90379 Digital Camera
Owner’s Manual
© 2005 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you for purchasing a 90379 digital camera. Everything you need to take quality Digital Photos is included
with your camera. Please read this manual carefully FIRST in order to get the most out of your digital camera.
Key Features
• 3.1 mega pixel camera with choice of 3 digital camera resolutions - 2048 x 1536 Pixels,1600 x 1200 Pixels
(UXGA), 640 x 480 Pixel (VGA)
• 2 Web Cam resolutions – 640 x 480 pixels (VGA), 320 x 240 pixels (QVGA)
• 1.1 Inch CSRN Color LCD Monitor and photo viewer
• 16MB internal memory
• SD Memory Card Slot accepts any size SD compatible memory cards
• Built in Flash
• Camera can be used as a web cam for video conferencing and IM (instant messaging).
• PhoTags Express software for managing and enhancing your photos, printing, sending photos by e-mails and
much more.
PLEASE READ THIS MANUAL CAREFULLY FIRST in order to get the most out of your camera.
What your camera includes:
• Camera
• Strap
• CD containing Camera Driver Installation and PhoTags Express Photo Management Software
• USB Cable
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer System Requirements
To be able to download photos to your PC you will need the following minimum configuration:
• Pentium II 300 MHz, AMD Athlon 300 MHz, or a Celeron 400 MHz or higher
• Windows 98 SE/ME/2000/XP
• 125MB free hard disk space or above, 32MB or more RAM
• Available USB Interface
• CD-ROM Drive
• Color Display - At least 800x600 resolution
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Look at Your Camera
Front
Back
5
Download from Www.Somanuals.com. All Manuals Search And Download.
The Multi Function LCD Screen and Monitor
The LCD Screen has multiple functions:
You can use it to compose your photo instead of the viewfinder
Preview photos and Videos you have taken
Select the many modes and options built into the camera from the interface screen
Below you will see an illustration of all the different icons that will appear from time to time in the LCD screen
display in the interface mode. How to use each of there icons and features will be explained later in the manual
in the appropriate sections.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Icons on the LCD Screen
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Selection Control Buttons
These buttons are found on the back of your camera. They are used in different combinations to change the
modes and mode options that will displayed in the LCD screen. Directions are provided under the heading for
each mode of operation.
Setting up your Camera for Use
The Battery
Your camera includes a lithium battery that will last for years. Although the battery is removable, we do not
recommend that you do so unless the battery needs replacement. Removing the Battery will result in the
erasure of the photos stored in camera’s internal memory.
WARNING: Opening the battery compartment and/or removing the battery may erase the photos
currently stored in the camera. Download your photos as often as possible. Photos may be lost when
the battery runs low.
1. Please charge your camera for at least two hours before using it for the first time. Connect it to the computer
with the USB cable provided and then turn on your computer. The camera will conveniently charge while the
8
Download from Www.Somanuals.com. All Manuals Search And Download.
computer is on, eliminating the need for a separate charger. You can't take photos when the camera is
connected to the computer.
2. When the Low Battery icon
is flashing, you need to recharge the camera.
3. If you choose, you may also charge your camera with an optional 5V AC adapter (not included). Plug one
end of the adapter into the DC socket on the camera. Make sure the adapter is plugged in securely. Then plug
the other end of the adapter into a wall outlet.
We recommend that you use an optional SD memory card. Photos stored in this manner will not be lost
regardless of any change in the battery power. To order the optional AC adapter or replacement battery, please
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing PhoTags Express Software & The Camera Driver
Insert the CD into your CD-ROM drive. Make sure that your camera is NOT connected to the computer.
Insert the Software CD that came with your camera into the CD-ROM drive.
In a few seconds the “Install your camera software” screen will appear.
Select your camera model from the drop down list and click the “Install” button to install PhoTags Express
followed by the installation of PhoTags Web Cam Express and your camera driver.
Please review the license terms and click the
On the “PhoTags Express" screen, click the
“Agree” button to continue.
“Next” button.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
This will automatically launch the Install shield for
the camera driver. Click “Next” to continue.
Let the “PhoTags Express” installer create the
folder where the program will be installed to, and
then click “Install”.
Once the program has finished installing you will
be asked to restart your computer. Please do so.
Click “Finish” to let the “PhoTags Express”
installer finish the installation program.
Congratulations!! You have successfully installed the “PhoTags Express” software, the “PhoTags WebCam
Express” and the Camera Driver.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting Your Camera
Press and hold the POWER/MENU button
for 3 seconds to start the camera. The camera will make a
single “beep” sound and then the LCD screen will light up with a blank screen and then switch to the active
mode ready for taking photos.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking Photos
Before you Start taking photos here are a few things to review:
Set the Camera Frequency for Florescent Lighting
Florescent lighting oscillation can affect the quality of your photo. It is important to set the camera for the correct
frequency for the country that you are in. The camera has 2 Frequency settings, 50 HZ for the U.S. and Asia
and 60 HZ for Europe and Japan. The default setting is 50Hz.
To set the camera to the European frequency (60Hz):
1. Press POWER/MENU
2. Press FLASH/SET
.
3. Repeatedly press POWER/MENU
to select the icon
shown on the LCD screen.
4. Press
or
to select the icon 60Hz
shown on the LCD screen.
5. Press FLASH/SET
. The default setting (50Hz) is now changed to 60Hz.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
To set the camera the USA and Asia Frequency (50Hz) :
1. Repeat Steps 1-3.
2. Press
or
to select the icon 50Hz
as shown on the LCD screen.
3. Press FLASH/SET
. The camera frequency will now be reset 50Hz.
Turning Off the Camera
There are two ways to turn off your camera, either by using Manual mode or Auto Shut-off.
Manual Shut-Off
To turn off the camera, simply press and hold the POWER/MENU button
make 3 rapid “beep” sounds before turning off.
for 3 seconds. The camera will
Auto Shut-Off
The Auto Shut-Off is a special battery-saving feature which allows the camera to turn itself off when not in use.
After 60 seconds of non-use, the camera a will make 3 rapid “beep” sounds and then automatically shuts down
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo Resolution and Quality
The Image size
and quality
settings determine the number the number of photos and the amount
of memory required for each photo. The higher the image size and the resolution, the more memory each photo
will use. The image size and quality will also affect the maximum size you can print your photo effectively.
Your camera has 16 Megabytes of internal memory, stored in the built-in memory card. The following table tells
you how many photos can be taken based on the Image Size and Quality Settings:
Image Size
Standard Quality High Quality
640 x 480 (VGA)
1600 x 1200 (UXGA)
2048 x 1536 (QXGA
156 photos
22 photos
14 photos
109 photos
15 photos
10 photos
NOTE: To increase the number of photos your camera can take and store, use an external “SD” compatible
memory Card (not included). SD cards come in a variety of capacities from 16 MB up to 2 GB. Please refer to
the INSTALLING AN OPTIONAL MEMORY CARD section of this manual for more information.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Image Size/ Resolution
To set the Image size/Resolution of the photos you want to shoot:
1. Press the POWER/MENU
button.
button.
to select the resolution icon
2. Press the FLASH/SET
3. Press
or
shown on the LCD screen.
for Normal,
4. The resolution will be set according to which icon you choose -
low.
for High,
for
5. Press the FLASH/SET button
.The photo resolution is now changed.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Photo Quality
The quality of your photos also affects the number of shots you can take. The HIGH setting means you can take
fewer photos, but they will be of better quality. The camera features two settings, STANDARD and HIGH.
To change the photo quality from STANDARD to HIGH:
1. Press the POWER/MENU
2. Press the FLASH/SET
button.
button.
button again to select the quality icon
3. Press the POWER/MENU
(Shown above)
shown on the LCD screen.
4. Press the
or
button to select the
icon shown on the LCD screen.
5. Press the FLASH/SET
button. The photo quality is now set to HIGH.
To change the photo quality from HIGH to STANDARD:
1. Press the POWER/MENU
2. Press the FLASH/SET
button.
button.
3. Press the
button again to select the quality icon
shown on the LCD screen.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press the
or
button to select the
icon shown on the LCD screen.
Press the FLASH/SET
button. The photo quality is now set to STANDARD.
Taking Photos
Hold the camera steadily and press the shutter button to take photo. The flash Indicator light will turn red and
there will be a short delay while the camera saves the photo to memory. First this icon will appear followed by
the “photo saved”
and a beep. Do not move the camera until you see this
icon.
The numbers of photos left to shoot is briefly displayed in large white numbers in the center of the LCD screen
when it returns to the icon mode, after each photo is shot. You will hear another beep which indicates that the
camera is ready to take another photo.
When the camera's memory -- photo capacity -- is full, the LCD MONITOR will display “0”. If you attempt to take
a photo when the memory is full the camera will “beep” continuously. The photo will not be stored once the
memory is full. You need to delete photos (either one or all) in order to take additional photos (see Delete Mode
later in this manual).
Setting The Flash
In low light conditions it is best to use the built-in flash. You can also use the flash to compensate for backlight
conditions.
To set the flash:
1. Please make sure that the camera is on.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press FLASH/SET or
. The icon
will appear on the LCD screen. This means the flash function has
been " "Always On" (manual flash).
3. Press FLASH/SET or
automatic flash.
repeatedly. Select the icon
shown on the LCD screen. This will activate the
4. Press FLASH/SET or
until the flash icon
disappears. This will turn off the flash function.
NOTE: When the flash is set to either” Always On” or “Automatic” the flash indicator light will turn GREEN.
When you take a photo the flash indicator light will turn RED. You must wait until the light turns back to GREEN
before you can take another photo.
The Self-Timer
You can include yourself in the photo by using this feature to delay the time between your pressing the shutter
and when the photo is actually taken. It is recommended that you use a tripod when you use the self timer.
1. Press the POWER/MENU button
repeatedly to select the icon
shown on the LCD screen.
2. Make sure to press the shutter within 5 seconds. The timer lasts approximately 10 seconds before the photo
is taken.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: The camera will return to standby mode if you do not press the shutter within 5 seconds after selecting
the icon.
Taking Videos
You can take video clips with your camera. The internal 16MB of memory in your camera can record up to a
total of 3 minutes of video based on how much memory is available at the time.
To take videos:
1. Press the POWER/MENU button repeatedly until you see the
icon on the LCD screen.
2. Press the shutter within 5 seconds. The Flash Indicator/Camera ready light will continue to flash.
3. To end recording the video, press the shutter button again.
NOTE: The video will be saved in AVI format. Shooting time varies depending on the available space
in your camera's memory. Both the
icon and the shooting time are displayed on the LCD screen.
Please also note that the camera can only take motion videos WITHOUT audio (sound).
Playback /Review Mode
You can view all the photos and videos you have taken on the camera’s LCD screen.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
To put the camera into the playback mode:
1. Make sure that the camera is on.
2. Press PLAYBACK / PREVIEW or the
button on the camera.
3. Press the shutter. The photos will play back automatically one by one.
4. To play back the photos from first to last, press the
5. To play back the photos from last to first, press the
button.
button.
NOTE: The icon NO PICTURE will be displayed on the LCD screen if there are no photos in the camera.
Delete Mode
You can delete unwanted Photos and Videos at any time to free up memory. You can delete one photo or
Video at a time or delete all the Photos and Videos that are currently recorded on the memory card all at once.
To delete one image in your camera:
1. Press the PLAYBACK
2. Press the button or
button. You will see the photos you have already taken.
button until you find the photo you wish to delete.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press the FLASH/SET
button. You will see the Delete
icon in the center of the LCD screen and
the camera will beep continuously.
4. Press the shutter within 5 seconds. The photo will be deleted.
To delete all the images in your camera:
1. Repeatedly press the POWER/MENU button until you see the icon on the LCD screen.
2. Press the Shutter within 5 seconds. The digits will keep flashing.
3. Press the Shutter button a second time, again within 5 seconds. All of the photos in the camera will be
deleted.
Installing Optional Memory Card
Your camera has a memory card slot that enables you to insert any “SD” compatible memory card. Adding a
memory card will allow you to increase the number of photos you can take at a time before you have to transfer
them to a PC.
To Install an SD memory card:
1. Locate the Memory card Slot
22
Download from Www.Somanuals.com. All Manuals Search And Download.
2. With the back of the camera facing you, insert the memory card as illustrated.
3. Push the card in until you feel the card “click into position” If the card in installed properly the top will be flush
with the surface of the camera.
4. If the External memory card is installed properly the MEMORY CARD Icon will be displayed to the left of the
battery indicator.
5 .When you remove the External memory card the MEMORY CARD Icon will no longer appear on the monitor.
Using An Optional Memory Card
You cannot access the photos stored in the internal memory once the memory card is installed. The Images will
not be lost.
NOTE: It is recommended that you transfer all images stored in the camera’s internal memory to the PC before
you install an optional external SD memory card.
When the memory card is installed all the cameras modes, camera functions and settings will now apply to the
memory card including:
Photo resolution
Photo Quality
Delete Images
NOTE: The number of Photos and the length of Videos that can be stored on a memory card will depend on the
size of the memory card inserted. The LCD Display will indicate how many are available when MENU/POWER
button is selected.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring Images to your PC
Transfer Images Using PhoTags Express
4. The “Camera/Removable Media Auto Detect”
window will automatically appear on your PC
screen.
5. The number of pictures and other media (videos
included) on the camera or memory card will
appear on the window.
1. Make Sure that the camera is in the Digital
Camera Mode (See page 29)
6. Click “OK” if you want to transfer the photos and
save them to your computer. The “PhoTags
Express” application you installed will open in the
“Get photos” wizard mode and will ask you to
select the photos you want to transfer.
2. Plug one end of the USB cable into the USB
port on the left side of the camera. The port is
located just above the DC 5V outlet.
2. Plug the other end of the USB cable into a USB
port on your computer.
Select your photos and click “Next” to continue.
3. If the Camera is off it will automatically be
turned on when the USB cable is properly
connected and the Transfer mode icons will
appear on the LCD screen.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
place your photos and click the “Finish” button to
copy the photos to your computer.
7. Add Active Captions to your pictures. You can
add a date, keywords, categories and more. Click
“Next” to continue.
9. All of the pictures you imported will appear in
the “Select Photos” main window.
8. On the next screen, choose where you want to
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Photo Download -Get photos manually using “PhoTags Express”
Use the “PhoTags Express” program to import the photos from your camera.
1. Plug one end of the USB cable into the USB slot on your camera.
2. Plug the other end of the USB cable into a USB port on your computer.
3. Make sure that your camera is connected and turned ON.
Double-click the “PhoTags Express” icon
on your desktop to launch the “PhoTags Express” program.
The “Device Selection” mode will appear. Both
your camera and the memory card will each
appear in the “Active Devices” list as a
“Removable Disk”. Toggle between the two
devices to select picture
Click on the “Get Photos” button on the Main
Menu.
This mode is used to manually select the photos
you wish to copy to your computer.
Custom Copy
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Add Active Captions to your pictures. With this
feature, you can add a date, keywords and
categories. Click “Next” to continue.
Select "Custom Copy". Click "Next" to continue.
On the next screen, choose where you want to
place your photos on your computer. Click on
“Finish” to copy the photos to the location you
selected.
Select your photos and click "Next" to continue.
All of the pictures you imported will appear in the
“Select photos” main window.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Express Copy Method
Select this option if you want to have all the images transferred to the PC without the option to select which
photos you want to transfer. In this mode you will not see a preview of the images transferred. For more
information please refer to the Quick Start guide in PhoTags Express.
Transfer Images Directly From Windows
1. Plug one end of the USB cable into the USB slot on your camera.
2. Plug the other end of the USB cable into a USB port on your computer.
3. Make sure that your camera is connected and is turned ON.
4. Click on the START button in Windows.
5. Click on the MY COMPUTER Icon
6. Your memory card will appear as a REMOVABLE STORAGE DEVICE.
7. Click on the REMOVABLE STORAGE DEVICE to view the images. The images are stored in the subfolder
called DCM100.
8. You can now copy and paste the images to any directory you choose.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Videos
Make sure that your camera is connected to your computer with the USB cable. Double-click the “Webcam
Express” icon that is on your desktop to launch the “PhoTags WebCam Express” program.
Select the “Playback” tab and double click on a video in the “Media list” window. The video will appear in the
“Main Window” in the actual size. To play the video, use the video controls.
Setting Your Camera for Use As A Web Cam
When the USB Cable is connected to the PC the Camera can operate in one of two modes.
Mode 1- Transfer photos to the PC
Mode 2- A Web Cam that can be used for video Chat and Video Conferencing on the Internet
NOTE: THE USB CABLE MUST BE DISCONNECTED TO SET THE MODE 1 & MODE 2
To put the Camera into Mode 1- Transfer Photos;
1. Press POWER/MENU
.
2. Press FLASH/SET or
.
3. Repeatedly press POWER/MENU to select the icon
shown on the LCD.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press
or
to select the icon
.
shown on the LCD.
5. Press FLASH/SET or
6. When you plug in the USB cable the Camera will be ready to download photos to the PC.
To put the Camera into Mode 2- Web Cam;
1. Press POWER/MENU
.
2. Press FLASH/SET or
.
3. Repeatedly press POWER/MENU
to select the icon
shown on the LCD.
4. Press
or
to select the icon
shown on the LCD.
5. Press FLASH/SET or
.
6. When you plug in the USB cable the Camera will function as a Web Cam
NOTE: WHENEVER THE CAMERA IS TRUNED OFF THE CAMERA WILL AUTOMATICALLY RESET ITSELF
TO MODE 1- TRANSFER PHOTOS>
NOTE: YOU WILL STILL BE ABLE TO TAKE PHOTOS AND VIDEOS EVEN THOUGH THE CAMERA IS SET
TO MODE 2- WEB CAM.
Web Cam Quick Set
To put the Camera into Web Cam Mode when you start your camera;
Press and hold the shutter down and then while you are still holding the shutter, turn on the camera. Once you
hear the single BEEP you can let go of the shutter.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
The Camera will remain in the Web Cam mode until either you manually set the camera to the Transfer mode or
the camera is turned off.
Using Your Camera As A Web Cam
1. Make sure the Camera is in the Web Cam Mode (Mode 2)
2. Connect the camera to the computer.
3. Open a Web Cam enabled application, such as Instant Messenger or Net Meeting.
4. Position the camera.
Web Cam Express
Now that you have your camera installed you can use it to capture short movies called AVI files. These can be
saved directly to your computer. The length of time you can record an AVI while the camera is connected to
your computer will vary, depending on how much hard drive space you will use to save the file. Please take note
that these AVI files take up a lot of hard drive space. This is done through the PhoTags WebCam Express
program. This next section will walk you though capturing an AVI file.
1. Make sure that your camera is connected via the USB cable to your PC.
2. Double-click the “WebCam Express” icon
that is on your desktop. This will launch the PhoTags
Web Cam Express program.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Adjust your Web Cam to the desired position. The screen will display what the Web Cam "sees".
(To add audio to your video, plug a microphone into your computer.)
4. Click the “Capture” button to start recording the video. The recording elapse time will appear under the video.
5. Click “Pause” to hold the recording. To continue recording click the “Capture” button again.
6. To finish recording click the “Stop” button. The videos will be automatically saved into a default directory.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE:
To learn how to capture JPEG snapshots from your WebCam or from your existing AVI movies, go to
the “Take Snapshots” section in the Quick Start help.
To learn how to change the user settings, go to the “Set User Preferences” section in the Quick Start
help.
•
•
What it does
Basis instructions from Quick Help
Maintenance of Your Digital Camera
The digital camera is an accurate device. Please preserve it and use it properly to avoid damaging it.
Technical Support
software, drivers, and FAQ’s at the website. Can’t find what you are looking for? Fill out an online ticket and one
of our technical support team members will answer questions or call 877-397-8200 or 732-476-5098 to access
our technical support information on the phone. For question on warranty information please email
Appendix A: Technical Specifications
Product Type : Digital camera
Electronic Coupling Element : CMOS Sensor 3.1M Pixels
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Resolution: 2048 x 1536 Pixels (QXGA)
1600 x 1200 Pixels (UXGA)
640 x 480 Pixels (VGA)
Memory Device:
Internal built-in 16MB (SDRAM)
External Memory Card Slot.
LCD Monitor: 1.1 Inch CSTN
Appendix B: Troubleshooting
Q: I have take photos, but my computer says "No photos in camera." What do I do?
First, ensure that you have taken photos with your camera. Press the shutter button a few times to take some
sample photos and try again. If you still get a no photos error, this indicates that the driver is not installed (or not
installed correctly) or you may not meet the minimum system requirements. Reinstall the driver.
System Requirements:
First, ensure that you have at least a Pentium II 300 MHz, AMD Athlon 300 MHz, or a Celeron 400 MHz or
higher as well as at least 64 MB of RAM. Please note that the older AMD K6 processors will not work. More
information about determining your computer's specifications can be found in the General Computer Information
section. If you have determined that you have pictures in your camera and you meet the system requirements,
follow the steps below to reinstall the software.
Software Re-installation
1. First install the software and drivers. Click on Start, Settings, Control Panel and Add/Remove programs.
There are two programs you will need to remove – PhoTags Express and your VGA Dual Camera. After
removing these programs, restart your computer. If your camera is connected, disconnect it.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Now reinstall the software. Insert the CD that came with your camera. It should automatically run the
installation.
3. Restart the computer.
4. Once your computer is back up, plug the camera into your computer's USB port.
5. Right-click on the "My Computer" icon. Select Properties.
If you are running Windows 98, 98SE, or ME: Click on Device Manager.
If you are running Windows 2000 or XP: Click on hardware and then Device Manager.
If the camera is installed correctly, there will be a category listed for "Imaging Devices" and clicking on the "+"
next to it should reveal your camera. If not, you will likely see "Digital Still Camera" under "Other Devices" with a
brightly colored marking next to it indicating it is not functioning correctly.
If you are running Windows 98, 98SE, or ME: Right click on the non functioning device and select Remove.
If you are running Windows 2000 or XP: Right click on the non functioning device and select uninstall. If a
warning pops up, press OK.
6. Restart your computer again. Your camera is now successfully installed.
Q: How do I make sure I don't lose important pictures?
Your camera uses flash memory which requires a constant electric current to store your photos. Should your
camera lose power (for instance if the battery dies or is removed) all stored pictures will be lost. We recommend
always downloading your photos to your computer as soon as possible to prevent unintentional data loss.
Q: I have a MAC. Will this camera work?
Unfortunately, the system requirements for our cameras require a Windows operating system.
There is no Mac driver available and currently no plans to develop one.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
|