PCA7438F-64A
PCA7438H-64A
PROM Programming Adapters for M38C13E6FP, M38C13E6HP
User's Manual
Rev.1.00
July 1, 2003
REJ10J0187-0100Z
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1. Precautions for Safety.........................................................................................................4
1.1 Safety Symbols and Meanings ..............................................................................4
2. Introduction ........................................................................................................................6
2.1 Things to Check When Unpacking .......................................................................6
3. Specifications .....................................................................................................................7
4. How to Write the Program .................................................................................................8
4.1 Programming Procedures ......................................................................................8
4.2 Attaching the Adapter to a PROM Programmer ...................................................9
4.3 Inserting an MCU into the Programming Adapter................................................9
4.4 Precautions When Handling the Adapter ............................................................10
4.5 Setting a Programming Area ...............................................................................10
5. Recommended PROM Programmers ...............................................................................10
6. Memory Maps ..................................................................................................................11
7. Troubleshooting................................................................................................................12
7.1 Errors That Occur When Writing to ROM .........................................................12
7.1.1 When Newly Purchased ........................................................................12
7.1.2 Previously Written Normally ................................................................12
7.2 MCU Does Not Function Normally ....................................................................13
7.3 Other Precautions ................................................................................................13
7.3.1 About the Recommended PROM Programmers...................................13
7.3.2 About Reading Out of Device Identification Code ..............................13
7.4 How to Request for Support................................................................................13
To Use the Product Properly
Precautions for Safety:
• Either in the User's Manual or on the product, several icons are used to insure proper
handling of this product and also to prevent injuries to you or other persons, or
damage to your properties.
• Their graphic images and meanings are given in Chapter 1, Precautions for Safety.
Be sure to read this chapter before using the product.
( 3 / 16 )
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Precautions for Safety
In this User's Manual, several icons are used to insure proper handling of this product and also to
prevent injuries to you or other persons, or damage to your properties.
This chapter describes precautions which should be taken in order to use this product safely and
properly. Be sure to read this chapter before using this product.
1.1 Safety Symbols and Meanings
If the requirements shown in the "WARNING"
sentences are ignored, the equipment may
cause serious personal injury or death.
WARNING
If the requirements shown in the "CAUTION"
sentences are ignored, the equipment may
malfunction.
CAUTION
It means important information on using this
product.
IMPORTANT
In addition to the three above, the following are also used as appropriate.
means WARNING or CAUTION.
Example:
CAUTION AGAINST AN ELECTRIC SHOCK
means PROHIBITION.
Example:
DISASSEMBLY PROHIBITED
means A FORCIBLE ACTION.
Example:
UNPLUG THE POWER CABLE FROM THE RECEPTACLE.
The following pages describe the symbols "WARNING", "CAUTION", and "IMPORTANT".
( 4 / 16 )
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
Warnings for Use Environment:
• This equipment is to be used in an environment with a maximum ambient temperature of 35°C. Care
should be taken that this temperature is not exceeded.
• Select the proper programming mode of the PROM programmer.
CAUTION
Cautions in Handling This Product:
• Do not disassemble or modify this product. Personal injury due to electric shock may occur if this
product is disassembled or modified.
• Use caution when handling this product. Be careful not to apply a mechanical shock such as falling,
etc.
• Do not directly touch the connector pins of this product.
• Be careful with the static electricity when handling this product and the MCU.
Caution in Keeping This Product:
• When not using this product for a long time:
(1) Attach the connector pins of this product to the conductive sponge.
(2) Put it into a conductive polyvinyl, and keep it in the package case shipped from the factory.
(3) Store it in the place where humidity and temperature are low and direct sunshine does not
strike.
IMPORTANT
When Using this Product:
• Attach this product to the IC socket on the PROM programmer properly.
• Insert the MCU to the IC socket of this product properly.
• Be sure to set the programming area as described in this user's manual.
• Do not use the PROM programmer's device identification code readout function.
( 5 / 16 )
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Introduction
The PCA7438F-64A and PCA7438H-64A are PROM programming adapters for 8-bit 38000 Series
38C1 Group MCUs. These adapters are tools that can be used to write a program into internal PROM
of MCUs using a commercially available PROM programmer.
This manual describes the specifications and the operation of PCA7438F-64A/PCA7438H-64A.
Figure 2.1 shows the external view and the constituent parts of them.
Figure 2.1 External view of PCA7438F-64A/PCA7438H-64A and their constituent parts
2.1 Things to Check When Unpacking
PCA7438F-64A/PCA7438H-64A consist of the following items. Check to see that it contains all of
the components shown in Table 2.1.
Table 2.1 Contents of PCA7438F-64A/PCA7438H-64A
Main unit
Interface unit
PCA7438F-64A/PCA7438H-64A
PCA7402B
PROM programer connector
User's Manual
PCA7402E (32-pin)
This user's manual
If any part is missing or there is any doubt about your product package, contact your local distributor.
( 6 / 16 )
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Specifications
Tables 3.1 and 3.2 list the specifications of the PROM programming adapters.
Table 3.1 Common specifications of the PROM programming adapters
Operating clock frequency
1 MHz
(Supplied by the ceramic oscillator mounted on the main unit)
Power supply
Main unit
Supplied from the Vcc of the PROM programmer
A programmable MCU mounted
(IC socket for the MCU mounted)
Interface board (buffer IC mounted)
(Connected by two rows of standard-pitch 18-pin connectors and two
rows of standard-pitch 16-pin connectors to the upper and lower
boards)
Board
configuration
PCA7402B
PCA7402E
Board to be connected to the PROM programmer
(Standard-pitch 32-pin pin-header to be connected to the PROM
programmer mounted)
Table 3.2 Each specification
MCU
M38C13E6FP (64-pin 0.8-mm-pitch QFP)
PCA7438F-64A
PCA7438H-64A
IC socket IC51-0644-824-6 (made by Yamaichi Electronics Co., Ltd.)
MCU
M38C13E6HP (64-pin 0.5-mm-pitch LQFP)
IC socket IC51-807.KS-12333 (made by Yamaichi Electronics Co., Ltd.)
( 7 / 16 )
Download from Www.Somanuals.com. All Manuals Search And Download.
4. How to Write the Program
This chapter describes how to write programs using a PROM programmer. For details on how to
operate the PROM programmer, refer to the user's manual of the PROM programmer.
4.1 Programming Procedures
Follow procedures (1) to (7) to write programs into the MCU.
(1) Read the program into the PROM programmer.
(2) Attach the adapter to the PROM programmer. (See Section 4.2)
(3) Insert the MCU into the adapter. (See Section 4.3)
(4) Specify the programming area of the MCU using the PROM programmer. (See Section 4.5) *1
(5) Using the PROM programmer's erase check function, check whether data can be written into
the programming area of the MCU. *2
(6) Write the program into the programming area of the MCU using the PROM programmer. *2
(7) Verify the programming area of the MCU using the PROM programmer to check whether the
program is written into the MCU correctly. *2
1
*
*
Be sure to set the programming area. Otherwise the mode's shift to the programming mode
may not be performed successfully. The erase check function etc. may not also be performed
completely.
2
Some PROM programmers perform the steps (5) through (7) automatically.
( 8 / 16 )
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2 Attaching the Adapter to a PROM Programmer
As shown in Figure 4.1, attach the pin No. 1 of the PCA7402E PROM programmer connector
(standard-pitch 32-pin pin-header mounted) to the pin No. 1 of the IC socket of the PROM
programmer.
Be careful when attaching the adapter because incorrect insertion can cause fatal
damage to the MCU.
Figure 4.1 Attaching the adapter to the PROM programmer
4.3 Inserting an MCU into the Programming Adapter
As shown in Figure 4.2, insert the MCU into the IC socket, with the pin No. 1 of the MCU matched
to the pin No. 1 of the IC socket on the PCA7438F-64A/PCA7438H-64A.
Be careful when inserting the MCU because incorrect insertion can cause fatal
damage to the MCU.
Top view
Figure 4.2 Inserting an MCU
( 9 / 16 )
Download from Www.Somanuals.com. All Manuals Search And Download.
4.4 Precautions When Handling the Adapter
Do not touch the connector in the IC socket and the pins on the PROM programmer connector,
otherwise it cause an electrical insulation failure because of dirt.
When not using, attach the connector pins of this product to the conductive sponge as it was shipped
from the factory.
4.5 Setting a Programming Area
When writing the program into the MCU, be sure to set the programming area. And also, specify its
device of the PROM programmer.
Table 4.1 Programming area
PROM programmer
Programming area
MCU type
MCU area
of the MCU
Device name
Programming area
M38C13E6FP
M38C13E6HP
Internal ROM
area
M5M27C101
A08016 - FFFD16
A08016 - FFFD16
5. Recommended PROM Programmers
The PROM programmers listed in Table 5.1 are recommended for this product. Using the actual
products, we have verified that these PROM programmers can be used to write programs without
problem. Nonconformity occurring by using any other PROM programmers can not be supported.
For the latest type of PROM programmers, contact the manufacturer to confirm whether it can be used
for your product.
Table 5.1 Recommended PROM programmers
Type name
R4945
Programming voltage (Vpp)
12.5 V
Manufacturer
Device name
Advantest
M5M27C101 mode
R4945A
( 10 / 16 )
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Memory Maps
Figure 6.1 shows memory maps of the MCU and the PROM programmer.
0000016
0000016
0A07F16
0A08016
0A07F16
0A08016
Internal ROM area
(24K bytes)
Programming area
0FFFD16
0FFFE16
0FFFD16
0FFFE16
1FFFF16
1FFFF16
MCU
M38C13E6FP
M38C13E6HP
PROM programmer
(M5M27C101 mode)
Figure 6.1 Memory map of M38C13E6FP/M38C13E6HP
( 11 / 16 )
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Troubleshooting
The table below summarizes errors to be checked carefully before you determine them to be a fault.
7.1 Errors That Occur When Writing to ROM
7.1.1 When Newly Purchased
Remedy
Cause
See page
9
Is the adapter attached to the correct position of the PROM
programmer?
Programming adapter
Is the MCU attached to the correct position?
Is the area specification set correctly?
Is the correct device selected?
9
10
10
PROM programmer
Contact failure
The IC socket of the PROM programmer may be stained. The
socket needs replacing.
-
7.1.2 Previously Written Normally
Remedy
Cause
See page
9
Is the adapter attached to the correct position of the PROM
programmer?
Programming adapter
PROM programmer
Is the MCU attached to the correct position?
Is the area specification set correctly?
Is the correct device selected?
9
10
10
The IC socket of the PROM programmer may be stained. The
socket needs replacing.
-
-
Contact failure
The PROM programmer connector at which the PROM
programmer is contacted may be stained. Clean it with
alcohol, etc.
( 12 / 16 )
Download from Www.Somanuals.com. All Manuals Search And Download.
7.2 MCU Does Not Function Normally
The program operates normally on the emulator, but when the MCU that has normally been written
is attached the same program does not function normally.
(1) Is the offset address specified correctly when copying data into the PROM programmer?
(2) In the emulator, NOPs are often inserted in the area where the program has not been read, therefore
the program happens to appear functioning normally even though it may have gone wild. Check
your program again.
(3) The emulator and the actual MCU may differ in characteristics. Consult the user's manual of the
emulation pod to check for differences in characteristics again.
7.3 Other Precautions
7.3.1 About the Recommended PROM Programmers
Not all PROM programmers available on the market can be checked to see if they function properly.
There are several PROM programmers that we have verified to function properly. These products are
listed as recommended PROM programmers in "5. Recommended PROM Programmers". Other
PROM programmers may also be used providing that you verified them to function properly.
Note: No matter which type of PROM programmer you use, it is necessary to verify completion of
programming by executing screening, etc. that are stipulated for each MCU used.
7.3.2 About Reading Out of Device Identification Code *1
Please do not use the PROM programmer's device identification code readout function.
Using this function may break down the MCU. The device identification code is included in EPROM
to indicate the manufacturer code and device code; it is not included in the MCU.
1
*
Depending on PROM programmer manufacturers, this may be referred to by another name (e.g.
ID code).
7.4 How to Request for Support
After checking this manual, fill in the following information and email to your local distributor.
For prompt response, please specify the following information:
(1) Contact address
• Company name
• Department
• Responsible person
• Phone number
• Fax number
• E-mail address
(2) Product information
• Name of the programming adapter
• Serial number
• Date of purchase
• Target MCU
• Symptoms (Fails blank check/Cannot write a program/Fails verification etc.)
• Detailed symptoms
• How often does the problem occur? (2 out of 10 etc.)
• When did the problem start to occur? (Since purchase/Used to work correctly)
• Type name of the PROM programmer (Advantest R4945A etc.)
• Specified device when writing to PROM (M27C101 etc.)
• Specified programming area when writing to PROM
• Switch settings of the adapter when writing to PROM
( 13 / 16 )
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
( 14 / 16 )
Download from Www.Somanuals.com. All Manuals Search And Download.
PCA7438F-64A, PCA7438H-64A User's Manual
Rev. 1.00
July 1, 2003
REJ10J0187-0100Z
COPYRIGHT ©2003 RENESAS TECHNOLOGY CORPORATION
AND RENESAS SOLUTIONS CORPORATION ALL RIGHTS RESERVED
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|