Radio Shack Stereo Amplifier PPA200 User Guide

PPA450  
4500 Watt  
Limited Warranty  
P
P
P
P
P
P
A
A
A
2
3
4
0
0
5
0
0
0
A
A
A
m
m
m
p
p
p
l
l
l
i
i
i
f
f
f
i
i
i
e
e
e
r
r
r
All PYLE PRO products are carefully constructed and tested before  
shipment. Units purchased in the USA are warranted to be free of  
defects in material and workmanship for two (2) years from the date  
of purchase. This warranty is limited to the original retail purchaser  
of the amplifier.  
Should the unit fail due to factory defects in material or workmanship,  
your unit will be repaired or replaced at the sole discretion of PYLE.  
To obtain warranty service, you must first call our Consumer Return  
Hotline at (718) 236-6948 to obtain a Return Authorization Number.  
This R.A. # must appear on the outside of your package and on all  
paperwork relating to your return.  
When returning the unit to us for warranty service, it must be carefully  
packed and shipped, prepaid, to:  
R.A.#: _____________  
PYLE PRO Service Center  
1600 63rd Street  
Brooklyn, NY 11204  
You must also include the following items with your return:  
A copy of your sales receipt or other proof of purchase  
A brief letter, indicating the problem you are experiencing  
with the product  
Include in your letter your return address, daytime phone  
number and R.A. number  
Also include a check or money order for $15.00 for return  
shipping, handling and insurance, or provide your Visa/MC  
number with expiration date.  
Our obligation under this warranty is limited to the repair or replacement  
of the defective unit when it is returned to us prepaid. This warranty  
will be considered void if the unit was tampered with, improperly  
serviced or subject to misuse, neglect or accidental damage.  
Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Amplifier Specifications  
PPA 200  
PPA 300  
PPA 450  
Input Impedance, balanced (unbalanced)  
20 k-Ohms (10 k-Ohms)  
20 k-Ohms (10 k-Ohms)  
20 k-Ohms (10 k-Ohms)  
Connecting to standard AC power  
MONO OPERATION  
After making all other connections, set the POWER switch  
to OFF position. Then connect the power cord to a standard  
AC outlet.  
Continuous Output Power  
Stereo Mode  
SWITCH IN “MONO” POSITION  
20 Hz to 20 kHz,  
8
Ohms  
70W x 2  
100W x 2  
110W x 2  
130W x 2  
800W x 2  
120W x 2  
160W x 2  
170W x 2  
200W x 2  
1200W x 2  
170W x 2  
220W x 2  
230W x 2  
260W x 2  
1600W x 2  
1
kHz, 4 Ohms  
Mounting the amplifier  
This amplifier is designed to accept standard rack mounting  
installations. Two slots on each end of the front panel make  
it suitable for such an installation.  
Maximum Power,  
Maximum Power,  
8
4
Ohms  
Ohms  
Peak Power,  
8
Ohms  
CH 2  
CH 1  
Tightly secure four mounting screws (not supplied) through  
these fours slots and into your standard electronics equipment  
rack.  
Bridged Mode  
20 Hz to 20 kHz,  
8
Ohms  
200W x 1  
200W x 1  
2000W x 1  
320W x 1  
320W x 1  
3000W x 1  
440W x 1  
440W x 1  
4500W x 1  
B
A
L
A
N
C
E
D
I
N
P
U
T
S
1
kHz,  
8
Ohms  
VOLTAGE  
P
O
W
E
R
C
O
N
S
-
U
M
N
P
T
I
O
N
:
INPUTS  
CH-1  
OUTPUTS  
BRIDGE  
~
3
A
0
C
V
i
6
1
1
5
/
2
0
/
5
0
H
z
CH-2  
CH-2  
CH-1  
Peak Power  
MONO  
CH  
CH  
-
-
1
STEREO  
BRIDGE  
GROUND LIFT  
GND  
2
LIFT  
Turning the amplifier on  
1. Turn on the audio input source equipment which is  
connected to the amplifier INPUT jacks.  
F
U
S
E
THD at rated output power  
Frequency Response +/–  
0.1%  
10 Hz to 50 kHz  
1.0V  
0.1%  
10 Hz to 50 kHz  
1.0V  
0.1%  
10 Hz to 50 kHz  
1.0V  
3
dB  
MONO SIGNAL SOURCE  
2. Set the amplifier’s Channel 1 and Channel 2 output level  
gain controls to the minimum level settings.  
USE  
CHANNEL 1  
INPUT ONLY  
Input Sensitivity for rated output power  
Signal-to-Noise Ratio A-Weighted  
3. Push in the power switch to turn the amplifier on.  
100 dB  
100 dB  
100 dB  
CAUTION! Do not use  
balanced and unbalanced  
inputs simultaneously!!  
Speaker Impedance  
Stereo  
Bridged  
4-16 Ohms  
8-16 Ohms  
4-16 Ohms  
8-16 Ohms  
4-16 Ohms  
8-16 Ohms  
Using the power LED meters  
Bridged Mode Operation  
The meter pointer position indicates the amplifier output  
power. For ease of reading in dark environments, the meter  
is illuminated.  
This amplifier can operate in a mono bridged output mode, if  
your speakers can handle the following power output levels:  
120VAC,60Hz/230VAC,50Hz  
120VAC,60Hz/230VAC,50Hz  
120VAC,60Hz/230VAC,50Hz  
Power Requirement  
PPA 200: 2000 watts  
PPA 300: 3000 watts  
PPA 450: 4500 watts  
Dimensions  
(mm)  
H
x
W
x
D, inches  
3
15/32 x 19 x 10 11/16  
(88 x 482 x 271)  
3
15/32 x 19 x 10 11/16  
(88 x 482 x 271)  
3
15/32 x 19 x 10 11/16  
(88 x 482 x 271)  
Using the Channel 1 and Channel 2 Output Level controls  
Rotate output level gain clockwise to increase, or counter-  
clockwise to decrease the output power. To get the best  
performance with the least sound distortion, always adjust  
the output level gain so the meter's pointer does not  
continuously exceed the extreme right of the meter's scale.  
Weight, lbs (kg)  
16.7 Ibs (7.6)  
18.5 Ibs (8.4)  
20 Ibs (9.1)  
As shown in the diagram below, connect the speaker's positive  
(+) to the amplifier's red speakers left (1/2) terminals and  
negative (-) to red speakers right (1/2) terminals.  
The speaker right (+) on the amplifier is used as a negative (-)  
terminal for a bridged connection.  
CAUTION: It is possible to overdrive the amplifier by  
setting output level gain too high, which may cause  
damage or failure.  
MONO BRIDGED OPERATION  
SWITCH IN “BRIDGED” POSITION  
About the internal protect circuitry  
Special clip circuitry incorporated into your PYLE PPA  
amplifier’s design protects the amplifier and speaker system  
from being damaged from overdriving power.  
DO NOT USE  
BLACK TERMINALS  
Under normal conditions, the amplifier’s clip indicator will  
flicker as the output power momentarily exceeds the level  
as set by the output level gain selector.  
B
A
L
A
N
C
E
D
I
N
P
U
T
S
VOLTAGE  
P
O
W
E
R
C
O
N
S
-
U
M
N
P
T
I
O
N
:
INPUTS  
CH-1  
OUTPUTS  
BRIDGE  
~
3
A
0
C
V
i
6
1
1
5
/
2
0
/
5
0
H
z
CH-2  
CH-2  
CH-1  
However, under excessive output conditions, the protect  
indicator lights remain on continuously, alerting you that  
the special clip circuitry has become active. When this  
occurs, you should simply reduce the output power level  
by rotating the Master Volume control counterclockwise.  
MONO  
CH  
CH  
-
-
1
STEREO  
BRIDGE  
GROUND LIFT  
GND  
2
LIFT  
F
U
S
E
MONO SIGNAL SOURCE  
USE  
CHANNEL 1  
INPUT ONLY  
CAUTION! Do not use  
balanced and unbalanced  
inputs simultaneously!!  
3-PYLE PPA Amplifier Owner’s Manual  
PYLE PPA Amplifier Owner’s Manual-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Surge Protector 61 2425 User Guide
Radio Shack Video Game Keyboard MD 1210 User Guide
RCA Cassette Player VR642HF User Guide
Redring Plumbing Product 520M User Guide
Roland TV Converter Box VC 300HD User Guide
Russell Hobbs Coffeemaker 10881 User Guide
Samson Microphone SE50 User Guide
Samsung Refrigerator RA19F RA19V User Guide
Schumacher Battery Charger SS 15A1 OB User Guide
Sennheiser Headphones 502874 User Guide