Roberts Radio Radio CRD 39 User Guide

CRD-39  
FM RDS/DAB digital radio  
with  
Please read this manual before use  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls  
(Front)  
2
3
2
1
4
5
6
7
8
9
6. Select/Real time button  
7. Infra red sensor  
1. Headphone socket  
2. Loudspeakers  
8. Classic FM button  
3. LCD display  
9.  
button  
4. On/Off button  
5. FM/DAB band button  
If you need any further advice, please call our Technical Helpline on :-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
020 8758 0338 (Mon-Fri)  
Controls  
(Top)  
10  
21  
20  
19  
18  
11  
12  
13  
14  
15  
16  
17  
10. Treble control  
11. Volume control  
12. Sleep button  
13. Station preset buttons  
14. Snooze button  
16. Auto dimmer  
17. Tuning control  
18. Bass control  
19. Info button  
20. Auto tune button  
21. Alarm button  
15. Select/Real time button  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls  
(Rear)  
25 24  
22  
23  
22. Wire DAB/FM aerial  
23. Mains input socket  
24. Optical output socket (toslink)  
25. Line in socket  
If you need any further advice, please call our Technical Helpline on :-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
020 8758 0338 (Mon-Fri)  
Mains operation  
1. Place your radio on a flat surface.  
2. Plug the mains lead into the Socket located on the rear of your radio  
ensuring that the plug is pushed fully into the socket.  
3. Plug the other end of the mains lead into a wall socket and switch on  
the wall socket.  
Theunitremainsconnectedtothemainsevenwhenitisswitched  
off. The unit is only isolated from the mains if the mains plug is  
removed from the wall socket.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating your radio - DAB  
1. The Wire aerial located on the rear of your radio is for DAB/FM recep-  
tion. The wire should be fully extended and positioned for optimum  
reception.  
2
2. Press the On/Off button to switch on your radio. The display will  
show "Roberts DAB digital radio" for a few seconds.  
3. If this is the first time the radio is used a quick scan of UK Band III  
DAB channels will be carried out. The display will show "Autotune  
Quick scan". If the radio has been used before the last used station  
will be selected.  
4. During Autotune as each group of stations is detected the bottom line  
of the display will show its name and the station count will be updated.  
The top line of the display shows a bargraph indicating progress of  
the Autotune.  
5. When the Auto tune is complete the first station (in numeric-alpha  
order 0...9...A....Z) will be selected.  
6. If the station list is still empty after the Autotune your radio will display  
"No Signal".  
7. If no signals are found it may be necessary to relocate your radio to  
a position giving better reception.  
If you need any further advice, please call our Technical Helpline on :-  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
020 8758 0338 (Mon-Fri)  
Selecting a station - DAB  
1. The top line of the display shows the name of the station currently  
selected.  
2. Rotate the Tuning control to scroll through the list of available sta-  
tions. Stop rotating the Tuning control when you find the station that  
you wish to hear.  
2
3. Press the Select/Real time button to select the station. The display  
may show "Tuning" while your radio finds the new station.  
4. Adjust the Volume, bass and treble controls to the required  
settings.  
3
Note: If after selecting a station the display continues to show "Not  
Available" it may be necessary to relocate your radio to a position  
giving better reception.  
4
4
4
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Secondary services - DAB  
1. Certainradiostationshaveoneormoresecondaryservicesassociated  
with them. If a station has a secondary service associated with it the  
display will show ">" next to the station name on the station list. The  
secondary service will then appear immediately after the primary  
service as you rotate the tuning control clockwise.  
Display modes - DAB  
a
Your radio has six display modes:-  
1. Press the Info button to cycle through the various modes.  
a. Scrolling text  
Displays scrolling text messages such  
as artist/track name, phone in number,  
etc.  
b
c
d
1
b. Programme type  
c. Multiplex Name  
d. Signal strength  
Displays type of station being listened to  
e.g. Pop, Classic, News, etc.  
Displays name of multiplex to which  
current station belongs.  
Displays signal strength for station being  
listened to.  
e
f
e. Time and date  
f. Maximum delay  
Displays current time and date.  
Displays maximum time that the  
current station can be delayed when  
using pauseplus  
If you need any further advice, please call our Technical Helpline on :-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
020 8758 0338 (Mon-Fri)  
Finding new stations - DAB  
As time passes new stations may become available. To nd new stations  
proceed as follows:-  
1
2
1. Press and release the AutoTune button, the display will show "Au-  
totune Quick Scan". Your radio will perform a scan of the UK DAB  
frequencies. As new stations are found the station counter on the  
right-hand side of the display will increase and stations will be added  
to the list.  
2. To carry out a full scan of the entire DAB Band III frequencies press  
andholddowntheAutoTunebuttonformorethan2secondsandthen  
release. The display will show "Autotune Full scan". As new stations  
are found the station counter on the right-hand side of the display will  
increase and stations will be added to the list.  
Autoselect - DAB  
As an alternative to rotating the tuning control to select a station your radio  
can be set so as to automatically select a station.  
1. Rotate the Tuning control to scroll through the list of available sta-  
1,3  
tions.  
2. Immediately press and hold in the Select/Real time button for 2  
seconds until the display shows "Autoselect ON".  
3. Rotate the Tuning control until the station you require is visible on  
the display, after a few seconds your radio will automatically select  
the station shown on the display.  
4. To switch off Autoselect rotate the Tuning control to scroll through  
thelistandimmediatelypressandholdintheSelect/Realtimebutton  
until the display shows "Autoselect OFF".  
2,4  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manual Tuning - DAB  
Manual tuning allows you to tune directly to the various DAB Band III  
channels. UK DAB stations located in the range 11B to 12D.  
1. Press and hold in the Select/Real time button until the display shows  
1,3,5  
"Manual tune".  
2. Rotate the Tuning control to select the required DAB channel.  
3. Press and release the Select/Real time button to select the chan-  
nel.  
4. Rotate the Tuning control to select the stations contained within the  
Multiplex for the selected DAB channel.  
2,4  
5. Press and release the Select/Real time button to return to normal  
tuning mode.  
Signal strength display - DAB  
1. Repeatedly press and release the Info button until the lower line of  
the display shows signal strength.  
2. Positionyourradioandthewireaerialforbestreceptionusingthesignal  
strength display as a guide. Move your radio around and position so  
as to give maximum number of black rectangles on signal strength  
display.  
1
3. The clear unfilled rectangle indicates minimum signal level required  
for satisfactory reception.  
If you need any further advice, please call our Technical Helpline on :-  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
020 8758 0338 (Mon-Fri)  
Using your radio's Pauseplus feature  
How many times has your favourite radio station been interrupted by  
that phone call from a double glazing firm or someone selling that must  
have item? Sound familiar? Now with a single press of the  
button you can put your favourite station on hold while you answer that  
important call. After the call or other important task is finished simply  
1
2
press the  
button to return to your favourite station exactly  
where you left off so that you never miss a single word.  
Radio stations can effectively be put on hold for typically 15 minutes  
but can be up to 35 minutes depending on the station you are listening  
to.  
Note the  
waveband.  
feature only operates on the DAB  
1. To place your radio in  
mode simply press the  
button, the sound from the loudspeaker will be muted. The display  
will alternate between PAUSE and the time which the radio station  
has been on Pause.  
2. To return to the radio station that you were listening to simply press  
the  
button and your radio will continue playing from where  
you left off. The display will alternate between DELAY and the amount  
by which you are behind real time.  
3. When using your radio's  
feature the lower line of display  
automatically switches to show the Maximum delay time for the station  
you are listening to.  
4. To return to real time press in and release the Select/Real time but-  
ton, the display will return to show DAB in right hand corner.  
4
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pauseplus continued  
1. Your radio’s  
feature is continuiously working silently in  
the background even when your radio is in Standby mode so, say for  
example, you want to hear a news item again switch on your radio  
using the On/off button and press  
button twice, use the  
1
Tuningcontroltoscrollbacktotheitemyouwishtolisten.Thedisplay  
will show the amount of time you have scrolled back.  
Note when your radio is in standby the  
memory will  
continuiously store up to 35 minutes of the last station listened  
to.  
2. When using your radio's  
feature the lower line of display  
automatically switches to show the Maximum delay time for the station  
you are listening to.  
1
If you need any further advice, please call our Technical Helpline on :-  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
020 8758 0338 (Mon-Fri)  
Operating your radio - FM  
2
3
1. The Wire aerial located on the rear of your radio is for DAB/FM recep-  
tion. The wire should be fully extended and positioned for optimum  
reception.  
2. Press the On/Off button to switch on your radio. The display will show  
"Roberts DAB digital radio" for a few seconds.  
3. Press the FM/DAB Band button to select the FM band.  
4. Press and immediately release the Auto Tune button, your radio will  
scan in an upwards direction (low frequency to high frequency) and  
stop automatically when it finds a station of sufficient strength.  
4
5. After a few seconds the display will update and show station name.  
6. To nd other stations press and release the AutoTune button as  
before.  
7. To scan the FM band in a downwards direction (high frequency to low  
frequency)pressandholddowntheAutoTunebuttonfor0.5seconds  
and then release.  
9
9
9
8. Whenthewavebandendisreachedyourradiowillrecommencetuning  
from the opposite waveband end.  
9. Adjust the Volume, treble and bass controls to the required  
10  
settings.  
10. To switch off your radio press the On/Off button.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manual tuning - FM  
1. Press the On/Off button to switch on your radio.  
1
2
2. Press the FM/DAB Band button to select the FM band. Fully extend  
the Wire DAB/FM aerial and position for optimum reception.  
3. Rotate the Tuning control to tune to a station. The frequency will  
change in steps of 50kHz.  
4. When the waveband end is reached the radio will recommence tuning  
from the opposite waveband end.  
3
5
5. Set the Volume, treble and bass controls to the desired settings.  
6. To switch off your radio press the On/Off button.  
5
5
6
If you need any further advice, please call our Technical Helpline on :-  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
020 8758 0338 (Mon-Fri)  
Display modes - FM  
a
b
On FM the bottom line of the display can be set to any of the following  
modes:-  
1. Press the Info button to cycle through the various modes.  
1
a. Scrolling text  
Displays scrolling text messages such  
as artist/track name, phone in number  
etc.  
c
b. Programme Type  
c. Signal strength  
Displays type of station being listened to  
e.g. Pop, Classic, News, etc.  
d
Displays signal strength for station being  
listened to.  
e
f
d. Time and date  
e. Frequency  
Displays current time and date.  
Displays frequency of the station being  
listened to.  
f. Audio mode  
Display shows Auto (stereo) or mono.  
FM Stereo/Mono  
1. If a station being received is weak some hiss may be audible. To re-  
duce the hiss repeatedly press the Select/Real time button until the  
display shows "Audio mode : mono" your radio will switch to mono  
mode.  
2. ToreturntostereomoderepeatedlypresstheSelect/Realtimebutton  
until the display shows "Audio mode :Auto", your radio will switch to  
stereo mode.  
1,2  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Presetting stations - DAB and FM  
1
There are 5 memory presets for each of the 2 wavebands.  
1. Press the On/Off button to switch on your radio.  
2. Tune to the required station as previously described.  
3
3. PressandholddowntherequiredPresetbuttonuntilthedisplayshows  
e.g. "Preset 1 stored". The station will be stored under the chosen  
preset button. Repeat this procedure for the remaining presets.  
4. Stations stored in preset memories may be overwritten by following  
the above procedure.  
Recalling a preset station - DAB and FM  
1. Press the On/Off button to switch on your radio.  
2. Select the required waveband by pressing the FM/DAB Band but-  
1
3
ton.  
3. Momentarily press the required Preset button, your radio will tune to  
the station stored in preset memory.  
Note: If you have not previously stored a preset station and the preset  
button is pressed "preset N empty" will be displayed.  
2
If you need any further advice, please call our Technical Helpline on :-  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
020 8758 0338 (Mon-Fri)  
System reset  
If your radio fails to operate correctly, or some digits on the display are  
missing or incomplete carry out the following procedure.  
1
1. Press and hold in the Info button until the display shows CRD39  
v1.03.  
2. Press the Info button twice the display will show "Select to Reset".  
3. Press in and release the Select/Real time button to select System  
reset.  
2
4. If DAB was used last then a "Quick scan" of the DAB band will be  
performed, otherwise a "Quick scan" will be carried out the next time  
the DAB band is selected.  
If a problem persists our technical staff would be pleased to help offer  
any assistance on operating the radio. Our technical helpline number  
is 020 8758 0338.  
3
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Classic FM button  
Your radio is fitted with a button which when pressed will automatically  
tune your radio to Classic FM on the DAB waveband.  
1
1. Press the Classic FM button.  
2. Your radio will automatically tune to Classic FM.  
Note: If Classic FM is not available in your area the display will  
show "Not Available". As an alternative it may be possible to listen to  
classic FM on the FM waveband.  
Software version  
The software display cannot be altered and is for your reference only.  
1
1. To view the software version your radio has, press and hold in the  
Info button. The software version will appear on the display.  
If you need any further advice, please call our Technical Helpline on :-  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
020 8758 0338 (Mon-Fri)  
Sleep function  
Your clock radio can be set to turn off after a preset time has elapsed.  
1. Press the Sleep button the display will show "Sleep after 30 min-  
1
utes".  
2. Rotate the Tuning control to increase the time by 1 minute incre-  
ments, up to a maximum of 99 minutes.  
3. Rotating the Tuning control in the opposite direction will decrease  
the time by 1 minute increments.  
2
4. Your radio will switch off after the preset sleep time has elapsed.  
5. To cancel the sleep function before the preset time has elapsed, press  
the On/Off button.  
5
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alarm display  
2
1
3
4
5
6
7
8
9
1. Alarm/timer number indicator (1-5)  
2. Alarm/timer mode indicator  
DAB/FM/BUZZER  
3. DAB - Station indicator  
FM - Frequency indicator  
4. Day indicator  
5. Month indicator  
6. Year indicator  
7. Alarm/timer hour indicator  
8. Alarm/timer minute indicator  
9. Alarm/timer duration indicator  
If you need any further advice, please call our Technical Helpline on :-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
020 8758 0338 (Mon-Fri)  
Alarms/timers  
Your radio has five separate alarms/timers which can be set to activate at  
different times and six different day options from which to choose.  
Your buzzer alarm has a humane wake system whereby the alarm starts  
at a low level and gradually works up to a high level.  
1
1. Press and release the Alarm button, "alarm 1-5" will flash in the  
display.  
2. Rotate the Tuning control to select the required alarm 1- 5.  
2,4  
3. Press and release the Select/Real time button to step forward to the  
alarm mode. The alarm mode indicator will flash in the display.  
4. Rotate the Tuning control to select the required alarm mode. Select  
either DAB, FM or BUZZER.  
DAB alarm mode  
3
If DAB alarm mode has been selected, press and release the Select/  
Real time button to step forward to select the DAB station name. The  
station name indicator will flash in the display.  
Rotate the Tuning control to select the required DAB station.  
FM alarm mode  
If FM alarm mode has been selected, press and release the Select  
/Real time button to step forward to select the FM frequency. The  
frequency indicator will flash in the display.  
Rotate the Tuning control to select the required  
frequency.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. PressandreleasetheSelect/Realtimebuttontoentertheday.Theday  
indicator will flash in the display.  
6. Rotate the Tuning controls to select the required day.  
5,7  
7. Press and release the Select/Real time button to step forward to  
enter the month. The month indicator will flash in the display.  
8. Rotate the Tuning control to select the required month.  
9. Press and release the Select/Real time button to step forward to  
enter the year. The year indicator will flash in the display.  
6,8  
10. Rotate the Tuning control to select the required year.  
9
10  
If you need any further advice, please call our Technical Helpline on :-  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
020 8758 0338 (Mon-Fri)  
11. Press and release the Select/Real time button to step forward to  
enter the alarm hour. The hour indicator will flash in the display.  
12. Rotate the Tuning control to select the required hour.  
11  
13. Press and release the Select/Real time button to step forward to  
enter the alarm minute. The minute indicator will flash in the display.  
14. Rotate the Tuning control to select the required minute.  
15. Press and release the Select/Real time button to step forward to  
enter the alarm duration. The alarm duration indicator will flash in the  
display.  
12,14  
16. Rotate the Tuning control to select the required alarm  
duration. This can be set in 1 minute increments (maximum 240  
minutes).  
13,15  
16  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17. PressandreleasetheSelect/Realtimebuttontostepforwardtoenter  
the day option. The day option indicator will flash in the display.  
18. Rotate the Tuning control to select the required alarm  
day option.  
17  
Your alarm can be set to sound once, daily, weekly, weekends,  
weekdays or monthly.  
Once  
Daily  
- Will sound at one time only  
- Will sound every day  
Weekly  
Weekends  
Weekdays  
Monthly  
- Will sound once every week  
- Will sound only on weekends  
- Will sound on a particular weekday  
- Will sound every month  
18  
19. Press the Select/Real time button to confirm settings.  
20. To exit the alarm setup and return to the normal radio mode press the  
On/Off button at any time during the setup process.  
19  
21. Press the On/Off button again and the radio will remain in standby  
mode until the alarm sounds. The alarm/timer symbol  
in the display.  
will appear  
The alarm will sound at the selected alarm time.  
21  
The radio alarm volume will be the volume previously listened to when  
setting up the alarms.  
If you need any further advice, please call our Technical Helpline on :-  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
020 8758 0338 (Mon-Fri)  
Snooze function  
1. The radio or buzzer alarm can be silenced for 7 minutes by pressing  
2
and releasing the Snooze button. This sequence can be repeated  
1
1
during the alarm period. The snooze symbol  
display.  
will appear on the  
2. Press the On/Off button to cancel the snooze completely.  
Cancelling alarms  
Note: The alarm will activate for 60 minutes unless a specified alarm  
duration has been entered (maximum 240 minutes).  
1. Press the On/Off button twice to switch the alarm off.  
2. Enter the alarm setup menu and select the alarm mode to the "OFF"  
position.  
Auto Dimmer  
The Auto Dimmer located on top of the right side of the LED display  
will automatically adjust the intensity of the clock display to suit room  
brightness.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to an external amplifier or recorder  
You can connect your radio to an external amplifier or recorder. This may  
be a stand-alone unit or it may be part of your existing hi-fi system.  
1. Connect the optical toslink connector to the optical input socket(s) on  
your amplifier or recorder using a suitable cable.  
1
Recording from your radio  
Your radio has five alarm/timers which can be set to switch on your radio  
at a preset day, time, and station. See section on page 21 for details on  
how to set alarm/timers  
1. A programme/station can be recorded to an external device via the  
optical toslink connector located on the rear of your radio. Connect  
the optical toslink connector to the optical input socket(s) on your  
recorder using a suitable cable.  
Most mini disc units have a record pause mode that enables the mini  
disc to start recording as soon as a signal appears on the mini disc  
input. When your radio switches on controlled by the alarm timer the  
mini disc will start recording.  
Subsequenttimereventsarethenrecordedontotrack2,3,etc.Consult  
your hi-fi or mini disc user guide for further details. The volume on  
your radio can be set to 0 so that you will not be disturbed during the  
recording. The volume control does not affect the recording level.  
Note: The timer record function is for personal use only.  
If you need any further advice, please call our Technical Helpline on :-  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
020 8758 0338 (Mon-Fri)  
Clock display  
1. Your radio will display clock time when it is set to Standby mode.  
2. During Standby mode the clock will receive updates from the last  
station tuned to before entering Standby mode.  
When in Standby mode your radio's clock will automatically track  
Summer\Winter time changes.  
Display backlight  
1. The display backlight will illuminate when your radio is switched on  
and dim to about one tenth of the full brightness when your radio is in  
standby mode.  
Headphone socket  
1. A3.5mmHeadphoneSocketlocatedonthelefthandsideofyourradio  
is provided for use with either headphones or an earpiece. Inserting  
a plug automatically mutes the internal loudspeaker.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Line in socket (3.5mm Jack)  
1. Connect a stereo or mono audio source (ie iPod, MP3 or CD player) to  
theLineinsocket.Informationfromyourradio'sdisplaywilldisappear  
- the backlight will be illuminated indicating that your radio is switched  
on.  
1
2. Adjust the Volume control on your iPod, MP3 or CD player for com-  
fortable listening.  
TheAlarm/Timers will not operate while you have any connection  
to the Line in socket.  
Note: When you connect the audio source your radio will be muted.  
You must adjust the volume on your iPod, MP3 or CD player in order  
to play the sound through your radio speakers.  
Optical output socket  
1. A digital optical output socket is provided on the rear of your radio for  
connection to an amplifier, mini-disc or other equipment with a digital  
optical input.  
1
If you need any further advice, please call our Technical Helpline on :-  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
020 8758 0338 (Mon-Fri)  
1
14  
Remote control  
13  
12  
2
3
4
11  
10  
9
5
6
7
8
1. Alarm button  
2. Auto Tune button  
9. Select/Real time button  
10. Tuning Down button  
11. Tuning Up button  
12. Classic FM button  
13. On/Off/Sleep button  
14. FM/DAB button  
3.  
button  
4. Preset buttons  
5. Volume Up button  
6. Volume Down button  
7. Info button  
8. Snooze button  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote handset battery replacement  
1. Remove the battery cover on the rear of your remote control by push-  
ing the battery door in and downwards.  
2. Insert 2 x AAA size batteries into the compartment. Make sure the (+)  
and the (-) ends of the batteries are positioned as shown inside the  
compartment.  
3. Close the battery cover.  
4. If the remote is not to be used for an extended period of time it is  
recommended that the batteries are removed.  
If you need any further advice, please call our Technical Helpline on :-  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
020 8758 0338 (Mon-Fri)  
Using the remote control  
The buttons on the remote control have the same functions as the front  
and top panel controls with the following exceptions:-  
Tuning Up/down buttons and Volume Up/Down buttons instead of the  
rotary control.  
The sleep function can be operated by using the On/Off button. Press  
and hold the On/Off/Sleep button until the sleep options appear on the  
display.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General  
Do not allow this radio to be exposed to water, steam or sand. Do not  
leave your radio where excessive heat could cause damage. It is recom-  
mended that the DAB band be used wherever possible as better results  
in terms of quality and freedom from interference will usually be obtained  
than on the FM band.  
The name plate is located on the bottom panel.  
Specifications  
Power Requirements  
Mains  
Circuit Features  
Loudspeaker  
AC 230 volts, 50Hz  
2 x AAA size  
only  
2 x 76 mm  
Battery (Remote control)  
Output Power  
3W into 4 ohms  
Frequency Coverage  
FM  
DAB  
87.5-108MHz  
174.928 - 239.200MHz  
Headphone socket  
Line in socket  
3.5mm dia  
3.5mm dia  
Digital optical output socket  
Aerial System  
FM  
DAB  
Wire aerial  
Wire aerial  
If you need any further advice, please call our Technical Helpline on :-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
020 8758 0338 (Mon-Fri)  
Mains supply  
The CRD39 will operate from a supply of AC 230 volts, 50Hz  
only.  
The wire coloured BLUE must be connected to the terminal marked N or  
coloured BLACK.  
The wire coloured BROWN must be connected to the terminal marked L  
or coloured RED.  
DO NOT cut off the mains plug from this equipment. If the plug fitted  
is not suitable for the power points in your home or the cable is too short  
to reach a power point, then obtain an appropriate safety approved exten-  
sion lead or adaptor. If in doubt consult your dealer.  
If nonetheless the mains plug is cut off, remove the fuse and dispose of  
the plug immediately to avoid a possible shock hazard by inadvertent  
connection to the mains supply.  
If this product is not supplied with a mains plug, or one has to be fitted,  
then follow the instructions given below:  
IMPORTANT. DO NOT make any connection to the larger terminal which  
is marked with the letter E or by the safety earth symbol  
Green or Green-and-yellow.  
or coloured  
The wires in the mains lead are coloured in accordance with the following  
codes :-  
BLUE - NEUTRAL  
BROWN - LIVE  
Fuse  
When replacing the fuse only a 3AASTAapproved to BS1362 type should  
be used and be sure to re-fit the fuse cover.  
IF IN DOUBT - CONSULT A QUALIFIED ELECTRICIAN.  
Replacement fuse holders are available from Roberts Radio Technical  
Services at the address shown on the rear of this manual.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guarantee  
This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component  
breakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or replaced free  
of charge.  
The guarantee does not cover:  
1. Damage resulting from incorrect use.  
2. Consequential damage.  
3. Receivers with removed or defaced serial numbers.  
N.B. Damaged or broken telescopic aerials will not be replaced under guarantee.  
Procedure:  
Any claim under this guarantee should be made through the dealer from whom the instrument was purchased. It is likely that your Roberts' dealer  
will be able to attend to any defect quickly and efficiently but should it be necessary the dealer will return the instrument to the Company’s service  
department for attention. In the event that it is not possible to return the instrument to the Roberts' dealer from whom it was purchased, please contact  
Roberts Radio Technical Services at the address shown overleaf.  
If you need any further advice, please call our Technical Helpline on :-  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
020 8758 0338 (Mon-Fri)  
ROBERTS RADIO TECHNICAL SERVICES  
97-99 Worton Road  
Isleworth Middlesex  
TW7 6EG  
Technical Helpline :- 020 8758 0338 (Mon-Fri during office hours)  
Issue 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Raypak Swimming Pool Heater 185B User Guide
RBH Sound Speaker WM 24 User Guide
Ricoh Scanner IS100e User Guide
Roberts Radio Clock Radio CRD 29 User Guide
Rosewill Computer Hardware RC212 User Guide
Samsung IP Phone SMT I5220 User Guide
Samsung Printer SRP 270 User Guide
Sansui Flat Panel Television HDLCDVD220 User Guide
Sanyo Battery Charger N 1300SCR User Guide
Sears Saw 31527516 User Guide