CR9936
Dual Alarm CD Clock Radio
With Night Light
Please read this manual before use
Download from Www.Somanuals.com. All Manuals Search And Download.
16 17 18 19 20 21
Controls
15
14
22
23
24
7
8
9
13
6
5
4
10
11
3
2
12
1
1. Night Light button
2. On/Off button
3. Sleep button
6. B.Skip/down button
7. Play/Pause button
8. F.Skip/up button
9. CD Stop button
11. CD display button
12. Time set button
13. Snooze button
14. Alarm 1 indicator
15. PMindicator
16. On indicator
21. Sleep indicator
17. FM stereo indicator
18. Programme indicator
19. Repeat indicator
20. Random indicator
22. Alarm 2 indicator
23. Auto dimmer
24. Dial pointer
4. Repeat button
5. CD mode button
10. Memory button
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Controls
27
26
30
31
32
28
25
29
33
30. Tuning control
31. Volume control
32. Function switch
25. Buzz/Music switch
26. Alarm 2 function switch
27. Alarm 1 function switch
28. Headphone socket
29. Night Light
33. Battery compartment (on underside)
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Switching on and setting the time
Before using your CD clock radio you must first set the correct time.
1. Place the unit on a flat surface. Plug the mains lead into a wall socket
and switch on the wall socket.
2. The clock display will show 12:00. Ensure that the Alarm 1 and
Alarm 2 function switches are set to the 'Off' position.
3. Press and hold down the Time Set button. The time will flash in
the display.
4. Whilst holding down the Time Set button press the up button to
set the hour and the down button to set the minutes. Release the
buttons when the correct time is reached. The clock uses a 12 hour
display with a PM indicator. Ensure that the correct 12 hour cycle
is selected.
2
2
3
4
4
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
4
02087580338(Mon-Fri)
Listening to the Radio
1. Switch on your CD clock radio by pressing the On/Off button. The
1
On indicator LED will light.
2. Slide the Function switch to the required waveband.
3. Tune in to the desired station by rotating the Tuning control. The
station frequency is indicated in the dial scale.
The Wire aerial located on the rear of your CD clock radio is for
FM reception. The wire should be fully extended and positioned for
optimum reception.
2
ForMWreceptionthereisabuiltinferriteaerial. RotateyourCDclock
radio to the position giving best reception.
4. Adjust the volume by rotating the Volume control.
3
5. When listening to FM stereo stations (Function switch in FM St.
position) and the station being received is weak, some hiss may be
audible. To reduce the hiss slide the Function switch to the FM
position. The stereo indicator will switch off and reception will be
in continue in mono.
6. The radio can be switched off by pressing the On/Off button. The
On indicator will switch off.
4
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Compactdiscs
Use only Digital Audio CDs which have the
symbol.
Never write on a CD or attach any sticker to the CD. Always hold the CD
at the edge and store it in its box after use with the label facing up.
To remove dust and dirt, breathe on the CD and wipe it with a soft, lint-
free cloth in a straight line from the centre towards the edge.
Cleaning agents may damage the CD
Do not expose the CD to rain, moisture, sand, or to excessive heat. (e.g.
from heating equipment or in motor cars parked in the sun).
CD-R/CD-RWdiscs
Your CD clock radio can playback CD-DA format audio CD-R/CD-RW
discs that have been finalised* upon completion of recording.
Your CD clock radio may fail to playback some CD-R/CD-RW discs due
to poor recording of the CD-R/CD-RW disc.
*Finalising enables a CD-R/CD-RW disc to playback on audio CD
players such as your CD clock radio.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
6
02087580338(Mon-Fri)
Inserting a CD
1
1. Press the On/Off button to switch on your CD clock radio. The On
indicator will light.
2. Set the Function switch to CD.
3. To open the CD compartment, lift the CD door on the rear edge as
shown.
4. Press the CD onto the spindle until it clicks into place. Close the CD
door. The CD player will scan the contents of the CD and the total
number of tracks will appear on the display.
2
3
CR 9936
Programm able CD Clock Radio
with Dual Alarm
down
up
Repeat
CD Mode
B.Skip
Play/Pause
F.Skip
CD Stop
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Playing a CD
1
1. Press the Play/Pause button to start playback. The display will
show the track number. After a short time the display will revert to
showing time.
2. Set the Volume control to the required setting.
3. To display the CD track number press the CD display button.
3
4. To pause playback press the Play/Pause button. The track
number will flash in the display. To resume playback press the Play/
Pause button again.
2
5. To stop playback, press the CD Stop button.
6. To take out the CD, lift the CD door on the rear edge and remove CD
from the spindle. The CD door should only be opened when the CD
is in Stop mode.
4
5
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
8
02087580338(Mon-Fri)
Selecting a track
1. Whilst the CD is playing, press either the F.skip or B.skip buttons
to change to the desired track. You can also skip tracks when the
player is in stop mode. Skip to the desired track using the F.skip or
B.skip buttons.
1
1
2. Press the Play/Pause button to play the selected track.
2
Search function
1. Whilst the CD is playing, press and hold down either the F.skip or
B.skip buttons. Release the button when the desired part of the
track is reached.
1
1
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CD repeat mode
1. Whilst the CD is playing press the Repeat button once to repeat
the current track. The Repeat indicator will flash.
2. Press the Repeat button again to repeat all tracks on the CD. The
1
Repeat indicator will light up.
3. Press the Repeat button again to return to normal play. The
Repeat indicator will switch off.
CD Random play
1. Press the CD Mode button to play all tracks on the CD in random
order. The Random indicator will light up. The tracks are played
in random order until all tracks have been played.
1
2. Press the CD Mode button again to return to normal play. The
Random indicator will switch off.
Warning
CLASS 1 LASER PRODUCT means that the laser's construction makes
it inherently safe so that the legally prescribed maximum permissible
radiation values can never be exceeded
CLASS 1
LASER PRODUCT
Caution: Using any equipment or devices other than those described
and specified in these operating instructions, or tampering with the unit
in any way, can result in dangerous exposure to radiation.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
10
02087580338(Mon-Fri)
Programmed play
1
By programming the player you can play up to 20 tracks in any desired
order.
1. Whilst the CD is in STOP mode, press the Memory button. The
display will show ‘ P 01’.
Note: the display will revert to showing time after 10 seconds of
inactivity.
2
2
2
2. Select the first track using the F.skip or B.skip buttons. The track
number will flash on the display. Store this track by pressing the
Memory button.
3
3. Repeat the above steps until you have completed your program
(maximum 20 tracks). Press the Play/Pause button to commence
play of the selected tracks.
Checking a programme
1. Whilst the CD is in STOP mode, repeatedly press the Memory
button to step through the tracks programmed.
1
Erasing a programme
1. Whilst the CD is in STOP mode, press the Memory button. The
Prog. indicator will flash.
2
1
2. Press the CD Stop button to erase the programme. Programmes
are also erased by opening the CD door, changing position of the
Function switch and interrupting the mains supply.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Setting alarm times
The alarms can be set to wake you by a buzzer, CD or the radio. Your
CD clock radio has 2 separate alarms which can be set to activate at
different times.
Setting alarm 1
1. Slide the Alarm 1 function switch to the 'Adj' position. Alarm 1 time
1
will flash in the display.
2. Press the down button to set minutes and the up button to set the
hour. Release the buttons when the correct time is reached. Alarm
1 time will continue to flash in the display. The clock uses a 12 hour
display with a PM indicator. Ensure that the correct 12 hour cycle
is selected.
2
2
3. Return the Alarm 1 function switch to the 'Off' position. The
display will revert to showing time.
3
Note: Incorrect display will result if both the Alarm function switches
are set to the 'Adj' position.
Setting alarm 2
1. Slide the Alarm 2 function switch to the 'Adj' position. Alarm 2 time
will flash in the display.
2. Press the down button to set minutes and the up button to set the
hour. Release the buttons when the correct time is reached. Alarm
2 time will continue to flash in the display. The clock uses a 12 hour
display with a PM indicator. Ensure that the correct 12 hour cycle
is selected.
1
2
2
3. Return the Alarm 2 function switch to the 'Off' position. The
3
display will revert to showing time.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
12
02087580338(Mon-Fri)
Checking the Alarm Times
1. To check alarm 1 time, set the Alarm 1 function switch to the 'Adj'
position. Alarm 1 time will flash in the display.
2. Return the Alarm 1 function switch to the 'Off' position. The
1
display will revert to showing time.
3. To check Alarm 2 time, set the Alarm 2 function switch to the 'Adj'
position. Alarm 2 time will flash in the display.
4. Return the Alarm 2 function switch to the 'Off' position. The
display will revert to showing time.
2
Note: Incorrect display will result if both the Alarm function switches
are set to the 'Adj' position.
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Setting the alarms to wake to buzzer
1. Set the alarm time as previously described. Set the Alarm mode
1
2
switch to the 'Buzz' position.
2. Set the Alarm 1 or Alarm 2 function switch to the 'On' position.
The corresponding Alarm indicator will light.
3. Press the On/Off button to switch off your CD clock radio, the On
indicator will switch off.
4. The buzzer alarm will sound every day at the preset time for 90
minutes. To switch off the alarm until the next day press the On/Off
button.
5. To switch off the alarms permanently set the Alarm 1 or Alarm
2 function switch to the 'Off' position.
Note: Alarm 1 has a low tone Alarm 2 has a high tone.
3
4
5
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
14
02087580338(Mon-Fri)
Setting the alarms to wake to radio
1. Set the alarm time as previously described. Set the Alarm function
switch to the 'Music' position.
2. Set the Alarm 1 or Alarm 2 selector switch to the 'On' position.
1
2
The corresponding Alarm indicator will light.
3. Select the required waveband and ensure that a station is tuned in
4. Set the Volume control to the desired level.
5. Press the On/Off button to switch off your CD clock radio, the On
indicator will switch off.
6. The radio alarm will sound every day at the preset time for 90
minutes. To switch off the alarm until the next day press the On/Off
button.
7. To switch off the alarms permanently set the Alarm 1 or Alarm
3
4
3
2 function switch to the 'Off' position.
5
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Setting the alarms to wake to CD
1. Set the alarm time as previously described. Set the Alarm function
switch to the 'Music' position.
1
2. Set the Alarm 1 or Alarm 2 selector switch to the 'On' position.
2
The corresponding Alarm indicator will light.
3. Set the Function switch to the 'CD' position, insert a CD and ensure
that the Volume control is set to the desired level.
4. Press the On/Off button to switch off your CD clock radio, the On
indicator will switch off. Important: failure to switch off the
unit will result in non operation of the CD at alarm time.
5. The CD will play every day at the preset time for a maximum of 90
minutes. To switch off the alarm until the next day press the On/Off
button.
3
3
6. To switch off the alarms permanently set the Alarm 1 or Alarm
2 function switch to the 'Off' position.
4
5
6
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
16
02087580338(Mon-Fri)
Setting the alarm to wake to CD programme
1. Set the alarm to wake to CD as previously described.
3
2. Programme your favourite tracks as described earlier.
3. Press the Play button followed by the CD Stop button.
4. Press the On/Off button to switch off your CD clock radio, the On
indicator will switch off. Important: failure to switch off the
unit will result in non operation of the alarm.
3
5. The CD will switch on at the preset time and play tracks in the order
programmed.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Snooze control
1. The buzzer, CD or radio alarm can be silenced for 6 minutes by
pressing the Snooze button. This sequence can be repeated during
the 90 minute alarm period.
1
Sleep timer
1. CD or radio playback can be set to switch off automatically after a
preset time has elapsed.
4
2
2. Repeatedly press and release the Sleep button until the desired time
is reached (maximum 90 minutes in 30 minute steps). The Sleep
indicator will light up and after a few seconds the radio if selected
will play. If CD has been selected press Play button and CD will
play for the time selected sleep time.
3. The CD or radio will switch off after the sleep time has elapsed.
4. To cancel the sleep function before the preset time has expired,
press the On/Off button.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
18
02087580338(Mon-Fri)
Auto Dimmer
1. The Auto Dimmer located on the right side of the tuning dial will
automatically adjust the intensity of the clock display to suit room
brightness.
1
Night light
1. Press the Night Light button to adjust level of night light, press once
1
for dim light press once again for bright light and once again to switch
off.
The night light located around the base of your CD clock radio will
provide a warm glow adequate to allow you to move safely around
the room.
Headphones
1. A Headphone Socket (3.5mm) located on left side is provided for
use with either headphones or an earpiece. Inserting a plug
automatically mutes the internal loudspeaker.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Specifications
Power Requirements
Mains
Circuit Features
Loudspeakers
2 x 8 ohms
AC 230 volts, 50Hz
only
Output power 2 x 1.5 Watts
Back-up Battery
IEC size 6LR61 (6F22, PP3)
Aerial System
FM
Wire Aerial
Frequency Coverage
FM
87.5 - 108MHz
520 - 1610kHz
MW
Built-in Ferrite aerial
MW
Warning
CLASS 1 LASER PRODUCT meansthatthelaser'sconstructionmakesitinherentlysafesothatthelegallyprescribedmaximumpermissibleradiation
values can never be exceeded
Caution: Using any equipment or devices other than those described and specified in these operating instructions, or tampering with the unit
in any way, can result in dangerous exposure to radiation.
The Company reserves the right to amend the specification without notice.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
20
02087580338(Mon-Fri)
General
Fuse
Do not allow this unit to be exposed to moisture (e.g. dripping or
splashing) or to temperatures exceeding 70 degrees centigrade. It is
recommended that the FM band be used wherever possible as better
results in terms of quality and freedom from interference will usually be
obtained than on the MW band.
This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug
(BS1363). If another type of plug is used a 5A fuse should be fitted in
the plug, adaptor or distribution board.
IFINDOUBT-CONSULTAQUALIFIEDELECTRICIAN.
Back-upBattery(notnecessaryfortheunittofunction)
Mainssupply
Slide the battery cover catch in the direction of the arrow. Open the
batterycover.Fita9voltIECsize6LR61(6F22,PP3)orequivalentbattery
into the compartment. Observe the correct polarity as shown on battery
cover.
The CR9936 will operate from a supply of AC 230volts, 50Hz
only.
For your convenience this product is supplied with a plug which is fitted
with a fuse of the appropriate rating. If the plug supplied is not suitable
for your socket outlet, it should be removed by unscrewing the plug top,
the terminal screws and removing the cable.
The time and alarm settings will be retained during a temporary failure
of the AC mains supply. The LED display will not be operational. The
display will be extinguished to conserve battery life, but the memory will
retain details of the time and alarm time settings.
The correct style of plug to suit your household together with a correctly
rated fuse should be fitted.
IFINDOUBT-CONSULTAQUALIFIEDELECTRICIAN
If your clock radio is not to be used for a prolonged period of time, remove
the battery to avoid damage by battery leakage.
IMPORTANT. DO NOT make any connection to the larger terminal which
is marked with the letter E or by the safety earth symbol
Green or Green-and-yellow.
or coloured
(Underside)
The Nameplate is located
on the underside of your
CD clock radio.
The wires in the mains lead are coloured in accordance with the
following codes :-
BLUE - NEUTRAL
BROWN - LIVE
As these colours may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:-
The wire coloured BLUE must be
connected to the terminal marked N
or coloured BLACK.
The wire coloured BROWN must be
connected to the terminal marked L
or coloured RED.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Guarantee
This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component
breakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or replaced
free of charge.
The guarantee does not cover:
1. Damage resulting from incorrect use.
2. Consequential damage.
3. Receivers with removed or defaced serial numbers.
Procedure:
Any claim under this guarantee should be made through the dealer from whom the instrument was purchased. It is likely that your Roberts' dealer
will be able to attend to any defect quickly and efficiently, but should it be necessary the dealer will return the instrument to the company’s service
department for attention. In the event that it is not possible to return the instrument to the Roberts' dealer from whom it was purchased, please
contact Roberts Radio Technical Services department at the address shown the rear of this manual before taking further action.
These statements do not affect the statutory rights of a consumer.
If you need any further advice, please call our Technical Helpline on :-
Download from Www.Somanuals.com. All Manuals Search And Download.
22
02087580338(Mon-Fri)
ROBERTS RADIO TECHNICAL SERVICES
97-99WortonRoad
IsleworthMiddlesex
TW76EG
Technical Helpline:- 020 8758 0338 (Mon-Fri)
Issue 1
Download from Www.Somanuals.com. All Manuals Search And Download.
|