DR-S0426 / DRE-S0426P
4 Channel Stand-alone
Digital Video Recorder
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
INDEX - TABLE OF CONTENTS------------------------------------------------------------------------------------------
SETUP MENU LIST-----------------------------------------------------------------------------------------------------------
CHAPTER 1 INTRODUCTION / FEATURE--------------------------------------------------------------------------
CHAPTER 2 HARDWARE OVERVIEW ------------------------------------------------------------------------------
CHAPTER 3 SETUP PROCEDURES ---------------------------------------------------------------------------------
0. LIVE VIEWING------ ------------------------------------------------------------------------------------------
1. MAIN MENU SETUP -----------------------------------------------------------------------------------------
2. SYSTEM SETUP ---------------------------------------------------------------------------------------------
3. CAMERA SETUP ---------------------------------------------------------------------------------------------
1
2
3
4
7
7
7
8
9
4. RECORD SETUP --------------------------------------------------------------------------------------------- 10
5. ALARM SETUP------------------------------------------------------------------------------------------------ 11
6. SCHDULED RECORD -------------------------------------------------------------------------------------- 12
7. EVENT LIST ---------------------------------------------------------------------------------------------------- 12
8. HDD MANAGEMENT ---------------------------------------------------------------------------------------- 13
9. LOAD DEFAULT ---------------------------------------------------------------------------------------------
15
10. EXIT ------------------------------------------------------------------------------------------------------------ 15
CHARPTER 4 OPERATION PROCEDURES ----------------------------------------------------------------------- 16
1. GETTING STARTED WITH YOUR MACHINE -------------------------------------------------------- 16
2. RECORDING -------------------------------------------------------------------------------------------------- 16
3. PLAYBACK ----------------------------------------------------------------------------------------------------- 16
4. HARD DISK AND CF CARD RECOMMEND ---------------------------------------------------------- 19
5. VCR -------------------------------------------------------------------------------------------------------------- 19
6. ALARM CONTROL ------------------------------------------------------------------------------------------- 19
7. EXTERNAL ALARM CONNECTOR ---------------------------------------------------------------------- 20
8. VGA OUTPUT ------------------------------------------------------------------------------------------------- 21
9. RS-485 CONTROL PROTOCOL-------------------------------------------------------------------------
22
CHAPTER 5 SPECIFICATIONS ---------------------------------------------------------------------------------------- 23
CHAPTER 6 RECORDING TIME LENGTH ------------------------------------------------------------------------- 24
CHAPTER 7 HARD DRIVE INSTALLATION PROCEDURES -------------------------------------------------- 25
S2.21
2006/JAN/16
a11633RM4F17
1
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MENU List
SETUP MENU
SYSTEM SETUP
SYSTEM SETUP
CAMERA SETUP
RECORD SETUP
ALARM SETUP
SCHEDULE RECORD
EVENT LIST
HDD MANAGEMENT
DEAFULT SETUP
EXIT
DVR ID NUMBER
1
SET TIME/DATE
TIME DISPLAY MODE
TIME DISPLAY
YY/MM/DD
ON
LANGUAGE SELECT
KEY LOCK
MENU SETUP PROTECTION
CHANGE PASSWORD
SYSTEM SELECT
EXIT
ENGLISH
OFF
OFF
NTSC
CAMERA SETUP
CAMERA SELECT
CAMERA RECORD
[CAM1]
ON
MOTION SENTSITIVITY 1[MIN]
MOTION AREA SETUP
EVENT LIST
BRIGHTNESS
CONTRAST
HUB
CAMERA TITLE EDIT
EXIT
STANDARD
STANDARD
STANDARD
HARD DRIVER: MASTER
START TIME: 2005/MAY/16 12:07:00
END TIME: 2005/MAY/16 12:07:30
> 01 RECORD 2005/MAY/16 12:07:00
02 MOT CH1 2005/MAY/16 12:06:00
03 MOT CH2 2005/MAY/16 12:05:00
04 MOT CH3 2005/MAY/16 12:04:00
05 ALM CH1 2005/MAY/16 12:03:00
06 ALM CH2 2005/MAY/16 12:02:00
07 ALM CH3 2005/MAY/16 12:01:00
RECORD SETUP
RECORD MODE
MUX
30P
30P
NORMAL RECORD FPS
ALARM RECORD FPS
ALARM RECORD DWELL 10SEC
HDD MANAGEMENT
RECORD QUALITY
MOTION MIGRATION
EXIT
HIGH
ON
OVERWRITE ENABLE
HDD FULL WARNING
MASTER HDD CAPACITY
MASTER HDD LEFT RATIO
MASTER HDD FORMAT
SLAVE HDD CAPACITY
SLAVE HDD LEFT RATIO
SLAVE HDD FORMAT
EXIT
YES
10%
76GB
73GB 97%
N/A
N/A
N/A
ALARM SETUP
N/A
[BUZZER]
BUZZER DWELL
VIDEO LOSS ALARM
MOTION ALARM
EXTERNAL ALARM
5SEC
ON
OFF
ON
DEAFULT SETUP
SET FOR ALL
SYSTEM SETUP
CAMERA SETUP
RECORD SETUP
ALARM SETUP
EXIT
OFF
OFF
OFF
OFF
OFF
[RELAY]
VIDEO LOSS ALARM
MOTION ALARM
EXTERNAL ALARM
ON
ON
ON
EXTERNAL SENOR SETUP
ALARM DISPLAY MODE OFF
EXIT
SCHEDULE SETUP
0
3
6
9
12 15 18 21 24
2
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 1
INTRODUCTION
This product is 4 cameras input appliance with multiple function which will bring you
following features:
z Device can be performed as VHS system with live display, play back and video
recording.
z Device operates in hardware base with no OS (operating system) necessary for
more reliability and stability.
z Digitize data storage with M-JPEG compression technology will give you
organized video data management without using mess huge traditional video
tape.
z Support various type of camera with real, live mode display.
z Multi-speed recording selection on normal recording mode or alarm recording
mode, the highest speed of recording is 30/25 (NTSC/PAL) fields on both mode.
z Title, contrast, hue and brightness are adjustable for each camera individually.
z Support up to 2 hard disks (HDD) from 40GB to 400GB compatible & status
indicator on screen.
z When external alarm is triggered, corresponding cameras number will show up
on the monitor with texts.
z Selectable recording qualities (best/high/medium/low).
z Recording can operate manually or gets activated automatically when alarm is
triggered.
z Motion detection function available, user can easily adjust sensitive & area of
motion detection.
z Playback record can be searched by time or by event list.
z Play back mode could not be easier then ever for you to review the video that
gets recorded on reverse (x16) and fast forwarding (×4, ×8, and ×16).
z Play back mode with pause (field by field) for forward.
z Easy operation, setting can be easily modified OSD (on screen display) menu.
z Device will overwrite data and notice operator on monitor when the HDD is
going full.
z HDD capacity status can be show on the screen for better storage
management.
z System will restore the previous setting and continue camera activity after
restart.
z Provide 2 Monitor output & optional VGA output function.
z Alarm notification could be sent via email when motion or external alarms are
triggered.
z Optional audio function.
z Date type selectable.
z Support DVR ID setting for joystick control panel.
z NTSC/PAL switching by OSD menu.
z External Alarm NO/NC Selection & Individual Relay On/Off Selection.
z Advanced buzzer control.
z Force recording under schedule recording in no record mode.
z Password & key lock protect even power lose.
*New function in boldface
3
Download from Www.Somanuals.com. All Manuals Search And Download.
a11633RM4F17
CHAPTER 2
Hardware Overview
Front Panel Layout Overview
1
2
3
4
5
6
7
8
9
10 20 17 21
23
22
POWER
REC
Quad
Copy
Rec
1
2
3
4
PLAY
H.D.D
MENU
ENTER
Rew
Stop
Pause
F.Fwd
Play
Search
Search
Digital Video Recorder
18
19
11 12 13 14 15 16
Buttons Function List
1. DVR ESSENTIAL OPERATION
Part
Label
POWER
REC
Function
1
2
3
4
Power status LED.
Recording status LED.
Playback status LED.
H.D.D LED
PLAY
H.D.D
5
6
7
8
9
Press REC to start recording.
REC
1
1.
2.
This View button controls FULL SCREEN display from camera 1.
A password can be setup by the view control button for number 1.
1.
2.
This View button controls FULL SCREEN display from camera 2.
A password can be setup by the view control button for number 2.
2
3
4
1.
2.
This View button controls FULL SCREEN display from camera 3.
A password can be setup by the view control button for number 3.
1.
2.
This View button controls FULL SCREEN display from camera 4.
A password can be setup by the view control button for number 4.
10
11
Quad screen: All cameras are displayed.
CF or CDRW Backup button.
Quad
COPY
12
13
16 times speed fast rewind mode.
Rew Search
STOP
Press Stop to stop playback or recording.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Press Pause to pause (field by field) for forward.
Pause
Press F. Fwd to play video forward at high speed. Press the button
again the speed will be change circulative from ×2,×4, to the
highest ×8.
15
16
17
F.Fwd Search
Press the Play button to into time search and play video forward.
PLAY
1. Move the cursor upward or decrease the number.
2. When it's not under recording mode, you can use the button to
▲
adjust position of date & time display which appears on OSD.
1. Move the cursor downward or increase the number.
2. When it's not under recording mode, you can use the button to
adjust position of date & time display which appears on OSD
▼
18
19
20
MENU
Press MENU to go into or exit menu.
1. Press ENTER button to choose or confirm in MENU system.
2. You can use ENTER key to indicates H.D.D status when system is
not under Menu mode.
◄ ( ENTER)
3. Make any changes in the selected option or decrease/increase
the number.
21
► ( ENTER)
22
23
CF Card
Slot for compact flash (CF) card. (Option)
Removable HDD or CDRW. (Option)
HDD/CDRW
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Back Panel Layout Overview
24 25
26
27
28
30
31
32
29
33
34
35
2. Back Panel Components Function List
Part
24
Label
ETHERNET
Function
Reserved
25
26
27
28
29
30
31
32
33
34
35
LED
Reserved
COM PORT
COM port for RS-485 interfaces which upon to request.
4 pin Terminal. For external control of unit.
Camera 1-4 video output with BNC connector.
Camera 1-4 video input with BNC connector.
Composite video output with 2 BNC connectors.
Setting Resolution & Frequency. (Option)
RS-485 header
CAMERA OUT
CAMERA IN
MONITOR OUT
VGA SETUP DIP
VGA D-SUB OUT
Audio IN / OUT
ALARM IN / Relay
POWER / POWER SW
Connect to CRT or LCD monitor. (Option)
Audio input / output RCA connectors. (Option)
8-Pin Alarm input and Relay output connector.
AC100V~AC240V, Frequency 47-63Hz input.
Power ON/OFF switcher.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3
SETUP PROCEDURES
0. LIVE VIEWING
Å---- STATUS BAR
REC 30P 2005/MAY/16 10:20:30 MON
MOT [CAM1]O O[CAM2]
[CAM3]O O[CAM4]
[M] 231GB/239GB 97% [S] N/A
Å---- INFORMATION BAR
STATUS BAR
Press ▲ button move from top or downgrade a line, and how many recording FPS will show on the left
upper corner.
INFORMATION BAR
Press ▼ button move from bottom or upgrade a line, by ◄ or ► button to change information
between HARD DISK STSTUS, RECORDING MODE and AUDIO RECORDING STATUS.
While MENU mode without press any key would go back to live viewing mode
after 2 minutes. And during live viewing for 5 seconds would go back to
recording mode automatically, if full time or alarm record set before.
1. MAIN SETUP MENU
SETUP MENU
SYSTEM SETUP
CAMERA SETUP
RECORD SETUP
ALARM SETUP
SCHEDULE RECORD
EVENT LIST
Press the MENU button to go into the main
menu.
Use the ▲ or ▼ button to select items.
Press the ◄ or ► button to confirm the selection.
Press MENU to escape to exit the set up mode.
HDD MANAGEMENT
DEAFULT SETUP
EXIT
1. SYSTEM SETUP
System set up.
6. EVENT LIST
Recording event list
7. HDD MANAGEMENT
Hard disk management
8. DEAFULT SETUP
Return to factory setting
9. EXIT
2. CAMERA SETUP
Camera set up.
3. RECORD SETUP
Recording set up.
4. ALARM SETUP
Alarm set up.
Escape from the setup menu.
5. SCHEDULE RECORD
Schedule Recording set up.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2. SYSTEM SETUP
SYSTEM SETUP
Press ▲ or ▼ key on "SYSTEM SETUP" & ◄ or ►
to enter:
DVR ID NUMBER
SET TIME/DATE
TIME DISPLAY MODE
TIME DISPLAY
1
YY/MM/DD
ON
ENGLISH
OFF
OFF
Use the ▲ or ▼ button to select items.
Press the ◄ or ► button to confirm the selection.
Press MENU back to SETUP MENU.
LANGUAGE SELECT
KEY LOCK
MENU SETUPPROTECTION
CHANGE PASSWORD
SYSTEM SELECT
EXIT
NTSC
1. DVR ID NUMBER
1~32
Use W or X button to set up DVR ID for extension keyboard. Range from 1 to 32.
2. SET TIME/DATE
Use W or X button to move, ▲ or ▼ button to set up date & time, by MENU key back
to menu.
3. TIME DISPLAY MODE
Use W or X button to change YY/MM/DD, MM/DD/YY or DD/MM/YY.
4. TIME DISPLAY
Use W or X button to change ON or OFF.
5. LANGUAGE SELECT ENGLISH
Use W or X button to change language.
6. KEY LOCK ON/OFF
Use W or X button to change ON or OFF.
7. MENU SETUP PROTECT ON/OFF
ON/OFF
Use W or X button to change ON or OFF.
8. CHANGE PASSWORD
Key in password with following sequence CURREBT PASSWORD -> NEW PASSWORD
-> CONFIRM PASSWORD. Initial number is 1111. Use the view control button on the
front panel to input the number.
is "1" ,
is "2" ,
is "3" ,
is "4"
9. SYSTEM SELECT NTSC/PAL
Use W or X button to change NTSC or PAL video system.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3. CAMERA SETUP
CAMERA SETUP
Press ▲ or ▼ key on "CAMERA SETUP" & ◄ or
► to enter:
CAMERA SELECT
CAMERA RECORD
[CAM1]
ON
MOTION SENTSITIVITY 1[MIN]
MOTION AREA SETUP
Use the ▲ or ▼ button to select items.
Press the ◄ or ► button to confirm the
selection.
BRIGHTNESS
CONTRAST
HUB
STANDARD
STANDARD
STANDARD
CAMERA TITLE EDIT
EXIT
Press MENU back to SETUP MENU.
1. CAMERA SELECT
CAM1/CAM2/CAM3/CAM4
Use ◄ or ► button to select the camera from CH1 – CH4 to be adjusted.
2. CAMERA RECORD ON/OFF
Use ◄ or ► button to select recording function ON or OFF.
3. MOTION SENTSITIVITY
OFF / 1[MIN] / 2 / 3 / 4 / 5[MAX]
Use ◄ or ► button to adjust the sensitivity of the selected camera. From 0 (off) to 5
(MAX).
4. MOTION AREA SETUP
Use ◄ or ► button to enter motion area setup, here provide 2 areas for setting.
[PLAY] to change the position or area mode.
[▲ ▼ ◄ ►] to moving position or change area size.
[CH1] for default minimum size.
[CH2] for default size.
[CH3] for default maximum.
[QUAD] for help information on screen.
[MENU] back to pervious menu.
5. BRIGHTNESS
1 / 2 / 3 / 4 /STANDARD/ 6 / 7 / 8 / 9 /10
Use ◄ or ► button to adjust the brightness of the selected camera. Initial number is 5
(STANDARD).
6. CONTRAST
1 / 2 / 3 / 4 /STANDARD/ 6 / 7 / 8 / 9 /10
Use ◄ or ► button to adjust the contrast of the selected camera. Initial number is 5
(STANDARD).
7. HUB
1 / 2 / 3 / 4 /STANDARD/ 6 / 7 / 8 / 9 /10
Use ◄ or ► button to adjust the hue of the selected camera. Initial number is 5
(STANDARD).
8. CAMERA TITLE EDIT
Use ◄ or ► button to enter camera title edit mode, support up to 7 character each.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
4. RECORD SETUP
RECORD SETUP
Press ▲ or ▼ key on "RECORD SETUP" & ◄ or
► to enter:
RECORD MODE
MUX
30P
30P
NORMAL RECORD FPS
ALARM RECORD FPS
Use the ▲ or ▼ button to select items.
Press the ◄ or ► button to confirm the
selection.
ALARM RECORD DWELL 10SEC
RECORD QUALITY
MOTION MIGRATION
EXIT
HIGH
ON
Press MENU back to SETUP MENU.
1. RECORD MODE
MUX/QUAD
Use ◄ or ► button to select MUX (multiplexer) or OD (QUAD) recording.
NORMAL RECORD FPS 1/2/3/4/5/7/10/15 & 30P
Use ◄ or ► button to select recording speed. 15P means 15 fields per second, 30P
is the highest speed, and 1P is the lowest. There are 1 / 2 / 3 / 4 / 5 / 7 / 10 / 15 &
30 you can choose, NTSC default 15P, PAL at 12P.
2. ALARM RECORD FPS
1/2/3/4/5/7/10/15 & 30P
Use ◄ or ► button to select alarm recording speed when external alarm or motion
detection is triggered. There are 1 / 2 / 3 / 4 / 5 / 7 / 10 / 15 & 30 you can choose,
NTSC default 30P, PAL at 25P.
3. ALARM RECORD DWELL
1~30SEC
Use ◄ or ► button to set the dwell time for alarm recording when external alarm or
motion detection is triggered. There are a total of 30 speeds you can choose from 1
to 30. When external alarm is triggered and within the dwell period: the screen will
be switched into quad mode. The corresponding camera will be marked ID "EXT" or
"ALM", default 10 seconds..
4. RECORD QUALIT
BEST/HIGH/MEDIUM/LOW
Use ◄ or ► button to select the BEST, HIGH, MEDIUM or LOW setting so there is a
total of four levels of recording quality that can be chosen from. Higher quality &
higher the amount of storage will be consumed. Thus, this setting should be
carefully chosen as it will affect the usage of hard disk storage. A table at cheap 6
for relationship between quality, recording speed and hard disks is attached for
reference.
5. MOTION MIGRATION
ON
Use ◄ or ► button to select add detected motion into event list or not, and the
default setting is on
10
Download from Www.Somanuals.com. All Manuals Search And Download.
5. ALARM SETUP
ALARM SETUP
Press ▲ or ▼ key on "ALARM SETUP" & ◄ or ►
to enter:
[BUZZER]
BUZZER DWELL
VIDEO LOSS ALARM
MOTION ALARM
EXTERNAL ALARM
5SEC
ON
OFF
ON
Use the ▲ or ▼ button to select items.
Press the ◄ or ► button to confirm the
selection.
[RELAY]
VIDEO LOSS ALARM
MOTION ALARM
EXTERNAL ALARM
ON
ON
ON
Press MENU to go back to SETUP MENU.
EXTERNAL SENOR SETUP
ALARM DISPLAY MODE
EXIT
OFF
[BUZZER]
1. BUZZER DWELL
1/2/3 to 30 SEC & CONT
Use ◄ or ► button to set the dwell time for buzzer issue occur. There are a total of
31 periods you can choose from 1 to 30 seconds or "CONT" for constantly.
2. VIDEO LOSS ALARM
Use ◄ or ► button to select video loss alarm function on or off.
3. MOTION ALARM ON/OFF
Use ◄ or ► button to switch function on or off when motion occur.
4. EXTERNAL ALARM ON/OFF
Use ◄ or ► button to switch function on or off when external alarm occurs.
[RELAY]
1. VIDEO LOSS ALARM
Use ◄ or ► button to switch video loss alarm function form relay box.
2. MOTION ALARM ON/OFF
Use ◄ or ► button to switch motion alarm function form relay box.
3. EXTERNAL ALARM ON/OFF
ON/OFF
ON/OFF
Use ◄ or ► button to switch external alarm function form relay box.
EXTERNAL SENOR SETUP
EXTERNAL SENSOR SETUP
Use the ▲ or ▼ button to select channel.
Press the ◄ or ► button to change alarm
type.
CHANNEL-1
CHANNEL-2
CHANNEL-3
CHANNEL-4
EXIT
OFF
NORMAL-OPEN
NORMAL-CLOSE
OFF
Press MENU to go back pervious menu.
Each channel with 3 types for selection:
1. OFF
2. NORMAL-OPEN (DEFAULT)
3. NORMAL-CLOSE
ALARM DISPLAY MODE
ON/FF
During recording & full channel mode, if ALARM DISPLAY MODE is ON, system
would switch to the ALARM or MOTION channel and the period depend on ALARM
RECORD DWELL.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
6. SCHEDULE RECORD
Press ▲ or ▼ key on "SCHEDULE RECORD" & ◄
or ► to enter:
SCHEDULE SETUP
12 15 18 21 24
0
3
6
9
Use the ◄ or ► button to select items.
Press the ▲ or ▼ button to confirm the
selection.
[RIGHT,LEFT] TO MOVE [MENU TO EXIT]
[UP,DOWN] TO SELECT
Press MENU to go back to SETUP MENU.
There are 24 circles in the schedule table, which represent 24 hours.
Every circle has 3 options to select:
O : represents "fully record"
X : represents "no record"
A : represents "alarm record"
Use the ◄ or ►button to select hours.
Press ▲ or ▼ button to select the O / X / A (Fully / No / Alarm Record).
QUICK KEY:
Play Key to switch between O / X / A (Fully / No / Alarm Record) in all hours.
7. EVENT LIST
EVENT LIST
Press ▲ or ▼ key on "EVENT LIST" & ◄ or ►
HDD1: MASTER
to enter:
START TIME: 2005/MAY/16 12:07:00
END TIME: 2005/MAY/16 12:07:30
Use the ◄ or ► button to select items.
>01 RECORD 2005/MAY/16 12:07:00
Press the ▲ or ▼ button to confirm the
02 MOT CH1 2005/MAY/16 12:06:00
03 MOT CH2 2005/MAY/16 12:05:00
selection.
04 POWER 2005/MAY/16 12:04:00
05 ALM CH1 2005/MAY/16 12:03:00
Press MENU back to SETUP MENU.
06 ALM CH2 2005/MAY/16 12:02:00
07 ALM CH3 2005/MAY/16 12:01:00
Use "▲ or ▼" key to select event which needs to be played，location of " > " symbol
will move up and down for indicating current event which been selected.
Press "◄ or ►" key to select events storage from master hard drive or slave hard drive.
When once selection has been made and than press ►PLAY key to start playback.
There are totally 4 different type's event will be recorded:
1. RECORD：Event starts recording by press "REC" key.
2. POWER：When power off or loss, system would add this issue, and "POWER
ERROR DETECTED" would show on screen while boot.
3. ALM CH1：When external alarm was triggered, event up with alarm number.
4. MOT CH1：When motion detection was triggered, event up with alarm number.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Record setup "MOTION EVENT MIGRATION" must at ON.
In the period of alarm record triggered constantly that the a single EVENT LIST item will be
extend while lapsed, thus ENET LIST would show the first triggered channel number on the
list and the recording seconds will be extended .
8. HDD MANAGEMENT
HDD MANAGEMENT
Press ▲ or ▼ key on "NETWORK SETUP" & ◄ or ► to
OVERWRITE ENABLE
HDD FULL WARNING
YES
enter:
10%
MASTER HDD CAPACITY 76GB
Use the ◄ or ► button to select items.
Press the ▲ or ▼ button to confirm the selection.
Press MENU back to SETUP MENU.
MASTER HDD LEFT RATIO 73GB 97%
MASTER HDD FORMAT N/A
SLAVE
SLAVE
SLAVE
EXIT
HDD CAPACITY N/A
HDD LEFT RATIO
HDD FORMAT N/A
N/A
1. OVERWRITE MODE
YES (YES/NO)
Use "◄ or ►" button to enable or disable overwriting when HDD is full. When HDD
overwrite is enabled, the oldest partition on HDD will automatically be reused, and
the oldest images will be overwritten the current images. When overwrite mode is
disabled, the HDD Full Warning percentage selection will be appeared and need to
be configured.
2. HDD FULL WARNING
10% (5% / 10% / 15% / 20%)
Use "◄ or ►" button to select one of the four settings (5% / 10% / 15% / 20%).
The default is 10%. The buzzer will turn on when free space left in the HDD go
below the set value and alarm again when the total free space left going down each
5%.
3. MASTER HDD CAPACITY
The master HDD capacity will be indicated on the screen, it can't be revised.
4. MASTER HDD LEFT RATIO 73GB 97%
76GB
The master HDD left ratio sign will be indicated on the screen, it can't be revised.
5. MASTER HDD FORMAT
Use "◄ or ►" button to enter the MASTER HDD FORMAT menu.
PASSWORD INPUT : _ _ _ _
Use the view control button on the front panel to input the number.
is "1" ,
is "2" ,
is "3" ,
is "4"
When you key in the correct password, the screen will be displayed the following
message:
PASSWORD CORRECT!
13
Download from Www.Somanuals.com. All Manuals Search And Download.
HARD DISK FORMATTED
Otherwise, the following error message will be displayed on the screen:
PASSWORD INCORRECT!
CHANGE PASSWORD:
Please refer to page 2 SYSTEM SETUP ->CHANGE PASSWORD.
6. SLAVE HDD CAPACITY
N/A
The slave HDD capacity sign will be indicated on the screen, it can't be revised. HDD
N/A is with no HDD.
7. SLAVE HDD LEFT RATIO
N/A
The slave HDD left ratio sign will be indicated on the screen, it can't be revised.
HDD N/A is with no HDD.
8. SLAVE HDD FORMAT
Same with MASTER HDD FORMAT.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
9. LOAD DEFAULT
DEAFULT SETUP
Press ▲ or ▼ key on "DEAFULT SETUP" & ◄ or ► to
enter:
SET FOR ALL
SYSTEM SETUP
CAMERA SETUP
RECORD SETUP
ALARM SETUP
EXIT
OFF
OFF
OFF
OFF
OFF
Use the ◄ or ► button to select items.
Press the ▲ or ▼ button to confirm the selection.
Press MENU back to SETUP MENU.
1. SET FOR ALL
ON/OFF
Use W or X button to change all item in ON , OFF or "---" by individual
2. SYSTEM SETUP ON/OFF
Use W or X button to ON for restore to default setting or OFF.
3. CAMERA SETUP ON/OFF
Use W or X button to ON for restore to default setting or OFF.
4. RECORD SETUP ON/OFF
Use W or X button to ON for restore to default setting or OFF.
5. ALARM SETUP ON/OFF
Use W or X button to ON for restore to default setting or OFF.
6. CONFIRM AND EXIT
After setting above items and pressW or X button back to default setup, otherwise
by MENU key back to main menu.
While changed setting & exit DEFALUT, a dialog would show up and ask to
confirm the setting.
ARE YOU SURE...
>NO
YES
10. EXIT
Exit from the SETUP MENU.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 4
OPERATION PROCEDURES
1
Getting Started with your machine
Please assure the following instructions before you switch on the machine:
1.1 Voltage check: Before power cable is connected, please check the voltage of this
appliance against the supply.
Input voltage range 100~240V, frequency range 47-63Hz.
CAUTION - Damage would be caused if incorrect power voltage applied.
1.2 Hard Disk connection: Make sure the 40-Pin Hard Disk Data cable and the 4-Pin
power connectors are properly connected.
2
Recording
2.1 Press the REC key to enter the Recording Mode. And press the ꢀSTOP key to
stop recording.
2.2 On information bar the "MUX" or "QUAD sign will be indicated on the screen, it
means you select MUX or QUAD recording.
2.3 "15P" sign will be indicated in top right corner on the screen, it mean the
recording speed you selected. 15P means 15 fields per second.
2.4 O" sign will be indicated in center corner on the screen, it means the marked
channel is recorded.
2.5 For more information on Setting up Recording Mode, refer to Chapter 3 Record
Setup
2.6 In Recording Mode, if there is a power failure or power lost for any reasons that
cause a shut down of this machine, it will be back to the Recording Mode
automatically when power restored.
3
Playback
Press the ►PLAY button to
into playback mode, There
PLAYBACK TYPE SELECT
are two ways for searching
for video records, use "▲"
>TIME SEARCH
or "▼" key to select a way
for searching, there are two
selections "TIME SEARCH"
and "EVENT LIST". Arrow
mark ">" indicates current
selection, press "◄" or "►"
key to start the search.
EVENT LIST
EXIT
PRESS [UP，DOWN] TO MOVE [MENU] TO EXIT
[RIGHT,LEFT] TO SELECT
16
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1 Time Search：
TIME SEARCH
HDD1: MASTER
START TIME: 2005/MAY/04 08:00:00
^
HARD DRIVE: MASTER
START TIME：2005/MAY/03 08:12:03
END TIME：2005/MAY/04 10:10:55
HARD DRIVE: SLAVE
START TIME：N/A
END TIME：N/A
[RIGHT/LEFT] TO MOVE [UP/DOWN] TO CHANGE
[PLAY] TO PLAY [QUAD] CHANGE HDD [MENU] EXIT
When entered "TIME SEARCH" mode, by QUAD key change hard disk, screen will
indicates the earliest record on corresponding hard drive with title "START TIME"
and "END TIME". Use "◄" or "►" keys to setup condition for time search, an arrow
mark "^" will show up on corresponding location for adjustment. Use "▲ "or "▼
"keys to increases or decrease value for search condition on time or date. Press
►PLAY key to start playing back.
3.2 Event List：
EVENT LIST
HDD1: MASTER
START TIME: 2005/MAY/16 12:07:00
END TIME: 2005/MAY/16 12:07:30
>01 RECORD 2005/MAY/16 12:07:00
02 MOT CH1 2005/MAY/16 12:06:00
03 MOT CH2 2005/MAY/16 12:05:00
04 MOT CH3 2005/MAY/16 12:04:00
05 ALM CH1 2005/MAY/16 12:03:00
06 ALM CH2 2005/MAY/16 12:02:00
07 ALM CH3 2005/MAY/16 12:01:00
PRESS [UP/DOWN] TO MOVE [PLAY] TO PLAY
[QUAD] TO CHANG HDD
[MENU] TO EXIT
When entered "EVENT LIST" mode, we needs to choose a hard drive to start search
for recorded data. Use QUAD key to choose a hard drive to start. Screen will
indicates the event list on corresponding hard drive with the event type, start date
& time. Use "▲"or "▼" keys to setup condition for time search, an arrow mark ">"
will show up on corresponding location for adjustment. Use "▲ "or "▼"keys to
select the event item, and press ►PLAY key to start playing back.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 Several ways to perform playback:
3.3.1Press ►PLAY button to play video forward.
3.3.2"PLAY" sign will be indicated in top left corner on the screen.
"MUX or QUAD" sign will be indicated in top right corner on the
screen, it means the recording mode you selected.
3.3.3When playback reaches the vary end of record and "END"will appear.
Press
rewind mode.
3.3.4Press F.Fwd Search button to play video forward at high speed. Press
Rew Search button to play video reverse at 16 times speed fast
the button again speed will be change circulative from ×4, ×8, to the
highest ×16.
3.3.5"REW" or "FF* 4 / 8 / 16" sign will be indicated in top left corner on the
screen.
3.3.6Press
Pause button to pause (field by field) for forward. This function
can be used in full screen and quad mode.
(If you choose QUAD in recording mode than it can't playback in full
single channel screen).
3.3.7"PAUSE" sign will be indicated in top left corner on the screen.
Press the ꢀSTOP button to leave playback mode and resume to Live Mode.
When overwrite mode is enabled with 2 hard drives, drive which is overwriting will
cause recording time being divided to 2 periods as picture below:
TIME SEARCH
HDD1: MASTER
START TIME: 2005/MAY/04 08:00:00
^
HARD DRIVE: MASTER
START TIME：2005/MAY/05 08:12:03
END TIME：2005/MAY/05 10:10:55
HARD DRIVE: SLAVE
START TIME：2005/MAY/03 08:12:03
END TIME：2005/MAY/04 10:10:55
[RIGHT/LEFT] TO MOVE [UP/DOWN] TO CHANGE
[PLAY] TO PLAY [QUAD] CHANGE HDD [MENU] EXIT
There will be 2 periods of time as RECORD SEGMENT 1 and RECORD SEGMENT 2 in
master drive which means the oldest data and newest data both existing on the
same hard drive. Above rules will also apply to slave hard drive.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Hard disk
Maximum 2 pieces and at lease one hard disk should be connected, the capacity of
hard disk from 40GB to 400GB for each.
When you restart the power of this appliance after install or replace new hard disk it
will format automatically, we tested the following model for your reference:
Brand
Model
Capacity
80GB
Speed (rpm)
7200 rpm
7200 rpm
7200 rpm
7200 rpm
7200 rpm
7200 rpm
7200 rpm
7200 rpm
Seagate
Seagate
Seagate
Seagate
Maxtor
Maxtor
Maxtor
Maxtor
ST380011A
ST3120023A
ST3160023A
ST3400832A
6Y120L0
6Y080L0
6Y160P0
7Y250P0-A
120GB
160GB
400GB
120GB
80GB
160GB
250GB
We DO NOT suggest Samsung \ Western Digital \ Maxtor DiamondMax 10 series hard drive
base on technical examination.
5 VCR
1. VCR Backup
The DVR Provides composite signal output for back-up use. You can keep the Image
data, and simply just connected BNC connector, at the Back Panel of, with MONITOR
OUT Connector. Press VCR REC button, after decided what recording data need to keep,
during Play-Back Mode.
6 Alarm control
There are three types of alarms that the system can be configured to handle. They are
1.External Alarm, 2.Video Lost Alarm and alarm of 3.Motion Detection.
When alarm are triggered, it changes recording speed to the alarm recording speed.
Video Lost alarm is enabled as default and cannot be changed. The buzzer will action
and "V.LOSS" sign will be indicated on the screen.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
7 External alarm connector
External alarm functions only when DVR has been set under recording mode. 4 input
ports to receive signals from external alarm and GND port for termination. When
external alarm is triggered, currents will be grounded through GND port to activate the
external alarm.
a. Texts "ALM" will be displayed on OSD corresponding channel.
b. Relay action.
c. Recording speed will be switch from normal mode to alarm mode (refer to chapter
4 about recording setting).
d. If setting "A" has been set in schedule recording, will only perform recording when
alarm is triggered during schedule "A" period.
Terminal connector：
Pin 1-4 ----- ALARM1-ALARM4，Camera alarm input.
GND
N.C
----- GND
----- Relay N.C，Alarm output N.C
----- Relay COM
COM
N.O
----- Relay N.O，Alarm output N.O
20
Download from Www.Somanuals.com. All Manuals Search And Download.
8 VGA Output
VGA output is optional, please ensure that you have proper DVR model for VGA out put
installation. By D-SUB connecter to CRT or LCD monitor, DIP switch definition &
suggestion table as below:
Resolution
640×480
800×600
1024×768
1280×1024
DIP1
DIP2
0
0
1
1
0
1
0
1
Frequency
56Hz
DIP3
DIP4
0
0
1
1
0
1
0
1
60Hz
70Hz
75Hz
DIP1 DIP2 DIP3 DIP4 Resolution Frequency
Monitor
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
60
15 inch or
below
640×480
72
75
56
60
72
75
15 inch or
below
800×600
1
1
1
1
1
1
1
1
0
0
0
0
1
1
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
60
1024×768
1280×1024
15~17 inch
70
75
17 inch or
above
60
21
Download from Www.Somanuals.com. All Manuals Search And Download.
9 RS-485 control protocol
Data format
Data: 1 Byte / Parity: None / Start bit: 1 / Baud: 9600
Totally 3 bytes in data frame:
1. Byte=0x10
Byte=0x80+ID Number
2. Byte=Refer to below table
:Broadcasting DVR
:Remote Control DVR (ID number range: 5~21)
:Command for each key string
3. Byte=First byte plus Second byte :Command for confirm checksum
Part
5
Label
REC
CH1
CH2
CH3
Command
0x21
6
0x11
7
0x12
8
0x13
9
CH4
CHALL
COPY
0x14
0x15
NONE
0x3A
0x51
0x3D
0x3E
0x52
0x31
0x32
0x20
0x33
0x35
10
11
12
13
14
15
16
17
18
19
20
21
RFAST
STOP
PAUSE
FFAST
PLAY
UPRT
DNLT
MENU
LEFT
SELECT (ENTER)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 5
SPECIFICATIONS
Image System
Resolution
NTSC
PAL
Display
Record
720×480
640×224
720×576
640×272
Video Input
BNC × 4
BNC × 4
BNC × 2
RCA × 1
RCA × 1
Video Looping output
Video Output
Audio Input (option)
Audio Output (option)
Display Frame
4 × 30 fields/sec
Max 30 fps
4 × 25 fields/sec
Max 25 fps
Recording Frame Rate (QUAD)
Recording Frame Rate (MUX)
Storage Media
Max 30 / 4 fps
Max 25 / 4 fps
Max 2 IDE Hard Disks / 1 Hard Disk & 1 CDRW
M-JPEG
Image Format
Low：8K bytes/field
High：15K bytes/field
Medium：10K bytes/field
Compress Rate
Recording Mode
Playback Speed
Best：20K bytes/field
Manual / Alarm / Schedule
Fast Forward ×4 ×8 ×16 / Fast Reverse ×16
Frame by Frame Forward Playback
On Screen Display & Setup
Alarm Input
Relay Output
Password Control
Event List
Time/Date/Setup Menu
×4
NO or NC Programmable Contact ×1
One for HDD format
Max. 63 records/H.D.D
Motion Detection
Buzzer
Yes
Yes
Video loss
Yes
Yes
Key Lock
Backup
Optional CF Card / CDRW (Network Function)
Optional
VGA out put
Power Input
Voltage
AC 100-240 V Input ( 47-64 Hz )
110V 180ma / 220V 95ma
55mm (H) × 432mm (W) × 321mm (D)
4.5kg (w/o H.D)
Dimensions
Weight kg
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6
RECORDING TIME LENGTH
Recording time length is related to recording speed and recording quality. Tables below are
offered for your reference.
Record Mode=MUX
Record Mode=QUAD
Recording length under quad mode will shorter than multiplex mode and PAL will shorter
than NTSC.
80GB H.D.D Record Mode=MUX
NTSC Field/Sec
30/FS 15/FS 10/FS 7/FS 5/FS 4/FS 3/FS 2/FS 1/FS
maximum 38 hr
76 hr 114 hr 160hr 228hr 285hr 380 hr 570 hr 1140hr
high
57 hr 114Hr 171hr 240hr 342hr 428hr 570 hr 855 hr 1710hr
Recording
Quality
medium 71 hr 142hr 213hr 298hr 426hr 532hr 710 hr 1065hr 2130hr
low
100hr 200hr 300hr 420hr 600hr 750hr 1000hr 1500hr 3000hr
80GB H.D.D Record Mode=QUAD
NTSC Field/Sec
30/FS 15/FS 10/FS 7/FS 5/FS 4/FS 3/FS 2/FS 1/FS
maximum 19 hr
high 29 hr 57 Hr 87 hr 120hr 171hr 214hr 285hr 426hr 870 hr
medium 35 hr 70 hr 105 hr 148hr 213hr 266hr 350hr 532hr 1050hr
38 hr
57 hr
80 hr 114hr 142hr 190hr 285hr 570 hr
Recording
Quality
low
50 hr 100 hr 150 hr 208hr 300hr 375hr 500hr 750hr 1500hr
80GB H.D.D Record Mode=MUX
PAL Field/Sec
25/FS 12/FS
8/FS
6/FS
4/FS
3/FS
2/FS
1/FS
maximum 35 hr
72 hr
95 hr
110 hr 145 hr 218 hr 291 hr 437 hr 875 hr
144 hr 190 hr 287 hr 383 hr 575 hr 1150 hr
high
medium
low
46 hr
67 hr
98 hr
Recording
Quality
139 hr 209 hr 278 hr 418 hr 558 hr 837 hr 1675 hr
204 hr 306 hr 408 hr 612 hr 816 hr 1225hr 2450hr
80GB H.D.D Record Mode=QUAD
PAL Field/Sec
25/FS 12/FS
8/FS
37 hr
50 hr
72 hr
6/FS
50 hr
66 hr
95 hr
4/FS
3/FS
2/FS
1/FS
maximum 12 hr
25 hr
33 hr
48 hr
70 hr
75 hr
100 hr 150 hr 300 hr
high
medium
low
16 hr
23 hr
34 hr
100 hr 133 hr 200 hr 400 hr
143 hr 191 hr 287 hr 575 hr
Recording
Quality
106 hr 141 hr 212 hr 283 hr 425 hr 850 hr
CF Card Backup time
Capacity=128M
Single Image file size
Single picture JPEG file
Video clip AVI file
25 minute
40K
50K
60K
3100 fields
2500 fields
2000 fields
20 minute
16 minute
24
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 7
HARD DRIVE INSTALLATION PROCEDURES
1. Hard drive jumpers need to be set properly in order to make DVR function correctly.
2. Instructions below are for second hard drive installation. If you prefer to have only one
drive, please ignore instruction below. Remove DVR top cover by taking out screws
from location shown below:
①
.
②
④
③
⑤
⑥
3. Below picture indicates DVR which one without a H.D.D installed.
4. Please refer to the instruction from hard drive manufactory for correct jumper setting
on (master /slave) mode of the hard drive, mounting the hard drive over DVR base by
facing IDE interface to DVR main board. Match screw holes from bottom to bottom of
hard drive and the DVR. Turn over the DVR from top to bottom side and then mounting
up the hard drive by using screws from attached accessory pack as picture below:
25
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Hooking up IDE cable and power cable to the hard drive as picture below, please take a
note on that the red line on IDE cable must be next to power cable in order to have
correct instillation.
6. This DVR supports maxima 2 hard drives, please take a note on cable length that you
use to hook up with the hard drive.
7. Restore top cover then hook up with power and monitor a hard drive status message
will appear if it's been installed successful.
8. Up with power and monitor a hard drive status message will appear if it's been
installed successful.
Attentions：
1. Hard drive master and slave mode must be set correctly.
2. Primary hard drive must be set as master and slave for secondary.
3. Make sure power cable is unplugged before hard drive installation starts.
4. IDE cable and power cable must be hooking up correctly.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
a11633RM4F17
Download from Www.Somanuals.com. All Manuals Search And Download.
|