REJ10J1320-0100
H8/36109 Group Expansion I/O Board
HS36109EIO61H
User’s Manual
Renesas Microcomputer Development Environment System
H8 Family / H8/300H Tiny Series
HS36109EIO61HE
Rev.1.00
Revision Date: Apr. 06, 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and
more reliable, but there is always the possibility that trouble may occur with them. Trouble with
semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate
measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or
(iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas
Technology Corp. product best suited to the customer's application; they do not convey any license
under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or
a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-
party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or
circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and
algorithms represents information on products at the time of publication of these materials, and are
subject to change by Renesas Technology Corp. without notice due to product improvements or
other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or
an authorized Renesas Technology Corp. product distributor for the latest product information
before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising
from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means,
including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data,
diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total
system before making a final decision on the applicability of the information and products. Renesas
Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the
information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or
system that is used under circumstances in which human life is potentially at stake. Please contact
Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when
considering the use of a product contained herein for any specific purposes, such as apparatus or
systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in
whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must
be exported under a license from the Japanese government and cannot be imported into a country
other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the
country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products
contained therein.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INFORMATION
READ FIRST
• READ this user's manual before using this emulator product.
• KEEP the user's manual handy for future reference.
Do not attempt to use the emulator product until you fully understand its mechanism.
Emulator Product:
Throughout this document, the term "emulator product" shall be defined as the following
products produced only by Renesas Technology Corp. excluding all subsidiary products.
•
•
•
•
E6000 emulator station
Expansion I/O board
User system interface cables
PC interface board
The user system or a host computer is not included in this definition.
Purpose of the Expansion I/O Board:
This expansion I/O board is installed in the E6000 emulator, and enables the emulator station to be
connected to the user system interface cable. This expansion I/O board must only be used for the
above purpose.
Improvement Policy:
Renesas Technology Corp. (including its subsidiaries, hereafter collectively referred to as
Renesas) pursues a policy of continuing improvement in design, functions, performance, and
safety of the emulator product. Renesas reserves the right to change, wholly or partially, the
specifications, design, user's manual, and other documentation at any time without notice.
Target User of the Emulator Product:
This emulator product should only be used by those who have carefully read and thoroughly
understood the information and restrictions contained in the user's manual. Do not attempt to use
the emulator product until you fully understand its mechanism.
It is highly recommended that first-time users be instructed by users that are well versed in the
operation of the emulator product.
I
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
Renesas warrants its emulator products to be manufactured in
accordance with published specifications and free from defects in
material and/or workmanship. Renesas, at its option, will repair or
replace any emulator products returned intact to the factory,
transportation charges prepaid, which Renesas, upon inspection,
determine to be defective in material and/or workmanship. The foregoing
shall constitute the sole remedy for any breach of Renesas’ warranty.
See the Renesas warranty booklet for details on the warranty period. This
warranty extends only to you, the original Purchaser. It is not transferable
to anyone who subsequently purchases the emulator product from you.
Renesas is not liable for any claim made by a third party or made by you
for a third party.
DISCLAIMER
RENESAS MAKES NO WARRANTIES, EITHER EXPRESS OR
IMPLIED, ORAL OR WRITTEN, EXCEPT AS PROVIDED
HEREIN, INCLUDING WITHOUT LIMITATION THEREOF,
WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY,
FITNESS FOR ANY PARTICULAR PURPOSE OR USE, OR
AGAINST INFRINGEMENT OF ANY PATENT. IN NO EVENT
SHALL RENESAS BE LIABLE FOR ANY DIRECT, INCIDENTAL
OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR
LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE
EMULATOR PRODUCT, THE USE OF ANY EMULATOR
PRODUCT, OR ITS DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. EXCEPT AS
EXPRESSLY STATED OTHERWISE IN THIS WARRANTY, THIS
EMULATOR PRODUCT IS SOLD "AS IS ", AND YOU MUST
ASSUME ALL RISK FOR THE USE AND RESULTS OBTAINED
FROM THE EMULATOR PRODUCT.
II
Download from Www.Somanuals.com. All Manuals Search And Download.
State Law:
Some states do not allow the exclusion or limitation of implied warranties or liability for
incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may have other rights which may vary from
state to state.
The Warranty is Void in the Following Cases:
Renesas shall have no liability or legal responsibility for any problems caused by misuse,
abuse, misapplication, neglect, improper handling, installation, repair or modifications of the
emulator product without Renesas’ prior written consent or any problems caused by the user
system.
All Rights Reserved:
This user's manual and emulator product are copyrighted and all rights are reserved by
Renesas. No part of this user's manual, all or part, may be reproduced or duplicated in any form, in
hard-copy or machine-readable form, by any means available without Renesas’ prior written
consent.
Other Important Things to Keep in Mind:
1. Circuitry and other examples described herein are meant merely to indicate the characteristics
and performance of Renesas’ semiconductor products. Renesas assumes no responsibility for
any intellectual property claims or other problems that may result from applications based on
the examples described herein.
2. No license is granted by implication or otherwise under any patents or other rights of any third
party or Renesas.
Figures:
Some figures in this user's manual may show items different from your actual system.
Limited Anticipation of Danger:
Renesas cannot anticipate every possible circumstance that might involve a potential hazard.
The warnings in this user's manual and on the emulator product are therefore not all inclusive.
Therefore, you must use the emulator product safely at your own risk.
III
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PAGE
READ FIRST
• READ this user's manual before using this emulator product.
• KEEP the user's manual handy for future reference.
Do not attempt to use the emulator product until you fully understand its mechanism.
DEFINITION OF SIGNAL WORDS
This is the safety alert symbol. It is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
DANGER
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
CAUTION
CAUTION used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may result
in property damage.
NOTE emphasizes essential information.
IV
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
Observe the precautions listed below. Failure to do so
will result in a FIRE HAZARD and will damage the user
system and the emulator product or will result in
PERSONAL INJURY. The USER PROGRAM will be
LOST.
1. Do not repair or remodel the emulator product by
yourself for electric shock prevention and quality
assurance.
2. Always switch OFF the E6000 emulator and user system
before connecting or disconnecting any CABLES or
PARTS.
3. Always before connecting any CABLES, make sure that
pin 1 on both sides are correctly aligned.
4. Supply power according to the power specifications and
do not apply an incorrect power voltage. Use only the
provided power cable.
V
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
Thank you for purchasing this H8/36109 group expansion I/O board (HS36109EIO61H;
hereinafter referred to as the expansion I/O board) for the E6000 emulator.
The expansion I/O board enables user systems for Renesas’ original microcomputer H8/36109
group to be developed using an H8/36109 group E6000 emulator (HS3664EPI61H or
HS3664EPI62H; hereinafter referred to as the emulator).
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Section 1 Overview ...........................................................................................1
1.1 Environment Conditions................................................................................................... 1
1.2 Supported MCUs and User System Interface Cable......................................................... 1
1.3 Operating Voltage and Frequency Specifications............................................................. 2
1.4 Components ...................................................................................................................... 3
Section 2 Connection Procedures......................................................................5
2.1 Using Emulator without Connecting User System ........................................................... 5
2.2 Using Emulator with Connecting User System through User System Interface Cable .... 6
Section 3 User System Interface Circuit............................................................9
Section 4 Notice ................................................................................................11
4.1 Notes on Accessing Registers........................................................................................... 11
4.2 Power-on Reset and Low-voltage Detection Circuits....................................................... 13
4.3 On-chip Oscillator............................................................................................................. 13
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 1 Overview
The H8/36109 group E6000 expansion I/O board (hereinafter referred to as the expansion I/O
board) is an efficient software and hardware development support tool for application systems
using timer RC, timer RD, SCI3, and AD converter (ports D to H are shared), which are dedicated
additional functions of the Renesas’ original microcomputer H8/36109 group.
The expansion I/O board should be used with H8/3664 series E6000 emulator station
(HS3664EPI61H or HS3664EPI62H; hereinafter referred to as the emulator).
1.1
Environment Conditions
Table 1
Environment Conditions
Item
Specification
Temperature
Operating: +10 to +35°C
Storage: –10 to +50°C
Humidity
Operating: 35 to 80% RH; no condensation
Storage: 35 to 80% RH; no condensation
No corrosive gases
Ambient gases
Power supply
Power supply from E6000 emulator station
Depends on the MCU within the range 3.0 V to 5.5 V
User system voltage (UVcc)
1.2
Supported MCUs and User System Interface Cable
Table 2 shows the correspondence between the MCUs and the user system interface cable
supported by the emulator.
Table 2
H8/36109 Group MCUs and User System Interface Cable
MCU Type Number
Package
E6000 User System Interface Cable
HD64F36109
HD64336109
HD64336108
HD64336107
100-pin QFP (FP-100A)
HS36109ECF61H
100-pin QFP (FP-100U)
HS36109ECH61H
1
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3
Operating Voltage and Frequency Specifications
Table 3 shows the MCU operating voltage and frequency specifications supported by the
emulator. If the emulator is used in an environment that exceeds the operating voltage range and
operating frequency range guaranteed for the MCU operation, normal emulator operation is not
guaranteed.
Table 3
Operating Voltage and Frequency Specifications
MCU Type
Operating Voltage (V)
Operating Frequency Range (φ) (MHz)
H8/36109 group
3.0 to 5.5
4.0 to 5.5
4 to 10
4 to 20
NOTE
For details on the operating voltage and frequency
specifications, refer to the MCU hardware manual.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1.4
Components
Figure 1.1 shows the HS36109EIO61H expansion I/O board appearance, and table 4 lists the
components of the expansion I/O board. Please make sure you have all of these components when
unpacking.
E 6 0 0
0 E M U L A T
O R
E
E CABL
ERFAC
E 6 0 0 0
USER INT
Figure 1.1 HS36109EIO61H Expansion I/O Board
Table 4
HS36109EIO61H Components
No. Component
Quantity
Remarks
1
2
HS36109EIO61H
Documentation
1
1
Expansion I/O board
User’s manual for HS36109EIO61H (this manual)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 2 Connection Procedures
WARNING
Always switch OFF the user system and the emulator
product before the EXPANSION I/O BOARD or USER
SYSTEM INTERFACE CABLE is connected to or removed
from any part.
Before connecting, make sure that pin 1 on each side is
correctly aligned. Failure to do so will result in a FIRE
HAZARD and will damage the user system, the emulator
product, the user system interface cable, and the expansion
I/O board, or will result in PERSONAL INJURY. The USER
PROGRAM will be LOST.
2.1
Using Emulator without Connecting User System
1. Make sure the emulator is turned off.
2. After making sure the direction of the expansion I/O board connector (labeled E6000
EMULATOR) is correct, firmly insert the expansion I/O board connector into the emulator
station connector (labeled USER INTERFACE). It is possible to use the expansion I/O board
connecting only to the emulator.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2
Using Emulator with Connecting User System through User System
Interface Cable
CAUTION
When connecting or removing the user system interface
cable, apply force only in the direction suitable for
connection or removal, while making sure not to bend or
twist the cable or connectors.
Otherwise, the cables or connectors will be damaged.
1. Make sure that the emulator and the user system are turned off.
2. [1] After making sure the direction of the expansion I/O board connector (labeled E6000
EMULATOR) is correct, firmly insert the expansion I/O board connector into the emulator
station connector (labeled USER INTERFACE; [1] in figure 2.1).
[2] Connect the expansion I/O board (labeled USER INTERFACE CABLE) and the user
system interface cable body.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Emulator station
E 6 0 0 0
[1]
Expansion I/O board
E 6 0 0 0
[2]
Cable body connector
CTS screws (M3 x 6 mm)
User system interface cable
Figure 2.1 Connecting Expansion I/O Board to Emulator Station and User System
Interface Cable
7
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 User System Interface Circuit
Switches, protection circuits, and termination circuits are provided for this expansion I/O board
and used to connect signals to the user system interface cable. Figure 3.1 shows the user system
interface signal circuit.
E6000 (HS3664EPI61H or HS3664EPI62H)
HS36109EIO61H
Vcc
47 kΩ
H8/3664
H8/36109
Evaluation chip
47 Ω
User system
interface cable
Ports D, E, F, G, and H
Figure 3.1 User System Interface Signal Circuit (Ports D, E, F, G, and H)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 4 Notice
WARNING
Observe the precautions listed below. Failure to do so will
result in a FIRE HAZARD and will damage the user system
and the emulator product or will result in PERSONAL
INJURY. The USER PROGRAM will be LOST.
1. This expansion I/O board is specifically designed for the
H8/36109 group using the H8/3664 series E6000 emulator
(HS3664EPI61H or HS3664EPI62H). Do not use this
expansion I/O board with any other emulator station.
2. Use the H8/36109 group user system interface cable
(HS36109ECF61H for FP-100A or HS3109ECH61H for
FP-100U).
Do not use any other series of user system interface
cable.
1. Do not place heavy objects on the expansion I/O board.
2. Power is supplied from the emulator station to the expansion I/O board.
4.1
Notes on Accessing Registers
There are the following notes on accessing registers due to the differences between the product
chip and the evaluation chip.
1. For bits 7 and 6 of H’FFF5 (interrupt enable register 2), bits 7, 4, and 2 of H’FFF9 (module
standby control register 1), and bits 6, 5, 3, and 1 of H’FFFA (module standby control register
2), the hardware manual describes that ‘The initial value is 0. Reserved. This bit is always read
as 0.’ In the emulator, replace the description as ‘Set the bit to 0. This bit is read as the set
value.’
2. For bit 0 of H’FFFB, the hardware manual describes that ‘Reserved.’ In the emulator, replace
the description as ‘Set the bit to 0. This bit is read as the set value.’
3. In the hardware manual, there are registers in addresses H’F730 to H’F731, H’F734, H’F738
to H’F73A, H’F73C to H’F73F, H’FF90 to H’FF93, H’FF9B, and H’FFEF. In the emulator,
since there are no registers in those addresses, the description will be ‘This bit cannot be
modified and the read value is undefined.’
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 5
Differences between the Evaluation Chip and Product Chip Registers
AddressRegister
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
H'F730
H'F731
H'F734
H'F738
H'F739
H'F73A
H'F73C
H'F73D
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
H8/3660
(Evaluation H'F73E
chip)
H'F73F
H'FFEE PCRC
H'FFEF
-
H'FFF5 IENR2
H'FFF7 IRR2
IENTB3
IRRTB3
MSTS4
IENTB2
IENTB2
MSTIIC
IENTB1
IENTB1
MSTS3
MSTTB2
-
-
-
-
-
-
-
-
-
-
-
H'FFF9 MSTCR1
H'FFFA MSTCR2
H'FFFB MSTCR3
H'FFFC TSCR
MSTAD
MSTWD
MSTTW
MSTTV
MSTTA
MSTS3_2 MSTTB3
MSTTB1
MSTTX
-
-
-
MSTTZ0
MSTPWM
-
-
-
-
-
-
-
-
-
-
-
-
-
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 5
Differences between the Evaluation Chip and Product Chip Registers (cont)
AddressRegister
H'F730 LVDCR
H'F731 LVDSR
H'F734 CKCSR
H'F738 RCCR
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
LVDE
BGRE
-
-
-
-
-
LVDSEL
LVDRE
LVDDE
LVDUE
-
-
-
-
LVDDF
LVDUF
PMRJ1
RCSTP
PMRJ0
OSCSEL
-
CKSWIE
CKSWIF
-
CKCSTA
FSEL
VCLSEL
-
-
RCPSC1
RCPSC0
H'F739 RCTRMDPR WRI
PRWE
LOCKDW TRMDRWE
-
-
-
-
H'F73A RCTRMDR TRMD7
TRMD6
TRMD5
TRMD4
TRMD3
TRMD2
TRMD1
TRMD0
H'F73C ICRA
ICRA7
ICRA6
ICRA5
ICRA4
ICRA3
ICRA2
ICRA1
ICRA0
H8/36109 H'F73D ICRB
H'F73E ICRC
-
ICRB6
ICRB5
ICRB4
-
-
-
-
ICRC7
-
-
ICRC4
-
ICRC2
ICRC1
ICRC0
H'F73F ICRD
ICRD7
ICRD6
ICRD5
ICRD4
ICRD3
-
-
-
H'FFEE PCRC
-
-
-
-
PCRC3
PCRC2
PCRC1
PCRC0
H'FFEF SYSCR3
H'FFF5 IENR2
STS3
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
IENTB1
-
-
-
-
H'FFF7 IRR2
-
-
IRRTB1
-
-
-
-
H'FFF9 MSTCR1
H'FFFA MSTCR2
-
MSTIIC
MSTS3
-
MSTWD
MSTTV
MSTTA
MSTS3_2
-
-
-
-
-
-
MSTTB1
-
-
-
-
-
-
MSTPWM
H'FFFB
H'FFFC
-
-
-
-
-
-
-
-
4.2 Power-on Reset and Low-voltage Detection Circuits
For the product chip, power-on reset and low-voltage detection circuits can be selected as the
optional functions. However, since the evaluation chip does not incorporate these functions,
software debugging cannot be performed in the emulator.
4.3 On-chip Oscillator
The product chip incorporates an on-chip oscillator. However, since the evaluation chip does not
incorporate this function, software debugging on the on-chip oscillator and the general
input/output function of port J cannot be performed in the emulator.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
H8/36109 Group Expansion I/O Board
HS36109EIO61H User's Manual
Publication Date: Rev.1.00, April 6, 2006
Published by:
Sales Strategic Planning Div.
Renesas Technology Corp.
Customer Support Department
Global Strategic Communication Div.
Renesas Solutions Corp.
Edited by:
© 2006. Renesas Technology Corp. All rights reserved. Printed in Japan.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
RENESAS SALES OFFICES
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
Colophon 6.0
Download from Www.Somanuals.com. All Manuals Search And Download.
H8/36109 Group
Expansion I/O Board
HS36109EIO61H
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
|