Regency Universal Remote FireWizard User Guide

REMOTE CONTROL  
OPERATING INSTRUCTIONS  
918-582a  
07/11/06  
© Copyright 2006, FPI Fireplace Products International Ltd. All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Matching Remote Handset & Control Box ID Code.......................................................... 4  
Remote Control Keypad ..................................................................................................... 5  
Remote Control Screen Display (LCD).............................................................................. 6  
Quick Reference of Basic Functions................................................................................... 7  
Switching the Remote ON and OFF.............................................................................. 7  
Setting Time & Day ...................................................................................................... 7  
Manual and Auto Mode ................................................................................................ 8  
Displaying Temperature in Celsius or Fahrenheit ........................................................ 8  
Manual Mode ..................................................................................................................... 9  
Fan Speed Adjustment................................................................................................... 9  
Flame Height Adjustment............................................................................................ 10  
Auto Mode ........................................................................................................................ 11  
Program Mode .................................................................................................................. 12  
Setting the Program Mode ................................................................................................ 13  
Interfacing with Manual Control ...................................................................................... 18  
Troubleshooting / Battery Replacement ........................................................................... 18  
Special Conditions in Program Mode.......................................................................... 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Matching Remote Handset and Control Box ID Code  
The Remote Control Handset has a set of unique ID codes that is pre-programmed into its  
memory. This set of ID codes helps to differentiate one Remote Control Handset from  
another so that only the control box with a matching ID code will respond to the  
appropriate Remote Control Handset.  
To ensure the remote control is matched to the receiver correctly, please follow the steps  
below:  
1. Ensure that the Remote Control and the 3-way switch located at the appliance are  
both in the OFF position.  
2. Ensure that the pilot is lit and the pilot control knob is in the ON position on the  
appliance.  
3. Install the 2 x AAA alkaline batteries into the Remote Control.  
4. Unplug and re-plug the power cord. The power cord is located on the left hand  
side of the appliance and will be plugged into the receptacle.  
5. Switch the 3-way switch located on the appliance to the REMOTE position.  
6. Press and hold the PROG and FAN buttons simultaneously for up to 20 seconds.  
During this time, the remote will display LC while it is transmitting codes to the  
receiver. Once it is successfully transmitted, one will hear the solenoid click and  
the burners will come on. If is does not work the first time, repeat steps 1 - 6.  
7. Release both the PROG and FAN buttons. The remote will revert back to normal,  
but the burner will still be on.  
8. Press the ON/OFF button on the remote control 2 times to turn the burner off.  
9. The remote control is now programmed to the receiver and the appliance can now  
be operated with it.  
The control box will only learn the Remote ID codes during the first 30 seconds after  
power is applied and will ignore this special command from the Remote after the first 30  
seconds.  
NOTE: This must only be performed by a qualified installer.  
TM  
Page 4  
FPI FireWizard Remote Control Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The FireWizardTM Remote Control was developed to provide a user-friendly system to  
operate your appliance. The operating range is approximately 10 metres (32 feet).  
A Quick Reference Sticker is available to be placed on the back of your remote control  
handset. Place the sticker close to the very top of the remote, away from the battery  
opening and wall mounting bracket.  
REMOTE CONTROL KEYPAD  
There are 7 push buttons on the Remote Control:  
(1) ON/OFF Button: Switches the Remote & Control Box ON or OFF;  
(2) “+Button: This is the INCREMENT or HOUR button;  
(3) “-Button: This is the DECREMENT or MINUTE button;  
(4) AUTO/MAN Button: Toggles between Manual, Auto and Program mode;  
(5) TIME Button: Initiates the setting of the Time and Day;  
(6) PROG Button: Initiates the programming of Auto mode;  
(7) FAN Button: Changes the speed of the fan;  
(1) On/Off Button  
(2) “+” Button  
(4) Auto/Man Button  
(6) Prog Button  
(3) “-” Button  
(5) Time Button  
(7) Fan Button  
TM  
FPI FireWizard Remote Control Manual  
Page 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL SCREEN DISPLAY (LCD)  
The LCD provides the following display features:  
1. Flame Height Indication;  
2. Manual & Auto Mode Indication - “MANUAL” / “AUTO”;  
3. “ROOM” or “SET” Temperature Indicator;  
4. Day of the Week;  
5. Transmit Indicator “  
6. System Status Indicator “ON” or “OFF”;  
7. Battery Low Indicator “  
” ;  
8. Programmed Mode Indication “PROG 1” / “PROG 2”;  
9. Temperature Display in “ºC” or “ºF”;  
10. Fan Speed Indication;  
11. Time of Day with AM, PM;  
TM  
Page 6  
FPI FireWizard Remote Control Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC FUNCTIONS  
OF THE REMOTE CONTROL  
For the remote to function it must be turned ON. However when the remote is OFF, the  
LCD continues to display the current day, time and room temperature.  
Switching the Remote ON & OFF  
The On/Off button is used to switch the Remote ON or OFF.  
If the Remote is switched OFF, pressing and releasing the On/Off button will switch ON  
the Remote (and the FireWizardTM Control Box). Once switched ON, the Remote will  
continue with its last selected operating mode, for example, Manual, Auto or Program  
mode.  
Setting Time & Day  
Note: The remote control needs to be “ON” in order to set the Time & Day.  
Time  
Press and hold the “TIME” button for 2 seconds and then use the “+” button to set  
the hour and use the “-” button to set the minute.  
Day  
Immediately after setting the time, press the “TIME” button again and use the “+”  
or “-” button to set the day.  
Press the “TIME” button once more to record the setting.  
TM  
FPI FireWizard Remote Control Manual  
Page 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manual & Auto Mode  
Press the “Auto/Man” button to toggle from Auto, Manual & Program mode. See  
“Setting the Program Mode” for details on Program Mode.  
Manual  
In Manual Mode using the “+” or “-” button allows you to adjust the flame height  
accordingly. There are seven different levels of flame settings.  
Use the “Fan” button to adjust the fan speed. There are 3 different fan speed  
settings.  
Auto  
In Auto Mode using the “+” or “-” button allows you to change the Set  
Temperature.  
Use the “Fan” button to adjust the fan speed. There are 3 different fan speed  
settings.  
Displaying Temperature in Celsius or Fahrenheit  
The default setting of the Remote is to display the temperature in Celsius.  
However, the Remote can be changed to display temperature in Fahrenheit by the  
following steps:  
1. Ensure the Remote is switched off by using the On/Off button.  
2. Press and hold the “-” button.  
3. While the “-” button is held down, press and release the “+” button, this will  
toggle the temperature display between °C and °F.  
This setting is stored in memory hence the Remote will continue to display the  
temperature in Fahrenheit even if the battery is replaced.  
TM  
Page 8  
FPI FireWizard Remote Control Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MANUAL MODE  
Manual mode can be selected by pressing and releasing the AUTO/MAN button until the  
symbol “MANUAL” is shown on the LCD.  
In Manual mode, the Fan speed and Flame settings can be adjusted independently using  
the Remote.  
FAN Speed Adjustment  
The FAN button is used to switch on and change the selected fan speed.  
If the Fan is off, pressing and releasing the FAN button once will turn the fan on at High  
speed for 4 seconds and then to Low speed.  
Pressing and releasing the FAN button again will change the speed to Medium.  
Pressing and releasing the FAN button again will change the speed to High.  
Pressing and releasing the FAN button again will switch the Fan OFF.  
The display on the LCD will be as follows:  
Fan on Low Speed  
Fan on Medium  
Speed  
Fan on High Speed  
Fan = OFF  
TM  
FPI FireWizard Remote Control Manual  
Page 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Flame Height Adjustment  
There are seven levels of flame settings that can be selected manually using the “+” and  
-” button.  
Pressing and releasing the “+” button once will increase the flame to a higher setting.  
Continuously holding down the “+” button will increase the flame gradually until it has  
reached the highest setting.  
Conversely pressing and releasing the “-” button once will decrease the flame to a lower  
setting.  
Examples of the display on the LCD are as follows:  
Flame Setting = 1  
Flame Setting = 3  
Flame Setting = 7  
When the unit is turned on, the flame height is set to Hi for 20 seconds by default. After  
20 seconds, the flame will revert to the setting prior to being turned off.  
When the flame setting is at the lowest level (1), the flame indicator will blink on the  
handset, the rear burner will turn off, and the front burner will default to the highest  
setting. If the “+” button is pressed, the rear burner will turn on and the flame can  
continue to be increased.  
TM  
Page 10  
FPI FireWizard Remote Control Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUTO MODE  
In Auto Mode the remote will adjust the flame setting and fan speed according to the  
temperature difference between the Set Temperature and the Room Temperature.  
When the set temperature is higher than the room temperature by more than  
2.5°C (4.5°F), the flame will be at the highest setting (7) and the fan speed will  
default to the lowest setting (1).  
As the set temperature approaches room temperature, the flame level will reduce  
accordingly. When the set temperature is equal to the room temperature, the  
flame will stay at the lowest setting, and the fan will turn off.  
Once the room temperature is higher than the set temperature by 2°C (3.6°F), the  
flame will turn OFF.  
Auto mode can be selected by pressing and releasing the AUTO/MAN button until the  
symbol “AUTO” is shown on the LCD.  
In Auto mode, when either the “+” or “-” button is pressed, the Set Temperature will be  
displayed on the LCD instead of the Room Temperature. The Set Temperature will  
remain displayed on the LCD for 5 seconds after the button is released and then the  
display will revert to show the Room Temperature. The Set Temperature can be adjusted  
while it is displayed using the “+” and “-” buttons.  
The LCD will show the following when either the “+” or “-” button is pressed:  
Room  
Temperature  
Set  
Temperature  
Auto Mode normal  
display  
When “+” or “-”  
button is pressed  
TM  
FPI FireWizard Remote Control Manual  
Page 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROGRAM MODE  
Program mode is selected by pressing and releasing the AUTO/MAN button until the  
symbol “PROG” is shown on the LCD. The Remote will operate according to the settings  
in the 2 Programs set by the user. Refer to Setting the Program Mode for details.  
Pressing and releasing the “+” or “-” button in this mode will cause the temperature  
displayed on the LCD to change from showing the Room Temperature to show the Set  
Temperature. The Set Temperature will remain displayed on the LCD for 5 seconds after  
the button is released and then the display will revert to show the Room Temperature.  
Room  
Temperature  
Set  
Temperature  
Program 1 mode  
normal display  
When “+” or “-”  
button is pressed  
Pressing and releasing the PROGRAM button successively will allow the user to review  
the programmed times for each day of the week.  
If the Programs have not been programmed in the Remote, the display will show the  
following:  
Programs have not been set.  
TM  
Page 12  
FPI FireWizard Remote Control Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING THE PROGRAM MODE  
It is recommended to unplug the unit while setting the programs.  
In this mode, the user can program two On-Times and two Off-Times as well as the  
Temperature settings for each day of the week. The PROG button is used to initiate the  
programming mode. The “+” and “-” buttons are used to adjust the time and temperature  
settings.  
Note: The remote needs to be ON in order to set the Programs.  
Follow the steps below to set the programs:  
1) Programming the On-Time of Program 1  
Press and hold the PROG button for 2 seconds or more to initiate the  
Programming mode.  
The symbol “PROG 1” will flash to indicate the Remote is in Programming mode.  
The On-Time for Program 1 will also flash. The “+” and “-” buttons can be used  
to adjust this time setting.  
The LCD will show the current setting in Program 1 for Monday:  
Programming of Program 1  
Program 1 On-Time  
TM  
FPI FireWizard Remote Control Manual  
Page 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2) Programming the Off-Time of Program 1  
Press and release the PROG button again to program the Off-Time for Program 1.  
Use the “+” and “-” buttons to adjust this time setting.  
The LCD will show the following:  
Programming of Program 1  
Program 1 Off-Time  
3) Programming the Set Temperature for the On-Time of Program 1  
Press and release the PROG button again to program the Set Temperature. Use  
the “+” and “-” buttons to adjust the temperature setting.  
Program 1 Set Temperature  
Programming of Program 1  
TM  
Page 14  
FPI FireWizard Remote Control Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4) Programming the On-Time of Program 2  
Press and release the PROG button again to program the On-Time of Program 2.  
Use the “+” and “-” buttons to adjust this time setting.  
The LCD will show the following:  
Programming of Program 2  
Program 2 On-Time  
5) Programming the Off-Time of Program 2  
Press and release the PROG button again to program the Off-Time of Program 2.  
Use the “+” and “-” buttons to adjust this time setting.  
The LCD will show the following:  
Programming of Program 2  
Program 2 Off-Time  
TM  
FPI FireWizard Remote Control Manual  
Page 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6) Programming the Set Temperature for the On-Time of Program 2  
Press and release the PROG button one more time to program the Set  
Temperature of Program 2. Use the “+” and “-” buttons to adjust the temperature  
setting.  
Program 2 Set Temperature  
Programming of Program 2  
7a) Programming the Rest of the Week  
Repeat steps 2 to 6 until all 7 days have been programmed.  
7b) Alternatively, Copy Programs Over to the Other Days  
Pressing and holding the PROG button for 2 seconds or longer will initiate the  
copying process.  
The next Day of Week flashes  
Program 1 Setting of Monday  
TM  
Page 16  
FPI FireWizard Remote Control Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pressing and releasing the “+” button will select the Day(s) of which the program  
is to copy to.  
Pressing and releasing the “-” button will confirm the copying process in which  
the original program will copy across to the selected day(s).  
The next Day of Week flashes  
Program 1 Setting of Monday and  
Tuesday  
After the program is copied, the selected days will remain lit and the following day will  
start to flash.  
Press and release the PROG button to return to normal programming mode.  
8) Exiting Programming Mode  
The Remote will automatically exit the Programming mode 20 seconds after the  
last button is released.  
TM  
FPI FireWizard Remote Control Manual  
Page 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTERFACING WITH MANUAL CONTROL  
When the unit is turned ON using the Remote Control and is later switched OFF from the  
Manual Control Panel, the LCD on the Remote Control will still display as being ON  
even though the unit is actually OFF. To have the unit function from the Remote Control  
again you must press the ON/OFF button twice -- once to turn the remote OFF and then  
again to turn the unit ON from the remote.  
When the unit is turned ON from the Manual Control Panel, the LCD on the Remote  
Control will display as being OFF even though the unit is actually ON. To have the unit  
function from the Remote Control you will need to press the ON/OFF button once to turn  
ON the remote.  
TROUBLESHOOTING / BATTERY REPLACEMENT  
If the remote control does not turn on:  
Ensure the batteries are correctly installed in the receiver.  
Check the batteries for replacement (2 x AAA alkaline).  
When batteries are replaced, only the current time and day will need to be reset. The set  
program times are not affected.  
TM  
Page 18  
FPI FireWizard Remote Control Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special Conditions in Program Mode  
o If the On-Time of a Program matches the Off-Time of the same Program, the  
Program is disabled.  
o If the Off-Time of the first Program crosses over to the On-Time of the second  
Program, the Off-Time of the first Program will have precedent, for example,  
if Program 1 is programmed to end at 2:00 pm whereas Program 2 is  
programmed to commence at 1:00 pm, the following will occur:  
Program 1  
On-Time  
8:00 am  
Off-Time  
2:00 pm  
1:00 pm  
4:00 pm  
On-Time  
Off-Time  
Program 2  
Operates under Program 2 Setting  
Operates under Program 1  
Setting  
TM  
FPI FireWizard Remote Control Manual  
Page 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TM  
FireWizard is a trademark of FPI Fireplace Products International Ltd.  
Printed in Canada  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Conference Phone 17 916 User Guide
Radio Shack Cordless Telephone 43 3575 User Guide
RCA CRT Television 20F542T User Guide
RedMax Blower EB4300 User Guide
Rotel Stereo Amplifier RA 870BX User Guide
Rotel Stereo Equalizer RQ 970 User Guide
Samson Musical Toy Instrument Conspiracy User Guide
Samsung Digital Camera EC WB250FBPAUS User Guide
Samsung Freezer Rl 39 User Guide
Sennheiser Bluetooth Headset VMXOFFICE User Guide