Model No. RBBE0405.0
Serial No.
Write the serial number in the
space above for future reference.
USER’S MANUAL
Serial Number Decal (Under Seat)
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if a part is
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-877-994-4999
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read the following important precautions
before using the weight bench.
1. Read all instructions in this manual and all
warnings on the weight bench before using
the weight bench. Use the weight bench only
as described in this manual.
6. Inspect and properly tighten all parts regular-
ly. Replace any worn parts immediately.
7. Keep children under 12 and pets away from
the weight bench at all times.
2. It is the responsibility of the owner to ensure
that all users of the weight bench are ade-
quately informed of all precautions.
8. Always wear athletic shoes for foot protec-
tion while exercising.
3. The weight bench is intended for home use
only. Do not use the weight bench in any
commercial, rental, or institutional setting.
9. The weight bench is designed to support a
maximum user weight of 300 pounds. Do not
use more than 110 pounds of weight with the
weight bench. Note: The weight bench does
not include weights.
4. Keep the weight bench indoors, away from
moisture and dust. Place the weight bench
on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is enough clearance around the weight
bench to mount, dismount, and use the
weight bench.
10. Always make sure that the locking pin is fully
inserted into the pivot bracket and the bench
frame before exercising.
11. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cool-
ing down.
5. Keep hands and feet away from moving parts.
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for selecting the versatile REEBOK®
ADJUSTABLE BODY TONING BENCH weight bench.
The weight bench is designed to help develop the
major muscle groups of the upper body. Whether your
goal is to tone your body, build dramatic muscle size
and strength, or improve your cardiovascular system,
the weight bench will help you to achieve the specific
results you want.
al. To help us assist you, please note the product
model number and serial number before calling. The
model number is RBBE0405.0. The serial number can
be found on a decal attached to the weight bench (see
the front cover of this manual).
To avoid a registration fee for any service needed
under warranty, you must register the weight
For your benefit, read this manual carefully before
using the weight bench. If you have questions after
reading this manual, see the front cover of this manu-
Before reading further, review the drawing below and
familiarize yourself with the parts that are labeled.
Backrest
Seat
Front Leg
Foam Pad
Pivot Bracket
ASSEMBLED DIMENSIONS:
Height: 40 in. / 102 cm
Width: 18 in. / 46 cm
Depth: 52 in. / 132 cm
4
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
Make Things Easier for Yourself
This manual is designed to ensure that the
weight bench can be assembled successfully
by anyone. Most people find that by setting
aside plenty of time, assembly will go smoothly.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
Assembly may require the following tools (not
included):
To hire an authorized service technician to
assemble the weight bench, call toll-free
1-800-445-2480.
• two adjustable wrenches
• one rubber mallet
Before beginning assembly, carefully read the
following information and instructions:
• one standard screwdriver
• Assembly requires two people.
• one Phillips screwdriver
• For help identifying small parts, use the PART
IDENTIFICATION CHART.
• lubricant, such as grease or petroleum jelly,
and soapy water.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
1.
1
Before assembling this product, make sure
that you understand the information in the
box above.
2
Name
Decal
Press two 56mm Round Outer Caps (14) onto the
Front Stabilizer (1).
18
Attach the Front Stabilizer (1) to the Front Leg (2)
with two M8 x 67mm Carriage Bolts (21) and two
M8 Nylon Locknuts (18). Make sure the indents
in the Stabilizer and the decal on the Front Leg
are in the positions shown. Do not tighten the
Locknuts yet.
18
14
1
14
Indents
21
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press two 56mm Round Outer Caps (14) onto the
Rear Stabilizer (5).
2
14
5
Indents
18
Make sure the indents and the decal on the
Rear Stabilizer (5) are oriented as shown.
Attach the Rear Stabilizer to the Bench Frame (4)
with two M8 x 67mm Carriage Bolts (21) and two
M8 Nylon Locknuts (18). Do not tighten the
Locknuts yet.
4
21
18
Warning
Decal
14
3. Attach the Seat Frame (3) to the Bench Frame
(4) with two M8 x 63mm Bolts (25), two M8
Washers (20), and two M8 Nylon Locknuts (18).
Do not tighten the Locknuts yet. Make sure
that the bolt heads rest inside the holes in the
top of the Bench Frame.
3
25
4
3
20
24
20
18
4. Attach the Seat Frame (3) to the Front Leg (2)
with two M8 x 71mm Bolts (24), two M8 Washers
(20), and two M8 Nylon Locknuts (18).
4
20
Tighten the M8 Nylon Locknuts (18) used in
steps 1, 2, and 4. Then, tighten the M8 Nylon
Locknuts (18) used in step 3.
18
3
24
20
2
5. Orient a Backrest Frame (7) with the indicated
hole closer to the bottom of the Frame. Attach the
Frame to the Pivot Bracket (6) with two M8 x
43mm Bolts (26), two M8 Washers (20), and two
M8 Nylon Locknuts (18). Do not tighten the
Locknuts yet.
5
7
7
Hole
Attach the other Backrest Frame (7) to the
Pivot Bracket (6) in the same manner.
20
6
20
18
26
6
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Attach the Backrest (9) to the Backrest Frames
(7) with four M6 x 37mm Screws (27) and four M6
Washers (30). Make sure the Backrest is ori-
ented as shown. Do not tighten the Screws
yet.
6
9
7
30
30
30
30
27
27
7. Insert the Pivot Bracket (6) through the slot in the
Bench Frame (4).
7
Grease the M10 x 187mm Bolt (28) with the
included grease packet. Attach the Backrest
Frames (7) to the tube on the Bench Frame (4)
with the Bolt, two M10 Washers (19), and an M10
Nylon Locknut (17). Do not overtighten the
Locknut; the Backrest Frames must be able to
pivot easily.
7
17
19
Slot
4
Tighten the M8 Nylon Locknuts (18) used in
step 5, and the four M6 x 37mm Screws (27)
used in step 6.
19
Grease
6
Tube
28
8. Attach the Locking Pin (15) to the Bench Frame
(4) with an M4 Washer (31) and an M4 x 16mm
Self-tapping Screw (22). Insert the Pin through
the Bench Frame and the Pivot Bracket (6).
8
4
15
31
6
22
9. Attach an M8 x 15mm Bolt (29) to the Pivot
Bracket (6) with an M8 Nylon Locknut (18).
9
6
18
29
7
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Attach the Seat (8) to the Seat Frame (3) with
four M6 x 16mm Screws (23).
10
8
3
23
23
11. Insert a Pad Tube (10) into the Front Leg (2).
Slide two Foam Pads (11) onto the ends of the
Pad Tube.
11
10
Assemble the other Pad Tube (10) to the Front
Leg (2) in the same manner.
11
2
10
11
12. Make sure all parts are properly tightened
before the weight bench is used.
.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTMENTS
This section explains how to adjust the weight bench. See the EXERCISE GUIDELINES on page 10 for impor-
tant information about how to get the most benefit from your exercise program. Also, refer to the accompanying
exercise guide to see the correct form for each exercise.
Make sure all parts are properly tightened each time the weight bench is used. Replace any worn parts immediate-
ly. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents.
ADJUSTING THE BACKREST
To adjust the Backrest (9), remove the Locking Pin
9
(15) from the Bench Frame (4). Move the Backrest to
the desired position and reinsert the Locking Pin into
the Bench Frame and an adjustment hole in the Pivot
Bracket (6).
WARNING:
Always make sure the
Locking Pin (15) is fully inserted through the
Bench Frame (4) and the Pivot Bracket (6).
4
15
6
Adjustment
Holes
9
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE GUIDELINES
THE FOUR BASIC TYPES OF WORKOUTS
PERSONALIZING YOUR EXERCISE PROGRAM
Muscle Building
To increase the size and strength of your muscles,
Determining the exact length of time for each workout,
as well as the number of repetitions or sets completed,
push them close to their maximum capacity. Your mus- is an individual matter. It is important to avoid overdo-
cles will continually adapt and grow as you progres-
sively increase the intensity of your exercise. You can
adjust the intensity level of an individual exercise in
two ways:
• by changing the amount of resistance used
• by changing the number of repetitions or sets per-
formed. (A “repetition” is one complete cycle of an
exercise, such as one sit-up. A “set” is a series of
repetitions.)
ing it during the first few months of your exercise pro-
gram. You should progress at your own pace and be
sensitive to your body’s signals. If you experience pain
or dizziness at any time while exercising, stop immedi-
ately and begin cooling down. Find out what is wrong
before continuing. Remember that adequate rest and a
proper diet are important factors in any exercise pro-
gram.
WARMING UP
The proper amount of resistance for each exercise
depends upon the individual user. You must gauge
your limits and select the amount of resistance that is
Begin each workout with 5 to 10 minutes of stretching
and light exercise to warm up. Warming up prepares
right for you. Begin with 3 sets of 8 repetitions for each your body for more strenuous exercise by increasing
exercise you perform. Rest for 3 minutes after each
set. When you can complete 3 sets of 12 repetitions
without difficulty, increase the amount of resistance.
circulation, raising your body temperature and deliver-
ing more oxygen to your muscles.
WORKING OUT
Toning
You can tone your muscles by pushing them to a mod- Each workout should include 6 to 10 different exercis-
erate percentage of their capacity. Select a moderate
amount of resistance and increase the number of rep-
etitions in each set. Complete as many sets of 15 to
20 repetitions as possible without discomfort. Rest for
1 minute after each set. Work your muscles by com-
es. Select exercises for every major muscle group,
emphasizing areas that you want to develop most. To
give balance and variety to your workouts, vary the
exercises from session to session.
pleting more sets rather than by using high amounts of Schedule your workouts for the time of day when your
resistance.
energy level is the highest. Each workout should be
followed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.
Weight Loss
To lose weight, use a low amount of resistance and
increase the number of repetitions in each set.
Exercise for 20 to 30 minutes, resting for a maximum
of 30 seconds between sets.
EXERCISE FORM
Maintaining proper form is an essential part of an
effective exercise program. This requires moving
through the full range of motion for each exercise, and
Cross Training
Cross training is an efficient way to get a complete and moving only the appropriate parts of the body.
well-balanced fitness program. An example of a bal-
anced program is:
• Plan strength training workouts on Monday,
Wednesday, and Friday.
• Plan 20 to 30 minutes of aerobic exercise, such as
running on a treadmill or riding on an exercise cycle
or an elliptical exerciser, on Tuesday and Thursday.
Exercising in an uncontrolled manner will leave you
feeling exhausted. On the exercise guide accompany-
ing this manual you will find photographs showing the
correct form for several exercises, and a list of the
muscles affected. Refer to the muscle chart on the
next page to find the names of the muscles.
• Rest from both strength training and aerobic exercise The repetitions in each set should be performed
for at least one full day each week to give your body
time to regenerate.
smoothly and without pausing. The exertion stage of
each repetition should last about half as long as the
return stage. Proper breathing is important. Exhale
The combination of strength training and aerobic exer- during the exertion stage of each repetition and inhale
cise will reshape and strengthen your body, plus devel- during the return stroke. Never hold your breath.
op your heart and lungs.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Rest for a short period of time after each set. The
ideal resting periods are:
• Rest for three minutes after each set for a muscle
building workout.
slowly as you stretch and do not bounce. Ease into
each stretch gradually and go only as far as you can
without strain. Stretching at the end of each workout
is an effective way to increase flexibility.
• Rest for one minute after each set for a toning work-
out.
STAYING MOTIVATED
• Rest for 30 seconds after each set for a weight loss
workout.
Plan to spend the first couple of weeks familiarizing
yourself with the equipment and learning the proper
form for each exercise.
For motivation, keep a record of each workout. List the
date, the exercises performed, the resistance used,
and the numbers of sets and repetitions completed.
Record your weight and key body measurements at
the end of every month. Remember, the key to achiev-
ing the greatest results is to make exercise a regular
and enjoyable part of your everyday life.
COOLING DOWN
End each workout with 5 to 10 minutes of stretching.
Include stretches for both your arms and legs. Move
MUSCLE CHART
O
A. Sternomastoid (neck)
A
B. Pectoralis Major (chest)
C. Biceps (front of arm)
D. Obliques (waist)
P
L
Q
B
E. Brachioradials (forearm)
F. Hip Flexors (upper thigh)
G. Abductor (outer thigh)
H. Quadriceps (front of thigh)
I. Sartorius (front of thigh)
J. Tibialis Anterior (front of calf)
K. Soleus (front of calf)
R
S
C
D
E
T
F
M
N
U
L. Anterior Deltoid (shoulder)
M. Rectus Abdominus (stomach)
N. Adductor (inner thigh)
G
H
I
V
O. Trapezius (upper back)
P. Rhomboideus (upper back)
Q. Posterior Deltoid (shoulder)
R. Triceps (back of arm)
S. Latissimus Dorsi (mid back)
T. Spinae Erectors (lower back)
U. Gluteus Medius (hip)
W
X
J
K
V. Gluteus Maximus (buttocks)
W. Hamstring (back of leg)
X. Gastrocnemius (back of calf)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST. Note: Some small parts may have been pre-attached.
If a part is not in the parts bag, check to see if it has been pre-attached.
M8 x 71mm Bolt (24)
M10 Washer (19)
M8 x 67mm Carriage Bolt (21)
M8 x 63mm Bolt (25)
M8 Washer (20)
M8 x 43mm Bolt (26)
M4 Washer (31)
M6 x 37mm Screw (27)
M6 Washer (30)
M6 x 16mm Screw (23)
M10 Nylon Locknut (17)
M8 Nylon Locknut (18)
M4 x 16mm Self-tapping Screw (22)
M8 x 15mm Bolt (29)
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LIST—Model No. RBBE0405.0
R0605B
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
1
1
1
1
1
1
2
1
1
2
4
4
1
4
1
4
1
Front Stabilizer
Front Leg
Seat Frame
Bench Frame
Rear Stabilizer
Pivot Bracket
Backrest Frame
Seat
Backrest
Pad Tube
Foam Pad
19mm Round Inner Cap
56mm Round Inner Cap
56mm Round Outer Cap
Locking Pin
25mm Square Inner Cap
M10 Nylon Locknut
18
19
20
21
22
23
24
25
26
27
28
29
30
31
#
13
2
8
4
1
4
2
2
4
4
1
1
4
1
1
1
1
M8 Nylon Locknut
M10 Washer
M8 Washer
M8 x 67mm Carriage Bolt
M4 x 16mm Self-tapping Screw
M6 x 16mm Screw
M8 x 71mm Bolt
M8 x 63mm Bolt
M8 x 43mm Bolt
M6 x 37mm Screw
M10 x 187mm Bolt
M8 x 15mm Bolt
M6 Washer
M4 Washer
User’s Manual
Exercise Guide
Grease Packet
#
#
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of this manual for information about ordering replacement parts.
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING—Model No. RBBE0405.0
R0605B
9
16
30
26
7
30
20
17
19
20
30
27
26
30
19
16
28
27
18
18
18
6
29
8
11
11
12
12
14
25
10
18
5
4
13
12
21
24
3
18
20
20
10
15
18
20
12
24
23
18
14
31
23
22
2
18
18
11
14
11
1
14
21
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING REPLACEMENT PARTS
To order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to give
the following information:
1. the MODEL NUMBER of the product (RBBE0405.0)
2. the NAME of the product (REEBOK ADJUSTABLE BODY TONING BENCH weight bench)
3. the SERIAL NUMBER of the product (see the front cover of this manual)
4. the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and EXPLODED DRAWING in the
center of this manual)
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and mate-
rial, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This
warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing
or repairing, at ICON's option, the product through one of its authorized service centers. All repairs for which
warranty claims are made must be pre-authorized by ICON. If the product is shipped to a service center,
freight charges to and from the service center will be the customer’s responsibility. For in-home service, the
customer will be responsible for a minimal trip charge. This warranty does not extend to any product or dam-
age to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or
repairs not provided by an ICON authorized service center; products used for commercial or rental purposes;
or products used as store display models. No other warranty beyond that specifically set forth above is author-
ized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection
with the use or performance of the product or damages with respect to any economic loss, loss of property,
loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other consequential
damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or conse-
quential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of mer-
chantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein.
Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation
may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 228203 R0605B
Printed in China © 2004 ICON IP, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|