Samsung Blu ray Player BD E5300 ZA User Guide

BD-E5300

™

Blu-ray Disc Player

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

ENGLISH

AK68-02162A-00

Download from Www.Somanuals.com. All Manuals Search And Download.

12. Use only with the

This product satisfies CE regulations when

shielded cables and connectors are used

to connect the unit to other equipment.

To prevent electromagnetic interference

with electric appliances, such as radios

and televisions, use shielded cables and

Blu-ray Discs

Precautions

cart, stand, tripod,

bracket, or table

• Do not leave a Blu-ray Disc in the player for

long periods of time. Remove the Blu-ray

Disc from the player and store it in its case.

• Be careful not to scratch or leave

fingerprints on the surface of the Blu-ray

Disc.

specified by the

Important Safety Instructions

manufacturer,

or sold with the

Read these operating instructions carefully

before using the unit. Follow all the safety

instructions listed below.

apparatus. When a

connectors for connections

cart is used, use caution when moving

the cart/apparatus combination to avoid

injury from tip-over.

IMPORTANT NOTE

Keep these operating instructions handy for

future reference.

DVD-VIDEO, Audio CD (CD-DA)

The mains lead on this equipment is supplied

with a moulded plug incorporating a fuse. The

value of the fuse is indicated on the pin face

of the plug.

13. Unplug this apparatus during lightning

storms or when unused for long periods

of time.

1. Read these instructions.

• Wipe off dirt or contamination on the disc

2. Keep these instructions.

with a soft cloth.

3. Heed all warnings.

14. Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

If it requires replacing, a fuse approved to

BS1362 of the same rating must be used.

Never use the plug with the fuse cover

omitted if the cover is detachable. If a

replacement fuse cover is required, it must be

of the same colour as the pin face of the plug.

Replacement covers are available from your

dealer.

4. Follow all instructions.

Disc Storage

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the

way, such as when power-supply cord or Be careful not to damage the disc because

plug is damaged, liquid has been spilled

the data on these discs is highly vulnerable to

or objects have fallen into the apparatus, the environment.

the apparatus has been exposed to rain

or moisture, does not operate normally,

or has been dropped.

• Do not keep under direct sunlight.

• Keep in a cool ventilated area.

• Store vertically.

manufacturer’s instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or

other apparatus (including AV receivers)

that produce heat.

If the fitted plug is not suitable for the power

points in your house or the cable is not long

enough to reach a power point, you should

obtain a suitable safety approved extension

lead or consult your dealer for assistance.

However, if there is no alternative to cutting

off the plug, remove the fuse and then safely

dispose of the plug. Do not connect the plug

to a mains jack, as there is a risk of shock

hazard from the bared flexible cord.

• Keep in a clean, protective jacket.

• If you move your player suddenly from a

cold place to a warm place, condensation

may occur on the operating parts and lens

and cause abnormal disc playback. If this

occurs, unplug the player, wait for two

hours, and then connect the plug to the

power outlet. Then, insert the disc, and try

to play back again.

Disc Storage & Management

Disc Handling

9. Do not defeat the safety purpose of

the polarized or grounding-type plug.

A polarized plug has two blades with

one wider than the other. A grounding

type plug has two blades and a third

grounding prong. The wide blade or

the third prong are provided for your

safety. If the provided plug does not fit

into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being

walked on or pinched particularly at

plugs, convenience receptacles, and the

point where they exit from the apparatus.

11. Only use attachments/accessories

specified by the manufacturer.

Disc Shape

• Use discs with

To disconnect the apparatus from the mains,

the plug must be pulled out from the mains

socket, therefore the mains plug shall be

readily operable.

regular shapes. If you

use an irregular disc

Handling Cautions

(a disc with a special

• Do not write on the printed side with a ball-

shape), you can damage the player.

point pen or pencil.

The product unit accompanying this user

manual is licensed under certain intellectual

property rights of certain third parties.

• Do not use record cleaning sprays or

antistatic sprays to clean discs. Also,

do not use volatile chemicals, such as

benzene or thinner.

Holding discs

• Avoid touching the surface

of a disc where data has

been recorded.

• Do not apply labels or stickers to discs.

(Do not use discs fixed with exposed tape

adhesive or leftover peeled-off stickers.)

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Do not use scratch-proof protectors or covers.

Do not use discs printed with label printers

available on the market.

•

If you encounter an abnormal noise, burning

smell or smoke, turn off the power switch

immediately and disconnect the power plug

from the wall outlet. Then, contact the nearest

customer center for technical assistance. If you

still use the product as it is, this may cause an

electric shock or fire.

Contents

•

Do not load warped or cracked discs.

Before connecting other components to this

player, be sure to turn them off.

Network ....................................................16

System......................................................17

Language ..................................................17

Security.....................................................17

General......................................................18

Support.....................................................18

KEY FEATURES

Blu-ray Disc Features...................................2

•

Do not move the player while it is playing a disc.

The disc can be scratched or damaged and the

player’s internal parts can be damaged.

Do not put a flower vase filled with water or any

small metal objects on the player.

Blu-ray Disc Player Features........................2

Maintenance of Cabinet

SAFETY INFORMATION

•

Before you clean the Blu-ray Disc’s cabinet,

be sure to disconnect the AC power cord

from the AC outlet.

Warning.......................................................2

Precautions .................................................3

Disc Storage & Management.......................3

•

Be careful not to put your hand into the disc slot.

Do not place anything other than the disc in the

disc slot.

BASIC FUNCTIONS

• Do not use benzene, thinner, or other

solvents for cleaning.

Playing a Video..............................................19

Using the Disc Menu/Title Menu/

•

Interference from exterior sources such as

lightening and static electricity can affect the

normal operation of this player. If this occurs,

turn the player off and on again with the POWER

button, or disconnect and then reconnect the AC

power cord to the AC power outlet. The player

will operate normally.

GETTING STARTED

• Wipe the cabinet with a soft cloth.

Before using the User Manual......................5

Accessories.................................................7

Front Panel..................................................8

Rear Panel...................................................8

Remote Control...........................................9

Popup Menu..................................................19

Using the Search and Skip Functions ............19

Slow Motion Play/Step Motion Play ...............20

Using the TOOLS button ...............................20

Listening to Music..........................................21

Playing back Pictures ....................................22

Playing back a USB Storage Device ..............22

Restrictions on Playback

• This player may not respond to all operating

commands because some Blu-ray Disc,

DVD, and CD discs allow specific or limited

operation and provide only certain features

during playback.

•

Be sure to remove the disc and turn off the

player after use.

Disconnect the AC power cord from the AC

outlet when you don’t intend to use the player for

long periods of time.

CONNECTIONS

Please note that this is not a defect in the

player.

A. Connecting to a TV .................................9

B. Connecting to an Audio System............10

C. Connecting to a Network ......................10

• Samsung cannot guarantee that this player

will play every disc bearing the Blu-ray

Disc, DVD or CD logo because disc

formats evolve, and problems and errors

may occur during the creation of Blu-ray

Disc, DVD, and CD software and/or the

manufacture of discs.

•

To clean a disc, wipe it in a

NETWORK SERVICES

straight line from the inside to the

BD-LIVE™.................................................23

Using the AllShare Function.......................23

outside of the disc.

•

Do not expose the player to any

SETUP

liquid.

When the AC plug is connected to a wall outlet,

the player will still draw power (standby mode)

when it is turned off.

The Initial Settings Procedure.....................12

Menu Navigation........................................12

Accessing the Settings Menu ....................12

Display ......................................................13

Audio.........................................................14

APPENDIX

Please contact the SAMSUNG customer

care center if you have questions or

encounter difficulty in playing Blu-ray Disc,

DVD, or CD discs in this player. Also, refer

to rest of this user manual for additional

information on playback restrictions.

Troubleshooting.........................................23

•

Apparatus shall not be exposed to dripping or

splashing and no objects filled with liquids, such

as vases, shall be placed on the apparatus.

The main plug is used as a disconnect device

and shall stay readily operable at any time.

Do not touch the power plug with a wet hand.

Otherwise, it can cause an electric shock.

Do not share one power socket with multiple

electric devices. Otherwise, it may cause an

overheat, resulting in a fire.

Specifications............................................24

•

Download from Www.Somanuals.com. All Manuals Search And Download.

Disc types your player cannot play

Getting Started

•

HD DVD

•

DVD-RAM

•

DVD-RW(VR mode)

•

3.9 GB DVD-R Disc for

Authoring.

DVD-ROM/PD/MV-

Disc, etc

Super Audio CD

(except CD layer)

CVD/CD-ROM/CDV/

CD-G/CD-I/LD

Before using the User Manual

(CD-Gs play audio only,

not graphics.)

Disc Types and Contents your player can play

NOTE

✎

Logo

Icon

Blu-ray Disc Compatibility

Content

Definition

▪

Some commercial discs and DVDs discs purchased

outside your region may not play on this player.

Blu-ray Disc is a new and evolving format.

Accordingly, disc compatibility issues are

possible. Not all discs are compatible and

not every disc will play back. For additional

information, refer to the Compliance and

Compatibility Notice section of this user manual.

Indicates a function available on a BD-ROM or BD-RE/-R disc

▪ Playback may not work for some types of discs,

or when you use specific operations, such as

angle change and aspect ratio adjustment.

Information about the discs is written in detail on

the disc box. Please refer to this if necessary.

▪ Do not allow the disc to become dirty or

scratched. Fingerprints, dirt, dust, scratches or

deposits of cigarette smoke on the recording

surface may make it impossible to use the disc

for playback.

recorded in the BD-RE format.

Disc Types

BD-ROM

Indicates a function available on a DVD-VIDEO or recorded

DVD+RW/DVD-RW(V)/DVD-R/+R discs that have been recorded

and finalized.

�

VIDEO

Blu-ray ROM discs can only be played back.

This player can play back pre-recorded

commercial BD-ROM discs.

▪ When you play a BD-J title, loading may take

longer than a normal title or some functions may

perform slowly.

Indicates a function available on a CD-RW/-R, DVD-RW/-R, BD-

RE/-R disc or in a USB storage media containing DivX, MKV, MP4

contents.

BD-RE/-R

�

▪ This player may not respond to all operating

commands because some Blu-ray Disc, DVD, and

CD discs allow specific or limited operation and

provide only certain features during playback.

Please note that this is not a defect in the player.

Blu-ray RE/-R discs can be recorded on and

Indicates a function available on an audio CD-RW/-R (CD-DA

format).

played back.

This player can play back a BD-RE/-R disc

recorded by other compatible Blu-ray Disc

recorders.

MUSIC

Indicates a function available on a CD-RW/-R, DVD-RW/-R, BD-

RE/-R disc or in a USB storage media containing MP3 or WMA

contents.

▪

Samsung cannot guarantee that this player will

play every disc bearing the Blu-ray Disc, DVD

or CD logo because disc formats evolve, and

problems and errors may occur during the creation

of Blu-ray Disc, DVD, and CD software and/or the

manufacture of discs.

Indicates a function available on a CD-RW/-R, DVD-RW/-R, BD-

RE/-R disc or in a USB storage media containing JPEG contents.

DVD-VIDEO

PHOTO

• This player can play back pre-recorded

commercial DVDs (DVD-VIDEO discs) with

movies.

NOTE

✎

▪ The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.

▪ If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.

▪ Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.

▪ Your player will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds

30 Mbps.

Please contact the SAMSUNG customer care

center if you have questions or encounter difficulty

when playing Blu-ray Disc, DVD, or CD discs in

this player. Also, refer to rest of this user manual

for additional information on playback restrictions.

• When switching from the first layer to the

second layer of a dual-layered DVD-VIDEO

disc, there may be momentary distortion

in the image and sound. This is not a

malfunction of the player.

Download from Www.Somanuals.com. All Manuals Search And Download.

• Your player supports the FAT16, FAT32,

DVD-RW/-R/+R

Region Code

and NTFS files systems.

This player can play back a DVD-RW/-R/+R

disc recorded and finalized with a DVD video

recorder. The ability to play back may depend

on recording conditions.

Both players and discs are coded by region.

These regional codes must match for a disc

to play. If the codes do not match, the disc

will not play.

• Connect USB devices directly to the

player’s USB port. Connecting through

a USB cable may cause compatibility

problems.

user’s manual may be reproduced or copied

without the prior written permission of

Samsung Electronics Co.,Ltd.

The Region Code for this player is displayed

on the rear panel of the player.

• Inserting more than one memory device

into a multi-card reader may cause the

reader to operate improperly.

DVD+RW

Supported File Formats

• This player can play back a DVD+RW

disc recorded with a DVD Video recorder.

The ability to play back may depend on

recording conditions.

Region

• The player does not support the PTP

Disc Type

Area

Code

protocol.

Notes on the USB connection

• Do not disconnect a USB device during a

North America, Central

“loading” process.

America, South America,

Korea, Japan, Taiwan, Hong

Kong and South East Asia.

• Your player supports USB storage media,

MP3 players, digital cameras, and USB

card readers.

• The bigger the image resolution, the longer

Audio CD (CD-DA)

the image takes to display.

•

This player cannot play MP3 files with DRM

(Digital Rights Management) downloaded

from commercial sites.

• This player can play back CD-DA format

audio CD-RW/-R discs.

• The player does not support folder or file

Blu-ray

Disc

Europe, Greenland, French

territories, Middle East, Africa,

Australia and New Zealand.

names longer than 128 characters.

• The player may not be able to play some

CD-RW/-R discs due to the condition of

the recording.

• Some USB/External HDD/digital camera

devices may not be compatible with the

player.

• Your player only supports the video that is

under 30fps (frame rate).

India, China, Russia, Central

and South Asia.

CD-RW/-R

Video File Support

File Extension

The U.S., U.S. territories and

Canada

Europe, Japan, the Middle

East, Egypt, South Africa,

Greenland

• Use a 700MB (80 minute) CD-RW/-R disc.

If possible, do not use an 800MB (90

minute) or larger disc, as the disc may not

play back.

Container

Video Codec

DivX 3.11/4.x/5.1/6.0

XviD

Audio Codec

Resolution

1920x1080

MP3

AC3

• If the CD-RW/-R disc was not recorded

as a closed session, you may experience

delays when playing back the beginning of

the disc or all recorded files may not play.

• Some CD-RW/-R discs may not play on

this player, depending on the device which

was used to burn them. For contents

recorded on CD-RW/-R media from CDs

for your personal use, playability may vary

depending on the contents and discs.

*.avi

DTS

AVI

MP4v3

WMA

PCM

Taiwan, Korea, the Philippines,

Indonesia, Hong Kong

H.264 BP/MP/HP

VC-1 AP

DivX 5.1/6.0

XviD

H.264 BP/MP/HP

VC-1 AP

Mexico, South America,

Central America, Australia,

New Zealand, Pacific Islands,

Caribbean

Russia, Eastern Europe, India,

most of Africa, North Korea,

Mongolia

DVD-VIDEO

MP3

AC3

DTS

*.mkv

*.wmv

MKV

NOTE

✎

WMA

WMV (wmv9)

VC-1 SM

▪

Some DivX, MKV and MP4 format discs may

not play, depending on the video resolution and

frame rate condition.

China

Download from Www.Somanuals.com. All Manuals Search And Download.

Logos of Discs the player can play

File Extension

Container

Video Codec

MP4 (mp4v)

H.264 BP/MP/HP

MPEG1

MPEG2

H.264 BP/MP/HP

Audio Codec

Resolution

1920x1080

*.mp4

AAC

MP4

MP1, 2

AC3

*.mpg

Blu-ray Disc

DTS-HD Master Audio

DivX

BD-LIVE

*.mpeg

DTS

• Limitations

- Even when the file is encoded by a supported codec mentioned above, a file might not be

played if its content has a problem.

PAL broadcast System in

U.K., France, Germany, etc

- Normal playback is not guaranteed if the file’s container information is wrong or the file itself is

corrupted.

Dolby TrueHD

Java

- Files having higher Bit rate/frame rate than standard may stutter during sound/video

playback.

- The Seek (skip) function is not available if the file’s index table is damaged.

Accessories

Check for the supplied accessories shown below.

• Video decoder

- Supports up to H.264 Level 4.1

- Does not support H.264 FMO/ASO/RS, VC1 SP/MP/AP L4 and AVCHD

- XVID, MPEG4 SP, ASP :

Below 1280 x 720 : 60 frames max

Above 1280 x 720 : 30 frames max

- Does not support GMC 2 or higher

• Audio decoder

Batteries for Remote Control (AAA Size)

User Manual

- Supports WMA 7, 8, 9 and STD

- Does not support WMA 9 PRO multi-channel if number of channels is more than 2 or lossless

audio decoding

- Does not support WMA sampling rate of 22050Hz mono.

Music File Support

Remote Control

File Extension

Container

MP3

Audio Codec

Support Range

*.mp3

MP3

Compliant with WMA version 10

*.wma

WMA

Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48

Bit rates - All bit-rates from 5kbps to 384kbps

WMA

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Panel

Front Panel

a b

Use for network based services, BD-LIVE, and software upgrades using

a network connection.

LAN

DISC TRAY

Opens to accept a disc.

REMOTE CONTROL

Detects signals from the remote control.

Using an HDMI cable, connect this HDMI output terminal to the HDMI

input terminal on your TV for the best quality picture or to your AV

receiver for the best quality sound.

SENSOR

HDMI OUT

DISPLAY

OPEN/CLOSE BUTTON

POWER BUTTON

Displays the playing status, time, etc.

Opens and closes the disc tray.

Turns the player on and off.

DIGITAL AUDIO OUT

Connects to an AV receiver.

You can connect a USB memory flash stick here and use it as storage

when the player is connected to BD-LIVE. You can also use the USB Host

for software upgrades and MP3/JPEG/DivX/MKV/MP4 playback.

USB HOST

PLAY/PAUSE BUTTON

NOTE

Plays a disc or pauses playback.

✎

▪ You can perform software upgrades using the USB Host jack with a USB flash memory stick only.

▪ When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button on

the player or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then

press the ENTER button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

Connections

A. Connecting to a TV

Tour of the Remote Control

SOURCE

^SAMSUP^NO^GWER

Connecting to a TV with an HDMI Cable - Best Quality

POWER

Turn the player on and off.

Press to eject a disc.

Turn the TV on and off.

(Recommended)

After setup, allows you to set the input

VOL-

VOL+

source on your TV.

TV volume adjustment.

1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the

HDMI IN terminal of your TV. See page 11.

2. Turn on the player and TV.

Press numeric buttons to operate options.

3. Press the input selector on your TV remote control until the HDMI signal from the player

appears on your TV screen.

DISC MENU

AUDIO

^TIP^TLO^EPUP

Use to enter the disc menu.

NOTE

✎

Use to enter the popup menu/title menu.

Press to search a disc backwards or

▪

An HDMI cable outputs digital video/audio, so you don’t need to connect an audio cable.

Press to skip backwards or forwards.

forwards.

If the player is connected to your TV in the HDMI 720p, 1080i, or 1080p output mode, you must use a High

speed (category 2) HDMI cable.

Press to stop a disc.

Press to play a disc.

Press to pause a disc.

Press to move to the home menu.

HOME

SUBTITLE

Press to switch the Blu-ray Disc/DVD’s

▪

HDMI outputs only a pure digital signal to the TV.

Use to access various audio functions on a

subtitle language.

disc (Blu-ray Disc/DVD).

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the

screen.

Use to display the playback information

when playing a Blu-ray Disc/DVDs.

Press to use Tools menu.

▪

Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of

your TV.

Use to select menu items and change menu

value.

When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI

output resolution will be automatically set to the highest supported by the TV.

Press to exit the menu.

Return to the previous menu.

These buttons are used both for menus on the

player and also several Blu-ray Disc functions.

▪

A long HDMI cable may cause screen noise. If this occurs, set Deep Color to Off in the menu.

REPEAT

FULL

BONUS VIEW

REPEAT

A->B

SCREEN

Press to use the bonusview function.

Allows you to repeat A-B disc

Press to see the full screen on a TV.

If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio

Out to an audio sytem to hear audio.

Allows you to repeat a title, chapter, track

or disc.

Installing batteries

NOTE

✎

▪ If the remote does not operate properly:

• Check the polarity (+/–) of the batteries.

• Check if the batteries are drained.

• Check if the remote sensor is blocked by obstacles.

• Check if there is any fluorescent lighting nearby.

CAUTION

▪ Dispose of batteries according to local environmental

regulations. Do not put them in the household trash.

Download from Www.Somanuals.com. All Manuals Search And Download.

B. Connecting to an Audio System

C. Connecting to a Network

This player lets you use network based services such as BD-LIVE, and download software

upgrades when it is connected to a network. We recommend using a Broadband modem (with

integrated router) or IP router for the connection. For more information on router connections,

refer to the user manual of the router or contact the router manufacturer for technical assistance.

Cable Network

•

Please turn the volume down when you turn on the AV receiver. A sudden loud sound

may cause damage to the speakers and your ears.

•

Please set the audio format according to the capabilities of your AV receiver.

The position of HDMI input terminals may vary depending on your AV receiver. Please

refer to the user manual of your AV receiver.

1. Using a Direct LAN (UTP) CAT 5 cable, connect the LAN terminal of the player to the LAN

Case 1 : Connecting to an Audio System (HDMI supported AV

receiver) - Best Quality (Recommended)

terminal of your modem or router. See page 11

2. Set the network options. See page 16.

NOTE

✎

1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the

▪

Internet access to Samsung’s software update server may not be allowed, depending on the router you use

or your ISP’s policy. For more information, contact your ISP (Internet Service Provider).

HDMI IN terminal of your AV receiver. See page 11.

2. Using an HDMI cable, connect the HDMI OUT terminal of the AV receiver to the HDMI IN

terminal of your TV.

▪

DSL users, please use a router to make a network connection.

To use the AllShare function, you must connect your PC to your network as shown in the figure.

The connection can be wired.

3. Turn on the player, TV, and AV receiver.

4. Using the input select button of the AV receiver and TV, select the correct HDMI input or

each to hear sound and see video from the player. Refer to your AV receiver’s user manual

to set the AV receiver’s audio input.

Case 2 : Connecting to an Audio System (AV receiver with Dolby

Digital or DTS decoder) - Better Quality

1. Using a coaxial cable, connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of

the player to the DIGITAL AUDIO IN (COAXIAL) terminal of your AV receiver. See page 11.

2. Using an HDMI cable, connect the HDMI terminal on the rear of the player to the HDMI

terminal of your TV.

3. Turn on the player, TV, and AV receiver.

4. Press the input select button of the AV receiver to select the correct external input and hear

sound from the player. Refer to your AV receiver’s user manual to set the AV receiver’s audio

input.

5. Press the input selector on your TV remote control to select the HDMI video source.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to an Audio System

Connecting to a TV

Case 1 : HDMI cable

(not included)

HDMI cable

(not included)

Case 1 : HDMI cable

(not included)

Network

Case 2 : Coaxial cable

(not included)

Router

Broadband modem (with

integrated router)

service

Broadband modem

Broadband

service

Broadband

Networking with PC for AllShare function

NOTE : You can only connect this unit to a network via a wired connection.

✎

Download from Www.Somanuals.com. All Manuals Search And Download.

Selects Videos.

Selects YouTube.

Selects Photos.

Selects Music.

Selects Settings.

Menu Navigation

Setup

7. The “Initial settings completed.” message

appears, and then the Home screen

appears.

The Initial Settings Procedure

AUDIO

HOME

SUBTITLE

1. Turn on your TV after connecting the

- If you Blu-ray player does not connect to your

network or you want to connect manually, go to

Network Setup on page 16.

player.

When you turn on the player for the first

time, the player displays the Language

screen.

NOTE

✎

Displays the buttons you can use on the

▪

The Home menu will not appear if you do not

configure the initial settings except as noted

below.

remote to access functions.

Initial Settings I On-Screen Language

Select a language for the on-screen displays.

▪

If you press the BLUE (D) button during network

setup, you can access the Home menu even if

the network setup is not completed yet.

When you return to the Home menu, the full

screen mode is cancelled automatically.

If you want to display the Initial Setting screen again

HOME Button : Press to move to the Home

English

Accessing the Settings Menu

Français

Deutsch

Español

Italiano

menu.

To access the Settings menu and sub-menus,

RETURN Button : Return to the previous

▪

follow these steps:

Nederlands

menu.

1. Press the POWER button.

Move

Select

ENTER / DIRECTION Button :

Move the cursor or select an item.

Activate the currently selected item.

Confirm a setting.

The Home Menu appears.

to make changes, press the PLAY/PAUSE (

)

2. Press the ◄► buttons to select Settings,

and then press the ENTER button.

3. Press the ▲▼ buttons to select the

desired submenu, and then press the

ENTER button.

button on the front panel of the player for more than

5 seconds with no disc inserted. This resets the

player to its default settings.

2. Use the ▲▼ buttons on the remote to

select the desired language, and then

press the ENTER button.

▪

If you use an HDMI cable to connect the player

to an Anynet+(HDMI-CEC)-compliant Samsung

TV and 1.) You have set the Anynet+(HDMI-

CEC) feature set to On in both the TV and

the player and 2.) You have set the TV to a

language supported by the player, the player will

select that language as the preferred language

automatically.

EXIT Button : Press to exit the current

3. Press the ENTER button to select Start.

menu.

4. Press the ▲▼ buttons to select the desired

item, and then press the ENTER button.

5. Press the EXIT button to exit the menu.

4. Use the ▲▼ buttons to select an Aspect

Ratio, and then press the ENTER button.

• Home Menu

5. Select Auto, and then press the ENTER

button. If you do not have a home

network, press the BLUE (D) button on

your remote. You will go directly to the

Home menu.

NOTE

✎

▪

The access steps may differ depending on the

menu you selected. The OSD (On Screen Display)

may change in this player after you upgrade the

software version.

If you leave the player in the stop mode for more

than 5 minutes without using it, a screen saver

will appear on your TV. If the player is left in the

screen saver mode for more than 25 minutes,

the power will automatically turn off.

YouTube

6. The Blu-ray player automatically verifies

your wired network. When verification

in complete, the screen displays “Your

network is operating properly.” Press the

ENTER button.

Videos

No Disc

Change Device

View Devices

Enter

Download from Www.Somanuals.com. All Manuals Search And Download.

• 1080p : Outputs 1080 lines of progressive

• 720p : Outputs 720 lines of progressive

video.

BD Wise (Samsung Players only)

Display

video.

BD Wise is Samsung’s latest inter-connectivity • 1080i : Outputs 1080 lines of interlaced

• 576p/480p : Outputs 576/480 lines of

You can configure various display options

feature.

video.

progressive video.

such as the TV Aspect Ratio, Resolution, etc.

When you connect a Samsung player and a

Samsung TV with BD Wise to each other via

HDMI, and BD Wise is on in both the player and

TV, the player outputs video at the video resolution

and frame rate of the Blu-ray Disc/DVDs.

• Off : The output resolution stays fixed at

the resolution you set previously in the

Resolution menu, regardless of the resolution

of the disc.

TV Aspect Ratio

Resolution according to the output mode

Depending on the type of television you have,

you may want to adjust the screen size setting.

• Blu-ray Disc/E-contents/Digital Contents playback

HDMI / connected

HDMI Mode

• 16:9 Original : Select when you connect

the player to a 16:9 TV screen. The player

will display all content in its original aspect

ratio.

Output

Setup

Blu-ray Disc

Resolution of Blu-ray Disc

Max. Resolution of TV input

1080p

E-contents/Digital contents

1080p

Max. Resolution of TV input

1080p

• On : The player outputs video at the original

resolution and frame rate of the Blu-ray

Disc/DVDs.

Content formatted in 4:3 will be displayed

with black bars on the left and right.

• 16:9 Full : Select when you connect the

player to a 16:9 TV screen. All content will

fill the full screen. Content formatted in 4:3

will be stretched.

BD Wise

Auto

NOTE

✎

1080p

▪

When BD Wise is on, the Resolution setting

automatically defaults to BD Wise and BD Wise

appears in the Resolution menu.

Movie Frame : Auto

1080p@24F

• 4:3 Letter Box : Select when you connect

the player to a 4:3 TV screen. The player will

display all content in its original aspect ratio.

Content formatted in 16:9 will be displayed

with black bars on the top and bottom.

(24Fs)

If the player is connected to a device that does

not support BD Wise, you can not use the BD

Wise function.

1080i

720p

576p/480p

576i/480i

1080i

720p

576p/480p

1080i

720p

576p/480p

For proper operation of BD Wise, set the BD Wise

• 4:3 Pan-Scan : Select when you connect

the player to a 4:3 TV screen. 16:9 content

will have the extreme left and right portions

cut off.

menu of both the player and the TV to On.

Resolution

• DVD playback

Lets you set the output resolution of the HDMI

video signal to Auto, 1080p, 1080i, 720p or

576p/480p. The number indicates the number

of lines of video per frame. The i and p indicate

interlaced and progressive scan, respectively.

The more lines, the higher the quality.

NOTE

✎

HDMI / connected

HDMI Mode

576p/480p

Max. Resolution of TV input

Output

▪

Depending on the disc type, some aspect ratios

may not be available.

Setup

▪

If you select an aspect ratio and option which is

different than the aspect ratio of your TV screen,

then the picture might appear to be distorted.

If you select the 4:3 Pan-Scan or 4:3 Letter

Box, pressing the FULL SCREEN button on the

remote will not bring up a full screen picture.

If you select the 16:9 Original, your TV may

display 4:3 Pillarbox (black bars on sides of

picture). If this occurs, pressing the FULL

SCREEN button on the remote will not bring up

a full screen picture.

BD Wise

Auto

• Auto : Automatically sets the output

resolution to the connected TV’s maximum

resolution.

▪

1080p

1080i

720p

576p/480p

• BD Wise : Automatically sets the resolution

to the resolution of the Blu-ray Disc/DVDs

if you have connected the player via HDMI

to a TV with the BD Wise feature. (The BD

Wise menu item appears only if BD Wise is

set to On. See BD Wise above.)

1080i

720p

576p/480p

576i/480i

Download from Www.Somanuals.com. All Manuals Search And Download.

NOTE

✎

• Bitstream (Unprocessed) : Choose if you

want your receiver to decode all the audio.

Bonusview audio will not be available.

HDMI Color Format

Audio

▪

If the TV you connected to the player does not

support Movie Frame or the resolution you

selected, the message “If no pictures are shown

after selecting ‘Yes’, please wait for 15 seconds

to return to the previous resolution. Do you want

to change the resolution?” appears. If you select

Yes, the TV’s screen will go blank for 15 seconds,

and then the resolution will revert to the previous

resolution automatically.

Lets you set the color space format for

HDMI output to match the capabilities of the

connected device (TV, monitor, etc).

Digital Output

• Bitstream (Re-encoded DTS) : The

original audio will be re-encoded into DTS.

Set the Digital Output to match the capabilities

of the AV receiver you’ve connected to the

player :

• Bitstream (Re-encoded Dolby D) : The

original audio will be re-encoded into Dolby

Digital

• Auto : Automatically sets the player to the

optimum format supported by your device.

• YCbCr (4:4:4) : If your TV supports the

YCbCr color space via HDMI, select this to

output the normal YCbCr color gamut.

• PCM : This is the default setting. It is

For more details, please refer to the digital

compatible with most TVs and receivers.

output selection table.

▪

If the screen stays blank after you have changed

the resolution, remove all discs, and then press and

Digital Output Selection

• RGB (Standard) : Select to output the

normal RGB color gamut.

hold the PLAY/PAUSE

(

)

button on the front of

the player for more than 5 seconds. All settings are

restored to the factory default. Follow the steps on

the previous page to access each mode and select

the Display Setup that your TV will support.

• RGB (Enhanced) : If you have connected

the player to a DVI display device such as a

monitor, select this to output the enhanced

RGB color gamut.

Bitstream

(Re-encoded

DTS)

Bitstream

(Re-encoded

Dolby D)

Bitstream

Setting

PCM

(Unprocessed)

▪

When the factory default settings are restored, all

stored user BD data is deleted.

HDMI

AV receiver

HDMI supported

supported

HDMI Deep Color

supported

Connection

Coaxial

AV receiver or

Coaxial

The Blu-ray Disc must have the 24 frame feature

for the player to use the Movie Frame (24Fs) mode.

AV receiver or

Coaxial

receiver

Lets you output video from the HDMI OUT jack with

Deep Color. Deep Color provides more accurate

color reproduction with greater color depth.

• Auto : The player outputs video with Deep

Color to a connected TV which supports

HDMI Deep Color.

Up to PCM

Re-encoded

Movie Frame (24Fs)

PCM

PCM 2ch

PCM

PCM 2ch DTS re-encoded

7.1ch

Dolby Digital *

Setting the Movie Frame (24Fs) feature to Auto

allows you to adjust the player’s HDMI output to

24 frames per second for improved picture quality.

You can enjoy the Movie Frame (24Fs) feature

only on a TV supporting this frame rate.

You can select Movie Frame only when the

player is in the HDMI 1080i or 1080p output

resolution modes.

Re-encoded

Dolby Digital PCM 2ch

PCM 2ch Dolby Digital Dolby Digital DTS re-encoded

Dolby Digital

Dolby Digital *

The picture is output without Deep Color.

^•Pr^Oo^fg^{f :}ressive Mode

Dolby Digital

PCM 2ch

Plus

Re-encoded

PCM 2ch

Dolby Digital DTS re-encoded

Plus

Dolby Digital *

Audio

Stream on

Blu-ray

Disc

Re-encoded

Dolby TrueHD PCM 2ch

PCM 2ch Dolby TrueHD Dolby Digital DTS re-encoded

Lets you improve picture quality when viewing DVDs.

• Auto : Select to have the player

Dolby Digital *

• Auto : Movie Frame (24Fs) functions work.

Re-encoded

automatically select the best picture quality

for the DVD you’re watching.

DTS

PCM 2ch

DTS

DTS re-encoded

• Off : Movie Frame (24Fs) functions are off.

Dolby Digital *

• Video : Select for the best picture quality

from concert or TV show DVDs.

Re-encoded

DTS-HD HRA PCM 2ch

DTS-HD MA PCM 2ch

PCM 2ch DTS-HD HRA

PCM 2ch DTS-HD MA

Dolby Digital *

Re-encoded

DTS

Dolby Digital *

PCM

PCM 2ch

Dolby Digital

DTS

PCM 2ch

Dolby Digital

DTS

Audio

Stream on Dolby Digital PCM 2ch

PCM 2ch Dolby Digital Dolby Digital

PCM 2ch DTS DTS

DVD

DTS

PCM 2ch

Download from Www.Somanuals.com. All Manuals Search And Download.

Dynamic Range Control

PCM Downsampling

Bitstream

(Re-encoded

DTS)

Bitstream

(Re-encoded

Dolby D)

Bitstream

Setup

PCM

(Unprocessed)

You can listen at low volumes, but still hear

dialog clearly.

Lets you set 48kHz and 96kHz PCM down-

sampling on or off.

HDMI

This is only active if your player detects a

HDMI

AV receiver

HDMI supported

• Off : Select when the AV receiver

connected to the player is 96kHz

compatible.

supported

Connection

Coaxial

Dolby Digital signal.

AV receiver or

Coaxial

AV receiver or

Coaxial

receiver

• Auto : The Dynamic Range Control will be

set automatically based on the information

provided by the Dolby TrueHD Soundtrack.

• Off : You can enjoy the movie with the

standard Dynamic Range.

• On : Select when the AV receiver

connected to the player is not 96kHz

compatible. 96kHz signals will be down

converted to 48kHz.

Decodes the main

feature audio

Decodes the main

feature audio

and BONUSVIEW

audio stream

Outputs only the main

and BONUSVIEW

Decodes the main feature feature audio stream so that audio stream

audio and BONUSVIEW your AV receiver can decode together into PCM

together into PCM

audio and adds

Navigation Sound

Effects, then re-

encodes the PCM

audio into Dolby

digital bitstream

or PCM.

Definition

• On : When Movie soundtracks are played

at low volume or through smaller speakers,

the system can apply appropriate

NOTE

✎

for Blu-ray

Disc

Any

audio stream together

into PCM audio and adds

Navigation Sound Effects.

the audio bitstream.

You will not hear

audio and adds

Navigation Sound

Effects, then re-

▪

Even when PCM Downsampling is set to Off,

BONUSVIEW audio or

some discs will only output downsampled audio

Navigation Sound Effects. encodes the PCM

compression to make low-level content

more intelligible and prevent dramatic

passages from getting too loud.

through the coaxial digital outputs.

audio into DTS

bitstream.

HDMI

* If the Source Stream is 2ch, “Re-encoded Dolby D” Setting is not applied. Output will be

• If your TV is not compatible with

compressed multi-channel formats (Dolby

Digital, DTS), the player may output PCM

2ch downmixed audio even though you

selected Bitstream (either Re-encoded or

Unprocessed) in the setup menu.

LPCM 2ch.

Downmixing Mode

Blu-ray Discs may include three audio

▪

If the HDMI device (AV receiver, TV) is not

compatible with compressed formats (Dolby

digital, DTS), the audio signal outputs as PCM.

Regular DVDs do not have BONUSVIEW audio

and Navigation Sound Effects.

Lets you select how the player will downmix

multi-channel audio into fewer channels.

streams :

Main Feature Audio : The audio soundtrack

• Normal Stereo : Downmixes the multi-

channel audio into two channel stereo.

Choose when connected to equipment that

does not support virtual surround functions

such as Dolby Pro Logic.

▪

of the main feature.

• If your TV is not compatible with PCM

sampling rates over 48kHz, the player may

output 48kHz downsampled PCM audio

even though you set PCM Downsampling

to Off.

BONUSVIEW audio : An additional

soundtrack such as the director or actor’s

commentary.

Some Blu-ray Discs do not have BONUSVIEW

audio and Navigation Sound Effects.

This Digital Output setup does not affect the

HDMI audio output to your TV. It affects the

coaxial and HDMI audio output when your player

is connected to an AV receiver.

Navigation Sound Effects : When you

choose a menu navigation selection, a

Navigation Sound Effect may sound.

Navigation Sound Effects are different on

each Blu-ray Disc.

• Surround Compatible : Downmixes multi-

channel audio into surround compatible

stereo. Choose when connected to

equipment that supports virtual surround

functions such as Dolby Pro Logic.

▪

If you play MPEG audio soundtracks, the audio

signal outputs as PCM regardless of your Digital

Output selections (PCM or Bitstream).

NOTE

✎

▪

Be sure to select the correct Digital Output or

you will hear no sound or just loud noise.

Download from Www.Somanuals.com. All Manuals Search And Download.

5. The Auto Function acquires and fills in the

values for IP Address, Subnet Mask,

etc., automatically.

12. Enter the numbers as above.

13. Press the RETURN button on your

remote.

ƒ Windows 7

Network

1. Click the Network icon on the bottom right

of the Windows desktop.

Please contact your ISP to find out if your IP

address is static or dynamic. If it is dynamic

we recommend using the Auto setting. This is

easiest and will work in the majority of cases.

If it is static, you must use the manual set up

procedure.

14. Run a Network Test to ensure the player

has connected to your network.

2. In the pop-up menu, click Network and

NOTE

✎

Sharing Center.

▪

This process can take up to five minutes.

3. On the dialog that appears, click the Local

Area Connection or Wireless Network

Connection depending on your network

connection.

6. After the Network Function has acquired

the network values, press the RETURN

button.

Network Test

Use this menu item to connect to the wired

network or check whether your network

connection is working or not.

Directions for wired networks are below.

4. On the Support tab, click the Details

button. The Network settings are

displayed.

7. Select Network Test, and then press

ENTER to ensure the player has connected

to your network.

NOTE

✎

▪

This unit can only be connected to a Network via

a wired connection.

To enter the Network Settings into your

8. When the Network Test is complete, press

the RETURN twice to return to the Main

Menu.

Network Status

player, follow these steps:

1. In the Home menu, press the ◄►

buttons to select Settings, and then

press the ENTER button.

Use to check whether a connection to

the network and the Internet have been

established.

Automatic Network Setup

9. If the Network Function does not acquire

the network values, go to the directions for

Manual Setup.

1. In the Home menu, press the ◄► buttons

to select Settings, and then press the

ENTER button.

2. Press the ▲▼ buttons to select Network,

and then press the ENTER button.

3. Press the ▲▼ buttons to select Wired

Network Settings, and then press the

ENTER button. The Wired Network

Settings screen appears.

BD-LIVE Internet Connection

2. Press the ▲▼ buttons to select Network,

and then press the ENTER button.

3. Press the ▲▼ buttons to select Wired

Network Settings, and then press the

ENTER button.

Manual Network Setup

Set to allow or prohibit an Internet connection

when you use the BD-LIVE service.

Before you start manual network setup, you

need the network setting values.

4. Select the Internet Protocol Setup field,

and then press the ENTER button.

5. Press the ▲▼ buttons to select Manual,

and then press the ENTER button.

6. Press the ▼ button to go to the first entry

field (IP Address).

• Allow (All) : The Internet connection is

To get the Network setting values through

most Windows computers, follow these

steps:

allowed for all BD-LIVE contents.

• Allow (Valid Only) : The Internet

connection is allowed only for BD-LIVE

contents containing a valid certificate.

• Prohibit : No Internet connection is allowed

for any BD-LIVE content.

Settings

Wired Network Settings

Display

Internet Protocol Setup

IP Address

Auto

Audio

ƒ Windows XP

Network

System

Subnet Mask

7. Use the number buttons on your remote

1. Right click the Network icon on the bottom

Gateway

Language

to enter numbers.

right of the Windows desktop.

SecurityDNS

Auto

General DNS Server

Support

8. When done with each field, use the ►

button to move to the next field. You can

also use the other arrow buttons to move

up, down, and back.

2. In the pop-up menu, click Status.

NOTE

✎

Move

Select

Return

3. On the dialog that appears, click the

▪

What is a valid certificate?

Support tab.

When the player uses BD-LIVE to send the disc data

and a request to the server to certify the disc, the

server uses the transmitted data to check if the disc

is valid and sends the certificate back to the player.

The Internet connection may be restricted while

you are using BD-LIVE contents.

4. On the Support tab, click the Details

button. The Network settings are

displayed.

4. In the Internet Protocol Setup field, select

Auto if it is not selected. (Press ENTER

select AUTO, and then press ENTER.)

9. Enter the IP Address, Subnet Mask,

and Gateway values in the same way.

10. Press the ▼ button to go to DNS.

11. Press the ▼ button to go to the first DNS

entry field.

▪

Download from Www.Somanuals.com. All Manuals Search And Download.

BD Data Management

DVD Parental Rating

System

Language

Enables you to manage the downloaded

contents you accessed through a Blu-ray disc

that supports the BD-LIVE service and stored

on a flash drive.

This function works in conjunction with DVDs

that have been assigned an age rating or

numeric rating that indicates the maturity

level of the content. These numbers help you

control the types of DVDs that your family can

watch.

You can select the language you prefer for the

Initial Settings

Home menu, disc menu, etc.

• On-Screen Menu : Select the language for

the on-screen displays.

By using the Initial Settings function, you can

set the language, Network Settings, etc.

For more information about the Initial Settings

function, refer to the Initial Settings section of

this user manual (page 12).

You can check the device’s information

• Disc Menu : Select the language for the

disc menu displays.

including the storage size, delete the BD

Select the rating level you want to set.

For example, if you select Level 6, discs rated

above 6 - Level 7 and 8 - will not play.

A larger number indicates more mature

content.

data, or change the Flash memory device.

• Audio : Select the language for disc audio.

BD Data Management Screen Information :

• Total Size : Total memory size of the device.

• Available Size : Available memory in the

device.

• Subtitle : Select the language for disc subtitles.

NOTE

✎

Anynet+(HDMI-CEC)

▪

The selected language will only appear if it is

supported on the disc.

Anynet+ is a convenient function that offers linked

operations with other Samsung players that have

the Anynet+ feature.

YouTube Lock

NOTE

✎

Restrict the use of the YouTube service unless

a password is entered.

▪

In the external memory mode, disc playback

may be stopped if you disconnect the USB

device in the middle of playback.

Security

To operate this function, connect this player to an

Anynet+ Samsung TV with an HDMI cable.

With Anynet+ on, you can operate this player

using a Samsung TV remote control and start

disc playback simply by pressing the PLAY

• Off : Turn Off YouTube lock.

When you access this function for the first time,

the password setup screen appears. Enter a

desired 4-digit password using the number

buttons. (The default password is 0000.)

• On : Turn On YouTube lock.

▪

Only those USB devices formatted in FAT file

format (DOS 8.3 volume label) are supported.

We recommend you use USB devices that

support USB 2.0 protocol with 4 MB/sec or

faster read/write speed.

Change PIN

(

) button on the TV’s remote control.

Change the 4-digit password used to access

security functions.

For more information, please see the TV user

BD Parental Rating

manual.

▪

The Resume Play function may not work after

you format the storage device.

Prevent playback of Blu-ray Discs with specific

age ratings unless a password is entered.

If you forgot your password

• Off : Anynet+ functions will not work.

• On : Anynet+ functions will work.

The total memory available to BD Data

Management may differ, depending on the

conditions.

1. Remove any discs.

• Off : BD Parental Rating is not active and

2. Press and hold the PLAY/PAUSE

(

)

NOTE

✎

all Blu-ray discs will play in full.

button on the front panel for 5 seconds or

▪

This function is not available if the HDMI cable

does not support CEC.

• On : This will prohibit playback of Blu-ray

disc rated above Parental Rating.

more.

All settings will revert to the factory settings.

If your Samsung TV has an Anynet+ logo,

then it supports the Anynet+ function.

Depending on your TV, certain HDMI output

resolutions may not work.

DivX® Video On Demand

NOTE

✎

View DivX® VOD Registration Codes to

purchase and play DivX® VOD contents.

▪

When the factory default settings are restored,

all the user stored BD data will be deleted.

Please refer to the user manual of your TV.

Download from Www.Somanuals.com. All Manuals Search And Download.

▪

Never turn the player off or back on manually

during the update process.

Auto Upgrade Notification

Contact Samsung

General

If you have connected the player to your

network, and then set Auto Upgrade

Notification on, the player automatically

notifies you when a new software version is

available for the player.

Samsung Electronics shall take no legal

responsibility for player malfunction caused by

an unstable Internet connection or consumer

negligence during a software upgrade.

If you want to cancel the upgrade while the

upgrade software is downloading, press the

ENTER button.

Provides contact information for assistance

with your player.

Time Zone

You can specify the time zone that is

applicable to your area.

▪

To set Auto Upgrade Notification on, follow

these steps:

View the general disclaimer regarding third

party contents and services.

1. Select Auto Upgrade Notification, and

then press the ENTER button.

Support

By USB

2. Use the ▲▼ buttons to select On, and then

press the ENTER button.

Reset

To upgrade by USB, follow these steps:

Software Upgrade

1. Visit www.samsung.com/bluraysupport.

2. Download the latest USB software

upgrade zip archive to your computer.

3. Unzip the zip archive to your computer.

You should have a single RUF file with the

same name as the zip file.

If there is a new software version available,

the player notifies you with a popup message.

All settings will revert to the default except for

the network settings.

The Software Upgrade menu allows you to

upgrade the player’s software for performance

improvements or additional services.

1. To upgrade the firmware, select Yes on the

Pop-up. The player turns off automatically,

then restarts, and begins the download.

(Never turn on the player manually here.)

2. The update progress popup appears.

3. When the update is complete, the player

turns off again automatically.

By Online

4. Copy the RUF file to a USB flash drive.

5. Make sure there is no disc in the player,

and then insert the USB flash drive into the

USB port of the player.

To upgrade By Online, follow these steps:

1. Select By Online, and then press the

ENTER button. The Connecting to Server

message appears.

4. Press the POWER button to turn on the

6. In the player’s menu, go to Settings >

Support > Software Upgrade.

player.

2. A popup message will appear if an update

7. Select By USB.

NOTE

✎

is available.

3. If you select Yes, the player will turn off

automatically before restarting.

(Never turn the player on during an

upgrade.)

NOTE

✎

▪

Update is complete when the player turns off

after restarting. Press the POWER button to turn

on the updated player for your use.

▪

No disc should be inserted in the product when

you upgrade the software using the USB Host

jack.

Never turn the player off or on manually during

the update process.

4. The update progress popup will appear.

When the update is completed, the player

will turn back off automatically.

5. Press the POWER button to turn on the

player.

▪

When the software upgrade is done, check the

software details in the software Upgrade menu.

Do not turn off the player during the software

upgrade. It may cause the player to malfunction.

Software upgrades using the USB Host jack

must be performed with a USB flash memory

stick only.

▪

Samsung Electronics shall take no legal

responsibility for player malfunction caused by

an unstable Internet connection or consumer

negligence during software upgrade.

NOTE

✎

▪

The Update is complete when the player turns

off after restarting. Press the POWER button to

turn on the updated player for your use.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Title Menu

Using the Search and Skip Functions

Basic Functions

During play, you can search quickly through a

chapter or track, and use the skip function to

jump to the next selection.

Playing a Video

title 1

title 2

chapter 1 chapter 2 chapter 1 chapter 2 chapter 3

^TIP^TLO^EP^MU^EP^NU

1. During playback, press the TITLE

MENU button on the remote control.

Playback

Searching for a Desired Scene

hzZ��

2. Press the ▲▼◄► buttons to make the

desired selection, then press the ENTER

button.

1. Press the OPEN/CLOSE

(

)

button to

• Audio CD (CD-DA)

open the disc tray.

2. Place a disc gently into the tray with the

NOTE

✎

•

During playback, press the SEARCH (

)

track 1

track 2

track 3

track 4

track 5

file 3

disc’s label facing up.

▪

Depending on the disc, the menu items may

button.

3. Press the OPEN/CLOSE (

) button to

differ or this menu may not be available.

Each time you press the SEARCH (

)

close the disc tray.

button, the playback speed will change as follows:

4. Press the PLAY (

) button.

Playing the Title List

• MP3, WMA, DivX, MKV and MP4

BD-ROM,

)

1 

)

2  ) 3 

Playback related buttons

BD-RE/-R,

DVD-RW/-R,

DVD+RW/+R,

DVD-VIDEO

) 4  ) 5  ) 6  ) 7

folder (group) 1

folder (group) 2

file 1 file 2

file 1

file 2

(

1 

(

2  ( 3 

Starts playback.

Stops playback.

PLAY (

)

DISC MENU

1. During playback, press the DISC

MENU or TITLE MENU button.

2. Press the ▲▼ buttons to select

an entry you want to play from

the Title List, and then press the

ENTER button.

( 4  ( 5  ( 6  ( 7

)

(

1 

)

(

2 

)

(

^TIP^TLO^EP^MU^EP^NU

DivX, MKV,

•

If you press the button once : The

stop position is memorized.

MP4

1 

2 

STOP (

)

If you press the button twice : The

Using the Disc Menu/Title Menu/

Popup Menu

• To return to normal speed playback, press

stop position is not memorized.

NOTE

✎

the PLAY (

) button.

Pauses playback.

PAUSE (

)

▪

If your disc has a playlist, press the GREEN (B)

NOTE

✎

Using the Disc Menu

button to go to the playlist.

▪

The player does not play sound in search mode.

NOTE

✎

Using the Popup Menu

▪

For some discs, pressing the STOP (

)

button

DISC MENU

Skipping Chapters

once may not memorize the stop position.

1. During playback, press the DISC

▪

Video files with high bit rates of 20Mbps or

more strain the player’s capabilities and may

stop playing during playback.

MENU button on the remote

hzZ��

^TIP^TLO^EP^MU^EP^NU

1. During playback, press the POPUP

MENU button on the remote control.

2. Press the ▲▼◄► buttons or ENTER

button to select the desired menu.

control.

• During playback, press the SKIP (

)

2. Press the ▲▼◄► buttons to make

a selection, and then press the

ENTER button.

button.

If you press the SKIP (

) button, the

Disc Structure

disc moves to the next chapter.

NOTE

✎

The content of discs are usually divided as

shown below.

If you press the SKIP (

) button, the

NOTE

✎

▪

Depending on the disc, the menu items may

disc moves to the beginning of the chapter.

One more press makes the disc move to

the beginning of the previous chapter.

▪

Depending on the disc, the menu items may

differ or this menu may not be available.

• Blu-ray Disc, DVD-VIDEO

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Press the ENTER button at the point

where you want repeat play to stop (B).

5. To return to normal play, press the

REPEAT button again.

▪

Some Blu-ray Discs may allow you to select

either the PCM or Dolby digital audio soundtrack

in English.

Moving to a Desired Scene

Directly

Slow Motion Play/Step Motion Play

Slow Motion Play

If you press the AUDIO button on the remote

control, the Audio bar appears.

6. Press the ▲▼ buttons to select Off, and

hzZ�

Sele^Pc^ret^sin^{s t}g^het^Rh^ETe^URS^Nu^bub^ttotⁿit^tl^oe^remL^oa^ven^tg^heu^Aa^udg^ioe^bar.

hZ�

then press the ENTER button.

1. During playback, press the TOOLS button.

2. Press the ▲▼ buttons to select Title,

Chapter or Playing Time.

hzZ��

NOTE

✎

• In pause mode, press the SEARCH (

)

▪

If you set point (B) less than 5 seconds of

playing time after point (A), a prohibition

message appears.

button.

3. Press the ◄► or number button to select

the desired Title, Chapter or Playing Time,

then press the ENTER button.

Each time you press the SEARCH (

)

button, the playback speed will change as

▪

Depending on the disc, the menu items may

differ and this menu may not be available.

follows:

1/8

1/4

1/2

SUBTITLE

You can also operate this function

• To return to normal speed playback, press

by pressing the SUBTITLE

Repeating the Title or Chapter

the PLAY (

) button.

button on the remote control.

Selecting the Audio Language

hzZ�

NOTE

✎

1. During playback, press the TOOLS button.

2. Press the ▲▼ buttons to select Subtitle.

3. Press the ◄► buttons to select the

desired subtitle language.

hzZ�

▪

The player does not play sound in Slow mode.

Lets you repeat the disc title or chapter.

Depending on the disc, the Repeat function

may not be available.

Step Motion Play

AUDIO

You can also operate this function

by pressing the AUDIO button on

NOTE

1. During playback, press the

✎

REPEAT

the remote control.

hzZ��

• In pause mode, press the PAUSE (

REPEAT button.

▪

Depending on the Blu-ray Disc / DVD, you may

2. Press the ▲▼ buttons to select

Chapter or Title, then press the

ENTER button.

be able to select the desired subtitle in the Disc

)

1. During playback, press the TOOLS button.

2. Press the ▲▼ buttons to select Audio.

3. Press the ◄► buttons to select the

desired audio language.

Menu. Press the DISC MENU button.

button.

▪

This function depends on the selection of

subtitles that are encoded on the disc and may

not be available on all Blu-ray Discs/DVDs.

Each time you press the PAUSE (

button, a new frame appears.

)

3. To return to normal play, press the

REPEAT button again.

• To return to normal speed playback, press

NOTE

4. Press the ▲▼ buttons to select Off, then

✎

▪

A Blu-ray Disc can contain up to 255 subtitle

the PLAY (

) button.

languages and a DVD up to 32.

press the ENTER button.

▪

The ◄► indicator will not appear on the screen

Information about the main feature/BONUSVIEW

NOTE

✎

if the BONUSVIEW section does not contain any

BONUSVIEW audio settings.

mode will also appear if the Blu-ray Disc has a

BONUSVIEW section.

Repeating a Section

▪

The player does not play sound in step mode.

▪

Information about the main feature/BONUSVIEW

mode will also appear if the Blu-ray Disc has a

BONUSVIEW section.

▪

This function changes both the primary and

secondary subtitles at the same time.

The total number of primary and secondary

subtitles are displayed respectively.

If you press the SUBTITLE button on the remote

control, the subtitle bar appears.

Using the TOOLS button

hzZ�

Press the ◄► button to switch between main

feature and BONUSVIEW audio modes.

This function depends on the selection of audio

languages encoded on the disc and may not be

available.

REPEAT

1. During playback, press the REPEAT

During playback, you can operate

the disc menu by pressing the

TOOLS button.

button.

▪

2. Press the ▲▼ buttons to select

Repeat A-B.

Press the RETURN button to remove the subtitle

bar.

3. Press the ENTER button at the point

where you want repeat play to start (A).

NOTE

✎

A Blu-ray Disc can contain up to 32 audio

languages and a DVD up to 8.

▪

Depending on the disc, the Tools menu may

differ.

Download from Www.Somanuals.com. All Manuals Search And Download.

Repeat Modes :

Audio CD (CD-DA)/MP3 Screen

Elements

Setting BONUSVIEW

Changing the Camera Angle

Tracks on a disc are

played in the order

Audio CD

Off

(CD-DA)/MP3 in which they were

The BONUSVIEW feature allows you to view

additional content (such as commentaries)

in a small screen window while the movie is

playing.

When a Blu-ray Disc/DVD contains multiple

angles of a particular scene, you can use the

ANGLE function.

recorded on the disc.

Current track is

repeated.

Playlist

1/6

Audio CD

(CD-DA)

TRACK 001

(

) Track

) One

) All

TRACK 001

TRACK 002

TRACK 003

TRACK 004

TRACK 005

TRACK 006

05:57

04:27

04:07

1. During playback, press the TOOLS button.

2. Press the ▲▼ buttons to select Angle.

3. Press the ◄► buttons to select the

desired Angle.

This function is only available if the disc has

the Bonusview feature.

Current track is

MP3

03:41

repeated.

00:08 / 05:57

03:17

1. During playback, press the

Audio CD

All tracks are

03:35

TOOLS button.

(CD-DA)/MP3 repeated.

Pause

Tools

Return

Selecting the Picture Settings

hzZ�

2. Press the ▲▼ buttons to

select BONUSVIEW Video or

BONUSVIEW Audio.

The random option

Audio CD

plays a disc’s tracks

in random order.

(

)Shuffle

(CD-DA)/MP3

3. Press the ◄► buttons to select the

desired Bonusview.

This function enables you to adjust video

Displays the music information.

Displays the playlist.

Display the current track/total tracks.

Displays buttons available.

Shows the current play time/total play time.

Displays the current playback status.

Displays the repeated playback status.

quality when the player is connected to a TV.

Playlist

NOTE

✎

1. During playback, press the TOOLS button.

▪

If you switch from BONUSVIEW Video,

BONUSVIEW Audio will change automatically in

accordance with BONUSVIEW Video.

1. Insert an Audio CD (CD-DA) or an MP3

Disc into the disc tray.

2. Press the ▲▼ buttons to select Picture

Setting, and then press the ENTER

button.

• For an Audio CD (CD-DA), the first track

plays automatically.

3. Press the ◄► buttons to select the

Listening to Music

• For an MP3 disc, press the ◄► buttons

to select Music, then press the ENTER

button.

desired Picture Setting

• Dynamic : Choose this setting to

_{Playing an Audio CD (C}o_D-DA)�_/MP3

2. To move to the Music List, press the

increase Sharpness.

STOP (

) or RETURN button.

• Normal : Choose this setting for most

The Music List screen appears.

3. Press the ▲▼◄► buttons to move to a

desired track, then press the YELLOW (C)

button to check the desired track.

Repeat this procedure to select additional

tracks.

viewing applications.

1. Insert an Audio CD (CD-DA) or

an MP3 Disc into the disc tray.

• For an Audio CD (CD-DA), the

first track plays automatically.

• For an MP3 disc, press the

◄► buttons to select Music, then

press the ENTER button.

Repeat an Audio CD (CD-DA)/

MP3

• Movie : This is the best setting for

watching movies.

• User : Lets you adjust the sharpness

and noise reduction function

respectively.

1. During the Playlist playback,

press

the TOOLS button.

4. If you want to remove a track from the

playlist, go to the track, and then press the

YELLOW (C) button again. The track is

removed.

2. Select Repeat Mode, and then press the

◄► buttons to select the desired repeat

mode.

NOTE

✎

▪

When you use BD wise function, this menu will

not appear.

2. Press the ▲▼ buttons to select the track

you want to play, and then press the

ENTER button.

5. Press the ENTER button to play the

selected tracks.

3. Press the ENTER button

The selected tracks will play automatically.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing back a USB Storage Device

• Zoom : Select to enlarge the current

6. To go to the Music List, press the STOP (

)

YouTube

picture. (Enlarged up to 4 times)

or RETURN button.

7. To go to the Playlist, press the ENTER

You can use the USB connection to play

multimedia files (MP3, JPEG, DivX, etc) located

on a USB storage device.

• Rotate : Select to rotate the picture. (This

will rotate the picture either clockwise or

counter clockwise.)

button.

NOTE

✎

• Information : Shows the picture information

1. Move to the Home menu.

2. In Stop mode, connect the USB storage

device to the USB port on the front panel

of the player.

▪

You can create a playlist with up to 99 tracks on

including the name and size, etc.

Audio CDs (CD-DA).

123

Home

Enter

NOTE

✎

▪

To enable the background music function, the

photo file must be in the same storage media as

the music file. However, the sound quality can

be affected by the bit rate of the MP3 file, the

size of the photo, and the encoding method.

-1

5 . Press the ◄► buttons to select USB,

The message “Do you want to access the

device?” will be displayed.

Playing back Pictures

then press the ENTER button.

-1

6 . Press the ▲▼ buttons to select the

3. Press the ◄► button to select Yes, then

desired Videos, Music or Photos, then

press the ENTER button.

4. Press the RED (A) button or BLUE (D)

button.

Playing JPEG files

7. For playing back Video, Music or Photo

files see pages 19~22.

Playing Selected Photos

If you pressed the RED (A) button, go to

1. Insert a JPEG disc into the disc tray.

2. Press the ◄► buttons to select Photos,

and then press the ENTER button.

3. Press the ▲▼◄► buttons to select the

folder you want to play, and then press the

ENTER button.

You can select spesific photos to play pressing

the YELLOW (C) button on your remote. To

select specific photos, follow these steps:

Step 5.

NOTE

✎

If you pressed the BLUE (D) button, go to

-1

▪

You must remove the USB storage device

safely (by performing the “Safely Remove USB”

function) in order to prevent possible damage

to the USB memory. Press the MENU button to

move to the Home menu, select the YELLOW (C)

button, and then press the ENTER button.

When the Audio-CD (CD-DA), MP3 or JPEG files

are in stop mode, pressing the FULL SCREEN

button on the remote will not bring up a full

screen picture.

Step

1. Select the folder that contains the photos

you want to view, and then press the

ENTER button.

YouTube

4. Press the ▲▼◄► buttons to select the

photo you want to play, and then press the

ENTER button.

2. Press the ▲▼◄►buttons to select a

photo you want to play, and then press

the YELLOW (C) button. A check mark

appears on the photo.

▪

No Disc

123

NOTE

✎

DLNA

123

3. Repeat Step 2 for each photo you want to

▪

You can’t enlarge the subtitle and PG graphic in

Change Device

Safely Remove USB

View Devices

Enter

play.

the full screen mod

If you insert a disc when playing a USB storage

device, the device mode changes to “DVD or

CD” automatically.

NOTE

✎

5. Press the ▲▼ buttons to select USB,

Using the TOOLS button

▪

To deselect a photo, press the

then press the ENTER button.

▲▼◄►buttons to highlight the photo,

and then press the YELLOW (C) button.

6. Press the ◄► buttons to select the

desired Videos, Music or Photos, then

press the ENTER button. Go to Step 7

You can use various functions by

pressing the TOOLS button.

4. Press the ENTER button when done. The

• Start Slide Show : Select to start

slide show starts.

-1

the slide show.

4 . If you pressed the BLUE (D) button, the

-1

• Stop Slide Show : Select if you want to

screen below appears. Go to 5 .

stop the slide show.

• Slide Show Speed : Select if you want to

adjust the Slide Show speed.

• Background Music : Select to listen to

music while viewing a slide show.

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix

Network Services

You can enjoy various network services such

as BD-LIVE by connecting the player to your

network.

Troubleshooting

Using the AllShare Function

AllShare lets you play music, video, and photo

Before requesting service, please try the following solutions.

files located in your PC or NAS on the player.

Read the following instructions before

using any network service.

PROBLEM

SOLUTION

To use AllShare with your player, you must

connect the player to your network (See

pages 10~11).

1. Connecting the player to the network

No operation can be

performed with the remote

control.

•

Check the batteries in the remote control. They may need replacing.

Operate the remote control at a distance of no more than 20 feet.

(pages 10 and 11).

To use AllShare with your PC, you must install

AllShare software on your PC.

2. Configuring the network settings

Remove batteries and hold down one or more buttons for several minutes

to drain the microprocessor inside the remote control to reset it. Reinstall

batteries and try to operate the remote control again.

(page 16).

If you have NAS, you can use AllShare without

any additional software.

To download AllShare software :

Disc does not play.

•

Ensure that the disc is installed with the label side facing up.

Check the region number of the Blu-ray Disc/DVD.

BD-LIVE™

1. Go to Samsung.com

Once the player is connected to the network,

you can enjoy various movie-related service

contents using a BD-LIVE compliant disc.

2. Click Support, enter your player’s product

number in the field that appears, and then

click Product.

Disc Menu does not appear.

•

Ensure that the disc has disc menus.

The prohibition message

•

This message appears when an invalid button is pressed.

1. Attach a USB memory stick to the USB

jack on the side of the player, and then

check its remaining memory. The memory

device must have at least 1GB of free

space to accommodate the BD-LIVE

services.

3. On the next screen, click Get downloads

appears on the screen.

The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).

You’ve requested a title or chapter number or search time that is out of range.

under Downloads.

4. Click Software on the next page.

5. Click the icon in the AllShare line under File

Play mode differs from the

Setup Menu selection.

•

Some of the functions selected in the Setup Menu may not work properly if

to start the download.

the disc is not encoded with the corresponding function.

2. Insert a Blu-ray Disc that supports BD-

The screen ratio cannot be

•

The Screen Ratio is fixed on your Blu-ray Disc/DVD.

This is not a problem with the player.

LIVE.

changed.

3. Select an item from various BD-LIVE

service contents provided by the disc

manufacturer.

No audio.

•

Make sure you have selected the correct Digital Output in the Audio Options Menu.

The screen is blocked

If the HDMI output is set to a resolution your TV cannot support (for example,

NOTE

✎

1080p), you may not see a picture on your TV.

•

Press the PLAY/PAUSE

(

) button (on front panel) for more than 5

▪

The way you use BD-LIVE and the provided contents

may differ, depending on the disc manufacturer.

seconds with no disc inside. All settings will revert to the factory settings.

When the factory default settings are restored, all stored user BD data is deleted.

Download from Www.Somanuals.com. All Manuals Search And Download.

PROBLEM

SOLUTION

PROBLEM

BD-LIVE

SOLUTION

Forgot password

•

Press the PLAY/PAUSE

settings.

(

) button (on front panel) for more than 5 seconds

with no disc inside. All settings including the password will revert to the factory

I cannot connect to the BD-

•

Check whether the network connection is successful or not by using the

Network Status menu.

LIVE server.

Don’t use this unless absolutely necessary.

•

Check whether the USB memory device is connected to the player.

The memory device must have at least 1GB of free space to accommodate

the BD-LIVE service.

•

When the factory default settings are restored, all stored user BD data is deleted.

If you experience other

problems.

Go to the contents and find the section of the user manual that contains the

explanations regarding the current problem, and follow the procedure once again.

If the problem still cannot be solved, please contact your nearest Samsung

authorized service center.

You can check the available size in BD Data Management.

Check whether the BD-LIVE Internet Connection menu is set to Allow(All).

If all above fails, contact the contents provider or update the player to the

latest firmware.

•

The picture is noisy or

distorted

•

Make sure that the disc is not dirty or scratched.

When using the BD-LIVE

service, an error occurs.

•

The memory device must have at least 1GB of free space to accommodate

Clean the disc.

the BD-LIVE service.

No HDMI output.

•

Check the connection between the TV and the HDMI jack of the player.

You can check the available size in BD Data Management.

•

heck if your TV supports 576p/480p, 720p, 1080i, 1080p HDMI input resolution

NOTE

✎

Abnormal HDMI output

screen.

•

If random noise appears on the screen, it means that TV does not support

▪

When the factory default settings are restored, all stored user BD data is deleted.

HDCP (High-bandwidth Digital Content Protection).

Repairs

AllShare function

I can see folders shared

through AllShare, but I

cannot see the files.

AllShares shows only files corresponding to the Image, Music, and Movie

categories. Files that do not correspond to these categories may not be

displayed.

If you contact us to repair your player, an administration fee may be charged if either:

1. An engineer is called out to your home at your request and there is no defect in the product.

2. You bring the unit to a repair center and there is no defect in the product.

We will provide you with the amount of the administration fee before we make a home visit

or begin any work on your player.

Video is played

•

Check if the network is stable.

intermittently.

Check if the network cable is properly connected and if the network is not

We recommend you read this manually thoroughly, search for a solution on line at www.

samsung.com, or contact Samsung Customer Care before seeking to repair your player.

overloaded.

AllShare connection

between Player and PC is

unstable.

•

The IP address under the same subnetwork should be unique. If they are not,

IP interference can cause this phenomenon.

Check if you have a firewall enabled.

If so, disable the firewall function.

Download from Www.Somanuals.com. All Manuals Search And Download.

Compliance and Compatibility Notice

Specifications

NOT ALL discs are compatible

•

Subject to the restrictions described below and those noted throughout this Manual, including the Disc Type

and Characteristics section of this user manual, disc types that can be played are: pre-recorded commercial

BD-ROM, DVD-VIDEO, and Audio CD (CD-DA) discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs.

Discs other than the above cannot and/or is not intended to be played by this player. And some of the

above discs may not play due to one or more reasons provided below.

Weight

1.3 Kg

Dimensions

360 (W) X 193 (D) X 41 (H) mm

+5°C to +35°C

•

General

Disc

Operating Temperature Range

Operating Humidity Range

BD (Blu-ray Disc)

Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,

DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not respond to all

operating commands or operate all features of every disc. These and other disc compatibility and player

operation issues with new and existing format discs are possible because:

10 % to 75 %

Reading Speed : 9.834 m/sec

Reading Speed : 6.98 ~ 7.68 m/sec

Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.

Reading Speed : 4.8 ~ 5.6 m/sec.

Maximum Play Time : 74 min.

Reading Speed : 4.8 ~ 5.6 m/sec.

Maximum Play Time : 20 min.

1080p, 1080i, 720p, 576p/480p

PCM audio, Bitstream audio

Coaxial

Blu-ray is a new and evolving format and this player may not operate all features of Blu-ray Discs

because some features may be optional, additional features may have been added to the Blu-ray

Disc format after the production of this player, and certain available features may be subject to delayed

availability;

DVD (Digital Versatile Disc)

CD : 12 cm (COMPACT DISC)

CD : 8 cm (COMPACT DISC)

not all new and existing disc format versions are supported by this player;

new and existing disc formats may be revised, changed, updated, improved and/or supplemented;

some discs are produced in a manner that allows specific or limited operation and feature during

playback;

some features may be optional, additional features may have been added after the production of this

player or certain available features may be subject to delayed availability;

some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and

CD-RW/-R logos may still be non-standardized discs;

some discs may not be played depending on their physical state or recording conditions;

problems and errors can occur during the creation of Blu-ray Disc, DVD software and/or the manufacture

of discs;

this player operates differently than a standard DVD player or other AV equipment; and/or

for reasons noted throughout this user manual and for other reason(s) discovered and posted by

SAMSUNG customer care center.

Video/Audio

Audio Output

HDMI

•

If you encounter disc compatibility or player operation problems, please contact SAMSUNG customer care

center.

Digital Audio Output

You may also contact SAMSUNG customer care center for possible updates on this player.

For additional information on playback restrictions and disc compatibility, refer to the Precautions, Before

Design and specifications are subject to change without prior notice.

Reading the user manual, Disc Types and Characteristics, and Before Playing sections of this user manual.

- For the power supply and power consumption, refer to the label attached to the

product.

Copy Protection

Weight and dimensions are approximate.

•

Because AACS (Advanced Access Content System) is approved as content protection system for

Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions

are imposed on playback, analog signal output, etc., of AACS protected contents.

The operation of this product and restrictions on this product may vary depending on your time of purchase

as those restrictions may be adopted and/or changed by AACS after the production of this product.

Furthermore, BD-ROM Mark and BD+ are additionally used as content protection system for Blu-ray Disc

format, which imposes certain restrictions including playback restrictions for BD-ROM Mark and/or BD+

protected contents. To obtain additional information on AACS, BD-ROM Mark, BD+, or this product, please

contact SAMSUNG customer care center.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should only connect

your Player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-

protected Blu-ray Disc/DVDs.

License

• Manufactured under license from Dolby Laboratories. Dolby and the

•

This item incorporates copy protection technology that is protected by U.S. patents and other intellectual

property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use, display,

distribution, or revision of television programs, videotapes, Blu-ray Discs, DVDs, and other materials may

subject you to civil and/or criminal liability.

double-D symbol are trademarks of Dolby Laboratories.

• Manufactured under license under U.S. Patent #’s : 5,451,942; 5,956,674;

5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents

issued & pending. DTS and the Symbol are registered trademarks & DTS

2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. Product

•

For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT NOT ALL

HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY

CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF PROGRESSIVE SCAN PICTURE

PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD

DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS

PRODUCT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.

• DivX

ABOUT DIVX VIDEO : DivX is a digital video format created by DivX, LLC, a

Network Service Disclaimer

subsidiary of Rovi Corporation.

This is an DivX Certified device that plays DivX video.

All content and services accessible through this device belong to third parties and are protected by copyright,

patent, trademark and/or other intellectual property laws. Such content and services are provided solely for

your personal noncommercial use. You may not use any content or services in a manner that has not been

authorized by the content owner or service provider. Without limiting the foregoing, unless expressly authorized

by the applicable content owner or service provider, you may not modify, copy, republish, upload, post,

transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any content or

Visit www.divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND : This DivX Certified device must be registered in

order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration

code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for

more information on how to complete your registration.

services displayed through this device.

THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS IS.” SAMSUNG DOES NOT WARRANT

CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE.

SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO,

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SAMSUNG DOES NOT

GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT

OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES, INCLUDING

NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT OR TORT, FOR ANY DIRECT,

INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES, OR

ANY OTHER DAMAGES ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN,

OR AS A RESULT OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF

DivX Certified to play DivX video up to HD 1080p, including premium content.

DivX , DivX Certified and associated logos are trademarks of Rovi Corporation or its

subsidiaries and are used under lisence.

Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710;

7,519,274.

• HDMI, the HDMI Logo, and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC in the

United States and other countries.

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

• Oracle and Java are registered trademarks of Oracle and/or its affiliates.

Third party services may be terminated or interrupted at any time, and Samsung makes no representation

or warranty that any content or service will remain available for any period of time. Content and services are

transmitted by third parties by means of networks and transmission facilities over which Samsung has no

control. Without limiting the generality of this disclaimer, Samsung expressly disclaims any responsibility or

liability for any interruption or suspension of any content or service made available through this device.

Other names may be trademarks of their respective owners

• Open Source License Notice

Samsung is neither responsible nor liable for customer service related to the content and services. Any

question or request for service relating to the content or services should be made directly to the respective

content and service providers.

In the case of using open source software, Open Source Licenses are available on the

product menu.

• Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.

• This item incorporates copy protection technology that is protected by U.S. patents and

other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly

are prohibited.

Download from Www.Somanuals.com. All Manuals Search And Download.

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the

SAMSUNG customer care center.

Area

Contact Center 

Web Site

www.samsung.com

Area

Contact Center 

Web Site

` North America

Canada

0700 Samsung (0700 726

7864)

Serbia

www.samsung.com

1-800-SAMSUNG (726-7864)

Slovakia

0800-SAMSUNG (726-7864)

Mexico

01-800-SAMSUNG (726-7864) www.samsung.com

Spain

902-1-SAMSUNG (902 172 678) www.samsung.com

U.S.A

1-800-SAMSUNG (726-7864)

www.samsung.com

Sweden

0771 726 7864 (SAMSUNG)

www.samsung.com

` Latin America

Argentine

Brazil

www.samsung.com/ch

www.samsung.com/

ch_fr/(French)

0800-333-3733

0800-124-421 / 4004-0000

800-SAMSUNG (726-7864)

01-8000112112

0-800-507-7267

1-800-751-2676

1-800-10-7267

800-6225

www.samsung.com

0848-SAMSUNG (7267864,

Switzerland

CHF 0.08/min)

Chile

U.K

0330 SAMSUNG (7267864)

0818 717100

www.samsung.com

Colombia

Costa Rica

Dominica

Ecuador

Eire

Lithuania

Latvia

8-800-77777

8000-7267

Estonia

` CIS

800-7267

El Salvador

Guatemala

Honduras

Jamaica

1-800-299-0013

800-7919267

Russia

Georgia

Armenia

Azerbaijan

8-800-555-55-55

8-800-555-555

0-800-05-555

www.samsung.com

1-800-234-7267

00-1800-5077267

800-7267

Nicaragua

Panama

088-55-55-555

8-10-800-500-55-500

(GSM: 7799)

Kazakhstan

Uzbekistan

Kyrgyzstan

Tadjikistan

www.samsung.com

Peru

0-800-777-08

Puerto Rico

1-800-682-3180

8-10-800-500-55-500

00-800-500-55-500

8-10-800-500-55-500

www.samsung.com

Trinidad &

Tobago

1-800-SAMSUNG (726-7864)

0-800-100-5303

www.samsung.com

Venezuela

` Europe

Albania

www.samsung.ua

www.samsung.com/

ua_ru

Ukraine

0-800-502-000

42 27 5755

0810 - SAMSUNG (7267864,

€ 0.07/min)

Belarus

810-800-500-55-500

00-800-500-55-500

Austria

www.samsung.com

Moldova

www.samsung.com/

` Asia Pacific

be (Dutch)

Belgium

02-201-24-18

Australia

1300 362 603

www.samsung.com

www.samsung.com/

be_fr (French)

New Zealand

China

0800 SAMSUNG (0800 726 786) www.samsung.com

400-810-5858 / 010-6475 1880 www.samsung.com

www.samsung.com/hk

Bosnia

Bulgaria

Croatia

05 133 1999

07001 33 11

www.samsung.com

Hong Kong

(852) 3698 4698

www.samsung.com/

hk_en/

www.samsung.com

062 SAMSUNG (062 726 7864) www.samsung.com

800-SAMSUNG (800-726786)

3030 8282 / 1800 110011 /

India

Samsung Zrt., česká organizační

1800 3000 8282 / 1800 266 8282

Czech

www.samsung.com

složka, Oasis Florenc,

0800-112-8888 / 021-5699-

7777

Sokolovská394/17, 180 00, Praha

Indonesia

www.samsung.com

Japan

0120-327-527

1800-88-9999

Denmark

Finland

France

Germany

70 70 19 70

www.samsung.com

Malaysia

030 - 6227 515

01 48 63 00 00

1-800-10-SAMSUNG(726-7864) /

1-800-3-SAMSUNG(726-7864) /

1-800-8-SAMSUNG(726-7864) /

02-5805777

Philippines

www.samsung.com

01805 - SAMSUNG (726-7864

€ 0,14/Min)

Hungary

06-80-SAMSUNG (726-7864)

800-SAMSUNG (726-7864)

+381 0113216899

261 03 710

www.samsung.com

Singapore

Thailand

Taiwan

1800-SAMSUNG (726-7864)

Italia

www.samsung.com

1800-29-3232 / 02-689-3232 www.samsung.com

Kosovo

0800-329-999

1 800 588 889

www.samsung.com

Luxemburg

Macedonia

Montenegro

www.samsung.com

Vietnam

` Middle East

Bahrain

023 207 777

020 405 888

8000-4726

www.samsung.com

0900-SAMSUNG (0900-

7267864) (€ 0,10/Min)

Egypt

08000-726786

800-22273

Netherlands

Norway

Poland

www.samsung.com

Jordan

815-56 480

Morocco

Oman

080 100 2255

0 801 1SAMSUNG (172678)

/ 022-607-93-33

800-SAMSUNG (726-7864)

9200-21230

Saudi Arabia

Turkey

Portugal

80820-SAMSUNG (726-7864)

444 77 11

1. 08010 SAMSUNG (72678) -

doar din reţeaua Romtelecom,

tarif local

U.A.E

800-SAMSUNG (726-7864)

` Africa

Rumania

www.samsung.com

2. 021.206.01.10 - din orice

reţea, tarif normal

Nigeria

0800-SAMSUNG (726-7864)

0860-SAMSUNG (726-7864 )

www.samsung.com

South Africa

AK68-02162A-00

Download from Www.Somanuals.com. All Manuals Search And Download.

RBH Sound Portable Speaker MC 6CT User Guide
RCA TV Mount MST65BKR User Guide
RCA Universal Remote CRCR351 User Guide
Renesas Computer Hardware M37515T PTC User Guide
Ricoh Printer SP 8200DN User Guide
Samson Two Way Radio CONCERT 88 EARSET User Guide
Samsung Digital Camera A63 User Guide
Samsung MP3 Player YP U5 User Guide
Scag Power Equipment Lawn Mower MODEL TS User Guide
Schumacher Battery Charger MODELS SC 600A User Guide