¨
Model No. RBTL19900
Serial No.
USER'S MANUAL
Serial
Number Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, we will guarantee
complete satisfaction through di-
rect assistance from our factory.
PLEASE CALL DIRECT TO OUR
TOLL-FREE CUSTOMER HOT
LINE. The trained technicians on
our customer hot line will provide
immediate assistance, free of
charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.ÐFri., 6 a.m.Ð6 p.m. MST
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
¨
new products, prizes,
fitness tips, and much more!
¨
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of burns, fire, electric shock, or injury to persons, read the
following important precautions and information before operating the treadmill.
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
must have a UL suppressed voltage rating of
400 volts or less and a minimum surge dissi-
pation of 450 joules. The surge suppressor
must be electrically rated for 120 volts AC and
15 amps.
2. Use the treadmill only as described in this
manual.
13. Keep the power cord and the surge suppres-
sor protector away from heated surfaces.
3. Place the treadmill on a level surface, with at
least eight feet of clearance behind it. Do not
place the treadmill on any surface that blocks
air openings. To protect the floor or carpet
from damage, place a mat under the treadmill.
14. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
BEFORE YOU BEGIN on page 5 if the tread-
mill is not working properly.)
4. Keep the treadmill indoors, away from mois-
ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
15. Never start the treadmill while you are stand-
ing on the walking belt. Always hold the
handrails while using the treadmill.
5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
16. The treadmill is capable of high speeds. Adjust
the speed in small increments to avoid sudden
jumps in speed.
6. Keep children under the age of 12 and pets
away from the treadmill at all times.
7. The treadmill should not be used by persons
weighing more than 300 pounds.
17. To reduce the possibility of the treadmill over-
heating, do not operate the treadmill continu-
ously for longer than one hour.
8. Never allow more than one person on the
treadmill at a time.
18. The heart rate monitor is not a medical de-
vice. Various factors, including the user's
movement, may affect the accuracy of heart
rate readings. The heart rate monitor is in-
tended only as an exercise aid in determining
heart rate trends in general.
9. Wear appropriate exercise clothing when
using the treadmill. Do not wear loose cloth-
ing that could become caught in the treadmill.
Athletic support clothes are recommended for
both men and women.
19. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord and move the on/off switch to
the off position when the treadmill is not in
use. (See the drawing on page 5 for the loca-
tion of the on/off switch.)
10. Always wear athletic shoes when using the
treadmill. Never use the treadmill with bare
feet, wearing only stockings, or in sandals.
11. When connecting the power cord (see page 9),
plug the power cord into a surge suppressor
(not included) and plug the surge suppressor
into a grounded circuit capable of carrying 15
or more amps. No other appliance should be
on the same circuit. Do not use an extension
cord.
20. Do not raise, lower, or move the treadmill
until it is properly set up. (See HOW TO SET
UP THE TREADMILL on page 6 and HOW TO
FOLD AND MOVE THE TREADMILL on page
27.) You must be able to safely lift 45 pounds
(20 kg) to raise, lower, or move the treadmill.
12. Use only a single-outlet surge suppressor that
is UL 1449 listed as a transient voltage surge
suppressor (TVSS). The surge suppressor
21. Do not change the incline of the treadmill by
placing objects under the treadmill.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
22. When folding or moving the treadmill, make
sure that the storage latch is fully closed.
26. Always remove iFIT.com CDÕs and videos
from your CD player or VCR when you are not
using them.
23. Inspect and tighten all parts of the treadmill
regularly.
27. Never drop or insert any object into any
opening.
24. When using iFIT.com CDÕs and videos, an
electronic ÒchirpingÓ sound will alert you
when the speed and/or incline of the treadmill
is about to change. Always listen for the
ÒchirpÓ and be prepared for speed and/or in-
cline changes. In some instances, the speed
and/or incline may change before the per-
sonal trainer describes the change.
28. This treadmill is intended for home use only.
Do not use this treadmill in any commercial,
rental, or institutional setting.
29.
DANGER:
Always unplug the power
cord immediately after use, before cleaning
the treadmill, and before performing the main-
tenance and adjustment procedures de-
scribed in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
representative only.
25. When using iFIT.com CDÕs and videos, you
can manually override the speed and incline
settings by pressing the speed and incline
buttons. However, when the next ÒchirpÓ is
heard, the speed and/or incline will change to
the next settings of the CD or video program.
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
The decals shown below have been placed on your treadmill. If a decal is missing or illegible, please call
our Customer Service Department, toll-free, to order a free replacement decal (see HOW TO ORDER RE-
PLACEMENT PARTS on page 35). Apply the decal in the location shown.
(One decal on
each side)
Note: The decal is shown at 38% of actual size.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for selecting the new REEBOK¨ RBX 600
treadmill. The RBX 600 treadmill combines advanced
technology with innovative design to let you enjoy an
excellent form of cardiovascular exercise in the conve-
nience and privacy of your home. And when youÕre not
exercising, the unique RBX 600 can be folded up, re-
quiring less than half the floor space of other treadmills.
at 1-800-999-3756, Monday through Friday, 6 a.m.
until 6 p.m. Mountain Time (excluding holidays). To
help us assist you, please mention the product model
number and serial number when calling. The model
number is RBTL19900. The serial number can be
found on a decal attached to the treadmill (see the
front cover of this manual for the location).
For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,
please call our Customer Service Department toll-free
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Book Holder
Water Bottle Holder
(Bottle is not included)
Console
Handrail
LEFT SIDE
Key/Clip
Lock Knob
RIGHT SIDE
Walking Belt
Foot Rails
On/Off Switch
Circuit
Breaker
Storage Latch
Front
Wheel
Power
Cord
Rear Roller
Adjustment Bolts
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO SET UP THE TREADMILL
Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials
until set-up is completed. No tools are required.
1. With the help of a second person, carefully raise the
Uprights (39) until the treadmill is in the position shown.
1
39
2. Make sure that the Lock Knob Sleeve (18) is pressed into
the left Upright (39).
2
Make sure that the two Lock Pin Collars (20) and the
Spring (19) are on the Lock Pin (49). Insert the Lock Pin
into the Lock Knob Sleeve (18) and the left Upright (39).
Tighten the Lock Knob (17) onto the Lock Pin.
18
19
17
49
39
20
3. Make sure that all parts are tightened before you use the treadmill. Place a mat under the treadmill to
protect the floor or carpet.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE HEART RATE MONITOR
HOW TO PUT ON THE HEART RATE MONITOR
HEART RATE MONITOR CARE AND MAINTENANCE
Before you use the heart rate monitor, please read all
instructions on this page and the following page.
¥ Thoroughly dry the heart rate monitor after each
use. The heart rate monitor is activated when the
electrode areas are wetted and the heart rate
monitor is put on; the heart rate monitor shuts off
when it is removed and the electrode areas are
dried. If the heart rate monitor is not dried after each
use, it may remain activated longer than necessary,
draining the battery prematurely.
The heart rate mon-
1
itor consists of two
components: the
chest strap and the
sensor unit.
Chest Strap
Refer to drawing 2
and attach the
chest strap to the
sensor unit. Insert
one of the tabs on
the chest strap
through one end of
the sensor unit.
Make sure to press
the end of the sen-
sor unit under the
buckle on the chest
strapÑthe tab
¥ Store the heart rate monitor in a warm, dry place. Do
not store the heart rate monitor in a plastic bag or
other container that may trap moisture.
¥ Do not expose the heart rate monitor to direct
sunlight for extended periods of time
Sensor Unit
Tab
¥ Do not expose the heart rate monitor to tempera-
tures above 122¡ Fahrenheit (50¡ Celsius) or below
14¡ Fahrenheit (-10¡ Celsius).
2
¥ Do not excessively bend or stretch the sensor unit
when using or storing the heart rate monitor.
should be almost
flush with the sen-
sor unit.
Sensor
Unit
Buckle
¥ Clean the sensor unit periodically using a damp
cloth; never use alcohol, abrasives, or chemicals.
The chest strap may be hand washed and air dried.
Next, wrap the heart
rate monitor around
your chest and at-
tach the other end of
the chest strap to
the sensor unit.
Adjust the length of
the chest strap, if
necessary.
HEART RATE MONITOR TROUBLE-SHOOTING
The instructions on the following pages explain
how the heart rate monitor is used with the console.
If the letters ÒPLSÓ appear in the PULSE display or if
the displayed heart rate is excessively high or low,
try the steps below.
¥ Make sure that the heart rate monitor is under your
clothing, tight against your skin, and as high under
the pectoral muscles or breasts as is comfortable. In
addition, make sure that the logo on the sensor unit
is facing forward and is right-side-up. Note: If the
heart rate monitor does not function when positioned
as described, try moving it slightly lower or higher on
your chest.
The heart rate moni-
tor should be under
your clothing, tight
against your skin, and as high under the pectoral mus-
cles or breasts as is comfortable. Make sure that the
logo on the sensor unit is facing forward and is right-
side-up.
¥ Use saline solution such as saliva or contact lens
solution to wet the two electrode areas on the
sensor unit. If heart rate readings do not appear until
you begin perspiring, re-wet the electrode areas.
Pull the sensor unit away from your body a few inches
and locate the two electrode areas on the inner side.
The electrode areas are the areas covered by shallow
ridges. Using saline solution such as saliva or contact
lens solution, wet both electrode areas. Return the
sensor unit to a position against your chest.
¥ As you walk or run on the treadmill, position your-
self near the center of the walking belt. For the
console to display heart rate readings, the user
must be within armÕs length of the console.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
¥ The heart rate monitor is designed to work with
people who have normal heart rhythms. Heart rate
reading problems may be caused by medical
conditions such as premature ventricular contrac-
tions (pvcs), tachycardia bursts, and arrhythmia.
Locate the battery cover
on the back of the sen-
sor unit. Insert a coin
into the slot in the cover
and turn the cover coun-
terclockwise to the
¥ The operation of the heart rate monitor can be
affected by magnetic interference caused by high
power lines or other sources. If it is suspected that
this is a problem, try relocating the treadmill.
ÒopenÓ position. Remove
the cover.
Remove the old battery
from the sensor unit.
Insert a new CR 2032
battery, making sure
that the writing is on top.
In addition, make sure
that the rubber gasket is
in place in the sensor
unit. Replace the battery
cover and turn it to the
closed position.
¥ The CR2032 battery may need to be replaced.
Follow the steps at the right to replace the battery.
CR2032
Battery
Rubber
Gasket
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TREADMILL OPERATION
THE PERFORMANT LUBETM WALKING BELT
This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illus-
trated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge suppressor to a 2-pole
receptacle as shown in drawing 2 if a properly
grounded outlet is not available.
Your treadmill features a walking belt coated with
PERFORMANT LUBETM, a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat-
form. Such substances will deteriorate the walking
belt and cause excessive wear.
1
HOW TO PLUG IN THE POWER CORD
Grounded Outlet Box
Surge Suppressor
Grounding Pin
DANGER:
Improper connection
of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service-
man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the productÑif it will
not fit the outlet, have a proper outlet
Grounding Pin
Grounded Outlet
Grounding Plug
installed by a qualified electrician.
2
Grounded Outlet Box
Adapter
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your homeÕs power.
Voltage surges, spikes, and noise interference can
result from weather conditions or from other appliances
being turned on or off. To decrease the possibility of
your treadmill being damaged, always use a surge
suppressor with your treadmill (see drawing 1 at
the right).
Surge Suppressor
Lug
Metal Screw
Use only a single-outlet surge suppressor that is UL
1449 listed as a transient voltage surge suppressor
(TVSS). The surge suppressor must have a UL sup-
pressed voltage rating of 400 volts or less and a mini-
mum surge dissipation of 450 joules. The surge sup-
pressor must be electrically rated for 120 volts AC and
15 amps.
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified elec-
trician to determine if the outlet box cover is
grounded before using an adapter.
This product must be grounded. If it should malfunc-
tion or break down, grounding provides a path of least
resistance for electric current to reduce the risk of elec-
tric shock. This product is equipped with a cord having
an equipment-grounding conductor and a grounding
plug. Plug the power cord into a surge suppressor,
and plug the surge suppressor into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Important: The treadmill is not compatible with
GFCI-equipped outlets.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
F
N
O
E
A
P
B
E
G
Q
C
R
K
J
L
H
H
D
E
I
Note: If there is a thin sheet of clear plastic
on the face of the console, remove it.
M
FEATURES OF THE CONSOLE
The console also features new iFIT.com interactive
technology. IFIT.com technology is like having a per-
sonal trainer right in your home. Using the included
audio cable, you can connect the treadmill to your home
stereo, portable stereo, or computer and play special
iFIT.com CD programs (CDÕs are available separately).
IFIT.com CD programs automatically control the speed
and incline of the treadmill as a personal trainer guides
you through every step of your workout. High-energy
music provides added motivation. Each CD features two
programs designed by certified personal trainers.
The advanced console offers an impressive array of
features to make your workouts more effective. When
the console is in the manual mode, the speed and in-
cline level of the treadmill can be changed with a touch
of a button. As you exercise, the LED displays will pro-
vide continuous exercise feedback.
The console also offers thirteen preset workout
programsÑten programs that automatically control the
speed and incline of the treadmill as they guide you
through effective fat-burning, aerobic, or performance
workouts; two pulse programs that control the speed
and the incline of the treadmill to keep your heart rate
near target heart rate settings during your workouts; and
a pulse-based fitness test program that estimates your
relative fitness level.
In addition, you can connect the treadmill to your VCR
and TV and play iFIT.com video programs (videocas-
settes are available separately). Video programs offer
the same benefits as iFIT.com CD programs, but add
the excitement of working out with a class and an
instructorÑthe hottest new trend at health clubs.
You can even create your own custom workout programs
and store them in memory for future use.
With the treadmill connected to your computer, you can
access basic programs, audio programs, and video
programs directly from the internet. And by adding an
optional iFIT.com module to the treadmill, you can use
virtually endless features from our internet site. See
www.iFIT.com for complete details. To purchase
iFIT.com CDÕs or videocassettes or an optional
iFIT.com module, call toll-free 1-800-735-0768.
In addition, the console features a workout history
mode that keeps track of the total hours you have exer-
cised, the miles you have walked or run, the calories
and fat calories you have burned, and your average
speed. The console can display the totals for the
previous 7 days or the totals since the workout history
mode was last reset.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
DIAGRAM OF THE CONSOLE
J. MODE ButtonÑThis button is used to select the
manual mode, workout programs, and the iFIT.com
mode.
Refer to the drawing on page 10.
A. ENTER ButtonÑThis button is used to enter age,
weight, and maximum heart rate settings.
K. START ButtonÑThis button starts the walking belt.
L. LEARN ButtonÑThis button is used to program
speed and incline settings for custom programs.
B. + and Ð ButtonsÑThese buttons are used to change
age, weight, and maximum heart rate settings.
M. Key with ClipÑThe key turns the console on and off.
The attached clip is designed to be worn on your
waistband. If the key is pulled from the console, the
power will automatically turn off.
C. USER ButtonÑThis button is used to select user in-
formation. Up to three different users can store age,
weight, and maximum heart rate settings.
D. QUICK SPEED ButtonsÑThese buttons allow you
to quickly select speed settings.
N. INCLINE ButtonsÑThese buttons control the incline
of the treadmill. Each time a button is pressed, the
incline will change by 0.5%. The incline range is 0%
to 12%.
E. LED DisplaysÑThese displays provide continuous
feedback of the calories and fat calories you have
burned, the elapsed time, the distance you have
walked or run, the number of laps you have com-
pleted, the speed of the walking belt, and your
current pace. In addition, the PULSE display shows
your heart rate when the heart rate monitor is worn.
Note: The console can display speed and dis-
tance in either miles or kilometers (see page 14).
For simplicity, all instructions in this manual
refer to miles.
O. INCLINE DisplayÑThis display shows the incline
level of the treadmill. Note: No indicators will light
when the incline is at 0% or 0.5%; the first indicator
will light when the incline is at 1% or 1.5%; the sec-
ond indicator will light when the incline is at 2% or
2.5%; the third indicator will light when the incline is
at 3% or 3.5%, etc.
P. 7-DAY ButtonÑThis button allows you to view the
number hours you have exercised, the miles you
have walked or run, the calories and fat calories
you have burned, and your average speed for the
previous 7 days (see THE WORKOUT HISTORY
MODE on page 21).
F. LED MatrixÑWhen the manual mode is selected,
the matrix will show your progress on an LED track.
When a workout program is selected, the matrix will
show the upcoming speed or target heart rate set-
tings of the program.
Q. TOTAL ButtonÑThis button allows you to view the
total hours you have exercised, the miles you have
walked or run, the calories and fat calories you
have burned, and your average speed since the
workout history mode was last reset.
G. Manual/Program IndicatorsÑThese indicators show
when the manual mode, a workout program, or the
iFIT.com mode is selected.
H. SPEED ButtonsÑThese buttons control the speed
of the walking belt. Each time a button is pressed,
the speed will change by 0.1 mph; if a button is held
down, the speed will change in increments of 0.5
mph. The speed range is 0.5 mph to 12 mph.
R. HISTORY RESET buttonÑThis button resets the
workout history mode.
I. STOP ButtonÑThis button stops the walking belt.
When the button is pressed, the LED displays will
pause and the TIME display will flash.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
To use the manual mode, follow the steps beginning
on page 13. To use a fat burn, aerobic, or perfor-
mance program, see page 15. To use a pulse pro-
gram, see page 16. To use the fitness test program,
see page 17. To create and use a custom program,
see pages 19 and 20. To use the workout history
mode, see page 21. To use an iFIT.com CD or video
program, refer to page 24. To use an iFit.com pro-
gram directly from our internet site, see page 26.
CAUTION:Before operating the
console, read the following precautions.
¥ Do not stand on the walking belt when turn-
ing on the power or starting the walking belt.
¥ Always wear the clip (see M on page 10) while
operating the treadmill. If the key is pulled
from the console, the walking belt will stop.
¥ The treadmill is capable of high speeds;
adjust the speed in small increments.
HOW TO ENTER USER INFORMATION
¥ The heart rate monitor is not a medical de-
vice. Various factors may affect the accuracy
of heart rate readings. The heart rate monitor
is intended only as an exercise aid in deter-
mining heart rate trends in general.
Each time the power is turned
on, the USER 1 indicator will
begin to flash. The console
allows up to three different
users to enter their weight,
their age, and a maximum
heart rate setting into the console.
¥ If you have heart problems, or if you are over
60 years of age and have been inactive, do
not use the three pulse-driven programs. If
you are taking medication regularly, consult
your physician to find whether the medica-
tion will affect your exercise heart rate.
If you enter your weight into the console, the CALS/
FAT CALS display will be more accurate. If you want to
use the fitness test program, you must enter your age.
If you want to use pulse programs 1 or 2, you must
enter your age and a maximum heart rate setting.
¥ To reduce the risk of electric shock, keep the
console dry. Avoid spilling liquid on the
console and use only a sealable water bottle.
If you want to enter your weight, your age, or a maxi-
mum heart rate setting, follow the instructions below.
Press the USER button.
HOW TO TURN ON THE POWER
1
Press the USER button
to designate yourself as
user 1. The USER 1
indicator will remain lit
without flashing. Note: To
designate yourself as
user 2 or user 3, press the USER button repeat-
edly. IMPORTANT: Each time you use the tread-
mill, make sure that the correct user is selected.
Make sure that the
on/off switch, located
on the front of the
treadmill, is in the on
position. Next, make
sure that the power
cord is properly
plugged in (see
page 9).
On
Enter your weight if desired.
2
Stand on the foot rails of the
treadmill. Find the clip
attached to the key (see M on
page 10), and slide the clip
onto the waistband of your
clothes. Next, insert the key
fully into the console. After a
The current weight set-
ting will be shown in the
CALS/FAT CALS display.
Press the + or Ð button to
enter your weight. Each
button press will change
the weight setting by 1 pound; if a button is held
down, the weight setting will change in increments
of 5 pounds. When your weight is shown, press
the ENTER button. Note: Once your weight is
entered, it will be saved in memory, even when
the power cord is unplugged.
moment, various displays and indicators will light. Test
the clip by carefully taking a few steps backward
until the key is pulled from the console. If the key is
not pulled from the console, adjust the position of
the clip as needed. Then, re-insert the key fully into
the console.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Enter your age if desired.
HOW TO USE THE MANUAL MODE
3
The current age setting
will be shown in the
PULSE display. Press
the + or Ð button to enter
your age. Each button
press will change the age
setting by 1 year; if a button is held down, the age
setting will change in increments of 5 years. When
your age is shown, press the ENTER button. Note:
Once your age is entered, it will be saved in mem-
ory, even when the power cord is unplugged.
Insert the key fully into the console.
1
See HOW TO TURN ON THE POWER on page 12.
Select user 1, 2, or 3.
2
When the key is inserted,
user 1 will be selected,
as shown by the USER 1
indicator. If you have
designated yourself as
user 2 or 3, press the
USER button repeatedly until the appropriate indi-
cator lights.
Enter a maximum heart rate setting if desired.
4
The current
maximum
heart rate set-
ting will be
shown in the
LED matrix.
When pulse
programs 1 or
2 are used,
this is the highest level that your heart rate will
reach during the program. This setting is a per-
centage of your estimated maximum heart rate.
(Your estimated maximum heart rate is 220 minus
your age. For example, if you are 30 years old,
your estimated maximum heart rate is 190.)
Enter your weight if desired.
3
If you have not entered your weight, see HOW TO
ENTER USER INFORMATION on page 12.
Select the manual mode.
4
When the key is inserted,
the manual mode will be
selected. If you have se-
lected a workout pro-
gram or the iFIT.com
mode, you can select
the manual mode again by pressing the MODE
button repeatedly until the manual indicator lights.
If desired, you can change the maximum heart
rate setting by pressing the + and Ð buttons. Each
button press will change the setting by 1%; if a
button is held down, the setting will change in in-
crements of 5%. The setting can be from 65% to
85%. When the desired setting is shown, press the
ENTER button. Note: When the key is removed
from the console, the maximum heart rate setting
will be reset to 65%.
Press the START button or the SPEED + button
to start the walking belt.
5
A moment after the
button is pressed, the
walking belt will begin to
move at 1.0 mph. Hold
the handrails and begin
walking. As you exer-
cise, change the speed of the walking belt as de-
sired by pressing the SPEED buttons or the
QUICK SPEED buttons. CAUTION: Change the
speed in small increments to avoid sudden
jumps in speed.
To stop the walking belt, press the STOP button.
The displays will pause and the TIME display will
begin to flash. To restart the walking belt, press
the START button or the SPEED
+
button.
Note: When either of the SPEED buttons is pressed,
the SPEED/PACE display will show the selected
speed setting for seven seconds. The display will
then show the actual speed of the walking belt.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
How to select miles per
hour or kilometers per
hour: Speed can be dis-
played in either miles per
hour (mph) or kilometers
per hour (kph). To change
the unit of measurement, first hold down the STOP
button while inserting the key into the console. The
SPEED/PACE display will show either an ÒEÓ for
English miles or an ÒMÓ for Metric kilometers. Press
the SPEED + button to change the unit of measure-
ment. Then, remove and reinsert the key.
Adjust the incline as desired.
6
7
To vary the intensity of
your workout, change the
incline of the treadmill as
desired by pressing the
INCLINE buttons Note:
After the INCLINE but-
tons are pressed, it will
take a moment for the
treadmill to reach the selected incline setting.
Follow your progress with the LED track and
the LED displays.
DISTANCE/LAPS
displayÑThis display
shows the distance that
the walking belt has
The LED
TrackÑThe
moved and the number
of laps you have com-
LED track rep-
resents a dis-
pleted (one lap equals 1/4 mile). The display will
alternate between one number and the other every
seven seconds.
tance of 1/4
mile. As you
exercise, the
indicators
Note: If the speed is displayed in miles per hour,
the distance will be displayed in miles; if the speed
is displayed in kilometers per hour, the distance
will be displayed in kilometers.
around the
track will light one at a time until you have com-
pleted 1/4 mile. A new lap will then begin.
CALS/FAT CALS
displayÑThis display
shows the approximate
numbers of calories and
fat calories you have
burned (see FAT BURN-
TIME displayÑThis
display shows the total
time that the walking belt
has been moving. Note:
When a workout pro-
gram is selected, this
display will show the time remaining in the program.
ING on page 33). Every seven seconds, the display
will change from one number to the other.
When you are finished exercising, stop the
walking belt and remove the key.
PULSE displayÑThis
display shows your heart
rate when the heart rate
monitor is worn. (See
page 7.)
8
Step onto the foot rails and press the STOP button.
Next, change the incline of the treadmill to the
lowest setting. The incline must be at the low-
est setting when the treadmill is folded to the
storage position or the treadmill will be dam-
aged.
SPEED/PACE displayÑ
This display shows the
speed of the walking belt
and your current pace
Remove the key from the console and put it in a
secure place. Finally, move the on/off switch to the
off position and unplug the power cord.
(pace is measured in min-
utes per mile). The dis-
play will alternate between one number and the
other every seven seconds. Note: When either of
the SPEED buttons is pressed, the display will
show the speed setting.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
matrix.) The
speed settings
for the next
eighteen peri-
ods will be
shown in the
eighteen
CURRENT PERIOD
HOW TO USE FAT BURN, AEROBIC, AND
PERFORMANCE PROGRAMS
The ten fat burn, aerobic, and performance programs
automatically control the speed and incline of the tread-
mill as they guide you through effective workouts de-
signed to help you achieve specific exercise goals.
columns to the
right.
Follow the steps below to use a fat burn, aerobic, or
performance program.
When only three seconds remain in the first period
of the program, both the CURRENT PERIOD col-
umn and the column to the right will flash, a series
of tones will sound, and all speed settings will
move one column to the left. The speed setting for
the second period will then be shown in the flash-
ing CURRENT PERIOD column and the treadmill
will automatically adjust to the speed and incline
settings for the second period.
Insert the key fully into the console.
1
See HOW TO TURN ON THE POWER on page
12.
Select user 1, 2, or 3.
2
See step 2 on page 13.
The program will continue in this way until the
speed setting for the last period is shown in the
CURRENT PERIOD column and the TIME display
counts down to zero. The walking belt will then
slow to a stop.
Enter your weight if desired.
3
If you have not entered your weight, see HOW TO
ENTER USER INFORMATION on page 12.
Select the desired program.
Note: Each time a period ends and the speed set-
tings move to the left, if all of the indicators in the
CURRENT PERIOD column are lit, the speed set-
tings may move downward so that only the highest
indicators in the columns will appear in the LED
matrix. When the speed settings move to the left
again and not all of the indicators in the CURRENT
PERIOD column are lit, the speed settings will
move back up.
4
When the key is inserted,
the manual mode will be
selected. To select a fat
burn, aerobic, or perfor-
mance program, press
the MODE button
repeatedly until one of the fat burn, aerobic, or
performance indicators lights. The LED matrix will
show the first eighteen speed settings of the
program you have selected. The SPEED/PACE
display will flash the programÕs maximum speed
setting and the INCLINE display will flash the pro-
gramÕs maximum incline setting for ten seconds.
If the speed or incline setting for the current
period is too high or too low, you can manually
override the setting by pressing the SPEED or
INCLINE buttons. Every few times one of the
SPEED buttons is pressed, an additional indicator
will light or darken in the CURRENT PERIOD col-
umn. If any of the columns to the right of the
CURRENT PERIOD column have the same num-
ber of lit indicators as the CURRENT PERIOD col-
umn, an additional indicator may light or darken in
those columns as well. Note: If you manually ad-
just the speed setting so that all of the indicators in
the CURRENT PERIOD column are lit, the speed
settings in the LED matrix will not move downward
as described above. Note: If you manually over-
ride the speed or incline setting for the current
period, when the period ends the treadmill will
automatically adjust to the speed and incline
settings for the next period.
Press the START button or the SPEED + button
to start the program.
5
A moment after the button is pressed, the treadmill
will automatically adjust to the first speed and in-
cline settings for the program. Hold the handrails
and begin walking.
Each program is divided into several time periods
of different lengths. One speed setting and one in-
cline setting are programmed for each period. The
speed setting for the first period is shown in the
flashing CURRENT PERIOD column of the LED
matrix. (The incline settings are not shown in the
15
Download from Www.Somanuals.com. All Manuals Search And Download.
To stop the program temporarily, press the STOP
button. The TIME display will begin to flash. To
restart the program, press the START button or the
SPEED + button. To end the program, press the
STOP button, remove the key, and then reinsert the
key.
gram can be started without a heart rate reading;
however, the speed and/or incline of the treadmill
will automatically decrease if your heart rate is not
detected during the program.
Select the desired program.
5
6
Follow your progress with the LED displays.
When the key is inserted,
the manual mode will be
selected. To select pulse
program 1 or 2, press the
MODE button repeatedly
until the pulse program 1
or 2 indicator lights. The first nineteen target heart
rate settings of the program you have selected will
appear in the LED matrix.
6
7
See step 7 on page 14.
When the program is completed, remove the
key.
Make sure that the incline of the treadmill is at
the lowest setting. The incline must be at the
lowest setting when the treadmill is folded to
the storage position or the treadmill will be
damaged. Next, remove the key from the console
and put it in a secure place. In addition, move the
on/off switch to the off position and unplug the
power cord.
Press the START button or the SPEED + button
to start the program.
A moment after the button is pressed, the treadmill
will automatically adjust to the first speed and in-
cline settings for the program. Hold the handrails
and begin walking.
HOW TO USE PULSE PROGRAMS 1 AND 2
Pulse pro-
grams 1 and 2
CURRENT PERIOD
consist of
twenty-three,
one-minute
periods. One
Pulse programs 1 and 2 automatically control the speed
and incline of the treadmill to keep your heart rate within
a predetermined range during your workouts.
target heart
rate setting is
programmed
for each
period. The
target heart rate setting for the first period will be
shown in the flashing CURRENT PERIOD column
of the LED matrix. The target heart rate settings for
the next eighteen periods will be shown in the eigh-
teen columns to the right.
Follow the instructions below to use pulse programs 1
or 2.
Insert the key fully into the console.
1
See HOW TO TURN ON THE POWER on page 12.
Select user 1, 2, or 3.
2
See step 2 on page 13.
When only three seconds remain in the first period
of the program, both the CURRENT PERIOD col-
umn and the column to the right will flash and a
series of tones will sound. All target heart rate
settings will then move one column to the left. The
target heart rate setting for the second period will
then be shown in the CURRENT PERIOD column.
Enter your weight, your age, and a maximum
heart rate setting.
3
If you enter your weight into the console, the
CALS/FAT CALS display will be more accurate. To
use pulse programs 1 or 2, you must enter your
age and a maximum heart rate setting. If you
have not entered this information, see HOW TO
ENTER USER INFORMATION on page 12.
As the program progresses, the speed and/or
incline of the treadmill will change automatically to
keep your heart rate near the heart rate setting
shown in the CURRENT PERIOD column. The
program will continue until the heart rate setting for
the last period is shown in the CURRENT PERIOD
column and the TIME display counts down to zero.
The walking belt will then slow to a stop.
Put on the heart rate monitor.
4
The heart rate monitor must be worn when a pulse
program is used. (See HOW TO USE THE HEART
RATE MONITOR on page 7.) Note: A pulse pro-
16
Download from Www.Somanuals.com. All Manuals Search And Download.
If your heart rate is not detected during the program,
the letters ÒPLSÓ will flash in the PULSE display
and the speed and/or incline of the treadmill will
automatically decrease. (See HEART RATE
MONITOR TROUBLE-SHOOTING on page 7.)
HOW TO USE THE FITNESS TEST PROGRAM
The fitness test program is designed to estimate the rel-
ative fitness level you have achieved. For the best re-
sults, the fitness test program should be used at a time
when your energy level is high; the program should not
be used if you have already exercised during the day.
While the program is in progress, minor adjust-
ments can be made to the speed or incline of the
treadmill with the SPEED or INCLINE buttons.
However, if you increase the speed, the incline will
automatically decrease; if you decrease the speed,
the incline will increase. If you increase the incline,
the speed will decrease; if you decrease the incline,
the speed will increase. The console will always
attempt to keep your heart rate near the heart rate
setting shown in the CURRENT PERIOD column.
Note: When the incline reaches the lowest setting,
the speed cannot be increased any further. When
the incline reaches the highest setting, the speed
cannot be decreased any further.
The fitness test program consists of up to seven
4-minute segments and is followed by a 2-minute cool-
down period. The speed and/or incline of the treadmill
will automatically increase at the beginning of each 4-
minute segment. When your heart rate reaches 70% of
your estimated maximum heart rate, the FITNESS
TEST will end. After a 2-minute cool-down period, the
console will display your estimated fitness level.
To use the fitness test program, follow the steps below.
Insert the key fully into the console.
To stop the program, press the STOP button. Pulse
programs should not be stopped temporarily and
then restarted. To use the pulse program again, re-
select the program and start it at the beginning.
1
See HOW TO TURN ON THE POWER on page 12.
Select user 1, 2, or 3.
2
Follow your progress with the LED displays.
See step 2 on page 13.
7
8
See step 7 on page 14.
Enter your age into the console.
3
When the program is completed, remove the
key.
To use the fitness test program, you must
enter your age. If you have not entered your age,
see HOW TO ENTER USER INFORMATION on
page 12.
See step 7 on page 16.
Put on the heart rate monitor.
4
The heart rate monitor must be worn when the fit-
ness test program is used. (See HOW TO USE
THE HEART RATE MONITOR on page 7.) Note:
The fitness test program can be started without a
heart rate reading; however, the program will auto-
matically stop if your heart rate is not detected 4
minutes after the program is started.
Select the fitness test program.
5
When the key is inserted,
the manual mode will be
selected. To select the
fitness test program,
press the MODE button
repeatedly until the ÒFÓ
indicator lights. The first eighteen speed settings of
the program will appear in the LED matrix.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
At the beginning of each four-minute segment, the
speed and/or incline of the treadmill will automati-
cally increase. The fitness test program will con-
tinue in this way until your heart rate reaches 70%
of your estimated maximum heart rate, and the
current four-minute segment is completed. The fit-
ness test program will then be completed, regard-
less of how many segments remain.
Press the START button or the SPEED + button
to start the program.
6
A moment after the but-
ton is pressed, the in-
cline of the treadmill will
automatically adjust to
3% and the walking belt
will begin to move at 1.5
When the fitness test pro-
gram is completed, the
letter ÒCÓ will appear in
the DISTANCE/LAPS
display and a two-minute
cool-down period will
mph. The DISTANCE/LAPS display will show an
ÒL 1Ó (level 1), indicating that the first 4-minute
segment of the fitness test program has begun.
Hold the handrails and begin walking.
The fitness test program is divided into seven,
four-minute segments. Each segment consists of
four, one-minute periods. One speed setting and
one incline
begin. The incline will then adjust to 1% and the
speed will decrease.
When the cool-down pe-
riod is completed, the
setting are
programmed
walking belt will slow to a
stop and your fitness
for each pe-
riod. The
level will be shown in the
TIME display. There are
speed setting
for the first pe-
ten fitness levelsÑfitness level 10 (FL:10) is the
highest. Remember, the fitness test program is in-
tended only to indicate your relative fitness level.
riod will be
shown in the
flashing
CURRENT PERIOD column of the LED matrix.
(The incline settings are not shown in the matrix.)
The speed settings for the next eighteen periods
will be shown in the eighteen columns to the right.
Note: The SPEED and INCLINE buttons will not
function while the fitness test program is selected.
If your pulse is not detected during the program,
the letters ÒPLSÓ will flash in the PULSE display. If
your pulse is not detected during the last thirty
seconds of any four-minute segment (after four
minutes, after eight minutes, etc.), the fitness test
program will end and the TIME display will show a
fitness level of 0 (FL: 0).
When only three seconds remain in the first pe-
riod of the program, both the CURRENT PERIOD
column and the column to the right will flash, a
tone will sound, and all speed settings will move
one column to the left. The speed setting for the
second period will then be shown in the flashing
CURRENT PERIOD column.
The fitness test program cannot be stopped tem-
porarily and then restarted. However, the program
can be stopped at any time by pressing the STOP
button. The TIME display will then show an esti-
mated fitness level.
When the first four-minute segment of the pro-
gram is completed, both the CURRENT PERIOD
column and the column to the right will flash, a se-
ries of tones will sound, and all speed settings will
move one column to the left. The LED matrix will
then show an ÒL 2,Ó indicating that the second 4-
minute segment has begun. The incline will then
adjust to 4% and the speed will increase to 2.5
mph.
When the program is completed, remove the
key.
7
See step 7 on page 16.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
programmed
for each pe-
riod. The
HOW TO CREATE CUSTOM PROGRAMS
CURRENT PERIOD
speed setting
for the first pe-
riod is shown
in the flashing
CURRENT
PERIOD col-
umn of the
LED matrix.
Custom programs 1 and 2 are workout programs that
you create. The programs control both the speed and
incline of the treadmill, and can be up to 40 minutes
long. The programs are stored in memory and can be
changed as many times as desired.
Follow the steps below to create a custom program.
(The incline settings are not shown in the matrix.)
To program speed and incline settings for the first
period, simply adjust the speed and incline of the
treadmill to the desired levels with the SPEED and
INCLINE buttons. Every few times the SPEED but-
tons are pressed, one additional indicator will light
or darken in the CURRENT PERIOD column.
Insert the key fully into the console.
1
See HOW TO TURN ON THE POWER on page 12.
Select user 1, 2, or 3.
2
See step 2 on page 13.
When the first period of the program is completed,
three tones will sound and the current speed and in-
cline settings will be stored in memory. All speed
settings shown in the LED matrix will then move one
column to the left and the speed setting for the sec-
ond period will be shown in the flashing CURRENT
PERIOD column. Program speed and incline set-
tings for the second period as described above.
Repeat this procedure until you have programmed
speed and incline settings for as many periods as
desired. Programs can have up to forty periods.
Enter your weight if desired.
3
If you have not entered your weight, see HOW TO
ENTER USER INFORMATION on page 12.
Select custom program 1 or 2.
4
When the key is inserted,
the manual mode will be
selected. To select a cus-
tom program, press the
MODE button repeatedly
until the custom 1 or 2 indi-
cator lights.
Note: To stop the program for a moment, press the
STOP button. The displays will pause and the
TIME display will begin to flash. To restart the pro-
gram, press the START or SPEED
+
button.
Press the START button or the SPEED + button
to start the program.
5
Press the STOP button, remove the key, and
then reinsert the key.
7
8
A moment after the button is pressed, the walking
belt will begin to move. Hold the handrails and
begin walking.
When you have programmed speed and incline
settings for as many one-minute periods as
desired, press the STOP button, remove the key,
and then reinsert the key. The speed and incline
settings that you have programmed and the length
of the program will be stored in memory. To use the
program again, see HOW TO USE CUSTOM PRO-
GRAMS on page 20.
Press the LEARN button and program the
desired speed and incline settings.
6
When the LEARN button is
pressed, the LEARN indic-
tor will light. Speed and in-
cline settings can be pro-
grammed only when the
indicator is lit.
When the program is completed, remove the
key.
See step 7 on page 16.
Each program is divided into one-minute periods.
One speed setting and one incline setting can be
19
Download from Www.Somanuals.com. All Manuals Search And Download.
When only three seconds remain in the first period
of the program, both the CURRENT PERIOD col-
umn and the column to the right will flash and
three tones will sound. All speed settings will then
move one column to the left. The speed setting
for the second period will then be shown in the
CURRENT PERIOD column and the speed and
incline of the treadmill will adjust to the second
settings that you programmed previously.
HOW TO USE CUSTOM PROGRAMS
Insert the key fully into the console.
1
See HOW TO TURN ON THE POWER on page
12.
Select user 1, 2, or 3.
2
3
The program will continue in this way until the
speed setting for the last period is shown in the
CURRENT PERIOD column and the TIME display
counts down to zero. The walking belt will then
slow to a stop.
See step 2 on page 13.
Enter your weight if desired.
If you have not entered your weight, see HOW TO
ENTER USER INFORMATION on page 12.
During the program, the speed and incline settings
of the current period can be adjusted with the
SPEED and INCLINE buttons. Adjustments will
not be stored in memory. To reprogram speed
and incline settings, press the LEARN button. The
LEARN indicator will light. Speed and incline set-
tings can be reprogrammed only when the in-
dicator is lit. Next, adjust the speed and incline of
the treadmill with the SPEED and INCLINE but-
tons. When the current period of the program is
completed, the new speed and incline settings will
be stored in memory. When you have repro-
grammed speed and incline settings for as many
periods as desired, press the LEARN button
again.
Select custom program 1 or 2.
4
When the key is in-
serted, the manual
mode will be selected.
To select a custom pro-
gram, press the MODE
button repeatedly until
the custom 1 or 2 indicator lights.
Press the START button or the SPEED + but-
ton to start the program.
5
A moment after the button is pressed, the walking
belt will begin to move. Hold the handrails and
begin walking.
To stop the program temporarily, press the STOP
button. The TIME display will begin to flash. To
restart the program, press the START button or
the SPEED + button. To end the program, press
the STOP button, remove the key, and then rein-
sert the key.
Each custom program is divided into one-minute
periods. One speed setting and one incline setting
are programmed for each period. The speed set-
ting for the
first period is
shown in the
Follow your progress with the LED displays.
CURRENT PERIOD
6
7
flashing CUR-
RENT PE-
RIOD column
of the LED
matrix. (The
incline
Refer to step 7 on page 14.
When the program is completed, remove the
key.
See step 7 on page 16.
settings are
not shown in
the matrix.)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
pressed, the TIME dis-
play will show the total
number of hours you
THE WORKOUT HISTORY MODE
have exercised. Note:
The console features a workout history mode that
keeps track of the total hours you have exercised, the
miles you have walked or run, the calories and fat
calories you have burned, and your average speed.
The console can display the totals for the previous 7
days or the totals since the workout history mode was
last reset.
The total will be rounded
off to the nearest hour. If
the total reaches 10,000 hours, the display will
reset to zero.
Press the 7-DAY button
or the TOTAL button
again. The SPEED/
PACE display will show
your average speed.
Enter the current time into the console.
1
If you have previously entered the current
time, go to step 2.
Press the 7-DAY button
or the TOTAL button
again. The DISTANCE/
LAPS display will show
the total number of miles
you have walked or run.
Note: The total will be rounded off to the nearest
mile. If the total reaches 1,000 hours, the display
will reset to zero.
For the workout history mode to be accurate, the
current time must be entered into the console. To
check the time setting, first hold down the STOP
button while inserting the key into the console.
The time setting will ap-
pear in the TIME display.
Note: The console uses
a 24-hour clock; if the
current time is 6:45 pm,
Press the 7-DAY button
or the TOTAL button
again. The CALS/
FAT CALS display will
show the total number of
calories you have burned.
Note: The total is shown in thousandths; if the dis-
play shows 1.02, for example, you have burned
1,020 calories. If the total reaches 10,000 calories,
the display will reset to zero.
the display should show
18:45.
To change the time set-
ting, first press the
LEARN button. The
minute digits in the TIME
display will begin to
flash. Press the USER +
or Ð button to set the
minute digits to the cor-
rect time. Press the LEARN button again. The
hour digits will begin to flash. Press the + or Ð but-
ton to enter the correct hour. Then, press the
LEARN button again. When the correct time is
shown, remove the key from the console and then
reinsert it. Note: Once the current time is entered,
it will be saved in memory, even when the power
cord is unplugged.
Press the 7-DAY button
or the TOTAL button
again. The CALS/
FAT CALS display will
show the total number of
fat calories you have
burned. Note: The total is shown in thousandths; if
the display shows 1.02, for example, you have
burned 1,020 fat calories. If the total reaches
10,000 fat calories, the display will reset to zero.
Select user 1, 2, or 3.
2
Reset the workout history mode if desired.
See step 2 on page 13.
5
6
To reset the workout history mode, press the HIS-
TORY RESET button. All displays will be reset to
zero.
If the walking belt is moving, press the STOP
button.
3
To access the workout history mode, the walking
belt must be stopped.
Exit the workout history mode.
To exit the workout history mode, press any button
on the console except the 7-DAY, TOTAL, or HIS-
TORY RESET button.
Press the 7-DAY button or the TOTAL button.
4
When the 7-DAY button or the TOTAL button is
21
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CONNECT YOUR PORTABLE STEREO
HOW TO CONNECT THE TREADMILL TO YOUR
CD PLAYER, VCR, OR COMPUTER
Note: If your stereo has an RCA-type AUDIO OUT
jack, see instruction A below. If your stereo has a
3.5mm LINE OUT jack, see instruction B. If your
stereo has only a PHONES jack, see instruction C.
To use iFIT.com CDÕs, the treadmill must be con-
nected to your portable CD player, portable stereo,
home stereo, or computer with CD player. See pages
22 and 23 for connecting instructions. To use iFIT.com
videocassettes, the treadmill must be connected to
your VCR. See page 24 for connecting instructions. To
use iFIT.com programs directly from our internet
site, the treadmill must be connected to your home
computer. See page 23 for connecting instructions.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter. Plug
the adapter into an AUDIO OUT jack on your stereo.
A
HOW TO CONNECT YOUR PORTABLE CD PLAYER
AUDIO OUT
RIGHT
LEFT
Note: If your CD player has separate LINE OUT and
PHONES jacks, see instruction A below. If your CD
player has only one jack, see instruction B.
Audio
Cable
Adapter
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your CD player. Plug your headphones into the
PHONES jack.
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your stereo.
A
PHONES LINE OUT
LINE OUT
PHONES
B
Head-
phones
Audio
Cable
LINE OUT
Audio
Cable
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your CD player. Plug your
headphones into the other side of the Y-adapter.
C. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your stereo. Plug your
headphones into the other side of the Y-adapter.
B
PHONES
C
PHONES
3.5mm
Y-adapter
Audio
Cable
PHONES
3.5mm
Y-adapter
Audio
Cable
Headphones
Headphones
22
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CONNECT YOUR HOME STEREO
HOW TO CONNECT YOUR COMPUTER
Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
Note: If your computer has a 3.5mm LINE OUT jack,
see instruction A. If your computer has only a
PHONES jack, see instruction B.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into the LINE OUT jack on your
stereo.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the LINE OUT jack on
your computer.
A
A
CD
LINE OUT
VCR
Amp
LINE OUT
Audio
Cable
LINE OUT
Audio
Cable
Adapter
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into a 3.5mm Y-adapter
(available at electronics stores). Plug the Y-adapter
into the PHONES jack on your computer. Plug your
headphones or speakers into the other side of the
Y-adapter.
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into an RCA Y-adapter (available
at electronics stores). Next, remove the wire that is
currently plugged into the LINE OUT jack on your
stereo and plug the wire into the unused side of the
RCA Y-adapter. Plug the RCA Y-adapter into the
LINE OUT jack on your stereo.
B
PHONES
B
CD
Audio
Cable
3.5mm
Y-adapter
VCR
Amp
LINE OUT
Headphones/Speakers
RCA
Y-adapter
Audio
Cable
Adapter
Wire removed from
LINE OUT jack
23
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CONNECT YOUR VCR
HOW TO USE IFIT.COM CD AND VIDEO
PROGRAMS
Note: If your VCR has an unused AUDIO OUT jack,
see instruction A below. If the AUDIO OUT jack is
being used, see instruction B. If you have a TV with
a built-in VCR, see instruction B. If your VCR is
connected to your home stereo, see HOW TO CON-
NECT YOUR HOME STEREO on page 23.
To use iFIT.com CDÕs or videocassettes, the treadmill
must be connected to your portable CD player, portable
stereo, home stereo, computer with CD player, or VCR.
See HOW TO CONNECT THE TREADMILL TO YOUR
CD PLAYER, VCR, OR COMPUTER on page 22.
Note: To purchase iFIT.com CDÕs or videocas-
settes, call toll-free 1-800-735-0768. Follow the steps
below to use an iFIT.com CD or video program.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into the AUDIO OUT jack on your
VCR.
Insert the key fully into the console.
1
A
See HOW TO TURN ON THE POWER on page 12.
ANT IN
.
VIDEO AUDIO
IN
RF OUT
CH
3
4
OUT
AUDIO OUT
Select user 1, 2, or 3.
2
RIGHT
LEFT
See step 2 on page 13.
Audio
Cable
Adapter
Select the iFIT.com mode.
3
When the key is in-
serted, the manual
mode will be selected.
To use an iFIT.com CD
or video program, press
the MODE button re-
peatedly until the iFIT.com indicator lights. The let-
ters ÒI FITÓ and three indicators will appear in the
LED matrix.
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into an RCA adapter (available at
electronics stores). Next, remove the wire that is
currently plugged into the AUDIO OUT jack on your
VCR and plug the wire into the unused side of the
RCA adapter. Plug the RCA adapter into the AUDIO
OUT jack on your VCR.
Insert the iFIT.com CD or videocassette.
4
If you are using an iFIT.com CD, insert the CD into
your CD player. If you are using an iFIT.com video-
cassette, insert the videocassette into your VCR.
B
ANT. IN
VIDEO AUDIO
IN
RF OUT
CH
3
4
OUT
Press the PLAY button on your CD player or
VCR.
5
A moment after the button is pressed, your personal
trainer will begin guiding you through your workout.
Simply follow your personal trainerÕs instructions.
Note: If the TIME display is flashing, press the
START button or the SPEED + button on the con-
sole. The treadmill will not respond to a CD or video
program when the TIME display is flashing.
RCA Adapter
Adapter
Audio
Cable
Wire removed from
AUDIO OUT jack
During the CD or video program, an electronic
ÒchirpingÓ sound will alert you when the speed
and/or incline of the treadmill is about to change.
CAUTION: Always listen for the ÒchirpÓ and be
prepared for speed and/or incline changes. In
some instances, the speed and/or incline may
change before the personal trainer describes
the change.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
If the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the SPEED or INCLINE buttons
on the console. However, when the next ÒchirpÓ
is heard, the speed and/or incline will change
to the next settings of the CD or video program.
¥ adjust the volume of your CD player or VCR. If
the volume is too high or too low, the console
may not detect the program signals.
¥ make sure that the audio cable is properly
connected, that it is fully plugged in, and that
it is not wrapped around a power cord.
To stop the walking belt at any time, press the
STOP button on the console. The TIME display
will begin to flash. To restart the program, press
the START button or the SPEED + button. After a
moment, the walking belt will begin to move at 1.0
mph. When the next ÒchirpÓ is heard, the
speed and incline will change to the next set-
tings of the CD or video program. The program
can also be stopped by pressing the stop button
on your CD player or VCR.
¥ if you are using your portable CD player and
the CD skips, set the CD player on the floor or
another flat surface instead of on the console.
Follow your progress with the LED displays.
6
7
See step 7 on page 14.
When the program is completed, remove the
key.
When the CD or video program is completed, the
walking belt will stop and the TIME display will
begin to flash. Note: To use another CD or video
program, press the STOP button or remove the
key and go to step 1 on page 24.
See step 7 on page 16.
CAUTION: Always remove iFIT.com CDÕs and
videocassettes from your CD player or VCR
when you are finished using them.
Note: If the speed or incline of the treadmill
does not change when a ÒchirpÓ is heard:
¥ make sure that the iFIT.com indicator is lit and
that the TIME display is not flashing. If the
TIME display is flashing, press the START
button or the SPEED + button on the console.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Follow the on-line instructions to start the
program.
HOW TO USE PROGRAMS DIRECTLY FROM
OUR INTERNET SITE
7
8
When you start the program, an on-screen count-
down will begin.
access a selection of programs that interactively con-
trol your treadmill to help you achieve your specific ex-
ercise goals. In addition, you can play iFIT.com audio
and video programs directly from the internet. By
adding an optional iFIT.com module to the console,
you can use virtually endless features from our internet
optional iFIT.com module, call toll-free 1-800-884-0620.
Return to the treadmill and stand on the foot
rails. Find the clip attached to the key and slide
the key onto the waistband of your clothing.
When the on-screen countdown ends, the program
will begin and the walking belt will begin to move.
Hold the handrails, step onto the walking belt, and
begin walking. During the program, an electronic
ÒchirpingÓ sound will alert you when the speed
and/or incline of the treadmill is about to change.
CAUTION: Always listen for the ÒchirpÓ and be
prepared for speed and/or incline changes.
To use programs from our internet site, the treadmill
must be connected to your home computer. See HOW
TO CONNECT YOUR COMPUTER on page 23. In
addition, you must have an internet connection and
an internet service provider. A list of specific system
requirements will be found on our internet site. Follow
the steps below to use a program from our internet site.
If the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the SPEED or INCLINE buttons
on the console. However, when the next ÒchirpÓ
is heard, the speed and/or incline will change
to the next settings of the program.
Insert the key fully into the console.
1
See HOW TO TURN ON THE POWER on page 12.
To stop the walking belt at any time, press the
STOP button on the console. The TIME display
will begin to flash. To restart the program, press
the START button or the SPEED + button. After a
moment, the walking belt will begin to move at 1.0
mph. When the next ÒchirpÓ is heard, the
speed and incline will change to the next set-
tings of the program.
Select user 1, 2, or 3.
2
See step 2 on page 13.
Select the iFIT.com mode.
3
When the key is in-
serted, the manual
mode will be selected.
To use an iFIT.com CD
or video program, press
the MODE button re-
When the program is completed, the walking belt
will stop and the TIME display will begin to flash.
Note: To use another program, press the STOP
button and go to step 5.
peatedly until the iFIT.com indicator lights. The
letters ÒI FITÓ and three indicators will appear in
the LED matrix.
Note: If the speed or incline of the treadmill
does not change when a ÒchirpÓ is heard, make
sure that the iFIT.com indicator is lit and that
the TIME display is not flashing. In addition,
make sure that the audio cable is properly con-
nected, that it is fully plugged in, and that it is
not wrapped around a power cord.
Go to your computer and start an internet
connection.
4
Start your web browser, if necessary, and go to
5
Follow your progress with the LED displays.
9
Follow the desired links on our internet site to
select a program.
6
See step 7 on page 14.
Read and follow the on-line instructions for using a
program.
When the program is completed, remove the
key.
10
See step 7 on page 16.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
1
Before folding the treadmill, adjust the incline to the
lowest position. If this is not done, the treadmill may be
permanently damaged. Next, unplug the power cord.
CAUTION: You must be able to safely lift 45 pounds (20
kg) in order to raise, lower, or move the treadmill.
1. Hold the treadmill with your hands in the locations shown
at the right. CAUTION: To decrease the possibility of in-
jury, bend your legs and keep your back straight. As
you raise the treadmill, make sure to lift with your legs
rather than your back. Raise the treadmill about halfway
to the vertical position.
2. Move your right hand to the position shown and hold the
treadmill firmly. Using your left hand, slide the lock knob
2
Open
to the left and hold it. Raise the treadmill until the lock pin
is aligned with the hole in the catch. Slowly release the
lock knob so that the lock pin slides into the catch. Make
sure that the lock pin is inserted into the catch.
Lock
Knob
Closed
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of
direct sunlight. Do not leave the treadmill in the stor-
age position in temperatures above 85¡ Fahrenheit.
Lock Pin
Catch
HOW TO MOVE THE TREADMILL
1Ð3
Before moving the treadmill, convert the treadmill to the stor-
age position as described above. Make sure that the lock-
ing pin is inserted into the left handrail.
Book Holder
1. Hold the handrails as shown and place one foot against
the hood only in the location shown. Do not hold or
push on the book holder or it may be damaged.
2. Tilt the treadmill back until it rolls freely on the wheels.
Carefully move the treadmill to the desired location. Never
move the treadmill without tipping it back. To reduce
the risk of injury, use extreme caution while moving
the treadmill. Do not attempt to move the treadmill
over an uneven surface.
Base
Hood
3. Place one foot on the base and carefully lower the tread-
mill until it is resting in the storage position.
HOW TO LOWER THE TREADMILL FOR USE
1. Refer to drawing 2 above. Hold the upper end of the treadmill with your right hand as shown. Using your left
hand, slide the lock knob to the left. Pivot the treadmill down until the frame is past the lock pin.
2. Refer to drawing 1 above. Hold the treadmill firmly with both hands and lower the treadmill to the floor.
CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE-SHOOTING
Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and
follow the steps listed. If further assistance is needed, please call our Customer Service Department toll-
free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).
PROBLEM: The power does not turn on
SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor
is plugged into a properly grounded outlet (see page 9). Use only a single-outlet surge suppres-
sor that is UL 1449 listed as a transient voltage surge suppressor (TVSS). The surge suppressor
must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation
of 450 joules. The surge suppressor must be electrically rated for 120 volts AC and 15 amps.
Important: The treadmill is not compatible with GFCI-equipped outlets.
b. After the power cord has been plugged in, make sure that the key is inserted into the console as
far as it will go.
c. Check the circuit breaker located on the treadmill
c
near the power cord. If the switch protrudes as
shown, the circuit breaker has tripped. To reset the
circuit breaker, wait for five minutes and then press
the switch back in.
Tripped
Reset
d
d. Check the on/off switch located on the treadmill
near the power cord. The switch must be in the on
position.
On
Position
PROBLEM: The power turns off during use
SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see c. above). If the
circuit breaker has tripped, wait for five minutes and then press the switch back in.
b. Make sure that the power cord is plugged in.
c. Remove the key from the console. Reinsert the key into the console as far as it will go.
d. Make sure that the on/off switch is in the on position.
e. If the treadmill still will not run, please call our Customer Service Department, toll-free.
PROBLEM: The walking belt slows when walked on
SOLUTION: a. Use only a UL-listed surge suppressor, rated at 15 amps, with a 14-gauge cord of five feet or less.
b. If the walking belt is overtightened, treadmill perfor-
mance may decrease and the walking belt may be
b
3ÓÐ4Ó
damaged. Remove the key and UNPLUG THE
POWER CORD. Using the allen wrench, turn both
rear roller adjustment bolts counterclockwise, 1/4 of a
turn. When the walking belt is properly tightened, you
should be able to lift each side of the walking belt 3 to
4 inches off the walking platform. Be careful to keep
the walking belt centered. Plug in the power cord, in-
sert the key and run the treadmill for a few minutes.
Repeat until the walking belt is properly tightened.
Rear Roller Adjustment Bolts
c. If the walking belt still slows when walked on, please call our Customer Service Department, toll-free.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEM: The walking belt is off-center
SOLUTION: a. If the walking belt has shifted to the left, first remove
the key and UNPLUG THE POWER CORD. Using
the allen wrench, turn the left rear roller adjustment
bolt clockwise, and the right bolt counterclockwise,
1/4 of a turn each. Be careful not to overtighten the
walking belt. Plug in the power cord, insert the key
and run the treadmill for a few minutes. Repeat until
the walking belt is centered.
a
b. If the walking belt has shifted to the right, first remove
the key and UNPLUG THE POWER CORD. Using
the allen wrench, turn the left rear roller adjustment
bolt counterclockwise, and the right bolt clockwise,
1/4 of a turn each. Be careful not to overtighten the
walking belt. Plug in the power cord, insert the key
and run the treadmill for a few minutes. Repeat until
the walking belt is centered.
b
PROBLEM: The walking belt slips when walked on
SOLUTION: a. If the walking belt slips when walked on, first remove
the key and UNPLUG THE POWER CORD. Using
the allen wrench, turn both rear roller adjustment
bolts clockwise, 1/4 of a turn. When the walking belt
is correctly tightened, you should be able to lift each
side of the walking belt 3 to 4 inches off the walking
platform. Be careful to keep the walking belt centered.
Plug in the power cord, insert the key and carefully
walk on the treadmill for a few minutes. Repeat until
the walking belt is properly tightened.
a
PROBLEM: The heart rate monitor does not function properly
SOLUTION: a. If the heart rate monitor does not function properly, refer to HEART RATE MONITOR TROUBLE-
SHOOTING on page 7.
b. If the heart rate monitor still does not function properly, the battery
should be changed. To replace the battery, locate the battery cover
b
on the back of the sensor unit. Insert a coin into the slot in the cover
and turn the cover counterclockwise to the ÒopenÓ position. Remove
the cover.
Next, remove the old battery from the sensor unit. Insert a new CR
2032 battery, making sure that the writing is on top. In addition, make
sure that the rubber gasket is in place in the sensor unit. Replace the
battery cover and turn it to the closed position.
CR2032
Battery
Rubber
Gasket
29
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEM: The displays and indicators on the console remain lit after the key is removed
SOLUTION: a. Hold down the STOP button while inserting the key into the console.
a
Make sure that there is not a letter ÒdÓ in the CALS/FAT CALS
display. If a ÒdÓ appears in the display, the console is in the ÒdemoÓ
mode. This mode is intended to be used only when a treadmill is dis-
played in a store. When the console is in the demo mode, the power
cord can be plugged in, the key can be removed from the console,
and the displays and indicators on the console will automatically light
in a preset sequence, although the buttons on the console will not operate. If a ÒdÓ appears in the
CALS/FAT CALS display, press the SPEED Ð button so the display is blank. Then, remove
the key from the console.
PROBLEM: The displays of the console do not function properly
SOLUTION: a. Remove the key from the console and unplug the
a
power cord. Next, remove the two Short Hood
Screws (118) from the Motor Hood (62). Pivot the
Uprights (39) in the direction shown by the arrow until
the handles are resting on the floor. Note: It will be
easier and safer if two people perform this opera-
tion.
118
41
39
62
Locate the two Screws (41) in the space between the
front edge of the Motor Hood (62) and the treadmill.
Remove the Screws.
118
Return the Uprights (39) to the vertical position. Lift off the Motor Hood (62), being careful not to
damage the hook and loop fasteners on the front of the belly pan.
Locate the Reed Switch (59) and the Magnet (117) on
the left side of the Pulley (6). Turn the Pulley until the
1/8Ó
64
Magnet is aligned with the Reed Switch. Make sure
that the gap between the Magnet and the Reed
Switch is about 1/8Ó. If necessary, loosen the Screw
(64) and move the Reed Switch slightly. Retighten the
Screw.
6
59
117
Top
View
Re-attach the Motor Hood (62) and run the treadmill
for a few minutes to check for a correct speed reading.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
REEBOK UNIVERSITY
Reebok University was launched in 1993 to fulfill a
vision to establish a Òuniversity without wallsÓ that
develops quality, researched, state-of-the-art fitness
programming for the fitness industry throughout the
world.
WALKING AND REDUCED RISK FOR CARDIOVAS-
CULAR DISEASE
Several studies have found that regular walking at any
speed can increase HDL-C cholesterol (a high-density
lipoprotein which removes excess cholesterol from the
body) and can lower concentrations of blood triglyc-
erides (a storage form of fat), thus reducing the risk for
Working with the worldÕs best professionals, Reebok
University has created a host of original programs,
such as Step Reebok¨, Walk ReebokSM, Slide ReebokSM cardiovascular disease.
and Reebok City JamSM. The industry has adopted
Reebok programming as the ÒgoldÓ standard. Our
guidelines and terminology are used by fitness profes-
sionals and participants around the world, and our
exceptional programming has been approved in the
United States by AFAA and ACE for continuing educa-
tion credits.
Duncan and his colleagues3 concluded that exercise
does not have to be vigorous to reduce cardiovascular
risk factors. In other words, people who choose to
stroll rather than walk briskly can reduce their risk for
cardiovascular disease.
After studying the physical activity patterns of 17,000
Harvard alumni over a 20-year period, Paffenbarger
and his colleagues4 concluded that walking as little as
five city blocks per day can reduce the risk of cardio-
vascular disease, and walking 2 miles per day can
reduce the risk of a heart attack by 28% or more.
Therefore, while walking at a fast pace will improve
aerobic fitness, walking at any speed (slow or fast) can
reduce a person's risk for heart disease.
WALKING AND CARDIORESPIRATORY
ENDURANCE
Scientific studies confirm that
walking at a moderate to brisk
pace can enhance aero-
bic fitness. Rippe and
his colleagues1 found
that of 500 subjects
tested, 67% of the men
and 90% of the women
were able to reach their
target heart rates by
walking 4 to 4.5 miles
per hour.
WALKING AND WEIGHT REDUCTION
Walking is an excellent activity for burning calories.
The steeper the incline and/or the faster the speed, the
more calories are burned. For example, a 150-pound
person walking at 3.5 miles per hour on flat ground will
burn about 300 calories per hour. This same person
will burn 400 calories per hour on a gentle 4% incline
and 500 calories per hour on a steeper 10% incline. If
this person speeds the pace up to 4 miles per hour on
level ground, 350 calories will be burned in one hour.5
Pollock and his colleagues2 found that middle-aged
men who walked at a pace of 3.5 to 4.5 miles per hour
for 40 minutes four times per week had the same car-
diovascular improvements as men the same age who
jogged for 30 minutes three times per week. Although
the intensity of exercise was lower for the walkers than
the runners, the increased duration and frequency of
walking provided the walkers with similar aerobic ben-
efits as the runners.
It should be noted that participants who do not wish to
walk at faster speeds can burn a comparable number
of calories by walking for longer periods of time.
WALKING AND BONE DENSITY
Osteoporosis is a major health problem in the United
States, affecting an estimated 15 to 30 million people.
An age-related disorder, osteoporosis reduces the
density of bones. This disease can be life-threatening
since many older people die as a result of complica-
tions suffered from broken bones. Adequate calcium in
the diet and weight-bearing exercises seem to reduce
the risk of osteoporosis.
On the basis of current research, it seems clear that
walking at a moderate to brisk pace can be an excel-
lent aerobic activity.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Several studies have reported that regular walking at
moderate to brisk speeds appears to increase bone
density. Specifically, Fradin and his colleagues6 found
that 70-year-old subjects who walked at least 30 min-
utes per day had higher bone mineral content than
subjects who walked less than 30 minutes per day.
Jones and his colleagues7 reported that sedentary
women (aged 30 to 61 years old) who began a regular
walking program and continued for one year increased
their bone density.
During a 24-week study, not one of 59 participants
who walked five days a week at speeds between 3 and
5 miles per hour sustained a walking-related injury that
necessitated consulting with a physician. Carroll and
his colleagues10 reported that 14% of the elderly sub-
jects participating in a walking study suffered training-
related orthopedic injuries, mostly to the lower leg and
foot. The majority of injuries occurred in the group as-
signed to "fast walking."
It is important to note that all forms of exercise have
some degree of risk associated with the activity.
Generally, the less mechanical stress on the muscu-
loskeletal system, the less risk of becoming injured.
Because of the low-impact nature of walking, the inci-
dence of injury appears to be low when compared to
other high-impact activities.
Since walking can be comfortably performed by people
of any age, walking appears to be practical and effec-
tive in reducing a person's risk for developing osteo-
porosis.
WALKING AND STRESS REDUCTION
There are many stressors in today's society, including
economic concerns, work-related pressures and the
need to balance career goals with home responsibili-
ties. People who are unable to cope with these types
of stressors are often tense and anxious, and may
even become physically or psychologically ill.
REFERENCES
1. Rippe, J., Ross, J., et. al. ÒCardiovascular effects of walking.Ó
(Abstract), Proceedings of the Second International Conference
on Physical Activity, Aging and Sports, July, 1985, p. 47.
2. Pollock, M., Miller, H. Jr., et. al. ÒEffects of walking on body com-
position and cardiovascular function of middle-aged men.Ó
Journal of Applied Physiology, 1971, 30:126Ð130.
3. Duncan, J., Gordon, N., et. al. ÒWomen walking for health and fit-
ness. How much is enough?Ó Journal of the American Medical
Association, 1991, 266(23):3295Ð9.
4. Paffenbarger, R., Hyde, R., et.al. ÒPhysical activity, all-cause
mortality and longevity of college alumni.Ó New England Journal
of Medicine, 1986, 314:605Ð613.
Researchers have found that exercise is one way to
help people reduce stress. For example, subjects who
engaged in a regular aerobic conditioning program and
who altered their diets experienced significant gains in
self-concept, feelings of well-being and reduced
depression.8
5. ÒBetter walking workouts.Ó University of California at Berkeley
Wellness Letter, 1992, 8(12):4Ð5.
6. Fradin, K. Grimby, G., et. al. ÒWalking habits and health-related
factors in a 70-year-old population,Ó Gerontology, 1991,
37(5):281Ð8.
7. Jones, P., Hardman, A., et. al. ÒInfluence of brisk walking on the
broadband ultrasonic attenuation of the calcaneus in previously
sedentary women aged 30Ð61 years.Ó Calcified Tissue
International, 1991, 49(2):112Ð5.
Cramer and his colleagues9 specifically examined the
effect of brisk walking on mildly obese sedentary
women and found that walking improved general psy-
chological well-being. Walking therefore appears to be
an effective tool for improving psychological well-being.
8. Blair, S., Collingwood, T., et. al. ÒHealth Promotion for Educators:
Impact on Health Behaviors, Satisfaction, and General Well-
Being,Ó American Journal of Public Health, 1984, 74:147Ð49.
9. Cramer, S., Nieman D., et. al. ÒThe effects of moderate exercise
training on psychological well-being and mood state in women.Ó
Journal of Psychosomatic Research, 1991, 35(4Ð5):437Ð49.
10. Carroll, J., Pollack, M., et. al. ÒIncidence of injury during moder-
ate and high intensity walking in the elderly.Ó Journal of
Gerontology, 1992, 47(3):M61Ð6.
WALKING AND INJURIES
Walking is often associated with a low injury rate.
Walking is considered to be a "low impact" activity be-
cause one foot remains in contact with the ground at
all times. Walking at speeds of 3 miles per hour pro-
duces vertical impact forces that are around 1.25 times
body weight, whereas running at 7 miles per hour in-
creases vertical impact forces to more than 2.5 times
body weight.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE GUIDELINES
During the first few minutes of exercise, your body
uses easily accessible carbohydrate calories for en-
ergy. Only after the first few minutes does your body
begin to use stored fat calories for energy. If your goal
is to burn fat, adjust the speed or incline of the tread-
mill until your heart rate is near the lowest number in
your training zone.
WARNING:
Before beginning this
or any exercise program, consult your physi-
cian. This is especially important for individu-
als over the age of 35 or individuals with pre-
existing health problems.
The heart rate monitor is not a medical de-
vice. Various factors, including the user's
movement, may affect the accuracy of heart
rate readings. The heart rate monitor is in-
tended only as an exercise aid in determining
heart rate trends in general.
For maximum fat burning, adjust the speed or incline
of the treadmill until your heart rate is near the middle
number in your training zone.
Aerobic Exercise
If your goal is to strengthen your cardiovascular sys-
tem, your exercise must be Òaerobic.Ó Aerobic exercise
is activity that requires large amounts of oxygen for pro-
longed periods of time. This increases the demand on
the heart to pump blood to the muscles and on the
lungs to oxygenate the blood. For aerobic exercise, ad-
just the speed or incline of the treadmill until your heart
rate is near the highest number in your training zone.
The following guidelines will help you to plan your ex-
ercise program. RememberÑthese are general guide-
lines only. For more detailed exercise information, ob-
tain a reputable book or consult your physician.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
WORKOUT GUIDELINES
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recom-
mended heart rates for fat burning and aerobic exercise.
Each workout should include the following three parts:
A Warm-upÑStart each workout with 5 to 10 minutes
of stretching and light exercise. A proper warm-up in-
creases your body temperature, heart rate and circula-
tion in preparation for exercise.
Training Zone ExerciseÑAfter warming up, increase
the intensity of your exercise until your heart rate is in
your training zone for 20 to 60 minutes. (During the
first few weeks of your exercise program, do not keep
your heart rate in your training zone for longer than 20
minutes.) Breathe regularly and deeply as you exer-
ciseÑnever hold your breath.
To find the proper heart rate for you, first find your age
near the bottom of the chart (ages are rounded off to
the nearest ten years). Next, find the three numbers
above your age. The three numbers define your Òtrain-
ing zone.Ó The lower two numbers are recommended
heart rates for fat burning; the higher number is the
recommended heart rate for aerobic exercise.
A Cool-downÑFinish each workout with 5 to 10 min-
utes of stretching to cool down. This will increase the
flexibility of your muscles and will help prevent post-ex-
ercise problems.
EXERCISE FREQUENCY
You can measure your heart rate using the heart rate
monitor. If your heart rate is too high or too low, adjust
the speed or incline of the treadmill accordingly.
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months, you may
complete up to five workouts each week if desired.
Fat Burning
To burn fat effectively, you must exercise at a relatively
low intensity level for a sustained period of time.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LISTÑMODEL NO. RBTL19900
R1100A
To locate the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual.
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
1
1
1
1
2
1
4
2
2
33
4
1
1
1
1
1
1
1
1
1
1
2
3
1
1
1
1
1
1
1
1
1
4
2
14
1
1
1
1
1
39
2
2
1
1
1
2
1
1
1
Left Foot Rail
51
52
53
54
55
56
57
58*
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
1
1
2
4
2
1
1
1
1
1
1
1
1
22
1
4
2
1
1
1
1
2
1
1
4
4
1
2
1
1
1
1
1
1
1
1
1
1
2
2
1
4
2
1
1
6
1
2
4
1
12Ó Audio Wire
iFIT.com Audio Cable
Foam Grip
Motor Nut
Static Warning Decal
Motor
Motor Controller Wire
Motor/Pulley/Flywheel/Fan
Reed Switch/Sensor Wire
Chest Strap
Incline Motor Bolt (Lower)
Motor Hood
Controller
Front Roller Nut
Front Left Endcap
Key/Clip
Frame Pivot Spacer
Front Roller/Pulley
Platform Screw
Belt Guide
Caution Decal
Isolator Spacer Screw
Isolator
Rear Foot (Right)
Walking Belt
Walking Platform
Latch Catch
Latch Assembly
Lock Knob
Lock Knob Sleeve
Lock Knob Spring
Lock Pin Collar
Frame
Rear Roller Adj. Bolt
Roller Adj. Washer
Right Rear Endcap
8Ó Cable Tie
Transformer Wire Harness (3 Wire)
Releasable Wire Tie
Reed Switch Clip
Tie Clamp
Belly Pan
Latch Decal
Rear Foot (Left)
Platform Screw (Front)
Frame Bolt
Belly Pan Fastener
Front Right Endcap
Ground Screw
Ground Wire
Upright/Base
Pin Clip
Screw
Left Pulse Pad
Right Pulse Pad
Console Base
Motor Belt
Console Base
Motor Tension Bolt
Reading Rack
Lock Pin
9
10
11
12
13
14
15
16*
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Electronics Screw
Power Supply
Plastic Stand-Off
Hood Bracket (Front)
Electronics Plate
Hood Support Bracket
Motor Adj. Bolt
Lift Frame
Hood Bracket (Side)
Heart Rate Monitor
Motor Isolator Plate
Motor Bolt
Motor Isolator
Motor Adj. Washer
Incline Motor Bolt
Front Roller Adj. Bolt
Allen Wrench
Tie Clamp Screw
Incline Motor
Front Belly Pan
Power Cord
On/Off Switch
Circuit Breaker
Power Cord Grommet
Incline Motor Shield
Front Wheel Bolt
Front Wheel
Right Foot Rail
Bumper
Grommet
Wire Harness
Shock
Wheel Nut
Rear Roller
Upright Endcap
Upright Endcap Screw
Left Rear Endcap
Incline Stop Bracket
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Key No. Qty.
Description
Key No. Qty.
Description
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119**
120**
121**
122
123
2
2
1
2
1
1
1
1
2
1
2
1
8
1
1
1
1
2
1
1
1
4
2
Nylon Washer
Wheel Spacer
Console
Motor Tension Washer
Motor Star Washer
Motor Pivot Bolt
Motor Pivot Nut
124
125
126
#
#
#
#
#
#
#
3
1
2
1
1
1
1
1
1
1
1
1
Latch Catch Screw
Transformer
Wheel Bushing
8Ó Blue Wire, 2 F
8Ó Blue Wire, M/F
14Ó White Wire, 2 F
8Ó White Wire, M/F
4Ó Red Wire, M/F
4Ó Black Wire M/F
4Ó Black Wire, 2 F
8Ó Green Wire, F/Ring
User's Manual
Motor Bracket
Motor Tension Nut
Motor Adj. Nut
Hood Fastener
#
#
Jack
Console Base Screw (Side)
Transformer Wire Harness (2 Wire)
Pulse Receiver Extension Wire
Pulse Receiver
* Includes all parts shown in the box
# These parts are not illustrated
Magnet
Short Hood Screw
iFIT.com Module
iFIT.com CD
iFIT.com Videocassette
Isolator Spacer
Rear Endcap Spacer
**These parts are optional. For information about the
iFIT.com module, call toll-free 1-800-884-0620. For
information about iFIT.com CDÕs or videocassettes,
call toll-free 1-800-735-0768
Specifications are subject to change without notice
HOW TO ORDER REPLACEMENT PARTS
To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to give
the following information:
¥ The MODEL NUMBER of the product (RBTL19900)
¥ The NAME of the product (REEBOK¨ RBX 600 treadmill)
¥ The SERIAL NUMBER of the product (see the front cover of this manual)
¥ The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 34 and this page and the
EXPLODED DRAWING attached in the center of this manual).
35
Download from Www.Somanuals.com. All Manuals Search And Download.
.
G R O U P
L I T
K i r k N P i R
e
O b D e U r g C T l l
a
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
WHAT IS COVEREDÑThe entire REEBOK¨ RBX 600 (ÒProductÓ) is warranted to be free of all defects in material and
workmanship.
WHO IS COVEREDÑThe original purchaser or any person receiving the Product as a gift from the original purchaser.
HOW LONG IS IT COVEREDÑICON Health & Fitness, Inc. (ÒICONÓ), warrants the motor for five years after the date of
purchase. The belt and deck are covered for two years after the date of purchase. All mechanical components are covered
for two years after the date of purchase. All electrical components are covered for two years after the date of purchase.
Labor is covered for one year.
WHAT WE DO TO CORRECT COVERED DEFECTSÑWe will ship to you, without charge, any replacement part or com-
ponent, providing the repairs are authorized by ICON first and are performed by an ICON trained and authorized service
provider, or, at our option, we will replace the Product.
WHAT IS NOT COVEREDÑAny failures or damage caused by unauthorized service, misuse, accident, negligence, im-
proper assembly or installation, alterations, modifications without our written authorization or by failure on your part to use,
operate, and maintain as set out in your UserÕs Manual (ÒManualÓ).
WHAT YOU MUST DOÑAlways retain proof of purchase, such as your bill of sale; store, operate, and maintain the
Product as specified in the Manual; notify our Customer Service Department of any defect within 10 days after discovery of
the defect; as instructed, return any defected part for replacement or, if necessary, the entire product, for repair.
USERÕS MANUALÑIt is VERY IMPORTANT THAT YOU READ THE MANUAL before operating the Product. Remember to
do the periodic maintenance requirements specified in the Manual to assure proper operation and your continued satisfac-
tion.
HOW TO GET PARTS AND SERVICEÑSimply call our Customer Service Department at 1-800-999-3756 and tell them
your name and address and the serial number of your Product. They will tell you how to get a part replaced, or if necessary,
arrange for service where your Product is located or advise you how to ship the Product for service. Before shipping, al-
ways obtain a Return Authorization Number (RA No.) from our Customer Service Department; securely pack your Product
(save the original shipping carton if possible); put the RA No. on the outside of the carton and insure the product. Include a
letter explaining the product or problem and a copy of your proof of purchase if you believe the service is covered by war-
ranty.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use
or performance of the product or damages with respect to any economic loss, loss of property, loss of revenues or profits,
loss of enjoyment or use, costs of removal, installation or other consequential damages of whatsoever nature. Some states
do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not
apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or
fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow
limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to you.
No one is authorized to change, modify or extend the terms of this limited warranty.
This warranty gives you specific legal rights and you may have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 167658 R1100A
Printed in USA © 2000 ICON Health & Fitness, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|