Reebok Fitness Treadmill RBTL17910 User Guide

®
Patent Pending  
Model No. RBTL17910  
Serial No.  
USER'S MANUAL  
Write the serial number in the space  
above for future reference.  
Serial Number  
Decal  
QUESTIONS?  
If you have questions, or if there  
are missing or damaged parts,  
we will guarantee complete sat-  
isfaction through direct assis-  
tance from our factory.  
TO AVOID UNNECESSARY DE-  
LAYS, PLEASE CALL DIRECT TO  
OUR TOLL-FREE CUSTOMER  
HOT LINE. The trained techni-  
cians on our Customer Hot Line  
will provide immediate assis-  
tance, free of charge to you.  
CUSTOMER HOT LINE:  
1-800-999-3756  
Mon.–Fri., 6 a.m.–6 p.m. MST  
CAUTION  
Read all precautions and instruc-  
tions in this manual before using  
this equipment. Save this man-  
ual for future reference.  
Visit our website at  
®
new products, prizes,  
®
fitness tips, and much more!  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT PRECAUTIONS  
WARNING:  
To reduce the risk of burns, fire, electric shock, or injury to persons, read the  
following important precautions and information before operating the treadmill.  
1. It is the responsibility of the owner to ensure  
that all users of this treadmill are adequately  
informed of all warnings and precautions.  
12. Failure to use a properly functioning surge  
suppressor could result in damage to the con-  
trol system of the treadmill. If the control sys-  
tem is damaged, the walking belt may change  
speed or stop unexpectedly, which may result  
in a fall and serious injury.  
2. Use the treadmill only as described in this  
manual.  
3. Place the treadmill on a level surface, with at  
least eight feet of clearance behind it and two  
feet on each side. Do not place the treadmill  
on any surface that blocks air openings. To  
protect the floor or carpet from damage, place  
a mat under the treadmill.  
13. Keep the power cord and the surge suppres-  
sor protector away from heated surfaces.  
14. Never move the walking belt while the power  
is turned off. Do not operate the treadmill if  
the power cord or plug is damaged, or if the  
treadmill is not working properly. (See  
BEFORE YOU BEGIN on page 5 if the tread-  
mill is not working properly.)  
4. Keep the treadmill indoors, away from mois-  
ture and dust. Do not put the treadmill in a  
garage or covered patio, or near water.  
15. Never start the treadmill while you are stand-  
ing on the walking belt. Always hold the  
handrails while using the treadmill.  
5. Do not operate the treadmill where aerosol  
products are used or where oxygen is being  
administered.  
16. The treadmill is capable of high speeds. Adjust  
the speed in small increments to avoid sudden  
jumps in speed.  
6. Keep children under the age of 12 and pets  
away from the treadmill at all times.  
7. The treadmill should not be used by persons  
weighing more than 275 pounds.  
17. To reduce the possibility of the treadmill over-  
heating, do not operate the treadmill continu-  
ously for longer than one hour.  
8. Never allow more than one person on the  
treadmill at a time.  
18. The heart rate monitor is not a medical de-  
vice. Various factors, including the user's  
movement, may affect the accuracy of heart  
rate readings. The heart rate monitor is in-  
tended only as an exercise aid in determining  
heart rate trends in general.  
9. Wear appropriate exercise clothing when  
using the treadmill. Do not wear loose cloth-  
ing that could become caught in the treadmill.  
Athletic support clothes are recommended for  
both men and women. Always wear athletic  
shoes. Never use the treadmill with bare feet,  
wearing only stockings, or in sandals.  
19. Never leave the treadmill unattended while it  
is running. Always remove the key, unplug  
the power cord and move the on/off switch to  
the off position when the treadmill is not in  
use. (See the drawing on page 5 for the loca-  
tion of the on/off switch.)  
10. When connecting the power cord (see page 9),  
plug the power cord into a surge suppressor  
(not included) and plug the surge suppressor  
into a grounded circuit capable of carrying 15  
or more amps. No other appliance should be on  
the same circuit. Do not use an extension cord.  
20. Do not raise, lower, or move the treadmill  
until it is properly set up. (See HOW TO SET  
UP THE TREADMILL on page 6 and HOW TO  
FOLD AND MOVE THE TREADMILL on page  
27.) You must be able to safely lift 45 pounds  
(20 kg) to raise, lower, or move the treadmill.  
11. Use only a single-outlet surge suppressor that  
meets all of the specifications described on  
page 9. To purchase a surge suppressor, see  
your local REEBOK dealer or call 1-800-806-  
3651 and order part number 146148.  
21. Do not change the incline of the treadmill by  
placing objects under the treadmill.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
22. When folding or moving the treadmill, make  
sure that the storage latch is fully closed.  
26. Always remove iFIT.com CD’s and videos  
from your CD player or VCR when you are not  
using them.  
23. Inspect and properly tighten all parts of the  
treadmill regularly.  
27. Never drop or insert any object into any  
opening.  
24. When using iFIT.com CD’s and videos, an  
electronic “chirping” sound will alert you  
when the speed and/or incline of the treadmill  
is about to change. Always listen for the  
“chirp” and be prepared for speed and/or in-  
cline changes. In some instances, the speed  
and/or incline may change before the per-  
sonal trainer describes the change.  
28. This treadmill is intended for home use only.  
Do not use this treadmill in any commercial,  
rental, or institutional setting.  
29.  
DANGER:  
Always unplug the power  
cord immediately after use, before cleaning  
the treadmill, and before performing the main-  
tenance and adjustment procedures de-  
scribed in this manual. Never remove the  
motor hood unless instructed to do so by an  
authorized service representative. Servicing  
other than the procedures in this manual  
should be performed by an authorized service  
representative only.  
25. When using iFIT.com CD’s and videos, you  
can manually override the speed and incline  
settings by pressing the speed and incline  
buttons. However, when the next “chirp” is  
heard, the speed and/or incline will change to  
the next settings of the CD or video program.  
WARNING:  
Before beginning this or any exercise program, consult your physician. This  
is especially important for persons over the age of 35 or persons with pre-existing health problems.  
Read all instructions before using. ICON assumes no responsibility for personal injury or property  
damage sustained by or through the use of this product.  
SAVE THESE INSTRUCTIONS  
The decals shown here have been placed on  
the treadmill. If a decal is missing, or if it is not  
legible, please call our Customer Service  
Department, toll-free, to order a free replace-  
ment decal (see HOW TO ORDER REPLACE-  
MENT PARTS on page 35 of this manual).  
Apply the decal in the location shown.  
Note: The decal below is shown at 38% of actual size.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE YOU BEGIN  
Thank you for selecting the new REEBOK® V 4000  
treadmill. The V 4000 treadmill combines advanced  
technology with innovative design to let you enjoy an  
excellent form of cardiovascular exercise in the conve-  
nience and privacy of your home. And when you’re not  
exercising, the unique V 4000 can be folded up, requir-  
ing less than half the floor space of other treadmills.  
at 1-800-999-3756, Monday through Friday, 6 a.m.  
until 6 p.m. Mountain Time (excluding holidays). To  
help us assist you, please mention the product model  
number and serial number when calling. The model  
number is RBTL17910. The serial number can be  
found on a decal attached to the treadmill (see the  
front cover of this manual for the location).  
For your benefit, read this manual carefully before  
using the treadmill. If you have additional questions,  
please call our Customer Service Department toll-free  
Before reading further, please review the drawing  
below and familiarize yourself with the parts that are  
labeled.  
Reading Rack  
Water Bottle  
Holder (Bottle  
not included)  
Console  
Handrail  
Upright  
Key/Clip  
Lock Knob  
On/Off Switch  
Circuit Breaker  
Walking Belt  
Foot Rail  
Power Cord  
Rear Roller  
Adjustment Bolt  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO SET UP THE TREADMILL  
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not  
dispose of the packing materials until assembly is completed. A rubber mallet  
may be needed for  
assembly.  
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a  
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal  
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off  
the lubricant with a soft cloth and a mild, non-abrasive cleaner.  
1. With the help of a second person, carefully raise the  
1
Uprights (65) until the treadmill is in the position shown.  
65  
2. Press the Lock Knob Sleeve (68) into the left Upright  
(65). If necessary, use a rubber mallet to tap the Lock  
Knob Sleeve into the Upright.  
2
Remove the Lock Knob (67) from the Lock Pin (72).  
Make sure that the Lock Pin Collar (70) and the Spring  
(69) are on the Lock Pin. (Note: If there are two Lock Pin  
Collars, place them on each side of the Spring.) Insert  
the Lock Pin into the left Upright (65) and tighten the  
Lock Knob onto the Lock Pin.  
65  
67  
69  
70  
68  
72  
3. Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a  
secure place. The allen wrench is used to adjust the walking belt (see pages 28 and 29). To protect the floor or  
carpet from damage, place a mat under the treadmill.  
HOW TO ADJUST THE CUSHIONING SYSTEM  
The treadmill features a cushioning system that reduces the  
impact as you walk or run on the treadmill. The firmness of  
the cushioning system is controlled by the adjustable cush-  
ions at the center of the treadmill (there is one adjustable  
cushion on each side). To select the maximum firmness set-  
ting, turn the cushions to level 3; to decrease the firmness,  
turn the cushions to level 2 or 1. It may be helpful to lift on  
the walking platform as you rotate the cushion. Note: The  
faster you run on the treadmill, or the heavier your  
Adjustable Cushion  
weight, the firmer the cushioning system should be.  
Make sure that both cushions are at the same setting.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE THE HEART RATE MONITOR  
HOW TO PUT ON THE HEART RATE MONITOR  
HEART RATE MONITOR CARE AND MAINTENANCE  
Before you use the heart rate monitor, please read all  
instructions on this page and the following page.  
• Thoroughly dry the heart rate monitor after each  
use. The heart rate monitor is activated when the  
electrode areas are wetted and the heart rate  
monitor is put on; the heart rate monitor shuts off  
when it is removed and the electrode areas are  
dried. If the heart rate monitor is not dried after each  
use, it may remain activated longer than necessary,  
draining the battery prematurely.  
The heart rate mon-  
1
itor consists of two  
components: the  
chest strap and the  
sensor unit.  
Chest Strap  
See drawing 2 and  
attach the chest  
strap to the sensor  
unit. Insert one of  
the tabs on the  
chest strap through  
one end of the sen-  
sor unit. Make sure  
to press the end of  
the sensor unit  
• Store the heart rate monitor in a warm, dry place. Do  
not store the heart rate monitor in a plastic bag or  
other container that may trap moisture.  
• Do not expose the heart rate monitor to direct  
sunlight for extended periods of time  
Sensor Unit  
Tab  
• Do not expose the heart rate monitor to tempera-  
tures above 122° Fahrenheit (50° Celsius) or below  
14° Fahrenheit (-10° Celsius).  
2
under the buckle on  
the chest strap—  
the tab should be  
almost flush with  
the sensor unit.  
• Do not excessively bend or stretch the sensor unit  
when using or storing the heart rate monitor.  
Sensor  
Unit  
Buckle  
• Clean the sensor unit periodically using a damp  
cloth; never use alcohol, abrasives, or chemicals.  
The chest strap may be hand washed and air dried.  
Next, wrap the heart  
rate monitor around  
your chest and at-  
tach the other end of  
the chest strap to  
the sensor unit.  
Adjust the length of  
the chest strap, if  
necessary.  
HEART RATE MONITOR TROUBLESHOOTING  
The instructions on the following pages explain  
how the heart rate monitor is used with the console.  
If the letters “PLS” appear in the PULSE display or if  
the displayed heart rate is excessively high or low,  
try the steps below.  
• Make sure that you are wearing the heart rate moni-  
tor exactly as described at the left. If the heart rate  
monitor does not function properly when positioned  
as described, move it slightly lower or higher on your  
chest.  
The heart rate moni-  
tor should be under  
your clothing, tight  
against your skin, and as high under the pectoral mus-  
cles or breasts as is comfortable. Make sure that the  
logo on the sensor unit is facing forward and is right-  
side-up.  
• Use saline solution such as saliva or contact lens  
solution to wet the two electrode areas on the  
sensor unit. If heart rate readings do not appear until  
you begin perspiring, re-wet the electrode areas.  
Pull the sensor unit away from your body a few inches  
and locate the two electrode areas on the inner side.  
The electrode areas are the areas covered by shallow  
ridges. Using saline solution such as saliva or contact  
lens solution, wet both electrode areas. Return the  
sensor unit to a position against your chest.  
• As you walk or run on the treadmill, position your-  
self near the center of the walking belt. For the  
console to display heart rate readings, the user  
must be within arm’s length of the console.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
• The heart rate monitor is designed to work with  
people who have normal heart rhythms. Heart rate  
reading problems may be caused by medical  
conditions such as premature ventricular contrac-  
tions (pvcs), tachycardia bursts, and arrhythmia.  
Locate the battery cover  
on the back of the sen-  
sor unit. Insert a coin  
into the slot in the cover  
and turn the cover coun-  
terclockwise to the  
• The operation of the heart rate monitor can be  
affected by magnetic interference caused by high  
power lines or other sources. If it is suspected that  
this is a problem, try relocating the treadmill.  
“open” position. Remove  
the cover.  
Remove the old battery  
from the sensor unit.  
Insert a new CR 2032  
battery, making sure  
that the writing is on top.  
In addition, make sure  
that the rubber gasket is  
in place in the sensor  
unit. Replace the battery  
cover and turn it to the  
closed position.  
• The CR2032 battery may need to be replaced.  
Follow the steps at the right to replace the battery.  
CR2032  
Battery  
Rubber  
Gasket  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
TREADMILL OPERATION  
THE PERFORMANT LUBETM WALKING BELT  
an equipment-grounding conductor and a grounding  
plug. Plug the power cord into a surge suppressor,  
and plug the surge suppressor into an appropriate  
outlet that is properly installed and grounded in  
accordance with all local codes and ordinances.  
Important: The treadmill is not compatible with  
GFCI-equipped outlets.  
Your treadmill features a walking belt coated with  
PERFORMANT LUBETM, a high-performance lubricant.  
IMPORTANT: Never apply silicone spray or other  
substances to the walking belt or the walking plat-  
form. Such substances will deteriorate the walking  
belt and cause excessive wear.  
This product is for use on a nominal 120-volt circuit,  
and has a grounding plug that looks like the plug illus-  
trated in drawing 1 below. A temporary adapter that  
looks like the adapter illustrated in drawing 2 may be  
used to connect the surge suppressor to a 2-pole  
receptacle as shown in drawing 2 if a properly  
grounded outlet is not available.  
HOW TO PLUG IN THE POWER CORD  
DANGER:  
Improper connection  
of the equipment-grounding conductor can  
result in an increased risk of electric shock.  
Check with a qualified electrician or service-  
man if you are in doubt as to whether the  
product is properly grounded. Do not modify  
the plug provided with the product—if it will  
not fit the outlet, have a proper outlet  
1
Grounded Outlet Box  
Surge Suppressor  
Grounding Pin  
installed by a qualified electrician.  
Your treadmill, like any other type of sophisticated  
electronic equipment, can be seriously damaged by  
sudden voltage changes in your home’s power.  
Voltage surges, spikes, and noise interference can  
result from weather conditions or from other appli-  
ances being turned on or off. To decrease the pos-  
sibility of your treadmill being damaged, always  
use a surge suppressor with your treadmill (see  
drawing 1 at the right). To purchase a surge sup-  
pressor, see your local REEBOK dealer or call 1-  
800-806-3651 and order part number 146148.  
Grounding Pin  
Grounded Outlet  
Grounding Plug  
2
Grounded Outlet Box  
Adapter  
Surge Suppressor  
Use only a single-outlet surge suppressor that is  
UL 1449 listed as a transient voltage surge sup-  
pressor (TVSS). The surge suppressor must have a  
UL suppressed voltage rating of 400 volts or less  
and a minimum surge dissipation of 450 joules.  
The surge suppressor must be electrically rated  
for 120 volts AC and 15 amps. There must be a  
monitoring light on the surge suppressor to indi-  
cate whether it is functioning properly. Failure to  
use a properly functioning surge suppressor could  
result in damage to the control system of the  
treadmill. If the control system is damaged, the  
walking belt may change speed or stop unexpect-  
edly, which may result in a fall and serious injury.  
Lug  
Metal Screw  
The temporary adapter should be used only until a  
properly grounded outlet (drawing 1) can be installed  
by a qualified electrician.  
The green-colored rigid ear, lug, or the like extending  
from the adapter must be connected to a permanent  
ground such as a properly grounded outlet box cover.  
Whenever the adapter is used it must be held in place  
by a metal screw. Some 2-pole receptacle outlet box  
covers are not grounded. Contact a qualified elec-  
trician to determine if the outlet box cover is  
grounded before using an adapter.  
This product must be grounded. If it should malfunc-  
tion or break down, grounding provides a path of least  
resistance for electric current to reduce the risk of elec-  
tric shock. This product is equipped with a cord having  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
F
N
O
E
A
P
B
E
G
Q
C
R
K
J
L
H
H
D
E
I
Note: If there is a thin sheet of clear plastic  
on the face of the console, remove it.  
M
FEATURES OF THE CONSOLE  
The console also features new iFIT.com interactive  
technology. IFIT.com technology is like having a per-  
sonal trainer right in your home. Using the included  
audio cable, you can connect the treadmill to your home  
stereo, portable stereo, or computer and play special  
iFIT.com CD programs (CD’s are available separately).  
IFIT.com CD programs automatically control the speed  
and incline of the treadmill as a personal trainer guides  
you through every step of your workout. High-energy  
music provides added motivation. Each CD features two  
programs designed by certified personal trainers.  
The advanced console offers an impressive array of  
features to make your workouts more effective. When  
the console is in the manual mode, the speed and in-  
cline level of the treadmill can be changed with a touch  
of a button. As you exercise, the LED displays will pro-  
vide continuous exercise feedback.  
The console also offers thirteen preset workout  
programs—ten programs that automatically control the  
speed and incline of the treadmill as they guide you  
through effective fat-burning, aerobic, or performance  
workouts; two pulse programs that control the speed  
and the incline of the treadmill to keep your heart rate  
near target heart rate settings during your workouts; and  
a pulse-based fitness test program that estimates your  
relative fitness level.  
In addition, you can connect the treadmill to your VCR  
and TV and play iFIT.com video programs (videocas-  
settes are available separately). Video programs offer  
the same benefits as iFIT.com CD programs, but add  
the excitement of working out with a class and an  
instructor—the hottest new trend at health clubs.  
You can even create your own custom workout programs  
and store them in memory for future use.  
With the treadmill connected to your computer, you can  
basic programs, audio programs, and video programs  
directly from the internet. Additional options are soon to  
In addition, the console features a workout history  
mode that keeps track of the total hours you have exer-  
cised, the miles you have walked or run, the calories  
and fat calories you have burned, and your average  
speed. The console can display the totals for the  
previous 7 days or the totals since the workout history  
mode was last reset.  
To purchase iFIT.com CDs or videocassettes, call toll-  
free 1-800-735-0768.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DIAGRAM OF THE CONSOLE  
J. MODE Button—This button is used to select the  
manual mode, workout programs, and the iFIT.com  
mode.  
See the drawing on page 10.  
A. ENTER Button—This button is used to enter age,  
weight, and maximum heart rate settings.  
K. START Button—This button starts the walking belt.  
L. LEARN Button—This button is used to program  
speed and incline settings for custom programs.  
B. + and – Buttons—These buttons are used to change  
age, weight, and maximum heart rate settings.  
M. Key with Clip—The key turns the console on and off.  
The attached clip is designed to be worn on your  
waistband. If the key is pulled from the console, the  
power will automatically turn off.  
C. USER Button—This button is used to select user in-  
formation. Up to three different users can store age,  
weight, and maximum heart rate settings.  
D. QUICK SPEED Buttons—These buttons allow you  
to quickly select speed settings.  
N. INCLINE Buttons—These buttons control the incline  
of the treadmill. Each time a button is pressed, the  
incline will change by 0.5%. The incline range is 0%  
to 12%.  
E. LED Displays—These displays provide continuous  
feedback of the calories and fat calories you have  
burned, the elapsed time, the distance you have  
walked or run, the number of laps you have com-  
pleted, the speed of the walking belt, and your  
current pace. In addition, the PULSE display shows  
your heart rate when the heart rate monitor is worn.  
Note: The console can display speed and dis-  
tance in either miles or kilometers (see page 14).  
For simplicity, all instructions in this manual  
refer to miles.  
O. INCLINE Display—This display shows the incline  
level of the treadmill. Note: No indicators will light  
when the incline is at 0% or 0.5%; the first indicator  
will light when the incline is at 1% or 1.5%; the sec-  
ond indicator will light when the incline is at 2% or  
2.5%; the third indicator will light when the incline is  
at 3% or 3.5%, etc.  
P. 7-DAY Button—This button allows you to view the  
number hours you have exercised, the miles you  
have walked or run, the calories and fat calories  
you have burned, and your average speed for the  
previous 7 days (see THE WORKOUT HISTORY  
MODE on page 21).  
F. LED Matrix—When the manual mode is selected,  
the matrix will show your progress on an LED track.  
When a workout program is selected, the matrix will  
show the upcoming speed or target heart rate set-  
tings of the program.  
Q. TOTAL Button—This button allows you to view the  
total hours you have exercised, the miles you have  
walked or run, the calories and fat calories you  
have burned, and your average speed since the  
workout history mode was last reset.  
G. Manual/Program Indicators—These indicators show  
when the manual mode, a workout program, or the  
iFIT.com mode is selected.  
H. SPEED Buttons—These buttons control the speed  
of the walking belt. Each time a button is pressed,  
the speed will change by 0.1 mph; if a button is held  
down, the speed will change in increments of 0.5  
mph. The speed range is 0.5 mph to 12 mph.  
R. HISTORY RESET button—This button resets the  
workout history mode.  
I. STOP Button—This button stops the walking belt.  
When the button is pressed, the LED displays will  
pause and the TIME display will flash.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To use the manual mode, follow the steps beginning  
on page 13. To use a fat burn, aerobic, or perfor-  
mance program, see page 15. To use a pulse pro-  
gram, see page 16. To use the fitness test program,  
see page 17. To create and use a custom program,  
see pages 19 and 20. To use the workout history  
mode, see page 21. To use an iFIT.com CD or video  
program, refer to page 24. To use an iFit.com pro-  
gram directly from our Web site, see page 26.  
CAUTION:  
Before operating the  
console, read the following precautions.  
• Do not stand on the walking belt when turn-  
ing on the power or starting the walking belt.  
• Always wear the clip (see M on page 10) while  
operating the treadmill. If the key is pulled  
from the console, the walking belt will stop.  
• The treadmill is capable of high speeds;  
adjust the speed in small increments.  
HOW TO ENTER USER INFORMATION  
• The heart rate monitor is not a medical de-  
vice. Various factors may affect the accuracy  
of heart rate readings. The heart rate monitor  
is intended only as an exercise aid in deter-  
mining heart rate trends in general.  
Each time the power is turned  
on, the USER 1 indicator will  
begin to flash. The console  
allows up to three different  
users to enter their weight,  
their age, and a maximum  
heart rate setting into the console.  
• If you have heart problems, or if you are over  
60 years of age and have been inactive, do  
not use the three pulse-driven programs. If  
you are taking medication regularly, consult  
your physician to find whether the medica-  
tion will affect your exercise heart rate.  
If you enter your weight into the console, the CALS/  
FAT CALS display will be more accurate. If you want to  
use the fitness test program, you must enter your age.  
If you want to use pulse programs 1 or 2, you must  
enter your age and a maximum heart rate setting.  
• To reduce the risk of electric shock, keep the  
console dry. Avoid spilling liquid on the  
console and use only a sealable water bottle.  
If you want to enter your weight, your age, or a maxi-  
mum heart rate setting, follow the instructions below.  
Press the USER button.  
HOW TO TURN ON THE POWER  
1
Press the USER button  
to designate yourself as  
user 1. The USER 1  
indicator will remain lit  
without flashing. Note: To  
Make sure that the  
on/off switch, located  
on the front of the  
treadmill, is in the on  
position. Next, make  
designate yourself as  
On  
user 2 or user 3, press the USER button repeat-  
edly. IMPORTANT: Each time you use the tread-  
mill, make sure that the correct user is selected.  
sure that the power  
cord is properly  
plugged in (see  
page 9).  
Enter your weight if desired.  
2
Stand on the foot rails of the  
treadmill. Find the clip  
attached to the key (see M on  
page 10), and slide the clip  
onto the waistband of your  
clothes. Next, insert the key  
fully into the console. After a  
The current weight set-  
ting will be shown in the  
CALS/FAT CALS display.  
Press the + or – button to  
enter your weight. Each  
button press will change  
the weight setting by 1 pound; if a button is held  
down, the weight setting will change in increments  
of 5 pounds. When your weight is shown, press  
the ENTER button. Note: Once your weight is  
entered, it will be saved in memory, even when  
the power cord is unplugged.  
moment, various displays and indicators will light. Test  
the clip by carefully taking a few steps backward  
until the key is pulled from the console. If the key is  
not pulled from the console, adjust the position of  
the clip as needed. Then, re-insert the key fully into  
the console.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Enter your age if desired.  
HOW TO USE THE MANUAL MODE  
3
4
The current age setting  
will be shown in the  
PULSE display. Press  
the + or – button to enter  
your age. Each button  
press will change the age  
setting by 1 year; if a button is held down, the age  
setting will change in increments of 5 years. When  
your age is shown, press the ENTER button. Note:  
Once your age is entered, it will be saved in mem-  
ory, even when the power cord is unplugged.  
Insert the key fully into the console.  
1
See HOW TO TURN ON THE POWER on page 12.  
Select user 1, 2, or 3.  
2
When the key is inserted,  
user 1 will be selected,  
as shown by the USER 1  
indicator. If you have  
designated yourself as  
user 2 or 3, press the  
USER button repeatedly until the appropriate indi-  
cator lights.  
Enter a maximum heart rate setting if desired.  
The current  
maximum  
heart rate set-  
ting will be  
shown in the  
LED matrix.  
Enter your weight if desired.  
3
If you have not entered your weight, see HOW TO  
ENTER USER INFORMATION on page 12.  
When pulse  
programs 1 or  
2 are used,  
Select the manual mode.  
4
this is the highest level that your heart rate will  
reach during the program. This setting is a per-  
centage of your estimated maximum heart rate.  
(Your estimated maximum heart rate is 220 minus  
your age. For example, if you are 30 years old,  
your estimated maximum heart rate is 190.)  
When the key is inserted,  
the manual mode will be  
selected. If you have se-  
lected a workout pro-  
gram or the iFIT.com  
mode, you can select  
the manual mode again by pressing the MODE  
button repeatedly until the manual indicator lights.  
If desired, you can change the maximum heart  
rate setting by pressing the + and – buttons. Each  
button press will change the setting by 1%; if a  
button is held down, the setting will change in in-  
crements of 5%. The setting can be from 65% to  
85%. When the desired setting is shown, press the  
ENTER button. Note: When the key is removed  
from the console, the maximum heart rate setting  
will be reset to 65%.  
Press the START button or the SPEED + button  
to start the walking belt.  
5
A moment after the  
button is pressed, the  
walking belt will begin to  
move at 1.0 mph. Hold  
the handrails and begin  
walking. As you exer-  
cise, change the speed of the walking belt as de-  
sired by pressing the SPEED buttons or the  
QUICK SPEED buttons. CAUTION: Change the  
speed in small increments to avoid sudden  
jumps in speed.  
To stop the walking belt, press the STOP button.  
The displays will pause and the TIME display will  
begin to flash. To restart the walking belt, press  
the START button or the SPEED  
+
button.  
Note: When either of the SPEED buttons is pressed,  
the SPEED/PACE display will show the selected  
speed setting for seven seconds. The display will  
then show the actual speed of the walking belt.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: During the first few minutes that the treadmill  
is used, inspect the alignment of the walking belt  
and align it if necessary (see page 29).  
How to select miles per  
hour or kilometers per  
hour: Speed can be dis-  
played in either miles per  
Adjust the incline as desired.  
hour (mph) or kilometers  
per hour (kph). To change  
6
7
To vary the intensity of  
the unit of measurement, first hold down the STOP  
button while inserting the key into the console. The  
SPEED/PACE display will show either an “E” for  
English miles or an “M” for Metric kilometers. Press  
the SPEED + button to change the unit of measure-  
ment. Then, remove and reinsert the key.  
your workout, change the  
incline of the treadmill as  
desired by pressing the  
INCLINE buttons Note:  
After the INCLINE but-  
tons are pressed, it will  
take a moment for the  
treadmill to reach the selected incline setting.  
DISTANCE/LAPS  
display—This display  
shows the distance that  
the walking belt has  
moved and the number  
of laps you have com-  
Follow your progress with the LED track and  
the LED displays.  
pleted (one lap equals 1/4 mile). The display will  
alternate between one number and the other every  
seven seconds.  
The LED  
Track—The  
LED track rep-  
resents a dis-  
Note: If the speed is displayed in miles per hour,  
the distance will be displayed in miles; if the speed  
is displayed in kilometers per hour, the distance  
will be displayed in kilometers.  
tance of 1/4  
mile. As you  
exercise, the  
indicators  
around the  
TIME display—This  
display shows the total  
track will light one at a time until you have com-  
pleted 1/4 mile. A new lap will then begin.  
time that the walking belt  
has been moving. Note:  
CALS/FAT CALS  
When a workout pro-  
display—This display  
gram is selected, this  
shows the approximate  
display will show the time remaining in the program.  
numbers of calories and  
fat calories you have  
burned (see FAT BURN-  
ING on page 33). Every seven seconds, the display  
will change from one number to the other.  
When you are finished exercising, stop the  
walking belt and remove the key.  
8
Step onto the foot rails and press the STOP button.  
Next, change the incline of the treadmill to the  
lowest setting. The incline must be at the low-  
est setting when the treadmill is folded to the  
storage position or the treadmill will be dam-  
aged.  
PULSE display—This  
display shows your heart  
rate when the heart rate  
monitor is worn. (See  
page 7.)  
SPEED/PACE display—  
This display shows the  
speed of the walking belt  
Remove the key from the console and put it in a  
secure place. Finally, move the on/off switch to the  
off position and unplug the power cord.  
and your current pace  
(pace is measured in min-  
utes per mile). The dis-  
play will alternate between one number and the  
other every seven seconds. Note: When either of  
the SPEED buttons is pressed, the display will  
show the speed setting.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
matrix.) The  
speed settings  
for the next  
eighteen peri-  
ods will be  
shown in the  
eighteen  
CURRENT PERIOD  
HOW TO USE FAT BURN, AEROBIC, AND  
PERFORMANCE PROGRAMS  
The ten fat burn, aerobic, and performance programs  
automatically control the speed and incline of the tread-  
mill as they guide you through effective workouts de-  
signed to help you achieve specific exercise goals.  
columns to the  
right.  
Follow the steps below to use a fat burn, aerobic, or  
performance program.  
When only three seconds remain in the first period  
of the program, both the CURRENT PERIOD col-  
umn and the column to the right will flash, a series  
of tones will sound, and all speed settings will  
move one column to the left. The speed setting for  
the second period will then be shown in the flash-  
ing CURRENT PERIOD column and the treadmill  
will automatically adjust to the speed and incline  
settings for the second period.  
Insert the key fully into the console.  
1
See HOW TO TURN ON THE POWER on page  
12.  
Select user 1, 2, or 3.  
2
See step 2 on page 13.  
The program will continue in this way until the  
speed setting for the last period is shown in the  
CURRENT PERIOD column and the TIME display  
counts down to zero. The walking belt will then  
slow to a stop.  
Enter your weight if desired.  
3
If you have not entered your weight, see HOW TO  
ENTER USER INFORMATION on page 12.  
Select the desired program.  
Note: Each time a period ends and the speed set-  
tings move to the left, if all of the indicators in the  
CURRENT PERIOD column are lit, the speed set-  
tings may move downward so that only the highest  
indicators in the columns will appear in the LED  
matrix. When the speed settings move to the left  
again and not all of the indicators in the CURRENT  
PERIOD column are lit, the speed settings will  
move back up.  
4
When the key is inserted,  
the manual mode will be  
selected. To select a fat  
burn, aerobic, or perfor-  
mance program, press  
the MODE button  
repeatedly until one of the fat burn, aerobic, or  
performance indicators lights. The LED matrix will  
show the first eighteen speed settings of the  
program you have selected. The SPEED/PACE  
display will flash the program’s maximum speed  
setting and the INCLINE display will flash the pro-  
gram’s maximum incline setting for ten seconds.  
If the speed or incline setting for the current  
period is too high or too low, you can manually  
override the setting by pressing the SPEED or  
INCLINE buttons. Every few times one of the  
SPEED buttons is pressed, an additional indicator  
will light or darken in the CURRENT PERIOD col-  
umn. If any of the columns to the right of the  
CURRENT PERIOD column have the same num-  
ber of lit indicators as the CURRENT PERIOD col-  
umn, an additional indicator may light or darken in  
those columns as well. Note: If you manually ad-  
just the speed setting so that all of the indicators in  
the CURRENT PERIOD column are lit, the speed  
settings in the LED matrix will not move downward  
as described above. Note: If you manually over-  
ride the speed or incline setting for the current  
period, when the period ends the treadmill will  
automatically adjust to the speed and incline  
settings for the next period.  
Press the START button or the SPEED + button  
to start the program.  
5
A moment after the button is pressed, the treadmill  
will automatically adjust to the first speed and in-  
cline settings for the program. Hold the handrails  
and begin walking.  
Each program is divided into several time periods  
of different lengths. One speed setting and one in-  
cline setting are programmed for each period. The  
speed setting for the first period is shown in the  
flashing CURRENT PERIOD column of the LED  
matrix. (The incline settings are not shown in the  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To stop the program temporarily, press the STOP  
button. The TIME display will begin to flash. To  
restart the program, press the START button or the  
SPEED + button. To end the program, press the  
STOP button, remove the key, and then reinsert the  
key.  
gram can be started without a heart rate reading;  
however, the speed and/or incline of the treadmill  
will automatically decrease if your heart rate is not  
detected during the program.  
Select the desired program.  
5
6
Follow your progress with the LED displays.  
When the key is inserted,  
the manual mode will be  
selected. To select pulse  
program 1 or 2, press the  
MODE button repeatedly  
until the pulse program 1  
or 2 indicator lights. The first nineteen target heart  
rate settings of the program you have selected will  
appear in the LED matrix.  
6
7
See step 7 on page 14.  
When the program is completed, remove the  
key.  
Make sure that the incline of the treadmill is at  
the lowest setting. The incline must be at the  
lowest setting when the treadmill is folded to  
the storage position or the treadmill will be  
damaged. Next, remove the key from the console  
and put it in a secure place. In addition, move the  
on/off switch to the off position and unplug the  
power cord.  
Press the START button or the SPEED + button  
to start the program.  
A moment after the button is pressed, the treadmill  
will automatically adjust to the first speed and in-  
cline settings for the program. Hold the handrails  
and begin walking.  
HOW TO USE PULSE PROGRAMS 1 AND 2  
Pulse pro-  
grams 1 and 2  
CURRENT PERIOD  
consist of  
twenty-three,  
one-minute  
periods. One  
Pulse programs 1 and 2 automatically control the speed  
and incline of the treadmill to keep your heart rate within  
a predetermined range during your workouts.  
target heart  
rate setting is  
programmed  
Follow the instructions below to use pulse programs 1  
or 2.  
for each  
period. The  
Insert the key fully into the console.  
1
target heart rate setting for the first period will be  
shown in the flashing CURRENT PERIOD column  
of the LED matrix. The target heart rate settings for  
the next eighteen periods will be shown in the eigh-  
teen columns to the right.  
See HOW TO TURN ON THE POWER on page 12.  
Select user 1, 2, or 3.  
2
See step 2 on page 13.  
When only three seconds remain in the first period  
of the program, both the CURRENT PERIOD col-  
umn and the column to the right will flash and a  
series of tones will sound. All target heart rate  
settings will then move one column to the left. The  
target heart rate setting for the second period will  
then be shown in the CURRENT PERIOD column.  
Enter your weight, your age, and a maximum  
heart rate setting.  
3
If you enter your weight into the console, the  
CALS/FAT CALS display will be more accurate. To  
use pulse programs 1 or 2, you must enter your  
age and a maximum heart rate setting. If you  
have not entered this information, see HOW TO  
ENTER USER INFORMATION on page 12.  
As the program progresses, the speed and/or  
incline of the treadmill will change automatically to  
keep your heart rate near the heart rate setting  
shown in the CURRENT PERIOD column. The  
program will continue until the heart rate setting for  
the last period is shown in the CURRENT PERIOD  
column and the TIME display counts down to zero.  
The walking belt will then slow to a stop.  
Put on the heart rate monitor.  
4
The heart rate monitor must be worn when a pulse  
program is used. (See HOW TO USE THE HEART  
RATE MONITOR on page 7.) Note: A pulse pro-  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If your heart rate is not detected during the program,  
the letters “PLS” will flash in the PULSE display  
and the speed and/or incline of the treadmill will  
automatically decrease. (See HEART RATE  
MONITOR TROUBLE-SHOOTING on page 7.)  
HOW TO USE THE FITNESS TEST PROGRAM  
The fitness test program is designed to estimate the rel-  
ative fitness level you have achieved. For the best re-  
sults, the fitness test program should be used at a time  
when your energy level is high; the program should not  
be used if you have already exercised during the day.  
While the program is in progress, minor adjust-  
ments can be made to the speed or incline of the  
treadmill with the SPEED or INCLINE buttons.  
However, if you increase the speed, the incline will  
automatically decrease; if you decrease the speed,  
the incline will increase. If you increase the incline,  
the speed will decrease; if you decrease the incline,  
the speed will increase. The console will always  
attempt to keep your heart rate near the heart rate  
setting shown in the CURRENT PERIOD column.  
Note: When the incline reaches the lowest setting,  
the speed cannot be increased any further. When  
the incline reaches the highest setting, the speed  
cannot be decreased any further.  
The fitness test program consists of up to seven  
4-minute segments and is followed by a 2-minute cool-  
down period. The speed and/or incline of the treadmill  
will automatically increase at the beginning of each 4-  
minute segment. When your heart rate reaches 70% of  
your estimated maximum heart rate, the FITNESS  
TEST will end. After a 2-minute cool-down period, the  
console will display your estimated fitness level.  
To use the fitness test program, follow the steps below.  
Insert the key fully into the console.  
To stop the program, press the STOP button. Pulse  
programs should not be stopped temporarily and  
then restarted. To use the pulse program again, re-  
select the program and start it at the beginning.  
1
See HOW TO TURN ON THE POWER on page 12.  
Select user 1, 2, or 3.  
2
Follow your progress with the LED displays.  
See step 2 on page 13.  
7
8
See step 7 on page 14.  
Enter your age into the console.  
3
When the program is completed, remove the  
key.  
To use the fitness test program, you must  
enter your age. If you have not entered your age,  
see HOW TO ENTER USER INFORMATION on  
page 12.  
See step 7 on page 16.  
Put on the heart rate monitor.  
4
The heart rate monitor must be worn when the fit-  
ness test program is used. (See HOW TO USE  
THE HEART RATE MONITOR on page 7.) Note:  
The fitness test program can be started without a  
heart rate reading; however, the program will auto-  
matically stop if your heart rate is not detected 4  
minutes after the program is started.  
Select the fitness test program.  
5
When the key is inserted,  
the manual mode will be  
selected. To select the  
fitness test program,  
press the MODE button  
repeatedly until the “F”  
indicator lights. The first eighteen speed settings of  
the program will appear in the LED matrix.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
At the beginning of each four-minute segment, the  
speed and/or incline of the treadmill will automati-  
cally increase. The fitness test program will con-  
tinue in this way until your heart rate reaches 70%  
of your estimated maximum heart rate, and the  
current four-minute segment is completed. The fit-  
ness test program will then be completed, regard-  
less of how many segments remain.  
Press the START button or the SPEED + button  
to start the program.  
6
A moment after the but-  
ton is pressed, the in-  
cline of the treadmill will  
automatically adjust to  
3% and the walking belt  
will begin to move at 1.5  
When the fitness test pro-  
gram is completed, the  
letter “C” will appear in  
mph. The DISTANCE/LAPS display will show an  
“L 1” (level 1), indicating that the first 4-minute  
segment of the fitness test program has begun.  
Hold the handrails and begin walking.  
the DISTANCE/LAPS  
display and a two-minute  
cool-down period will  
The fitness test program is divided into seven,  
begin. The incline will then adjust to 1% and the  
speed will decrease.  
four-minute segments. Each segment consists of  
four, one-minute periods. One speed setting and  
one incline  
setting are  
When the cool-down pe-  
riod is completed, the  
programmed  
walking belt will slow to a  
for each pe-  
stop and your fitness  
riod. The  
level will be shown in the  
speed setting  
TIME display. There are  
for the first pe-  
ten fitness levels—fitness level 10 (FL:10) is the  
highest. Remember, the fitness test program is in-  
tended only to indicate your relative fitness level.  
riod will be  
shown in the  
flashing  
CURRENT PERIOD column of the LED matrix.  
(The incline settings are not shown in the matrix.)  
The speed settings for the next eighteen periods  
will be shown in the eighteen columns to the right.  
Note: The SPEED and INCLINE buttons will not  
function while the fitness test program is selected.  
If your pulse is not detected during the program,  
the letters “PLS” will flash in the PULSE display. If  
your pulse is not detected during the last thirty  
seconds of any four-minute segment (after four  
minutes, after eight minutes, etc.), the fitness test  
program will end and the TIME display will show a  
fitness level of 0 (FL: 0).  
When only three seconds remain in the first pe-  
riod of the program, both the CURRENT PERIOD  
column and the column to the right will flash, a  
tone will sound, and all speed settings will move  
one column to the left. The speed setting for the  
second period will then be shown in the flashing  
CURRENT PERIOD column.  
The fitness test program cannot be stopped tem-  
porarily and then restarted. However, the program  
can be stopped at any time by pressing the STOP  
button. The TIME display will then show an esti-  
mated fitness level.  
When the first four-minute segment of the pro-  
gram is completed, both the CURRENT PERIOD  
column and the column to the right will flash, a se-  
ries of tones will sound, and all speed settings will  
move one column to the left. The LED matrix will  
then show an “L 2,” indicating that the second 4-  
minute segment has begun. The incline will then  
adjust to 4% and the speed will increase to 2.5  
mph.  
When the program is completed, remove the  
key.  
7
See step 7 on page 16.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
programmed  
for each pe-  
riod. The  
HOW TO CREATE CUSTOM PROGRAMS  
CURRENT PERIOD  
speed setting  
for the first pe-  
riod is shown  
in the flashing  
CURRENT  
PERIOD col-  
umn of the  
LED matrix.  
Custom programs 1 and 2 are workout programs that  
you create. The programs control both the speed and  
incline of the treadmill, and can be up to 40 minutes  
long. The programs are stored in memory and can be  
changed as many times as desired.  
Follow the steps below to create a custom program.  
(The incline settings are not shown in the matrix.)  
To program speed and incline settings for the first  
period, simply adjust the speed and incline of the  
treadmill to the desired levels with the SPEED and  
INCLINE buttons. Every few times the SPEED but-  
tons are pressed, one additional indicator will light  
or darken in the CURRENT PERIOD column.  
Insert the key fully into the console.  
1
See HOW TO TURN ON THE POWER on page 12.  
Select user 1, 2, or 3.  
2
See step 2 on page 13.  
When the first period of the program is completed,  
three tones will sound and the current speed and in-  
cline settings will be stored in memory. All speed  
settings shown in the LED matrix will then move one  
column to the left and the speed setting for the sec-  
ond period will be shown in the flashing CURRENT  
PERIOD column. Program speed and incline set-  
tings for the second period as described above.  
Repeat this procedure until you have programmed  
speed and incline settings for as many periods as  
desired. Programs can have up to forty periods.  
Enter your weight if desired.  
3
If you have not entered your weight, see HOW TO  
ENTER USER INFORMATION on page 12.  
Select custom program 1 or 2.  
4
When the key is inserted,  
the manual mode will be  
selected. To select a cus-  
tom program, press the  
MODE button repeatedly  
until the custom 1 or 2 indi-  
cator lights.  
Note: To stop the program for a moment, press the  
STOP button. The displays will pause and the  
TIME display will begin to flash. To restart the pro-  
gram, press the START or SPEED  
+
button.  
Press the START button or the SPEED + button  
5
to start the program.  
Press the STOP button, remove the key, and  
then reinsert the key.  
7
8
A moment after the button is pressed, the walking  
belt will begin to move. Hold the handrails and  
begin walking.  
When you have programmed speed and incline  
settings for as many one-minute periods as  
desired, press the STOP button, remove the key,  
and then reinsert the key. The speed and incline  
settings that you have programmed and the length  
of the program will be stored in memory. To use the  
program again, see HOW TO USE CUSTOM PRO-  
GRAMS on page 20.  
Press the LEARN button and program the  
desired speed and incline settings.  
6
When the LEARN button is  
pressed, the LEARN indic-  
tor will light. Speed and in-  
cline settings can be pro-  
grammed only when the  
indicator is lit.  
When the program is completed, remove the  
key.  
See step 7 on page 16.  
Each program is divided into one-minute periods.  
One speed setting and one incline setting can be  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When only three seconds remain in the first period  
of the program, both the CURRENT PERIOD col-  
umn and the column to the right will flash and  
three tones will sound. All speed settings will then  
move one column to the left. The speed setting  
for the second period will then be shown in the  
CURRENT PERIOD column and the speed and  
incline of the treadmill will adjust to the second  
settings that you programmed previously.  
HOW TO USE CUSTOM PROGRAMS  
Insert the key fully into the console.  
1
See HOW TO TURN ON THE POWER on page  
12.  
Select user 1, 2, or 3.  
2
3
The program will continue in this way until the  
speed setting for the last period is shown in the  
CURRENT PERIOD column and the TIME display  
counts down to zero. The walking belt will then  
slow to a stop.  
See step 2 on page 13.  
Enter your weight if desired.  
If you have not entered your weight, see HOW TO  
ENTER USER INFORMATION on page 12.  
During the program, the speed and incline settings  
of the current period can be adjusted with the  
SPEED and INCLINE buttons. Adjustments will  
not be stored in memory. To reprogram speed  
and incline settings, press the LEARN button. The  
LEARN indicator will light. Speed and incline set-  
tings can be reprogrammed only when the in-  
dicator is lit. Next, adjust the speed and incline of  
the treadmill with the SPEED and INCLINE but-  
tons. When the current period of the program is  
completed, the new speed and incline settings will  
be stored in memory. When you have repro-  
grammed speed and incline settings for as many  
periods as desired, press the LEARN button  
again.  
Select custom program 1 or 2.  
4
When the key is in-  
serted, the manual  
mode will be selected.  
To select a custom pro-  
gram, press the MODE  
button repeatedly until  
the custom 1 or 2 indicator lights.  
Press the START button or the SPEED + but-  
ton to start the program.  
5
A moment after the button is pressed, the walking  
belt will begin to move. Hold the handrails and  
begin walking.  
To stop the program temporarily, press the STOP  
button. The TIME display will begin to flash. To  
restart the program, press the START button or  
the SPEED + button. To end the program, press  
the STOP button, remove the key, and then rein-  
sert the key.  
Each custom program is divided into one-minute  
periods. One speed setting and one incline setting  
are programmed for each period. The speed set-  
ting for the  
first period is  
shown in the  
Follow your progress with the LED displays.  
CURRENT PERIOD  
6
7
flashing CUR-  
RENT PE-  
RIOD column  
of the LED  
matrix. (The  
incline  
See step 7 on page 14.  
When the program is completed, remove the  
key.  
See step 7 on page 16.  
settings are  
not shown in  
the matrix.)  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
pressed, the TIME dis-  
play will show the total  
number of hours you  
THE WORKOUT HISTORY MODE  
have exercised. Note:  
The console features a workout history mode that  
keeps track of the total hours you have exercised, the  
miles you have walked or run, the calories and fat  
calories you have burned, and your average speed.  
The console can display the totals for the previous 7  
days or the totals since the workout history mode was  
last reset.  
The total will be rounded  
off to the nearest hour. If  
the total reaches 10,000 hours, the display will  
reset to zero.  
Press the 7-DAY button  
or the TOTAL button  
again. The SPEED/  
PACE display will show  
your average speed.  
Enter the current time into the console.  
1
If you have previously entered the current  
time, go to step 2.  
Press the 7-DAY button  
or the TOTAL button  
again. The DISTANCE/  
LAPS display will show  
the total number of miles  
For the workout history mode to be accurate, the  
current time must be entered into the console. To  
check the time setting, first hold down the STOP  
button while inserting the key into the console.  
The time setting will ap-  
pear in the TIME display.  
Note: The console uses  
a 24-hour clock; if the  
you have walked or run.  
Note: The total will be rounded off to the nearest  
mile. If the total reaches 1,000 hours, the display  
will reset to zero.  
current time is 6:45 pm,  
the display should show  
18:45.  
Press the 7-DAY button  
or the TOTAL button  
again. The CALS/  
FAT CALS display will  
show the total number of  
calories you have burned.  
Note: The total is shown in thousandths; if the dis-  
play shows 1.02, for example, you have burned  
1,020 calories. If the total reaches 10,000 calories,  
the display will reset to zero.  
To change the time set-  
ting, first press the  
LEARN button. The  
minute digits in the TIME  
display will begin to  
flash. Press the USER +  
or – button to set the  
minute digits to the cor-  
Press the 7-DAY button  
rect time. Press the LEARN button again. The  
hour digits will begin to flash. Press the + or – but-  
ton to enter the correct hour. Then, press the  
LEARN button again. When the correct time is  
shown, remove the key from the console and then  
reinsert it. Note: Once the current time is entered,  
it will be saved in memory, even when the power  
cord is unplugged.  
or the TOTAL button  
again. The CALS/  
FAT CALS display will  
show the total number of  
fat calories you have  
burned. Note: The total is shown in thousandths; if  
the display shows 1.02, for example, you have  
burned 1,020 fat calories. If the total reaches  
10,000 fat calories, the display will reset to zero.  
Select user 1, 2, or 3.  
2
Reset the workout history mode if desired.  
See step 2 on page 13.  
5
6
To reset the workout history mode, press the HIS-  
TORY RESET button. All displays will be reset to  
zero.  
If the walking belt is moving, press the STOP  
button.  
3
To access the workout history mode, the walking  
belt must be stopped.  
Exit the workout history mode.  
To exit the workout history mode, press any button  
on the console except the 7-DAY, TOTAL, or HIS-  
TORY RESET button.  
Press the 7-DAY button or the TOTAL button.  
4
When the 7-DAY button or the TOTAL button is  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO CONNECT YOUR PORTABLE STEREO  
HOW TO CONNECT THE TREADMILL TO YOUR  
CD PLAYER, VCR, OR COMPUTER  
Note: If your stereo has an RCA-type AUDIO OUT  
jack, see instruction A below. If your stereo has a  
3.5mm LINE OUT jack, see instruction B. If your  
stereo has only a PHONES jack, see instruction C.  
To use iFIT.com CD’s, the treadmill must be con-  
nected to your portable CD player, portable stereo,  
home stereo, or computer with CD player. See pages  
22 and 23 for connecting instructions. To use iFIT.com  
videocassettes, the treadmill must be connected to  
your VCR. See page 24 for connecting instructions. To  
use iFIT.com programs directly from our Web site,  
the treadmill must be connected to your home com-  
puter. See page 23 for connecting instructions.  
A. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the included adapter. Plug  
the adapter into an AUDIO OUT jack on your stereo.  
A
HOW TO CONNECT YOUR PORTABLE CD PLAYER  
AUDIO OUT  
RIGHT  
LEFT  
Note: If your CD player has separate LINE OUT and  
PHONES jacks, see instruction A below. If your CD  
player has only one jack, see instruction B.  
Audio  
Cable  
Adapter  
A. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the LINE OUT jack on  
your CD player. Plug your headphones into the  
PHONES jack.  
B. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the LINE OUT jack on  
your stereo.  
A
PHONES LINE OUT  
LINE OUT  
PHONES  
B
Head-  
phones  
Audio  
Cable  
LINE OUT  
Audio  
Cable  
B. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into a 3.5mm Y-adapter  
(available at electronics stores). Plug the Y-adapter  
into the PHONES jack on your CD player. Plug your  
headphones into the other side of the Y-adapter.  
C. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into a 3.5mm Y-adapter  
(available at electronics stores). Plug the Y-adapter  
into the PHONES jack on your stereo. Plug your  
headphones into the other side of the Y-adapter.  
B
PHONES  
C
PHONES  
3.5mm  
Y-adapter  
Audio  
Cable  
PHONES  
3.5mm  
Y-adapter  
Audio  
Cable  
Headphones  
Headphones  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO CONNECT YOUR HOME STEREO  
HOW TO CONNECT YOUR COMPUTER  
Note: If your stereo has an unused LINE OUT jack,  
see instruction A below. If the LINE OUT jack is  
being used, see instruction B.  
Note: If your computer has a 3.5mm LINE OUT jack,  
see instruction A. If your computer has only a  
PHONES jack, see instruction B.  
A. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the included adapter.  
Plug the adapter into the LINE OUT jack on your  
stereo.  
A. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the LINE OUT jack on  
your computer.  
A
A
CD  
LINE OUT  
VCR  
Amp  
LINE OUT  
Audio  
Cable  
LINE OUT  
Audio  
Cable  
Adapter  
B. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into a 3.5mm Y-adapter  
(available at electronics stores). Plug the Y-adapter  
into the PHONES jack on your computer. Plug your  
headphones or speakers into the other side of the  
Y-adapter.  
B. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the included adapter.  
Plug the adapter into an RCA Y-adapter (available  
at electronics stores). Next, remove the wire that is  
currently plugged into the LINE OUT jack on your  
stereo and plug the wire into the unused side of the  
RCA Y-adapter. Plug the RCA Y-adapter into the  
LINE OUT jack on your stereo.  
B
PHONES  
B
CD  
Audio  
Cable  
3.5mm  
Y-adapter  
VCR  
Amp  
LINE OUT  
Headphones/Speakers  
RCA  
Y-adapter  
Audio  
Adapter  
Cable  
Wire removed from  
LINE OUT jack  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO CONNECT YOUR VCR  
HOW TO USE IFIT.COM CD AND VIDEO  
PROGRAMS  
Note: If your VCR has an unused AUDIO OUT jack,  
see instruction A below. If the AUDIO OUT jack is  
being used, see instruction B. If you have a TV with  
a built-in VCR, see instruction B. If your VCR is  
connected to your home stereo, see HOW TO CON-  
NECT YOUR HOME STEREO on page 23.  
To use iFIT.com CD’s or videocassettes, the treadmill  
must be connected to your portable CD player, portable  
stereo, home stereo, computer with CD player, or VCR.  
See HOW TO CONNECT THE TREADMILL TO YOUR  
CD PLAYER, VCR, OR COMPUTER on page 22.  
Note: To purchase iFIT.com CD’s or videocas-  
settes, call toll-free 1-800-735-0768. Follow the steps  
below to use an iFIT.com CD or video program.  
A. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the included adapter.  
Plug the adapter into the AUDIO OUT jack on your  
VCR.  
Insert the key fully into the console.  
1
A
See HOW TO TURN ON THE POWER on page 12.  
ANT IN  
.
VIDEO AUDIO  
IN  
RF OUT  
CH  
3
4
OUT  
AUDIO OUT  
Select user 1, 2, or 3.  
2
RIGHT  
LEFT  
See step 2 on page 13.  
Audio  
Cable  
Adapter  
Select the iFIT.com mode.  
3
When the key is in-  
serted, the manual  
mode will be selected.  
To use an iFIT.com CD  
or video program, press  
the MODE button re-  
peatedly until the iFIT.com indicator lights. The let-  
ters “I FIT” and three indicators will appear in the  
LED matrix.  
B. Plug one end of the audio cable into the jack on the  
front of the treadmill near the power cord. Plug the  
other end of the cable into the included adapter.  
Plug the adapter into an RCA Y-adapter (available  
at electronics stores). Next, remove the wire that is  
currently plugged into the AUDIO OUT jack on your  
VCR and plug the wire into the unused side of the Y-  
adapter. Plug the Y-adapter into the AUDIO OUT  
jack on your VCR.  
Insert the iFIT.com CD or videocassette.  
4
If you are using an iFIT.com CD, insert the CD into  
your CD player. If you are using an iFIT.com video-  
cassette, insert the videocassette into your VCR.  
B
ANT IN  
.
VIDEO AUDIO  
IN  
RF OUT  
CH  
3
4
OUT  
Press the PLAY button on your CD player or  
VCR.  
5
A moment after the button is pressed, your personal  
trainer will begin guiding you through your workout.  
Simply follow your personal trainer’s instructions.  
Note: If the TIME display is flashing, press the  
START button or the SPEED + button on the con-  
sole. The treadmill will not respond to a CD or video  
program when the TIME display is flashing.  
RCA Y-adapter  
Adapter  
Audio  
Cable  
Wire removed from  
AUDIO OUT jack  
During the CD or video program, an electronic  
“chirping” sound will alert you when the speed  
and/or incline of the treadmill is about to change.  
CAUTION: Always listen for the “chirp” and be  
prepared for speed and/or incline changes. In  
some instances, the speed and/or incline may  
change before the personal trainer describes  
the change.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If the speed or incline settings are too high or too  
low, you can manually override the settings at any  
time by pressing the SPEED or INCLINE buttons  
on the console. However, when the next “chirp”  
is heard, the speed and/or incline will change  
to the next settings of the CD or video program.  
• Adjust the volume of your CD player or VCR.  
If the volume is too high or too low, the con-  
sole may not detect the program signals.  
• Make sure that the audio cable is properly  
connected, that it is fully plugged in, and that  
it is not wrapped around a power cord.  
To stop the walking belt at any time, press the  
STOP button on the console. The TIME display  
will begin to flash. To restart the program, press  
the START button or the SPEED + button. After a  
moment, the walking belt will begin to move at 1.0  
mph. When the next “chirp” is heard, the  
speed and incline will change to the next set-  
tings of the CD or video program.  
• If you are using your portable CD player and  
the CD skips, set the CD player on the floor or  
another flat surface instead of on the console.  
Follow your progress with the LED displays.  
6
7
See step 7 on page 14.  
When the program is completed, remove the  
key.  
When the CD or video program is completed, the  
walking belt will stop and the TIME display will  
begin to flash. Note: To use another CD or video  
program, press the STOP button or remove the  
key and go to step 1 on page 24.  
See step 7 on page 16.  
CAUTION: Always remove iFIT.com CD’s and  
videocassettes from your CD player or VCR  
when you are finished using them.  
Note: If the speed or incline of the treadmill  
does not change when a “chirp” is heard:  
• Make sure that the iFIT.com indicator is lit and  
that the TIME display is not flashing. If the  
TIME display is flashing, press the START  
button or the SPEED + button on the console.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Follow the on-line instructions to start the  
program.  
HOW TO USE PROGRAMS DIRECTLY FROM  
OUR WEB SITE  
7
8
When you start the program, an on-screen count-  
down will begin.  
basic programs, audio programs, and video programs  
directly from the internet. Additional options are soon  
Return to the treadmill and stand on the foot  
rails. Find the clip attached to the key and slide  
the clip onto the waistband of your clothing.  
To use programs from our Web site, the treadmill must  
be connected to your home computer. See HOW TO  
CONNECT YOUR COMPUTER on page 23. In  
addition, you must have an internet connection and  
an internet service provider. A list of specific system  
requirements will be found on our Web site.  
When the on-screen countdown ends, the program  
will begin and the walking belt will begin to move.  
Hold the handrails, step onto the walking belt, and  
begin walking. During the program, an electronic  
“chirping” sound will alert you when the speed  
and/or incline of the treadmill is about to change.  
CAUTION: Always listen for the “chirp” and be  
prepared for speed and/or incline changes.  
Follow the steps below to use a program from our  
Web site.  
If the speed or incline settings are too high or too  
low, you can manually override the settings at any  
time by pressing the SPEED or INCLINE buttons  
on the console. However, when the next “chirp”  
is heard, the speed and/or incline will change  
to the next settings of the program.  
Insert the key fully into the console.  
1
See HOW TO TURN ON THE POWER on page 12.  
Select user 1, 2, or 3.  
2
See step 2 on page 13.  
To stop the walking belt at any time, press the  
STOP button on the console. The TIME display  
will begin to flash. To restart the program, press  
the START button or the SPEED + button. After a  
moment, the walking belt will begin to move at 1.0  
mph. When the next “chirp” is heard, the  
speed and incline will change to the next set-  
tings of the program.  
Select the iFIT.com mode.  
3
When the key is in-  
serted, the manual  
mode will be selected.  
To use an iFIT.com CD  
or video program, press  
the MODE button re-  
When the program is completed, the walking belt  
will stop and the TIME display will begin to flash.  
Note: To use another program, press the STOP  
button and go to step 5.  
peatedly until the iFIT.com indicator lights. The  
letters “I FIT” and three indicators will appear in  
the LED matrix.  
Go to your computer and start an internet  
connection.  
Note: If the speed or incline of the treadmill  
does not change when a “chirp” is heard, make  
sure that the iFIT.com indicator is lit and that  
the TIME display is not flashing. In addition,  
make sure that the audio cable is properly con-  
nected, that it is fully plugged in, and that it is  
not wrapped around a power cord.  
4
Start your web browser, if necessary, and go to  
5
Follow the desired links on our Web site to se-  
lect a program.  
6
Follow your progress with the LED displays.  
9
Read and follow the on-line instructions for using a  
program.  
See step 7 on page 14.  
When the program is completed, remove the  
key.  
10  
See step 7 on page 16.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO FOLD AND MOVE THE TREADMILL  
HOW TO FOLD THE TREADMILL FOR STORAGE  
1
Before folding the treadmill, adjust the incline to the  
lowest position. If this is not done, the treadmill may be  
permanently damaged. Next, unplug the power cord.  
CAUTION: You must be able to safely lift 45 pounds (20  
kg) in order to raise, lower, or move the treadmill.  
1. Hold the treadmill with your hands in the locations shown  
at the right. CAUTION: To decrease the possibility of in-  
jury, bend your legs and keep your back straight. As  
you raise the treadmill, make sure to lift with your legs  
rather than your back. Raise the treadmill about halfway  
to the vertical position.  
2. Move your right hand to the position shown and hold the  
2
treadmill firmly. Hold the lock knob with your left hand  
and pull it to the side. Raise the treadmill until the lock  
knob is aligned with the catch. Slowly release the lock  
knob. Make sure that the pin on the lock knob is in-  
side of the catch.  
Pin  
To protect the floor or carpet from damage, place a  
mat under the treadmill. Keep the treadmill out of  
direct sunlight. Do not leave the treadmill in the stor-  
age position in temperatures above 85° Fahrenheit.  
Lock  
Knob  
Catch  
HOW TO MOVE THE TREADMILL  
Before moving the treadmill, convert the treadmill to the stor-  
age position as described above. Make sure that the pin  
on the lock knob is inside of the catch.  
Book Holder  
1. Hold the handrails as shown and place one foot against  
the hood only in the location shown. Do not hold or  
push on the book holder or it may be damaged.  
2. Tilt the treadmill back until it rolls freely on the front  
wheels. Carefully move the treadmill to the desired loca-  
tion. Never move the treadmill without tipping it back.  
To reduce the risk of injury, use extreme caution  
while moving the treadmill. Do not move the treadmill  
over an uneven surface.  
Base  
3. Place one foot on the base and carefully lower the tread-  
mill until it is resting on the base.  
Front Wheels  
HOW TO LOWER THE TREADMILL FOR USE  
1. See drawing 2 above. Hold the upper end of the treadmill with your right hand as shown. Using your left hand,  
pull the lock knob to the left and hold it. Pivot the treadmill down until the frame is past the pin on the lock knob.  
Note: You may need to push the handrail to the side slightly.  
2. See drawing 1 above. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. Do not drop  
the treadmill CAUTION: To decrease the possibility of injury, bend your legs and keep your back  
straight.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and  
follow the steps listed. If further assistance is needed, please call our Customer Service Department toll-  
free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).  
PROBLEM: The power does not turn on  
SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor  
is plugged into a properly grounded outlet (see page 9). Use only a single-outlet surge suppressor  
that meets all of the specifications described on page 9. Important: The treadmill is not compatible  
with GFCI-equipped outlets.  
b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.  
c. Check the circuit breaker located on the treadmill  
c
near the power cord. If the switch protrudes as  
shown, the circuit breaker has tripped. To reset the  
circuit breaker, wait for five minutes and then press  
the switch back in.  
Tripped  
Reset  
d. Check the on/off switch located on the treadmill  
near the power cord. The switch must be in the on  
position.  
d
On  
Position  
PROBLEM: The power turns off during use  
SOLUTION: a. Check the circuit breaker located on the treadmill near the power cord (see c. above). If the circuit  
breaker has tripped, wait for five minutes and then press the switch back in.  
b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for  
five minutes, and then plug it back in.  
c. Remove the key from the console. Reinsert the key fully into the console.  
d. Make sure that the on/off switch is in the on position (see d. above).  
e. If the treadmill still will not run, please call our Customer Service Department, toll-free.  
PROBLEM: The walking belt slows when walked on  
SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 9.  
b. If the walking belt is overtightened, treadmill perfor-  
b
mance may decrease and the walking belt may be-  
come damaged. Remove the key and UNPLUG THE  
POWER CORD. Using the allen wrench, turn both  
rear roller adjustment bolts counterclockwise 1/4 of a  
turn. When the walking belt is properly tightened, you  
should be able to lift each side of the walking belt 3 to  
4 inches off the walking platform. Be careful to keep  
the walking belt centered. Plug in the power cord, in-  
sert the key, and run the treadmill for a few minutes.  
Repeat until the walking belt is properly tightened.  
3”–4”  
Rear Roller Bolts  
c. If the walking belt still slows when walked on, please call our Customer Service Department, toll-  
free.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROBLEM: The walking belt is off-center or slips when walked on  
SOLUTION: a. If the walking belt is off-center, first remove the key  
and UNPLUG THE POWER CORD. If the walking  
belt has shifted to the left, use the allen wrench to  
turn the left rear roller bolt clockwise 1/2 of a turn; if  
the walking belt has shifted to the right, turn the  
bolt counterclockwise 1/2 of a turn. Be careful not to  
overtighten the walking belt. Plug in the power cord,  
insert the key and run the treadmill for a few minutes.  
Repeat until the walking belt is centered.  
a
b. If the walking belt slips when walked on, first remove  
the key and UNPLUG THE POWER CORD. Using  
the allen wrench, turn both rear roller bolts clockwise,  
1/4 of a turn. When the walking belt is correctly tight-  
ened, you should be able to lift each side of the walk-  
ing belt 3 to 4 inches off the walking platform. Be  
careful to keep the walking belt centered. Plug in the  
power cord, insert the key and carefully walk on the  
treadmill for a few minutes. Repeat until the walking  
belt is properly tightened.  
b
PROBLEM: The Speed/Minutes-Mile display on the console does not function properly  
SOLUTION: a. Remove the key from the console and unplug the  
a
power cord. Remove the screws from the hood and  
carefully remove the hood. Locate the Reed Switch  
(17) and the Magnet (12) on the left side of the Pulley  
(11). Turn the Pulley until the Magnet is aligned with  
1/8”  
11  
12  
26  
the Reed Switch. Make sure that the gap between  
the Magnet and the Reed Switch is about 1/8”. If  
necessary, loosen the Reed Switch Screw (26) and  
move the Reed Switch slightly. Retighten the Screw.  
Re-attach the hood and run the treadmill for a few  
minutes to check for a correct speed reading.  
17  
Top  
View  
PROBLEM: The heart rate monitor does not function properly  
b
SOLUTION: a. If the heart rate monitor does not function properly, refer to HEART  
RATE MONITOR TROUBLE-SHOOTING on page 7.  
b. If the heart rate monitor still does not function properly, the battery  
should be changed. To replace the battery, locate the battery cover  
on the back of the sensor unit. Insert a coin into the slot in the cover  
and turn the cover counterclockwise to the “open” position. Remove  
the cover.  
Next, remove the old battery from the sensor unit. Insert a new CR  
2032 battery, making sure that the writing is on top. In addition, make  
sure that the rubber gasket is in place in the sensor unit. Replace the  
battery cover and turn it to the closed position.  
CR2032  
Battery  
Rubber  
Gasket  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROBLEM: The displays and indicators on the console remain lit after the key is removed  
SOLUTION: a. Hold down the STOP button while inserting the key into the console.  
a
Make sure that there is not a letter “d” in the CALS/FAT CALS  
display. If a “d” appears in the display, the console is in the “demo”  
mode. This mode is intended to be used only when a treadmill is dis-  
played in a store. When the console is in the demo mode, the power  
cord can be plugged in, the key can be removed from the console,  
and the displays and indicators on the console will automatically light  
in a preset sequence, although the buttons on the console will not operate. If a “d” appears in the  
CALS/FAT CALS display, press the SPEED – button so the display is blank. Then, remove  
the key from the console.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REEBOK UNIVERSITY  
Reebok University was launched in 1993 to fulfill a  
vision to establish a “university without walls” that  
develops quality, researched, state-of-the-art fitness  
programming for the fitness industry throughout the  
world.  
WALKING AND REDUCED RISK FOR CARDIOVAS-  
CULAR DISEASE  
Several studies have found that regular walking at any  
speed can increase HDL-C cholesterol (a high-density  
lipoprotein which removes excess cholesterol from the  
body) and can lower concentrations of blood triglyc-  
erides (a storage form of fat), thus reducing the risk for  
Working with the world’s best professionals, Reebok  
University has created a host of original programs,  
such as Step Reebok®, Walk ReebokSM, Slide ReebokSM cardiovascular disease.  
and Reebok City JamSM. The industry has adopted  
Reebok programming as the “gold” standard. Our  
guidelines and terminology are used by fitness profes-  
sionals and participants around the world, and our  
exceptional programming has been approved in the  
United States by AFAA and ACE for continuing educa-  
tion credits.  
Duncan and his colleagues3 concluded that exercise  
does not have to be vigorous to reduce cardiovascular  
risk factors. In other words, people who choose to  
stroll rather than walk briskly can reduce their risk for  
cardiovascular disease.  
After studying the physical activity patterns of 17,000  
Harvard alumni over a 20-year period, Paffenbarger  
and his colleagues4 concluded that walking as little as  
five city blocks per day can reduce the risk of cardio-  
vascular disease, and walking 2 miles per day can  
reduce the risk of a heart attack by 28% or more.  
Therefore, while walking at a fast pace will improve  
aerobic fitness, walking at any speed (slow or fast) can  
reduce a person's risk for heart disease.  
WALKING AND CARDIORESPIRATORY  
ENDURANCE  
Scientific studies confirm that  
walking at a moderate to brisk  
pace can enhance aero-  
bic fitness. Rippe and  
his colleagues1 found  
that of 500 subjects  
tested, 67% of the men  
and 90% of the women  
were able to reach their  
target heart rates by  
walking 4 to 4.5 miles  
per hour.  
WALKING AND WEIGHT REDUCTION  
Walking is an excellent activity for burning calories.  
The steeper the incline and/or the faster the speed, the  
more calories are burned. For example, a 150-pound  
person walking at 3.5 miles per hour on flat ground will  
burn about 300 calories per hour. This same person  
will burn 400 calories per hour on a gentle 4% incline  
and 500 calories per hour on a steeper 10% incline. If  
this person speeds the pace up to 4 miles per hour on  
level ground, 350 calories will be burned in one hour.5  
Pollock and his colleagues2 found that middle-aged  
men who walked at a pace of 3.5 to 4.5 miles per hour  
for 40 minutes four times per week had the same car-  
diovascular improvements as men the same age who  
jogged for 30 minutes three times per week. Although  
the intensity of exercise was lower for the walkers than  
the runners, the increased duration and frequency of  
walking provided the walkers with similar aerobic ben-  
efits as the runners.  
It should be noted that participants who do not wish to  
walk at faster speeds can burn a comparable number  
of calories by walking for longer periods of time.  
WALKING AND BONE DENSITY  
Osteoporosis is a major health problem in the United  
States, affecting an estimated 15 to 30 million people.  
An age-related disorder, osteoporosis reduces the  
density of bones. This disease can be life-threatening  
since many older people die as a result of complica-  
tions suffered from broken bones. Adequate calcium in  
the diet and weight-bearing exercises seem to reduce  
the risk of osteoporosis.  
On the basis of current research, it seems clear that  
walking at a moderate to brisk pace can be an excel-  
lent aerobic activity.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Several studies have reported that regular walking at  
moderate to brisk speeds appears to increase bone  
density. Specifically, Fradin and his colleagues6 found  
that 70-year-old subjects who walked at least 30 min-  
utes per day had higher bone mineral content than  
subjects who walked less than 30 minutes per day.  
Jones and his colleagues7 reported that sedentary  
women (aged 30 to 61 years old) who began a regular  
walking program and continued for one year increased  
their bone density.  
During a 24-week study, not one of 59 participants  
who walked five days a week at speeds between 3 and  
5 miles per hour sustained a walking-related injury that  
necessitated consulting with a physician. Carroll and  
his colleagues10 reported that 14% of the elderly sub-  
jects participating in a walking study suffered training-  
related orthopedic injuries, mostly to the lower leg and  
foot. The majority of injuries occurred in the group as-  
signed to "fast walking."  
It is important to note that all forms of exercise have  
some degree of risk associated with the activity.  
Generally, the less mechanical stress on the muscu-  
loskeletal system, the less risk of becoming injured.  
Because of the low-impact nature of walking, the inci-  
dence of injury appears to be low when compared to  
other high-impact activities.  
Since walking can be comfortably performed by people  
of any age, walking appears to be practical and effec-  
tive in reducing a person's risk for developing osteo-  
porosis.  
WALKING AND STRESS REDUCTION  
There are many stressors in today's society, including  
economic concerns, work-related pressures and the  
need to balance career goals with home responsibili-  
ties. People who are unable to cope with these types  
of stressors are often tense and anxious, and may  
even become physically or psychologically ill.  
REFERENCES  
1. Rippe, J., Ross, J., et. al. “Cardiovascular effects of walking.”  
(Abstract), Proceedings of the Second International Conference  
on Physical Activity, Aging and Sports, July, 1985, p. 47.  
2. Pollock, M., Miller, H. Jr., et. al. “Effects of walking on body com-  
position and cardiovascular function of middle-aged men.”  
Journal of Applied Physiology, 1971, 30:126–130.  
3. Duncan, J., Gordon, N., et. al. “Women walking for health and fit-  
ness. How much is enough?” Journal of the American Medical  
Association, 1991, 266(23):3295–9.  
4. Paffenbarger, R., Hyde, R., et.al. “Physical activity, all-cause  
mortality and longevity of college alumni.” New England Journal  
of Medicine, 1986, 314:605–613.  
Researchers have found that exercise is one way to  
help people reduce stress. For example, subjects who  
engaged in a regular aerobic conditioning program and  
who altered their diets experienced significant gains in  
self-concept, feelings of well-being and reduced  
depression.8  
5. “Better walking workouts.” University of California at Berkeley  
Wellness Letter, 1992, 8(12):4–5.  
6. Fradin, K. Grimby, G., et. al. “Walking habits and health-related  
factors in a 70-year-old population,” Gerontology, 1991,  
37(5):281–8.  
7. Jones, P., Hardman, A., et. al. “Influence of brisk walking on the  
broadband ultrasonic attenuation of the calcaneus in previously  
sedentary women aged 30–61 years.” Calcified Tissue  
International, 1991, 49(2):112–5.  
Cramer and his colleagues9 specifically examined the  
effect of brisk walking on mildly obese sedentary  
women and found that walking improved general psy-  
chological well-being. Walking therefore appears to be  
an effective tool for improving psychological well-being.  
8. Blair, S., Collingwood, T., et. al. “Health Promotion for Educators:  
Impact on Health Behaviors, Satisfaction, and General Well-  
Being,” American Journal of Public Health, 1984, 74:147–49.  
9. Cramer, S., Nieman D., et. al. “The effects of moderate exercise  
training on psychological well-being and mood state in women.”  
Journal of Psychosomatic Research, 1991, 35(4–5):437–49.  
10. Carroll, J., Pollack, M., et. al. “Incidence of injury during moder-  
ate and high intensity walking in the elderly.” Journal of  
Gerontology, 1992, 47(3):M61–6.  
WALKING AND INJURIES  
Walking is often associated with a low injury rate.  
Walking is considered to be a "low impact" activity be-  
cause one foot remains in contact with the ground at  
all times. Walking at speeds of 3 miles per hour pro-  
duces vertical impact forces that are around 1.25 times  
body weight, whereas running at 7 miles per hour in-  
creases vertical impact forces to more than 2.5 times  
body weight.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXERCISE GUIDELINES  
During the first few minutes of exercise, your body  
uses easily accessible carbohydrate calories for en-  
ergy. Only after the first few minutes does your body  
begin to use stored fat calories for energy. If your goal  
is to burn fat, adjust the speed or incline of the tread-  
mill until your heart rate is near the lowest number in  
your training zone.  
WARNING:  
Before beginning this  
or any exercise program, consult your physi-  
cian. This is especially important for individu-  
als over the age of 35 or individuals with pre-  
existing health problems.  
The heart rate monitor is not a medical de-  
vice. Various factors, including the user's  
movement, may affect the accuracy of heart  
rate readings. The heart rate monitor is in-  
tended only as an exercise aid in determining  
heart rate trends in general.  
For maximum fat burning, adjust the speed or incline  
of the treadmill until your heart rate is near the middle  
number in your training zone.  
Aerobic Exercise  
If your goal is to strengthen your cardiovascular sys-  
tem, your exercise must be “aerobic.” Aerobic exercise  
is activity that requires large amounts of oxygen for pro-  
longed periods of time. This increases the demand on  
the heart to pump blood to the muscles and on the  
lungs to oxygenate the blood. For aerobic exercise, ad-  
just the speed or incline of the treadmill until your heart  
rate is near the highest number in your training zone.  
The following guidelines will help you to plan your ex-  
ercise program. For more detailed exercise informa-  
tion, obtain a reputable book or consult your physician.  
EXERCISE INTENSITY  
Whether your goal is to burn fat or to strengthen your  
cardiovascular system, the key to achieving the  
WORKOUT GUIDELINES  
desired results is to exercise with the proper intensity.  
The proper intensity level can be found by using your  
heart rate as a guide. The chart below shows recom-  
mended heart rates for fat burning and aerobic exercise.  
Each workout should include the following three parts:  
A Warm-up—Start each workout with 5 to 10 minutes  
of stretching and light exercise. A proper warm-up in-  
creases your body temperature, heart rate and circula-  
tion in preparation for exercise.  
Training Zone Exercise—After warming up, increase  
the intensity of your exercise until your heart rate is in  
your training zone for 20 to 60 minutes. (During the  
first few weeks of your exercise program, do not keep  
your heart rate in your training zone for longer than 20  
minutes.) Breathe regularly and deeply as you exer-  
cise—never hold your breath.  
To find the proper heart rate for you, first find your age  
near the bottom of the chart (ages are rounded off to  
the nearest ten years). Next, find the three numbers  
above your age. The three numbers define your “train-  
ing zone.” The lower two numbers are recommended  
heart rates for fat burning; the higher number is the  
recommended heart rate for aerobic exercise.  
A Cool-down—Finish each workout with 5 to 10 min-  
utes of stretching to cool down. This will increase the  
flexibility of your muscles and will help prevent post-ex-  
ercise problems.  
You can measure your heart rate using the heart rate  
monitor. If your heart rate is too high or too low, adjust  
the speed or incline of the treadmill accordingly.  
EXERCISE FREQUENCY  
To maintain or improve your condition, complete three  
workouts each week, with at least one day of rest  
between workouts. After a few months, you may  
complete up to five workouts each week if desired.  
Fat Burning  
To burn fat effectively, you must exercise at a relatively  
low intensity level for a sustained period of time.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART LIST—MODEL NO. RBTL17910  
R0502A  
To locate the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual.  
Key No. Qty.  
Description  
Key No. Qty.  
Description  
1
2
3
4
5
6
7
8
1
1
1
2
1
1
2
1
2
4
1
1
9
2
2
1
1
1
4
1
20  
1
1
1
1
8
4
1
1
3
1
2
1
4
1
1
1
1
1
6
1
2
23  
13  
1
1
1
2
4
4
Left Foot Rail  
Right Foot Rail  
Audio Wire  
Front Isolator  
Latch Catch  
Platform  
Walking Platform Screw  
Walking Belt  
Frame Pivot Bolt  
Frame Pivot Washer  
Front Wheel/Pulley  
Magnet  
Front Roller Nut/Front Wheel Nut  
Spacer Insert  
Frame Pivot Spacer  
Reed Switch Clip  
Reed Switch  
51  
52  
53  
54  
55  
56  
57  
58  
59*  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
79  
80  
81  
82  
83  
84  
85  
86  
87  
88  
89  
90  
91  
92  
93  
94  
95  
96  
97  
98  
99  
100  
1
4
2
1
1
1
2
1
1
1
1
1
1
1
1
25  
1
1
1
1
1
1
3
4
8
2
2
2
1
1
1
1
2
4
1
1
2
2
1
1
1
1
2
1
2
1
5
2
2
1
Heart Rate Strap  
Roller Adj. Washer  
Rear Roller Adjustment Bolt  
Rear Endcap  
Frame  
Allen Wrench  
Rear Platform Screw  
Rear Roller  
Idler Assembly  
Audio Wire Nut  
Tension Washer  
Foam Grip (left)  
Idler Arm  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
Idler Spring  
Upright  
Console Screw  
Lock Knob  
Lock Knob Sleeve  
Lock Knob Spring  
Lock Pin Collar  
Pin Clip  
Lift Frame  
Clips  
Pulse Receiver Wire  
Foot Rail Screw  
Motor Belt  
Pulse Receiver  
Motor  
Reading Rack  
Screw  
Hood Bracket  
Ground Wire  
Motor Tension Washer  
Lift Motor Nut/Pivot Nut  
Lift Motor Bolt  
Motor Bolt  
Outlet Bracket  
Plastic Stand-off  
Power Supply  
Power Supply Bracket  
Controller  
Controller Bracket  
Motor Hood  
Hood Screw  
Motor Belly Pan  
Belt Guide  
Screw  
Plastic Fastener  
Frame Belly Pan  
12” Audio Wire  
Ground Screw  
Rear Foot  
Lock Pin  
Incline Pivot Bolt/Tension Bolt  
Metal Motor Washer  
Console Screw (long)  
Wheel Spacer  
Front Wheel  
Wheel Bolt  
Pulley Nut  
Console Base (Top)  
Console  
Key/Clip  
Right Pad  
Belly Pan Screw  
Upright Wire Harness  
Shock  
Upright Endcap  
Left Pad  
Filter Wire  
Latch Warning Decal  
Incline Motor  
Motor Controller Wire  
Incline Motor Spacer  
Tie Holder Screw  
Tie Holder  
Tie  
8” Cable Tie  
Bumper  
Bumper Screw  
On/Off Switch  
Isolator Washer  
Isolator Nut  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Key No. Qty.  
Description  
Key No. Qty.  
Description  
101  
102  
103  
104  
105  
106  
107  
108  
109  
110  
111  
112  
113  
114  
115  
116  
117  
118*  
119  
120  
1
1
1
2
1
1
1
4
1
1
1
2
2
1
1
1
1
1
2
1
Circuit Breaker  
Power Cord  
Power Cord Grommet  
Warning Decal  
Heart Rate Sensor  
Jack  
iFIT.com Audio Cable  
Rear Foot Screw  
Pulley Washer  
Idler Pulley  
Pulley Spacer  
Outlet Bracket Star Washer  
Static Decal  
Audio Wire Nut  
Idler Pulley Bolt  
Foam Grip (right)  
Console Base (bottom)  
Latch Assembly  
Roller Star Washer  
Filter Wire  
121  
122  
123  
124  
125  
126  
127  
128  
129  
130  
131  
#
2
2
2
2
2
4
1
1
2
2
1
1
1
1
1
1
1
Motor Isolator  
Ball Detent  
Adjustable Cushion  
Cushion Spacer  
Cushion Bolt  
Controller Screw  
Motor Isolator Plate  
Incline Motor Bolt (Bottom)  
Rear Endcap Screw  
Base Endcap Screw  
Idler Arm Nylon Washer  
14” White Wire, 2 F  
8” Blue Wire, 2 F  
8” Blue Wire, 2 F  
4” Black Wire, 2 F  
12” Green Wire, F/Ring  
User’s Manual  
#
#
#
#
#
* Includes all parts shown in the box  
# These parts are not illustrated  
HOW TO ORDER REPLACEMENT PARTS  
To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through  
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to give  
the following information:  
• The MODEL NUMBER of the product (RBTL17910)  
• The NAME of the product (REEBOK® V 4000 treadmill)  
• The SERIAL NUMBER of the product (see the front cover of this manual)  
• The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 34 and this page and the  
EXPLODED DRAWING attached in the center of this manual).  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
WHAT IS COVERED—The entire REEBOK® V 4000 (“Product”) is warranted to be free of all defects in material and work-  
manship.  
WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.  
HOW LONG IS IT COVERED—ICON Health & Fitness, Inc. (“ICON”), warrants the frame for a lifetime. The motor for five  
years after the date of purchase. The belt and deck are covered for two years after the date of purchase. All mechanical  
components are covered for two years after the date of purchase. All electrical components are covered for two years after  
the date of purchase. Labor is covered for one year.  
WHAT WE DO TO CORRECT COVERED DEFECTS—We will ship to you, without charge, any replacement part or com-  
ponent, providing the repairs are authorized by ICON first and are performed by an ICON trained and authorized service  
provider, or, at our option, we will replace the Product.  
WHAT IS NOT COVERED—Any failures or damage caused by unauthorized service, misuse, accident, negligence, im-  
proper assembly or installation, alterations, modifications without our written authorization or by failure on your part to use,  
operate, and maintain as set out in your User’s Manual (“Manual”).  
WHAT YOU MUST DO—Always retain proof of purchase, such as your bill of sale; store, operate, and maintain the  
Product as specified in the Manual; notify our Customer Service Department of any defect within 10 days after discovery of  
the defect; as instructed, return any defected part for replacement or, if necessary, the entire product, for repair.  
USER’S MANUAL—It is VERY IMPORTANT THAT YOU READ THE MANUAL before operating the Product. Remember to  
do the periodic maintenance requirements specified in the Manual to assure proper operation and your continued satisfac-  
tion.  
HOW TO GET PARTS AND SERVICE—Simply call our Customer Service Department at 1-800-999-3756 and tell them  
your name and address and the serial number of your Product. They will tell you how to get a part replaced, or if necessary,  
arrange for service where your Product is located or advise you how to ship the Product for service. Before shipping, al-  
ways obtain a Return Authorization Number (RA No.) from our Customer Service Department; securely pack your Product  
(save the original shipping carton if possible); put the RA No. on the outside of the carton and insure the product. Include a  
letter explaining the product or problem and a copy of your proof of purchase if you believe the service is covered by war-  
ranty.  
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use  
or performance of the product or damages with respect to any economic loss, loss of property, loss of revenues or profits,  
loss of enjoyment or use, costs of removal, installation or other consequential damages of whatsoever nature. Some states  
do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not  
apply to you.  
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or  
fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow  
limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to you.  
No one is authorized to change, modify or extend the terms of this limited warranty.  
This warranty gives you specific legal rights and you may have other rights which vary from state to state.  
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813  
Part No. 183495 R0502A  
Printed in USA © 2002 ICON Health & Fitness, Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXPLODED DRAWING—MODEL NO. RBTL17910  
R0502A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXPLODED DRAWING—MODEL NO. RBTL17910  
R0502A  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Razor Motorcycle MX350 15128050 User Guide
RBH Sound Speaker MC 616 User Guide
RCA Universal Remote RCR311W User Guide
RCA VCR VR538 User Guide
RocketFish Headphones RF WHP01 User Guide
Samsung Camcorder WB2100 User Guide
Samsung MP3 Player YP T4 User Guide
Sanyo Air Conditioner C1872 User Guide
SATO Printer CL4e User Guide
Schumacher Power Supply 00 99 000674 User Guide