Ricoh Digital Camera RDC 300Z series User Guide

RDC-1 through  
RDC-300Z series  
Windows XP  
Installation Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. End User License Agreement  
The following is a legal software license agreement between you, the software end user, and Ricoh Company  
Ltd. Carefully read this license agreement before using the product. Using the product indicates that you have  
read this license agreement and agree to its terms.  
Grant of License  
This license permits you to use one copy of the software included in this package on any single computer. For  
each software licensee, the program can be “in use” on only one computer at any given time. The software is  
“in use” when it is either loaded into RAM or installed into the hard disk or other permanent memory. A special  
license permit from Ricoh is required if the program is going to be installed on a network server for the sole  
purpose of distribution to other computers.  
Copyright  
The software contained in this package is owned and published by Ricoh, and is protected by United States  
copyright laws, international treaty provisions, and all other applicable national laws. The software must  
be treated like all other copyrighted materials (e.g. books and musical recordings). This license does not  
allow the software to be rented or leased, and the written materials accompanying the software (if any)  
may not be copied.  
Limited Warranty  
Ricoh warrants that the software contained herein will perform substantially in accordance with the accompa-  
nying documentation.  
No Other Warranties  
Ricoh disclaims all other warranties, expressed or implied, including but not limited to implied warranties of  
merchantability and fitness for a particular purpose, with respect to the Software, and the accompanying  
written materials.  
No Liability for Consequential Damages  
In no event shall Ricoh or the suppliers be liable for any damages whatsoever (including but not limited  
to damages for loss of business profits, business interruption, loss of business information, or any other  
pecuniary loss) which results from an inability to use this software, even if Ricoh has been advised of the  
possibility of such damages. Because some states/jurisdictions do not allow the exclusion or limitation of  
consequential or incidental damages, the above limitations may not apply to you.  
U.S. Government Restricted Rights  
The Software and documentation are provided with Restricted Rights. Use, duplication, or disclosure by  
the U.S. Government is subject to restrictions as set forth in subparagraph c (1) (ii) of the Rights in  
Technical Data and Computer Software clause at DFARS 252.227-7013, or subparagraphs c (1), (2), and  
(3) of the Commercial Computer Software - Restricted Rights at 48 CFR 52.227-19, as applicable, and  
any amendments thereto. The manufacturer is Ricoh Company Ltd., 3-2-3, Shin-yokohama, Kohoku-ku,  
Yokohama-shi, 222-8530, Japan.  
If this product was purchased in the United States, this Agreement is governed by the laws of the state of  
California; otherwise, local laws may apply.  
Copyright © 2002, Ricoh Co., Ltd.  
RDC-1 through RDC-300Z series Windows XP Installation Guide - 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Important notes  
These instructions will guide you through the process of installing the RDC-1 through RDC-300Z series USB  
driver and utility software on your Windows XP computer. Be sure to read, understand, and observe all  
precautions and requirements prior to attempting these procedures. If you feel you need assistance, please  
contact our customer support network at the URL listed in the Customer support section below.  
• Operating System: Windows XP (operation not guaranteed with other operating systems)  
• Memory: 128MB or more (256MB or more is recommended)  
• Connection cable: Use the dedicated cable included in the package  
• Retrofit USB ports added by using an expansion feature (such as PCI bus) cannot be supported.  
• Driver may fail to operate correctly when used with a USB hub or other USB devices.  
3. Customer support  
The following URLs may be useful if you need support during the installation process.  
Download Windows XP-compatible software  
Contact Ricoh’s customer support team  
4. Installing the utility software  
Note: The authority to install this software to Windows XP is limited to users with administrator accounts.  
Users who cannot log on as administrators will not be able to install this software.  
I. Prior to installation  
(1) Download the latest RDC-1 through RDC-300Z series software at the URL above. Be sure to note the  
location where you save the downloaded files.You will need that information during the installation. Also,  
be sure to save the downloaded files to your computer’s hard drive.  
(2) Save any important data you may be using and then quit all running applications.  
(3) Disconnect any other USB or Plug & Play devices.  
II. Installation procedure  
Before connecting the RDC-1 through RDC-300Z series to your computer  
(1) Browse to the folder where you saved the downloaded files.  
(2) Click on the setup.exe icon to start the installation process.  
(3) Click Next at the Welcome screen.  
(4) Click Next at the Choose Destination Location window to  
accept the default location or Browse to select a different  
location. (See Figure 1.)  
(5) Click Next to proceed past the Information screen.  
Figure 1: Choose Destination Location  
4 - RDC-1 through RDC-300Z series Windows XP Installation Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After connecting the RDC-1 through RDC-300Z series to your computer  
(1) Turn the camera mode dial to Playback and open the LCD  
display to start the camera.  
(2) Click on the Start button and select “DU-4 for Windows95”  
from the All Programs menu.  
(3) In the screen that appears, make sure to select the correct  
Type of Camera, Communication Speed, and COM Port  
before proceeding. (See Figure 2.)  
(4) Choose the option that best suits your needs from among Copy  
from camera, Copy to camera, Camera control, or Thumbnail  
list.  
Figure 2: The DU-4 main menu  
5. Installing the TWAIN driver  
(1) Browse to the folder where you stored the downloaded files.  
(2) Click on the twainnew icon to start the setup process. A number of new files will appear.  
(3) Click on the setup icon.  
(4) Click on the Next button when the Welcome screen appears.  
(5) Select 32bit version, then click Next.  
(6) Click Yes if you would like to read the accompanying README file or No if you would not.  
6. Uninstalling the RDC-1 through RDC-300Z series utility software  
(1) Click on the Add or Remove Programs icon in your Control Panel.  
(2) Select the DU-4 utility and click Change/Remove. (See Figure 3.)  
(3) Click Yes to confirm that you want to uninstall this software.  
(4) Click OK when the unInstallShield finishes.  
Figure 3: Remove DU-4  
RDC-1 through RDC-300Z series Windows XP Installation Guide - 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  

RedMax Blower EBZ5100Q User Guide
RightWay GPS Receiver RW 355 User Guide
Royal Sovereign Laminator PL 922 User Guide
Samsung All in One Printer SCX 6555N Series User Guide
Samsung Blu ray Player BD C7500 User Guide
Samsung Cell Phone 07202010 User Guide
Samsung Computer Drive BG68 01525A User Guide
Samsung Tablet GH88 41012A User Guide
Samsung Telephone SCH a600 User Guide
Sears Electric Heater 583356 User Guide