button  
to select “Blue Screen”,  
then press the ENTER  
button.  
: English  
:
:
Off  
On  
Press the or button  
to select “On” or “Off”,  
then press the ENTER  
button.  
Move  
Enter  
Return  
Press the EXIT button to  
exit.  
English - 58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIAL FEATURES  
Setting the On/Off Melody  
You can hear a melody sound when the TV is powered on or Off.  
1
Setup  
Press the MENU button.  
Plug & Play  
Language  
Time  
Caption  
Blue Screen  
Melody  
:
English  
Press the or button  
to select “Setup”, then  
press the ENTER button.  
:
:
On  
Off  
Move  
Enter  
Return  
Setup  
2
Plug & Play  
Language  
Time  
Caption  
Blue Screen  
Melody  
Press the or button  
to select “Melody”, then  
press the ENTER button.  
: English  
:
:
On  
Off  
On  
Press the or button  
to select “On” or “Off”,  
then press the ENTER  
button.  
Move  
Enter  
Return  
Press the EXIT button to  
exit.  
English - 59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter Five  
TROUBLESHOOTING  
If the TV seems to have a problem, first try this list of possible problems and solutions. If  
none of these troubleshooting tips apply, then call your nearest Samsung authorized  
service center.  
Identifying Problems  
Problem  
Possible Solution  
Poor picture.  
Try another channel.  
Adjust the antenna.  
Check all wire connections.  
Poor sound quality.  
No picture or sound.  
Try another channel.  
Adjust the antenna.  
Try another channel.  
Press the SOURCE button.  
Make sure the TV is plugged in.  
Check the antenna connections.  
Make sure the MUTE button is off.  
No color, wrong colors or tints.  
Picture rolls vertically.  
Make sure the program is broadcast in color.  
Adjust the picture settings.  
Adjust the antenna.  
Check all wire connections.  
If you are using a VCR, check the tracking.  
The TV operates erratically.  
Unplug the TV for 30 seconds, then try operating it  
again.  
Your remote control does not  
operate your TV.  
Press the TV/DTV button to put your remote control  
in the “TV” mode.  
Make sure the remote has batteries.  
Check that the “+” and “-” ends of the batteries are  
inserted correctly.  
Check that the batteries are drained.  
The TV won’t turn on.  
Make sure the wall outlet is working.  
Make sure the TV is plugged in.  
Make sure the remote has batteries.  
Digital broadcasting screen  
problem  
Please check the digital signal strength and input  
antenna.  
The visual qualities of digital  
channels vary.  
The visual qualities of digital channels may vary  
depending on the original production method (analog  
or digital).  
If the original production method is digital:  
High visual quality program.  
If the original production method is analog:  
The digital program displayed on the screen is  
originally an analog program which has been  
converted to digital. The visual quality is of an SD  
grade.  
Although the TV caption shows  
HD,the visual quality is not  
satisfactory.  
The HD caption that appears when switching channels  
or when pressing the Information button on the  
remote control means the selected channel is a digital  
channel. If the broadcasting station converts an  
analog signal into digital and transmits the signal, the  
visual quality may not be perfect.  
English - 60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Cleaning and Maintaining Your TV  
Please follow these guidelines to get the maximum performance from your TV.  
Placement  
• Do not place the TV near extremely hot, cold, humid or dusty places.  
• Do not place the TV near appliances with electric motors that create magnetic fields,  
such as vacuum cleaners.  
• Keep the ventilation openings clear; do not place the TV on a soft surface, such as  
cloth or paper.  
• Place the TV in a vertical position only.  
Liquids  
• Do not handle liquids near or on the TV. Liquids that spill into it can cause serious  
damage  
.
Cabinet  
• Never open the cabinet or touch the parts inside.  
• Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or  
chemicals.  
• Do not put heavy objects on top of the cabinet.  
Temperature  
• If your TV is suddenly moved from a cold to a warm place, unplug the power cord,  
and allow at least two hours for moisture that may have formed inside the unit to dry  
completely.  
Using Your TV in Another Country  
If you plan to take your TV with you to a foreign country, please be aware of the different  
television systems that are in use around the world. A TV designed for one system may  
not work properly with another system due to differences in the TV channel frequencies.  
Specifications  
Model  
CL-29Z40MQ  
29 inches  
Screen Size  
Power Supply  
Power Consumption  
Sound Output  
AC 120V 10%, 60Hz  
160 W  
7W + 7W  
796 x 421 x 593 mm  
31.3 x 16.5 x 23.3 inches  
Dimension (W x D x H)  
Weight  
42 Kg / 92.5 lbs  
English - 61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This page is intentionally  
left blank.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This page is intentionally  
left blank.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contact SAMSUNG WORLD-WIDE  
If you have any questions or comments relating to Samsung products,  
please contact the SAMSUNG customer care center.  
Country  
ARGENTINE  
Customer Care Center  
0800-333-3733  
Web Site  
BRAZIL  
0800-124-421  
CHILE  
800-726-7864 (SAMSUNG)  
0-800-507-7267  
1-800-10-7267  
COSTA RICA  
ECUADOR  
EL SALVADOR  
GUATEMALA  
JAMAICA  
800-6225  
1-800-299-0013  
1-800-234-7267  
01-800-SAMSUNG (7267864)  
800-7267  
MEXICO  
PANAMA  
PUERTO RICO  
REP. DOMINICA  
TRINIDAD & TOBAGO  
VENEZUELA  
1-800-682-3180  
1-800-751-2676  
1-800-7267-864  
1-800-100-5303  
AA68-03783B-02  
Download from Www.Somanuals.com. All Manuals Search And Download.  

QSC Audio Stereo Amplifier RMX 4050HD User Guide
RAD Data comm Network Card RIC E1 User Guide
RCA Speaker 40 5023 User Guide
RCA Washer YWSR4100VAA User Guide
Roberts Radio Clock Radio CR9901 User Guide
Roberts Radio Portable Radio Classic DAB User Guide
Samsung Computer Monitor 172x User Guide
Samsung Digital Camera WB2014F User Guide
Samsung Printer ML 5000A User Guide
Samsung Projector SP P310ME User Guide