®ÂØÒňή
Workshop
Expandable Synthesizer Module
and Audio Interface
SonicCell
Using SonicCell with a DAW
© 2008 Roland Corporation U.S.
All rights reserved. No part of this publication may be reproduced in any form without the written permission of Roland Corporation U.S.
Windows XP™, Windows XP 64-bit Edition™ , Windows Vista™, and Windows Vista 64-bit Edition™ are trademarks of Microsoft Corporation. Mac OS X™, Logic Pro™, and GarageBand™ are
trademarks of Apple Inc. SONAR LE™ and SONAR are trademarks of Twelve Tone Systems, Inc. Ableton Live ™ is a trademark of Ableton. Digital Performer™ is a trademark of Mark of the
Unicorn, Inc. Microsoft Corporation, Apple Inc., Twelve Tone Systems, Inc, Ableton, and Mark of the Unicorn Inc. are not associated or affiliated with Roland in any manner.
SCWS01
1
Download from Www.Somanuals.com. All Manuals Search And Download.
your DAW, which records the data on a MIDI track. The DAW also passes the
MIDI data back to SonicCell, where it triggers SonicCell’s synth, causing notes
to play.
The SonicCell/DAW Workflow
While we’ll discuss each of the following actions in greater detail in
subsequent booklets, here’s an overview of how you can use SonicCell with
a DAW.
You can directly connect a MIDI controller to your computer and DAW
if the controller supports MIDI over a USB connection or if you have a
separate MIDI interface. In these booklets, though, we’ll assume you’re
connecting your MIDI controller to SonicCell’s MIDI IN jack.
Some SonicCell Synth Stuff You Need to Know First
About SonicCell’s Performance Mode
After connecting your SonicCell, computer, and MIDI controller to AC power,
you connect
SonicCell is a 16-part multitimbral synth module, meaning that you can
play 16 of its patches at once when SonicCell is in Performance mode. This
is generally the best mode to use for sequencing. Here are a few things you
need to know about Performance mode:
•
•
your MIDI controller—to SonicCell using a MIDI cable.
SonicCell to your computer—using the included SonicCell USB cable.
•
•
•
Each patch is played by one of Performance mode’s 16 available “parts.”
Here’s how MIDI and audio data moves between the system’s components:
M
I
D
I
Parts 1-16 appear in SonicCell’s default startup screen.
Each part has its own settings that determine how its patch plays.
MIDI data is passed
through SonicCell...
plays SonicCell patches.
through SonicCell.
Live audio...
U
S
U
S
U
S
U
S
B
B
B
This is the first screenful of settings for Part 1.
B
goes to DAW for recording.
DAW output is heard...
Each part receives MIDI data from the DAW on a specific MIDI channel.
...to DAW for recording.
MIDI data from DAW...
The MIDI channel to which Part 1 is currently set to respond.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
All 16 parts share an effect setup consisting of three multi-effects (MFX 1-3),
a global reverb, and a global chorus.
•
You’ll bring your SonicCell sounds into the DAW—as audio tracks. You can
do this as you develop your arrangement, or, since you’ll be able to hear
SonicCell’s output as you work, when you’ve finished it.
If your DAW allows you to do a realtime, online bounce to capture
your final stereo mix, you don’t have to record SonicCell’s sounds as
audio tracks at all. You can simply set up an audio track to listen to
SonicCell’s output so that its sounds are included in the mix.
When you record and play back MIDI tracks in your DAW, the data is sent to
SonicCell on the MIDI channel assigned to the desired part and patch.
Listening Strategy
To learn more about MIDI, see the Introduction to MIDI InFocus booklet,
When you use SonicCell with a DAW, the best way to work is to listen
through SonicCell. Plug your headphones into SonicCell’s PHONES output,
or connect your speaker amp or powered speakers to SonicCell’s L/MONO
and R OUTPUT jacks. Once you’ve connected SonicCell to your computer, the
DAW’s output will automatically be sent into SonicCell so you’ll hear:
About SonicCell’s Patch Mode
If you need only one of SonicCell’s patches, you can use SonicCell’s Patch
mode, where all of SonicCell’s effect-processing power is dedicated to
making that single patch sound its best. When you use Patch mode, send
MIDI data to SonicCell on its Patch Receive Channel (shown as “RX Ch” on
the Patch Play screen).
•
•
SonicCell’s own patches—playing from SonicCell.
the output of your DAW—including your already-recorded DAW audio
tracks and soft synths.
To learn about changing between Performance and Patch mode, see the
•
mics or instruments plugged into SonicCell—live through SonicCell.
SonicCell Owner’s Manual.
This setup provides zero-latency monitoring that allows you to work without
hearing any time lag between your patches, live sounds, and the DAW.
What You’ll Do with Your SonicCell and DAW
•
You’ll sequence a MIDI track in your DAW—for each SonicCell patch you
want to use. For a new song, use SonicCell’s PRST 01 Seq: Template
performance, with its 16 parts conveniently set to MIDI Channels 1-16.
If you’re an advanced Mac user, you can take advantage of Audio/
MIDI Setup’s ability to receive audio from SonicCell while monitoring
through a different audio interface by creating an aggregate audio
interface that includes both SonicCell and that other audio interface.
•
You’ll select, set up, and edit SonicCell’s sounds and effects—using the
SonicCell Editor plug-in on one of your DAW’s other tracks.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up Your MIDI Controller
Connecting the MIDI Controller
2
Press the CURSOR/VALUE dial to display the System menu.
First, connect your controller to SonicCell by connecting a MIDI cable from
the controller’s MIDI OUT jack of to SonicCell’s MIDI IN jack.
MIDI cable connected to
controller’s MIDI OUT jack
The top of the System menu
3
Turn the CURSOR/VALUE dial to select the USB-MIDI Thru parameter.
4
5
Press the CURSOR/VALUE dial and set USB-MIDI Thru to ON.
Press EXIT twice to complete the operation.
SonicCell’s rear-panel
To learn how to use your MIDI controller, see its documentation.
To preserve this setting, press USB AUDIO or INPUT, and then MENU, and
then the CURSOR/VALUE dial. Select Ok and press the dial again.
Configuring SonicCell
Setting Up Your Computer
Here’s how to set SonicCell to pass a connected MIDI controller’s data to your
DAW via USB:
Installing the SonicCell Driver and Editor
1
Press SonicCell’s MENU button, and then turn the CURSOR/VALUE
dial to select SYSTEM.
SonicCell works with the following computer operating (OS) systems:
•
•
•
Windows XP™
Mac OS X™
•
Windows XP 64-bit Edition™
Windows Vista 32-bit Edition™ • Windows Vista 64-bit Edition™
In the following steps we’ll describe the installation of drivers for Windows
XP 32-bit and Mac OS X, the two most common operating systems. (All of the
SonicCell driver installers come with installation instructions in any event.)
The following instructions assume you’re familiar with the operation of
your computer. If you’re not, consult its documentation.
MENU button
CURSOR/VALUE dial
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Downloading the Driver and Editor
Windows XP Driver Installation
1
Power up your PC with all USB cables disconnected except for your
keyboard and mouse.
Each driver installer includes details regarding the OS system
requirements for its driver, as well as a list of cautions and
limitations.
2
3
If any applications are running, quit them.
Open up the SonicCell_WinXPDrvXXX [“XXX” is the current driver
version] folder, and double-click the Setup file inside to display the
following window:
1
Point your browser to the following URL or click the link below:
In your browser, click the Downloads tab.
2
3
4
Locate the desired driver, and click its name.
In the “End-User License Agreement,” click “I AGREE AND WISH
TO PROCEED WITH DOWNLOAD”—the file downloads to your
computer.
5
On a
•
PC—the downloaded file is automatically uncompressed. Locate
the driver folder called“SonicCell_WinXPDrvXXX,”and the Editor
folder called “SonicCell_PLE_vXXX.” (“XXX” in both folder names
here is the current version number.)
•
Mac—go to your standard download location and find the
driver folder called “SonicCell_MAC_USBDrvXXX” and an Editor
folder called “SonicCell_PLE_vXXX.” (“XXX” in both folder names
here is the current version number.)
If an “Install Program as Other User” dialog appears, quit the installer,
and then log in as the system administrator before re-launching the
Setup application from Step 3.
4
Click Next to display the installation start window:
Depending on your version of Mac OS X, you may need to double-click
the downloaded driver and Editor files to create the folders above—the
files are called “SonicCell_MAC_USBDrvXXX.zip” and “SonicCell_MAC_
PLE_vXXX.zip,” respectively.
6
Inside each download’s folder, you’ll find its installer file.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
If you see the Software Installation window instead of the one shown
above, click Continue Anyway. If you can’t continue, see “About Driver
Signing Options” later in this booklet.
5
Click Next—the driver is installed and instructions appear telling you
what to do next.
8
Click the button to the left of “Install the software automatically
(Recommended),” and then click Next to install the driver.
When the driver’s installed, the wizard announces the completion of
the installation process.
If the “Software installation” window appears after you click
Next, click Continue Anyway. If you can’t continue, see “About
Driver Signing Options” later in this booklet.
We’ll take you through these instructions in this booklet, so you can
close this window or drag it over to the side of the screen if you want
to keep it open.
If the “System Settings Change” window appears, click Yes to
restart Windows, and jump ahead to “System Settings on Your
Computer” after restarting.
6
7
With SonicCell’s power turned off, plug one end of the included USB
cable into its USB jack, and the other end into the USB jack you want
to use on your computer.
9
Click Finish.
Turn on SonicCell—after a few moments, the PC’s Found New
Hardware Wizard window appears, as shown in the following
screenshot.
Windows displays “Your new hardware is ready to use.”
If the Driver Setup window’s still open, click its Close button.
Jump ahead to “System Settings on Your Computer.”
10
11
If, instead of seeing the Found New Hardware window, you’re asked if
you want to connect to Windows Update, select No, not this time, and
then click Next to display the Found New Hardware window.
Should you ever need to remove the SonicCell driver from your system,
the driver installer folder also contains an uninstaller. You can hold
onto this file, or re-download the driver folder later should you need
it.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
About Driver Signing Options
Windows XP Editor Installation
The Driver Signing window lets you select whether Windows should block
the installation of an unknown driver, warn you about it, or just install it.
By default, this procedure also installs the SonicCell Librarian and
Playlist Editor onto your computer’s hard drive.
1
2
In the Start menu, select Control Panel.
If you’re in
1
Locate the SonicCell_PLE_vXXX—where “XXX” is the current version
number—and double-click the Setup executable file.
•
Category View—click Performance and Maintenance, and then
click System.
•
Classic View—double-click System.
Double-click
this Setup file.
The installer opens.
3
4
5
Click the Hardware tab, and then click Driver Signing.
Set “What action do you want Windows to take?” to Ignore or Warn.
Click OK to close the Driver Signing window.
2
3
Click Next.
Read the License Agreement, and if you’d like to proceed with the
installation, click Yes.
4
In the Choose Destination Location window, you can select a
location on your hard drive for the SonicCell Editor—unless you have
a specific reason to choose a different location, leave the default
location as is—and then click Next to display the Setup Type window,
shown on the next page.
6
7
Click OK to close the System Properties window.
Return to the driver installation instructions earlier in this booklet.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Mac OS X Driver Installation
1
Close all other applications, and In the SonicCell_MAC_USBDrv101
folder, double-click the SonicCellUSBDriver.pkg file to launch the
driver installer.
2
If you see the following sheet, click Continue.
5
Highlight the Complete installation to install all of the SonicCell
applications, and then click Next.
The installer splash screen opens:
If you’d like to install only particular SonicCell applications, click
Custom to highlight it, and then click Next. Checkmark the items you
want to install, and then click Next.
6
7
8
Again, unless you have a reason to select a new location for the
installed SonicCell files, leave the installer set to the default location,
and click Next. (To select another location, click Browse...)
The installer displays your installation selections and tells you it’s now
ready to install the SonicCell Editor. Click Next to proceed—the files
are installed.
On some Macs, this screen may look different, with the smaller text on
top telling you you’re working with the driver installer and the larger
text saying it’s the Editor installer. This doesn’t indicate a problem.
When the installer tells you it’s finished, click Finish to close the
installer.
3
Click Continue.
If you ever decide to remove the SonicCell Editor from your computer’s
hard drive, simply run the same Setup file you ran back in Step1. If
the installer sees the Editor is already installed, it presumes you now
want to remove it. You can hold onto your Editor installer folder, or
re-download it later on should you decide you need it.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
The installer presents this window in which you can change the
installation location for the driver if you wish to. By default, the driver
will be installed at /Library/Audio/MIDI Drivers so that any user of
your computer can use the SonicCell. While we recommend you click
Install without changing the default location, you can limit the use
of the SonicCell to a specific user by changing the location to [user
name]/Library/Audio/MIDI Drivers if you like.
Mac OS X Editor Installation
By default, this procedure also installs the SonicCell Librarian and
Playlist Editor onto your computer’s hard drive.
1
Double-click the SonicCell Editor Installer.mpkg file. The installer
window appears.
4
5
Click Install, or Upgrade if you’ve previously installed an earlier
version of the driver.
If the computer asks you to enter your computer’s administrator
password, type it in and click OK.
6
7
When a sheet appears telling you that you’ll need to restart your Mac
after installation is complete, click Continue Installation to install the
SonicCell driver.
2
3
Click Continue.
When you see “Install Succeeded,” click Restart to restart your Mac.
After reading the software license agreement, click Continue, and the
click Agree in the sheet that appears.
A window appears in which you can change the installation location
for the editor software, we recommend you leave the default setting
as is and simply proceed to the next step.
4
5
Click Install.
When the installer asks for your administrator password, type it in,
and then click OK to install the software.
After the software’s been installed, the SonicCell Editor folder opens
and “Installation Successful” appears.
6
Click OK to close the installer.
Should you ever need to remove the SonicCell driver from your system,
the driver installer folder also contains an uninstaller. You can hold
onto this file, or re-download the driver folder later should you need
it.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
In the Performance Options window, click the Advanced tab.
Select Background Services as shown here.
System Settings for Your Computer
Optimizing Your Windows PC for Audio
To optimize Windows XP for DAW audio operations
1
2
In the Start menu, select Control Panel.
If you’re in
•
Category View—click Performance and Maintenance, and then
click System.
•
Classic View—double-click System.
6
Click OK to close the Performance Options window, and then click OK
to close the System Properties window.
You’ll find more tips on tweaking Windows XP for recording and
3
Click the Advanced tab, and then click the Performance Settings
button.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using SonicCell for System Sounds
Sending Windows XP System Sounds to SonicCell
1
2
In the Start menu, select Control Panel.
If you’re in
•
Category View—click Sounds, Speech, and Audio Devices, and
then click Sounds and Audio Devices.
•
Classic View—double-click Sounds and Audio Devices.
5
You’ll need to disable the sound card so it doesn’t conflict with
SonicCell. If you want to disable the card
•
for the current user of the PC—set Device usage to Do not use this
device in the current hardware profile (disable).
•
for all users of the PC— set Device usage to Do not use this device
in any hardware profile (disable).
6
7
Click OK.
In the list, double-click Roland SonicCell.
3
Click the Hardware tab to display a list of devices.
8
Set Device usage to Use this device (enable), and then click OK.
4
Double-click your current sound card in the list.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending Mac OS X System Sounds to SonicCell
The SonicCell Driver Settings
1
Open your System Preferences window.
The SonicCell driver installer adds an SonicCell control panel to Windows,
and a Preferences pane to Mac OS X. In these windows, you’ll find controls
you may need as you work with your DAW.
Windows XP
Mac OS X
2
3
Click Sound—circled above—to open the Sound control panel.
Click the Output tab, and select Roland SonicCell.
The Audio Buffer size parameter can be helpful if you’re having trouble
successfully record or playing back in your DAW. Larger buffer settings can
get rid of clicks and pops, though they also increase latency in the DAW.
Matching Sample Rates
In digital audio, the number of times per second that a sample—
essentially a snapshot—is taken of your audio is called the “sample
rate.” CDs use a sampling rate of 44.1 kHz, or 44,100 samples per
second.
SonicCell can operate at 44.1 kHz, 48 kHz, and 96 kHz sampling rates, and
you can select any one with which your DAW is also compatible. Use
•
44.1 kHz—if you’re recording music strictly for CD. Since 44.1 kHz is
the sampling rate CDs use, you’ll avoid having to apply sample-rate
conversion later on.
In the Sound control panel, you’ll see SonicCell’s current sample rate
after “Roland SonicCell.” We’ll discuss sample rates in a bit.
4
Close the Preferences window.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
48 kHz—for slightly better audio quality than 44.1 kHz if your destination
media isn’t a CD. If it is, you can still use 48 kHz, but the sample-rate
conversion process you’ll need to get the recording onto a CD will
probably take away any benefits the higher sample rate’s gotten you.
If you’re using LogicPro, GarageBand, or Ableton Live, you should now head
over to the Using SonicCell as an Audio Interface Workshop booklet.
Here’s how to create an Audio/MIDI Setup SonicCell device:
1
Launch Audio/MIDI Setup by double-clicking it—you’ll
find Audio/MIDI Setup in the Utilities folder within your
Applications folder.
96 kHz—for very high-quality audio. Again this is mostly for recordings
not destined for CD, for the same reasons as 48 kHz.
You set the sample rate for SonicCell using its front-panel SAMPLING RATE
switch—simply set the switch to the desired sample rate.
2
At the top of the Audio/MIDI Setup window,
click the MIDI Devices button to open the MIDI
pane of Audio/MIDI Setup.
Switch location viewed from the top.
SAMPLE RATE switch on front panel
After you change SonicCell’s sample rate while it’s connected to a
computer via USB, you’ve got to either power it off and back on for the
sample rate change to take effect, or unplug and re-plug either end of
the USB cable connecting SonicCell and the computer.
3
4
In the Audio/MIDI Setup window—and circled in red above—you see
SonicCell as a MIDI interface. This object represents the MIDI jacks
SonicCell provides to your Mac.
If you’re using Windows, you should now head over to the Using SonicCell as
an Audio Interface Workshop booklet.
Click the Add Device button at the top of the screen—or select Add
New External Device from the MIDI menu—to create a new external
device object in the window.
Mac OS X Audio/MIDI Setup Settings
For some DAWs—such as Logic Pro™, GarageBand™, and Ableton™ Live—
there’s no further setup required before you launch your DAW. For others—
such as Mark of the Unicorn’s Digital Performer™—you’ll need to create a
SonicCell device in Mac OS X’s Audio/MIDI Setup (AMS) application.
This device will represent SonicCell’s synthesizer, with its 16 parts.
5
Double-click the device, and enter its settings as shown on the next
page.
If you can’t see SonicCell among the destinations you can select for
MIDI data in your DAW, you need to create a SonicCell Audio/MIDI
Setup MIDI device.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
The red arrows here show the direction in
which you drag—you won’t see them in
Audio/MIDI Setup
8
Quit Audio/MIDI Setup. If you’re using Digital Performer, head over
now to the Using SonicCell as an Audio Interface Workshop booklet.
You can make the SonicCell Audio/MIDI Setup device look like
SonicCell. Go to your Library/Audio/MIDI Devices folder, and create a
Roland folder there. Place a picture of SonicCell in the Roland folder.
Once you do this, you’ll be able to click the Open Icon Browser button
shown above and select the SonicCell picture for your new device. If
you have a live internet connection, you can download a picture to use
The End
We hope you’ve found this workshop helpful. Keep an eye out for other
SonicCell Workshop booklets available for downloading at www.RolandUS.
com.
6
Click Apply and close the window. Your new device is now called
“SonicCell.”
If you didn’t add an icon to it,
the SonicCell MIDI device looks
like this.
If you added an icon to it, the
SonicCell MIDI device looks like
this.
7
Click and drag the left-hand arrow at the bottom of the SonicCell
MIDI interface object—the one on top—to the left-hand arrow on
the SonicCell synth object, and do the same for the objects’right-side
arrows until the connection between the two looks like the following
picture.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
|