Renesas Network Card R0E33062PMSRC0 User Guide

R0E33062PMSRC0  
Emulation Memory Board for M16C/60 Series Compact Emulator  
User's Manual  
Keep safety first in your circuit designs!  
z Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products  
better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to  
personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with  
appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention  
against any malfunction or mishap.  
Notes regarding these materials  
z These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited  
to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to  
Renesas Technology Corporation, Renesas Solutions Corporation or a third party.  
z Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of  
any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application  
examples contained in these materials.  
z All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information  
on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and  
Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that  
customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product  
distributor for the latest product information before purchasing a product listed herein. The information described here may contain  
technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no  
responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information  
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home  
page (http://www.renesas.com).  
z When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and  
algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the  
information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any  
damage, liability or other loss resulting from the information contained herein.  
z Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under  
circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions  
Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any  
specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.  
z The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or  
reproduce in whole or in part these materials.  
z If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from  
the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport  
contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.  
z Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the  
products contained therein.  
Precautions to be taken when using this product  
z This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your  
program you have finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing  
integration test, evaluation, or some experiment else.  
z In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.  
z Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge.  
However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any  
circumstances.  
z This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not  
fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when  
used in Japan.  
WARNING indicates a potentially dangerous situation that will cause  
death or heavy wound unless it is avoided.  
WARNING  
CAUTION indicates a potentially dangerous situation that will cause  
a slight injury or a medium-degree injury unless it is avoided.  
CAUTION  
This is used in operation procedures or explanatory descriptions to  
convey exceptional conditions or cautions to the user.  
IMPORTANT  
Renesas Tools Homepage http://www.renesas.com/en/tools  
Rev.1.00  
Sep. 16, 2005  
(1/4)  
REJ10J1121-0100  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Usage (Emulator Debugger)  
The required operating environmental is described below.  
- Integrated development environment:  
- Emulator debugger:  
High-performance Embedded Workshop  
M16C R8C Compact emulator debugger Ver.1.01 Release 00 or later  
Set the emulation memory in the MCU setting dialog box of the emulator debugger.  
(1) MCU tab  
Specifying the processor mode  
Select the appropriate processor mode that suits  
your system.  
Specifying the bus width  
When specifying memory expansion mode or  
microprocessor mode, select 16-bitor 8-bit”  
for External Data Bus Width.  
Using or not using the memory space  
expansion function  
Specifies whether or not to use the memory  
space expansion function when selecting  
memory expansion mode or microprocessor  
mode. When using the memory space expansion  
function, select 4MB Mode. When not, select  
Normal Mode”  
Using or not using the internal  
reserved area expansion  
Specifies whether or not to expand the internal  
reserved area. Check the box if the internal  
reserved area expansion bit (PM13) is “1”.  
PM13=Set to 0:  
Internal RAM area: 00400h--03FFFh  
Internal ROM area: D0000h--FFFFFh  
PM13=Set to 1:  
Internal RAM area: 00400h--07FFFh  
Internal ROM area: 80000h--FFFFFh  
Specifying the PM10 (bit 0 of the  
address 0005h)  
When using the CS2 Area Switch Bit (PM10) as  
1, check this box. Specify the processor mode  
according to the user system.  
IMPORTANT  
Notes on Selecting a Processor Mode:  
z When setting memory expansion mode, the level of pin CNVSS of the MCU status should be "L". The MCU status  
shows the pin level of the user system.  
z When setting microprocessor mode, the level of pin CNVSS of the MCU status should be "H".  
z When setting memory expansion mode or microprocessor mode, pins RDY* and HOLD* of the user system should  
be "H".  
(2) MAP tab  
Specifying the emulation memory  
allocation  
Sets the memory area assigned to the emulation  
memory by 4KB. Up to four areas can be set.  
An area set to [INTERNAL] will be allocated to  
the emulation memory. An unchecked area or an  
unset area will be allocated to external area.  
The MAP setting is effective only in the CS3*,  
CS2*, CS1* and CS0*. The maps of SFR,  
internal ROM and RAM are set automatically.  
* MAP tab is displayed only when connecting the emulation memory board.  
(3/4)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Specifications of the Emulation Memory Board  
Applicable compact emulator  
Applicable MCU mode  
M3062PT3-CPE  
Memory expansion mode (NORMAL, 4MB)  
Microprocessor mode (NORMAL, 4MB)  
2.7 -- 5.5 V  
Applicable power supply  
Maximum operating frequency  
- Maximum operating frequency (at 5.0 V)  
0 wait:  
7 MHz  
1 wait:  
2 wait and 3 wait:  
20 MHz  
24 MHz  
- Maximum operating frequency (at 3.0 V)  
0 wait:  
6 MHz  
1 wait:  
2 wait and 3 wait:  
17 MHz  
24 MHz  
6. Precautions  
WARNING  
Warnings to Be Taken for This Product:  
z Do not disassemble or modify this product. Personal injury due to electric shock may occur if this product is  
disassembled and modified. Disassembling and modifying the product will void your warranty.  
Warning for Installation:  
z Do not set this product in water or areas of high humidity. Make sure that the product does not get wet. Spilling  
water or some other liquid into the product may cause unrepairable damage.  
Warning for Use Environment:  
z This equipment is to be used in an environment with a maximum ambient temperature of 35°C. Care should be taken  
that this temperature is not exceeded.  
CAUTION  
Cautions to Be Taken for This Product:  
z Use caution when handling this product. Be careful not to apply a mechanical shock.  
z Do not touch the connector pins of this product directly. Static electricity may damage the internal circuits.  
Caution to Be Taken for System Malfunctions:  
z If the emulator malfunctions because of interference like external noise, do the following to remedy the trouble.  
(1) Press the RESET button on the emulator upper panel.  
(2) If normal operation is not restored after step (1), shut OFF the emulator once and then reactivate it.  
7. Inquiries  
For the technical question about this product, fill in the text file which is downloaded from the following page, then send the  
information to your local distributor.  
(4/4)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Flat Panel Television TC L26X1 User Guide
RCA Telephone 2 9120 2 9130 User Guide
Reebok Fitness Treadmill RBTL15500 User Guide
Remington Trimmer BKT 1000, BKT 2000 User Guide
Rheem Water Heater 6 KW THRU 54 KW User Guide
Roberts Radio Portable Radio Classic DAB User Guide
Roland Electronic Keyboard SH 201 User Guide
Sanyo Projector PLV 80 75 User Guide
Seagate Computer Drive STAC2000106 User Guide
SECO LARM USA Home Security System SD 8103GT PEQ User Guide