OPERATOR’S MANUAL
18 VOLT HEDGE TRIMMER
P2601
ACCEPTS ALL ONE+ BATTERY PACKS
BATTERIES AND CHARGERS SOLD
SEPARATELY
Your hedge trimmer has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SAFETY RULES
Keephands,face,andfeetatasafedistancefrommoving
parts. Do not touch or try to stop the cutting blades when
they are moving.
WARNING!
Read and understand all instructions. Failure to follow
all instructions listed below may result in electric shock,
fire, and/or serious personal injury.
Do not use tool if switch does not turn it on or off. A tool
that cannot be controlled with the switch is dangerous
and must be repaired.
Avoid accidental starting. Be sure switch is in the locked
or off position before inserting battery pack. Carrying tools
with your finger on the switch or inserting the battery pack
into a tool with the switch on invites accidents.
READ ALL INSTRUCTIONS
Know your tool. Read and understand the operator’s
manual and observe the warnings and instruction labels
affixed to the tool.
Avoid dangerous environments. Do not use the tool in
damp or wet locations. Do not operate the hedge trimmer
in rain.
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not use
tool while tired or under the influence of drugs, alcohol,
or medication. A moment of inattention while operating
power tools may result in serious personal injury.
Maintain tools with care. Keep cutting tools sharp and
clean. Properly maintained tools with sharp cutting edges
are less likely to bind and are easier to control.
Do not allow children or untrained individuals to use this
Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may
affect the tool’s operation. If damaged, have the tool
serviced before using. A guard or any other part that is
damaged should be carefully checked to determine that
it will operate properly and perform its intended function.
Many accidents are caused by poorly maintained tools.
unit.
Wear safety glasses or goggles that are marked to comply
with ANSI Z87.1 standards when operating this unit.
Protect your lungs. Wear a face or dust mask if the
operation is dusty. Following this rule will reduce the risk
of serious personal injury.
Keep the tool and its handle dry, clean and free from oil
and grease. Always use a clean cloth when cleaning.
Never use brake fluids, gasoline, petroleum-based
products, or any strong solvents to clean your tool.
Following this rule will reduce the risk of loss of control
and deterioration of the enclosure plastic.
Dress properly. Do not wear loose clothing or jewelry.
Contain long hair. Loose clothes, jewelry, or long hair can
be caught in moving parts.
Wear heavy long pants, boots, and gloves. Do not wear
loose fitting clothing, short pants, or jewelry of any kind.
Do not go barefoot.
Secure long hair so it is above shoulder level to prevent
entanglement in any moving parts.
To avoid the risk of electric shock, do not operate unit in
damp or wet locations.
Use only accessories that are recommended by the
manufacturer for your model. Accessories that may be
suitable for one tool may create a risk of injury when used
on another tool.
Keep all bystanders, children, and pets at least 50 feet
away.
Do not force tool. Use the correct tool for your application.
The correct tool will do the job better and safer at the rate
for which it is designed.
Tool service must be performed only by qualified repair
personnel. Service or maintenance performed by
unqualified personnel may result in a risk of injury.
Do not overreach. Keep proper footing and balance at all
times. Proper footing and balance enables better control
of the tool in unexpected situations. Do not use on a
ladder or unstable support.
When servicing a tool, use only identical replacement
parts. Follow instructions in the Maintenance section of
this manual. Use of unauthorized parts or failure to follow
Maintenance instructions may create a risk of shock or
injury.
Do not operate in poor lighting.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFIC SAFETY RULES
Before starting the hedge trimmer, make sure the blade
MODEL
BATTERY PACK
CHARGER (P113)
is not in contact with any object.
(P104 Li-ion)
1304ꢀ9001, 1304ꢀ900ꢀ
130155001
Stop the unit, remove the battery pack, and make sure
140501001
140501005
the blade has stopped before setting the unit down.
Never cut any material with a diameter larger than
(P100 Ni-Cd)
130ꢀ55004, 130ꢀꢀ40ꢀ8
Pꢀ601
3/8 in.
DANGER: Risk of cut. Keep hands away from blades. Do
not attempt to remove cut material or hold material to be
cutwhenbladesaremoving.Keepbothhandsonhandles
when power is on. Make sure battery pack is removed
andthetriggerisreleasedwhenclearingjammedmaterial
from blades. Do not grasp the exposed cutting blades or
cutting edges when picking up or holding the unit.
BATTERY PACK
CHARGER (P110)
14ꢀ3701, 140ꢀ370ꢀ1,
140ꢀ370ꢀ3
(P100 Ni-Cd)
130ꢀ55004, 130ꢀꢀ40ꢀ8
Batteries can explode in the presence of a source of
ignition, such as a pilot light. To reduce the risk of serious
personal injury, never use any cordless product in the
presence of open flame. An exploded battery pack can
propel debris and chemical. If exposed, flush with water
immediately.
Blades coast after unit is turned off.
Always stop the motor when cutting is delayed or when
walking from one cutting location to another.
Do not charge unit in a damp or wet location. Following
Keep unit clean of grass clippings and other materials.
this rule will reduce the risk of electric shock.
They may become lodged in the cutting blades.
For best results, your battery unit should be charged in a
location where the temperature is more than 50°F (10°C)
but less than 100°F (38°C). Do not store outside or in
vehicles.
Store the unit inside in a dry place, either locked up or up
high to prevent unauthorized use or damage. Keep out
of the reach of children or untrained individuals.
Replace scabbard cover when unit is not in use.
Under extreme usage or temperature conditions, battery
pack leakage may occur. If liquid comes in contact with
your skin, wash immediately with soap and water, then
neutralize with lemon juice or vinegar. If liquid gets into
your eyes, flush them with clean water for at least 10
minutes, then seek immediate medical attention.
Never douse or squirt the unit with water or any other
liquid. Keep handles dry, clean, and free from debris.
Clean after each use; see Storage instructions.
Secure the unit while transporting.
BATTERY SAFETY
Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has been dropped or
received a sharp blow. A damaged battery is subject to
explosion. Properly dispose of a dropped or damaged
battery immediately.
Do not dispose of batteries in a fire. The cell may
explode. Batteries should be recycled. Consult your
local waste authority for information regarding available
recycling and/or disposal options.
Battery operated units do not have to be plugged into an
electrical outlet; therefore, they are always in operating
condition. Be aware of possible hazards even when unit
is not operating.
Removethebatterypackbeforemakinganyadjustments,
cleaning, storing, or removing material from the unit, or
when not in use.
A battery pack must be recharged only with the specified
charger for the battery pack. A charger that may be
suitable for one type of battery pack may create a risk
of fire when used with another battery pack. Use battery
pack only with charger listed.
When battery pack is not in use, keep it away from
other metal objects like: paper clips, coins, keys, nails,
screws, or other small metal objects that can make
a connection from one terminal to another. Shorting
the battery pack terminals together may cause sparks,
burns, or a fire.
To reduce the risk of explosion and possible injury, DO
NOT place battery units or their batteries near fire or
heat.
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If you
loan someone this tool, loan them these instructions also
to prevent misuse of the product and possible injury.
Do not mutilate the battery pack. Released electrolyte is
corrosive and may cause damage to the eyes or skin. It
may be toxic if swallowed.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
NAME
EXPLANATION
V
A
Volts
Voltage
Current
Amperes
Hertz
Hz
W
Frequency (cycles per second)
Watt
Power
hrs
Hours
Time
Alternating Current
Direct Current
Type of current
Type or a characteristic of current
n
o
No Load Speed
Class II Construction
Per Minute
Rotational speed, at no load
Double-insulated construction
.../min
Revolutions, strokes, surface speed, orbits etc., per minute
Wet Conditions Alert
Do not expose to rain or use in damp locations.
Precautions that involve your safety.
Safety Alert Symbol
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Read the Operator’s Manual
Always wear safety goggles or safety glasses with side
shields and, as necessary, a full face shield when operating
this product.
Eye Protection
Keep Bystanders Away
Gloves
Keep all bystanders at least 50 ft. away.
Wear non-slip, heavy-duty protective gloves when handling
the blades.
Hold and operate the hedge trimmer properly with both
hands.
Operate With Two Hands
Moving Parts
Keep hands away from moving parts.
Failure to use in dry conditions and to observe safe practices
can result in electric shock.
Electric Shock
Kickback
DANGER! Beware of kickback.
Sharp cutting blades. To prevent serious injury, do not touch
cutting blades.
Sharp Blade
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result in death
or serious injury.
DANGER:
Indicates a potentially hazardous situation, which, if not avoided, could result in death
or serious injury.
WARNING:
CAUTION
CAUTION
Indicates a potentially hazardous situation, which, if not avoided, may result in minor or
moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property damage.
SERVICE
WARNING:
Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. For
service we suggest you return the product to your nearest
AUTHORIZEDSERVICECENTERforrepair.Whenservicing,
use only identical replacement parts.
To avoid serious personal injury, do not attempt to use
this product until you read thoroughly and understand
completelytheoperator’smanual.Ifyoudonotunderstand
the warnings and instructions in the operator’s manual,
do not use this product. Call Ryobi customer service for
assistance.
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power tool operation, always wear safety
goggles or safety glasses with side shields, or a full face shield when needed. We recommend
Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields.
Always use eye protection which is marked to comply with ANSI Z87.1.
SAVE THESE INSTRUCTIONS
6
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
PRODUCT SPECIFICATIONS
Motor......................................................................18 V DC
Blade Length.............................................................. 18 in.
Cutting Capacity........................................................3/8 in.
Net Weight............................................................... 4.8 lbs.
SCABBARD
FROnT
hAnDLE
GUARD
LOCk-OFF
BUTTOn
BLADES
GripZone®
OVERMOLD
TRIGGER
SwITCh
Fig. 1
SCABBARD
KNOW YOUR HEDGE TRIMMER
See Figure 1.
The scabbard keeps the operator from coming in contact
with the sharp blades when the tool is not in use. It also
helps keep the blades from being nicked or damaged when
the tool is in storage.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
wellasaknowledgeoftheprojectyouareattempting.Before
use of this product, familiarize yourself with all operating
features and safety rules.
LOCK-OFF BUTTON
The lock-off button prevents unintentional starting of the
hedge trimmer.
GripZone® OVERMOLD
GripZone® overmold provides added user comfort.
GUARD
The guard helps to deflect chips or other debris away from
the operator’s hands.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
WARNING:
Do not discard the packing material until you have care-
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
fully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
PACKING LIST
Hedge Trimmer
Scabbard
WARNING:
Operator’s Manual
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
OPERATION
APPLICATIONS
You may use this product for the purpose listed below:
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
Trimming and shaping hedges and shrubbery
This product will accept Ryobi One+ 18 V lithium-ion
battery packs and Ryobi One+ 18 V nickel-cadmium battery
packs.
WARNING:
For complete charging instructions, refer to the Operator’s
Manual for the battery packs and chargers listed in the
General Safety Rules.
Always wear safety goggles or safety glasses with side
shields when operating power tools. Failure to do so
could result in objects being thrown into your eyes result-
ing in possible serious injury.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
TO INSTALL BATTERY PACK
See Figure 2.
Place the battery pack in the hedge trimmer. Align the
raised rib on the battery pack with groove in the hedge
trimmer’s battery port.
BATTERY
PACk
BATTERY
PORT
Make sure the latches on each side of the battery pack
snap in place and that the battery pack is secured in the
hedge trimmer before beginning operation.
CAUTION:
When placing battery pack in the tool, be sure raised
rib on battery pack aligns with the bottom of the tool
and latches into place properly. Improper installa-
tion of the battery pack can cause damage to internal
components.
TO REMOVE BATTERY PACK
See Figure 2.
LATChES
Locate the latches on the side of the battery pack and
depress both sides to release the battery pack from the
hedge trimmer.
Fig. ꢀ
WARNING:
Battery tools are always in operating condition. Therefore,
switch should always be locked when not in use or
carrying at your side.
STARTING THE HEDGE TRIMMER
See Figure 3.
Remove the scabbard.
Press and hold the lock-off button.
Depress the switch trigger.
Release the lock-off button. Continue to depress the
LOCk-OFF
BUTTOn
switch trigger for extended operation.
SwITCh
TRIGGER
Fig. 3
STOPPING THE HEDGE TRIMMER
See Figure 3.
Release the switch trigger to stop the hedge trimmer.
Upon release of the switch trigger, the lock-off button will
automatically reset to the locked position.
HOLDING THE HEDGE TRIMMER
See Figure 4.
The unit has both a front and rear handle. With the blade
directed away from you, hold the unit by both handles.
WARNING:
Always keep both hands on the hedge trimmer handles.
Never hold shrubs with one hand and operate the hedge
trimmer with the other. Failure to heed this warning may
result in serious injury.
Fig. 4
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
OPERATING TIPS
See Figures 5 - 6.
DANGER:
If blade jams on any electrical cord or line, DO NOT
TOUCH THE BLADE! IT CAN BECOME ELECTRICALLY
LIVE AND VERY DANGEROUS. Continue to hold the
hedge trimmer by the insulated rear handle or lay it
down and away from you in a safe manner. Disconnect
the electrical service to the damaged line or cord before
attempting to free the blade from the line or cord. Failure
to heed this warning will result in serious personal injury
or possible death.
Fig. 5
WARNING:
Clear the area to be cut before each use. Remove all
objects such as cords, lights, wire, or loose string which
can become entangled in the cutting blade and create a
risk of serious personal injury.
Before starting the hedge trimmer, hold the unit with both
hands with the cutting blades directed away from you.
Always use the hedge trimmer properly.
Do not force the hedge trimmer through heavy shrubbery.
This can cause the blades to bind and slow down. If the
blades slow down, reduce the pace.
Do not try to cut stems or twigs that are larger than
3/8 in. thick, or those obviously too large to feed into the
cutting blade. Use a non-powered hand saw or pruning
saw to trim large stems.
Fig. 6
Always hold hedge trimmer with both hands when
operating. Use a firm grip on the handles. The unit is used
for cutting in either direction in a slow, sweeping action
from side to side.
If blades do become jammed, stop the motor, allow
the blades to stop and remove the battery pack before
attempting to remove the obstruction.
If desired, you can use a string to help cut your hedge
level. Decide how high you want the hedge. Then, stretch
a piece of string along the hedge at this height. Trim the
hedge just above this guide line of string. Trim the side
of a hedge so that it will be slightly narrower at the top.
More of the hedge will be exposed when shaped this way,
and it will be more uniform.
Wear gloves when trimming thorny or prickly growth.
When trimming new growth, use a wide sweeping action,
so that the stems are fed directly into the cutting blade.
Older growth will have thicker stems and will be trimmed
easiest by using a sawing movement.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
WARNING:
WARNING:
When servicing, use only identical replacement parts. Use
of any other parts may create a hazard or cause product
damage.
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal injury.
Onlythepartsshownonthepartslistareintendedtoberepaired
or replaced by the customer. All other parts should be replaced
at an Authorized Service Center.
WARNING:
Always wear safety goggles or safety glasses with side
shields during power tool operation or when blowing dust.
If operation is dusty, also wear a dust mask.
TRANSPORTING AND STORING
Always place the scabbard on the blade before storing or
transporting the hedge trimmer. Use caution to avoid the
sharp teeth of the blade.
WARNING:
To avoid serious personal injury, always remove the
battery pack from the product before inspecting, cleaning
or performing any maintenance.
Clean the hedge trimmer thoroughly before storing. Store
the hedge trimmer indoors, in a dry place that is inacces-
sible to children. Keep away from corrosive agents such as
garden chemicals and de-icing salts.
GENERAL MAINTENANCE
BLADE REPLACEMENT
When replacing the blade on this unit, use only replacement
blade part no. 3013ꢀ14.
Avoid using solvents when cleaning plastic parts. Most plastics
are susceptible to damage from various types of commercial
solvents and may be damaged by their use. Use clean cloths
to remove dirt, dust, oil, grease, etc.
BATTERIES
BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING
This product will accept Ryobi One+ 18 V lithium-ion battery
packs and Ryobi One+ 18 V nickel-cadmium battery packs.
Length of service from each charging will depend on the type
of work you are doing.
To preserve natural resources, please
recycle or dispose of batteries properly.
This product uses nickel-cadmium and
The batteries for this product have been designed to provide
maximum trouble-free life. However, like all batteries, they will
eventually wear out. Do not disassemble battery pack and
attempt to replace the batteries. Handling of these batteries,
especially when wearing rings and jewelry, could result in a
serious burn.
lithium-ion batteries. Local, state or federal
Li - Ion
laws may prohibit disposal of batteries in
ordinary trash.
Consult your local waste authority for
information regarding available recycling
and/or disposal options.
To obtain the longest possible battery life, we suggest the
following:
For lithium-ion batteries:
Remove the battery pack from the charger once it is fully
WARNING:
charged and ready for use.
Upon removal, cover the battery pack’s terminals with
heavy-duty adhesive tape. Do not attempt to destroy or
disassemble battery pack or remove any of its compo-
nents. Lithium-ion and nickel-cadmium batteries must
be recycled or disposed of properly. Also, never touch
both terminals with metal objects and/or body parts as
short circuit may result. Keep away from children. Failure
to comply with these warnings could result in fire and/or
serious injury.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 80°F
and away from moisture.
Store battery packs in a 30%-50% charged condition.
Every six months of storage, charge the pack as normal.
For nickel-cadmium batteries:
Remove the battery pack from the charger once it is fully
charged and ready for use.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below
80°F.
Store battery packs in a “discharged” condition.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
WARNING:
BLADE
COVER
SCREwS
Blades are sharp. When handling the blade assembly,
wear non-slip, heavy-duty protective gloves. Do not place
your hand or fingers between blades or in any position
where they could get pinched or cut. NEVER touch blades
or service unit with battery pack installed.
REPLACING BLADES
See Figures 7 - 8.
Periodicallyinspectthebladesfordamageandwear. Always
use the manufacturer’s specified replacement blades.
BLADE COVER
Removing the blade:
Remove the battery pack from the hedge trimmer.
Place the hedge trimmer upside down on a workbench
and remove the four (4) blade cover screws.
Remove the blade cover.
Remove the bar plate from the two pins.
Remove the retaining ring, washer, and retaining plate.
Align the cams.
Fig. 7
NOTE: The yokes cannot be lifted unless they clear the
lip of the cams.
BLADE SCREwS
BAR PLATE
Remove the four (4) blade screws.
Each blade has an oval yoke attached at one end. Slide
the blades into position so the yokes align. Remove the
blade from the housing.
RETAInInG
RInG
CUTTER BLADE
ASSEMBLY
wAShER
Installing a new blade:
Before i stalli g a ew blade, apply a lithium-based grease
to the areas indicated.
RETAInInG
PLATE
Align the cams.
YOkES
APPLY GREASE
TO ThESE
AREAS
Place the new blade on the housing and align the yokes
to drop into place. Rotate the blade so that it drops past
the lower cam.
NOTE: When properly aligned, the blade assembly fits in
the recessed slot in the motor housing.
CAMS
Reinstall the four (4) blade screws and tighten securely.
Reinstall the retaining plate, washer, and retaining ring.
Reinstall the bar plate over the two pins.
Install the blade cover using the four (4) blade cover
screws. Tighten securely.
PInS
Fig. 8
WARNING:
Make sure the bottom plate is replaced before inserting
the battery pack and starting the hedge trimmer. Failure
to do so will expose internal parts, which could cause an
accident or electrical shock, resulting in serious injury.
NOTE: If binding occurs after replacing the blade assembly,
repeat the steps under Removing the Blade and Installing
a New Blade.
1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
LUBRICATING THE BLADE
See Figure 9.
Foreasieroperationandlongerbladelife,lubricatethehedge
trimmer blade before and after each use.
Remove the battery pack from the hedge trimmer.
Lay the hedge trimmer on a flat surface. Apply light weight
machine oil along the edge of the top blade.
Ifyouwillbeusingthehedgetrimmerforanextendedperiod,
it is advisable to oil the blade during use.
NOTE: Do not oil while the hedge trimmer is running.
Stop the hedge trimmer.
Remove the battery pack.
Lubricate the hedge trimmer as described above.
Reinstall the battery pack and resume use.
SHARPENING THE BLADE
See Figure 10.
Allow the blades of the hedge trimmer to come to a stop
in the position shown. This will allow clearance for the file
between the cutter teeth and the guard teeth.
Fig. 9
Remove the battery pack from the hedge trimmer.
Clamp the blade assembly in a vise and file the exposed
cutting surface of each blade tooth with an 8 in. smooth
round file, 1/4 in. or 7/3ꢀ in. in diameter. Be sure to retain
the original angle of the tooth when filing.
CUTTInG
BLADE
GUARD
Remove the hedge trimmer from the vise, replace the
battery pack, and restart the hedge trimmer. Allow the
blades of the hedge trimmer to come to a stop so that
the unsharpened edges of the cutter blade teeth are ex-
posed.
Remove battery pack from hedge trimmer and repeat the
sharpening procedure as described above.
Fig. 10
13
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
CLEANING THE HEDGE TRIMMER
Slide the scabbard over the blade.
Remove the battery pack.
Clean dirt and debris from the body of the hedge trimmer,
using a damp cloth with a mild detergent.
NOTE: Do not use any strong detergents on the plastic
housing or the handle. They can be damaged by certain
aromatic oils such as pine and lemon, and by solvents
such as kerosene.
SCABBARD
Moisture can cause a shock hazard. Wipe off any moisture
with a soft dry cloth.
Use a small brush or the air discharge of a small vacuum
cleaner brush to clear dust or debris from the air vents
on the motor housing.
STORING THE HEDGE TRIMMER
See Figure 11.
Clean the hedge trimmer thoroughly before storing. Store
the hedge trimmer in a dry, well-ventilated place that is
inaccessible to children. Keep away from corrosive agents
such as garden chemicals and de-icing salts.
Fig. 11
Always place the scabbard on the cutting blades before
storing.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
LIMITED WARRANTY STATEMENT
A. Tune-ups – Spark Plugs, Carburetor, Carburetor
Adjustments, Ignition, Filters
Techtronic Industries North America, Inc., warrants to the
original retail purchaser that this RYOBI® brand outdoor
product is free from defect in material and workmanship
and agrees to repair or replace, at Techtronic Industries
North America, Inc.’s, discretion, any defective product
free of charge within these time periods from the date of
purchase.
B. Wear items – Bump Knobs, Outer Spools, Cutting
Lines, Inner Reels, Starter Pulleys, Starter Ropes, Drive
Belts,Tines,FeltWashers,HitchPins,MulchingBlades,
Blower Fans, Blower and Vacuum Tubes, Vacuum Bag
and Straps, Guide Bars, Saw Chains
Techtronic Industries North America, Inc., reserves the
right to change or improve the design of any RYOBI® brand
outdoorproductwithoutassuminganyobligationtomodify
any product previously manufactured.
Two years if the product is used for personal, family or
household use;
90 days, if used for any other purpose, such as
commercial or rental.
ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION
TO THE STATED WARRANTY PERIOD. ACCORDINGLY,
ANY SUCH IMPLIED WARRANTIES INCLUDING
MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR OTHERWISE, ARE DISCLAIMED IN
THEIR ENTIRETY AFTER THE EXPIRATION OF THE
APPROPRIATE TWO-YEAR, ONE-YEAR, OR NINETY-
DAY WARRANTY PERIOD. TECHTRONIC INDUSTRIES
NORTH AMERICA, INC.’S, OBLIGATION UNDER THIS
WARRANTYISSTRICTLYANDEXCLUSIVELYLIMITEDTO
THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS
AND TECHTRONIC INDUSTRIES NORTH AMERICA,
INC., DOES NOT ASSUME OR AUTHORIZE ANYONE
TO ASSUME FOR THEM ANY OTHER OBLIGATION.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. TECHTRONIC
INDUSTRIES NORTH AMERICA, INC., ASSUMES NO
RESPONSIBILITY FOR INCIDENTAL, CONSEQUENTIAL,
OR OTHER DAMAGES INCLUDING, BUT NOT LIMITED
TO, EXPENSE OF RETURNING THE PRODUCT TO AN
AUTHORIZED RYOBI SERVICE CENTER AND EXPENSE
OFDELIVERINGITBACKTOTHEOWNER, MECHANIC’S
TRAVEL TIME, TELEPHONE OR TELEGRAM CHARGES,
RENTAL OF A LIKE PRODUCT DURING THE TIME
WARRANTY SERVICE IS BEING PERFORMED, TRAVEL,
LOSS OR DAMAGE TO PERSONAL PROPERTY, LOSS
OF REVENUE, LOSS OF USE OF THE PRODUCT,
LOSS OF TIME, OR INCONVENIENCE. SOME STATES
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU.
This warranty extends to the original retail purchaser
only and commences on the date of the original retail
purchase.
Any part of this product found in the reasonable judgment
ofTechtronicIndustriesNorthAmerica, Inc. tobedefective
in material or workmanship will be repaired or replaced
withoutchargeforpartsandlaborbyanauthorizedservice
center for RYOBI® brand outdoor products (Authorized
Ryobi Service Center).
Theproduct,includinganydefectivepart,mustbereturned
to an authorized Ryobi service center within the warranty
period.Theexpenseofdeliveringtheproducttotheservice
center for warranty work and the expense of returning it
back to the owner after repair or replacement will be paid
by the owner. Techtronic Industries North America, Inc.’s,
responsibility in respect to claims is limited to making the
required repairs or replacements and no claim of breach of
warrantyshallbecauseforcancellationorrescissionofthe
contractofsaleofanyRYOBI® brandoutdoorproduct.Proof
of purchase will be required by the dealer to substantiate
any warranty claim. All warranty work must be performed
by an authorized service dealer.
This warranty is limited to ninety (90) days from the date
of original retail purchase for any RYOBI® brand outdoor
product that is used for rental or commercial purposes, or
any other income-producing purpose.
This warranty does not cover any product that has been
subject to misuse, neglect, negligence, or accident, or that
has been operated in any way contrary to the operating
instructions as specified in this operator’s manual. This
warranty does not apply to any damage to the product that
is the result of improper maintenance or to any product
that has been altered or modified. The warranty does not
extendtorepairsmadenecessarybynormalwearorbythe
use of parts or accessories which are either incompatible
withtheRYOBI® brandoutdoorproductoradverselyaffect
its operation, performance, or durability. In addition, this
warranty does not cover:
This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
ThiswarrantyappliestoallRYOBI® brandoutdoorproducts
manufacturedbyorforTechtronicIndustriesNorthAmerica,
Inc., and sold in the United States and Canada.
To locate your nearest Authorized Ryobi Service Center,
dial 1-800-860-4050.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATOR’S MANUAL
18 VOLT HEDGE TRIMMER
P2601
• PARTS AND SERVICE
Prior to requesting service or purchasing replacement parts, please obtain your model
and serial number from the product data plate.
Pꢀ601
• MODEL NUMBER
• SERIAL NUMBER
• HOW TO OBTAIN REPLACEMENT PARTS:
1-800-860-4050. Replacement parts can also be obtained at one of our Authorized
Service Centers.
• HOW TO LOCATE AN AUTHORIZED SERVICE CENTER:
1-800-860-4050.
• HOW TO OBTAIN CUSTOMER OR TECHNICAL SUPPORT:
To obtain Customer or Technical Support please contact us at 1-800-860-4050.
RYOBI® is a registered trademark of Ryobi Limited used under license.
TECHTRONIC INDUSTRIES NORTH AMERICA, INC.
14ꢀ8 Pearman Dairy Road
Anderson, SC ꢀ96ꢀ5
Phone 1-800-860-4050
987000-314
04-10-08 (REV:0ꢀ)
Download from Www.Somanuals.com. All Manuals Search And Download.
|