R876
Multi-band digital preset stereo world radio
Please read this manual before use
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
! Continuous gap free tuning of LW, MW and SW
! SW metre buttons offer instant selection of any de-
bands
sired SW band.
! Large easy to read Liquid crystal display (LCD) show-
ing station frequency, dual time, memory location and
function status.
! Dual Alarm Feature allows presetting of two alarm
wake-up times.
! ATS (Auto Tuning System) which will automatically
scan LW, MW, and SW frequencies selecting pre-
sets based on station signal strength.
! Direct frequency entry by keypad allowing instant ac-
cess to any station.
! Fifty four memory presets offer instant access to your
! Adjustable sleep timer allows you to fall asleep to
favourite stations on LW, MW, FM and SW.
music.
! Dual time facility allows you to preset your local time
or UTC time, or any two time zones with instant re-
call.
! Scanning circuit allows you to search for active sta-
tions.
! Cancel button allows you to instantly change incor-
rect information keyed into the microprocessor.
1
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Control locations
1. Power on/off and sleep button.
2. Fine tune button.
11. LW band, LW ATS and radio standby button.
12. MW band, MW ATS and HWS standby button.
3. Manual/auto scan tuning buttons.
4. Enter button.
13. SW band, SW metre band and count down timer
button.
14. Liquid crystal display.
15. Light button (on top).
16. Tuning indicator.
5. Memory and time set button.
6. Frequency select button.
7. Cancel button.
8. Decimal point and zero set button.
9. 0 digit, 0 memory and SW metre button.
10. FM band, FM ATS and real/dual time button.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
16
10
11
12 13 14 15
1
2
3
4
5
6
9
8
7
3
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
17. Earphone socket.
21
18. DC input socket.
19. AM external aerial socket.
20. FM Mono/stereo and AM DX/Local switch.
21. Telescopic aerial.
19
20
17
18
24
22
22. Volume control.
23. Lock switch.
24. Folding stand.
23
4
Download from Www.Somanuals.com. All Manuals Search And Download.
25. Reset button.
26. 9/10kHz MW step switch.
27. Battery compartment.
28. Battery cover.
26 25
27
28
5
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Display information
1. Waveband indicators.
2. Time set status.
17. Count down timer indicator.
18. Memory preset, battery strength and ATS
scanning indicator.
3. Zero second set indication.
4. Memory indicator.
19. Fine tune indicator.
5. SW Memory 10-18 indicator.
6. Sleep function indicator.
7. Lock switch indicator.
13
2
3
10
6
7
8
9
8. FM stereo indicator.
9. SW metre band indicator.
10. Auto Tuning System indicator.
12
19
11
1
11. Low battery indicator.
12. Frequency units indicator.
13. Frequency and time display
14. Dual time indicator.
18
4
15. Radio standby indicator.
16. HWS standby indicator.
5
14
15
16
17
6
Download from Www.Somanuals.com. All Manuals Search And Download.
This radio can be operated using:-
3 Alkaline LR6 (AA size) batteries.
AC adaptor (supplied).
Installing batteries
1. Position the radio face down.
2. Press the catch marked "OPEN" and slide in the
direction shown.
7
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
3. Insert the 3 LR6 (AA) size batteries as shown in the
diagram.
4. Replace the battery cover as shown in the diagram.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery replacement
The battery indicator will display the battery condition for
approx. 7 seconds after the radio is switched off. If the
indicator falls below "2" the batteries should be replaced.
After removing the batteries you have approximately 3
minutes to replace the batteries after which clock and
memory information will be lost.
9
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Low battery warnings
1. Replace batteries if the battery indicator falls below
"2"
2. Replace batteries if "E" and the low battery indicator
flash in the display.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Whenever the low battery symbol appears on the
display the batteries should be replaced.
11
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Using the AC adaptor
The AC adaptor supplied with this radio is an auto-switch-
ing type and will operate from either a 110volt or 230volt
AC supply.
Insert the adaptor plug into the socket marked DC IN 4.5V
on the left side of the radio. Plug the adaptor into a stand-
ard 13A mains socket outlet. Whenever the adaptor is used
the batteries are automatically disconnected.
The mains adaptor should be disconnected from the mains
supply when not in use.
We would recommend for economy that the R876 be
used via the AC adaptor wherever possible with bat-
tery operation for occasional or stand-by use only.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock
The clock will start running when the 3 LR6 (AA) size
batteries are installed. The display will show "0:00".
The clock can be set with the radio power on or off.
1. If the radio is switched on press the "Display" button
to display the time.
2. Press the"Time Set" button for more than 2 seconds,
the " SET " symbol will flash in the display
13
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
3. Whilst the " SET " symbol is flashing, set the correct
time by pressing the numbered buttons. As you press
each button the corresponding number will show on
the display.
4. If you press the wrong number, press the"C" (cancel)
button which will delete one number at a time.
Note: Time can only be adjusted whilst the " SET
"
symbol is flashing in the display.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press the"Enter"button to complete setting the clock,
the display will now show the correct time.
Note: Time should be entered in 24Hr format e.g. 3:00pm
would be entered as 15:00.
Setting dual time
In addition to real time a second time zone can be pro-
grammed into this radio.
1. Press the "Real/Dual" button the display will show and
flash "
".
15
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
2. Press"Enter "button within 3 seconds, the display
will stop flashing.
3. Press and hold down the "Time Set" button for more
than 2 seconds, the display "Set" will flash.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
4. While " SET " symbol is flashing, set the correct time
by pressing the numbered buttons. As you press each
button the corresponding number will show on the dis-
play.
5. If you press the wrong number, press the"C" (cancel)
button which will delete one number at a time.
17
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
6. Press the "Enter" button to complete setting the dual
time, the display will now show the correct dual time.
7. Press the "
" button followed by the "Enter"
button to return the display to real time.
Note:
a. To temporarily change between real and dual time mode
press the " " button, the symbol and dual
time will be shown in the display. After approximately 3
seconds the display will return to showing real time.
b. To permanently change the display to dual time mode
press the"
ton. The
mode.
" button followed by the"Enter" but-
symbol in the display indicating dual time
c. To permanently change the display back to real time
mode press the "
"Enter" button. The
the display.
" button followed by the
symbol will be removed from
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Zero seconds set
Press the "Time Set" button for more than 2 seconds,
the " SET " symbol will flash in the display. Press the "0
set" button, the display will show and flash "Set-00".
Press the "Enter" button to reset seconds to 0.
19
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Waveband selection
There are four waveband selection buttons located be-
low the Liquid crystal display.
Waveband
Frequency coverage
FM
87.5-108
153-513
522-1710
MHz
kHz
kHz
LW
MW
SW
1.711-29.999 MHz
20
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Turn on the radio by pressing the"Power/Sleep" but-
ton. The display will show the last waveband and fre-
quency selected.
2. Press one of the four waveband select buttons, the
last frequency used on the selected waveband will be
recalled and appear on the display.
21
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Note:
If the SW band is selected pressing the "SW/Metre"
button a second time will display a flashing "m" indicat-
ing that a SW metre band may now be selected. For ex-
ample pressing the "6/41m" button will allow direct ac-
cess to the 41 metre band.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning
Frequency Range
520-1710kHz
Aerial Type
Illustration
Band
INTERNAL
Rotate for best reception
MW
INTERNAL
LW
153-513kHz
Rotate for best reception
23
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Frequency Range
87.5 - 108MHz
Aerial Type
Illustration
Band
FM
TELESCOPIC
Fully extend the aerial, angle and ro-
tate for best reception.
TELESCOPIC
Fully extend the aerial, for best re-
ception
SW
1.711-29.999MHz
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Stations may be selected by using any one of the five different available tuning methods:
Direct Tuning • Manual Tuning • Scan Tuning • Memory Recall Tuning • ATS Tuning on LW, MW and FM bands.
Direct tuning
Example: To tune to 100.70 MHz on the FM band.
1. Press the "Power/Sleep" button to turn on the radio.
2. Press the button marked "Freq" (Frequency)
25
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
3. Press the buttons marked [1] [0] [0] [.] [7] [0].
Note: If a mistake is made during entry press the "C"
button to clear the last digit entered.
4. Press the button marked "Enter", the frequency and
waveband will now appear in the display.
Note: Make sure that you enter the decimal point [.] in
100.70 MHz otherwise the display will show"SW" [10.070
MHz].
26
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Extend the aerial fully and rotate for best FM recep-
tion.
6. Adjust the Volume control for comfortable listening.
27
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
7. When selecting a stereo FM station, and using stereo
earphones, make sure that the FM mode switch is in
the STEREO position.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual tuning
1. Press the "Power/Sleep" button to turn on the radio.
2. Select a waveband.
29
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
3. A single press on the either the [
] or [
] down
buttons will change the frequency up or down.
Note: Each press of the [ ] or [ ] buttons will change
the frequency in increments of:
FM:
50kHz
LW:
MW:
SW:
1kHz or 9kHz
1kHz or 9kHz/10kHz
1kHz or 5kHz
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Scan tuning
1. Turn on the radio by pressing the"Power/Sleep" but-
ton.
2. Select a waveband.
31
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
4. Press and hold down either the tuning [
] or [
]
buttons for more than half a second to commence scan
tuning. The radio will scan all frequencies in the se-
lected band and stop automatically each time it finds
an active station.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press and hold down either the tuning [
] or [
]
buttons for more than half a second to resume scan
tuning. When the waveband end is reached the radio
will beep and continue tuning from the opposite wave-
band end.
6. Adjust the Volume control for comfortable listening.
33
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Memory tuning
You may store up to 54 preset stations in memory, 18 on
SW, 18 on FM, 9 on LW and 9 on MW. To store a station in
preset memory proceed as follows.
1. Turn on the radio by pressing the"Power/Sleep" but-
ton.
2. Tune to the desired frequency using one of the previ-
ously described tuning methods.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press the button marked "M" (memory), the memory
symbol "M"together with a suggested preset number
will flash in the display for 12 seconds.
Note: If some of the presets have already been used the
radio will suggest the next available preset location.
4. Press the"Enter"button and your station will be stored
in the suggested memory preset.
35
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
5. Preset stations may be exchanged easily and at any
time. Select the preset that is to be changed by press-
ing the corresponding numbered button, press the"M"
button, "M" and current preset location will flash in the
display, whilst the display is flashing select the new
preset location using one of the numbered buttons.
6. The FM and SW bands have 18 presets. Presets 1-9
are set in the normal manner. When presets 1-9 are full
selecting another station to be preset will cause the dis-
play to show"P2". An additional 9 presets can now be
stored.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
1. If all the preset memory locations are full pushing the
"M" button will cause the display to show "FULL". If
you still want to store a new station press any button
1-9 for more than 2 seconds, the new station will be
stored in the selected memory location, the original
station in this location will be cancelled.
2. Selecting a station or frequency that is already stored
in preset memory will cause the display to show "[ ]"
together with the stations preset memory location.
The symbol "[ ]" indicates that the frequency has al-
ready been stored.
37
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Recalling a station from preset memory
1. Turn on the radio by pressing the"Power/Sleep" but-
ton.
2. Select the waveband for the station required.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press the button corresponding to the preset memory
location for the required station. The radio will instantly
tune to the station and the display will show its frequency
and memory location. If you wish to select another pre-
set station press any one of the numbered buttons for
instant access. For SW presets 01-09, push the "P1/
P2"button until the"P2" symbol appears in the display
followed by any one of the numbered buttons.
only for FM and SW
Cancelling a preset station
1. Recall the preset station, push the "M" button. The
preset location and "M" will flash in the display, push
"C" to cancel the preset station.
39
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Changing preset station order
e.g. exchanging preset station 2 with preset station 7.
1. Recall preset 2.
2. Push the button"M", preset 2 and"M" will flash in the
display.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Push button "7". Presets 2 and 7 will now be ex-
changed.
41
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
ATS (Auto Tuning System)
This radio provides an easy to use feature called ATS
(Auto Tuning System) which operates on FM, LW and
MW bands.
1. Turn on the radio by pressing the"Power/Sleep" but-
ton.
2. Push any one of the FM/LW/MW band buttons for more
than 2 seconds. The radio will beep and the display
will flash "ATS" indicating the radio is in ATS mode.
3. The radio will then scan from the lowest frequency on
the selected waveband, automatically storing stations in
preset memory 1-9 based on signal strength order. On
FM a further 9 stations will be stored in memory page 2.
Memory page 2 is selected by pressing the "P1/P2"
button until the display shows"P2"
42
Download from Www.Somanuals.com. All Manuals Search And Download.
4. After scanning is complete, a beep will be heard. The
display will show"M [1]"and the station with the strong-
est signal for your area will be selected.
5. If during ATS operation no stations are found the dis-
play will show "- - - - -" for 2 seconds before returning
to the last frequency used prior to commencement of
ATS operation.
43
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Note:
1. The maximum number of presets on MW and LW is 9,
if during ATS operation more than 9 stations are found
only the 9 strongest stations will be stored in the preset
memories. On FM the maximum number of presets is
18, if during ATS operation more than 18 stations are
found only the 18 strongest stations will be stored in the
preset memories.
2. If the number of stations found during ATS operation is
less than 9 the display will show the actual number of
stations found. For example, if only 5 stations are found,
the display will show "[1] 2 3 4 5, when scanning is
complete.
3. The SW band has no ATS function.
4. All previously stored preset stations will be erased when
ATS operation commences.
5. ATS operation can be cancelled by pressing the"Power/
Sleep" button.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the alarm
The alarm can be set with the radio power on or off.
1. If the radio is switched on press the "Display" button
to display the time.
45
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Setting the radio alarm (Standby)
1. Press the
button the display will flash
and show the last alarm time set, (this will
be "0:00" the first time the alarm is set).
46
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press the numbered buttons to set the alarm on time.
e.g. to set an alarm time of 13:30, press the buttons
"[1] [3] [3] [0]". If a wrong number was keyed in, press-
ing the "C" button will delete one digit for each press.
Press the"Enter" button, the display will show"13:30"
and "Standby" will stop flashing indicating that the
alarm has been set to 13:30.
If the time keyed in is not valid i.e. 25:30, the display will
show "E" for about 2 seconds and then revert to show-
ing real time.
47
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
3. When the alarm time is set, the display will return to
showing real time and the colon will start to flash.
4. To verify the alarm time press the "
" button
to display the alarm time followed by the "Enter" but-
ton to return to real time mode.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
5. To cancel the alarm time, press the "
ton, the display will flash "
" but-
", press the "C"
button to cancel the alarm time.
Note:
1. When the alarm is sounding, press the"Power/Sleep"
button to turn off the alarm for 24 hrs.
2. The radio alarm will last for one hour if not turned off
by pushing the "Power/Sleep" button.
3. Tune the radio to the required station before setting
the alarm. When the alarm operates the radio will play
the last station selected.
Setting the HWS (Humane Wake System) alarm
A repeating beep tone will sound when using the HWS alarm. The alarm beep will increase in volume every 15
seconds for 1 minute followed by 1 minutes silence before repeating the cycle. The HWS alarm will sound for 30
minutes unless turned of by pushing the "Power/Sleep" button.
49
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
1. The HWS alarm is set in the same way as the radio
alarm except instead of pushing the" " but-
ton the " " button is used instead.
The HWS alarm may be turned off by pressing the
"Power/Sleep" button.
Note: The HWS alarm can be set independently from
the buzzer alarm enabling 2 alarm times to be set,
one for the radio alarm and one for the HWS alarm.
Setting the count down timer
The radio has a count down timer which can be set to
beep when the time set has elapsed. The count down
timer can be set with the radio power on or off.
1. If the radio is switched on press the "Display" button
to display the time.
2. Press the "Timer" button, the display will flash
"Timer".
50
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Enter the required time in hours and minutes (max 23
hours and 59 minutes) using the numbered buttons.
e.g. to enter 1 hour and 30 minutes, press the buttons
marked [1], [3], [0].
4. Press the "Enter" button, "Timer" in the display will
stop flashing indicating that the count down timer has
been set. After approximately 5 seconds the display
will revert to showing real time.
51
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
4. While the count down timer is active the time remain-
ing may be checked by pressing"Timer" button, press
the "Timer" button to continue with the time remain-
ing or press the "Enter" button to restart the count
down timer.
5. The count down buzzer will sound for 1 minute and
then turn off. The count down buzzer can be turned off
at any time by pressing the "Power/Sleep" button.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
6. To cancel the count down timer press the"Timer" but-
ton, and then press the "C" button, "Timer" on the
display will disappear and the display will revert to
showing real time.
Note:
1. When the count down alarm is active, press the
"Power/Sleep" button to turn off the alarm.
2. The count down alarm will sound for 1 minute unless
turned off by pushing the "Power/Sleep" button.
3. If an incorrect time is entered e.g. 25.30 the display
will show "E" for about 2 seconds before reverting to
showing real time.
53
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Setting the sleep timer
The sleep timer will automatically switch off the radio af-
ter a preset time has elapsed.
1. Press and continue to hold down the "Power/Sleep"
button the display will cycle through the available sleep
times in the order 60-45-30-15-60. Release the
"Power/Sleep" button when the required sleep time
appears in the display.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
2. The
symbol together with the sleep time set will
appear in the display for 2 seconds after which the
display will revert to showing frequency.
3. To cancel the sleep function, press the"Power/Sleep"
button, the
symbol will disappear and the display
will revert to showing real time.
55
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Mono/Stereo and DX/Local switch
1. To listen to FM stereo broadcasts, tune to the required
station, plug in headphones and set the"Mono/Stereo
switch located on the left side of the radio to the
"Stereo" position. If the station being received is weak
some hiss may be audible, to reduce the hiss set the
"Mono/Stereo" switch to the "Mono" position to re-
turn to mono operation.
Note: FM stereo is only available via headphones.
2. When listening to AM (MW/LW/SW) broadcasts, the
"DX/Local" switch adjusts the radios sensitivity. If you
are listening to a strong station and the signal is dis-
torted, set the"DX/Local" switch to the"Local"posi-
tion for best reception. For normal or weak stations
set the "DX/Local" switch to the"DX" position for maxi-
mum sensitivity.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Headphones
Headphones for use with this radio should be stereo and
fitted with a 3.5mm stereo jack plug. Insert the headphone
plug into the socket marked on the left side of the radio.
When the headphones are plugged in the loudspeaker
is automatically disconnected.
57
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Lock switch
The "Lock" switch is use to prevent unintentional op-
eration of the radio.
1. Set the "Lock" switch located on the right side of the
radio to the up position, the
symbol will ap-
pear in the display. The "Power/Sleep" and all other
buttons will be disabled. This will prevent accidental
operation when the radio is packed in a suitcase or
carrying pouch. To release the "Lock" switch move
the switch down, the
from the display.
symbol will be removed
Light
Pressing the light button located on the top of the radio
will turn on the light and and illuminate the display for
approximately 15 seconds.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Portable shortwave aerial
1. Pull out the jack plug from the aerial reel and plug into
the socket marked"AM EXT. ANT" located on the left
side of the radio. Uncoil the aerial to a convenient length
and attach the reel clip to a suitable support point.
MW step size switch
1. This switch located inside the battery compartment
provides a means of changing the MW step size from
9kHz to 10kHz. In Europe and most other parts of the
world set the switch to the 9kHz position. For the USA
and Canada set the switch to the 10kHz position.
59
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Reset button
If the radio fails to operate correctly, or some digits on
the display are missing or incomplete carry out the fol-
lowing procedure.
1. Switch off the radio and remove the batteries.
2. With the aid of a suitable implement (the end of a pa-
per clip) press the reset button located in the battery
compartment for at least 5 seconds, this will reset the
microprocessor, clock time and clear all stations stored
in preset memory (except SW).
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and maintenance
Do not allow this radio to be exposed to water, steam or
sand. Do not leave the radio where excessive heat could
cause damage such as in a parked car where the heat
from the sun can build up even though the outside tem-
perature may not seem too high.
If you need any further advice, please call our Technical Helpline on :-
61
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Specifications
Frequency range:
SW
1.711 - 29.999MHz
FM
87.5 - 108MHz
120m 2.300 - 2.495MHz
LW
MW
153 - 513kHz
90m
75m
60m
49m
41m
31m
25m
21m
19m
16m
13m
11m
3.200 - 3.400MHz
3.900 - 4.000MHz
4.750 - 5.060MHz
5.950 - 6.200MHz
7.100 - 7.350MHz
9.400 - 9.990MHz
11.600 - 12.100MHz
13.570 - 13.870MHz
15.100 - 15.800MHz
17.480 - 17.900MHz
21.450 - 21.750MHz
25.600 - 26.100MHz
520 - 1710 or 522 - 1710kHz
(dependent on position of MW step size switch)
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications cont.
Power requirements 4.5V
Output power:
Sockets
180mW.
Batteries
3 x IEC size LR6 (AA size)
Battery Life
Approx. 16-20hrs of listening
when used for 4 hours a day at
normal volume using alkaline bat-
teries.
Headphone socket
AM external aerial
DC in
3.5mm dia stereo.
3.5mm.
4.5volts centre pin negative.
Circuit features
Accessories:
Carrying pouch, Stereo ear-
phones, AC adaptor, Portable
shortwave aerial.
Semiconductors:
1 LSI, 10 IC's, 8 FET, 24 transis-
tors, 25 diodes, 2 LED
Aerial system
LW
MW
SW
FM
Built in ferrite aerial
Built in ferrite aerial
Telescopic aerial
Telescopic aerial
The company reserves the right to amend the specification without notice.
If you need any further advice, please call our Technical Helpline on :-
63
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Notes:
Download from Www.Somanuals.com. All Manuals Search And Download.
Guarantee
This radio is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty
workmanship or component breakdown, subject to the procedure stated below. Should any component or part fail
during this guarantee period it will be repaired or replaced free of charge.
The guarantee does not cover:
1. Damage resulting from incorrect use.
2. Consequential damage.
3. Receivers with removed or defaced serial numbers.
N.B. Damaged or broken telescopic aerials will not be replaced under guarantee.
Procedure:
Any claim under this guarantee should be made through the dealer from whom the instrument was purchased It is
likely that your Roberts dealer will be able to attend to any defect quickly and efficiently, but should it be necessary
the dealer will return the instrument to the company’s service department for attention. In the event that it is not
possible to return the instrument to the Roberts dealer from whom it was purchased, please contact Roberts Radio
service department at the address shown on the back page of this manual before taking further action.
These statements do not affect the statutory rights of a consumer.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
0181 758 0338 (Mon-Fri)
Imported by:-
ROBERTS RADIO LIMITED
PO BOX 130
MEXBOROUGH
SOUTH YORKSHIRE
S64 8YT
ROBERTS RADIO TECHNICAL SERVICES DEPARTMENT
97-99 Worton Road
Isleworth Middlesex
TW7 6EG
Technical Helpline :- 0181 758 0338
Issue 2
Download from Www.Somanuals.com. All Manuals Search And Download.
|