Pro Series Scooters
Owner’s Manual
Read and understand this entire manual before
allowing child to use this product!
For assistance contact Razor. DO NOT RETURN TO STORE.
NOTE: Illustrations are for demonstration purposes only. Specifications subject
to change without notice.
v.1_09-11
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE yOU BEgIN
Remove contents from box. Inspect the contents of the box for scratches in the paint and/or dents that may have
occurred during shipping. Because your scooter was partially assembled and packed at the factory, there should not be
any problems, even if the box has a few scars or dents.
WaRNINg: DO
NOT USE NON-RAZOR
PRODUCTS WITH YOUR
SCOOTER.
Grips
Razor scooters have been built to
certain Razor design specifications.
The original equipment supplied at
the time of sale was selected on
the basis of its compatibility with
the frame, fork and all other parts.
Certain aftermarket products may
or may not be compatible and will
void your warranty.
T-tube/ Steering column
Handlebar
Down tube
Collar clamp
Rear fender/brake
Fork headset locknut
Front fork
Deck
Wheels and
wheel bearings
q Required Tools
5mm
Allen wrench
aSSEmBly INSTRUCTIONS
q Double Collar Clamp
WaRNINg: Failure to
properly install and tighten the
collar clamp may cause the rider to
lose control and fall. If you do not
understand these instructions or
the concept of “tighten securely”
seek the assistance of a qualified
mechanic.
1 Loosen the collar clamp and
slide it upward. With a clock-wise
twisting motion, push and “thread”
the T-tube onto the fork until it
bottoms out on the fork headset
lock nut.
2 With the front wheel pointed
straight ahead, the handlebars
square to the front wheel and the
Razor logo facing the front, tighten
the clamp as shown. Tighten each
bolt securely.
toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
aSSEmBly INSTRUCTIONS
q Triple Collar Clamp (on select models only)
1 Loosen the collar clamp and
slide it upward. With a clock-wise
twisting motion, push and “thread”
the T-tube onto the fork until it
bottoms out on the fork headset
lock nut.
2 With the front wheel pointed
straight ahead, the handlebars
square to the front wheel and the
Razor logo facing the front, tighten
the clamp as shown. Tighten each
bolt securely.
q Quad Collar Clamp (on select models only)
1 Loosen the collar clamp and
slide it upward. With a clock-wise
twisting motion, push and “thread”
the T-tube onto the fork until it
bottoms out on the fork headset
lock nut.
2 With the front wheel pointed
straight ahead, the handlebars
square to the front wheel and the
Razor logo facing the front, tighten
the clamp as shown. Tighten each
bolt securely.
CHECk BEFORE RIDINg
q Double Collar Clamp
Using a 5mm Allen wrench, check that the collar clamp bolta are tightened securely.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CHECk BEFORE RIDINg
q Triple Collar Clamp (on select models only)
Using a 5mm Allen wrench, check that the collar clamp bolts are tightened securely.
q Quad Collar Clamp (on select models only)
Using a 5mm Allen wrench, check that the collar clamp bolts are tightened securely.
q Wheels and Bearings
Under normal circumstances and conditions, Razor wheels and wheel bearings are maintenance free. Nonetheless, it
is the responsibility of the owner or guardian to periodically inspect the wheels for wear and tear, the axle for proper
tightness and bearings for side-to-side play and loose parts. When a wheel or wheel bearing develops play, this is an
indication of excess wear and replacement is necessary. Replace immediately with only genuine Razor wheels. Worn
wheels/bearings are considered normal wear-and-tear and are not covered by the Razor Warranty. Wheels other than
genuine Razor wheels may not be compatible with your Razor scooter. The use of anything other than genuine Razor
replacement parts may affect your safety and will void your warranty.
q Cleaning your Scooter
Wipe with a damp cloth to remove dirt and dust.
Do not use industrial cleaners or solvents as they may damage the surfaces. Do not use alcohol, alcohol-based or am-
monia-based cleaners as they may damage or dissolve the plastic components or soften the decals or decal adhesive.
WaRNINg: Wheelies
and other stunt-type riding reduces
your ability to maneuver and control
your scooter. Take the necessary
precautions, such as wearing
appropriate protective gear and
practice in an area safe for stunt
riding and free from obstructions.
q How to Ride
Place one foot on the baseboard, push forward with the other foot. Steer. For enhanced cornering, lean slightly into the
direction of the turn. For controlled stops, apply the brake by stepping on the rear fender/brake. Razor recommends that
you practice applying the brake at various speeds and in an open area free from obstructions before riding your Razor
scooter around others.
toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SaFETy REmINDERS
PRE-RIDE CHECklIST
loose Parts
Be Careful!
Check and secure all fasteners before every ride. Make sure the
collar clamp is locked properly in place before riding.
You will see people on TV and maybe even people you know doing
tricks and stunts. These are people who have been practicing on
scooters for a very long time. Don’t try something until you are
ready. Avoid steep inclines and don’t ride too fast — you can lose
control and fall. Skateboard parks are not designed for scooters.
Never ride in traffic or on the street and watch your surroundings
for pedestrians, bikers, boarders and skaters.
q
q
Replacement Parts
Replace worn or broken parts immediately. Visit
Safety gear
Maintain a hold on the handlebars at all times.
Always wear proper protective equipment such as an approved
q safety helmet, elbow pads and kneepads. Always wear shoes
(lace-up with rubber soles), never ride barefooted or in sandals,
and keep shoelaces tied and out of the way of the wheels.
DO NOT RETURN TO STORE
Failure to follow these instructions may damage
your product and void your warranty.
WaRRaNTy
Razor limited Warranty
Razor does not offer an extended warranty. If you have purchased an
extended warranty, it must be honored by the store at which it was
purchased.
The manufacturer warranties this product to be free of manufacturing defects
for a period of 6 months from date of purchase. This Limited Warranty does
not cover normal wear and tear, or any damage, failure or loss caused by
improper assembly, maintenance, or storage.
For your records, save your original sales receipt with this manual.
__________________________________________
This Limited Warranty will be void if the product is ever
• used in a manner other than for recreation;
• modified in any way;
• rented.
The manufacturer is not liable for incidental or consequential loss or damage
due directly or indirectly to the use of this product.
toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
Printed in China for:
Razor USA LLC
Copyright © 2003-2012 Razor USA, LLC. All rights reserved. RAZOR and the Razor Logo
Design are among the registered trademarks of Razor USA LLC in the United States and/or
select foreign countries.
09/2011
5
Download from Www.Somanuals.com. All Manuals Search And Download.
|