Roadmaster Speaker RS525 User Guide

RS525  
One Pair 51/4”  
Three-Way Speakers  
Installation  
Frequently Asked Questions  
What if there is no sound?  
1. Your stereo may have a blown fuse. Replace fuse with the same amperage and  
style.  
2. You may have improper wiring. Refer to the wiring guide that came with your stereo/  
amplier. Check all wires for a secure connection.  
Location  
Dear Customer,  
If you are installing the RS525 speakers to upgrade/replace your existing speakers, re-  
move the existing speakers from your vehicle, disconnect the speaker wires and mark  
the polarity. Place the RS525 speakers in the location you selected in your vehicle and  
connect the existing speaker wires. Make sure to keep the polarity of the speakers and  
wires correct (positive wire to positive speaker terminal and negative or ground wire  
CONGRATULATIONS.  
1
The RS525 5 /4” 3-way speakers, when used as described, will give you years of de-  
pendable service in your car, truck, RV or mini-van. We have taken numerous measures  
in quality control to ensure that your product arrives in top condition, and will perform  
What if the sound volume is low?  
Your stereo may not have enough power, you may have to install an amplier to  
drive the speakers  
1
to your satisfaction. In the rare event that your RS525 5 /4” 3-way speakers contain a  
to negative terminal)  
damaged or missing item, does not perform as specied, requires warranty service, or  
you have an installation problem, DO NOT RETURN THIS PRODUCT TO THE STORE.  
PLEASE CALL OUR TOLL FREE NUMBER FROM THE U.S.A. AND CANADA 1-800-  
445-1797 and ask to speak with a member of our technical service team, or submit your  
questions by E-Mail to [email protected] and a member of our technical  
service team will respond by e-mail to your questions. Our in-house technical service  
team will expedite delivery of your part, advise you on installation, or help troubleshoot  
a problem with you. If your product needs warranty service, our technical service team  
representative will help you obtain the fastest remedy possible under the warranty.  
Speaker Depth  
2.0 in or 5.1 cm.  
Why do I have a whining noise coming from the speakers?  
You may have poor ltering of your alternator. If that is the case then you  
may need to add an alternator lter to the power lead.  
Before you install your speakers you must make sure you  
have enough depth/space behind the mounting surface.  
You do not want the back of the speaker magnet to touch any part  
of your vehicle, or interfere with the operation or function of any  
component in your vehicle. (ie. windows or trunk lid)  
Why do I have odd sounding noises coming from the speakers?  
You may have corroded battery terminals and/or a weak battery. If the terminals on  
the battery are corroded clean them, then check the sound. If the sound system is still  
making noises check battery strength. If it is low, recharge or replace the battery.  
Mounting  
Why does the speaker have sound coming from one channel only?  
First make sure the balance control is set correctly. If the balance is set correctly  
your stereo may be defective or the speaker may be defective. To troubleshoot  
this problem you MUST change both positive and negative leads of each channel with  
the positive and negative leads of the opposite channel, if the same speaker has no  
sound then the speaker is no good, if the opposite speaker has no sound then your  
stereo may be defective.  
You should only mount your speakers in factory precut holes. We  
DO NOT recommend that you cut holes for mounting the speakers. If  
there are no factory precut holes consider having the speakers pro-  
fessionally installed.  
Parts & Specications  
• Polypropylene Sprayed Cones  
• 6 oz. Magnet per Speaker ±10%  
• Foam Surrounds  
• 100 Watts Maximum Peak Power Per Pair  
• 20 Watts RMS per Pair  
• 115 - 20,000 Hz Frequency Response  
• Mylar Midrange speakers  
• Button Tweeters  
• Quick Release Terminals  
The small hole of  
the spring nut is  
on this side of panel  
1. Connect the speaker wires to  
the speaker. Maintain polarity by  
connecting the positive wire to the  
positive speaker terminal, and the  
negative wire to negative speaker  
terminal.  
INTERIOR PANEL  
GIVE US A CALL, WE'LL HELP YOU INSTALL.  
2 Speakers  
PLEASE DO NOT RETURN PRODUCT TO STORE.  
Visit us on the WEB  
For Information and Technical Assistance,  
Call Toll-Free in U.S.A. and Canada.  
SPRING NUT  
2. Slip the supplied spring nuts into  
place and align the holes.  
1-800-445-1797  
2 Grills  
8 Screws  
8 Spring Nuts  
SPEAKER  
WIRE  
Limited Warranty  
SPEAKER GRILL  
Spring Nut  
VIRTUAL REALITY SOUND LABS® products are designed and manufactured to provide a high level of trouble-free performance.  
VIRTUAL REALITY SOUND LABS® warrants, to the original purchaser, that its products are free from defects in material and  
workmanship for 30 days from the date of original purchase. As part of our commitment to product excellence, VIRTUAL REALITY  
SOUND LABS®and/or its afliates routinely improve the designs, materials or production methods of its existing products. Because  
it is impractical to publicize all changes in every product, we reserve the right to make such changes without notice.  
CONDITIONS OF WARRANTY:  
Tools Needed To Install  
3. Screw the speaker into  
place with screws (provided).  
If during the 30 day warranty period your new product is found to be defective, VIRTUAL REALITY SOUND LABS® will repair such  
defect, or replace the product, without charge for parts or labor subject to the following conditions:  
1. All repairs must be performed by VIRTUAL REALITY SOUND LABS® and/or its afliates in Eatontown, New Jersey.  
2. The equipment must not have been altered or been damaged through negligence, accident, or improper operation.  
3. The replacement of parts are exempted from this warranty when replacement is necessary due to normal wear and tear.  
4. All warranty claims must be accompanied by a copy of the sales receipt or bill of sale.  
• Marker/Pen  
4. Firmly attach the speaker  
grill cover.  
• Nail Set/Center Punch  
• Phillips Screwdriver  
• Wire Cutter  
Maintain proper polarity by attaching the  
Positive Wire(+) to Positive Terminal(+)  
and the Negative Wire(-) to Negative  
Terminal(-)  
• Electric Drill  
with 1/16" bit  
5. Repair or replacement parts supplied by VIRTUAL REALITY SOUND LABS® under this warranty are protected only for the unexpired por-  
tion of the original warranty.  
• Hammer  
• Safety Glasses  
• Electrical Tape  
6. In the case of car stereos, this warranty does not extend to the elimination of car static or motor noise; correction of antenna  
problems; costs incurred for the removal or reinstallation of the product; damage to tapes, speakers, accessories or car electrical  
systems.  
Speaker wires with female disconnects on  
one end are recommended. When connect-  
ing the speaker wires to your speakers in a  
new installation, you should follow the wiring  
instructions from your audio system’s manu-  
facturer.  
Attach the quick disconnect connectors to  
the speaker terminals as shown. Maintain  
proper polarity by attaching the Positive  
Wire(+) to Positive Terminal(+) and the Nega-  
tive Wire(-) to Negative Terminal(-).  
7. VIRTUAL REALITY SOUND LABS® will not be responsible for any charge incurred for installation.  
OWNER’S RESPONSIBILITIES:  
Before You Install  
VIRTUAL REALITY SOUND LABS will make every effort to provide warranty service within a reasonable period of time.  
SHOULD YOU HAVE ANY QUESTIONS ABOUT SERVICE RECEIVED, OR IF YOU WOULD LIKE ASSISTANCE IN OBTAINING SER-  
VICE, PLEASE CALL TOLL FREE 1-800-445-1797, 8:30am - 4:30pm EST.  
In order to provide you with the proper warranty service, we request that you adhere to the following procedure:  
1. Include a copy of your sales receipt or bill of sale with your unit when it is returned for warranty service.  
2. If it is necessary to return your product for service, please return it securely packed, preferably in the original shipping carton,  
and freight and insurance prepaid to the following address: VIRTUAL REALITY SOUND LABS, Service Department, 41 James Way,  
Eatontown, New Jersey 07724.  
We understand that automotive audio equipment installations can be challenging at  
times, even to the most experienced of installation technicians. If you are not con-  
dent working with electrical wiring, removing and reinstalling interior panels, carpet-  
ing, dashboards or other components of your vehicle, please call our TOLL-FREE help  
line 1-800-445-1797 and our in-house technical service team will answer your instal-  
lation questions.  
3. Please include a detailed explanation of the problem you are having.  
4. If your product is found by VIRTUAL REALITY SOUND LABS® to have a defect in material or workmanship, within the warranty  
period, it will be repaired or replaced at no charge and returned to you prepaid. Where permitted by Iaw VIRTUAL REALITY SOUND  
LABS® liability shall be limited to that set forth in this warranty. This warranty shall be the exclusive remedy of the purchaser.  
VIRTUAL REALITY SOUND LABS® makes no other warranty of any kind, expressed or implied; and all implied warranties, are  
hereby disclaimed by VIRTUAL REALITY SOUND LABS® and excluded from this warranty, VIRTUAL REALITY SOUND LABS® and/  
or its afliates, the manufacturer, distributor and seller shall not be liable for any injury, loss or damage, incidental or consequential,  
arising out of the use or intended use of the product.  
Before installing these speakers, check the vehicle’s manual for locations of  
important vehicle components such as air bags, CO2 systems, fuel systems,  
& electrical systems installed in the vehicle. Accidental deployment of air bags  
may result in serious injury.  
For most systems the positive wire attaches  
to the positive speaker terminal and the neg-  
ative wire attaches to the negative terminal.  
©2008 Intellectual Solutions Inc., All rights reserved. All designs, logos and images are the exclusive property of Intellectual Solutions  
Inc. and/or its afliates. U.S. and Foreign Patents Pending. 072908 Printed in China 00000  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pyramid Technologies Power Supply PS 14K User Guide
Radio Shack Marine Radio 21 1706 User Guide
Renesas Network Card M3T F160 EXTC User Guide
Samson GPS Receiver MDR 6 User Guide
Samsung Laptop NP900X3C A01US User Guide
Samsung Laptop R70 User Guide
Samsung Microwave Oven SMH7174 User Guide
Sanyo Battery Charger N 1000SCR User Guide
Sanyo CD Player FXCD 500 User Guide
Seagate Computer Drive ST980811A User Guide