RoyalTek Projector RMP 8200 User Guide

Cinema on–the–GO !  
RMP-8200  
Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Thanks for purchasing RoyalTek’s product.  
What is inside the box:  
l
l
l
l
l
l
l
l
RMP-8200 CINEMA ON-THE-GO  
AC/DC Power adaptor(EU/UK/US plugs)  
Rechargeable battery  
USB cable  
A/V cable  
Tripod  
Remote control  
Carry Pouch  
Overview  
System Requirement:  
l
l
Windows 7, Vista (32bits & 64bits), XP (32bits & 64bits)  
USB port (1.1 or above, 2.0 recommended)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Insert the battery  
1. Slide the battery cover.  
2. Insert the battery.  
3. Replace the battery cover and slide it up gently until hearing a click.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Slide the lens cover to the other side  
Switch on the power button. From “O” side to “I”.  
Before you use, we suggest you to fully charge the battery.  
It will take around 2.5 hours for battery charging.  
Power adaptor  
1. Select the correct plug for your environment.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Connect the plug to the power adapter.  
To disconnect, please push the button and push out the plug.  
Notes:  
If The RMP-8200 CINEMA ON-THE-GO power is off, allow 3 hours for the  
battery to fully recharge. The battery will stop charging if The RMP-8200  
CINEMA ON-THE-GO power is on to avoid damage caused by high operating  
temperature. The battery can also be charged by connecting The RMP-8200  
CINEMA ON-THE-GO to a computer USB port. This method will fully charge  
the battery in six hours. The battery has a lifespan and ages every time it is  
fully charged and discharged. The battery will gradually loose charge capacity  
as it ages. Therefore, as the battery ages the battery life will decrease due to  
natural loss.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
The RMP-8200 CINEMA ON-THE-GO is designed to project with built-in memory  
or via expandable Micro SD card slot or connecting to other media devices.  
Connecting to a Notebook or Personal Computer  
Use the USB cable to connect The RMP-8200 CINEMA ON-THE-GO to  
desktop computers, laptop computers, ultra-portable computers for data  
transfer.  
Turn on the power and read the main menu as follows:  
Push the switch to  
side. Connect USB cable to your PC  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
When the main menu disappears, the connection succeeded and home screen  
shows.  
You can proceed with the data transfer.  
Note:  
To conserve power, The RMP-8200 CINEMA ON-THE-GO will stop projecting  
an image while connected to a computer USB port.  
Via Micro SD card/T Flash card  
Store the files you wish to project in a Micro SD or T/F card.  
l Insert the Micro SD Card/T Flash card  
Pull back the cover and insert the memory card.  
The memory card's electrical contacts should face up.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
l Remove the memory card  
Pull back the cover and push to release the memory card.  
When the main menu disappears, the connection succeeded and you can  
proceed with the data transfer.  
Note:  
To conserve power, The RMP-8200 CINEMA ON-THE-GO will stop projecting  
an image while connected to a computer USB port.  
To project, switch to  
side as and unplug USB cable.  
The main menu will show.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to a Composite Video Device  
Use the A/V cable to input video from camcorders, digital cameras, DVD  
players, smart phone with TV-out function and digital media players into the  
AV input on The RMP-8200 CINEMA ON-THE-GO .  
a. Connect the AV cable to The RMP-8200 CINEMA ON-THE-GO ’s AV input.  
b. Connect the other end of the AV cable to the video device’s audio  
and video outputs.  
Some video devices do not have the standard audio and video connections  
and may require an AV cable specified by the vendor. The AV cable allows you  
to connect your video device to your TV monitor or your projector. Also may be  
purchased from the video device vendor. When you have the AV cable, use  
the cable adapter to connect the video device cable and The RMP-8200  
CINEMA ON-THE-GO cable.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control  
Intended Use  
The RMP-8200 CINEMA ON-THE-GO is designed to operate with the  
ROYALTEK-specified battery and power adapter in normal office or home  
environments.  
0˚–30˚C (32˚–86˚F)  
10–40% RH (without condensation)  
0–1829 m (0–6000 feet) above sea level  
The operating environment should be free of airborne smoke, grease, oil and  
other contaminants that can affect the operation or performance of The  
RMP-8200 CINEMA ON-THE-GO.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Powering Off  
Switch off the power button. From “I” side to “O”.  
Status Indicator Light  
The status indicator light provides information about The RMP-8200 CINEMA  
ON-THE-GO ’s state.  
GreenThe RMP-8200 CINEMA ON-THE-GO is powered on  
AmberThe RMP-8200 CINEMA ON-THE-GO is charging the battery  
RedLow battery  
BlueKey pad  
Adjusting Image Size  
The RMP-8200 CINEMA ON-THE-GO can project a diagonal image of 8 to 60  
inches (203–1524 mm).  
Note:  
As increases the size of the projected image, you will need to decrease  
(darken) the room lighting.  
Adjusting the Focus  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control the Brightness  
The brightness mode can be accessed in setting menu  
the left button for medium or high.  
. Press the right or  
Control Volume  
While playing music or video files, push the button for volume up and for  
volume down when connected to a video or music source during video or song  
playback.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Checking the Battery Level  
The amount of charge currently in the battery displays in the status bar battery  
icon at the top right of the screen.  
Attaching the Tripod  
The RMP-8200 CINEMA ON-THE-GO includes a table-top tripod that mounts  
to the bottom of the.  
Tip: RMP-8200 CINEMA ON-THE-GO will attach to most camera tripods.  
Using the Micro SD Card Slot  
The RMP-8200 CINEMA ON-THE-GO has a Micro SD card slot for expanding  
up to 32 GB card. You can either place files on the card before you insert it into  
The RMP-8200 CINEMA ON-THE-GO ’s card slot or while The RMP-8200  
CINEMA ON-THE-GO is connected to a USB port on a computer.  
Insert Micro SD Card  
Insert the Micro SD Card/T Flash card  
Pull back the cover and insert the memory card. The memory card's electrical  
contacts should face up.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using  
Main Menu  
At power on, the main menu will display for choice. The RMP-8200 CINEMA  
ON-THE-GO provides an easy way to view all functions with their own icon.  
Each file list icon, when chosen, displays a listing of all files in the internal  
memory or Micro SD card. For example, when you choose the document file  
list, The RMP-8200 CINEMA ON-THE-GO will display all *.doc and *.pdf files.  
Main MENU  
1. MP3  
2. Photo files  
3. Settings  
Audio Option  
Display Option  
Timer Mode  
System Option  
Languages  
Information  
System Upgrade  
4. Video files  
5. AV in  
6. Office Viewer  
Micro SD Card: When a Micro SD card is installed in the slot, this icon will  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
display in the list. Select icon  
to display the contents of the Micro SD card.  
Video and Audio File Support  
There are many video and audio file formats. They contain various types of  
encoded video and audio. The table below shows the file type and video and  
audio codecs that the RMP-8200 CINEMA ON-THE-GO can read the decode.  
The table shows the file containers and video and audio formats that the  
RMP-8200 CINEMA ON-THE-GO supports. Because of differences in video  
and audio encoders, some of these files that are listed may still not play.  
Video Files Support  
Video  
Decoder  
Profile, Level  
Max. resolution & fps Max. Bitrate  
H.264  
BP, L3  
D1, 30fps  
D1, 30fps  
2Mbps  
2Mbps  
MPEG4  
ASP, SP, AVC  
Audio or  
Speech  
Decoder  
Layer, Version,  
or Mono/Stereo  
Sampling Frequency Max. Bitrate  
MPEG-1 layer 1,  
2, and 3 Audio  
MP3  
48kHz  
320kbps  
Audio or Speech  
Decoder  
Container Video Decoder  
*.avi  
H.264, MPEG4  
H.264, MPEG4  
MP3  
MP3 or AMR-NB or  
AMR-WB  
*.mp4  
MP3 or AMR-NB or  
AMR-WB  
AMR-NB or AMR-WB  
*.mov  
*.3gp  
Image  
Container  
H.264, MPEG4  
H.264, MPEG4  
Audio Format  
Max. MPixels  
*.jpg  
JPEG  
7MB  
2MB  
*.bmp  
Bitmap  
Setting  
Operation  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Play the music; the music is playing  
Pause the music; the music is paused  
Stereo sound is on  
left channel is on  
right channel is on  
next - skip the music for next one  
previous - back to previous one  
Play all Once; This plays all music once on either the MicroSD card or internal  
memory and then returns to the media file list. The play location depends on the  
first song played  
Shuffle play: plays music at random  
Repeat this one; Plays the selected file one time and returns to the media file list  
Repeat All: This plays all music continuously on either the MicroSD card or  
internal memory. The play location depends on the first song played  
Pause Playback  
1. Press the MENU button to pause video and audio playback.  
2. Press the MENU button again to resume playback.  
Skip to Previous or Next File During Playback  
1. Press the BACK  
back to file list.  
and choose  
button and press to be  
2. Press the NEXT  
previous file.  
button to skip or Press the PREVIOUS  
to the  
Return to File List  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the BACK  
button to return to the Main Menu.  
Photo View  
The photo view displays thumbnails of files in the internal memory or the Micro  
SD card. You can show one picture at a time or a slideshow, with or without  
background music in the photo view  
Photo File Support  
The RMP-8200 CINEMA ON-THE-GO can open and display bitmap (.bmp),  
gif and jpeg (.jpg) files. The RMP-8200 CINEMA ON-THE-GO supports up  
to a 2M (two megapixel) bitmap file or a 7M (seven megapixel) jpeg file.  
View a Photo  
1. Use the key pad buttons to select a photo as wished to view. The  
RMP-8200 CINEMA ON-THE-GO will display up to 35 photo thumbnails  
at a time. Press the DOWN button to see other thumbnails further down  
the file list.  
2. Press the MENU button to view the photo.  
Skip to the Next or Previous Photo  
Press the BACK  
button on the key pad and press the NEXT  
button  
to skip to the next file in the file list or Press the PREVIOUS  
to the  
previous in the file list.  
Start and Pause a Photo Slideshow  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Once the thumbnails is on, press  
button to start the photo slideshow.  
to pause the slideshow. Move  
2. During a photo slideshow, press BACK  
to  
and press to resume playback.  
3. During a photo slideshow, press  
button to turn on background music  
from the files in music files and press back  
button back to Setting  
for turning off background music  
during slideshows.  
Return to File List  
Press the BACK  
view.  
(in amber) button to return to the photo thumbnail  
Settings  
Audio Option – press UP and Down to select  
Equalizer – Press MENU and move UP and DOWN to select your  
preferred sound field from Normal, Classical, Jazz, Pop, Rock &  
Bass and press Menu to confirm  
Background music – Move  
Track – Press or to select from Left, Right to Stereo  
Display Option – Press UP and Down to select  
to turn on and  
to turn off.  
Brightness – Press  
or  
to select from High to Medium  
to select from MODE 0 TO 15  
Gamma – Press  
or  
Timer Mode – Photo Slide Interval  
Press or to select from 5, 10, 20, 30 or 60 Seconds  
System Option – Press UP and Down to select  
Load Default Setting – Press Yes or No to load your default Settings  
Format Memory – Press “Yes” or “No” to format internal memory  
press “Yes” will format memory which will lead your  
files deleted.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Format MicroSD Card – Press “Yes” or “No” to format memory  
press “Yes” will format memory of Micro SD card  
which will lead your files deleted.  
Languages – Press MENU and move UP and DOWN to select your  
preferred language from English, Traditional Chinese, Simplified  
Chinese, French, German, Spanish, Portuguese, Italian, Turkish  
or Japanese.  
Information – Shows model name, SW version, Manufacture Date, and  
memory sizes  
System Upgrade – If a software update becomes available, ROYALTEK  
will post the file and instructions on the ROYALTEK  
website.  
The following instructions will guide you to upgrade the RMP-8200 CINEMA  
ON-THE-GO.  
For update, you need to  
1. Copy and paste the folder (Folder name: upgrade) into the root of your  
Micro SD card.  
2. Insert the Micro SD card into RMP-8200 CINEMA ON-THE-GO and plug in  
AC adaptor.  
3. Switch on the power and find the screen as below then select setting icon.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Select “System Upgrade”.  
5. Then your will see the message as below. Please wait around 10 minutes.  
6. If you want to upgrade the system, please select “Yes”.  
7. You will find the flicker of screen while upgrading. When the progress  
finished, the system will reboot automatically. While it shows the start up  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
screen, the system upgrade is complete.  
When the main menu disappears, the connection succeeded and home screen  
shows  
You can proceed with the data transfer.  
Note:  
To conserve power, The RMP-8200 CINEMA ON-THE-GO will stop projecting  
an image while connected to a computer USB port.  
To project, switch to  
side as  
and unplug USB cable.  
The main menu will show.  
When the update is performed, all files on RMP-8200 CINEMA  
ON-THE-GO will be deleted. Please back up your files on the internal  
memory before performing the update.  
A/V in  
See Page “Connecting to a composite Video Device”  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Once a video source device is on, RMP-8200 CINEMA ON-THE-GO projects  
the video. Press the BACK  
button to return to the main menu.  
Office Viewer  
Selecting a File and Opening It  
1. Navigate to a file by pressing the up or down button on the key pad.  
2. Press the MENU button to the open the file.  
Document and PDF Files  
The RMP-8200 CINEMA ON-THE-GO uses the Picsel File Viewer to open  
and view Microsoft® Word files and Adobe PDF files.  
Document File Support  
Supported Versions  
The office viewer supports Microsoft® Word 95, Microsoft® Word 97,  
Microsoft® Word 2000, Microsoft® Word 2003, Microsoft® Word 2007 doc  
and docx files, and and Adobe® PDF versions 1.0 to 1.4..  
Font Support  
The RMP-8200 CINEMA ON-THE-GO has limited font support and the  
office viewer will automatically try to substitute unsupported fonts. Font  
substitutions may lead the document page layout to look different on The  
RMP-8200 CINEMA ON-THE-GO. If no font substitutions are available, the  
text will display as blanks. The office viewer supports embedded fonts in  
PDF documents but not Microsoft® Word documents. The office viewer will  
use the embedded font rather than The RMP-8200 CINEMA ON-THE-GO's  
system fonts.  
Note:  
If the office viewer runs out of memory, some of the last pages in the file  
may display as blank pages.  
Tip: If the document file contains special fonts or formatting, save the file in  
PDF file format and embed the fonts. The embedded fonts will be part of  
the file and eliminate font substitutions.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Embedded Objects Support  
The office viewer supports autoshape, lines, and Microsoft® Excel® and  
PowerPoint® objects. Some objects have limited or no support and will be  
substituted or left blank.  
Viewing a Document; word, excel, presentation and pad file  
1. Choose  
and press MENU on the key pad to select the document as  
wish to view. The RMP-8200 CINEMA ON-THE-GO will display seven  
files at a time. Press the DOWN button to see other files further down the  
file list.  
2. Press the MENU button to display the document.  
3. Zoom in and Pan around a page  
Once the document is open, press the MENU button on the keypad to  
zoom in the document page. The page will magnify each time you press the  
MENU button. The zoom in levels are: 1x (normal), 2x, 4x and 8x, then  
back to the normal. You can pan around the page which is magnified by  
using the key pad buttons UP  
, DOWN , RIGHT  
& LEFT  
Scrolling Through Pages  
press the UP  
and DOWN  
buttons on the key pad to scroll through  
the document pages while the page is normal.  
Return to File List  
Press the BACK  
button to return to the main menu.  
Office Files Support  
Supported Versions of Microsoft® Excel®  
The office viewer supports Microsoft® Excel® 95, Microsoft® Excel® 97,  
Microsoft® Excel® 2000, Microsoft® Excel® 2003, and Microsoft® Excel®  
2007 xls and xlsx files.  
Font and Number Support  
The RMP-8200 CINEMA ON-THE-GO has limited font and number support  
and the office viewer will automatically substitute unsupported fonts or  
numbers.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing a Spreadsheet File  
1. Use the UP and DOWN  
buttons on the key pad to select the  
document as wish to view. The RMP-8200 CINEMA ON-THE-GO will  
display seven files at a time. Press the DOWN  
files further down the file list.  
button to see other  
2. Press the MENU button to open the document.  
3. Zoom in and Pan around a page  
Once the document is open, press the MENU button on the keypad to  
zoom in the document page. The page will magnify each time you press the  
MENU button. The zoom in levels are: 1x (normal), 2x, 4x and 8x, then  
back to the normal. You can pan around the page which is magnified by  
using the key pad buttons UP  
, DOWN , RIGHT  
& LEFT  
Scrolling Through Pages  
Press the UP  
and DOWN  
buttons on the key pad to scroll through  
the document pages while the page is normal,  
Return to File List  
Press the BACK  
button to return to the main menu.  
Note:  
During magnify and pan operation in a spreadsheet, the image quality will  
degrade for a brief moment and then return to normal.  
Select Another Spreadsheet  
When the page is not magnified, press the UP  
and DOWN  
buttons  
on key pad to select another worksheet in the workbook.  
Return to File List  
Press the BACK  
button to return to the main menu.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Presentation Files  
The RMP-8200 CINEMA ON-THE-GO uses the Picsel FileViewe to open  
and view Microsoft® PowerPoint files.  
File Support  
Supported Versions Of Microsoft® PowerPoint® The office viewer supports  
Microsoft® PowerPoint® 95, Microsoft® PowerPoint® 97, Microsoft®  
PowerPoint® 2000, Microsoft® PowerPoint® 2003, and Microsoft®  
PowerPoint® 2007 ppt and pptx files.  
Font Support  
The RMP-8200 CINEMA ON-THE-GO has limited font support and the  
office viewer will automatically substitute unsupported fonts. Font  
substitutions may lead the presentation slide layout to look differently on  
The RMP-8200 CINEMA ON-THE-GO.  
Embedded Objects Support  
The office viewer supports autoshape, lines, and Microsoft® Excel® and  
Word objects. Some objects have limited or no support and will be blank.  
Viewing a Presentation  
1. Use the UP  
and DOWN  
buttons on the key pad to select the  
document as wish to view. The RMP-8200 CINEMA ON-THE-GO will  
display seven files at a time. Press the DOWN  
files further down the file list.  
button to see other  
2. Press the MENU button to open the document.  
3. Zoom in and Pan around a page.  
Once the document is open, press the MENU button on the keypad to  
zoom in the document page. The page will magnify each time you press the  
MENU button. The zoom in levels are: 1x (normal), 2x, 4x and 8x, then  
back to the normal. You can pan around the page which is magnified by  
using the key pad buttons UP , DOWN , RIGHT  
& LEFT  
Scrolling Through Pages  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the UP  
and DOWN  
buttons on the key pad to scroll through  
the document pages while the page is normal,  
Return to File List  
Press the BACK  
button to return to the main menu.  
Note:  
save the file in pdf file format and embed the fonts if the document file  
contains special font or format. The embedded fonts will eliminate font  
substitutions.  
Cleaning The RMP-8200 CINEMA ON-THE-GO  
1. Turn off The RMP-8200 CINEMA ON-THE-GO and disconnect power and  
other cables.  
2. Use a soft cloth to wipe off dust.  
3. Never use cleaning chemicals or solvents to clean the device which may  
cause the plastic parts off-colored.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product Specification  
Technology  
Resolution  
Brightness  
LCOS  
640 X 480 (VGA)  
Up to 15 lumens  
English/Traditional Chinese/Simplified Chinese/French/ German/  
Spanish / Portuguese/Italian /Turkish/Japanese  
Language  
Contrast Ratio  
Image Size  
Projection Distance  
Aspect Ratio  
Zoom & Focus  
Internal memory  
External memory  
USB  
200:1  
8 ~ 60" (203 - 1524mm)  
22 ~ 200 cm  
4:3  
Manual  
2GB  
Micro SD/T-Flash  
Data transfer, Battery charging  
Input source  
Speaker  
AV IN  
Stereo(0.5W)  
Power Supply  
Weight  
5V,2A, 110 – 240V  
145g (with battery)  
132 x 53 x 23 mm  
3.7V, 1800 mAh  
Dimension  
Battery  
Charge time  
2.5 hours(by Power adaptor)  
Charge0 ~ 45°C  
Discharge-20 ~ 60°C  
Operating Temp. of  
battery  
Video:80min(high brightness)  
Operating Time  
Music4.5 hours  
Operating Temp.  
Storage Temp.  
0 ~ 30°C  
-20 ~ 60°C  
OSD display:  
Warring: 100°C @light source NTC temp.  
Or 80°C @ panel  
Temp. protection  
Shut down:110°C @light source NTC temp.  
Or 82°C @ panel  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GreenPower  
AmberCharge  
*LED indicator  
RedLow battery  
BlueKey pad  
VideoH.264, MPEG4, AVC  
AudioMP3  
File format  
PictureJPG, JPEG, BMP  
OtherWord, Power Point, Excel, Text, PDF reader  
Right after Red LED light is on, plug in with attached power adaptor immediately  
is recommended. If not, the system will automatically shut-off to protect battery  
from over-discharge. To solve the shut-off, plug in with the power adapter in place,  
switch off and then switch on. The system should work properly.  
Trouble Shooting  
Q: The device will not turn on.  
A: • The battery is installed in the wrong orientation. See “Insert the battery” on  
page 4  
Try to remove and replace the battery.  
• The battery is not properly installed, or the power adapter is not connected to  
the device and a working wall outlet. Test the electrical outlet by plugging  
another electrical device (like a CD,DVD player) into the wall outlet to confirm  
that the wall outlet works.  
Q: The status indicator is red or no light  
A: • The battery needs to be charged or reinstalled.  
Q: The image is not visible or is very dim.  
A: The ROYALTEK RMP-8200 CINEMA ON-THE-GO is a battery-operated device  
and requires in controlled lighting conditions for good performance. The image  
may appear very dim in brightly lit rooms.  
• Project the image on a flat, white surface.  
• Decrease the light on the surface where the image is being projected.  
• Decrease the size of the image.  
Q: My video device is connected to the device but the device will not display  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
the video.  
A: Unplug the AV cable from the device and the home screen will display.  
Plug the AV cable into the device and the icon in the upper-left corner of the  
image will display the “AV cable” icon. The video output on some devices is  
turned off by default. Please refer to the device’s documentation for details on  
enabling the video output.  
Q: We tried to play iPhone's photos, but pictures couldn't be showed up  
through RMP-8200 Cinema-on-the-GO.  
A: • Choice the iPod / iPhone TV OUT function, but iPod/iPhone only can output  
photo and video. Others function can't output.  
• for iPod  
Settings -> video -> TV Out Widescreen -> ON.  
Q: Why use RMP-8200 then mobile have flicker problem in the main icon  
txt?(Nokia supoort Tv-out function mobile)  
A: • Please follow the below procedure to setting.  
Tools->Setting->General->Enhancement->TV-Out->Flicker filter (Select "ON")  
Support  
Need help?  
For the latest firmware updates, User’s Manuals & Trouble Shooting please visit  
www.royaltek.com or contact the local distributor  
© 2010 RoyalTek Company Limited. All rights reserved. RoyalTek reserves the  
right to make technical changes. RoyalTek assumes no liability for damages  
incurred directly or indirectly from errors, omissions or discrepancies between this  
product and the documentation. Other brands or logos are trademarks or  
registered trademarks of their respective companies.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pyramid Car Audio Stereo Amplifier PB1644 User Guide
Radio Shack Clock 65 792 User Guide
Raypak Water Heater 260 401 User Guide
Ricoh Digital Camera RDC 6000 User Guide
Roberts Radio Portable Radio ecologic1 User Guide
Roberts Radio Portable Radio R9988 User Guide
Roland Electronic Keyboard 5100001499 User Guide
Samsung Heat Pump RC090MHXEA User Guide
Sanyo Refrigerator MPR 715F User Guide
Sears Snow Blower 536886531 User Guide