The RM70 is a single rack space mixer designed for the install/contractor market. It
is ideal for small clubs, restaurants, churches, or schools. The unit mixes three bal-
anced microphones with five stereo sources to mono or stereo balanced Main Out-
puts.
The XLR Microphone Inputs have Mic/Line level switches, a Mic/Loop Insert jack,
and individually switchable +12 VDC phantom power. Priority talkover is available
on one microphone for paging. When this function is engaged, the signal at Mic One
temporarily mutes the source signals - the other two mic signals are still present.
A Music-On-Hold function has been included for connection to an telephone
system. The signal present at Source 3 Input will be sent to the Music On Hold screw
terminal outputs. A Music On Hold level control has been provided to adjust the
Each Microphone input has a level and tone control, and Bass and Treble controls
have been provided for all the sources. A Master Output Level control adjusts the level
of all mixed signals.
A Remote Volume output jack is provided for connection to a 100K ohm linear
taper potentiometer and used as an external master level control.
FEATURES:
• Three XLR Microphone Inputs
• Individually switchable phantom power
• Five Stereo Source Inputs, Four RCA and one front panel stereo 3.5mm
• Tone controls for each Mic Input / Bass and Treble controls for the Source Inputs
• Music-On-Hold function with rear-panel Level control
• 1/4" TRS Mic Insert jack
SPECIFICATIONS
Input Impedance:
Mic:
Line:
600 Ω XLR balanced
22K Ω
Source:
Mic/Loop:
Mic:
22K Ω gold plated RCA
22K Ω 1/4" TS unbal.
-14 dBV Mic level
+20 dB Line levl
24 dBV
Max Input Level:
Source:
Mic:
Max Gain:
60 dB
Source:
26 dB
In/Out Connectors:
3: XLR, 4: Stereo RCA, 3: 1/4", 1: 3.5mm,
1 screw terminal
+12 VDC
Phantom Power:
Output Level:
+17 dBV max
Output Impedance:
Phase Shift:
Tone Controls (Sources):
51 Ω
<10 degrees, 20Hz to 20 kHz
+/-12 dB 100 Hz Bass
+/-12 dB 11kHz Treble
-3dB; 300 Hz C.W. 4 kHz C.C.W.
6 dB / Octave
96 dB
- 80 dB
<.025%
Tone Controls (Mic):
Tone Shelving Slope
Max S/N ratio:
Nose Floor:
THD:
CMRR:
Size:
>52 dB (Mic)
19" x 1.75" x 6"
(48.3 x 4.5 x 15 cm)
5 lbs. (2.3 kg)
Weight:
10/31/06
Download from Www.Somanuals.com. All Manuals Search And Download.
|