Please read carefully the instructions for use and
the Safety Points to Note. Pay particular attenti-
on to the fold-out page with the illustrations.
page
GB
D
1
Bitte lesen Sie diese Gebrauchsanweisung und
die Sicherheitshinweise aufmerksam durch.
Beachten Sie dabei die Abbildungen auf der
ausklappbaren Bildseite.
Seite
6
Lire attentivement le mode d’emploi (et le con-
server pour pouvoir le consulter). Pendant la
lecture, dépiller la page avec les illustrations.
page
F
I
11
Leggere atteritamente le presenti istruzioni per
l’uso e le norme di sicurezza. Osservare la figu-
ra sui risvolli illustrati.
pagina
16
Lea en su totalidad el modo de empleo, conser-
vándolo para consultas posteriores. Para su lec-
tura, abra por la página ilustrada.
pág.
E
P
21
pag.
E favor ler com toda a atenção estas instruções
de serviçio, assim como as instruções de segu-
rança. Sera convenlente consultarem se as
figuras que se encontram nas página ilustrada
desdobraveil.
26
ꢀoꢁaꢂyꢃcꢄa, ꢄꢅaꢄeꢂꢆꢇo ꢈpoꢉꢊꢄaꢃꢄe ꢋꢄy
ꢊꢌcꢄpyꢌꢍꢊꢎ ꢈo ꢏꢌcꢈꢂyaꢄaꢍꢊꢊ ꢊ oꢐpaꢄꢊꢄe ocoꢐoe
ꢑꢇꢊꢒaꢇꢊe ꢇa ꢈpaꢑꢊꢂa ꢄexꢒꢊꢌꢊ ꢐeꢋoꢂacꢒocꢄꢊ. ꢓo
epeꢒꢔ ꢉꢄeꢇꢊꢔ ꢋꢄoꢃ ꢊꢇcꢄpyꢌꢍꢊꢊ oꢐpaꢄꢊꢄo
ꢑꢇꢊꢒaꢇꢊe ꢇa pꢊcyꢇoꢌ, ꢊꢋoꢐpaꢁeꢇꢇꢕꢊ ꢇa
ꢑꢇyꢄpeꢇꢇoꢃ cꢄopoꢇe cꢂoꢁeꢊꢌoꢃ ꢐpoꢖꢎpꢕ.
ctp.
RF
31
Rowenta Werke GmbH, 63016 Offenbach am Main
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Dear customer,
thank you for purchasing this appliance and for your confidence
in us. Please read the operating Instructions carefully and keep
them in a safe place.
A
Appliance description
1
LED „Traffic Light“
display
6
Filling inlet (with push-button
opening)
7
8
9
Spray nozzle
2
3
4
5
Spray button
Mains supply cord
Power steam button
Variable steam control
Water tank with maximum
water level indicator
Temperature control
dial
10 Soleplate (depending on model)
Safety instructions
• The appliance complies with EU directives 72/23/EEC and 89/336/EEC.
• The appliance may only be connected to alternating current as speci-
fied on the rating plate.
• If the detachable fuse cover is lost, a replacement may be purchased
from a Rowenta Service Centre (see enclosed Service Information
leaflet).
• Information for supply may also be obtained from the plug manufac-
turer.
• An electrical appliance is not a toy. Use and store the appliance out of
reach of children. Do not let the supply cord hang down.
• Do not leave the appliance unattended while it is connected to the
mains supply.
• Electrical appliances generate high temperatures. Always use the
handles provided and warn other users of the potential dangers (e.g.
escaping steam or hot water, especially when ironing vertically).
• Never treat clothing which is being worn.
• Always disconnect the appliance:
– before filling or emptying the water tank;
– before leaving the room (even for a short time);
– after use.
• Never unplug the appliance by tugging on the cord.
• Only safe extension leads should be used.
• Do not immerse the appliance in water.
• An electrical appliance should not be used if:
– the appliance, the supply cord or the cord protector is damaged;
– the appliance has been dropped;
– the appliance is obviously leaking. In this case the appliance should
be returned to an approved Rowenta Service Dealer for repair. (See
enclosed list for addresses.)
• Repairs to electrical appliances may only be carried out by specialists.
Improperly carried out repairs can cause serious danger to users. To
avoid danger to users, a defective or damaged supply cord may only
be replaced by an authorised Rowenta service centre.
• Rowenta accepts no liability for damage arising from improper use or
operation (see also POINTS TO NOTE). This appliance is for domestic
use only.
• When the appliance has reached the end of its operational life it
should be disposed of through the correct channels.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
D2 LED ”TRAFFIC LIGHT“ DISPLAY
Before use
B
The traffic lights tells you whether the soleplate is at the
selected temperature (see table below).
Before doing anything else, remove the soleplate protector!
Before ironing for the first time heat the appliance at the
maximum setting (see D "Setting the temperature").
A little smoke and a slight smell may be emitted, but this
is only temporary. The water tank can then be filled
directly (see C "Filling with water/topping up").
Colour
LED display
This means:
What to do
The soleplate is You can start ironing
still too cold for now, but the soleplate
the selected
material.
YELLOW
is not yet at the selec-
ted temperature.
Before ironing for the first time and after filling and hea-
ting up, the iron should be allowed to emit steam for at
least 1 minute to remove any impurities.
The soleplate is
You can start ironing
at the right tem- now. The soleplate is at
GREEN
RED
perature for the
the optimum tempera-
selected material. ture for your material.
Filling/topping up water
C
The soleplate is Wait for the iron to cool
Before filling the water tank, pull out the mains plug and
set the steam control to position
Tilt the iron. The filler inlet can easily be opened by
pressing the push-button. The inlet will open with a
"click". Pour in water up to the max (9) mark. Close the
filler inlet by pressing the push-button again, before
returning the iron to the horizontal.
still too hot for
the selected
material.
down to the selected
temperature and the
LED display to switch
to GREEN.
.
Tip: We recommend that you start with fabrics to be ironed
at a low temperature as the iron takes longer to cool
down than to heat up. For mixed fabrics set the tempe-
rature for the most delicate fabric.
What water may be used ?
Your iron has been designed to operate using tap water.
However, if your water is very hard, you can mix it 50%
tap water with 50% distilled or demineralised water.
Do not add anything to the contents of the water tank
and do not use water from clothes dryers, scented or
softened water, water from refrigerators, batteries or air
conditioners, pure distilled water or rain water. These
contain organic waste or mineral elements that become
concentrated when heated and cause spitting, brown
staining or premature water to your iron.
Ironing and Steam functions
E1 Dry ironing
E
To iron without continuous steam, turn the steam control
to
and set the temperature to suit the type of material
(care points •, ••, •••).
E2 Steam ironing
You can steam iron from temperature setting •• up. The
steam quantity can be set to between
quantity) and
(minimum steam
(maximum steam). We recommend setting
to maximum steam quantity only when the iron is at
temperature setting •••.
Setting the temperature
D
D1 Electronic temperature control (Thermo Control)
On your electronic iron you can set the precise ideal tem-
perature for each material. The different types of material
are shown on the temperature control dial:
E3 Intra Steam
Your iron is fitted with the new Intra Steam system. This
technology generates higher steam pressure to enable the
steam to penetrate much faster and further into the fabric.
This way you get excellent results from your ironing.
The steam is emitted in frequent bursts rather than conti-
nuously. The pressure generated may cause a slight noise.
This is not a technical fault!
E4 Power steam button (from temperature setting •• up)
To generate a powerful jet of steam and remove stubborn
creases, press the power steam button.
The soleplate of your iron is fitted with an electronic sen-
sor which continuously monitors the temperature of the
soleplate and keeps it at the precise selected setting. This
enables you always to iron at the optimum temperature.
Vertical steam ironing (from temperature setting •• up)
Ideal for removing creases from suits, jackets, skirts,
hanging curtains etc.
Important:
Never steam or iron clothing that is being worn!
- Hang up the garment on a hanger and hold the fabric
slightly taut with one hand.
- Set the thermostat control to maximum steam
- Hold the iron a few centimetres away from the garment
to avoid burning delicate fabrics.
- Press the power steam button repeatedly, moving the
2
3
iron from top to bottom.
Download from Www.Somanuals.com. All Manuals Search And Download.
The power steam and vertical steam functions (E 4) are
also possible if the steam control is set to . The interval
between bursts of steam should be about two seconds.
Problems?
I
Problems
Possible cause
Solution
Important:
The iron is plug-
ged in, but the
soleplate of the
iron remains cold.
No mains supply. Check that the mains plug is
properly inserted or try
Never direct the steam at persons or animals!
plugging the iron into a dif-
ferent socket.
E5 Spray function
To dampen stubborn creases, press the spray button.
The soleplate is
not heating up
properly.
The temperature
control is set too
low.
Set the temperature control
to a higher temperature (D).
Additional functions
F1 Anti-Drip system
F
LED „Traffic Light“ Temperature con- Turn the temperature control
display does not
light up.
Prevents water escaping from the soleplate when the
temperature is too low.
trol set to "0".
to the required setting.
F2 Anti-scale system
None or too little There is insuffi-
Fill the water tank (C).
steam is being
emitted.
cient water in the
water tank.
Your iron contains an anti-scale cartridge to reduce scale
deposits. This considerably prolongs the operational life
of your iron. The anti-scale cartridge is an integral part of
the water tank and need not be replaced.
Anti-Drip is active Wait for the soleplate to reach
(F1). the correct temperature.
All 3 colours of
the Traffic Light
display flash
alternately.
The automatic cut- If moved, the appliance will
out has activated: switch on again.
the appliance is
Do not use descaling agents, as these damage the lining of
the steam chamber and so may impair the steam function.
on standby.
F3 Automatic electronic 3-position cut-out (depending on
model)
The traffic Light
display flashes
red fast.
The temperature
Call our Customer Relations
If, although switched on, the appliance is not moved, it
will automatically switch off after the following intervals:
sensor in the sole- Helpline – see below
plate is defective.
Brown streaks
You are using che- Do not add any descaling
After 30 sec., if the iron is standing on the soleplate or
lying on its side.
come through the mical descaling
holes in the sole- agents.
plate and stain
agents to the water in the
water tank.
After 8 mins., if the iron is standing on its heel.
You linen is not
Ensure linen is rinsed
the fabric.
The LED display starts to flash yellow-green-red in regular
sequence. If the appliance is moved, it will automatically
switch on again and begin to heat up again.
rinsed sufficiently
thoroughly to remove any
or you have ironed soap desposits or chemicals
a new garment
on new garments which may
before washing it. be sucked up by the iron.
The soleplate is
dirty or brown
and can stain the
linen.
You are using a too See the temperature table to
After ironing
G
H
high temperature.
correctly set the thermostat.
• Unplug from the mains, pour away remaining water
and set steam control to . Then allow the appliance to
cool down.
• Store the iron standing on its heel.
• Do not wind the cord round the hot soleplate.
You are using
starch.
Clean the soleplate as indi-
cated above. Always spray
starch onto the reverse side
of the fabric to be ironed.
The soleplate is
scratched or
damaged.
You have placed
Always set the iron on its
your iron flat on a heel.
metallic rest-plate.
Cleaning and maintenance
You have ironed
over a zip.
Try to avoid ironing over zips
which may have rough edges.
When the appliance has cooled down, wipe it down with
a damp cloth or sponge, as required.
If you have any further problems or queries with our products
please call our Customer Relations team first for expert help and
advice:
Dirt can be removed from the soleplate with a damp
cloth or sponge. Do not use sharp or abrasive cleaning
agents or objects.
HELPLINE:0845 602 1454 – UK, 01 4751947 – Ireland
Important: If the appliance has been standing unused for
long periods, hold it horizontal and allow it to emit
steam for approx. 1 minute to clean the steam ducts and
remove any residue from the iron.
If you are unable to trace the cause of the fault, contact an
official Rowenta Customer Service Centre. The addresses are
shown in the enclosed service centre address list. Further hints
In line with a policy of continuous product improvement
Rowenta reserves the right to change product specifications
without prior notice.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
|