* The illustration shows the TD-15.
How to obtain a PDF of the owner’s manual
PDF files of the owner’s manual and supplementary material for this product can be obtained from the
Roland website.
• TD-15/TD-11 Owner’s Manual (this document)
• Data List
(This is not included with the product; you may download it as necessary.)
Visit the following URL, choose“Owner’s Manuals,”and search for the model name“TD-15”or“TD-11.”
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE UNIT SAFELY
CAUTION
WARNING
CAUTION
Turn off the unit if an abnormality or malfunction
occurs
Do not connect or disconnect the AC adaptor with
wet hands
Place in a well ventilated location
The unit and the AC adaptor should
be located so their location or
position does not interfere with
their proper ventilation.
Immediately turn the unit off,
remove the AC adaptor from the
outlet, and request servicing by
your retailer, the nearest Roland
Service Center, or an authorized
Roland distributor, as listed on the
“Information”page when:
Never handle the AC adaptor or
its plugs with wet hands when
plugging into, or unplugging from,
an outlet or this unit.
Use only the specified stand (s)
Disconnect everything before moving the unit
Before moving the unit, disconnect
the AC adaptor and all cords
This unit is designed to be used in
combination with specific stands
(MDS series) manufactured by
Roland. If used in combination with
other stands, you risk sustaining
injuries as the result of this product
dropping down or toppling over
due to a lack of stability.
• The AC adaptor, the power-
supply cord, or the plug has been
damaged; or
coming from external devices.
Unplug the AC adaptor from the outlet before
cleaning
Before cleaning the unit, turn it off
and unplug the AC adaptor from
the outlet (p. 10).
• If smoke or unusual odor occurs; or
• Objects have fallen into, or liquid
has been spilled onto the unit; or
• The unit has been exposed to rain
(or otherwise has become wet); or
• The unit does not appear to
operate normally or exhibits a
marked change in performance.
Evaluate safety issues before using stands
Even if you observe the cautions
given in the owner’s manual,
certain types of handling may allow
this product to fall from the stand,
or cause the stand to overturn.
Please be mindful of any safety
issues before using this product.
If there is a possibility of lightning strike,
disconnect the AC adaptor from the outlet
Whenever you suspect the
possibility of lightning in your area,
disconnect the AC adaptor from
the outlet.
Adults must provide supervision in places where
children are present
When using the unit in locations
where children are present, be
careful so no mishandling of the
unit can take place. An adult should
always be on hand to provide
supervision and guidance.
Grasp the plug when connecting or disconnecting
the AC adaptor
Always grasp only the plug on the
AC adaptor cord when plugging
into, or unplugging from, an outlet
or this unit.
Keep small items out of the reach of children
To prevent accidental ingestion
of the parts listed below, always
keep them out of the reach of small
children.
Do not drop or subject to strong impact
Protect the unit from strong impact.
(Do not drop it!)
• Included Parts
Wing bolts (p. 9)
• Removable Parts
Cap of the special connection
cable
Periodically clean the AC adaptor’s plug
At regular intervals, you should
unplug the AC adaptor and clean
it by using a dry cloth to wipe all
dust and other accumulations away
from its prongs. Also, disconnect
the power plug from the power
outlet whenever the unit is to
remain unused for an extended
period of time. Any accumulation of
dust between the power plug and
the power outlet can result in poor
insulation and lead to fire.
Do not share an outlet with an unreasonable
number of other devices
Do not force the unit’s power-
supply cord to share an outlet with
an unreasonable number of other
devices. Be especially careful when
using extension cords—the total
power used by all devices you have
connected to the extension cord’s
outlet must never exceed the power
rating (watts/amperes) for the
extension cord. Excessive loads can
cause the insulation on the cord to
heat up and eventually melt through.
Manage cables for safety
Try to prevent cords and cables
from becoming entangled. Also, all
cords and cables should be placed
so they are out of the reach of
children.
Do not use overseas
Before using the unit in a foreign
country, consult with your retailer,
the nearest Roland Service Center,
or an authorized Roland distributor,
as listed on the“Information”page.
Avoid climbing on top of the unit, or placing
heavy objects on it
Never climb on top of, nor place
heavy objects on the unit.
Do not use a CD-ROM in an audio CD player or
DVD player
DO NOT play a CD-ROM disc on a
conventional audio CD player. The
resulting sound may be of a level
that could cause permanent hearing
loss. Damage to speakers or other
system components may result.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT NOTES
•
USB flash drives are constructed using precision
components; handle the USB flash drives carefully,
paying particular note to the following.
Power Supply
Additional Precautions
•
Do not connect this unit to same electrical outlet
that is being used by an electrical appliance that
is controlled by an inverter or a motor (such as a
refrigerator, washing machine, microwave oven, or
air conditioner). Depending on the way in which
the electrical appliance is used, power supply noise
may cause this unit to malfunction or may produce
audible noise. If it is not practical to use a separate
electrical outlet, connect a power supply noise
filter between this unit and the electrical outlet.
•
Please be aware that the contents of memory can
be irretrievably lost as a result of a malfunction,
or the improper operation of the unit. To protect
yourself against the risk of loosing important
data, we recommend that you periodically save a
backup copy of important data you have stored in
the unit’s memory to USB flash drives.
•
To prevent damage to the cards from static
electricity, be sure to discharge any static
electricity from your own body before handling
the cards.
•
•
•
Do not touch or allow metal to come into
contact with the contact portion of the cards.
•
•
Unfortunately, it may be impossible to restore
the contents of data that was stored in the unit’s
memory or on USB flash drives once it has been
lost. Roland Corporation assumes no liability
concerning such loss of data.
Do not bend, drop, or subject cards to strong
shock or vibration.
•
•
•
The AC adaptor will begin to generate heat after
long hours of consecutive use. This is normal, and
is not a cause for concern.
Do not keep cards in direct sunlight, in closed
vehicles, or other such locations.
Use a reasonable amount of care when using the
unit’s buttons, sliders, or other controls; and when
using its jacks and connectors. Rough handling can
lead to malfunctions.
•
•
Do not allow cards to become wet.
To prevent malfunction and equipment failure,
always make sure to turn off the power on all your
equipment before you make any connections.
Do not disassemble or modify the cards.
Handling CDs / DVDs
•
With the factory settings, this unit will
•
•
Never strike or apply strong pressure to the display.
Avoid touching or scratching the shiny underside
(encoded surface) of the disc. Damaged or dirty
CD discs may not be read properly. Keep your discs
clean using a commercially available CD cleaner.
automatically be switched off 30 minutes after
you stop playing or operating the unit. If you don’t
want the unit to turn off automatically, change the
When disconnecting all cables, grasp the
connector itself—never pull on the cable. This way
you will avoid causing shorts, or damage to the
cable’s internal elements.
About Copyright
Placement
•
•
To avoid disturbing others nearby, try to keep the
unit’s volume at reasonable levels. You may prefer
to use headphones, so you do not need to be
concerned about those around you.
•
Using the unit near power amplifiers (or other
equipment containing large power transformers)
may induce hum. To alleviate the problem, change
the orientation of this unit; or move it farther away
from the source of interference.
•
It is forbidden by law to make an audio recording,
video recording, copy or revision of a third party’s
copyrighted work (musical work, video work,
broadcast, live performance, or other work),
whether in whole or in part, and distribute,
sell, lease, perform, or broadcast it without the
permission of the copyright owner.
Since sound vibrations can be transmitted through
floors and walls to a greater degree than expected,
take care not to allow such sound to become a
nuisance to others nearby. Although the drum
pads and pedals are designed so there is a minimal
amount of extraneous sound produced when
they’re struck, rubber heads tend to produce
louder sounds compared to mesh heads. You can
effectively reduce much of the unwanted sound
from the pads by switching to mesh heads.
•
•
This device may interfere with radio and television
reception. Do not use this device in the vicinity of
such receivers.
•
•
Do not use this product for purposes that could
infringe on a copyright held by a third party. We
assume no responsibility whatsoever with regard
to any infringements of third-party copyrights
arising through your use of this product.
Noise may be produced if wireless communications
devices, such as cell phones, are operated in the
vicinity of this unit. Such noise could occur when
receiving or initiating a call, or while conversing.
Should you experience such problems, you should
relocate such wireless devices so they are at a
greater distance from this unit, or switch them off.
The copyright of content in this product (the
sound waveform data, style data, accompaniment
patterns, phrase data, audio loops and image data)
is reserved by Roland Corporation and/or Atelier
Vision Corporation.
•
•
When you need to transport the unit, package
it in the box (including padding) that it came
in, if possible. Otherwise, you will need to use
equivalent packaging materials.
•
•
Do not expose the unit to direct sunlight, place
it near devices that radiate heat, leave it inside
an enclosed vehicle, or otherwise subject it to
temperature extremes. Excessive heat can deform
or discolor the unit.
Some connection cables contain resistors. Do not
use cables that incorporate resistors for connecting
to this unit. The use of such cables can cause the
sound level to be extremely low, or impossible to
hear. For information on cable specifications, contact
the manufacturer of the cable.
•
•
Purchasers of this product are permitted to
utilize said content for the creating, performing,
recording and distributing original musical works.
Purchasers of this product are NOT permitted to
extract said content in original or modified form,
for the purpose of distributing recorded medium
of said content or making them available on a
computer network.
When moved from one location to another where
the temperature and/or humidity is very different,
water droplets (condensation) may form inside
the unit. Damage or malfunction may result if you
attempt to use the unit in this condition. Therefore,
before using the unit, you must allow it to stand
for several hours, until the condensation has
completely evaporated.
•
The explanations in this manual include
illustrations that depict what should typically be
shown by the display.
Note, however, that your unit may incorporate
a newer, enhanced version of the system (e.g.,
includes newer sounds), so what you actually see
in the display may not always match what appears
in the manual.
•
Do not put anything that contains water on this
unit. Also, avoid the use of insecticides, perfumes,
alcohol, nail polish, spray cans, etc., near the unit.
Swiftly wipe away any liquid that spills on the unit
using a dry, soft cloth.
•
•
MMP (Moore Microprocessor Portfolio) refers to a
patent portfolio concerned with microprocessor
architecture, which was developed by Technology
Properties Limited (TPL). Roland has licensed this
technology from the TPL Group.
Before Using External Memories
•
Carefully insert the USB flash drives all the way
in—until it is firmly in place.
Maintenance
•
For everyday cleaning wipe the unit with a soft,
dry cloth or one that has been slightly dampened
with water. To remove stubborn dirt, use a cloth
impregnated with a mild, non-abrasive detergent.
Afterwards, be sure to wipe the unit thoroughly
with a soft, dry cloth.
Top panel
MPEG Layer-3 audio compression technology
is licensed from Fraunhofer IIS Corporation and
THOMSON Multimedia Corporation.
•
•
ASIO is a trademark of Steinberg Media
Technologies GmbH.
•
Never use benzine, thinners, alcohol or solvents of
any kind, to avoid the possibility of discoloration
and/or deformation.
Roland, SuperNATURAL, and V-Drums are either
registered trademarks or trademarks of Roland
Corporation in the United States and/or other
countries.
Repairs and Data
•
Company names and product names appearing
in this document are registered trademarks or
trademarks of their respective owners.
•
Never touch the terminals of the USB flash drives.
Also, avoid getting the terminals dirty.
•
Please be aware that all data contained in the
unit’s memory may be lost when the unit is sent for
repairs. Important data should always be backed
up to USB flash drives, or written down on paper
(when possible). During repairs, due care is taken
to avoid the loss of data. However, in certain cases
(such as when circuitry related to memory itself is
out of order), we regret that it may not be possible
to restore the data, and Roland assumes no liability
concerning such loss of data.
Copyright © 2012 ROLAND CORPORATION
All rights reserved. No part of this publication may
be reproduced in any form without the written
permission of ROLAND CORPORATION.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Features
SuperNATURAL on V-Drums
Roland takes digital drums to a new height with the implementation of its exclusive SuperNATURAL concept. The best
electronic drums in the world just got better.
Improved dynamics and sensitivity make every nuance of playing drums feel even more natural, no matter what your
musical style might be.
What are SuperNATURAL Tones?
Taking advantage of Behavior Modeling Technology, SuperNATURAL is Roland’s exclusive
sound set that achieves a new level of realism and expression that were difficult to realize with
previous sound generators.
Behavior Modeling Technology
Not only physical modeling of the instruments, Roland takes it a step further by modeling the instrument’s distinctive
behavior that responds to how the performer plays, resulting in true-to-life, expressive sounds in realtime.
Enjoy playing with the Internal songs & Song player
Realistic and powerful backing songs and loop phrases are built into the TD.
These are perfect for practicing, or just the pure enjoyment of playing along.
Song player (p. 27)
You can play back audio files (WAV, MP3) directly from an inserted USB flash drive(optional). Also the
Speed Control and A-B repeat functions allow you to take practicing with your favorite songs to a
new level.
Advanced practice support
Roland’s highly acclaimed Coach Mode provides a full set of exercises for self improvement. These
include“Time Check,”“Quiet Count,”and“Warm Ups.”
QUICK REC function (p. 14)
The QUICK REC function is another practice tool that allows you to record and playback your
performance easily.
Using with your computer
USB audio and USB MIDI support (p. 47)
By connecting the TD to your computer with a single USB cable, you can transmit audio and MIDI
data.
Perfect for using with the V-Drums Tutor, V-Drums Friend Jam and/or your own DAW software.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Panel Descriptions
Front Panel
[F1]–[F3] buttons
(function buttons)
Execute the functions shown in
the bottom of the display.
Display
[POWER] button
Turns the power on/off (p. 10).
This shows the drum kit name
and other information during
performance. During editing, it
shows the settings as graphics and
text.
* The TD will automatically power-off
approximately 30 minutes (with
the factory settings) after it was last
played or operated.
If you don’t want the power to turn
off automatically, turn the“Auto Off”
In this manual, we’ll refer to these
(from the left) as the [F1], [F2], and
[F3] buttons.
Cursor buttons (
Move the cursor in the screen.
/
)
[VOLUME] knob
Adjusts the volume that’s output
from the OUTPUT jacks (p. 10).
[EXIT] button
Each time you press this button,
you’ll return to the next-highest
level of the screen. If you press it
several times, you will eventually
return to the DRUM KIT screen.
Value dial
[
] (METRONOME) button
Use this to select drum kits or to
edit values.
Sounds the metronome (p. 13).
[
] (QUICK REC) button
Use this when you want to record
[SONG] button
[
] button
Accesses the SONG screen (p.
27). Press this when you want to
play songs or make song-related
settings.
Plays/stops the song or your
performance recorded by QUICK
[DRUM KIT] buttons
Switch drum kits (p. 11).
* The illustration shows the TD-15.
How to read this manual
•This owner’s manual applies to both the TD-15 and the TD-11. These two devices will be collectively referred to as the“TD.”
•Functions found only on the TD-15 are indicated by the
icon.
•Buttons on the panel are enclosed by square brackets [ ]; for example, the [SETUP] button.
•Buttons corresponding to function buttons shown in the display are referred to as (for example) the [F3] (XSTICK) button.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Panel Descriptions
Side Panel (Connecting Your Equipment)
DC IN jack
Connect the included AC adapter here.
OUTPUT jacks
(L/MONO, R)
For connecting to your audio system or
amp. All sounds from the TD are output
here.
MIDI OUT connector
Use this when you want
to trigger an external MIDI
sound module, sampler,
etc., from the TD (p. 37).
Place the AC adaptor
so the side with the
indicator (see illustra-
tion) faces upwards
and the side with
textual information
faces downwards.
The indicator will light
when you plug the
AC adaptor into an AC
outlet.
For outputting sounds in MONO, connect
the cable to the L/MONO jack.
[VOLUME] knob
Adjusts the volume of the
headphones.
PHONES jack
TRIGGER IN jacks
(CRASH2, AUX
These allow you to connect
additional pads.
)
Connect stereo
yo
headphones here.
Sound will still be output
from the OUTPUT jacks
even if headphones are
connected.
dio player or o
dio source via
ini-plug, you ca
aying the drum
th your favorite
l be determined b
connected device.
NOTE
• To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any
connections.
• When connection cables with resistors are used, the volume level of equipment connected to the MIX IN jack may be low. If
this happens, use connection cables that do not contain resistors.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Panel Descriptions
Top Panel (Connecting Your Equipment)
COMPUTER port
MEMORY port
Use a USB cable to connect the TD
and audio data can be sent via USB
to and from your DAW software.
You can connect your USB flash drive
(separately sold) here, and play back
settings on it (p. 38).
NOTE
• Use USB flash drive sold by Roland. We
cannot guarantee operation if other products
are used.
• Never insert or remove a USB flash drive while
this unit is turned on. Doing so may corrupt
the unit’s data or the data on the USB flash
drive.
• Carefully insert the USB flash drive all the way
in-until it is firmly in place.
Bottom Panel
Sound module mounting plate attachment
holes
Attach the included sound module mounting plate
here to attach the TD to your drum stand.
TRIGGER INPUT
connector
Connect the included
dedicated cable to this
connector, and use it to
connect the pads and
pedals.
Use the included wing bolts to attach the plate as
shown in the illustration.
* Use only the included wing bolts. Using any other
bolts will cause malfunctions.
* The TD must be attached to the sound module
mounting plate when in use.
To prevent the inadvertent disruption of power
to your unit (should the plug be pulled out
accidentally), and to avoid applying undue stress
to the DC IN jack, anchor the power cord using the
cord hook, as shown in the illustration.
NOTE
When turning the unit upside down, be sure to handle the unit with care so as to prevent damage to the buttons, knobs,
etc.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Ready to Play
Turning the power off
Turning the Power On/Off
NOTE
Settings you’ve edited on the TD itself will be saved
when you turn off the power. Be sure to turn off the
power by pressing the [POWER] button.
Turning the power on
941
to follow the procedure below to turn on their power.
If you turn on equipment in the wrong order, you risk
causing malfunction or equipment failure.
1. Minimize the volume of the TD and of the
external equipment connected to the TD
943
* Before turning the unit on/off, always be sure to turn
2. Power-off the external equipment
the volume down. Even with the volume turned
down, you might hear some sound when switching
the unit on/off. However, this is normal and does not
indicate a malfunction.
3. Hold down the [POWER] button until the screen
indicates “See you!”
1. Turn the [VOLUME] knob all the way to the left to
minimize the volume
If you’re using headphones, you should also minimize
the [VOLUME] knob located on the side panel.
2. Minimize the volume of the connected amp or
audio system
3. Press the [POWER] button
942
* This unit is equipped with a protection circuit. A brief
interval (a few seconds) after turning the unit on is
required before it will operate normally.
4. Power-on the amp or audio system that’s
connected to the TD
5. While striking the pads to hear the sound, adjust
the volume by gradually turning the [VOLUME]
knob toward the right
Also adjust the volume appropriately on the connected
amp or audio system.
If you’re using headphones, you should also minimize
the [VOLUME] knob located on the side panel.
If you don’t want the power to turn off automatically, change the “Auto Off” setting to “OFF.”
309
The TD will automatically power-off approximately 30 minutes (with the factory settings) after it was last played or
operated.
If you don’t want the power to turn off automatically, turn the“Auto Off”setting“OFF”as described on p. 35.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the Drums
Drum Kits and Instruments
Selecting a Drum Kit
1. Use the [DRUM KIT] buttons to select a drum kit
On the TD, the sound you hear when you strike each pad
is called an“instrument.”A“drum kit”is a set of sounds
(instruments) assigned to the pads.
Drum kit
Instrument
The DRUM KIT screen will appear.
No matter what screen is in use, by pressing the [DRUM
KIT] button, you will return to the DRUM KIT screen.
The illustration below shows the structure of a drum kit.
Selecting a drum kit from the list
Drum kit 100 (50 on the TD-11)
In the DRUM KIT screen, you can turn the value dial to
access the KIT LIST and select a drum kit from the list.
Drum kit 1
Pad settings
About the DRUM KIT screen
KICK
SNARE
Head
Rim
TOM1
Head
Rim
TOM2
Head
Rim
This is the TD’s main screen; it will appear when you press
a [DRUM KIT] button.
Head
Drum kit number
Strength of the pad strike
TOM3
Head
Rim
HI-HAT
Bow
CRASH1
Bow
CRASH2
Bow
Edge
Edge
Edge
RIDE
Bow
Edge
Bell
AUX
Head
Rim
Instrument settings
Instruments (instrumental sounds),
Tempo (shown only when
the metronome is sounding)
EDIT (tuning, volume, etc.)
Ambience send level
MIDI settings
Ambience settings
The performance location, wall material, amount of
ambience, etc.
Cross-Stick Function
Pressing the [F3] (XSTICK) button enables or disables the
snare pad.
Multi-effect settings
Equalizer settings
Overall settings for the entire drum kit
Volume, drum kit name
What do Head and Rim mean?
Head
Rim
* The [F3] (XSTICK) button is shown only if cross-stick
is enabled.
On the TD, settings for a pad’s
head and rim (for a cymbal, the
bow and edge) can be made
separately.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the Drums
Cymbals (such as CY-13R/CY-8)
Performance Techniques
Pads (such as PDX-100/PDX-8/PDX-6)
Bow shot
The most common method, playing the middle area of
the cymbal.
Head shot
Hit only the head of the pad.
Edge shot
Head
Use the shoulder of the stick to hit the edge sensor of the
cymbal pad (as shown in the figure).
Rim shot
Strike the head and the rim of the pad simultaneously.
A sound (rim sound) different than the head shot will be
heard.
Edge sensor
Bell shot (CY-15R, CY-13R)
Strike the bell area.
Rim
Cross stick
Only strike the rim of the pad.
Depending on the sound assigned to the rim you can
play rim shots and/or cross stick sounds.
* Strike the bell somewhat strongly with the shoulder
of the stick.
Choking a cymbal
Choking (pinching) the cymbal’s edge with the hand
immediately after hitting the cymbal will mute or
choke the sound, just like with a real cymbal. The Choke
function only works when you grasp in the area (where
the edge sensor is) as shown in the figure. If you do
otherwise, it will not work.
Rim
Rim
* This is supported only for the snare pad.
Roland logo
Edge sensor
* To play the cross stick, be sure that you only strike the
rim of the pad. Place your hand on the head gently,
otherwise this may prevent the cross stick function
from working properly.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the Drums
Hi-Hat (CY-5/VH-11)
Using the Metronome
Practicing with the metronome is the best way to
develop accurate timing.
Open/Closed
The hi-hat sound will change smoothly between open
and closed depending on pressure applied to the hi-hat
control pedal or a hi-hat stand.
Starting the Metronome
Foot closed and foot splash sounds are possible.
1. Press the [ ] button
The metronome will start playing, and the button will
blink in time with the tempo.
MEMO
You can change the way in which the metronome
sounds (p. 36).
Bow shot
Hit the striking surface of the hi-hat.
Changing the Metronome Tempo
and Volume
(TEMPO) button
Bow
The METRONOME screen will appear.
Edge shot
Use the shoulder of the stick to hit the edge of the hi-hat
pad.
2. Use the [F1]–[F3] buttons to select the item that
you want to edit, and use the value dial to edit
the setting
Button
Value
Description
Edge
Use the value dial to set the
tempo.
* You can set the tempo by
pressing the [F1] (TEMPO)
button three or more times
in succession at the desired
interval.
[F1]
(TEMPO)
20–260
[F2]
(VOLUME)
Use the value dial to set the
volume.
0–10
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the Drums
NOTE
Whenever you turn on the power, the TD is prepared
for the playback of its demo patterns.
After you’ve made a recording, if you turn off the
power, the data for the recording will be erased. Then,
the next time the power is switched on, the demo
patterns will once again be loaded in from internal
memory.
Recording Your Performance
(QUICK REC)
The TD lets you easily record and play back your own
performance (QUICK REC).
This is a convenient way to repeatedly record
yourself practicing and then play back to check your
performance.
* Before you continue, select the drum kit that you
want to use for practicing (recording).
Where the recorded data is exported
When a USB flash drive is connected,
your recorded data is automatically
exported to the USB flash drive. Only the
five most recent recorded performances
will be exported as SMF data.
MEMO
You can also record your playing along with a song.
For details, refer to p. 30.
MEMO
REC) button
SMF (Standard MIDI File) is a standard file
format that allows performance data to
be exchanged between various musical
applications.
The [ ] (QUICK REC) button will light, and the QUICK REC
screen will appear.
The recorded data is saved in the following folder
of the USB flash drive.
Roland
TD-15 or TD-11
MEMO
If you want to hear the metronome while you record,
press the [ ] button to turn on the metronome.
Backup
Kit
Use the value dial to set the tempo.
QUICK REC
KIT_01 MID
KIT_02 MID
KIT_03 MID
KIT_04 MID
KIT_05 MID
2. To start recording, strike a pad or press the
[
] button
* When recording starts, the previous recording will be
completely erased.
3. Press the [
] button to stop recording
4. Press the [
] button once again
The recorded performance will play back.
You can press the [F2] (REPEAT)
button to make the performance
play back repeatedly.
5. Press the [
14
] button to stop playback
Download from Www.Somanuals.com. All Manuals Search And Download.
QuicklyEditinganInstrument(QUICKEDIT)
The TD-15’s QUICK EDIT function lets you make quick and easy adjustments to the sound of each instrument.
1. Before you continue, select the drum kit that contains the instrument you want to edit
Each time you press the button, you’ll cycle between“Tuning,”“Muffling,”and“Strainer,”and then return to the DRUM KIT
screen.
The pad being edited
3. Strike the pad whose instrument you want to edit
The screen will show the edit screen for the pad you struck.
4. Use the value dial to edit the value
Parameter
Tuning
Value
-240–+240
0–50
Description
Negative (-) settings will lower the pitch, and positive (+) settings will raise the pitch.
Larger values will reduce the resonance and emphasize the attack.
Strainer (snare) tension. Higher values make the tension tighter.
Resonance of the snare. Higher values increase the resonance.
Muffling
Strainer
1–10
Snare Buzz
0–10
* The editable parameters will differ depending on the instrument group.
5. Press the [EXIT] button to return to the DRUM KIT screen
15
Download from Www.Somanuals.com. All Manuals Search And Download.
About the MENU Screens
There are eight menu screens that allow you to edit the drum kit.
In the DRUM KIT screen, press the [MENU] button to access the KIT MENU screen, from which you can jump to each edit screen.
INST
Change instruments, or adjust the overall volume of the drum kit (p. 17).
FX
Apply an effect to the entire drum kit (p. 19).
Menu
Description
Ambience
Ambience settings
Multi-effect settings
EQ settings
Multi-FX
EQ
NAME
Assign a name to the drum kit (p. 22)
MIDI
Change the MIDI note number of each pad (p. 22).
COPY/PASTE
Copy and paste drum kits or pads (p. 23).
SAVE/LOAD
Save a drum kit to your USB flash drive, or load a previously-saved drum kit
from the USB flash drive back into the TD (p. 24).
1 KIT RESTORE
This lets you return the currently selected drum kit to the factory settings
Use the cursor buttons (
to scroll the screen.
/
)
SYSTEM
Here you can edit settings that apply to the entire TD (p. 34).
Menu
Description
Page
Settings for display contrast and power
(Auto Off)
Options
Metronome
Metronome settings
Settings for the pads connected to the
TRIGGER IN AUX jacks
Pad Control
MIDI
MIDI-related settings
Use a USB flash drive
USB Memory
Refer to the separate document“About the
Wireless LAN Function.”
Wireless
—
Pad Settings
Information
Factory Reset
Pad settings
View information about the TD itself
Restore the factory settings
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating a Drum Kit
You can edit the individual sounds in each kit to
customize them for your musical style.
Individual head and rim settings (Link)
For some pads, you can assign different instruments to
the head and rim (for a cymbal, to the bow and the bell).
To enable this, turn Link off.
Changing the Instrument
1. In the INST screen, press the [F1] (LINK) button
On the TD, each instrumental sound, such as the kick
drum or snare drum within the drum kit, is called an
“instrument (INST).”
Each time you press the button, LINK will turn on/off.
Value
ON
Description
For SNARE, TOM1–3, HIHAT, CRASH1–2, RIDE,
and AUX (TD-15 only), the head and rim
settings (instrument, tuning, muffling, pad
volume, pan) will change in tandem.
button
The KIT MENU screen will appear.
For SNARE, TOM1–3, HIHAT, CRASH1–2, RIDE,
and AUX (TD-15 only), the head and rim
settings can be changed independently.
OFF
Previewing (auditioning) an instrument
2. Press the [F1] (INST) button
When the INST screen is displayed, you can strike the
pad or press the [F3] (PREVIEW) button to preview the
selected instrument.
The INST screen will appear.
Instrument type
(instrument group)
Instrument
number
Instrument
Pad name
3. Strike the pad whose instrument you want to
change
The edit screen for the pad you struck will appear.
MEMO
Alternatively, you can use the cursor buttons (
/
) to
move the cursor to the pad name, and then use the
value dial to select a pad.
4. Use the cursor buttons (
/
) to move the cursor
to the desired instrument group or instrument
5. Use the value dial to change the instrument
group or instrument
6. Press the [EXIT] button several times to return to
the DRUM KIT screen
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating a Drum Kit
Parameter
Fixed HH
Value
Description
Instrument Edit
The openness
of the hi-hat can
be changed by
the pedal.
NORMAL
NORMAL,
FIXED1–4
button
The openness of
the hi-hat will be
fixed.
The KIT MENU screen will appear.
FIXED
2. Press the [F1] (INST) button
Adjusts the brightness of the
tone. Positive (+) values make
the tone brighter; negative (-)
values make the tone darker.
The INST screen will appear.
Tone Color -50–+50
3. Strike the pad whose instrument settings you
want to edit
Volume
Pan
0–100
Specifies the volume.
The edit screen for the pad you struck will appear.
Specifies the pan (stereo
position).
L15–CENTER–R15
4. Press the [F2] (EDIT) button
The INST EDIT screen will appear.
Drum Kit Volume
The“+”indication is shown if the head
and rim are set to different values even
though LINK is on.
1. In the INST EDIT screen, press the [F3] (KIT VOL)
button
The KIT VOLUME screen will appear.
5. Use the cursor buttons (
/
) to select a
parameter
2. Use the cursor buttons (
/
) to select a
6. Use the value dial to edit the value of that
parameter
parameter
3. Use the value dial to edit the value of that
For details on the parameters that can be edited, refer to
“INST EDIT parameter list”below.
parameter
7. Press the [EXIT] button several times to return to
Parameter
Value
Description
the DRUM KIT screen
Kit Volume 0–100
Overall drum kit volume
Pedal HH
0–100
Pedal hi-hat volume
Cross-stick volume
Volume
INST EDIT parameter list
Xstick
0–100
Volume
* The editable parameters will differ depending on the
instrument group.
4. Press the [EXIT] button several times to return to
Parameter
Tuning
Value
Description
the DRUM KIT screen
Negative (-) values will lower
the pitch, and positive (+)
values will raise the pitch.
-240–+240
Larger values will decrease
the resonance, emphasizing
the attack of the sound.
Muffling
0–50
Higher values will make the
snare resonance louder.
Snare Buzz 0–10
Higher values make the
strainer (snare) tension
tighter.
Strainer
1–10
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating a Drum Kit
Using the Effects (FX)
How each effect works
AMBIENCE
This produces an ambience (room reverberation) that’s ideal for drum sounds.
You can adjust the room ambience (the type and size of the room) and the reverb
(reverberation).
MULTI-FX
This is a powerful multi-effect that can be used to transform your sound.
You can use it to distort the sound, or give it depth and spaciousness.
EQ
This is a four-band (low, two mid bands, high) equalizer.
Use it to adjust the tonal character.
The edit screen for the selected effect will appear.
Basic procedure
Use the cursor buttons (
) to select a parameter.
/
Use the value dial to
edit the value.
button
The KIT MENU screen will appear.
2. Press the [F2] (FX) button
The FX screen will appear.
3. Press a function button to select the item that
you want to edit
[F1] (AMBIENCE)
[F2] (MULTI-FX)
[F3] (EQ)
Ambience
Use the [F1]–[F3] buttons to switch
tabs (screens).
Multi-effect
Equalizer
* The MULTI-FX function is provided only on the TD-15.
4. Press the [EXIT] button several times to return to
the DRUM KIT screen
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating a Drum Kit
FX parameter list
Parameter
[F1] (AMBIENCE)
Type
Value
Description
10 types
1–7
Type of ambience
Character
Character of the ambience sound
TINY, SMALL, MEDIUM,
LARGE, HUGE
Size
Size of the room
CURTAIN, CLOTH, WOOD,
PLASTER, CONCRETE,
GLASS
Wall Type
Material of the walls
Shape
0–100
0–100
0–100
Width of the room
Level
Overall amount of ambience
Amount sent from each pad to the ambience
Ambience Send
0–100
Amount sent from the multi-effect to the ambience
MFX to Ambi Send
[F2] (MULTI-FX)
Type of multi-effect
Type
10 types
For details on multi-effect’s parameters, download“Data List”(PDF file) from“TD-15”in
the“Owner’s Manuals”list on the Roland website (http://www.roland.com/support/en/).
[F3] (EQ)
High Freq
High Gain
Low Freq
Low Gain
Mid1 Freq
1 kHz–8 kHz
-12 dB–+12 dB
20 Hz–1 kHz
-12 dB–+12 dB
20 Hz–8 kHz
Frequency of the high region
Amount of boost/cut for the high region
Frequency of the low region
Amount of boost/cut for the low region
Frequency of the mid-1 region
Width of the mid-1 region
Mid1 Q
0.5, 1.0, 2.0, 4.0, 8.0
Larger values make the width more narrow.
Mid1 Gain
Mid2 Freq
-12 dB–+12 dB
20 Hz–8 kHz
Amount of boost/cut for the mid-1 region
Frequency of the mid-2 region
Width of the mid-2 region
Mid2 Q
0.5, 1.0, 2.0, 4.0, 8.0
-12 dB–+12 dB
Larger values make the width more narrow.
Mid2 Gain
Amount of boost/cut for the mid-2 region
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating a Drum Kit
5. Use the value dial to specify the amount of
ambience (send level)
Adjusting the Amount of
Ambience for Each Pad (SEND)
Value
0–100
You can adjust the amount of ambience (the send level)
for each pad.
6. Press the [EXIT] button several times to return to
the DRUM KIT screen
1. Access the AMBIENCE screen as described in
Turning the Multi-Effect On/Off for
Each Pad (SWITCH)
2. Press the [F3] (SEND) button
The AMBIENCE SEND screen will appear.
3. Press the [F1] (LINK) button to turn Link on/off
You can specify whether the multi-effect will be applied
to each pad (on) or not applied (off).
4. Select a pad, either by striking that pad or by
pressing the [F2] ( ) or [F3] ( ) buttons
1. Access the MULTI-FX screen as described in steps
The cursor will move to the pad you selected.
2. Press the [F3] (SWITCH) button
Link icon
The MULTI-FX SWITCH screen will appear.
3. Press the [F1] (LINK) button to turn Link on/off
4. Select a pad, either by striking that pad or by
pressing the [F2] ( ) or [F3] ( ) buttons
The cursor will move to the pad you selected.
For details on the screen, refer to the explanation of the
AMBIENCE SEND screen (p. 21).
5. Use the value dial to turn the effect on/off
6. Press the [EXIT] button several times to return to
If you press the [F1] (LINK) button to make the Link icon
light (on), the parameters of the head and rim (for a
cymbal, the bow and edge; for a ride cymbal, the bow,
edge, and bell) can be edited simultaneously.
the DRUM KIT screen
If this is off, each can be set independently.
Indication in the
Pad
screen
K
Kick
S
Snare
T1–T3
HH
Tom 1–3
Hi-hat
Crash 1, 2
Ride
C1, C2
RD
Pad connected to the AUX jack
AUX
MFX
Ambience send amount from MFX
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating a Drum Kit
Naming a Drum Kit
Changing the MIDI Note
Number of Each Pad
You can assign a name of up to 12 characters to each
drum kit.
You can also assign a sub title of up to 14 characters
below the kit to indicate the musical style or the date on
which you created the kit.
Here’s how to change the MIDI note number that is
transmitted and received by each pad.
MEMO
The settings in this screen will be ignored if the
SYSTEM menu setting“Std MIDI Setup Lock”is“ON”
button
The KIT MENU screen will appear.
2. Press the [F3] (NAME) button
button
The KIT NAME screen will appear.
The KIT MENU screen will appear.
Drum kit name
Sub title
2. Press the cursor buttons (
/
) or the [MENU]
button to scroll the screen, and press the [F1]
(MIDI) button
The MIDI NOTE NUMBER screen will appear.
3. Strike the pad whose settings you want to
change
The edit screen of the pad you struck will appear.
3. Press the [F1] ( ) or [F2] ( ) button to move the
cursor to the character that you want to change
MEMO
You can also select a pad by using the cursor buttons
4. Use the value dial to change the character
(
/
).
You can delete or insert a character by holding down
the [F3] (DEL/INS) button and pressing the [F1] or [F2]
button.
Button
Description
Deletes the character at the cursor
position; subsequent characters will
move one place to the left.
[F3]+[F1] (DEL)
Inserts a space at the cursor position;
subsequent characters will move one
place to the right.
Press the [F2] ( ) or [F3] ( ) buttons to select the head/
rim (bow/edge/bell) of each pad.
[F3]+[F2] (INS)
4. Use the value dial to edit the value
5. Press the [EXIT] button several times to return to
Value
0–127, OFF
the DRUM KIT screen
* If the same note number as another pad is selected,
an“*”is shown at the right of the note number.
5. Press the [EXIT] button several times to return to
the DRUM KIT screen
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating a Drum Kit
3. Press the [F1] (SEL) button to specify whether
you want to copy a drum kit or a pad
Copying and Pasting a Drum
Kit or Pad
When copying a drum kit
Drum kit name
You can copy the settings of a drum kit or pad, and paste
them to another kit or pad.
NOTE
When you execute the paste operation, the contents
of the paste-destination will be erased. Use this
operation with caution.
When copying a pad
Pad name
The contents that are copied
For a drum kit
Copied settings
Remarks
Settings for the entire
drum kit
Volume, drum kit name
On/off, performance location,
wall material, amount, etc.
Ambience settings
Equalizer settings
High/mid/low adjustment
4. Use the value dial to select the drum kit or pad
that you want to copy
—
MEMO
MFX settings
• You can also strike a pad to audition the drum kit or
pad that you’re copying.
Instrument,
INST EDIT parameters,
MIDI note numbers
Settings for each pad
• When copying and pasting a pad, you can also switch
the drum kit. Use the cursor buttons (
/
) to move
the cursor to the drum kit name, and use the value
dial to change drum kits.
For a pad
Copied settings
Remarks
5. Press the [F2] (COPY) button
Instrument,
INST EDIT parameters
The contents of the drum kit or pad will be copied to the
clipboard.
Instrument settings
* Effect settings and MIDI note numbers are not
copied.
6. Use the value dial to select the paste-destination
drum kit or pad
MEMO
The instrument settings of both the head and rim will
be copied at the same time.
button
The KIT MENU screen will appear.
2. Press the cursor buttons (
/
) or the [MENU]
button to scroll the screen, and press the [F2]
(COPY/PASTE) button
The COPY/PASTE screen will appear.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating a Drum Kit
7. Press the [F3] (PASTE) button
Saving a Drum Kit to a USB
Flash Drive
If you’re pasting a pad, the paste operation will occur at
this point.
If you’re pasting a drum kit, a confirmation screen will
appear.
Here’s how you can save a drum kit to your USB flash
drive.
Saving a Drum Kit
* If you decide to cancel, press [F1] (CANCEL).
2. Make sure that the drum kit you want to save is
selected
8. Press the [F3] (OK) button
The contents of the clipboard will be overwritten onto
the paste-destination.
button
The KIT MENU screen will appear.
9. Press the [EXIT] button several times to return to
the DRUM KIT screen
4. Press the cursor buttons (
/
) or the [MENU]
button to scroll the screen, and press the [F3]
(SAVE/LOAD) button
The 1 KIT SAVE/LOAD screen will appear.
5. Press the [F1] (SAVE) button
The 1 KIT SAVE screen will appear.
6. Use the cursor buttons (
/
) or the value dial to
specify the save-destination
7. Press the [F3] (SAVE) button
* If data already exists at the save-destination, a
confirmation screen will appear.
Press the [F3] (OK) button to execute the save
operation. If you decide to cancel, press the [F1]
(CANCEL) button.
The drum kit you selected in step 2 will be saved to your
USB flash drive.
When the data has been saved, the screen will indicate
“Completed”and return to the DRUM KIT screen.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating a Drum Kit
Loading a Drum Kit from a USB
Flash Drive into the TD
Restoring a Drum Kit to the
Factory Settings
Here’s how the currently selected drum kit can be
restored to its factory-set state.
2. Make sure that the loading-destination drum kit
An accidentally-overwritten drum kit can also be
restored by this operation.
is selected
NOTE
The currently selected drum kit will be overwritten.
button
The KIT MENU screen will appear.
1. Make sure that you’ve selected the drum kit that
you want to restore to its original state
4. Press the cursor buttons (
/
) or the [MENU]
button to scroll the screen, and press the [F3]
(SAVE/LOAD) button
The 1 KIT SAVE/LOAD screen will appear.
button
The KIT MENU screen will appear.
5. Press the [F3] (LOAD) button
3. Press the cursor buttons (
/
) or the [MENU]
The 1 KIT LOAD screen will appear.
button to scroll the screen, and press the [F1]
(1 KIT RESTORE) button
The 1 KIT RESTORE screen will appear, and a list of the
factory-set drum kits will be shown.
6. Use the cursor buttons (
/
) or the value dial to
select the drum kit that you want to load
7. Press the [F3] (LOAD) button
4. Use the cursor buttons (
/
) or the value dial to
A confirmation screen will appear.
select the desired drum kit
5. Press the [F3] (RESTORE) button
A confirmation screen will appear.
* If you decide to cancel, press the [F1] (CANCEL)
button.
8. Press the [F3] (OK) button
* If you decide to cancel, press the [F1] (CANCEL)
button.
The drum kit from the USB flash drive will be overwritten
onto the drum kit you selected in step 2.
When loading is finished, the screen will indicate
“Completed”and return to the DRUM KIT screen.
6. Press the [F3] (OK) button
When the data has been restored, the screen will indicate
“Completed”and return to the DRUM KIT screen.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Performing Along with a Song
The TD contains built-in-songs and phrases covering a
Audio files that can be played by the TD
variety of styles selected for enhancing your practice
time. You can play the drums while listening to one of
these songs.
You can play back audio files of the following formats
from a USB flash drive.
If a USB flash drive is connected, you can play the drums
while listening to one of your favorite songs from the
USB flash drive.
MP3
Sampling rate
Bit rates
44.1 kHz
64 kbps–320 kbps
Song structure
WAV
Sampling rate
Bit depth
44.1 kHz
A song contains MP3 or WAV audio tracks and drum
tracks (MIDI data) containing a drum performance.
8, 16, 24-bit
For some internal songs there is a guide drum part on its
drum track, which you can mute in order to play along
with the song.
When transferring files from your
computer to a USB flash drive
You can also use the QUICK REC function to record your
performance with the songs.
After doing so, when playing them back you can mute
the drum part you have recorded.
Audio files can be played back not only from the root
level (top level) of the USB flash drive, but also from
within a folder.
Song
Audio track
* The file name will be the song name.
Drum track
* Use only single-byte alphanumeric characters in the
file name.
* File names containing more than 14 characters
or containing double-byte characters will not be
displayed correctly.
* You can put up to 100 song files in a single folder.
* Make sure that no single file is larger than 2 GB.
This button is shown if the song
contains drum data.
* The song’s performance data is not transmitted from
the MIDI OUT connector.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Performing Along with a Song
Selecting a Song
Playing the Song
1. Use the following buttons to play back the song
If you want to select a song from a USB flash drive, you
must first connect the USB flash drive to the TD (p. 9).
NOTE
Button
Function
If you have recorded your drum performance along
with a song, this data will be lost when changing
songs.
[
]
Play/stop song
Selects the previous song.
[F1] (
)
)
Hold down to rewind the song.
Selects the next song.
1. Press the [SONG] button
[F2] (
Hold down to fast-forward the song.
The button will light, and the SONG screen will appear.
[F3] (DRUM)
Drum track on/off
* If the song contains a drum track, playback cannot
be started from a point midway through the song.
Playback will start from the beginning of the song
when such songs are played back.
* You can’t fast-forward or rewind a song that contains
a drum track.
Use the cursor buttons (
songs (Internal) and songs (or folder names) on the USB
flash drive.
/
) to switch between internal
2. To stop, press the [
] button
The [
stop.
] button will go dark, and song playback will
MEMO
For details on how to select a folder, refer to
MEMO
• In the DRUM KIT screen, you can hold down the
2. Use the value dial or the [F1] ( )/[F2] (
)
[SONG] button and press the [
stop the song.
] button to play/
buttons to select a song
• If you press the [SONG]/[EXIT]/[DRUM KIT] button,
you will return to the DRUM KIT screen but the song
will continue playing.
About the SONG screen
This symbol is shown while the
song is playing.
Song name
Song number
This is the name of
the currently selected
song.
This is the number of
the currently selected
song.
Elapsed time
Song playback
speed (p. 28)
Song playback
position
Loop on/off
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Performing Along with a Song
Selecting a Folder
Changing the Song Settings
1. In the SONG MENU screen, press the [F2]
1. In the SONG screen, press the [MENU] button
(FOLDER) button
The SONG MENU screen will appear.
The FOLDER SELECTION screen will appear.
2. Use the cursor buttons (
/
) or the [MENU]
button to scroll the screen
3. Press the [F1]–[F3] buttons to select the menu
item whose settings you want to change, and
use the value dial to edit the value
Button
Value
Description
[F1] (VOLUME)
0–100
Song volume
2. Select a folder
Song playback tempo
(*)
[F2] (SPEED)
[F3] (A-B)
80–120 %
Button
Description
Specifies the repeat playback setting (p. 29).
Cursor buttons
If you press this while making the setting,
repeat playback will be turned off.
(
/
)/
Select a folder.
Value dial
(*)
[F1] (BACK)
[F2] (OPEN)
Show the higher-level folder.
Show the lower-level folder.
When the song has
played back to the end,
ON
playback will return to
the beginning of the
song and continue.
[F1] (LOOP)
3. Press the [F3] (OK) button to confirm your choice
of folder
Playback will stop
OFF
when the song has
played back to the end.
MEMO
The files and folders in the folder you selected will
play back.
Selects a folder within the USB flash drive
[F2] (FOLDER)
[F3] (INFO)
Displays information about the song (p. 29).
(*) This function is not available for songs that contain a drum
track.
4. Press the [EXIT] button several times to return to
the SONG screen
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Performing Along with a Song
4. At the location where you want to stop
Repeatedly Playing a Specified
Region (A-B Repeat)
repeating, press the [F3] (SET B) button
The“B”character will light, and the song will continue
repeating between“A”and“B.”
You can use the“A-B Repeat”function to repeatedly play
back a specified region.
A
B
Repeat
If you want to respecify the region, press the [F3] (RESET)
button.
If you press the [F1] (CANCEL) button, conventional
playback will resume and the A-B REPEAT screen will
close.
NOTE
This setting cannot be made if the repeat region is
too short.
1. Select a song and play it back
2. In the SONG MENU screen, press the [F3] (A-B)
Viewing Song Information
button
The A-B REPEAT screen will appear, and the character“A”
will blink.
1. In the SONG MENU screen, press the [F3] (INFO)
button
The SONG INFORMATION screen will appear.
Song name
Rewind
Fast-forward
MEMO
Display
Length
Size
Description
You can use the [F1] ( )/[F2] ( ) buttons to fast-
forward/rewind the song.
Song playback duration
File size
Volume
Loop
Song volume (p. 28)
Loop playback on/off (p. 28)
3. At the location where you want to start
repeating, press the [F3] (SET A) button
The“A”character will light, and the“B”character will
blink.
2. Press the [F3] (OK) button to close the screen
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Performing Along with a Song
Play Along with a Song and Record
Your Performance (QUICK REC)
Where the recorded data is exported
When a USB flash drive is connected,
your recorded data is automatically
exported to the USB flash drive. Only the
five most recent recorded performances
will be exported as SMF data (p. 14).
Here’s how you can play the drums along with a song
and record your performance.
* You must first select the drum kit and song that you
want to use for practicing (performing).
The recorded data is saved in the following folder
of the USB flash drive.
* The sound from the MIX IN jack will not be recorded.
1. In the SONG screen, select a song
Roland
2. Press the [ ] (QUICK REC) button
TD-15 or TD-11
The QUICK REC screen will appear, and the TD will be in
record-standby mode.
Backup
Kit
QUICK REC
SONG_01 MID
SONG_02 MID
SONG_03 MID
SONG_04 MID
SONG_05 MID
3. Press the [
] button to begin recording
NOTE
• When recording begins, the previous recording will
be completely erased.
• When you switch songs, the previous recording will
be completely erased.
• You can’t change the speed of a recorded song.
4. Play the drums along with the song
5. Press the [
] button to stop recording
6. Once again press the [
] button
The recorded performance will play back.
7. Press the [
] button to stop playback
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Practicing in Coach Mode
The TD’s Coach mode is a unique set of exercises
specifically designed to help build speed, accuracy and
stamina, as well as develop better timing skills.
Correctly Playing in Time with the Beat
(TIME CHECK)
Throughout the Coach modes, you will discover that
some of them have programmable parameters, allowing
you to adapt the functions to your specific needs.
This mode lets you practice playing accurately along
with the metronome.
Start practicing
Selecting a Practice Menu
In the COACH MENU screen, press the [F1] (TIME CHECK)
button; practice will start immediately.
1. Press the [COACH] button so it’s lit
1. Strike the pad in time with the metronome
The COACH MENU screen will appear.
The percentage of your strikes that were played with
accurate timing is displayed as a“%”value.
2. Select a menu item, and start practicing
When you press a button, the corresponding practice
menu item will start immediately.
The screen will indicate whether your pad strikes match
the beat sounded by the metronome.
Button Menu item
Description
Strengthens your ability to
play accurate rhythms.
[F1]
[F2]
TIME CHECK (p. 31)
Scoring
Strengthens your ability to
maintain the tempo internally.
QUIET COUNT (p. 32)
WARM UPS (p. 32)
end when you’ve finished practicing the specified
number of measures. Then your performance will be
scored, and the results will appear in the screen.
When you want to get
warmed up before you begin
practicing.
[F3]
Operations common to Coach mode
Basic operations (e.g., changing the tempo, and starting/
stopping) are the same in each of the three Coach mode
items.
Operation
Button/Dial
Settings
Change the
tempo
In the TIME CHECK screen, press the [F2] (SETUP) button
to access the settings screen.
Value dial
[F3] (START)/[
]
Start
Parameter
Value
Description
Specifies whether the score will be shown in the
screen.
[F1] (STOP)/[
[F2] (SETUP)
]
Stop
Make settings
Your performance will not be scored.
OFF
Only the timing will be checked.
Exit Coach mode [COACH]
Score
The score will be shown in the screen.
ON
You can also specify the number of
When using Warm Ups, you can pause by pressing the [F3]
(PAUSE) button.
(4, 8, 16, 32
meas)
measures you’ll practice before being
scored.
Specifies the strictness of scoring.
Grade
EASY
Normal
HARD
Timing will be checked more strictly.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Practicing in Coach Mode
Parameter
Value
Description
Settings
Display 1
Display 2
In the QUIET COUNT screen, press the [F2] (SETUP)
button to access the settings screen.
In the screen, select the pad for which a timing graph
will be shown.
LEFT
BEHIND
The left side of the timing graph is
shown as BEHIND (late).
Parameter
Measures
Value
Description
Gauge
Specify the length (measures) of the
interval for which the metronome will
LEFT
AHEAD
The left side of the timing graph is
shown as AHEAD (early).
2, 4, 8, 16
(Measures) alternate between“Sounding”and
“Quiet.”
* You can press the [F2] (METRO) button to make
metronome settings (p. 13).
Of the measures specified by“Measures,”this setting
specifies the length of the measures that will be“Quiet.”
The length of the Quiet interval will
RANDOM
randomly change each time.
Developing Internal Timing Sense
(QUIET COUNT)
Quiet
Specifies the length (number of
measures) of the Quiet interval.
1, 2, 4
* This setting cannot be longer than half
This mode will help you develop a good sense of time/
tempo.
of the Measures value.
For the first few measures, the metronome will sound at
the specified volume; over the next few measures, the
volume will diminish until it is nearly inaudible. This cycle
of several measures will continue until you stop it.
* You can press the [F2] (METRO) button to make
metronome settings (p. 13).
WARM UPS
Start practicing
In this mode you’ll successively practice steps 1–3, be
graded on your performance at each step, and then
receive a final evaluation.
In the COACH MENU screen, press the [F2] (QUIET
COUNT) button; practice will start immediately.
You can choose one of three courses, ranging from easy
to difficult. You can also adjust the tempo according to
your level of skill.
1. Strike the pads in time with the metronome
• The metronome will sound during the first few
measures. When you reach the last measure during
which the metronome will sound, the screen will
indicate“Ready.”
MEMO
After you’ve started WARM UPS, you can press the
[F3] (PAUSE) button to pause the WARM UPS.
• When the metronome stops sounding, the screen
indication will change to“Quiet.”Continue striking
the pads during this time.
To resume practicing, press the [F3] (START) button
once again.
If you’re finished with WARM UPS, press the [F1]
(STOP) button.
• After the Quiet region, the proportion of your strikes
that were played at an accurate tempo are shown as
a“%”value.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Practicing in Coach Mode
Step 1: Change-Up
Overall evaluation
In this step, the rhythm type will change every two
measures.
This grades your performance at each step, and displays
the overall evaluation.
Starting from half notes, the note values will gradually
become shorter, and will then return to half notes; this
change in rhythms will be repeated.
Evaluation EXCELLENT!, VERY GOOD!, GOOD, AVERAGE,
(display)
START OVER
Step 2: Auto Up/Down
Settings
The tempo will gradually be raised and lowered.
In the WARM UPS screen, press the [F2] (SETUP) button to
access the settings screen.
The tempo will increase by 1 BPM (beat-per-minute) for
each beat until the metronome reaches the upper limit;
then the tempo will continue slowing down by 1 BPM
until it reaches the initial tempo.
Param-
eter
Value
Description
MINS or 15 MINS.
Specifies the time.
Time required: 5 minutes
5 MINS
Change-Up: 2 minutes
Time Check: 3 minutes
Time required: 10 minutes
Change-Up: 3 minutes
Auto Up/Down: 3 minutes
Time Check: 4 minutes
Duration
10 MINS
Time required: 15 minutes
Change-Up: 5 minutes
Auto Up/Down:5 minutes
Time Check: 5 minutes
* The current tempo value will be the lower tempo
limit.
15 MINS
MEMO
Specifies the strictness of scoring.
While practicing, you can press the [F1] (SET MAX)
button to specify the current tempo as the upper
limit; if you press the [F1] (CLR MAX) button, the
upper tempo limit will return to 260.
Grade
EASY
Normal
HARD
Timing will be checked more strictly.
Step 1: Selects the pattern by which the rhythm will vary
during Change-up.
Step 3:Time Check
At this step, the accuracy of your playing will be checked
against the metronome. You can see in the screen if you
are ahead, behind or on the beat.
Change-
Up
Max
Tempo
Step 2: Specifies the upper tempo limit during step 2: Auto
Up/Down.
* You can press the [F2] (METRO) button to make
metronome settings (p. 13).
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings for the Entire TD (SYSTEM)
Parameters that apply to the entire TD, such as the metronome settings and the pad sensitivity, are called“system parameters.”
Here we’ll explain the procedure for setting the system parameters, and what each parameter does.
Basic procedure
The KIT MENU screen will appear.
2. Press the ( ) cursor button to scroll the screen until the SYSTEM icon appears
3. Press the [F3] (SYSTEM) button
The SYSTEM screen will appear.
4. Use the cursor buttons (
/
) to select the desired menu of settings
The following menus are available.
Menu
Description
Page
Settings for display contrast and power
(Auto Off)
Options
Metronome
Metronome settings
Allows you to set the function of the
pad connected to the TRIGGER IN AUX
jack.
Pad Control
MIDI
MIDI-related settings
Using a USB flash drive
USB Memory
Refer to the separate document“About
the Wireless LAN Function.”
Wireless
—
Pad Settings
Information
Factory Reset
Pad settings
View information about the TD itself
Reset the TD to its factory settings
5. Press the [F3] (ENTER) button
The corresponding settings screen will appear.
6. Use the cursor buttons (
/
) to select a parameter, and use the value dial to change the value of the
parameter
7. Press the [EXIT] button several times to return to the DRUM KIT screen
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings for the Entire TD (SYSTEM)
Overall Settings for the TD (Options)
Parameter
Value
1–10
1–10
Description
Adjusts the contrast of the display.
MEMO
Display Contrast
Display Brightness
In the DRUM KIT screen, you can adjust this by holding down the [MENU] button and
turning the value dial.
Adjusts the brightness of the display.
You can make the ring of the value dial light up in synchronization with your performance.
OFF
The ring will not light.
DYNAMIC
KICK
The ring will light according to the dynamics of your playing.
The ring will light when you play the kick drum.
The ring will light in synchronization with the tempo setting.
Illumination Ring
TEMPO
You can make the [DRUM KIT] buttons light up.
OFF
ON
The [DRUM KIT] buttons will not light.
The [DRUM KIT] buttons will light.
Illumination Kit Buttons
When shipped from the factory, the TD is set to automatically power-off when 30 minutes have elapsed since
it was last played or operated. Approximately five minutes before the power turns off, a message will appear
in the display.
OFF
The power will not turn off automatically.
Auto Off
10 MINS
30 MINS
4 HOURS
The power will turn off automatically when 10 minutes have elapsed.
The power will turn off automatically when 30 minutes have elapsed.
The power will turn off automatically when four hours have elapsed.
Adjusts the volume when using the TD to listen to audio data played back from your
computer.
USB Audio Volume
Write Protect
0–100
OFF, ON
If the Write Protect setting is ON, it will not be possible to save any settings.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings for the Entire TD (SYSTEM)
Metronome Setup
(Metronome)
“Metronome” and press the [F3] (ENTER) button
to access the METRONOME SETUP screen
Using a Pad as a Switch
(Pad Control)
A pad connected to the TRIGGER IN AUX jack can
function as a switch to change drum kits or to start/stop
a song.
* This setting is valid only in the DRUM KIT screen and
the SONG screen.
NOTE
that’s connected.
“Pad Control” and press the [F3] (ENTER) button
to access the PAD CONTROL screen
2. From the following list, select the item that you
want to set
2. Use the cursor buttons (
/
) to move the cursor
to “AUX Head” or “AUX Rim ”
Button
Description
[F1] (TIMSIG)
[F2] (SOUND)
Set the time signature of the metronome.
Set the volume of the metronome.
AUX Head
Use incoming MIDI messages from
your DAW software etc. to sound the
metronome.
[F3] (MIDI)
3. Use the cursor buttons (
/
) to select a
AUX Rim
parameter, and use the value dial to edit the
setting
3. Use the value dial to select the function that you
Parameter
TIMSIG
Value
Description
want to control
Metronome time
signature
Function
OFF
Description
Beat
1–9
Disables the pad control function.
Selects the next kit.
Half notes, quarter
notes, eighth
KIT+
notes, eighth note
triplets, sixteenth
notes (shown as a
note symbol)
KIT-
Selects the previous kit.
Starts song playback.
Stops song playback.
Rhythm Type
Metronome interval
SONG PLAY
SONG STOP
SOUND
Sound
Volume
Pan
SONG PLAY/
STOP
Starts/stops song playback each time you
strike the pad.
15 types
0–10
Metronome tone
Set the tempo according to the interval at
which you strike the pad.
Metronome volume
TAP TEMPO
L15–CENTER–R15 Metronome panning
OUTPUT+
PHONES,
PHONES ONLY
Metronome output
destination
Output
MIDI
MIDI channel that will
OFF, 1–16
MIDI Channel
sound the metronome
Note number for the
0 (C-1)–127 (G9)
Note# Accent
Note# Normal
first beat
Note number for
0 (C-1)–127 (G9)
subsequent beats
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings for the Entire TD (SYSTEM)
MIDI-Related Settings (MIDI)
Here you can set MIDI settings for the entire TD.
There are many possibilities when using MIDI, such as:
Use the pads to play external MIDI instruments
You can layer sounds on the TD as well as play sounds from MIDI sound modules and
samplers.
Use the TD as a sound module
Using the DAW software, you can use the TD as a dedicated drum sound module.
Control an external video device
When connected to a video device, you can use the TD to switch images.
Parameter
[F1] (MIDI)
Value
Description
Std MIDI Setup Lock OFF, ON
MIDI Channel OFF, 1–16
Turn this ON if you’re using V-Drums Friend Jam or V-Drums Tutor (sold separately) (p. 47).
Specifies the transmit/receive channel
Specifies whether the TD’s pads will be
connected to the internal sound generator
DAW software on your computer
(ON) or disconnected from the internal
sound generator (OFF).
Recording
MIDI Thru: ON
Normally you will leave this“ON.”However,
you should choose the“OFF”setting when
you’re using the TD’s pads only to control an
external sound module, or when using the
TD in conjunction with DAW software on
your computer.
TD
Internal
Sound
Generator
Local Control
OFF, ON
Using Local Control
Local Control: OFF
Pad
When using the TD in conjunction with your
DAW software, the notes you play by striking
the pads might be sounded in duplicate
together with the notes that are“echoed-
back”by your DAW software.
If this occurs, set Local Control to the“OFF”setting so that the TD’s pads will be disconnected
from the internal sound generator, allowing you to use the TD in conjunction with the DAW
software on your computer as shown in the illustration.
If this function is“ON,”incoming MIDI data that matches a pad’s assignment will cause the
screen to show the edit screen of the instrument used by that pad, or cause the cursor to
move.
Note Chase
OFF, ON
OFF, ON
Specifies whether program change messages will be transmitted (ON) or not transmitted
(OFF).
Prog Change Tx
If this is“ON,”a program number will be transmitted when you switch drum kits on the TD.
Specifies whether program change messages arriving from DAW software on your computer
will be received (ON) or ignored (OFF).
Prog Change Rx
OFF, ON
If this is“ON,”incoming program changes will select the drum kit of the corresponding
number.
[F2] (VISUAL)
Visual Control
Turn this“ON”if you want to control a video device (sold separately) in synchronization with
your performance (p. 47).
OFF, ON
This will always be“OFF”when you turn on the power.
Set this as appropriate for the video device that’s connected.
MIDI channel used to switch images.
Control Mode
MIDI Channel
MVC, V-LINK
1-16
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings for the Entire TD (SYSTEM)
1. Choose “Save Backup“ and press the [F3] (ENTER)
Using USB Flash Drive
(USB Memory)
2. Use the value dial to select the save-destination
number
Next you can assign a name to the data that will be
saved.
If you don’t need to assign a name, proceed to step 7.
“USB Memory” and then press the [F3] (ENTER)
button to access the USB MEMORY screen
3. Press the [F2] (NAME) button
The SAVE screen will appear.
You can assign a name of up to eight characters.
3. Use the cursor buttons (
/
) to select the
desired menu item
4. Press the [F1] ( ) or [F2] ( ) button to move the
You can choose from the following menu items.
cursor to the character that you want to change
Menu
Description
Page
5. Use the value dial to change the character
Save Backup
Here you can hold down the [F3] (DEL/INS) button and
use the [F1][F2]buttons to delete or insert a character.
Load data from the USB flash
Load Backup
Delete Data
drive into the TD.
Delete data from the USB flash
drive.
Button
Description
Deletes the character at the cursor
location, and moves the subsequent
characters one place to the left.
View information about the USB
flash drive.
[F3]+[F1] (DEL)
Information
Format
Format the USB flash drive.
Inserts a space at the cursor location
and moves the subsequent characters
one place to the right.
[F3]+[F2] (INS)
Saving Data to a USB Flash Drive
(Save Backup)
6. When you’ve assigned a name, press the [EXIT]
button to return to the previous screen
7. Press the [F3] (SAVE) button
Here’s how to save TD data to a USB flash drive.
* If you select a number in which data has already
been saved, and then press the [F3] (SAVE) button,
a confirmation message will appear, asking you
whether you really want to overwrite the data.
If you decide to cancel, press the [F1] (CANCEL)
button and then reselect the save-destination
number.
Data that will be saved
• All drum kits
• System settings
If it is OK to overwrite the existing data, press the [F3]
(OK) button.
When the data has been saved, the screen will indicate
“Completed.”
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings for the Entire TD (SYSTEM)
Loading Data from a USB Flash Drive
Back into the TD (Load Backup)
Deleting Data from a USB Flash
Drive (Delete Data)
Data you’ve saved on a USB flash drive can be loaded
back into the TD.
Here’s how to delete data that’s been saved on a USB
flash drive.
NOTE
• All data and settings in the TD will be overwritten.
ON.
1. Choose “Delete Data“ and press the [F3] (ENTER)
2. Use the cursor buttons (
/
) to choose “Data
Type,” and then use the value dial to choose the
type of data that you want to delete
1. Choose “Load Backup“ and press the [F3]
Data type
1 KIT
Description
2. Use the value dial to select the data that you
Backup data
want to load
BACKUP
3. Press the [F3] (LOAD) button
A confirmation message will appear.
3. Use the cursor buttons (
/
) to choose “File,”
and then use the value dial to select the number
of the data that you want to delete
4. Press the [F3] (DELETE) button
A confirmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
4. To load the data, press the [F3] (OK) button
When the data has been loaded, the screen will indicate
“Completed.”
If you decide to cancel, press the [F1] (CANCEL) button.
5. To delete the data, press the [F3] (OK) button
When the data has been deleted, the screen will indicate
“Completed.”
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings for the Entire TD (SYSTEM)
Viewing Information About the
USB Flash Drive (Information)
Here’s how to view information about the USB flash drive.
Formatting a USB Flash Drive
(Format)
NOTE
When you execute the Format operation, all data on
the USB flash drive will be erased.
Parameter
Backups
Kits
Description
Number of data backups
Number of saved drum kits
1. Choose “Format“ and press the [F3] (ENTER)
Amount of memory used on the USB
flash drive
Size Used
2. Press the [F3] (FORMAT) button
A confirmation message will appear.
1. Choose “Information“ and press the [F3] (ENTER)
2. When you’ve viewed the information, press the
[F3] (OK) button to close the screen
If you decide to cancel, press the [F1] (CANCEL) button.
3. If you’re sure that you want to format the USB
flash drive, press the [F3] (OK) button
Once again, a confirmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
4. If you’re sure that you want to format the USB
flash drive, press the [F3] (OK) button
When formatting has been completed, the screen will
indicate“Completed.”
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings for the Entire TD (SYSTEM)
Optimizing the Pad Settings (Pad Settings)
1. In step 4 of the basic procedure (p 34), choose“Pad Settings”and then press the [F3] (ENTER) button to access
the PAD SETTINGS screen
2. Choose one of the following items to edit
Button
Description
Page
[F1] (TYPE)
[F2] (BASIC)
[F3] (ADVNCD)
Specify the type of pad
Adjust the pad sensitivity
Make advanced settings for the trigger parameters
3. Strike a pad to select the pad for which to make settings
4. Use the cursor buttons ( ) to select a parameter, and use the value dial to edit the value
/
Specifying the Type of Pad [F1] (TYPE)
You can select the type of pad you’re using (Pad Type) so the TD will accurately receive the signal from the pad.
Parameter
Value
Description
The pad type is a collection of parameters optimized for
specific models of pad.
KD-7, KD-8, KD-9, KD-120, KD-140,
PD-8, PD-85, PD-105, PD-108, PD-125, PD-128, PDX-6, PDX-8,
PDX100,
CY-5, CY-8, CY-12C, CY-13R, CY-14C, CY-15R, VH-11,
RT-10K, RT-10S, RT-10T
If you select the appropriate trigger type for each pad you’ve
connected, all parameters (except for Crosstalk Cancel) will be
set to the optimal values.
Pad Type
However, these are only the typical values, so you may need to
make fine adjustments according to how you’ve attached the
pads or the way in which you’re using them.
The following pads should be connected to the“SNR,”“T1–3,”or“AUX”trigger input.
If these pads are connected to any other trigger input, the signal of a rim strike will not be detected correctly.
PD-85, PD-105, PD-108, PD-125, PD-128,
PDX-6, PDX-8, PDX-100,
RT-10S
Pads
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings for the Entire TD (SYSTEM)
Setting the Pad Sensitivity [F2] (BASIC)
parameters) are automatically set to the values appropriate for each pad, meaning
that you will normally not need to adjust them. If you wish to make detailed
adjustments, you can edit the following parameters for each pad.
MEMO
The velocity monitor at the left of the screen indicates the velocity.
Parameter
Pad Type
Value
Description
Refer to p. 41.
You can adjust the sensitivity of the pads to accommodate your personal playing style.
This allows you to have more dynamic control over the sound volume, based on how hard you play.
Higher sensitivity allows the pad to produce a loud volume even when played softly.
Lower sensitivity will keep the pad producing a low volume even when played forcefully.
Sensitivity
Threshold
1–32
0–31
Threshold
A
This setting allows a trigger signal to be received only when
the pad is above a determined dynamic level (velocity). This
can be used to prevent a pad from sounding because of
vibrations from other pads.
B
C
In the example at the right, B will sound but A and C will
not sound.
When set to a higher value, no sound is produced when the
pad is struck lightly.
Gradually raise the“Threshold”value while striking the pad.
Check this and adjust accordingly. Repeat this process until you get the perfect setting for your playing style.
This setting allows you to control the relation between playing velocity (striking force) and changes in volume. Adjust this
curve until the response feels as natural as possible.
Volume
The standard setting. This produces the most natural correspon-
LINEAR
dence between playing dynamics and volume change.
Playing
Dynamics
Volume
Volume
Volume
Volume
EXP1,
EXP2
Compared to LINEAR, strong dynamics produce a greater change.
Compared to LINEAR, a soft playing produces a greater change.
Extreme changes are made in response to playing dynamics.
Playing
Dynamics
Playing
Dynamics
Volume
Curve
LOG1, LOG2
Playing
Playing
Dynamics
Dynamics
SPLINE
Playing
Dynamics
Volume
Volume
Very little dynamic response, making it easy to maintain strong
volume levels. If you’re using a drum trigger as an external pad,
these settings will produce reliable triggering.
LOUD1,
LOUD2
Playing
Playing
Dynamics
Dynamics
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings for the Entire TD (SYSTEM)
Advanced Settings for the Trigger Parameters [F3] (ADVNCD)
When you specify the Pad Type (p. 41), the settings in this screen (advanced trigger parameters) will automatically be set to
the values that are most suitable for that type of pad; this means that with the exception of crosstalk cancellation, you will
normally not need to edit these settings.
You should make fine adjustments to these parameters for each pad only if you experience the problems described in the
explanation of each parameter.
1. Press one of the [F1]–[F3] buttons to select the item that you want to edit
2. Strike a pad to specify the pad whose settings you want to edit
3. Use the cursor buttons (
/
) to select a parameter
4. Use the value dial to edit the value
[F1] (SCAN)
Parameter
Pad Type
Value
Description
Refer to p. 41.
Specifies the detection time for the trigger signal.
Since the rise time of the trigger signal waveform may differ slightly depend-
ing on the characteristics of each pad or acoustic drum trigger (drum pickup),
you may notice that identical hits (velocity) may produce sound at different
volumes. If this occurs, you can adjust the“Scan Time”so that your way of
playing can be detected more precisely.
Scan Time
Time
Scan Time
0–4.0 (ms)
While repeatedly hitting the pad at a constant force, gradually raise the Scan
Time value from“0,”until the resulting volume stabilizes at the loudest level.
At this setting, try both soft and loud hits, and make sure that the volume
changes appropriately.
* As the value is set higher, the time it takes for the sound to be played increases. Set this to the lowest value
possible.
This setting prevents spurious re-triggering.
A
Important if you are using acoustic drum triggers. Such triggers can
produce altered waveforms, which may also cause inadvertent sounding
at Point A in the figure (Re-trigger).
Time
This occurs in particular at the decaying edge of the waveform. Retrig
Cancel detects such distortion in and prevents re-triggering from
occurring.
While repeatedly striking the pad, raise the“Retrig Cancel”value until
re-triggering no longer occurs.
Retrig Cancel
1–16
* Although setting this to a high value prevents re-triggering, it then becomes easy for sounds to be omitted
when the drums played fast (roll etc.). Set this to the lowest value possible while still ensuring that there is
no re-triggering.
MEMO
You can also eliminate this problem of re-triggering with the Mask Time setting (p. 44). Mask Time does not
detect trigger signals if they occur within the specified amount of time after the previous trigger signal
was received. Retrig Cancel detects the attenuation of the trigger signal level, and triggers the sound after
internally determining which trigger signals were actually generated when the head was struck, while
weeding out the other false trigger signals that need not trigger a sound.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings for the Entire TD (SYSTEM)
Parameter
Value
Description
Mask Time
This setting prevents double triggering.
When playing a kick trigger, the beater can bounce back and
hit the head a second time immediately after the intended
note—with acoustic drums sometimes the beater stays against
the head—is causes a single hit to“double trigger”(two sounds
instead of one). The Mask Time setting helps to prevent this. Once
a pad has been hit, any additional trigger signals occurring within
the specified“Mask Time”(0–64 msec) will be ignored.
Time
Sound not produced
Mask Time
0–64 (ms)
Adjust the“Mask Time”value while playing the pad.
When using a kick trigger, try to let the beater bounce back and hit the head very quickly, then raise the
“Mask Time”value until there are no more sounds made by the beater rebound.
* When set to a high value, it will be difficult to play very quickly. Set this to as low a value as you can.
MEMO
If two or more sounds are being produced when you hit the head just once, then adjust Retrig Cancel (p. 43).
This setting cancels“crosstalk,”which means that when you play one pad you hear a sound coming from
another pad. This can happen when two pads are installed on the same stand.
In some cases you can prevent crosstalk by increasing the distance between the two mounted pads.
Crosstalk Example: If you hit the snare pad and the tom 1 also sounds
Xtalk Cancel
0–80
While striking the Snare pad, gradually increase the“Xtalk Cancel”value for the tom 1 pad until the tom 1
pad no longer sounds when you hit the Snare pad. If you raise the“Xtalk Cancel”higher, the tom 1 pad will
be less prone to receive crosstalk from other pads.
* If the value is set too high, and two pads are played simultaneously, the one that is struck less forcefully
may not sound. Be careful and set this parameter to the minimum value required to prevent crosstalk.
[F2] (RIM)
Parameter
Trig Type
Value
Description
Refer to p. 41.
When a PD-8/PD-85/PD-105/PD-108/PD-125/PD-128, PDX-6/PDX-8/PDX-100, CY series pad, VH-11, or RT-10S
is connected, you can adjust the relation between your playing velocity (force) on the rim/edge and the
resulting volume level.
Rim Gain
0–8.0
Higher value allows the rim/edge to produce a loud volume even when played softly. Lower value will keep
the rim/edge producing a low volume even when played forcefully.
When a PD-85/PD-105/PD-108/PD-125/PD-128, PDX-6/PDX-8/PDX-100, or RT-10S is connected, you can
adjust the sensitivity of the head response.
Head/Rim Adj 0–80
There are some cases that you have a rim sound unexpectedly when you hit the head strongly. You can
improve this situation with decreasing the value of“Head/Rim Adj.”When you set the value too big, it might
be difficult to play the rim sound.
Specifies the striking force at which to switch between the cross-stick sound and the open rim shot sound.
With positive (+) settings, the cross stick sound will be heard even for strong strikes.
Xstick Adj
-9–+9
[F3] (HIHAT)
Parameter
Value
Description
Adjusts the sensitivity for playing foot-close or foot-splash notes.
Pedal HH Sens -5–+5
Positive (“+”) settings allow louder sounds to be produced even when you step lightly on the pedal.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings for the Entire TD (SYSTEM)
8. Press the [F3] (ADVNCD) button, and then press
Connecting the VH-11 and making
settings on the TD
the [F3] (HIHAT) button
The following screen will appear.
Connections
Clutch screw
Motion sensor unit
9. While you watch the meter that’s displayed in
the left side of the screen, turn the VH-11’s VH
offset adjustment screw to adjust it
Adjust the screw so that the
appears in the meter.
VH Offset
Adjustment Screw
TRIGGER OUT
jack
CONTRO
OPEN
CLOSE
nect the HH cable
Connect the HHC cable
VH Offset Adjustment Points
If the closed hi-hat sound is difficult to attain,
rotate the VH offset adjustment screw towards
“CLOSE.”
Settings
1. Make sure that the VH-11 is correctly connected
If the open hi-hat sound is difficult to attain,
rotate the screw towards“OPEN.”
to the TD
2. Set up the hi-hat, take your foot off the pedal,
NOTE
and power-on the TD
If the sound cuts off when you strike the hi-hat
forcefully, rotate the VH Offset adjustment
screw towards“OPEN.”
* It will be impossible to make the adjustment correctly
if the hi-hat is touching the motion sensor when you
turn on the power.
3. Loosen the clutch screw, and allow the hi-hat to
rest naturally on top of the motion sensor unit
10. Adjust other parameters as needed
4. Proceed up through step 5 of the basic
screen
NOTE
If you don’t set up the VH-11 correctly, it may not
operate correctly.
5. Press the [F1] (TYPE) button
6. Use the cursor buttons (
/
) to select “HH ”
7. Use the value dial to select “VH-11 ”
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings for the Entire TD (SYSTEM)
3. Press the [F3] (RESET) button
Viewing Information About
A confirmation message will appear.
the TD (Information)
Here you can view information about the TD itself.
Item
Description
If you decide to cancel, press the [F1] (CANCEL) button.
Program Ver
System program version
4. If you’re sure you want to execute the factory
reset, press the [F3] (OK) button
Once again, a confirmation message will appear.
Restoring the Factory Settings
(Factory Reset)
This“factory reset”operation restores all drum kits and
system settings in the TD to their factory-set state.
NOTE
• All data and settings in the TD will be lost. If the TD
contains any data or settings that you want to keep,
you must save them to a USB flash drive before you
proceed (p. 38).
If you decide to cancel, press the [F1] (CANCEL) button.
5. If you’re sure you want to execute the factory
reset, press the [F3] (OK) button
(p. 35) is ON.
When the factory reset has been completed, the screen
will indicate“Completed.”
“Factory Reset” and then press the [F3] (ENTER)
button to access the FACTORY RESET screen
2. Use the value dial to select the type of data that
you want to reset
Parameter
Target
Value
Description
All kits
ALL KITS
SYSTEM
ALL
System settings
All data
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Computer or Video Device
Connecting the TD to the
Computer
Connecting to Your Computer
via USB
If you use a commercially available USB cable to connect
the TD’s COMPUTER port to a USB port of your computer,
sound played back by your computer can be heard
through the TD, and sounds played by the TD can be
recorded on your computer.
1. Use a commercially available USB cable to
connect the COMPUTER port located on the TD’s
top panel with your computer’s USB port
You’ll also be able to use software such as V-Drums
Friend Jam and V-Drums Tutor to enjoyably practice your
drumming.
What is V-Drums Friend Jam?
V-Drums Friend Jam is a
drummer’s social networking
tool that lets you use the
USB cable
V-Drums and your computer
to enjoy practicing/
* Use a USB cable that supports USB 2.0 Hi-Speed.
competing with friends around the world. Practice
songs can be automatically downloaded from the
internet, and are also linked with Twitter.
Controlling Images
By connecting the TD to a video device that supports
MIDI Visual Control or V-LINK, you can control images in
synchronization with your performance.
What is V-Drums Tutor?
The V-Drums Tutor (sold separately) is a drumming
practice software designed to be used with Roland
V-Drums, making your practice time simple,
enjoyable, challenging and effective.
What is the MIDI Visual Control?
MIDI Visual Control is an internationally-used
recommended practice that was added to the
MIDI specification so that visual expression
could be linked with musical performance. Video
equipment that is compatible with MIDI Visual
Control can be connected to electronic musical
instruments via MIDI in order to control video
equipment in tandem with a performance.
Installing the USB Driver
Before connecting the TD to your computer, you must
first install the USB driver.
1. Install the USB driver in your computer
What is the V-LINK?
The dedicated driver for the TD-15 and TD-11 is included
in the attached CD-ROM, or you can download it from
the Roland website.
V-LINK is a function that allows music and images
to be performed together. By using MIDI to
connect two or more V-LINK compatible devices,
you can easily enjoy a wide range of visual effects
that are linked to the expressive elements of a
music performance.
Roland website
For the operating requirements, refer to the Roland
website. The driver program and installation procedure
will differ depending on your system. Please carefully
read the Readme.htm included with the files you
downloaded.
Use a MIDI cable to connect the TD’s MIDI OUT connector
to your video device.
icon will appear in the DRUM KIT screen.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you don’t hear sound, or if the system does not operate as you expect, please check the following points first.
If you are still unable to resolve the problem, contact your retailer, the nearest Roland Service Center, or an authorized Roland
distributor, as listed on the“Information”page.
Problem
Items to check
Action
Page
Is the connection cable correctly con-
nected to the TRIGGER INPUT connector?
—
Are the cables correctly connected to each
pad and pedal?
Check the connections.
Are the cables correctly connected to the
TD’s OUTPUT jacks or the PHONES jack?
Are the cables correctly connected to the
input jacks of your amp or audio system?
No sound
Could there be a problem with the
connection cables?
Try using other cables.
—
Try raising the volume of the TD.
Could the [VOLUME] knob be turned all
the way to the left?
If you’re using the TD-15, check the side
panel [VOLUME] knob as well.
Have you made the correct input selection
setting on your amp or audio system?
Check your amp or audio system.
—
—
Are the volume settings of your amp or
audio system appropriate?
Try raising the volume of your amp or
audio system.
Use a USB flash drive sold by Roland. We
cannot guarantee correct operation if any
other product is used.
Check the type of USB flash drive.
—
The TD can use USB flash drives that are
formatted in FAT format.
USB flash drive is not recognized
Check the format of the USB flash drive.
Reformat the USB flash drive using the TD.
Songs saved on the USB flash drive will
not play back correctly
Does the TD support the sampling
frequency and bit rate of the MP3 file, or
the sampling frequency and bit depth of
the WAV file?
Can’t play back MP3/WAV files
Use MP3/WAV files that the TD supports.
Playback may be unable to keep up if you raise the playback speed or change the pitch
of a high bit-rate MP3.
—
Delete unneeded files from the USB flash
drive, or use a higher-capacity USB flash
Can’t save the TD’s data to a USB flash
drive
Is there sufficient free space on the USB
flash drive?
drive.
It’s not possible to set the“A”and“B”times Make sure that there is at least one second
any closer than one second.
between the two times.
Can’t correctly set the A-B repeat times
When using an MP3 file, it might not be possible to play back the A-B repeat region
correctly.
Is the TD correctly connected to your
Check the connection to your computer.
computer?
You must first install the USB driver in your
Is the USB driver installed?
computer.
Computer does not recognize the TD
Make sure that the USB cable connecting
Use a computer and cable that support
the TD to your computer’s USB port is
USB 2.0 Hi-Speed.
compatible with USB 2.0 Hi-Speed.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages
If an error message is displayed in the TD’s screen, the TD was unable to operate correctly or was operated inappropriately.
Take the appropriate action listed below.
Message
Meaning
Action
Error messages related to MIDI
A large amount of MIDI messages was received
in a short time, and the TD was unable to
process them.
Reduce the amount of MIDI messages being transmitted
to the TD.
MIDI buffer full
Due to the excessive amount of data that the
TD needed to transmit, MIDI messages could
not be output correctly.
MIDI Tx buffer full
Reduce the amount of data being transmitted.
Error messages related to USB
USB memory full
The USB flash drive does not have enough
free space.
Either delete unneeded data, or use another USB flash drive.
Check the USB flash drive.
Check the USB memory
The USB flash drive is not working correctly.
The specified data does not exist on the USB
flash drive. Alternatively, the saved data has
been damaged.
Could not read this file
Check the USB flash drive.
The file format or song format is one that the
TD cannot read.
Unsupported format
Check the file. For the supported song formats, refer to p. 26.
Either the connected USB flash drive is one
that the TD cannot use, or a foreign object
has entered the MEMORY port and caused an a foreign object might have entered the MEMORY port.
electrical short.
Immediately disconnect the connection, and check whether
USB device error
• If this error message appears when playing back high
bit-rate MP3 data, or when you’ve raised the playback
speed of MP3 data, you may be able to solve the problem
Data could not be read fast enough from the
USB flash drive.
USB memory busy
by lowering the bit rate or setting the speed to normal.
• Use a USB flash drive sold by Roland.
Error messages related to the TD’s internal memory
The QUICK REC storage capacity is full, and
recording has stopped.
Error messages related to the system
Internal memory full
—
Contact your retailer, the nearest Roland Service Center,
or an authorized Roland distributor, as listed on the
“Information”page.
Device error
There is a problem with the internal system.
Data memory was damaged
There is a problem with internal memory.
A factory reset will be executed automatically.
Other messages (* These are not errors)
If you don’t want the power to turn off, press any button or
strike a pad.
The power will soon turn off because of the
“Auto Off”setting.
The module will turn off soon
You can also disable the“Auto Off”setting so that the power
does not turn off automatically (p. 35).
USB memory is not connected
here
A USB flash drive is not connected to the TD.
Connect a USB flash drive.
This page is invalid when Std
MIDI Setup Lock is on
If Std MIDI Setup Lock is ON, the settings of
this page are ignored.
To enable these settings, turn Std MIDI Setup Lock off (p. 37).
The operation cannot be executed because
Write Protect is on.
If you want to execute this operation, turn Write Protect off
Write Protect is ON
This function cannot be used on an internal
Not possible if recorded drum song that contains a drum track, or on a song
When you reselect the song, the drum performance you
recorded using the QUICK REC function will be erased, and
you will once again be able to use this function.
data exists
in which you recorded a drum performance
using the QUICK REC function.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Specifications
Roland TD-15
Roland TD-11: Drum Sound Module
TD-15
100
50
Drum Kits
TD-11
Ambience (10 types)
4-Band Equalizer
Multi Effect (10 types) *TD-15 ONLY
Effect Types
Quick Rec
Resolution
480 ticks per quarter note
Recording
Method
Real-time
Maximum Note
Storage
approx. 30,000 Notes
WAV/MP3
File Format
Audio File
Illumination Ring *TD-15 ONLY
Display
Dynamic, Kick, Tempo
64 x 128 dots Graphic Type LCD (backlit LCD)
TRIGGER INPUT connector (DB-25 type)
(Kick, Snare, Tom1, Tom2, Tom3, Hi-Hat, Crash1, Ride, Ride Bell, Hi-Hat Control)
TD-15
TD-11
2 (CRASH2,AUX) (Stereo 1/4-inch phone type)
1 (CRASH2) ( Stereo 1/4-inch phone type)
Extra Trigger
Input jacks
OUTPUT jacks (L/MONO, R) (Stereo 1/4-inch phone type)
PHONES jack (Stereo 1/4-inch phone type)
MIX IN jack (stereo miniature phone type)
MIDI OUT connector
Connectors
USB COMPUTER port
USB MEMORY port
Interface
Hi-Speed USB (USB-MIDI, USB-AUDIO, USB Flash Drive)
1.0 k ohms
Output Impedance
Power Supply
AC adaptor (DC 9 V)
TD-15
TD-11
450 mA
350 mA
Current Draw
Dimensions
Weight
154 (W) x 89 (D) x 225 (H) mm
6-1/16 (W) x 3-9/16 (D) x 8-7/8 (H) inches
TD-15
685 g / 1 lb 9 oz (excluding AC Adaptor)
665 g / 1 lb 8 oz (excluding AC Adaptor)
TD-11
Owner’s Manual,
AC Adaptor, Special Connection Cable,
Wing Bolt (M5 x 10) x 2, Sound Module Mounting Plate,
CD-ROM (Play-along Audio Song/USB Driver)
Accessories
Pads (PD series, PDX series),
Cymbals (CY series),
Kick (KD series),
Hi-Hat (VH-11),
Hi-Hat Control Pedal (FD series),
Stand (MDS series),
Options (sold separately)
Cymbal Mount (MDY series),
Pad Mount (MDH series),
Acoustic Drum Trigger (RT series),
Personal Drum Monitor: PM-10, PM-30,
V-Drums Accessory Package: DAP-3X,
V-Drums Mat (TDM-20/TDM-10),
USB Flash Drive
* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without
prior notice.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
L
S
loading
saving
selecting
SEND
song
M
B
Behavior Modeling Technology . . . . . . . . . .
C
copying
N
naming
SuperNATURAL . . . . . . . . . . . . . . . . . . . . . . . . . .
SWITCH
D
O
deleting
P
pad
T
tempo
playing
previewing
U
E
Q
V
volume
F
R
formatting
restoring
H
I
information
51
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
52
Download from Www.Somanuals.com. All Manuals Search And Download.
When you need repair service, call your nearest Roland Service Center or authorized Roland
distributor in your country as shown below.
Information
TAIWAN
ECUADOR
RUSSIA
OMAN
AFRICA
ROLAND TAIWAN ENTERPRISE
Mas Musika
EUROPE
Roland Music LLC
TALENTZ CENTRE L.L.C.
Malatan House No.1
Al Noor Street, Ruwi
SULTANATE OF OMAN
TEL: 2478 3443
Rumichaca 822 y Zaruma
Guayaquil - ECUADOR
TEL: (593-4) 2302364
Dorozhnaya ul.3,korp.6
117 545 Moscow, RUSSIA
TEL: (495) 981-4967
CO., LTD.
9F-5, No. 112 Chung Shan
North Road Sec. 2 Taipei 104,
TAIWAN R.O.C.
EGYPT
BELGIUM/FRANCE/
HOLLAND/
Al Fanny Trading Oꢀce
9, EBN Hagar Al Askalany Street,
ARD E1 Golf, Heliopolis,
Cairo 11341, EGYPT
EL SALVADOR
SERBIA
TEL: (02) 2561 3339
QATAR
LUXEMBOURG
OMNI MUSIC
Music AP Ltd.
THAILAND
75 Avenida Norte y Final Alameda
Juan Pablo II,
Edi¥cio No.4010 San Salvador,
EL SALVADOR
Sutjeska br. 5 XS - 24413 Palic,
SERBIA
TEL: (024) 539 395
AL-EMADI TRADING &
Roland Central Europe N.V.
Houtstraat 3, B-2260, Oevel
(Westerlo) BELGIUM
Theera Music Co. , Ltd.
100-108 Soi Verng Nakornkasem,
New Road,Sumpantawong,
Bangkok 10100, THAILAND
TEL: (02) 224-8821
CONTRACTING CO.
P.O. Box 62, Doha, QATAR
TEL: 4423-554
TEL: (022)-417-1828
REUNION
TEL: (014) 575811
SLOVAKIA
TEL: 262-0788
MARCEL FO-YAM Sarl
25 Rue Jules Hermann,
Chaudron - BP79 97 491
Ste Clotilde Cedex,
CROATIA
DAN Acoustic s.r.o.
Povazská 18.
SAUDI ARABIA
GUATEMALA
ART-CENTAR
aDawliah Universal Electronics
VIET NAM
Casa Instrumental
Calzada Roosevelt 34-01,zona 11
Ciudad de Guatemala,
GUATEMALA
SK - 940 01 Nové Zámky,
SLOVAKIA
TEL: (035) 6424 330
Degenova 3.
HR - 10000 Zagreb, CROATIA
TEL: (1) 466 8493
APL
VIET THUONG CORPORATION
386 CACH MANG THANG TAM ST.
DIST.3, HO CHI MINH CITY,
VIET NAM
REUNION ISLAND
TEL: (0262) 218-429
Behind Pizza Inn
Prince Turkey Street
aDawliah Building,
PO BOX 2154,
Alkhobar 31952,
SAUDI ARABIA
TEL: (03) 8643601
SPAIN
CZECH REP.
TEL: (502) 599-2888
SOUTH AFRICA
RolandSystems Group EMEA, S.L.
Paseo García Faria, 33-35
08005 Barcelona, SPAIN
TEL: 93 493 91 00
CZECH REPUBLIC DISTRIBUTOR
TEL: (08) 9316540
T.O.M.S. Sound & Music (Pty)Ltd.
2 ASTRON ROAD DENVER
JOHANNESBURG ZA 2195,
SOUTH AFRICA
HONDURAS
s.r.o
Almacen Pajaro Azul S.A. de C.V.
BO.Paz Barahona
Voctárova 247/16
180 00 Praha 8, CZECH REP.
TEL: (2) 830 20270
3 Ave.11 Calle S.O
San Pedro Sula, HONDURAS
TEL: (504) 553-2029
SYRIA
TEL: (011) 417 3400
OCEANIA
SWEDEN
Technical Light & Sound Center
PO Box 13520 Bldg No.49
Khaled Abn Alwalid St.
Damascus, SYRIA
Roland Scandinavia A/S
DENMARK
Paul Bothner(PTY)Ltd.
Royal Cape Park, Unit 24
Londonderry Road, Ottery 7800
Cape Town, SOUTH AFRICA
TEL: (021) 799 4900
SWEDISH SALES OFFICE
Mårbackagatan 31, 4 tr.
SE-123 43 Farsta, SWEDEN
TEL: (0) 8 683 04 30
Roland Scandinavia A/S
Skagerrakvej 7 Postbox 880
DK-2100 Copenhagen,
DENMARK
AUSTRALIA/
MARTINIQUE
NEW ZEALAND
Musique & Son
TEL: (011) 223-5384
Z.I.Les Mangle
Roland Corporation
97232 Le Lamentin,
MARTINIQUE F.W.I.
TEL: 596 596 426860
TURKEY
Australia Pty.,Ltd.
38 Campbell Avenue
Dee Why West. NSW 2099,
AUSTRALIA
TEL: 3916 6200
SWITZERLAND
ZUHAL DIS TICARET A.S.
Galip Dede Cad. No.33
Beyoglu, Istanbul, TURKEY
TEL: (0212) 249 85 10
FINLAND
Roland (Switzerland) AG
Landstrasse 5, Postfach,
CH-4452 Itingen, SWITZERLAND
TEL: (061) 975-9987
Roland Scandinavia As, Filial
ASIA
Gigamusic SARL
Finland
10 Rte De La Folie
97200 Fort De France
MARTINIQUE F.W.I.
TEL: 596 596 715222
For Australia
Vanha Nurmijarventie 62
01670 Vantaa, FINLAND
TEL: (0) 9 68 24 020
U.A.E.
TEL: (02) 9982 8266
For New Zealand
TEL: (09) 3098 715
CHINA
UKRAINE
Zak Electronics & Musical
Roland Shanghai Electronics
EURHYTHMICS Ltd.
P.O.Box: 37-a.
Instruments Co. L.L.C.
Zabeel Road, Al Sherooq Bldg.,
No. 14, Ground Floor, Dubai,
U.A.E.
Co.,Ltd.
GERMANY/AUSTRIA
MEXICO
5F. No.1500 Pingliang Road
Shanghai 200090, CHINA
TEL: (021) 5580-0800
Nedecey Str. 30
UA - 89600 Mukachevo, UKRAINE
TEL: (03131) 414-40
Roland Elektronische
Casa Veerkamp, s.a. de c.v.
Av. Toluca No. 323, Col. Olivar
de los Padres 01780 Mexico D.F.,
MEXICO
Musikinstrumente HmbH.
Oststrasse 96, 22844 Norderstedt,
GERMANY
CENTRAL/LATIN
AMERICA
TEL: (04) 3360715
UNITED KINGDOM
Roland Shanghai Electronics
TEL: (040) 52 60090
Roland (U.K.) Ltd.
TEL: (55) 5668-6699
Co.,Ltd. (BEIJING OFFICE)
3F, Soluxe Fortune Building
63 West Dawang Road, Chaoyang
District, Beijing, CHINA
Atlantic Close, SWANSEA SA7 9FJ,
UNITED KINGDOM
TEL: (01792) 702701
GREECE/CYPRUS
NORTH AMERICA
NICARAGUA
ARGENTINA
STOLLAS S.A.
Bansbach Instrumentos
Instrumentos Musicales S.A.
Av.Santa Fe 2055
Music Sound Light
155, New National Road
Patras 26442, GREECE
TEL: 2610 435400
Musicales Nicaragua
Altamira D'Este Calle Principal
de la Farmacia 5ta.Avenida
1 Cuadra al Lago.#503
Managua, NICARAGUA
TEL: (505) 277-2557
TEL: (010) 5960-2565
CANADA
(1123) Buenos Aires, ARGENTINA
TEL: (011) 4508-2700
Roland Canada Ltd.
HONG KONG
(Head Oꢀce)
MIDDLE EAST
Tom Lee Music
BARBADOS
5480 Parkwood Way Richmond B.
C., V6V 2M4, CANADA
TEL: (604) 270 6626
11/F Silvercord Tower 1
30 Canton Rd
Tsimshatsui, Kowloon,
HONG KONG
HUNGARY
A&B Music Supplies LTD
12 Webster Industrial Park
Wildey, St.Michael, BARBADOS
TEL: (246) 430-1100
Roland East Europe Ltd.
2045. Törökbálint, FSD Park 3. ép.,
HUNGARY
BAHRAIN
PANAMA
Moon Stores
SUPRO MUNDIAL, S.A.
Boulevard Andrews, Albrook,
Panama City, REP. DE PANAMA
TEL: 315-0101
Roland Canada Ltd.
TEL: 852-2737-7688
TEL: (23) 511011
No.1231&1249 Rumaytha
Building Road 3931,
Manama 339, BAHRAIN
TEL: 17 813 942
(Toronto Oꢀce)
170 Admiral Boulevard
Mississauga On L5T 2N6,
CANADA
BRAZIL
IRELAND
Parsons Music Ltd.
Roland Brasil Ltda.
8th Floor, Railway Plaza, 39
Chatham Road South, T.S.T,
Kowloon, HONG KONG
TEL: 852-2333-1863
Roland Ireland
Rua San Jose, 211
E2 Calmount Park, Calmount
Avenue, Dublin 12,
Republic of IRELAND
TEL: (01) 4294444
PARAGUAY
Parque Industrial San Jose
Cotia - Sao Paulo - SP, BRAZIL
TEL: (011) 4615 5666
TEL: (905) 362 9707
IRAN
Distribuidora De Instrumentos
MOCO INC.
U. S. A.
Musicales
Jadeh Makhsous Karaj (K-9),
Nakhe Zarin Ave.
Jalal Street, Reza Alley No.4
Tehran 1389716791, IRAN
TEL: (021)-44545370-5
INDIA
J.E. Olear y ESQ. Manduvira
Asuncion, PARAGUAY
TEL: (595) 21 492147
Roland Corporation U.S.
5100 S. Eastern Avenue
Los Angeles, CA 90040-2938,
U. S. A.
CHILE
ITALY
Rivera Digitec (India) Pvt. Ltd.
411, Nirman Kendra Mahalaxmi
Flats Compound O¢. Dr. Edwin
Moses Road, Mumbai-400011,
INDIA
Comercial Fancy II S.A.
Rut.: 96.919.420-1
Roland Italy S. p. A.
Viale delle Industrie 8,
20020 Arese, Milano, ITALY
TEL: (02) 937-78300
PERU
Nataniel Cox #739, 4th Floor
Santiago - Centro, CHILE
TEL: (02) 688-9540
TEL: (323) 890 3700
Audionet
ISRAEL
Distribuciones Musicales SAC
Juan Fanning 530
Mira©ores
Lima - PERU
TEL: (511) 4461388
TEL: (022) 2493 9051
Halilit P. Greenspoon & Sons
NORWAY
Ltd.
COLOMBIA
INDONESIA
Roland Scandinavia Avd.
8 Retzif Ha'alia Hashnia St.
Tel-Aviv-Yafo ISRAEL
TEL: (03) 6823666
Centro Musical Ltda.
Cra 43 B No 25 A 41 Bododega 9
Medellin, COLOMBIA
PT. Citra Intirama
Kontor Norge
Ruko Garden Shopping Arcade
Unit 8 CR, Podomoro City
Jl.Letjend. S.Parman Kav.28
Jakarta Barat 11470, INDONESIA
TEL: (021) 5698-5519/5520
Lilleakerveien 2 Postboks 95
Lilleaker N-0216 Oslo,
NORWAY
TRINIDAD
TEL: (574) 3812529
JORDAN
AMR Ltd
TEL: 2273 0074
MUSIC HOUSE CO. LTD.
COSTA RICA
Ground Floor
FREDDY FOR MUSIC
P. O. Box 922846
Amman 11192, JORDAN
TEL: (06) 5692696
JUAN Bansbach Instrumentos
Maritime Plaza
Barataria TRINIDAD W.I.
TEL: (868) 638 6385
POLAND
KOREA
Musicales
ROLAND POLSKA SP. Z O.O.
ul. Kty Grodziskie 16B
Ave.1. Calle 11, Apartado 10237,
San Jose, COSTA RICA
TEL: 258-0211
Cosmos Corporation
1461-9, Seocho-Dong,
Seocho Ku, Seoul, KOREA
TEL: (02) 3486-8855
03-289 Warszawa, POLAND
TEL: (022) 678 9512
URUGUAY
KUWAIT
Todo Musica S.A.
Francisco Acuna de Figueroa
1771
EASA HUSAIN AL-YOUSIFI &
CURACAO
PORTUGAL
SONS CO.
MALAYSIA/
SINGAPORE
Zeelandia Music Center Inc.
Orionweg 30
RolandSystems Group EMEA, S.L.
Al-Yousi¥ Service Center
P.O.Box 126 (Safat) 13002,
KUWAIT
C.P.: 11.800
Montevideo, URUGUAY
TEL: (02) 924-2335
Branch Oꢀce Porto
Edifício Tower Plaza
Rotunda Eng. Edgar Cardoso
23, 9ºG
4400-676 Vila Nova de Gaia,
PORTUGAL
Curacao, Netherland Antilles
TEL: (305) 5926866
Roland Asia Paci‹c Sdn. Bhd.
45-1, Block C2, Jalan PJU 1/39,
Dataran Prima, 47301 Petaling
Jaya, Selangor, MALAYSIA
TEL: (03) 7805-3263
TEL: 00 965 802929
DOMINICAN REPUBLIC VENEZUELA
LEBANON
Instrumentos Fernando Giraldez
Calle Proyecto Central No.3
Ens.La Esperilla
Instrumentos Musicales
Allegro,C.A.
Av.las industrias edf.Guitar import
#7 zona Industrial de Turumo
Caracas, VENEZUELA
Chahine S.A.L.
TEL: (+351) 22 608 00 60
George Zeidan St., Chahine Bldg.,
Achra¥eh, P.O.Box: 16-5857
Beirut, LEBANON
PHILIPPINES
Santo Domingo,
DOMINICAN REPUBLIC
TEL: (809) 683 0305
ROMANIA
G.A. Yupangco & Co. Inc.
339 Gil J. Puyat Avenue
Makati, Metro Manila 1200,
PHILIPPINES
FBS LINES
TEL: (01) 20-1441
TEL: (212) 244-1122
Piata Libertatii 1,
535500 Gheorgheni, ROMANIA
TEL: (266) 364 609
TEL: (02) 899 9801
As of Feb. 1, 2011 (ROLAND)
53
Download from Www.Somanuals.com. All Manuals Search And Download.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
For the USA
DECLARATION OF CONFORMITY
Compliance Information Statement
Model Name :
Type of Equipment :
Responsible Party :
Address :
Telephone :
55
Download from Www.Somanuals.com. All Manuals Search And Download.
*
5
1
0
0
0
2
8
3
4
9
-
0
2
*
Download from Www.Somanuals.com. All Manuals Search And Download.
|