Wood Inserts
I2400 Wood Insert
I2400 Medium Wood Insert
Firebox height is 21” at highest point.
Dimension Description
I2400
A
Adjacent Side Wall (to side)
11” (280mm)
20” (508mm)
20” (508mm)
12” (305mm)
8” (205mm)
18” (455mm)
1/2” (13mm)
8” (205mm)
Mantle (to top)**
B
Mantle Depth (not shown) Maximum
Top Facing (to top)
C
D
E
F
Side Facing (to side)
Minimum Hearth Extension*
Minimum Heath Thickness*
Minimum Hearth Side Extension
G
Side and Top facing is a maximum of 1-1/2" thick.
Floor protection must be non-combustible, insulating material with an R value of
1.1 or greater.
*
Hearth thickness of 1/2" with k value = 0.84", R value = 6 or greater.
** Anon-combustiblemantelmaybeinstalledatalowerheightiftheframing
is made of metal studs covered with a non-combustible board.
Thermal floor protection is not required if the unit is raised 3-1/2" minimum
(measuredfromthebottomofthestove).However,standardemberfloorprotection
is required. It will need to be a non-combustible material that covers 16" (406
mm) in the US and 18" (450 mm) in Canada to the front of the unit and 8" (200
mm) to the sides.
Minimum Fireplace Opening
Height
21-1/2” (546mm)
Width
Depth
25” (635mm)
If the unit is not raised, thermal floor protection required is 18" (450 mm) in the
US and Canada.
17” (432mm)
All floor protection must be non-combustible (i.e., metals, brick, stone, mineral
fiber boards, etc.) Any organic materials (i.e. plastics, wood paper products, etc.)
are combustible and must not be used. The floor protection specified includes
some form of thermal designation such as R-value (thermal resistance) or k-factor
Faceplate Dimensions
Standard
Oversize
40” (wide) x 30” (height)
48” (wide) x 33” (height)
(thermal conductivity).
June 2007 Regency Product Specifications Book
Download from Www.Somanuals.com. All Manuals Search And Download.
189
|