RD-20
FM RDS/DAB digital radio
Please read this manual before use
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
(Top)
1
2
3
4
5
6
7
8
9
10
11
18
17
16
15
14
13
12
1. Telescopic aerial (on rear)
2. On/Off button
7. Line out socket (on rear)
8. FM/DAB button
9. +5 button
13. Tuning up button
14. Tuning down button
15. Liquid crystal display (LCD)
16. Treble control
3. Mains LED indicator
4. Station presets
10. Info button
5. Headphone socket (on rear)
6. Auto Tune button
11. Select button
12. Tuning control
17. Bass control
18. Volume control
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
2
020 8758 0338 (Mon-Fri)
Battery operation
1. Remove the Battery cover on the rear of the unit by pushing the
battery door in and downwards. .
2. Insert six LR20 (D size) batteries into the spaces in the compartment.
Take care to ensure all batteries are inserted with the correct polarity
as shown inside the battery compartment. Replace the battery cover.
3. Reduced power, distortion and a ‘stuttering’ sound are all signs that
the batteries may need replacing.
4. If the radio is not to be used for any extended period of time it is
recommended that the batteries are removed from the radio.
We would recommend for economy that the RD-20 is used on the
mains whenever possible with battery operation for occasional or
stand-by use only.
IMPORTANT: The batteries should not be exposed to excessive
heat such as sunshine, fire or the like. After use, disposable
batteries should if possible be taken to a suitable recycling centre.
On no account should batteries be disposed of by incineration.
Mains operation
1. Place your radio on a flat surface.
2. Plug the mains lead into the Socket located on the rear of your radio
ensuring that the plug is pushed fully into the socket.
3. Plug the other end of the mains lead into a wall socket and switch
on the wall socket.
IMPORTANT: The mains plug is used as the means of connecting
the radio to the mains supply. The mains socket used for the radio
must remain accessible during normal use. In order to disconnect the
radio from the mains completely, the mains plug should be removed
from the mains socket outlet completely.
4. When the mains LED is off, it indicates that the radio is completely
disconnected from the mains.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Operating your radio - DAB
2
1. Fully extend the telescopic aerial
2. Press the On/Off button to switch on your radio. The display will
show "Roberts DAB digital radio" for a few seconds.
3. If this is the first time the radio is used a quick scan of the UK band
III DAB channels will be carried out. The display will show "Autotune
Quick scan". If the radio has been used before the last used station
will be selected.
4. During Autotune as each group of stations is detected the bottom
line of the display will show its name and the station count will be
updated. The top line of the display shows a bargraph indicating
progress of the Autotune.
5. When the Autotune is complete the first station (in numeric-alpha
order 0...9...A....Z) will be selected.
6. If the station list is still empty after the Autotune you radio will display
"No Signal".
7. If no signals are found it may be necessary to relocate your radio
to a position giving better reception.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
4
020 8758 0338 (Mon-Fri)
Selecting a station - DAB
1. The top line of the display shows the name of the station currently
selected.
2. Rotate the Tuning control or press the Up or Down buttons to scroll
through the list of available stations.
2
2
3. Press and release the Select button to select the station. The display
2
may show "Tuning" while your radio finds the new station.
4. Adjust the Volume and Tone controls to the required settings.
Note: If after selecting a station the display shows "Not Available"
it may be necessary to relocate your radio to a position giving better
reception.
3
4
4
4
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Secondary services - DAB
1. Certain radio stations have one or more secondary services associ-
ated with them. If a station has a secondary service associated with
it the display will show ">" next to the station name on the station list.
The secondary service will then appear immediately after the primary
service as you turn the tuning control.
Display modes - DAB
a
1
Your radio has five display modes:-
1. Press the Info button to cycle through the various modes.
a. Scrolling text
Displays scrolling text messages such
as artist/track name, phone in number
etc.
b
c
b. Program Type Displays type of station being listened to
e.g. Pop, Classic, News etc.
c. Multiplex Name Displays name of multiplex to which
current station belongs.
d. Signal strength Displays signal strength for station being
listened to.
d
e. Time and date Displays current time and date.
e
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
6
020 8758 0338 (Mon-Fri)
Finding new stations - DAB
As time passes new stations may become available. To find new stations
proceed as follows:-
1
1. Press and release the AutoTune button, the display will show
Autotune Quick scan. Your radio will perform a scan of the UK DAB
frequencies. As new stations are found the station counter on the
right-hand side of the display will increase and stations will be added
to the list
2. To carry out a full scan of the entire DAB band III frequencies press
and hold down the AutoTune button for more than 2 seconds and
then release. The display will show Autotune Full scan. As new
stations are found the station counter on the right-hand side of the
display will increase and stations will be added to the list
2
Autoselect - DAB
As an alternative to pressing the Select button to select a station your
radio can be set so as to automatically select a station.
1
1. Rotate the Tuning control a few clicks in either direction, immedi-
ately press and hold down the Select button until the display shows
Autoselect ON.
2. Rotate the Tuning control or press the Up or Down buttons until the
station you require is visible on the display. After a few seconds your
radio will automatically select the station shown on the display.
3. To switch off autoselect rotate the Tuning control a few clicks in
either direction, immediately press and hold down the Select button
until the display shows Autoselect OFF.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Manual Tuning - DAB
1
Manual tuning allows you to tune directly to the various band III DAB
channels. UK DAB stations are currently located in the range 11B to 12D.
1. Press and hold down the Select button until the display shows
Manual tune. Release the Select button.
2
2. Rotate the Tuning control or press the Up or Down buttons to
select the required DAB channel.
3. Press and release the Select button to select the channel.
2
4. Rotate the Tuning control or press the Up or Down buttons to
select the stations contained within the Multiplex (group of stations)
for the selected DAB channel.
3
2
5. Press and release the Select button to return to normal tuning
mode.
Signal strength display - DAB
1. Repeatedly press and release the Info button until the lower line
of the display shows signal strength - see diagram.
1
2. Your radio can now be positioned for best reception using the signal
strength display as guide. Move your radio around and position your
radio so as to give maximum number of black rectangles on signal
strength display.
3. The clear unfilled rectangle indicates minimum signal level required
for satisfactory reception.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
8
020 8758 0338 (Mon-Fri)
Operating your radio - FM
2
3
1. Carefully extend the telescopic aerial
2. Press the On/Off button to switch on your radio. The display will
show "Roberts DAB digital radio" for a few seconds.
4
4
3. Press the FM/DAB button to select the FM band.
4. Press and hold down either the Up or Down buttons until the
frequency in the display begins to change rapidly. Release the
button. Your radio will scan the FM waveband, stopping each time
it finds a station of sufficient strength.
5. After a few seconds the display will update and show station name.
6. To find other stations press hold down the Up or Down button as
before.
8
8
7. When the waveband end is reached your radio will recommence
tuning from the opposite waveband end.
8
8. Adjust the Volume and Tone controls to the required settings.
9. To switch off your radio press the On/Off button.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Manual tuning - FM
1
3
2
3
1. Press the On/Off button to switch on your radio.
2. Press the FM/DAB button to select the FM band. Fully extend the
Telescopic aerial .
3. Rotate the Tuning control or press the Up or Down buttons to tune
to a station. The frequency will change in steps of 50kHz.
3
4. When the waveband end is reached the radio will recommence
tuning from the opposite waveband end.
5. Set the Volume control and Tone controls to the desired settings.
6. To switch off your radio press the On/Off button.
5
5
5
6
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
10
020 8758 0338 (Mon-Fri)
Display modes - FM
a
1
On FM the bottom line of the display can be set to any of the following
modes:-
b
c
1. Press the Info button to cycle through the various modes.
a. Scrolling text
Displays scrolling text messages such as artist/
track name, phone in number etc.
b. Program Type Displays type of station being listened to e.g.
Pop, Classic, News etc.
d
c. Signal strength Displays signal strength for station being listened
to.
e
f
d. Time and date Displays current time and date.
e. Frequency
Displays frequency of the station being listened
to.
f. Audio mode
Display shows Auto (stereo) or mono.
FM Stereo/Mono
1. If a station being received is weak some hiss may be audible. To
reduce the hiss press and hold in the Select button until the display
shows Audio mode : Mono, your radio will switch to mono mode.
1
2. To return to stereo mode press and hold in the Select button until
the display shows Audio mode :Auto, your radio will switch to
stereo mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Presetting stations - DAB and FM
1
There are 10 memory presets for each of the 2 wavebands.
1. Press the On/Off button switch on the radio.
2. Tune to the required station as previously described.
3. Press and hold down the required Preset button until the display
shows e.g. Preset 1 stored. The station will be stored under the
chosen preset button. Repeat this procedure for the remaining
presets.
3
4. Presets 6 to 10 are obtained by pressing +5 followed by Preset
button 1 to 5. e.g preset 7 can be set by pressing +5 followed by
holding down Preset button 2 until the display shows Preset 7
stored.
5. Stations stored in preset memories may be overwritten by following
the above procedure.
4
4
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
12
020 8758 0338 (Mon-Fri)
Recalling a preset station - DAB and FM
1
2
1. Press the On/Off button to switch on the radio.
2. Select the required waveband by pressing the FM/DAB button.
3. Momentarily press the required Preset button, your radio will tune
to the station stored in preset memory.
3
4. Presets 6 to 10 are obtained by pressing +5 and Preset button 1
to 5. e.g preset 7 can be recalled by pressing +5 followed by Preset
button 2
4
4
Download from Www.Somanuals.com. All Manuals Search And Download.
13
System reset
1
2
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Switch off your radio
2. Switch on your radio - before the screen shows Roberts DAB digital
radio press and hold down the Select button until the display
shows System Reset.
2
3. A full reset will be performed all presets and station lists will be
erased.
4. If DAB was used last then a quick scan of the UK band III DAB
channels will be carried out, otherwise a quick scan of the UK band
III DAB channels will be carried out out the next time the DAB band
is selected.
If a problem persists our technical staff would be pleased
to help offer any assistance on operating the radio. Our
technical helpline number is 020 8758 0338.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
14
020 8758 0338 (Mon-Fri)
Headphone socket
A 3.5mm Headphone Socket located on the rear of your radio is
provided for use with either headphones or an earpiece. Inserting a plug
automatically mutes the internal loudspeaker.
IMPORTANT: Excessive sound pressure from earphones and head-
phones can cause hearing loss.
Line out socket
A 3.5mm Line out socket located on the rear of your radio is provided
for connecting the audio signal to an external amplifier. Inserting a line
out audio cable will not mute the internal loudspeaker. Set the volume
control to minimum if desired.
Display backlight
1. When your radio is powered by batteries the display backlight will
be switched on for approximately 12 seconds when any button is
pressed.
2. When your radio is powered by AC mains the display backlight will
always be switched on.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
•
•
No objects filled with liquids such as vases, shall be placed on
the radio.
General
Do not allow this radio to be exposed to water, steam or sand. Do not
leave your radio where excessive heat could cause damage such as in
a parked car where the heat from the sun can build up even though the
outside temperature may not seem too high. It is recommended that the
DAB band be used wherever possible as better results in terms of quality
and freedom from interference will usually be obtained than on the FM
band.
It is recommended to operate the product such that there is a minimum
distance (10cm recommended) to adjacent objects in order to
ensure good ventilation.
•
The ventilation of the product should not be restricted by covering
it or its ventilation openings with items such as newspapers, table-
cloths, curtains etc.
•
•
No naked flame sources such as lighted candles should be placed
on the product.
In case of misfunction due to electrostatic discharge reset your radio
following the proceedure on page 14 (reconnect of power source may
be required) to resume normal operation.
It is recommended to avoid using or storing the product at extremes
of temperature. Avoid leaving the unit in cars, on window sills in
direct sunlight etc.
•
The nameplate is located on the underside of your radio.
Specifications
Power Requirements
Circuit Features
Loudspeaker
Mains
AC 230 volts, 50Hz
6 x LR20 (D size)
only
2 x 79mm 4ohms
3W into 4ohms
Batteries
Output Power
Battery Life
Approx. 28 hours of listening for 4 hours a day
at normal volume using alkaline cells.
Headphone socket
Line out socket
3.5mm dia
3.5mm dia
Frequency Coverage
Aerial System FM
Telescopic aerial
FM
87.5-108MHz
DAB 174.928 - 239.200MHz
DAB Telescopic aerial
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
16
020 8758 0338 (Mon-Fri)
Mains supply
The RD-20 will operate from a supply of AC 230 volts, 50Hz
only.
The wire coloured BLUE must be connected to the terminal marked N or
coloured BLACK.
DO NOT cut off the mains plug from this equipment. If the plug
fitted is not suitable for the power points in your home or the cable is too
short to reach a power point, then obtain an appropriate safety approved
extension lead or adaptor. If in doubt consult your dealer.
The wire coloured BROWN must be connected to the terminal marked L
or coloured RED.
If nonetheless the mains plug is cut off, remove the fuse and dispose of
the plug immediately to avoid a possible shock hazard by inadvertent
connection to the mains supply.
If this product is not supplied with a mains plug, or one has to be fitted,
then follow the instructions given below:
IMPORTANT. DO NOT make any connection to the larger terminal which
is marked with the letter E or by the safety earth symbol
Green or Green-and-yellow.
or coloured
The wires in the mains lead are coloured in accordance with the following
codes :-
BLUE - NEUTRAL
BROWN - LIVE
Fuse
When replacing the fuse only a 3A ASTA approved to BS1362 type
should be used and be sure to re-fit the fuse cover.
IF IN DOUBT - CONSULT A QUALIFIED ELECTRICIAN.
Replacement fuse holders are available from Roberts Radio Technical
Services at the address shown on the rear of this manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Guarantee
This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component
breakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or replaced free
of charge.
The guarantee does not cover:
1. Damage resulting from incorrect use.
2. Consequential damage.
3. Receivers with removed or defaced serial numbers.
N.B. Damaged or broken telescopic aerials will not be replaced under guarantee.
Procedure:
Any claim under this guarantee should be made through the dealer from whom the instrument was purchased. It is likely that your Roberts' dealer
will be able to attend to any defect quickly and efficiently, but should it be necessary the dealer will return the instrument to the company’s service
department for attention. In the event that it is not possible to return the instrument to the Roberts' dealer from whom it was purchased, please contact
Roberts Radio Technical Services at the address shown on the rear of this manual.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
18
020 8758 0338 (Mon-Fri)
ROBERTS RADIO TECHNICAL SERVICES
97-99 Worton Road
Isleworth Middlesex
TW7 6EG
Technical Helpline :- 020 8758 0338 (Mon-Fri during office hours)
Download from Www.Somanuals.com. All Manuals Search And Download.
Issue2
|