Dishwasher
Instruction Manual
Model number: RHDW1 (B) (S) (G)
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
• Please comply with these instructions. If you do not, any damage resulting from
improper, incorrect or negligent use or improper connection or installation is not
covered by the manufacturer’s guarantee.
• Products must be installed in accordance with the manufacturer's safety
recommendations.
• Additions or modifications to the appliance are not permitted.
• Do not place or store flammable liquids, highly inflammable materials or fusible objects
on or near the appliance.
• Small children must be kept away from the appliance.
• The electrical safety of this dishwasher is guaranteed only if it is connected to a properly
earthed system, which complies with the electrical safety standards.
• Do not put pressure on the power supply cable while fitting the hob.
• Power supply cable length should not exceed 2m for isolation safety.
• Repairs to the appliance must only be carried out by authorised service personal.
• Make sure all the packaging has been removed before you use the appliance.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
• The appliance is not intended to be operated by means of an external timer or separate
remote-control system.
• Do not allow cigarette ashes, candle remains, polish, chemical substances to enter the
dishwasher.
• Cutlery with bone, ivory or nacre coated handles, glued items or items soiled with
abrasive chemicals.
• Plastic items that are not heat resistant.
• Aluminium and silver objects – these may discolour.
• Some delicate glass types, porcelains with printed patterns as they fade even after the
first wash.
• Crystal items should not be put in the dishwasher as these will lose transparency over
time.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
• Adhered cutlery that is not heat resistant.
• Lead crystal glasses.
• Cutting boards.
• Items manufactured with synthetic fibre.
• Absorbent items such as sponges and kitchen cloths.
EC declaration of conformity
• All stages related to the machine are executed in accordance with the safety rules
provided in all relevant directive of the European Community.
• 2004/108/EC, 2006/95/EC, IEC 436/DIN 44990, EN50242
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using the appliance
• Products must be installed in accordance with the manufacturer's safety
recommendations.
• This appliance must only be used for its intended purpose, domestic dishwashing.
Any other form of usage is to be considered as inappropriate, dangerous and will void
the manufacturer’s guarantee
• The manufacturer declines all responsibility in the event of damage caused by
improper or incorrect use or installation of the appliance.
• Before installation, check that all parts listed below are present. If any parts are
missing, please contact the product care service team on 0845 208 8750.
Upper basket
Lower basket
Cutlery basket
Drainage hose
(attached to the back of
the machine)
Instruction Manual
Water inlet hose
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using the appliance
Note
The drawings in the book may vary from your dishwasher model. They are designed to
show the different features of all models covered by this book. Your model may not include
all features.
1. Work top
2. Upper basket with racks
3. Upper spray arm
4. Lower basket
5. Lower spray arm
6. Filters
7. Rating plate
8. Control Panel
9. Detergent and rinse-aid dispenser
10. Cutlery basket
11. Salt dispenser
12. Upper basket adjustable track latch
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using the appliance
Control Panel
5
4
1
2
3
1. Power On/Off button- when the power On/Off button is pressed, the light on the
Start/Pause button will illuminate
2. Door handle - used to open/close the door
3. Start/Pause button - once you press the Start/Pause button, the programme you have
selected with the programme dial will start running and the indicator lamp ‘Wash/Dry’
will illuminate. If the programme is paused, the LED light will flash repeatedly.
4. Programme dial - with the programme dial, you can select your desired programme by
turning clockwise and anti-clockwise.
5. Status indicator - You can monitor the current status of your programme by using the
indicator light shown above. There are two progression states, ‘Wash/Dry’ and ‘End’.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
• Products must be installed in accordance with the manufacturer's safety
recommendations. Failure to do so will void the manufacturer’s guarantee.
• Before connecting your appliance to the mains at home, make sure to check the
conformity of the voltage settings. These are specified on the information sticker attached
to the appliance and/or packaging, with the usage conditions.
• The laws, ordinances, directives and standards in force in the country of use are to be
followed (safety regulations, proper recycling in accordance with the regulations, etc.)
When installing your machine
• After removing the packaging material from the appliance and its accessories, ensure that
the dishwasher is not damaged. If you suspect any damage, do not use the appliance and
contact an authorised service personal, qualified electrician or Product Care, (0845 208
8750), immediately.
• Ensure you choose a suitable, safe and level place to install your machine.
• We recommend this machine be installed by a qualified engineer.
• Only original spare parts should be used with this machine.
• Before installing, ensure the machine is unplugged.
• All electrical values must match the values indicated on the rating plate.
• Ensure the machine does not stand on the electricity supply cable.
• Never use an extension cable or multiple power point cable when using the appliance.
Note
Before using the machine, run a full cycle with the machine empty
Location of the Dishwasher
• When determining the place to put your machine, ensure there is sufficient room to fully
open the dishwasher door.
• Do not install the machine where the room temperature is likely to drop below 0°C.
• Before positioning, remove the machine from its packaging taking care to follow warning
instructions attached.
• Position the machine close to a water tap or drain.
• When moving the machine ensure you do not grip the door or panel.
• Ensure there is sufficient room around the machine to allow it to be moved for cleaning
purposes.
• Ensure that the water inlet hose does not become compressed while positioning the
machine. Also, make sure that the machine does not stand on the electrical cable.
• Ensure the machine is level when placed on the floor. Adjust the feet by turning them
clockwise to raise the height of the machine, and anti-clockwise to reduce the height of
the machine. Failure to ensure the machine is level may result in the door not closing
properly and the machine to sway (this is not recommended and will void the guarantee).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Water Connection
Ensure the machine is connected to a clean, cold running water supply.
Water inlet hose
Only use the water inlet hose supplied with this machine. Do not re-
use old inlet hoses. Connect the water inlet hose directly to the water
inlet tap. The pressure supplied by the tap should be a minimum of
0.03Mpa and a maximum of 1Mpa. If the water pressure is above
1Mpa, a pressure release valve should be fitted. After the connection
is made, the tap should be turned on fully so the fitting is secure and
there are no leakages. For the safety and maintenance of your
machine, make sure you always turn off the water after using the
machine.
Note:
Aquastop water spouts are used in some models. If it is there should
be no excess tension in it, it is not cut and that it is not twisted.
Water Outlet Hose
The water drain hose can be connected either directly to the water
drain hole or to the sink outlet spigot. Using a special bent pipe, the
water can be drained directly into the sink via hooking the pipe over
the edge of the sink. This connection should be a minimum of 50cm
and at a maximum of 110 cm from the floor.
Note
If a drain hose longer than 4m is used dishes may remain dirty and
manufacturer’s guarantee will be void.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Electrical connection
• Products must be installed in accordance with the manufacturer's safety
recommendations.
• Before proceeding with the electrical connection, verify that the current carrying
capacity of the system and the socket is adequate for the maximum power rating of the
dishwasher.
• Electrical installation of the residence and of the appliance’s plug must be earthed and
conform with the required safety regulations.
• Do not use adaptors, multiple sockets and/or extension leads.
• A circuit breaker with a contact opening of at least 3 mm, rated 20A and delayed
functioning type must be installed inside the supply circuit.
• Always use the coated plug supplied with your machine.
• The machine’s electric cable should be replaced by a qualified electrician only. Failure to
do so may result in injury and will void the manufacturer’s guarantee
• Always unplug the machine when a wash cycle has finished. Do not unplug with wet
hands. Always ensure you pull the plug, and not the cable leading into the plug.
Fitting the machine under a countertop
If you wish to fit your machine under a countertop, check whether you have sufficient
space under your countertop and whether the wiring-plumbing is suitable to do so.
1. If the space under the countertop is not sufficient for the machine to fit in it with its
worktop/top cover on it, then it can be removed. As shown in the illustration below.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
2. Remove the screws that hold the worktop, these are located at the rear of the
machine. When unscrewed and removed, push the front panel 1 cm from the front
side towards the rear and lift it.
3. Adjust the feet of the machine according to the slope of the floor.
4. Place/put your machine by lifting and pushing it under the countertop without letting
the hoses get crushed or bent.
Important note
• When in place the machine should not touch the countertop or be incorrectly balance,
as it may cause damage to cabinets, the floor or the countertop.
• The machine should be fitted in a space that are the same dimensions that detailed in
the above illustration.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use
Water
• To maximise cleaning quality, the machine requires soft water, (low calcareous water).
• Lime scale may form on dishes and the interior of the machine in hard water areas. This
will reduce the performance of the machine.
Filling with salt
• Use softener salt specifically produced for dishwashers – do not use table salt.
• To insert softener salt, remove the lower basket and open the salt compartment cap by
turning it anti clockwise (see image 1).
• Fill the salt compartment by mixing 1kg salt with water (picture 3), for the first time
only. For refilling, only insert salt without using water using a funnel to make this easier
(see image 4).
• Once this is filled, replace the cap twisting clockwise.
• When the salt indicator light is illuminated, add more salt to the machine.
Important note
Immediately after inserting salt, run the machine empty on a short cycle in order to
prevent corrosion.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
11
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use
Water softness test
• The washing effectiveness of your machine depends on the softness of the tap water.
For this reason, your machine is equipped with a system that reduces the hardness in
the mains water supply. To find out the hardness of water in your area, contact your
local water board who can determine the hardness of water in your area using a testing
strip.
• When you receive a testing strip, dip this into a cup of water for 1 second, remove from
the water and shake. Wait for 1 minute and assess the hardness of your water using the
below table.
Level
Lime Content
No Lime
Very Low Lime
Low Lime
Medium Lime
Lime
High Lime
Level 1
Level 2
Level 3
Level 4
Level 5
Level 6
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
12
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use
Adjusting salt consumption
Important note
The hardness setting of your dishwasher set to level 3 as a factory default setting
Water Hardness
Level
British Hardness
dE
Hardness Level Indicator
Wash/Dry Lamp is on
End lamp is off
Start/Pause Lamp is off
1
2
3
4
5
6
0 - 6
Wash/Dry Lamp is on
End lamp is off
Start/Pause Lamp is off
7 - 14
Wash/Dry Lamp is on
End lamp is off
Start/Paus Lamp is off
15 - 21
22 - 28
29 - 42
43 - 63
Wash/Dry Lamp is on
End lamp is off
Start/Pause Lamp is off
Wash/Dry Lamp is on
End lamp is off
Start/Pause Lamp is off
Wash/Dry Lamp is on
End lamp is off
Start/Pause Lamp is off
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
13
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use
Adjusting salt consumption
3
1
4
2
1. Move the programme dial to the Reset position (1) and press the power button to the
off position.
2. After switching the programme dial to the Reset position, press the Start/Pause button
and hold it own.
3. At the same time that the Start/Pause button is held down, press the On/Off button to
switch the machine on (2).
4. Keep Start/Pause button held down until the monitor lights illuminate (2).
5. After lights ‘Wash/Dry/End’ have flashed (3), release the Start/Pause button (2).
6. Your machine displays the latest entered water setting.
7. You can adjust the levels by pressing the Start/Pause button (2) according to the table
of hardness settings above.
8. After adjusting the water hardness level, press the On/Off button (4) to save the
settings in memory.
Detergent Use
Only use a detergent that is specifically designed for domestic dishwashers. Detergent
should be put into the compartment located on the inside of the door in prior to starting
the machine. Do not overfill the detergent department or this may damage your dishes.
For more information regarding the use of detergent, contact the detergent manufacturer.
Filling the detergent compartment
Push the latch to open the detergent container as shown in image 1. Insert either a
dishwasher tablet or powder detergent into the larger of the 2 compartments (b). If you
are washing heavily soiled items, pour a small amount (5cm³) into the prewash section of
the tablet dispenser (a).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use
Combined Detergents
Detergent manufacturers also manufacture combined detergents that are called ‘2 in 1’, ‘3
in 1’ and ‘5 in 1’. This dishwasher is suitable for use of 2 in 1 and 3 in 1 detergents only and
must be used on a setting of 70°C or more for them to work effectively.
When using such detergents, always place them into the detergent compartment in the
door of the machine and not directly into the interior of the machine. Using these
detergents will reduce the need for salt input into your machine as they are made up of a
combination of salt and detergent.
Contact the detergent manufacturer if you are not achieving the required standard of
cleanliness.
Points to consider when using this type of products:
• Always make sure to check the specifications of the product you will use or whether or
not it is a combined product.
• Check if the detergent used is appropriate for the hardness of mains water that machine
is appertaining to.
• Follow the instructions on packaging when using such products.
• If such detergents are in the form of tablets, never put them into the interior section or
the cutlery basket of the dishwasher. Always put the tablets into the detergent
compartment in the detergent dispenser.
• If you are using this type of detergent, you need to contact the manufacturers and find
out about the suitable conditions of use.
• When the conditions of use of such products and the machine settings are appropriate,
they ensure savings in salt and/or rinse aid consumption.
• Contact the detergent manufacturers if you are not obtaining good wash results (if your
dishes stay calcareous and wet) after having used 2 in 1 or 3 in 1 detergents. The
manufacturer’s warranty does not cover any complaints caused by the use of these
types of detergents.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
15
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use
Recommended usage
• If you want to obtain better results while using combined detergents, add salt and rinse
aid into your machine and adjust the water hardness setting and the rinse aid setting to
the lowest position.
• Solubility of the tablet detergents produced by different companies can vary depending
on the temperature and time. Therefore, it is not recommended to use such detergents
in short programs. It is more suitable to use powder detergents in such programs.
If you stop using combined detergents
• Fill the salt and rinse aid compartments.
• Adjust the water hardness setting to the highest position and run an empty-wash.
• Adjust the water hardness level.
• Make the suitable rinse aid setting.
Rinse aid
• Rinse aid is used to prevent white water drops forming on dishes. To add rinse aid to
your machine, remove the rinse aid compartment lid by twisting anti clockwise (1).
• Fill the rinse aid compartment until the rinse aid indicator becomes dark (b). As the
rinse aid is used over time, the rinse aid indicator will become lighter (a).
• The rinse aid level adjuster can be set between positions 1 and 6. The higher the
number, the more rinse aid will be used. The factory setting for the rinse aid indicator is
position 3.
Note
If you can see water stains forming on your dishes you will need to increase the rinse aid
level, if you see blue stains on your dishes you will need to decrease the amount of rinse
aid used
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
15
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use
Items not suitable for dishwashing
• Do not allow cigarette ashes, candle remains, polish or chemical substances to enter the
dishwasher.
• Cutlery with bone, ivory or nacre coated handles, glued items or items soiled with
abrasive chemicals.
• Plastic items that are not heat resistant.
• Aluminium and silver objects – these may discolour.
• Some delicate glass types, porcelains with printed patterns as they fade even after the
first wash.
• Crystal items should not be put in the dishwasher as these will lose transparency over
time.
• Adhered cutlery that is not heat resistant.
• Lead crystal glasses.
• Cutting boards.
• Items manufactured with synthetic fibre.
• Absorbent items such as sponges and kitchen cloths
Daily use
• This machine is for domestic use only. Commercial use of the washer will void the
manufacturer’s guarantee.
• Do not overload the machine. Only place dishwasher safe items in the machine.
• Only use detergents and rinse aids specifically designed for dishwashers. Use of other
detergents will void the manufacturer’s guarantee.
• Do not drink water out of the machine.
• Do not use chemical dissolving agents such as solvents – this may cause an explosion.
• Check that plastic items are heat resistant before placing them in the machine.
• Do not overfill the machine – this can cause damage.
• Do not open the door while it is in operation. The machine will stop but there is still a
risk of burning.
• Do not leave the dishwasher door open. This could lead to injury.
• Always place knives and other sharp object face down in the dishwasher to minimise
risk of injury.
• This machine is not designed to be used by children and should only be used by capable
individuals.
• Ensure the appliance is only used by persons with sufficient capabilities, experience and
knowledge. The instructions in this manual should be followed at all times.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use
Loading your dishwasher
• If you properly place your dishes into the machine, you will be using it in the best way in
terms of energy consumption, washing and drying performance
• Ensure dishes are placed in the machine with sufficient space for water to flow around
the dishes. This will allow optimum energy efficiency.
• There are two baskets provided with this machine, the upper basket is designed for
cups, glasses, shallow dishes and tea plates. The lower basket is designed for larger
plates, cooking pans and dishes.
• For washing cutlery, ensure you use the cutlery basket provided. When washing knives,
ensure these are placed point down on in the basket.
• Ensure that you do not balance glasses against each other as these may not remain
stable during the wash cycle may break which could result in injury.
Important note
Place items in the machine in a way which will not cause the upper spray arms to be
obstructed. This will stop the machine functioning correctly.
Dish rack(s)
Dish racks are located on the upper basket of the machine. When these are in the open
position (a), they can be used for placing cups and long knives on. When in the closed
position (b), long glasses can be placed in the upper basket
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
17
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use
Upper basket height adjustment
The basket height adjustment mechanism on the upper basket of your machine is designed
to let you adjust the height of your top basket upwards or downwards, without removing it
from your machine when it is full. To create large spaces at the top or bottom area of your
machine if required. The Basket of your machine is set to upper position as a default
setting. In order to raise your basket, hold it on both sides and pull it upwards. In order to
lower it, hold it from both sides again, lift it slightly and lower it.
Important note
When loading the upper adjustable basket, make sure that both sides of the mechanism
are in the same position (up or down).
Lower Basket
Folding Racks
Folding racks consisting of two parts that are located on the lower basket of the machine.
These are designed to let you place big items, such as pots, pans, etc. more easily in to the
machine. If required, each part can be folded separately, or all of them can be folded and
larger spaces can be obtained. You can use folding racks by raising them upwards, or by
folding.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
17
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use
Goblet clamp
It enables the safe washing of your goblets with long foot and stems. Do not lean your long
glasses on one another, as they will not remain stable and can be damaged during washing.
To create wide spaces when you do not want to use goblet clamp, turn it so it rests against
the side of the basket.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
17
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use
Loading examples
Lower basket
Upper basket
Incorrect loads
18
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use
Standard loading
• Upper and lower baskets: 12 place settings (combined/in total). The upper basket
should be adjusted to the high position and cups should be placed on the dish rack pins.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing procedure & programme selection
Important note
Short programs do not include a drying step
The values declared above are the values obtained under laboratory conditions according
torelevant standards. These values can change depending on conditions of product’s use
and environment (network tension, water pressure, water input temperature and
environment temperature).
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing procedure & programme selection
Programme selection
• To switch on the machine, press the On/Off button
• To select a programme, turn the programme dial to the desired position.
• Press the Start/Pause button
Monitor the wash cycle
You can monitor the progress of the wash cycle by using the programme follow up bulbs.
While the programme is running, the top light will illuminate. Once the programme has
finished, the bottom light will illuminate.
Changing a programme
To reselect a programme during a cycle, press the Play/Pause button once. Wait until the
cycle has stopped. This will allow you to reselect a different cycle using the instructions
above. The cycle will continue from the point it was stopped at, but will continue as a cycle
in the new selected programme.
Resetting during a cycle
To reset the machine during a cycle to allow you to reselect a programme from the start,
press the Start/Pause button once. Turn the programme dial to the Reset position. Press
the Start/Pause button once and wait 30 seconds for the water to be drained from the
machine. Once the End light is illuminated, you can reselect a new cycle.
Switching the machine off
To switch the machine off after a cycle, wait until the End light is illuminated. Then press
the ‘On/Off’ button.
Important note
If the machine door is opened during a cycle, the power is cut. Once the door is closed,
the programme will continue. Users should not open the door during a cycle as this can
result in burn injuries.
If the power is cut during a cycle, the programme is terminated. The machine will be
ready to select a new cycle.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Cleaning the machine regularly will prolong the machine’s service life.
Oil and lime accumulation
If oil and lime accumulate in the machine, run a full cycle with the machine empty but with
detergent.
Machine door seal
Use a damp cloth to wipe residues on the door seals regularly. This will prolong the life of
the door seal.
Cleaning the machine
Turn off and unplug the machine before cleaning. Clean the filters and spray arms at least
once a month to prevent blockages. Do not use strong detergents when cleaning your
machine, wipe with a mild detergent and damp cloth.
Filters
Check the fine filters for potential food waste deposits. If any food waste is present,
remove the filter and rinse thoroughly under a tap: a. Micro Filter, b. Coarse Filter & c.
Metal/Plastic filter.
To remove and clean the filter, turn anti-clockwise and take it out by lifting upwards (1).
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Pull and remove the metal/plastic filter (3). Then pull the coarse filter out of the micro
filter (2). Rinse this with water under a tap and refit the metal filter. Insert the coarse filter
into the micro filter and line up the corresponding markings. Lock the micro filter into the
metal/plastic filter and turn in the direction of the arrow (4) .
Important note
Never use the dishwasher without the filter present. Incorrectly fitting the filter will
reduce the washing effectiveness of the machine.
Spray arms
Always check the spray arm water outlet to ensure
they are not clogged. If these are clogged, ensure
they are cleaned.
The lower spray arm can be removed by pulling it
upwards, while the upper spray arm nut can be
removed by turning the nut to the left. Ensure the
nut is tightened sufficiently when refitting the upper
spray arm.
Hose filter
The inlet hose contains a filter to prevent potential water debris entering the machine.
Check the filter hose from time to time and clean if necessary. To clean the filter, first turn
the tap off and then remove the hose. After removing the filter from the hose, clean this
under the tap. Insert the cleaned filter back into its place inside the hose and refit the
hose.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble shooting
Error codes
Programme monitor light is on and Start/Pause light is flashing
Your machine door is open. Shut the door.
The programme won’t start
• Check the machine is plugged in.
• Check the indoor fuses in your home’s fuse box.
• Ensure the water inlet hose is connected and the valve on the tap is open.
• Ensure the machine door is closed.
• Ensure the machine is switched on.
• Ensure the water inlet filters are not clogged.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble shooting
‘Wash/Dry’ and ‘End’ keep flashing
• Water overflow alarm is active.
• Turn off the tap and contact Product Care on 0845 208 8750 for further advice.
Control lamps illuminated after cycle has finished
The ‘On/Off’ button has not been released.
Detergent residues are left in the detergent compartment
Detergent has been added when the detergent compartment is wet. Wipe dry the
detergent compartment before using the machine again.
Water will not drain
• The water drain hose is clogged or twisted.
• The filters are clogged.
• The programme has not yet finished.
The machine stops during cycle
• Power failure.
• Water inlet failure.
• Programme may be in standby.
• The door has been opened and not closed correctly.
Dishwasher is noisy
• Dishes are placed incorrectly inside the machine.
• The spray arm is hitting the dishes.
Dishes are still dirty after washing
• Dishes are not placed correctly in the machine – spray water is not hitting them.
• Basket is overloaded.
• Not enough detergent is added.
• An unsuitable programme has been selected.
• Spray arm has become clogged.
• Filters are clogged.
• Filters are incorrectly fitted.
• Water drain pump is clogged
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble shooting
White stains remain on the dishes after washing
• Not enough detergent is being used.
• Rinse aid setting is too low.
• Salt is needed due to hard water
• Water softener setting at low level.
• Salt compartment cap not closed properly.
Dishes won’t dry
• A programme without a dry operation has been selected.
• Rinse aid dosage set too low.
• Dishes unload before the programme has selected.
Rust stains are present on dishes
• High rate of salt in water.
• Salt compartment cap not closed properly.
• Too much salt spilt on the sides and into the machine while filling with salt.
• Unhealthy mains grounding.
If you having continuing issues after exploring possible solutions given, please contact
Product Care on 0845 208 8750 for further advice.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Specification
Specification
Model
RHDW1(B) (S) (G)
Dimensions (mm)
Capacity
(H)845 X (W)596 X (D)598
12 place settings
Net weight (Kg)
Electricity Input
Total Power (W)
Heating Power (W)
Pump Power (W)
Drain Power (W)
Water Supply Pressure
Current (A)
46
220 – 240 V , 50Hz
2200
2000
100
30
0,03MPa (0,3 bar) – 1MPa (10)
10
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to the mains supply
WARNING- THIS APPLIANCE MUST BE EARTHED
This appliance is designed to operate from a mains supply of AC230V ~ 50HZ.
Check that the voltage marked on the product corresponds with your supply voltage.
This product is fitted with a 13A plug complying with BS1363.
If this plug is unsuitable or needs to be replaced, please note the following:
Important: The wires in the mains lead are
Coloured in accordance with the following code:
GREEN/YELLOW - EARTH
BLUE - NEUTRAL
BROWN - LIVE
For UK use only – Plug fitting details (where applicable):
As the colours of the wires in the mains lead of this appliance may not correspond with
the coloured markings identifying the terminals in your plug, proceed as follows:
The GREEN/YELLOW wire is the EARTH and must be connected to the terminal which
is marked with the letter E or by the earth symbol or coloured GREEN or
GREEN/YELLOW.
The BLUE wire is the NEUTRAL and must be connected to
the terminal marked with the letter N or coloured BLACK.
The BROWN wire is the LIVE wire and must be connected
To the terminal marked with the letter L or coloured RED.
Always ensure that the plug cord grip is fastened correctly.
If a 13A (BS1363) fused plug is used it must be fitted with a 13amp fuse conforming to
BS1362 and be BSI or ASTA approved.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Spare parts
Spare part
Contact details
Upper basket
call 0845 208 8750
Lower basket
Cutlery basket
Inlet hose
Other
call 0845 208 8750
call 0845 208 8750
call 0845 208 8750
call 0845 208 8750
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
29
Download from Www.Somanuals.com. All Manuals Search And Download.
For Customer Services & Spare Parts
please call
0845 208 8750
Opening times: Monday - Friday
8am – 6pm & Saturday 9am –1pm
or visit us at
Revision 1
This symbol is known as the 'Crossed-out wheelie bin Symbol'. When this symbol is
marked on a product/batteries, it means that the product/batteries should not be
disposed of with your general household waste. Only discard electrical/electronic/battery
items in separate collection schemes, which cater for the recovery and recycling of
materials contained within. Your co-operation is vital to make sure the success of these
schemes and for the protection of the environment. For your nearest disposal facility, visit
www.recycle-more.co.uk or ask in store for details.
We reserve the right due to possible changes to design to alter the instruction manual
without prior notice.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
Download from Www.Somanuals.com. All Manuals Search And Download.
|