Owner’s Manual
Thank you, and congratulations on your choice of the Roland Digital Piano HP103.
Main Features
Piano Sounds with Rich Resonance and Wide-ranging Expressiveness
The stereo sampling piano sound generator realistically reproduces even the sound
of the hammers striking the strings, producing the tones of a high-quality concert
grand piano. Maximum polyphony of 64 notes ensures that you can use the pedal
freely without running out of notes.
In addition, this instrument features a “Grand Sound” speaker system, and
simulates the full, three-dimensional nature of a concert grand piano (Grand Space),
which together help to deliver a sound with even greater clarity and power
(Dynamic Emphasis).
Pursuing the Playing Feel of a Grand Piano
This instrument features a progressive hammer action keyboard, which duplicates
the touch of a grand piano, with a heavier touch in the lower register, and a lighter
touch in the upper register.
The pedal is designed for good-feeling response, and allows subtle performance
nuances to be expressed.
Comfortable for Use with Headphones
Special effects applied to the sound when headphones are used make listening
through headphones comfortable, not fatiguing. And in addition to an indicator on
the front panel that lights up when you connect a pair of headphones, the HP103 also
provides a convenient hook where you can keep your headphones when they’re not
in use.
A Variety of Helpful Practice Features and Built-in Piano Songs
A metronome function and “two-track recorder,” the built-in songs for a collection
of scores (60 songs included), and other features let you experience piano lessons in
ways possible only with a digital piano.
Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY
INSTRUCTIONS” (p. 2), “USING THE UNIT SAFELY” (p. 3, 4), and “IMPORTANT NOTES” (p.
5, 6). These sections provide important information concerning the proper operation of the unit.
Additionally, in order to feel assured that you have gained a good grasp of every feature provided
by your new unit, Owner’s manual should be read in its entirety. The manual should be saved and
kept on hand as a convenient reference.
Copyright © 2004 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in
any form without the written permission of ROLAND CORPORATION.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE UNIT SAFELY
The
symbol alerts the user to important instructions
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
The
symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
The ● symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet.
•
001 Before using this unit, make sure to read the
•
009 Do not excessively twist or bend the power cord,
nor place heavy objects on it. Doing so can
damage the cord, producing severed elements and
short circuits. Damaged cords are fire and shock
hazards!
instructions below, and the Owner’s Manual.
..........................................................................................................
002a
•
Do not open or perform any internal modifica-
tions on the unit.
..........................................................................................................
•
010 This unit, either alone or in combination with an
..........................................................................................................
amplifier and headphones or speakers, may be
capable of producing sound levels that could
cause permanent hearing loss. Do not operate for
a long period of time at a high volume level, or at
a level that is uncomfortable. If you experience
any hearing loss or ringing in the ears, you should
immediately stop using the unit, and consult an
audiologist.
•
003 Do not attempt to repair the unit, or replace parts
within it (except when this manual provides
specific instructions directing you to do so). Refer
all servicing to your retailer, the nearest Roland
Service Center, or an authorized Roland
distributor, as listed on the “Information” page.
..........................................................................................................
004 Never use or store the unit in places that are:
..........................................................................................................
•
•
011 Do not allow any objects (e.g., flammable material,
• Subject to temperature extremes (e.g., direct
sunlight in an enclosed vehicle, near a heating
duct, on top of heat-generating equipment); or
are
coins, pins); or liquids of any kind (water, soft
drinks, etc.) to penetrate the unit.
• Damp (e.g., baths, washrooms, on wet floors);
or are
..........................................................................................................
012a:
•
Immediately turn the power off, remove the
power cord from the outlet, and request servicing
by your retailer, the nearest Roland Service
Center, or an authorized Roland distributor, as
listed on the “Information” page when:
• Humid; or are
• Exposed to rain; or are
• Dusty; or are
• Subject to high levels of vibration.
..........................................................................................................
• The power-supply cord, or the plug has been
damaged; or
•
007 Make sure you always have the unit placed so it is
level and sure to remain stable. Never place it on
stands that could wobble, or on inclined surfaces.
• If smoke or unusual odor occurs
• Objects have fallen into, or liquid has been
spilled onto the unit; or
..........................................................................................................
008a
•
The unit should be connected to a power supply
only of the type described in the operating instruc-
tions, or as marked on the bottom of unit.
• The unit has been exposed to rain (or otherwise
has become wet); or
• The unit does not appear to operate normally or
exhibits a marked change in performance.
..........................................................................................................
..........................................................................................................
008e
•
Use only the attached power-supply cord. Also,
the supplied power cord must not be used with
any other device.
..........................................................................................................
3
Download from Www.Somanuals.com. All Manuals Search And Download.
107b
•
•
013 In households with small children, an adult
Never handle the power cord or its plugs with wet
should provide supervision until the child is
capable of following all the rules essential for the
safe operation of the unit.
hands when plugging into, or unplugging from,
an outlet or this unit.
..........................................................................................................
108d: Selection
..........................................................................................................
014 Protect the unit from strong impact.
•
If you need to move the instrument, take note of
the precautions listed below. At least two persons
are required to safely lift and move the unit. It
should be handled carefully, all the while keeping
it level. Make sure to have a firm grip, to protect
yourself from injury and the instrument from
damage.
•
(Do not drop it!)
..........................................................................................................
015 Do not force the unit’s power-supply cord to share
•
an outlet with an unreasonable number of other
devices. Be especially careful when using
1
• Check to make sure the knob bolt securing the
unit to the stand have not become loose. Fasten
them again securely whenever you notice any
loosening.
extension cords—the total power used by all
devices you have connected to the extension
cord’s outlet must never exceed the power rating
(watts/amperes) for the extension cord. Excessive
loads can cause the insulation on the cord to heat
up and eventually melt through.
• Disconnect the power cord.
• Disconnect all cords coming from external
devices.
..........................................................................................................
016 Before using the unit in a foreign country, consult
•
• Raise the adjusters on the stand (p. 12).
• Close the lid.
with your retailer, the nearest Roland Service
Center, or an authorized Roland distributor, as
listed on the “Information” page.
• Remove the music rest.
..........................................................................................................
..........................................................................................................
026 Do not put anything that contains water (e.g.,
109a
•
Before cleaning the unit, turn off the power and
•
flower vases) on this unit. Also, avoid the use of
insecticides, perfumes, alcohol, nail polish, spray
cans, etc., near the unit. Swiftly wipe away any
liquid that spills on the unit using a dry, soft cloth.
..........................................................................................................
110a
•
Whenever you suspect the possibility of lightning
in your area, pull the plug on the power cord out
of the outlet.
..........................................................................................................
001-50
•
Connect mains plug of this model to a mains
socket outlet with a protective earthing
connection.
..........................................................................................................
116 Be careful when opening/closing the lid so you do
•
not get your fingers pinched (p. 10). Adult super-
vision is recommended whenever small children
use the unit.
101a
..........................................................................................................
•
The unit should be located so that its location or
118b
position does not interfere with its proper venti-
lation.
•
Keep the included the music rest’s attachment
screws, screws of stand, and wing nut in a safe
place out of children’s reach, so there is no chance
of them being swallowed accidentally.
..........................................................................................................
102b
•
Always grasp only the plug on the power-supply
cord when plugging into, or unplugging from, an
outlet or this unit.
..........................................................................................................
..........................................................................................................
103a:
•
At regular intervals, you should unplug the power
plug and clean it by using a dry cloth to wipe all
dust and other accumulations away from its
prongs. Also, disconnect the power plug from the
power outlet whenever the unit is to remain
unused for an extended period of time. Any
accumulation of dust between the power plug and
the power outlet can result in poor insulation and
lead to fire.
..........................................................................................................
•
104 Try to prevent cords and cables from becoming
entangled. Also, all cords and cables should be
placed so they are out of the reach of children.
..........................................................................................................
•
106 Never climb on top of, nor place heavy objects on
the unit.
..........................................................................................................
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT NOTES
291b
In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2,
3 and 4, please read and observe the following:
355b
Power Supply
• When moved from one location to another where the
temperature and/or humidity is very different, water
301
• Do not connect this unit to same electrical outlet that is
being used by an electrical appliance that is controlled by
an inverter (such as a refrigerator, washing machine,
microwave oven, or air conditioner), or that contains a
motor. Depending on the way in which the electrical
appliance is used, power supply noise may cause this unit
to malfunction or may produce audible noise. If it is not
practical to use a separate electrical outlet, connect a
power supply noise filter between this unit and the
electrical outlet.
droplets (condensation) may form inside the unit. Damage
or malfunction may result if you attempt to use the unit in
this condition. Therefore, before using the unit, you must
allow it to stand for several hours, until the condensation
has completely evaporated.
356
• Do not allow rubber, vinyl, or similar materials to remain
on the unit for long periods of time. Such objects can
discolor or otherwise harmfully affect the finish.
3•58Do not allow objects to remain on top of the keyboard.
This can be the cause of malfunction, such as keys ceasing
to produce sound.
307
• Before connecting this unit to other devices, turn off the
power to all units. This will help prevent malfunctions
and/or damage to speakers or other devices.
359
• Do not paste stickers, decals, or the like to this instrument.
308
Peeling such matter off the instrument may damage the
exterior finish.
• Although the LCD and LEDs are switched off when the
POWER switch is switched off, this does not mean that the
unit has been completely disconnected from the source of
power. If you need to turn off the power completely, first
turn off the POWER switch, then unplug the power cord
from the power outlet. For this reason, the outlet into
which you choose to connect the power cord’s plug
should be one that is within easy reach.
Maintenance
401b
• To clean the unit, use a dry, soft cloth; or one that is
slightly dampened. Try to wipe the entire surface using an
equal amount of strength, moving the cloth along with the
grain of the wood. Rubbing too hard in the same area can
damage the finish.
Placement
402
351
• Never use benzine, thinners, alcohol or solvents of any
• Using the unit near power amplifiers (or other equipment
kind, to avoid the possibility of discoloration and/or
deformation.
containing large power transformers) may induce hum.
To alleviate the problem, change the orientation of this
unit; or move it farther away from the source of
interference.
403
• The pedals of this unit are made of brass.
Brass eventually darkens as the result of the natural
oxidization process. If the brass becomes tarnished, polish
it using commercially available metal polisher.
352a
• This device may interfere with radio and television
reception. Do not use this device in the vicinity of such
receivers.
For HP103-PE
352b
• Since your piano has a polished finish that is as delicate as
that found on finely crafted wooden furniture, it needs
careful, periodic care. A few important suggestions
concerning the proper care of the unit follow.
• Noise may be produced if wireless communications
devices, such as cell phones, are operated in the vicinity of
this unit. Such noise could occur when receiving or
initiating a call, or while conversing. Should you
experience such problems, you should relocate such
wireless devices so they are at a greater distance from this
unit, or switch them off.
• For dusting, wipe the instrument with a soft cloth
that has been soaked with water, then squeezed dry.
Be sure to wipe gently. Even the tiniest grains of sand
or grit can leave scratches on the surface if too much
force is applied while wiping.
354b
• Do not expose the unit to direct sunlight, place it near
devices that radiate heat, leave it inside an enclosed
vehicle, or otherwise subject it to temperature extremes.
Also, do not allow lighting devices that normally are used
while their light source is very close to the unit (such as a
piano light), or powerful spotlights to shine upon the
same area of the unit for extended periods of time.
Excessive heat can deform or discolor the unit.
Do not use any cleaners or detergents, since they might
deteriorate the surface of the cabinet, and produce
cracks. Do not use dusting cloths that contain
chemicals.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT NOTES
Additional Precautions
553
• Use a reasonable amount of care when using the unit’s
buttons, sliders, or other controls; and when using its jacks
and connectors. Rough handling can lead to malfunctions.
556
• When connecting / disconnecting all cables, grasp the
connector itself—never pull on the cable. This way you
will avoid causing shorts, or damage to the cable’s
internal elements.
5•57A small amount of heat will radiate from the unit during
normal operation.
558a
• To avoid disturbing your neighbors, try to keep the unit’s
volume at reasonable levels. You may prefer to use
headphones, so you do not need to be concerned about
those around you (especially when it is late at night).
559b
• When you need to transport the unit, pack it in shock-
absorbent material. Transporting the unit without doing
so can cause it to become scratched or damaged, and
could lead to malfunction.
560
• Do not apply undue force to the music rest while it is in
use.
562
• Use a cable from Roland to make the connection. If using
some other make of connection cable, please note the
following precautions.
• Some connection cables contain resistors. Do not use
cables that incorporate resistors for connecting to this
unit. The use of such cables can cause the sound level
to be extremely low, or impossible to hear. For
information on cable specifications, contact the
manufacturer of the cable.
565
• Before opening or closing the keyboard lid, always make
sure that no pets or other small animals are located on top
of the instrument (in particular, they should be kept away
from the keyboard and its lid). Otherwise, due to the
structural design of this instrument, small pets or other
animals could end up getting trapped inside it. If such a
situation is encountered, you must immediately switch off
the power and disconnect the power cord from the outlet.
You should then consult with the retailer from whom the
instrument was purchased, or contact the nearest Roland
Service Center.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel ..........................................................................................8
Rear Panel............................................................................................9
Notes Regarding Recording ....................................................30
Erasing a Performance from the Specified Track .................34
Erasing a Song ...........................................................................34
Using the Music Holders .........................................................11
Using the Headphones Hook..................................................11
Making Detailed Settings (Function).............................................35
Applying the Damper Pedal to the Left-hand Keyboard
Chapter 1.
Enjoying the Internal Songs and Demo ................13
Listening to Internal Songs.............................................................13
Playing Back the Tone Demo Songs.......................................14
Listening to a Demo of the Functions ....................................15
(Grand Space Mode).................................................................37
Preventing the Settings from Changing During Performance ..38
What’s MIDI?.............................................................................40
(Grand Space) ...................................................................................19
Adding Liveliness to the Sound (Dynamic Emphasis)...............20
Adding Reverberation to the Sound (Reverb)......................21
Error Messages/Other Messages...................................................43
Tone List ............................................................................................44
Internal Song List .............................................................................45
Easy Operation List..........................................................................47
Main Specifications..........................................................................49
Playing Different Tones with the Left and Right Hands
(Split Play).........................................................................................24
Changing the Keyboard’s Split Point.....................................25
Using Metronome ............................................................................25
Sounding the Metronome........................................................25
Changing the Metronome Volume.........................................26
Splitting the Keyboard Into Two Sections for Four-Hand
Performances (Twin Piano Mode).................................................27
Index........................................................................ 50
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Panel Descriptions
Front Panel
2
3
4 5 6 7 8 9 10
11
12
13 14 15 16 17 18 19 20
Power On
1
1
2
3
[Power On] switch
Turns the power on/off (p. 11).
13 [-] [+] buttons
Allow you to select the value of various settings.
Pressing both the [-] and [+] buttons simultaneously
returns the setting of a particular item or function to its
original value.
[Volume] knob
Adjusts the overall volume level (p. 12).
[Demo] button
You can listen to a demo of the instrument’s tones as
well as a demo of the various functions (p. 14).
14 [Song/Tempo] Button
Each time you press this button, the song number and
the tempo will be displayed alternately.
will light in red. While the tempo is displayed, it will
light in green.
4
[
(Headphones)] indicator
This indicator lights up when headphones are connected
to the headphone jack (p. 11).
5
6
[Grand Space] button
Adds a sense of depth to the sound (p. 18, p. 19).
15 [Metronome/Count In] Button
count-in sound, which can be played before the song
perfect timing (p. 28).
[Dynamics] button
You can add liveliness to the sound to give it superb
clarity and distinctness (p. 20).
7
8
9
Adjusts the tone brightness (p. 12).
16 [Play] button
[Transpose] button
Also starts/stops recording of a performance (p. 31–p.
33).
[Split] button
areas, allowing you to play a different sound in each area
(p. 24). By holding down this button and the [Reverb]
make settings for various functions (p. 35–p. 38, p. 40–p.
41).
17 [Rec] button
Puts the HP103 in recording-standby mode (p. 30–p. 34).
18 [Left] button
Plays back or records a performance separately for each
10 [Reverb] button
The left-hand performances of the internal songs are
assigned to this button.
Adds reverberation to the sound (p. 21).
This button and the following [Right] button are
collectively referred to as the “track buttons.”
11 Tone buttons
They are used to choose the kinds of tones (tone groups)
played by the keyboard (p. 16).
19 [Right] button
Plays back or records a performance separately for each
hand (p. 29, p. 32–p. 34).
The right-hand performances of the internal songs are
assigned to this button.
12 Display
The display indicates values for various settings,
including the tone variation, song number, and tempo.
Usually these will appear as in the figure above.
20 [Key Touch] button
Modifies the playing feel of the keyboard (p. 17).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
1
2
Connect to external MIDI devices to exchange
performance data (p. 40).
Input jacks
1
2
3
These jacks can be connected to another sound
generating device or an audio device, so that the sound
of that device will be output from the HP103’s speakers
(p. 39).
3
Output jacks
Allows you to output the piano’s sound to sound
reinforcement equipment to obtain a more powerful
sound. These can also be connected to a tape recorder or
other recording device to record a performance (p. 39).
Front Panel
Rear Panel
4.
Headphones
jack
5.
Pedal jack
6.
AC inlet
4
5
Headphones jacks
A set of headphones can be connected here (p. 11).
Pedal jack
Connect the pedal cable of the special stand to this jack
(p. 10).
6
AC inlet
Connect the supplied power cord here.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start Playing
Connecting the Pedal Cord
Setting Up the Music Rest
Connect the pedal cord to the Pedal jack on the bottom
1. Insert the included music rest attachment screws into
panel of the instrument, at the rear.
the screw holes on top of the HP103, and tighten the
fig.00-01
screws slightly.
fig.00-03
Connecting the Power Cord
2. Put the music rest between the screws and the HP103’s
1. Insert the included power cord into the AC inlet on the
body.
bottom panel of the instrument, at the rear.
2. Plug the power cord into a power outlet.
NOTE
Be sure to use the supplied power cord.
fig.00-02
3. While supporting the music rest with one hand, secure
it in place by turning the screws.
When attaching the music rest, support it firmly with
one hand to make sure that you don’t drop it. Be careful,
so you don’t get your fingers pinched.
Opening/Closing the Lid
4. To remove the music rest, support it with one hand
while loosening the screws.
To open the lid, use both hands to lift it lightly, and
slide it away from yourself.
After removing the music rest, don’t forget to retighten
the screws.
To close the lid, pull it gently toward yourself, and
lower it softly after it has been fully extended.
fig.00-05
NOTE
Do not apply excessive force to the installed music rest.
NOTE
Be sure to use the supplied screws for attaching the
music rest.
NOTE
When opening and closing the lid, be careful not to let
your fingers get caught. If small children will be using
the HP103, adult supervision should be provided.
NOTE
Before moving the piano, be sure to remove the music
rest to prevent accidents.
NOTE
If you need to move the piano, make sure the lid is
closed first to prevent accidents.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start Playing
■ Using the Music Holders
■ Using the Headphones Hook
You can use the holders to hold pages in place.
Whenever you are not using the headphones, you can hang
them on the headphone hook at the lower left of the HP103.
When not using the holders, leave them folded down.
Attaching the Headphone Hook
*
HP103-PE has not music holders.
Press and twist the headphone hook included with the
fig.mu_stand4
HP103 into the hole in the bottom of the HP103 (refer to the
figure below). Turn the wing nut of headphone hook to
secure the headphone hook.
Wing Nut
Headphone Hook
Connecting Headphones
The HP103 has two jacks for plugging in headphones. This
allows two people to listen through headphones
simultaneously, making it very useful for lessons and when
allows you to play without having to worry about bothering
others around you, even at night.
Turning the Power On and Off
NOTE
Once the connections have been completed, turn on
power to your various devices in the order specified. By
turning on devices in the wrong order, you risk causing
malfunction and/or damage to speakers and other
devices.
Plug the headphones into the Phones jack located at the
bottom left of the piano.
When headphones are connected, the [ (Headphones)]
indicator (p. 8) lights up, and sounds stop playing from
the speakers of the HP103.
To turn the power on, turn the [Volume] knob all the
way down, and then press the [Power On] switch.
The power will turn on, and the Power indicator at the
left front of the HP103 will light.
The headphone volume is adjusted by the [Volume]
knob (p. 12) of the HP103.
fig.00-04.e
After a few seconds, you will be able to play the
keyboard to produce sound.
Use the [Volume] knob to adjust the volume.
*
This unit is equipped with a protection circuit. A brief interval
(a few seconds) after power up is required before the unit will
operate normally.
Phones jack x 2
fig.00-06.e
Power On
NOTE
Use Stereo headphones.
Some notes on using headphones
•
To prevent damage to the cord, handle the headphones only by
the headset or the plug.
•
Connecting the headphones when the volume of connected
equipment is turned up may result in damage to the
headphones. Lower the volume on the HP103 before plugging
in the headphones.
Power Indicator
To turn the power off, turn the [Volume] knob all the
way to the left, and press the [Power On] switch.
•
Listening at excessively high volume levels will not only
damage the headphones, but may also cause hearing loss. Use
the headphones at a moderate volume level.
The Power indicator at the left front of the HP103 will go
dark, and the power will be turned off.
*
If you need to turn off the power completely, first turn off the
[POWER] switch, then unplug the power cord from the power
outlet. Refer to “Power Supply” (p. 5).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start Playing
Adjusting the Sound’s
Volume and Brilliance
About the Adjuster
When you move the HP103 or if you feel that the pedals are
unstable, adjust the adjuster located below the pedals as
follows.
Turn the [Volume] knob to adjust the overall volume.
Press the [Brilliance] button to adjust the brightness of
the sound.
❍
Rotate the adjuster to lower it so that it is in firm contact
with the floor. If there is a gap between the pedals and
the floor, the pedals may be damaged. In particular
when placing the instrument on carpet, adjust this so
that the pedals firmly contact the floor.
Select one of the three available settings to obtain the
desired brilliance.
[Brilliance]
button’s indicator
Lit in
green
fig.00-09.j
Off
Lit in red
Brilliance
Medium
Mellow
Bright
fig.00-07.e
Adjuster
Min
Max
If the adjuster is difficult to turn, have one person lift
either the left or right side of the stand to make it easier
for another person to turn the adjuster and make the
adjustment.
About the Pedals
The pedals have the following functions, and are used
NOTE
mainly for piano performance.
fig.00-08.e
After adjusting the adjuster, press the pedals, and if the
front board moves, turn the adjuster further so that it
makes firm contact with the floor.
NOTE
Soft Pedal
Damper Pedal
Always readjust the adjuster after moving the piano.
Sostenuto Pedal
Damper pedal (right pedal)
While this pedal is pressed, notes will be sustained even after
you take your fingers off the keys.
On an acoustic piano, holding down the damper pedal will
resonance.
The HP103 simulates this damper resonance.
You can change the amount of resonance applied with
the damper pedal. Please refer to “Changing the Damper
Pedal’s Resonance” (p. 35).
Sostenuto pedal (center pedal)
This pedal sustains only the sounds of the keys that were
already played when you pressed the pedal.
Soft pedal (left pedal)
When you hold down this pedal and play the keyboard, the
sound will have a softer tone.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1.
Enjoying the Internal Songs and Demo
Listening to Internal Songs
The HP103 comes with 66 piano songs onboard.
“Chapter 3. Playing Along
with the Internal Songs” (p. 28)
■ Playing Back All Songs Continuously (All Song Play)
“Internal Song List” (p. 45)
The internal songs can be played back consecutively.
fig.panel1-1
1 2
1
Hold down the [Song/Tempo] button, and press the [Play] button.
When you play back an
internal song, the reverb effect
will automatically be turned
on (the button’s indicator
lights).
The [Song/Tempo] button’s indicator will light in red, the [Play] button’s indicator will
blink, and the songs will play back successively, starting with the currently selected
song.
The song number appears in the display for several seconds.
You can press the [-] or [+] button to select the song that you want to play back.
When all songs have been played, playback will return to the first song and resume.
Stopping the playback
2
Press the [Play] button.
Playback will stop.
■ Selecting a Song and Playing It
fig.panel1-2
2 1 3, 4
Choosing the song to play back
1
Press the [Song/Tempo] button, getting its indicator to light in red.
About the display for the
internal songs
The song number appears in the display for several seconds.
fig.disp-USr
USr (user) … The location
where you can record your
performance. (For details on
recording → p. 31)
2
Press the [-] or [+] button to select a song.
Numbers with a “S.”
… internal songs.
Holding down the button causes the numbers to change continuously.
Playing back
Press the [Play] button.
3
The button’s indicator will light, and the selected song will play.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Enjoying the Internal Songs and Demo
Stopping the playback
4
Press the [Play] button.
The button’s indicator goes out, and playback stops.
The next time you press the [Play] button, the song that was stopped is played from
the beginning.
Listening to the Demo Songs
You can listen to various demo songs, including those demonstrating the piano and
other tones, as well as the function applied to the piano tones.
■ Playing Back the Tone Demo Songs
fig.panel1-3
1, 2
1
Press the [Demo] button.
The button’s indicator flashes, and playback of the tone demo songs starts.
When playback of the last song is finished, playback then returns to the first song.
When you press any of the tone buttons while the [Demo] button is flashing, the
demo song corresponding to that tone button is played.
Button assigned
Demo content
tone demo
[Piano]
[E. Piano]
[Harpsi]
[Organ]
[Strings]
[Split]
Piano tone demo songs
E. Piano tone demo songs
Harpsichord tone demo songs
Organ tone demo songs
Strings tone demo songs
Demo songs using the Split function (p. 24)
Stopping the Tone Demo Songs
2
Press the [Demo] button.
The [Demo] button’s indicator goes off, and the demo quits.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Enjoying the Internal Songs and Demo
■ Listening to a Demo of the Functions
You can listen to the demo of the functions that can be applied to the piano tones.
fig.panel1-3
1, 3 2
1
2
Press the [Demo] button.
The button’s indicator flashes, and playback of the tone demo songs starts.
Press any of the following buttons.
Button assigned function
demo
Demo content
Page
p. 18
p. 19
[Grand Space]
[Dynamics]
Grand Space demo
Dynamic Emphasis demo
p. 20
When you press the button
pressed in Step 2, you can
switch between demos both
with the function switched on
and off.
When a button is pressed, the demo assigned to the button is played.
Two versions of the demo will be played—one includes the function provided by the
button you’ve pressed, the other doesn’t.
Stopping the Demo of the Functions
3
Press the [Demo] button.
The [Demo] button’s indicator goes off, and the demo quits.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Performance
Performing with a Variety of Sounds
The HP103 contains 20 different internal tones. The tones are organized into five tone
groups, which are assigned to the Tone buttons.
fig.panel2-1
1
2
Selecting a tone group
Press any Tone button.
For more details, refer to
“Tone List” (p. 44).
1
The indicator of the button you pressed will light.
When you play the keyboard, you will hear a sound in the selected tone group.
Selecting variation tones
2
Press the [Variation] button.
Four different tones (numbered 1–4) are assigned to each Tone button. Use the
[Variation] button to select among them.
When Dual play (p. 23) or Split
play (p. 24) is used, only sound
number 1 or 2 can be selected.
If you use Dual play or Split
play with a Tone button for
which tone number 3 or 4 is
selected, tone number 1 will be
selected for that Tone button.
Each time you press the [Variation] button, the button’s indicator will change color,
and the four sounds will be selected successively.
Tone number
1
2
3
4
[Variation]
button’s indicator
Dark
Red
Green
Orange
Some of the number 3 and 4 tones form pairs, which can be layered and sounded
together.
The tone you’ve selected is heard when you finger the keyboard.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Performance
Adjusting the Keyboard Touch
(Key Touch)
You can adjust the touch (playing feel) of the keyboard.
fig.panel2-7
1
1
Press the [Key Touch] button.
The button’s indicator will light, and the feel of the keyboard will change.
Each time you press the [Key Touch] button, the button’s indicator will change color,
and the feel of the keyboard will change.
Indicator
OFF
Settings
This allows you to play using the most natural touch.
This is the closest to the touch of an acoustic piano.
Medium
Fortissimo (ff) cannot be produced unless you play
more strongly than usual, making the keyboard feel
heavier. Dynamic fingering adds even more feeling to
what you play.
Red
Heavy
Fortissimo (ff) can be produced by playing less strong-
ly than usual, making the keyboard feel lighter. This
setting makes it easy to play, even for children.
Green
Light
Fixed
Sounds at a fixed volume, regardless of your keyboard
playing strength.
Orange
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Performance
Adding a Sense of Depth to the Sound
(Grand Space)
The HP103 includes a “Grand Space” function that allows you to get sounds that
have a sense of depth like you get by playing an acoustic grand piano. Using this
function gives you the natural-sounding reverberation and depth of sound that an
acoustic grand piano provides.
fig.panel2-8
1
2
1
Press the [Grand Space] button, getting its indicator to light.
The Grand Space function is switched on, giving the sound a greater sense of depth.
When Grand Space Mode (p.
37) is set to “1” and a pair of
headphones is connected, the
sense of depth is optimized for
headphones, and when no
headphones are connected, the
optimal depth for speakers is
selected.
To cancel the Grand Space function, press the [Grand Space] button once more so its
illumination is turned off.
Changing the Grand Space Settings
2
Hold down the [Grand Space] button, and press the [-] or [+] button.
You can adjust the sense of depth to any of four levels.
A greater sense of depth is produced as the value is increased.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Performance
Adding the Right Sense of Depth for
Headphones (Grand Space)
You can achieve the kind of sonic depth produced with a grand piano through
headphones as well. This feature creates an ambience that makes it seem you are
seated in front of a grand piano as you perform.
1
2
1
Press the [Grand Space] button, getting its indicator to light.
The Grand Space function is switched on, giving the sound a greater sense of depth.
When Grand Space Mode (p.
37) is set to “1” and a pair of
headphones is connected, the
sense of depth is optimized for
headphones, and when no
headphones are connected, the
optimal depth for speakers is
selected.
To cancel the Grand Space function, press the [Grand Space] button once more so its
illumination is turned off.
Changing the Grand Space Settings
2
Hold down the [Grand Space] button, and press the [-] or [+] button.
You can adjust the sense of depth to any of four levels.
A greater sense of depth is produced as the value is increased.
The [
(Headphones)]
indicator lights up when
headphones are connected.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Performance
Adding Liveliness to the Sound
(Dynamic Emphasis)
You can add liveliness to the sound to give it superb clarity and distinctness.
1
2
1
Press the [Dynamics] button, getting its indicator to light.
The Dynamic Emphasis function is switched on, enlivening the sound.
To cancel the Dynamic Emphasis function, press the [Dynamics] button once more
so its illumination is turned off.
Changing the Dynamic Emphasis Settings
Hold down the [Dynamics] button, and press the [-] or [+] button.
2
Display
Description
1
2
3
Creates a sound with boosted bass and treble.
Produces a sound with chords in the low registers that are
clear and distinct.
Creates a sound with boosted bass.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Performance
Applying Effects to the Sound
fig.panel2-5
1
2
■ Adding Reverberation to the Sound (Reverb)
By applying the reverb effect you can produce a pleasant reverberation, making it
sound as though you were performing in a concert hall.
When you play back an
internal song, the reverb effect
will automatically be turned
on (the button’s indicator
lights).
1
Press the [Reverb] button.
The button’s indicator will light, and a reverb effect will be applied to the sound.
To cancel the reverb effect, press the [Reverb] button, getting its indicator to go dark.
■ Changing the depth of the reverb effect
When the power is turned on,
reverb is set to “4.”
The amount (depth) of the reverb effect can be set to any of eight levels.
2
Hold down the [Reverb] button and press the [-] or [+] button.
The currently specified value will be displayed.
Higher values will produce a deeper effect.
When you hold down the
[Reverb] button, the currently
specified reverb depth value
will be displayed.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Performance
Transposing the Key of the Keyboard
(Transpose)
By using the “Transpose function,” you can transpose your performance without
changing the notes you play. For example, even if the song is in a difficult key with
numerous sharps ( ) or flats ( ), you can transpose it to a key that is easier for you
to play.
When accompanying a vocalist, you can easily transpose the pitch to a range that is
comfortable for the singer, while still playing the notes as written (i.e., with the same
fingering positions).
fig.panel2-6
1
1
Continue to hold down the [Transpose] button, and press a note to
indicate the tonic of the key to which you want to transpose.
The button’s indicator will light, and the keyboard will be transposed.
When you hold down the
[Transpose] button, the
currently specified value will
be displayed.
You can also transpose by holding down the [Transpose] button and pressing the [-
] or [+] button.
If you hold down the [Transpose] button and press the [-] and [+] buttons
simultaneously, the setting will return to the original value (0).
This can be set in a range of -6–0–5 (semitone steps).
For example, if you want the E pitch to sound when you play the C key, hold down
the [Transpose] button and press the E key.
Counting from C as a reference point, one moves up four keys, including the black
keys, to reach E, thus “4” appears in the display.
fig.trans.e
If you play C E G
It will sound E G#
B
When the transpose value is set to “0,” the button’s indicator will remain dark even
if you press the [Transpose] button.
To cancel the transpose function, press the [Transpose] button, extinguishing its
indicator.
This setting returns to the
original value (0) when you
turn off the power.
When you press the [Transpose] button once again, getting its indicator to light, the
keyboard will be transposed to the note you specified here.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Performance
Playing Two Sounds Together
(Dual Play)
When Dual play is used, the
[Variation] button’s indicator
will light to indicate the
Simultaneously playing two tones when one key is pressed is called “Dual play.”
1
Simultaneously press the two Tone buttons that you want to play
together.
selection of the right button of
the two selected tones.
The indicator of the button you pressed will light.
When you play the keyboard, the tones of the two Tone buttons you selected will
sound simultaneously.
When Dual play is used, only
sound number 1 or 2 can be
selected.
To cancel Dual play, press any Tone button.
To change the tone of the right button of the two selected tones
If you use Dual play with a
Tone button for which tone
number 3 or 4 is selected, tone
number 1 will be selected for
that Tone button.
Press the [Variation] button.
Dual play now features the tone of the left side’s tone button along with the newly
selected tone.
To change the tone of the left button of the two selected tones
Cancel the Dual play, and then re-select the tone.
■ Adjusting the Volume Balance in Dual Play
(Dual Balance)
You can change the volume balance between the two layered sounds in Dual play.
fig.panel2-2
1
2
1
2
Hold down the [Transpose] button and press the [Split] button.
The indicators of the buttons you pressed will blink.
The current volume balance appears in the display.
Press the [-] or [+] button to change the value.
The volume balance changes.
To return to the original volume balance, press the [-] and [+] buttons
simultaneously.
fig.disp-dualbal.e
Volume of the left button tone
Volume of the right button tone
Press the [Transpose] or [Split] button, and the button’s indicator will return to the
previous state.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Performance
Playing Different Tones with the Left
and Right Hands (Split Play)
The split point key is included
in the left-hand keyboard area.
Dividing the keyboard into right-hand and left-hand areas, then playing different
sounds in each is called “Split play.” The boundary key is called the “split point.”
When Split play is used, only
tone numbers 1 or 2 can be
selected.
fig.splitpoint.e
Split Point (set to F 3, when the power is turned on.)
If you use Split play with a
Tone button for which tone
numbers 3 or 4 selected, tone
number 1 will be selected for
that Tone button.
…
A0 B0 C1 D1 E1 F1 G1 A1 B1 C2
C3
C4
C5
B7 C8
Left-hand Tone
Right-hand Tone
fig.panel2-3
1
1
Press the [Split] button.
When using Dual play,
press the [Split] button
The right hand will play the
tone of the left button of Dual
play, and the left hand will
play a suitable match for the
right-hand tone.
The button’s indicator will light.
The keyboard is divided into right-hand and left-hand areas.
The tone played on the right side is the tone in use before the [Split] button is
pressed, while the bass tone is played on the left side.
To cancel Split play, press the [Split] button, getting its indicator to go dark.
Changing tone played by the left hand
For information about the
tones that can be selected for
the left hand section, refer to
the “Tone List” (p. 44).
Press the [Variation] button.
Each time you press the [Variation] button, the button’s indicator will change color,
and the left-hand tone will change.
Some tones assign the tone that had been selected before you pressed the [Split]
button to the left hand area of the keyboard.
The selected left hand tone is
remembered for each Tone
button. When you turn off the
power, it will return to the
original setting.
Changing tone played by the right hand
Press the Tone button.
The tone of the right-hand area will change. A tone that is a suitable match for the
right-hand tone will be selected for the left-hand area.
will be applied only to the
right-hand area of the
If you want to change the variation for the right-hand tone, cancel Split play and then
re-select the tone.
keyboard. If you want the
damper pedal to be applied to
the left-hand area, refer to
“Applying the Damper Pedal
to the Left-hand Keyboard
Area” (p. 37).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Performance
■ Changing the Keyboard’s Split Point
You can change the location where the keyboard is divided (the split point) within
the range of B1 through B6.
The setting is at “F#3” when
the piano is powered up.
1
While continuing to hold the [Split] button, press the key that you want
to specify as the split point.
The split point key is
displayed as follows.
The key you pressed becomes the split point, and belongs to the left-hand section of
the keyboard.
Display
C
C
C
C
F
d
E_
E
Letter
name
You can also change the setting by pressing the [-] or [+] button while continuing to
hold down the [Split] button.
D
Display
E
F
G
G
b
Letter
name
If you hold down the [Split] button and simultaneously press the [-] and [+] buttons,
E
F
F
the setting will return to its original value (F#3).
fig.disp-splitpoint
Display
A_
A
A
b_
B
Letter
name
A
B
When you continue holding
the [Split] button, the currently
specified split point will be
displayed.
Using Metronome
■ Sounding the Metronome
The HP103 features a built-in metronome.
While a song plays back, the metronome will sound at the tempo and time signature
(Beat) of that song.
fig.panel2-4
3, 4 2, 4 1, 5
Sounding the metronome
1
Press the [Metronome/Count In] button.
The metronome will sound.
The button flashes in red and green in time with the beat selected at that time. The
button lights in red on the downbeats, and in green on weak beats.
Changing the tempo
2
3
Press the [Song/Tempo] button; the button’s indicator lights in green.
Press the [-] or [+] button to adjust the tempo.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Performance
Changing the beat of metronome
4
Hold down the [Song/Tempo] button, and press the [-] or [+] button.
The currently selected beat will be displayed.
NOTE
If you hold down the [Song/Tempo] button and press the [-] or [+] button, the beat
will change.
It is not possible to change the
beat during song playback or
recording.
If you hold down the [Song/Tempo] button and press the [-] and [+] buttons
simultaneously, the beat will go back to what it was before you changed it.
fig.disp-beat
Display
beat
Display
beat
Correspondence between
beat and tempo display
2.2
0.4
2.4
3.4
4.4
5.4
2/2
6.4
7.4
3.8
6.8
9.8
12.8
6/4
7/4
3/8
6/8
9/8
12/8
Only weak beats
2/4
3/4
4/4
5/4
Beat
2/2
Tempo Value
=10–125
x/4
=20–250
x /8
=40–500
Stopping the metronome
5
Once again press the [Metronome/Count In] button, getting the button to
go dark.
The metronome will stop.
■ Changing the Metronome Volume
The volume of the metronome can be adjusted, with nine volume levels available.
This is set to “4” when the
instrument is turned on.
1
Hold down the [Metronome/Count In] button and press the [-] or [+]
button.
The currently specified volume will be displayed.
Continue to hold down the [Metronome/Count In] button, and press the [-] or [+]
When you hold down the
[Metronome/Count In] button,
the currently specified
metronome volume will be
displayed.
button to sound the metronome, and change the volume.
fig.disp-metrovol
NOTE
When the metronome volume
is set to “0,” the metronome
sound does not play.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Performance
Splitting the Keyboard Into Two
Sections for Four-Hand Performances
(Twin Piano Mode)
You can divide the keyboard into two separate sections, allowing two people to
perform in the same registers.
C1
C2
C3
C5
C4
C6
C5
C6
C7
C8
C3
C4
C3
C4
C5
C6
1
While holding down the [Split] button and press the [Piano] button.
The [Split] button’s indicator will light, and Twin Piano Mode is switched on.
fig.panel3-1
1
The following occur when Twin Piano Mode is switched on:
• The keyboard is divided into two separate sections, and the pitch
changes.
• The right pedal now functions as the damper pedal for the right
keyboard section, and the left pedal functions as the damper pedal for
the left keyboard section.
• The center pedal now functions as the Sostenuto pedal for the right
keyboard section.
• If recording is in progress or the instrument is in recording standby,
recording is stopped or recording standby is cancelled. The [Rec] button
is disabled while Twin Piano Mode is active.
• If the Split function happens to be on, it is switched off.
• The same tone and effects are used on both the left and right sides. If the
piano is in Split Play before switching Twin Piano Mode on, then the
tone selected for the right hand in Split Play is used.
* The damper resonance function is not operational in Twin Piano Mode.
2
To exit the function, press the [Split] button.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3.
Here’s how you can play along with the internal songs.
You can slow down the playback tempo of the song, or play back each hand separately.
If you turn on the metronome
while the song plays back, the
metronome will sound at the
beat and tempo of the song.
Before you try playing the song, listen to it several times to get a general feel for the
song.
For details on operation, refer to “Selecting a Song and Playing It” (p. 13).
Changing the Tempo
Some of the internal songs
have tempos that change
during the song.
If the song has a rapid tempo, you can slow down the tempo so that you can practice
it more easily. It is effective to gradually raise the tempo as you practice.
fig.panel3-1
2 1
First select the song that you want to play back (p. 13).
Correspondence between
beat and tempo display
1
2
Press the [Song/Tempo] button, getting its indicator to light in green.
The tempo appears in the display.
Beat
2/2
Tempo Value
=10–125
Each time you press the [Song/Tempo] button, the tempo and the currently selected
song number (prefixed by “S.”) will be displayed alternately.
x/4
=20–250
While the tempo is displayed, the [Song/Tempo] button indicator will light in green.
While the song number is displayed, it will light in red.
x /8
=40–500
Press the [-] or [+] button to adjust the tempo.
Indication of the tempo
during song playback
While the song is playing, the
initial tempo of the song will
continue to be displayed,
regardless of tempo changes
during the song.
The tempo can be adjusted in a range of =20–250.
You can also change the tempo during playback.
Pressing the [+] button once increases the tempo by one unit. Holding down the
button increases the tempo continuously.
Pressing the [-] button once decreases the tempo by one unit. Holding down the
button makes the tempo change (slow down) continuously.
About the display for the
internal songs
USr (user) … The location
where you can record your
performance. (For details on
recording → p. 31)
If you press the [-] and [+] buttons simultaneously, you will return to the basic tempo
of the song (the tempo before you modified it).
■ Adding a Count-in to Match the Timing (Count-In)
When you’re playing along with a song, you can make sure that your playing is in
time with the song by sounding a count before the song starts playing.
Numbers with a “S.”
… internal songs.
Sounding a “count sound” leading up to playback of a song is called “Count-In.”
On the HP103, if you playback a song while the metronome is sounding, two
measures of lead-in count will be heard at the beginning of the song.
During the count-in, the count
measure is indicated in the
display as “-2” then “-1.”
“Sounding the Metronome”
(p. 25)
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Playing Along with the Internal Songs
Playing Each Hand Separately
The internal songs allow you to select the performance part that will be played back.
The left-hand performance of the internal songs is assigned to the [Left] button,
while the right-hand performance is assigned to the [Right] button. The place where
each part of the performance is held is called a “track,” and the [Left] and [Right]
buttons are called “track buttons.”
fig.trackbuttons.e
Track buttons
Left-hand Right-hand
Part
Part
Here’s how to practice each hand separately along with the song.
fig.panel3-2
2, 3 1
First select the song that you want to play back (p. 13).
Selecting the part that you yourself will play
1
Press the [Left] or [Right] button.
The indicator of the button you’ve pressed goes out, and the sound of the selected
part will no longer be heard.
For example, if you want to practice the right hand, press the [Right] button and get
its indicator to go dark. When you play back the song, the right-hand performance
will not sound.
Playing back a song
Press the [Play] button, getting its indicator to light.
2
The song will begin playing back. The part you selected in step 1 will not sound.
Practice your right-hand performance along with the left-hand playback.
Once again press the button you selected in step 1. The button’s indicator will light,
and the sound will be heard once again.
Even while the song is playing, you can press the track buttons to mute or un-mute
the sound.
Stopping the song
Press the [Play] button.
3
The song will stop.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
You can easily record your performances.
A recorded performance can be played back to hear your own playing, or to add
additional parts.
The following types of recording can be done using the HP103.
• Recording just your own keyboard performance (→ “Recording a New Song” p.
31)
• Recording along with an internal song (→ “Recording Along with a Song” p. 32)
• Recording each hand separately (→ “Selecting and Recording the Track for Each
Hand Separately” p. 33)
■ Notes Regarding Recording
• Only one song can be recorded.
• Recorded performances are erased when the power is turned off. If you want to
keep your performance, you can either record it on an external audio device, or
use an external MIDI device to save the performance data on a floppy disk. For
details, refer to “Chapter 6. Connecting External Devices” (p. 39).
If you see the following...
If you attempt to record using a different internal song when a performance has
already been recorded, the following will appear, and the indicators of [Rec] and
[Play] button will blink.
fig.disp-del
If it is OK to erase the performance, press the [Rec] button.
If you do not want to erase the performance, press the [Play] button.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4. Recording Your Performance
Recording a New Song
Record only the keyboard performance without playing along with an internal song.
fig.panel4-1
3
2 1 4 6,7,8 5,7
Recording settings (select “USr”)
NOTE
If you layer a newly recorded
1
2
Press the [Song/Tempo] button, getting its indicator to light in red.
performance without erasing
the recorded song, the song
tempo and beat will be stored
with the settings that were
recorded first.
Press [-] and [+] buttons simultaneously, and “USr” appears in the
display.
Specifying the tone and tempo for recording
About the “USr” display
When you stop recording, the
3
4
Select the tone that you want to play (p. 16).
If necessary, turn on the metronome.
“
” display will change
to “
.”
Sound the metronome while you set the tempo and beat of the song (p. 25).
The “.” in the lower right of the
display indicates that there is
already a recorded
5
Press the [Rec] button.
The [Rec] button’s indicator will light, the [Play] button’s indicator will blink, and
you will be in recording-standby mode.
performance.
Start recording
Recording will start when you either press the [Play] button or play the
When recording songs that
start on an upbeat (that start
on a beat other than the first
beat of the measure), press the
[Rec] button to put the HP103
into recording standby, then
press the [Play] button. Two
measures of count sound are
played, and then recording
begins.
6
keyboard.
Two measures of the count sound are played, and the recording begins.
Note that recording will also begin as soon as you play anything on the keyboard,
even if you do not press the [Play] button. There is no count sound played when you
start in this manner.
When recording begins, the [Play] button and [Rec] button indicators will light.
Go ahead and perform on the keyboard.
Stop recording
Press the [Play] or [Rec] button.
7
If you record without
specifying the recording track,
the performance will be
Recording will stop, and the indicators for the [Play] and [Rec] buttons will go dark.
recorded to the [Left] button.
If you want to record the right
and left hands separately on
separate recording tracks, refer
to “Selecting and Recording
the Track for Each Hand
Separately” (p. 33).
Play back the recorded performance
8
Press the [Play] button.
You will hear the recorded performance.
Once again press the [Play] button, and playback will stop.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4. Recording Your Performance
Recording Along with a Song
You can record a performance that you play along with an internal song.
Using the [Left] or [Right] buttons, you can perform and record just the right-hand
part of a song while listening to the left-hand playback of an internal song.
fig.panel4-3
2 1 3 6,7,8 4,7 5
Selecting the song to record
1
Press the [Song/Tempo] button, getting its indicator to light in red.
The display will indicate the song number for several seconds.
2
3
4
Use the [-] or [+] button to select the song that you want to play.
As necessary, set the metronome and tempo (p. 25).
Press the [Rec] button.
The [Rec] button’s indicator will light.
Selecting the track to record
If “dEL” appears in the
display, refer to p. 30.
5
Press the [Left] or [Right] button.
When you want to record the left-hand performance, press the [Left] button; to
record that of the right hand, press the [Right] button.
The indicators of the button you pressed and of the [Play] button will blink, and the
HP103 enters recording-standby mode.
Starting to record
Press the [Play] button.
6
Recording begins after two measures of count sound.
Play along with the song.
Stop recording
Press the [Play] or [Rec] button.
7
Recording will stop, and the indicators for the [Play] and [Rec] buttons will go dark.
The recorded performance is stored in “USr (User).”
Play back the recorded performance
8
Press the [Play] button.
You will hear the recorded performance.
Once again press the [Play] button, and playback will stop.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4. Recording Your Performance
Selecting and Recording the Track for Each
Hand Separately
The recorder of the HP103 has two recording tracks, allowing you to record the right
and left hands separately. Use the [Left] button or [Right] button to specify the
recording track.
If you want to re-do the recording, you can re-record just a specific track.
fig.panel4-4
1 4,5,6 2,5 3
As described in steps 1and 2of “Recording a New Song” (p. 31), select “USr” before
you continue. When layering recordings with built-in songs, select the built-in song
as described in Steps 1 and 2 of “Selecting a Song and Playing It” (p. 13).
NOTE
If you go on to record
additional material without
erasing the recorded song, the
song tempo, beat, and
1
2
As necessary, turn on the metronome (p. 25).
metronome settings of the
original recording will be used
for the new material as well.
Press the [Rec] button.
The [Rec] button’s indicator will light.
The button indicators of tracks that are already recorded will light.
The track button for which you will next be recording will be blinking.
Selecting the track to record
3
Press the [Left] or [Right] button to select the track that you want to
record.
The indicator of the button you pressed will blink, and the HP103 enters recording-
standby mode.
The track buttons allow you to
record to either the [Left] or
the [Right] button, one at a
time.
Start recording
Press the [Play] button.
4
Two measures of the count sound are played, and the recording begins. Go ahead
and perform on the keyboard.
Note that recording will also begin as soon as you play anything on the keyboard,
even if you do not press the [Play] button. There is no count sound played when you
start in this manner.
Stop recording
Press the [Play] or [Rec] button.
5
Recording will stop, and the indicators for the [Play] and [Rec] buttons will go dark.
Your performance has been recorded to the specified track button.
If you want to record on the other track, return to step 2 to record your performance
again. You can record while you listen to the previously recorded performance.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4. Recording Your Performance
Play back the recorded performance
6
Press the [Play] button.
You will hear the recorded performance.
Press the [Play] button once again, and playback will stop.
Erasing Recorded Performances
You can erase a recorded performance.
■ Erasing a Performance from the Specified Track
You can select a recorded track and erase it.
1
Hold down either the [Left] or [Right] button and press the [Rec] button.
The indicator of the button you pressed will go dark, and the performance of the
selected track will be erased.
■ Erasing a Song
You can erase a song you’ve recorded.
1
Hold down the [Song/Tempo] button and press the [Rec] button.
The following display will appear, and the indicators of the [Rec] and [Play] button
will blink.
fig.disp-del
If you decide not to erase the performance, press the [Play] button.
2
Once again press the [Rec] button.
The recorded performance is erased.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5. Changing Various Settings
Button
Function
Page
Changing the Damper
Pedal’s Resonance
On an acoustic piano, depressing the damper pedal makes
the notes you play resonate with other strings, adding rich
reverberations and fatness to the sound. The damper pedal
on the HP103 recreates this resonance (damper resonance)
when depressed.
Temperament
[E. Piano]
p. 36
Stretch Tuning
[Harpsi]
[Organ]
p. 37
p. 37
You can select from eight levels of depth for the resonant
sound (resonance level).
Applying the damper pedal
to the left-hand keyboard
area
This is set to “5” when the instrument is turned on.
*
This setting is enabled only with the piano tones. You cannot
set this for other tones.
1. Hold down the [Brilliance] button, and press the [-] or
MIDI send channel
Local Control
[+] button.
[Strings]
p. 41
p. 41
The currently specified value will be displayed.
Larger values will produce a deeper effect.
fig.disp-reso
[Variation]
Transmitting a recorded
performance
Making Detailed Settings
(Function)
[Play]
p. 41
You can make performance-related settings such as tuning
and temperament.
Grand Space Mode
V-LINK
How to enter function mode
[Grand Space]
[Right]
p. 37
p. 38
1. Hold down the [Split] button, and press the [Reverb]
button.
The HP103 switches to the function mode.
The indicators for the [Split] and [Reverb] buttons and
the button to which the function is assigned start
flashing.
For details on each function, refer to the explanations
below.
Setting the various functions
2. Press the button to which the desired function is
3. Press the [-] or [+] button to change the value.
assigned.
The indicators for pressed button, [Split] button, and
[Reverb] button flash.
If you press the [-] and [+] buttons simultaneously, the
For details on the contents of each function, refer to the
explanations that follow.
How to exit function mode
4. Press the [Split] or [Reverb] button.
The button’s indicator will return to the previous state.
Button
[Piano]
Function
Page
Master Tuning
p. 36
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5. Changing Various Settings
■ Tuning to Other Instruments’
Dis-
play
Temper-
ament
Qualities
Pitches (Master Tuning)
This tuning, devised by the
philosopher Pythagoras, eliminates
dissonance in fourths and fifths.
Dissonance is produced by third-
interval chords, but melodies are
euphonious.
In situations such as when playing ensemble with other
pitch of another instrument. The standard pitch generally
refers to the pitch of the note that’s played when you finger
the middle A key. This tuning of all the instruments to a
standard pitch is called “tuning.”
Pythagor
ean
2
3
This tuning eliminates ambiguities in
the fifths and thirds. It is unsuited to
playing melodies and cannot be
transposed, but is capable of
beautiful sonorities.
Just
Major
If you press the [Piano] button in step 2 of “Making
Detailed Settings (Function)” (p. 35), a display like the
following will appear.
fig.disp-tune
The Just tunings differ from major
and minor keys. You can get the
same effect with the minor scale as
with the major scale.
Just
Minor
4
5
6
This scale makes some compromises
in just intonation, enabling
transposition to other keys.
Mean
Tone
The last three digits are indicated in the display. “440.0 Hz”
is indicated in the figure above.
This temperament combines the
Mean Tone and Pythagorean
tunings. Performances are possible in
all keys (first technique, III).
Value
415.3 Hz–440.0 Hz–466.2 Hz
Werck-
meister
Power-up default setting 440.0 Hz
This setting remains in effect until you turn off the power.
This is an improvement of the Mean
Tone and Just tunings that provides a
high degree of freedom of
modulation. Performances are
possible in all keys (III).
■ Changing the Temperament
Kirn-
berger
7
You can play classical styles such as Baroque using historic
temperaments (tuning methods).
Today, compositions are generally created with equal
temperament in mind and are played using equal
temperament. However in past ages of classical music, a
variety of temperaments were used. Playing a composition
with its original tuning lets you enjoy the sonorities of the
chords that the composer originally intended.
Power-up default setting 1 C
Tonic
When playing with tuning other than equal temperament,
you need to specify the tonic note for tuning the song to be
performed (that is, the note that corresponds to C for a major
key or to A for a minor key).
If you press the [E.Piano] button in step 2 of “Making
While hold down the [E. Piano] button, and press a note to
Detailed Settings (Function)” (p. 35), a display like the
specify the desired tonic key.
following will appear.
fig.disp-temp.j
The tonic note you specify will be displayed as follows.
fig.Chart_note2.j
Display
C
C
C
C
d
E_
E
E
E
F
F
F
F
G
G
A_
A
A
A
b_
B
b
Letter
name
D
B
Temperament Tonic
If you choose an equal temperament, there’s no need to select
a tonic note.
You can choose from among the seven temperaments
described below.
*
*
If you record with a temperament other than equal
temperament selected, and then want to play back that
performance, use this setting to select the same temperament
for playback as the temperament you used when recording.
Dis-
play
Temper-
ament
Qualities
In this tuning, each octave is divided
into twelve equal steps. Every
interval produces about the same
amount of slight dissonance. This
setting is in effect when you turn on
the power.
When performing in ensemble with other instruments, be
aware that depending on the key, there may be some shifting of
the pitch. Tune the HP103 to the fundamental pitch of the
other instruments.
1
Equal
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5. Changing Various Settings
Applied (Grand Space Mode)
A piano is generally tuned to a pitch with a lower bass range
and a higher treble range than equal temperament. This
special tuning method for pianos is called “Stretch Tuning.”
If you press the [Grand Space] button in step 2 of “Making
Detailed Settings (Function)” (p. 35), a display like the
following will appear.
If you press the [Harpsi] button in step 2 of “Making
Detailed Settings (Function)” (p. 35), a display like the
following will appear.
fig.disp-On
Display
1
Descriptions
When the headphones are connected, the
depth effect is optimized for headphones, and
when no headphones are connected, the
optimal depth for speakers is applied.
Display
Descriptions
This is the standard tuning curve. This is the
right choice when using Dual play (p. 23), or
when playing in ensemble with other instru-
ments.
The optimal depth for speakers is used,
regardless of whether or not headphones are
connected.
Grand Space is also applied to the sound
output from the Output jacks, making this
convenient when you want to play through
speakers connected to the Output jacks.
OFF
2
3
This tuning curve expands the bass and tre-
ble ends somewhat. It is suitable for perfor-
mances such as piano solos. This setting is in
effect when you turn on the power.
On
The optimal depth for headphones is used,
regardless of whether or not headphones are
connected.
Power-up default setting On
→ This effect works only with the piano tones.
When you are using Split play (p. 24), you can apply the
damper pedal effect to the sound played by the left-hand
keyboard range.
If you press the [Organ] button in step 2 of “Making
Detailed Settings (Function)” (p. 35), a display like the
following will appear.
fig.disp-Off
Display
On
Descriptions
The damper pedal effect will be applied to
the sound of the left and right hand key-
board area.
The damper pedal effect will not be applied
to the sound of the left-hand keyboard area.
OFF
Power-up default setting OFF
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5. Changing Various Settings
Preventing the Settings from
Changing During Performance
Using the V-LINK function
Connecting the HP103 to a V-LINK compatible image device
allows you to control the images with the HP103.
■ Disabling Everything Except
V-LINK
Piano Play (Panel Lock)
The “Panel Lock” function locks the HP103 in a state where
only piano performance can be used, and all buttons will be
disabled. This prevents the settings from being inadvertently
modified even if children press the buttons accidentally.
In the Panel Lock state, only the grand piano sound can be
played.
V-LINK (
) is a function that allows music and
images to be performed together. By using MIDI to connect
two or more V-LINK compatible devices, you can easily
enjoy a wide range of visual effects that are linked to the
expressive elements of a music performance.
How to Use the V-LINK
1. Turn the volume to the minimum, and press the [Power
1. Hold down the [Split] button, and press the [Reverb]
On] switch to turn off the power.
button.
2. Hold down the [Piano] button and press the [Power
The HP103 switches to the set mode.
2. Press the [Right] button.
On] switch to turn on the power.
The following display will appear.
fig.disp—-
The button’s indicator flashes.
The following appears in the display.
fig.
All buttons are disabled.
Adjust the volume.
When you play the keyboard, the grand piano sound
will be heard.
Display
OFF
Descriptions
To defeat the Panel Lock function, turn the volume down
to the minimum, and turn on the power once again.
The V-LINK function is switched off.
The V-LINK function is switched on. You
can control images using the twelve keys at
the left end of the keyboard.
On
■ Disabling the Buttons When
Using a Tone Other Than Piano
(Tone Lock)
Power-up default setting OFF
3. Press the [-] and [+] buttons to switch the V-LINK
Even when using Tones other than the Piano, you can set the
instrument so all of its buttons are disabled (the settings in
effect at that time will be maintained). That way, you won't
get switched to the wrong settings if you inadvertently press
a few buttons while you’re playing.
function on and off.
You can control images using the twelve keys at the left
end of the keyboard.
While V-LINK is switched on, the following will appear
in the display.
1. Hold down the [Demo] button and press the [Key
Touch] button.
The song or the metronome sound that is playing will
stop. The following will appear in the display:
fig.disp—-
*
While V-LINK is switched on, no sound is produced when you
press any of the twelve keys at the left end of the keyboard.
How to exit function mode
All buttons are disabled while the instrument is set like this.
To cancel the Tone Lock function, once again hold down
the [Demo] button while you press the [Key Touch]
button. Alternatively, you can lower the instrument’s
volume all the way and switch its power off. Then, turn
it on again.
4. Press the [Split] or [Reverb] button.
The button’s indicator returns to its original state.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6. Connecting External Devices
❍ Use the following procedure when turning on the power.
Connecting to Audio Equipment
You can connect audio devices to play the sound of the
1. Turn on the power of the connected device.
HP103 through the speakers of your audio system, or to
2. Turn on the power of the HP103.
record your performance on a tape recorder or other
3. Adjust the volume of each device.
recording device.
When connecting, please use an audio cable with a standard
phone plug (sold separately).
*
You cannot use the HP103 to adjust the volume of the
connected sound generating device.
Turning off the power
Connection Examples
1. Set the volume of the HP103 and of the connected
*
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
devices to the minimum position.
2. Turn off the power to the HP103.
3. Turn off the connected equipment.
Playing the sound of the HP103 through the
speakers of an audio system/Recording the
performance of the HP103 on a recording device
fig.audio1.e
Input R/L
(Line In, Aux In)
Connecting to a Computer
You can use a USB MIDI interface cable (sold separately) to
connect the HP103 to your computer.
HP103
If the HP103 is connected to a computer in which sequencer
software such as Roland’s “Visual MT” is installed, a song
you’ve recorded on the HP103 can be saved on your
computer.
❍ Use the following procedure when turning on the power.
1. Turn on the power of the HP103.
Connection Examples
*
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
2. Turn on the power of the connected device.
3. Adjust the volume of each device.
*
In order to make connections to your computer, you must
install “MIDI driver” software on your computer. For details,
refer to the owner’s manual for your MIDI interface.
→ You can adjust the volume of a connected sound module with
the HP103.
When Recording HP103 Performances on a Recording
Device
Use a USB MIDI interface cable to connect the USB
connector of your computer to the MIDI connectors of
the HP103.
4. Start recording with the connected device.
5. Perform on the HP103.
fig.comp.e
USB Connector
of your Computer
6. When the performance ends, stop recording on the
connected equipment.
UM-1 etc.
MIDI IN
Computer
Playing the sound of an audio device through the
speakers of the HP103
fig.audio2.e
MIDI OUT
Output R/L
(Line Out, Aux Out)
HP103
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6. Connecting External Devices
Perform on the HP103 to play a MIDI sound
generator
fig.midi1.e
Connecting MIDI Devices
By connecting an external MIDI device and exchanging
performance data, you can control the performances on one
device from the other. For instance, you can output sound
from the other instrument or switch tones on the other
instrument.
Sound Module
MIDI
THRU
OUT
IN
HP103
■ What’s MIDI?
MIDI stands for Musical Instrument Digital Interface, an
international standard which allows performance
information to be communicated among electronic musical
instruments and computers.
The HP103 provides MIDI connectors, which allow
performance data to be exchanged with external devices.
When these connectors are used to connect the HP103 to
external devices, an even wider range of possibilities
becomes available.
Making MIDI-related Settings
Here’s how you can set the transmit channel and other MIDI-
related settings.
How to enter function mode
*
A separate publication titled “MIDI Implementation” is also
available. It provides complete details concerning the way
MIDI has been implemented on this unit. If you should require
this publication (such as when you intend to carry out byte-
level programming), please contact the nearest Roland Service
Center or authorized Roland distributor.
1. Hold down the [Split] button and press the [Reverb]
button.
The HP103 switches to the set mode.
The indicators for the [Split] and [Reverb] buttons and
the button to which the function is assigned start
flashing.
Connection Examples
*
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
Setting various functions
2. Press the button to which the desired function is
assigned.
Playing the HP103 from a MIDI sequencer/
Recording an HP103 performance on a MIDI
sequencer
fig.midi2.e
The indicators for pressed button, [Split] button, and
[Reverb] button flash.
For details on the contents of each function, refer to the
explanations that follow.
MT Series
* MT-90s has no MIDI Out connector.
3. Press the [-] or [+] button to change the value.
Out
MIDI
In
If you press the [-] and [+] buttons simultaneously, the
setting will return to the original value.
HP103
How to exit function mode
4. Press either the [Split] button or the [Reverb] button.
The button’s indicator will return to the previous state.
*
Set Local Off if you have connected the HP103 to a MIDI
sequencer. Refer to “Switching Local Control on and Off” (p.
41). Also set your MIDI sequencer to MIDI Thru mode (so
that messages received at MIDI IN will be re-transmitted
without change from MIDI OUT). For details, refer to the
owner’s manual of your MIDI sequencer.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6. Connecting External Devices
Local Control OFF: The keyboard and the internal sound
generator are in an unlinked state. No sound will be
produced by the keyboard when it is played.
fig.localoff.e
■ MIDI Send Channel Settings
MIDI features sixteen MIDI channels, numbered 1–16.
to take place. The connected devices must be set to use the
same MIDI channels. Otherwise, no sound will be produced,
and no sounds can be selected.
No sound produced
Sound Generator
Local Off
*
The HP103 receives all channels 1–16.
If you press the [Strings] button in step 2 of “Making MIDI-
related settings” (p. 40), a display like the following will
*
When a Roland MT series instrument is connected, it is not
necessary to make the Local Off setting. MT units transmit
Local Off messages when their power is switched on. If you
turn on the power in the order of the HP103 → MT series,
Local Off will be set automatically.
appear.
fig.disp-1
If you press the [Variation] button in step 2 of “Making
MIDI-related settings” (p. 40), a display like the following
will appear.
fig.disp-on
Value
1–16
1
Power-up default setting
■ Switching Local Control on and
Off
When connecting a MIDI sequencer, set Local Control to
“OFF.”
Value
On, OFF
On
Power-up default setting
As illustrated, information describing what has been played
on the keyboard is passed to the internal sound generator
over two different routes, (1) and (2). As a result, you hear
overlapping or intermittent sounds. To prevent this from
happening, route (1) must be severed, by setting the unit to
You Recorded
If you want to transmit a performance recorded on the
HP103 to an external MIDI device or computer, turn this
setting “On.” If this is “OFF,” the data will not be
transmitted.
what is known as “Local Off.”
fig.localcont.e
Local On
(1)
If you press the [Play] button in step 2 of “Making MIDI-
Sequencer
Memory
related settings” (p. 40), a display like the following will
appear.
fig.disp-Off
MIDI
OUT
MIDI
IN
Sound
Generator
MIDI
OUT
MIDI
IN
(2) Thru function On
Each note played
is sounded twice
Value
On, OFF
Power-up default setting OFF
Local Control ON: The keyboard and the internal sound
If you wish to save the performance recorded on the HP103,
use the following procedure. In this situation, your external
sequencer is set its MIDI Thru feature to be OFF. For details,
refer to the owner’s manual of your MIDI sequencer.
generator are in a linked state.
fig.localon.e
Sound is emitted
Sound Generator
Local On
1. Connect a MIDI sequencer such as the MT series (p.
40).
2. Record the performance on the HP103 (p. 30).
3. Set this setting to “On.”
4. Start recording with the connected MIDI sequencer.
5. Start playback of the recorded song on the HP103.
6. When playback ends, stop recording with the
connected MIDI sequencer.
7. Use a connected MIDI sequencer to save the data on a
floppy disk or other media.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Appen
dices
If you think there’s a problem, read this first.
Case
Cause/Remedy
Case
Cause/Remedy
The maximum number of notes that the HP103
can play simultaneously is 64.
The power doesn’t
come on
Is the power cord connected and plugged in
correctly? (p. 10)
Not all played notes
are sounded
Frequent use of the damper pedal when
playing along with a song may result in
performance data with too many notes,
causing some notes to drop out.
Is the panel locked? (p. 38)
Is the Tone locked? (p. 38)
The button doesn’t
work
Turn the power off, then back on.
Have you set Transpose? (p. 22)
Is the volume level of the HP103 turned all the
way down? (p. 12)
The tuning or pitch
of the keyboard or
song is off
Are the settings for the “Temperament” and
“Stretch Tuning” correct? (p. 36)
Are headphones plugged in? (p. 11)
Has a plug remained connected to the Phones
jack?
Is the setting for the “Master Tuning” correct?
(p. 36)
When headphones are connected, the
keyboard’s speaker stops playing.
Song doesn’t play
back/ Only the
Are the indicator for the Track buttons ([Left]
and [Right] buttons) extinguished? (p. 29)
No sound is heard
Is Local Off selected?
sound of a particular If the button indicator is out, the music on that
When Local Control is set to OFF, no sound is
produced by playing the keyboard. Set Local
Control to “On” (p. 41).
track is not heard. Press the track button so the
indicator is illuminated.
instrument in a song
does not play
Has one of the track buttons for recording been
selected? (p. 30–p. 33)
Can’t record
Is V-LINK switched on?
While V-LINK is switched on, no sound is
produced when you press any of the twelve
keys at the left end of the keyboard (p. 38).
If you select an internal song in which the
tempo changes during the song, and then
record, the tempo will change in the same way
for the performances. The tempo of the
metronome will also change in the same way.
Have all devices been switched on?
No sound is heard
(when a MIDI
instrument is
connected)
Tempo of recorded
song or metronome
is off
Are the MIDI cables connected correctly?
If you record additional material without
erasing the previously recorded song, the song
will be recorded at the first-recorded tempo.
Please erase the previously recorded song
before you re-record (p. 34).
Does the MIDI channel match the connected
instrument? (p. 41)
Is the HP103 in Dual play? (p. 23)
Sounds are heard
twice (doubled)
when the keyboard
is played
When the HP103 is connected to an external
sequencer, set it to the Local OFF mode (p. 41).
Alternatively, the sequencer could be set so its
MIDI Thru feature is OFF.
Any performance that has been recorded is
deleted when the power to the HP103 is turned
off. A performance cannot be restored once it’s
been deleted.
The recorded
performance has
disappeared
If you use Dual play or Split play with a Tone
button (p. 16).
Depressing a pedal
has no effect, or the
pedal effect doesn’t
stop
Is the pedal connected correctly?
The tone has
Make sure the pedal cord is securely connected
to the pedal jack on the rear of the unit (p. 10).
changed in the Split
or Dual play
Some tones assign the tone that had been
selected before you pressed the [Split] button
to the left hand area of the keyboard. Please
refer to “Tone List” (p. 44).
Adjust the adjuster underneath the pedal so
that the adjuster presses firmly against the
floor surface (p. 12).
The pedal rattles
Is the panel locked? (p. 38)
Is the Tone locked? (p. 38)
Since the H103’s piano sounds accurately
reproduce the depth and reverberation of the
original acoustic piano, you may find that
reverberation is audible when the Grand Space
is enabled.
Turn the power off, then back on.
Reverberation still
audible even with
Reverb turned off
Tone doesn’t
change
Are the indicators for the [Split] and [Reverb]
buttons flashing?
Setting of functions is in progress. Press the
[Split] or [Reverb] button to exit function mode
(p. 35, p. 40).
If you want to eliminate the reverberation, turn
off the Grand Space function (p. 18-19).
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages/Other Messages
Case
Cause/Remedy
Case
Cause/Remedy
On an acoustic piano, notes in the upper one
and a half octaves of the keyboard continue to
sound until they decay naturally, regardless of
the damper pedal. There is a difference in the
timbre as well. Roland pianos faithfully
simulate such characteristics of the acoustic
piano. On the HP103, the range that is
When listening through speakers:
Playing at loud volumes may cause
instruments near the HP103 to resonate.
Resonation can also occur with fluorescent
light tubes, glass doors, and other objects.
In particular, this problem occurs more
easily when the bass component is
increased, and when the sound is played at
higher volumes. Use the following
measures to suppress such resonance.
• Place speakers so they are 10–15 cm from
walls and other surfaces.
In the upper range,
the sound changes
abruptly beyond a
certain key
unaffected by the damper pedal will change
depending on the Key Transpose setting.
The bass range
sounds odd, or
there is a vibrating
resonance
When listening through headphones:
Some of the more flamboyant and
effervescent piano tones feature an ample
high-end component, which may make the
sound appear to have metallic
• Reduce the volume.
• Move the speakers away from any
resonating objects.
reverberation added. Since this
When listening through headphones:
Here, a different cause would be suspect.
Consult your Roland dealer or nearest
Roland Service Center.
reverberation becomes particularly
audible when supplemented by heavy
reverb, you may be able to diminish the
problem by reducing the amount of reverb
applied to the sound.
A High-pitched
whine is produced
The volume level of
the instrument
Could you be using a connection cable that
contains a resistor?
When listening through speakers:
Here, a different cause (such as resonance
produced by the HP103) would be suspect.
Consult your Roland dealer or nearest
Roland Service Center.
Use a connection cable that does not contain a
resistor.
connected to Input
jacks is too low
Display
Meaning
USr
User Song. Stores recorded performances (p. 31).
The “.” in the display indicates that there is performance material already
recorded (p. 31).
Usr.
S.
Internal song number (p. 13).
This appears when a song with a pickup (a song that does not start on the first
beat) is played back.
PU
dEL
E.32
This appears when you attempt to delete a recorded song (p. 30, p. 34).
The amount of performance information is too large, and further recording is
not possible.
A problem such as a loose MIDI cable occurred. Make sure the MIDI cables
are correctly hooked up.
E.41
_._._.
V-LINK function is On (p. 38).
*
Error messages are indicated by an “E.” before the number. Press any button, and you can cancel the error message.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Tone List
[Split] Off
[Split] On
[Variation]
Button name
Tone
[Variation] Dark
[Variation] Red
[Variation] Green
Grand Piano /
Acoustic Bass +
Cymbal
Grand Piano /
Acoustic Bass
Dark
Grand Piano
Mellow Piano
Grand Piano / Strings
Mellow Piano /
Acoustic Bass +
Cymbal
Mellow Piano /
Acoustic Bass
[Piano]
Red
Mellow Piano / Strings
Green
Piano + Strings
Piano + Choir
Orange
Electric Piano1 /
Electric Bass
Electric Piano1 /
Acoustic Bass
Electric Piano1 /
Strings
Dark
Electric Piano1
Electric Piano2
Electric Piano2 /
Electric Bass
Electric Piano2 /
Acoustic Bass
Electric Piano2 /
Strings
Red
[E. Piano]
Green
Vibraphone
Orange
Electric Piano + Choir
Harpsichord /
Organ Flute
Harpsichord /
Acoustic Bass
Dark
Harpsichord
Harpsichord / Strings
CoupledHarpsichord/
Strings
CoupledHarpsichord/
Organ Flute
CoupledHarpsichord/
Acoustic Bass
Red
Coupled Harpsichord
[Harpsi]
Green
Harpsichord + Strings
Harpsichord + Choir
Orange
Church Organ 1 /
Organ Bass
Church Organ 1 /
Strings
Church Organ 1 /
Choir
Dark
Church Organ 1
Organ Flute
OrganFlute /
Organ Bass
Red
OrganFlute / Strings
OrganFlute / Choir
[Organ]
Green
Orange
Dark
Rotary Organ
Church Organ 2
Slow Strings
Strings / Pizzicato
Jazz Scat / Choir
Jazz Scat /
Voice Bass
Jazz Scat /
Red
Jazz Scat
Acoustic Bass
[Strings]
Green
Strings
Choir
Orange
*
A+B: simultaneously playing two tones
You can change the volume balance between the two tones, refer to “Adjusting the Volume Balance in Dual Play (Dual Balance)” (p. 23).
A/B: A, the right-hand tone; and B, the left-hand tone in Split play
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Internal Song List
Song
Song Name
No.
Composer
Copyright
S. 1
S. 2
S. 3
S. 4
La Fille aux Cheveux de Lin
Late Night Chopin
Fly Free
C. Debussy
© 2004 Roland Corporation
© 2002 Roland Corporation
© 1998 Roland Corporation
© 2000 Roland Corporation
F. Chopin/
Arranged by John Maul
John Maul
Masashi & Kazuko
Hirashita
L'éveil del l'amour
S. 5
Sonate für Klavier No. 15
Liebesträume III
Étude, op.10-3
W. A. Mozart
F. Liszt
© 1996 Roland Corporation
© 2001 Roland Corporation
© 2001 Roland Corporation
© 1997 Roland Corporation
© 2001 Roland Corporation
© 1995 Roland Corporation
© 2001 Roland Corporation
© 1995 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1995 Roland Corporation
© 1997 Roland Corporation
© 1995 Roland Corporation
© 1998 Roland Corporation
© 2001 Roland Corporation
© 1995 Roland Corporation
© 1995 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
S. 6
S. 7
F. Chopin
S. 8
Je te veux
E. Satie
S. 9
Valse, op.64-1
F. Chopin
S. 10
S. 11
S. 12
S. 13
S. 14
S. 15
S. 16
S. 17
S. 18
S. 19
S. 20
S. 21
S. 22
S. 23
S. 24
S. 25
S. 26
S. 27
S. 28
S. 29
S. 30
S. 31
S. 32
S. 33
S. 34
S. 35
S. 36
S. 37
S. 38
S. 39
S. 40
Golliwog’s Cake walk
Fantaisie-Impromptu
1ére Arabesque
C. Debussy
F. Chopin
C. Debussy
J. Strauss (II)
F. Mendelsshon
F. Chopin
An der schönen, blauen Donau
Auf Flügeln des Gesanges
Mazurka No.5
1ère Gymnopédie
Étude, op.25-1
E. Satie
F. Chopin
Clair de Lune
C. Debussy
F. Chopin
Étude, op.10-5
Doctor Gradus ad Parnassum
Grande Valse Brillante
La prière d'une Vierge
Course en Troïka
To The Spring
C. Debussy
F. Chopin
T. Badarzewska
P. Tchaikovsky
E. Grieg
Valse, op.64-2
F. Chopin
Radetzky Marsch
Träumerei
J. Strauss (I)
R. Schumann
F. Schubert
F. Chopin
Moments Musicaux III
Prélude, op.28-15
The harmonious blacksmith
Ungarische Tänze V
Türkischer Marsch
Nocturne No.2
G. Handel
J. Brähms
L. v. Beethoven
F. Chopin
Frühlingslied
F. Mendelsshon
J. S. Bach
Präludium
Jägerlied
F. Mendelsshon
M. Ravel
Menuet Antique
Für Elise
L. v. Beethoven
W. A. Mozart
F. Schubert
Türkischer Marsch
Ständchen
S. 41
Humoreske
© 1996 Roland Corporation
A. Dvorák
G. Lange
T. Oesten
S. 42
S. 43
Blumenlied
© 1996 Roland Corporation
© 1996 Roland Corporation
Alpenglöckchen
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Internal Song List
Song
No.
Song Name
Composer
Copyright
S. 44
S. 45
S. 46
S. 47
S. 48
S. 49
S. 50
S. 51
S. 52
S. 53
S. 54
S. 55
S. 56
S. 57
S. 58
S. 59
S. 60
S. 61
S. 62
S. 63
S. 64
Menuett G dur
Venezianisches Gondellied
Alpenabendröte
Farewell to the Piano
Brautchor
L. v. Beethoven
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1992 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
© 1996 Roland Corporation
F. Mendelsshon
T. Oesten
L. v. Beethoven
R. Wagner
W. Anderson
C. Czerny
Battle of Waterloo
Wiener Marsch
Le Coucou
L. C. Daquin
J. S. Bach
Menuett G dur
Spinnerlied
A. Ellmenreich
F. Gossec
Gavotte
Heidenröslein
Zigeuner Tanz
La Cinquantaine
Csikos Post
G. Lange
H. Lichner
G. Marie
H. Necke
Dolly’s Dreaming Awakening
La Violette
T. Oesten
L. Streabbog
R. Schumann
M. Clementi
F. Kuhlau
Fröhlicher Landmann
Sonatine op.36-1
Sonatine op.20-1
Sonatine No.5
L. v. Beethoven
Hungarian Rag: Hungarian Dance No. 5 Ragtime Arrangement For
Solo Piano
J. Brahms/
S. 65
S. 66
© 1996 Roland Corporation
© 1998 Roland Corporation
Arranged by John Maul
Paganini Boogie: Jazz Variation Based on “Caprice No. 24 in A
Minor”
N. Paganini/
Arranged by John Maul
*
All rights reserved. Unauthorized use of this material for purposes other than private, personal enjoyment is a violation of applicable laws.
Profile
John Maul
John Maul is a musician, composer and arranger having graduated from the Royal Academy of Music in London. John’s work
encompasses studio recordings and live performances including work with top UK Jazz artists.
His writing credits include commercial music for BBC radio and television, as well as scoring jazz and classical works.
Having been a product specialist for Roland U.K., John is now actively involved in music software composing/programming for
both Roland Japan and various music publishers. Quite recently his “Musical Picture Book,” a volume of original piano music
encompassing all standards of musical ability, which included the piano and orchestral accompaniment data in SMF format, was
published and printed.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Easy Operation List
2
3
4
5
6
7
8
9
1
6
5
4
1
3
2
1
1
No.
You want to
Buttons
Page
p. 27
Press the [Split] and [Piano] buttons simultaneously.
[Split]+ [Piano]
Twin Piano Mode
1
Press the [Split] and [Reverb] buttons simultaneously, and press the [●] button.
[Split]+ [Reverb] → [Grand Space]
p. 37
p. 36
Grand Space Mode
Master Tuning
1
2
[Split]+ [Reverb] → [Piano]
Selecting a temperament
Specifying the keynote
[Split]+ [Reverb] → [E. Piano]
p. 36
p. 37
p. 37
3
4
5
→ [E. Piano] + key
[Split]+ [Reverb] → [Harpsi]
Stretch tuning
Applying the damper pedal to the left-hand
keyboard area
[Split]+ [Reverb] → [Organ]
[Split]+ [Reverb] → [Strings]
[Split]+ [Reverb] → [Variation]
[Split]+ [Reverb] → [Play]
[Split]+ [Reverb] → [Right]
p. 41
p. 41
p. 41
p. 38
MIDI send channel settings
Local Control
6
7
8
9
Transmitting a recorded performance
V-LINK
Press the [ ] button, and press the [-] or [+] button.
[Transpose] + [Split] → [-][+]
p. 23
Dual Balance
1
Hold down the [ ] button and press the [-] or [+] button.
[Metronome/Count In] + [-] [+]
p. 26
p. 26
p. 21
p. 35
p. 20
Metronome volume
1
2
3
4
5
[Song/Tempo] + [-] [+]
[Reverb] + [-] [+]
Beat of metronome
Depth of the Reverb effect
Damper pedal’s resonance level
Dynamic Emphasis setting
[Brilliance] + [-] [+]
[Dynamics] + [-] [+]
p. 18
p. 19
[Grand Space] + [-] [+]
Grand Space setting
6
Hold down the [Split] or [Transpose] button and press the key.
[Split] + key
p. 25
p. 22
Split Point
[Transpose] + key
Key Transpose
47
Download from Www.Somanuals.com. All Manuals Search And Download.
MIDI Implementation Chart
DIGITAL PIANO
Date : Jun. 1, 2004
Version : 1.00
Model HP103
MIDI Implementation Chart
Transmitted
Recognized
Remarks
Function...
Basic
Channel
Default
Changed
1
1
1–16
1–16
Default
Messages
Altered
Mode 3
x
Mode 3
x
Mode
**************
Note
Number :
15–113
**************
0–127
15–113
True Voice
Note ON
Note OFF
O
x
O
x
Velocity
8n v=64
After
Touch
Key’s
Ch’s
x
x
x
x
Pitch Bend
x
x
6, 38
O
x
O
O
O
O
O
O
O
O
Data entry
7
Volume
11
64
x
Expression
Hold 1
Sostenuto
Soft
Effect 1 (Reverb)
RPN LSB, MSB
O
O
O
O
O
66
Control
Change
67
91
100, 101
Prog
Change
O (0...117)
**************
O (0–127)
0...117
: True Number
System Exclusive
O
O
: Song Pos
: Song Sel
: Tune
x
x
x
x
x
x
System
Common
System
Real Time
: Clock
: Commands
x
x
x
x
x
x
x
x
O
x
x
: All sound off
O
:
Reset all controllers
Aux
Message
O
: Local Control
: All Notes OFF
: Active Sense
: Reset
O (123–127)
O
x
Notes
Mode 1 : OMNI ON, POLY
Mode 2 : OMNI ON, MONO
O : Yes
X : No
Mode 3 : OMNI OFF, POLY Mode 4 : OMNI OFF, MONO
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Specifications
Keyboard
Keyboard
88 keys (Progressive Hammer Action Keyboard)
Touch: Light, Medium, Heavy, Fixed
Touch Sensitivity
Keyboard Modes
Sound Generator
Max. Polyphony
Tones
Whole, Dual (volume balance adjustable), Split (split point adjustable)
64 voices
5 groups 20 variations
Temperament
Stretched Tuning
Master Tuning
Transpose
7 types, selectable tonic
2 types
415.3 Hz–466.2 Hz (adjustable in increments of 0.1 Hz)
Key Transpose (-6–+5 in semitones)
Grand Space, Dynamic Emphasis, Reverb (8 levels), Chorus (for E. Piano only),
Damper Resonance (for Piano only, 8 levels)
Effects
Metronome
Beat
2/2, 0/4, 2/4, 3/4, 4/4, 5/4, 6/4, 7/4, 3/8, 6/8, 9/8, 12/8
9 levels
Volume
Recorder
Tracks
2 tracks
Song
1 song
Note Storage
Tempo
Approx. 5,000 notes
Quarter note = 20–250
96 ticks per quarter note
Play/Stop, Rec, Tempo, All Song Play, Track Select
66 songs + 9 Tone Demo Songs
Resolution
Control
Preset Songs
Others
Rated Power Output
Speakers
25 W x 2
12 cm x 2
Beat LED
Display
7-segment, 3-digit LED
Headphones indicator
Control
Volume, Brilliance (3 steps)
Pedals
Damper, Soft, Sostenuto
Other Functions
Connectors
Power Supply
Power Consumption
Panel Lock, Tone Lock
Output jacks (L/Mono, R), Input jacks (L/Mono, R), Headphones jack x 2 (Stereo), MIDI connectors (In, Out)
AC 117 V/AC 230 V/AC 240 V
55 W
1,388 (W) x 425 (D) x 836 (H) mm / 54-11/16 (W) x 16-3/4 (D) x 32-15/16 (H) inches (HP103-MH)
1,398 (W) x 427 (D) x 837 (H) mm / 55-1/16 (W) x 16-13/16 (D) x 33 (H) inches (HP103-PE)
Dimensions
1,388 (W) x 425 (D) x 1,025 (H) mm / 54-11/16 (W) x 16-3/4 (D) x 40-3/8 (H) inches
(including music rest: HP103-MH)
(including piano stand)
1,398 (W) x 427 (D) x 1,027 (H) mm / 55-1/16 (W) x 16-13/16 (D) x 40-7/16 (H) inches
(including music rest: HP103-PE)
Weights
53 kg / 117 lbs (HP103-MH/PE)
(including piano stand)
Accessories
Owner’s manual, Roland 60 Classical Piano Masterpieces, Power Cord, Headphones Hook, Music Rest
*
In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
A
AC inlet ........................................................................... 10
Adjuster .......................................................................... 12
Play
B
All Songs Continuously .......................................... 13
C
D
Resonance ................................................................. 35
Damper Resonance ................................................. 12, 35
Demo
R
Record ............................................................................. 30
Tone Demo ............................................................... 14
Dual Balance .................................................................. 23
E
S
Erase ................................................................................ 34
F
MIDI-related Settings .............................................. 40
G
Tone button .................................................................... 16
Tone Group .................................................................... 16
Transpose ........................................................................ 22
Twin Piano Mode .......................................................... 27
Grand Space ............................................................. 18–19
H
Headphone Hook .......................................................... 11
Headphones ................................................................... 11
I
Internal Song .................................................................. 13
K
L
M
[Volume] knob ............................................................... 12
Master Tuning ............................................................... 36
Metronome ..................................................................... 25
Volume ...................................................................... 26
MIDI ................................................................................ 40
MIDI channel ................................................................. 41
MIDI Devices ................................................................. 40
Music Holder ................................................................. 11
Music Rest ...................................................................... 10
50
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
51
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
52
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
When you need repair service, call your nearest Roland Service Center or authorized Roland
distributor in your country as shown below.
PHILIPPINES
COSTA RICA
TRINIDAD
NORWAY
JORDAN
AFRICA
G.A. Yupangco & Co. Inc.
339 Gil J. Puyat Avenue
Makati, Metro Manila 1200,
PHILIPPINES
JUAN Bansbach Instrumentos
Musicales
AMR Ltd
Roland Scandinavia Avd.
AMMAN Trading Agency
245 Prince Mohammad St.,
Amman 1118, JORDAN
TEL: (06) 464-1200
Ground Floor
Kontor Norge
EGYPT
Al Fanny Trading Office
9, EBN Hagar A1 Askalany
Street,
ARD E1 Golf, Heliopolis,
Cairo 11341, EGYPT
TEL: 20-2-417-1828
Maritime Plaza
Barataria Trinidad W.I.
TEL: (868)638 6385
Ave.1. Calle 11, Apartado 10237,
San Jose, COSTA RICA
TEL: 258-0211
Lilleakerveien 2 Postboks 95
Lilleaker N-0216 Oslo
NORWAY
TEL: (02) 899 9801
KUWAIT
EASA HUSAIN AL-YOUSIFI
& SONS CO.
Abdullah Salem Street,
Safat, KUWAIT
TEL: 2273 0074
SINGAPORE
SWEE LEE MUSIC
COMPANY PTE. LTD.
150 Sims Drive,
SINGAPORE 387381
TEL: 6846-3676
URUGUAY
Todo Musica S.A.
Francisco Acuna de Figueroa
1771
C.P.: 11.800
Montevideo, URUGUAY
TEL: (02) 924-2335
CURACAO
Zeelandia Music Center Inc.
Orionweg 30
Curacao, Netherland Antilles
TEL:(305)5926866
POLAND
MX MUSIC SP.Z.O.O.
UL. Gibraltarska 4.
PL-03664 Warszawa POLAND
TEL: (022) 679 44 19
REUNION
TEL: 243-6399
Maison FO - YAM Marcel
25 Rue Jules Hermann,
Chaudron - BP79 97 491
Ste Clotilde Cedex,
LEBANON
Chahine S.A.L.
Gerge Zeidan St., Chahine
Bldg., Achrafieh, P.O.Box: 16-
5857
Beirut, LEBANON
TEL: (01) 20-1441
DOMINICAN REPUBLIC
Instrumentos Fernando Giraldez
Calle Proyecto Central No.3
Ens.La Esperilla
Santo Domingo,
Dominican Republic
TEL:(809) 683 0305
PORTUGAL
Roland Iberia, S.L.
Portugal Office
Cais das Pedras, 8/9-1 Dto
4050-465, Porto, PORTUGAL
TEL: 22 608 00 60
CRISTOFORI MUSIC PTE LTD
Blk 3014, Bedok Industrial Park E,
#02-2148, SINGAPORE 489980
TEL: 6243-9555
VENEZUELA
Instrumentos Musicales
Allegro,C.A.
Av.las industrias edf.Guitar
REUNION ISLAND
TEL: (0262) 218-429
SOUTH AFRICA
That Other Music Shop(PTY)Ltd.
11 Melle St., Braamfontein,
Johannesbourg,
SOUTH AFRICA
TEL: (011) 403 4105
TAIWAN
ROLAND TAIWAN
ENTERPRISE CO., LTD.
Room 5, 9fl. No. 112 Chung
Shan N.Road Sec.2, Taipei,
TAIWAN, R.O.C.
import
#7 zona Industrial de Turumo
Caracas, Venezuela
TEL: (212) 244-1122
ROMANIA
FBS LINES
Piata Libertatii 1,
535500 Gheorgheni,
ROMANIA
OMAN
ECUADOR
Mas Musika
Rumichaca 822 y Zaruma
Guayaquil - Ecuador
TALENTZ CENTRE L.L.C.
P.O. BOX 37, MUSCAT,
POSTAL CODE 113
TEL: 931-3705
FAX: (011) 403 1234
EUROPE
TEL:(593-4)2302364
TEL: (02) 2561 3339
TEL: (266) 364 609
Paul Bothner(PTY)Ltd.
17 Werdmuller Centre,
Main Road, Claremont 7708
SOUTH AFRICA
QATAR
Al Emadi Co. (Badie Studio &
Stores)
P.O. Box 62, Doha, QATAR
TEL: 4423-554
EL SALVADOR
OMNI MUSIC
75 Avenida Norte y Final
Alameda Juan Pablo II,
Edificio No.4010 San Salvador,
EL SALVADOR
THAILAND
AUSTRIA
Roland Elektronische
Musikinstrumente HmbH.
RUSSIA
MuTek
3-Bogatyrskaya Str. 1.k.l
107 564 Moscow, RUSSIA
TEL: (095) 169 5043
Theera Music Co. , Ltd.
330 Verng NakornKasem, Soi 2,
Bangkok 10100, THAILAND
TEL: (02) 2248821
TEL: (021) 674 4030
Austrian Office
Eduard-Bodem-Gasse 8,
A-6020 Innsbruck, AUSTRIA
TEL: (0512) 26 44 260
SAUDI ARABIA
aDawliah Universal
Electronics APL
Corniche Road, Aldossary
Bldg., 1st Floor, Alkhobar,
SAUDI ARABIA
VIETNAM
Saigon Music
Suite DP-8
40 Ba Huyen Thanh Quan Street
Hochiminh City, VIETNAM
TEL: (08) 930-1969
TEL: 262-0788
SPAIN
ASIA
Roland Iberia, S.L.
Paseo García Faria, 33-35
08005 Barcelona SPAIN
TEL: 93 493 91 00
GUATEMALA
BELGIUM/FRANCE/
HOLLAND/
LUXEMBOURG
Roland Central Europe N.V.
Houtstraat 3, B-2260, Oevel
(Westerlo) BELGIUM
CHINA
Roland Shanghai Electronics
Co.,Ltd.
5F. No.1500 Pingliang Road
Shanghai 200090, CHINA
TEL: (021) 5580-0800
Casa Instrumental
Calzada Roosevelt 34-01,zona 11
Ciudad de Guatemala
Guatemala
SWEDEN
P.O.Box 2154, Alkhobar 31952
SAUDI ARABIA
TEL: (03) 898 2081
TEL:(502) 599-2888
Roland Scandinavia A/S
SWEDISH SALES OFFICE
Danvik Center 28, 2 tr.
S-131 30 Nacka SWEDEN
TEL: (0)8 702 00 20
HONDURAS
Almacen Pajaro Azul S.A. de C.V.
BO.Paz Barahona
3 Ave.11 Calle S.O
San Pedro Sula, Honduras
TEL: (504) 553-2029
AUSTRALIA/
NEW ZEALAND
TEL: (014) 575811
Roland Shanghai Electronics
Co.,Ltd.
(BEIJING OFFICE)
10F. No.18 3 Section Anhuaxili
Chaoyang District Beijing
100011 CHINA
SYRIA
Technical Light & Sound
Center
Rawda, Abdul Qader Jazairi St.
Bldg. No. 21, P.O.BOX 13520,
Damascus, SYRIA
CZECH REP.
K-AUDIO
Kardasovska 626.
CZ-198 00 Praha 9,
CZECH REP.
AUSTRALIA/
SWITZERLAND
Roland (Switzerland) AG
Landstrasse 5, Postfach,
CH-4452 Itingen,
SWITZERLAND
TEL: (061) 927-8383
NEW ZEALAND
Roland Corporation
Australia Pty.,Ltd.
38 Campbell Avenue
Dee Why West. NSW 2099
AUSTRALIA
MARTINIQUE
Musique & Son
Z.I.Les Mangle
97232 Le Lamantin
Martinique F.W.I.
TEL: 596 596 426860
TEL: (2) 666 10529
TEL: (010) 6426-5050
TEL: (011) 223-5384
DENMARK
Roland Shanghai Electronics
Co.,Ltd.
(GUANGZHOU OFFICE)
2/F., No.30 Si You Nan Er Jie
Yi Xiang, Wu Yang Xin Cheng,
Guangzhou 510600, CHINA
TEL: (020) 8736-0428
TURKEY
Ant Muzik Aletleri Ithalat Ve
Ihracat Ltd Sti
Siraselviler Caddesi
Siraselviler Pasaji No:74/20
Taksim - Istanbul, TURKEY
TEL: (0212) 2449624
Roland Scandinavia A/S
Nordhavnsvej 7, Postbox 880,
DK-2100 Copenhagen
DENMARK
UKRAINE
TIC-TAC
Mira Str. 19/108
P.O. Box 180
295400 Munkachevo,
UKRAINE
TEL: (03131) 414-40
For Australia
Tel: (02) 9982 8266
For New Zealand
Tel: (09) 3098 715
Gigamusic SARL
10 Rte De La Folie
97200 Fort De France
Martinique F.W.I.
TEL: 596 596 715222
TEL: 3916 6200
FINLAND
Roland Scandinavia As, Filial
Finland
Elannontie 5
FIN-01510 Vantaa, FINLAND
TEL: (0)9 68 24 020
HONG KONG
Tom Lee Music Co., Ltd.
Service Division
22-32 Pun Shan Street, Tsuen
Wan, New Territories,
HONG KONG
U.A.E.
Zak Electronics & Musical
Instruments Co. L.L.C.
Zabeel Road, Al Sherooq Bldg.,
No. 14, Grand Floor, Dubai,
U.A.E.
CENTRAL/LATIN
AMERICA
UNITED KINGDOM
MEXICO
Roland (U.K.) Ltd.
Atlantic Close, Swansea
Enterprise Park, SWANSEA
SA7 9FJ,
Casa Veerkamp, s.a. de c.v.
Av. Toluca No. 323, Col. Olivar
de los Padres 01780 Mexico
D.F. MEXICO
ARGENTINA
Instrumentos Musicales S.A.
Av.Santa Fe 2055
(1123) Buenos Aires
ARGENTINA
TEL: (011) 4508-2700
GERMANY
Roland Elektronische
Musikinstrumente HmbH.
Oststrasse 96, 22844
Norderstedt, GERMANY
TEL: (040) 52 60090
TEL: 2415 0911
TEL: (04) 3360715
UNITED KINGDOM
TEL: (01792) 702701
TEL: (55) 5668-6699
Parsons Music Ltd.
NICARAGUA
Bansbach Instrumentos
Musicales Nicaragua
Altamira D'Este Calle Principal
de la Farmacia 5ta.Avenida
1 Cuadra al Lago.#503
Managua, Nicaragua
8th Floor, Railway Plaza, 39
Chatham Road South, T.S.T,
Kowloon, HONG KONG
TEL: 2333 1863
NORTH AMERICA
MIDDLE EAST
BARBADOS
GREECE
STOLLAS S.A.
Music Sound Light
155, New National Road
Patras 26442, GREECE
TEL: 2610 435400
CANADA
Roland Canada Music Ltd.
(Head Office)
5480 Parkwood Way
Richmond B. C., V6V 2M4
CANADA
A&B Music Supplies LTD
12 Webster Industrial Park
Wildey, St.Michael, Barbados
TEL: (246)430-1100
INDIA
Rivera Digitec (India) Pvt. Ltd.
409, Nirman Kendra
Mahalaxmi Flats Compound
Off. Dr. Edwin Moses Road,
Mumbai-400011, INDIA
TEL: (022) 2493 9051
BAHRAIN
Moon Stores
No.16, Bab Al Bahrain Avenue,
P.O.Box 247, Manama 304,
State of BAHRAIN
TEL: (505)277-2557
BRAZIL
Roland Brasil Ltda.
Rua San Jose, 780 Sala B
Parque Industrial San Jose
Cotia - Sao Paulo - SP, BRAZIL
TEL: (011) 4615 5666
PANAMA
TEL: (604) 270 6626
SUPRO MUNDIAL, S.A.
Boulevard Andrews, Albrook,
Panama City, REP. DE
PANAMA
TEL: 17 211 005
HUNGARY
Roland East Europe Ltd.
Warehouse Area ‘DEPO’ Pf.83
H-2046 Torokbalint,
HUNGARY
CYPRUS
Radex Sound Equipment Ltd.
17, Diagorou Street, Nicosia,
CYPRUS
Roland Canada Music Ltd.
(Toronto Office)
170 Admiral Boulevard
Mississauga On L5T 2N6
CANADA
INDONESIA
PT Citra IntiRama
J1. Cideng Timur No. 15J-150
Jakarta Pusat
INDONESIA
TEL: (021) 6324170
TEL: 315-0101
TEL: (23) 511011
CHILE
Comercial Fancy II S.A.
Rut.: 96.919.420-1
Nataniel Cox #739, 4th Floor
Santiago - Centro, CHILE
TEL: (02) 688-9540
PARAGUAY
Distribuidora De
Instrumentos Musicales
J.E. Olear y ESQ. Manduvira
Asuncion PARAGUAY
TEL: (595) 21 492147
TEL: (022) 66-9426
TEL: (905) 362 9707
IRELAND
Roland Ireland
G2 Calmount Park, Calmount
Avenue, Dublin 12
Republic of IRELAND
TEL: (01) 4294444
IRAN
MOCO INC.
No.41 Nike St., Dr.Shariyati Ave.,
Roberoye Cerahe Mirdamad
Tehran, IRAN
U. S. A.
KOREA
Roland Corporation U.S.
5100 S. Eastern Avenue
Los Angeles, CA 90040-2938,
U. S. A.
Cosmos Corporation
1461-9, Seocho-Dong,
Seocho Ku, Seoul, KOREA
TEL: (02) 3486-8855
COLOMBIA
Centro Musical Ltda.
Cra 43 B No 25 A 41 Bododega 9
Medellin, Colombia
PERU
Audionet
Distribuciones Musicales SAC
Juan Fanning 530
Miraflores
TEL: (021) 285-4169
TEL: (323) 890 3700
ITALY
Roland Italy S. p. A.
Viale delle Industrie 8,
20020 Arese, Milano, ITALY
TEL: (02) 937-78300
ISRAEL
Halilit P. Greenspoon & Sons
Ltd.
8 Retzif Ha'aliya Hashnya St.
Tel-Aviv-Yafo ISRAEL
TEL: (03) 6823666
MALAYSIA
Roland Asia Pacific Sdn. Bhd.
45-1, Block C2, Jalan PJU 1/39,
Dataran Prima, 47301 Petaling
Jaya, Selangor, MALAYSIA
TEL: (03) 7805-3263
TEL: (574)3812529
Lima - Peru
TEL: (511) 4461388
As of January 15, 2005 (ROLAND)
Download from Www.Somanuals.com. All Manuals Search And Download.
For EU Countries
This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC.
For the USA
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–
–
–
–
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Unauthorized changes or modification to this system can void the users authority to operate this equipment.
This equipment requires shielded interface cables in order to meet FCC class B Limit.
For Canada
NOTICE
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
AVIS
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Download from Www.Somanuals.com. All Manuals Search And Download.
This owner’s manual is printed on recycled paper.
03679534
’05-4-3N
Download from Www.Somanuals.com. All Manuals Search And Download.
|