VRBT300V
Operation
Operation
Hands-Free Car Kit
INSTALLATION
To install the VRBT300V, attach to the visor of your vehicle using the clip on the rear of
the unit.
CALL LOG BOOK
Note: The Call Log Book feature DOES NOT access the cell phone’s Call Log Book.
1. Press the 3-Way button once to enter the Call Log menu. The three call log catego-
ries are: Missed Calls -> Dialed Calls -> Received Calls in that order.
2. Move the 3-Way button to the LEFT or RIGHT to navigate the three logs.
3. Press the 3-Way button once to enter each log.
4. After you enter a Call Book Log, move the 3-Way button to the LEFT or RIGHT to
navigate through the phone numbers. Press the Multi-Function Button to call the high-
lighted phone number.
Dear Customer,
CHARGING
CONGRATULATIONS. The VRBT300V Bluetooth® Hands-Free Cell Phone Car Kit al-
lows the driver to make voice calls hands-free via their Bluetooth® mobile phone. When
used as described, the VRBT300V will give you years of dependable service in your car,
truck, RV, or mini-van. We have taken numerous measures in quality control to ensure
that your product arrives in top condition and will perform to your satisfaction. In the
rare event that your VRBT300V Bluetooth® Hands-Free Cell Phone Car Kit contains a
damaged or missing item, does not perform as specified, requires warranty service, or
you have an installation problem, DO NOT RETURN THIS PRODUCT TO THE STORE.
PLEASE CALL OUR TOLL FREE NUMBER FROM THE U.S.A. AND CANADA 1-800-
445-1797 and ask to speak with a member of our technical service team; or submit your
will respond by e-mail to your questions. Our in-house technical service team will expe-
dite delivery of your part, advise you on installation, or help troubleshoot a problem with
you. If your product needs warranty service, our technical service team representative
will help you obtain the fastest remedy possible under the warranty.
Insert the mini USB connector of the charging adaptor into the mini USB charging port
of the VRBT300V, then insert the 12 Volt adaptor end into the vehicle’s cigarette lighter
socket or 12 Volt Power Port. If the unit is ON, it will automatically shut OFF when you
start charging and the Red LED will come on to indicate the unit is charging. When the
VRBT300V is fully charged, the Red LED will go off.
LOW BATTERY WARNING
When the VRBT300V battery is low, the Blue LED will be off, the Red LED will flash, and
the speaker will make a BEEP sound.
5. Press the Cancel Button to quit the Call Log Book.
CALL LOG DISPLAY
Within the Call Log Books, each number is preceded by a single digit number (0-5) and a
space to designate the order the calls were received. “0” is the most recent number; “1”
is the next number and so on, up to “5”.
POWER ON AND OFF
Press and hold the Multi-Function Button until you hear a short BEEP and HELLO is
displayed on the LCD. When the VRBT300V is in standby mode, press and hold the
Multi-Function Button for 3 seconds to turn the unit off. You will hear a long BEEP and
both LED lights will turn off.
RECONNECT TO CELL
1. If the VRBT300V loses connection by moving out of operating distance of the paired
cell phone, reconnect by moving it within the operating area and press the Multi-Func-
tion button once to reconnect to the cell phone.
2. If the VRBT300V is disconnected because of being powered off, it will connect auto-
matically after powering on again.
MULTI-FUNCTION BUTTON
POWER - Press and hold until you hear a beep and HELLO appears on the LCD.
PAIRING - Press and hold until you hear 2 beeps and the buttons alternately flash ON
& OFF.
ANSWER A CALL - Press once
RE-DIAL - Press two times or more, depending on your phone’s features.*
VOICE ACTIVATED DIALING - Press once*
CALL TRANSFER - Press once to transfer to VRBT300V
Press and hold for 3 seconds to transfer to cell phone
MUTE - Press and hold for 3 seconds
Features & Functions
WARNING: The user MUST read the instructions in full, and successfully operate
the VRBT300V with a cell phone before using in the car.
STORAGE CONDITONS
Operating Temperature Range 0°C to +50°C (32° to 122°F) without loss of function.
Storage Temperature Range: - 20°C to +65°C (-4° to 149°F) without any damage.
Humidity Range: 30%-90% humidity
Headphone Jack
Three Way Button
EARBUD
Insert the earbud’s plug into the headphone jack on the side of the VRBT300V.
Use the Earbud for privacy or high ambient noise situations.
THREE WAY BUTTON
Cancel Button
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modification to this device are not approved by the party
responsible for compliance and will void the warranty and user’s
authority to operate this device.
VOLUME - Move the 3-Way button to the right to increase, or move the 3-Way button
to the left to decrease.
*Note: Please refer to your cell phone’s prod-
uct user manual for Voice Dialing, Call & Redial
functionality and settings.
Multi-function Button
CALL WAITING* - With a call in progress you will hear 2 short tones, then:
1. Press and hold the 3-Way button to the right for 3 seconds to put the current call on
hold and answer the waiting call.
Note: To cancel the second call and return to the “call on hold”, press the cancel but-
ton once.
2. Press and hold the 3-Way button to the left for 3 seconds to cancel the current call
and answer waiting call.
MUTE - Press and hold for 3 seconds to Mute or Unmute.
ENTER CALL LOG BOOK - Press Once
Mini USB
Charging Port
With Cover
ICONS
When the VRBT300V com-
pletes a Bluetooth® con-
nection, the Bluetooth®
icon will be on.
A solid Battery Power Lev-
el Icon will display when
the battery is full; One line
on Battery Power Level
icon will display when the
battery is half full; only the
battery frame will remain
when the battery is dis-
Visor Clip
When opening the Call
Logs, the Call Log Book
icon will be on.
TO CHOOSE A CALL LOG BOOK - Move to Left or Right
Front of Unit
CANCEL BUTTON
END CALL - Press Once
REJECT CALL - When you are on a previous call, press once to reject an incoming call.
EXIT CALL LOG BOOK - Press Once
Adjustable LCD Screen
charged.
When entering the Re-
When there is an incoming
call, the Incoming Call icon
will be on while the backlit
LCD flashes
ceived Call Log, the Re-
ceived Call icon on the
LCD and the Call Log Book
icon will be on.
PAIRING WITH A BLUETOOTH® ENABLED CELL PHONE
Earbud
1. The VRBT300V and the Bluetooth® enabled cell phone should be within a distance
of 3 feet (1 meter).
The Missed Call icon
will be on when a call is
missed and until that call is
acknowledged.
2. With the VRBT300V OFF, press and hold the Multi-Function button until you hear 2
beeps. The Red & Blue LEDs will flash indicating the unit is ready to be paired.
3. The Bluetooth® cell phone will search for nearby Bluetooth® devices. The cell phone
will display the “VRBT300V” in the list of Bluetooth® devices. If you are using a “dongle”
type Bluetooth® adaptor, follow the manufacturer’s instructions for that device.
4. Select “VRBT300V” to add this Bluetooth® device into the list of paired devices.
5. Enter in the PIN Code “0000” and your mobile phone will show that pairing is com-
plete.
When entering the Dialed
phone numbers in the
Phonebook, the Outgoing
Call icon on the LCD and
the Call Log Book icon will
be on.
Mini USB
Charging Port
With Cover
Side of Unit
12 Volt Adaptor With Mini Usb Plug
When checking a phone
number in the Missed Call
Log, the Missed Call icon
and the Phonebook icon
will be on.
IMPORTANT INFORMATION & PRODUCT MAINTENANCE
• Store in a cool, dry place; use clean soft cloth to clean the surface of Bluetooth® car kit.
• Do not expose to high or extremely low temperatures, or to dust.
6. If pairing is successful, user will hear a long BEEP and the Blue LED(cancel) will flash
about every 3 seconds.
• Do not open VRBT300V. Non-professional maintenance may cause damage, and will void the warranty.
• Do not operate the VRBT300V roughly, e.g knocking, bumping.
• Do not short circuit the charging port of the VRBT300V; a short circuit will cause damage to the battery.
• Use original accessories only; any damage caused by using other accessories will void the warranty.
• If the VRBT300V does not turn on, please recharge the battery.
CALLER ID DISPLAY
®
©2008 Intellectual Solutions Inc., All rights reserved. The Bluetooth word mark and logo are owned by the Bluetooth SIG, Inc. and any use
of such marks is under license. Other trademarks and trade names are those of their respective owners. All designs, logos and images are the
exclusive property of Intellectual Solutions Inc. and/or its affiliates. U.S and Foreign Patents Pending. 041008 Printed in China 00000
The LCD will flash ON & OFF while displaying the phone number of the incoming call.
The phone number of the incoming call will be displayed on the LCD.
Download from Www.Somanuals.com. All Manuals Search And Download.
|