DAB/FM RDS Digital Sound System
with dock for iPod
Please read this manual before use
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls (Top)
10
iPod Dock
9
8
7
6
11
12
5
4
13
14
15
3
2
1
1. Snooze button
6. Preset button
11. Rewind button
2. Volume Up / Down buttons
3. On / Standby button
4. Sleep button
7. Info button
12. Tuning Up button
8. Menu button
13. Fast-forward button
14. Select / Play / Pause button
15. Tuning Down button
9. Mode button (DAB,FM,iPod or Aux in)
10. Cover for iPod dock connector
5. Alarm button
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
2
020 8758 0338 (Mon-Fri)
Controls (front)
16
16. LCD display
17. Infra-red sensor
18. Speakers x 2
17
18
Controls (rear)
19
19. Telescopic aerial
20. DC in socket
21. Line output socket
22. Headphone socket
23. Auxiliary input socket
24. USB socket (for software
upgrades)
24
23 22 21
20
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Controls (remote control)
4
3
2
1
1. On / Standby button
2. iPod button
3. FM button
4. DAB button
5. Mute button
5
6
6. Auxiliary in button
7. Tuning Up button
8. Menu button
21
20
19
18
7
8
9
9. Play / Pause button
10. Rewind button
11. Tuning Down button
12. Sleep button
10
17
13. Light button
16
15
14
11
12
13
14. Snooze button
15. Alarm button
16. Equaliser (EQ) button
17. Info button
18. Fast-forward button
19. Preset button
20. Select button
21. Volume Up / Down buttons
Note: For the sake of clarity, the instructions for the use of the controls throughout this instruction manual show the buttons on the remote control.
The buttons on the sound system can be used if you prefer. However the mute, display backlight dimmer and some iPod control functions are only
available when using the remote control.
Please note: The mode button on the sound system will access the DAB, FM, iPod and Auxiliary input modes.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
4
020 8758 0338 (Mon-Fri)
Remote handset battery replacement
1. With the aid of the end of a paper clip slide the catch to the right hand
side.
2. Remove the battery holder by pushing the holder in the direction
shown.
3. Remove the battery from holder.
4. Replace the battery (CR2032 or equivalent) ensuring that the positive
side of the battery faces you with the holder positioned as shown.
5. Replace the battery holder.
If the remote is not to be used for an extended period of time it is
recommended that the battery is removed.
1
IMPORTANT: The battery should not be exposed to excessive heat
such as sunshine, fire or the like. After use, disposable batteries should
if possible be taken to a suitable recycling centre. On no account should
batteries be disposed of by incineration.
2
4
3
5
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Using the sound system for the first time
1. Place your sound system on a flat surface.
2. Fully extend the telescopic aerial. The aerial should be fully extended
and positioned vertically for optimum reception.
3. Insert the adaptor plug into the DC socket located on the rear of your
sound system. Plug the adaptor into a standard 13 amp mains socket
outlet. The display will show "ROBERTS" for a few seconds and then
the display will then show "SETCLOCK". After a short time the current
time will appear on the display.
4. If no stations are found, "NO CLOCK" will be displayed. It may be
necessary to relocate your sound system to a position giving better
reception.Youshouldthencarryoutascantofindstationsasdescribedon
page 11.
IMPORTANT: The mains adaptor is used as the means of connecting the
sound system to the mains supply. The mains socket used for the sound
system must remain accessible during normal use. In order to disconnect
the sound system from the mains completely, the mains adaptor should
be removed from the mains socket outlet completely.
Characters appearing on the LCD display indicate that the sound system
is connected to and powered from the mains supply.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
6
020 8758 0338 (Mon-Fri)
Operating your sound system
1. Press the On / Standby button to switch on your sound system.
When first switched on, the sound system will be in DAB mode. After
each use the sound system will remember the mode used and then
switch on in that mode the next time that it is used.
1
2. If the sound system has been used before, the last used station will
be selected.
3. If this is the first time that the sound system has been used a quick
scan of the Band III DAB channels will be carried out. The first station
in the list of stations found during scanning will be played. The display
will show the station name.
4. During the scanning process the display will show progress of the
station search for example ">>>> 18". The number on the right of the
display is the number of stations that have been found. When the scan
is completed the first station (in numeric-alpha order 0....9, A....Z will
be selected.
5. If no signals are found then "OFF AIR" will be displayed and it may be
necessary to relocate your sound system to a position giving better
reception.Youshouldthencarryoutascantofindstationsasdescribed
on page 11.
•
Your sound system has a indicator
on the display to indicate the
strength of the DAB radio signal being received.
Note: When first switched on, the radio will set the volume to a moderately
high level, in case the broadcast is very quiet. After you have set the
volume using the Volume Up or Down buttons, the radio will remember
the setting that you have applied for the next time that it is used.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Selecting a station - DAB
1. Press the On / Standby button to switch on your sound system. The
display will show "TUNING" for a few seconds.
2
2. Press the DAB button to select DAB mode. The display will show the
name of the radio station currently selected.
3. Press the Tuning Up or Down buttons to step through the list of
available stations.
3
3
4. When the desired station name appears on the display, press the
Select button to select the station. The display will show "TUNING"
while your sound system finds the new station.
5. Adjust the Volume to the required setting.
Note: If after selecting a station the display shows "OFF AIR" it may
be necessary to relocate your sound system to a position giving better
reception.
4
5
5
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
8
020 8758 0338 (Mon-Fri)
Secondary services - DAB
1. Certainradiostationshaveoneormoresecondaryservicesassociated
with them. If a station has a secondary service associated with it then
the secondary service will then appear immediately after the primary
service as you press the Tuning Up button.
1
2. Totunetothesecondaryservice,pressandreleasetheSelectbutton.
Mostsecondaryservicesdonotbroadcastcontinuallyandiftheselected
service is not available, the radio will re-tune to the associated primary
service.
2
Display modes - DAB
Your radio has a range of display options when in DAB mode:-
a
b
c
1. Press the Info button to cycle through the various options.
1
a. Station name
Displays the station name being
listened to.
b. Scrolling text
Displays scrolling text messages such
as artist/track name, phone in number,
etc.
c. Programme type
Displays the type of station being
listened to e.g. Pop, Classic, News, etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
d. Multiplex Name
Displays the name of the DAB multiplex
to which the current station belongs.
d
e
f
e. Time
Displays the current time (24 hour clock).
Displays the current date.
f. Date
g. Frequency & channel
Displaysfrequencyandchannelnumber
for the currently tuned DAB station.
g
h
i
h. Bit rate
Displays the digital audio bit rate for the
currently tuned DAB station.
i. Signal error
Displays the bit error rate for the
currently tuned DAB station.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
10
020 8758 0338 (Mon-Fri)
Finding new stations - DAB
As time passes new stations may become available. To find new stations
proceed as follows.
1
1. Press and release the Menu button. "EQ" shows on the display.
2. Press the Tuning Up or Down buttons until the display shows
"SCAN".
3. Press and release the Select button. Your radio will perform a scan
of the Band III DAB channels. As new stations are found, the station
counter on the right-hand side of the display will increase and stations
will be added to the list.
2
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Manual tuning - DAB
Manual tuning allows you to tune your sound system to a particular
DAB frequency in Band III. Any new stations found will be added to the
station list. This function can also be used to assist the positioning of the
aerial or the sound system to optimise reception for a specific channel or
frequency. Note that UK DAB stations are located in the range of channels
11B to 12D.
1
1. Press and release the Menu button "EQ" will show on the display.
2. Press the Tuning Up or Down buttons until the display shows
"MANUAL". Press and release the Select button to enter the manual
tuning mode.
2,3
2,3
3. Press the Tuning Up or Down buttons to select the desired DAB
channel. Press and release the Select button to tune to the chosen
frequency.
4. If a signal is present, this will be indicated on a signal strength display.
The minimum signal marker ( ) shows the minimum signal strength
needed for good DAB reception. The signal indicator chevrons go
up or down showing the changing signal strength as you adjust the
telescopic aerial or your sound system position. Press and release
the Select button again to return to the normal DAB tuning mode.
2-4
1,2
Signal strength display - DAB
1. Press and release the Select button to show the signal strength
display. The minimum signal marker ( ) shows the minimum signal
strengthneededforgoodDABreception.Thesignalindicatorchevrons
increase or decrease showing the changing signal strength as you
adjust the telescopic aerial or your sound system position.
2. Press and release the Select button to return to the normal radio
display.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
12
020 8758 0338 (Mon-Fri)
Dynamic Range Control (DRC) - DAB
Dynamic range control (also known as DRC) can make quieter sounds
easier to hear when your sound system is used in a noisy environment.
2
3
There are three levels of compression:
DRC 0 No compression applied. (default)
DRC 1 Maximum compression applied.
DRC 1/2 Medium compression applied.
1. Press the On / Standby button to switch on your sound system.
2. Press the DAB button to select the DAB band.
3. Press and release the Menu button the display will show “EQ.”
4,5
4,5
4. Press the Tuning Up or Down buttons until "DRC VAL" appears on
the display. Then press the Select button. The display will show the
current DRC value.
5. PresstheTuningUporDownbuttonstoselecttherequiredDRCsetting
(default is 0) .
6. PressandreleasetheSelectbuttontoconfirmthesetting.Thedisplay
will return to the normal radio display.
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the sound
system will have no effect.
4,6
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Operating your sound system - FM auto-tune
1. Fully extend the telescopic aerial. The aerial should be fully extended
and positioned vertically for optimum reception.
2
3
2. Press the On / Standby button to switch on your sound system.
3. Press the FM button to select the FM band.
4. Press and hold down the Tuning Up button for 2 - 3 seconds to cause
your radio to search from low frequency to high frequency and to stop
automatically when it finds a station of sufficient strength.
5. After a few seconds the display will update. The display will show the
frequency of the signal found. If the signal is strong enough and there
is RDS data present then the radio will display the station name.
4,6
6. To find other stations press and hold the Tuning Up button as
before.
7. Press and hold down the Tuning Down button for 2 - 3 seconds to
cause your radio to search from high frequency to low frequency and
to stop automatically when it finds a station of sufficient strength.
7
8. When the end of the waveband is reached your radio will recommence
tuning from the opposite end of the waveband.
Note:
If you find that FM reception is poor, try repositioning the Telescopic aerial
fully extend and position vertically for optimum reception. If you find that
an FM broadcast has a lot of background hiss, this may often be reduced
by setting the radio into Mono reception mode for the current FM station.
Please refer to the section "Stereo / Mono setting - FM" on page 36 for
further details.
9. Adjust the Volume to the required setting.
10. To switch off your sound system press the On / Standby button.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Manual tuning - FM
1. Fully extend the telescopic aerial. The aerial should be fully extended
and positioned vertically for optimum reception.
2,7
2. Press the On / Standby button to switch on your sound system.
3. Press the FM button to select the FM band.
4. Repeatedly press and release the Tuning Up or Down buttons to
tune to a station. The frequency will change in steps of 50kHz.
3
If the radio is tuned to a station of sufficient signal strength with RDS
information present, then the display may change to show the station
name.
5. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
4
6. Adjust the Volume to the required setting.
7. To switch off your sound system press the On / Standby button.
4
Note:
If you find that FM reception is poor, try repositioning the Telescopic aerial
fully extend and position vertically for optimum reception.
If you find that an FM broadcast has a lot of background hiss, this may
often be reduced by setting the radio into Mono reception mode for the
current FM station. Please refer to the section "Stereo / Mono setting - FM"
on page 36 for further details.
6
6
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Display modes - FM
Your sound system has a range of display options for FM mode:-
The Radio Data System (RDS) is a system in which inaudible digital
information is transmitted in addition to the normal FM radio programme.
RDS offers several useful features. The following are available on your
sound system.
a
b
c
1
1. Press the Info button to cycle through the various modes.
a. Station name
b. Scrolling text
Displaysthenameoftheradiostationbeing
listened to.
Displays scrolling text messages such
as artist/track name, phone in number,
etc.
c. Programme type
d. Time
Displaystypeofstationbeinglistenedto
e.g. Pop, Classic, News, etc.
d
e
f
Displays the current time
(24 hour clock format)
e. Date
Displays current date.
f. Frequency
Displays the frequency of the station being
listened to.
Note: Your radio will display "NO TEXT" if there is no scrolling text and
"NO PTY" if there is no programme type information.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
16
020 8758 0338 (Mon-Fri)
Presetting stations
You may store your preferred DAB and FM radio stations to the preset
station memories. There are 20 memory presets in your sound system, 10
for DAB and 10 for FM. Presets are remembered by your sound system
in the event of a power failure.
1
The procedure for setting presets and using them to tune stations is the
same for FM and DAB modes, and is described below.
1. Press the On / Standby button to switch on the sound system.
2. Press the DAB or FM button to select the desired waveband.
3. Tune to the required station as previously described.
2
4. Press and release the Preset button. The display will show, for
4,6
example, "Empty 1" if no station has been stored to that preset.
5. Use the Tuning Up or Down buttons to select the desired preset
station number under which you wish to store the station.
6. Press and hold down the Preset button until the display shows, for
example, "P1 SAVED". The station will be stored under the chosen
preset. Repeat this procedure for the remaining presets.
5
7. Stationswhich havebeenstoredinpresetmemoriesmaybeoverwritten
by following the above procedure.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Recalling a preset station
1. Press the On / Standby button to switch on the sound system.
2. Press the DAB or FM button to select the desired waveband.
2
3. Press and release the Preset button. The display will show, for
example, "Empty 1" if no station has been stored to that preset. If a
preset has been stored, then the display will show either the station
name (for DAB stations) or the frequency (for FM stations).
3,5
4. Press the Tuning Up or Down buttons to select the desired preset
station.
5. Press the Preset button. Your radio will tune to the chosen preset
station stored in the preset memory.
4
4
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
18
020 8758 0338 (Mon-Fri)
iPod docking
Your sound system has an iPod dock facility which allows you to play
digital audio files and video soundtracks held on your iPod using the sound
system's loudspeakers.
Your sound system uses the iPod Universal Dock connector developed for
use with most iPods. Recent models of iPod are supplied with Universal
Dock Adapter inserts which ensure correct alignment of the iPod with the
electrical connector. Earlier models of iPod were not supplied with the
necessary inserts and so your Sound 66 is supplied with inserts type 1-7.
Should you require an insert to use your iPod with your sound system,
then please contact an iPod accessories supplier.
Dock connector for iPod
Docking recess
Important: To avoid possible damage to your iPod, do not use your
iPod with the product without the correct adapter fitted to the sound
system.
Docking your iPod
1. Ensure that the sound system is in standby. Carefully remove the iPod
dock connector cover from the top of your sound system.
2. Place the iPod docking Adapter (see above) into the iPod docking
recess so that it is securely seated.
3. Carefully place your iPod onto the Universal Dock connector.
4
5
4. Press the On / Standby button to switch on your sound system.
5. To select the iPod mode press the iPod button until "IPOD" shows
on the display. If it was previously playing, your iPod will switch on
and continue playing from where it was previously stopped.
Note: Your sound system is able to recharge your iPod's internal battery.
Recharging does not take place while your sound system is using DAB or
FM radio. Your iPod will use its backlight settings as configured. If these
need changing, use the Settings menu on your iPod.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Navigating your iPod
Please note: Some of the iPod control functions are only available using
the remote control or via the iPod's own controls. Not all iPods support
remote menu navigation (for example, iPod nano 6th generation).
1
1. Use the Menu button to navigate to higher level menus on your iPod.
2. Use the Tuning Up or Down buttons as required to move up or down
a menu screen on your iPod.
2,3
3. Press the Select button to choose the highlighted on screen menu
item. If this item is a lower level menu item, you may then navigate
further using the Tuning Up or Down and Select buttons.
3
2,3
Playing a file on your iPod
1. When you have found the required item use the Play / Pause button
on the sound system to start the iPod playing. If you have just docked
your iPod, you may need to press the button more than once to ensure
that the sound system is in communication with your iPod.
2. Adjust the volume to the required setting using the Volume Up and
1-4
Down buttons on your sound system.
3. TopauseplaybackpressthePlay/Pausebutton.Toresumeplayback
press the Play / Pause button again.
4. iPods do not have a Stop button (they use the Pause function). To play
analternativeselection,usetheiPodmenustomaketheselectionusing
the Play / Pause button to stop playing the current item if needed.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
20
020 8758 0338 (Mon-Fri)
Search function
1. While the iPod is playing, press and hold the Fast-forward or Rewind
buttons to move through the current file or track. Release the button
when the desired point in the file or track is reached.
1,2
1,2
2. Press and release either the Fast-forward or Rewind buttons to start
playing the next or previous file or track.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Setting alarm times
Your sound system has two alarms which can be set to wake you to DAB,
FM radio, iPod item or beep type alarm. Each alarm can be set to sound
once, daily, on weekdays or at weekends. The alarms may be set while
the unit is in Standby mode or while playing.
1
Note: If no buttons are pressed for several seconds, your sound system
will exit the alarm setup.
1. If required press the On / Standby button to switch on the sound
system.
2
2. Press and release the Alarm button "SET ALM" will appear on the
display. Press the Select button to enter alarm setup.
3. "Alarm 1" flashes on the display.
2,5,6
4. Press the Tuning Up or Down buttons to select the desired alarm
number, 1 or 2.
5. Press the Select button to enter the setting for the chosen alarm.
Press the Tuning Up or Down buttons to select ON or OFF. If OFF
is selected any current setting for that alarm will be cancelled.
4-7
6. Press the Select button to cause the alarm hour digits to flash on the
display.
4-7
7. Press the Tuning Up or Down buttons to choose the desired alarm
hour.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
22
020 8758 0338 (Mon-Fri)
8. Press the Select button to enter the hour setting. The alarm minute
digits will flash on the display.
9. Press the Tuning Up or Down buttons to choose the desired alarm
8,10
minute.
10. Press the Select button to enter the minutes setting. The alarm day
option will flash on the display.
11. Press the Tuning Up or Down buttons to choose the desired alarm
9,11
day option:
Once
- Will sound at one time only
- Will sound everyday
Daily
Weekdays
Weekends
- Will sound only on weekdays
- Will sound only on weekends
9,11
•
Ifsettingthealarmtoonceonly,continuewithstep12below.Otherwise
skip to step 18 on the following page.
12. Press the Select button to enter the setting. The alarm year will flash
12,14
on the display.
13. Press the Tuning Up or Down buttons to choose the alarm year.
14. Press the Select button to enter the alarm year setting. The alarm
13,15
13,15
month will flash on the display.
15. Press the Tuning Up or Down buttons to choose the alarm month.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
16. Press the Select button to enter the alarm month setting. The alarm
day will flash on the display.
17. Press the Tuning Up or Down buttons to choose the alarm day.
16,18
18. Press the Select button to enter the setting. The alarm source option
will flash on the display.
19. Repeatedly press the Tuning Up or Down buttons to choose the
desired alarm source (DAB, FM, iPod, BUZ).
17,19
20. Press the Select button to confirm the alarm settings and return to
normal radio mode.
Radio, Buzzer and iPod alarms are indicated in the display by the
symbol and the corresponding alarm number.
17,19
When your sound system is set to wake by the radio alarm, your sound
system will switch to the last used DAB or FM radio station.
When the alarm activates the alarm will start softly and gradually increase
in level.
For DAB, FM or iPod alarm you may adjust the volume while the alarm
is active. Without intervention the volume will gradually increase up to a
mid level.
20
Important: If using your iPod as the source for the alarm, then be sure to
dock your iPod.After docking, briefly switch on the sound system using the
On / Standby button and then select iPod mode using the iPod button.
Next, press the Play / Pause button two or three times to ensure that
the sound system and your iPod are communicating correctly. Failure to
verify this may result in the alarm not being audible if the sound system
is unable to activate your iPod when needed. When ready, put the sound
system back into standby mode using the On / Standby button.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
24
020 8758 0338 (Mon-Fri)
To view the alarm settings
1. Press the Alarm button "SET ALM" will show on the display. Press
the Select button to enter the alarm setup.
1
2. Press the Tuning Up or Down buttons to view alarms 1 or 2.
3. Press the Select button to cycle through each of the settings for the
chosen alarm.
You may use theTuning Up and Down buttons to modify any particular
setting if desired, using the Select button to enter the modification.
1,3
2,3
2,3
Cancelling alarms
1. While an alarm is sounding it can be cancelled by pressing the
On / Standby button.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Snooze function
1. When the radio, iPod or buzzer alarm sounds, pressing the Snooze
button will silence the alarm for the selected number of minutes.
The Snooze duration can be adjusted between 5 and 20 minutes in
5 minute increments. The default setting is 5 minutes.
1
When the Snooze button has been pressed during an alarm, the
Snooze symbol
will flash. This sequence can be repeated during
the 60 minute alarm period.
2. To cancel the Snooze function, press the On / Standby button.
To set the snooze time
2
1. Press the On / Standby button to switch on the sound system. If
necessary press and release the DAB or FM button to put the sound
system into DAB or FM mode.
2. To set the snooze to the desired snooze time, press and release the
Menu button.
3-5
3. Press the Tuning Up or Down buttons until "CLOCK" appears on
the display. Then press the Select button.
3-5
4. Press the Tuning Up or Down buttons until "SNOOZE" appears on
the display. Press and release the Select button.
5. Press the Tuning Up or Down buttons to choose the desired snooze
setting from between 5, 10, 15 and 20 minutes.
3-6
6. Press the Select button to enter the desired snooze duration. The
sound system will exit the menu options and return to the normal radio
display.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
26
020 8758 0338 (Mon-Fri)
Sleep function
Your sound system can be set to turn off after a preset time has elapsed.
The sleep setting can be adjusted between 5 and 90 minutes in 5 minute
increments. Ensure your sound system is switched On.
1,2,5
1. When using your sound system, press the Sleep button. "SLEEP"
appears on the display.
2. Repeatedly press the Sleep button to select desired sleep time. The
sleep setting will increase in 5 minute increments from 5 minutes up
to 90 minutes. A further press will cause the sleep timer to be set to
OFF which will cancel the sleep function.
3
3. Press the Select button. The display will show the sleep timer setting
then exit the sleep options. The sleep symbol
display.
will show on the
4. Your sound system will switch off after the preset sleep time has
elapsed.
5
5. To cancel the sleep timer and switch off your sound system before the
chosen sleep time has elapsed, press the On / Standby button.
To cancel the sleep timer without switching off your sound system,
repeatedly press the Sleep button until "OFF" is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Setting the clock manually
Normally your sound system will set its clock automatically using the DAB
radio signal. If no DAB signal is available and you need to set the time
manually, please follow the procedure shown below.
2
1. Press the On / Standby button to switch on the sound system. If
necessary press and release the DAB or FM button to put the sound
system into DAB or FM mode.
2. To set the clock time, press the Menu button to enter the setup
menu.
3-8
3. Press the Tuning Up or Down buttons until "CLOCK" appears on
the display. Press and release the Select button.
3-8
4. Press the Tuning Up or Down buttons until "MANU CLK" appears
on the display.
5. Press and release the Select button to enter the manual setting
procedure. The hour digits will then flash on the display.
3-7
6. Press the Tuning Up or Down buttons to set the desired hour.
7. Press and release the Select button to enter the hour setting.
8. The minute digits will then flash on the display. Press the Tuning Up
or Down buttons to set the desired minute.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
28
020 8758 0338 (Mon-Fri)
9. Press the Select button to enter the minutes setting. The year will
then flash on the display.
10. Press the Tuning Up or Down buttons to change the year as
needed.
9-15
11. Press the Select button to enter the year setting. The month will then
flash on the display.
12. Press the Tuning Up or Down buttons to select the current month.
10-14
13. Press the Select button to enter the month setting. The day in the
month will then flash on the display.
14. Press the Tuning Up or Down buttons to select the current day.
10-14
15. Press the Select button to confirm the time setting and return to the
normal radio display.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
To return to auto clock set mode
1. Press the On / Standby button to switch on the sound system. If
necessary press and release the DAB button to put the sound system
into DAB mode.
2
2. Press and release the Menu button to enter the setup menu.
3. Press the Tuning Up or Down buttons until "CLOCK" appears on
the display. Press and release the Select button.
3,4
3,4
4. Press the Tuning Up or Down buttons until "AUTO CLK" appears
on the display. Press and release the Select button.
5. The sound system will immediately set its time according to the
information received with the DAB broadcast. The sound system will
return to normal radio operation with the time currently displayed.
Note: If you select "AUTO CLK" the current time received will be displayed.
If no DAB signal is found, "NO CLOCK" will be displayed. You should
then either position the sound system or its aerial so that a signal can be
received, or revert to manual clock mode (see page 28).
3-4
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
30
020 8758 0338 (Mon-Fri)
Equalizer function using remote control
The sound on your sound system can be adjusted to suit your personal
taste for the material that you are listening to. The sound system has six
preset equalizer modes. Alternatively, you may set the treble and bass
levels to your own preferences.
1
1. Press the Equalizer button to cycle through the various modes.
a. Flat - no tone modification is applied
b. Jazz
c. Rock
d. Classic
e. Pop
f. News
g. Treble - tone setting may be adjusted
h. Bass - tone setting may be adjusted
Treble control
2. Press the Equalizer button to cycle through the modes until "TREB"
appears on the display. The current treble setting will be shown on
the display.
2,4
3. To adjust the treble setting press and release the Rewind or Fast-
forward buttons until the desired level is displayed.
4. If you wish also to adjust the bass, then press the Equalizer button
once more as described in step 5. Alternatively press the Select
button to revert to the play mode display.
4
3
3
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Bass control
5. Press the Equalizer button to cycle through the modes until "BASS"
appears on the text display. The current bass setting will be shown
on the display.
5
6. To adjust the bass setting press and release the Rewind or Fast-
forward buttons until the desired level is displayed.
7. Press the Select button to revert to the play mode display.
6
6
•
To quickly cancel the effect of the treble or bass settings press the
Equaliser button until "Flat" appears on the display. The treble and
bass settings will be remembered for the next time that you wish to
adjust them.
7
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
32
020 8758 0338 (Mon-Fri)
Equalizer function using the sound system
1. Press the On / Standby button to switch on your sound system.
2. Press and release the Menu button "EQ" will show on the display.
2
3. Press and release the Select button to enter the EQ setup menu.
4. Press the Tuning Up or Down buttons to cycle through the
various modes.
a. Flat - no tone modification is applied
3,7
b. Jazz
c. Rock
d. Classic
e. Pop
4,5
f. News
g. Treble - tone setting may be adjusted
h. Bass - tone setting may be adjusted
4,5
Treble control
5. Press the Tuning Up or Down buttons to cycle through the modes
until "TREB" appears on the display. The current treble setting will be
shown on the display.
6. To adjust the treble setting press and release the Rewind or Fast-
forward buttons until the desired level is displayed.
7
6
6
7. If you wish also to adjust the bass, then press the Tuning Up or Down
buttons once more as described in step 8. Alternatively press the
Select button to revert to the play mode display.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Bass control
8. Press the Tuning Up or Down buttons to cycle through the modes
until "BASS" appears on the display. The current bass setting will be
shown on the display.
8
8
9. To adjust the bass setting press and release the Rewind or Fast-
forward buttons until the desired level is displayed.
10. Press the Select button to revert to the play mode display.
•
To quickly cancel the effect of the treble or bass settings press the
Tuning Up or Down buttons until "Flat" appears on the display. The
treble and bass settings will be remembered for the next time that you
wish to adjust them.
9
10
9
Mute function (Remote control only)
Pressing the Mute button will mute the output from the loudspeakers.
1. Press the Mute button to mute the sound output. The speaker volume
1,2
symbol on the display will disappear.
2. PresstheMutebuttonagainoroneoftheVolumebuttonstoun-mute
the sound output.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
34
020 8758 0338 (Mon-Fri)
Clock display
1. Whenyoursoundsystemisinstandbymodethetimewillbedisplayed.
The time is always shown using a 24 hour clock format.
Display backlight dimmer (Remote control only)
1. In order to adapt the intensity of the display to suit the ambient room
lighting, Press the Light button (on the remote control) to select the
dimmer brightness from Low, Mid, High or OFF settings.
1
Software version
The software display cannot be altered and is just for your reference.
Ensure your sound system is switched on and in DAB or FM mode.
1,4
1. Press and release the Menu button to enter the setup menu.
2. Press the Tuning Up or Down buttons until "VERSION" appears on
the display.
2
2
3. Press the Select button to view software information.
4. Press the Menu button to return to normal radio display mode.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Stereo / Mono setting - FM
Your sound system will play stereo FM broadcasts in stereo provided that
the received signal is of adequate strength. However, as a stereo signal
becomes weaker the audio signal will become poorer. It may be preferable
to force the sound system to play the station in mono in order to reduce
the level of backgound hiss.
1. Press the On / Standby button to switch on your sound system.
2. Tune to the required FM radio station as previously described (see
pages 14, 15).
3. Press and release the Select button until the display shows “MONO”.
While this setting is engaged, the radio will play the current station in
mono whether listening via headphones or the loudspeaker.
3,4
TheMonooverrideisatemporarysettingandisappliedtothecurrently
tuned station only. It is cancelled automatically by tuning to another
radio station.
4. If you wish to cancel the Mono override while listening to the currently
tuned radio station, press and release the Select button until the
display shows “AUTO”. The radio will then play the current station in
stereo if the signal is sufficiently strong.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
36
020 8758 0338 (Mon-Fri)
System reset
Ifyoursoundsystemfailstooperatecorrectly, orsomedigitsonthedisplay
are missing or incomplete carry out the following procedure.
2
1. PresstheOn/Standbybuttontoswitchonthesoundsystem. Ensure
your Sound 66 is in DAB or FM mode.
2. Press and release the Menu button.
3. Press and release the Tuning Up or Down buttons until "FACTORY"
appearsonthedisplay.PressandreleasetheSelectbuttonsothatthe
display shows "RESET" and then press the Select button again.
3
3
4. Afullresetwillbeperformed.Thestationlistandpresetswillbeerased.
Alarms will be cancelled and snooze and sleep timer settings will be
set to their default values. The display will show "ROBERTS" and after
a few seconds a station scan search will be performed automatically.
The display will show progress of the station search, for example
">>>> 18". The number on the right of the display is the number of
stations that have been found.
3
In case of malfunction due to electrostatic discharge, reset the product
as above to resume normal operation. If you are not able to perform the
reset operation as above, removal and reconnection of the power supply
may be required.
If a problem persists our technical staff would be pleased to offer any as-
sistance on operating the sound system. Our technical helpline number
is 020 8758 0338.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Headphone socket
A 3.5mm stereo Headphone Socket located on the rear of your sound
systemisprovidedforusewitheitherheadphonesoranearpiece.Inserting
a plug automatically mutes the internal loudspeaker.
IMPORTANT:Excessivesoundpressurefromearphonesandheadphones
can cause hearing loss.
Auxiliary Input (Line in) socket
A 3.5mm stereo Auxiliary Input socket is provided on the rear of your
sound system to permit an audio signal to be fed into the unit from an
external audio device such as iPod, MP3 or CD player.
1. Connect a stereo or mono audio source (for example, iPod, MP3 or
CD player) to the Auxiliary Input socket (marked "Aux In").
1
2. Press the Aux button until "AUX IN" is selected on the display.
3. Adjust the Volume control on your iPod, MP3 or CD player to ensure
an adequate signal and then adjust the volume on the sound system
for comfortable listening.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
38
020 8758 0338 (Mon-Fri)
Line out socket (3.5mm Jack)
A 3.5mm Line Out socket located on the rear of your sound system is
provided for connecting the audio signal to an external amplifier. Inserting
an audio cable into this socket will not mute the internal loudspeaker. Set
the volume control on the sound system to minimum if desired.
USB socket for software upgrade
Software updates for your Sound 66 may be available in the future. If you register
address you will receive notification of software updates.
As software updates become available software and information on how to
update your sound system can be found at www.robertsradio.co.uk/support
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Cautions
Do not allow this sound system to be exposed to water, steam or sand. Do
not leave your sound system where excessive heat could cause damage
such as in a parked car where the heat from the sun can build up even
thoughtheoutsidetemperaturemaynotseemtoohigh. Itisrecommended
that the DAB band be used wherever possible as better results in terms
of quality and freedom from interference will usually be obtained than on
the the FM band.
•
•
•
Your sound system should not be exposed to dripping or splashing
and that no objects filled with liquids, such as vases, shall be placed
on the sound system.
It is recommended to operate the product such that there is a minimum
distance (10cm recommended) to adjacent objects in order to ensure
good ventilation.
The ventilation of the product should not be restricted by covering it or
its ventilation openings with items such as newspapers, tablecloths,
curtains etc.
•
The name plate is located on the rear of the unit.
•
•
No naked flame sources such as lighted candles should be placed on
the product.
It is recommended to avoid using or storing the product at extremes
of temperature.Avoid leaving the unit in cars, on window sills, in direct
sunlight etc.
Specifications
Circuit Features
Power Requirements
Output Power
2 x 2.5 Watts
Mains
AC 100
240V 50/60Hz (Adaptor)
Headphone socket
Auxiliary Input socket
Line Output socket
3.5mm dia
3.5mm dia
3.5mm dia
Frequency Coverage
FM
DAB
87.5-108MHz
174.928 - 239.200MHz
Aerial System
FM
DAB
Telescopic aerial
Telescopic aerial
The Company reserves the right to amend the specification without notice.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
40
020 8758 0338 (Mon-Fri)
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
"Made for iPod" means that an electrical accessory has been designed to connect specifically to
iPod and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of the device or its
compliance with safety and regulatory standards.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
Guarantee
This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component
breakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or replaced free
of charge.
The guarantee does not cover:
1. Damage resulting from incorrect use.
2. Consequential damage.
3. Receivers with removed or defaced serial numbers.
N.B. Damaged or broken telescopic aerials will not be replaced under guarantee.
Procedure:
Any claim under this guarantee should be made through the dealer from whom the instrument was purchased. It is likely that your Roberts' dealer
will be able to attend to any defect quickly and efficiently but should it be necessary the dealer will return the instrument to the Company’s service
department for attention. In the event that it is not possible to return the instrument to the Roberts' dealer from whom it was purchased, please contact
Roberts Radio Technical Services at the address shown overleaf.
These statements do not affect the statutory rights of a consumer.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
42
020 8758 0338 (Mon-Fri)
ROBERTS RADIO TECHNICAL SERVICES
97-99 Worton Road
Isleworth
Middlesex
TW7 6EG
Technical Helpline :- 020 8758 0338 (Mon-Fri during office hours)
© 2010 Roberts Radio Limited
Issue 2
Download from Www.Somanuals.com. All Manuals Search And Download.
|